; This is a sample ~/.gammurc file. ; In Unix/Linux copy it into your home directory and name it .gammurc ; or into /etc and name it gammurc ; In Win32 copy it into directory with Gammu.exe and name gammurc ; More about parameters later ; Anything behind ; or # is comment. ; ----------------------------------------------------------------------------- [gammu] device = /dev/ttyUSB0 connection = at115200 ; Do not use model configuration unless you really need it ;model = 6110 ;synchronizetime = yes ;logfile = gammulog ;logformat = textall ;use_locking = yes ;gammuloc = locfile ;startinfo = yes ;gammucoding = utf8 ;usephonedb = yes ;[gammu1] ;device = com8: ;model = 6110 ;connection = fbusblue ;synchronizetime = yes ;logfile = gammulog ;logformat = textall ;use_locking = yes ;gammuloc = locfile ;startinfo = yes ;gammucoding = utf8 ; Step 1. Please find required Connection parameter and look into assigned ; with it device type. With some Connection you must set concrete model ; ================================================================ cables ===== ; New Nokia protocol for FBUS/DAU9P ; Connection "fbus", device type serial ; New Nokia protocol for DLR3/DLR3P ; Connection "fbusdlr3"/"dlr3", device type serial ; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard ; like 6230) ; Connection "dku2phonet"/"dku2", device type dku2 on Windows ; Connection "fbususb" on Linux ; New Nokia protocol for DKU5 (and phone without USB converter on phone ; mainboard like 5100) ; Connection "dku5fbus"/"dku5", device type dku5 ; New Nokia protocol for PL2303 USB cable (and phone without USB converter ; on phone mainboard like 5100) ; Connection "fbuspl2303", device type usb ; Old Nokia protocol for MBUS/DAU9P ; Connection "mbus", device type serial ; Variants: ; You can modify a bit behaviour of connection using additional flags ; specified just after connection name like connection-variant. ; If you're using ARK3116 cable (or any other which does not like dtr ; handling), you might need -nodtr variant of connection, eg. dlr3-nodtr. ; If cable you use is not powered over DTR/RTS, try using -nopower variant of ; connection, eg. fbus-nopower. ; ----------------------------------------------------------------------------- ; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None ; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc. ; Connection "at19200"/"at115200"/.., device type serial ; AT commands for DKU2 cable ; Connection "dku2at", device type dku2 ; ============================================================== infrared ===== ; Nokia protocol for infrared with Nokia 6110/6130/6150 ; Connection "fbusirda"/"infrared", device type serial ; Nokia protocol for infrared with other Nokia models ; Connection "irdaphonet"/"irda", device type irda ; ----------------------------------------------------------------------------- ; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc. ; Connection "irdaat", device type irda ; ----------------------------------------------------------------------------- ; OBEX for infrared ; Connection "irdaobex", device type irda. ; ============================================================= Bluetooth ===== ; Nokia protocol with serial device set in BT stack (WidComm, other) from ; adequate service and Nokia 6210 ; Connection "fbusblue", device type serial ; Nokia protocol with serial device set in BT stack (WidComm, other) from ; adequate service and other Nokia models ; Connection "phonetblue", device type serial ; ----------------------------------------------------------------------------- ; Nokia protocol for Bluetooth stack with Nokia 6210 ; Connection "bluerffbus", device type BT ; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform ; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..) ; Connection "bluerfphonet", device type BT ; Nokia protocol for Bluetooth stack with other DCT4 Nokia models ; Connection "bluephonet", device type BT ; ----------------------------------------------------------------------------- ; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't ; inform about BT services correctly (6310, 6310i with firmware lower ; than 5.50, 8910,..) ; Connection "bluerfat", device type BT ; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.) ; Connection "blueat", device type BT ; ----------------------------------------------------------------------------- ; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about ; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...) ; Connection "bluerfobex", device type BT ; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.) ; Connection "blueobex", device type BT. ; ----------------------------------------------------------------------------- ; Connection "bluerfgnapbus", device type BT, model "gnap" ; Connection "irdagnapbus", device type irda, model "gnap" ; Step2. According to device type from Step1 and used OS set Port parameter ; ----------------------------------------------------------------------------- ; Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix ; ----------|---------------------------------|-------------------------------- ; serial | "com*:" | "/dev/ttyS*" ; | (example "com1:") | (example "/dev/ttyS1") ; | | or "/dev/tts/**" (with DevFS) ; | | virtual serial ports like ; | | "/dev/ircomm*" or "/dev/rfcomm*" ; ----------|---------------------------------|-------------------------------- ; irda | ignored (can be empty) | ignored (can be empty) ; ----------|---------------------------------|-------------------------------- ; BT | Bluetooth device address (example "00:11:22:33:44:55"). ; | Optionally you can also include channel after slash ; | (example "00:11:22:33:44:55/12"). Can be also empty. ; ----------|---------------------------------|-------------------------------- ; dku2 | ignored (can be empty) | /dev/ttyUSB* or /dev/ttyACM* ; ----------|---------------------------------|-------------------------------- ; dku5 | ignored (can be empty) | connection with it not possible ; ----------|---------------------------------|-------------------------------- ; usb | connection with it not possible | "/dev/ttyUSB*" ; Step3. Set other config parameters ; ----------------------------------------------------------------------------- ; Parameter name | Description ; ----------------|------------------------------------------------------------ ; Model | Should not be used unless you have a good reason to do so. ; | If Gammu doesn't recognize your phone model, put it here. ; | Example values: "6110", "6150", "6210", "8210" ; SynchronizeTime | if you want to set time from computer to phone during ; | starting connection. Do not rather use this option when ; | when to reset phone during connection (in some phones need ; | to set time again after restart) ; GammuLoc | name of localisation file ; StartInfo | this option allow to set, that you want (setting "yes") ; | to see message on the phone screen or phone should enable ; | light for a moment during starting connection. Phone ; | WON'T beep during starting connection with this option. ; GammuCoding | forces using specified codepage (in win32 - for example ; | "1250" will force CP1250) or UTF8 (in Linux - "utf8") ; ----------------|------------------------------------------------------------ ; Logfile | Use, when want to have logfile from communication. ; Logformat | What debug info and format should be used: ; | "nothing" - no debug level (default) ; | "text" - transmission dump in text format ; | "textall" - all possible info in text format ; | "errors" - errors in text format ; | "binary" - transmission dump in binary format ; ----------------|------------------------------------------------------------ ; Features | Custom features for phone. This can be used as override ; | when values coded in common/gsmphones.c are bad or ; | missing. Consult include/gammu-info.h for possible values ; | (all Feature values without leading F_ prefix). ; | Please report correct values to Gammu authors. ; ----------------|------------------------------------------------------------ ; Use_Locking | under Unix/Linux use "yes", if want to lock used device ; | to prevent using it by other applications. In win32 ignored ; vim: et ts=4 sw=4 sts=4 tw=78 spell spelllang=en_us