aboutsummaryrefslogtreecommitdiffstats
path: root/documentation/dev-manual/dev-manual-common-tasks.xml
diff options
context:
space:
mode:
authorScott Rifenbark <srifenbark@gmail.com>2016-08-22 14:55:05 -0700
committerRichard Purdie <richard.purdie@linuxfoundation.org>2016-08-25 23:09:29 +0100
commit9ba4fc087ef9609a4a4e7546ee00f9801c2dfac8 (patch)
tree1ef0856bfa8abce53db68ca252d395ad872c3a3d /documentation/dev-manual/dev-manual-common-tasks.xml
parentac0fa7a2965e9cd44cdaf0fcdb83cecd361bfdec (diff)
downloadopenembedded-core-contrib-9ba4fc087ef9609a4a4e7546ee00f9801c2dfac8.tar.gz
openembedded-core-contrib-9ba4fc087ef9609a4a4e7546ee00f9801c2dfac8.tar.bz2
openembedded-core-contrib-9ba4fc087ef9609a4a4e7546ee00f9801c2dfac8.zip
dev-manual, ref-manual: Systemd-boot: Update documents for new EFI bootloader
Fixes [YOCTO #9707] * Replaced gummiboot with systemd-boot in the dev-manual * Replaced the gummiboot class with a new systemd-boot class * Replaced the appropriate gummiboot variables in the glossary with new variables SYSTEMD_BOOT_CFG, SYSTEMD_BOOT_ENTRIES, and SYSTEMD_BOOT_TIMEOUT. (From yocto-docs rev: 778b620e65cc68531b3c41aeb8f27f2a07eb0d00) Signed-off-by: Scott Rifenbark <srifenbark@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Diffstat (limited to 'documentation/dev-manual/dev-manual-common-tasks.xml')
-rw-r--r--documentation/dev-manual/dev-manual-common-tasks.xml26
1 files changed, 13 insertions, 13 deletions
diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml b/documentation/dev-manual/dev-manual-common-tasks.xml
index 48d3ecb632..bd11062c41 100644
--- a/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -8777,19 +8777,19 @@
within a separately started QEMU or any
other virtual machine manager.
</para></listitem>
- <listitem><para><emphasis>"GummibootTarget":</emphasis>
- Choose "GummibootTarget" if your hardware is
+ <listitem><para><emphasis>"Systemd-bootTarget":</emphasis>
+ Choose "Systemd-bootTarget" if your hardware is
an EFI-based machine with
- <filename>gummiboot</filename> as bootloader and
+ <filename>systemd-boot</filename> as bootloader and
<filename>core-image-testmaster</filename>
(or something similar) is installed.
Also, your hardware under test must be in a
DHCP-enabled network that gives it the same IP
address for each reboot.</para>
- <para>If you choose "GummibootTarget", there are
+ <para>If you choose "Systemd-bootTarget", there are
additional requirements and considerations.
See the
- "<link linkend='selecting-gummiboottarget'>Selecting GummibootTarget</link>"
+ "<link linkend='selecting-systemd-boottarget'>Selecting Systemd-bootTarget</link>"
section, which follows, for more information.
</para></listitem>
<listitem><para><emphasis>"BeagleBoneTarget":</emphasis>
@@ -8835,12 +8835,12 @@
</para>
</section>
- <section id='selecting-gummiboottarget'>
- <title>Selecting GummibootTarget</title>
+ <section id='selecting-systemd-boottarget'>
+ <title>Selecting Systemd-bootTarget</title>
<para>
If you did not set <filename>TEST_TARGET</filename> to
- "GummibootTarget", then you do not need any information
+ "Systemd-bootTarget", then you do not need any information
in this section.
You can skip down to the
"<link linkend='qemu-image-running-tests'>Running Tests</link>"
@@ -8849,14 +8849,14 @@
<para>
If you did set <filename>TEST_TARGET</filename> to
- "GummibootTarget", you also need to perform a one-time
+ "Systemd-bootTarget", you also need to perform a one-time
setup of your master image by doing the following:
<orderedlist>
<listitem><para><emphasis>Set <filename>EFI_PROVIDER</filename>:</emphasis>
Be sure that <filename>EFI_PROVIDER</filename>
is as follows:
<literallayout class='monospaced'>
- EFI_PROVIDER = "gummiboot"
+ EFI_PROVIDER = "systemd-boot"
</literallayout>
</para></listitem>
<listitem><para><emphasis>Build the master image:</emphasis>
@@ -8920,7 +8920,7 @@
<para>
The final thing you need to do when setting
- <filename>TEST_TARGET</filename> to "GummibootTarget" is
+ <filename>TEST_TARGET</filename> to "Systemd-bootTarget" is
to set up the test image:
<orderedlist>
<listitem><para><emphasis>Set up your <filename>local.conf</filename> file:</emphasis>
@@ -8929,7 +8929,7 @@
<literallayout class='monospaced'>
IMAGE_FSTYPES += "tar.gz"
INHERIT += "testimage"
- TEST_TARGET = "GummibootTarget"
+ TEST_TARGET = "Systemd-bootTarget"
TEST_TARGET_IP = "192.168.2.3"
</literallayout>
</para></listitem>
@@ -9325,7 +9325,7 @@
The target controller object used to deploy
and start an image on a particular target
(e.g. QemuTarget, SimpleRemote, and
- GummibootTarget).
+ Systemd-bootTarget).
Tests usually use the following:
<itemizedlist>
<listitem><para><emphasis><filename>ip</filename>:</emphasis>