diff options
Diffstat (limited to 'meta-extras')
15 files changed, 492 insertions, 0 deletions
diff --git a/meta-extras/packages/prism-firmware/prism-firmware.bb b/meta-extras/packages/prism-firmware/prism-firmware.bb new file mode 100644 index 0000000000..903c55e15e --- /dev/null +++ b/meta-extras/packages/prism-firmware/prism-firmware.bb @@ -0,0 +1,32 @@ +DESCRIPTION = "Firmware for the Prism 2.x/3 cards" +SECTION = "base" +LICENSE = "closed" +RDEPENDS = "hostap-utils" +RREPLACES = "prism3-firmware prism3-support" +RCONFLICTS = "prism3-firmware prism3-support" +PACKAGE_ARCH = "all" +PR = "r3" + +SRC_URI = "http://www.red-bean.com/~proski/firmware/primary.tar.bz2 \ + http://www.red-bean.com/~proski/firmware/1.7.4.tar.bz2 \ + file://prism-fw.sh \ + file://hostap.rules" + +do_install() { + install -d ${D}${base_libdir}/firmware/ + install -d ${D}${base_libdir}/udev/ + install -d ${D}${sysconfdir}/pcmcia/ + install -d ${D}${sysconfdir}/udev/rules.d/ + + install -m 0644 ${WORKDIR}/primary/af010104.hex ${D}${base_libdir}/firmware/ + install -m 0644 ${WORKDIR}/primary/ak010104.hex ${D}${base_libdir}/firmware/ + install -m 0644 ${WORKDIR}/primary/pm010102.hex ${D}${base_libdir}/firmware/ + + install -m 0644 ${WORKDIR}/1.7.4/rf010704.hex ${D}${base_libdir}/firmware/ + + install -m 0755 ${WORKDIR}/prism-fw.sh ${D}${base_libdir}/udev/ + install -m 0644 ${WORKDIR}/hostap.rules ${D}${sysconfdir}/udev/rules.d/ +} + +PACKAGES = "${PN}" +FILES_${PN} += "${base_libdir}" diff --git a/meta-extras/packages/prism-firmware/prism-firmware/hostap.rules b/meta-extras/packages/prism-firmware/prism-firmware/hostap.rules new file mode 100644 index 0000000000..dece98ae93 --- /dev/null +++ b/meta-extras/packages/prism-firmware/prism-firmware/hostap.rules @@ -0,0 +1,4 @@ +# +# update firmware on Prism cards (load it to RAM, not to Flash) +# +SUBSYSTEM=="net", KERNEL=="wlan*" RUN="/lib/udev/prism-fw.sh" diff --git a/meta-extras/packages/prism-firmware/prism-firmware/prism-fw.sh b/meta-extras/packages/prism-firmware/prism-firmware/prism-fw.sh new file mode 100644 index 0000000000..619f612be1 --- /dev/null +++ b/meta-extras/packages/prism-firmware/prism-firmware/prism-fw.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +CARD_ID=`/usr/sbin/hostap_diag $INTERFACE|grep NICID|awk '{print $2}'|sed -e 's/id=0x//'` + +# 801d cards lack even Primary firmware so we cannot use hostap_diag +PRI=/lib/firmware/pm010102.hex +STA=/lib/firmware/rf010704.hex + +if [ $CARD_ID = '800c' ] || [ $CARD_ID = '8013' ] || [ $CARD_ID = '8017' ] || \ + [ $CARD_ID = '801b' ] || [ $CARD_ID = '8022' ] || [ $CARD_ID = '8023' ] ; then + PRI=/lib/firmware/ak010104.hex +elif [ $CARD_ID = '800b' ] || [ $CARD_ID = '8012' ] || [ $CARD_ID = '8016' ] || \ + [ $CARD_ID = '801a' ] ; then + PRI=/lib/firmware/af010104.hex +elif [ $CARD_ID = '800e' ] || [ $CARD_ID = '8015' ] || [ $CARD_ID = '8019' ] || \ + [ $CARD_ID = '801d' ] ; then + PRI=/lib/firmware/pm010102.hex +fi + +DIR=/proc/net/hostap/wlan0 + +if [ ! -d $DIR ]; then + exit 1 +fi + +if grep -q no_pri=1 $DIR/debug; then + /usr/sbin/prism2_srec -gs wlan0 $PRI + /usr/sbin/prism2_srec -gp wlan0 $PRI +fi + +/usr/sbin/prism2_srec -rp wlan0 $STA + diff --git a/meta-extras/packages/python/python-iniparse-native_0.3.2.bb b/meta-extras/packages/python/python-iniparse-native_0.3.2.bb new file mode 100644 index 0000000000..41aa13d97a --- /dev/null +++ b/meta-extras/packages/python/python-iniparse-native_0.3.2.bb @@ -0,0 +1,6 @@ +require python-iniparse_${PV}.bb +inherit native +DEPENDS = "python-native" +RDEPENDS = "" +PR = "r0" + diff --git a/meta-extras/packages/python/python-iniparse_0.3.2.bb b/meta-extras/packages/python/python-iniparse_0.3.2.bb new file mode 100644 index 0000000000..27a38f4249 --- /dev/null +++ b/meta-extras/packages/python/python-iniparse_0.3.2.bb @@ -0,0 +1,11 @@ +DESCRIPTION = "iniparse is a INI parser for Python" +HOMEPAGE = "http://code.google.com/p/iniparse/" +SECTION = "devel/python" +PRIORITY = "optional" +LICENSE = "GPL" +PR = "r0" + +SRC_URI = "http://iniparse.googlecode.com/files/iniparse-${PV}.tar.gz" +S = "${WORKDIR}/iniparse-${PV}" + +inherit distutils diff --git a/meta-extras/packages/python/python-urlgrabber-native_3.9.1.bb b/meta-extras/packages/python/python-urlgrabber-native_3.9.1.bb new file mode 100644 index 0000000000..ff8f02ecd7 --- /dev/null +++ b/meta-extras/packages/python/python-urlgrabber-native_3.9.1.bb @@ -0,0 +1,4 @@ +require python-urlgrabber_${PV}.bb +inherit native +DEPENDS = "python-native python-pycurl-native" +RDEPENDS = "" diff --git a/meta-extras/packages/python/python-urlgrabber/urlgrabber-3.0.0-cleanup.patch b/meta-extras/packages/python/python-urlgrabber/urlgrabber-3.0.0-cleanup.patch new file mode 100644 index 0000000000..7a1ee059d1 --- /dev/null +++ b/meta-extras/packages/python/python-urlgrabber/urlgrabber-3.0.0-cleanup.patch @@ -0,0 +1,28 @@ +diff -up urlgrabber-3.0.0/urlgrabber/grabber.py.cleanup urlgrabber-3.0.0/urlgrabber/grabber.py +--- urlgrabber-3.0.0/urlgrabber/grabber.py.cleanup 2007-11-29 10:25:13.000000000 +0000 ++++ urlgrabber-3.0.0/urlgrabber/grabber.py 2007-11-29 10:26:15.000000000 +0000 +@@ -1204,16 +1204,18 @@ class URLGrabberFileObject: + bs = 1024*8 + size = 0 + +- if amount is not None: bs = min(bs, amount - size) +- block = self.read(bs) +- size = size + len(block) +- while block: +- new_fo.write(block) ++ try: + if amount is not None: bs = min(bs, amount - size) + block = self.read(bs) + size = size + len(block) ++ while block: ++ new_fo.write(block) ++ if amount is not None: bs = min(bs, amount - size) ++ block = self.read(bs) ++ size = size + len(block) ++ finally: ++ new_fo.close() + +- new_fo.close() + try: + modified_tuple = self.hdr.getdate_tz('last-modified') + modified_stamp = rfc822.mktime_tz(modified_tuple) diff --git a/meta-extras/packages/python/python-urlgrabber/urlgrabber-HEAD.patch b/meta-extras/packages/python/python-urlgrabber/urlgrabber-HEAD.patch new file mode 100644 index 0000000000..90180d29a0 --- /dev/null +++ b/meta-extras/packages/python/python-urlgrabber/urlgrabber-HEAD.patch @@ -0,0 +1,142 @@ +diff --git a/urlgrabber/grabber.py b/urlgrabber/grabber.py +index e090e90..a26880c 100644 +--- a/urlgrabber/grabber.py ++++ b/urlgrabber/grabber.py +@@ -439,6 +439,12 @@ try: + except: + __version__ = '???' + ++try: ++ # this part isn't going to do much - need to talk to gettext ++ from i18n import _ ++except ImportError, msg: ++ def _(st): return st ++ + ######################################################################## + # functions for debugging output. These functions are here because they + # are also part of the module initialization. +@@ -1052,7 +1058,8 @@ class PyCurlFileObject(): + self._reget_length = 0 + self._prog_running = False + self._error = (None, None) +- self.size = None ++ self.size = 0 ++ self._hdr_ended = False + self._do_open() + + +@@ -1085,9 +1092,14 @@ class PyCurlFileObject(): + return -1 + + def _hdr_retrieve(self, buf): ++ if self._hdr_ended: ++ self._hdr_dump = '' ++ self.size = 0 ++ self._hdr_ended = False ++ + if self._over_max_size(cur=len(self._hdr_dump), + max_size=self.opts.max_header_size): +- return -1 ++ return -1 + try: + self._hdr_dump += buf + # we have to get the size before we do the progress obj start +@@ -1104,7 +1116,17 @@ class PyCurlFileObject(): + s = parse150(buf) + if s: + self.size = int(s) +- ++ ++ if buf.lower().find('location') != -1: ++ location = ':'.join(buf.split(':')[1:]) ++ location = location.strip() ++ self.scheme = urlparse.urlsplit(location)[0] ++ self.url = location ++ ++ if len(self._hdr_dump) != 0 and buf == '\r\n': ++ self._hdr_ended = True ++ if DEBUG: DEBUG.info('header ended:') ++ + return len(buf) + except KeyboardInterrupt: + return pycurl.READFUNC_ABORT +@@ -1136,6 +1158,7 @@ class PyCurlFileObject(): + self.curl_obj.setopt(pycurl.PROGRESSFUNCTION, self._progress_update) + self.curl_obj.setopt(pycurl.FAILONERROR, True) + self.curl_obj.setopt(pycurl.OPT_FILETIME, True) ++ self.curl_obj.setopt(pycurl.FOLLOWLOCATION, True) + + if DEBUG: + self.curl_obj.setopt(pycurl.VERBOSE, True) +@@ -1291,7 +1314,12 @@ class PyCurlFileObject(): + raise err + + elif str(e.args[1]) == '' and self.http_code != 0: # fake it until you make it +- msg = 'HTTP Error %s : %s ' % (self.http_code, self.url) ++ if self.scheme in ['http', 'https']: ++ msg = 'HTTP Error %s : %s ' % (self.http_code, self.url) ++ elif self.scheme in ['ftp']: ++ msg = 'FTP Error %s : %s ' % (self.http_code, self.url) ++ else: ++ msg = "Unknown Error: URL=%s , scheme=%s" % (self.url, self.scheme) + else: + msg = 'PYCURL ERROR %s - "%s"' % (errcode, str(e.args[1])) + code = errcode +@@ -1299,6 +1327,12 @@ class PyCurlFileObject(): + err.code = code + err.exception = e + raise err ++ else: ++ if self._error[1]: ++ msg = self._error[1] ++ err = URLGRabError(14, msg) ++ err.url = self.url ++ raise err + + def _do_open(self): + self.curl_obj = _curl_cache +@@ -1532,11 +1566,14 @@ class PyCurlFileObject(): + def _over_max_size(self, cur, max_size=None): + + if not max_size: +- max_size = self.size +- if self.opts.size: # if we set an opts size use that, no matter what +- max_size = self.opts.size ++ if not self.opts.size: ++ max_size = self.size ++ else: ++ max_size = self.opts.size ++ + if not max_size: return False # if we have None for all of the Max then this is dumb +- if cur > max_size + max_size*.10: ++ ++ if cur > int(float(max_size) * 1.10): + + msg = _("Downloaded more than max size for %s: %s > %s") \ + % (self.url, cur, max_size) +@@ -1582,7 +1619,11 @@ class PyCurlFileObject(): + self.opts.progress_obj.end(self._amount_read) + self.fo.close() + +- ++ def geturl(self): ++ """ Provide the geturl() method, used to be got from ++ urllib.addinfourl, via. urllib.URLopener.* """ ++ return self.url ++ + _curl_cache = pycurl.Curl() # make one and reuse it over and over and over + + +diff --git a/urlgrabber/progress.py b/urlgrabber/progress.py +index dd07c6a..45eb248 100644 +--- a/urlgrabber/progress.py ++++ b/urlgrabber/progress.py +@@ -658,6 +658,8 @@ def format_time(seconds, use_hours=0): + if seconds is None or seconds < 0: + if use_hours: return '--:--:--' + else: return '--:--' ++ elif seconds == float('inf'): ++ return 'Infinite' + else: + seconds = int(seconds) + minutes = seconds / 60 diff --git a/meta-extras/packages/python/python-urlgrabber/urlgrabber-reset.patch b/meta-extras/packages/python/python-urlgrabber/urlgrabber-reset.patch new file mode 100644 index 0000000000..b63e7c33ac --- /dev/null +++ b/meta-extras/packages/python/python-urlgrabber/urlgrabber-reset.patch @@ -0,0 +1,15 @@ +--- a/urlgrabber/grabber.py 2010-02-19 14:50:45.000000000 -0500 ++++ b/urlgrabber/grabber.py 2010-02-19 14:51:28.000000000 -0500 +@@ -1626,6 +1626,12 @@ + + _curl_cache = pycurl.Curl() # make one and reuse it over and over and over + ++def reset_curl_obj(): ++ """To make sure curl has reread the network/dns info we force a reload""" ++ global _curl_cache ++ _curl_cache.close() ++ _curl_cache = pycurl.Curl() ++ + + ##################################################################### + # DEPRECATED FUNCTIONS diff --git a/meta-extras/packages/python/python-urlgrabber_3.9.1.bb b/meta-extras/packages/python/python-urlgrabber_3.9.1.bb new file mode 100644 index 0000000000..9f3a4cc6a7 --- /dev/null +++ b/meta-extras/packages/python/python-urlgrabber_3.9.1.bb @@ -0,0 +1,16 @@ +DESCRIPTION = "urlgrabber is a pure python package that drastically simplifies the fetching of files." + +HOMEPAGE = "http://urlgrabber.baseurl.org/" +SECTION = "devel/python" +PRIORITY = "optional" +LICENSE = "GPL" +PR = "r1" + +SRC_URI = "http://urlgrabber.baseurl.org/download/urlgrabber-${PV}.tar.gz \ + file://urlgrabber-HEAD.patch;patch=1 \ + file://urlgrabber-reset.patch;patch=1" +S = "${WORKDIR}/urlgrabber-${PV}" + +DEPENDS = "python-pycurl" + +inherit distutils
\ No newline at end of file diff --git a/meta-extras/packages/python/yum-metadata-parser-native_1.1.4.bb b/meta-extras/packages/python/yum-metadata-parser-native_1.1.4.bb new file mode 100644 index 0000000000..0a44b99e2c --- /dev/null +++ b/meta-extras/packages/python/yum-metadata-parser-native_1.1.4.bb @@ -0,0 +1,7 @@ +require yum-metadata-parser_${PV}.bb +inherit native +DEPENDS = "python-native sqlite3-native glib-2.0-native libxml2-native" +RDEPENDS = "" +PR = "r0" + +#BUILD_CFLAGS += "-I${STAGING_LIBDIR}/glib-2.0" diff --git a/meta-extras/packages/python/yum-metadata-parser_1.1.4.bb b/meta-extras/packages/python/yum-metadata-parser_1.1.4.bb new file mode 100644 index 0000000000..2e404a2bb1 --- /dev/null +++ b/meta-extras/packages/python/yum-metadata-parser_1.1.4.bb @@ -0,0 +1,15 @@ +DESCRIPTION = "C-based metadata parser to quickly parse xml metadata into sqlite databases." +HOMEPAGE = "http://linux.duke.edu/projects/yum/download.ptml" +SECTION = "devel/python" +PRIORITY = "optional" +DEPENDS = "python sqlite3 glib-2.0 libxml2" +LICENSE = "GPL" + +PR = "r1" + +SRC_URI = "http://linux.duke.edu/projects/yum/download/yum-metadata-parser/yum-metadata-parser-${PV}.tar.gz" +S = "${WORKDIR}/yum-metadata-parser-${PV}" + +TARGET_CFLAGS += "-I${STAGING_LIBDIR}/glib-2.0" + +inherit distutils diff --git a/meta-extras/packages/spectrum-fw/spectrum-fw.bb b/meta-extras/packages/spectrum-fw/spectrum-fw.bb new file mode 100644 index 0000000000..45011d336c --- /dev/null +++ b/meta-extras/packages/spectrum-fw/spectrum-fw.bb @@ -0,0 +1,22 @@ +DESCRIPTION = "Firmware for Spectrum Wireless LAN cards" +DEPENDS += " unzip-native " +LICENSE = "closed" +PR = "r2" + +SRC_URI = "http://ftp.osuosl.org/pub/nslu2/sources/MC&DriverOnlyInstallers.zip \ + file://get_symbol_fw \ + file://parse_symbol_fw" +S = "${WORKDIR}" + +do_configure() { + ./get_symbol_fw +} + +do_install() { + install -d ${D}${base_libdir}/firmware/ + install -m 0755 ${WORKDIR}/symbol_sp24t_prim_fw ${D}${base_libdir}/firmware/symbol_sp24t_prim_fw + install -m 0755 ${WORKDIR}/symbol_sp24t_sec_fw ${D}${base_libdir}/firmware/symbol_sp24t_sec_fw +} + +PACKAGE_ARCH = "all" +FILES_${PN} += "${base_libdir}/firmware/symbol*" diff --git a/meta-extras/packages/spectrum-fw/spectrum-fw/get_symbol_fw b/meta-extras/packages/spectrum-fw/spectrum-fw/get_symbol_fw new file mode 100755 index 0000000000..80420b01a8 --- /dev/null +++ b/meta-extras/packages/spectrum-fw/spectrum-fw/get_symbol_fw @@ -0,0 +1,29 @@ +#!/bin/sh + +# Get firmware for Symbol Spectrum24 Trilogy. +# Both the header file and the binary firmware files are produced. + +# Copyright (C) 2004 Pavel Roskin <proski@gnu.org> + +# This script is Free Software, and it can be copied, distributed and +# modified as defined in the GNU General Public License. A copy of +# its license can be downloaded from http://www.gnu.org/copyleft/gpl.html + +# Usage: get_symbol_fw +# Output: spectrum_fw.h symbol_sp24t_prim_fw symbol_sp24t_sec_fw +# Needed tools: curl (or wget), unzip, perl. + +set -e + +DL_INT1='S24DRVR392B67-01.exe' +DL_INT2='Driver Only Installer/NetWLan5.sys' +DRIVER1=symbol1.drv +DRIVER2=symbol2.drv + +unzip -p $DL_INT1 "$DL_INT2" >$DRIVER2 + +perl parse_symbol_fw $DRIVER2 spectrum_fw.h symbol_sp24t_prim_fw \ + symbol_sp24t_sec_fw + +rm -f $DRIVER1 $DRIVER2 + diff --git a/meta-extras/packages/spectrum-fw/spectrum-fw/parse_symbol_fw b/meta-extras/packages/spectrum-fw/spectrum-fw/parse_symbol_fw new file mode 100755 index 0000000000..7fe0ea57c4 --- /dev/null +++ b/meta-extras/packages/spectrum-fw/spectrum-fw/parse_symbol_fw @@ -0,0 +1,129 @@ +#!/usr/bin/perl -w + +# Extract Symbol firmware and convert is to a header file and two binary +# files. + +# Copyright (C) 2004 Pavel Roskin <proski@gnu.org> + +# This script is Free Software, and it can be copied, distributed and +# modified as defined in the GNU General Public License. A copy of +# its license can be downloaded from http://www.gnu.org/copyleft/gpl.html + +# Usage: +# parse_symbol_fw infile header binfile1 binfile2 + +use strict; + +# Print message and exit (like "die", but without raising an exception). +# Newline is added at the end. +sub error +{ + printf STDERR "ERROR: "; + printf STDERR @_; + printf STDERR "\n"; + exit 1; +} + +sub readnum_ba () +{ + my $byte_a; + read INFILE,$byte_a,1; + my $byte_b; + read INFILE,$byte_b,1; + return (ord($byte_b) << 8) + ord($byte_a); +} + + +if ($#ARGV != 3) { + error ("Usage: parse_symbol_fw infile header binfile1 binfile2"); +} + +unless (open (INFILE, "< $ARGV[0]")) { + error ("couldn't open $ARGV[0] for reading: $!"); +} + +unless (open (OUTFILE, "> $ARGV[1]")) { + error ("couldn't open $ARGV[1] for writing: $!"); +} + +# Process one array, either for primary or for secondary firmware +sub process_one_array($$) { + my $arrname = shift(@_); + my $binfile = shift(@_); + my $offset = -1; + my $str_offset = 0; + + # Skip to the beginning of firmware + $/ = "\x00"; + while (<INFILE>) { + if (m{FILE: }g) { + $offset = $str_offset + pos() - 6; + last; + } + $str_offset = tell(INFILE); + } + + if ($offset == -1) { + error("Cannot find FILE: marker"); + } + + my @fwdata = split; + print $fwdata[1] . "\n"; + seek(INFILE, $offset, 0); + + my $blknum = $fwdata[3]; + my $pdrlen = $fwdata[4]; + my $crclen = $fwdata[5]; + my $compatlen = $fwdata[6]; + + while (!eof(INFILE)) { + my $byte; + read INFILE, $byte, 1; + last if (ord($byte) == 0x1a); + } + + # Walk all blocks + my $block = $blknum; + while ($block-- > 0) { + seek(INFILE, 4, 1); + my $len = readnum_ba(); + seek(INFILE, $len, 1); + } + + my $img_len = tell(INFILE) - $offset + $pdrlen + $crclen + $compatlen + 2; + seek(INFILE, $offset, 0); + + # Write binary file for the section + unless (open (BINFILE, "> $binfile")) { + error ("couldn't open $binfile for writing: $!"); + } + + # Output the array + printf OUTFILE "/* %s %s */\n", $fwdata[1], $fwdata[2]; + printf OUTFILE "static u8 %s[] = {\n", $arrname; + + my $count = 0; + while ($count++ < $img_len) { + my $byte; + read INFILE, $byte, 1; + $byte = ord($byte); + printf OUTFILE "0x%02x,", $byte; + printf BINFILE "%c", $byte; + if ($count % 16 == 0) { + printf OUTFILE "\n"; + } + } + + if ($img_len % 16) { + printf OUTFILE "\n"; + } + + print OUTFILE "};\n"; + close(BINFILE); +} + +process_one_array("primsym", $ARGV[2]); +process_one_array("secsym", $ARGV[3]); + +close(INFILE); +close(OUTFILE); |