diff options
Diffstat (limited to 'meta/recipes-core/busybox')
44 files changed, 1624 insertions, 913 deletions
diff --git a/meta/recipes-core/busybox/busybox-inittab_1.34.1.bb b/meta/recipes-core/busybox/busybox-inittab_1.34.1.bb new file mode 100644 index 0000000000..be8c06323c --- /dev/null +++ b/meta/recipes-core/busybox/busybox-inittab_1.34.1.bb @@ -0,0 +1,85 @@ +SUMMARY = "inittab configuration for BusyBox" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0-only;md5=801f80980d171dd6425610833a22dbe6" + +SRC_URI = "file://inittab" + +S = "${WORKDIR}" + +INHIBIT_DEFAULT_DEPS = "1" + +do_compile() { + : +} + +do_install() { + install -d ${D}${sysconfdir} + install -D -m 0644 ${WORKDIR}/inittab ${D}${sysconfdir}/inittab + tmp="${SERIAL_CONSOLES}" + [ -n "$tmp" ] && echo >> ${D}${sysconfdir}/inittab + for i in $tmp + do + j=`echo ${i} | sed s/\;/\ /g` + id=`echo ${i} | sed -e 's/^.*;//' -e 's/;.*//'` + echo "$id::respawn:${base_sbindir}/getty ${j}" >> ${D}${sysconfdir}/inittab + done + if [ "${USE_VT}" = "1" ]; then + cat <<EOF >>${D}${sysconfdir}/inittab +# ${base_sbindir}/getty invocations for the runlevels. +# +# The "id" field MUST be the same as the last +# characters of the device (after "tty"). +# +# Format: +# <id>:<runlevels>:<action>:<process> +# + +EOF + + for n in ${SYSVINIT_ENABLED_GETTYS} + do + echo "tty$n:12345:respawn:${base_sbindir}/getty 38400 tty$n" >> ${D}${sysconfdir}/inittab + done + echo "" >> ${D}${sysconfdir}/inittab + fi + +} + +pkg_postinst:${PN} () { +# run this on host and on target +if [ "${SERIAL_CONSOLES_CHECK}" = "" ]; then + exit 0 +fi +} + +pkg_postinst_ontarget:${PN} () { +# run this on the target +if [ -e /proc/consoles ]; then + tmp="${SERIAL_CONSOLES_CHECK}" + for i in $tmp + do + j=`echo ${i} | sed -e s/^.*\;//g -e s/\:.*//g` + k=`echo ${i} | sed s/^.*\://g` + if [ -z "`grep ${j} /proc/consoles`" ]; then + if [ -z "${k}" ] || [ -z "`grep ${k} /proc/consoles`" ] || [ ! -e /dev/${j} ]; then + sed -i -e /^.*${j}\ /d -e /^.*${j}$/d /etc/inittab + fi + fi + done + kill -HUP 1 +else + exit 1 +fi +} + +# SERIAL_CONSOLES is generally defined by the MACHINE .conf. +# Set PACKAGE_ARCH appropriately. +PACKAGE_ARCH = "${MACHINE_ARCH}" + +FILES:${PN} = "${sysconfdir}/inittab" +CONFFILES:${PN} = "${sysconfdir}/inittab" + +RCONFLICTS:${PN} = "sysvinit-inittab" + +USE_VT ?= "1" +SYSVINIT_ENABLED_GETTYS ?= "1" diff --git a/meta/recipes-core/busybox/busybox.inc b/meta/recipes-core/busybox/busybox.inc index ed8f9fe766..622325aabb 100644 --- a/meta/recipes-core/busybox/busybox.inc +++ b/meta/recipes-core/busybox/busybox.inc @@ -1,14 +1,15 @@ SUMMARY = "Tiny versions of many common UNIX utilities in a single small executable" DESCRIPTION = "BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for most of the utilities you usually find in GNU fileutils, shellutils, etc. The utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options that are included provide the expected functionality and behave very much like their GNU counterparts. BusyBox provides a fairly complete POSIX environment for any small or embedded system." -HOMEPAGE = "http://www.busybox.net" +HOMEPAGE = "https://www.busybox.net" BUGTRACKER = "https://bugs.busybox.net/" -DEPENDS += "kern-tools-native" +DEPENDS += "kern-tools-native virtual/crypt" -# bzip2 applet in busybox is based on lightly-modified bzip2 source +# bzip2 applet in busybox is based on lightly-modified bzip2-1.0.4 source # the GPL is version 2 only -LICENSE = "GPLv2 & bzip2" -LIC_FILES_CHKSUM = "file://LICENSE;md5=de10de48642ab74318e893a61105afbb" +LICENSE = "GPLv2 & bzip2-1.0.4" +LIC_FILES_CHKSUM = "file://LICENSE;md5=de10de48642ab74318e893a61105afbb \ + file://archival/libarchive/bz/LICENSE;md5=28e3301eae987e8cfe19988e98383dae" SECTION = "base" @@ -17,70 +18,77 @@ BUSYBOX_SPLIT_SUID ?= "1" export EXTRA_CFLAGS = "${CFLAGS}" export EXTRA_LDFLAGS = "${LDFLAGS}" -export EXTRA_OEMAKE += "'LD=${CCLD}'" + +EXTRA_OEMAKE = "CC='${CC}' LD='${CCLD}' V=1 ARCH=${TARGET_ARCH} CROSS_COMPILE=${TARGET_PREFIX} SKIP_STRIP=y HOSTCC='${BUILD_CC}' HOSTCPP='${BUILD_CPP}'" PACKAGES =+ "${PN}-httpd ${PN}-udhcpd ${PN}-udhcpc ${PN}-syslog ${PN}-mdev ${PN}-hwclock" -FILES_${PN}-httpd = "${sysconfdir}/init.d/busybox-httpd /srv/www" -FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog* ${sysconfdir}/syslog-startup.conf* ${sysconfdir}/syslog.conf* ${systemd_unitdir}/system/syslog.service ${sysconfdir}/default/busybox-syslog" -FILES_${PN}-mdev = "${sysconfdir}/init.d/mdev ${sysconfdir}/mdev.conf ${sysconfdir}/mdev/*" -FILES_${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd" -FILES_${PN}-udhcpc = "${sysconfdir}/udhcpc.d ${datadir}/udhcpc" -FILES_${PN}-hwclock = "${sysconfdir}/init.d/hwclock.sh" +FILES:${PN}-httpd = "${sysconfdir}/init.d/busybox-httpd /srv/www" +FILES:${PN}-syslog = "${sysconfdir}/init.d/syslog* ${sysconfdir}/syslog-startup.conf* ${sysconfdir}/syslog.conf* ${systemd_system_unitdir}/syslog.service ${sysconfdir}/default/busybox-syslog" +FILES:${PN}-mdev = "${sysconfdir}/init.d/mdev ${sysconfdir}/mdev.conf ${sysconfdir}/mdev/*" +FILES:${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd" +FILES:${PN}-udhcpc = "${sysconfdir}/udhcpc.d ${datadir}/udhcpc" +FILES:${PN}-hwclock = "${sysconfdir}/init.d/hwclock.sh" INITSCRIPT_PACKAGES = "${PN}-httpd ${PN}-syslog ${PN}-udhcpd ${PN}-mdev ${PN}-hwclock" -INITSCRIPT_NAME_${PN}-httpd = "busybox-httpd" -INITSCRIPT_NAME_${PN}-hwclock = "hwclock.sh" -INITSCRIPT_NAME_${PN}-mdev = "mdev" -INITSCRIPT_PARAMS_${PN}-mdev = "start 03 S ." -INITSCRIPT_NAME_${PN}-syslog = "syslog" -INITSCRIPT_NAME_${PN}-udhcpd = "busybox-udhcpd" +INITSCRIPT_NAME:${PN}-httpd = "busybox-httpd" +INITSCRIPT_NAME:${PN}-hwclock = "hwclock.sh" +INITSCRIPT_NAME:${PN}-mdev = "mdev" +INITSCRIPT_PARAMS:${PN}-mdev = "start 04 S ." +INITSCRIPT_NAME:${PN}-syslog = "syslog" +INITSCRIPT_NAME:${PN}-udhcpd = "busybox-udhcpd" SYSTEMD_PACKAGES = "${PN}-syslog" -SYSTEMD_SERVICE_${PN}-syslog = "busybox-syslog.service" +SYSTEMD_SERVICE:${PN}-syslog = "${@bb.utils.contains('SRC_URI', 'file://syslog.cfg', 'busybox-syslog.service', '', d)}" + +RDEPENDS:${PN}-syslog = "busybox" +CONFFILES:${PN}-syslog = "${sysconfdir}/syslog-startup.conf" +RCONFLICTS:${PN}-syslog = "rsyslog sysklogd syslog-ng" + +CONFFILES:${PN}-mdev = "${sysconfdir}/mdev.conf" -CONFFILES_${PN}-syslog = "${sysconfdir}/syslog-startup.conf.${BPN}" -CONFFILES_${PN}-mdev = "${sysconfdir}/mdev.conf" +RRECOMMENDS:${PN} = "${PN}-udhcpc" -RRECOMMENDS_${PN} = "${PN}-syslog ${PN}-udhcpc" +RDEPENDS:${PN} = "${@["", "busybox-inittab"][(d.getVar('VIRTUAL-RUNTIME_init_manager') == 'busybox')]}" inherit cml1 systemd update-rc.d ptest +# busybox's unzip test case needs zip command, which busybox itself does not provide +RDEPENDS:${PN}-ptest = "zip" + # internal helper def busybox_cfg(feature, tokens, cnf, rem): - if type(tokens) == type(""): - tokens = [tokens] - rem.extend(['/^[# ]*' + token + '[ =]/d' for token in tokens]) - if feature: - cnf.extend([token + '=y' for token in tokens]) - else: - cnf.extend(['# ' + token + ' is not set' for token in tokens]) + if type(tokens) == type(""): + tokens = [tokens] + rem.extend(['/^[# ]*' + token + '[ =]/d' for token in tokens]) + if feature: + cnf.extend([token + '=y' for token in tokens]) + else: + cnf.extend(['# ' + token + ' is not set' for token in tokens]) # Map distro features to config settings def features_to_busybox_settings(d): - cnf, rem = ([], []) - busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'ipv6', True, False, d), 'CONFIG_FEATURE_IPV6', cnf, rem) - busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'largefile', True, False, d), 'CONFIG_LFS', cnf, rem) - busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'largefile', True, False, d), 'CONFIG_FDISK_SUPPORT_LARGE_DISKS', cnf, rem) - busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'nls', True, False, d), 'CONFIG_LOCALE_SUPPORT', cnf, rem) - busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'ipv4', True, False, d), 'CONFIG_FEATURE_IFUPDOWN_IPV4', cnf, rem) - busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'ipv6', True, False, d), 'CONFIG_FEATURE_IFUPDOWN_IPV6', cnf, rem) - busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'wifi', True, False, d), 'CONFIG_RFKILL', cnf, rem) - busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'bluetooth', True, False, d), 'CONFIG_RFKILL', cnf, rem) - return "\n".join(cnf), "\n".join(rem) - -# X, Y = ${@features_to_uclibc_settings(d)} + cnf, rem = ([], []) + busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'ipv6', True, False, d), 'CONFIG_FEATURE_IPV6', cnf, rem) + busybox_cfg(True, 'CONFIG_LFS', cnf, rem) + busybox_cfg(True, 'CONFIG_FDISK_SUPPORT_LARGE_DISKS', cnf, rem) + busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'nls', True, False, d), 'CONFIG_LOCALE_SUPPORT', cnf, rem) + busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'ipv4', True, False, d), 'CONFIG_FEATURE_IFUPDOWN_IPV4', cnf, rem) + busybox_cfg(bb.utils.contains('DISTRO_FEATURES', 'ipv6', True, False, d), 'CONFIG_FEATURE_IFUPDOWN_IPV6', cnf, rem) + busybox_cfg(bb.utils.contains_any('DISTRO_FEATURES', 'bluetooth wifi', True, False, d), 'CONFIG_RFKILL', cnf, rem) + return "\n".join(cnf), "\n".join(rem) + +# X, Y = ${@features_to_busybox_settings(d)} # unfortunately doesn't seem to work with bitbake, workaround: def features_to_busybox_conf(d): - cnf, rem = features_to_busybox_settings(d) - return cnf + cnf, rem = features_to_busybox_settings(d) + return cnf def features_to_busybox_del(d): - cnf, rem = features_to_busybox_settings(d) - return rem + cnf, rem = features_to_busybox_settings(d) + return rem -configmangle = '/CROSS_COMPILER_PREFIX/d; \ - /CONFIG_EXTRA_CFLAGS/d; \ +configmangle = '/CONFIG_EXTRA_CFLAGS/d; \ ' OE_FEATURES := "${@features_to_busybox_conf(d)}" OE_DEL := "${@features_to_busybox_del(d)}" @@ -89,50 +97,44 @@ DO_IPv6 := "${@bb.utils.contains('DISTRO_FEATURES', 'ipv6', 1, 0, d)}" python () { if "${OE_DEL}": - d.setVar('configmangle_append', "${OE_DEL}" + "\n") + d.setVar('configmangle:append', "${OE_DEL}" + "\n") if "${OE_FEATURES}": - d.setVar('configmangle_append', + d.setVar('configmangle:append', "/^### DISTRO FEATURES$/a\\\n%s\n\n" % ("\\n".join((d.expand("${OE_FEATURES}").split("\n"))))) - d.setVar('configmangle_append', + d.setVar('configmangle:append', "/^### CROSS$/a\\\n%s\n" % - ("\\n".join(["CONFIG_CROSS_COMPILER_PREFIX=\"${TARGET_PREFIX}\"", - "CONFIG_EXTRA_CFLAGS=\"${CFLAGS}\" \"${HOST_CC_ARCH}\"" + ("\\n".join(["CONFIG_EXTRA_CFLAGS=\"${CFLAGS} ${HOST_CC_ARCH}\"" ]) )) } do_prepare_config () { - sed -e 's#@DATADIR@#${datadir}#g' \ + export KCONFIG_NOTIMESTAMP=1 + + sed -e '/CONFIG_STATIC/d' \ < ${WORKDIR}/defconfig > ${S}/.config - sed -i -e '/CONFIG_STATIC/d' .config echo "# CONFIG_STATIC is not set" >> .config for i in 'CROSS' 'DISTRO FEATURES'; do echo "### $i"; done >> \ ${S}/.config sed -i -e '${configmangle}' ${S}/.config if test ${DO_IPv4} -eq 0 && test ${DO_IPv6} -eq 0; then - # disable networking applets - mv ${S}/.config ${S}/.config.oe-tmp - awk 'BEGIN{net=0} - /^# Networking Utilities/{net=1} - /^#$/{if(net){net=net+1}} - {if(net==2&&$0 !~ /^#/&&$1){print("# "$1" is not set")}else{print}}' \ - ${S}/.config.oe-tmp > ${S}/.config + # disable networking applets + mv ${S}/.config ${S}/.config.oe-tmp + awk 'BEGIN{net=0} + /^# Networking Utilities/{net=1} + /^#$/{if(net){net=net+1}} + {if(net==2&&$0 !~ /^#/&&$1){print("# "$1" is not set")}else{print}}' \ + ${S}/.config.oe-tmp > ${S}/.config fi sed -i 's/CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n"/CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -b"/' ${S}/.config + if [ -n "${DEBUG_PREFIX_MAP}" ]; then + sed -i 's|${DEBUG_PREFIX_MAP}||g' ${S}/.config + fi } -# returns all the elements from the src uri that are .cfg files -def find_cfgs(d): - sources=src_patches(d, True) - sources_list=[] - for s in sources: - if s.endswith('.cfg'): - sources_list.append(s) - - return sources_list - do_configure () { + set -x do_prepare_config merge_config.sh -m .config ${@" ".join(find_cfgs(d))} cml1_do_configure @@ -140,11 +142,23 @@ do_configure () { do_compile() { unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS + export KCONFIG_NOTIMESTAMP=1 + if [ "${BUSYBOX_SPLIT_SUID}" = "1" -a x`grep "CONFIG_FEATURE_INDIVIDUAL=y" .config` = x ]; then - # split the .config into two parts, and make two busybox binaries + # split the .config into two parts, and make two busybox binaries + if [ -e .config.orig ]; then + # Need to guard again an interrupted do_compile - restore any backup + cp .config.orig .config + fi cp .config .config.orig oe_runmake busybox.cfg.suid oe_runmake busybox.cfg.nosuid + + # workaround for suid bug 10346 + if ! grep -q "CONFIG_SH_IS_NONE" busybox.cfg.nosuid; then + echo "CONFIG_SH_IS_NONE" >> busybox.cfg.suid + fi + for i in `cat busybox.cfg.suid busybox.cfg.nosuid`; do echo "# $i is not set" >> .config.disable.apps done @@ -154,12 +168,25 @@ do_compile() { cat busybox.cfg.$s | while read item; do grep -w "$item" .config.orig done > .config.app.$s + + # workaround for suid bug 10346 + if [ "$s" = "suid" ] ; then + sed "s/.*CONFIG_SH_IS_NONE.*$/CONFIG_SH_IS_NONE=y/" -i .config.app.suid + fi + merge_config.sh -m .config.nonapps .config.app.$s oe_runmake busybox_unstripped mv busybox_unstripped busybox.$s oe_runmake busybox.links - mv busybox.links busybox.links.$s + sort busybox.links > busybox.links.$s + rm busybox.links done + + # hard fail if sh is being linked to the suid busybox (detects bug 10346) + if grep -q -x "/bin/sh" busybox.links.suid; then + bbfatal "busybox suid binary incorrectly provides /bin/sh" + fi + # copy .config.orig back to .config, because the install process may check this file cp .config.orig .config # cleanup @@ -172,20 +199,24 @@ do_compile() { } do_install () { - if [ "${prefix}" != "/usr" ]; then - sed -i "s:^/usr/:${prefix}/:" busybox.links* - fi - if [ "${base_sbindir}" != "/sbin" ]; then - sed -i "s:^/sbin/:${base_sbindir}/:" busybox.links* - fi - if [ "${base_bindir}" != "/bin" ]; then - sed -i "s:^/bin/:${base_bindir}/:" busybox.links* - fi + sed -i "s:^/bin/:BASE_BINDIR/:" busybox.links* + sed -i "s:^/sbin/:BASE_SBINDIR/:" busybox.links* + sed -i "s:^/usr/bin/:BINDIR/:" busybox.links* + sed -i "s:^/usr/sbin/:SBINDIR/:" busybox.links* + + # Move arch/link to BINDIR to match coreutils + sed -i "s:^BASE_BINDIR/arch:BINDIR/arch:" busybox.links* + sed -i "s:^BASE_BINDIR/link:BINDIR/link:" busybox.links* + + sed -i "s:^BASE_BINDIR/:${base_bindir}/:" busybox.links* + sed -i "s:^BASE_SBINDIR/:${base_sbindir}/:" busybox.links* + sed -i "s:^BINDIR/:${bindir}/:" busybox.links* + sed -i "s:^SBINDIR/:${sbindir}/:" busybox.links* install -d ${D}${sysconfdir}/init.d if ! grep -q "CONFIG_FEATURE_INDIVIDUAL=y" ${B}/.config; then - # Install /bin/busybox, and the /bin/sh link so the postinst script + # Install ${base_bindir}/busybox, and the ${base_bindir}/sh link so the postinst script # can run. Let update-alternatives handle the rest. install -d ${D}${base_bindir} if [ "${BUSYBOX_SPLIT_SUID}" = "1" ]; then @@ -193,7 +224,7 @@ do_install () { install -m 0755 ${B}/busybox.nosuid ${D}${base_bindir} install -m 0644 ${S}/busybox.links.suid ${D}${sysconfdir} install -m 0644 ${S}/busybox.links.nosuid ${D}${sysconfdir} - if grep -q "CONFIG_FEATURE_SH_IS_ASH=y" ${B}/.config; then + if grep -q "CONFIG_SH_IS_ASH=y" ${B}/.config; then ln -sf busybox.nosuid ${D}${base_bindir}/sh fi # Keep a default busybox for people who want to invoke busybox directly. @@ -207,19 +238,18 @@ do_install () { install -m 0755 ${B}/busybox ${D}${base_bindir} fi install -m 0644 ${S}/busybox.links ${D}${sysconfdir} - if grep -q "CONFIG_FEATURE_SH_IS_ASH=y" ${B}/.config; then + if grep -q "CONFIG_SH_IS_ASH=y" ${B}/.config; then ln -sf busybox ${D}${base_bindir}/sh fi # We make this symlink here to eliminate the error when upgrading together # with busybox-syslog. Without this symlink, the opkg may think of the # busybox.nosuid as obsolete and remove it, resulting in dead links like - # /bin/sed -> /bin/busybox.nosuid. This will make upgrading busybox-syslog fail. + # ${base_bindir}/sed -> ${base_bindir}/busybox.nosuid. This will make upgrading busybox-syslog fail. # This symlink will be safely deleted in postinst, thus no negative effect. ln -sf busybox ${D}${base_bindir}/busybox.nosuid fi else - install -d ${D}${base_bindir} ${D}${base_sbindir} - install -d ${D}${libdir} ${D}${bindir} ${D}${sbindir} + install -d ${D}${base_bindir} ${D}${bindir} ${D}${libdir} cat busybox.links | while read FILE; do NAME=`basename "$FILE"` install -m 0755 "0_lib/$NAME" "${D}$FILE.${BPN}" @@ -239,93 +269,100 @@ do_install () { fi if grep -q "CONFIG_SYSLOGD=y" ${B}/.config; then - install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${BPN} - install -m 644 ${WORKDIR}/syslog-startup.conf ${D}${sysconfdir}/syslog-startup.conf.${BPN} - install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${BPN} + install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog + install -m 644 ${WORKDIR}/syslog-startup.conf ${D}${sysconfdir}/syslog-startup.conf + install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf fi - if grep "CONFIG_CROND=y" ${B}/.config; then + if grep -q "CONFIG_CROND=y" ${B}/.config; then install -m 0755 ${WORKDIR}/busybox-cron ${D}${sysconfdir}/init.d/ fi - if grep "CONFIG_HTTPD=y" ${B}/.config; then + if grep -q "CONFIG_HTTPD=y" ${B}/.config; then install -m 0755 ${WORKDIR}/busybox-httpd ${D}${sysconfdir}/init.d/ install -d ${D}/srv/www fi - if grep "CONFIG_UDHCPD=y" ${B}/.config; then + if grep -q "CONFIG_UDHCPD=y" ${B}/.config; then install -m 0755 ${WORKDIR}/busybox-udhcpd ${D}${sysconfdir}/init.d/ fi - if grep "CONFIG_HWCLOCK=y" ${B}/.config; then + if grep -q "CONFIG_HWCLOCK=y" ${B}/.config; then install -m 0755 ${WORKDIR}/hwclock.sh ${D}${sysconfdir}/init.d/ fi - if grep "CONFIG_UDHCPC=y" ${B}/.config; then + if grep -q "CONFIG_UDHCPC=y" ${B}/.config; then install -d ${D}${sysconfdir}/udhcpc.d install -d ${D}${datadir}/udhcpc - install -m 0755 ${WORKDIR}/simple.script ${D}${sysconfdir}/udhcpc.d/50default + install -m 0755 ${WORKDIR}/simple.script ${D}${sysconfdir}/udhcpc.d/50default + sed -i "s:/SBIN_DIR/:${base_sbindir}/:" ${D}${sysconfdir}/udhcpc.d/50default install -m 0755 ${WORKDIR}/default.script ${D}${datadir}/udhcpc/default.script fi - if grep "CONFIG_INETD=y" ${B}/.config; then + if grep -q "CONFIG_INETD=y" ${B}/.config; then install -m 0755 ${WORKDIR}/inetd ${D}${sysconfdir}/init.d/inetd.${BPN} sed -i "s:/usr/sbin/:${sbindir}/:" ${D}${sysconfdir}/init.d/inetd.${BPN} install -m 0644 ${WORKDIR}/inetd.conf ${D}${sysconfdir}/ fi - if grep "CONFIG_MDEV=y" ${B}/.config; then - install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev - if grep "CONFIG_FEATURE_MDEV_CONF=y" ${B}/.config; then - install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf - install -d ${D}${sysconfdir}/mdev - install -m 0755 ${WORKDIR}/find-touchscreen.sh ${D}${sysconfdir}/mdev - install -m 0755 ${WORKDIR}/mdev-mount.sh ${D}${sysconfdir}/mdev - fi + if grep -q "CONFIG_MDEV=y" ${B}/.config; then + install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev + if grep "CONFIG_FEATURE_MDEV_CONF=y" ${B}/.config; then + install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf + install -d ${D}${sysconfdir}/mdev + install -m 0755 ${WORKDIR}/find-touchscreen.sh ${D}${sysconfdir}/mdev + install -m 0755 ${WORKDIR}/mdev-mount.sh ${D}${sysconfdir}/mdev + fi + fi + if grep -q "CONFIG_INIT=y" ${B}/.config && ${@bb.utils.contains('VIRTUAL-RUNTIME_init_manager','busybox','true','false',d)}; then + install -D -m 0755 ${WORKDIR}/rcS ${D}${sysconfdir}/init.d/rcS + install -D -m 0755 ${WORKDIR}/rcK ${D}${sysconfdir}/init.d/rcK + install -D -m 0755 ${WORKDIR}/rcS.default ${D}${sysconfdir}/default/rcS fi - if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then - if grep -q "CONFIG_SYSLOGD=y" ${B}/.config; then - install -d ${D}${systemd_unitdir}/system - sed 's,@base_sbindir@,${base_sbindir},g' < ${WORKDIR}/busybox-syslog.service.in \ - > ${D}${systemd_unitdir}/system/busybox-syslog.service - if [ -f ${WORKDIR}/busybox-syslog.default ] ; then - install -d ${D}${sysconfdir}/default - install -m 0644 ${WORKDIR}/busybox-syslog.default ${D}${sysconfdir}/default/busybox-syslog - fi - ln -sf /dev/null ${D}${systemd_unitdir}/system/syslog.service - fi - if grep -q "CONFIG_KLOGD=y" ${B}/.config; then - install -d ${D}${systemd_unitdir}/system - sed 's,@base_sbindir@,${base_sbindir},g' < ${WORKDIR}/busybox-klogd.service.in \ - > ${D}${systemd_unitdir}/system/busybox-klogd.service - fi - fi + if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then + if grep -q "CONFIG_KLOGD=y" ${B}/.config; then + install -d ${D}${systemd_system_unitdir} + sed 's,@base_sbindir@,${base_sbindir},g' < ${WORKDIR}/busybox-klogd.service.in \ + > ${D}${systemd_system_unitdir}/busybox-klogd.service + fi - # Remove the sysvinit specific configuration file for systemd systems to avoid confusion - if ${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', 'false', 'true', d)}; then - rm -f ${D}${sysconfdir}/syslog-startup.conf.${BPN} - fi + if grep -q "CONFIG_SYSLOGD=y" ${B}/.config; then + install -d ${D}${systemd_system_unitdir} + sed 's,@base_sbindir@,${base_sbindir},g' < ${WORKDIR}/busybox-syslog.service.in \ + > ${D}${systemd_system_unitdir}/busybox-syslog.service + if [ ! -e ${D}${systemd_system_unitdir}/busybox-klogd.service ] ; then + sed -i '/klog/d' ${D}${systemd_system_unitdir}/busybox-syslog.service + fi + if [ -f ${WORKDIR}/busybox-syslog.default ] ; then + install -d ${D}${sysconfdir}/default + install -m 0644 ${WORKDIR}/busybox-syslog.default ${D}${sysconfdir}/default/busybox-syslog + fi + fi + fi + + # Remove the sysvinit specific configuration file for systemd systems to avoid confusion + if ${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', 'false', 'true', d)}; then + rm -f ${D}${sysconfdir}/syslog-startup.conf + fi } -inherit update-alternatives +PTEST_BINDIR = "1" -ALTERNATIVE_PRIORITY = "50" +do_install_ptest () { + cp -r ${B}/testsuite ${D}${PTEST_PATH}/ + # These access the internet which is not guaranteed to work on machines running the tests + rm -rf ${D}${PTEST_PATH}/testsuite/wget + sort ${B}/.config > ${D}${PTEST_PATH}/.config + ln -s /bin/busybox ${D}${PTEST_PATH}/busybox +} -ALTERNATIVE_${PN}-syslog += "syslog-conf" -ALTERNATIVE_LINK_NAME[syslog-conf] = "${sysconfdir}/syslog.conf" +inherit update-alternatives -python () { - if bb.utils.contains('DISTRO_FEATURES', 'sysvinit', True, False, d): - pn = d.getVar('PN', True) - d.appendVar('ALTERNATIVE_%s-syslog' % (pn), ' syslog-init') - d.setVarFlag('ALTERNATIVE_LINK_NAME', 'syslog-init', '%s/init.d/syslog' % (d.getVar('sysconfdir', True))) - d.setVarFlag('ALTERNATIVE_TARGET', 'syslog-init', '%s/init.d/syslog.%s' % (d.getVar('sysconfdir', True), d.getVar('BPN', True))) - d.appendVar('ALTERNATIVE_%s-syslog' % (pn), ' syslog-startup-conf') - d.setVarFlag('ALTERNATIVE_LINK_NAME', 'syslog-startup-conf', '%s/syslog-startup.conf' % (d.getVar('sysconfdir', True))) - d.setVarFlag('ALTERNATIVE_TARGET', 'syslog-startup-conf', '%s/syslog-startup.conf.%s' % (d.getVar('sysconfdir', True), d.getVar('BPN', True))) -} +ALTERNATIVE_PRIORITY = "50" -python do_package_prepend () { +python do_package:prepend () { # We need to load the full set of busybox provides from the /etc/busybox.links # Use this to see the update-alternatives with the right information - dvar = d.getVar('D', True) - pn = d.getVar('PN', True) + dvar = d.getVar('D') + pn = d.getVar('PN') def set_alternative_vars(links, target): + links = d.expand(links) + target = d.expand(target) f = open('%s%s' % (dvar, links), 'r') for alt_link_name in f: alt_link_name = alt_link_name.strip() @@ -333,7 +370,10 @@ python do_package_prepend () { # Match coreutils if alt_name == '[': alt_name = 'lbracket' - d.appendVar('ALTERNATIVE_%s' % (pn), ' ' + alt_name) + if alt_name == 'klogd' or alt_name == 'syslogd': + d.appendVar('ALTERNATIVE:%s-syslog' % (pn), ' ' + alt_name) + else: + d.appendVar('ALTERNATIVE:%s' % (pn), ' ' + alt_name) d.setVarFlag('ALTERNATIVE_LINK_NAME', alt_name, alt_link_name) if os.path.exists('%s%s' % (dvar, target)): d.setVarFlag('ALTERNATIVE_TARGET', alt_name, target) @@ -347,45 +387,69 @@ python do_package_prepend () { set_alternative_vars("${sysconfdir}/busybox.links.suid", "${base_bindir}/busybox.suid") } -pkg_postinst_${PN} () { - # This part of code is dedicated to the on target upgrade problem. - # It's known that if we don't make appropriate symlinks before update-alternatives calls, - # there will be errors indicating missing commands such as 'sed'. - # These symlinks will later be updated by update-alternatives calls. - test -n 2 > /dev/null || alias test='busybox test' - if test "x$D" = "x"; then - # Remove busybox.nosuid if it's a symlink, because this situation indicates - # that we're installing or upgrading to a one-binary busybox. - if test -h ${base_bindir}/busybox.nosuid; then - rm -f ${base_bindir}/busybox.nosuid - fi - for suffix in "" ".nosuid" ".suid"; do - if test -e ${sysconfdir}/busybox.links$suffix; then - while read link; do - if test ! -e "$link"; then - case "$link" in - /*/*/*) - to="../..${base_bindir}/busybox$suffix" - ;; - /bin/*) - to="busybox$suffix" - ;; - /*/*) - to="..${base_bindir}/busybox$suffix" - ;; - esac - # we can use busybox here because even if we are using splitted busybox - # we've made a symlink from /bin/busybox to /bin/busybox.nosuid. - busybox rm -f $link - busybox ln -s $to $link - fi - done < ${sysconfdir}/busybox.links$suffix - fi - done - fi +# This part of code is dedicated to the on target upgrade problem. It's known +# that if we don't make appropriate symlinks before update-alternatives calls, +# there will be errors indicating missing commands such as 'sed'. +# These symlinks will later be updated by update-alternatives calls. +# The update-alternatives.bbclass' postinst script runs firstly before other +# postinst, but this part of code needs run firstly, so add this funtion. +python populate_packages_updatealternatives:append() { + postinst = """ +test -n 2 > /dev/null || alias test='busybox test' +if test "x$D" = "x"; then + # Remove busybox.nosuid if it's a symlink, because this situation indicates + # that we're installing or upgrading to a one-binary busybox. + if test -h ${base_bindir}/busybox.nosuid; then + rm -f ${base_bindir}/busybox.nosuid + fi + for suffix in "" ".nosuid" ".suid"; do + if test -e ${sysconfdir}/busybox.links$suffix; then + while read link; do + if test ! -e "$link"; then + # we can use busybox here because even if we are using splitted busybox + # we've made a symlink from /bin/busybox to /bin/busybox.nosuid. + busybox rm -f $link + busybox ln -s "${base_bindir}/busybox$suffix" $link + fi + done < ${sysconfdir}/busybox.links$suffix + fi + done +fi +if grep -q "^${base_bindir}/bash$" $D${sysconfdir}/busybox.links*; then + grep -q "^${base_bindir}/bash$" $D${sysconfdir}/shells || echo ${base_bindir}/bash >> $D${sysconfdir}/shells +fi + +""" + d.prependVar('pkg_postinst:%s' % pkg, postinst) } -pkg_prerm_${PN} () { +pkg_postinst:${PN}:prepend () { + # Need path to saved utils, but they may have be removed on upgrade of busybox + # Only use shell to get paths. Also capture if busybox was saved. + BUSYBOX="" + if [ "x$D" = "x" ] ; then + for busybox_rmdir in /tmp/busyboxrm-*; do + if [ "$busybox_rmdir" != '/tmp/busyboxrm-*' ] ; then + export PATH=$busybox_rmdir:$PATH + if [ -e $busybox_rmdir/busybox* ] ; then + BUSYBOX="$busybox_rmdir/busybox*" + fi + fi + done + fi +} + +pkg_postinst:${PN}:append () { + # If busybox exists in the remove directory it is because it was the only shell left. + if [ "x$D" = "x" ] ; then + if [ "x$BUSYBOX" != "x" ] ; then + update-alternatives --remove sh $BUSYBOX + rm -f $BUSYBOX + fi + fi +} + +pkg_prerm:${PN} () { # This is so you can make busybox commit suicide - removing busybox with no other packages # providing its files, this will make update-alternatives work, but the update-rc.d part # for syslog, httpd and/or udhcpd will fail if there is no other package providing sh @@ -403,14 +467,40 @@ pkg_prerm_${PN} () { ln -s ${base_bindir}/busybox $tmpdir/sed ln -s ${base_bindir}/busybox $tmpdir/sort ln -s ${base_bindir}/busybox $tmpdir/grep + ln -s ${base_bindir}/busybox $tmpdir/tail export PATH=$PATH:$tmpdir + + # If busybox is the shell, we need to save it since its the lowest priority shell + # Register saved bitbake as the lowest priority shell possible as back up. + if [ -n "$(readlink -f /bin/sh | grep busybox)" ] ; then + BUSYBOX=$(readlink -f /bin/sh) + cp $BUSYBOX $tmpdir/$(basename $BUSYBOX) + update-alternatives --install /bin/sh sh $tmpdir/$(basename $BUSYBOX) 1 + fi +} + +pkg_postrm:${PN} () { + # Add path to remove dir in case we removed our only grep + if [ "x$D" = "x" ] ; then + for busybox_rmdir in /tmp/busyboxrm-*; do + if [ "$busybox_rmdir" != '/tmp/busyboxrm-*' ] ; then + export PATH=$busybox_rmdir:$PATH + fi + done + fi + + if grep -q "^${base_bindir}/bash$" $D${sysconfdir}/busybox.links* && [ ! -e $D${base_bindir}/bash ]; then + printf "$(grep -v "^${base_bindir}/bash$" $D${sysconfdir}/shells)\n" > $D${sysconfdir}/shells + fi } -pkg_prerm_${PN}-syslog () { +pkg_prerm:${PN}-syslog () { # remove syslog if test "x$D" = "x"; then if test "$1" = "upgrade" -o "$1" = "remove"; then - ${sysconfdir}/init.d/syslog stop + ${sysconfdir}/init.d/syslog stop || : fi fi } + +RPROVIDES:${PN} += "${@bb.utils.contains('DISTRO_FEATURES', 'usrmerge', '/bin/sh /bin/ash', '', d)}" diff --git a/meta/recipes-core/busybox/busybox/0001-Use-CC-when-linking-instead-of-LD-and-use-CFLAGS-and.patch b/meta/recipes-core/busybox/busybox/0001-Use-CC-when-linking-instead-of-LD-and-use-CFLAGS-and.patch new file mode 100644 index 0000000000..2bf2b91c7e --- /dev/null +++ b/meta/recipes-core/busybox/busybox/0001-Use-CC-when-linking-instead-of-LD-and-use-CFLAGS-and.patch @@ -0,0 +1,114 @@ +From a9333eb6a7b8dbda735947cd5bc981ff9352a2c9 Mon Sep 17 00:00:00 2001 +From: Nathan Phillip Brink <ohnobinki@ohnopublishing.net> +Date: Thu, 10 Mar 2011 00:27:08 -0500 +Subject: [PATCH 1/2] Use $(CC) when linking instead of $(LD) and use $(CFLAGS) + and $(EXTRA_CFLAGS) when linking. + +This fixes the issue where LDFLAGS escaped with -Wl are ignored during +compilation. It also simplifies using CFLAGS or EXTRA_CFLAGS (such as +-m32 on x86_64 or -flto) which apply to both compilation and linking +situations. + +Signed-off-by: Nathan Phillip Brink <ohnobinki@ohnopublishing.net> +--- +Upstream-Status: Pending + + Makefile | 7 ++++--- + scripts/Makefile.build | 8 ++++---- + scripts/Makefile.lib | 13 +++---------- + 3 files changed, 11 insertions(+), 17 deletions(-) + +Index: busybox-1.23.2/Makefile +=================================================================== +--- busybox-1.23.2.orig/Makefile ++++ busybox-1.23.2/Makefile +@@ -309,7 +309,8 @@ CHECKFLAGS := -D__linux__ -Dlinux -D + MODFLAGS = -DMODULE + CFLAGS_MODULE = $(MODFLAGS) + AFLAGS_MODULE = $(MODFLAGS) +-LDFLAGS_MODULE = -r ++LDFLAGS_RELOCATABLE = -r -nostdlib ++LDFLAGS_MODULE = $(LDFLAGS_RELOCATABLE) + CFLAGS_KERNEL = + AFLAGS_KERNEL = + +@@ -331,7 +332,7 @@ KERNELVERSION = $(VERSION).$(PATCHLEVEL) + export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION \ + ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ + CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \ +- HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS ++ HOSTCXX HOSTCXXFLAGS LDFLAGS_RELOCATABLE LDFLAGS_MODULE CHECK CHECKFLAGS + + export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS + export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE +@@ -610,7 +611,7 @@ quiet_cmd_busybox__ ?= LINK $@ + cmd_busybox__ ?= $(srctree)/scripts/trylink \ + "$@" \ + "$(CC)" \ +- "$(CFLAGS) $(CFLAGS_busybox)" \ ++ "$(CFLAGS) $(CFLAGS_busybox) $(EXTRA_CFLAGS)" \ + "$(LDFLAGS) $(EXTRA_LDFLAGS)" \ + "$(core-y)" \ + "$(libs-y)" \ +Index: busybox-1.23.2/scripts/Makefile.build +=================================================================== +--- busybox-1.23.2.orig/scripts/Makefile.build ++++ busybox-1.23.2/scripts/Makefile.build +@@ -174,7 +174,7 @@ cmd_modversions = \ + | $(GENKSYMS) -a $(ARCH) \ + > $(@D)/.tmp_$(@F:.o=.ver); \ + \ +- $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ ++ $(CC) $(ld_flags_partial) $(LDFLAGS_RELOCATABLE) -o $@ $(@D)/.tmp_$(@F) \ + -T $(@D)/.tmp_$(@F:.o=.ver); \ + rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ + else \ +@@ -257,7 +257,7 @@ quiet_cmd_link_o_target = LD $@ + # If the list of objects to link is empty, just create an empty built-in.o + # -nostdlib is added to make "make LD=gcc ..." work (some people use that) + cmd_link_o_target = $(if $(strip $(obj-y)),\ +- $(LD) -nostdlib $(ld_flags) -r -o $@ $(filter $(obj-y), $^),\ ++ $(CC) $(ld_flags_partial) $(LDFLAGS_RELOCATABLE) -o $@ $(filter $(obj-y), $^),\ + rm -f $@; $(AR) rcs $@) + + $(builtin-target): $(obj-y) FORCE +@@ -292,10 +292,10 @@ $($(subst $(obj)/,,$(@:.o=-objs))) \ + $($(subst $(obj)/,,$(@:.o=-y)))), $^) + + quiet_cmd_link_multi-y = LD $@ +-cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) ++cmd_link_multi-y = $(CC) $(ld_flags_partial) $(LDFLAGS_RELOCATABLE) -o $@ $(link_multi_deps) + + quiet_cmd_link_multi-m = LD [M] $@ +-cmd_link_multi-m = $(LD) $(ld_flags) $(LDFLAGS_MODULE) -o $@ $(link_multi_deps) ++cmd_link_multi-m = $(CC) $(ld_flags) $(LDFLAGS_MODULE) -o $@ $(link_multi_deps) + + # We would rather have a list of rules like + # foo.o: $(foo-objs) +Index: busybox-1.23.2/scripts/Makefile.lib +=================================================================== +--- busybox-1.23.2.orig/scripts/Makefile.lib ++++ busybox-1.23.2/scripts/Makefile.lib +@@ -121,7 +121,8 @@ cpp_flags = -Wp,-MD,$(depfile) $(NO + # yet ld_flags is fed to ld. + #ld_flags = $(LDFLAGS) $(EXTRA_LDFLAGS) + # Remove the -Wl, prefix from linker options normally passed through gcc +-ld_flags = $(filter-out -Wl$(comma)%,$(LDFLAGS) $(EXTRA_LDFLAGS)) ++ld_flags = $(filter-out -Wl$(comma)%,$(LDFLAGS) $(EXTRA_LDFLAGS) $(CFLAGS) $(EXTRA_CFLAGS)) ++ld_flags_partial = $($(filter-out -shared%, $(filter-out -pie%,$(ld_flags)))) + + + # Finds the multi-part object the current object will be linked into +@@ -151,10 +152,8 @@ $(obj)/%:: $(src)/%_shipped + # Linking + # --------------------------------------------------------------------------- + +-# TODO: LDFLAGS usually is supposed to contain gcc's flags, not ld's. +-# but here we feed them to ld! +-quiet_cmd_ld = LD $@ +-cmd_ld = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) \ ++quiet_cmd_ld = CC $@ ++cmd_ld = $(CC) $(ld_flags) $(LDFLAGS_$(@F)) \ + $(filter-out FORCE,$^) -o $@ + + # Objcopy diff --git a/meta/recipes-core/busybox/busybox/0001-chown-fix-help-text.patch b/meta/recipes-core/busybox/busybox/0001-chown-fix-help-text.patch deleted file mode 100644 index 4299799664..0000000000 --- a/meta/recipes-core/busybox/busybox/0001-chown-fix-help-text.patch +++ /dev/null @@ -1,34 +0,0 @@ -From d291c2fdd5cb8616605c67ecbfb04274fa094242 Mon Sep 17 00:00:00 2001 -From: Junling Zheng <zhengjunling@huawei.com> -Date: Sun, 7 Jun 2015 02:32:23 +0200 -Subject: [PATCH] chown: fix help text - -Derived from: -http://git.busybox.net/busybox/commit/?id=d291c2fdd5cb8616605c67ecbfb04274fa094242. - -Only when DESKTOP is enabled, chown has -L, -H and -P options. - -Upstream-Status: Backport - -Signed-off-by: Junling Zheng <zhengjunling@huawei.com> -Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> ---- - coreutils/chown.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/coreutils/chown.c b/coreutils/chown.c -index cb07bbc..679c0d8 100644 ---- a/coreutils/chown.c -+++ b/coreutils/chown.c -@@ -11,7 +11,7 @@ - /* http://www.opengroup.org/onlinepubs/007904975/utilities/chown.html */ - - //usage:#define chown_trivial_usage --//usage: "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." -+//usage: "[-Rh"IF_DESKTOP("LHPcvf")"]... OWNER[<.|:>[GROUP]] FILE..." - //usage:#define chown_full_usage "\n\n" - //usage: "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" - //usage: "\n -R Recurse" --- -1.8.3.4 - diff --git a/meta/recipes-core/busybox/busybox/0001-du-l-works-fix-to-use-145-instead-of-144.patch b/meta/recipes-core/busybox/busybox/0001-du-l-works-fix-to-use-145-instead-of-144.patch new file mode 100644 index 0000000000..bb5f7533ec --- /dev/null +++ b/meta/recipes-core/busybox/busybox/0001-du-l-works-fix-to-use-145-instead-of-144.patch @@ -0,0 +1,32 @@ +From c69feb2fdb755d6db34d0eb0a9e9994386c15e3a Mon Sep 17 00:00:00 2001 +From: Chen Qi <Qi.Chen@windriver.com> +Date: Wed, 14 Nov 2018 15:19:57 +0800 +Subject: [PATCH] du-l-works: fix to use 145 instead of 144 + +64 + 64 + 16 = 144 +144 + size_of_directory >= 145 +So fix to use 145 instead of 144. + +Upstream-Status: Submitted [http://lists.busybox.net/pipermail/busybox/2018-November/086836.html] + +Signed-off-by: Chen Qi <Qi.Chen@windriver.com> +--- + testsuite/du/du-l-works | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/testsuite/du/du-l-works b/testsuite/du/du-l-works +index af87345..575064a 100644 +--- a/testsuite/du/du-l-works ++++ b/testsuite/du/du-l-works +@@ -5,7 +5,7 @@ cd du.testdir + dd if=/dev/zero of=file1 bs=1k count=64 2>/dev/null + ln file1 file1.1 + dd if=/dev/zero of=file2 bs=1k count=16 2>/dev/null +-test x"`busybox du -l .`" = x"144 ." \ ++test x"`busybox du -l .`" = x"145 ." \ + -o x"`busybox du -l .`" = x"146 ." \ + -o x"`busybox du -l .`" = x"148 ." \ + -o x"`busybox du -l .`" = x"152 ." \ +-- +2.7.4 + diff --git a/meta/recipes-core/busybox/busybox/0001-ifconfig-fix-double-free-fatal-error-in-INET_sprint.patch b/meta/recipes-core/busybox/busybox/0001-ifconfig-fix-double-free-fatal-error-in-INET_sprint.patch deleted file mode 100644 index 2d729b1b05..0000000000 --- a/meta/recipes-core/busybox/busybox/0001-ifconfig-fix-double-free-fatal-error-in-INET_sprint.patch +++ /dev/null @@ -1,67 +0,0 @@ -From a97777889328157bb7d06ec618bad16712a9c345 Mon Sep 17 00:00:00 2001 -From: Denys Vlasenko <vda.linux@googlemail.com> -Date: Tue, 3 Feb 2015 12:11:30 +0100 -Subject: [PATCH] ifconfig: fix double free fatal error in INET_sprint - -Derived from: -http://git.busybox.net/busybox/commit/?id=a97777889328157bb7d06ec618bad16712a9c345. - -While INET_sprint or INET6_sprint is called circularly by keeping -ifconfiging, sap->sa_family would be cleaned by other parallel processes -such as dhclient sometimes, and then there would be a double free error -like the following: - - *** glibc detected *** ifconfig: double free or corruption (fasttop): 0x000a6008 *** - ======= Backtrace: ========= - /lib/libc.so.6(+0x6bc84)[0x40133c84] - /lib/libc.so.6(cfree+0x94)[0x40138684] - ifconfig[0x1c460] - ifconfig[0x1c6a0] - ifconfig[0x1ccf4] - ifconfig[0x187c8] - ifconfig[0xd544] - ifconfig[0xd5dc] - ifconfig[0xdca8] - /lib/libc.so.6(__libc_start_main+0x110)[0x400df258] - ======= Memory map: ======== - 00008000-0009c000 r-xp 00000000 1f:05 444328 /bin/busybox - 000a3000-000a4000 rw-p 00093000 1f:05 444328 /bin/busybox - -This patch moved free() two lines down to address this problem. - -Upstream-Status: Backport - -Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> ---- - networking/interface.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/networking/interface.c b/networking/interface.c -index bf7d2b1..b0572d0 100644 ---- a/networking/interface.c -+++ b/networking/interface.c -@@ -91,9 +91,9 @@ static const char* FAST_FUNC INET_sprint(struct sockaddr *sap, int numeric) - { - static char *buff; /* defaults to NULL */ - -- free(buff); - if (sap->sa_family == 0xFFFF || sap->sa_family == 0) - return "[NONE SET]"; -+ free(buff); - buff = INET_rresolve((struct sockaddr_in *) sap, numeric, 0xffffff00); - return buff; - } -@@ -173,9 +173,9 @@ static const char* FAST_FUNC INET6_sprint(struct sockaddr *sap, int numeric) - { - static char *buff; - -- free(buff); - if (sap->sa_family == 0xFFFF || sap->sa_family == 0) - return "[NONE SET]"; -+ free(buff); - buff = INET6_rresolve((struct sockaddr_in6 *) sap, numeric); - return buff; - } --- -1.8.3.4 - diff --git a/meta/recipes-core/busybox/busybox/0001-mktemp-add-tmpdir-option.patch b/meta/recipes-core/busybox/busybox/0001-mktemp-add-tmpdir-option.patch new file mode 100644 index 0000000000..4a1960dff2 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/0001-mktemp-add-tmpdir-option.patch @@ -0,0 +1,81 @@ +From ceb378209f953ea745ed93a8645567196380ce3c Mon Sep 17 00:00:00 2001 +From: Andrej Valek <andrej.valek@siemens.com> +Date: Thu, 24 Jun 2021 19:13:22 +0200 +Subject: [PATCH] mktemp: add tmpdir option + +Make mktemp more compatible with coreutils. +- add "--tmpdir" option +- add long variants for "d,q,u" options + +Upstream-Status: Submitted [http://lists.busybox.net/pipermail/busybox/2021-June/088932.html] + +Signed-off-by: Andrej Valek <andrej.valek@siemens.com> +Signed-off-by: Peter Marko <peter.marko@siemens.com> +--- + coreutils/mktemp.c | 26 ++++++++++++++++++-------- + 1 file changed, 18 insertions(+), 8 deletions(-) + +diff --git a/coreutils/mktemp.c b/coreutils/mktemp.c +index 5393320a5..05c6d98c6 100644 +--- a/coreutils/mktemp.c ++++ b/coreutils/mktemp.c +@@ -39,16 +39,17 @@ + //kbuild:lib-$(CONFIG_MKTEMP) += mktemp.o + + //usage:#define mktemp_trivial_usage +-//usage: "[-dt] [-p DIR] [TEMPLATE]" ++//usage: "[-dt] [-p DIR, --tmpdir[=DIR]] [TEMPLATE]" + //usage:#define mktemp_full_usage "\n\n" + //usage: "Create a temporary file with name based on TEMPLATE and print its name.\n" + //usage: "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" + //usage: "Without TEMPLATE, -t tmp.XXXXXX is assumed.\n" +-//usage: "\n -d Make directory, not file" +-//usage: "\n -q Fail silently on errors" +-//usage: "\n -t Prepend base directory name to TEMPLATE" +-//usage: "\n -p DIR Use DIR as a base directory (implies -t)" +-//usage: "\n -u Do not create anything; print a name" ++//usage: "\n -d Make directory, not file" ++//usage: "\n -q Fail silently on errors" ++//usage: "\n -t Prepend base directory name to TEMPLATE" ++//usage: "\n -p DIR, --tmpdir[=DIR] Use DIR as a base directory (implies -t)" ++//usage: "\n For --tmpdir is a optional one." ++//usage: "\n -u Do not create anything; print a name" + //usage: "\n" + //usage: "\nBase directory is: -p DIR, else $TMPDIR, else /tmp" + //usage: +@@ -72,13 +73,22 @@ int mktemp_main(int argc UNUSED_PARAM, char **argv) + OPT_t = 1 << 2, + OPT_p = 1 << 3, + OPT_u = 1 << 4, ++ OPT_td = 1 << 5, + }; + + path = getenv("TMPDIR"); + if (!path || path[0] == '\0') + path = "/tmp"; + +- opts = getopt32(argv, "^" "dqtp:u" "\0" "?1"/*1 arg max*/, &path); ++ opts = getopt32long(argv, "^" ++ "dqtp:u\0" ++ "?1" /* 1 arg max */, ++ "directory\0" No_argument "d" ++ "quiet\0" No_argument "q" ++ "dry-run\0" No_argument "u" ++ "tmpdir\0" Optional_argument "\xff" ++ , &path, &path ++ ); + + chp = argv[optind]; + if (!chp) { +@@ -95,7 +105,7 @@ int mktemp_main(int argc UNUSED_PARAM, char **argv) + goto error; + } + #endif +- if (opts & (OPT_t|OPT_p)) ++ if (opts & (OPT_t|OPT_p|OPT_td)) + chp = concat_path_file(path, chp); + + if (opts & OPT_u) { +-- +2.11.0 + diff --git a/meta/recipes-core/busybox/busybox/0001-sysctl-ignore-EIO-of-stable_secret-below-proc-sys-ne.patch b/meta/recipes-core/busybox/busybox/0001-sysctl-ignore-EIO-of-stable_secret-below-proc-sys-ne.patch new file mode 100644 index 0000000000..9f58eaef67 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/0001-sysctl-ignore-EIO-of-stable_secret-below-proc-sys-ne.patch @@ -0,0 +1,40 @@ +From 3bee0460d74bad88eca6592e63ca926961b43b67 Mon Sep 17 00:00:00 2001 +From: Yi Zhao <yi.zhao@windriver.com> +Date: Fri, 6 Mar 2020 16:09:26 +0800 +Subject: [PATCH] sysctl: ignore EIO of stable_secret below + /proc/sys/net/ipv6/conf + +Avoid confusing messages caused by EIO on reading +/proc/sys/net/ipv6/conf/*/stable_secret if those are not set yet. +Make it behave the same as procps(>=3.3.13). + +Upstream-Status: Submitted [busybox@busybox.net mailing list] + +Signed-off-by: Yi Zhao <yi.zhao@windriver.com> +--- + procps/sysctl.c | 9 ++++++++- + 1 file changed, 8 insertions(+), 1 deletion(-) + +diff --git a/procps/sysctl.c b/procps/sysctl.c +index 6d77185ca..42c51cc91 100644 +--- a/procps/sysctl.c ++++ b/procps/sysctl.c +@@ -202,7 +202,14 @@ static int sysctl_act_on_setting(char *setting) + value = cptr = xmalloc_read(fd, NULL); + close(fd); + if (value == NULL) { +- bb_perror_msg("error reading key '%s'", outname); ++ switch (errno) { ++ case EIO: ++ /* Ignore stable_secret below /proc/sys/net/ipv6/conf */ ++ break; ++ default: ++ bb_perror_msg("error reading key '%s'", outname); ++ break; ++ } + retval = EXIT_FAILURE; + goto end; + } +-- +2.17.1 + diff --git a/meta/recipes-core/busybox/busybox/0001-testsuite-check-uudecode-before-using-it.patch b/meta/recipes-core/busybox/busybox/0001-testsuite-check-uudecode-before-using-it.patch new file mode 100644 index 0000000000..d4bda3c12f --- /dev/null +++ b/meta/recipes-core/busybox/busybox/0001-testsuite-check-uudecode-before-using-it.patch @@ -0,0 +1,45 @@ +From 85f164ec427fecbae24140b3c93acbbe2ba1c817 Mon Sep 17 00:00:00 2001 +From: Chen Qi <Qi.Chen@windriver.com> +Date: Tue, 13 Nov 2018 11:27:01 +0800 +Subject: [PATCH] testsuite: check uudecode before using it + +The unzip and tar test cases use uudecode command, so also +check it via optional function. + +Upstream-Status: Submitted [http://lists.busybox.net/pipermail/busybox/2018-November/086833.html] + +Signed-off-by: Chen Qi <Qi.Chen@windriver.com> +--- + testsuite/tar.tests | 2 +- + testsuite/unzip.tests | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/testsuite/tar.tests b/testsuite/tar.tests +index d71a349..8c88567 100755 +--- a/testsuite/tar.tests ++++ b/testsuite/tar.tests +@@ -339,7 +339,7 @@ cd .. || exit 1; rm -rf tar.tempdir 2>/d + fi + + mkdir tar.tempdir && cd tar.tempdir || exit 1 +-optional FEATURE_SEAMLESS_BZ2 FEATURE_TAR_AUTODETECT LS ++optional FEATURE_SEAMLESS_BZ2 FEATURE_TAR_AUTODETECT LS UUDECODE + testing "tar Symlink attack: create symlink and then write through it" '\ + exec 2>&1 + uudecode -o input && tar xvf input; echo $? +diff --git a/testsuite/unzip.tests b/testsuite/unzip.tests +index af53de9..3b45ece 100755 +--- a/testsuite/unzip.tests ++++ b/testsuite/unzip.tests +@@ -31,7 +31,7 @@ rmdir foo + rm foo.zip + + # File containing some damaged encrypted stream +-optional FEATURE_UNZIP_CDF CONFIG_UNICODE_SUPPORT ++optional FEATURE_UNZIP_CDF CONFIG_UNICODE_SUPPORT UUDECODE + testing "unzip (bad archive)" "uudecode; unzip bad.zip 2>&1; echo \$?" \ + "Archive: bad.zip + inflating: ]3j½r«I??K-%Ix +-- +2.7.4 + diff --git a/meta/recipes-core/busybox/busybox/0001-testsuite-use-www.example.org-for-wget-test-cases.patch b/meta/recipes-core/busybox/busybox/0001-testsuite-use-www.example.org-for-wget-test-cases.patch new file mode 100644 index 0000000000..7ba0f77fa2 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/0001-testsuite-use-www.example.org-for-wget-test-cases.patch @@ -0,0 +1,62 @@ +From 03acf460990dfcf6e52b298301b348b9504460a8 Mon Sep 17 00:00:00 2001 +From: Chen Qi <Qi.Chen@windriver.com> +Date: Tue, 13 Nov 2018 13:51:42 +0800 +Subject: [PATCH] testsuite: use www.example.org for wget test cases + +Use example.org instead of google.com to make sure it's +always reachible. + +Upstream-Status: Submitted [http://lists.busybox.net/pipermail/busybox/2018-November/086835.html] + +Signed-off-by: Chen Qi <Qi.Chen@windriver.com> +--- + testsuite/wget/wget--O-overrides--P | 2 +- + testsuite/wget/wget-handles-empty-path | 2 +- + testsuite/wget/wget-retrieves-google-index | 2 +- + testsuite/wget/wget-supports--P | 2 +- + 4 files changed, 4 insertions(+), 4 deletions(-) + +diff --git a/testsuite/wget/wget--O-overrides--P b/testsuite/wget/wget--O-overrides--P +index 40a3a96..490d743 100644 +--- a/testsuite/wget/wget--O-overrides--P ++++ b/testsuite/wget/wget--O-overrides--P +@@ -1,5 +1,5 @@ + test x"$SKIP_INTERNET_TESTS" != x"" && exit + + mkdir foo +-busybox wget -q -O index.html -P foo http://www.google.com/ ++busybox wget -q -O index.html -P foo http://www.example.org/ + test -s index.html +diff --git a/testsuite/wget/wget-handles-empty-path b/testsuite/wget/wget-handles-empty-path +index 01d60bd..1802db6 100644 +--- a/testsuite/wget/wget-handles-empty-path ++++ b/testsuite/wget/wget-handles-empty-path +@@ -1,3 +1,3 @@ + test x"$SKIP_INTERNET_TESTS" != x"" && exit + +-busybox wget http://www.google.com ++busybox wget http://www.example.org +diff --git a/testsuite/wget/wget-retrieves-google-index b/testsuite/wget/wget-retrieves-google-index +index f9dbb8b..fc801d4 100644 +--- a/testsuite/wget/wget-retrieves-google-index ++++ b/testsuite/wget/wget-retrieves-google-index +@@ -1,4 +1,4 @@ + test x"$SKIP_INTERNET_TESTS" != x"" && exit + +-busybox wget -q -O foo http://www.google.com/ ++busybox wget -q -O foo http://www.example.org/ + test -s foo +diff --git a/testsuite/wget/wget-supports--P b/testsuite/wget/wget-supports--P +index bfe4ac4..4ff2fe0 100644 +--- a/testsuite/wget/wget-supports--P ++++ b/testsuite/wget/wget-supports--P +@@ -1,5 +1,5 @@ + test x"$SKIP_INTERNET_TESTS" != x"" && exit + + mkdir foo +-busybox wget -q -P foo http://www.google.com/ ++busybox wget -q -P foo http://www.example.org/ + test -s foo/index.html +-- +2.7.4 + diff --git a/meta/recipes-core/busybox/busybox/busybox-appletlib-dependency.patch b/meta/recipes-core/busybox/busybox/busybox-appletlib-dependency.patch deleted file mode 100644 index de2dbcceb1..0000000000 --- a/meta/recipes-core/busybox/busybox/busybox-appletlib-dependency.patch +++ /dev/null @@ -1,37 +0,0 @@ -Upstream-Status: Pending - -# copy commit message from OE as the patch comment: -# commit 98c24291aa165f53423c27ae033831ce0b3bb676 -# Author: Roman I Khimov <khimov@altell.ru> -# Date: Thu Mar 26 23:03:58 2009 +0000 -# -# busybox: update appletlib dependency patch -# -# Previous version still failed from time to time on clean-start builds -# with 4 bitbake threads and '-j16'. Building busybox as sole target worked -# well. -# -# The reason is that previous version introduced a race between applets make -# processes spawned from top-level Makefile and from libbb Makefile. -# -# Fix it with high-level dependency that doesn't create races. -# -# Signed-off-by: Koen Kooi <koen@openembedded.org> -# -# above comment added by Kevin Tian <kevin.tian@intel.com>, 2010-07-06 - -Index: busybox-1.13.2/Makefile -=================================================================== ---- busybox-1.13.2.orig/Makefile 2009-03-19 15:44:37.419270265 +0300 -+++ busybox-1.13.2/Makefile 2009-03-19 15:45:57.737521296 +0300 -@@ -471,6 +471,10 @@ - util-linux/ \ - util-linux/volume_id/ \ - -+# Lib interdeps -+# libbb uses headers generated in applets -+libbb: applets -+ - endif # KBUILD_EXTMOD - - ifeq ($(dot-config),1) diff --git a/meta/recipes-core/busybox/busybox/busybox-cross-menuconfig.patch b/meta/recipes-core/busybox/busybox/busybox-cross-menuconfig.patch index 781f5af14a..6faca227f7 100644 --- a/meta/recipes-core/busybox/busybox/busybox-cross-menuconfig.patch +++ b/meta/recipes-core/busybox/busybox/busybox-cross-menuconfig.patch @@ -2,7 +2,7 @@ From: Jason Wessel <jason.wessel@windriver.com> Date: Sun, 3 Mar 2013 12:31:40 -0600 Subject: [PATCH] menuconfig,check-lxdiaglog.sh: Allow specification of ncurses location -Upstream-status: Submitted +Upstream-Status: Submitted [ based on: https://lkml.org/lkml/2013/3/3/103 ] @@ -33,7 +33,7 @@ cc: linux-kbuild@vger.kernel.org scripts/kconfig/lxdialog/Makefile | 2 +- scripts/kconfig/lxdialog/check-lxdialog.sh | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-) - + --- a/scripts/kconfig/lxdialog/check-lxdialog.sh +++ b/scripts/kconfig/lxdialog/check-lxdialog.sh @@ -4,6 +4,10 @@ @@ -44,10 +44,10 @@ cc: linux-kbuild@vger.kernel.org + echo "$CROSS_CURSES_LIB" + exit + fi - for ext in so a dylib ; do - for lib in ncursesw ncurses curses ; do - $cc -print-file-name=lib${lib}.${ext} | grep -q / -@@ -19,6 +23,10 @@ ldflags() + pkg-config --libs ncursesw 2>/dev/null && exit + pkg-config --libs ncurses 2>/dev/null && exit + for ext in so a dll.a dylib ; do +@@ -21,6 +25,10 @@ # Where is ncurses.h? ccflags() { @@ -55,12 +55,12 @@ cc: linux-kbuild@vger.kernel.org + echo "$CROSS_CURSES_INC" + exit + fi - if [ -f /usr/include/ncursesw/ncurses.h ]; then - echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncurses.h>"' - elif [ -f /usr/include/ncursesw/curses.h ]; then + if pkg-config --cflags ncursesw 2>/dev/null; then + echo '-DCURSES_LOC="<ncurses.h>" -DNCURSES_WIDECHAR=1' + elif pkg-config --cflags ncurses 2>/dev/null; then --- a/scripts/kconfig/lxdialog/Makefile +++ b/scripts/kconfig/lxdialog/Makefile -@@ -5,7 +5,7 @@ check-lxdialog := $(srctree)/$(src)/che +@@ -5,7 +5,7 @@ # Use reursively expanded variables so we do not call gcc unless # we really need to do so. (Do not call gcc as part of make mrproper) diff --git a/meta/recipes-core/busybox/busybox/busybox-udhcpc-no_deconfig.patch b/meta/recipes-core/busybox/busybox/busybox-udhcpc-no_deconfig.patch index 4c9ce3b711..948932a3e8 100644 --- a/meta/recipes-core/busybox/busybox/busybox-udhcpc-no_deconfig.patch +++ b/meta/recipes-core/busybox/busybox/busybox-udhcpc-no_deconfig.patch @@ -28,110 +28,60 @@ Fixed options -b, -a and -P. Signed-off-by: Andreas Oberritter <obi@opendreambox.org> --- - networking/udhcp/dhcpc.c | 29 +++++++++++++++++++++-------- - 1 files changed, 21 insertions(+), 8 deletions(-) + networking/udhcp/dhcpc.c | 29 ++++++++++++++++------ + 1 file changed, 21 insertions(+), 8 deletions(-) -Index: busybox-1.20.2/networking/udhcp/dhcpc.c +Index: busybox-1.34.0/networking/udhcp/dhcpc.c =================================================================== ---- busybox-1.20.2.orig/networking/udhcp/dhcpc.c -+++ busybox-1.20.2/networking/udhcp/dhcpc.c -@@ -29,6 +29,9 @@ - #include <netpacket/packet.h> - #include <linux/filter.h> +--- busybox-1.34.0.orig/networking/udhcp/dhcpc.c ++++ busybox-1.34.0/networking/udhcp/dhcpc.c +@@ -48,6 +48,8 @@ + }; + #endif +/* option whether to down the interface when reconfiguring */ +static int allow_deconfig = 1; -+ - /* "struct client_config_t client_config" is in bb_common_bufsiz1 */ + /* "struct client_data_t client_data" is in bb_common_bufsiz1 */ -@@ -81,8 +84,9 @@ enum { - OPT_x = 1 << 18, - OPT_f = 1 << 19, - OPT_B = 1 << 20, -+ OPT_D = 1 << 21, +@@ -100,8 +102,10 @@ + OPT_x = 1 << 16, + OPT_f = 1 << 17, + OPT_B = 1 << 18, ++ OPT_D = 1 << 19, /* The rest has variable bit positions, need to be clever */ -- OPTBIT_B = 20, -+ OPTBIT_D = 21, + OPTBIT_B = 18, ++ OPTBIT_D = 19, USE_FOR_MMU( OPTBIT_b,) IF_FEATURE_UDHCPC_ARPING(OPTBIT_a,) IF_FEATURE_UDHCP_PORT( OPTBIT_P,) -@@ -1040,7 +1044,8 @@ static void perform_renew(void) - state = RENEW_REQUESTED; - break; - case RENEW_REQUESTED: /* impatient are we? fine, square 1 */ -- udhcp_run_script(NULL, "deconfig"); -+ if (allow_deconfig) -+ udhcp_run_script(NULL, "deconfig"); - case REQUESTING: - case RELEASED: - change_listen_mode(LISTEN_RAW); -@@ -1064,7 +1069,8 @@ static void perform_release(uint32_t ser - bb_info_msg("Unicasting a release of %s to %s", - inet_ntoa(temp_addr), buffer); - send_release(server_addr, requested_ip); /* unicast */ -- udhcp_run_script(NULL, "deconfig"); -+ if (allow_deconfig) -+ udhcp_run_script(NULL, "deconfig"); - } - bb_info_msg("Entering released state"); +@@ -587,7 +591,8 @@ + + static void d4_run_script_deconfig(void) + { +- d4_run_script(NULL, "deconfig"); ++ if (allow_deconfig) ++ d4_run_script(NULL, "deconfig"); + } -@@ -1215,7 +1221,7 @@ int udhcpc_main(int argc UNUSED_PARAM, c - /* O,x: list; -T,-t,-A take numeric param */ - opt_complementary = "O::x::T+:t+:A+" IF_UDHCP_VERBOSE(":vv") ; - IF_LONG_OPTS(applet_long_options = udhcpc_longopts;) -- opt = getopt32(argv, "CV:H:h:F:i:np:qRr:s:T:t:SA:O:ox:fB" -+ opt = getopt32(argv, "CV:H:h:F:i:np:qRr:s:T:t:SA:O:ox:fBD" + /*** Sending/receiving packets ***/ +@@ -1244,7 +1249,7 @@ + /* Parse command line */ + opt = getopt32long(argv, "^" + /* O,x: list; -T,-t,-A take numeric param */ +- "CV:F:i:np:qRr:s:T:+t:+SA:+O:*ox:*fB" ++ "CV:F:i:np:qRr:s:T:+t:+SA:+O:*ox:*fBD" USE_FOR_MMU("b") - IF_FEATURE_UDHCPC_ARPING("a") + IF_FEATURE_UDHCPC_ARPING("a::") IF_FEATURE_UDHCP_PORT("P:") -@@ -1316,6 +1322,9 @@ int udhcpc_main(int argc UNUSED_PARAM, c +@@ -1361,6 +1366,10 @@ logmode |= LOGMODE_SYSLOG; } -+ if (opt & OPT_D) ++ if (opt & OPT_D) { + allow_deconfig = 0; ++ } + - /* Make sure fd 0,1,2 are open */ - bb_sanitize_stdio(); - /* Equivalent of doing a fflush after every \n */ -@@ -1330,7 +1339,8 @@ int udhcpc_main(int argc UNUSED_PARAM, c - srand(monotonic_us()); - - state = INIT_SELECTING; -- udhcp_run_script(NULL, "deconfig"); -+ if (allow_deconfig) -+ udhcp_run_script(NULL, "deconfig"); - change_listen_mode(LISTEN_RAW); - packet_num = 0; - timeout = 0; -@@ -1484,7 +1494,8 @@ int udhcpc_main(int argc UNUSED_PARAM, c - } - /* Timed out, enter init state */ - bb_info_msg("Lease lost, entering init state"); -- udhcp_run_script(NULL, "deconfig"); -+ if (allow_deconfig) -+ udhcp_run_script(NULL, "deconfig"); - state = INIT_SELECTING; - client_config.first_secs = 0; /* make secs field count from 0 */ - /*timeout = 0; - already is */ -@@ -1667,7 +1678,8 @@ int udhcpc_main(int argc UNUSED_PARAM, c - send_decline(/*xid,*/ server_addr, packet.yiaddr); - - if (state != REQUESTING) -- udhcp_run_script(NULL, "deconfig"); -+ if (allow_deconfig) -+ udhcp_run_script(NULL, "deconfig"); - change_listen_mode(LISTEN_RAW); - state = INIT_SELECTING; - client_config.first_secs = 0; /* make secs field count from 0 */ -@@ -1711,7 +1723,8 @@ int udhcpc_main(int argc UNUSED_PARAM, c - bb_info_msg("Received DHCP NAK"); - udhcp_run_script(&packet, "nak"); - if (state != REQUESTING) -- udhcp_run_script(NULL, "deconfig"); -+ if (allow_deconfig) -+ udhcp_run_script(NULL, "deconfig"); - change_listen_mode(LISTEN_RAW); - sleep(3); /* avoid excessive network traffic */ - state = INIT_SELECTING; + /* Create pidfile */ + write_pidfile(client_data.pidfile); + /* Goes to stdout (unless NOMMU) and possibly syslog */ diff --git a/meta/recipes-core/busybox/busybox/defconfig b/meta/recipes-core/busybox/busybox/defconfig index 4f5df9ebee..16c61a84b2 100644 --- a/meta/recipes-core/busybox/busybox/defconfig +++ b/meta/recipes-core/busybox/busybox/defconfig @@ -1,58 +1,41 @@ # # Automatically generated make config: don't edit -# Busybox version: 1.23.2 -# Thu Jul 30 11:00:00 2015 +# Busybox version: 1.34.0 +# Wed Aug 23 09:07:25 2021 # CONFIG_HAVE_DOT_CONFIG=y # -# Busybox Settings -# - -# -# General Configuration +# Settings # # CONFIG_DESKTOP is not set # CONFIG_EXTRA_COMPAT is not set +# CONFIG_FEDORA_COMPAT is not set # CONFIG_INCLUDE_SUSv2 is not set -# CONFIG_USE_PORTABLE_CODE is not set -CONFIG_PLATFORM_LINUX=y -CONFIG_FEATURE_BUFFERS_USE_MALLOC=y -# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set -# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set +CONFIG_LONG_OPTS=y CONFIG_SHOW_USAGE=y # CONFIG_FEATURE_VERBOSE_USAGE is not set CONFIG_FEATURE_COMPRESS_USAGE=y -# CONFIG_FEATURE_INSTALLER is not set -# CONFIG_INSTALL_NO_USR is not set -# CONFIG_LOCALE_SUPPORT is not set -# CONFIG_UNICODE_SUPPORT is not set -# CONFIG_UNICODE_USING_LOCALE is not set -# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set -CONFIG_SUBST_WCHAR=0 -CONFIG_LAST_SUPPORTED_WCHAR=0 -# CONFIG_UNICODE_COMBINING_WCHARS is not set -# CONFIG_UNICODE_WIDE_WCHARS is not set -# CONFIG_UNICODE_BIDI_SUPPORT is not set -# CONFIG_UNICODE_NEUTRAL_TABLE is not set -# CONFIG_UNICODE_PRESERVE_BROKEN is not set +CONFIG_LFS=y # CONFIG_PAM is not set -CONFIG_FEATURE_USE_SENDFILE=y -CONFIG_LONG_OPTS=y CONFIG_FEATURE_DEVPTS=y -# CONFIG_FEATURE_CLEAN_UP is not set CONFIG_FEATURE_UTMP=y # CONFIG_FEATURE_WTMP is not set CONFIG_FEATURE_PIDFILE=y CONFIG_PID_FILE_PATH="/var/run" +CONFIG_BUSYBOX=y +# CONFIG_FEATURE_SHOW_SCRIPT is not set +# CONFIG_FEATURE_INSTALLER is not set +# CONFIG_INSTALL_NO_USR is not set CONFIG_FEATURE_SUID=y CONFIG_FEATURE_SUID_CONFIG=y CONFIG_FEATURE_SUID_CONFIG_QUIET=y -# CONFIG_SELINUX is not set # CONFIG_FEATURE_PREFER_APPLETS is not set CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" +# CONFIG_SELINUX is not set +# CONFIG_FEATURE_CLEAN_UP is not set +CONFIG_FEATURE_SYSLOG_INFO=y CONFIG_FEATURE_SYSLOG=y -CONFIG_FEATURE_HAVE_RPC=y # # Build Options @@ -61,25 +44,17 @@ CONFIG_FEATURE_HAVE_RPC=y # CONFIG_PIE is not set # CONFIG_NOMMU is not set # CONFIG_BUILD_LIBBUSYBOX is not set +# CONFIG_FEATURE_LIBBUSYBOX_STATIC is not set # CONFIG_FEATURE_INDIVIDUAL is not set # CONFIG_FEATURE_SHARED_BUSYBOX is not set -CONFIG_LFS=y -# CONFIG_CROSS_COMPILER_PREFIX is not set +CONFIG_CROSS_COMPILER_PREFIX="" CONFIG_SYSROOT="" -# CONFIG_EXTRA_CFLAGS is not set +CONFIG_EXTRA_CFLAGS="" CONFIG_EXTRA_LDFLAGS="" CONFIG_EXTRA_LDLIBS="" - -# -# Debugging Options -# -# CONFIG_DEBUG is not set -# CONFIG_DEBUG_PESSIMIZE is not set -# CONFIG_UNIT_TEST is not set -# CONFIG_WERROR is not set -CONFIG_NO_DEBUG_LIB=y -# CONFIG_DMALLOC is not set -# CONFIG_EFENCE is not set +# CONFIG_USE_PORTABLE_CODE is not set +CONFIG_STACK_OPTIMIZATION_386=y +CONFIG_STATIC_LIBGCC=y # # Installation Options ("make install" behavior) @@ -94,16 +69,34 @@ CONFIG_INSTALL_APPLET_SYMLINKS=y CONFIG_PREFIX="./_install" # -# Busybox Library Tuning +# Debugging Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_PESSIMIZE is not set +# CONFIG_DEBUG_SANITIZE is not set +# CONFIG_UNIT_TEST is not set +# CONFIG_WERROR is not set +# CONFIG_WARN_SIMPLE_MSG is not set +CONFIG_NO_DEBUG_LIB=y +# CONFIG_DMALLOC is not set +# CONFIG_EFENCE is not set + +# +# Library Tuning # -CONFIG_FEATURE_SYSTEMD=y +# CONFIG_FEATURE_USE_BSS_TAIL is not set +CONFIG_FLOAT_DURATION=y CONFIG_FEATURE_RTMINMAX=y +# CONFIG_FEATURE_RTMINMAX_USE_LIBC_DEFINITIONS is not set +CONFIG_FEATURE_BUFFERS_USE_MALLOC=y +# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set +# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set CONFIG_PASSWORD_MINLEN=6 CONFIG_MD5_SMALL=1 CONFIG_SHA3_SMALL=1 CONFIG_FEATURE_FAST_TOP=y # CONFIG_FEATURE_ETC_NETWORKS is not set -CONFIG_FEATURE_USE_TERMIOS=y +# CONFIG_FEATURE_ETC_SERVICES is not set CONFIG_FEATURE_EDITING=y CONFIG_FEATURE_EDITING_MAX_LEN=1024 # CONFIG_FEATURE_EDITING_VI is not set @@ -114,9 +107,22 @@ CONFIG_FEATURE_EDITING_SAVEHISTORY=y CONFIG_FEATURE_TAB_COMPLETION=y CONFIG_FEATURE_USERNAME_COMPLETION=y CONFIG_FEATURE_EDITING_FANCY_PROMPT=y +# CONFIG_FEATURE_EDITING_WINCH is not set # CONFIG_FEATURE_EDITING_ASK_TERMINAL is not set +# CONFIG_LOCALE_SUPPORT is not set +CONFIG_UNICODE_SUPPORT=y +# CONFIG_UNICODE_USING_LOCALE is not set +CONFIG_FEATURE_CHECK_UNICODE_IN_ENV=y +CONFIG_SUBST_WCHAR=63 +CONFIG_LAST_SUPPORTED_WCHAR=767 +CONFIG_UNICODE_COMBINING_WCHARS=y +CONFIG_UNICODE_WIDE_WCHARS=y +# CONFIG_UNICODE_BIDI_SUPPORT is not set +# CONFIG_UNICODE_NEUTRAL_TABLE is not set +# CONFIG_UNICODE_PRESERVE_BROKEN is not set CONFIG_FEATURE_NON_POSIX_CP=y # CONFIG_FEATURE_VERBOSE_CP_MESSAGE is not set +CONFIG_FEATURE_USE_SENDFILE=y CONFIG_FEATURE_COPYBUF_KB=4 CONFIG_FEATURE_SKIP_ROOTFS=y CONFIG_MONOTONIC_SYSCALL=y @@ -135,86 +141,88 @@ CONFIG_FEATURE_SEAMLESS_LZMA=y CONFIG_FEATURE_SEAMLESS_BZ2=y CONFIG_FEATURE_SEAMLESS_GZ=y CONFIG_FEATURE_SEAMLESS_Z=y -CONFIG_AR=y +# CONFIG_AR is not set # CONFIG_FEATURE_AR_LONG_FILENAMES is not set # CONFIG_FEATURE_AR_CREATE is not set # CONFIG_UNCOMPRESS is not set CONFIG_GUNZIP=y +CONFIG_ZCAT=y +CONFIG_FEATURE_GUNZIP_LONG_OPTIONS=y CONFIG_BUNZIP2=y +CONFIG_BZCAT=y # CONFIG_UNLZMA is not set -# CONFIG_FEATURE_LZMA_FAST is not set +CONFIG_LZCAT=y # CONFIG_LZMA is not set # CONFIG_UNXZ is not set +CONFIG_XZCAT=y # CONFIG_XZ is not set -# CONFIG_BZIP2 is not set +CONFIG_BZIP2=y +CONFIG_BZIP2_SMALL=8 +CONFIG_FEATURE_BZIP2_DECOMPRESS=y CONFIG_CPIO=y # CONFIG_FEATURE_CPIO_O is not set # CONFIG_FEATURE_CPIO_P is not set # CONFIG_DPKG is not set # CONFIG_DPKG_DEB is not set -# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set CONFIG_GZIP=y # CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set CONFIG_GZIP_FAST=0 +# CONFIG_FEATURE_GZIP_LEVELS is not set +CONFIG_FEATURE_GZIP_DECOMPRESS=y # CONFIG_LZOP is not set +# CONFIG_UNLZOP is not set +# CONFIG_LZOPCAT is not set # CONFIG_LZOP_COMPR_HIGH is not set # CONFIG_RPM is not set # CONFIG_RPM2CPIO is not set CONFIG_TAR=y +# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set CONFIG_FEATURE_TAR_CREATE=y CONFIG_FEATURE_TAR_AUTODETECT=y CONFIG_FEATURE_TAR_FROM=y CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y # CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y -# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set # CONFIG_FEATURE_TAR_TO_COMMAND is not set # CONFIG_FEATURE_TAR_UNAME_GNAME is not set CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y # CONFIG_FEATURE_TAR_SELINUX is not set CONFIG_UNZIP=y +CONFIG_FEATURE_UNZIP_CDF=y +# CONFIG_FEATURE_UNZIP_BZIP2 is not set +# CONFIG_FEATURE_UNZIP_LZMA is not set +# CONFIG_FEATURE_UNZIP_XZ is not set +# CONFIG_FEATURE_LZMA_FAST is not set # # Coreutils # CONFIG_BASENAME=y CONFIG_CAT=y -CONFIG_DATE=y -# CONFIG_FEATURE_DATE_ISOFMT is not set -# CONFIG_FEATURE_DATE_NANO is not set -CONFIG_FEATURE_DATE_COMPAT=y -# CONFIG_HOSTID is not set -CONFIG_ID=y -CONFIG_GROUPS=y -CONFIG_SHUF=y -CONFIG_TEST=y -CONFIG_FEATURE_TEST_64=y -CONFIG_TOUCH=y -CONFIG_FEATURE_TOUCH_NODEREF=y -CONFIG_FEATURE_TOUCH_SUSV3=y -CONFIG_TR=y -CONFIG_FEATURE_TR_CLASSES=y -# CONFIG_FEATURE_TR_EQUIV is not set -CONFIG_UNLINK=y -# CONFIG_BASE64 is not set -CONFIG_WHO=y -CONFIG_USERS=y -# CONFIG_CAL is not set -# CONFIG_CATV is not set +CONFIG_FEATURE_CATN=y +# CONFIG_FEATURE_CATV is not set CONFIG_CHGRP=y CONFIG_CHMOD=y CONFIG_CHOWN=y # CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set CONFIG_CHROOT=y # CONFIG_CKSUM is not set +CONFIG_CRC32=y # CONFIG_COMM is not set CONFIG_CP=y # CONFIG_FEATURE_CP_LONG_OPTIONS is not set +# CONFIG_FEATURE_CP_REFLINK is not set CONFIG_CUT=y +CONFIG_FEATURE_CUT_REGEX=y +CONFIG_DATE=y +# CONFIG_FEATURE_DATE_ISOFMT is not set +# CONFIG_FEATURE_DATE_NANO is not set +CONFIG_FEATURE_DATE_COMPAT=y CONFIG_DD=y CONFIG_FEATURE_DD_SIGNAL_HANDLING=y # CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set # CONFIG_FEATURE_DD_IBS_OBS is not set +# CONFIG_FEATURE_DD_STATUS is not set CONFIG_DF=y # CONFIG_FEATURE_DF_FANCY is not set CONFIG_DIRNAME=y @@ -225,39 +233,54 @@ CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y CONFIG_ECHO=y CONFIG_FEATURE_FANCY_ECHO=y CONFIG_ENV=y -CONFIG_FEATURE_ENV_LONG_OPTIONS=y # CONFIG_EXPAND is not set -# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set +# CONFIG_UNEXPAND is not set CONFIG_EXPR=y CONFIG_EXPR_MATH_SUPPORT_64=y +# CONFIG_FACTOR is not set CONFIG_FALSE=y # CONFIG_FOLD is not set -# CONFIG_FSYNC is not set CONFIG_HEAD=y # CONFIG_FEATURE_FANCY_HEAD is not set +# CONFIG_HOSTID is not set +CONFIG_ID=y +CONFIG_GROUPS=y # CONFIG_INSTALL is not set # CONFIG_FEATURE_INSTALL_LONG_OPTIONS is not set +# CONFIG_LINK is not set CONFIG_LN=y CONFIG_LOGNAME=y CONFIG_LS=y CONFIG_FEATURE_LS_FILETYPES=y CONFIG_FEATURE_LS_FOLLOWLINKS=y CONFIG_FEATURE_LS_RECURSIVE=y +CONFIG_FEATURE_LS_WIDTH=y CONFIG_FEATURE_LS_SORTFILES=y CONFIG_FEATURE_LS_TIMESTAMPS=y CONFIG_FEATURE_LS_USERNAME=y CONFIG_FEATURE_LS_COLOR=y # CONFIG_FEATURE_LS_COLOR_IS_DEFAULT is not set CONFIG_MD5SUM=y +CONFIG_SHA1SUM=y +CONFIG_SHA256SUM=y +# CONFIG_SHA512SUM is not set +# CONFIG_SHA3SUM is not set + +# +# Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum +# +CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y CONFIG_MKDIR=y -CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y CONFIG_MKFIFO=y CONFIG_MKNOD=y +CONFIG_MKTEMP=y CONFIG_MV=y -# CONFIG_FEATURE_MV_LONG_OPTIONS is not set # CONFIG_NICE is not set +# CONFIG_NL is not set CONFIG_NOHUP=y +CONFIG_NPROC=y CONFIG_OD=y +# CONFIG_PASTE is not set # CONFIG_PRINTENV is not set CONFIG_PRINTF=y CONFIG_PWD=y @@ -266,40 +289,57 @@ CONFIG_FEATURE_READLINK_FOLLOW=y CONFIG_REALPATH=y CONFIG_RM=y CONFIG_RMDIR=y -# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set CONFIG_SEQ=y -# CONFIG_SHA1SUM is not set -# CONFIG_SHA256SUM is not set -# CONFIG_SHA512SUM is not set -# CONFIG_SHA3SUM is not set +# CONFIG_SHRED is not set +CONFIG_SHUF=y CONFIG_SLEEP=y CONFIG_FEATURE_FANCY_SLEEP=y -# CONFIG_FEATURE_FLOAT_SLEEP is not set CONFIG_SORT=y CONFIG_FEATURE_SORT_BIG=y +# CONFIG_FEATURE_SORT_OPTIMIZE_MEMORY is not set # CONFIG_SPLIT is not set # CONFIG_FEATURE_SPLIT_FANCY is not set CONFIG_STAT=y CONFIG_FEATURE_STAT_FORMAT=y +CONFIG_FEATURE_STAT_FILESYSTEM=y CONFIG_STTY=y # CONFIG_SUM is not set CONFIG_SYNC=y +# CONFIG_FEATURE_SYNC_FANCY is not set +# CONFIG_FSYNC is not set # CONFIG_TAC is not set CONFIG_TAIL=y CONFIG_FEATURE_FANCY_TAIL=y CONFIG_TEE=y # CONFIG_FEATURE_TEE_USE_BLOCK_IO is not set +CONFIG_TEST=y +CONFIG_TEST1=y +CONFIG_TEST2=y +CONFIG_FEATURE_TEST_64=y +# CONFIG_TIMEOUT is not set +CONFIG_TOUCH=y +CONFIG_FEATURE_TOUCH_SUSV3=y +CONFIG_TR=y +CONFIG_FEATURE_TR_CLASSES=y +# CONFIG_FEATURE_TR_EQUIV is not set CONFIG_TRUE=y +# CONFIG_TRUNCATE is not set CONFIG_TTY=y CONFIG_UNAME=y -# CONFIG_UNEXPAND is not set -# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set +CONFIG_UNAME_OSNAME="GNU/Linux" +# CONFIG_BB_ARCH is not set CONFIG_UNIQ=y +CONFIG_UNLINK=y CONFIG_USLEEP=y # CONFIG_UUDECODE is not set +CONFIG_BASE32=y +# CONFIG_BASE64 is not set # CONFIG_UUENCODE is not set CONFIG_WC=y # CONFIG_FEATURE_WC_LARGE is not set +CONFIG_WHO=y +# CONFIG_W is not set +CONFIG_USERS=y CONFIG_WHOAMI=y CONFIG_YES=y @@ -314,64 +354,61 @@ CONFIG_FEATURE_VERBOSE=y # CONFIG_FEATURE_PRESERVE_HARDLINKS is not set # -# Common options for ls, more and telnet -# -CONFIG_FEATURE_AUTOWIDTH=y - -# # Common options for df, du, ls # CONFIG_FEATURE_HUMAN_READABLE=y # -# Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum -# -CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y - -# # Console Utilities # CONFIG_CHVT=y -# CONFIG_FGCONSOLE is not set CONFIG_CLEAR=y CONFIG_DEALLOCVT=y CONFIG_DUMPKMAP=y +# CONFIG_FGCONSOLE is not set # CONFIG_KBD_MODE is not set CONFIG_LOADFONT=y -CONFIG_LOADKMAP=y -CONFIG_OPENVT=y -CONFIG_RESET=y -# CONFIG_RESIZE is not set -# CONFIG_FEATURE_RESIZE_PRINT is not set -CONFIG_SETCONSOLE=y -# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set # CONFIG_SETFONT is not set # CONFIG_FEATURE_SETFONT_TEXTUAL_MAP is not set CONFIG_DEFAULT_SETFONT_DIR="" -# CONFIG_SETKEYCODES is not set -# CONFIG_SETLOGCONS is not set -# CONFIG_SHOWKEY is not set # # Common options for loadfont and setfont # # CONFIG_FEATURE_LOADFONT_PSF2 is not set # CONFIG_FEATURE_LOADFONT_RAW is not set +CONFIG_LOADKMAP=y +CONFIG_OPENVT=y +CONFIG_RESET=y +CONFIG_RESIZE=y +CONFIG_FEATURE_RESIZE_PRINT=y +CONFIG_SETCONSOLE=y +# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set +# CONFIG_SETKEYCODES is not set +# CONFIG_SETLOGCONS is not set +# CONFIG_SHOWKEY is not set # # Debian Utilities # -CONFIG_MKTEMP=y # CONFIG_PIPE_PROGRESS is not set CONFIG_RUN_PARTS=y CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y # CONFIG_FEATURE_RUN_PARTS_FANCY is not set CONFIG_START_STOP_DAEMON=y -CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y +CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y CONFIG_WHICH=y # +# klibc-utils +# +# CONFIG_MINIPS is not set +# CONFIG_NUKE is not set +# CONFIG_RESUME is not set +# CONFIG_RUN_INIT is not set + +# # Editors # CONFIG_AWK=y @@ -388,6 +425,7 @@ CONFIG_VI=y CONFIG_FEATURE_VI_MAX_LEN=1024 CONFIG_FEATURE_VI_8BIT=y CONFIG_FEATURE_VI_COLON=y +CONFIG_FEATURE_VI_COLON_EXPAND=y CONFIG_FEATURE_VI_YANKMARK=y CONFIG_FEATURE_VI_SEARCH=y # CONFIG_FEATURE_VI_REGEX_SEARCH is not set @@ -401,6 +439,7 @@ CONFIG_FEATURE_VI_WIN_RESIZE=y CONFIG_FEATURE_VI_UNDO=y CONFIG_FEATURE_VI_UNDO_QUEUE=y CONFIG_FEATURE_VI_UNDO_QUEUE_MAX=256 +CONFIG_FEATURE_VI_VERBOSE_STATUS=y CONFIG_FEATURE_ALLOW_EXEC=y # @@ -412,6 +451,7 @@ CONFIG_FEATURE_FIND_MTIME=y CONFIG_FEATURE_FIND_MMIN=y CONFIG_FEATURE_FIND_PERM=y CONFIG_FEATURE_FIND_TYPE=y +CONFIG_FEATURE_FIND_EXECUTABLE=y CONFIG_FEATURE_FIND_XDEV=y CONFIG_FEATURE_FIND_MAXDEPTH=y CONFIG_FEATURE_FIND_NEWER=y @@ -425,14 +465,16 @@ CONFIG_FEATURE_FIND_DEPTH=y CONFIG_FEATURE_FIND_PAREN=y CONFIG_FEATURE_FIND_SIZE=y CONFIG_FEATURE_FIND_PRUNE=y +CONFIG_FEATURE_FIND_QUIT=y # CONFIG_FEATURE_FIND_DELETE is not set +CONFIG_FEATURE_FIND_EMPTY=y CONFIG_FEATURE_FIND_PATH=y CONFIG_FEATURE_FIND_REGEX=y # CONFIG_FEATURE_FIND_CONTEXT is not set # CONFIG_FEATURE_FIND_LINKS is not set CONFIG_GREP=y -CONFIG_FEATURE_GREP_EGREP_ALIAS=y -CONFIG_FEATURE_GREP_FGREP_ALIAS=y +CONFIG_EGREP=y +CONFIG_FGREP=y CONFIG_FEATURE_GREP_CONTEXT=y CONFIG_XARGS=y # CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set @@ -440,6 +482,8 @@ CONFIG_XARGS=y # CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT is not set # CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM is not set CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR=y +# CONFIG_FEATURE_XARGS_SUPPORT_PARALLEL is not set +# CONFIG_FEATURE_XARGS_SUPPORT_ARGS_FILE is not set # # Init Utilities @@ -447,60 +491,62 @@ CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR=y # CONFIG_BOOTCHARTD is not set # CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set # CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set -CONFIG_HALT=y +# CONFIG_HALT is not set +# CONFIG_POWEROFF is not set +CONFIG_REBOOT=y +# CONFIG_FEATURE_WAIT_FOR_INIT is not set # CONFIG_FEATURE_CALL_TELINIT is not set CONFIG_TELINIT_PATH="" # CONFIG_INIT is not set +# CONFIG_LINUXRC is not set # CONFIG_FEATURE_USE_INITTAB is not set # CONFIG_FEATURE_KILL_REMOVED is not set CONFIG_FEATURE_KILL_DELAY=0 # CONFIG_FEATURE_INIT_SCTTY is not set # CONFIG_FEATURE_INIT_SYSLOG is not set -# CONFIG_FEATURE_EXTRA_QUIET is not set +# CONFIG_FEATURE_INIT_QUIET is not set # CONFIG_FEATURE_INIT_COREDUMPS is not set -# CONFIG_FEATURE_INITRD is not set CONFIG_INIT_TERMINAL_TYPE="" -CONFIG_MESG=y -# CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP is not set +# CONFIG_FEATURE_INIT_MODIFY_CMDLINE is not set # # Login/Password Management Utilities # -# CONFIG_ADD_SHELL is not set -# CONFIG_REMOVE_SHELL is not set -# CONFIG_FEATURE_SHADOWPASSWDS is not set +CONFIG_FEATURE_SHADOWPASSWDS=y # CONFIG_USE_BB_PWD_GRP is not set # CONFIG_USE_BB_SHADOW is not set CONFIG_USE_BB_CRYPT=y # CONFIG_USE_BB_CRYPT_SHA is not set -# CONFIG_ADDUSER is not set -# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set +# CONFIG_ADD_SHELL is not set +# CONFIG_REMOVE_SHELL is not set +CONFIG_ADDGROUP=y +# CONFIG_FEATURE_ADDUSER_TO_GROUP is not set +CONFIG_ADDUSER=y # CONFIG_FEATURE_CHECK_NAMES is not set CONFIG_LAST_ID=60000 CONFIG_FIRST_SYSTEM_ID=100 CONFIG_LAST_SYSTEM_ID=999 -# CONFIG_ADDGROUP is not set -# CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS is not set -# CONFIG_FEATURE_ADDUSER_TO_GROUP is not set -# CONFIG_DELUSER is not set -# CONFIG_DELGROUP is not set +# CONFIG_CHPASSWD is not set +CONFIG_FEATURE_DEFAULT_PASSWD_ALGO="" +# CONFIG_CRYPTPW is not set +# CONFIG_MKPASSWD is not set +CONFIG_DELUSER=y +CONFIG_DELGROUP=y # CONFIG_FEATURE_DEL_USER_FROM_GROUP is not set -# CONFIG_GETTY is not set -# CONFIG_LOGIN is not set +CONFIG_GETTY=y +CONFIG_LOGIN=y # CONFIG_LOGIN_SESSION_AS_CHILD is not set # CONFIG_LOGIN_SCRIPTS is not set # CONFIG_FEATURE_NOLOGIN is not set # CONFIG_FEATURE_SECURETTY is not set -# CONFIG_PASSWD is not set +CONFIG_PASSWD=y # CONFIG_FEATURE_PASSWD_WEAK_CHECK is not set -# CONFIG_CRYPTPW is not set -# CONFIG_CHPASSWD is not set -CONFIG_FEATURE_DEFAULT_PASSWD_ALGO="" -# CONFIG_SU is not set +CONFIG_SU=y # CONFIG_FEATURE_SU_SYSLOG is not set # CONFIG_FEATURE_SU_CHECKS_SHELLS is not set -# CONFIG_SULOGIN is not set -# CONFIG_VLOCK is not set +# CONFIG_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY is not set +CONFIG_SULOGIN=y +CONFIG_VLOCK=y # # Linux Ext2 FS Progs @@ -513,29 +559,29 @@ CONFIG_FSCK=y # # Linux Module Utilities # -# CONFIG_MODINFO is not set # CONFIG_MODPROBE_SMALL is not set -# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set -# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set +CONFIG_DEPMOD=y CONFIG_INSMOD=y -CONFIG_RMMOD=y CONFIG_LSMOD=y # CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set +# CONFIG_MODINFO is not set CONFIG_MODPROBE=y # CONFIG_FEATURE_MODPROBE_BLACKLIST is not set -CONFIG_DEPMOD=y +CONFIG_RMMOD=y # # Options common to multiple modutils # +CONFIG_FEATURE_CMDLINE_MODULE_OPTIONS=y +# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set # CONFIG_FEATURE_2_4_MODULES is not set -# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set # CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set # CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set # CONFIG_FEATURE_INSMOD_LOADINKMEM is not set # CONFIG_FEATURE_INSMOD_LOAD_MAP is not set # CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set CONFIG_FEATURE_CHECK_TAINTED_MODULE=y +# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set CONFIG_FEATURE_MODUTILS_ALIAS=y CONFIG_FEATURE_MODUTILS_SYMBOLS=y CONFIG_DEFAULT_MODULES_DIR="/lib/modules" @@ -544,26 +590,23 @@ CONFIG_DEFAULT_DEPMOD_FILE="modules.dep" # # Linux System Utilities # -# CONFIG_BLOCKDEV is not set -# CONFIG_FATATTR is not set -CONFIG_FSTRIM=y -# CONFIG_MDEV is not set -# CONFIG_FEATURE_MDEV_CONF is not set -# CONFIG_FEATURE_MDEV_RENAME is not set -# CONFIG_FEATURE_MDEV_RENAME_REGEXP is not set -# CONFIG_FEATURE_MDEV_EXEC is not set -# CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set -# CONFIG_REV is not set # CONFIG_ACPID is not set # CONFIG_FEATURE_ACPID_COMPAT is not set -# CONFIG_BLKID is not set -# CONFIG_FEATURE_BLKID_TYPE is not set +# CONFIG_BLKDISCARD is not set +CONFIG_BLKID=y +CONFIG_FEATURE_BLKID_TYPE=y +# CONFIG_BLOCKDEV is not set +# CONFIG_CAL is not set +# CONFIG_CHRT is not set CONFIG_DMESG=y CONFIG_FEATURE_DMESG_PRETTY=y +# CONFIG_EJECT is not set +# CONFIG_FEATURE_EJECT_SCSI is not set +# CONFIG_FALLOCATE is not set +# CONFIG_FATATTR is not set CONFIG_FBSET=y CONFIG_FEATURE_FBSET_FANCY=y CONFIG_FEATURE_FBSET_READMODE=y -# CONFIG_FDFLUSH is not set # CONFIG_FDFORMAT is not set CONFIG_FDISK=y # CONFIG_FDISK_SUPPORT_LARGE_DISKS is not set @@ -576,26 +619,42 @@ CONFIG_FEATURE_FDISK_WRITABLE=y # CONFIG_FEATURE_FDISK_ADVANCED is not set # CONFIG_FINDFS is not set CONFIG_FLOCK=y +# CONFIG_FDFLUSH is not set # CONFIG_FREERAMDISK is not set # CONFIG_FSCK_MINIX is not set -# CONFIG_MKFS_EXT2 is not set -# CONFIG_MKFS_MINIX is not set -# CONFIG_FEATURE_MINIX2 is not set -# CONFIG_MKFS_REISER is not set -# CONFIG_MKFS_VFAT is not set -# CONFIG_GETOPT is not set -# CONFIG_FEATURE_GETOPT_LONG is not set +# CONFIG_FSFREEZE is not set +CONFIG_FSTRIM=y +CONFIG_GETOPT=y +CONFIG_FEATURE_GETOPT_LONG=y CONFIG_HEXDUMP=y -# CONFIG_FEATURE_HEXDUMP_REVERSE is not set # CONFIG_HD is not set +# CONFIG_XXD is not set CONFIG_HWCLOCK=y -CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y +# CONFIG_IONICE is not set # CONFIG_IPCRM is not set # CONFIG_IPCS is not set +# CONFIG_LAST is not set +# CONFIG_FEATURE_LAST_FANCY is not set CONFIG_LOSETUP=y # CONFIG_LSPCI is not set # CONFIG_LSUSB is not set +# CONFIG_MDEV is not set +# CONFIG_FEATURE_MDEV_CONF is not set +# CONFIG_FEATURE_MDEV_RENAME is not set +# CONFIG_FEATURE_MDEV_RENAME_REGEXP is not set +# CONFIG_FEATURE_MDEV_EXEC is not set +# CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set +# CONFIG_FEATURE_MDEV_DAEMON is not set +CONFIG_MESG=y +# CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP is not set +# CONFIG_MKE2FS is not set +# CONFIG_MKFS_EXT2 is not set +# CONFIG_MKFS_MINIX is not set +# CONFIG_FEATURE_MINIX2 is not set +# CONFIG_MKFS_REISER is not set +# CONFIG_MKDOSFS is not set +# CONFIG_MKFS_VFAT is not set CONFIG_MKSWAP=y # CONFIG_FEATURE_MKSWAP_UUID is not set CONFIG_MORE=y @@ -603,25 +662,47 @@ CONFIG_MOUNT=y # CONFIG_FEATURE_MOUNT_FAKE is not set # CONFIG_FEATURE_MOUNT_VERBOSE is not set # CONFIG_FEATURE_MOUNT_HELPERS is not set -# CONFIG_FEATURE_MOUNT_LABEL is not set -CONFIG_FEATURE_MOUNT_NFS=y +CONFIG_FEATURE_MOUNT_LABEL=y +# CONFIG_FEATURE_MOUNT_NFS is not set # CONFIG_FEATURE_MOUNT_CIFS is not set CONFIG_FEATURE_MOUNT_FLAGS=y CONFIG_FEATURE_MOUNT_FSTAB=y +# CONFIG_FEATURE_MOUNT_OTHERTAB is not set +CONFIG_MOUNTPOINT=y +# CONFIG_NOLOGIN is not set +# CONFIG_NOLOGIN_DEPENDENCIES is not set +# CONFIG_NSENTER is not set CONFIG_PIVOT_ROOT=y CONFIG_RDATE=y # CONFIG_RDEV is not set # CONFIG_READPROFILE is not set +CONFIG_RENICE=y +CONFIG_REV=y # CONFIG_RTCWAKE is not set # CONFIG_SCRIPT is not set # CONFIG_SCRIPTREPLAY is not set # CONFIG_SETARCH is not set -CONFIG_SWAPONOFF=y +# CONFIG_LINUX32 is not set +# CONFIG_LINUX64 is not set +# CONFIG_SETPRIV is not set +# CONFIG_FEATURE_SETPRIV_DUMP is not set +# CONFIG_FEATURE_SETPRIV_CAPABILITIES is not set +# CONFIG_FEATURE_SETPRIV_CAPABILITY_NAMES is not set +CONFIG_SETSID=y +CONFIG_SWAPON=y CONFIG_FEATURE_SWAPON_DISCARD=y CONFIG_FEATURE_SWAPON_PRI=y +CONFIG_SWAPOFF=y +# CONFIG_FEATURE_SWAPONOFF_LABEL is not set CONFIG_SWITCH_ROOT=y +# CONFIG_TASKSET is not set +# CONFIG_FEATURE_TASKSET_FANCY is not set +# CONFIG_FEATURE_TASKSET_CPULIST is not set +# CONFIG_UEVENT is not set CONFIG_UMOUNT=y CONFIG_FEATURE_UMOUNT_ALL=y +# CONFIG_UNSHARE is not set +# CONFIG_WALL is not set # # Common options for mount/umount @@ -629,63 +710,51 @@ CONFIG_FEATURE_UMOUNT_ALL=y CONFIG_FEATURE_MOUNT_LOOP=y CONFIG_FEATURE_MOUNT_LOOP_CREATE=y # CONFIG_FEATURE_MTAB_SUPPORT is not set -# CONFIG_VOLUMEID is not set -# CONFIG_FEATURE_VOLUMEID_BTRFS is not set +CONFIG_VOLUMEID=y + +# +# Filesystem/Volume identification +# +# CONFIG_FEATURE_VOLUMEID_BCACHE is not set +CONFIG_FEATURE_VOLUMEID_BTRFS=y # CONFIG_FEATURE_VOLUMEID_CRAMFS is not set +CONFIG_FEATURE_VOLUMEID_EROFS=y # CONFIG_FEATURE_VOLUMEID_EXFAT is not set -# CONFIG_FEATURE_VOLUMEID_EXT is not set -# CONFIG_FEATURE_VOLUMEID_F2FS is not set -# CONFIG_FEATURE_VOLUMEID_FAT is not set +CONFIG_FEATURE_VOLUMEID_EXT=y +CONFIG_FEATURE_VOLUMEID_F2FS=y +CONFIG_FEATURE_VOLUMEID_FAT=y # CONFIG_FEATURE_VOLUMEID_HFS is not set # CONFIG_FEATURE_VOLUMEID_ISO9660 is not set # CONFIG_FEATURE_VOLUMEID_JFS is not set +# CONFIG_FEATURE_VOLUMEID_LFS is not set # CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set # CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set # CONFIG_FEATURE_VOLUMEID_LUKS is not set +# CONFIG_FEATURE_VOLUMEID_MINIX is not set # CONFIG_FEATURE_VOLUMEID_NILFS is not set # CONFIG_FEATURE_VOLUMEID_NTFS is not set # CONFIG_FEATURE_VOLUMEID_OCFS2 is not set # CONFIG_FEATURE_VOLUMEID_REISERFS is not set # CONFIG_FEATURE_VOLUMEID_ROMFS is not set -# CONFIG_FEATURE_VOLUMEID_SQUASHFS is not set +CONFIG_FEATURE_VOLUMEID_SQUASHFS=y # CONFIG_FEATURE_VOLUMEID_SYSV is not set +# CONFIG_FEATURE_VOLUMEID_UBIFS is not set # CONFIG_FEATURE_VOLUMEID_UDF is not set # CONFIG_FEATURE_VOLUMEID_XFS is not set # # Miscellaneous Utilities # -# CONFIG_CONSPY is not set -# CONFIG_CROND is not set -# CONFIG_FEATURE_CROND_D is not set -# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set -CONFIG_FEATURE_CROND_DIR="" -CONFIG_LESS=y -CONFIG_FEATURE_LESS_MAXLINES=9999999 -CONFIG_FEATURE_LESS_BRACKETS=y -CONFIG_FEATURE_LESS_FLAGS=y -# CONFIG_FEATURE_LESS_MARKS is not set -# CONFIG_FEATURE_LESS_REGEXP is not set -# CONFIG_FEATURE_LESS_WINCH is not set -# CONFIG_FEATURE_LESS_ASK_TERMINAL is not set -# CONFIG_FEATURE_LESS_DASHCMD is not set -# CONFIG_FEATURE_LESS_LINENUMS is not set -# CONFIG_NANDWRITE is not set -# CONFIG_NANDDUMP is not set -CONFIG_RFKILL=y -# CONFIG_SETSERIAL is not set -# CONFIG_TASKSET is not set -# CONFIG_FEATURE_TASKSET_FANCY is not set -# CONFIG_UBIATTACH is not set -# CONFIG_UBIDETACH is not set -# CONFIG_UBIMKVOL is not set -# CONFIG_UBIRMVOL is not set -# CONFIG_UBIRSVOL is not set -# CONFIG_UBIUPDATEVOL is not set -# CONFIG_WALL is not set # CONFIG_ADJTIMEX is not set +CONFIG_ASCII=y # CONFIG_BBCONFIG is not set # CONFIG_FEATURE_COMPRESS_BBCONFIG is not set +# CONFIG_BC is not set +CONFIG_DC=y +# CONFIG_FEATURE_DC_BIG is not set +# CONFIG_FEATURE_DC_LIBM is not set +# CONFIG_FEATURE_BC_INTERACTIVE is not set +# CONFIG_FEATURE_BC_LONG_OPTIONS is not set # CONFIG_BEEP is not set CONFIG_FEATURE_BEEP_FREQ=0 CONFIG_FEATURE_BEEP_LENGTH_MS=0 @@ -697,28 +766,24 @@ CONFIG_FEATURE_BEEP_LENGTH_MS=0 # CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set # CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set # CONFIG_FEATURE_CHAT_CLR_ABORT is not set -# CONFIG_CHRT is not set +# CONFIG_CONSPY is not set +# CONFIG_CROND is not set +# CONFIG_FEATURE_CROND_D is not set +# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set +# CONFIG_FEATURE_CROND_SPECIAL_TIMES is not set +CONFIG_FEATURE_CROND_DIR="" # CONFIG_CRONTAB is not set -CONFIG_DC=y -# CONFIG_FEATURE_DC_LIBM is not set # CONFIG_DEVFSD is not set # CONFIG_DEVFSD_MODLOAD is not set # CONFIG_DEVFSD_FG_NP is not set # CONFIG_DEVFSD_VERBOSE is not set # CONFIG_FEATURE_DEVFS is not set # CONFIG_DEVMEM is not set -# CONFIG_EJECT is not set -# CONFIG_FEATURE_EJECT_SCSI is not set # CONFIG_FBSPLASH is not set -# CONFIG_FLASHCP is not set +# CONFIG_FLASH_ERASEALL is not set # CONFIG_FLASH_LOCK is not set # CONFIG_FLASH_UNLOCK is not set -# CONFIG_FLASH_ERASEALL is not set -# CONFIG_IONICE is not set -# CONFIG_INOTIFYD is not set -# CONFIG_LAST is not set -# CONFIG_FEATURE_LAST_SMALL is not set -# CONFIG_FEATURE_LAST_FANCY is not set +# CONFIG_FLASHCP is not set # CONFIG_HDPARM is not set # CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set # CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set @@ -726,43 +791,67 @@ CONFIG_DC=y # CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set # CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set # CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set +# CONFIG_HEXEDIT is not set +# CONFIG_I2CGET is not set +# CONFIG_I2CSET is not set +# CONFIG_I2CDUMP is not set +# CONFIG_I2CDETECT is not set +# CONFIG_I2CTRANSFER is not set +# CONFIG_INOTIFYD is not set +CONFIG_LESS=y +CONFIG_FEATURE_LESS_MAXLINES=9999999 +CONFIG_FEATURE_LESS_BRACKETS=y +CONFIG_FEATURE_LESS_FLAGS=y +# CONFIG_FEATURE_LESS_TRUNCATE is not set +# CONFIG_FEATURE_LESS_MARKS is not set +# CONFIG_FEATURE_LESS_REGEXP is not set +# CONFIG_FEATURE_LESS_WINCH is not set +# CONFIG_FEATURE_LESS_ASK_TERMINAL is not set +# CONFIG_FEATURE_LESS_DASHCMD is not set +# CONFIG_FEATURE_LESS_LINENUMS is not set +# CONFIG_FEATURE_LESS_RAW is not set +# CONFIG_FEATURE_LESS_ENV is not set +# CONFIG_LSSCSI is not set # CONFIG_MAKEDEVS is not set # CONFIG_FEATURE_MAKEDEVS_LEAF is not set # CONFIG_FEATURE_MAKEDEVS_TABLE is not set # CONFIG_MAN is not set CONFIG_MICROCOM=y -# CONFIG_MOUNTPOINT is not set +# CONFIG_MIM is not set # CONFIG_MT is not set +# CONFIG_NANDWRITE is not set +# CONFIG_NANDDUMP is not set +# CONFIG_PARTPROBE is not set # CONFIG_RAIDAUTORUN is not set # CONFIG_READAHEAD is not set +CONFIG_RFKILL=y # CONFIG_RUNLEVEL is not set # CONFIG_RX is not set -# CONFIG_SETSID is not set +# CONFIG_SETFATTR is not set +# CONFIG_SETSERIAL is not set CONFIG_STRINGS=y CONFIG_TIME=y -# CONFIG_TIMEOUT is not set +CONFIG_TS=y # CONFIG_TTYSIZE is not set +# CONFIG_UBIATTACH is not set +# CONFIG_UBIDETACH is not set +# CONFIG_UBIMKVOL is not set +# CONFIG_UBIRMVOL is not set +# CONFIG_UBIRSVOL is not set +# CONFIG_UBIUPDATEVOL is not set +# CONFIG_UBIRENAME is not set # CONFIG_VOLNAME is not set # CONFIG_WATCHDOG is not set +# CONFIG_FEATURE_WATCHDOG_OPEN_TWICE is not set # # Networking Utilities # -# CONFIG_NAMEIF is not set -# CONFIG_FEATURE_NAMEIF_EXTENDED is not set -# CONFIG_NBDCLIENT is not set -CONFIG_NC=y -# CONFIG_NC_SERVER is not set -# CONFIG_NC_EXTRA is not set -# CONFIG_NC_110_COMPAT is not set -CONFIG_PING=y -CONFIG_PING6=y -CONFIG_FEATURE_FANCY_PING=y -# CONFIG_WHOIS is not set CONFIG_FEATURE_IPV6=y # CONFIG_FEATURE_UNIX_LOCAL is not set CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y # CONFIG_VERBOSE_RESOLUTION_ERRORS is not set +# CONFIG_FEATURE_TLS_SHA1 is not set # CONFIG_ARP is not set # CONFIG_ARPING is not set # CONFIG_BRCTL is not set @@ -770,15 +859,15 @@ CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y # CONFIG_FEATURE_BRCTL_SHOW is not set # CONFIG_DNSD is not set # CONFIG_ETHER_WAKE is not set -# CONFIG_FAKEIDENTD is not set # CONFIG_FTPD is not set -# CONFIG_FEATURE_FTP_WRITE is not set +# CONFIG_FEATURE_FTPD_WRITE is not set # CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST is not set -# CONFIG_FEATURE_FTP_AUTHENTICATION is not set +# CONFIG_FEATURE_FTPD_AUTHENTICATION is not set # CONFIG_FTPGET is not set # CONFIG_FTPPUT is not set # CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set CONFIG_HOSTNAME=y +CONFIG_DNSDOMAINNAME=y # CONFIG_HTTPD is not set # CONFIG_FEATURE_HTTPD_RANGES is not set # CONFIG_FEATURE_HTTPD_SETUID is not set @@ -791,6 +880,10 @@ CONFIG_HOSTNAME=y # CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set # CONFIG_FEATURE_HTTPD_PROXY is not set # CONFIG_FEATURE_HTTPD_GZIP is not set +# CONFIG_FEATURE_HTTPD_ETAG is not set +# CONFIG_FEATURE_HTTPD_LAST_MODIFIED is not set +# CONFIG_FEATURE_HTTPD_DATE is not set +# CONFIG_FEATURE_HTTPD_ACL_IP is not set CONFIG_IFCONFIG=y CONFIG_FEATURE_IFCONFIG_STATUS=y # CONFIG_FEATURE_IFCONFIG_SLIP is not set @@ -799,11 +892,10 @@ CONFIG_FEATURE_IFCONFIG_HW=y # CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set # CONFIG_IFENSLAVE is not set # CONFIG_IFPLUGD is not set -CONFIG_IFUPDOWN=y +CONFIG_IFUP=y +CONFIG_IFDOWN=y CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" -# CONFIG_FEATURE_IFUPDOWN_IP is not set -# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set -CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y +CONFIG_FEATURE_IFUPDOWN_IP=y CONFIG_FEATURE_IFUPDOWN_IPV4=y CONFIG_FEATURE_IFUPDOWN_IPV6=y CONFIG_FEATURE_IFUPDOWN_MAPPING=y @@ -816,81 +908,111 @@ CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y # CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set # CONFIG_FEATURE_INETD_RPC is not set CONFIG_IP=y +# CONFIG_IPADDR is not set +# CONFIG_IPLINK is not set +# CONFIG_IPROUTE is not set +# CONFIG_IPTUNNEL is not set +# CONFIG_IPRULE is not set +# CONFIG_IPNEIGH is not set CONFIG_FEATURE_IP_ADDRESS=y CONFIG_FEATURE_IP_LINK=y CONFIG_FEATURE_IP_ROUTE=y +CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2" CONFIG_FEATURE_IP_TUNNEL=y # CONFIG_FEATURE_IP_RULE is not set -# CONFIG_FEATURE_IP_SHORT_FORMS is not set +# CONFIG_FEATURE_IP_NEIGH is not set # CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set -# CONFIG_IPADDR is not set -# CONFIG_IPLINK is not set -# CONFIG_IPROUTE is not set -# CONFIG_IPTUNNEL is not set -# CONFIG_IPRULE is not set # CONFIG_IPCALC is not set -# CONFIG_FEATURE_IPCALC_FANCY is not set # CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set +# CONFIG_FEATURE_IPCALC_FANCY is not set +# CONFIG_FAKEIDENTD is not set +# CONFIG_NAMEIF is not set +# CONFIG_FEATURE_NAMEIF_EXTENDED is not set +# CONFIG_NBDCLIENT is not set +CONFIG_NC=y +# CONFIG_NETCAT is not set +# CONFIG_NC_SERVER is not set +# CONFIG_NC_EXTRA is not set +# CONFIG_NC_110_COMPAT is not set CONFIG_NETSTAT=y # CONFIG_FEATURE_NETSTAT_WIDE is not set # CONFIG_FEATURE_NETSTAT_PRG is not set CONFIG_NSLOOKUP=y +# CONFIG_FEATURE_NSLOOKUP_BIG is not set +# CONFIG_FEATURE_NSLOOKUP_LONG_OPTIONS is not set # CONFIG_NTPD is not set # CONFIG_FEATURE_NTPD_SERVER is not set # CONFIG_FEATURE_NTPD_CONF is not set +# CONFIG_FEATURE_NTP_AUTH is not set +CONFIG_PING=y +CONFIG_PING6=y +CONFIG_FEATURE_FANCY_PING=y # CONFIG_PSCAN is not set CONFIG_ROUTE=y # CONFIG_SLATTACH is not set +# CONFIG_SSL_CLIENT is not set +# CONFIG_TC is not set +# CONFIG_FEATURE_TC_INGRESS is not set # CONFIG_TCPSVD is not set +# CONFIG_UDPSVD is not set CONFIG_TELNET=y # CONFIG_FEATURE_TELNET_TTYPE is not set CONFIG_FEATURE_TELNET_AUTOLOGIN=y +CONFIG_FEATURE_TELNET_WIDTH=y # CONFIG_TELNETD is not set # CONFIG_FEATURE_TELNETD_STANDALONE is not set # CONFIG_FEATURE_TELNETD_INETD_WAIT is not set CONFIG_TFTP=y +# CONFIG_FEATURE_TFTP_PROGRESS_BAR is not set +CONFIG_FEATURE_TFTP_HPA_COMPAT=y # CONFIG_TFTPD is not set - -# -# Common options for tftp/tftpd -# CONFIG_FEATURE_TFTP_GET=y CONFIG_FEATURE_TFTP_PUT=y # CONFIG_FEATURE_TFTP_BLOCKSIZE is not set -# CONFIG_FEATURE_TFTP_PROGRESS_BAR is not set # CONFIG_TFTP_DEBUG is not set +CONFIG_TLS=y CONFIG_TRACEROUTE=y # CONFIG_TRACEROUTE6 is not set # CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set -# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set # CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set # CONFIG_TUNCTL is not set # CONFIG_FEATURE_TUNCTL_UG is not set -# CONFIG_UDHCPC6 is not set +# CONFIG_VCONFIG is not set +CONFIG_WGET=y +CONFIG_FEATURE_WGET_LONG_OPTIONS=y +CONFIG_FEATURE_WGET_STATUSBAR=y +CONFIG_FEATURE_WGET_FTP=y +CONFIG_FEATURE_WGET_AUTHENTICATION=y +CONFIG_FEATURE_WGET_TIMEOUT=y +CONFIG_FEATURE_WGET_HTTPS=y +# CONFIG_FEATURE_WGET_OPENSSL is not set +# CONFIG_WHOIS is not set +# CONFIG_ZCIP is not set CONFIG_UDHCPD=y -# CONFIG_DHCPRELAY is not set -CONFIG_DUMPLEASES=y -# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set # CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set +# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set CONFIG_DHCPD_LEASES_FILE="/var/lib/misc/udhcpd.leases" +CONFIG_DUMPLEASES=y +# CONFIG_DHCPRELAY is not set CONFIG_UDHCPC=y CONFIG_FEATURE_UDHCPC_ARPING=y CONFIG_FEATURE_UDHCPC_SANITIZEOPT=y +CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script" +# CONFIG_UDHCPC6 is not set +# CONFIG_FEATURE_UDHCPC6_RFC3646 is not set +# CONFIG_FEATURE_UDHCPC6_RFC4704 is not set +# CONFIG_FEATURE_UDHCPC6_RFC4833 is not set +# CONFIG_FEATURE_UDHCPC6_RFC5970 is not set + +# +# Common options for DHCP applets +# # CONFIG_FEATURE_UDHCP_PORT is not set CONFIG_UDHCP_DEBUG=0 -# CONFIG_FEATURE_UDHCP_RFC3397 is not set -# CONFIG_FEATURE_UDHCP_8021Q is not set -CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script" CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80 -CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n" -# CONFIG_UDPSVD is not set -# CONFIG_VCONFIG is not set -CONFIG_WGET=y -CONFIG_FEATURE_WGET_STATUSBAR=y -CONFIG_FEATURE_WGET_AUTHENTICATION=y -CONFIG_FEATURE_WGET_LONG_OPTIONS=y -CONFIG_FEATURE_WGET_TIMEOUT=y -# CONFIG_ZCIP is not set +CONFIG_FEATURE_UDHCP_RFC3397=y +# CONFIG_FEATURE_UDHCP_8021Q is not set +CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -b" # # Print Utilities @@ -903,26 +1025,45 @@ CONFIG_FEATURE_WGET_TIMEOUT=y # Mail Utilities # # CONFIG_MAKEMIME is not set -CONFIG_FEATURE_MIME_CHARSET="" # CONFIG_POPMAILDIR is not set # CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set # CONFIG_REFORMIME is not set # CONFIG_FEATURE_REFORMIME_COMPAT is not set # CONFIG_SENDMAIL is not set +CONFIG_FEATURE_MIME_CHARSET="" # # Process Utilities # +CONFIG_FREE=y +CONFIG_FUSER=y # CONFIG_IOSTAT is not set +CONFIG_KILL=y +CONFIG_KILLALL=y +# CONFIG_KILLALL5 is not set # CONFIG_LSOF is not set # CONFIG_MPSTAT is not set # CONFIG_NMETER is not set +CONFIG_PGREP=y +# CONFIG_PKILL is not set +CONFIG_PIDOF=y +# CONFIG_FEATURE_PIDOF_SINGLE is not set +# CONFIG_FEATURE_PIDOF_OMIT is not set # CONFIG_PMAP is not set # CONFIG_POWERTOP is not set +# CONFIG_FEATURE_POWERTOP_INTERACTIVE is not set +CONFIG_PS=y +CONFIG_FEATURE_PS_WIDE=y +CONFIG_FEATURE_PS_LONG=y +# CONFIG_FEATURE_PS_TIME is not set +# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set +# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set # CONFIG_PSTREE is not set # CONFIG_PWDX is not set # CONFIG_SMEMCAP is not set +CONFIG_BB_SYSCTL=y CONFIG_TOP=y +# CONFIG_FEATURE_TOP_INTERACTIVE is not set CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y # CONFIG_FEATURE_TOP_SMP_CPU is not set @@ -931,80 +1072,74 @@ CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y # CONFIG_FEATURE_TOPMEM is not set CONFIG_UPTIME=y # CONFIG_FEATURE_UPTIME_UTMP_SUPPORT is not set -CONFIG_FREE=y -CONFIG_FUSER=y -CONFIG_KILL=y -CONFIG_KILLALL=y -# CONFIG_KILLALL5 is not set -# CONFIG_PGREP is not set -CONFIG_PIDOF=y -# CONFIG_FEATURE_PIDOF_SINGLE is not set -# CONFIG_FEATURE_PIDOF_OMIT is not set -# CONFIG_PKILL is not set -CONFIG_PS=y -CONFIG_FEATURE_PS_WIDE=y -CONFIG_FEATURE_PS_LONG=y -# CONFIG_FEATURE_PS_TIME is not set -# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set -# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set -CONFIG_RENICE=y -CONFIG_BB_SYSCTL=y -# CONFIG_FEATURE_SHOW_THREADS is not set CONFIG_WATCH=y +# CONFIG_FEATURE_SHOW_THREADS is not set # # Runit Utilities # +# CONFIG_CHPST is not set +# CONFIG_SETUIDGID is not set +# CONFIG_ENVUIDGID is not set +# CONFIG_ENVDIR is not set +# CONFIG_SOFTLIMIT is not set # CONFIG_RUNSV is not set # CONFIG_RUNSVDIR is not set # CONFIG_FEATURE_RUNSVDIR_LOG is not set # CONFIG_SV is not set CONFIG_SV_DEFAULT_SERVICE_DIR="" +# CONFIG_SVC is not set +# CONFIG_SVOK is not set # CONFIG_SVLOGD is not set -# CONFIG_CHPST is not set -# CONFIG_SETUIDGID is not set -# CONFIG_ENVUIDGID is not set -# CONFIG_ENVDIR is not set -# CONFIG_SOFTLIMIT is not set # CONFIG_CHCON is not set -# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set # CONFIG_GETENFORCE is not set # CONFIG_GETSEBOOL is not set # CONFIG_LOAD_POLICY is not set # CONFIG_MATCHPATHCON is not set -# CONFIG_RESTORECON is not set # CONFIG_RUNCON is not set -# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set # CONFIG_SELINUXENABLED is not set +# CONFIG_SESTATUS is not set # CONFIG_SETENFORCE is not set # CONFIG_SETFILES is not set # CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set +# CONFIG_RESTORECON is not set # CONFIG_SETSEBOOL is not set -# CONFIG_SESTATUS is not set # # Shells # +CONFIG_SH_IS_ASH=y +# CONFIG_SH_IS_HUSH is not set +# CONFIG_SH_IS_NONE is not set +# CONFIG_BASH_IS_ASH is not set +# CONFIG_BASH_IS_HUSH is not set +CONFIG_BASH_IS_NONE=y +CONFIG_SHELL_ASH=y CONFIG_ASH=y +CONFIG_ASH_OPTIMIZE_FOR_SIZE=y +CONFIG_ASH_INTERNAL_GLOB=y CONFIG_ASH_BASH_COMPAT=y -# CONFIG_ASH_IDLE_TIMEOUT is not set +# CONFIG_ASH_BASH_SOURCE_CURDIR is not set +CONFIG_ASH_BASH_NOT_FOUND_HOOK=y CONFIG_ASH_JOB_CONTROL=y CONFIG_ASH_ALIAS=y -CONFIG_ASH_GETOPTS=y -CONFIG_ASH_BUILTIN_ECHO=y -CONFIG_ASH_BUILTIN_PRINTF=y -CONFIG_ASH_BUILTIN_TEST=y -CONFIG_ASH_HELP=y -# CONFIG_ASH_CMDCMD is not set -# CONFIG_ASH_MAIL is not set -CONFIG_ASH_OPTIMIZE_FOR_SIZE=y # CONFIG_ASH_RANDOM_SUPPORT is not set CONFIG_ASH_EXPAND_PRMT=y +# CONFIG_ASH_IDLE_TIMEOUT is not set +# CONFIG_ASH_MAIL is not set +CONFIG_ASH_ECHO=y +CONFIG_ASH_PRINTF=y +CONFIG_ASH_TEST=y +CONFIG_ASH_HELP=y +CONFIG_ASH_GETOPTS=y +CONFIG_ASH_CMDCMD=y # CONFIG_CTTYHACK is not set # CONFIG_HUSH is not set +# CONFIG_SHELL_HUSH is not set # CONFIG_HUSH_BASH_COMPAT is not set # CONFIG_HUSH_BRACE_EXPANSION is not set -# CONFIG_HUSH_HELP is not set +# CONFIG_HUSH_LINENO_VAR is not set +# CONFIG_HUSH_BASH_SOURCE_CURDIR is not set # CONFIG_HUSH_INTERACTIVE is not set # CONFIG_HUSH_SAVEHISTORY is not set # CONFIG_HUSH_JOB is not set @@ -1015,40 +1150,60 @@ CONFIG_ASH_EXPAND_PRMT=y # CONFIG_HUSH_FUNCTIONS is not set # CONFIG_HUSH_LOCAL is not set # CONFIG_HUSH_RANDOM_SUPPORT is not set -# CONFIG_HUSH_EXPORT_N is not set # CONFIG_HUSH_MODE_X is not set -# CONFIG_MSH is not set -CONFIG_FEATURE_SH_IS_ASH=y -# CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_NONE is not set -# CONFIG_FEATURE_BASH_IS_ASH is not set -# CONFIG_FEATURE_BASH_IS_HUSH is not set -CONFIG_FEATURE_BASH_IS_NONE=y -CONFIG_SH_MATH_SUPPORT=y -# CONFIG_SH_MATH_SUPPORT_64 is not set +# CONFIG_HUSH_ECHO is not set +# CONFIG_HUSH_PRINTF is not set +# CONFIG_HUSH_TEST is not set +# CONFIG_HUSH_HELP is not set +# CONFIG_HUSH_EXPORT is not set +# CONFIG_HUSH_EXPORT_N is not set +# CONFIG_HUSH_READONLY is not set +# CONFIG_HUSH_KILL is not set +# CONFIG_HUSH_WAIT is not set +# CONFIG_HUSH_COMMAND is not set +# CONFIG_HUSH_TRAP is not set +# CONFIG_HUSH_TYPE is not set +# CONFIG_HUSH_TIMES is not set +# CONFIG_HUSH_READ is not set +# CONFIG_HUSH_SET is not set +# CONFIG_HUSH_UNSET is not set +# CONFIG_HUSH_ULIMIT is not set +# CONFIG_HUSH_UMASK is not set +# CONFIG_HUSH_GETOPTS is not set +# CONFIG_HUSH_MEMLEAK is not set + +# +# Options common to all shells +# +CONFIG_FEATURE_SH_MATH=y +# CONFIG_FEATURE_SH_MATH_64 is not set +CONFIG_FEATURE_SH_MATH_BASE=y CONFIG_FEATURE_SH_EXTRA_QUIET=y # CONFIG_FEATURE_SH_STANDALONE is not set # CONFIG_FEATURE_SH_NOFORK is not set +# CONFIG_FEATURE_SH_READ_FRAC is not set CONFIG_FEATURE_SH_HISTFILESIZE=y +# CONFIG_FEATURE_SH_EMBEDDED_SCRIPTS is not set # # System Logging Utilities # +CONFIG_KLOGD=y + +# +# klogd should not be used together with syslog to kernel printk buffer +# +CONFIG_FEATURE_KLOGD_KLOGCTL=y +CONFIG_LOGGER=y +CONFIG_LOGREAD=y +CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y CONFIG_SYSLOGD=y CONFIG_FEATURE_ROTATE_LOGFILE=y CONFIG_FEATURE_REMOTE_LOG=y CONFIG_FEATURE_SYSLOGD_DUP=y CONFIG_FEATURE_SYSLOGD_CFG=y +# CONFIG_FEATURE_SYSLOGD_PRECISE_TIMESTAMPS is not set CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256 CONFIG_FEATURE_IPC_SYSLOG=y CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=64 -CONFIG_LOGREAD=y -CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y CONFIG_FEATURE_KMSG_SYSLOG=y -CONFIG_KLOGD=y - -# -# klogd should not be used together with syslog to kernel printk buffer -# -CONFIG_FEATURE_KLOGD_KLOGCTL=y -CONFIG_LOGGER=y diff --git a/meta/recipes-core/busybox/busybox/fail_on_no_media.patch b/meta/recipes-core/busybox/busybox/fail_on_no_media.patch index 6745f169fe..820acc2684 100644 --- a/meta/recipes-core/busybox/busybox/fail_on_no_media.patch +++ b/meta/recipes-core/busybox/busybox/fail_on_no_media.patch @@ -1,4 +1,5 @@ -Upstream-Status: Pending +Upstream-Status: Denied +[https://www.mail-archive.com/busybox@busybox.net/msg22354.html] The current behaviour of busybox is to try all fstype when automounting even when no media exists. The util-linux mount command bails when no diff --git a/meta/recipes-core/busybox/busybox/get_header_tar.patch b/meta/recipes-core/busybox/busybox/get_header_tar.patch deleted file mode 100644 index 0e528ff91f..0000000000 --- a/meta/recipes-core/busybox/busybox/get_header_tar.patch +++ /dev/null @@ -1,22 +0,0 @@ -Upstream-Status: Pending - -# copy commit message from OE as the patch comment: -# commit 5a0e1d473ca7aca5ffefffe9a2ec44ae7a1f35bc -# Author: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> -# Date: Wed Feb 11 22:40:21 2009 +0100 -# -# busybox: fix tar problem with filenames that are exactly 100 bytes -# -# above comment added by Kevin Tian <kevin.tian@intel.com>, 2010-07-06 - ---- busybox-1.13.2/archival/libarchive/get_header_tar.c.orig 2008-11-09 18:28:02.000000000 +0100 -+++ busybox-1.13.2/archival/libarchive/get_header_tar.c 2009-02-11 22:34:52.000000000 +0100 -@@ -252,6 +252,8 @@ - file_header->name = concat_path_file(tar.prefix, tar.name); - } else - file_header->name = xstrdup(tar.name); -+ if (strlen(file_header->name) > 100) -+ file_header->name[100] = 0; - } - - /* Set bits 12-15 of the files mode */ diff --git a/meta/recipes-core/busybox/busybox/getopts.cfg b/meta/recipes-core/busybox/busybox/getopts.cfg new file mode 100644 index 0000000000..8db0a4a8f2 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/getopts.cfg @@ -0,0 +1,3 @@ +CONFIG_GETOPT=y +CONFIG_LONG_OPTS=y +CONFIG_FEATURE_GETOPT_LONG=y diff --git a/meta/recipes-core/busybox/busybox/init.cfg b/meta/recipes-core/busybox/busybox/init.cfg new file mode 100644 index 0000000000..e96700682a --- /dev/null +++ b/meta/recipes-core/busybox/busybox/init.cfg @@ -0,0 +1,8 @@ +CONFIG_INIT=y +CONFIG_RUNLEVEL=y +CONFIG_FEATURE_USE_INITTAB=y +CONFIG_HALT=y +CONFIG_POWEROFF=y +CONFIG_FEATURE_KILL_DELAY=0 +CONFIG_TELINIT_PATH="" +CONFIG_INIT_TERMINAL_TYPE="" diff --git a/meta/recipes-core/busybox/busybox/longopts.cfg b/meta/recipes-core/busybox/busybox/longopts.cfg new file mode 100644 index 0000000000..dcfab99919 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/longopts.cfg @@ -0,0 +1,15 @@ +CONFIG_FEATURE_GUNZIP_LONG_OPTIONS=y +CONFIG_FEATURE_GZIP_LONG_OPTIONS=y +CONFIG_FEATURE_TAR_LONG_OPTIONS=y +CONFIG_FEATURE_CHOWN_LONG_OPTIONS=y +CONFIG_FEATURE_CP_LONG_OPTIONS=y +CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y +CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y +CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y +CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y +CONFIG_FEATURE_DIFF_LONG_OPTIONS=y +CONFIG_FEATURE_BC_LONG_OPTIONS=y +CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y +CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y +CONFIG_FEATURE_NSLOOKUP_LONG_OPTIONS=y +CONFIG_FEATURE_WGET_LONG_OPTIONS=y diff --git a/meta/recipes-core/busybox/busybox/makefile-libbb-race.patch b/meta/recipes-core/busybox/busybox/makefile-libbb-race.patch new file mode 100644 index 0000000000..97278ab973 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/makefile-libbb-race.patch @@ -0,0 +1,34 @@ +There is a potential race when building libbb, as some header files +needed by libbb are not generated yet (or are being modified) at the time +libbb is compiled. +This patch avoids this scenario by building libbb as the last directory. + +Upstream-Status: Submitted +Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> + +Index: busybox-1.24.1/Makefile +=================================================================== +diff --git a/Makefile b/Makefile +index 5cfc763..69f3831 100644 +--- a/Makefile ++++ b/Makefile +@@ -738,9 +738,18 @@ $(sort $(busybox-all)): $(busybox-dirs) ; + # Error messages still appears in the original language + + PHONY += $(busybox-dirs) +-$(busybox-dirs): prepare scripts ++ ++libbb-dir = $(filter libbb,$(busybox-dirs)) ++busybox-dirs1 = $(filter-out libbb,$(busybox-dirs)) ++ ++$(busybox-dirs1): prepare scripts + $(Q)$(MAKE) $(build)=$@ + ++ifneq ($(libbb-dir),) ++$(libbb-dir): | $(busybox-dirs1) ++ $(Q)$(MAKE) $(build)=$@ ++endif ++ + # Build the kernel release string + # The KERNELRELEASE is stored in a file named .kernelrelease + # to be used when executing for example make install or make modules_install diff --git a/meta/recipes-core/busybox/busybox/mdev.cfg b/meta/recipes-core/busybox/busybox/mdev.cfg new file mode 100644 index 0000000000..143e6097cb --- /dev/null +++ b/meta/recipes-core/busybox/busybox/mdev.cfg @@ -0,0 +1,13 @@ +CONFIG_MDEV=y +CONFIG_FEATURE_MDEV_CONF=y +CONFIG_FEATURE_MDEV_RENAME=y +CONFIG_FEATURE_MDEV_RENAME_REGEXP=y +CONFIG_FEATURE_MDEV_EXEC=y +CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y + +CONFIG_SETSID=y +CONFIG_CTTYHACK=y + +CONFIG_FEATURE_SHADOWPASSWDS=y +CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y +CONFIG_FEATURE_MDEV_DAEMON=y diff --git a/meta/recipes-core/busybox/busybox/mount-via-label.cfg b/meta/recipes-core/busybox/busybox/mount-via-label.cfg index 2fe7ab2e5f..5a285de7cd 100644 --- a/meta/recipes-core/busybox/busybox/mount-via-label.cfg +++ b/meta/recipes-core/busybox/busybox/mount-via-label.cfg @@ -1,9 +1,11 @@ CONFIG_BLKID=y CONFIG_FEATURE_BLKID_TYPE=y CONFIG_FEATURE_MOUNT_LABEL=y +CONFIG_FEATURE_SWAPONOFF_LABEL=y CONFIG_VOLUMEID=y CONFIG_FEATURE_VOLUMEID_BTRFS=y CONFIG_FEATURE_VOLUMEID_EXT=y CONFIG_FEATURE_VOLUMEID_F2FS=y CONFIG_FEATURE_VOLUMEID_FAT=y CONFIG_FEATURE_VOLUMEID_SQUASHFS=y +CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y diff --git a/meta/recipes-core/busybox/busybox/musl.cfg b/meta/recipes-core/busybox/busybox/musl.cfg new file mode 100644 index 0000000000..6fffc91098 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/musl.cfg @@ -0,0 +1,11 @@ +# CONFIG_EXTRA_COMPAT is not set +# CONFIG_SELINUX is not set +# CONFIG_FEATURE_HAVE_RPC is not set +# CONFIG_WERROR is not set +# CONFIG_FEATURE_VI_REGEX_SEARCH is not set +# CONFIG_PAM is not set +# CONFIG_FEATURE_INETD_RPC is not set +# CONFIG_SELINUXENABLED is not set +# CONFIG_FEATURE_MOUNT_NFS is not set +# CONFIG_FEATURE_UTMP is not set + diff --git a/meta/recipes-core/busybox/busybox/pgrep.cfg b/meta/recipes-core/busybox/busybox/pgrep.cfg new file mode 100644 index 0000000000..775e487d60 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/pgrep.cfg @@ -0,0 +1 @@ +CONFIG_PGREP=y diff --git a/meta/recipes-core/busybox/busybox/resize.cfg b/meta/recipes-core/busybox/busybox/resize.cfg new file mode 100644 index 0000000000..a1d9c95b2f --- /dev/null +++ b/meta/recipes-core/busybox/busybox/resize.cfg @@ -0,0 +1,2 @@ +CONFIG_RESIZE=y +CONFIG_FEATURE_RESIZE_PRINT=y diff --git a/meta/recipes-core/busybox/busybox/rev.cfg b/meta/recipes-core/busybox/busybox/rev.cfg new file mode 100644 index 0000000000..da008c30cd --- /dev/null +++ b/meta/recipes-core/busybox/busybox/rev.cfg @@ -0,0 +1 @@ +CONFIG_REV=y diff --git a/meta/recipes-core/busybox/busybox/syslog.cfg b/meta/recipes-core/busybox/busybox/syslog.cfg new file mode 100644 index 0000000000..e2425ed80e --- /dev/null +++ b/meta/recipes-core/busybox/busybox/syslog.cfg @@ -0,0 +1,11 @@ +CONFIG_SYSLOGD=y +CONFIG_FEATURE_ROTATE_LOGFILE=y +CONFIG_FEATURE_REMOTE_LOG=y +CONFIG_FEATURE_SYSLOGD_DUP=y +CONFIG_FEATURE_SYSLOGD_CFG=y +CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256 +CONFIG_FEATURE_IPC_SYSLOG=y +CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=64 +CONFIG_LOGREAD=y +CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y +CONFIG_FEATURE_KMSG_SYSLOG=y diff --git a/meta/recipes-core/busybox/busybox/unicode.cfg b/meta/recipes-core/busybox/busybox/unicode.cfg new file mode 100644 index 0000000000..ecb5a64f27 --- /dev/null +++ b/meta/recipes-core/busybox/busybox/unicode.cfg @@ -0,0 +1,10 @@ +CONFIG_UNICODE_SUPPORT=y +# CONFIG_UNICODE_USING_LOCALE is not set +CONFIG_FEATURE_CHECK_UNICODE_IN_ENV=y +CONFIG_SUBST_WCHAR=63 +CONFIG_LAST_SUPPORTED_WCHAR=767 +CONFIG_UNICODE_COMBINING_WCHARS=y +CONFIG_UNICODE_WIDE_WCHARS=y +# CONFIG_UNICODE_BIDI_SUPPORT is not set +# CONFIG_UNICODE_NEUTRAL_TABLE is not set +# CONFIG_UNICODE_PRESERVE_BROKEN is not set diff --git a/meta/recipes-core/busybox/busybox_1.23.2.bb b/meta/recipes-core/busybox/busybox_1.23.2.bb deleted file mode 100644 index 8a4bae692a..0000000000 --- a/meta/recipes-core/busybox/busybox_1.23.2.bb +++ /dev/null @@ -1,49 +0,0 @@ -require busybox.inc - -SRC_URI = "http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \ - file://get_header_tar.patch \ - file://busybox-appletlib-dependency.patch \ - file://busybox-udhcpc-no_deconfig.patch \ - file://find-touchscreen.sh \ - file://busybox-cron \ - file://busybox-httpd \ - file://busybox-udhcpd \ - file://default.script \ - file://simple.script \ - file://hwclock.sh \ - file://mount.busybox \ - file://syslog \ - file://syslog-startup.conf \ - file://syslog.conf \ - file://busybox-syslog.default \ - file://mdev \ - file://mdev.conf \ - file://mdev-mount.sh \ - file://umount.busybox \ - file://defconfig \ - file://busybox-syslog.service.in \ - file://busybox-klogd.service.in \ - file://fail_on_no_media.patch \ - file://run-ptest \ - file://inetd.conf \ - file://inetd \ - file://login-utilities.cfg \ - file://recognize_connmand.patch \ - file://busybox-cross-menuconfig.patch \ - file://0001-ifconfig-fix-double-free-fatal-error-in-INET_sprint.patch \ - file://0001-chown-fix-help-text.patch \ - file://mount-via-label.cfg \ - file://sha1sum.cfg \ - file://sha256sum.cfg \ -" - -SRC_URI[tarball.md5sum] = "7925683d7dd105aabe9b6b618d48cc73" -SRC_URI[tarball.sha256sum] = "05a6f9e21aad8c098e388ae77de7b2361941afa7157ef74216703395b14e319a" - -EXTRA_OEMAKE += "V=1 ARCH=${TARGET_ARCH} CROSS_COMPILE=${TARGET_PREFIX} SKIP_STRIP=y" - -do_install_ptest () { - cp -r ${B}/testsuite ${D}${PTEST_PATH}/ - cp ${B}/.config ${D}${PTEST_PATH}/ - ln -s /bin/busybox ${D}${PTEST_PATH}/busybox -} diff --git a/meta/recipes-core/busybox/busybox_1.34.1.bb b/meta/recipes-core/busybox/busybox_1.34.1.bb new file mode 100644 index 0000000000..6aed0f0476 --- /dev/null +++ b/meta/recipes-core/busybox/busybox_1.34.1.bb @@ -0,0 +1,54 @@ +require busybox.inc + +SRC_URI = "https://busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \ + file://busybox-udhcpc-no_deconfig.patch \ + file://find-touchscreen.sh \ + file://busybox-cron \ + file://busybox-httpd \ + file://busybox-udhcpd \ + file://default.script \ + file://simple.script \ + file://hwclock.sh \ + file://syslog \ + file://syslog-startup.conf \ + file://syslog.conf \ + file://busybox-syslog.default \ + file://mdev \ + file://mdev.conf \ + file://mdev-mount.sh \ + file://defconfig \ + file://busybox-syslog.service.in \ + file://busybox-klogd.service.in \ + file://fail_on_no_media.patch \ + file://run-ptest \ + file://inetd.conf \ + file://inetd \ + file://login-utilities.cfg \ + file://recognize_connmand.patch \ + file://busybox-cross-menuconfig.patch \ + file://0001-Use-CC-when-linking-instead-of-LD-and-use-CFLAGS-and.patch \ + file://mount-via-label.cfg \ + file://sha1sum.cfg \ + file://sha256sum.cfg \ + file://getopts.cfg \ + file://longopts.cfg \ + file://resize.cfg \ + ${@["", "file://init.cfg"][(d.getVar('VIRTUAL-RUNTIME_init_manager') == 'busybox')]} \ + ${@["", "file://rcS.default"][(d.getVar('VIRTUAL-RUNTIME_init_manager') == 'busybox')]} \ + ${@["", "file://mdev.cfg"][(d.getVar('VIRTUAL-RUNTIME_dev_manager') == 'busybox-mdev')]} \ + file://syslog.cfg \ + file://unicode.cfg \ + file://rev.cfg \ + file://pgrep.cfg \ + file://rcS \ + file://rcK \ + file://makefile-libbb-race.patch \ + file://0001-testsuite-check-uudecode-before-using-it.patch \ + file://0001-testsuite-use-www.example.org-for-wget-test-cases.patch \ + file://0001-du-l-works-fix-to-use-145-instead-of-144.patch \ + file://0001-sysctl-ignore-EIO-of-stable_secret-below-proc-sys-ne.patch \ + file://0001-mktemp-add-tmpdir-option.patch \ + " +SRC_URI:append:libc-musl = " file://musl.cfg " + +SRC_URI[tarball.sha256sum] = "415fbd89e5344c96acf449d94a6f956dbed62e18e835fc83e064db33a34bd549" diff --git a/meta/recipes-core/busybox/busybox_git.bb b/meta/recipes-core/busybox/busybox_git.bb deleted file mode 100644 index ade72f4b71..0000000000 --- a/meta/recipes-core/busybox/busybox_git.bb +++ /dev/null @@ -1,54 +0,0 @@ -require busybox.inc - -SRCREV = "be947c4d97c0dacb703a6f24dd813ff6dd3a33b6" -# Lookout for PV bump too when SRCREV is changed -PV = "1.23.2+git${SRCPV}" - -S = "${WORKDIR}/git" - -SRC_URI = "git://busybox.net/busybox.git \ - file://get_header_tar.patch \ - file://busybox-appletlib-dependency.patch \ - file://busybox-udhcpc-no_deconfig.patch \ - file://find-touchscreen.sh \ - file://busybox-cron \ - file://busybox-httpd \ - file://busybox-udhcpd \ - file://default.script \ - file://simple.script \ - file://hwclock.sh \ - file://mount.busybox \ - file://syslog \ - file://syslog-startup.conf \ - file://syslog.conf \ - file://busybox-syslog.default \ - file://mdev \ - file://mdev.conf \ - file://mdev-mount.sh \ - file://umount.busybox \ - file://defconfig \ - file://busybox-syslog.service.in \ - file://busybox-klogd.service.in \ - file://fail_on_no_media.patch \ - file://run-ptest \ - file://inetd.conf \ - file://inetd \ - file://login-utilities.cfg \ - file://recognize_connmand.patch \ - file://busybox-cross-menuconfig.patch \ - file://0001-ifconfig-fix-double-free-fatal-error-in-INET_sprint.patch \ - file://0001-chown-fix-help-text.patch \ - file://mount-via-label.cfg \ - file://sha1sum.cfg \ - file://sha256sum.cfg \ -" - -EXTRA_OEMAKE += "V=1 ARCH=${TARGET_ARCH} CROSS_COMPILE=${TARGET_PREFIX} SKIP_STRIP=y" - -do_install_ptest () { - cp -r ${B}/testsuite ${D}${PTEST_PATH}/ - cp ${B}/.config ${D}${PTEST_PATH}/ - ln -s /bin/busybox ${D}${PTEST_PATH}/busybox -} - -DEFAULT_PREFERENCE = "-1" diff --git a/meta/recipes-core/busybox/files/busybox-syslog.default b/meta/recipes-core/busybox/files/busybox-syslog.default index e516caf518..2dced80231 100644 --- a/meta/recipes-core/busybox/files/busybox-syslog.default +++ b/meta/recipes-core/busybox/files/busybox-syslog.default @@ -1,4 +1,4 @@ -OPTIONS="-C" +#OPTIONS="-C" # The above option means syslogd will log to 16K shm circular buffer. # You could use `logread' to read it. diff --git a/meta/recipes-core/busybox/files/inittab b/meta/recipes-core/busybox/files/inittab new file mode 100644 index 0000000000..e8ec2ab68e --- /dev/null +++ b/meta/recipes-core/busybox/files/inittab @@ -0,0 +1,28 @@ +# This is run first except when booting in single-user mode. + +# Startup the system +::sysinit:/bin/mount -t proc proc /proc +::sysinit:/bin/mount -t sysfs sysfs /sys +::sysinit:/bin/mount -t devtmpfs devtmpfs /dev +::sysinit:/bin/mount -o remount,rw / +::sysinit:/bin/mkdir -p /dev/pts +::sysinit:/bin/mount -t devpts devpts /dev/pts +::sysinit:/bin/mount -a +::sysinit:/sbin/swapon -a +null::sysinit:/bin/ln -sf /proc/self/fd /dev/fd +null::sysinit:/bin/ln -sf /proc/self/fd/0 /dev/stdin +null::sysinit:/bin/ln -sf /proc/self/fd/1 /dev/stdout +null::sysinit:/bin/ln -sf /proc/self/fd/2 /dev/stderr +# set hostname +null::sysinit:/bin/busybox hostname -F /etc/hostname +::sysinit:/etc/init.d/rcS + +# Stuff to do before rebooting +#::ctrlaltdel:/sbin/reboot +::shutdown:/etc/init.d/rcK +::shutdown:/sbin/swapoff -a +::shutdown:/bin/umount -a -r + +# Stuff to do when restarting the init process +::restart:/sbin/init + diff --git a/meta/recipes-core/busybox/files/mdev b/meta/recipes-core/busybox/files/mdev index 96252477e0..2fbdfb073e 100755 --- a/meta/recipes-core/busybox/files/mdev +++ b/meta/recipes-core/busybox/files/mdev @@ -1,19 +1,43 @@ #!/bin/sh - -mount -t tmpfs tmpfs /dev -o size=64k,mode=0755 -mkdir /dev/pts /dev/shm -chmod 777 /dev/shm -mount -t devpts devpts /dev/pts -touch /dev/mdev.seq -echo "/sbin/mdev" > /proc/sys/kernel/hotplug -mdev -s - # -# We might have mounted something over /dev, see if /dev/initctl is there. +# Run the mdev daemon # -if test ! -p /dev/initctl -then - rm -f /dev/initctl - mknod -m 600 /dev/initctl p -fi + +DAEMON="mdev" +PIDFILE="/var/run/$DAEMON.pid" + + +start() { + echo -n "Starting $DAEMON... " + start-stop-daemon -S -b -m -p $PIDFILE -x /sbin/mdev -- -df + [ $? -eq 0 ] && echo "OK" || echo "ERROR" + + # coldplug modules + find /sys/ -name modalias -print0 | \ + xargs -0 sort -u | \ + tr '\n' '\0' | \ + xargs -0 modprobe -abq +} + +stop() { + echo -n "Stopping $DAEMON... " + start-stop-daemon -K -p $PIDFILE + [ $? -eq 0 ] && echo "OK" || echo "ERROR" +} + +restart() { + stop + start +} + +case "$1" in + start|stop|restart) + "$1" + ;; + *) + echo "Usage: $0 {start|stop|restart}" + exit 1 +esac + +exit $? diff --git a/meta/recipes-core/busybox/files/mdev-mount.sh b/meta/recipes-core/busybox/files/mdev-mount.sh index d5d66d66fb..130e9472f3 100644 --- a/meta/recipes-core/busybox/files/mdev-mount.sh +++ b/meta/recipes-core/busybox/files/mdev-mount.sh @@ -15,7 +15,7 @@ case "$ACTION" in exit 0 fi DEVBASE=`expr substr $MDEV 1 3` - if [ "${DEVBASE}" == "mmc" ] ; then + if [ "${DEVBASE}" = "mmc" ] ; then DEVBASE=`expr substr $MDEV 1 7` fi # check for "please don't mount it" file @@ -24,8 +24,8 @@ case "$ACTION" in exit 0 fi # check for full-disk partition - if [ "${DEVBASE}" == "${MDEV}" ] ; then - if [ -d /sys/block/${DEVBASE}/${DEVBASE}*1 ] ; then + if [ "${DEVBASE}" = "${MDEV}" ] ; then + if [ -f /sys/block/${DEVBASE}/${DEVBASE}*1/partition ] ; then # Partition detected, just quit exit 0 fi @@ -33,7 +33,7 @@ case "$ACTION" in # No size at all exit 0 fi - if [ `cat /sys/block/${DEVBASE}/size` == 0 ] ; then + if [ "`cat /sys/block/${DEVBASE}/size`" = "0" ] ; then # empty device, bail out exit 0 fi @@ -42,8 +42,8 @@ case "$ACTION" in if ! mount /dev/$MDEV > /dev/null 2>&1 then MOUNTPOINT="${MDEV_AUTOMOUNT_ROOT}/$MDEV" - mkdir "$MOUNTPOINT" - mount -t auto /dev/$MDEV "$MOUNTPOINT" + mkdir -p "$MOUNTPOINT" + mount -t auto /dev/$MDEV "$MOUNTPOINT" || rmdir "$MOUNTPOINT" fi ;; remove) diff --git a/meta/recipes-core/busybox/files/mdev.conf b/meta/recipes-core/busybox/files/mdev.conf index 17e93da7c3..4e9c23f14b 100644 --- a/meta/recipes-core/busybox/files/mdev.conf +++ b/meta/recipes-core/busybox/files/mdev.conf @@ -39,4 +39,6 @@ input/mouse.* 0:0 0660 tun[0-9]* 0:0 0660 =net/ [hs]d[a-z][0-9]? 0:0 660 */etc/mdev/mdev-mount.sh +mmcblk[0-9]rpmb 0:0 660 +mmcblk[0-9]boot[0-9] 0:0 660 mmcblk[0-9].* 0:0 660 */etc/mdev/mdev-mount.sh diff --git a/meta/recipes-core/busybox/files/mount.busybox b/meta/recipes-core/busybox/files/mount.busybox deleted file mode 100755 index fef945b7b2..0000000000 --- a/meta/recipes-core/busybox/files/mount.busybox +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/sh - -exec /bin/busybox mount $@ diff --git a/meta/recipes-core/busybox/files/rcK b/meta/recipes-core/busybox/files/rcK new file mode 100644 index 0000000000..f8a63e1325 --- /dev/null +++ b/meta/recipes-core/busybox/files/rcK @@ -0,0 +1,26 @@ +#!/bin/sh + +# Stop all init scripts in /etc/rc6.d +# executing them in numerical order. +# +for i in /etc/rc6.d/K??*; do + + # Ignore dangling symlinks (if any). + [ ! -f "$i" ] && continue + + case "$i" in + *.sh) + # Source shell script for speed. + ( + trap - INT QUIT TSTP + set stop + . $i + ) + ;; + *) + # No sh extension, so fork subprocess. + $i stop + ;; + esac +done + diff --git a/meta/recipes-core/busybox/files/rcS b/meta/recipes-core/busybox/files/rcS new file mode 100644 index 0000000000..bb03eb6088 --- /dev/null +++ b/meta/recipes-core/busybox/files/rcS @@ -0,0 +1,27 @@ +#!/bin/sh + +# Start all init scripts in /etc/rcS.d and /etc/rc5.d +# executing them in numerical order. +# + +for i in /etc/rcS.d/S??* /etc/rc5.d/S??* ;do + + # Ignore dangling symlinks (if any). + [ ! -f "$i" ] && continue + + case "$i" in + *.sh) + # Source shell script for speed. + ( + trap - INT QUIT TSTP + set start + . $i + ) + ;; + *) + # No sh extension, so fork subprocess. + $i start + ;; + esac +done + diff --git a/meta/recipes-core/busybox/files/rcS.default b/meta/recipes-core/busybox/files/rcS.default new file mode 100644 index 0000000000..44c9747e34 --- /dev/null +++ b/meta/recipes-core/busybox/files/rcS.default @@ -0,0 +1,31 @@ +# +# Defaults for the boot scripts in /etc/rcS.d +# + +# Time files in /tmp are kept in days. +TMPTIME=0 +# Set to yes if you want sulogin to be spawned on bootup +SULOGIN=no +# Set to no if you want to be able to login over telnet/rlogin +# before system startup is complete (as soon as inetd is started) +DELAYLOGIN=no +# Assume that the BIOS clock is set to UTC time (recommended) +UTC=yes +# Set VERBOSE to "no" if you would like a more quiet bootup. +VERBOSE=no +# Set EDITMOTD to "no" if you don't want /etc/motd to be edited automatically +EDITMOTD=no +# Whether to fsck root on boot +ENABLE_ROOTFS_FSCK=no +# Set FSCKFIX to "yes" if you want to add "-y" to the fsck at startup. +FSCKFIX=yes +# Set TICKADJ to the correct tick value for this specific machine +#TICKADJ=10000 +# Enable caching in populate-volatile.sh +VOLATILE_ENABLE_CACHE=yes +# Indicate whether the rootfs is intended to be read-only or not. +# Setting ROOTFS_READ_ONLY to yes and rebooting will give you a read-only rootfs. +# Normally you should not change this value. +ROOTFS_READ_ONLY=no +# Indicate init system type +INIT_SYSTEM=busybox diff --git a/meta/recipes-core/busybox/files/run-ptest b/meta/recipes-core/busybox/files/run-ptest index 3608a8eb65..76873c9de2 100644 --- a/meta/recipes-core/busybox/files/run-ptest +++ b/meta/recipes-core/busybox/files/run-ptest @@ -1,7 +1,9 @@ #!/bin/sh -current_dir=$(readlink -f $0) -export bindir=$(dirname $current_dir) +current_path=$(readlink -f $0) +export bindir=$(dirname $current_path) +export PATH=$bindir/bin:$PATH +export SKIP_KNOWN_BUGS=1 cd testsuite || exit 1 -./runtest -v | sed -r 's/^(SKIPPED|UNTESTED):/SKIP:/' +LANG=C.UTF-8 ./runtest -v | sed -r 's/^(SKIPPED|UNTESTED):/SKIP:/' diff --git a/meta/recipes-core/busybox/files/simple.script b/meta/recipes-core/busybox/files/simple.script index 22168b07e6..013440574d 100644 --- a/meta/recipes-core/busybox/files/simple.script +++ b/meta/recipes-core/busybox/files/simple.script @@ -14,7 +14,7 @@ root_is_nfs() { } have_bin_ip=0 -if [ -x /sbin/ip ]; then +if [ -x /SBIN_DIR/ip ]; then have_bin_ip=1 BROADCAST="broadcast +" fi @@ -23,34 +23,34 @@ fi case "$1" in deconfig) - if [ -x /sbin/resolvconf ]; then - /sbin/resolvconf -d "${interface}.udhcpc" + if [ -x /SBIN_DIR/resolvconf ]; then + /SBIN_DIR/resolvconf -d "${interface}.udhcpc" fi if ! root_is_nfs ; then if [ $have_bin_ip -eq 1 ]; then - ip addr flush dev $interface - ip link set dev $interface up + /SBIN_DIR/ip -4 addr flush dev $interface + /SBIN_DIR/ip link set dev $interface up else - /sbin/ifconfig $interface 0.0.0.0 + /SBIN_DIR/ifconfig $interface 0.0.0.0 fi fi ;; renew|bound) if [ $have_bin_ip -eq 1 ]; then - ip addr add dev $interface local $ip/$mask $BROADCAST + /SBIN_DIR/ip addr add dev $interface local $ip/$mask $BROADCAST else - /sbin/ifconfig $interface $ip $BROADCAST $NETMASK + /SBIN_DIR/ifconfig $interface $ip $BROADCAST $NETMASK fi if [ -n "$router" ] ; then if ! root_is_nfs ; then if [ $have_bin_ip -eq 1 ]; then - while ip route del default dev $interface 2>/dev/null ; do + while /SBIN_DIR/ip route del default dev $interface 2>/dev/null ; do : done else - while route del default gw 0.0.0.0 dev $interface 2>/dev/null ; do + while /SBIN_DIR/route del default gw 0.0.0.0 dev $interface 2>/dev/null ; do : done fi @@ -59,9 +59,9 @@ case "$1" in metric=10 for i in $router ; do if [ $have_bin_ip -eq 1 ]; then - ip route add default via $i metric $metric + /SBIN_DIR/ip route add default via $i metric $metric dev $interface else - route add default gw $i dev $interface metric $metric 2>/dev/null + /SBIN_DIR/route add default gw $i dev $interface metric $metric 2>/dev/null fi metric=$(($metric + 1)) done @@ -77,8 +77,8 @@ case "$1" in " done - if [ -x /sbin/resolvconf ]; then - echo -n "$R" | /sbin/resolvconf -a "${interface}.udhcpc" + if [ -x /SBIN_DIR/resolvconf ]; then + echo -n "$R" | /SBIN_DIR/resolvconf -a "${interface}.udhcpc" else echo -n "$R" > "$RESOLV_CONF" fi diff --git a/meta/recipes-core/busybox/files/syslog b/meta/recipes-core/busybox/files/syslog index 89c4d12e9c..2208613e8c 100644 --- a/meta/recipes-core/busybox/files/syslog +++ b/meta/recipes-core/busybox/files/syslog @@ -51,6 +51,22 @@ else SYSLOG_ARGS="-C" fi +waitpid () +{ + pid=$1 + # Give pid a chance to exit before we restart with a 5s timeout in 1s intervals + if [ -z "$pid" ]; then + return + fi + timeout=5; + while [ $timeout -gt 0 ] + do + timeout=$(( $timeout-1 )) + kill -0 $pid 2> /dev/null || break + sleep 1 + done +} + case "$1" in start) echo -n "Starting syslogd/klogd: " @@ -65,7 +81,11 @@ case "$1" in echo "done" ;; restart) - $0 stop + pid1=`pidof syslogd` + pid2=`pidof klogd` + $0 stop + waitpid $pid1 + waitpid $pid2 $0 start ;; *) diff --git a/meta/recipes-core/busybox/files/umount.busybox b/meta/recipes-core/busybox/files/umount.busybox deleted file mode 100755 index f3731626e6..0000000000 --- a/meta/recipes-core/busybox/files/umount.busybox +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/sh - -exec /bin/busybox umount $@ |