aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-kernel/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch
diff options
context:
space:
mode:
Diffstat (limited to 'meta/recipes-kernel/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch')
-rw-r--r--meta/recipes-kernel/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch145
1 files changed, 145 insertions, 0 deletions
diff --git a/meta/recipes-kernel/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch b/meta/recipes-kernel/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch
new file mode 100644
index 0000000000..fc34fb983e
--- /dev/null
+++ b/meta/recipes-kernel/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch
@@ -0,0 +1,145 @@
+From 4288b7df4ae6629a4fb14aca2c489da01d4d19c3 Mon Sep 17 00:00:00 2001
+From: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
+Date: Tue, 31 Mar 2009 12:35:09 -0700
+Subject: [PATCH] musb: support disconnect after HNP roleswitch
+
+Adjust HNP state machines in MUSB driver so that they handle the
+case where the cable is disconnected. The A-side machine was
+very wrong (unrecoverable); the B-Side was much less so.
+
+ - A_PERIPHERAL ... as usual, the non-observability of the ID
+ pin through Mentor's registers makes trouble. We can't go
+ directly to A_WAIT_VFALL to end the session and start the
+ disconnect processing. We can however sense link suspending,
+ go to A_WAIT_BCON, and from there use OTG timeouts to finally
+ trigger that A_WAIT_VFALL transition. (Hoping that nobody
+ reconnects quickly to that port and notices the wrong state.)
+
+ - B_HOST ... actually clear the Host Request (HR) bit as the
+ messages say, disconnect the peripheral from the root hub,
+ and don't detour through a suspend state. (In some cases
+ this would eventually have cleaned up.)
+
+Also adjust the A_SUSPEND transition to respect the A_AIDL_BDIS
+timeout, so if HNP doesn't trigger quickly enough the A_WAIT_VFALL
+transition happens as it should.
+
+Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
+---
+ drivers/usb/musb/musb_core.c | 41 +++++++++++++++++++++++++++-----------
+ drivers/usb/musb/musb_gadget.c | 2 +
+ drivers/usb/musb/musb_virthub.c | 4 +++
+ 3 files changed, 35 insertions(+), 12 deletions(-)
+
+diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
+index 9dc995a..5770ccb 100644
+--- a/drivers/usb/musb/musb_core.c
++++ b/drivers/usb/musb/musb_core.c
+@@ -304,9 +304,11 @@ void musb_otg_timer_func(unsigned long data)
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->is_active = 0;
+ break;
++ case OTG_STATE_A_SUSPEND:
+ case OTG_STATE_A_WAIT_BCON:
+- DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
+- musb_hnp_stop(musb);
++ DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
++ musb_set_vbus(musb, 0);
++ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ break;
+ default:
+ DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
+@@ -324,15 +326,12 @@ void musb_hnp_stop(struct musb *musb)
+ void __iomem *mbase = musb->mregs;
+ u8 reg;
+
++ DBG(1, "HNP: stop from %s\n", otg_state_string(musb));
++
+ switch (musb->xceiv->state) {
+ case OTG_STATE_A_PERIPHERAL:
+- case OTG_STATE_A_WAIT_VFALL:
+- case OTG_STATE_A_WAIT_BCON:
+- DBG(1, "HNP: Switching back to A-host\n");
+ musb_g_disconnect(musb);
+- musb->xceiv->state = OTG_STATE_A_IDLE;
+- MUSB_HST_MODE(musb);
+- musb->is_active = 0;
++ DBG(1, "HNP: back to %s\n", otg_state_string(musb));
+ break;
+ case OTG_STATE_B_HOST:
+ DBG(1, "HNP: Disabling HR\n");
+@@ -775,7 +774,16 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+ #endif /* HOST */
+ #ifdef CONFIG_USB_MUSB_OTG
+ case OTG_STATE_B_HOST:
+- musb_hnp_stop(musb);
++ /* REVISIT this behaves for "real disconnect"
++ * cases; make sure the other transitions from
++ * from B_HOST act right too. The B_HOST code
++ * in hnp_stop() is currently not used...
++ */
++ musb_root_disconnect(musb);
++ musb_to_hcd(musb)->self.is_b_host = 0;
++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
++ MUSB_DEV_MODE(musb);
++ musb_g_disconnect(musb);
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ musb_hnp_stop(musb);
+@@ -807,10 +815,19 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+ switch (musb->xceiv->state) {
+ #ifdef CONFIG_USB_MUSB_OTG
+ case OTG_STATE_A_PERIPHERAL:
+- /*
+- * We cannot stop HNP here, devctl BDEVICE might be
+- * still set.
++ /* We also come here if the cable is removed, since
++ * this silicon doesn't report ID-no-longer-grounded.
++ *
++ * We depend on T(a_wait_bcon) to shut us down, and
++ * hope users don't do anything dicey during this
++ * undesired detour through A_WAIT_BCON.
+ */
++ musb_hnp_stop(musb);
++ usb_hcd_resume_root_hub(musb_to_hcd(musb));
++ musb_root_disconnect(musb);
++ musb_platform_try_idle(musb, jiffies
++ + msecs_to_jiffies(musb->a_wait_bcon
++ ? : OTG_TIME_A_WAIT_BCON));
+ break;
+ #endif
+ case OTG_STATE_B_PERIPHERAL:
+diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
+index 7dd3d59..8b3c4e2 100644
+--- a/drivers/usb/musb/musb_gadget.c
++++ b/drivers/usb/musb/musb_gadget.c
+@@ -1962,9 +1962,11 @@ void musb_g_disconnect(struct musb *musb)
+ DBG(2, "Unhandled disconnect %s, setting a_idle\n",
+ otg_state_string(musb));
+ musb->xceiv->state = OTG_STATE_A_IDLE;
++ MUSB_HST_MODE(musb);
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
++ MUSB_HST_MODE(musb);
+ break;
+ case OTG_STATE_B_WAIT_ACON:
+ case OTG_STATE_B_HOST:
+diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
+index 14f7cf3..e8ef925 100644
+--- a/drivers/usb/musb/musb_virthub.c
++++ b/drivers/usb/musb/musb_virthub.c
+@@ -83,6 +83,10 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
+ musb->xceiv->state = OTG_STATE_A_SUSPEND;
+ musb->is_active = is_otg_enabled(musb)
+ && musb->xceiv->host->b_hnp_enable;
++ if (musb->is_active)
++ mod_timer(&musb->otg_timer, jiffies
++ + msecs_to_jiffies(
++ OTG_TIME_A_AIDL_BDIS));
+ musb_platform_try_idle(musb, 0);
+ break;
+ #ifdef CONFIG_USB_MUSB_OTG
+--
+1.6.0.4
+