diff options
Diffstat (limited to 'meta/recipes-kernel/linux/linux-rp-2.6.24/pxa2xx_udc-clock.patch')
| -rw-r--r-- | meta/recipes-kernel/linux/linux-rp-2.6.24/pxa2xx_udc-clock.patch | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/meta/recipes-kernel/linux/linux-rp-2.6.24/pxa2xx_udc-clock.patch b/meta/recipes-kernel/linux/linux-rp-2.6.24/pxa2xx_udc-clock.patch new file mode 100644 index 0000000000..14c496a31a --- /dev/null +++ b/meta/recipes-kernel/linux/linux-rp-2.6.24/pxa2xx_udc-clock.patch @@ -0,0 +1,221 @@ +--- + drivers/usb/gadget/pxa2xx_udc.c | 88 ++++++++++++++++++++++------------------ + drivers/usb/gadget/pxa2xx_udc.h | 4 + + 2 files changed, 53 insertions(+), 39 deletions(-) + +--- g26.orig/drivers/usb/gadget/pxa2xx_udc.c 2008-02-19 12:47:06.000000000 -0800 ++++ g26/drivers/usb/gadget/pxa2xx_udc.c 2008-02-19 14:07:17.000000000 -0800 +@@ -103,6 +103,12 @@ static const char ep0name [] = "ep0"; + #error "Can't configure both IXP and PXA" + #endif + ++/* IXP doesn't yet support <linux/clk.h> */ ++#define clk_get(dev,name) NULL ++#define clk_enable(clk) do { } while (0) ++#define clk_disable(clk) do { } while (0) ++#define clk_put(clk) do { } while (0) ++ + #endif + + #include "pxa2xx_udc.h" +@@ -934,20 +940,31 @@ static void udc_disable(struct pxa2xx_ud + /* We disable the UDC -- and its 48 MHz clock -- whenever it's not + * in active use. + */ +-static int pullup(struct pxa2xx_udc *udc, int is_active) ++static int pullup(struct pxa2xx_udc *udc) + { +- is_active = is_active && udc->vbus && udc->pullup; ++ int is_active = udc->vbus && udc->pullup && !udc->suspended; + DMSG("%s\n", is_active ? "active" : "inactive"); +- if (is_active) +- udc_enable(udc); +- else { +- if (udc->gadget.speed != USB_SPEED_UNKNOWN) { +- DMSG("disconnect %s\n", udc->driver +- ? udc->driver->driver.name +- : "(no driver)"); +- stop_activity(udc, udc->driver); ++ if (is_active) { ++ if (!udc->active) { ++ udc->active = 1; ++ /* Enable clock for USB device */ ++ clk_enable(udc->clk); ++ udc_enable(udc); + } +- udc_disable(udc); ++ } else { ++ if (udc->active) { ++ if (udc->gadget.speed != USB_SPEED_UNKNOWN) { ++ DMSG("disconnect %s\n", udc->driver ++ ? udc->driver->driver.name ++ : "(no driver)"); ++ stop_activity(udc, udc->driver); ++ } ++ udc_disable(udc); ++ /* Disable clock for USB device */ ++ clk_disable(udc->clk); ++ udc->active = 0; ++ } ++ + } + return 0; + } +@@ -958,9 +975,9 @@ static int pxa2xx_udc_vbus_session(struc + struct pxa2xx_udc *udc; + + udc = container_of(_gadget, struct pxa2xx_udc, gadget); +- udc->vbus = is_active = (is_active != 0); ++ udc->vbus = (is_active != 0); + DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); +- pullup(udc, is_active); ++ pullup(udc); + return 0; + } + +@@ -975,9 +992,8 @@ static int pxa2xx_udc_pullup(struct usb_ + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) + return -EOPNOTSUPP; + +- is_active = (is_active != 0); +- udc->pullup = is_active; +- pullup(udc, is_active); ++ udc->pullup = (is_active != 0); ++ pullup(udc); + return 0; + } + +@@ -1146,11 +1162,6 @@ static void udc_disable(struct pxa2xx_ud + + udc_clear_mask_UDCCR(UDCCR_UDE); + +-#ifdef CONFIG_ARCH_PXA +- /* Disable clock for USB device */ +- clk_disable(dev->clk); +-#endif +- + ep0_idle (dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; + } +@@ -1191,11 +1202,6 @@ static void udc_enable (struct pxa2xx_ud + { + udc_clear_mask_UDCCR(UDCCR_UDE); + +-#ifdef CONFIG_ARCH_PXA +- /* Enable clock for USB device */ +- clk_enable(dev->clk); +-#endif +- + /* try to clear these bits before we enable the udc */ + udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); + +@@ -1286,7 +1292,7 @@ fail: + * for set_configuration as well as eventual disconnect. + */ + DMSG("registered gadget driver '%s'\n", driver->driver.name); +- pullup(dev, 1); ++ pullup(dev); + dump_state(dev); + return 0; + } +@@ -1329,7 +1335,8 @@ int usb_gadget_unregister_driver(struct + return -EINVAL; + + local_irq_disable(); +- pullup(dev, 0); ++ dev->pullup = 0; ++ pullup(dev); + stop_activity(dev, driver); + local_irq_enable(); + +@@ -2131,13 +2138,11 @@ static int __init pxa2xx_udc_probe(struc + if (irq < 0) + return -ENODEV; + +-#ifdef CONFIG_ARCH_PXA + dev->clk = clk_get(&pdev->dev, "UDCCLK"); + if (IS_ERR(dev->clk)) { + retval = PTR_ERR(dev->clk); + goto err_clk; + } +-#endif + + pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, + dev->has_cfr ? "" : " (!cfr)", +@@ -2250,10 +2255,8 @@ lubbock_fail0: + if (dev->mach->gpio_vbus) + gpio_free(dev->mach->gpio_vbus); + err_gpio_vbus: +-#ifdef CONFIG_ARCH_PXA + clk_put(dev->clk); + err_clk: +-#endif + return retval; + } + +@@ -2269,7 +2272,9 @@ static int __exit pxa2xx_udc_remove(stru + if (dev->driver) + return -EBUSY; + +- udc_disable(dev); ++ dev->pullup = 0; ++ pullup(dev); ++ + remove_proc_files(); + + if (dev->got_irq) { +@@ -2289,9 +2294,7 @@ static int __exit pxa2xx_udc_remove(stru + if (dev->mach->gpio_pullup) + gpio_free(dev->mach->gpio_pullup); + +-#ifdef CONFIG_ARCH_PXA + clk_put(dev->clk); +-#endif + + platform_set_drvdata(pdev, NULL); + the_controller = NULL; +@@ -2317,10 +2320,15 @@ static int __exit pxa2xx_udc_remove(stru + static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) + { + struct pxa2xx_udc *udc = platform_get_drvdata(dev); ++ unsigned long flags; + + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) + WARN("USB host won't detect disconnect!\n"); +- pullup(udc, 0); ++ udc->suspended = 1; ++ ++ local_irq_save(flags); ++ pullup(udc); ++ local_irq_restore(flags); + + return 0; + } +@@ -2328,8 +2336,12 @@ static int pxa2xx_udc_suspend(struct pla + static int pxa2xx_udc_resume(struct platform_device *dev) + { + struct pxa2xx_udc *udc = platform_get_drvdata(dev); ++ unsigned long flags; + +- pullup(udc, 1); ++ udc->suspended = 0; ++ local_irq_save(flags); ++ pullup(udc); ++ local_irq_restore(flags); + + return 0; + } +--- g26.orig/drivers/usb/gadget/pxa2xx_udc.h 2008-02-19 12:47:06.000000000 -0800 ++++ g26/drivers/usb/gadget/pxa2xx_udc.h 2008-02-19 12:57:42.000000000 -0800 +@@ -119,7 +119,9 @@ struct pxa2xx_udc { + has_cfr : 1, + req_pending : 1, + req_std : 1, +- req_config : 1; ++ req_config : 1, ++ suspended : 1, ++ active : 1; + + #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) + struct timer_list timer; +- |