| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It makes sense to use the compression mechanism also for conversion,
for example of a whole-disk image into .vdi (VirtualBox). That part
already works, like this:
COMPRESSIONTYPES_append = " vdi"
COMPRESS_CMD_vdi = "qemu-img convert -O vdi ${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.${type} ${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.${type}.vdi"
IMAGE_DEPENDS_vdi = "qemu-native"
But then it also makes sense to allow compressing the resulting image,
which only works after enhancing the image.bbclass.
For example, suppose a custom image command produces "dsk" images. Then
it becomes possible to set
IMAGE_FSTYPES = " dsk.xz dsk.vdi.xz"
and do_image_dsk will automatically produce the intermediate images,
convert to dsk.xz resp. dsk.vdi -> dsk.vdi.xz and delete all
intermediate images. Symlinks are also set correctly.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The patch for making the .rootfs configurable was incomplete: in the
python create_symlinks() method the new variable must be expanded
explicitly.
Not doing so broke the symlink creation and that led to hard build
failures in image types depending on the boot-directdisk.bbclass (like
qcow2) because the build_boot_dd() method relied on the symlink.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, the image file name contains ".rootfs" to distinguish the
image file from other files created during image building. However,
for certain image types (for example, .hddimg) the ".rootfs" suffix is
redundant because the type suffix alone already uniquely identifies
the main image file (core-image-minimal-intel-corei7-64.hddimg instead
of core-image-minimal-intel-corei7-64.rootfs.hddimg).
With this change, distros that prefer the shorter image name can
override the .rootfs suffix unconditionally with
IMAGE_NAME_SUFFIX ?= '' in their distro configuration
or with some condition check like this:
python () {
if <whole-disk image format active>:
d.setVar('IMAGE_NAME_SUFFIX', '')
}
The exact logic when to remove the extra suffix depends on the distro
and how it enables its own image type.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Hob UI is gone from BitBake, so we should remove this shortcut
script.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This class was only used by Hob, and since Hob has now been removed we
can drop it as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Hob was the only thing paying attention to this, and now Hob itself has
been removed we can remove this as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Hob was the only thing paying attention to this, and now Hob itself has
been removed we can remove this as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
uninative has some specific setup requirements. Rather than have everyone
doing this themselves, do this centrally and allow people to opt into it
based on some Yocto Project builds of the uninative tarballs.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that nativesdk-glibc handles GCONV_PATH itself we don't need to do
this here. This unbreaks mtools for the native case without uninative
since the existing patch wasn't nativesdk specific.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
uninative hand codes the list of files which need relocation, add the libc
to that list to ensure GCONF_PATH is updated.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to be able to update uninative if the version changes. To do this,
stash a checksum of the installed uninative tarball into a file. If this
changes, we update uninative.
For cleaner download messages, we place the tarballs into directories
based on the checksum.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move duplicate code into a common function
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We may see binaries built with gcc5 run or linked into gcc4 environment
so use the older libstdc++ standard for now until we don't support gcc4
on the host system. https://wiki.debian.org/GCC5 has more details about this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous attempt at soft-failing when uninative was enabled didn't actually
work, because the workers didn't evaluate the function that actually enabled
uninative.
In a BuildStarted handler we can check if we need to download or extract the
uninative tarball.
In a ConfigParsed handler on the workers we can check if the uninative loader is
present, and if so enable it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're seeing various failures where nativesdk glibc can't find the gconv
modules. We've tried various workaround but this needs fixing 'properly'.
One significant problem is knowing when a binary would use this glibc
and hence when to set the path and when not to.
Add the default path to its own special section which the sdk
relocation script already knows how to handle and remap.
This significantly improves the usability of uninative.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All our systems usually have tar, if we want the native sstate to work
universally, we need to prefer this. This avoids a system with gtar
causing dpkg-native to use it and it not being present on some systems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
configure needs wayland-scanner which comes from wayland-native, add missing
DEPENDS.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Apply the same sort of changes to the Cortex-A17 tune as were done in commit
35392025f3236f5e5393f9cf0857732da9a2e503.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
uninative needs to adjust NATIVELSBSTRING fairly late in the
configuration parsing process but the sstate code encodes it into
variables. Since this string doesn't vary on a per recipe basis, we
defer its expansion until usage time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Prelinking on x86-64 wasn't working out the box as it uses /lib and
not /lib64 for libs. Prelink was refusing to link as the dynamic loader
didn't match its idea of the right path. Passing in the --dyanmic-linker
option avoids this.
We can share code from image-mklibs so abstract that into a new class,
linuxloader.bbclass.
This does break prelinking of multilib images, I've opened a bug so we
can loop back and fix that problem, the code would need to iterate the
dynamic loaders (and setup ld.so.conf files for it).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Prelink contains some hardcoded assumptions about the path layout of
the target system. Unfortunately if the system doesn't match, prelink
doesn't work. This breaks:
a) prelink of those images
b) the unsafe-references-in-binaries QA test (which uses prelink-rtld)
One way to work around this is to construct an ld.so.conf file which
lists the library paths in question. We do this in sanity QA check and
in the rootfs prelink code, being careful not to trample any existing
target ld.so.conf.
There is an additional problem that $LIB references in RPATHs won't be
handled correctly, I've not see any system use these in reality though
so this change at least improves things.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When installing the eSDK, if setscene task fail for some reason, the tests
would ignore this. This is bad since we assume they're working.
This adds some sanity test code which detects if setscene tasks are
needing to run and errors if there are any.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When reading the mtime from disk, the system can get a floating point
value. Convert this to an int for comparision purposes, else some
packages always get reindexed as the value in the index is an int.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The xmlto script uses bashisms and checks at configure time to find a bash
binary. If the build host has /bin/sh as bash then this gets detected, which
causes problems in native builds if the sstate is then shared to a machine with
/bin/sh as dash.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Apply a patch taken from Gentoo to hopefully fix the remaining parallel make
races.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libgcc_s.so.1 is required by btrfs-tools at runtime for certain
operations, such as scrub due to the use of pthread_cancel.
Signed-off-by: Robert Joslyn <robert_joslyn@selinc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes to the btrfs-tools recipe means we need to add libgcc-native
to ASSUME_PROVIDED.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_compile does this but do_install needs same env as well
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch is no longer required as upstreamed has fixed
the problem in more comprehensive way
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If gdb was configured to use the internal readline but static libraries were
disabled, gdb wouldn't dutifully not build libreadline.a which was a problem
when it tried to link with that library.
Solve this by ensuring --enable-static is passed to the readline configure.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the quotes in the bb.utils.contains feature check so that the call
results in a boolean value instead of a string, which allows the warning
check to occur.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Clearly I didn't test this part of the code - lists don't have an "add"
method. Needless to say I have tested it now.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A sensible assumption is that BSPs have a USB keyboard and mouse connected
unless told otherwise, so flip the logic in the formfactor config script that
previously assumed that a keyboard was not connected by default.
[ YOCTO #9174 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ls adds a '.' at the end of the permission field list on SELinux
machines, filter this out so root tests work on SELinux machines.
And backport one patch for other tests.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libitm is already disabled for big endian MIPS, but needs to be
disabled for little endian MIPS targets too.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a build-sdk command which is only available within the extensible
SDK that builds a derivative extensible SDK. The idea is recipes in the
workspace become a part of the new SDK - for example, this allows taking
a vendor provided SDK, adding a few libs and then producing a new SDK
with those included.
When normally building the extensible SDK, the workspace is excluded;
here we need to copy into the new SDK (renaming it in the process); the
recipes' task signatures become locked and thus the sources are no
longer needed, so they are removed along with the workspace bbappends
which would interfere with the locked signatures. Additionally we need
to just copy the configuration files (i.e. local.conf and auto.conf)
rather than filtering and appending to them since that work has already
been done when constructing the original SDK. The extra sstate artifacts
from workspace recipes are also determined and copied into the new SDK
in minimal mode (on the assumption that you won't set up a new sstate
mirror).
This reuses some code from build-image, so that needed to be
generalised to allow that.
Implements [YOCTO #8892].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Hyphens aren't allowed in python identifiers, so you shouldn't use them
in module names or they are more difficult to import.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixing one of the recipes not to contain unsafe references to paths
results in this QA test failing. Improve the test so that we test
the recipe works, then if we intentionally break the recipe, the
issue is detected.
Also split out the binaries test from the scripts test. The binaries
issue may also get 'fixed' in future and need the same fix.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, the checking for unsafe references is not strict enough. It
only checks whether '/usr/' is in the script. As a result, any script
containing statements like below will match this check.
PATH="/bin:/sbin:/usr/bin:/usr/sbin"
However, as we can see, this is actually not an unsafe reference. What
we really want to check is something like '/usr/bin/tail', so we should
make the checking stricter.
This patch solves the QA warning in gzip and nfs-utils.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Testing of local sdk updates was commented out.
Local sdk updates are functional now, so the tests should be re-enabled.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"sdk_update" uses a variable newsdk_path, which was never declared.
This would cause the command:
devtool sdk-update <poky-sdk-latest>
to fail with an error:
NameError: global name 'newsdk_path' is not defined
The remedy is to declare newsdk_path as it was no doubt intended,
corresponding to the argument specifying <poky-sdk-latest>.
[YOCTO#9042]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Formatting improvements only, no functional changes.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CVE-2016-0800
CVE-2016-0705
CVE-2016-0798
CVE-2016-0797
CVE-2016-0799
CVE-2016-0702
CVE-2016-0703
CVE-2016-0704
https://www.openssl.org/news/secadv/20160301.txt
Updated 2 debian patches to match changes in 1.0.2g
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With empty LABELS variable build_efi_cfg skips most of its
functionality producing warning message:
'LABELS not defined, nothing to do'
This causes build failure for efi images.
Setting default value for LABELS to 'boot install' should fix
this issue.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Ross Burton
Richard Purdie
Patrick Ohly
Paul Eggleton
Trevor Woerner
Robert Joslyn
Khem Raj
Nathan Rossi
He Zhe
Andre McCurdy
Chen Qi
Jonathan Liu
Juro Bystricky
Armin Kuster
Ed Bartosh