| Age | Commit message (Collapse) | Author |
|---|
|
A recent change in bitbake added filename/lineno information to the
parameters of bb.data.build_dependencies(). The codeparser tests
required a little adaption to the changes, adding the flags to the FOO
variable used in the tests.
The error seen when running the tests is a TypeError exception raised
in bb.codeparser:
TypeError: int() argument must be a string or a number, not 'NoneType'
(Bitbake rev: f1fe674397ac5cd355696d5b4cc90b7cfa6c867f)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the resent change in rootfs creation code setVariable
rpc calls don't set variables for bitbake workers anymore.
Writen variables to toaster.conf should solve this issue.
[YOCTO #8910]
(Bitbake rev: d6dfe40320ff6ca420d9f9016b4d1d83d10f1d59)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
another which needs to run"
This reverts commit b22592af8145a8c7c4ada2fa7c1dee2e753eca46.
That commit isn't entirely clear about why this change is needed but
I do have a usecase where this breaks things. If for example you run
"bitbake X -c packagedata" and that packagedata is in sstate, you'd
expect this to work.
If sstate doesn't contain a do_populate_sysroot for a dependency, you
would still expect the command above to succeed and you would not
expect
it to rebuild that dependency. With the current code, this isn't what
happens. The code finds the sstate for do_populate_sysroot missing,
this makes the task "uncovered" and this in turn makes it unskippable.
The example I found with this was avahi-ui, where it would trigger
a build of libdaemon to obtain its populate_sysroot.
Since this behaviour seems completely incorrect, revert the older patch
and we'll address any issues that crop up as a result.
(Bitbake rev: 36a9840a5da17cc14561881fdd6a4f2cb0a75e49)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When an artifact download is requested, Toaster goes through a
convoluted series of conditions to decide which file to push
to the response. In the case of build artifact downloads for
command line builds, this caused an ugly exception, as command
line builds don't have a build request.
To simplify and catch more corner cases, remove the code which
fetches files via the build environment (we only support the local
build environment anyway). Then push all requests along a single
path, catching any missing file errors, missing object errors
or poorly-formed URLs in a single except clause which always returns
a valid response.
Also modify the text on the "unavailable artifact" page so it
says that the artifact doesn't exist, rather than it "no longer"
exists (exceptions may occur because an invalid artifact was
requested, rather than an artifact which was removed).
[YOCTO #7603]
(Bitbake rev: 24e20db55c2933de5e58ca754b8fd5b624f47820)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OSErrors occurring in toaster.bbclass are converted to
OSErrorException metadata events. They were then being swallowed
as unprocessed events by toasterui, which made them difficult
to spot.
Explicitly catch OSErrorException events and log them so they
are easier to spot and debug.
(Bitbake rev: 69f2b2bc373ce114609600b59a6b6ccef20771c9)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The event mask for toasterui doesn't include MetadataEvents.
This means that we're missing the ArtifactFileSize event
(among others), which is the one we use to populate the SDK
artifact table.
Add that event type to the toasterui event mask so we can
record SDK artifacts as they are created.
[YOCTO #7603]
(Bitbake rev: d0276a831bb8cffd42c8367895633eaa1fa1ed30)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes Toaster connection to the bitbake server fails with
this error in the log:
ERROR: Could not connect to server 0.0.0.0:46572
: Could not register UI event handler
It happens more often on slow machines.
Increasing timeout after restarting bitbake should fix this issue.
[YOCTO #8776]
(Bitbake rev: b64a0adc1efd72aa4d46df3e043dd14543abae3d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Minor fixes to code formatting and small improvements from
code review.
(Bitbake rev: 2c97f3a5c6ae37de910deb90390c5b856a600c5f)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Django command-line tests can no longer test the content
of the projects/, builds/ and projectbuilds/ pages, as
ToasterTable pages are populated by JavaScript.
Fix/remove affected tests by converting them to tests on the
JSON returned by the ToasterTable.
[YOCTO #8738]
(Bitbake rev: 85efa9530fa6181855e051bfd14de1c15db9c3b7)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code in views.py for setting up the template context for
old non-ToasterTable views is no longer necessary, as this
is now implemented in tables.py.
The template files for these views have also been removed.
[YOCTO #8738]
(Bitbake rev: 2b5a13afb068c85466436914d8d4ac3b31bc5c02)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The error and warning counts displayed for builds were counts of
the errors and warnings objects associated with a build. Because these
values were being derived on the fly, it was not possible to sort by
them.
Previously, the 3rd party django-aggregate-if library was used to
add aggregate fields to Build objects and should then have been
used to populate the "all builds" and "project builds" tables. However,
at some point the templates had changed so that the error and warning
counts were coming from the properties on the Build model and not from
these aggregates. This meant that it was not possible to sort by these
fields.
Django 1.8 supports conditional aggregates in annotation fields on
querysets. This means we can remove django-aggregate-if, use the new Django
1.8 feature to derive errors_no and warnings_no fields as annotations,
then use those annotation fields in the templates. This makes the "builds"
tables sortable again.
[YOCTO #8738]
(Bitbake rev: 9be7c5c18b325f6ed40bc431ac408db242007eb1)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a range filter action had an empty from/to field, the range
filter could still be applied. This was confusing, as an invalid
filter range caused all records to display, even though a filter
appeared to have been applied (by the highlighted state of
the filter button).
Change the state of the "Apply" button, disabling it if the radio
button for a range filter action is selected but the range is
incomplete (from or to field is empty).
When a non-range filter is selected, the "Apply" button always
enable the "Apply" button.
[YOCTO #8738]
(Bitbake rev: 168184b28165d7aa354b9092b5986f91c58d550d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The radio button for a filter action is disabled if that filter
action has no associated records. However, the label retains
the normal font styling, so it's unclear that the action is
not available.
Add the "muted" class to the label for a filter action (and still
disable its radio button) if it has no records associated with it.
[YOCTO #8738]
(Bitbake rev: b7f7ff095c9c4c922e608f776713f17acc1f150d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Incorrect columns were shown by default in the "all builds",
"project builds" and "all projects" pages.
Set the "hidden" property on columns in these tables to hide the
correct columns.
Add a set_column_hidden() method to ToasterTable so that the
"hidden" property can be overridden for the machines column
in the project builds page (it shares a superclass with
all builds).
Make the time column on all builds page hideable.
[YOCTO #8738]
(Bitbake rev: be3982c71703eaa51e7f3352e0cb5b3af11c9ead)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The conversion of some ToasterTable Build object querysets to
JSON caused a serialisation error. This is because one of the
fields in the queryset was of type decimal.Decimal, and our
serialiser didn't know what to do with it.
Add a clause to check for decimal fields and serialise them
so that correct JSON can be generated.
(Bitbake rev: fa6229d4edf5904ccaa9dc323d0ab2318d1ef314)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In line with comments from review, remove the QuerysetFilter
class (redundant) and convert ProjectFilters into a class
with static methods.
[YOCTO #8738]
(Bitbake rev: 59379bf6467029223045c5ebef868729d8e02c86)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Clicking on the radio button for a date range filter action
populates the from and to fields for that action if they are empty.
However, because this doesn't fire "change" events, clicking on
the radio button doesn't update the filter_value hidden field. This
means that the date range action's filter_value parameter isn't
set correctly when the filter popup is submitted.
Manually call the changeHandler() to set the filter_value whenever
the radio for a date range filter is clicked.
[YOCTO #8738]
(Bitbake rev: 1a3038cf8d9b32532f1fe92cd3472b4473ffc0c4)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disabling the "project" column in a ToasterTable for builds
causes the recent builds area to be hidden. This is because
the column hiding code hides all elements with a class matching
".<column>", regardless of where they occur on the page; and
the recent builds area was using the ".project-name" class,
which means it is included in the set of elements which are hidden.
Scope the element search to the table so that only elements
within the table are hidden or shown.
[YOCTO #8792]
(Bitbake rev: 151bc20daf51e0ab8baf11ea29244b7fec1f8a22)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the all builds ToasterTable as the basis for the project builds
ToasterTable.
[YOCTO #8738]
(Bitbake rev: 87bcfb740dd2d9944e35a2a1f71cbf8ff3b266e9)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the "today" and "yesterday" filters to the started_on
and completed_on columns in the builds table.
During this work, some minor adjustments were made to the
behaviour of the builds table:
* Amend filter action variable names so they're more succinct.
* Retain order in which actions are added to a filter, as this
ordering is used in the UI when displaying the filter actions.
* Always show the table chrome, otherwise it's not possible
to edit the columns shown until there are 10 or more results.
* Because date range searches may return no results, make sure
that the search bar and "show all results" link are visible
when the query returns no results.
[YOCTO #8738]
(Bitbake rev: f17cfa009e58833e0e55884fa04de8abd522b6bc)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Implement the completed_on and started_on filtering for
builds.
Also separate the name of a filter ("filter" in the querystring)
from its value ("filter_value" in the querystring). This enables
filtering to be defined in the querystring more intuitively,
and also makes it easier to add other types of filter (e.g.
by day).
[YOCTO #8738]
(Bitbake rev: d47c32e88c2d4a423f4d94d49759e557f425a539)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recent builds section was disabled while converting the
all builds page to ToasterTable.
Re-enable the recent builds area and add the data it requires
to the ToasterTable context.
[YOCTO #8738]
(Bitbake rev: d6df4545bd134a23c9bd3cd1ba3b61ddb26545e4)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In ToasterTables with multiple columns which allow filtering
(e.g. all builds), selecting one filter, then a second filter
(e.g. selecting "failed builds" then "outcome" for all builds),
would result in both filters being highlighted at the same time.
Fix this by removing the "active" highlight on all column filter
buttons when a new filter value is submitted (via the filter modal).
NB to enable this, added a data-filter-on attribute to all
column filter buttons to make them easy to select.
[YOCTO #8738]
(Bitbake rev: 7347ad0d4baace593751b44a86ab8e11a04a02b6)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The filter code for ToasterTable was difficult to follow
and inflexible (not allowing different types of filter, for example).
Refactor to a set of filter classes to make the structure cleaner
and provide the flexibility needed for other filter types
(e.g. date range filter).
[YOCTO #8738]
(Bitbake rev: 94031bb30bdaf665d0c8c68b591fcb7a17b6674d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For better long-term maintainability, use ToasterTable instead
of Django template and view code to display the all builds page.
NB the builds.html template has been left in, as this will
otherwise cause conflicts when merging the new theme.
[YOCTO #8738]
(Bitbake rev: e0590fc8103afeb4c5e613a826057555c8193d59)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libtoaster.js binds to hover help elements via their hover() and
mouseout() methods. However, any elements added to the DOM after
libtoaster has initialised will not have these bindings added.
This causes a problem for ToasterTables which have hover-help
elements (e.g. the builds/ table).
Use the on() method instead. This uses event delegation to bind
a handler to any th or td elements already in the DOM, or
which will be added to the DOM in future. ToasterTables can
now reconstruct the table DOM and still have the correct handlers
attached once the table is done.
[YOCTO #8738]
(Bitbake rev: 1f3ff01fed0b4de8721191f108033ad044cdc26a)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the old projects page and replace with the new
ToasterTable-based version.
NB although the projects.html template is no longer required,
it's been left in as there will be changes applied to it for
the new theme. These changes will have to then be transferred
from the projects.html template to projects-toastertable.html.
Similarly, the code for the projects page in views.py has been
retained.
[YOCTO #8738]
(Bitbake rev: ebe7831ef65e78a9d100f29a63311518577fc838)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The algorithm for finding the suffix for image files produced by
the build doesn't reference a list of known file suffixes, so
could be prone to error.
Modify how file suffixes are parsed from the file path so that
they are compared against a list of known types; if this fails,
use the part of the basename of the file path after the first
'.' character.
Also rationalise the places in the views code where we
extract the file name extensions for builds, so they both use
the same algorithm (before, the same code was duplicated in
two places).
[YOCTO #8417]
(Bitbake rev: dd1c509696b8ab5e593cc64637060a58e95fcd1f)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Image file suffixes are used in the project configuration page to
show a list of available image file types. This list is stored
as a function in the views code.
However, this list is also needed when parsing image file paths,
so that the suffixes can be shown in the "all builds" and "project
builds" tables.
Move the list of valid image file suffixes to the Target_Image_File
class to make is accessible in other places where it may be needed.
[YOCTO #8738]
(Bitbake rev: c2f20232077917552623fd0726d0820e50b04cae)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The projects page uses the old approach for showing tables,
which means a template for each table. This means that applying
changes to ToasterTable (which is used for most tables) has
no effect on the layout, styling and behaviour for these older
tables, and requires additional duplicated effort.
Move the projects page to use ToasterTable instead, to remove
the duplication of effort.
[YOCTO #8738]
(Bitbake rev: df56a35bc71639457329c4b58839976c5ee40106)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
servers"
This reverts commit 4193e99adce8e88f12ac88d7578ad39575f7e346.
It seems the underlying issue was caused by ":" in the url which isn't
supported. The patch was therefore incorrect.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit e130dca85bac82bd4d88f94a6bf9fe36e8ad4d7c.
This is in fact a valid use case, for example the sstate.bbclass code
sets up SSTATE_MIRRORS as PREMIRRORS. Its quite common to map those
file:// urls to remote http:// urls and with the above change, this
no longer works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This goes undetected most of the time, but when updating a repository,
if the ud.fullmirror file is not present, you end up getting an
exception instead of carrying on because the errno module is not
loaded (specifically "if exc.errno != errno.ENOENT").
(Bitbake rev: e6fca8480731ce817df9bee61438347a5e3d3017)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'stamp-base' and 'stamp-base-clean' related codes are no longer useful,
clean them up.
[YOCTO #8468]
(Bitbake rev: 7b4c42b315d4a26dd8f2ceb874a94737bf9f183e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Debugging suggests that setscene tasks are being a little greedy about their
dependencies, for example, lsof is insisting that gcc-runtime's do_package
is installed. If it isn't, its requiring gcc to rebuild.
If gcc-runtime do_package_write_xxx and do_packagedata is available, there
is no reason do_package should be needed.
The reason this is happening appears to be from the batching up of task
dependencies code, rather than setscene tasks stopping when passing over
a setscene task, they were being carried forward. This patch fixes it
so the data is 'zeroed' when passing over a setscene task boundary,
which gives the dependency graph that is expected.
After this patch, lsof will rebuild quite happily without
gcc-runtime:do_package being present, as expected. This should lead to
less dependencies being installed for builds from sstate and generally
better performance in general.
(Bitbake rev: f8bcb0a1e3b008b71c9a7cd21f76d0906f2d8068)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the default toaster cache dir unique to the user running
toaster. If we have multiple users running toaster we previously
got a permission denied exception on saving a cache file.
[YOCTO #8782]
(Bitbake rev: 5207abdf58019271bf92bff4bcce3911b8691508)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Showed '<dependency> satisfied via <provider>' text and
help tooltip for the reverse build dependencies provided
through 'PROVIDES' in the 'Reverse build dependencies' tab.
[YOCTO #6169]
(Bitbake rev: c7bb98e2e2111790ded86087b13c8b49462d6b75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Showed '<dependency> satisfied via <provider>' text and
help tooltip for the build dependencies provided through
'PROVIDES' in the 'Build dependencies' tab.
[YOCTO #6169]
(Bitbake rev: de77e338fe70341fe98561e2e40b534f5c88db10)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Showed list of names that recipe provides.
(Bitbake rev: 60318c9a049292bd33322d8446a629d778337e8a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added new entries to Provides model and link them to
Recipe_Dependency using 'via' field.
This data will be used by Toaster UI to show 'Provides:'
information for the recipes.
[YOCTO #6169]
(Bitbake rev: 336ddc8df611d4c8f1c3d3a06d0a85bb544c38bc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added new model Provider and a foreign key 'via' to link
Recipe_Dependency to it.
[YOCTO #6169]
(Bitbake rev: e45fff6314741d46e2549b2f72ed380cbbb95593)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used providermap in store_dependency_information function
to find virtual dependencies. This should fix annoying
warnings "stpd: KeyError saving recipe dependency"
[YOCTO #6169]
(Bitbake rev: 85c416ca338c886db6e79651e44727482df9fb07)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added providermap information to the result of buildDependTree API.
This will be used by Toaster to map virtual dependencies to recipes.
(Bitbake rev: d3e07368549f30265f59846a260efa8230a225ca)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added optional parameter 'prefix' to filter out names that
don't start with specified prefix. Changed existing call
of get_providermap according to changed API.
Optimized the code: got rid of extra loop and temporary
list variable virts.
(Bitbake rev: df5a1392d6f91ccb44a99721c7d847da242121bb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its turning out that we really need a way to have bitbake just run
the setscene tasks but not any real tasks, particularly for SDK
operations.
Add an option for this since its pretty straight forward. This allows
various nasty workarounds in OE-Core to be removed.
(Bitbake rev: e4a2aafa1650a227a04d92a8a0b31efaed2c310e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some servers, e.g. bitbucket.org can't cope with ssh:// as part of
the git url syntax. git itself is happy enough with this but you
get server side errors when using it.
This changes the git fetcher to use the more common ssh url format
which also means we need a : before the path.
Seems a shame to have to do this due to broken servers however
it should be safe enough since this other form is the one most people
use on the commandline so it should be safe enough.
[YOCTO #8864]
(Bitbake rev: 4193e99adce8e88f12ac88d7578ad39575f7e346)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
TERM=dumb bitbake X
shows no output for task status which is suboptimal. Use the non-interactive
mode if the terminal doesn't support what we need for interactive mode giving
a better user experience. Also print a note to the console to say this has
happened.
[YOCTO #8768]
(Bitbake rev: 6f84cf4bd77f35fcd07e0b2f5149f1d6866a414d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The documentation for findFilesMatchingInDir() was inconsistant with the
implementation: the regex was escaped before searching so effectively it's a
pure textual substring, and the machine example was broken.
(Bitbake rev: 6bef981488ec94b46dbe3797acfecf9c4b6ecbbc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
No point counting all instances when we just want to know if there's any or not.
(Bitbake rev: 3369072efb653339da8dbd1ca864ff8e1ff899ca)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Where we add in mappings for EXPORT_FUNCTIONS, add dummy filename
and lineno data so ensure the assumption that all python functions
have this is correct.
(Bitbake rev: 547128731e62b36d2271c4390b3fee2b16c535dc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Olof Johansson
Ed Bartosh
Richard Purdie
Elliot Smith
Kristian Amlie
Chen Qi
Michael Wood
Ross Burton