Age | Commit message (Collapse) | Author |
|
This allows oe-selftest to take a -j option which specifies how much test
parallelisation to use. Currently this is "module" based with each module
being split and run in a separate build directory. Further splitting could
be done but this seems a good compromise between test setup and parallelism.
You need python-testtools and python-subunit installed to use this but only
when the -j option is specified.
See notes posted to the openedmbedded-architecture list for more details
about the design choices here.
Some of this functionality may make more sense in the oeqa core ultimately.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently some tests run in buffer mode and some don't. Those that don't can
corrupt stdout/stderr. Switch to using buffer mode everywhere so we're consistent.
If there is useful output on stdout/stderr, it will be displayed if the test
fails.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current code assumes if something isn't a failure of some
kind, it was a pass. When test case IDs weren't matching, this lead
to very confusing output where things would fail, then be listed as
passing.
This adds code to track successes, ensuring we don't end up in this
position again with unmatched entries being listed as UNKNOWN.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can directly compare the test case IDs rather than representations,
then if we're using subunit to split the tests, the comparisions still
work as intended.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running testimage task for core-image-sato-sdk, the following
error appeared.
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x82 at position 0: invalid start byte
Checking the codes, I found it's caused by setting a 1024 limit for the
read method of the StreamReader object.
Comments from the manual:
"""
The chars argument indicates the number of decoded code points or bytes to
return. The read() method will never return more data than requested, but
it might return less, if there is not enough available.
"""
When running `systemctl status --full' on target, this error occurs.
This patch increase the bytes limit to 4096 to fix the error.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The var might not be set, resulting in unexpected error.
RESULTS - multilib.MultilibTest.test_check_multilib_libc - Testcase 1593: ERROR
The above error is due to MULTILIBS being not set, which is the default
for OE. This patch fixes this problem.
Also, the debugging message in skipIfNotInDataVar is currently confusing.
Instead of
DEBUG: Checking if 'MULTILIBS' value is in 'multilib:lib32' to run the test
it should be
DEBUG: Checking if 'MULTILIBS' value contains 'multilib:lib32' to run the test
This patch also fixes it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use 'cls' instead of 'obj' to better reflect that registerDecorator
actually serves as a class decorator.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OETestFilter is a subclass of OETestDecorator. It wants to make
use of @abstractmethod decorator. But such decorator requires
metaclass to be ABCMeta to have effect. So add it now to achieve
the designed behaviour.
Comments from python's manual:
"""
Using this decorator requires that the class's metaclass is ABCMeta
or is derived from it.
"""
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In previous OEQA, having 'auto' in TEST_SUITES results in executing
as many test cases as possible.
This behaviour is broken for now. From the codes in core/loader.py,
I can see that it tries to use another keyword 'all'. But in fact,
it does not work.
I've checked the current manual. The manual says using 'auto'.
Below is the current information in manual.
"""
Alternatively, you can provide the "auto" option to have all applicable
tests run against the image.
TEST_SUITES_append = " auto"
"""
So we should restore this behaviour. This patch does so.
Also, output warning message is some module is named as 'auto', as this
is a reserved keyword.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some test cases (eSDK.oeSDK*, runtime_test/*) does not match
with current regex, fix it accept all.
[YOCTO #12385]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since we are depercating the ELF image type, we should not test it
here either.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The value could be False in which case we should pass that through.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This ensures the console is kept clear of confusing output but that
the main logs contain good debugging information.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The logger handling in oeqa was confused at best. This patch:
a) Passes in a logger through various qemu runner pieces
b) Uses that logger consistently in the code
c) Creates a logger for QemuRunner outside the bitbake namespace
meaning we don't conflict with the tinfoil logging changes
The result of this is more consistency. For runtime tests in testimage,
the logs always contain the debug info, nothing is shwon on the console.
For the oe-selftests, logs are intercepted and only shown if the test
fails.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In general we don't need to see the output of runqemu however if it fails
we do. Use the buffer option that already exists in TestResult but allow
us to trigger it on a per test basis.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For test modules in a package, e.g., oelib.license, running
`oe-selftest -r oelib.license` or `oe-selftest -r
oelib.license.TestSimpleCombinations` would fail with a message that
the specified test cases could not be found. This was due to the
parsing in _built_modules_dict(), which failed to distinguish between
<package>.<module>.<class> and <module>.<class>.<testcase> and treated
both cases as the latter.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This can avoid UnicodeDecodeError error.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There might be wild strings when read from target (especially when
reading ptest results), replace the errors to avoid breaking the test.
Fixed: (Not always happen)
$ bitbake core-image-sato -ctestimage
[snip]
status, output = self.target.run('ptest-runner', 0)
File "/buildarea/lyang1/poky/meta/lib/oeqa/core/target/ssh.py", line 84, in run
status, output = self._run(sshCmd, processTimeout, True)
File "/buildarea/lyang1/poky/meta/lib/oeqa/core/target/ssh.py", line 55, in _run
status, output = SSHCall(command, self.logger, timeout)
File "/buildarea/lyang1/poky/meta/lib/oeqa/core/target/ssh.py", line 258, in SSHCall
run()
File "/buildarea/lyang1/poky/meta/lib/oeqa/core/target/ssh.py", line 236, in run
output = process.communicate()[0].decode("utf-8")
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc3 in position 4906: invalid continuation byte
[YOCTO #11547]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A new command line argument (-R, which is the oposite of current -r) that allows
to run all test cases except the ones indicated through the command line.
Some command line examples:
* Run all except the distro test case:
$ oe-selftest -R distrodata
* Run all except the archiver test case and a single bblayers unit test
$ oe-selftest -R archiver bblayers.BitbakeLayers.test_bitbakelayers_add_remove
[YOCTO #11847]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since OEQA framework uses Python logging functionality to report test
results there is a class that wraps PyUnit writes into logging commands
(OEStreamLogger), so don't buffer the actual test execution to have
insight of what is currently executing.
This fix will change a little the test output format adding an '\n'
previous the test result, for example:
From:
test_nonmatching_checksum (lic_checksum.LicenseTests) ... ok
To:
test_nonmatching_checksum (lic_checksum.LicenseTests)
... ok
This is because the new line added by the PyUnit StreamLogger because
currently we don't have a manner to identify when a test execution
starts at report level (write msg).
[YOCTO #11827]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
found
If some test module/case is specified to run and isn't found the OEQA
framework didn't notice it, so complete the implementation using
modules_required and validate for the test case prescense.
Raise an exception when the test module/case required isn't found.
[YOCTO #11645]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python versions has different features from branches 3.4.x, 3.5.x and
3.6.x, i expected in wrong mode that was incremental for example changes
in 3.4.4 be in 3.5.x but that's not true.
The _make_failed_test internal method differs and is only available in
certain versions >= 3.4.4 and in 3.5.x and 3.6.x branches but not
realeses have been made including it.
So to avoid futher problems inspect the _make_failed_test and generates
function definition according what parameters are needed, the unique
supossition is that exception argument is always passed.
Related to,
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=d8380d098a290510b442a7abd2dd5a50cabf5844
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Python unittest change the signature of the _make_failed_test
after python 3.4.4 don't pass the method name.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The small module name was added to support run a whole suite that
has more that 3 levels in the test case name, but this broke the
behaviour for use a full test case name.
[YOCTO #11632]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The details of a test failure is upper on the unittest output
so don't log twice the actual failure.
[YOCTO #11622]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently there was a restriction to only execute tests that's
inherits from OETestCase but in some circunstancies the features
from the OEQA framework isn't needed so we need to support
basic unittests.
[YOCTO #10828]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Our filtering allows to specify which tests to run using,
<module_name>.[test_class].[test_name]
But the module name logic was restricted to only accept one level,
for example: runtime_test vs oelib.types, to support multiple
submodules use only the first part for filtering.
This allows to run the whole tests in a module with more than tree
levels.
Due to the ambiguity on the test filtering options with test cases
with more than tree levels the supported sytnax is,
<module>
or
<module>.[submoduleN].[test_class].[test_name]
[YOCTO #11632]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Is better to log the summary at end to see in an easy way
the actual result of the test run.
[YOCTO #11622]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
After Python 3.5 the init method contains initialization of
_loading_packages set to avoid infinite loops in recursive
loading.
Fix,
Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/scripts/oe-selftest", line 70, in <module>
ret = main()
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/scripts/oe-selftest", line 57, in main
results = args.func(logger, args)
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/context.py", line 214, in run
rc = self._internal_run(logger, args)
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/context.py", line 175, in _internal_run
self.tc.loadTests(self.module_paths, **self.tc_kwargs['load'])
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/core/context.py", line 51, in loadTests
self.suites = self.loader.discover()
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/core/loader.py", line 268, in discover
pattern='*.py', top_level_dir=path)
File "/usr/lib/python3.5/unittest/loader.py", line 341, in discover
tests = list(self._find_tests(start_dir, pattern))
File "/usr/lib/python3.5/unittest/loader.py", line 398, in _find_tests
full_path, pattern, namespace)
File "/usr/lib/python3.5/unittest/loader.py", line 473, in _find_test_path
self._loading_packages.add(name)
AttributeError: 'OETestLoader' object has no attribute '_loading_packages'
Signed-off-by: Anibal Limon <anibal.limon@linux.intel.com>
|
|
In order to maintain compatibility with oe-selftest, the
load_test_components needs to be re-used, so the script
executor needs to pass to only load components supported
by certain script (oe-test, oe-selftest).
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This pre runner will serve to allow Test components executes code
previously of the run a suite.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, the xml runner class prints out the docstring for every
unit test but it order to keep the same format as the standard
runner, avoid docstring output setting descriptions to False.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The OETestLoader.modules must be an iterable object, otherwise
checking presence of specific modules with the 'in' operator fails
with the following command/error:
% oe-test core
.. - core - INFO - Running bitbake -p
Traceback (most recent call last):
File "..poky2/scripts/oe-test", line 108, in <module>
ret = main()
File "..poky2/scripts/oe-test", line 93, in main
results = args.func(logger, args)
File "..poky2/meta/lib/oeqa/core/context.py", line 235, in run
self.tc.loadTests(self.module_paths, **self.tc_kwargs['load'])
File "..poky2/meta/lib/oeqa/core/context.py", line 53, in loadTests
self.suites = self.loader.discover()
File "..poky2/meta/lib/oeqa/core/loader.py", line 204, in discover
pattern='*.py', top_level_dir=path)
File "/usr/lib64/python3.4/unittest/loader.py", line 275, in discover
tests = list(self._find_tests(start_dir, pattern))
File "/usr/lib64/python3.4/unittest/loader.py", line 339, in _find_tests
yield self.loadTestsFromModule(module)
File "..poky2/meta/lib/oeqa/core/loader.py", line 266, in loadTestsFromModule
and module.__name__ in self.modules \
TypeError: argument of type 'NoneType' is not iterable
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Most of the text include on this text refactor came from [1].
[1] http://lists.openembedded.org/pipermail/openembedded-architecture/2016-December/000351.html
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will enable only run certain module tests and filter by
class and test name.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A common operation is to list tests, currently only selftest
support it, this changes enables this functionality into the
core framework.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add needed tests to validate the OEQA Threaded mode, the remaining
parts are tested by the OEQA without Threaded mode.
- test_loader.py: Add a test to validate rules when creating the
list of test suites.
- test_decorators.py: Add oetimeout test because the threaded mode
uses Timer instead of signal.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In python signals are only allowed to delivery into the main thread,
to support the threading mode test if the runner is threaded and
use threading.Timer instead.
There are some considerations like SIGALRM interrupts the execution
after N seconds but the Timer only starts a Thread to notice the
timeout and the exception will be raised when the test run ends.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The _skipTestDependency needs to know if the thread mode is
enabled because the _results are by thread.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This class sets the {loader,runner}Class to the threaded versions and
overrides loadTests method to be able specify the process_num.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The OETestRunnerThreaded overrides the run method of OETestRunner
it recieves a list of suites to be executed by a ThreadPool.
The new run method handles the ThreadPool creation and the
OETestResultThreaded fill.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The OETestResultThreadedInternal extends OETestResult to stores
results by Thread.
The OETestResultThreaded is a simple class that provides the
implementation of interfaces needed by outside like wasSuccesful,
stop, logSummary, logDetails.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This method is to assign results into the TestContext, create
an internal one to support change implementation in Thread version.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The OEStreamLoggerThreaded overrides OEStreamLogger to redirect
the PyUnit output to a logger.
Instead of log every line when comes the OEStreamLoggerThreaded
will buffer the PyUnit output and write everything at end of every
suite execution to don't have mixed suite outputs.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The threded module will implement Thread support into the OEQA
framework.
The OETestLoaderThreaded overrides discover to return a list of
suites every suite will be run by a separate Thread.
Some design considerations are:
- All the tests of a certain module needs to be run at one thread
because unittest framework needs to keep track of setUp{Module,
Class,} and tearDown{Module, Class,}.
- Tests that depends on other needs to be run at the same thread
because OEQA framework look at the status of dependant test to
decide if skip or not, this constraint can be change in the future
but a sync mechanishm is needed to implement between the Threads.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Those methods are used to write in the log the results so
it makes sense to have defined at OETestResult because
is a format of the result itself.
[YOCTO #11450]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|