| Age | Commit message (Collapse) | Author |
|---|
|
The warnings deal with two specific cases of failure:
1) unable to execute nativesdk postinsts for mingw SDKs because
they need to be run under wine
2) unable to execute target postinsts when there is no qemu
usermode support for the target
Neither of these should be a big problem as mingw issue was never
found to problematic, and target postinsts deal with things that
are needed at runtime and not at build time which is the purpose
of SDKs.
The specific reason to do this is to reduce the amount of warnings
shown by the Yocto autobuilder, to zero eventually.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The parent code currently assumed that any parent branch is locally
checked out which may not be the case.
Use the local branch by default but fall back to the origin. This
also means removing the later saftey check as the branch may not exist
locally.
This fixes the autobuilder resulttool test pushing code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a combined patch of the various tweaks and improvements I
made to resulttool:
* Avoid subprocess.run() as its a python 3.6 feature and we
have autobuilder workers with 3.5.
* Avoid python keywords as variable names
* Simplify dict accesses using .get()
* Rename resultsutils -> resultutils to match the resultstool ->
resulttool rename
* Formalised the handling of "file_name" to "TESTSERIES" which the code
will now add into the json configuration data if its not present, based
on the directory name.
* When we don't have failed test cases, print something saying so
instead of an empty table
* Tweak the table headers in the report to be more readable (reference
"Test Series" instead if file_id and ID instead of results_id)
* Improve/simplify the max string length handling
* Merge the counts and percentage data into one table in the report
since printing two reports of the same data confuses the user
* Removed the confusing header in the regression report
* Show matches, then regressions, then unmatched runs in the regression
report, also remove chatting unneeded output
* Try harder to "pair" up matching configurations to reduce noise in
the regressions report
* Abstracted the "mapping" table concept used to pairing in the
regression code to general code in resultutils
* Created multiple mappings for results analysis, results storage and
'flattening' results data in a merge
* Simplify the merge command to take a source and a destination,
letting the destination be a directory or a file, removing the need for
an output directory parameter
* Add the 'IMAGE_PKGTYPE' and 'DISTRO' config options to the regression
mappings
* Have the store command place the testresults files in a layout from
the mapping, making commits into the git repo for results storage more
useful for simple comparison purposes
* Set the oe-git-archive tag format appropriately for oeqa results
storage (and simplify the commit messages closer to their defaults)
* Fix oe-git-archive to use the commit/branch data from the results file
* Cleaned up the command option help to match other changes
* Follow the model of git branch/tag processing used by oe-build-perf-report
and use that to read the data using git show to avoid branch change
* Add ptest summary to the report command
* Update the tests to match the above changes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OEQA outputs test results into json files and these files were
archived by Autobuilder during QA releases. Example: each oe-selftest
run by Autobuilder for different host distro generate a
testresults.json file.
These scripts were developed as a test result tools to manage
these testresults.json file.
Using the "store" operation, user can store multiple testresults.json
files as well as the pre-configured directories used to hold those files.
Using the "merge" operation, user can merge multiple testresults.json
files to a target file.
Using the "report" operation, user can view the test result summary
for all available testresults.json files inside a ordinary directory
or a git repository.
Using the "regression-file" operation, user can perform regression
analysis on testresults.json files specified. Using the "regression-dir"
and "regression-git" operations, user can perform regression analysis
on directory and git accordingly.
These resulttool operations expect the testresults.json file to use
the json format below.
{
"<testresult_1>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
...
"<testresult_n>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
}
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To store test result from oeqa automated tests, execute the below
$ resulttool store <source_dir> <git_branch>
To merge multiple testresults.json files, execute the below
$ resulttool merge <base_result_file> <target_result_file>
To report test report, execute the below
$ resulttool report <source_dir>
To perform regression file analysis, execute the below
$ resulttool regression-file <base_result_file> <target_result_file>
To perform regression dir analysis, execute the below
$ resulttool regression-dir <base_result_dir> <target_result_dir>
To perform regression git analysis, execute the below
$ resulttool regression-git <source_dir> <base_branch> <target_branch>
[YOCTO# 13012]
[YOCTO# 12654]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions can be reused by the resulttool code so move to the common
function library for this purpose.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During the test logrotate.LogrotateTest.test_1_logrotate_setup,
there is below logic:
# mkdir $HOME/logrotate_dir
# sed -i "s#wtmp {#wtmp {\n olddir $HOME/logrotate_dir#" /etc/logrotate.d/wtmp
After all logrotate.LogrotateTest finished, only cleanup
$HOME/logrotate_dir as below, but don't restore
the config file /etc/logrotate.d/wtmp.
[snip]
def tearDownClass(cls):
cls.tc.target.run('rm -rf $HOME/logrotate_dir')
[snip]
That's to say, there is one additional line added
to /etc/logrotate.d/wtmp and will make the logrotate
service start failed when run systemd.SystemdBasicTests.test_systemd_failed
Take an example as below when run test as root:
# cat /etc/logrotate.d/wtmp
# no packages own wtmp -- we'll rotate it here
/var/log/wtmp {
olddir /root/logrotate_dir
missingok
monthly
create 0664 root utmp
minsize 1M
rotate 1
}
# ls /root/logrotate_dir
ls: cannot access '/root/logrotate_dir': No such file or directory
# systemctl start logrotate
Job for logrotate.service failed because the control process exited with error code.
See "systemctl status logrotate.service" and "journalctl -xe" for details.
# systemctl status logrotate
logrotate.service - Rotate log files
Loaded: loaded (/lib/systemd/system/logrotate.service; static; vendor preset>
Active: failed (Result: exit-code) since Wed 2019-02-13 03:35:19 UTC; 7s ago
Docs: man:logrotate(8)
man:logrotate.conf(5)
Process: 540 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=1/FAILURE)
Main PID: 540 (code=exited, status=1/FAILURE)
Feb 13 03:35:18 qemumips systemd[1]: Starting Rotate log files...
Feb 13 03:35:19 qemumips logrotate[540]: error: wtmp:9 error verifying olddir path /root/logrotate_dir: No such file or directory
Feb 13 03:35:19 qemumips logrotate[540]: error: found error in file wtmp, skipping
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Main process exited, code=exited, status=1/FAILURE
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Failed with result 'exit-code'.
Feb 13 03:35:19 qemumips systemd[1]: Failed to start Rotate log files.
Add the logic to restore /etc/logrotate.d/wtmp to
make the cleanup complete to fix the above issue.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This turns the core of the script into a library function. Ultimately this
will let us call that code with custom 'keywords' rather than relying
on the data parsed from bitbake metadata which can't be used when archiving
historical results.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If large results values are returned by the subprocesses, we can hit a deadlock
where the subprocess is trying to write data back to the parent, the pipe is full
and the parent is waiting for the child to exit.
Avoid this by calling the update() method which would trigger reading a result
from the child, avoiding the deadlock. The issue is described in
https://bugs.python.org/issue8426
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
QA team found that 10 manual bsp test cases from Testopia for
Beaglebone, EdgeRouter, and MPC need to be up streamed
[YOCTO #12650]
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix another load of regex escape sequence warnings for newer
python versions.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
oe.utils.packages_filter_out_system() returns PACKAGES after removing "system"
packages but it doesn't handle ${PN}-src as generated by
PACKAGE_DEBUG_SPLIT_STYLE=debug-with-srcpkg.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, BAD_RECOMMENDATIONS on the opkg backed relies on editing the
opkg status file (it sets BAD_RECOMMENDATIONS pkg want state to
deinstalled and pinned). This is brittle, and not consistent across the
different solver backends. Use new --add-ignore-recommends flag instead.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use prelink only when image-prelink class is inherited. Inheriting this
class adds prelink-native as dependency to do_rootfs, which makes prelink
binary and configuration available.
|Exception: FileNotFoundError: [Errno 2] No such file or directory:
|'/home/.../1.0-r0/recipe-sysroot-native/etc/prelink.conf'
|
| if not os.path.exists(prelink_cfg):
| shutil.copy(self.d.expand('${STAGING_DIR_NATIVE}${sysconfdir_native}/prelink.conf'),prelink_cfg)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit b95b6ba1a2959e2294a8848fa35f20163388eb06 changed package_ipk.bbclass
to xz when building packages. This updates OpkgDpkgPM.extract() accordingly.
Signed-off-by: Angus Lees <gus@inodes.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recent version of tmux seems to use PWD from the environment instead of the
actual working directory. Help it use the correct path.
Fixes setting the correct working directory when running
devshell and menuconfig tasks.
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With newest Python, the following is printed:
PyGIDeprecationWarning: GObject.markup_escape_text is deprecated; use GLib.markup_escape_text instead)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently processed being killed by the OOM killer may not be spotted by
ptest-runner. After we complete the tests, check the logs and report if there
were any. This ensures the user is aware of OOM conditions affecting the
ptest results.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fixes:
DEBUG: [Running]$ ssh -l root -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.4 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; perl -e '$_="Uryyb, jbeyq"; tr/a-zA-Z/n-za-mN-ZA-M/;print'
| DEBUG: time: 1548816904.4024463, endtime: 1548817204.397057
| DEBUG: Partial data from SSH call: ssh: connect to host 192.168.7.4 port 22: Connection refused
for master/thud/sumo
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes we meet the following failure for the test_lookup_recipe
test case.
AssertionError: 'zlib\nbusybox is in the RPROVIDES of target-sdk-provid[32 chars]ummy' != 'zlib\nbusybox'
zlib
+ busybox- busybox is in the RPROVIDES of target-sdk-provides-dummy:
- target-sdk-provides-dummy
This is because target-sdk-provides-dummy rprovides busybox.
So clean things up to avoid failure.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Get rid of further unneeded code complications:
* value mappings we could just direct use
* ftools when we can write files easily ourself
* test result status filtering we don't use
* variable overwriting module imports
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Merge the results handling into the ptest log parser as a seperate
method.
Drop the weird "pass.skip.fail." prefix to the results filename, its
just bizarre.
Drop the code turning a list into a regex then searching the regex for
an item, "x in y" is perfectly capable.
Use a dict, sort the keys as needed and drop the list sorting code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow parsing of the ptest duration, exit code and timeout keywords
from the logs, returning data on each section.
Also include the logs broken out per section.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now we have a dedicated ptest parser, merge in the remaining ptest
specific pieces to further clarify and simplify the code, moving to
a point where we can consider extending/enhancing it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rename the paster to be ptest specific and apply some further cleanups
to the code to simplify and clarify what its doing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
logparser is only used by ptest. Its slightly overcomplicated as it was
intended to be reusable but wasn't. Simplify it as a dedicated parser is
likely to me more readable and maintainable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some tests end up without a section, avoid tracebacks trying to use
None as a string in that case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Manual test step for SDK is updated. Previously toolchain was "poky-glibc-x86_64-core-image-sato-sdk<type-arch>-toolchain-<release-version>.sh"
But toochain for core-image-sato-sdk is not available in releases after 2.1, hence changed it to "poky-glibc-x86_64-core-image-sato-<type-arch>-toolchain-<release-version>.sh
Other less significant update is to add exepcted result in intermediate test steps.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
"poky-glibc-x86_64-core-image-sato-<type-arch>-toolchain-<release-version>.sh"
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added json file for compliance test cases to the manual runtime tests
Signed-off-by: Sudhir Sharma <sudhirx.sharma@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes the default PACKAGE_DEBUG_SPLIT_STYLE to generate separate
source and debug packages. SDKIMAGE_FEATURES is updated to include the
source packages so that there is not change for the SDK contents.
[YOCTO #12931]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a SRC_URI content ends with '.patch' bitbake is
trying to apply it as it's a patch file.
It causes that if we use git repository for 'patch' package
the bare clone is extracted to a directory
(i.e. build/downloads/git2/git.mirror.org.patch/) which is considered
to be a patch file, so patch.py tries to apply that directory as a patch
which ends up with a failure.
Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If it's not a patch the function returns nothing.
Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously this was done via bitbake tasks, and when this
was rewritten to a for loop, performance sufered significantly:
from 90 seconds to about 12 minutes for oe-core. This change
restores the previous run time, and makes it possible
to perform such checks with command line utilities in an
interactive way.
Implementation note: we have to create a copy of the recipe
data, as Tinfoil API can't be used from multiple threads
and only allows one process to access the data at a time.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is particularly useful when setting up GL tests.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
nativesdk
The few cases where they failed should be now all fixed. The only allowed
exception is when building mingw32 SDKs, as there is currently no support for running
postinst_intercepts through wine.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When executing eSDK test case, the following error appears.
WARNING: attempting to use the extensible SDK in an environment
set up to run bitbake - this may lead to unexpected
results. Please source this script in a new shell session
instead.
FileExistsError: [Errno 17] File exists: '/.../tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/selftest-esdk-fcuyzsqu/tmp/sysroots/x86_64/bin/pigz' -> '/.../tmp/hosttools/pigz'
So unset these two vars to avoid messing things up.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When removing the temporary directory, it's possible that bitbake.lock
file is removed by bitbake during the cleanup. And this leads to the
following error.
FileNotFoundError: [Errno 2] No such file or directory: 'bitbake.lock'
So add a check to remove this file before cleaning up the temporary
directory.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updates the output hash calculation for determining if tasks are
equivalent. The new algorithm does the following based on feedback:
1) The output hash function was moved to the OE library.
2) All files are printed in a single line tabular format
3) Prints the file type and mode in a user-friendly ls-like format
4) Includes the file owner and group (by name, not ID). These are only
included if the task is run under pseudo since that is the only time
they can be consistently determined.
5) File size is included for regular files
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A new commit was introduced to kernel, which caused kprobe sample case
failed on arm.
[kernel commit: e46daee53bb50b, ARM: 8806/1: kprobes: Fix false positive
with FORTIFY_SOURCE]
And according to author, the case just works on x86 and powerpc.
So we just promise that the case can pass on x86 and powerpc.
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test case boots the image in qemu and checks for mounted partitions.
But the outputs of mount are different between sysvinit and systemd:
sysvinit:
/dev/root /\r\n/dev/sda1 /boot\r\n/dev/sda3 /media\r\n/dev/sda4 /mnt
systemd:
/dev/sda1 /boot\r\n/dev/sda2 /\r\n/dev/sda3 /media\r\n/dev/sda4 /mnt
So check mounted partitions by egrep rather than check output of runqemu.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using linux-yocto-dev, we will have one more amba error message
for qemuarm, so ignore it too.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix handling of escape characters in regexs and hence fix python
Deprecation warnings which will be problematic in python 3.8.
Note that some show up as:
"""
meta/classes/package.bbclass:1293: DeprecationWarning: invalid escape sequence \.
"""
where the problem isn't on 1293 in package.bbclass but in some _prepend to a
package.bbclass function in a different file like mesa.inc, often from
do_package_split() calls.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the code to match the recent switch to sha256 hashes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously there was lots of irrelevant noise in the logs,
because we also wanted to be able to debug postinst issues
easily. I have adjusted the logging levels so that
postinst info is still written to the logs, but other
things are not.
[YOCTO #13119]
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now we can compile m4-native rather than target m4, this can save a lot of
build time.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
The previous ccache.bbclass has the following problems:
- It uses host's ccache for native recipes, but this may not work on some
hosts, for example, it nerver works on my Ubuntu 14.04.4, there are always
build failures (m4-native failed at do_configure, and others will also be
failed if I disable CCACHE for m4-native)
- native/nativesdk/cross/crosssdk recipes use host's ccache, but target uses
ccache-native, this may confuse user.
- The target recipes may use both host's ccache and ccache-native, this may
cause unexpected problems and be hard to debug. This is because ccache-native is
in SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS, so ccache-native may not be present when
rebuild target recipes, and then it would use hosttools/ccache, but the
previous ccache files were generated by ccache-native.
- Target recipes can't use ccache when no ccache is installed on the host:
CCACHE = "${@bb.utils.which(d.getVar('PATH'), 'ccache') and 'ccache '}"
After refactored:
All types recipes (native, target and others) will use ccache-native except
ccache-native itself, host's cache won't be used any more. It is more
reliable now, which will work everywhere when ccache-native can be built.
And now we need use "CCACHE_DISABLE = '1'" to disable ccache for the recipe
rather than "CCACHE = ''" since we set CCACHE in anonymous function, and
d.getVar('CCACHE') works after "CCACHE ??=" which is set in bitbake.conf, so we
can't check whether CCACHE is set or not in anonymous function since it is
always set. Use CCACHE_DISABLE to disable it would be more clear.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently SDKIMAGE_LINGUAS is broken for any inputs except "all".
In the non-"all" case, each enabled language package is installed via
pm.install("nativesdk-glibc-binary-localedata-%s.utf-8" % lang)
This will throw a python exception since pm.install() expects a list of
strings and not a string.
Fix the problem by constructing a list.
That way it is now also possible to call the package installer just
once.
Cc: "Burton, Ross" <ross.burton@intel.com>
Fixes: 67615e01751b ("rootfs_rpm.bbclass: migrate image creation to dnf")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
And fix the reported upstream check failures.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Alexander Kanavin
Richard Purdie
Yeoh Ee Peng
Mingli Yu
Mazliana
Ross Burton
Alejandro del Castillo
Andrej Valek
Angus Lees
Jacob Kroon
Armin Kuster
Chen Qi
sangeeta jain
Sudhir Sharma
Joshua Watt
Tomasz Dziendzielski
Hongzhi.Song
Yi Zhao
Kai Kang
Robert Yang
Richard Weinberger