| Age | Commit message (Collapse) | Author |
|---|
|
It was used for building with glibc 2.20, now is glibc 2.23, so remove it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
(Resend as mailer munged previous submission. Also updated comments
to indicate problem is not limited to gcc 5.3.0.)
Adds -Wno-error=trampolines to native CFLAGS prevent multiple compile
errors when using gentoo builf of gcc.
[YOCTO #9201]
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the documentation needs to rebuild then it will fail as the syntax isn't
valid with modern texinfo. Backport a patch from git to fix the syntax.
[ YOCTO #9306 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
grub contains it's own internal lzma library. Attempting to build grub against
the system liblzma shared library or header files is not likely to end well.
This change does not cause a floating dependency since all grub2.inc based
recipes pass "--enable-liblzma=no" to configure.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
grub2 creates its own set of -nostdinc / -isystem / -ffreestanding
CFLAGS and OE's default BUILD_CFLAGS (assigned to CFLAGS for native
builds) etc, conflict with that.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The grub2 configure script uses variables such as TARGET_CFLAGS etc
for its own purposes. Remove the OE versions from the configure
environment to avoid conflicts.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is inspired by musl porting, where grub's configure is enabling
largefile support based on glibc versions, instead an upstream patch
turns it into autoconf check
Update git version recipe
arm platforms use this recipe to provide grub and it needed fixes from
upstream so upgrade to latest tip of git and forward port patches as
well as drop the ones already applied upstream
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The currnet patches in OE-core doesn't have the "CVE:"
tag, now part of the policy of the patches.
This is patch add this tag to several patches. There might
be patches that I miss; the tag can be added in the future.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=451d80e52d851432e109771bb8febafca7a5f1f2
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With the autodebug package generation logic, specifically setting FILES_${PN}-dbg
isn't needed in most cases, we can remove them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix a variety of problems such as typos, bad punctuations, or incorrect
Upstream-Status values.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current grub2 fails on loading large initrd file (> 500M) since
the initrd size is added to the addr_min and causes the failure.
Fix it by picking a patch from grub2 upstream.
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc-5 is stricter and complains about const to non-const
conversions, we backport the patch from upstream into 2.00
Change-Id: I17db365fdd253daaa1ab726e2a70ecad0ac7b2ae
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is same gnulib fix replicated across needed recipes
Change-Id: I756713407111a726eae98e26c9c1ff64981371c0
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We had PACKAGECONFIGs for grub_2.00 and grub_git, we also need them for
grub-efi, otherwise there might be failures as:
grub-2.00/util/grub-mount.c:37:23: fatal error: fuse/fuse.h: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when rebuild:
configure: error: source directory already configured; run "make distclean" there first
grub doesn't need bump since it always uses autotools (not
autotools-brokensep in the past).
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The tarballs of grub ship the files that are generated by autogen, so tarball
recipes don't need to depend on autogen-native (and thus guile-native).
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Make grub, grub-efi grub_git use a grub2.inc to reduce the duplicated code.
* Make grub and grub-efi use the same patches since they use the same
source. (grub_git is different).
* grub-efi:
- Use autotools to replace autotools-brokensep
- Remove the DEPENDS of freetype, it should be a RDEPENDS.
- Remove grub-2.00-ignore-gnulib-gets-stupidity.patch since it is a
duplication of remove-gets.patch.
- Make grub-efi.rpm contain files rather than make an empty package.
* grub_git:
- Fix a SSE build failure.
[YOCTO #6310]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
An issue was found where when yocto is installed to a hard disk
from a live USB key, no matter what boot order was selected in
the BIOS menu, the grub menu of the USB key would always show
up. The issue was narrowed down to the way grub configuration
file gets embedded into the standalone bootx64.efi image.
The commit prepends ($cmdpath) to the search path for grub.cfg,
thus making sure the UEFI environment itself sets this to the
correct device path. This in-turn lets the grub.cfg of the boot
device to be loaded.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Drew Moseley <drew_moseley@mentor.com>
Tested-by: Ravikiran Polepalli <Ravikiran_Polepalli@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is needed with glibc 2.20 since _BSD_SOURCE
macro is gone
Khem fixed grub, but the grub-efi also needs it, the patch can't apply
to grub-efi, so made a new patch for it.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is needed with glibc 2.20 since _BSD_SOURCE
macro is gone
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Avoid building and packaging of sparc64 specific files in the x86 builds.
Fixes Bug:
[YOCTO #6427]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A previously upstreamed patch has been applied. Bump the version to
incorporate this upstream update.
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix tftp stalls on loading files bigger than ~32k bug by cherry picking
a patch from grub upstream.
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch fixes a build warning which is promoted to an error via -Werror.
changes from v1:
* put "Upstream-Status" in patch itself, not in OE patch header
* fix commit wording
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous behavior defines a static set of modules that are built
into the grub efi executable. This works fine for a limited set of boot
environments namely the standard linux/initrd. This patch conditionally
assigns the same modules to a variable. This allows other meta layers
to add additional modules or completely override the defaults. The use
case driving this patch is the use of multiboot2 and related modules.
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Debugedit errors out on bare metal binaries. The first version of this patch limited it to 64 bit targets, but the problem now shows up on 32 bit targets (minnowboard) as well.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Exclude the .pc from po/POTFILES.in since quilt uses "patch --backup",
which will create the backup file under .pc, this may cause unexpected
errors, for example, on CentOS 5.x, if the backup file is null
(newfile), it's mode will be 000, then we will get errors when xgettext
try to read it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
grub-2.00-disable-help2man patches configure.ac to disable the help2man check
because we don't need the man pages. It also then patches configure itself so
that autogen.sh doesn't have to be called for performance reasons. However,
do_configure causes a full autoreconf so this optimisation is moot, and can
cause patch failures when an existing build tree is re-used.
Instead, simply use CACHED_CONFIGUREVARS to tell configure that it can't find
help2man.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop the 2 patches since the functionality is upstream now.
Also sync PACKAGECONFIG with grub 2.00 recipe.
The debugedit problem for 64 bit machines in do_package is still present, though:
ERROR: debugedit failed with exit code 256 (cmd was '/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit' -b '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux' -d '/usr/src/debug' -i -l '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/debugsources.list' '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module'):
/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module: Unhandled relocation 258 in .debug_info section
ERROR: Function failed: split_and_strip_files
ERROR: Logfile of failure stored in: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/temp/log.do_package.29234
ERROR: Task 10 (/build/linaro/build/openembedded-core/meta/recipes-bsp/grub/grub_git.bb, do_package) failed with exit code '1'
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Avoids it's auto-detected from sysroot, which will lead implicit results.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
liblzma5 is really requiring by grub, setting RDEPENDS to xz would pull
unneeded xz binaries into rootfs.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
-mcmodel=large is not supported by gcc with version lower
than 4.4, but we don't need to use memory over 4GiB, so add
a patch to allow compilation without large model support.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
To generate the target EFI image in a native package, it requires
the host gcc have the ability to do -m32/-m64 compiling, but gcc
doesn't have that support on the 32bit version of some distributions
(e.g. rehl, suse), it would fail when build a 64bit target on these
32bit hosts.
In fact, all we need from grub-efi-native is the grub-mkimage binary,
so change the solution to:
* grub-efi-native only install grub-mkimage
* grub-efi compiles target modules, generates EFI image
with grub-mkimage and deploy, but install nothing.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
grub requires bison and it will fail to configure on
the host without bison installed, add the dependency
to fix it.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
grub_2.0.0 requires xz to run or an error may occur.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This patch is originally from oe-classic, it seemed to
have been dropped in the transition for some reason.
However I needed this patch to boot a system with 256 byte
inodes.
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The iso9660 file system support needs to be added to grub in order to
be able to correctly find the grub.cfg. The grub commands to locate
the grub.cfg also needs to be encoded into grub's default
configuration.
This change allows the resulting grub binary to work both in the hard
drive / USB boot case or the optical media boot case.
[YOCTO #4100]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If do_patch re-executes, patching the configure script will fail because
it will have been regenerated during do_configure. We're patching
configure.ac so we don't need to patch configure anyway.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, the boot partition was created for the target hard drive
but there was no corresponding entry for it in /etc/fstab. Besides,
even if the boot partition was mounted, it would just result in odd
directory hierarchy like /boot/boot/grub. However, what we really need
is /boot/grub. This patch fixes this problem.
Besides, for future maintance work, this patch also renames some of the
intermediate directories. It uses more descriptive names like /tgt_root
and /src_root. The name of /ssd is dropped.
[YOCTO #5018]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The grub_fix_for_automake-1.12.patch replaced pkglib with pkgdata to
make grub_0.97 build with automake-1.12. However, it forgot to set up
the pkgdatadir, thus causing grub_0.97 not shipping files under /usr/lib.
This in turn resulted in an unworkable grub.
This patch fixes this problem by setting up the pkgdatadir correctly.
[YOCTO #4997]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
Robert Yang
Bill Randle
Ross Burton
Andre McCurdy
Khem Raj
Mariano Lopez
Awais Belal
Richard Purdie
Shan Hai
Arindam Nath
Nitin A Kamble
Trevor Woerner
Roy Li
Fathi Boudra
Max Eliaser
Philip Tricca
Koen Kooi
Saul Wold
Ming Liu
Koen Kooi
Jackie Huang
Jack Mitchell
Jason Wessel
Paul Eggleton
Chen Qi