Age | Commit message (Collapse) | Author |
|
Some previous version of this recipe was errantly removing the pygtk-2.0.pc
(pkg-config) file. This is needed for other packages to be able to build
against this library.
Also update the .pc file to match current pkg-config use (libdir was missing).
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backport patch from:
https://hg.python.org/cpython/rev/af46a001d5ec
SysLogHandler converts message to utf8 and adds BOM, supposedly
to conform with RFC5424, but the implementation is broken:
the RFC specifies that the BOM should prefix only unstructured
message part, but current Python implementation puts it in the
middle of structured part, thus confusing RFC-compliant receivers.
Signed-off-by: yzhu1 <yanjun.zhu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
variable contents are displayed properly when debugging qt applications remotely
see [1] for further details
[1] http://qt-project.org/doc/qtcreator-2.6/creator-debugging-helpers.html#debugging-helpers-based-on-python
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
opkg remove perl --force-removal-of-dependent-packages
...
Removing package perl-module-extutils-mm-dos from root...
...
Removing package perl-module-extutils-mm-dos from root...
You can force removal of packages with failed prerm scripts with the option:
--force-remove
No packages removed.
Collected errors:
* pkg_run_script: Internal error: perl-module-extutils-mm-dos has a
NULL tmp_unpack_dir.
* opkg_remove_pkg: not removing package "perl-module-extutils-mm-dos",
prerm script failed
...
While remove pkg with '--force-removal-of-dependent-packages',
pkg may be added to remove list multiple times, add status
check to make sure pkg only be removed once.
[YOCTO #6819]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
NEON instruction VLD1.64 was used to copy 64 bits data after type
casting, and they will trigger alignment trap.
This patch uses memcpy to avoid alignment problem.
Signed-off-by: Yuanjie Huang <Yuanjie.Huang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which
replaces all "ccache" including ones that consist of a full path.
This leads to build error when building in a project path with
"ccache" in its name. Fix it by only replacing "ccache " with
"$(CCACHE) ".
Same fix on python 2.xx is:
1181112cf65bc[python: do not replace ccache in the ]
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Apache Subversion 1.0.0 through 1.7.x before 1.7.17 and 1.8.x before
1.8.10 uses an MD5 hash of the URL and authentication realm to store
cached credentials, which makes it easier for remote servers to obtain
the credentials via a crafted authentication realm.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-3528
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The Serf RA layer in Apache Subversion 1.4.0 through 1.7.x before 1.7.18
and 1.8.x before 1.8.10 does not properly handle wildcards in the Common
Name (CN) or subjectAltName field of the X.509 certificate, which allows
man-in-the-middle attackers to spoof servers via a crafted
certificate.<a href=http://cwe.mitre.org/data/definitions/297.html
target=_blank>CWE-297: Improper Validation of Certificate with Host
Mismatch</a>
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-3522
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The 'dest' and 'src' can be same, we need to save the value of src32[2]
before swaping it.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gnu-config can't cope with a "make clean" so disable that
newly enabled functionality.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Additionally treat ld.so to be searched in sysroot
Change-Id: I8b4acb821d9855a1163c7149bc8e369c7c438856
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Various pieces of the code assume that the --sysroot option gets passed
into the compiler tools. By having a "sane" default, we don't always
spot when this occurs and this can later show up as breakage in sstate,
or in usage of the external toolchain.
We've long since talked about poisoning the default such that it will
break unless the correct option is specified. This patch does just that.
If this patch causes something to fail to build, it most likely means
the various compiler flags and commands are not correctly being passed
through to the underlying piece of software and that there is a real
problem that needs fixing, its not the fault of this patch.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch adds a flexible way to configure the CMake in SDKs. It adds
a toolchain configuration script which supports subscripts for
extensions, as for example Qt5.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of building specifiaclly for native a static fork of unifdef from
2007, simply package the latest tarball.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A regression is introduced by commit 66573093:
[ rpm: Fix rpm relocation macro usage ]
_usr turned out to be a relative path to support dyanmic config after
that, but it's being used somewhere as a indicator to locate substrings,
so we must get the real path of it in advance.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When building upower from meta-oe, the following QA error occurred:
ERROR: QA Issue: package upower contains bad RPATH
It appears to have been caused by one of the cases fix-final-rpath.patch
is meant to address but missed. So this change fixes the additional case
that was causing upower to have the QA error.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The do_rootfs takes a very long time when build host has mounted many NFS
devices. syscall lstat() was being called on every filesystem mounted on the
build host during building.
The reason for the lstat() is that rpm is verifying that enough free disk space
is available to do the install. However, since the install is into the target
rootfs it should not matter how much free space there is in the host mounts.
Add checking for "rpm-ignoresize", by it, smart can make whether RPM skip
checking for diskspace when install a rpm package.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When build fs with mtools-3.9.9, has file /usr/bin/lz in rootfs,
it is the symlink to uz:
root@qemu3:~# /usr/bin/lz
-sh: /usr/bin/lz: No such file or directory
$root@qemu3:~# ls -l /usr/bin/lz
lrwxrwxrwx 1 root root 2 Jul 18 18:07 /usr/bin/lz -> uz
root@qemu3:~# uz
-sh: uz: command not found
But the uz isn't actually exist, so the result is that lz is a
broken symlink.
The root cause is that uz hasn't been installed when install-scripts.
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
|
|
"file" command in exported SDK doesn't work:
...
$ file sysroots/
file: could not find any valid magic files!
...
In oe-core commit 68d548cbae729eaea8ce1403dc95ff63c4a7375c,
it added wrapper to file-native. Do the same thing for
nativesdk-file.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If DISTRO_FEATURES contains "largefile", force the size of off_t to 8 as
a workaround for having ac_cv_sizeof_off_t=4 on 32-bit systems. In
future we will likely drop the value from the site file, but for now
this is a slightly safer fix.
Fixes [YOCTO #6813].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This fixes gcc bug 6144, which in my case exhibited itself as a kernel
module that failed to load. This was because static platform_data
structures were being corrupted with the optimiser being set to any
value other than -O0.
Originally-submitted-by: Peter Urbanec <openembedded-devel@urbanec.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when MACHINE = qemux86-64 and libdir = /usr/lib64:
mv: cannot stat `/path/to/image/usr/lib64/perl-native/perl': No such file or directory
The perl-native files are always installed to /usr/lib on both 32/64
bits targets.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
systemd expects fsck programs to be located in /sbin and fails for
dosfstools with
| Checking was requested for ..., but /sbin/fsck.vfat cannot be used: No such file or directory
Other fsck programs (e.g. ext4) are located in /sbin already so move
vfat programs into this directory too.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
|
|
libffi is generally present as it's also a build dependency on glib-2.0, but
explicitly declare it for determinism.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The Makedoc.sh script uses the following line to set TMPDIR
export TMPDIR=`mktemp -d ${TMPDIR:-/tmp}/ldt.XXXXXXXXXX`;
and then later in the script:
chmod u+x $TMPDIR/linuxdoc
Since TMPDIR is not set the script will default to /tmp and if /tmp
is set to noexec (which is becoming more common), the chmod call fails.
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
pseudo 1.6.2 fixes problems with 64-bit inodes and some underlying issues
involving file renames that could occasionally cause very strange behaviors
files being deleted, linked, or renamed, mostly observed as strange
recovery if an inode got reused.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some architectures can mix different TARGET_OS values, in most cases
we just use one but in the ppc case, can use two different values. In this
case, to use one toolchain with both, we need to ensure the symlinks exist.
This isn't ideal but does fix the ppc toolchains for the release, after
which better ways of handling this can be investiaged. Without this, failures
in the C++ toolchain are seen.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is a proper sysroot specified in the meta-environment script now,
which isn't a bad thing. We adjust the sed expression to cope with this.
That means the SDK installations in non-default paths start to work again.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've been seeing an issue on the autobuilder due to the way it builds
package feed indexes. Packages get copied into the nightly build which
then creates indexes however this is done without the knowledge of
sstate. When adt-installer is built, it has dependencies on the toolchain
and when ipk files already exist, the build throws errors.
Since this recipe doesn't need a toolchain, we can remove the dependencies
to work around this for now. I'm not particularly happy with what the
autobuilder is doing but that is a post release issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #6476]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When rebuilding libxml-parser-perl with a change to libdir, you see strange
build failures due to MakerMake looking in strange library paths. The error
is obtuse and hard to track down. I'm therefore proposing we change the regexp
once and for all to resolve the issue. Currently it only does a replacement
once, this change ensures it always gets set the correct value upon rebuilds.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The various gdb variants overwrite in datadir so whitelist this for now, they
are the same files and this is not an issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
add patch to remove db3 from configure.ac
add inherit pkgconfig
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add DEPENDS for python-rpm package from either rpm4 or rpm5
Extend the smart-dflags patch to catch an exception if the api does exist
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since python-smartpm depends on python-rpm, we should provide here as appropriate.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify SPDX_S to the source tree of squashfs instead of ${S}.
Signed-off-by: leimaohui <leimaohui@cn.fujitsu.com>
|
|
APT before 1.0.4 does not properly validate source packages, which allows
man-in-the-middle attackers to download and install Trojan horse packages
by removing the Release signature.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-0478
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
|
|
Git perl tools such as add--interactive load the Git module at runtime.
A previous patch to eliminate a QA error by deleting it instead of
packaging it was incorrect.
beaglebone[62]$ git add -i
Can't locate Git.pm in @INC (you may need to install the Git module) (@INC contains: /usr/lib/perl/5.20.0 /prj/pab/Utils/lib/perl5/linux-arm/5.020000 /prj/pab/Utils/lib/perl5/ /prj/pab/Utils/lib/perl5/site_perl/linux-arm /prj/pab/Utils/lib/perl5/site_perl /etc/perl /usr/lib/perl/site_perl/5.20.0/ /usr/lib/perl/site_perl/5.20.0 /usr/lib/perl/vendor_perl/5.20.0/ /usr/lib/perl/vendor_perl/5.20.0 /usr/lib/perl/5.20.0/ /usr/local/lib/site_perl .) at /usr/lib/git/git-core/git-add--interactive line 7.
BEGIN failed--compilation aborted at /usr/lib/git/git-core/git-add--interactive line 7.
[YOCTO#3780]
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The perl patches have been copied to ptest directory and these patches in
target rootfs are linked to build dir. The ptest of perl doesn't need these
patches, so remove them from target.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
|
|
Building the tests for flex requires flex-native and bison-native, but the
attempt to add this dependency was done incorrectly. Use an inline python
conditional based on PTEST_ENABLED instead.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
|
|
There is a race where:
NOTE: recipe libgcc-initial-4.9.1-r0: task do_configure: Started
NOTE: recipe gcc-runtime-4.9.1-r0: task do_preconfigure: Started
| checking build system type... /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-deb/build/build/tmp/work-shared/gcc-4.9.1-r0/gcc-4.9.1/libgcc/../config.sub: line 1711: syntax error near unexpected token `;;'
| /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-deb/build/build/tmp/work-shared/gcc-4.9.1-r0/gcc-4.9.1/libgcc/../config.sub: line 1711: ` ;;'
| configure: error: /bin/bash /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-deb/build/build/tmp/work-shared/gcc-4.9.1-r0/gcc-4.9.1/libgcc/../config.sub x86_64-linux failed
| WARNING: exit code 2 from a shell command.
so we need to make sure the preconfigure task executes in all shared
work contexts.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add PACKAGECONFIG for acl/attr
and setting the default value to enable them
[ RB: fix PACKAGECONFIG assignment ]
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The patch is to split those perl scripts from the main package.
Add perl to RDEPENDS_i2c-tools-misc.
Signed-off-by: Michel Thebeau <michel.thebeau@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some macros have been added upstream and were not being executed, so refresh our
fork of this file.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The build system uses BUILD_CC itself now, so we don't need to do it manually.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|