Age | Commit message (Collapse) | Author |
|
Patch perl to allow builds to work where a native perl running against target modules
attempts to load a dynamic binary module. We assume that a native version of the
module exists as it would for the target and perform an appropriate path
substitution.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Apply the errno_ver.diff patch to the native perl version. This ensures that when
we're building target modules, running the native perl binary but in a target
configuration we don't see error messages.
libencode-detect-perl is a module which tests this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't want the perl module dependencies being added to each package
by rpmdeps because it causes too many problems when the modules aren't
available at install time (since they get added in do_package which is
too late for the build system to ensure they are available), and it
appears that the perl dependency gathering isn't working reliably in any
case judging by how they are detected on some build hosts and not
others.
This was being disabled previously but it seems like the macros moved
to a different file at some point and nobody noticed; thus make sure we
disable the macros in all RPM macro files.
Should fix [YOCTO #3699].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If configure of perl is reattempted it currently fails as it tries to edit
files outside ${S}. Chaging from ${WORKDIR} to ${S} avoids this issue
and allows rebuilds to work.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #3753]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this some software fails to build complaining it can't find these
utilities.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating guilt to allow git 1.8.x as a supported version. This version has
no impact on other functionality within the scripts, so no other adjustments
are necessary.
[YOCTO #3275]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It shows warning when bitbake perl:
WARNING: QA Issue: perl: Files/directories were installed but not
shipped
/usr/lib/perl/5.14.2/auto/XS/Typemap
That because file Typemap.so is not install correctly. Fix it.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
- add zlib to DEPENDS (it fails otherwise)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add obsolete_automake_macros.patch for both python-dbus and
python-pygobject that replace automake macros no longer supported
by automake-1.13 with modern constructs.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
1.The file of "apt.conf.sample" is in the outdir, and outdir is assigned
by "os.path.join" with the params of ${D}, ${sysconfdir} and "apt". But
${sysconfdir} is an absolute dir and that let ${D} be discarded.
The following is the help on function os.path.join(a, *p):
Join two or more pathname components, inserting '/' as needed.
If any component is an absolute path, all previous path components
will be discarded.
Use oe.path.join instead which don't have this problem.
2. Create apt.conf.sample if it doesn't exist.
[YOCTO #3677]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
pkg-config-native is useful when building a package for the target that needs to
compile a build-time tool, to avoid having to hard-code many paths.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
smart's "config" command uses the Python pprint module. If it is not
present, "config" fails with this error:
#############
# smart config --help
error: Invalid command 'config'
#############
This patch adds a dependency on python-pprint which fixes the error.
Tested on qemux86/core-image-sato-sdk.
[YOCTO #3643]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add explicit dependency for libpath.h on dynl.x which fixes a
potential parallel build issue.
[YOCTO #3558]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The perl-tests.inc file where using the constructs:
cp {a,b} to/
but this is not supported in every shell so we cannot use it. This
patch fixes it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
restore FILESPATH to previous setting because the new one doesn't allow the
normal use of FILESEXTRAPATHS_prepend in the case of append recipe.
In the current implementation, in fact, the FILESPATH is statically set into
the gcc-4.7.inc and so the base_set_filespath is not invoked to manage
extrapaths.
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove manpage creation. It wasn't working because of help2man
missing when bison is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove manpage creation. It wasn't working because of help2man
missing when libtool is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.
Removed prefix-manpage-fix.patch as only code it touched is being
removed by new dont-depend-on-help2man.patch
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The license file was updated with a "2012" in the "Copyright" line,
nothing else changed in the license text.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* fails to parse when http://patchwork.openembedded.org/patch/40997/ is used
Parsing recipes...ERROR: There is a confusing multiline, partially commented expression on line 10 of file
/OE/shr-core/openembedded-core/meta/recipes-devtools/perl/perl-rdepends_5.14.2.inc (| sed "s/\/.*\.pm: */ += /g;s/[\"\']//g;s/;.*/\"/g;s/+=
.*\(require\|use\)\> */+= \"perl-module-/g;s/CPANPLUS::.*/cpanplus/g;s/CPAN::.*/cpan/g;s/::/-/g;s/
[^+\"].*//g;s/_/-/g;s/\.pl\"$/\"/;s/\"\?\$/\"/;s/(//;" | tr [:upper:] [:lower:] \).
Please clarify whether this is all a comment or should be parsed.
ERROR: Unable to parse /OE/shr-core/openembedded-core/meta/recipes-devtools/perl/perl_5.14.2.bb: Exited with "1"
ERROR: Command execution failed: Exited with 1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Compatible with automake-1.13.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
python-libdir.patch and py-compile-only-optimized-byte-code.patch
updated to apply to new codebase.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix the following warning:
WARNING: QA Issue: rpm: Files/directories were installed but not shipped
/usr/lib64/rpm/bin/api-sanity-checker.pl
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Base on dependency create script provided by Saul, I update it with:
1 remove document strings in perl module files that may import fake
dependencies.
2 not all the 'use' or 'require' clauses start at the begin of line, and
some of them don't end with ';', such as:
use vars qw(
$AUTOLOAD
...
3 filter some strings that they are not real dependencies: some of them
are wrong result of script, some are conditional use/require, and some
are cpan extra modules that we don't need.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
File warnings/register.pm has been moved to package perl, update
RPROVIDES_perl to provides perl-module-warnings-register for backward
compatibility.
Update populate_package script for:
1 Way to deal directory 'Module/' is not right, it creates packages
whose names end with '-pm'. Update to drop these packages.
2 Deal directory 'auto/' to put same name module file(.pm) and library
file(.so) into one package. That because .pm file requires the same
name .so file at runtime.
[Part of Yocto 3338]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
In perl source code, run "make test" will run perl test cases. Put these
cases into a seprated sub-package then we can run the perl test on
target.
Add following module to nonxs_ext to install extra modules that required
by perl test cases:
CPAN/Meta CPAN/Meta/YAML Dumpvalue Env File/CheckTree HTTP/Tiny I18N/Collate
JSON/PP Perl/OSType Version/Requirements
Commands to run test:
cd /opt/perl-tests/t && ./TEST
[Yocto 3296]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The only file Glob.so provided by perl-module-file will be moved to
package perl-module-file-glob. So remove perl-module-file from RDEDENDS.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is needed so rpm compiles with the latest update of bison
(2.7), otherwise compilations ends with a "function already declared"
error.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Tested on core-image-minimal (qemux86).
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This patch creates a new distro feature "ptest", which creates -ptest
packages containing the test suite of the package for running on the
target. Test files are installed in /usr/lib/<pkg>/ptest.
The patch also includes a change to automake, splitting the "make check"
target into separate steps for building and running the tests.
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
random.py imports hashlib, so add this missing dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
commit 771d08 (cmake: Update to 2.8.10.2) removed the checksums from
cmake.inc, and added them to cmake, but forgot to add them to
cmake-native - this adds them.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
gcc-cross-canadian uses cross compiler during libgcc build
when building from sstate the build failed when building
gcc-cross-canadian since it did not populate gcc-cross
therefore add an explicit dependency on virtual/${TARGET_PREFIX}gcc
to make sure that gcc-cross is available before building
gcc-cross-canadian
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|