Age | Commit message (Collapse) | Author |
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move ffmpeg configuration options to Yocto PACKAGECONFIG options.
Signed-off-by: Suji Velupillai <suji.velupillai@broadcom.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The commercial license flag on libomxil is set because it may include
the Adaptive Multi-Rate audio codec (AMR) using FFmepg, which is patent
encumbered.
It turns out this component is disabled by default in the recipe; add a
PACKAGECONFIG to enable it and trigger the "commercial" LICENSE_FLAGS on
it. This make the default build configuration clean unless a user
specifically asks for AMR support, and prevents them from marking the
recipe with the "commerical" flag unnecessarily which could hide
potential problems later on.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Support added to configure mpg123 for FPU-less targets. Building for
fixed-point arithmetic increases performance on such devices.
Signed-off-by: Robert Rosengren <robert.rosengren@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport a patch to increase the timeout that might help with the
intermittent seek test failure.
[YOCTO #14194]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
refresh 0002-do-not-display-CLFAGS-to-improve-reproducibility-bui.patch
Signed-off-by: Wang Mingyu <wangmy@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
License-Update: Change in copyright years
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Error log:
| Run-time dependency libmfx found: YES 1.34
| Has header "mfx/mfxdefs.h" : YES
|
| ../gst-plugins-bad-1.18.2/sys/msdk/meson.build:75:2: ERROR: Include dir /usr/include/mfx does not exist.
|
| A full log can be found at /home/s
When msdk is enable in PACKAGECONFIG, plugin fails to locate includedir, so
adding a patch which prepend PKG_CONFIG_SYSROOT_DIR to the dir path
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport the CVE patches from upstream:
https://github.com/FFmpeg/FFmpeg/commit/27a99e2c7d450fef15594671eef4465c8a166bd7
https://github.com/FFmpeg/FFmpeg/commit/3e5959b3457f7f1856d997261e6ac672bba49e8b
CVE:
CVE-2020-35964
CVE-2020-35965
Signed-off-by: Khairul Rohaizzat Jamaluddin <khairul.rohaizzat.jamaluddin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Wang Mingyu <wangmy@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The location of the generated client.conf changed when switching from
Autotools to Meson.
Fixes this error when enabling autospawn-for-root:
sed: can't read src/client.conf: No such file or directory
Signed-off-by: Tanu Kaskinen <tanuk@iki.fi>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Tanu Kaskinen <tanuk@iki.fi>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upstream is moving from Autotools to Meson, Autotools support will be
dropped in 15.0.
I dropped some configure options:
* --enable-tcpwrap=no doesn't (currently) have a counterpart in Meson,
TCP Wrappers support is always disabled.
* --disable-esound doesn't have a counterpart in Meson, EsounD support
is always disabled.
* --disable-gconf doesn't have a counterpart in Meson, GConf support is
always disabled.
I backported a patch that implements support for the -Dvalgrind=disabled
option.
I checked with buildhistory what the differences are before and after
this patch (with qemuarm with neon removed from TUNE_FEATURES, all
PACKAGECONFIGs enabled):
* Obvious differences in DEPENDS: Autotools stuff removed and Meson
stuff added. There wasn't anything strange here.
* Packages have superfluous RDEPENDS removed from them. With Autotools
something caused for example X11 libraries to be added to RDEPENDS of
packages that don't have anything to do with X11.
* The pulseaudio-src package had MMX and SSE related files removed and
Neon related files added. I don't know why the ARM build previously
had MMX and SSE files included, the addition of Neon files is
explained by the fact that with Meson the Neon optimizations can't be
disabled if the compiler supports Neon (see below).
* libfoo.so symlinks changed to point to libfoo.so.X rather than
directly to libfoo.so.X.Y.Z. To my understading that's fine, since
libfoo.so.X is a symlink that points to libfoo.so.X.Y.Z.
* There were various file size changes, which I didn't investigate.
Previously the recipe disabled ARM Neon optimizations when "neon" was
not in TUNE_FEATURES. That was originally added in commit
4e7b91b5a2613b957b08aefbee1aac28fdd19598 at a time when PulseAudio's
build system didn't check the availability of the arm_neon.h header,
causing compilation errors when the header wasn't available. That issue
was fixed a long time ago, so there was little need for the
TUNE_FEATURES check, although it was still possible to make the build
fail if non-neon -mfpu was passed in CFLAGS, so the TUNE_FEATURES check
still had some theoretical benefit (theoretical, because generally OE
passes -mfpu in CC instead of CFLAGS, so OE's -mfpu option appears very
early in the compiler command line, which doesn't trip up PulseAudio's
current Autotools build system).
With Meson there's no option for disabling Neon optimizations if the
compiler supports Neon. If -mfpu is set in CC or CFLAGS, it's ignored,
because the build system adds -mfpu=neon at the end of the compiler
command line, overriding any earlier -mfpu options. This shouldn't be
a problem, because PulseAudio detects at runtime whether the CPU
supports Neon instructions.
Signed-off-by: Tanu Kaskinen <tanuk@iki.fi>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The GConf module is only needed for older versions of paprefs, other
applications shouldn't be interacting with PulseAudio's GConf settings.
Paprefs isn't packaged in OpenEmbedded, so there probably aren't any
users of the GConf functionality.
My immediate motivation for doing this is that I'm converting the
pulseaudio recipe to use Meson, and the GConf module isn't supported by
the Meson build system. Adding support for it would be possible, but
pretty pointless.
The GConf module will be removed in PulseAudio 15.0.
Signed-off-by: Tanu Kaskinen <tanuk@iki.fi>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This disables PulseAudio's EsounD emulation and the EsounD sink module.
EsounD has been obsolete for a long time, and doesn't seem to be
packaged for OpenEmbedded, so probably there are no applications around
that would need PulseAudio's EsounD support.
Signed-off-by: Tanu Kaskinen <tanuk@iki.fi>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I don't know what these variables were supposed to do, but there doesn't
seem to be anything that would use these variables, so removing them
should be safe. The PulseAudio recipe is the only place where these
appear in the repository.
These lines were included already in the original PulseAudio recipe that
was added in commit d9a4c588ef24e7e4019fbe5a2314addbcd3a6bb8 in 2007,
and already at that time there didn't seem to be anything using these
variables.
Signed-off-by: Tanu Kaskinen <tanuk@iki.fi>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
it only needs gstreamer-pbutils-1.0 from gst-plugins-base
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- all of the unsupported plugins are explicitly disabled on EXTRA_OEMESON
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
usrsctp lib source code is provided in gstreamer plugins bad source tree
and it is builded staticaly for the sctp plugin.
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop patches as it as merged upstream:
* gstreamer1.0: 0001-gst_private.h-increse-padding-in-struct-_GstClockEnt.patch
* gstreamer1.0-plugins-good: 0001-rpicamsrc-add-vchostif-library-as-it-is-required-to-.patch
Update pacthes:
* gstreamer1.0: 0001-gst-gstpluginloader.c-when-env-var-is-set-do-not-fal.patch
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
0001-remap-arm-Adjust-inline-asm-constraints.patch
0001-remap_neon-use-register-r12-instead-of-r7.patch
Removed since these are included in 14.0.
Signed-off-by: Zang Ruochen <zangrc.fnst@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are CVEs with the 'gst-plugins-base' product, so set that.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are CVEs with the 'gst-rtsp-server' product, so set that.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* 0001-rpicamsrc-add-vchostif-library-as-it-is-required-to-.patch
Upstream-Status: Submitted [https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/818]
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* 0001-lavf-srt-fix-build-fail-when-used-the-libsrt-1.4.1.patch
Upstream-Status: Backport [https://github.com/FFmpeg/FFmpeg/commit/7c59e1b0f285cd7c7b35fcd71f49c5fd52cf9315]
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes
| ../gstreamer-1.18.1/gst/gstsystemclock.c:330:1: error: static_assert failed due to requirement 'size
of(struct _GstClockEntryPThread) <= sizeof(struct _GstClockEntryImpl)' "Expression evaluates to false"
| G_STATIC_ASSERT (sizeof (GstClockEntryImpl) <= | ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the volatiles file name start with a numeric value to unified
volatiles file naming. I searched in oe-core, only pluseaudio volatiles
file name is not start with number.
On a default sato-sdk image:
$ ls /etc/default/volatiles/
00_core 01_bootlogd 99_dbus 99_sshd 99_wpa_supplicant volatiles.04_pulse
This is just a name change and will not affect the functionality.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Parts of alsa-utils are v2 only, parts are v2 or later. The effect is
the end result is GPLv2 and there seems little value in marking everything
as being a mixture of both. Fix LICENSE to match reality.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|