| Age | Commit message (Collapse) | Author |
|---|
|
Previously a warning was printed regardless of context and nature
of the failure, and because it was only a warning, it was mostly ignored.
Now, the following is considered when a failure happens:
1) whether we are installing packages into a target image, or populating
a SDK with host or target packages.
2) whether the failure was due to qemu not supporting the target machine.
Accordingly, warnings, notes, and failures are printed, and postponing
to first boot happens if possible.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemuwrapper-cross available in sysroots
The variants are needed in particular when executing postinst_intercepts as
those may require running binaries built for different architectures and
against different sets of library paths, when multilib is in use (or nativesdk host
packages are installed), so a single global variant of the script was not working.
I do understand expanding PATH and DEPENDS in this manner is hackish, however
every other approach I could think of is worse.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously only one global variant of the script was created,
which caused numerous issues:
1) multilib was not properly supported due to multilib variants each
needing their own version of the qemu binary and library paths to be set
2) nativesdk was not properly supported for the same reason
This patch also moves setting LD_LIBRARY_PATH directly into the
recipe, as passing it down from other recipes did not work when
said recipes were allarch, and adjusts calls to qemuwrapper from
postinst-intercepts, so that its correct variant is selected.
Also, the various qemu fallbacks in qemuwrapper script are all removed,
as they are no longer necessary.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise, there would be a failure at image creation time; avoid
that by postponing to first boot explicitly.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
mechanism
This has the following benefits:
- consistent with how the other caches are created into target rootfs
- only runs once per package manager transaction, instead of once per every immodule package
- correctly postpones to first boot if qemu is not working; from postinst itself
this would've required special arrangements to avoid what is now a do_rootfs failure.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Originally these ARM specific EXTRA_OECONF options were applied to
both gcc for the target and gcc-cross. That lead to a compromise
being made: gcc on the target was configured to default to an ARM
architecture which was at least compatible with the target (but not
necessarily an exact match) and gcc-cross was configured default to
armv7a for both armv7a and armv7ve (to avoid gcc-cross rebuilds when
switching between the two).
However, when these ARM specific EXTRA_OECONF options were moved from
gcc-configure-common.inc into gcc-target.inc (ie they were made to
apply only to gcc on the target) the compromise no longer needed to
be made.
http://git.openembedded.org/openembedded-core/commit/?id=851937dde81de2a9ef54c5f19a78fb12fb82afd4
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gobject-introspection hard-codes the install path in the search path
for the typelib repository, pretty much the same way glib behaves for
the gio modules directory. Like for glib, this causes problems when
gobject-introspection-native is restored from sstate with a different
build directory.
Based on the glib fix by Ross Burton <ross.burton@intel.com>.
Signed-off-by: Sascha Silbe <x-yo17@se-silbe.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
present
If package management is present opkg/dpkg will bring the original
copy of the postinsts scripts with the metadata and will be able to
handle postinsts just fine. In fact, it is preferred to let package
management handle the postinsts scripts in this case since it will
keep the package managers database up-to-date too. The run-postinsts
scripts will make sure the package manager gets invoked instead of
the scripts directly.
Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to
unistall packages") rootfs.py did not install /etc/$pm-postinsts
too. It is not clear whether that change was intentionally or just
a bug. This commit fixes/reverts that aspect of the commit.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Start opkg/dpkg as soon as the respective package managers status
file is present, no matter whether /etc/$pm-postinsts exists. This
decouples the implicit link between postinsts scripts in /etc and
the package manager: Currently the package manager is only started
if those scripts are present, although the package manager does not
use those scripts at all! Package managers install their own set of
postinst scripts.
The behavior when using rpm packages stays the same.
Note that using the package managers capability to execute postinst
scripts is preferred for good reasons: It makes sure that the
package managers database reflects that the packages have been
completely installed and configured.
This change allows to drop installation of the postinsts scripts
when package management is present. This will be done in a separate
change.
Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to
unistall packages") rootfs.py did not install /etc/$pm-postinsts
when package management is installed! The change caused YOCTO #8235
which lead to the behavior change of run-postinsts in first place.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OpenEmbedded has a built-in mechanism to run postinst scripts offline
at build time or, if necessary, on first boot (delayed execution). If
the latter is the case and systemd is in use, two services end up
doing the same thing:
- opkg-configure.service starts "opkg configure" directly.
- run-postinsts.service starts "/usr/sbin/run-postinsts" which runs
postinst scripts stored in /etc/ipk-postinsts/ or "opkg configure"
if package management is installed.
Since the run-postinsts.service is also used in cases where no
package management is in use, it is the primary means of handling
postinsts.
Get rid of the opkg-configure.service to avoid duplicate opkg
configure execution.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bugfixes only. Please see:
https://gstreamer.freedesktop.org/releases/1.14/#1.14.1
Remove a backport patch and rebase one other patch.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure that the tests are packaged and can be executed
when ptest is enabled. Also, remove build host specific references
from Makefile.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1.1.2 -> 1.1.3
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Refresh the following patch:
0001-Allow-using-obexd-without-systemd-in-the-user-sessio.patch
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
4.8.20 -> 4.8.21
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
0.52.0 -> 0.52.2
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
3.22.29 -> 3.22.30
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
3.22.29 -> 3.22.30
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1.5.1 -> 1.5.2
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
2.62.0 -> 2.62.2
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1.9.4 -> 1.11.0
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
2.0.28 -> 2.0.29
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The checksum value is only calculated if the uninative class is
inherited, so check for inherit before adding it to local.conf
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
default-versions.inc is included by defaultsetup.conf which in bitbake.conf
is included after local/machine/distro.conf.
If these are hard assignments distros can's overwrite them.
Signed-off-by: Stefan Stanacar <sstncr@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The audit package specifies the following:
UPDATERCPN = "auditd"
However because it is not multilibized, the value "auditd" is used to
search for the package to add the post install script too. In the mutlilib
alternate abi case, that package does not exist. It ends up assigning
the post install script to the lib32-audit-lic package, which
subsequently failes to execute the script due to the initscript it is
trying to turn on is not installed.
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's a bug in Meson[1] where it find_program("foo") will fail if foo is
defined in the cross file as a list.
This is causing the Meson build of libdrm to fail, but for this instance we can
work around the problem by only using lists in the cross file if there are
arguments, and just using a string if there are not.
[1] https://github.com/mesonbuild/meson/issues/3737
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The services and timers are not useful if a repo is not configured.
In OE, we default to have no repo configured. So we default to disable
these units.
The problem was found by the test_systemd_failed runtime test case.
dnf-makecache.service is found to fail. This is due to lack of repo.
Note that as this service is started by the dnf-makecache.timer, it's
possible that test_systemd_failed passes in case the timer is not started
yet.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following message from watchdog is not an error.
"error retry time-out = 60 seconds"
Checking watchdog's source codes, we have:
src/watchdog.c: log_message(LOG_INFO, "error retry time-out = %d seconds", retry_timeout);
It's clear this is an info message, so parselogs should ignore it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current init script is installed from source with redhat style.
It does not get configuration from /etc/default/watchdog. We should use
debian style init script.
Write our own script just like what wd_keepalive does.
Also, in the init script, we check the existence of /dev/watchdog to
determine whether to start the daemon or not.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to make sure logs are not lost. As long as there's no
strong and vaild reason, we should make daemons start after syslog.
As a side effect, we could check the logs to see if there are
some potential problem. In OE, the 'parselogs' test case could
do it automatically.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd has internal support for watchdog. See the RuntimeWatchdogSec
in /etc/systemd/system.conf.
We'd better just disable this service by default. If users want to use
watchdog, consider using the systemd one.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch modifies watchdog.conf file. But this file is deliberately
deleted in do_install. The current mechanism in OE is to use another
recipe watchdog-conf to handle watchdog configuration. So the patch
is really useless.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the following line to common_errors list.
Failed to read /var/lib/nfs/statd/state: Success
This message is not harmful, it does not result in rpc.statd starting
failure.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
And use bitbake variables for install paths to fix nativesdk-openssh
compilation.
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When generating the extended SDK, there is a copy step where this class
goes through the layers and other stuff that have been copied to
generate the SDK. The corebase; ie. the folder that contains the core
layer 'meta' is treated in a special way. Unfortunately in our tree, we
have:
sources/meta/meta
| `- core layer
`------- corebase
In populate_sdk_ext's copy_buildsystem, the heuristic to determine which
element of the list returned by copy_bitbake_and_layers is corebase is
fooled by such layout.
In copy_bitbake_and_layers, corebase is already handled specifically and
reliably, so we should let that function tell us which folder is
corebase instead of trying to determine it.
To do so, change the return type of copy_bitbake_and_layers to a tuple
that contains (corebase, copied_layers). It also simplifies the code on
the caller side.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's only one user of rsync.inc (meta-gplv2 has its own copy), so
merge the .inc file into the rsync recipe.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
An earlier version of a change was merged from S. Lockwood-Childs
<sjl@vctlabs.com> which made the CFLAGS consistent across native,
nativesdk and target cases. This syncs with a later verison of the
patch to remove duplicate CFLAGS settings and simplify the recipe.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When generating overlay DTB configuration sections, U-Boot doesn't want
the kernel specified again as we already have that in our base DTB. Add
support for this to allow bootm to process overlay configuration sections.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Alexander Kanavin
Andre McCurdy
Sascha Silbe
Stefan Agner
Anuj Mittal
Chen Qi
Maxin B. John
Jeremy Puhlman
Stefan Stanacar
Ross Burton
Mikko Rapeli
Damien Riegel
Richard Purdie
Alex Kiernan