aboutsummaryrefslogtreecommitdiffstats
path: root/meta
AgeCommit message (Collapse)Author
2016-10-01machine-sdk: Clear ABIEXTENSION to avoid sstate checksum mismatch issuesRichard Purdie
When switching MACHINE, nativeksdk recipes could end up being rebuilt. Clear ABIEXTENSION to avoid this problem and ensure sstate checksum consistency. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-01oeqa/sstatetests: Add test for multilib allarch checksumsRichard Purdie
Switching between multilib configurations should not change allarch recipe or nativesdk checksums. Add a new sstate test for this based on the standard allarch test. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30boost: Ensure native recipes have consistent checksumsRichard Purdie
When building boost-native on i686, the x86 override isn't applied unless the target also happens to be x86. Similarly the x86_64 override is only applied on 64 bit target machines. Avoid various problems by removing the new problematic configure options in the native case. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30gcc-cross: Stop target recipes depending on SDK_SYSRichard Purdie
gcc-cross target recipes should not depend on SDK_SYS but started to after recent changes. Remove the dependency to stop this (its caused by shared code in do_install). The compiler names contain SDK_SYS so changes would be correctly handled via other means. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30multilib.conf: Ensure sstate checksums don't change when using this includeRichard Purdie
When enabling multilib.conf, the world was rebuilding due to changes in the pkg-config search path. This doesn't matter so exclude it from the checksums. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30allarch: Fixes to stop rebuilds when change multilibsRichard Purdie
When changing multilibs, allarch recipes should not be rebuilding. This adds enough variable exclusions to make this work properly. Future regressions will be prevented with new testing. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30nativesdk: Don't enable MULTILIBSRichard Purdie
package_write_rpm references the MULTILIBS variable and the checksums of nativesdk recipes were changing as a result of this. We don't need/want MULTILIBS values for nativesdk so disable this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30oeqa/utils: Add StreamHandler to loggerFrancisco Pedraza
StreamHandler was added due missing log information on the console in oe-selftest with Qemu Runner Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30subprocess: remove Popen in favor of check_outputStephano Cetola
This begins moving away from the deprecated subprocess calls in an effort to eventually move to some more global abstraction using the run convenience method provided in python 3.5. [ YOCTO #9342 ] Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30kbd: create ptest sub-packageKai Kang
Create kbd-ptest sub-package: * add file run-ptest and runtime dependency make * modify installed Makefile to disable remake Makefile and the test cases when run the ptest * add patch to set proper path for test cases to get resource files Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30grub-efi.bbclass: Add a space between root and append parameterRaymond Tan
Add a space between the root and append parameter, similar to syslinux.bbclass, in creating the final grub.cfg. Without this, the final kernel boot parameters will concatenate into strings like root=/dev/ram0console=ttyS0... Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30multilib_header: avoid sstate checksum issues for -nativesdk recipesJoshua Lock
Much as with -native recipes, as addressed in commit b15730caf0d4c40271796887505507f2501958bb, arch specific variables like MIPSPKGSFX_ABI were affecting -nativesdk sstate checksums for recipes like nativesdk-glibc-initial. Disable multilib_header for nativesdk as we don't use multilibs in this scenario. [YOCTO #10320] Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30mips64-linux: set ac_cv_sizeof_ssize_t for mips64elZubair Lutfullah Kakakhel
The fix for [YOCTO #5935] was applied for mips64 but not for mips64el Patch it for mips64el For description of issue, check OE-Core 7a5b6b96 Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30image-buildinfo: restore trailing newlineAndré Draszik
The last line in the generated /etc/build doesn't end with a newline anymore, restore it. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30linux-yocto.inc: Run kernel_version_sanity_check with final sourceNathan Rossi
Ensure that the kernel_version_sanity_check task runs after all source modifications are complete, including any that are introduced during the kernel_metadata task. This also avoids any race condition issues when kernel_version_sanity_check and kernel_metadata tasks are running at the same time. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30tzdata: update to 2016gArmin Kuster
LICENSE md5sum changed do to rewording some text not released to the license. see https://github.com/eggert/tz/commit/8c143a2b65fdfd43a7911be6fdb700c9c4553f58 Changes to future time stamps Turkey switched from EET/EEST (+02/+03) to permanent +03, effective 2016-09-07. (Thanks to Burak AYDIN.) Use "+03" rather than an invented abbreviation for the new time. New leap second 2016-12-31 23:59:60 UTC as per IERS Bulletin C 52. (Thanks to Tim Parenti.) Changes to past time stamps For America/Los_Angeles, spring-forward transition times have been corrected from 02:00 to 02:01 in 1948, and from 02:00 to 01:00 in 1950-1966. For zones using Soviet time on 1919-07-01, transitions to UT-based time were at 00:00 UT, not at 02:00 local time. The affected zones are Europe/Kirov, Europe/Moscow, Europe/Samara, and Europe/Ulyanovsk. (Thanks to Alexander Belopolsky.) Changes to past and future time zone abbreviations The Factory zone now uses the time zone abbreviation -00 instead of a long English-language string, as -00 is now the normal way to represent an undefined time zone. Several zones in Antarctica and the former Soviet Union, along with zones intended for ships at sea that cannot use POSIX TZ strings, now use numeric time zone abbreviations instead of invented or obsolete alphanumeric abbreviations. The affected zones are Antarctica/Casey, Antarctica/Davis, Antarctica/DumontDUrville, Antarctica/Mawson, Antarctica/Rothera, Antarctica/Syowa, Antarctica/Troll, Antarctica/Vostok, Asia/Anadyr, Asia/Ashgabat, Asia/Baku, Asia/Bishkek, Asia/Chita, Asia/Dushanbe, Asia/Irkutsk, Asia/Kamchatka, Asia/Khandyga, Asia/Krasnoyarsk, Asia/Magadan, Asia/Omsk, Asia/Sakhalin, Asia/Samarkand, Asia/Srednekolymsk, Asia/Tashkent, Asia/Tbilisi, Asia/Ust-Nera, Asia/Vladivostok, Asia/Yakutsk, Asia/Yekaterinburg, Asia/Yerevan, Etc/GMT-14, Etc/GMT-13, Etc/GMT-12, Etc/GMT-11, Etc/GMT-10, Etc/GMT-9, Etc/GMT-8, Etc/GMT-7, Etc/GMT-6, Etc/GMT-5, Etc/GMT-4, Etc/GMT-3, Etc/GMT-2, Etc/GMT-1, Etc/GMT+1, Etc/GMT+2, Etc/GMT+3, Etc/GMT+4, Etc/GMT+5, Etc/GMT+6, Etc/GMT+7, Etc/GMT+8, Etc/GMT+9, Etc/GMT+10, Etc/GMT+11, Etc/GMT+12, Europe/Kaliningrad, Europe/Minsk, Europe/Samara, Europe/Volgograd, and Indian/Kerguelen. For Europe/Moscow the invented abbreviation MSM was replaced by +05, whereas MSK and MSD were kept as they are not our invention and are widely used. Changes to zone names Rename Asia/Rangoon to Asia/Yangon, with a backward compatibility link. (Thanks to David Massoud.) Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30tzcode-native: Update to 2016gArmin Kuster
LICENSE file checksum changed do to a verbage change. Changes to code zic no longer generates binary files containing POSIX TZ-like strings that disagree with the local time type after the last explicit transition in the data. This fixes a bug with Africa/Casablanca and Africa/El_Aaiun in some year-2037 time stamps on the reference platform. (Thanks to Alexander Belopolsky for reporting the bug and suggesting a way forward.) If the installed localtime and/or posixrules files are symbolic links, zic now keeps them symbolic links when updating them, for compatibility with platforms like OpenSUSE where other programs configure these files as symlinks. zic now avoids hard linking to symbolic links, avoids some unnecessary mkdir and stat system calls, and uses shorter file names internally. zdump has a new -i option to generate transitions in a more-compact but still human-readable format. This option is experimental, and the output format may change in future versions. (Thanks to Jon Skeet for suggesting that an option was needed, and thanks to Tim Parenti and Chris Rovick for further comments.) Changes to build procedure An experimental distribution format is available, in addition to the traditional format which will continue to be distributed. The new format is a tarball tzdb-VERSION.tar.lz with signature file tzdb-VERSION.tar.lz.asc. It unpacks to a top-level directory tzdb-VERSION containing the code and data of the traditional two-tarball format, along with extra data that may be useful. (Thanks to Antonio Diaz Diaz, Oscar van Vlijmen, and many others for comments about the experimental format.) The release version number is now more accurate in the usual case where releases are built from a Git repository. For example, if 23 commits and some working-file changes have been made since release 2016g, the version number is now something like '2016g-23-g50556e3-dirty' instead of the misleading '2016g'. Official releases uses the same version number format as before, e.g., '2016g'. To support the more-accurate version number, its specification has moved from a line in the Makefile to a new source file 'version'. The experimental distribution contains a file to2050.tzs that contains what should be the output of 'zdump -i -c 2050' on primary zones. If this file is available, 'make check' now checks that zdump generates this output. 'make check_web' now works on Fedora-like distributions. Changes to documentation and commentary tzfile.5 now documents the new restriction on POSIX TZ-like strings that is now implemented by zic. Comments now cite URLs for some 1917-1921 Russian DST decrees. (Thanks to Alexander Belopolsky.) tz-link.htm mentions JuliaTime (thanks to Curtis Vogt) and Time4J (thanks to Meno Hochschild) and ThreeTen-Extra, and its description of Java 8 has been brought up to date (thanks to Stephen Colebourne). Its description of local time on Mars has been updated to match current practice, and URLs have been updated and some obsolete ones removed. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30pseudo: quiet diagnostics during startup for pseudo -dRobert Yang
When the client spawns a pseudo server, it starts out sending diagnostics to stderr. This can be spammy in some cases with races during startup; everything resolves, but we get scary-looking diagnostics. So shove those into a log file. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2016-09-30libxml-parser-perl: remove redundant expat-native dependencyRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30bootchart2: Allocate space on heap for collector chunksKyle Russell
Nicer for embedded devices which may have smaller stack limitations. Signed-off-by: Kyle Russell <bkylerussell@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-30db: Refresh patchesRichard Purdie
The patches were failing to apply in some cases, refresh them aganst the current source. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-29db: Upgrade to 6.0.35Aníbal Limón
The SRC_URI was changed to point gentoo distfiles because now Oracle request authorization for download the source code [1], there are no changes in the LICENSE since version 6.0.20 when the LICENSE changes to AGPL-3 [2], also the md5sum was review to be sure that is the same. This minor upgrade fix an issue related to multiple rpm instances querying the database [3]. The bugfixes related are, - Fixed a bug that may lead to a crash when opening multiple environments in a multi-threaded program. - Fixed a bug where closing a panic environment raised access violation and crashed the program. For see the complete list of changes mostly bugfixes between 6.0.30 and 6.0.35 [4]. [1] http://download.oracle.com/otn/berkeley-db/db-6.0.35.tar.gz [2] http://download.oracle.com/otndocs/products/berkeleydb/html/changelog_6_0.html#idp509784 [3] https://bugzilla.yoctoproject.org/show_bug.cgi?id=10157#c0 [4] http://download.oracle.com/otndocs/products/berkeleydb/html/changelog_6_0.html#idp503384 [YOCTO #10157] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-29cross-canadian/libgcc-common: Fixes for arm multilibRichard Purdie
Arm is unusual in that we force it to "linux-gnueabi" and "linux" doesn't build. This was causing problems for multilib configurations which were assuming "linux" was the default compiler rather than linux-gnueabi. This change does two things, ensures symlinks are generated for linux-gnueabi and also adapts the libgcc code to account for the difference on arm. It still needs to immediately expand/save TARGET_VENDOR but we defer deciding what TARGET_OS should be until we know TARGET_ARCH (which the multilib code may change). [YOCTO #8642] Note that sanity tests of a 32 bit arm multilib still break due to issues with the kernel headers on a mixed bit system. This looks to be a general headers issue for the platform though and a different type of bug. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-29parselogs: Update uvesafb errors in qemu whitelistJianxun Zhang
This change only whitelists the timeout message in infinite wait case in uvesafb driver. With the latest timeout patch introducing infinite wait in uvesafb driver, we whitelist the timeout message since it works as a warning for issues related to timeout not to be fixed in build servers. We remove other errors for bug-discovering purposes in some cases where these lines are still worthy to be caught (not whitelisted): The removed errors show up again in the infinite wait case. It indicates a different root cause or the timeout patch doesn't work correctly. Timeout happens when developers explicitly set a non-negative timeout of a limited period to wait for task completion in uvesafb driver. Timeout or/and errors occur when kernel doesn't have the latest timeout patch in driver. Note: The latest timeout patch is tracked by: a2966330bcd29e99c0403235edb29433b0c53d56 [YOCTO #8245] Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28qemuboot: don't fail when QB_DEFAULT_KERNEL isn't symlinkMartin Jansa
* in some cases we might set QB_DEFAULT_KERNEL to the real filename instead of symlink and then this whole readlink work around actually breaks the build, because os.readlink fails on normal files: >>> os.readlink('deploy/images/qemux86/bzImage-linux-yocto-qemux86-master-20160927084848.bin') 'bzImage-linux-yocto-qemux86.bin' >>> os.readlink('deploy/images/qemux86/bzImage-linux-yocto-qemux86.bin') Traceback (most recent call last): File "<stdin>", line 1, in <module> OSError: [Errno 22] Invalid argument: '/jenkins/mjansa/build-starfish-master-mcf/BUILD/deploy/images/qemux86/bzImage-linux-yocto-qemux86.bin' Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28cve-check-tool: report progress when downloading CVE databaseAndré Draszik
We add a patch to report the progress, and at the same time inform bitbake that progress can be extracted via the simple 'percent' progress handler. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28cve-check-tool: convert do_populate_cve_db() from python to shAndré Draszik
This will allow us to easily incorporate progress support via bb.process.run() Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28oeqa/sstatetests: Ensure we cover deb packaging backend for sstate testRichard Purdie
Currently we weren't testing the deb backaned for sstate correctness and there was a bug that had crept in. Ensure we cover all package backends with the test regardless of what the distro/conf sets. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28dpkg: Only set DEB_HOST_ARCH in target caseRichard Purdie
If we don't do this, the sstate checksums vary for dpkg-native depending on which MACHINE is set and this is clearly incorrect. It leads to dpkg-native rebuilding far too often. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28populate_sdk_base.bbclass: fix broken variablesIoan-Adrian Ratiu
This function never worked because the SDK_OUTPUT and SDKPATH vars are written bash-style in a python function. The only reason it never failed a build is because the function bails out the start because of the flag CHECK_SDK_SYSROOTS. And I guess nobody tested with CHECK_SDK_SYSROOTS enabled until now. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28lib/oeqa: Regenerate galculator configureJussi Kukkonen
galculator configure seems to be so old it does not recognise --with-libtool-sysroot: regenerate configure. Fixes [YOCTO #10191]. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28perl: module-overload needs module-overloadingNathan Lynch
This dependency was manually added in 3dec9ad1cd6a ("perl: module overload rdpends on overloading") but was (mistakenly?) removed by 06d43a90acbe ("perl: 5.20.0 -> 5.22.0"). Restore it. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28perl: correct math-bigint dependency typoNathan Lynch
This is obviously meant to be RDEPENDS. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28lttng-tools: fix ptestNathan Lynch
Since the upgrade to 2.8, lttng-tools' test harness silently succeeds but doesn't actually run the tests. This is because upstream made some changes in their test harness: https://github.com/lttng/lttng-tools/commit/83666813cad3142ceccb929ca9b44d0e9cf53bc8 Updates to address this include: - drop now-irrelevant patch - change the ptest-run make target - remove indiscriminate search/replace commands from do_install_ptest - copy entire build directory into PTEST_PATH and then remove unneeded files - use lttng binaries installed on the system for the tests - add lttng-tools-ptest runtime dependencies - lttng-tools itself - babeltrace, used by the test harness to process traces - perl modules required by babelstats.pl test script - procps (for pgrep, pidof) - gawk - remove unnecessary chmod and munging of utils.sh script library - remove checkpatch from ptest installation tree - avoid path-munging of libtool artifacts altogether - use more efficient find+sed patterns to munge Makefiles - reduce test harness output to conform to ptest rules On qemux86-64 and qemuarm I get relatively stable results, with PASS/FAIL varying by +-1 on successive runs. TOTAL: 2345 PASS: 1735 SKIP: 311 XFAIL: 0 FAIL: 292 XPASS: 0 ERROR: 7 There are some ERRORs worth looking into further but this should be a useful basis for future work. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28linux-yocto/4.8: update to -rc8Bruce Ashfield
Updating linux-yocto*4.8 to -rc8. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28openssl: Upgrade 1.0.2i -> 1.0.2jRichard Purdie
Deals with a CVE issue Drops a patch applied upstream and no longer needed. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28image_types.bbclass: remove redundant dependencyEd Bartosh
Removed parted-native dependency from do_image_wic as it's already mentioned in IMAGE_DEPENDS_wic variable. Thanks to Christopher Larson for pointing out to this. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-28linux-yocto: Move PREFERRED_PROVIDER check to be genericSaul Wold
This check ensures that when the PREFERRED_PROVIDER for virtual/kernel changes, the previous instances gets removed correctly so when the new instance installs files into the shared area there is not an overlap of old and new. [YOCTO #10278] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28SDK: Allow changing SDKMACHINE without wiping TMP folderJuro Bystricky
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder. Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS result in conflicts. Eventually we hit the error: ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist. The build has stopped as continuing in this scenario WILL break things This patchset addresses the problem by SDK_SYS as the recipe name suffix instead of SDK_ARCH. [YOCTO #9281] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28libsolv: enable MULTI_SEMANTICSAlejandro del Castillo
By default, libsolv uses the rpm logic for version comparison, which is not quite the same as debian. Opkg now sets the distribution type for libsolv to be debian. But for that to work, libsolv needs to be compiled with MULTI_SEMANTICS=ON. Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28parselogs.py: Add amd_nb error to x86_common whitelistCalifornia Sullivan
This has always silently failed on hardware without AMD Northbridge, and a recent kernel patch made it not silent. It would be ideal to only whitelist the error for genericx86 MACHINEs and disable the CONFIG option that enables it in intel-* MACHINEs, but in order to disable this configuration option we would have to enable EXPERT and DEBUG_KERNEL, which we don't want. Instead just whitelist it on all x86 MACHINEs. Fixes [YOCTO #10261]. Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28gst-player: Disable visualizationsMaxin B. John
On some machines, visualizations in gst-player trigger a bug in xvimagesink. Till we have a proper fix, disable the visualization rather than downgrading the xvimagesink. Fixes [YOCTO #10041] Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28perl: fix CVE-2016-1238Mingli Yu
Backport patch to fix CVE-2016-1238 from perl upstream: http://perl5.git.perl.org/perl.git/commitdiff/cee96d52c39b1e7b36e1c62d38bcd8d86e9a41ab Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28python: fix CVE-2016-1000110Mingli Yu
Backport patch to fix CVE-2016-1000110 from python upstream: for python2.7 https://hg.python.org/cpython/rev/ba915d561667/ for python3 https://hg.python.org/cpython/rev/a0ac52ed8f79 Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28archive.bbclass: fix do_ar_original archiving of multiple source reposPatrick Ohly
When a recipe uses more than one source which isn't a plain file (for example, multiple git repos), then do_ar_original created the source archives using the same filename and thus only archived one source. The "name" parameter is used as file suffix to create unique names for each source, leading to archives following this pattern: deploy/${TARGET_SYS}/${PF}/${PF}[-<name>].tar.gz. The ${PF} part is a bit redundant, which may or may not be desirable. The patch is more localized this way (no need to modify create_tarball()). For example, meta-oic's iotivity_1.1.1.bb uses: url_iotivity = "git://github.com/iotivity/iotivity.git" branch_iotivity = "1.1-rel" SRC_URI = "${url_iotivity};destsuffix=${S};branch=${branch_iotivity};protocol=http;" url_tinycbor = "git://github.com/01org/tinycbor.git" SRC_URI += "${url_tinycbor};name=tinycbor;destsuffix=${S}/extlibs/tinycbor/tinycbor;protocol=http" url_hippomocks = "git://github.com/dascandy/hippomocks.git" SRC_URI += "${url_hippomocks};name=hippomocks;destsuffix=${S}/extlibs/hippomocks-master;protocol=http" SRC_URI += "file://hippomocks_mips_patch" url_gtest = "http://pkgs.fedoraproject.org/repo/pkgs/gtest/gtest-1.7.0.zip/2d6ec8ccdf5c46b05ba54a9fd1d130d7/gtest-1.7.0.zip" SRC_URI += "${url_gtest};name=gtest;subdir=${BP}/extlibs/gtest" url_sqlite = "http://www.sqlite.org/2015/sqlite-amalgamation-3081101.zip" SRC_URI += "${url_sqlite};name=sqlite3;subdir=${BP}/extlibs/sqlite3;unpack=false" These now get archived in deploy/sources/*/iotivity-1.1.1-r2/ as: gtest-1.7.0.zip iotivity-1.1.1-r2-recipe.tar.gz sqlite-amalgamation-3081101.zip hippomocks_mips_patch iotivity-1.1.1-r2.tar.gz iotivity-1.1.1-r2-hippomocks.tar.gz iotivity-1.1.1-r2-tinycbor.tar.gz Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28archiver.bbclass: ignore unpack sub-directories in do_ar_originalPatrick Ohly
Support for absolute paths in the "subdir" parameter was recently added (bitbake rev: c3873346c6fa). The git fetcher has supported absolute paths in "destsuffix" already before. When the path is absolute as in destsuffix=${S}/foobar, the tmpdir used by do_ar_original gets ignored, which breaks: - source code archiving (tmpdir is empty) - compilation due to race conditions (for example, ${S} getting modified by do_ar_original while do_compile runs) To solve this, these parameters get removed from URLs before instantiating the fetcher for them. This is done unconditionally also for relative paths, because these paths are not useful when archiving the original source (upstream source does not have them, they only get used by the recipe during compilation). Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28linux-firmware: package Broadcom BCM43430 firmwareDaiane Angolini
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28linux-firmware: update to revision 42ad5367Daiane Angolini
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28boost: add support for additional boost libsJackie Huang
* Added libs: - container - context - coroutine - exception - graph_parallel - locale - math - mpi - wave * Add PACKAGECONFIG to add proper dependencies for: graph_parallel, locale, and mpi. * boost-mpi depends on mpich which is in meta-oe, and boost-graph_parallel depends on boost-mpi, so they are disabled by default, but can be enabled in a distro that needs them. * context and coroutine are added only for x86 and powerpc. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-28boost: disable pch when build boost-mathJackie Huang
It's a work around for a defect when build in parallel: https://svn.boost.org/trac/boost/ticket/12477 Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-25 07:04:16 +0000