| Age | Commit message (Collapse) | Author |
|---|
|
The rpm 5 has a rpm-build package, so here should use RPROVIDES rather
than PROVIDES to keep compatibility.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
mdadm only works with corosync 2.x which provides header file corosync/cmap.h.
If build mdadm with corosync 1.x, it fails with:
| member.c:12:27: fatal error: corosync/cmap.h: No such file or directory
| #include <corosync/cmap.h>
| ^
Build with corosync only header file corosync/cmap.h exists.
Ref:
https://github.com/neilbrown/mdadm/blob/master/mdadm.h#L63
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
roofs -> rootfs.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When performing a file system check, the image created with mkfs will
trigger Pass 3A ('Optimizing directories') which turns the file system
into state "changed" (EXT2_FLAG_CHANGED).
This will let fsck request a reboot by setting the return code flag "2".
The result of this is that each ext-image built with oe-core will
trigger a reboot during the first time an fsck is triggered.
A common case where this might occur is when fsck detects having
a future superblock write time. This always happens when booting a
newly created ext4 rootfs with a target that does not have a recent time
set.
This patch moves the initial fsck run that performs the optimization
from the target to the host system and thus prevents the target from
performing an avoidable reboot.
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Ulrich Ölmann <uol@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Limit the length of error logs to 40 lines. We don't need to
show/archive thousands of lines of bitbake logs if an error occurs.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make it possible to limit the length of output lines shown in runCmd
exceptions. E.g when running bitbake we easily get thousands of lines of
log output, where only the last few (tens) are interesting or relevant
when an error occurs.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of separate rusage and child rusage values, only store their sum
value in buildstats. This is a big reduction in data footprint without
really losing any interesting data.
Also, utilize OrderedDict to order data more logically.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Write out all buildstats into one big json file, instead of using
multiple per-measurement files. Individual buildstats will be indexed
using "<test_name>.<measurement_name>" as the key. Also, changes the
per-testcase working directories into temporary directories that will be
removed after test execution as there are no more per-testcase data files
to store permanently.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_diffs in the vg_regtest script compares the actual test output
against the expected test output and returns 0 if it matches.
Previous upgrade modified the return value of do_diffs() and that
resulted in ptest failures.
[YOCTO #8471]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
@PERL@ in vg_regtest.in causes recipe specific sysroot based perl to
be present in the vg_regtest script, making it unusable in the target.
Use /usr/bin/perl instead of @PERL@ to fix it.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Re-order some assignments to be logically arranged.
Remove the set -ex statements as they serve no purpose.
Pass --debug-configuration to see what configuration steps boost is taking.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As Python 3 is the default Python version, change Boost to build against Python
3 instead of Python 2 if enabled. It's not simple to support both, so this
means that support for building boost-python against Python 2 has been removed.
This involves backporting a number of patches upstream to fix Python 3 support,
and telling Boost precisely where to find the Python headers and libraries so
that it doesn't try to invoke the host Python to determine these values.
[ YOCTO #11104 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Briefly: Haiti has resumed DST.
Changes to past and future time stamps
Haiti resumed observance of DST in 2017. (Thanks to Steffen Thorsen.)
Changes to past time stamps
Liberia changed from -004430 to +00 on 1972-01-07, not 1972-05-01.
Use "MMT" to abbreviate Liberia's time zone before 1972, as "-004430"
is one byte over the POSIX limit. (Problem reported by Derick Rethans.)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bb.note prints multiple same lines when invoke this class again, but
if we set mainlogger.propagate = False, nothing would be printed,
according to logging's document:
https://docs.python.org/3/library/logging.html
Note
If you attach a handler to a logger and one or more of its ancestors, it
may emit the same record multiple times. In general, you should not need
to attach a handler to more than one logger - if you just attach it to
the appropriate logger which is highest in the logger hierarchy, then it
will see all events logged by all descendant loggers, provided that
their propagate setting is left set to True. A common scenario is to
attach handlers only to the root logger, and to let propagation take
care of the rest.
We may need avoid using bb.note or bb.warn in oeqa since it attaches
multiple log handlers which may cause confusions
This patch only sets "mainlogger.propagate = False" in
selftest/runqemu.py and use logger.info to replace bb.note in
targetcontrol.py to minimize the impact.
[YOCTO #10249]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Usage:
$ oe-selftest -r runqemu
Current test cases:
$ runqemu nographic qemux86-64
$ runqemu nographic qemux86-64 ext4
$ runqemu nographic qemux86-64 iso
$ runqemu nographic core-image-minimal
$ runqemu nographic core-image-minimal vmdk
$ runqemu nographic core-image-minimal vdi
$ runqemu nographic tmp/deploy/images/qemux86-64
$ runqemu nographic tmp/deploy/images/qemux86-64 hddimg
$ runqemu nographic qemux86-64 slirp
$ runqemu nographic qemux86-64 slirp qcow2
$ runqemu nographic tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.qemuboot.conf
$ runqemu nographic tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.ext4
Need more later:
- Test initramfs
- Test nfs
- Test when set DEPLOY_DIR_IMAGE and OECORE_NATIVE_SYSROOT
- And others which similate runqemu runs on SDK and eSDK.
[YOCTO #10249]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The launch() doesn't need runqemuparams, we need handle it in start().
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify the following files to test runqemu:
targetcontrol.py
utils/commands.py
utils/qemurunner.py
We need simulate how "runqemu" works in command line, so when test
"runqemu", the targetcontrol.py, utils/commands.py and
utils/qemurunner.py don't have to find the rootfs or set env vars.
[YOCTO #10249]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some commands might need to run longer than the default timeout of
five seconds. If that occurred, run_serial() returned with a status
code of zero (sic!) and no other indication of what went wrong.
Now the timeout is configurable (with five still the default) and
an explicit warning ("<<< run_serial(): command timed out after 5 seconds without output >>>")
gets appended at the end of the data returned to the caller.
While at it, the logic for checking for the timeout was updated a bit
because both implementations could overshoot the timeout when entering
select() right before the final deadline.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a PACKAGECONFIG option to allow the user to disable the mouse
cursor/pointer in the X server. This might be useful where a
touchscreen is used.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if something is added to a sysroot, its hash remains unchanged,
and it continues to be buildable, it doesn't get removed from the sysroot.
This patch handles the case where something is removed from DEPENDS or
[depends].
It does introduce its own issue where something could get removed even
though some other task in parallel may have the same requirement. This
case should be extrememly rare and fixing the more common DEPENDS removal
is likely the bigger win though.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed were made to the code but not reflected in vardepsexclude, fix this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The original description for this was:
"""
Since we clean out do_populate_sysroot if do_configure runs, don't
allow do_populate_sysroot_setscene functions if we're going to
run do_configure.
"""
With RSS, we don't need to clean do_populate_sysroot any more. Since
we no longer do that, this function also has no purpose any longer
and can also be removed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With recipe specific sysroots its now pointless to do this, may as well
save the cpu cycles.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BB_SETSCENE_VERIFY_FUNCTION2 replaced BB_SETSCENE_VERIFY_FUNCTION
and due to our minimum bitbake requirements there is no point in
retaining the older version any more.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make use of lnr/ln -r while creating relative symlinks than guessing the
relalive path.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
/bin, /sbin, /lib are replaced with ${base_bindir}, ${base_sbindir} and
${base_libdir}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rename local function to avoid conflicts with compiler intrinsics
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Try to avoid native recipes accidentally being dependent on
MACHINE_FEATURES. This simple change doesn't prevent MACHINE_FEATURES
set via MACHINE_FEATURES_BACKFILL sneaking through, but it's better
than nothing.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the list of available IMAGE_FEATURES with the sub-features of
'debug-tweaks' and add 'splash'.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace hardcoded '/lib' in kernel firmware installation path with
${nonarch_base_libdir}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #9542]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* respect it for incremental rootfs generation
* add lists_dir option to opkg.conf
* also fix setting info_dir and status_file when they use default value, the
problem is that self.opkg_dir is already prefixed with rootfs directory,
comparing it with /var/lib/opkg always returned false and the options were
appended to config file unnecessary
* with opkg 0.3.4 we can use VARDIR prefix added in:
commit d2a8e23dc669adc398f4bb8bcfcabfcf925708f7
Author: Florin Gherendi <floring2502@gmail.com>
Date: Mon Dec 19 12:25:38 2016 +0200
libopkg: make the /var and /etc directories configurable at compile time.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* when OPKGLIBDIR doesn't have the default /var/lib value it will
silently fail to copy package database from normal rootfs to debugfs
rootfs and then when trying to install *-dbg complimentary packages
it won't install anything, because installed_pkgs.txt file generated
from debugfs is empty
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The windres binutils binary which is used for Windows resource files
requires utf-16 and cp1252 encoding support in order to correctly
generate resource files with strings. As such when using uninative to
build mingw resources for a nativesdk target the windres binary is
executed on the native host, thus using the uninative libc and gconv
modules.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
rpm 5.x was packaging build tools separately, so we need to unbreak
things that relied on that.
[YOCTO #11167]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is entirely unnecessary (we can ask the signer backend to export the
key to a file when needed), and was causing confusing selftest failures
due to the variable being set from two different places.
[YOCTO #11191]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using RPM deploy dir was causing errors when pre-built images were
used with these steps:
https://wiki.yoctoproject.org/wiki/Quality_Assurance_yocto_project
[YOCTO #11173]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test case builds wic image using rawcopy plugin
running wic directly.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed long lines, indentation and one unused variable.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added test_rawcopy_plugin_qemu test case and wks template.
This test builds ext4 rootfs image, copies it to the root
partition of the wic image using rawcopy plugin and
boots wic image in qemu.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When you enable the systemd DISTRO_FEATURE, opkg-native contains systemd units
which have a relocation fixme list. When systemd isn't in DISTRO_FEATURES, there
are no fixmes required. Unfortunately as sstate isn't cleaning up its installation
directory before use, if you install the systemd version, then install the
non-systemd version from sstate, it would leave behind the fixme file from the
systemd version and breakage results as it would try and fixup files which don't
exist.
The solution is to ensure the unpack/install directory is clean before use. It
does raise other questions about opkg-native, systemd and DISTRO_FEATURES but there
is an underlying sstate issue here too which would cause missing file failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not sure why this cleanup is disabled but it clearly should be running
so enable it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I've been debugging a selftest failure on Centos7. The problem turns out
to be the elderly git version (1.8.3.1) on those systems. It means that
the system doesn't correctly checksum changed files in the source tree,
which in turn means do_compile fails to run and this leads to the following
selftest failure:
======================================================================
FAIL [141.373s]: test_devtool_buildclean (oeqa.selftest.devtool.DevtoolTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/devtool.py", line 530, in test_devtool_buildclean
assertFile(tempdir_mdadm, 'mdadm')
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/devtool.py", line 497, in assertFile
self.assertTrue(os.path.exists(f), "%r does not exist" % f)
AssertionError: False is not true : '/tmp/devtoolqag88s39z8/mdadm' does not exist
The solution is to use -A on the git add commandline which matches the behaviour
in git 2.0+ versions and resolves the problem.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic has a new flag for setting a fixed parition size --fixed-size. Add
tests that verify if partition is indeed sized properly and that errors
are signaled when there is not enough space to fit partition data.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of assuming that bzImage is available, query bitbake enviroment
for KERNEL_IMAGETYPE.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Wic tests will unconditionally attempt to build images that may require
dependencies that are incompatible with current target.
Resolve this by consulting HOST_ARCH first (which defaults to TARGET_ARCH)
before proceeding to build images that may be incompatible.
A convenience decorator only_for_arch() can be used to skip test cases for
specific architectures.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use wictestdisk instead of directdisk thus allowing more tests to be run on
non-x86 compatible machines.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is useful to know which layer provided a given recipe and its
binary packages.
Many projects combine a number of layers and some of them
also provide same recipe names in which case bitbake
can prioritize between them. buildhistory can record
the decision by saving the layer from where the recipe
was taken from.
Also, if a project is split to sub projects which maintain
recipes in different meta layers, then meta layer specific
summaries of e.g. disk usage can be calculated if
source recipes meta layer name is recorded for example in
buildhistory.
If source layer is not in build history, then layer providing
the recipe can be exported from build environment using
'bitbake-layers show-recipes', but it takes a long time to execute
since all recipes are parsed again and requires full source tree
with correct build configuration.
This patch exports the name of layer as configured in BBFILE_COLLECTIONS
append of its layer.conf. 'bitbake-layers show-recipes' exports the
meta layers directory path name. For several open source layers
these are different, e.g. meta-openembedded/meta-perl/conf/layer.conf
is perl-layer, poky/meta/conf/layer.conf is core,
poky/meta-skeleton/conf/layer.conf is skeleton etc.
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Robert Yang
Kai Kang
Enrico Jorns
Markus Lehtonen
Maxin B. John
Ross Burton
Armin Kuster
Chen Qi
Patrick Ohly
Trevor Woerner
Richard Purdie
Amarnath Valluri
Khem Raj
Andre McCurdy
Alexander Kanavin
Martin Jansa
Nathan Rossi
Ed Bartosh
Maciej Borzecki
Mikko Rapeli