| Age | Commit message (Collapse) | Author |
|---|
|
It should be possible to generate a disk to a file using a loopback
device with mkefidisk.sh, which is useful for booting simulators. To
make this possible the partitions for the loop back need to work
similarly to the mmc devices. The mkfs.vfat also requires and
additional argument to force it to write to something other then a
real disk.
Example:
qemu-img create -f raw bigdisk 4G
dev=`sudo losetup -f`
sudo losetup $dev bigdisk
mkefidisk.sh $dev tmp-eglibc/deploy/images/qemux86/core-image-minimal-qemux86.hddimg /dev/sda
sudo losetup -d $dev
Note:
Also a bug was fixed in the mkefidisk.sh where if the disk you are
writing to initially has an invalid label the size of the first
partition will be computed incorrectly. For the simulator disk
creation this is generally always the case, but this can happen with
real hardware as well.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If not every combination of BB_NUMBER_THREADS and PARALLEL_MAKE have
been tested by bb-matrix.sh, e.g., by using BB_RANGE="04 08 10 12 16"
and PM_RANGE="04 08 10 12 16", then the graph that gnuplot generates by
default looks very jagged due to the missing data points. By using
splines to interpolate the missing data the graph looks a lot better.
This should not change graphs where all data points are available in any
way, only improve sparse graphs.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes sure the the first build starts from a clean state. Otherwise
one could have the first build affected by any leftover state from
a previous build.
This also leaves a working state behind after the final build.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Run list-packageconfig-flags.py on wrlinux's platform in which
the oe-core layer and bitbake layer in different directories:
----
../layers/oe-core/scripts/contrib/list-packageconfig-flags.py
Traceback (most recent call last):
File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module>
import bb.cache
ImportError: No module named bb.cache
----
The script import bb module from bitbake lib dir, the previous
lib dir was hardcode and only worked on poky but not for others.
In this situation, look for bitbake/bin dir in PATH could fix this issue.
[YOCTO #5060]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python-multiprocessing
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- This script will list available pkgs which have PACKAGECONFIG flags.
- If option '-f' is used, it will list available PACKAGECONFIG flags
and all affected pkgs.
- If option '-a' is used, it will list all pkgs and PACKAGECONFIG
information
- If option '-p' is used, it means list the pkgs with preferred version
EXAMPLE:
list-packageconfig-flags.py
PACKAGE NAME PACKAGECONFIG FLAGS
==============================================================
alsa-tools-1.0.26.1 defaultval gtk+
avahi-ui-0.6.31 defaultval python
bluez4-4.101 alsa defaultval pie
list-packageconfig-flags.py -f
PACKAGECONFIG FLAG PACKAGE NAMES
====================================
3g connman-1.16
avahi cups-1.6.3 pulseaudio-4.0
beecrypt rpm-5.4.9 rpm-native-5.4.9
list-packageconfig-flags.py -a
==================================================
gtk+-2.24.18
/home/jiahongxu/yocto/poky/meta/recipes-gnome/gtk+/gtk+_2.24.18.bb
PACKAGECONFIG x11
PACKAGECONFIG[x11] --with-x=yes --with-gdktarget=x11,--with-x=no,${X11DEPENDS}
xf86-video-intel-2.21.9
/home/jiahongxu/yocto/poky/meta/recipes-graphics/xorg-driver/xf86-video-intel_2.21.9.bb
PACKAGECONFIG None
PACKAGECONFIG[xvmc] --enable-xvmc,--disable-xvmc,libxvmc
PACKAGECONFIG[sna] --enable-sna,--disable-sna
[YOCTO #4368]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove the function keyword.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Apparently $[...] isn't valid in dash, so use $((...)) instead for
mkefidisk.sh and ddimage that both start with $!/bin/sh.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
As python-multiprocessing requires python-threading and
python-pickle, this commit adds them as runtime dependency.
The observed behavior was:
When typing 'import multiprocessing' in the python shell on a
minimal image with only the python-multiprocessing recipe installed,
python reports at first:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module>
from multiprocessing.util import SUBDEBUG, SUBWARNING
File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module>
import threading # we want threading to install it's
ImportError: No module named threading
After adding python-threading as runtime dependency and rebuilding
the image, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module>
import _multiprocessing
ImportError: No module named cPickle
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Don't pass arguments to bitbake as a single one,
because this will break when the bitbake double-exec
is removed.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Be more descriptive about the revision we are running on
in the global results file: add branch:commit and git describe fields.
Also add the sizes for tmp dir not only times. (previously these were
only available in the output.log)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
On systems with dash as /bin/sh there were failures while invoking ddimage.
Fix to let it work with both bash and dash shells.
[YOCTO #4617]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some automounters are rather overzealous and like to mount things
immediately after partitioning. This can happen if the disk is being
reused and the partitions align exactly with the existing partitions
which have already been formatted. Move the unmount code into a function
and call it before and after partitioning.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When all builds have finished write the hostname, commit and times
on a single line in the global results file (useful for merging later
on files from multiple systems).
Also the final cleaning should be last after writing the results.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When your proxy/network connection is unstable the network sanity test
which runs before every build (because we wipe all the files in the build dir)
can influence build time. Appending CONNECTIVITY_CHECK_URIS = ""
in local.conf will disable the check.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some functions didn't used the same identation as the rest of them,
let's fix that.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
With automounters abounding it makes more sense to attempt to unmount
the device rather than abort, just like ddimage does.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When trying to import python-pprint on a minimal image, it reports that
the cStringIO python module is missing.
This is provided with python-io, so we add python-io as runtime
dependency.
The complete observed trace was:
Python 2.7.3 (default, Apr 4 2013, 07:45:36)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pprint
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/pprint.py", line 40, in <module>
from cStringIO import StringIO as _StringIO
ImportError: No module named cStringIO
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add another test to time bitbake -p with and without cache/ or tmp/cache.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fix revisions
Adds a -p option to allow cherry-picking of fix revisions.
Removes the final build/sstate directories to stop running out of space.
Runs subsequent tasks even if one test fails.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Append results from each run to a single file in order to keep a history.
Also do some cosmetic changes and fix some whitespace.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This script runs a series of builds (core-image-sato by default) with
and without sstate cache and collects some metrics (time and size currently).
It takes a commit as argument (-c <rev>) and measures wall clock for
bitbake core-image-sato and virtual/kernel.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While GPT works fine when writing to actual media, it cannot be reliably
used for distributing disk images as it requires the backup table to be
on the last block on the device, which of course varies from device to
device. Use MSDOS tables instead.
Use mkfs to label the filesystems as msdos tables do not support
partition labeling.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Most firmware implementations use the EFI specified
EFI/BOOT/bootia32.efi (and similar) boot paths. Only broken firmware
uses different paths for removable media. In those cases, the user can
add their own startup.nsh.
For the compliant case, selecting "Shell" from the EFI boot menu should
go to the shell.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without a reliable way of knowing if the target device with be an
asyncronous block device on the target (MMC or USB), err on the side of
caution of always specifcy "rootwait", ensuring the kernel will wait for
the device to appear and not abort if it hasn't appeared in time for
mount.
Document the remaining kernel parameters added by this script on the
same line as rootwait.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no need to boot with "rw". Booting with "ro" will allow for
fsck to be run during boot, and a proper /etc/fstab will still ensure
the rootfs is "rw" by the time the user can interact with the system.
Change the "rw" to "ro" in the kernel parameters specified in the
generated grub.cfg file.
Fixes [YOCTO 4036] mkefidisk.sh hardcodes 'rw' as root mount option
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Keep comments under 80 characters in length.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current script only replaces an existing root= kernel parameter
which can result images created without a root= paremeter, even though
the script expects a target rootfs parameter.
Rather than replacing the root= parameter, delete the root= parameter if
it exists, then append an appropriate root= parameter.
Fixes [YOCTO 4035] mkefidisk.sh forgets to add root= parameter
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The script was creating a FAT fs with EFI files in it, but wasn't setting the GPT GUID.
Using 'gummiboot install' natively failed because of the missing GPT GUID, so fix that. While we're there also set the name to "EFI System Partition".
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The script greps for 'Disk', which doesn't work when your crazy Dutch distro has parted call it 'Schijf', so force LANG=C.
The second problem is that 'Disk' might be a substring in the Model entry:
[root@Angstrom-F16-vm-rpm contrib] # parted /dev/sdc unit mb print
Model: SanDisk SDDR-113 (scsi)
Disk /dev/sdc: 3905MB
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify the include file and script to generate a missing RDEPENDS.
Install python on target with python-io. Import ssl:
Python 2.7.3 (default, Feb 9 2013, 16:04:35)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import ssl
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/ssl.py", line 58, in <module>
ImportError: No module named textwrap
Installing python-textutils solves the issue.
Signed-off-by: MiLo <milo-software@users.sourceforge.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The BB and PM ranges were originally intended to use leading 0s to
ensure all the values were the same string length, making for nice log
filenames and columnar dat files. However, not everyone will do this -
especially if it isn't documented.
Document the intent. Make the generation and parsing of dat files robust
to either method.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
random.py imports hashlib, so add this missing dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Have the script skip:
* "Recipe" lines.
* Lines with 11 "=", not 12.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Sometimes it is convenient to prepare a bootable image from the
host rather than using a live-image to install to a disk on the
target.
This script takes a live image as input, partitions a device, and
performs the installation just as the installer would if run on
the target.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The os.popen function would fail (more or less) silently if the executed
program cannot be found, and here what we need is os.system not os.popen
since it doesn't use the return value, use os.unlink() and ignore
exceptions from it would be better as Chris suggested.
[YOCTO #2454]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Add intercept multilib header for pyconfig.h in python.
This is part of the bug fixing [YOCTO #2216].
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you install the top-level python package only on a minimal
system which has no other python packages installed then python
is not functional at all. Without any extra packages installed
this error is seen:
# python
Traceback (most recent call last):
File "/usr/lib/python2.7/site.py", line 64, in <module>
import traceback
ImportError: No module named traceback
Installing python-lang only partly fixes the problem as this
error still exists:
# python
Traceback (most recent call last):
File "/usr/lib/python2.7/site.py", line 569, in <module>
main()
File "/usr/lib/python2.7/site.py", line 551, in main
known_paths = addusersitepackages(known_paths)
File "/usr/lib/python2.7/site.py", line 278, in addusersitepackages
user_site = getusersitepackages()
File "/usr/lib/python2.7/site.py", line 253, in getusersitepackages
user_base = getuserbase() # this will also set USER_BASE
File "/usr/lib/python2.7/site.py", line 243, in getuserbase
USER_BASE = get_config_var('userbase')
File "/usr/lib/python2.7/sysconfig.py", line 520, in get_config_var
return get_config_vars().get(name)
File "/usr/lib/python2.7/sysconfig.py", line 400, in get_config_vars
import re
ImportError: No module named re
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #1806]
Standard practice is to use the Linux "dd" command to write images to boot
media. This can be error prone and the results of sloppy usage can be
disastrous. Locating the device you want to use is a clumsy process, especially
on a headless build system.
The ddimage script does the following:
o Check the image and device exist
o Check the device is writable
o Compare the device to a blacklist and abort if it's listed
Blacklist defaults to "/dev/sda"
o Display useful identifying information about the image and device
o Prompt the user before commencing the write
The output looks something like this:
$ sudo ~/bin/ddimage tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg /dev/sdk
Image details
=============
image: `tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg' -> `core-image-sato-fri2-noemgd-20111202214038.hddimg'
size: 318568448 bytes
modified: 2011-12-02 13:45:05.298897861 -0800
type: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 16, root entries 512, Media descriptor 0xf8, sectors/FAT 152, heads 64, hidden sectors 32, sectors 622204 (volumes > 32 MB) , serial number 0x4ed946e0, label: "boot ", FAT (16 bit)
Device details
==============
device: /dev/sdk
vendor: Kingston
model: DT 101 G2
Write tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg to /dev/sdk [y/N]? y
Writing image...
303+1 records in
303+1 records out
318568448 bytes (319 MB) copied, 53.6766 s, 5.9 MB/s
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Dexuan Cui <dexuan.cui@intel.com>
CC: Joshua Lock <josh@linux.intel.com>
CC: Kishore K Bodke <kishore.k.bodke@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
COMMERCIAL_LICENSE no longer exists; the equivalent functionality is
now has been replaced by LICENSE_FLAGS_WHITELIST, so replace the
COMMERCIAL_LICENSE warning with a similarly equivalent warning.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
* move 2to3 to separate package and include lib2to3 (was in python-misc)
* fix pattern for python-unittest (was in python-misc because it's in subdirectory now)
* add pydoc_data to python-pydoc (was in python-misc)
* add more stuff to smtpd, audio, codecs, ctypes, html, io, json, mime,
pickle, stringold, xmlrpc
* move all FILES_ details from python recipe to manifest generator so it's in one place
* added manual line break in FILES_${PN}-core, because git send-email
doesn't like too long lines
$ git send-email -1 dfaae65839f0ab23e5b2ae2a68df0f370bca84d2
fatal: /tmp/k8zbDajUNP/0001-python-improve-packaging.patch: 64: patch contains a line longer than 998 characters
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
This script is used to enumerate which recipes are building
documentation. It does this by checking that a -doc package
gets generated and contains files.
The script works by building each recipe using the output from
bitbake -s.
It will generate several report files, listing which recipes
include documentation, which are missing documentation, and
which did not successfully build at all.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
script: add needed files into the python-core package
regenerate python-2.7-manifest.inc file with newer script
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* it needs to be regenerated to actually package something
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
test_build_time.sh is a bash script intended to be used in conjunction
with "git bisect run" in order to find regressions in build time, however
it can also be used independently. It cleans out the build output
directories, runs a specified worker script (an example is
test_build_time_worker.sh) under TIME(1), logs the results, and returns
a value telling "git bisect run" whether the build time is good (under
the specified threshold) or bad (over it).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The bash string operation ${BB##*0} was greedy and in addition to converting
"02" to "2", also converted "20" to "", causing all builds for a BB value ending
in 0 to run with BB_NUMBER_THREADS=1.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Jason Wessel
Stefan Stanacar
Peter Kjellerstedt
Hongxu Jia
Richard Purdie
Chen Qi
Paul Eggleton
Lukas Bulwahn
Darren Hart
Koen Kooi
MiLo
Ross Burton
Robert P. J. Day
Andrei Gherzan
Robert Yang
Lianhao Lu
Gary Thomas
Tom Zanussi
Martin Jansa
Scott Garman
Nitin A Kamble