summaryrefslogtreecommitdiffstats
path: root/scripts/lib/wic
AgeCommit message (Collapse)Author
2020-04-25wic: use Filesystem UUID when expand swap partitionLee Chee Yang
part.get("uuid") return the Partition UUID from the partition table instead of Filesystem UUID. This lead to swap partition UUID not match/change when wic write expand swap partition. change it to read the filesystem UUID using blkid. The output from blkid should looks like this: wic-partvzhiwq3s: LABEL="swap1" UUID="04e55c19-3f3f-4491-9e32-44eea8daa827" VERSION="1" TYPE="swap" USAGE="other" [YOCTO #13313] Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-07Revert "wic: Fix permissions when using exclude or include path"Richard Purdie
This reverts commit 36993eea89d1c011397b7692b9b8d61b499d0171. After discussion on the mailing list it was felt these changes were not ready yet.
2020-04-07Revert "wic: Add --embed-rootfs argument"Richard Purdie
This reverts commit efdcf94801f6abe8e4099e324d9a3deccd8d4384. After discussion on the mailing list it was felt these changes were not ready yet.
2020-04-06wic: Add --embed-rootfs argumentRicardo Ribalda Delgado
This option adds the content of a rootfs on a specific location on the rootfs. It is very useful for making a partition that contains the rootfs for a host and a target Eg: / -> Roofs for the host /export/ -> Rootfs for the target (which will netboot) Although today we support making a partition for "/export" this might not be compatible with some upgrade systems, or we might be limited by the number of partitions. With this patch we can use something like: part / --source rootfs --embed-rootfs target-image /export --embed-rootfs target-image2 /export2 on the .wks file. Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06wic: Fix permissions when using exclude or include pathRicardo Ribalda Delgado
When parameters include_path or exclude_path are passed to the rootfs plugin, it will copy the partition content into a folder and make all the modifications there. This is done using copyhardlinktree(), which does not take into consideration the content of the pseudo folder, which contains the information about the right permissions and ownership of the folders. This results in a rootfs owned by the user that is running the wic command (usually UID 1000), which makes some rootfs unbootable. To fix this we copy the content of the pseudo folders to the new folder and modify the pseudo database using the "pseudo -B" command. Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01wic: align layer plugin pathLee Chee Yang
wic look for external layer source plugin under scripts/lib/ while other tools look for lib/. allow wic to check for source plugin at both scripts/lib/ and lib/ to align with other tools while avoid breaking any existing source plugin in external layer. [YOCTO #13056] Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-03-22wic/direct: reserve 2 sector for extended partitionChee Yang Lee
extended partition should reserve at least 2 unallocated sectors between the start of the extended partition and the start of a logical partition. [YOCTO #13658] Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-03-02wic/engine: lets display an error not a tracebackArmin Kuster
If the requested partition does not exist in this request "wic ls {path}:pnum" display a nice message not a trackback Also fix displaying the pnum and not "%s" Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-03-01wic/engine: dump the partition table in JSON format onlyPierre-Jean Texier
since commit 03154d2cf25c1d5ce908da9e72d324004b8d5722 ("sfdisk: add -J between mutually exclusive options") in util-linux [1], the '-J' can't be used with the '-d' option anymore. So, since we're using json format output, drop the '-d' option. Fixes: ERROR: _exec_cmd: <snip>/usr/sbin/sfdisk -dJ <snip>/core-image-minimal-qemux86-64.wic returned '1' instead of 0 output: sfdisk: mutually exclusive arguments: --list-free --json --dump [1] - https://github.com/karelzak/util-linux/commit/03154d2cf25c1d5ce908da9e72d324004b8d5722#diff-31d5cc325380dbdafe64d0e019846f12 Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-18qemux86: do not add vga=0 to kernel parametersAlexander Kanavin
This was added ages ago to enable GL passthrough with vmware driver, and is no longer relevant, as std or virgl is used instead nowadays. Original commit: commit 072545b1111c5efb66289a4866897429f5fcd969 Author: Richard Purdie <rpurdie@linux.intel.com> Date: Wed Jan 21 17:40:51 2009 +0000 scripts/poky-qemu-internal: Add support for GL passthrough in qemux86 images Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-02-15wic: Honor APPENDKevin Hao
APPEND is used to add additional parameters to kernel by features, such as read-only-rootfs. So we should honor this variable when we compose the kernel parameter in wic. I know we also can resolve this kind of issue by using the .wks.in template introduced by commit 42e870c5ed4b ("image_types.bbclass: support template .wks.in files for wic"), but the APPEND is needed by all the wks, it would seems pretty ridiculous to me to change all the .wks to .wks.in and then foist the APPEND into them. So the APPEND is definitely deserved to export to the wic directly. [Yocto #12809] Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-19wic: fix images build in parallelMaxim Uvarov
OE wic plugins create temporary file with the index of the line tmp file name. This causes race in case several builds run in time. If source_params['file'] is an absolute path, the cr_workdir prefix is not applied by os.path.join(). So instead it writes to a ".1" file next to the original image - this is outside the WORKDIR and at risk of collision. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Suggested-by: Paul Barker <pbarker@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-10wic: Add --include-path argumentPaul Barker
This option adds the contents of the given path to a partition built with the rootfs source plugin. The path is relative to the directory in which wic is running not the rootfs itself so use of an absolute path is recommended. This option is most useful when multiple copies of the rootfs are added to an image and it is required to add extra content to only one of these copies. This option only has an effect with the rootfs source plugin. Signed-off-by: Paul Barker <pbarker@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-10wic: Preserve intermediate filesPaul Barker
When debugging issues or trying to add new features in wic it's useful to examine the intermediate files created by the tool such as images of the individual partitions. Previously these files were created in a subdirectory of IMGDEPLOYDIR and, deleted by wic itself and then the working subdirectory completely removed at the end of IMAGE_CMD_wic. Instead we should work in a staging directory named build-wic and leave behind intermediate files for analysis if necessary. This has the added benefit of allowing individual partition images to be preserved by adding commands to IMAGE_CMD_wic_append() in an image recipe if needed. This is useful where an update system requires exact sized and pre-formatted partition images for deployment. Signed-off-by: Paul Barker <pbarker@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-01-02wic/filemap: If FIGETBSZ iotctl fail, failback to os.statKalle Lampila
Some file systems don't support fetching the block size (notably the file system Docker uses for containers), so if iotctl() fail, try to use failback via os.stat() to get block size. Signed-off-by: Kalle lampila <kalle.lampila@lempea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-27wic: 'wic cp' to copy from imageChee Yang Lee
currently 'wic cp' only works for copy file from local storage to wic image. enhance 'wic cp' to copy file/directory from wic image to local storage. include selftest and 'wic help' updates. [YOCTO#12169] Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-21wic: rm with -r flag supportChee Yang Lee
wic currently unable to remove non-empty directory in ext* partition. enable wic rm to remove non-empty directory and all the sub-content with -r flag. update help documents for 'wic rm'. [YOCTO #12404] Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-14wic: beautify 'wic help'Chee Yang Lee
The Wic help returned to the user is unreadable. Use a custom ArgumentParser to override argparse help message. change help message as suggest in https://bugzilla.yoctoproject.org/show_bug.cgi?id=12205 [YOCTO #12205] changes applies to 'wic help', 'wic -h', 'wic --h' and 'wic --help' Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-10isoimage-isohybrid.py: Parameterize ESP partition sizeHaris Okanovic
Add "esp_extra_blocks" plugin parameter so that caller may change ESP's free space from the default 100 blocks. Signed-off-by: Haris Okanovic <haris.okanovic@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-11-10isoimage-isohybrid.py: Parameterize ESP labelHaris Okanovic
Add "esp_label" plugin parameter so that caller may override default ESP partition label 'EFIimg'. Signed-off-by: Haris Okanovic <haris.okanovic@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-10-23wic/engine: use 'linux-swap' for swap file systemChee Yang Lee
[YOCTO #13312] see https://bugzilla.yoctoproject.org/show_bug.cgi?id=13312 wic/engine.Disk._get_part_image was looking at variable fstypes for supported fstype which is 'swap' but image build with 'linux-swap'. supported fstype should be 'linux-swap'. Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-10-23wic/help: change 'wic write' help descriptionChee Yang Lee
update the help desciption for 'wic write' command to match behaviour. see commit: https://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/scripts/wic?id=74b44e59be89c738f702948f9e16e367c0ba43ba Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-10-19wic/rawcopy: Support files in sub-directoriesEugene Smirnov
If the source file is located in a subdirectory of DEPLOY_DIR rawcopy will currently fail in sparse_copy function on open(dst_fname, 'wb'), as the parent directory for destination file does not exist. This patch helps to avoid that by recursively creating parent directories. Signed-off-by: Eugene Smirnov <evgenii.smirnov@here.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-10-07wic/direct: Partition numbering is broken for MBR primary partition #4Michael Cooper
When wks describes extra partitions that aren't in the partition table (e.g. boot loader) and exactly four primary MBR partitions, the last partition gets added to fstab as partition #5 instead of #4. [YOCTO #13560] Signed-off-by: Michael Cooper <michaelcooper81@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-09-27wic: Using the right rootfs size during prepare_rootfsAlessio Igor Bogani
The commit 8e48b4d6c4 makes wic ignores IMAGE_ROOTFS_SIZE for rootfs size and makes it uses the computed one only. Re-add support for IMAGE_ROOTFS_SIZE variable and compute roots size only if the former is not defined. Moreover the size of a provided directory with --rootfs-dir="" in the .wks file should always be computed on the fly, else every partition will be constrained to be the same size as what ever value was in ROOTFS_SIZE. Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-09-01qemuriscv: Generate a wic rootFS with a larger filesystemAlistair Francis
This allows us to generate a rootFS with a large filesystem for use with QEMU. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-08-08wic: Make disk partition size consistently computedJason Wessel
When using different root directories with a wks file wic is using the value from the original ROOTFS_SIZE which is not correct. Example: Number Start End Size File system Name Flags 1 20.5kB 318MB 318MB fat16 otaefi legacy_boot, msftdata 2 318MB 636MB 318MB ext4 otaboot 3 636MB 1709MB 1074MB ext4 otaroot 4 1709MB 2027MB 318MB ext4 otaboot_b 5 2027MB 3101MB 1074MB ext4 otaroot_b 6 3101MB 5249MB 2147MB ext4 fluxdata The partitions 1, 2, and 3 incorrectly inherit the size, instead of using a computed size. With the patch applied it is working properly: Number Start End Size File system Name Flags 1 20.5kB 14.5MB 14.5MB fat16 otaefi legacy_boot, msftdata 2 14.5MB 65.3MB 50.8MB ext4 otaboot 3 65.3MB 1139MB 1074MB ext4 otaroot 4 1139MB 1190MB 50.8MB ext4 otaboot_b 5 1190MB 2264MB 1074MB ext4 otaroot_b 6 2264MB 4411MB 2147MB ext4 fluxdata As for the removal of the bb.warn, if the size is not specified, it is not something to warn the end user about. Some of my default images make use of the head room + a computed directory size or while generating images. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-08-08wic: Add partition type for msdos partition tablesJason Wessel
In order to create a msdos partition table disk image that can auto expand after the image is copied to an SD card, wic needs the ability to have a primary partition as the last entry. The desired use case is to be able to create an A/B update partition image scheme with a /var volume that can be auto expanded to the remainder of the SD card at run time. The typical .wks file will look similar to the following: bootloader --ptable msdos part / --source rawcopy --sourceparams="file=u-boot.imx" \ --ondisk mmcblk --no-table --align 1 --size 1 part /boot --source bootimg-partition \ --ondisk mmcblk --fstype=vfat --label boot --active --align 4 --size 16 part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \ --ondisk mmcblk --fstype=ext4 --label otaboot --align 4 --type logical part / --source rawcopy --sourceparams="file=imx6.otaimg" \ --ondisk mmcblk --fstype=ext4 --label otaroot --align 4 --type logical part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \ --ondisk mmcblk --fstype=ext4 --label otaboot_b --align 4 --type logical part / --source rawcopy --sourceparams="file=imx6.otaimg" \ --ondisk mmcblk --fstype=ext4 --label otaroot_b --align 4 --type logical part /var --source rawcopy --sourceparams="file=imx6_var.otaimg" \ --ondisk mmcblk --fstype=ext4 --label fluxdata --align 4 Without the patch applied, wic will generate an SD card image that looks like: Disk boot.img: 890940s Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 2056s 48001s 45946s primary fat16 lba 2 48008s 132467s 84460s primary ext4 3 132472s 454467s 321996s primary ext4 4 454471s 890939s 436469s extended lba 5 454472s 538931s 84460s logical ext4 6 538936s 860931s 321996s logical ext4 7 860936s 890939s 30004s logical ext4 boot With the patch applied a primary partition can be created at the end of the image which can be expanded to fill the free space on the media where the image has been copied, which looks like: Disk boot.img: 890940s Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 2056s 48001s 45946s primary fat16 lba 2 48007s 860931s 812925s extended lba 5 48008s 132467s 84460s logical ext4 6 132472s 454467s 321996s logical ext4 7 454472s 538931s 84460s logical ext4 8 538936s 860931s 321996s logical ext4 3 860936s 890939s 30004s primary ext4 boot Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-23wic/plugins: Source that support both EFI and BIOSWilliam Bourque
Add a source plugin that support both EFI and legacy PC-Bios. While using this plugin, both bootloaders configurations reside in the same /boot partitions. This plugin has very little code : to avoid code duplication, we simply re-import bootimg-pcbios and bootmg-efi source and call both their SourcePlugin methods. Signed-off-by: William Bourque <wbourque@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-18wic: Fix (again) partition files UIDs on multi rootfs imagesRicardo Ribalda Delgado
Commit 450335ba5e73a375eb9932b4c4cf37979640dbfc copies the pseudo database to the working directory in order to have ownership information when the filesystem is generated. Unfortunately this does not work anymore. The filenames on the database are absolute and there is no information about the new directory. Instead of fixing the database, we could redo a bit the way we patch the fstab file. Now I am saving the old contents of fstab, modifying the file and then reverting the changes on exit. This is faster than the previous approach, although it can cause indeterminism if the application is killed before finishing. Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-07-17wic: add support for kernel with initramfs bundledChee Yang Lee
when INITRAMFS_IMAGE_BUNDLE and INITRAMFS_IMAGE are set, wic should look for kernel with initramfs image bundled. Include required variable MACHINE, INITRAMFS_IMAGE_BUNDLE, INITRAMFS_IMAGE, INITRAMFS_LINK_NAME and KERNEL_IMAGETYPE in WICVARS. No longer require default value for variable kernel as KERNEL_IMAGETYPE is not optional variable and included in WICVARS. image_types_wic to inherit kernel-artifact-names to obtain default INITRAMFS_LINK_NAME when INITRAMFS_IMAGE_BUNDLE are set. update wic.Wic2.test_image_env test case to filter optional variable INITRAMFS_LINK_NAME, INITRAMFS_IMAGE and INITRAMFS_IMAGE_BUNDLE. Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-28wic: python2 -> python3Robert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-19wic/bootimg-efi: allow multiple initrdChee Yang Lee
Allow plugin bootimg-efi to configure with multiple initrd through source parameter. Uses ; to separate each initrd. e.g: --sourceparams="loader=${EFI_PROVIDER},initrd=initrd1;initrd2" Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-11wic/plugins: kernel image refer to KERNEL_IMAGETYPEChee Yang Lee
replaced hardcoded kernel image with KERNEL_IMAGETYPE. set kernel image to "bzImage" incase KERNEL_IMAGETYPE not set. Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-08wic/filemap: handle FIGETBSZ failingRoss Burton
Some file systems don't support fetching the block size (notably the file system Docker uses for containers), so handle the iotctl() failing and raise the expected error. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-06-07wic/engine: include .wks.in in wic search and listChee Yang Lee
allow wic to list and search for kickstart file in .wks.in extension. basename show by wic list images to fully exclude extension. Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-05-30wic: bootimg-efi: add label source parameterChee Yang Lee
Add new source parameter label to allow custom boot.conf/grub.cfg label, so far it's hardcoded to "Boot". Default label to "Boot" for systemd-boot and blank for grub-efi when source parameter label are not set. Signed-off-by: Chee Yang Lee <chee.yang.lee at intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-05-15wic/bootimg-efi: replace hardcoded volume name with labelChee Yang Lee
volume name should refer to --label in .wks. Replace the hardcoded volume name with label. set "ESP" as default name when no lable specified. Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-05-09meta/lib+scripts: Convert to SPDX license headersRichard Purdie
This adds SPDX license headers in place of the wide assortment of things currently in our script headers. We default to GPL-2.0-only except for the oeqa code where it was clearly submitted and marked as MIT on the most part or some scripts which had the "or later" GPL versioning. The patch also drops other obsolete bits of file headers where they were encoountered such as editor modelines, obsolete maintainer information or the phrase "All rights reserved" which is now obsolete and not required in copyright headers (in this case its actually confusing for licensing as all rights were not reserved). More work is needed for OE-Core but this takes care of the bulk of the scripts and meta/lib directories. The top level LICENSE files are tweaked to match the new structure and the SPDX naming. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-04-26Revert "wic: Set a miniumum FAT16 volume size."Angus Lees
This reverts commit f7dfb4d43247d3c13a4e0a3853007d63b9512b83. FAT16 volumes do not have a minimum size of 8250 blocks (== slightly over 4MB). Exhibit A: floppy disks. The original commit message suggests this was a workaround for a bug in parted - in which case we should fix it there, or use the wic `--fixed-size` option to pass down an enforced minimum from a more context-aware point in the callstack. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-04-03wic/engine: Add missing newlineRichard Purdie
On some hosts the wic.Wic2.test_wic_cp_ext selftest was failing as files weren't being copied into the rootfs with "wic cp". This was due to a bug added by: http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=89d4a8df074598cfb3a76e41db7c45d845afd961 where there should be a second newline added at the end of the expression due to the difference in the way echo -e and printf behave. [YOCTO #13237] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-28wic: Ensure that sourceparams values can contain '='Jan Kiszka
This allows '--sourceparams key1=val1=val11,key2=val2'. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-15wic/engine: Fix missing parted autobuilder failuresRichard Purdie
OE-Core rev: a88bcbae850a2e6d182291d3f8e167aabdbe4842 broke the ability to find parted as it may be in sbin which is not in PATH for some users on some distros. Iterate on the original patch to fix this and also fix the original problem. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-14wic/engine.py: Load paths from PATH environment variableWilliam Bourque
Load self.paths from environment variable and if it fails, fall back to hardcoded list. This is required for users that would need to load different e2fsprogs binaries if their system's ones are not recent enought Signed-off-by: William Bourque <wbourque@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-02-14scripts/lib/wic/engine: Fix cp's target path for ext* filesystemsLeonardo Augusto
Python subprocess' shell=True defaults to /bin/sh[1][2], which often refers to a POSIX-compliant shell. As the -e flag is not defined in the POSIX standard[3], some shells may interpret "-e" as the first argument to the echo command, causing the rest of the command line to fail. In this particular case, "echo -e 'cd {}'" is interpreted as "-e cd {}", which causes the first line of the command to fail, and causing cp to always place the source file in the filesystem's root. Replacing "echo -e" for a printf command makes this more portable. This issue only affects "wic cp" for ext* filesystems. [1] https://docs.python.org/2/library/subprocess.html [2] https://docs.python.org/3/library/subprocess.html [3] http://pubs.opengroup.org/onlinepubs/9699919799 Signed-off-by: Leonardo Augusto <leobsd@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-16wic: sdimage-bootpart: Use mmcblk0 drive instead of bogus mmcblkAlexey Brodkin
Apparently either nobody ever used sdimage-bootpart.wks or fstab was kept untouched due to "--no-fstab-update" usage as some boards like IMX may have, see [1]. Otherwise addition of the following line to the target's fstab: ---------------------->8----------------- /dev/mmcblkp1 /boot vfat defaults 0 0 ---------------------->8----------------- gets us unusable target: ---------------------->8----------------- [* ] A start job is running for dev-mmcblkp1.device (23s / 1min 30s) [ TIME ] Timed out waiting for device dev-mmcblkp1.device. [DEPEND] Dependency failed for /boot. [DEPEND] Dependency failed for Local File Systems. You are in emergency mode. After logging in, type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, "systemctl default" or "exit" to boot into default mode. Press Enter for maintenance ---------------------->8----------------- Fix it with use of "mmcblk0" device name. [1] https://lists.yoctoproject.org/pipermail/meta-freescale/2018-February/022156.html Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Cc: Maciek Borzecki <maciek.borzecki@gmail.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2019-01-14wic: allow bitbake variables in kickstarter filesRasmus Villemoes
image_types_wic.bbclass has a mechanism for doing variable substitution on .wks files by simply letting the input file be called .wks.in. However, that doesn't allow using variables in files included via the include directive. This is unfortunate, because lacking either the ability to include other files or variable substitution leads to fragile and error-prone duplication between kickstarter files and recipes/configuration files used for various boards. This adds (somewhat naive) support for variable substitution in all files parsed by wic. The user should add all required variables to WICVARS to get them exported appropriately. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-16wic: bootimg-efi: add a title source parameterMing Liu
Sometimes the users might want to change the title showing on UEFI booting screen, so far it's hard-coded to 'boot'. There is not a easy way to customize it in current design, I tried firstly with '--configfile', but that does not work with --use-uuid, since the later option will generate a UUID and write it to boot config, only when the former option is not enabled. So a new source parameter 'titile' is added in this patch, it defaults to 'boot' to be consistent with the original title. Signed-off-by: Ming Liu <liu.ming50@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-11-06wic: use explicit errno importRoss Burton
os.errno doesn't work in Python 3.7 and shouldn't have ever worked, so use import errno explicitly. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-10-16wic: search nonarch STAGING_DATADIR for multilibKai Kang
It fails to build multilib image such as lib32-core-image-minimal with wic by set 'IMAGE_FSTYPES = "wic"': | ERROR: Couldn't find correct bootimg_dir, exiting When multilib is enabled, STAGING_DATADIR is expanded with MLPREFIX. But dependencies of images such as syslinux is still populated to nonarch STAGING_DATADIR. Search nonarch STAGING_DATADIR to fix the error. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 05:06:35 +0000