| Age | Commit message (Collapse) | Author |
|---|
|
Add relative path if file is under directory.
[YOCTO #13738]
Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If do_patch task is disabled then prepare do_configure dependencies to
fetch external sources and create symlink to ${S} in devtool workspace.
[YOCTO #13036]
Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The fix for [Yocto #13994] required the rootfs directory to be copied
(using hardlinks if possible) when modifying the fstab file under wic.
We can optimise this copy away for filesystems where we have the tools
to modify the contents of the partition image after it is created. For
ext2/3/4 filesystems we have the debugfs tool and for msdos/vfat
filesystems we have the mcopy tool. So for any of these filesystems we
skip the modification of the fstab file in the rootfs directory (and
skip the associated copy unless it is otherwise necessary) and update
the contents of fstab directly in the partition image.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, wic updates the /etc/fstab in the rootfs to include details
of additional partitions described in the selected wks file. If this
modification is performed in place, other tasks which create an image
file from the rootfs directory (e.g. do_image_tar and do_image_ext4)
will pick up the modified fstab file which would not be appropriate for
those images as they do not include the additional partitions described
in the wks file. wic does undo modifications to the fstab file once it
has finished creating the filesystem image, however this leaves open a
race condition if one of the other tasks reads the contents of the fstab
file from the rootfs directory between the point where wic modifies the
fstab file and the point where wic restores the files original content.
This could be solved by adding a lockfile for tasks which use the rootfs
directory to ensure that no other such task is reading the rootfs
directory while do_image_wic is running. This would serialize several
do_image_* tasks and result in slower builds, especially for large
images. Another drawback of this solution is that it is hard to
selectively optimise - adding lockfiles to do_image_* tasks would result
in these tasks always being serialized even if no fstab modification
will take place.
An alternative solution is to copy the rootfs directory when fstab needs
to be modified. The code to do this in wic already exists as it is
needed when including or excluding content in the rootfs. This still
results in an impact on build times but the copy uses hardlinks if
possible (so little data is actually copied) and we can make selective
optimisations to improve things. The rootfs copy will only take place if
fstab modification is required (or if it was already needed to include
or exclude rootfs content). We can also follow up with further
optimisations after this commit. So this second solution is chosen.
Fixes [Yocto #13994]
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To exclude content from the rootfs, wic makes a copy (using hardlinks if
possible) of the rootfs directory and associated pseudo db, then removes
files & directories as needed. However if these files and directories
are removed using the python functions os.remove and shutil.rmtree, the
copied pseudo db will not be updated correctly. For files copied from
the original rootfs, if hardlinks were used successfully when copying
the rootfs this should mean that the relevant inodes can't be reused and
so the risk of pseudo aborts should be avoided. However, this logic
doesn't apply for directories (as they can't be hardlinked) or for files
added via the '--include-path' argument (as they weren't present in the
original rootfs) and so there remains some risk of inodes being reused
and the pseudo db becoming corrupted.
To fix this, use the 'rm' command under pseudo when removing files &
directories from the copied rootfs to ensure that the copied pseudo db
is updated.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a path is specified for the internal wic working directory using
the -w/--workdir argument then it must not already exist. Re-using a
previous workdir could easily result in rootfs and intermediate files
from a previous build being added to the current image.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before adding a npmsw fetcher to a recipe we
should first check if the generated shrinkwrap file
contains dependencies.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes a crash with "find" when running a native tool and *-native
directories do not exist under the binary directory in the sysroot.
This happened because the directory wildcard was passed as part of the
root directory.
The directory wildcard is now passed by "-name", which returns an empty
result if no matching directory.
Signed-off-by: Adrian Herrera <adrian.herrera@arm.com>
Change-Id: Iba7acd8bbd7e0beb4d25c984f6af7a4fd21486e6
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows programs from HOSTTOOLS (e.g. 'install', 'rm', 'mv', etc) to
be more easily executed by wic. Without this change only programs from
an actual *-native recipe built by bitbake can be executed by wic.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the path for the temporary workdir used by wic to be set
when running wic from bitbake or directly from the command line.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
vfat/msdos filesystem should have fsuuid in format 0xYYYYYYYY where "0x"
in front follow with 8 hexadecimal number in uppercase. In wic, when using
custom fsuuid for vfat/msdos partition in wks, it is able to set the value
in any length, with or without leading "0x". This can cause fsuuid
missaligned when fstab updates, fstab expect exactly 10 character
fsuuid for vfat/msdos partition and all in uppercase.
if custom fsuuid for vfat/msdos is set, check the length and format,
error if it exceed the format size. Amend it so it is align with format
0xYYYYYYYY. This is done before image create and fstab update to ensure the
fsuuid are same in all followup process. if custom fsuuid length less than
expected, fill in "0".
[YOCTO #14161]
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The empty wic plugin is used to create unformatted empty partitions for wic
images.
To use it you must pass "empty" as argument for the "--source" parameter in
the wks file. For example:
part foo --source empty --ondisk sda --size="1024" --align 1024
Also adds a selftest for this plugin where the 'Fstype' column from 'wic
ls' should be empty for the second partition as listed in
test_empty_plugin.wks.
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add "payload_dir" parameter so user can add other files/dirs
to the ISO.
Signed-off-by: Chaitanya Vadrevu <chaitanya.vadrevu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Steps to reproduce:
echo "IMAGE_INSTALL_append = \" udev-hwdb lib32-udev-hwdb\"" >> conf/local.conf
When install both udev-hwdb and lib32-udev-hwdb as above,
there comes below do_populate_sdk error:
$ bitbake core-image-sato -c populate_sdk
ERROR: Task (/path/core-image-sato.bb:do_populate_sdk) failed with exit code '134'
NOTE: Tasks Summary: Attempted 5554 tasks of which 0 didn't need to be rerun and 1 failed.
$ cat /path/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r5/pseudo/pseudo.log
[snip]
inode mismatch: '/path/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r5/sdk/image/usr/local/oecore-x86_64/sysroots/core2-64-poky-linux/lib/udev/hwdb.bin' ino 427383040 in db, 427383042 in request.
[snip]
It is because both udev-hwdb and lib32-udev-hwdb will generate
${SDK_OUTPUT}/${SDKTARGETSYSROOT}/lib/udev/hwdb.bin during do_populate_sdk
and it triggers pseudo error.
So clean hwdb.bin before generate hwdb.bin to avoid conflict to
fix the above do_populate_sdk error.
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If nothing else is specified, 'git init' uses its default repository
template from the install location (e.g. /usr/share/git-core/templates),
which already includes an info/ subdirectory. However, when setting
init.templateDir to a different template path in ~/.gitconfig, this
isn't necessarily the case, and it can lead to setup_git_repo() failing
with stack traces like:
File: '.../scripts/lib/devtool/__init__.py', lineno: 234, function: setup_git_repo
0230: pass
0231: if 'singletask.lock\n' not in excludes:
0232: excludes.append('singletask.lock\n')
0233: bb.warn("try writing excludefile")
*** 0234: with open(excludefile, 'w') as f:
0235: for line in excludes:
0236: f.write(line)
0237:
0238: bb.process.run('git checkout -b %s' % devbranch, cwd=repodir)
Exception: FileNotFoundError: [Errno 2] No such file or directory: '.../devtooltmp-6m36b181/workdir/foobar-1.0.1/.git/info/exclude'
Fix this edge case by creating the .git/info/ directory first.
Fixes: 334ba846c795fc0d8c73 (2018-02-01, "devtool: set up git repos so that singletask.lock is ignored")
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If --branch and --branch2 are the same, there is extra confusing data plotted
onto the graph. Only do that if the branches are actually different.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If buildstats is missing, avoid a backtrace.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This variable isn't used at all.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adjust wic to correctly handle the new PSEUDO_IGNORE_PATH variable and avoid
inode corruption issues.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a pretty big change to the way pseudo operates when used in OpenEmbedded.
Normally, pseudo monitors and logs (adds to its database) any file created or
modified whilst in a fakeroot environment. There are large numbers of files
we simply don't care about the permissions of whilst in that fakeroot context,
for example ${S}, ${B}, ${T}, ${SSTATE_DIR}, the central sstate control
directories,
This change uses new functionality in pseudo to ignore these directory trees,
resulting in a cleaner database with less chance of "stray" mismatches if files
are modified outside pseudo context. It also should reduce some overhead from
pseudo as the interprocess round trip to the server is avoided.
There is a possible complication where some existing recipe may break, for
example, we found a recipe which was writing to "${B}/install" for
"make install" in do_install and since we listed ${B} as not to be tracked,
there were errors trying to chown root for files in this location.
This patch fixes a few corner cases in OE-Core when used with this new
ignore list:
* The archiver directory matched a "${WORKDIR}/deploy*" pattern so was renamed
to something else since that directory does need its root permissions
* The ${S} and ${B} ignoring is conditional on them being different to ${WORKDIR}
* package_write_* task output (the debs/rpms/ipks) are now owned by the build
user so we don't want the file ownership information in the hashequiv outhash
calculation even if they are built under pseudo.
* The fontcache postinstall intercept is run under qemu outside of pseudo context
so delete files it may delete up front where pseudo can see this.
* SSTATE_DIR is in PSEUDO_PATHS_IGNORE, which is in FAKEROOTENV which is cached
by bitbake. We therefore need to trigger reparsing if this changes, which means
SSTATE_DIR can be in BB_HASHBASE_WHITELIST but not BB_HASHCONFIG_WHITELIST.
Rework the variables to handle this. This otherwise breaks some of our sstate
tests in oe-selftest.
* Ignore the temp directory wic uses for rebuilding rootfs.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RNG passthru has been enabled on all qemu machines but its being added
to each one of them, with this patch its turned into QB variables which
defaults to host passthru, yet it can be overridden if needed via
machine or config metadata if needed.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This means ot matches the rest of the system rather than causing confusing errors
where multiple python versions are mixed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of assuming that the buildhistory is stored in ./buildhistory
unless told otherwise, use the environment variable BUILDDIR if present
(which is set by oe-init-build-env) to locate the buildhistory
directory.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
and bootimg-partition
Due to recent changes in bootimg-efi to include IMAGE_BOOT_FILES,
when both bootimg-partition and bootimg-efi occur in a single .wks
and IMAGE_BOOT_FILES are defined, files listed in IMAGE_BOOT_FILES
will be duplicated in both partition.
Since IMAGE_BOOT_FILES are crucial for bootimg-partition, but
optional for bootimg-efi, hence allowing bootimg-efi to have the option
to ignore it.
The new variable, IMAGE_EFI_BOOT_FILES, was added to help handle this
issue. Its basic usage is the same as IMAGE_BOOT_FILES.
Usage example:
${IMGDEPLOYDIR}/${IMAGE_BASENAME}-${MACHINE}.ext4;rootfs.img \
This commit is also squashed with the updated testcase to cover for
this change.
[YOCTO #14011]
Signed-off-by: Khairul Rohaizzat Jamaluddin <khairul.rohaizzat.jamaluddin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Support publishing the sdk-update as well as the sdk installer in one
go.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Escaping does not work in my use case. It must be escaped for
python, ssh and shell as well as for different versions of echo.
Let's try it a little less elegant, but hopefully more reliable.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have an issue where qemu is being starved of resources on our autobuilders.
We can't raise its priority without special capacilties, therefore add a hook
which if present can allow this to happen using an executable
"~/runqemu-renice".
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a package contains hard links to a file, the file size is added for
each hard link instead of once for the file. Therefore, the calculated
size may be much larger than the actual package size.
For example, the mesa-megadriver package contains several hard links to
the same library.
Keep track of the inode numbers when listing the files that are
installed and use the actual size only for the first occurrence of an
inode. All further hard links to the same inode are added to the file
list, but accounted with size 0.
All file names need to be added to the file list, because the list is
used for preserving the files/hard links on the target.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
/bin is also a valid path where one can find executables. Add
that to the search path.
Signed-off-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* I have recipes which use variable inside SRC_URI, e.g.:
ROS_BRANCH ?= "branch=release/melodic/swri_nodelet"
SRC_URI = "git://github.com/swri-robotics-gbp/marti_common-release;${ROS_BRANCH};protocol=https"
and devtool modify works fine, but devtool finish fails with:
$ devtool finish --force-patch-refresh swri-nodelet meta-ros/meta-ros1-melodic/
...
Traceback (most recent call last):
File "/OE/openembedded-core/scripts/devtool", line 334, in <module>
ret = main()
File "/OE/openembedded-core/scripts/devtool", line 321, in main
ret = args.func(args, config, basepath, workspace)
File "/OE/openembedded-core/scripts/lib/devtool/standard.py", line 2082, in finish
updated, appendfile, removed = _update_recipe(args.recipename, workspace, rd, args.mode, appendlayerdir, wildcard_version=True, no_remove=False, no_report_remove=removing_original, initial_rev=args.initial_rev, dry_run_outdir=dry_run_outdir, no_overrides=args.no_overrides, force_patch_refresh=args.force_patch_refresh)
File "/OE/openembedded-core/scripts/lib/devtool/standard.py", line 1737, in _update_recipe
mode = _guess_recipe_update_mode(srctree, rd)
File "/OE/openembedded-core/scripts/lib/devtool/standard.py", line 1721, in _guess_recipe_update_mode
params = bb.fetch.decodeurl(uri)[5]
File "/OE/bitbake/lib/bb/fetch2/__init__.py", line 390, in decodeurl
raise MalformedUrl(url, "The URL: '%s' is invalid: parameter %s does not specify a value (missing '=')" % (url, s))
bb.fetch2.MalformedUrl: The URL: 'git://github.com/swri-robotics-gbp/marti_common-release;${ROS_BRANCH};protocol=https' is invalid: parameter ${ROS_BRANCH} does not specify a value (missing '=')
let it expand the SRC_URI before trying to decode it.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The autobuilder managed to pass the nographic option with "sdl gl" due
to a problem elsewhere. It would have been useful for runqemu to have
errored rather than passing conflicting options to qemu. Add an
error for this invalid usecase.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allows the --offset argument to use the "s" or "S" suffix to specify
that it is reporting the number of 512 byte sectors.
This is required for some SoCs where the mask ROM looks for an item at a
sector that isn't aligned to a 1KB boundary.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu help reports that gtk or sdl option is needed with gl or gl-es
option. But if user forgot to add gtk or sdl option, then gl or gl-es
options were silently skipped.
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code should check /dev/vhost-net instead of /dev/kvm. And
the permission check logically belongs to the part when kvm-vhost
is enabled. Also fix the URL to point to the correct wiki page.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Daniel Ammann <daniel.ammann@bytesatwork.ch>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
layer under test should absent from BBLAYERS when running
yocto-check-layer. This allow to get signatures before layer
under test. There are existing steps to add the layer under
test to BBLAYERS after getting initial signatures.
add steps to check for layer under test in BBLAYERS before
running any test, skip test for the layer if the layer under
test exist in BBLAYERS.
[YOCTO #13176]
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
List of files defined using IMAGE_BOOT_FILES are installed into
the boot partition when preparing an image using the wic tool with
the bootimg-efi source plugin.
The code snippet introduced is taken as is from bootimg-partition.py
Change-Id: I8dbb6b4e7c24870f587a6f31e6ae4a87d7033782
Issue-Id: PLATFORMS-3134
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For some filesystems, such as aufs which may be used by docker container,
don't support either the SEEK_DATA/HOLE or FIEMAP to get the block
map. So add a FileNobmap class to fall back to standard copy when there
is no way to get the block map.
[Yocto #12988]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This method is not used by any code, so drop it.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This method is not used by any code, so drop it.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python now expects regex strings to be prepended with r.
Silence pylint/autopep8 and similar warnings by identifying
these regex patterns as... regex patterns.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[Bug 13971] https://bugzilla.yoctoproject.org/show_bug.cgi?id=13971
A recipe using LICENSE=CLOSED would normally not have LIC_FILES_CHKSUM
set.
If LIC_FILES_CHKSUM was not set, it would cause `devtool upgrade` to fail.
This fixes the issue by defaulting to an empty string if
LIC_FILES_CHKSUM is not found.
[YOCTO #13971]
Signed-off-by: Bjarne Michelsen <bjarne_michelsen@hotmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LAYERDEPENDS is a string of this format:
"DEPEND1 (optional version) DEPEND2 (optional version) ..."
However when we parse LAYERDEPENDS in _get_layer_collections() we
parse it as a simple string, and if any optional versions are there the
'depends' field is wrong. For example, running yocto-check-layer
might result in such errors:
ERROR: Layer meta-python depends on (>= and isn't found.
ERROR: Layer meta-python depends on 12) and isn't found.
Let's use bb.utils.explode_dep_versions2() to parse LAYERDEPENDS, and
create a string that contains all dependencies, effectively
skipping/ignoring any optional versions.
[YOCTO #13957]
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no way to use runqemu and turn off the no-reboot flag with a
command line argument. If someone really wants it back it can be
added with the qemuparams="" argument.
Also if you use the "halt -p" from user space, the qemu will exit when
it is complete. It is impossible to test self deploying image with
runqemu if you cannot reboot the device. One might argue that you can
run runqemu in a loop, but that defeats the purpose of having a
wrapper around a tool that already does what is needed in the first
place.
For the vmtype images, the -no-reboot flag should not be added.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Autobuilder generated checksum files only have a single space between the sum and the
filename, tweak it to account for this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes issues with openssl certs not working properly which meant error
reporting to an error report server was failing.
Also, all our downloads are now standarised on "sha256sum" so adjust for that.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Tomasz Dziendzielski
Paul Barker
Sinan Kaya
Kamel Bouhara
Adrian Herrera
Lee Chee Yang
Alexander Kanavin
Peter Kjellerstedt
Diego Sueiro
Chaitanya Vadrevu
Mingli Yu
Ross Burton
Roland Hieber
Richard Purdie
Khem Raj
Khairul Rohaizzat Jamaluddin
Adrian Freihofer
Michael Tretter
Vijai Kumar K
Martin Jansa
Joshua Watt
Vasyl Vavrychuk
Chen Qi
Daniel Ammann
Khasim Mohammed
Kevin Hao
Tim Orling
Bjarne Michelsen
Nicolas Dechesne
Jason Wessel