summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-04-07build-appliance-image: Update to master head revisionyocto-3.12020-04-dunfell2020-04Richard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-07Revert "u-boot: cmd/gpt.c: fix memory leak"Richard Purdie
This reverts commit 32f01f9e72089d4412cef5da80970c99c651cc49.
2020-04-07build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-07libubootenv: update to latest git hashMax Krummenacher
This adds the missing feature 'negative offsets' which was present in the orginal U-Boot based tools. git change log: * f4b9cde Allow negative offsets * 45bf92a Detect sector size if not found in config * 9f59db6 uboot_env: remove unused variables * 65d243e README: libubootenv is now in oe-core Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-07u-boot: cmd/gpt.c: fix memory leakSakib Sajal
Fixes CVE-2020-8432, a double free introduced by commit 18030d04d25d7c08d3deff85881772a520d84d49 CVE: CVE-2020-8432 Signed-off-by: Sakib Sajal <sakib.sajal@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-07parselogs.py: update network interface related messagesChangqing Li
along with systemd upgrade, error message related change network interface have changed, update it. Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-07Revert "dhclient: not always skip the nfsroot interface"Mingli Yu
This reverts commit[27aec88 dhclient: not always skip the nfsroot interface] which used to address the IP address renew issue when boot a system in a nfsroot fs and altogether boot with ip=dhcp. But reported by some tester, the above commit introduces below issue when run ltp test on a nfsroot system which boot with ip=dhcp: nfs: server 192.168.100.1 not responding, still trying nfs: server 192.168.100.1 not responding, still trying [snip] So revert the above commit now to avoid blocking test. Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-07qemu: fix CVE-2020-11102Lee Chee Yang
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-07Revert "wic: Fix permissions when using exclude or include path"Richard Purdie
This reverts commit 36993eea89d1c011397b7692b9b8d61b499d0171. After discussion on the mailing list it was felt these changes were not ready yet.
2020-04-07Revert "wic: Add --embed-rootfs argument"Richard Purdie
This reverts commit efdcf94801f6abe8e4099e324d9a3deccd8d4384. After discussion on the mailing list it was felt these changes were not ready yet.
2020-04-06build-appliance-image: Update to master head revisionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06runqemu-extract-sdk: fix install debugfs on rootfsAdrian Freihofer
At least with my current setup and acc. the manual, the images are named like image-dbg.rootfs.tar.bz2. The filter has two bugs: - expects something like -dbg.tar - tar without compression suffix is not allowed Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06apt-native: don't let dpkg overwrite files by defaultJan Luebbe
With --force-overwrite (implied by --force-all), dpkg will not abort when a package overwrites files from different packages. As this can also lead to "The following package disappeared from your system as all files have been overwritten by other packages: <package>" and subsequently broken dependencies, this makes the simple case of conflicting files hard to debug. Instead of finding all possibly required force options, only disable overwrite for now. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06systemd: Package systemd-hwdb-update.service into udevKhem Raj
Currently, this unit is packaged into udev-hwdb which then adds it as rdep instead of rrecommends to systemd itself, this meant that even if we added udev-hwdb to BAD_RECOMMENDATIONS, it would not be respected since its a rdep, therefore move the service unit file into udev package instead, this decouples the hard runtime dependency and restores the bad recommendations expectations Signed-off-by: Khem Raj <raj.khem@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06pseudo: During DB fix, remove files that do not existRicardo Ribalda Delgado
If a file does not exist, either because it has been removed outside bitbake, or because only some of the files have been moved to a different location, delete it from the pseudo-db is the user decides to fix the database. Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06wic: Add --embed-rootfs argumentRicardo Ribalda Delgado
This option adds the content of a rootfs on a specific location on the rootfs. It is very useful for making a partition that contains the rootfs for a host and a target Eg: / -> Roofs for the host /export/ -> Rootfs for the target (which will netboot) Although today we support making a partition for "/export" this might not be compatible with some upgrade systems, or we might be limited by the number of partitions. With this patch we can use something like: part / --source rootfs --embed-rootfs target-image /export --embed-rootfs target-image2 /export2 on the .wks file. Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06wic: Fix permissions when using exclude or include pathRicardo Ribalda Delgado
When parameters include_path or exclude_path are passed to the rootfs plugin, it will copy the partition content into a folder and make all the modifications there. This is done using copyhardlinktree(), which does not take into consideration the content of the pseudo folder, which contains the information about the right permissions and ownership of the folders. This results in a rootfs owned by the user that is running the wic command (usually UID 1000), which makes some rootfs unbootable. To fix this we copy the content of the pseudo folders to the new folder and modify the pseudo database using the "pseudo -B" command. Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06pseudo: Force seccomp to return success when in fact doing nothingRichard Purdie
Pseudo changes the syscall access patterns which makes it incompatible with seccomp. Therefore intercept the seccomp syscall and alter it, pretending that seccomp was setup when in fact we do nothing. If we error as unsupported, utilities like file will exit with errors so we can't just disable it. This works around issues on platforms where seccomp is enabled in file (e.g. archlinux). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-06Windows: Enable Windows builds under WSLv2 and warn accordinglyAlejandro Hernandez Samaniego
Due to the architectural changes between Windows Subsystem for Linux v2, and WSL v1 it should now be possible to run bitbake on the several distros offered through the Microsoft Store. WSLv2 is available on Windows 10 build number > 18917 The current build number may be checked by opening a cmd prompt on Windows and running: C:\Users\myuser>ver Microsoft Windows [Version 10.0.19041.113] If a distro has already been installed via the Microsoft Store, then we can check which WSL version its using by opening a Windows Powershell (notice this is a powershell and not a cmd prompt): C:\WINDOWS\system32> wsl -l -v NAME STATE VERSION * Ubuntu Running 2 Debian Stopped 1 In this case it shows two distros installed, Ubuntu running WSLv2 and Debian running WSLv1 To change the version of WSL being used by a certain distro run: C:\WINDOWS\system32> wsl --set-version <Distro> 2 e.g C:\WINDOWS\system32> wsl --set-version Debian 2 For more information on installing WSLv2 please look at: https://docs.microsoft.com/en-us/windows/wsl/wsl2-install There are some caveats related to the way storage is handled by WSLv2 though, and at this point these have to be managed by the user manually, the storage space used by WSL is not reflected immediately and since bitbake heavily uses storage, after several builds this can prove to be a bit of an issue. WSLv2 uses a VHDX file for storage, this issue can be easily avoided by optimizing this file every now and then, this can be done via the following: 1.- Find the location of your VHDX file: - Get the distro app package directory. - Open Windows Powershell as Administrator and run: Get-AppxPackage -Name "*<DISTRO>*" | Select PackageFamilyName e.g.: PS C:\WINDOWS\system32> Get-AppxPackage -Name "*Ubuntu*" | Select PackageFamilyName PackageFamilyName ----------------- CanonicalGroupLimited.UbuntuonWindows_79abcdefgh Replace the PackageFamilyName (and your user) on the following path: C:\Users\<user>\AppData\Local\Packages\<PackageFamilyName>\LocalState\ e.g. ls C:\Users\<user>\AppData\Local\Packages\CanonicalGroupLimited.UbuntuonWindows_79abcdefgh\LocalState\ Mode LastWriteTime Length Name -a---- 3/14/2020 9:52 PM 57418973184 ext4.vhdx The VHDX file path is: C:\Users\<user>\AppData\Local\Packages\CanonicalGroupLimited.UbuntuonWindows_79abcdefgh\LocalState\ext4.vhdx 2.- Optimize your VHDX file (Also on Powershell): - Make sure WSL is shutdown wsl --shutdown - Optimize it optimize-vhd -Path C:\Users\<user>\AppData\Local\Packages\CanonicalGroupLimited.UbuntuonWindows_79abcdefgh\LocalState\ext4.vhdx -Mode full A progress bar should be shown while optimizing the VHDX file. As an example, after building core-image-sato, removing the TMPDIR did not reflect any changes on Windows Explorer for storage space being used, after optimizing the VHDX file, 14 extra GB were shown as free. So, as long as the the user optimizes its storage, the builds should run smoothly. This patch warns the user that is running bitbake under WSLv2, that they should optimize the VHDX file eventually to avoid storage issues. The same check previoulsy used for WSLv1 works for WSLv2, checking for the kernel version: WSLv1: Linux version 4.4.0-19041-Microsoft (Microsoft@Microsoft.com) WSLv2: Linux version 4.19.84-microsoft-standard (oe-user@oe-host) Builds have been tested under Ubuntu and Debian distros offered and installed through the Microsoft Store, and other distros should be able to run builds just as fine. Performance wise, using the same hardware, and same configuration a comparison between builds using native Linux vs WSLv2 for the following targets has been performed: - core-image-minimal - core-image-sato - core-image-sato-sdk - meta-toolchain No real evidence of any performance changes could be found, with WSLv2 builds running even faster in some cases. Running a recently built image can be done just as smoothly, if using "nographic" as argument for runqemu, or if its a graphical image, installing an X server and running runqemu runs just as fine. Happy bitbaking. Signed-off-by: Alejandro Hernandez Samaniego <alejandro@enedino.org> Signed-off-by: Alejandro Hernandez Samaniego <alhe@linux.microsoft.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-05busybox: sysctl: ignore EIO of stable_secret below /proc/sys/net/ipv6/confYi Zhao
Avoid confusing messages caused by EIO on reading /proc/sys/net/ipv6/conf/*/stable_secret if those are not set yet. Make it behave the same as procps(>=3.3.13). Fixes: $ sysctl -a | grep ipv6.conf | grep stable_secret sysctl: error reading key 'net.ipv6.conf.all.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.default.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.eth0.stable_secret': Input/output error sysctl: error reading key 'net.ipv6.conf.lo.stable_secret': Input/output error Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-05icu: Mark strtod_l unavailable on muslKhem Raj
Musl version is just a wrapper to strtod and not an exposed API Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-05icu: Add knobs to generate a subset of ICU dataKhem Raj
Recent versions of ICU (64+) provides a tool for configuring ICU locale data file with finer granularity [1] Default generated size for libicudata.so.66.1 is ~27M, which is quite large for embedded systems and all of them may not even need all locale data. This patch calls the icudata buildtool during configure on the icudata and utilizes a filter called 'filter.json` ( empty by default) to create the data, default behavior should remain same but someone can add a filter.json in own layer to configure this data, e.g. { "localeFilter": { "filterType": "language", "whitelist": [ "en", "de", "it" ] } } would only generate the locale data for english/german/italian This would reduce the size of libicudata.so.66.1 to 12M Ensure that icudata is generated using host-tools so it can deal with endianness correctly, when host and target systems have different endianness install the icudtata file back into in/ folder so that main build can now pickup this data file instead of regenerating it and wiping out the filter changes that are expected to take effect Use native compiler tools Update the big-endian support patch to apply to latest Makefile.in from icudata source and mark it as backport defer applying 0001-Fix-big-endian-build.patch after moving new data/ in [1] https://github.com/unicode-org/icu/blob/master/docs/userguide/icu_data/buildtool.md Signed-off-by: Khem Raj <raj.khem@gmail.com> Suggested-by: Wouter Meek <w.meek@metrological.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-05binutils: Use configure options to disable gdb and dependenciesKhem Raj
Deleting sources is a rough way of dealing with disabling components, using configure option is elegant way and we also keep the sources unchanged, this should not cause any funcitonal changes otherwise Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-05scripts/install-buildtools: refactor for Python 3.4Tim Orling
Our least common denominator supported distro is debian-8 which has python 3.4. The whole point of the install-buildtools script is to make it easier on the user to install buildtools tarball. So it needs to run on Python 3.4. The way we checked if the install was successful in the prior version of the script was not workable in python 3.4. Since the environment-setup-... script is currently just exporting environment variables, use os.environ to do the equivalent from values gleaned via regex from the environment-setup-... file. Corrected a couple minor whitespace errors NOTE: License changed to GPL-2.0-only due to inclusion of code copied directly from bitbake/lib/bb/utils.py. This avoids the need to depend on bitbake, which is now Python 3.5+ only. Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-03sanity.bbclass: echo current SDK_VENDOR if it is invalidPaul Gortmaker
It can be frustrating if this sanity check triggers, but you don't know why; you haven't explicitly set any SDK vars, or similar. At least echo out the offending value, so the end user has a bit more information to go on. Before: SDK_VENDOR should be of the form '-foosdk' with a single dash After: SDK_VENDOR should be of the form '-foosdk' with a single dash; found '-overc-sdk' Cc: Ross Burton <ross.burton@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-03nativesdk-binutils: correct path to ld.so.confJeremy Puhlman
The alternative ld.so patch is set up so the linker will search the nativesdk sysroot before searching the host filesystem. However the patch concatenates <sysroot>/etc and /etc/ld.so.conf leading to a path that does not exist: 3061991 openat(AT_FDCWD, "/buildtools/sysroots/x86_64-pokysdk-linux/etc/etc/ld.so.conf", O_RDONLY) = -1 ENOENT (No such file or directory) In native-nspr, the build uses -lpthread, which triggers a search for librt, but because of the above it drags in the system librt leading to errors as follows: /buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/gcc/x86_64-pokysdk-linux/ 9.3.0/../../../../x86_64-pokysdk-linux/bin/ld: /lib64/librt.so.1: undefined reference to `__clock_getcpuclockid@GLIBC_PRIVATE' update concatenation to correctly construct the path to the nativesdk ld.so.conf [YOCTO #13853] Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-03cdrtools-native: remove use of REALPV in versioningrpjday@crashcourse.ca
There appears to be no need for the use of REALPV in the recipe for cdrtools-native as the downloaded tarball has the official version in it. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-03glib-2.0: Backport GMainContext fixesDaniel Gomez
Backport fixes introduced in 2.63.6 for memory leaks and memory corruption in GMainContext Upstream merge: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1353 Fixes SIGSEGV in GStreamer: Thread 2 "multihandlesink" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7ffff6bb9700 (LWP 18045)] 0x00007ffff7d65992 in g_source_unref_internal (source=0x7ffff00047d0, context=0x55555561c800, have_lock=1) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:2146 2146 ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c: No such file or directory. (gdb) bt #0 0x00007ffff7d65992 in g_source_unref_internal (source=0x7ffff00047d0, context=0x55555561c800, have_lock=1) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:2146 #1 0x00007ffff7d65bb6 in g_source_iter_next (iter=iter@entry=0x7ffff6bb8db0, source=source@entry=0x7ffff6bb8da8) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:980 #2 0x00007ffff7d67ef3 in g_main_context_prepare (context=context@entry=0x55555561c800, priority=priority@entry=0x7ffff6bb8e30) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:944 #3 0x00007ffff7d6896b in g_main_context_iterate (context=context@entry=0x55555561c800, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:3900 #4 0x00007ffff7d68b4c in g_main_context_iteration (context=0x55555561c800, may_block=may_block@entry=1) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:3981 #5 0x00007ffff6be4482 in gst_multi_socket_sink_thread (mhsink=0x555555679ab0 [GstMultiSocketSink]) at ../../../gst-plugins-base-1.14.4/gst/tcp/gstmultisocketsink.c:1164 #6 0x00007ffff7d8fb35 in g_thread_proxy (data=0x55555565c770) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gthread.c:784 #7 0x00007ffff7841ebd in start_thread (arg=<optimized out>) at pthread_create.c:486 #8 0x00007ffff7aa12bf in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 #8 0x00007ffff7aa12bf in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 Signed-off-by: Daniel Gomez <daniel@qtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-03busybox: on upgrade save busybox if it is the last shellJeremy Puhlman
During a busybox upgrade on a ipk based system, it is possible that busybox is the only shell in the system. During the uninstall the alternative for /bin/sh is removed and everything after that goes down hill. * Add a check to verify if busybox is the shell, and save it to the busyboxrm directory created in tmp. Then add an alternative for /bin/sh that points to that busybox at the lowest priority. * Add PATH to the busyboxrm directory using shell(as during an upgrade busybox and its links are missing). * When install over remove extra busybox if present. deb and rpm are uneffected by the bug because they both drag in bash, however neither upgrade seemed to have issue with the changes. [YOCTO 13850] Signed-off-by: Jeremy A. Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-03cmake: fix Python executable with cmakeMartin Kelly
Currently, CMake has two ways of finding Python executables: FindPythonInterp and FindPython/FindPython3. FindPythonInterp is deprecated and may be removed at some point. Currently, python3native sets PYTHON_EXECUTABLE, which FindPythonInterp uses. This is a problem for a few reasons: - Setting PYTHON_EXECUTABLE as an environment variable doesn't work, as CMake needs it to be set as an explicit CMake option via -D. - Projects using the newer FindPython/FindPython3 don't pickup the right Python, as the newer routines use Python_EXECUTABLE and Python3_EXECUTABLE. Fix this by setting PYTHON_EXECUTABLE, Python_EXECUTABLE, and Python3_EXECUTABLE using -D options to EXTRA_OECMAKE. The CMake routines are documented below: https://cmake.org/cmake/help/latest/module/FindPythonInterp.html https://cmake.org/cmake/help/latest/module/FindPython.html https://cmake.org/cmake/help/latest/module/FindPython3.html Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-02prservice.py: fix do_package with newer Python in Ubuntu 20.04Martin Jansa
* with Ubuntu 20.04 which is using python 3.8 I'm seeing a lot of errors like: ERROR: libxml2-2.9.10-r0 do_package: Can NOT get PRAUTO, exception No module named '_sysconfigdata' not sure what caused this from python 3.8, but this seems to work * PRserv is enabled with: PRSERV_HOST = "localhost:0" Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-02cve-update-db-native: fix DB file version for '-'Lee Chee Yang
fix logic for CVE DB update so that when the CPE version is '-', it keeps the version as '-' in the DB file too and leave other operation as blank. Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-02sanity: Require gcc 5.0 minimum versionRichard Purdie
After polling various develoeprs, its clear that many layers are struggling with gcc 4.8 and its better for the project to adopt 5.0 as a minimum version at this point in time. We should have technology like buildtools-extended-tarball available to ensure things still work on Centos 7 and Debian 8. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-02dhcp: add RDEPENDS for dhcp-clientMingli Yu
Add iproute2 RDEPENDS for dhcp-client as /sbin/dhclient-systemd-wrapper which called by dhclient.service depends on ip command which provided by iproute2 package when systemd enabled in DISTRO_FEATURES. Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-02dhclient: not always skip the nfsroot interfaceMingli Yu
Don't skip the nfsroot interface when use dhcp to get the address for nfsroot interface as the nfsroot interface may need dhclient to renew the lease. Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-02u-boot: Restore valid default environment for running systemOtavio Salvador
One significant change from previous OE-Core releases was the move from u-boot-fw-utils to libubootenv which offers a generic and not machine specific alternative. However, it is not fully functional as currently we don't provide the default environment nor the required configuration file to be used by it. This change address this and include on the default u-boot.inc the needed code to generate, install and deploy the default environment. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-02perf: fix compile error when rebuildingChangqing Li
Fix error like: Makefile.perf:597: recipe for target 'intel_x86_64-wrs-linux/perf/1.0-r9/perf-1.0/perf-in.o] Error 2 Makefile.perf:220: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 during rebuilding, when kernel version changed, some source files also maybe changed. It could happened that the source under ${S} messed up with some already dropped files and also new files. Fix by clean the ${S} before copy source files. Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01gstreamer1.0-plugins-good: Fix build when egl is enabled but no x11/waylandKhem Raj
This fixes build errors seen in no-x11/no-wayland configuration ( eglfs ) and when QT5 support is enabled Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01inetutils: Use alternatives to avoid manpage conflictOvidiu Panait
Fix the following manpage conflicts: * check_data_file_clashes: Package inetutils-doc wants to install file /usr/share/man/man1/tftp.1 But that file is already provided by package * tftp-hpa-doc * check_data_file_clashes: Package inetutils-doc wants to install file /usr/share/man/man8/tftpd.8 But that file is already provided by package * tftp-hpa-doc * check_data_file_clashes: Package netkit-telnet-doc wants to install file /usr/share/man/man8/telnetd.8 But that file is already provided by package * inetutils-doc Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01wic: align layer plugin pathLee Chee Yang
wic look for external layer source plugin under scripts/lib/ while other tools look for lib/. allow wic to check for source plugin at both scripts/lib/ and lib/ to align with other tools while avoid breaking any existing source plugin in external layer. [YOCTO #13056] Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01binutils: Do not build gold linker on mips/glibcKhem Raj
Using gnu_hash style is unsupported on gold for now therefore disable building gold on mips/glibc Certain applications poke for presence of gold linker and silently use it (webkit), therefore its best to disable building it Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01lib/oe/package_manager: don't try to rm /var/lib/opkgJan Luebbe
As opkglibdir starts with a /, os.path.join will ignore self.target_rootfs, leading to an attempt to remove /var/lib/opkg. This only fails if it exists on the host, explaining why this remained undiscovered for long. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01lib/oe/package_manager: avoid installing provided packages via aptJan Luebbe
If there already is a package providing (and conflicting against) packages what should be installed, apt will try remove the conflicting package (target-sdk-provides-dummy) and any that depend on it (like apt and dpkg). This usually fails because of the protection of essential packages. In that case, no -dev/-dbg packages are installed to the SDK. Avoid this problem by checking which packages are already provided and removing them from the list to be installed. Also sort the list to make it easier to read when debugging. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01lib/oe/package_manager: collect provided package names when using debsJan Luebbe
This is needed for a later change to avoid installing packages which are already provided by an installed package. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01lib/oe/package_manager: fix handling of last packageJan Luebbe
In commit 7d214b34e11dc57316ed5c1c7747c4601286f6d2, only the code in the for loop was modified to store the pkgarch value. The code used if there was no empty line at the end was not modified. Instead of fixing the duplicated code, remove it and just make sure that a final empty line is processed. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01lib/oe/package_manager: make sure to not remove packages in apt installJan Luebbe
apt install can decide to remove already installed packages if there are conflicts. Avoid this by explicitly specifying --no-remove. This will then cause a "E: Packages need to be removed but remove is disabled." message. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01scripts/oe-buildenv-internal: Add pointer to scripts/install-buildtoolsRichard Purdie
If the minimum python version isn't met, show a pointer to the new install-buildtools script. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01openssl: update to 1.1.1fAlexander Kanavin
This also un-breaks python3 ptest which got broken with 1.1.1e update. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01install-buildtools: bump default to yocto-3.1_M3, fixesTim Orling
Add ability to check md5sum (yocto-3.1_M2 and before) or sha256 (yocto-3.1_M3 and beyond). Make regex for path in checksum file optional, since for yocto-3.1_M3 the format is <checksum> <filename>, but prior releases was <checksum> <path><filename> Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2020-04-01sanity.bbclass: add test for gcc < 4.8Tim Orling
It is known that old versions of gcc prior to 4.8 causes builds to fail. Add a test for BUILD_CC == 'gcc' and gcc < 4.8 and recommend using scripts/install-buildtools or user built buildtools-extended-tarball. Use the new get_host_compiler_version function from lib/oe/utils.py NOTE: another solution is to install devtoolset-6+ from scl [1], but this is a rather large install (> 1 Gb) and fairly invasive. [1] https://www.softwarecollections.org/en/scls/rhscl/devtoolset-6/ Adding this code means we can increase the minimum version easily in the future too (which will soon be needed). RP: Change minimum version from 5.0 to 4.8 for initial patch Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-16 20:37:00 +0000