| Age | Commit message (Collapse) | Author |
|---|
|
* The benefits:
- Really support ext4
- Support the sparse file (we lost the sparse file in the image in the
past, the sparse file became into the common file)
- Fix the error reported by fsck: (ext2/ext3)
Inode 1025, i_size is 16384, should be 17408.
- Have a uniform code for ext2/3/4 generation
* Comments from Darren Hart:
Basically, genext2fs doesn't support creating ext4 filesystems. It
creates, as I understand it, an ext2 filesystem, then adds a journal,
and sets some bits. It can't support the newer features like extents. So
what we end up with is a bit of a hack for a filesystem.
The ext tools (e2fsprogs) unfortunately don't provide an integrated
solution for generating prepopulated filesystem images as many other
mkfs* tools do. One thing missing was symlink support in libext2fs. I
added that support and demonstrated a script which uses the e2fsprogs
debugfs tool that can populate the newly formatted filesystem from a
directory and without root privileges.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When a test module wants to be skipped because it doesn't
apply to the image but it was nevertheless a required
test (one in TEST_SUITES), we issued an warning that it
was a required test and went on with running the module.
Usually all tests in the module failed (e.g gcc tests on a non-sdk image),
but this allowed us to know that something went wrong with the image
(some package/feature didn't make it).
However, instead of just issuing an warning and running the tests
it's better to throw an exception. The traceback will tell us what's wrong,
and we don't run every single test method.
Output will look like this:
--snip--
| NOTE: Test modules ['oeqa.runtime.ping', 'oeqa.runtime.ssh', 'oeqa.runtime.gcc']
| NOTE: Found 5 tests
| test_ping (oeqa.runtime.ping.PingTest) ... ok
| test_ssh (oeqa.runtime.ssh.SshTest) ... ok
| ERROR
|
| ======================================================================
| ERROR: setUpModule (oeqa.runtime.gcc)
| ----------------------------------------------------------------------
| Traceback (most recent call last):
| File "/mnt/back/yocto/poky/meta/lib/oeqa/runtime/gcc.py", line 8, in setUpModule
| skipModule("Image doesn't have tools-sdk in IMAGE_FEATURES")
| File "/mnt/back/yocto/poky/meta/lib/oeqa/oetest.py", line 108, in skipModule
| "\nor the image really doesn't have the requred feature/package when it should." % (modname, reason))
| Exception:
| Test gcc wants to be skipped.
| Reason is: Image doesn't have tools-sdk in IMAGE_FEATURES
| Test was required in TEST_SUITES, so either the condition for skipping is wrong
| or the image really doesn't have the requred feature/package when it should.
|
| ----------------------------------------------------------------------
| Ran 2 tests in 1.036s
|
| FAILED (errors=1)
| NOTE: Sending SIGTERM to runqemu
--snip--
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Downloads iptables/cvs/sudoku-savant sources and builds them on target.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This class can be used for test cases that configure
and build packages on target.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Tweak QemuRunner so we can actually restart the
qemu target in a test (if we want more memory for example).
Also add a restart method to the base test class so that tests
can use it.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add class to be inherited by smart tests, along with more basic tests and tests
using a rpm repository.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Decorators should return whatever the decorated methods return.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Save host IP address to host_ip.
Read /proc/PID/cmdline on host to look for IPs of target and host;
instead of running 'ps'.
Also removed some extra empty lines from file.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
to the target
It can be used by smart repo/channel tests to serve deploy_dir.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Copies to target rpm-doc file from deploy_dir
and tries to install and then remove that package.
rpm-doc was chosen because it's small, it only adds
a few files to target, and it's almost always found in
deploy_dir for images with package-management/rpm.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Copies a 5MB to target using scp, more of an
network test than a scp one.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New test which verifies some usual commands functionality with PAM support
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New test which verifies the usage of skeleton init script available with meta-skeleton layer
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New logrotate test which verifies the log directory change in logrotate.conf.
Needs an image with logrotate installed.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This test checks that at least one path in RTLDLIST exists.
Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This test runs a perl script on the target and checks the output.
Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Checks that an x86-64-x32 image has the right binaries.
Signed-off-by: Alexandru Georgescu <alexandru.c.georgescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
In networks that don't have a DHCP server configured, ipv4 address
allocation fails and the ipv4 structure doesn't get populated.
The patch checks this case also.
[YOCTO #3945]
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu at intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The default command-line options for launching busybox's syslogd are
"-C" if using sysvinit; but because we use /etc/default/busybox-syslog
when using systemd which the sysvinit initscript doesn't use, and no
/etc/default/busybox-syslog is installed by default in OE-Core, the
default arguments with systemd were no arguments at all with OE-Core
alone. Effectively merge in the bbappend from meta-oe that adds a
default file in order to set the default options to "-C" for systemd as
well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We do not want libpam to build using audit just
because it happens to be lying around, so we
create PACKAGECONFIG[] data to give us explicit
control.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We add PACKAGECONFIG[] data for audit and move
the current pam related stuff into it's own entry.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This script is originally from Darren Hart, it will be used for creating
the ext* filesystem from a given directory, which will replace the
genext2fs in image_types.bbclass at the moment, we may use the mke2fs to
replace this script again when it has the initial directory support.
Changes of the script:
* Rename it from mkdebugfs.sh to populate-extfs.sh
* Add a simple usage
* Add checking for the number of the parameters
* Add the "regular empty file" and "fifo" file type
* Set mode, uid and gid for the file
* Save the command lines to a file and batch run them
* Change the error message
* Improve the performance
* Add the support for hardlink
[YOCTO #3848]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
do_write doesn't fully set up the first extent header on a new
inode, so if we write a 0-length file, and don't write any data
to the new file, we end up creating something that looks corrupt
to kernelspace:
EXT4-fs error (device loop0): ext4_ext_check_inode:464: inode #12: comm
ls: bad header/extent: invalid magic - magic 0, entries 0, max 0(0),
depth 0(0)
Do something similar to ext4_ext_tree_init() here, and
fill out the first extent header upon creation to avoid this.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We only read the cache when:
bufsize == sizeof(struct ext2_inode)
then we should only update the cache in the same condition, otherwise
there would be errors, for example:
cache[0]: cached ino 14 when bufsize = 128 by ext2fs_write_inode_full()
cache[1]: cached ino 14 when bufsize = 156 by ext2fs_read_inode_full()
Then update the cache:
cache[0]: cached ino 15 when bufsize = 156 by ext2fs_read_inode_full()
Then the ino 14 would hit the cache[1] when bufsize = 128 (but it was
cached by bufsize = 156), so there would be errors.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Let debugfs do sparse copy when src is a sparse file, just like
"cp --sparse=auto"
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The max length of debugfs argument is 256 which is too short, the
arguments are two paths, the PATH_MAX is 4096 according to
/usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux
systems), that's also what the ss library uses.
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
- path normalization ('normalize' flag, defaults to enabled)
- existence verification for paths we know should exist ('mustexist' flag)
- supports clean handling of relative paths ('relativeto' flag)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
After stat -h is executed, the return code is 1.
This patch changes it to 0.
Signed-off-by: Zhangle Yang <zhangle.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add patch substitute-tests.patch that works around automake
TESTS limitation.
See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13771.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Functions atomic_add(s) and atomic_sub(s) are defined with 'extern
__inline__' that may cause compile fails when cross compile for mips.
The error message looks like:
| pcm/.libs/libpcm.a(pcm_meter.o): In function
`snd_pcm_meter_update_scope':
| .../alsa-lib-1.0.27.2/src/pcm/pcm_meter.c:139: undefined reference to
`atomic_sub'
Replace the 'extern __inline__' with 'static __inline__' to fix this
issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
connman 1.17 is mainly a bugfix release,
as such, recommended to upgrade to.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove the disable_graphite.patch because the --without-graphite2
configure option can be used instead.
Split package into harfbuzz and harfbuzz-icu. The ICU support is
now built into a separate library that will be shipped in a
different package.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If runqemu is used without actually building any qemu images (i.e. you
downloaded the images) it's likely that qemu-helper-native hasn't been built.
Instead of just saying what command can't be found, tell the user how to solve
their problem.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
There are three potential NULL pointer dereference in
EVP_DigestInit_ex(), dh_pub_encode() and dsa_pub_encode()
functions.
Fix them by adding proper null pointer check.
[YOCTO #4600]
[ CQID: WIND00373257 ]
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We use GNU libiconv seprate package on uclibc
specifying this makes the configure clear of not
trying to detect glibc/iconv and then also finding
libiconv in sysroot and confusing itself with errors like
| gconvert.c:66:2: error: #error GNU libiconv not in use but included iconv.h is from libiconv
| #error GNU libiconv not in use but included iconv.h is from libiconv
| ^
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
As postinsts aren't run for nativesdk packages when populating an SDK, we need
to prepopulate up-front.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We need this for certain nativesdk recipes, as we can't rely on the
certificate path or bundle path being the same across distros, and it's useful
in many cases on the target as well.
This is based on the 20130119 recipe from meta-oe, with the following changes:
- use the debian git repository to avoid vanishing sources
- obey our target paths
- default to a sysroot relative to the script location (make relocatable)
- define SUMMARY
- don't inherit autotools, this isn't an autotools package
- add MPL-2.0 to LICENSE, as that's the license of the certdata
- install the script man page
- use a native rather than cross recipe, as it's not bound in any way to the
target system
- add nativesdk to bbclassextend, for use in SDKs
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Bring in some changes from the meta-oe version of this script in order
to bring them closer together. (Unfortunately it does not completely
supersede the recipes in meta-oe - there is still some unification to be
done between x11-common and xserver-common.)
* Add systemd support (with extensions for ROOTLESS_X)
* Remove sudo from RDEPENDS_${PN} since this hasn't been used by this
for a long time
* Rearrange recipe slightly to make the order logical
A couple of additional improvements at the same time:
* Use ROOT_HOME for root's home directory
* Set short description in SUMMARY instead of DESCRIPTION
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
Robert Yang
Stefan Stanacar
Mihai Prica
Mihai Lindner
Alexandru Palalau
Cornel Stoicescu
Alexandru Georgescu
Jonathan Liu
Paul Eggleton
Marko Lindqvist
Joe Slater
Christopher Larson
Zhangle Yang
Saul Wold
Kai Kang
Cristian Iorga
Ross Burton
Xufeng Zhang
Jackie Huang
Khem Raj