| Age | Commit message (Collapse) | Author |
|---|
|
Copies a 5MB to target using scp, more of an
network test than a scp one.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New test which verifies some usual commands functionality with PAM support
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New test which verifies the usage of skeleton init script available with meta-skeleton layer
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New logrotate test which verifies the log directory change in logrotate.conf.
Needs an image with logrotate installed.
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This test checks that at least one path in RTLDLIST exists.
Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This test runs a perl script on the target and checks the output.
Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Checks that an x86-64-x32 image has the right binaries.
Signed-off-by: Alexandru Georgescu <alexandru.c.georgescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
In networks that don't have a DHCP server configured, ipv4 address
allocation fails and the ipv4 structure doesn't get populated.
The patch checks this case also.
[YOCTO #3945]
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu at intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The default command-line options for launching busybox's syslogd are
"-C" if using sysvinit; but because we use /etc/default/busybox-syslog
when using systemd which the sysvinit initscript doesn't use, and no
/etc/default/busybox-syslog is installed by default in OE-Core, the
default arguments with systemd were no arguments at all with OE-Core
alone. Effectively merge in the bbappend from meta-oe that adds a
default file in order to set the default options to "-C" for systemd as
well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We do not want libpam to build using audit just
because it happens to be lying around, so we
create PACKAGECONFIG[] data to give us explicit
control.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We add PACKAGECONFIG[] data for audit and move
the current pam related stuff into it's own entry.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This script is originally from Darren Hart, it will be used for creating
the ext* filesystem from a given directory, which will replace the
genext2fs in image_types.bbclass at the moment, we may use the mke2fs to
replace this script again when it has the initial directory support.
Changes of the script:
* Rename it from mkdebugfs.sh to populate-extfs.sh
* Add a simple usage
* Add checking for the number of the parameters
* Add the "regular empty file" and "fifo" file type
* Set mode, uid and gid for the file
* Save the command lines to a file and batch run them
* Change the error message
* Improve the performance
* Add the support for hardlink
[YOCTO #3848]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
do_write doesn't fully set up the first extent header on a new
inode, so if we write a 0-length file, and don't write any data
to the new file, we end up creating something that looks corrupt
to kernelspace:
EXT4-fs error (device loop0): ext4_ext_check_inode:464: inode #12: comm
ls: bad header/extent: invalid magic - magic 0, entries 0, max 0(0),
depth 0(0)
Do something similar to ext4_ext_tree_init() here, and
fill out the first extent header upon creation to avoid this.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We only read the cache when:
bufsize == sizeof(struct ext2_inode)
then we should only update the cache in the same condition, otherwise
there would be errors, for example:
cache[0]: cached ino 14 when bufsize = 128 by ext2fs_write_inode_full()
cache[1]: cached ino 14 when bufsize = 156 by ext2fs_read_inode_full()
Then update the cache:
cache[0]: cached ino 15 when bufsize = 156 by ext2fs_read_inode_full()
Then the ino 14 would hit the cache[1] when bufsize = 128 (but it was
cached by bufsize = 156), so there would be errors.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Let debugfs do sparse copy when src is a sparse file, just like
"cp --sparse=auto"
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The max length of debugfs argument is 256 which is too short, the
arguments are two paths, the PATH_MAX is 4096 according to
/usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux
systems), that's also what the ss library uses.
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
- path normalization ('normalize' flag, defaults to enabled)
- existence verification for paths we know should exist ('mustexist' flag)
- supports clean handling of relative paths ('relativeto' flag)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
After stat -h is executed, the return code is 1.
This patch changes it to 0.
Signed-off-by: Zhangle Yang <zhangle.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add patch substitute-tests.patch that works around automake
TESTS limitation.
See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13771.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Functions atomic_add(s) and atomic_sub(s) are defined with 'extern
__inline__' that may cause compile fails when cross compile for mips.
The error message looks like:
| pcm/.libs/libpcm.a(pcm_meter.o): In function
`snd_pcm_meter_update_scope':
| .../alsa-lib-1.0.27.2/src/pcm/pcm_meter.c:139: undefined reference to
`atomic_sub'
Replace the 'extern __inline__' with 'static __inline__' to fix this
issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
connman 1.17 is mainly a bugfix release,
as such, recommended to upgrade to.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove the disable_graphite.patch because the --without-graphite2
configure option can be used instead.
Split package into harfbuzz and harfbuzz-icu. The ICU support is
now built into a separate library that will be shipped in a
different package.
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If runqemu is used without actually building any qemu images (i.e. you
downloaded the images) it's likely that qemu-helper-native hasn't been built.
Instead of just saying what command can't be found, tell the user how to solve
their problem.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
There are three potential NULL pointer dereference in
EVP_DigestInit_ex(), dh_pub_encode() and dsa_pub_encode()
functions.
Fix them by adding proper null pointer check.
[YOCTO #4600]
[ CQID: WIND00373257 ]
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We use GNU libiconv seprate package on uclibc
specifying this makes the configure clear of not
trying to detect glibc/iconv and then also finding
libiconv in sysroot and confusing itself with errors like
| gconvert.c:66:2: error: #error GNU libiconv not in use but included iconv.h is from libiconv
| #error GNU libiconv not in use but included iconv.h is from libiconv
| ^
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
As postinsts aren't run for nativesdk packages when populating an SDK, we need
to prepopulate up-front.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We need this for certain nativesdk recipes, as we can't rely on the
certificate path or bundle path being the same across distros, and it's useful
in many cases on the target as well.
This is based on the 20130119 recipe from meta-oe, with the following changes:
- use the debian git repository to avoid vanishing sources
- obey our target paths
- default to a sysroot relative to the script location (make relocatable)
- define SUMMARY
- don't inherit autotools, this isn't an autotools package
- add MPL-2.0 to LICENSE, as that's the license of the certdata
- install the script man page
- use a native rather than cross recipe, as it's not bound in any way to the
target system
- add nativesdk to bbclassextend, for use in SDKs
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Bring in some changes from the meta-oe version of this script in order
to bring them closer together. (Unfortunately it does not completely
supersede the recipes in meta-oe - there is still some unification to be
done between x11-common and xserver-common.)
* Add systemd support (with extensions for ROOTLESS_X)
* Remove sudo from RDEPENDS_${PN} since this hasn't been used by this
for a long time
* Rearrange recipe slightly to make the order logical
A couple of additional improvements at the same time:
* Use ROOT_HOME for root's home directory
* Set short description in SUMMARY instead of DESCRIPTION
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
become a bitbake keyword
There is a good chance we might want to support a bitbake operator
"_remove" which works in a similar way to _append and _prepend. As
such, we can't use those keywords in function or variable names.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Introduce the 3.10 kernel. This is based on the 3.10.9 upstream kernel
and replaces the 3.8 recipes, which will be removed once all reference
boards have been updated.
3.10 also the latest LTSI and will be updated with that content when it
becomes available.
Other features of the 3.10 kernel include:
- refreshed -rt support
- refreshed yaffs2, aufs3
- cryptodev
- bfs, edf, and OCF staged features
- scrubbed and updated meta data for v3.10
- improved tools support for meta data updates and queue maintenance
- patch carry forward from all previous linux-yocto kernels and
configuration.
This kernel has been built and boot tested on all qemu machines and architectures.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
kernel commit 24b9f5017 [[media] V4L: Remove deprecated image centering controls]
removed the definitions of V4L2_CID_HCENTER and V4L2_CID_VCENTER after three
years of depreciation.
The ioctl values are still free, and the case statement which processess them
in v4l2 userspace falls through to the proper replacement. So in the short
term, we can explicitly define them using the old absolute values, and everything
will work.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
scripts-Makefile.headersinst-install-headers-from-sc.patch
The autobuilders and their long paths are still triggering errors during
the headers installation. Reinstate the previous patch for this,
after updating for 3.10.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The addition of ptrace_peeksiginfo_args to the uapi in kernel commit
84c751bd [ptrace: add ability to retrieve signals without removing from a queue (v4)]
means that existing applications using glibc versions that define ptrace_peeksiginfo_args
in sys/ptrace.h will get duplicate structure definitions like:
| In file included from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/process.c:66:0:
| /poky-master/build/tmp/sysroots/qemux86/usr/include/linux/ptrace.h:58:8: error: redefinition of 'struct ptrace_peeksiginfo_args'
| struct ptrace_peeksiginfo_args {
| ^
| In file included from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/defs.h:159:0,
| from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/process.c:37:
| /poky-master/build/tmp/sysroots/qemux86/usr/include/sys/ptrace.h:191:8: note: originally defined here
| struct ptrace_peeksiginfo_args
| ^
| make[2]: *** [process.o] Error 1
Reverting to the previous status of not exporting this structure temporarily
fixes applications, until they can be adjusted to not mix sys/ptrace.h and
linux/ptrace.h includes.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Now that the 3.10 kernel has been released we can bump the libc-headers to
that version and remove the 3.8 variant. Userspace compatibility is
maintained through kernel versions, we also make the single 3.10 version the
toolchain default.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Uprev guilt to the latest guilt version from its upstream repository.
As part of the uprev all of the previous changes required for the
yocto kernel tools to use git to manipulate series files have been
dropped. These changes were specific to circumventing parts of guilt's
internal santiy checking to allow specific Yocto kernel manipluation
of sub-series files.
Since the kernel tools no longer need guilt, we can use an up to date
and nearly pure upstream version of guilt.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the kern-tools SRCREV to pick up the following fixes:
60a894e kgit-s2q: add proper commit ID handling for mixed am/apply usage
3b08257 kgit-s2q: delete pruning of path support.
c5868b4 kgit-s2q: Restore implicit exit status to "git apply" section
1bd00b9 kgit-scc: mask warnings from cleanup phase 5
bb75299 kgit-s2q: fix commit warp when running "git am --abort"
ef9571b kgit-scc: cleanup git rebase-apply dir
fdb7d21 kgit-scc: ensure treegen stops if a meta series fails
008987b config: add kconfig cleaning options
69ff569 kgit-s2q: strip blank lines and comments
e7b4540 kgit-init: disable garbage collection on a new tree
417eaed kgit-s2q: delete old LTSI patch dir finding code
21f2200 kgit-scc: better error checking on resume
ad5084c kern-tools: use .meta as meta data container
1deb5d8 kgit-meta: don't push patches without a series file
eb431a1 kgit-s2q: aid patch reject resolution via helper scripts
f859c40 kgit-s2q: only use patch annotations when explicitly asked
333ae18 kgit: speed patch application by batching patches
bf6991d kgit: teach tools about non-default meta dirs
bcfc712 kgit-s2q: usability improvements
cb28803 kgit-s2q: fix patch prefix stripping.
37f40e1 kgit-s2q: warn/exit with error if patch not in series
f4704d2 kgit-s2q: consistent rm usage
e11819c kgit-s2q: standardize on use of git mailinfo
36a5eda kgit: remove guilt dependency
c461a4f spp/scc: export mark commands to meta-series
5311162 updateme: ensure that generated features are only used once
4f7a263 kgit-checkpoint: clear .gitignore for meta branch
21ee6f2 updateme: enforce a matching machine
b08749d kgit-scc: remove -meta files after consruction
These are bug fixes, usability changes as well as the removal of the
guilt dependency. During the uprev of the guilt package, the amount of
circumvention of the typical guilt workflow and checks meant that using
it as a series -> branch manager was no longer appropriate. As a result
a new tools kgit-s2q (series 2 queue) was created based on git-quiltimport,
git am, and the LTSI tree generation scripts.
The result is better series to branch validation, faster application and
a simpler management model. This tool is backwards compatible with any
tree previously constructed with guilt. We are now "guilt free"
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds an init script which instead of the standard bitbake, launches
a memory resident bitbake, defaulting to port 12345. It expects a port
number to use as the first option.
Right now this is experimental but I think its probably worth wrapping
up in a form people can more easily experiment with it. There are some
known issues:
a) It throws some debug output due to the lack of a UI which we need
to clean up
b) It should probably be able to auto select a free port
c) You get a nice backtrace if you specify a build directory but
not a port number
I'd also highlight there are security issues here if you don't trust
users who can connect into localhost. We might need to look at named
pipes or something similar for something limited to the current user.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ant reported on irc that the sstate absolute to relative symlink creation
code wasn't working in klibc. He was correct although the level of breakage is
rather surprising since it only worked for one level of symlink (usr/include) with
everything else being broken.
The reason is probably that nothing really uses absolute paths, we use relative
paths where at all possible already. Nothing in the target sysroot should use
absolute paths for a start. In this regard, the klibc-dev package is broken and
needs fixing. It will currently break when building for one machine, then switching
to another of the same TUNE_PKGARCH and installing from sstate but that is a
separate issue.
This patch fixes the symlink creation code by firstly passing in the correct
value we need (where the symlink will end up) and seccondly, actually using it.
I've also tweaked the debug message to contain appropriate information and got
right of the double "//" value the existing code created in favour of the form
'./..' which looks neater.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xprop is called by xdg-utils scripts.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PCManFm file manager is integrated in Build Appliance;
xdg-utils is also integrated for file
association support.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Alexandru Palalau
Cornel Stoicescu
Alexandru Georgescu
Mihai Prica
Jonathan Liu
Paul Eggleton
Marko Lindqvist
Joe Slater
Robert Yang
Christopher Larson
Zhangle Yang
Saul Wold
Kai Kang
Cristian Iorga
Ross Burton
Xufeng Zhang
Jackie Huang
Khem Raj
Richard Purdie
Bruce Ashfield