| Age | Commit message (Collapse) | Author |
|---|
|
Fix deprecation warnings about invalid escape sequences.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 43542614395150e8fa34133ba0fc7ee90f215bcb)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
This log checking fix is needed for both qemux86 and qemux86-64 so move
to the common section.
[YOCTO #14528]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 2475ce68f0bc1f342c75364dfcfaf7f30499badf)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
We don't use the CD/DVD ROM drive in any of our tests, but it
periodically fails discovery and that leads to a QA error:
[ 6.403477] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
The only way to disable the optical ROM drive in qemu is to use
the '-nodefaults' option, which disables the CDROM (among other things).
We can't be sure that none of our tests, or extended users are relying
on default devices, so using that option is more of a risk than adding
the message to our ignore list.
To date, no one has sent a patch to just disable the optical drive
(either in qemu or the BIOS), but that is something we could consider
in the future.
[YOCTO #14528]
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 143fc5504539c69752ca87717507c197a8920ce5)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
The test uses the broken out time and can only handle about 59s of delay,
use a UNIX timestamp to allow for up to a 300s delay.
[YOCTO #14463]
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit b705e9373acd4119da75af4eb96ec92cc964aa86)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
Some tests such as lttng-tools are marginal and timing out on the autobuilder
with the current 300s default. Increase to avoid this noise in the ptest
failures list.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 5fb902a52e35130af6b0735a087c709daa35655f)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
All of the errors being masked off for qemuarm are legacy from before
the migration of qemuarm to qemuarmv5. Rename the machine to that to
allow for qemuarmv5 to pass parselog test. Light testing shows no
errors in dmesg for qemuarm.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 701a58504de15b244b970908f2de0971a35b5a09)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
This test is flawed since multiple parts of the system can write to the log
and we obtain different numbers of log messages depending on factors we
can't control.
Drop the log testing component of the test.
[YOCTO #12465]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Messages are currently being printed as:
Test requires dropbear, oropenssh-sshd to be installed
but should be
Test requires dropbear, or openssh-sshd to be installed
Adding the space after the 'or' corrects this.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 51596e0f8cebe1607ab64ffb018d51e815c0ee4b)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
We can disable floppy drive by BIOS on a hardware, but an empty floppy
drive is connected by default on qemu-system-x86. Linux usually detect
the device and modprode the matched floppy.ko at the boot stage. Due to
we don't specify a floppy deivce in qemu boot arguments, then the errors
about floppy reading comes out.
It is harmless and normal, so we could ignore this error message on
qemux86.
Seen if kernel-modules is included in the image which pulls in the
relavent kernel module.
https://lists.gnu.org/archive/html/qemu-devel/2021-04/msg01402.html
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 3359f23ee9351c70997d5e0a17d17d1e47d59623)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
Previously doing a stop/start worked, but using a disable/enable does
not work on a read-only rootfs. Add a --runtime flag to systemctl so
that systemd only modifies the current boot and does not attempt to
write to the filesystem.
This also keeps the test from making a permanent (one could argue
policy) change to the running system being tested. i.e. What if the
image being tested had intentionally disabled the timesyncd service in
preference to using chrony or ntpd? The test shouldn't assume that the
user wants the timesyncd service enabled.
Signed-off-by: Wes Lindauer <wesley.lindauer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 43dd83b6a325589368c980a3f17cab90935aaeb0)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
pseries machine emulation ends up with these three messages in kernel
logs which are harmless, so ignore them for now
https://www.mail-archive.com/ubuntu-bugs@lists.ubuntu.com/msg5600561.html
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1827162
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Under systemd weston's socket is in /run, not in /run/user/0.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Distros may not use shadow for login manager
secondly login --help returns 1 only with shadow provided login
utility, with busybox it returns normal 0, the testcase clearly
assumes shadow being part of image, therefore add needed
checks to ensure the pre-requisites are met
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the target is using a read-only rootfs, the available space on '/'
will be zero. This will cause the test to incorrectly fail and skipping
seems appropriate in this case.
Signed-off-by: Wes Lindauer <wesley.lindauer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test mimic the boot_from_runlevel_3 and boot_from_runlevel_5 test cases from oeqa/manual/bsp-hw.json.
The boot_from_runlevel_3 and boot_from_runlevel_5 manual test cases should be remove from oeqa/manual/bsp-hw.json if this patch get merged.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
after suspend state
This test mimic the Test_if_usb_hid_device_works_well_after_resume_from_suspend_state manual test case from oeqa/manual/bsp-hw.json.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test mimic the ethernet_static_ip_set_in_connman and ethernet_get_IP_in_connman_via_DHCP test case from oeqa/manual/bsp-hw.json.
The ethernet_static_ip_set_in_connman and ethernet_get_IP_in_connman_via_DHCP manual test case should be remove from oeqa/manual/bsp-hw.json if this patch get merged.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows spotting ptest regressions without having hard ptest failures
(for that full ptest stability should be achieved).
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test case is checking the command and LAN device behaviour before and after suspend state. The Test_if_LAN_device_works_well_after_resume_from_suspend_state and standby manual test cases from oeqa/manual/bsp-hw can be replace by this runtime test.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
-Improve this test case to fulfill the requirements of replacing the click_terminal_icon_on_X_desktop manual test case from oeqa/manual/bsp-hw :
1) verify that the terminal window is working without problem
2) verify that there's only 1 terminal window is launched
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wayland-utils contains wayland-info utility which deprecates
and replaces weston-info from weston.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Several issues are addressed:
1. weston requires pam when starting under systemd
2. systemd was attempting to launch weston twice (from
sysvinit script and from systemd unit file) which caused confusion
and errors.
3. runtime test should stop/start weston via systemd only if systemd
actually controls system startup, not merely when systemd is present.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test is checking the functionality of the RTC(Real Time Clock). The Check_if_RTC_(Real_Time_Clock)_can_work_correctly manual test case from oeqa/manual/bsp-hw can be replace by this runtime test.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test is checking that the terminal application is able to run. The click_terminal_icon_on_X_desktop manual test case from oeqa/manual/bsp-hw can be replace by this runtime test.
Signed-off-by: TeohJayShen <jay.shen.teoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, weston tests fail when using systemd, fix it by providing
transient unit file and inject it via systemd-run, which generates a
service file automatically and launches another weston instance to test
if it can launch a nested instance. Use systemctl stop to end the
service and cleanup, instead of brutal kill
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It was previously skipped as it was expecting plain connman
to not be in the image, and for core-image-sato connman is always there.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is difficult and error-prone to ensure binutils gets
installed into target images where this test may run;
on the other hand readelf is always present on the
host, as it is a part of HOSTTOOLS.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is difficult and error-prone to ensure binutils gets
installed into target images where this test may run;
on the other hand readelf is always present on the
host, as it is a part of HOSTTOOLS.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This sed expression implements the needed patch to fix compilation with
-fno-common, hopefully this patch will get included in 2.14 release and
we can remove this operation
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #13802]
Make the scp failure non-fatal so the ltp tests continue to run and
the rest of the logs will be available to see afterwards.
Signed-off-by: Mingde (Matthew) Zeng <matthew.zeng@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
testcase test_systemd_failed occasionally failed with below error:
Failed to start Rotate log files.
logrotate.service: Failed with result 'exit-code'.
logrotate.service: Main process exited, code=exited, status=1/FAILURE
error: stat of /var/log/logrotate_test failed: No such file or directory
error: logrotate_test:1 lines must begin with a keyword or a filename (possibly in double quotes)
above failure caused since testcase test_logrotate_wtmp
add /etc/logrotate.d/logrotate_test, which need /var/log/logrotate_test,
but there is no such file. so when logrotate.service is triggerd
by logrotate.timer after testcase test_logrotate_wtmp is runned,
the testcase test_systemd_failed will fail.
these 3 lines are useless, so remove them to fix above problem.
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The output content is created in current directory, because json content
has no defined absolute path to WORKDIR as in bitbake.
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add new decorator which behaves like OEHasPackage, but
fails the testcase if a dependency isn't met.
This helps to identify missing packages in the image
under test when using static test suite lists, otherwise
a missing package won't fail the overall test suite and
errors might slip through unnoticed
Signed-off-by: Konrad Weihmann <kweihmann@outlook.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I took the opportunity to rewrite the recipe from scratch; there was just too much baggage in it.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In multilib build configs libs can be installed in /usr/lib{32,64,x32}
so use libdir to specify the correct ptest directory along with default
/usr/lib.
[YOCTO #12604]
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Existing weston test available make sure that a process
for weston-desktop-shell exist when image boot up.
Enhance weston tests by:
- execute weston-info to make sure weston interface(s)
are initialized
- execute weston and make sure it can initialize a
new wayland compositor (retry checking for
wayland processes up to 5 times)
- enable weston logging for debugging when fail
to initialize wayland compositor
[YOCTO# 10690]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If set default syslog to rsyslog, we can see below messages
in user.log,
[pulseaudio] authkey.c: Failed to open cookie file
[pulseaudio] authkey.c: Failed to load authentication key
They are only warnings when cookie file is not found. And
PulseAudio will create it if it doesn't exist.
refer:
https://wiki.archlinux.org/index.php/PulseAudio/Configuration
https://lists.freedesktop.org/archives/pulseaudio-discuss/2014-December/022719.html
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
along with systemd upgrade, error message related change
network interface have changed, update it.
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set the json result output dir in the oeqe runtime context to create
testresults.json file by default for exported runtime test runs.
Use current datetime for the json result property name (not DATETIME
from build) to allow multiple result entries.
Signed-off-by: Stefan Kral <sk@typedivision.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Stopping systemd-timesyncd doesn't prevent it being restarted by a
different transaction within systemd. Disable the service instead during
the date test to ensure it can't be restarted.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When booting weston images this error is seen commonly, but Qemu boots
the image fine, session seat error is thrown by libweston perhaps using
--seat option or setting XDG_SEAT variable in weston.ini could fix it
[YOCTO #13828]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Stefan Kral <sk@typedivision.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On the system whose cpu doesn't support rdrand,
there comes below message when start rngd service
#systemctl status rngd
[snip]
Feb 25 05:08:14 qemux86-64 rngd[133]: [rdrand]: Initialization Failed
[snip]
Actually the failed message doesn't matter as it
only indicates one entropy source as rdrand fails
to initialize and won't affect rngd function.
So add to ignore the failure message to fix below
error during do_testimage:
NOTE: ======================================================================
NOTE: FAIL: test_parselogs (parselogs.ParseLogsTest)
NOTE: ----------------------------------------------------------------------
NOTE: Traceback (most recent call last):
File "/buildarea/layers/oe-core/meta/lib/oeqa/core/decorator/__init__.py", line 36, in wrapped_f
return func(*args, **kwargs)
File "/buildarea/layers/oe-core/meta/lib/oeqa/runtime/cases/parselogs.py", line 370, in test_parselogs
self.assertEqual(errcount, 0, msg=self.msg)
AssertionError: 1 != 0 : Log: /buildarea/tmp/work/qemux86-64-wrs-linux/wrlinux-image-std/1.0-r5/target_logs/daemon.log
Central error: 2020-03-06T09:45:12.774286+00:00 qemux86-64 rngd[134]: [rdrand]: Initialization Failed
Reference: https://github.com/nhorman/rng-tools/pull/84
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add missing import os statement to the oeqa runtime ptest.py
Signed-off-by: Stefan Kral <sk@typedivision.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed ffsb copying file and associated runtest file fs_ext4
(both removed in this release).
Added LIBS=-lfts for MUSL.
Removed patches (accepted upstream)
* 0001-mkswap01.sh-Add-udevadm-trigger-before-swap-verifica.patch
* 0001-testcases-fix-an-absent-format-string-issue.patch
* 0001-nm01-Remove-prefix-zeros-of-the-addresses-output-by-.patch
Merged patches
* 0006-rt_tgsigqueueinfo-disable-test-on-musl.patch
(into 0001-build-Add-option-to-select-libc-implementation.patch as they
touch the same files)
Refreshed patches (some tests have been fixed for musl)
* 0001-Add-more-musl-exclusions.patch
* 0001-build-Add-option-to-select-libc-implementation.patch
* 0002-kernel-controllers-Link-with-libfts-explicitly-on-mu.patch
IMHO this one shouldn't be needed not, but CI still fails without it
Updated status
* 0008-testcases-network-nfsv4-acl-acl1.c-Security-fix-on-s.patch
* 0001-syscalls-Check-for-time64-unsafe-syscalls-before-usi.patch
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This can be useful with a more specific, targeted and robust set of ptest
packages; the benefit is that ptest regressions are caught as they happen
and can be more easily traced to changes that caused them.
The existing AB ptest image continues to be expected to fail, my observation
of the AB runs is that the full set of ptests is not robust enough
(particularly around socket/network related tests) and sporadically fails
in random places. This can probably be addressed by making ptests exclusive
to a worker (e.g. there is no other workload happening at the same time as
ptests).
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test is checking that weston is able to start.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I am not sure if this has ever worked, but uvesafb is a really
outdated (VBE from the 1990s), awkward (needs v86d) and limited
(no support for high resolutions) way to do it.
The specific reason 640x480-32 was introduced (ages ago) was
to force 32 bit mode with vmware driver, as 16bit had rendering issues.
The modern, supported option is video=... kernel parameter documented here:
https://wiki.archlinux.org/index.php/kernel_mode_setting#Forcing_modes_and_EDID
https://github.com/torvalds/linux/blob/master/Documentation/fb/modedb.rst
which can be passed directly to runqemu and doesn't require special
kernel modules.
Sato under X will continue to use 640x480 as that is hardcoded into
xorg.conf under qemu.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
since the versions of autotools might differ on target and build host, plus difference in
timestamps for configure and system can result in reconfigure lets avoid
that by disabling maintainer mode
Avoids
error: newly created file is older than distributed files!
[YOCTO #13779]
Suggested-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cpio 2.12 was released in 2015 and might have used older autotools
which could result in errors like
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13779
Bumping to 2.13 will help in matching the tool versions
A good change on top would be to run
aclocal -I .; autoheader; autoconf; automake --add-missing -c
before running configure step perhaps
[YOCTO #13779]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Bruce Ashfield
Alexandre Belloni
Jon Mason
Yanfei Xu
Wes Lindauer
Khem Raj
Alexander Kanavin
Teoh Jay Shen
Matthew
Changqing Li
Andrej Valek
Konrad Weihmann
Anibal Limon
Yeoh Ee Peng
Stefan Kral
Alex Kiernan
Mingli Yu
Petr Vorel