aboutsummaryrefslogtreecommitdiffstats
path: root/meta
AgeCommit message (Collapse)Author
2012-07-17binutils: Backport the e5500/e6500 patches from mainlineKhem Raj
This updates the E5500 and E6500 support patches as they have been applied upstream binutils. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Convert do_headerfix into a definitive patchKhem Raj
do_headerfix task is essentially editing configuration headers in sources which can well be maintained as a patch which is easier to spot errors (if any) than dynamically edited source tree Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17strace: Fix build on eglibc 2.16Khem Raj
This patch fixes two build issues seen with strace one in general with eglibc 2.16 and another with x32 abi Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17libpam: Fix build with eglibc 2.16Khem Raj
pam_unix_acct.c: In function '_unix_run_verify_binary': pam_unix_acct.c:97:19: error: storage size of 'rlim' isn't known pam_unix_acct.c:106:19: error: 'RLIMIT_NOFILE' undeclared (first use in this function) pam_unix_acct.c:106:19: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17valgrind: Fix build with eglibc 2.16Khem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17boost: Upgrade recipe to 1.50.0Khem Raj
1.49.0 is not buildable with eglibc 2.16 since it exposes a define TIME_UTC which is also used in boost until 1.50.0 when it was renamed to TIME_UTC_ so instead of porting needed patches we upgrade boost to latest release Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17grub,guile,cpio,tar,wget: Fix gnulib for absense of gets in eglibcKhem Raj
eglibc 2.16 does not export gets anymore Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17bison: Fix for gets being removed from eglibc 2.16Khem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gettext,m4,augeas,gnutls: Account for removal of gets in eglibc 2.16Khem Raj
These recipes use gnulib which needs this change to use gets when its defined and not otherwise. Until that change goes into gnulib and then all these package upgrade gnulib in their sourcebase we patch them Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17udev: Fix build with eglibc 2.16Khem Raj
Include sys/resource.h to get definition of PRIO_PROCESS Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17diffutils: Fix build with eglibc 2.16Khem Raj
eglibc 2.16 has removed gets so we account for that Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17coreutils: Fix build with eglibc 2.16Khem Raj
eglibc 2.16 has removed gets so we account for that Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17glib: package bash-completion files in separate package and move ↵Martin Jansa
${PN}-codegen to .inc * 2.32.4 has completion files in ${datadir}/bash-completion and dbus also packages bash-competion files in separate package Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17glib: upgrade to 2.32.4Martin Jansa
* it's bugfix release, see http://ftp.gnome.org/pub/gnome/sources/glib/2.32/glib-2.32.4.news for list of fixed bugs Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17libx11: fix makekeys buildMartin Jansa
* on hosts without libx11 installed it fails with | makekeys.c:33:27: fatal error: X11/Xresource.h: No such file or directory since oe-core rev 52d4ff7b35602faa52360a3e7a800891ef60c739 * upstream added -I$(top_srcdir)/include in 24283d40b1e4314c6647dda49d2a159833341a8b to ensure that right Xresource.h version is used, but we're building makekeys outside source tree (x11_disable_makekeys.patch), so we need to pass -I${S}/include in our makekeys build too * building makekeys outside source tree isn't probably needed anymore and recipes should be updated to reflect that, upstream fixes: https://bugs.freedesktop.org/show_bug.cgi?id=22584 http://cgit.freedesktop.org/xorg/lib/libX11/commit/src/util/Makefile.am?id=b2487d07f7b355f230a56e32c763acd08862735c http://cgit.freedesktop.org/xorg/lib/libX11/commit/src/util/Makefile.am?id=24283d40b1e4314c6647dda49d2a159833341a8b Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17busybox: Include sys/resource.h for rusage definitionKhem Raj
Seen with eglibc 2.16 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-17gdb: Replace struct siginfo with proper siginfo_tKhem Raj
Fixes errors like /home/kraj/work/angstrom/sources/openembedded-core/build/tmp-eglibc/work/armv5te-oe-linux-gnueabi/gdb-7.4.1-r0.0/gdb-7.4.1/gdb/linux-nat.h:79:18: error: field 'siginfo' has incomplete type Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-17mirrors: Add debian archive snapshot mirrors to search listKhem Raj
I ran across this problem when apt 0.7.14 was not fetchable from regular debian mirrors and existing snapshot mirror did not have it either since we did not use proper syntax so it was not hitting that. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-17lsof: define linux C library type when using eglibcTing Liu
lsof tries to compile a temp c source file and execute the binary to determine linux C library type (file Configure, line 2689-2717). It is inpracticable for cross-compilation and may have build issue on some distros since it depends on host settings. Fix below error when building for 64bit target on 64bit host: [...] | dsock.c:481:44: error: 'TCP_LISTEN' undeclared (first use in this function) | dsock.c:482:45: error: 'TCP_CLOSING' undeclared (first use in this function) [...] | make: *** [dsock.o] Error 1 The actual issue exists in do_configure: [...] Testing C library type with cc ... done Cannot determine C library type; assuming it is not glibc. Which is in turn caused by missing 'gnu/stubs-32.h" when compiling the temp c source file on host: [...] fatal error: gnu/stubs-32.h: No such file or directory compilation terminated. file gnu/stubs-32.h is provided by 32bit glibc. Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-17base.bbclass: add GNUmakefile to the list of possible makefile namesRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-17crosssdk/nativesdk: Ensure EXTRA_OECONF_FPU is unsetRichard Purdie
If EXTRA_OECONF_FPU is left set, certain ARM variables related to hard-float can get pulled in and trigger rebuilds of the crosssdk code. The best solution is to simply force the variable to a known correct value for the SDK targets currently supported in the same way as TARGET_FPU. There is some slight rearrangement of the gcc code to ensure the variable is always used to call the fpu function. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16python: Fix python-nativesdk variable contamination issueRichard Purdie
Without this, python-nativesdk-crypt can depend on openssl which is incorrect. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16sstate.bbclass: Move crosssdk before cross to ensure correct variables are setRichard Purdie
There was a bug showing up where the crosssdk recipes were being installed as machine specific in the sstate-control directory. This turned out to be due to the architecture fields used by sstate being set incorrectly. The problem is that the crosssdk inherits the cross class. It therefore needs to be listed in this if statement block before the cross check, not after. This should resolve some package architecture issue of crosssdk sstate files. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16gmp: upgrade to 5.0.5Bogdan Marinescu
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16sysvinit-inittab_2.88dsf.bb: Allow multiple serial port consoles to be definedMatthew McClintock
Set SERIAL_CONSOLES if you want to define multiple serial consoles, also if you need to check for the presence of the serial consoles you can also define SERIAL_CONSOLES_CHECK to determine if these are present when you boot. This will prevent error message that pop up when the serial port is not present. SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS1 115200;ttyEHV0" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" The above lines in machine.conf or elsewhere will have the effect of having two serial consoles and removing any that are not present at boot Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16image_types.bbclass: Default XZ_COMPRESSION_LEVEL to -e -6Andrei Gherzan
Having XZ_COMPRESSION_LEVEL on -e -9 and -T 0 will make xz eat more than 6Gb memory. Reduce this to -6 to make xz to use about 471Mb on the tested machine. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16image_types.bbclass: Add XZ variable to set number of threads to be used ↵Andrei Gherzan
while compressing Default this variable to 0. This will make xz use as many threads as there are CPU cores on the system. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16image_types.bbclass: Fix COMPRESS_CMD for xz to redirect compressed data to fileAndrei Gherzan
Having -c modifier makes xz to output the compressed data to stdout. In this way the needed data will be in the do_rootfs log. Redirect data to ${IMAGE_NAME}.rootfs.${type}.xz . Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16cpan.bbclass: Fix CCFLAGS.Xin Ouyang
We should not just replace CCFLAGS with CFLAGS while compiling, because this may cause run-time errors with perl's DynaLoader.pm. Tested on qemux86 with new libnet-libidn-perl bb recipe: root@qemux86:~# perl -e "use Net::LibIDN" Not a CODE reference at /usr/lib/perl/5.14.2//DynaLoader.pm line 213. END failed--call queue aborted at /usr/lib/perl/vendor_perl/5.14.2//Net/LibIDN.pm line 213. Compilation failed in require at -e line 1. BEGIN failed--compilation aborted at -e line 1. Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16puzzles: convert to use SVNSaul Wold
Recently the tarball has been changing due the fact it gets rebuilt nightly and timestamps are getting updated and changed internal to the tarball. Moving back to SVN to try and address this. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16Update proto -> protocol for recipesSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16xz: update to 5.1.2alphaKoen Kooi
This contains bugfixes from the 5.0.3 and 5.0.4 releases Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16task-core-sdk.bb: add libgomp and libgomp-dev by RECOMMENDSZhenhua Luo
Signed-off-by: Zhenhua Luo <b19537@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16python-dbus: upgrade to 1.1.0Bogdan Marinescu
Tested by compiling core-image-basic Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16classes/rootfs_deb: use more reliable check for package existencePaul Eggleton
It turns out "apt-cache showpkg" does return some information when a package does not exist but another package recommends it, which can occur for empty *-dev packages; so use "apt-cache policy" with a different line count instead. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16linux-libc-headers: updated to 3.4.3Bogdan Marinescu
Tested by building core-image-sato-sdk. Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16package.bbclass: Allow overriding of debugedit starting pathPeter Seebach
In the usual case, the computed path used for debugedit to fix up path references for the target filesystem is correct. However, prebuilt binary components, such as prebuilt toolchains, can have debug paths that do not reflect paths within the local build directory. Providing an override lets us continue to use the standard debugedit logic in package.bbclass. Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16slang: change char type to signed char in macrosRoy.Li
Fix [YOCTO 2726] C language has 3 distinct char types: char unsigned char signed char A char has the same range of values as signed char on X86, but same as unsigned char on ARM which made Slang's typecast() and array_sort() unable to work for char value on ARM, since Slang is assuming "char" as "signed char". Now we change "char" as "signed char" explicitly in util/mkslarith2.sl, and use it to regenerate src/slarith2.inc Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16gconf: Disable gtk supportRichard Purdie
There are only a couple of helper utilities within gconf that need gtk+ as a dependency and those are unused and pretty useless. We might as well drop the dependency on gtk and allow more parallel builds by reducing dependency bottlenecks. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16rpm_5.4.9.bb: fix builds on systems with older libcMatthew McClintock
| dbconvert.o: In function `rpmdb_convert': | /local/jenkins/jobs/yocto-upstream/workspace/label/master/machine/p4080ds/poky/master/tmp/work/x86_64-linux/rpm-native-5.4.9-r45/rpm-5.4.9/tools/dbconvert.c:126: warning: the use of `tempnam' is dangerous, better use `mkstemp' | dbconvert.o: In function `main': | dbconvert.c:(.text+0x923): undefined reference to `htobe32' | dbconvert.c:(.text+0xaa4): undefined reference to `htole32' | dbconvert.c:(.text+0xac9): undefined reference to `htole32' Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16mkelfimage: Upstream fixed packaging issue so upgrade to e1e6a91Raymond Danks
Address QA issue: Files/directories were installed but not shipped. New revision contains patch to mkelfimage removing /usr/share/mkelfImage/elf32-i386 directory from Makefile install target. http://review.coreboot.org/#/c/1195/ Signed-off-by: Raymond Danks <ray.danks@se-eng.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16package install failure on systems without /sbin/ldconfigAmy Fong
Package install failures due to issues in post install rules. package_do_shlibs only looks for libraries in a directory "lib", this should be modified to the variable baselib. ldconfig_postinst_fragment failure observed on systems without /sbin/ldconfig [ -x /sbin/ldconfig ] && /sbin/ldconfig results in the post install rule returning a failure. Modify to if [ -x /sbin/ldconfig ]; then /sbin/ldconfig; fi Signed-off-by: Amy Fong <amy.fong@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16conf/machine: replace TUNE_CONFLICTS with TUNECONFLICTSMartin Jansa
* it wasn't consistent with other machine configs * reported 2 months ago.. http://lists.linuxtogo.org/pipermail/openembedded-core/2012-May/022154.html Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-12perf: add perl, python to DEPENDSTom Zanussi
perf has perl and python compile-time dependendencies, add them. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11linux-yocto/3.0: perf scripting supportBruce Ashfield
Updating the 3.0 SRCREVs to pickup the recent perf scripting fixes. cef17a1 perf: add sgidefs.h to for mips builds 3258da3 perf: change --root to --prefix for python install 1f9c25b perf: add 'libperl not found' warning f2b1bf1 perf: use pkg-config instead of python-config 568e05f perf tools: Add support to install perf python extension 7e47f81 Revert "perf: hard-code NO_LIBPERL/NO_LIBPYTHON" Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11connman-gnome: remove unused patches, they were all merged upstreamRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11libgomp: add libgomp (openmp) library, and build for powerpc targets by defaultMatthew McClintock
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc: gcc-cross-canadian: use correct location for libraries for powerpc64Matthew McClintock
This fixes the issue where gcc invokes the linker with an incorrect -L library location and gives up because it can't find libraries. It was looking in a /lib folder instead of /lib64 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc-configure-common.inc: use --with-long-double-128 on powerpc to comply ↵Matthew McClintock
with ABI Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11openjade-native_1.3.2.bb: fix typo and change the deps exclusion to correct varMatthew McClintock
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-18 09:06:29 +0000