| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
OE wic plugins create temporary file with the index of the line
tmp file name. This causes race in case several builds run in time.
If source_params['file'] is an absolute path, the cr_workdir prefix
is not applied by os.path.join(). So instead it writes to a ".1"
file next to the original image - this is outside the WORKDIR
and at risk of collision.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Suggested-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When opening files by file-browsers on fresh images, user has to choose the
application to open from the pool af ALL known applications even those not
designed to open the file selected. By inheriting this classs in recipes the
assosiations in /usr/share/applications/mimeinfo.cache are build by calling
update-desktop-database.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* add a short descriptions of class' use case
* remove checks for update-mime-database - it can be considered available:
* at build time by PACKAGE_WRITE_DEPS
* at package upgrade by RDEPENDS chain
pkg -> shared-mime-info-data -> shared-mime-info
* simplify (accelerate?) xml file extension detection
* run update-mime-database once only at image creation to avoid expensive
redundant operations
* allow shared-mime-info to inherit mime.bbclass by avoiding circular
dependencies
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a comparision branch is set we see warnings. If two branches are used,
look for buildstats information from both to avoid this kind of warning:
INFO: Parsing buildstats from 'refs/notes/buildstats/perf-centos7.yoctoproject.org/master-next/qemux86'
WARNING: Buildstats not found for perf-centos7.yoctoproject.org/master/qemux86/56808-g08220028e52992dcba667fc97bf3afe8be1949fb/0
WARNING: Buildstats not found for perf-centos7.yoctoproject.org/master/qemux86/56808-g08220028e52992dcba667fc97bf3afe8be1949fb/1
INFO: Buildstats were missing for some test runs, please run 'git fetch origin refs/notes/buildstats/perf-centos7.yoctoproject.org/master-next/qemux86:refs/notes/buildstats/perf-centos7.yoctoproject.org/master-next/qemux86' and try again
(the warning is due to stats being looked for in both branches, choose
the other branch and different warnings would be shown)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Qemu supports attaching the virtual machine to an existing network
bridge interface via the qemu-bridge-helper program (as long as the
system is correctly configured to give the user permissions). Add
support for runqemu to do this also via the "bridge=<INTERFACE>"
argument. Note that for this to work correctly, the host
qemu-bridge-helper must be used, not the one that might have been built
by qemu-native. In order for qemu to correctly find this program, a
qemu-oe-bridge-helper program has been added to qemu-helper-native, and
runqemu will use this helper as the bridge helper. The helper will look
for the host qemu-bridge-helper first by looking in the
QEMU_BRIDGE_HELPER environment variable, then by search common paths
where the helper is installed.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This option adds the contents of the given path to a partition built
with the rootfs source plugin. The path is relative to the directory in
which wic is running not the rootfs itself so use of an absolute path
is recommended. This option is most useful when multiple copies of the
rootfs are added to an image and it is required to add extra content to
only one of these copies. This option only has an effect with the
rootfs source plugin.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When debugging issues or trying to add new features in wic it's useful
to examine the intermediate files created by the tool such as images of
the individual partitions. Previously these files were created in a
subdirectory of IMGDEPLOYDIR and, deleted by wic itself and then the
working subdirectory completely removed at the end of IMAGE_CMD_wic.
Instead we should work in a staging directory named build-wic and leave
behind intermediate files for analysis if necessary.
This has the added benefit of allowing individual partition images to
be preserved by adding commands to IMAGE_CMD_wic_append() in an image
recipe if needed. This is useful where an update system requires exact
sized and pre-formatted partition images for deployment.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a recipe is selected, automatically select the package that
matches the recipe name (if it exists), otherwise select the first
package.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Just like the package sizes already are shown.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not all widgets were hidden when no package was selected.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Implement new QB_DRIVE_TYPE="/dev/vdb" which falls back
to virtio block device emulated by qemu.
That is needed to support following qemu command line:
-drive id=disk0,file=%s,if=none,format=%s \
-device virtio-blk-device,drive=disk0'
Real use case is arm64 emulation with qemu with atf+optee+uboot,
so that uboot driver sees this disk and able to load from it.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can have sstate directories which are mixtures of old and new layout entries.
Only use the new format ones since these are the only ones bitbake itself will
look at.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're having speed issues on the autobuilder due to the numbers of files in sstate
directories. We previously split these by the first two characters of the hash.
This change extends this to split by the next two characters as well, creating
more layers of directories.
This should signifiantly speed up eSDK builds on the autobuilder as the current
sstate layout simply isn't scaling there but addresses a general complaint.
gen-lockedsig-cache needed to be updated for the new split level sstate.
Also update tests for new layout.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some file systems don't support fetching the block size (notably the
file system Docker uses for containers), so if iotctl() fail, try to use
failback via os.stat() to get block size.
Signed-off-by: Kalle lampila <kalle.lampila@lempea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Users may want to run qemu against a specific multiconfig instead of the
base configuration, so give them the ability to specify which config
should be used with the MULTICONFIG environment variable.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
pkgdataui is a Python 3/GObject Introspection/GTK+ 3 tool to browse the pkgdata
database at your leisure. By being graphical it is easier to explore and can
follow links between packages.
This is very much a work in progress, so be gentle and patches are welcome.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
On test machines we have python3 available at alternative locations. Use
these rather from the evnrionment rather than a hardcoded path.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we fail to run the command to generate the tap devices then we should
show a reasonable message and then exit, without showing a traceback.
"return 1" at this point in the code does nothing because the caller
doesn't check the return, so just use sys.exit().
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is not a good idea to mix logging and calls to print() - if the
output is being captured the result can be that the two types of output
are not recorded contiguously; this could be observed if an error
occurred running runqemu from inside testimage:
---------- snip ----------
ERROR: core-image-minimal-1.0-r0 do_testimage: Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
runqemu - INFO - Setting up tap interface under sudo
sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
runqemu - ERROR - Setting up tap device failed:
Command '('sudo', '/home/paul/poky/poky/scripts/runqemu-ifup', '1000', '1000', '/home/paul/poky/poky/build/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin')' returned non-zero exit status 1.
Run runqemu-gen-tapdevs to manually create one.
runqemu - INFO - Cleaning up
KERNEL: [/home/paul/poky/poky/build/tmp/deploy/images/qemux86-64/bzImage--5.2.20+git0+bd0762cd13_dd25a04fc5-r0-qemux86-64-20191205213021.bin]
MACHINE: [qemux86-64]
FSTYPE: [ext4]
ROOTFS: [/home/paul/poky/poky/build/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.ext4]
CONFFILE: [/home/paul/poky/poky/build/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.qemuboot.conf]
---------- snip ----------
What we should see here is the KERNEL, MACHINE, etc. lines appearing
immediately after the "Continuing with the following parameters:" line
as they do when you run runqemu directly. If we put all of the lines
through the logger instead then it works properly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
imp was replaced by importlib as it's deprecated, but the import
line was left, so remove this useless line.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
currently 'wic cp' only works for copy file from local storage to
wic image.
enhance 'wic cp' to copy file/directory from wic image to local storage.
include selftest and 'wic help' updates.
[YOCTO#12169]
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the reproducible_build class is inherited then there may be a
"source-date-epoch" subdirectory in a fetched source tree; devtool
upgrade was not expecting that in the upgraded source. Take a small
snippet of code from recipetool create which already handles this,
and make it a shared function that can be used in both places.
Additionally, fix an assumption that the source is always in a
subdirectory in the cleanup code that blocked debugging this.
[YOCTO #13635]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 41d225f4a37d02e9f79bdbfb79caac8cd3d291ce.
Unfortunately this change broke 'devtool upgrade' functionality,
causing 'devtool finish' to write out an upgraded recipe that no
longer includes the original upstream source in SRC_URI.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The extra diretory created by reproducibile_builds was confusing recipetool
and hence devtool. Ignore this directory to restore the correct behaviour and
allow it to work with the class.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic currently unable to remove non-empty directory in ext* partition.
enable wic rm to remove non-empty directory and all the sub-content
with -r flag.
update help documents for 'wic rm'.
[YOCTO #12404]
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some installation rules have been seen to run chgrp for native recipes
which leads to 'Operation not permitted' errors. To prevent this we
need a chgrp intercept script to go with the existing chown intercept.
Signed-off-by: Paul Barker <paul@betafive.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable the option to add extra test environment data to the
configuration of each test result (as optional).
Example of optional test environment data include:
- custom packages included for runtime test
- detail machine specification used as target
- detail host environment used for bitbake
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add total passed, failed, and skipped statistic to test result.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In case of debugging, report user need to acccess the raw
test result. Instead of going back to source file/directory/URL
to manually pull out the raw result, provide alternative
way to let report showing raw test results by providing
the result id (optional).
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, report will use the store_map to generate the key
to reference each result set. In some situation when using store_map
with multiple set of tests sharing similar test configurations,
the report will only showing partial result set for results
that having identical result_id (use of multiconfig to run tests
where it generate identical result_id).
Enable report to have the option to use the regression_map (optional)
instead of the default store_map, where it will take larger
set of configurations to generate the key to reference each
result set, this will prevent the report from only showing
partial result set.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Wic help returned to the user is unreadable.
Use a custom ArgumentParser to override argparse help message.
change help message as suggest in
https://bugzilla.yoctoproject.org/show_bug.cgi?id=12205
[YOCTO #12205]
changes applies to 'wic help', 'wic -h', 'wic --h' and 'wic --help'
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add "esp_extra_blocks" plugin parameter so that caller may change
ESP's free space from the default 100 blocks.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add "esp_label" plugin parameter so that caller may override default
ESP partition label 'EFIimg'.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The list-pkgs currently print packages in unordered format.
Enable list-pkgs to print ordered packages that will ease
viewing.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
[YOCTO #13312]
see https://bugzilla.yoctoproject.org/show_bug.cgi?id=13312
wic/engine.Disk._get_part_image was looking at variable fstypes for
supported fstype which is 'swap' but image build with 'linux-swap'.
supported fstype should be 'linux-swap'.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
update the help desciption for 'wic write' command to
match behaviour.
see commit:
https://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/scripts/wic?id=74b44e59be89c738f702948f9e16e367c0ba43ba
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Enable --remove-work option for devtool reset command that allows user
to clean up source directory within workspace.
Currently devtool reset command only removes recipes and user is forced
to manually remove the sources directory within the workspace before
running devtool modify again.
Using devtool reset -r or devtool reset --remove-work option, user can
cleanup the sources directory along with the recipe instead of manually
cleaning it.
syntax: devtool reset -r <recipename>
Ex: devtool reset -r zip
devtool finish -r <recipename> <layer-name>
Ex: devtool finish -r zip meta-yocto-bsp
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the source file is located in a subdirectory of DEPLOY_DIR
rawcopy will currently fail in sparse_copy function on
open(dst_fname, 'wb'), as the parent directory for destination
file does not exist.
This patch helps to avoid that by recursively creating
parent directories.
Signed-off-by: Eugene Smirnov <evgenii.smirnov@here.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The option 'highres=off' sneaked itself into the runqemu script for all
configurations, where the root filesystem type is not 'cpio' or 'cpio.gz'.
See: https://bugzilla.yoctoproject.org/show_bug.cgi?id=13590
Signed-off-by: Joerg Vehlow <joerg.vehlow@aox-tech.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some host distributions (opensuse for example) are using 'pkgconf',
which, unlike the original pkg-config, appends PKG_CONFIG_SYSROOT_DIR
to every directory from the .pc file.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Ross Burton
Maxim Uvarov
Andreas Müller
Richard Purdie
Joshua Watt
Paul Barker
Peter Kjellerstedt
Kalle Lampila
Alexander Kanavin
Paul Eggleton
Chen Qi
Chee Yang Lee
Paul Barker
Yeoh Ee Peng
Haris Okanovic
Eduardo Abinader
Sai Hari Chandana Kalluri
Eugene Smirnov
Joerg Vehlow