linux-davinci : Update defconfig. Add patch to support NAND flash.

2 files changed, 931 insertions, 59 deletions

diff --git a/packages/linux/linux-davinci/davinci-nand.patch b/packages/linux/linux-davinci/davinci-nand.patch
new file mode 100644
index 0000000000..33e53cf095
--- /dev/null
+++ b/packages/linux/linux-davinci/davinci-nand.patch
@@ -0,0 +1,905 @@
+Index: linux-davinci/drivers/mtd/nand/davinci_nand.c
+===================================================================
+--- /dev/null
++++ linux-davinci/drivers/mtd/nand/davinci_nand.c
+@@ -0,0 +1,638 @@
++/*
++ * linux/drivers/mtd/nand/davinci_nand.c
++ *
++ * NAND Flash Driver
++ *
++ * Copyright (C) 2006 Texas Instruments.
++ *
++ * ported to 2.6.23 (C) 2008 by
++ * Sander Huijsen <Shuijsen@optelecom-nkf.com>
++ * Troy Kisky <troy.kisky@boundarydevices.com>
++ * Dirk Behme <Dirk.Behme@gmail.com>
++ *
++ * --------------------------------------------------------------------------
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ * --------------------------------------------------------------------------
++ *
++ *  Overview:
++ *   This is a device driver for the NAND flash device found on the
++ *   DaVinci board which utilizes the Samsung k9k2g08 part.
++ *
++ *  Modifications:
++ *  ver. 1.0: Feb 2005, Vinod/Sudhakar
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/io.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/nand.h>
++#include <asm/arch/mux.h>
++
++#include <asm/mach/flash.h>
++
++#ifdef CONFIG_NAND_FLASH_HW_ECC
++#define DAVINCI_NAND_ECC_MODE NAND_ECC_HW3_512
++#else
++#define DAVINCI_NAND_ECC_MODE NAND_ECC_SOFT
++#endif
++
++#define DRIVER_NAME "davinci_nand"
++
++static struct clk *nand_clock;
++static void __iomem *nand_vaddr;
++
++/*
++ * MTD structure for DaVinici board
++ */
++static struct mtd_info *nand_davinci_mtd;
++
++#ifdef CONFIG_MTD_PARTITIONS
++const char *part_probes[] = { "cmdlinepart", NULL };
++#endif
++
++static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
++
++/* BB marker is byte 5 in OOB of page 0 */
++static struct nand_bbt_descr davinci_memorybased_small = {
++	.options = NAND_BBT_SCAN2NDPAGE,
++	.offs = 5,
++	.len = 1,
++	.pattern = scan_ff_pattern
++};
++
++/* BB marker is bytes 0-1 in OOB of page 0 */
++static struct nand_bbt_descr davinci_memorybased_large = {
++	.options = 0,
++	.offs = 0,
++	.len = 2,
++	.pattern = scan_ff_pattern
++};
++
++inline unsigned int davinci_nand_readl(int offset)
++{
++	return davinci_readl(DAVINCI_ASYNC_EMIF_CNTRL_BASE + offset);
++}
++
++inline void davinci_nand_writel(unsigned long value, int offset)
++{
++	davinci_writel(value, DAVINCI_ASYNC_EMIF_CNTRL_BASE + offset);
++}
++
++/*
++ * Hardware specific access to control-lines
++ */
++static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd,
++				   unsigned int ctrl)
++{
++	struct nand_chip *chip = mtd->priv;
++	u32 IO_ADDR_W = (u32)chip->IO_ADDR_W;
++
++	/* Did the control lines change? */
++	if (ctrl & NAND_CTRL_CHANGE) {
++		IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
++
++		if ((ctrl & NAND_CTRL_CLE) == NAND_CTRL_CLE)
++			IO_ADDR_W |= MASK_CLE;
++		else if ((ctrl & NAND_CTRL_ALE) == NAND_CTRL_ALE)
++			IO_ADDR_W |= MASK_ALE;
++
++		chip->IO_ADDR_W = (void __iomem *)IO_ADDR_W;
++	}
++
++	if (cmd != NAND_CMD_NONE)
++		writeb(cmd, chip->IO_ADDR_W);
++}
++
++static void nand_davinci_select_chip(struct mtd_info *mtd, int chip)
++{
++	/* do nothing */
++}
++
++#ifdef CONFIG_NAND_FLASH_HW_ECC
++static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
++{
++	u32 retval;
++
++	/* Reset ECC hardware */
++	retval = davinci_nand_readl(NANDF1ECC_OFFSET);
++
++	/* Restart ECC hardware */
++	retval = davinci_nand_readl(NANDFCR_OFFSET);
++	retval |= (1 << 8);
++	davinci_nand_writel(retval, NANDFCR_OFFSET);
++}
++
++/*
++ * Read DaVinci ECC register
++ */
++static u32 nand_davinci_readecc(struct mtd_info *mtd)
++{
++	/* Read register ECC and clear it */
++	return davinci_nand_readl(NANDF1ECC_OFFSET);
++}
++
++/*
++ * Read DaVinci ECC registers and rework into MTD format
++ */
++static int nand_davinci_calculate_ecc(struct mtd_info *mtd,
++				      const u_char *dat, u_char *ecc_code)
++{
++	unsigned int ecc_val = nand_davinci_readecc(mtd);
++	/* squeeze 0 middle bits out so that it fits in 3 bytes */
++	unsigned int tmp = (ecc_val&0x0fff)|((ecc_val&0x0fff0000)>>4);
++	/* invert so that erased block ecc is correct */
++	tmp = ~tmp;
++	ecc_code[0] = (u_char)(tmp);
++	ecc_code[1] = (u_char)(tmp >> 8);
++	ecc_code[2] = (u_char)(tmp >> 16);
++
++	return 0;
++}
++
++static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat,
++				     u_char *read_ecc, u_char *calc_ecc)
++{
++	struct nand_chip *chip = mtd->priv;
++	u_int32_t eccNand = read_ecc[0] | (read_ecc[1] << 8) |
++					  (read_ecc[2] << 16);
++	u_int32_t eccCalc = calc_ecc[0] | (calc_ecc[1] << 8) |
++					  (calc_ecc[2] << 16);
++	u_int32_t diff = eccCalc ^ eccNand;
++
++	if (diff) {
++		if ((((diff>>12)^diff) & 0xfff) == 0xfff) {
++			/* Correctable error */
++			if ((diff>>(12+3)) < chip->ecc.size) {
++				dat[diff>>(12+3)] ^= (1 << ((diff>>12)&7));
++				return 1;
++			} else {
++				return -1;
++			}
++		} else if (!(diff & (diff-1))) {
++			/* Single bit ECC error in the ECC itself,
++			   nothing to fix */
++			return 1;
++		} else {
++			/* Uncorrectable error */
++			return -1;
++		}
++
++	}
++	return 0;
++}
++#endif
++
++/*
++ * Read OOB data from flash.
++ */
++static int read_oob_and_check(struct mtd_info *mtd, loff_t offs, uint8_t *buf,
++			      struct nand_bbt_descr *bd)
++{
++	int i, ret;
++	int page;
++	struct nand_chip *chip = mtd->priv;
++
++	/* Calculate page address from offset */
++	page = (int)(offs >> chip->page_shift);
++	page &= chip->pagemask;
++
++	/* Read OOB data from flash */
++	ret = chip->ecc.read_oob(mtd, chip, page, 1);
++	if (ret < 0)
++		return ret;
++
++	/* Copy read OOB data to the buffer*/
++	memcpy(buf, chip->oob_poi, mtd->oobsize);
++
++	/* Check pattern against BBM in OOB area */
++	for (i = 0; i < bd->len; i++) {
++		if (buf[bd->offs + i] != bd->pattern[i])
++			return 1;
++	}
++	return 0;
++}
++
++/*
++ * Fill in the memory based Bad Block Table (BBT).
++ */
++static int nand_davinci_memory_bbt(struct mtd_info *mtd,
++				   struct nand_bbt_descr *bd)
++{
++	int i, numblocks;
++	int startblock = 0;
++	loff_t from = 0;
++	struct nand_chip *chip = mtd->priv;
++	int blocksize = 1 << chip->bbt_erase_shift;
++	uint8_t *buf = chip->buffers->databuf;
++	int len = bd->options & NAND_BBT_SCAN2NDPAGE ? 2 : 1;
++
++	/* -numblocks- is 2 times the actual number of eraseblocks */
++	numblocks = mtd->size >> (chip->bbt_erase_shift - 1);
++
++	/* Now loop through all eraseblocks in the flash */
++	for (i = startblock; i < numblocks; i += 2) {
++		int j, ret;
++		int offs = from;
++
++		/* If NAND_BBT_SCAN2NDPAGE flag is set in bd->options,
++		 * also each 2nd page of an eraseblock is checked
++		 * for a Bad Block Marker. In that case, len equals 2.
++		 */
++		for (j = 0; j < len; j++) {
++			/* Read OOB data and check pattern */
++			ret = read_oob_and_check(mtd, from, buf, bd);
++			if (ret < 0)
++				return ret;
++
++			/* Check pattern for bad block markers */
++			if (ret) {
++				/* Mark bad block by writing 0b11 in the
++				   table */
++				chip->bbt[i >> 3] |= 0x03 << (i & 0x6);
++
++				printk(KERN_WARNING "Bad eraseblock %d at " \
++						    "0x%08x\n", i >> 1,
++						     (unsigned int)from);
++
++				mtd->ecc_stats.badblocks++;
++				break;
++			}
++			offs += mtd->writesize;
++		}
++
++		/* Make -from- point to next eraseblock */
++		from += blocksize;
++	}
++
++	printk(KERN_NOTICE "Bad block scan: %d out of %d blocks are bad.\n",
++			    mtd->ecc_stats.badblocks, numblocks>>1);
++
++	return 0;
++}
++
++/*
++ * This function creates a memory based bad block table (BBT).
++ * It is largely based on the standard BBT function, but all
++ * unnecessary junk is thrown out to speed up.
++ */
++static int nand_davinci_scan_bbt(struct mtd_info *mtd)
++{
++	struct nand_chip *chip = mtd->priv;
++	struct nand_bbt_descr *bd;
++	int len, ret = 0;
++
++	chip->bbt_td = NULL;
++	chip->bbt_md = NULL;
++
++	/* pagesize determines location of BBM */
++	if (mtd->writesize > 512)
++		bd = &davinci_memorybased_large;
++	else
++		bd = &davinci_memorybased_small;
++
++	chip->badblock_pattern = bd;
++
++	/* Use 2 bits per page meaning 4 page markers per byte */
++	len = mtd->size >> (chip->bbt_erase_shift + 2);
++
++	/* Allocate memory (2bit per block) and clear the memory bad block
++	   table */
++	chip->bbt = kzalloc(len, GFP_KERNEL);
++	if (!chip->bbt) {
++		printk(KERN_ERR "nand_davinci_scan_bbt: Out of memory\n");
++		return -ENOMEM;
++	}
++
++	/* Now try to fill in the BBT */
++	ret = nand_davinci_memory_bbt(mtd, bd);
++	if (ret) {
++		printk(KERN_ERR "nand_davinci_scan_bbt: "
++		       "Can't scan flash and build the RAM-based BBT\n");
++
++		kfree(chip->bbt);
++		chip->bbt = NULL;
++	}
++
++	return ret;
++}
++
++/*
++ * Read from memory register: we can read 4 bytes at a time.
++ * The hardware takes care of actually reading the NAND flash.
++ */
++static void nand_davinci_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
++{
++	int i;
++	int num_words = len >> 2;
++	u32 *p = (u32 *)buf;
++	struct nand_chip *chip = mtd->priv;
++
++	for (i = 0; i < num_words; i++)
++		p[i] = readl(chip->IO_ADDR_R);
++}
++
++/*
++ * Check hardware register for wait status. Returns 1 if device is ready,
++ * 0 if it is still busy.
++ */
++static int nand_davinci_dev_ready(struct mtd_info *mtd)
++{
++	return (davinci_nand_readl(NANDFSR_OFFSET) & NAND_BUSY_FLAG);
++}
++
++static void nand_davinci_set_eccsize(struct nand_chip *chip)
++{
++	chip->ecc.size = 256;
++
++#ifdef CONFIG_NAND_FLASH_HW_ECC
++	switch (chip->ecc.mode) {
++	case NAND_ECC_HW12_2048:
++		chip->ecc.size = 2048;
++		break;
++
++	case NAND_ECC_HW3_512:
++	case NAND_ECC_HW6_512:
++	case NAND_ECC_HW8_512:
++	chip->ecc.size = 512;
++		break;
++
++	case NAND_ECC_HW3_256:
++	default:
++		/* do nothing */
++		break;
++	}
++#endif
++}
++
++static void nand_davinci_set_eccbytes(struct nand_chip *chip)
++{
++	chip->ecc.bytes = 3;
++
++#ifdef CONFIG_NAND_FLASH_HW_ECC
++	switch (chip->ecc.mode) {
++	case NAND_ECC_HW12_2048:
++		chip->ecc.bytes += 4;
++	case NAND_ECC_HW8_512:
++		chip->ecc.bytes += 2;
++	case NAND_ECC_HW6_512:
++		chip->ecc.bytes += 3;
++	case NAND_ECC_HW3_512:
++	case NAND_ECC_HW3_256:
++	default:
++		/* do nothing */
++		break;
++	}
++#endif
++}
++
++static void __devinit nand_davinci_flash_init(void)
++{
++	u32 regval, tmp;
++
++	/* Check for correct pin mux, reconfigure if necessary */
++	tmp = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + PINMUX0);
++
++	if ((tmp & 0x20020C1F) != 0x00000C1F) {
++		/* Disable HPI and ATA mux */
++		davinci_mux_peripheral(DAVINCI_MUX_HPIEN, 0);
++		davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 0);
++
++		/* Enable VLYNQ and AEAW */
++		davinci_mux_peripheral(DAVINCI_MUX_AEAW0, 1);
++		davinci_mux_peripheral(DAVINCI_MUX_AEAW1, 1);
++		davinci_mux_peripheral(DAVINCI_MUX_AEAW2, 1);
++		davinci_mux_peripheral(DAVINCI_MUX_AEAW3, 1);
++		davinci_mux_peripheral(DAVINCI_MUX_AEAW4, 1);
++		davinci_mux_peripheral(DAVINCI_MUX_VLSCREN, 1);
++		davinci_mux_peripheral(DAVINCI_MUX_VLYNQEN, 1);
++
++		regval = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + PINMUX0);
++
++		printk(KERN_WARNING "Warning: MUX config for NAND: Set " \
++		       "PINMUX0 reg to 0x%08x, was 0x%08x, should be done " \
++		       "by bootloader.\n", regval, tmp);
++	}
++
++	regval = davinci_nand_readl(AWCCR_OFFSET);
++	regval |= 0x10000000;
++	davinci_nand_writel(regval, AWCCR_OFFSET);
++
++	/*------------------------------------------------------------------*
++	 *  NAND FLASH CHIP TIMEOUT @ 459 MHz                               *
++	 *                                                                  *
++	 *  AEMIF.CLK freq   = PLL1/6 = 459/6 = 76.5 MHz                    *
++	 *  AEMIF.CLK period = 1/76.5 MHz = 13.1 ns                         *
++	 *                                                                  *
++	 *------------------------------------------------------------------*/
++	regval = 0
++		| (0 << 31)           /* selectStrobe */
++		| (0 << 30)           /* extWait */
++		| (1 << 26)           /* writeSetup      10 ns */
++		| (3 << 20)           /* writeStrobe     40 ns */
++		| (1 << 17)           /* writeHold       10 ns */
++		| (0 << 13)           /* readSetup       10 ns */
++		| (3 << 7)            /* readStrobe      60 ns */
++		| (0 << 4)            /* readHold        10 ns */
++		| (3 << 2)            /* turnAround      ?? ns */
++		| (0 << 0)            /* asyncSize       8-bit bus */
++		;
++	tmp = davinci_nand_readl(A1CR_OFFSET);
++	if (tmp != regval) {
++		printk(KERN_WARNING "Warning: NAND config: Set A1CR " \
++		       "reg to 0x%08x, was 0x%08x, should be done by " \
++		       "bootloader.\n", regval, tmp);
++		davinci_nand_writel(regval, A1CR_OFFSET); /* 0x0434018C */
++	}
++
++	davinci_nand_writel(0x00000101, NANDFCR_OFFSET);
++}
++
++/*
++ * Main initialization routine
++ */
++int __devinit nand_davinci_probe(struct platform_device *pdev)
++{
++	struct nand_platform_data *pdata = pdev->dev.platform_data;
++	struct resource		  *res = pdev->resource;
++	struct nand_chip     	  *chip;
++	struct device        	  *dev = NULL;
++	u32                  	  nand_rev_code;
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++	char                 	  *master_name;
++	int 		     	  mtd_parts_nb = 0;
++	struct mtd_partition 	  *mtd_parts = 0;
++#endif
++
++	nand_clock = clk_get(dev, "AEMIFCLK");
++	if (IS_ERR(nand_clock)) {
++		printk(KERN_ERR "Error %ld getting AEMIFCLK clock?\n",
++		       PTR_ERR(nand_clock));
++		return -1;
++	}
++
++	clk_enable(nand_clock);
++
++	/* Allocate memory for MTD device structure and private data */
++	nand_davinci_mtd = kmalloc(sizeof(struct mtd_info) +
++				   sizeof(struct nand_chip), GFP_KERNEL);
++
++	if (!nand_davinci_mtd) {
++		printk(KERN_ERR "Unable to allocate davinci NAND MTD device " \
++		       "structure.\n");
++		clk_disable(nand_clock);
++		return -ENOMEM;
++	}
++
++	/* Get pointer to private data */
++	chip = (struct nand_chip *) (&nand_davinci_mtd[1]);
++
++	/* Initialize structures */
++	memset((char *)nand_davinci_mtd, 0, sizeof(struct mtd_info));
++	memset((char *)chip, 0, sizeof(struct nand_chip));
++
++	/* Link the private data with the MTD structure */
++	nand_davinci_mtd->priv = chip;
++
++	nand_rev_code = davinci_nand_readl(NRCSR_OFFSET);
++
++	printk("DaVinci NAND Controller rev. %d.%d\n",
++	       (nand_rev_code >> 8) & 0xff, nand_rev_code & 0xff);
++
++	nand_vaddr = ioremap(res->start, res->end - res->start);
++	if (nand_vaddr == NULL) {
++		printk(KERN_ERR "DaVinci NAND: ioremap failed.\n");
++		clk_disable(nand_clock);
++		kfree(nand_davinci_mtd);
++		return -ENOMEM;
++	}
++
++	chip->IO_ADDR_R   = (void __iomem *)nand_vaddr;
++	chip->IO_ADDR_W   = (void __iomem *)nand_vaddr;
++	chip->chip_delay  = 0;
++	chip->select_chip = nand_davinci_select_chip;
++	chip->options     = 0;
++	chip->ecc.mode	  = DAVINCI_NAND_ECC_MODE;
++
++	/* Set ECC size and bytes */
++	nand_davinci_set_eccsize(chip);
++	nand_davinci_set_eccbytes(chip);
++
++	/* Set address of hardware control function */
++	chip->cmd_ctrl  = nand_davinci_hwcontrol;
++	chip->dev_ready = nand_davinci_dev_ready;
++
++#ifdef CONFIG_NAND_FLASH_HW_ECC
++	chip->ecc.calculate = nand_davinci_calculate_ecc;
++	chip->ecc.correct   = nand_davinci_correct_data;
++	chip->ecc.hwctl     = nand_davinci_enable_hwecc;
++#endif
++
++	/* Speed up the read buffer */
++	chip->read_buf      = nand_davinci_read_buf;
++
++	/* Speed up the creation of the bad block table */
++	chip->scan_bbt      = nand_davinci_scan_bbt;
++
++	nand_davinci_flash_init();
++
++	nand_davinci_mtd->owner = THIS_MODULE;
++
++	/* Scan to find existence of the device */
++	if (nand_scan(nand_davinci_mtd, 1)) {
++		printk(KERN_ERR "Chip Select is not set for NAND\n");
++		clk_disable(nand_clock);
++		kfree(nand_davinci_mtd);
++		return -ENXIO;
++	}
++
++	/* Register the partitions */
++	add_mtd_partitions(nand_davinci_mtd, pdata->parts, pdata->nr_parts);
++
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++	/* Set nand_davinci_mtd->name = 0 temporarily */
++	master_name = nand_davinci_mtd->name;
++	nand_davinci_mtd->name = (char *)0;
++
++	/* nand_davinci_mtd->name == 0, means: don't bother checking
++	   <mtd-id> */
++	mtd_parts_nb = parse_mtd_partitions(nand_davinci_mtd, part_probes,
++					    &mtd_parts, 0);
++
++	/* Restore nand_davinci_mtd->name */
++	nand_davinci_mtd->name = master_name;
++
++	add_mtd_partitions(nand_davinci_mtd, mtd_parts, mtd_parts_nb);
++#endif
++
++	return 0;
++}
++
++/*
++ * Clean up routine
++ */
++static int nand_davinci_remove(struct platform_device *pdev)
++{
++	clk_disable(nand_clock);
++
++	if (nand_vaddr)
++		iounmap(nand_vaddr);
++
++	/* Release resources, unregister device */
++	nand_release(nand_davinci_mtd);
++
++	/* Free the MTD device structure */
++	kfree(nand_davinci_mtd);
++
++	return 0;
++}
++
++
++static struct platform_driver nand_davinci_driver = {
++	.probe		= nand_davinci_probe,
++	.remove		= nand_davinci_remove,
++	.driver		= {
++		.name	= DRIVER_NAME,
++	},
++};
++
++static int __init nand_davinci_init(void)
++{
++	return platform_driver_register(&nand_davinci_driver);
++}
++module_init(nand_davinci_init);
++
++#ifdef MODULE
++static void __exit nand_davinci_exit(void)
++{
++	platform_driver_unregister(&nand_davinci_driver);
++}
++module_exit(nand_davinci_exit);
++#endif
++
++MODULE_ALIAS(DRIVER_NAME);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Texas Instruments");
++MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on davinci" \
++		   "board");
+Index: linux-davinci/drivers/mtd/nand/Makefile
+===================================================================
+--- linux-davinci.orig/drivers/mtd/nand/Makefile
++++ linux-davinci/drivers/mtd/nand/Makefile
+@@ -29,5 +29,6 @@ obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nan
+ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
+ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
++obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
+ 
+ nand-objs := nand_base.o nand_bbt.o
+Index: linux-davinci/drivers/mtd/nand/Kconfig
+===================================================================
+--- linux-davinci.orig/drivers/mtd/nand/Kconfig
++++ linux-davinci/drivers/mtd/nand/Kconfig
+@@ -293,5 +293,17 @@ config MTD_NAND_PLATFORM
+ 	  devices. You will need to provide platform-specific functions
+ 	  via platform_data.
+ 
++config MTD_NAND_DAVINCI
++        tristate "NAND Flash device on DaVinci SoC"
++        depends on MTD_NAND
++	select MTD_PARTITIONS
++        help
++          Support for NAND flash on Texas Instruments DaVinci SoC.
++
++config NAND_FLASH_HW_ECC
++        bool "Hardware ECC Support on NAND Device for DaVinci"
++        depends on MTD_NAND_DAVINCI
++        help
++          Support for Hardware ECC on NAND device for DaVinci.
+ 
+ endif # MTD_NAND
+Index: linux-davinci/include/asm-arm/arch-davinci/nand.h
+===================================================================
+--- /dev/null
++++ linux-davinci/include/asm-arm/arch-davinci/nand.h
+@@ -0,0 +1,45 @@
++/*
++ * include/asm-arm/arch-davinci/nand.h
++ *
++ * Copyright (C) 2006 Texas Instruments.
++ *
++ * ported to 2.6.23 (C) 2008 by
++ * Sander Huijsen <Shuijsen@optelecom-nkf.com>
++ * Troy Kisky <troy.kisky@boundarydevices.com>
++ * Dirk Behme <Dirk.Behme@gmail.com>
++ *
++ * --------------------------------------------------------------------------
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ * --------------------------------------------------------------------------
++ *
++ */
++
++#ifndef __ARCH_ARM_DAVINCI_NAND_H
++#define __ARCH_ARM_DAVINCI_NAND_H
++
++#define NRCSR_OFFSET   		0x00
++#define AWCCR_OFFSET    	0x04
++#define A1CR_OFFSET		0x10
++#define NANDFCR_OFFSET 		0x60
++#define NANDFSR_OFFSET 		0x64
++#define NANDF1ECC_OFFSET	0x70
++
++#define	MASK_ALE		0x0A
++#define	MASK_CLE		0x10
++
++#define NAND_BUSY_FLAG		0x01
++
++#endif	/* __ARCH_ARM_DAVINCI_NAND_H */
+Index: linux-davinci/arch/arm/mach-davinci/mux.c
+===================================================================
+--- linux-davinci.orig/arch/arm/mach-davinci/mux.c
++++ linux-davinci/arch/arm/mach-davinci/mux.c
+@@ -15,10 +15,6 @@
+ 
+ #include <asm/arch/mux.h>
+ 
+-/* System control register offsets */
+-#define PINMUX0         0x00
+-#define PINMUX1         0x04
+-
+ static DEFINE_SPINLOCK(mux_lock);
+ 
+ void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+Index: linux-davinci/include/asm-arm/arch-davinci/mux.h
+===================================================================
+--- linux-davinci.orig/include/asm-arm/arch-davinci/mux.h
++++ linux-davinci/include/asm-arm/arch-davinci/mux.h
+@@ -11,6 +11,11 @@
+ #ifndef __ASM_ARCH_MUX_H
+ #define __ASM_ARCH_MUX_H
+ 
++/* System control register offsets */
++#define PINMUX0         	0x00
++#define PINMUX1        	 	0x04
++
++/* System control register bits */
+ #define DAVINCI_MUX_AEAW0	0
+ #define DAVINCI_MUX_AEAW1	1
+ #define DAVINCI_MUX_AEAW2	2
+Index: linux-davinci/include/linux/mtd/nand.h
+===================================================================
+--- linux-davinci.orig/include/linux/mtd/nand.h
++++ linux-davinci/include/linux/mtd/nand.h
+@@ -123,6 +123,13 @@ typedef enum {
+ 	NAND_ECC_SOFT,
+ 	NAND_ECC_HW,
+ 	NAND_ECC_HW_SYNDROME,
++#ifdef CONFIG_NAND_FLASH_HW_ECC
++	NAND_ECC_HW3_256,
++	NAND_ECC_HW3_512,
++	NAND_ECC_HW6_512,
++	NAND_ECC_HW8_512,
++	NAND_ECC_HW12_2048,
++#endif
+ } nand_ecc_modes_t;
+ 
+ /*
+Index: linux-davinci/drivers/mtd/nand/nand_base.c
+===================================================================
+--- linux-davinci.orig/drivers/mtd/nand/nand_base.c
++++ linux-davinci/drivers/mtd/nand/nand_base.c
+@@ -2456,6 +2456,13 @@ int nand_scan_tail(struct mtd_info *mtd)
+ 		chip->ecc.write_page_raw = nand_write_page_raw;
+ 
+ 	switch (chip->ecc.mode) {
++#ifdef CONFIG_NAND_FLASH_HW_ECC
++	case NAND_ECC_HW12_2048:
++	case NAND_ECC_HW8_512:
++	case NAND_ECC_HW6_512:
++	case NAND_ECC_HW3_512:
++	case NAND_ECC_HW3_256:
++#endif
+ 	case NAND_ECC_HW:
+ 		/* Use standard hwecc read page function ? */
+ 		if (!chip->ecc.read_page)
+Index: linux-davinci/arch/arm/mach-davinci/board-evm.c
+===================================================================
+--- linux-davinci.orig/arch/arm/mach-davinci/board-evm.c
++++ linux-davinci/arch/arm/mach-davinci/board-evm.c
+@@ -14,6 +14,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
+ 
+@@ -27,6 +28,7 @@
+ #include <asm/mach/flash.h>
+ 
+ #include <asm/arch/common.h>
++#include <asm/arch/hardware.h>
+ #include <asm/arch/psc.h>
+ 
+ /* other misc. init functions */
+@@ -38,7 +40,7 @@ void __init davinci_init_common_hw(void)
+ /* NOR Flash base address set to CS0 by default */
+ #define NOR_FLASH_PHYS 0x02000000
+ 
+-static struct mtd_partition davinci_evm_partitions[] = {
++static struct mtd_partition davinci_evm_norflash_partitions[] = {
+ 	/* bootloader (U-Boot, etc) in first 4 sectors */
+ 	{
+ 		.name		= "bootloader",
+@@ -69,30 +71,63 @@ static struct mtd_partition davinci_evm_
+ 	}
+ };
+ 
+-static struct physmap_flash_data davinci_evm_flash_data = {
++static struct physmap_flash_data davinci_evm_norflash_data = {
+ 	.width		= 2,
+-	.parts		= davinci_evm_partitions,
+-	.nr_parts	= ARRAY_SIZE(davinci_evm_partitions),
++	.parts		= davinci_evm_norflash_partitions,
++	.nr_parts	= ARRAY_SIZE(davinci_evm_norflash_partitions),
+ };
+ 
+ /* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
+  * limits addresses to 16M, so using addresses past 16M will wrap */
+-static struct resource davinci_evm_flash_resource = {
++static struct resource davinci_evm_norflash_resource = {
+ 	.start		= NOR_FLASH_PHYS,
+ 	.end		= NOR_FLASH_PHYS + SZ_16M - 1,
+ 	.flags		= IORESOURCE_MEM,
+ };
+ 
+-static struct platform_device davinci_evm_flash_device = {
++static struct platform_device davinci_evm_norflash_device = {
+ 	.name		= "physmap-flash",
+ 	.id		= 0,
+ 	.dev		= {
+-		.platform_data	= &davinci_evm_flash_data,
++		.platform_data	= &davinci_evm_norflash_data,
+ 	},
+ 	.num_resources	= 1,
+-	.resource	= &davinci_evm_flash_resource,
++	.resource	= &davinci_evm_norflash_resource,
+ };
+ 
++#if defined(CONFIG_MTD_NAND_DAVINCI) || defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
++struct mtd_partition davinci_evm_nandflash_partition[] = {
++	/* 5 MB space at the beginning for bootloader and kernel */
++	{
++		.name		= "NAND filesystem",
++		.offset		= 5 * SZ_1M,
++		.size		= MTDPART_SIZ_FULL,
++		.mask_flags	= 0,
++	}
++};
++
++static struct nand_platform_data davinci_evm_nandflash_data = {
++	.parts		= davinci_evm_nandflash_partition,
++	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
++};
++
++static struct resource davinci_evm_nandflash_resource = {
++	.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
++	.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16K - 1,
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device davinci_evm_nandflash_device = {
++	.name		= "davinci_nand",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &davinci_evm_nandflash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &davinci_evm_nandflash_resource,
++};
++#endif
++
+ #if defined(CONFIG_FB_DAVINCI) || defined(CONFIG_FB_DAVINCI_MODULE)
+ 
+ static u64 davinci_fb_dma_mask = DMA_32BIT_MASK;
+@@ -168,7 +203,10 @@ static struct platform_device rtc_dev = 
+ };
+ 
+ static struct platform_device *davinci_evm_devices[] __initdata = {
+-	&davinci_evm_flash_device,
++	&davinci_evm_norflash_device,
++#if defined(CONFIG_MTD_NAND_DAVINCI) || defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
++	&davinci_evm_nandflash_device,
++#endif
+ #if defined(CONFIG_FB_DAVINCI) || defined(CONFIG_FB_DAVINCI_MODULE)
+ 	&davinci_fb_device,
+ #endif
diff --git a/packages/linux/linux-davinci/davinci-sffsdr/defconfig b/packages/linux/linux-davinci/davinci-sffsdr/defconfig
index ac53caffc9..0d5155f32a 100644
--- a/packages/linux/linux-davinci/davinci-sffsdr/defconfig
+++ b/packages/linux/linux-davinci/davinci-sffsdr/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.23-davinci1
-# Sat Oct 20 12:59:22 2007
+# Sun Feb  3 08:30:51 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -241,7 +241,8 @@ CONFIG_CMDLINE=""
 #
 # At least one emulation must be selected
 #
-# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
 # CONFIG_VFP is not set
 
@@ -442,7 +443,10 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -461,13 +465,15 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_DAVINCI=y
+CONFIG_NAND_FLASH_HW_ECC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -592,10 +598,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
@@ -605,10 +608,10 @@ CONFIG_INPUT_EVDEV=m
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
@@ -623,7 +626,7 @@ CONFIG_KEYBOARD_XTKBD=y
 #
 CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
@@ -820,46 +823,14 @@ CONFIG_DAB=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_DAVINCI=y
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
@@ -874,10 +845,7 @@ CONFIG_SOUND=y
 #
 # Open Sound System
 #
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_DAVINCI is not set
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1027,20 +995,20 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
+CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 
 #
 # MMC/SD Host Controller Drivers
 #
-# CONFIG_MMC_DAVINCI is not set
+CONFIG_MMC_DAVINCI=m
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
@@ -1100,9 +1068,9 @@ CONFIG_AUTOFS4_FS=m
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -1138,7 +1106,7 @@ CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -1167,8 +1135,7 @@ CONFIG_SUNRPC=y
 # CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set