libsdl-ttf: add newer version 2.0.10

* conditionaly update libtool macros

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

2 files changed, 10328 insertions, 0 deletions

diff --git a/recipes/libsdl/libsdl-ttf-2.0.10/libtool-update.patch b/recipes/libsdl/libsdl-ttf-2.0.10/libtool-update.patch
new file mode 100644
index 0000000000..a1173cc24e
--- /dev/null
+++ b/recipes/libsdl/libsdl-ttf-2.0.10/libtool-update.patch
@@ -0,0 +1,10309 @@
+diff -uNr SDL_ttf-2.0.10.orig//acinclude/libtool.m4 SDL_ttf-2.0.10/acinclude/libtool.m4
+--- SDL_ttf-2.0.10.orig//acinclude/libtool.m4	2009-10-13 01:06:37.000000000 +0200
++++ SDL_ttf-2.0.10/acinclude/libtool.m4	2010-10-13 14:53:51.000000000 +0200
+@@ -1,9 +1,8 @@
+-##############################################################################
+-# Based on libtool-2.2.6a
+ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+ #
+ #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-#                 2006, 2007, 2008 Free Software Foundation, Inc.
++#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++#                 Inc.
+ #   Written by Gordon Matzigkeit, 1996
+ #
+ # This file is free software; the Free Software Foundation gives
+@@ -12,7 +11,8 @@
+ 
+ m4_define([_LT_COPYING], [dnl
+ #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-#                 2006, 2007, 2008 Free Software Foundation, Inc.
++#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++#                 Inc.
+ #   Written by Gordon Matzigkeit, 1996
+ #
+ #   This file is part of GNU Libtool.
+@@ -39,7 +39,7 @@
+ # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ ])
+ 
+-# serial 56 LT_INIT
++# serial 57 LT_INIT
+ 
+ 
+ # LT_PREREQ(VERSION)
+@@ -68,6 +68,7 @@
+ # ------------------
+ AC_DEFUN([LT_INIT],
+ [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+ AC_BEFORE([$0], [LT_LANG])dnl
+ AC_BEFORE([$0], [LT_OUTPUT])dnl
+ AC_BEFORE([$0], [LTDL_INIT])dnl
+@@ -84,6 +85,8 @@
+ AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+ m4_require([_LT_PROG_LTMAIN])dnl
+ 
++_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
++
+ dnl Parse OPTIONS
+ _LT_SET_OPTIONS([$0], [$1])
+ 
+@@ -91,7 +94,8 @@
+ LIBTOOL_DEPS="$ltmain"
+ 
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+ AC_SUBST(LIBTOOL)dnl
+ 
+ _LT_SETUP
+@@ -120,7 +124,7 @@
+     *) break;;
+   esac
+ done
+-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+ ])
+ 
+ 
+@@ -140,6 +144,9 @@
+ m4_defun([_LT_SETUP],
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
++
+ _LT_DECL([], [host_alias], [0], [The host system])dnl
+ _LT_DECL([], [host], [0])dnl
+ _LT_DECL([], [host_os], [0])dnl
+@@ -162,10 +169,13 @@
+ dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+ m4_require([_LT_CMD_RELOAD])dnl
+ m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+ m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+ m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_WITH_SYSROOT])dnl
+ 
+ _LT_CONFIG_LIBTOOL_INIT([
+ # See if we are running on zsh, and set the options which allow our
+@@ -181,7 +191,6 @@
+ _LT_CHECK_OBJDIR
+ 
+ m4_require([_LT_TAG_COMPILER])dnl
+-_LT_PROG_ECHO_BACKSLASH
+ 
+ case $host_os in
+ aix3*)
+@@ -195,25 +204,8 @@
+   ;;
+ esac
+ 
+-# Sed substitution that helps us do robust quoting.  It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+-
+-# Same as above, but do not quote variable references.
+-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+-
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+-
+-# Sed substitution to delay expansion of an escaped single quote.
+-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+-
+-# Sed substitution to avoid accidental globbing in evaled expressions
+-no_glob_subst='s/\*/\\\*/g'
+-
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+ 
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -252,6 +244,28 @@
+ ])# _LT_SETUP
+ 
+ 
++# _LT_PREPARE_SED_QUOTE_VARS
++# --------------------------
++# Define a few sed substitution that help us do robust quoting.
++m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
++[# Backslashify metacharacters that are still active within
++# double-quoted strings.
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++])
++
+ # _LT_PROG_LTMAIN
+ # ---------------
+ # Note that this code is called both from `configure', and `config.status'
+@@ -410,7 +424,7 @@
+ # declaration there will have the same value as in `configure'.  VARNAME
+ # must have a single quote delimited value for this to work.
+ m4_define([_LT_CONFIG_STATUS_DECLARE],
+-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
++[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+ 
+ 
+ # _LT_CONFIG_STATUS_DECLARATIONS
+@@ -420,7 +434,7 @@
+ # embedded single quotes properly.  In configure, this macro expands
+ # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+ #
+-#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
++#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+ m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+ [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+     [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+@@ -519,12 +533,20 @@
+ LTCFLAGS='$LTCFLAGS'
+ compiler='$compiler_DEFAULT'
+ 
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++\$[]1
++_LTECHO_EOF'
++}
++
+ # Quote evaled strings.
+ for var in lt_decl_all_varnames([[ \
+ ]], lt_decl_quote_varnames); do
+-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+     *[[\\\\\\\`\\"\\\$]]*)
+-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+       ;;
+     *)
+       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+@@ -535,9 +557,9 @@
+ # Double-quote double-evaled strings.
+ for var in lt_decl_all_varnames([[ \
+ ]], lt_decl_dquote_varnames); do
+-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+     *[[\\\\\\\`\\"\\\$]]*)
+-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+       ;;
+     *)
+       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+@@ -545,16 +567,38 @@
+     esac
+ done
+ 
+-# Fix-up fallback echo if it was mangled by the above quoting rules.
+-case \$lt_ECHO in
+-*'\\\[$]0 --fallback-echo"')dnl "
+-  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+-  ;;
+-esac
+-
+ _LT_OUTPUT_LIBTOOL_INIT
+ ])
+ 
++# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
++# ------------------------------------
++# Generate a child script FILE with all initialization necessary to
++# reuse the environment learned by the parent script, and make the
++# file executable.  If COMMENT is supplied, it is inserted after the
++# `#!' sequence but before initialization text begins.  After this
++# macro, additional text can be appended to FILE to form the body of
++# the child script.  The macro ends with non-zero status if the
++# file could not be fully written (such as if the disk is full).
++m4_ifdef([AS_INIT_GENERATED],
++[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
++[m4_defun([_LT_GENERATED_FILE_INIT],
++[m4_require([AS_PREPARE])]dnl
++[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
++[lt_write_fail=0
++cat >$1 <<_ASEOF || lt_write_fail=1
++#! $SHELL
++# Generated by $as_me.
++$2
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$1 <<\_ASEOF || lt_write_fail=1
++AS_SHELL_SANITIZE
++_AS_PREPARE
++exec AS_MESSAGE_FD>&1
++_ASEOF
++test $lt_write_fail = 0 && chmod +x $1[]dnl
++m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+ 
+ # LT_OUTPUT
+ # ---------
+@@ -564,20 +608,11 @@
+ AC_DEFUN([LT_OUTPUT],
+ [: ${CONFIG_LT=./config.lt}
+ AC_MSG_NOTICE([creating $CONFIG_LT])
+-cat >"$CONFIG_LT" <<_LTEOF
+-#! $SHELL
+-# Generated by $as_me.
+-# Run this file to recreate a libtool stub with the current configuration.
+-
+-lt_cl_silent=false
+-SHELL=\${CONFIG_SHELL-$SHELL}
+-_LTEOF
++_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
++[# Run this file to recreate a libtool stub with the current configuration.])
+ 
+ cat >>"$CONFIG_LT" <<\_LTEOF
+-AS_SHELL_SANITIZE
+-_AS_PREPARE
+-
+-exec AS_MESSAGE_FD>&1
++lt_cl_silent=false
+ exec AS_MESSAGE_LOG_FD>>config.log
+ {
+   echo
+@@ -603,7 +638,7 @@
+ m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+ configured by $[0], generated by m4_PACKAGE_STRING.
+ 
+-Copyright (C) 2008 Free Software Foundation, Inc.
++Copyright (C) 2010 Free Software Foundation, Inc.
+ This config.lt script is free software; the Free Software Foundation
+ gives unlimited permision to copy, distribute and modify it."
+ 
+@@ -648,15 +683,13 @@
+ # appending to config.log, which fails on DOS, as config.log is still kept
+ # open by configure.  Here we exec the FD to /dev/null, effectively closing
+ # config.log, so it can be properly (re)opened and appended to by config.lt.
+-if test "$no_create" != yes; then
+-  lt_cl_success=:
+-  test "$silent" = yes &&
+-    lt_config_lt_args="$lt_config_lt_args --quiet"
+-  exec AS_MESSAGE_LOG_FD>/dev/null
+-  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+-  exec AS_MESSAGE_LOG_FD>>config.log
+-  $lt_cl_success || AS_EXIT(1)
+-fi
++lt_cl_success=:
++test "$silent" = yes &&
++  lt_config_lt_args="$lt_config_lt_args --quiet"
++exec AS_MESSAGE_LOG_FD>/dev/null
++$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++exec AS_MESSAGE_LOG_FD>>config.log
++$lt_cl_success || AS_EXIT(1)
+ ])# LT_OUTPUT
+ 
+ 
+@@ -719,15 +752,12 @@
+   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+   # text mode, it properly converts lines to CR/LF.  This bash problem
+   # is reportedly fixed, but why not run on old versions too?
+-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+-    || (rm -f "$cfgfile"; exit 1)
++  sed '$q' "$ltmain" >> "$cfgfile" \
++     || (rm -f "$cfgfile"; exit 1)
+ 
+-  _LT_PROG_XSI_SHELLFNS
++  _LT_PROG_REPLACE_SHELLFNS
+ 
+-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+-    || (rm -f "$cfgfile"; exit 1)
+-
+-  mv -f "$cfgfile" "$ofile" ||
++   mv -f "$cfgfile" "$ofile" ||
+     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+   chmod +x "$ofile"
+ ],
+@@ -833,11 +863,13 @@
+ AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+ AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+ AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+ dnl aclocal-1.4 backwards compatibility:
+ dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+ dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+ dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+ dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
++dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+ 
+ 
+ # _LT_TAG_COMPILER
+@@ -942,6 +974,31 @@
+ 	[lt_cv_ld_exported_symbols_list=no])
+ 	LDFLAGS="$save_LDFLAGS"
+     ])
++    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
++      [lt_cv_ld_force_load=no
++      cat > conftest.c << _LT_EOF
++int forced_loaded() { return 2;}
++_LT_EOF
++      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
++      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
++      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
++      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
++      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
++      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
++      cat > conftest.c << _LT_EOF
++int main() { return 0;}
++_LT_EOF
++      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
++      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
++      _lt_result=$?
++      if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
++	lt_cv_ld_force_load=yes
++      else
++	cat conftest.err >&AS_MESSAGE_LOG_FD
++      fi
++        rm -f conftest.err libconftest.a conftest conftest.c
++        rm -rf conftest.dSYM
++    ])
+     case $host_os in
+     rhapsody* | darwin1.[[012]])
+       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+@@ -969,7 +1026,7 @@
+     else
+       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+     fi
+-    if test "$DSYMUTIL" != ":"; then
++    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+       _lt_dsymutil='~$DSYMUTIL $lib || :'
+     else
+       _lt_dsymutil=
+@@ -989,7 +1046,11 @@
+   _LT_TAGVAR(hardcode_direct, $1)=no
+   _LT_TAGVAR(hardcode_automatic, $1)=yes
+   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+-  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++  if test "$lt_cv_ld_force_load" = "yes"; then
++    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
++  else
++    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++  fi
+   _LT_TAGVAR(link_all_deplibs, $1)=yes
+   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+   case $cc_basename in
+@@ -997,7 +1058,7 @@
+      *) _lt_dar_can_shared=$GCC ;;
+   esac
+   if test "$_lt_dar_can_shared" = "yes"; then
+-    output_verbose_link_cmd=echo
++    output_verbose_link_cmd=func_echo_all
+     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+     _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+@@ -1013,203 +1074,142 @@
+   fi
+ ])
+ 
+-# _LT_SYS_MODULE_PATH_AIX
+-# -----------------------
++# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
++# ----------------------------------
+ # Links a minimal program and checks the executable
+ # for the system default hardcoded library path. In most cases,
+ # this is /usr/lib:/lib, but when the MPI compilers are used
+ # the location of the communication and MPI libs are included too.
+ # If we don't find anything, use the default library path according
+ # to the aix ld manual.
++# Store the results from the different compilers for each TAGNAME.
++# Allow to override them for all tags through lt_cv_aix_libpath.
+ m4_defun([_LT_SYS_MODULE_PATH_AIX],
+ [m4_require([_LT_DECL_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+-    /Import File Strings/,/^$/ {
+-	/^0/ {
+-	    s/^0  *\(.*\)$/\1/
+-	    p
+-	}
+-    }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++if test "${lt_cv_aix_libpath+set}" = set; then
++  aix_libpath=$lt_cv_aix_libpath
++else
++  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
++  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
++  lt_aix_libpath_sed='[
++      /Import File Strings/,/^$/ {
++	  /^0/ {
++	      s/^0  *\([^ ]*\) *$/\1/
++	      p
++	  }
++      }]'
++  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++  # Check for a 64-bit object if we didn't find anything.
++  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++  fi],[])
++  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
++  fi
++  ])
++  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
++fi
+ ])# _LT_SYS_MODULE_PATH_AIX
+ 
+ 
+ # _LT_SHELL_INIT(ARG)
+ # -------------------
+ m4_define([_LT_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+-	 [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_SHELL_INIT
++[m4_divert_text([M4SH-INIT], [$1
++])])# _LT_SHELL_INIT
++
+ 
+ 
+ # _LT_PROG_ECHO_BACKSLASH
+ # -----------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
++# Find how we can fake an echo command that does not interpret backslash.
++# In particular, with Autoconf 2.60 or later we add some code to the start
++# of the generated configure script which will find a shell with a builtin
++# printf (which we can use as an echo command).
+ m4_defun([_LT_PROG_ECHO_BACKSLASH],
+-[_LT_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-
+-case X$lt_ECHO in
+-X*--fallback-echo)
+-  # Remove one level of quotation (which was required for Make).
+-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+-  ;;
+-esac
+-
+-ECHO=${lt_ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+-  # Discard the --no-reexec flag, and continue.
+-  shift
+-elif test "X[$]1" = X--fallback-echo; then
+-  # Avoid inline document here, it may be left over
+-  :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+-  # Yippee, $ECHO works!
+-  :
++[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++
++AC_MSG_CHECKING([how to print strings])
++# Test print first, because it will be a builtin if present.
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
++   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
++  ECHO='print -r --'
++elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
++  ECHO='printf %s\n'
+ else
+-  # Restart under the correct shell.
+-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+-fi
+-
+-if test "X[$]1" = X--fallback-echo; then
+-  # used as fallback echo
+-  shift
+-  cat <<_LT_EOF
+-[$]*
+-_LT_EOF
+-  exit 0
++  # Use this function as a fallback that always works.
++  func_fallback_echo ()
++  {
++    eval 'cat <<_LTECHO_EOF
++$[]1
++_LTECHO_EOF'
++  }
++  ECHO='func_fallback_echo'
+ fi
+ 
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+-
+-if test -z "$lt_ECHO"; then
+-  if test "X${echo_test_string+set}" != Xset; then
+-    # find a string as large as possible, as long as the shell can cope with it
+-    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+-	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+-      then
+-        break
+-      fi
+-    done
+-  fi
+-
+-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+-     test "X$echo_testing_string" = "X$echo_test_string"; then
+-    :
+-  else
+-    # The Solaris, AIX, and Digital Unix default echo programs unquote
+-    # backslashes.  This makes it impossible to quote backslashes using
+-    #   echo "$something" | sed 's/\\/\\\\/g'
+-    #
+-    # So, first we look for a working echo in the user's PATH.
+-
+-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+-    for dir in $PATH /usr/ucb; do
+-      IFS="$lt_save_ifs"
+-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+-         test "X$echo_testing_string" = "X$echo_test_string"; then
+-        ECHO="$dir/echo"
+-        break
+-      fi
+-    done
+-    IFS="$lt_save_ifs"
+-
+-    if test "X$ECHO" = Xecho; then
+-      # We didn't find a better echo, so look for alternatives.
+-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+-         test "X$echo_testing_string" = "X$echo_test_string"; then
+-        # This shell has a builtin print -r that does the trick.
+-        ECHO='print -r'
+-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+-	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+-        # If we have ksh, try running configure again with it.
+-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+-        export ORIGINAL_CONFIG_SHELL
+-        CONFIG_SHELL=/bin/ksh
+-        export CONFIG_SHELL
+-        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+-      else
+-        # Try using printf.
+-        ECHO='printf %s\n'
+-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+-	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+-	   test "X$echo_testing_string" = "X$echo_test_string"; then
+-	  # Cool, printf works
+-	  :
+-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+-	     test "X$echo_testing_string" = 'X\t' &&
+-	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+-	     test "X$echo_testing_string" = "X$echo_test_string"; then
+-	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+-	  export CONFIG_SHELL
+-	  SHELL="$CONFIG_SHELL"
+-	  export SHELL
+-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+-        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+-	     test "X$echo_testing_string" = 'X\t' &&
+-	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+-	     test "X$echo_testing_string" = "X$echo_test_string"; then
+-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+-        else
+-	  # maybe with a smaller string...
+-	  prev=:
+-
+-	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+-	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+-	    then
+-	      break
+-	    fi
+-	    prev="$cmd"
+-	  done
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++    $ECHO "$*" 
++}
+ 
+-	  if test "$prev" != 'sed 50q "[$]0"'; then
+-	    echo_test_string=`eval $prev`
+-	    export echo_test_string
+-	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+-	  else
+-	    # Oops.  We lost completely, so just stick with echo.
+-	    ECHO=echo
+-	  fi
+-        fi
+-      fi
+-    fi
+-  fi
+-fi
++case "$ECHO" in
++  printf*) AC_MSG_RESULT([printf]) ;;
++  print*) AC_MSG_RESULT([print -r]) ;;
++  *) AC_MSG_RESULT([cat]) ;;
++esac
+ 
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-lt_ECHO=$ECHO
+-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+-   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
++m4_ifdef([_AS_DETECT_SUGGESTED],
++[_AS_DETECT_SUGGESTED([
++  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
++    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++    PATH=/empty FPATH=/empty; export PATH FPATH
++    test "X`printf %s $ECHO`" = "X$ECHO" \
++      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+ 
+-AC_SUBST(lt_ECHO)
+-])
+ _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+-_LT_DECL([], [ECHO], [1],
+-    [An echo program that does not interpret backslashes])
++_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+ ])# _LT_PROG_ECHO_BACKSLASH
+ 
+ 
++# _LT_WITH_SYSROOT
++# ----------------
++AC_DEFUN([_LT_WITH_SYSROOT],
++[AC_MSG_CHECKING([for sysroot])
++AC_ARG_WITH([sysroot],
++[  --with-sysroot[=DIR] Search for dependent libraries within DIR
++                        (or the compiler's sysroot if not specified).],
++[], [with_sysroot=no])
++
++dnl lt_sysroot will always be passed unquoted.  We quote it here
++dnl in case the user passed a directory name.
++lt_sysroot=
++case ${with_sysroot} in #(
++ yes)
++   if test "$GCC" = yes; then
++     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++   fi
++   ;; #(
++ /*)
++   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
++   ;; #(
++ no|'')
++   ;; #(
++ *)
++   AC_MSG_RESULT([${with_sysroot}])
++   AC_MSG_ERROR([The sysroot must be an absolute path.])
++   ;;
++esac
++
++ AC_MSG_RESULT([${lt_sysroot:-no}])
++_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
++[dependent libraries, and in which our libraries should be installed.])])
++
+ # _LT_ENABLE_LOCK
+ # ---------------
+ m4_defun([_LT_ENABLE_LOCK],
+@@ -1238,7 +1238,7 @@
+   ;;
+ *-*-irix6*)
+   # Find out which ABI we are using.
+-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+   if AC_TRY_EVAL(ac_compile); then
+     if test "$lt_cv_prog_gnu_ld" = yes; then
+       case `/usr/bin/file conftest.$ac_objext` in
+@@ -1356,14 +1356,47 @@
+ ])# _LT_ENABLE_LOCK
+ 
+ 
++# _LT_PROG_AR
++# -----------
++m4_defun([_LT_PROG_AR],
++[AC_CHECK_TOOLS(AR, [ar], false)
++: ${AR=ar}
++: ${AR_FLAGS=cru}
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
++
++AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
++  [lt_cv_ar_at_file=no
++   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
++     [echo conftest.$ac_objext > conftest.lst
++      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
++      AC_TRY_EVAL([lt_ar_try])
++      if test "$ac_status" -eq 0; then
++	# Ensure the archiver fails upon bogus file names.
++	rm -f conftest.$ac_objext libconftest.a
++	AC_TRY_EVAL([lt_ar_try])
++	if test "$ac_status" -ne 0; then
++          lt_cv_ar_at_file=@
++        fi
++      fi
++      rm -f conftest.* libconftest.a
++     ])
++  ])
++
++if test "x$lt_cv_ar_at_file" = xno; then
++  archiver_list_spec=
++else
++  archiver_list_spec=$lt_cv_ar_at_file
++fi
++_LT_DECL([], [archiver_list_spec], [1],
++  [How to feed a file listing to the archiver])
++])# _LT_PROG_AR
++
++
+ # _LT_CMD_OLD_ARCHIVE
+ # -------------------
+ m4_defun([_LT_CMD_OLD_ARCHIVE],
+-[AC_CHECK_TOOL(AR, ar, false)
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-_LT_DECL([], [AR], [1], [The archiver])
+-_LT_DECL([], [AR_FLAGS], [1])
++[_LT_PROG_AR
+ 
+ AC_CHECK_TOOL(STRIP, strip, :)
+ test -z "$STRIP" && STRIP=:
+@@ -1390,10 +1423,19 @@
+   esac
+   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ fi
++
++case $host_os in
++  darwin*)
++    lock_old_archive_extraction=yes ;;
++  *)
++    lock_old_archive_extraction=no ;;
++esac
+ _LT_DECL([], [old_postinstall_cmds], [2])
+ _LT_DECL([], [old_postuninstall_cmds], [2])
+ _LT_TAGDECL([], [old_archive_cmds], [2],
+     [Commands used to build an old-style archive])
++_LT_DECL([], [lock_old_archive_extraction], [0],
++    [Whether to use a lock for old archive extraction])
+ ])# _LT_CMD_OLD_ARCHIVE
+ 
+ 
+@@ -1418,15 +1460,15 @@
+    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+    -e 's:$: $lt_compiler_flag:'`
+-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+    (eval "$lt_compile" 2>conftest.err)
+    ac_status=$?
+    cat conftest.err >&AS_MESSAGE_LOG_FD
+-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+    if (exit $ac_status) && test -s "$ac_outfile"; then
+      # The compiler can only warn and ignore the option if not recognized
+      # So say no if there are warnings other than the usual output.
+-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+        $2=yes
+@@ -1466,7 +1508,7 @@
+      if test -s conftest.err; then
+        # Append any errors to the config.log.
+        cat conftest.err 1>&AS_MESSAGE_LOG_FD
+-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+        if diff conftest.exp conftest.er2 >/dev/null; then
+          $2=yes
+@@ -1529,9 +1571,8 @@
+     lt_cv_sys_max_cmd_len=8192;
+     ;;
+ 
+-  beos*)
+-    # On BeOS, this test takes a really really long time.
+-    # So we just punt and use a minimum line length of 8192.
++  mint*)
++    # On MiNT this can take a long time and run out of memory.
+     lt_cv_sys_max_cmd_len=8192;
+     ;;
+ 
+@@ -1599,8 +1640,8 @@
+       # If test is not a shell built-in, we'll probably end up computing a
+       # maximum length that is only half of the actual maximum length, but
+       # we can't tell.
+-      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+-	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
++      while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
++	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ 	      test $i != 17 # 1/2 MB should be enough
+       do
+         i=`expr $i + 1`
+@@ -1651,7 +1692,7 @@
+   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+   lt_status=$lt_dlunknown
+   cat > conftest.$ac_ext <<_LT_EOF
+-[#line __oline__ "configure"
++[#line $LINENO "configure"
+ #include "confdefs.h"
+ 
+ #if HAVE_DLFCN_H
+@@ -1692,7 +1733,13 @@
+ #  endif
+ #endif
+ 
+-void fnord() { int i=42;}
++/* When -fvisbility=hidden is used, assume the code has been annotated
++   correspondingly for the symbols needed.  */
++#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
++int fnord () __attribute__((visibility("default")));
++#endif
++
++int fnord () { return 42; }
+ int main ()
+ {
+   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -1701,7 +1748,11 @@
+   if (self)
+     {
+       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++      else
++        {
++	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
++          else puts (dlerror ());
++	}
+       /* dlclose (self); */
+     }
+   else
+@@ -1877,16 +1928,16 @@
+    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+    -e 's:$: $lt_compiler_flag:'`
+-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+    (eval "$lt_compile" 2>out/conftest.err)
+    ac_status=$?
+    cat out/conftest.err >&AS_MESSAGE_LOG_FD
+-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+    if (exit $ac_status) && test -s out/conftest2.$ac_objext
+    then
+      # The compiler can only warn and ignore the option if not recognized
+      # So say no if there are warnings
+-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+        _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+@@ -2045,6 +2096,7 @@
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_OBJDUMP])dnl
+ m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+ AC_MSG_CHECKING([dynamic linker characteristics])
+ m4_if([$1],
+ 	[], [
+@@ -2053,16 +2105,23 @@
+     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+     *) lt_awk_arg="/^libraries:/" ;;
+   esac
+-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
++  case $host_os in
++    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
++    *) lt_sed_strip_eq="s,=/,/,g" ;;
++  esac
++  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
++  case $lt_search_path_spec in
++  *\;*)
+     # if the path contains ";" then we assume it to be the separator
+     # otherwise default to the standard path separator (i.e. ":") - it is
+     # assumed that no part of a normal pathname contains ";" but that should
+     # okay in the real world where ";" in dirpaths is itself problematic.
+-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+-  else
+-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+-  fi
++    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
++    ;;
++  *)
++    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
++    ;;
++  esac
+   # Ok, now we have the path, separated by spaces, we can step through it
+   # and add multilib dir if necessary.
+   lt_tmp_lt_search_path_spec=
+@@ -2075,7 +2134,7 @@
+ 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+     fi
+   done
+-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
++  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+ BEGIN {RS=" "; FS="/|\n";} {
+   lt_foo="";
+   lt_count=0;
+@@ -2095,7 +2154,13 @@
+   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+ }'`
+-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
++  # AWK program above erroneously prepends '/' to C:/dos/paths
++  # for these hosts.
++  case $host_os in
++    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
++      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
++  esac
++  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+ else
+   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ fi])
+@@ -2183,7 +2248,7 @@
+   m68k)
+     library_names_spec='$libname.ixlibrary $libname.a'
+     # Create ${libname}_ixlibrary.a entries in /sys/libs.
+-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+     ;;
+   esac
+   ;;
+@@ -2214,8 +2279,9 @@
+   need_version=no
+   need_lib_prefix=no
+ 
+-  case $GCC,$host_os in
+-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++  case $GCC,$cc_basename in
++  yes,*)
++    # gcc
+     library_names_spec='$libname.dll.a'
+     # DLL is installed to $(libdir)/../bin by postinstall_cmds
+     postinstall_cmds='base_file=`basename \${file}`~
+@@ -2235,39 +2301,84 @@
+     case $host_os in
+     cygwin*)
+       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+-      #soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+-      soname_spec='`echo ${libname} | sed -e 's/^lib//'`${shared_ext}'
+-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++m4_if([$1], [],[
++      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+       ;;
+     mingw* | cegcc*)
+       # MinGW DLLs use traditional 'lib' prefix
+-      #soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+-      soname_spec='`echo ${libname} | $SED -e 's/^lib//'`${shared_ext}'
+-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+-        # It is most probably a Windows format PATH printed by
+-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+-        # path with ; separators, and with drive letters. We can handle the
+-        # drive letters (cygwin fileutils understands them), so leave them,
+-        # especially as we might pass files found there to a mingw objdump,
+-        # which wouldn't understand a cygwinified path. Ahh.
+-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+-      else
+-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+-      fi
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+       ;;
+     pw32*)
+       # pw32 DLLs use 'pw' prefix rather than 'lib'
+       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+       ;;
+     esac
++    dynamic_linker='Win32 ld.exe'
++    ;;
++
++  *,cl*)
++    # Native MSVC
++    libname_spec='$name'
++    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++    library_names_spec='${libname}.dll.lib'
++
++    case $build_os in
++    mingw*)
++      sys_lib_search_path_spec=
++      lt_save_ifs=$IFS
++      IFS=';'
++      for lt_path in $LIB
++      do
++        IFS=$lt_save_ifs
++        # Let DOS variable expansion print the short 8.3 style file name.
++        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++      done
++      IFS=$lt_save_ifs
++      # Convert to MSYS style.
++      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
++      ;;
++    cygwin*)
++      # Convert to unix form, then to dos form, then back to unix form
++      # but this time dos style (no spaces!) so that the unix form looks
++      # like /cygdrive/c/PROGRA~1:/cygdr...
++      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++      ;;
++    *)
++      sys_lib_search_path_spec="$LIB"
++      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++        # It is most probably a Windows format PATH.
++        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      # FIXME: find the short name or the path components, as spaces are
++      # common. (e.g. "Program Files" -> "PROGRA~1")
++      ;;
++    esac
++
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $RM \$dlpath'
++    shlibpath_overrides_runpath=yes
++    dynamic_linker='Win32 link.exe'
+     ;;
+ 
+   *)
++    # Assume MSVC wrapper
+     library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    dynamic_linker='Win32 ld.exe'
+     ;;
+   esac
+-  dynamic_linker='Win32 ld.exe'
+   # FIXME: first we should search . and the directory the executable is in
+   shlibpath_var=PATH
+   ;;
+@@ -2354,6 +2465,19 @@
+   hardcode_into_libs=yes
+   ;;
+ 
++haiku*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  dynamic_linker="$host_os runtime_loader"
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
++  hardcode_into_libs=yes
++  ;;
++
+ hpux9* | hpux10* | hpux11*)
+   # Give a soname corresponding to the major version so that dld.sl refuses to
+   # link against other versions.
+@@ -2396,8 +2520,10 @@
+     soname_spec='${libname}${release}${shared_ext}$major'
+     ;;
+   esac
+-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
++  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+   postinstall_cmds='chmod 555 $lib'
++  # or fails outright, so override atomically:
++  install_override_mode=555
+   ;;
+ 
+ interix[[3-9]]*)
+@@ -2455,7 +2581,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
+   version_type=linux
+   need_lib_prefix=no
+   need_version=no
+@@ -2464,16 +2590,21 @@
+   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+   shlibpath_var=LD_LIBRARY_PATH
+   shlibpath_overrides_runpath=no
++
+   # Some binutils ld are patched to set DT_RUNPATH
+-  save_LDFLAGS=$LDFLAGS
+-  save_libdir=$libdir
+-  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+-       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+-  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+-    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+-       [shlibpath_overrides_runpath=yes])])
+-  LDFLAGS=$save_LDFLAGS
+-  libdir=$save_libdir
++  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
++    [lt_cv_shlibpath_overrides_runpath=no
++    save_LDFLAGS=$LDFLAGS
++    save_libdir=$libdir
++    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
++	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
++    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
++	 [lt_cv_shlibpath_overrides_runpath=yes])])
++    LDFLAGS=$save_LDFLAGS
++    libdir=$save_libdir
++    ])
++  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+ 
+   # This implies no fast_install, which is unacceptable.
+   # Some rework will be needed to allow for fast_install
+@@ -2482,7 +2613,7 @@
+ 
+   # Append ld.so.conf contents to the search path
+   if test -f /etc/ld.so.conf; then
+-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+   fi
+ 
+@@ -2715,6 +2846,8 @@
+     The last name is the one that the linker finds with -lNAME]])
+ _LT_DECL([], [soname_spec], [1],
+     [[The coded name of the library, if different from the real name]])
++_LT_DECL([], [install_override_mode], [1],
++    [Permission mode override for installation of shared libraries])
+ _LT_DECL([], [postinstall_cmds], [2],
+     [Command to use after installation of a shared archive])
+ _LT_DECL([], [postuninstall_cmds], [2],
+@@ -2827,6 +2960,7 @@
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ m4_require([_LT_DECL_SED])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+ 
+ AC_ARG_WITH([gnu-ld],
+     [AS_HELP_STRING([--with-gnu-ld],
+@@ -2948,6 +3082,11 @@
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ case $host_os in
++  cygwin* | mingw* | pw32* | cegcc*)
++    if test "$GCC" != yes; then
++      reload_cmds=false
++    fi
++    ;;
+   darwin*)
+     if test "$GCC" = yes; then
+       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+@@ -2956,8 +3095,8 @@
+     fi
+     ;;
+ esac
+-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+-_LT_DECL([], [reload_cmds], [2])dnl
++_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
++_LT_TAGDECL([], [reload_cmds], [2])dnl
+ ])# _LT_CMD_RELOAD
+ 
+ 
+@@ -3002,7 +3141,6 @@
+ cygwin*)
+   # func_win32_libid is a shell function defined in ltmain.sh
+   lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+-  lt_cv_deplibs_check_method=pass_all
+   lt_cv_file_magic_cmd='func_win32_libid'
+   ;;
+ 
+@@ -3010,17 +3148,18 @@
+   # Base MSYS/MinGW do not provide the 'file' command needed by
+   # func_win32_libid shell function, so use a weaker test based on 'objdump',
+   # unless we find 'file', for example because we are cross-compiling.
+-  if ( file / ) >/dev/null 2>&1; then
++  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
++  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+     lt_cv_file_magic_cmd='func_win32_libid'
+   else
+-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++    # Keep this pattern in sync with the one in func_win32_libid.
++    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+     lt_cv_file_magic_cmd='$OBJDUMP -f'
+   fi
+-  lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
+-cegcc)
++cegcc*)
+   # use the weaker test based on 'objdump'. See mingw*.
+   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+   lt_cv_file_magic_cmd='$OBJDUMP -f'
+@@ -3050,6 +3189,10 @@
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
++haiku*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
+ hpux10.20* | hpux11*)
+   lt_cv_file_magic_cmd=/usr/bin/file
+   case $host_cpu in
+@@ -3058,11 +3201,11 @@
+     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+     ;;
+   hppa*64*)
+-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
++    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+     ;;
+   *)
+-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
++    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+     lt_cv_file_magic_test_file=/usr/lib/libc.sl
+     ;;
+   esac
+@@ -3084,7 +3227,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux* | k*bsd*-gnu)
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
+@@ -3162,6 +3305,21 @@
+   ;;
+ esac
+ ])
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++  case $host_os in
++  mingw* | pw32*)
++    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++      want_nocaseglob=yes
++    else
++      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
++    fi
++    ;;
++  esac
++fi
++
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -3169,7 +3327,11 @@
+ _LT_DECL([], [deplibs_check_method], [1],
+     [Method to check whether dependent libraries are shared objects])
+ _LT_DECL([], [file_magic_cmd], [1],
+-    [Command to use when deplibs_check_method == "file_magic"])
++    [Command to use when deplibs_check_method = "file_magic"])
++_LT_DECL([], [file_magic_glob], [1],
++    [How to find potential files when deplibs_check_method = "file_magic"])
++_LT_DECL([], [want_nocaseglob], [1],
++    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+ ])# _LT_CHECK_MAGIC_METHOD
+ 
+ 
+@@ -3226,7 +3388,19 @@
+   NM="$lt_cv_path_NM"
+ else
+   # Didn't find any BSD compatible name lister, look for dumpbin.
+-  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
++  if test -n "$DUMPBIN"; then :
++    # Let the user override the test.
++  else
++    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
++    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
++    *COFF*)
++      DUMPBIN="$DUMPBIN -symbols"
++      ;;
++    *)
++      DUMPBIN=:
++      ;;
++    esac
++  fi
+   AC_SUBST([DUMPBIN])
+   if test "$DUMPBIN" != ":"; then
+     NM="$DUMPBIN"
+@@ -3239,13 +3413,13 @@
+ AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+   [lt_cv_nm_interface="BSD nm"
+   echo "int some_variable = 0;" > conftest.$ac_ext
+-  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
++  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$ac_compile" 2>conftest.err)
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+-  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
++  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+-  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
++  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+   cat conftest.out >&AS_MESSAGE_LOG_FD
+   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+     lt_cv_nm_interface="MS dumpbin"
+@@ -3260,6 +3434,67 @@
+ dnl AC_DEFUN([AM_PROG_NM], [])
+ dnl AC_DEFUN([AC_PROG_NM], [])
+ 
++# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++# --------------------------------
++# how to determine the name of the shared library
++# associated with a specific link library.
++#  -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++m4_require([_LT_DECL_DLLTOOL])
++AC_CACHE_CHECK([how to associate runtime and link libraries],
++lt_cv_sharedlib_from_linklib_cmd,
++[lt_cv_sharedlib_from_linklib_cmd='unknown'
++
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++  # two different shell functions defined in ltmain.sh
++  # decide which to use based on capabilities of $DLLTOOL
++  case `$DLLTOOL --help 2>&1` in
++  *--identify-strict*)
++    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++    ;;
++  *)
++    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++    ;;
++  esac
++  ;;
++*)
++  # fallback: assume linklib IS sharedlib
++  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++  ;;
++esac
++])
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
++    [Command to associate shared and link libraries])
++])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++
++
++# _LT_PATH_MANIFEST_TOOL
++# ----------------------
++# locate the manifest tool
++m4_defun([_LT_PATH_MANIFEST_TOOL],
++[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
++  [lt_cv_path_mainfest_tool=no
++  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
++  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++  cat conftest.err >&AS_MESSAGE_LOG_FD
++  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++    lt_cv_path_mainfest_tool=yes
++  fi
++  rm -f conftest*])
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++  MANIFEST_TOOL=:
++fi
++_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
++])# _LT_PATH_MANIFEST_TOOL
++
+ 
+ # LT_LIB_M
+ # --------
+@@ -3268,7 +3503,7 @@
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ LIBM=
+ case $host in
+-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
++*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+   # These system don't have libm, or don't need it
+   ;;
+ *-ncr-sysv4.3*)
+@@ -3296,7 +3531,12 @@
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ 
+ if test "$GCC" = yes; then
+-  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++  case $cc_basename in
++  nvcc*)
++    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
++  *)
++    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
++  esac
+ 
+   _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+     lt_cv_prog_compiler_rtti_exceptions,
+@@ -3313,6 +3553,7 @@
+ m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+ [AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_AWK])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
+ AC_REQUIRE([LT_PATH_LD])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -3380,8 +3621,8 @@
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ 
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+ 
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -3417,6 +3658,7 @@
+   else
+     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+   fi
++  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+ 
+   # Check to see that the pipe works correctly.
+   pipe_works=no
+@@ -3438,7 +3680,7 @@
+   if AC_TRY_EVAL(ac_compile); then
+     # Now try to grab the symbols.
+     nlist=conftest.nm
+-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
++    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+       # Try sorting and uniquifying the output.
+       if sort "$nlist" | uniq > "$nlist"T; then
+ 	mv -f "$nlist"T "$nlist"
+@@ -3450,6 +3692,18 @@
+       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ 	  cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++   relocations are performed -- see ld's documentation on pseudo-relocs.  */
++# define LT@&t@_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data.  */
++# define LT@&t@_DLSYM_CONST
++#else
++# define LT@&t@_DLSYM_CONST const
++#endif
++
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -3461,7 +3715,7 @@
+ 	  cat <<_LT_EOF >> conftest.$ac_ext
+ 
+ /* The mapping between symbol names and symbols.  */
+-const struct {
++LT@&t@_DLSYM_CONST struct {
+   const char *name;
+   void       *address;
+ }
+@@ -3487,15 +3741,15 @@
+ _LT_EOF
+ 	  # Now try linking the two files.
+ 	  mv conftest.$ac_objext conftstm.$ac_objext
+-	  lt_save_LIBS="$LIBS"
+-	  lt_save_CFLAGS="$CFLAGS"
++	  lt_globsym_save_LIBS=$LIBS
++	  lt_globsym_save_CFLAGS=$CFLAGS
+ 	  LIBS="conftstm.$ac_objext"
+ 	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ 	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ 	    pipe_works=yes
+ 	  fi
+-	  LIBS="$lt_save_LIBS"
+-	  CFLAGS="$lt_save_CFLAGS"
++	  LIBS=$lt_globsym_save_LIBS
++	  CFLAGS=$lt_globsym_save_CFLAGS
+ 	else
+ 	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ 	fi
+@@ -3528,6 +3782,13 @@
+   AC_MSG_RESULT(ok)
+ fi
+ 
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++  nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
++  nm_file_list_spec='@'
++fi
++
+ _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+     [Take the output of nm and produce a listing of raw symbols and C names])
+ _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+@@ -3538,6 +3799,8 @@
+ _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+     [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+     [Transform the output of nm in a C name address pair when lib prefix is needed])
++_LT_DECL([], [nm_file_list_spec], [1],
++    [Specify filename containing input files for $NM])
+ ]) # _LT_CMD_GLOBAL_SYMBOLS
+ 
+ 
+@@ -3549,7 +3812,6 @@
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ 
+-AC_MSG_CHECKING([for $compiler option to produce PIC])
+ m4_if([$1], [CXX], [
+   # C++ specific cases for pic, static, wl, etc.
+   if test "$GXX" = yes; then
+@@ -3600,6 +3862,11 @@
+       # DJGPP does not support shared libraries at all
+       _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+       ;;
++    haiku*)
++      # PIC is the default for Haiku.
++      # The "-static" flag exists, but is broken.
++      _LT_TAGVAR(lt_prog_compiler_static, $1)=
++      ;;
+     interix[[3-9]]*)
+       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+       # Instead, we relocate shared libraries at runtime.
+@@ -3649,6 +3916,12 @@
+ 	  ;;
+ 	esac
+ 	;;
++      mingw* | cygwin* | os2* | pw32* | cegcc*)
++	# This hack is so that the source file can tell whether it is being
++	# built for inclusion in a dll (and should export symbols for example).
++	m4_if([$1], [GCJ], [],
++	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++	;;
+       dgux*)
+ 	case $cc_basename in
+ 	  ec++*)
+@@ -3705,7 +3978,7 @@
+ 	    ;;
+ 	esac
+ 	;;
+-      linux* | k*bsd*-gnu)
++      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ 	case $cc_basename in
+ 	  KCC*)
+ 	    # KAI C++ Compiler
+@@ -3738,8 +4011,8 @@
+ 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ 	    ;;
+-	  xlc* | xlC*)
+-	    # IBM XL 8.0 on PPC
++	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
++	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+ 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+@@ -3801,7 +4074,7 @@
+ 	;;
+       solaris*)
+ 	case $cc_basename in
+-	  CC*)
++	  CC* | sunCC*)
+ 	    # Sun C++ 4.2, 5.x and Centerline C++
+ 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+@@ -3905,6 +4178,12 @@
+       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+       ;;
+ 
++    haiku*)
++      # PIC is the default for Haiku.
++      # The "-static" flag exists, but is broken.
++      _LT_TAGVAR(lt_prog_compiler_static, $1)=
++      ;;
++
+     hpux*)
+       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+@@ -3947,6 +4226,13 @@
+       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+       ;;
+     esac
++
++    case $cc_basename in
++    nvcc*) # Cuda Compiler Driver 2.2
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
++      ;;
++    esac
+   else
+     # PORTME Check for flag to pass linker flags through the system compiler.
+     case $host_os in
+@@ -3989,7 +4275,7 @@
+       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+       ;;
+ 
+-    linux* | k*bsd*-gnu)
++    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+       case $cc_basename in
+       # old Intel for x86_64 which still supported -KPIC.
+       ecc*)
+@@ -4010,7 +4296,13 @@
+ 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ 	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ 	;;
+-      pgcc* | pgf77* | pgf90* | pgf95*)
++      nagfor*)
++	# NAG Fortran compiler
++	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
++	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	;;
++      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+         # Portland Group compilers (*not* the Pentium gcc compiler,
+ 	# which looks to be a dead project)
+ 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+@@ -4022,25 +4314,25 @@
+         # All Alpha code is PIC.
+         _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+         ;;
+-      xl*)
+-	# IBM XL C 8.0/Fortran 10.1 on PPC
++      xl* | bgxl* | bgf* | mpixl*)
++	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ 	;;
+       *)
+ 	case `$CC -V 2>&1 | sed 5q` in
+-	*Sun\ C*)
+-	  # Sun C 5.9
++	*Sun\ F* | *Sun*Fortran*)
++	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ 	  ;;
+-	*Sun\ F*)
+-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
++	*Sun\ C*)
++	  # Sun C 5.9
+ 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
++	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ 	  ;;
+ 	esac
+ 	;;
+@@ -4072,7 +4364,7 @@
+       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+       case $cc_basename in
+-      f77* | f90* | f95*)
++      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+       *)
+ 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+@@ -4129,9 +4421,11 @@
+     _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+     ;;
+ esac
+-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+-	[How to pass a linker flag through the compiler])
++
++AC_CACHE_CHECK([for $compiler option to produce PIC],
++  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
++  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+ 
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -4150,6 +4444,8 @@
+ _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ 	[Additional compiler flags for building library objects])
+ 
++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
++	[How to pass a linker flag through the compiler])
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -4170,6 +4466,7 @@
+ m4_defun([_LT_LINKER_SHLIBS],
+ [AC_REQUIRE([LT_PATH_LD])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -4178,27 +4475,35 @@
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ m4_if([$1], [CXX], [
+   _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+   case $host_os in
+   aix[[4-9]]*)
+     # If we're using GNU nm, then we don't want the "-C" option.
+     # -C means demangle to AIX nm, but means don't demangle with GNU nm
++    # Also, AIX nm treats weak defined symbols like other global defined
++    # symbols, whereas GNU nm marks them as "W".
+     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+     else
+       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+     fi
+     ;;
+   pw32*)
+     _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+-  ;;
++    ;;
+   cygwin* | mingw* | cegcc*)
+-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+-  ;;
++    case $cc_basename in
++    cl*) ;;
++    *)
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++      ;;
++    esac
++    ;;
+   *)
+     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+-  ;;
++    ;;
+   esac
+-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ ], [
+   runpath_var=
+   _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -4261,7 +4566,33 @@
+   esac
+ 
+   _LT_TAGVAR(ld_shlibs, $1)=yes
++
++  # On some targets, GNU ld is compatible enough with the native linker
++  # that we're better off using the native interface for both.
++  lt_use_gnu_ld_interface=no
+   if test "$with_gnu_ld" = yes; then
++    case $host_os in
++      aix*)
++	# The AIX port of GNU ld has always aspired to compatibility
++	# with the native linker.  However, as the warning in the GNU ld
++	# block says, versions before 2.19.5* couldn't really create working
++	# shared libraries, regardless of the interface used.
++	case `$LD -v 2>&1` in
++	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
++	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
++	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
++	  *)
++	    lt_use_gnu_ld_interface=yes
++	    ;;
++	esac
++	;;
++      *)
++	lt_use_gnu_ld_interface=yes
++	;;
++    esac
++  fi
++
++  if test "$lt_use_gnu_ld_interface" = yes; then
+     # If archive_cmds runs LD, not CC, wlarc should be empty
+     wlarc='${wl}'
+ 
+@@ -4279,6 +4610,7 @@
+     fi
+     supports_anon_versioning=no
+     case `$LD -v 2>&1` in
++      *GNU\ gold*) supports_anon_versioning=yes ;;
+       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+@@ -4294,11 +4626,12 @@
+ 	_LT_TAGVAR(ld_shlibs, $1)=no
+ 	cat <<_LT_EOF 1>&2
+ 
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** Warning: the GNU linker, at least up to release 2.19, is reported
+ *** to be unable to reliably create shared libraries on AIX.
+ *** Therefore, libtool is disabling shared libraries support.  If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
++*** really care for shared libraries, you may want to install binutils
++*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
++*** You will then need to restart the configuration process.
+ 
+ _LT_EOF
+       fi
+@@ -4334,10 +4667,12 @@
+       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+       # as there is no search path for DLLs.
+       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+       _LT_TAGVAR(always_export_symbols, $1)=no
+       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ 
+       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -4355,6 +4690,11 @@
+       fi
+       ;;
+ 
++    haiku*)
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      ;;
++
+     interix[[3-9]]*)
+       _LT_TAGVAR(hardcode_direct, $1)=no
+       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4370,7 +4710,7 @@
+       _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+       ;;
+ 
+-    gnu* | linux* | tpf* | k*bsd*-gnu)
++    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+       tmp_diet=no
+       if test "$host_os" = linux-dietlibc; then
+ 	case $cc_basename in
+@@ -4380,15 +4720,16 @@
+       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ 	 && test "$tmp_diet" = no
+       then
+-	tmp_addflag=
++	tmp_addflag=' $pic_flag'
+ 	tmp_sharedflag='-shared'
+ 	case $cc_basename,$host_cpu in
+         pgcc*)				# Portland Group C compiler
+-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ 	  tmp_addflag=' $pic_flag'
+ 	  ;;
+-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++	pgf77* | pgf90* | pgf95* | pgfortran*)
++					# Portland Group f77 and f90 compilers
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ 	  tmp_addflag=' $pic_flag -Mnomain' ;;
+ 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+ 	  tmp_addflag=' -i_dynamic' ;;
+@@ -4399,13 +4740,17 @@
+ 	lf95*)				# Lahey Fortran 8.1
+ 	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ 	  tmp_sharedflag='--shared' ;;
+-	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
++	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ 	  tmp_sharedflag='-qmkshrobj'
+ 	  tmp_addflag= ;;
++	nvcc*)	# Cuda Compiler Driver 2.2
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++	  _LT_TAGVAR(compiler_needs_object, $1)=yes
++	  ;;
+ 	esac
+ 	case `$CC -V 2>&1 | sed 5q` in
+ 	*Sun\ C*)			# Sun C 5.9
+-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+ 	  tmp_sharedflag='-G' ;;
+ 	*Sun\ F*)			# Sun Fortran 8.3
+@@ -4421,17 +4766,17 @@
+         fi
+ 
+ 	case $cc_basename in
+-	xlf*)
++	xlf* | bgf* | bgxlf* | mpixlf*)
+ 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ 	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ 	  if test "x$supports_anon_versioning" = xyes; then
+ 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ 	      echo "local: *; };" >> $output_objdir/$libname.ver~
+-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ 	  fi
+ 	  ;;
+ 	esac
+@@ -4445,8 +4790,8 @@
+ 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ 	wlarc=
+       else
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+       fi
+       ;;
+ 
+@@ -4464,8 +4809,8 @@
+ 
+ _LT_EOF
+       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+       else
+ 	_LT_TAGVAR(ld_shlibs, $1)=no
+       fi
+@@ -4511,8 +4856,8 @@
+ 
+     *)
+       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+       else
+ 	_LT_TAGVAR(ld_shlibs, $1)=no
+       fi
+@@ -4552,8 +4897,10 @@
+       else
+ 	# If we're using GNU nm, then we don't want the "-C" option.
+ 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
++	# Also, AIX nm treats weak defined symbols like other global
++	# defined symbols, whereas GNU nm marks them as "W".
+ 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ 	else
+ 	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ 	fi
+@@ -4640,9 +4987,9 @@
+ 	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+         # Determine the default libpath from the value encoded in an
+         # empty executable.
+-        _LT_SYS_MODULE_PATH_AIX
++        _LT_SYS_MODULE_PATH_AIX([$1])
+         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+ 	if test "$host_cpu" = ia64; then
+ 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -4651,14 +4998,19 @@
+ 	else
+ 	 # Determine the default libpath from the value encoded in an
+ 	 # empty executable.
+-	 _LT_SYS_MODULE_PATH_AIX
++	 _LT_SYS_MODULE_PATH_AIX([$1])
+ 	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ 	  # Warning - without using the other run time loading flags,
+ 	  # -berok will link without error, but may produce a broken library.
+ 	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ 	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+-	  # Exported symbols can be pulled into shared objects from archives
+-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++	  if test "$with_gnu_ld" = yes; then
++	    # We only use this code for GNU lds that support --whole-archive.
++	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++	  else
++	    # Exported symbols can be pulled into shared objects from archives
++	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++	  fi
+ 	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ 	  # This is similar to how AIX traditionally builds its shared libraries.
+ 	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+@@ -4690,20 +5042,63 @@
+       # Microsoft Visual C++.
+       # hardcode_libdir_flag_spec is actually meaningless, as there is
+       # no search path for DLLs.
+-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+-      # Tell ltmain to make .lib files, not .a files.
+-      libext=lib
+-      # Tell ltmain to make .dll files, not .so files.
+-      shrext_cmds=".dll"
+-      # FIXME: Setting linknames here is a bad hack.
+-      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+-      # The linker will automatically build a .lib file if we build a DLL.
+-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+-      # FIXME: Should let the user specify the lib program.
+-      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+-      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++      case $cc_basename in
++      cl*)
++	# Native MSVC
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	_LT_TAGVAR(always_export_symbols, $1)=yes
++	_LT_TAGVAR(file_list_spec, $1)='@'
++	# Tell ltmain to make .lib files, not .a files.
++	libext=lib
++	# Tell ltmain to make .dll files, not .so files.
++	shrext_cmds=".dll"
++	# FIXME: Setting linknames here is a bad hack.
++	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++	  else
++	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++	  fi~
++	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++	  linknames='
++	# The linker will not automatically build a static lib if we build a DLL.
++	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++	# Don't use ranlib
++	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++	  lt_tool_outputfile="@TOOL_OUTPUT@"~
++	  case $lt_outputfile in
++	    *.exe|*.EXE) ;;
++	    *)
++	      lt_outputfile="$lt_outputfile.exe"
++	      lt_tool_outputfile="$lt_tool_outputfile.exe"
++	      ;;
++	  esac~
++	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++	    $RM "$lt_outputfile.manifest";
++	  fi'
++	;;
++      *)
++	# Assume MSVC wrapper
++	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	# Tell ltmain to make .lib files, not .a files.
++	libext=lib
++	# Tell ltmain to make .dll files, not .so files.
++	shrext_cmds=".dll"
++	# FIXME: Setting linknames here is a bad hack.
++	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++	# The linker will automatically build a .lib file if we build a DLL.
++	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++	# FIXME: Should let the user specify the lib program.
++	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++	;;
++      esac
+       ;;
+ 
+     darwin* | rhapsody*)
+@@ -4741,7 +5136,7 @@
+ 
+     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+     freebsd* | dragonfly*)
+-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+       _LT_TAGVAR(hardcode_direct, $1)=yes
+       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4749,7 +5144,7 @@
+ 
+     hpux9*)
+       if test "$GCC" = yes; then
+-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+       else
+ 	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+       fi
+@@ -4764,8 +5159,8 @@
+       ;;
+ 
+     hpux10*)
+-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+       else
+ 	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+       fi
+@@ -4783,16 +5178,16 @@
+       ;;
+ 
+     hpux11*)
+-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ 	case $host_cpu in
+ 	hppa*64*)
+ 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ 	  ;;
+ 	ia64*)
+-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ 	  ;;
+ 	*)
+-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ 	  ;;
+ 	esac
+       else
+@@ -4804,7 +5199,14 @@
+ 	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ 	  ;;
+ 	*)
+-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	m4_if($1, [], [
++	  # Older versions of the 11.00 compiler do not understand -b yet
++	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
++	  _LT_LINKER_OPTION([if $CC understands -b],
++	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
++	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
++	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
++	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ 	  ;;
+ 	esac
+       fi
+@@ -4832,19 +5234,34 @@
+ 
+     irix5* | irix6* | nonstopux*)
+       if test "$GCC" = yes; then
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ 	# Try to use the -exported_symbol ld option, if it does not
+ 	# work, assume that -exports_file does not work either and
+ 	# implicitly export all symbols.
+-        save_LDFLAGS="$LDFLAGS"
+-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+-        AC_LINK_IFELSE(int foo(void) {},
+-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+-        )
+-        LDFLAGS="$save_LDFLAGS"
++	# This should be the same for all languages, so no per-tag cache variable.
++	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
++	  [lt_cv_irix_exported_symbol],
++	  [save_LDFLAGS="$LDFLAGS"
++	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++	   AC_LINK_IFELSE(
++	     [AC_LANG_SOURCE(
++	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
++			      [C++], [[int foo (void) { return 0; }]],
++			      [Fortran 77], [[
++      subroutine foo
++      end]],
++			      [Fortran], [[
++      subroutine foo
++      end]])])],
++	      [lt_cv_irix_exported_symbol=yes],
++	      [lt_cv_irix_exported_symbol=no])
++           LDFLAGS="$save_LDFLAGS"])
++	if test "$lt_cv_irix_exported_symbol" = yes; then
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++	fi
+       else
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+       fi
+       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -4906,17 +5323,17 @@
+       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+       _LT_TAGVAR(hardcode_minus_L, $1)=yes
+       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+       _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+       ;;
+ 
+     osf3*)
+       if test "$GCC" = yes; then
+ 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+       else
+ 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+       fi
+       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -4926,13 +5343,13 @@
+     osf4* | osf5*)	# as osf3* with the addition of -msym flag
+       if test "$GCC" = yes; then
+ 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+       else
+ 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ 	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ 
+ 	# Both c and cxx compiler support -rpath directly
+ 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -4945,9 +5362,9 @@
+       _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+       if test "$GCC" = yes; then
+ 	wlarc='${wl}'
+-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ 	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+       else
+ 	case `$CC -V 2>&1` in
+ 	*"Compilers 5.0"*)
+@@ -5123,36 +5540,38 @@
+       # Test whether the compiler implicitly links with -lc since on some
+       # systems, -lgcc has to come before -lc. If gcc already passes -lc
+       # to ld, don't add -lc before -lgcc.
+-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+-      $RM conftest*
+-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+-        soname=conftest
+-        lib=conftest
+-        libobjs=conftest.$ac_objext
+-        deplibs=
+-        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+-	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+-        compiler_flags=-v
+-        linker_flags=-v
+-        verstring=
+-        output_objdir=.
+-        libname=conftest
+-        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+-        _LT_TAGVAR(allow_undefined_flag, $1)=
+-        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+-        then
+-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+-        else
+-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+-        fi
+-        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+-      else
+-        cat conftest.err 1>&5
+-      fi
+-      $RM conftest*
+-      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
++      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
++	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
++	[$RM conftest*
++	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++	  soname=conftest
++	  lib=conftest
++	  libobjs=conftest.$ac_objext
++	  deplibs=
++	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
++	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
++	  compiler_flags=-v
++	  linker_flags=-v
++	  verstring=
++	  output_objdir=.
++	  libname=conftest
++	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
++	  _LT_TAGVAR(allow_undefined_flag, $1)=
++	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
++	  then
++	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++	  else
++	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++	  fi
++	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++	else
++	  cat conftest.err 1>&5
++	fi
++	$RM conftest*
++	])
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+       ;;
+     esac
+   fi
+@@ -5217,8 +5636,6 @@
+     to runtime path list])
+ _LT_TAGDECL([], [link_all_deplibs], [0],
+     [Whether libtool must link a program against all its dependency libraries])
+-_LT_TAGDECL([], [fix_srcfile_path], [1],
+-    [Fix the shell variable $srcfile for the compiler])
+ _LT_TAGDECL([], [always_export_symbols], [0],
+     [Set to "yes" if exported symbols are required])
+ _LT_TAGDECL([], [export_symbols_cmds], [2],
+@@ -5229,6 +5646,8 @@
+     [Symbols that must always be exported])
+ _LT_TAGDECL([], [prelink_cmds], [2],
+     [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [postlink_cmds], [2],
++    [Commands necessary for finishing linking programs])
+ _LT_TAGDECL([], [file_list_spec], [1],
+     [Specify filename containing input files])
+ dnl FIXME: Not yet implemented
+@@ -5322,37 +5741,22 @@
+ ])# _LT_LANG_C_CONFIG
+ 
+ 
+-# _LT_PROG_CXX
+-# ------------
+-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+-# compiler, we have our own version here.
+-m4_defun([_LT_PROG_CXX],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+-AC_PROG_CXX
+-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+-    (test "X$CXX" != "Xg++"))) ; then
+-  AC_PROG_CXXCPP
+-else
+-  _lt_caught_CXX_error=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_CXX
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_CXX], [])
+-
+-
+ # _LT_LANG_CXX_CONFIG([TAG])
+ # --------------------------
+ # Ensure that the configuration variables for a C++ compiler are suitably
+ # defined.  These variables are subsequently used by _LT_CONFIG to write
+ # the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_CXX_CONFIG],
+-[AC_REQUIRE([_LT_PROG_CXX])dnl
+-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++    (test "X$CXX" != "Xg++"))) ; then
++  AC_PROG_CXXCPP
++else
++  _lt_caught_CXX_error=yes
++fi
+ 
+ AC_LANG_PUSH(C++)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+@@ -5374,6 +5778,8 @@
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -5405,6 +5811,7 @@
+ 
+   # Allow CC to be a program name with arguments.
+   lt_save_CC=$CC
++  lt_save_CFLAGS=$CFLAGS
+   lt_save_LD=$LD
+   lt_save_GCC=$GCC
+   GCC=$GXX
+@@ -5422,6 +5829,7 @@
+   fi
+   test -z "${LDCXX+set}" || LD=$LDCXX
+   CC=${CXX-"c++"}
++  CFLAGS=$CXXFLAGS
+   compiler=$CC
+   _LT_TAGVAR(compiler, $1)=$CC
+   _LT_CC_BASENAME([$compiler])
+@@ -5443,8 +5851,8 @@
+       # Check if GNU C++ uses GNU ld as the underlying linker, since the
+       # archiving commands below assume that GNU ld is being used.
+       if test "$with_gnu_ld" = yes; then
+-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ 
+         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5476,7 +5884,7 @@
+       # Commands to make compiler produce verbose output that lists
+       # what "hidden" libraries, object files and flags are used when
+       # linking a shared library.
+-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ 
+     else
+       GXX=no
+@@ -5585,10 +5993,10 @@
+           _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+           # Determine the default libpath from the value encoded in an empty
+           # executable.
+-          _LT_SYS_MODULE_PATH_AIX
++          _LT_SYS_MODULE_PATH_AIX([$1])
+           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ 
+-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+         else
+           if test "$host_cpu" = ia64; then
+ 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+@@ -5597,14 +6005,19 @@
+           else
+ 	    # Determine the default libpath from the value encoded in an
+ 	    # empty executable.
+-	    _LT_SYS_MODULE_PATH_AIX
++	    _LT_SYS_MODULE_PATH_AIX([$1])
+ 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ 	    # Warning - without using the other run time loading flags,
+ 	    # -berok will link without error, but may produce a broken library.
+ 	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ 	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+-	    # Exported symbols can be pulled into shared objects from archives
+-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++	    if test "$with_gnu_ld" = yes; then
++	      # We only use this code for GNU lds that support --whole-archive.
++	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++	    else
++	      # Exported symbols can be pulled into shared objects from archives
++	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++	    fi
+ 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ 	    # This is similar to how AIX traditionally builds its shared
+ 	    # libraries.
+@@ -5634,28 +6047,75 @@
+         ;;
+ 
+       cygwin* | mingw* | pw32* | cegcc*)
+-        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+-        # as there is no search path for DLLs.
+-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+-        _LT_TAGVAR(always_export_symbols, $1)=no
+-        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+-
+-        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+-          # If the export-symbols file already is a .def file (1st line
+-          # is EXPORTS), use it as is; otherwise, prepend...
+-          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+-	    cp $export_symbols $output_objdir/$soname.def;
+-          else
+-	    echo EXPORTS > $output_objdir/$soname.def;
+-	    cat $export_symbols >> $output_objdir/$soname.def;
+-          fi~
+-          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+-        else
+-          _LT_TAGVAR(ld_shlibs, $1)=no
+-        fi
+-        ;;
++	case $GXX,$cc_basename in
++	,cl* | no,cl*)
++	  # Native MSVC
++	  # hardcode_libdir_flag_spec is actually meaningless, as there is
++	  # no search path for DLLs.
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	  _LT_TAGVAR(always_export_symbols, $1)=yes
++	  _LT_TAGVAR(file_list_spec, $1)='@'
++	  # Tell ltmain to make .lib files, not .a files.
++	  libext=lib
++	  # Tell ltmain to make .dll files, not .so files.
++	  shrext_cmds=".dll"
++	  # FIXME: Setting linknames here is a bad hack.
++	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++	    else
++	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++	    fi~
++	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++	    linknames='
++	  # The linker will not automatically build a static lib if we build a DLL.
++	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++	  # Don't use ranlib
++	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++	    lt_tool_outputfile="@TOOL_OUTPUT@"~
++	    case $lt_outputfile in
++	      *.exe|*.EXE) ;;
++	      *)
++		lt_outputfile="$lt_outputfile.exe"
++		lt_tool_outputfile="$lt_tool_outputfile.exe"
++		;;
++	    esac~
++	    func_to_tool_file "$lt_outputfile"~
++	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++	      $RM "$lt_outputfile.manifest";
++	    fi'
++	  ;;
++	*)
++	  # g++
++	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++	  # as there is no search path for DLLs.
++	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++	  _LT_TAGVAR(always_export_symbols, $1)=no
++	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	    # If the export-symbols file already is a .def file (1st line
++	    # is EXPORTS), use it as is; otherwise, prepend...
++	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	      cp $export_symbols $output_objdir/$soname.def;
++	    else
++	      echo EXPORTS > $output_objdir/$soname.def;
++	      cat $export_symbols >> $output_objdir/$soname.def;
++	    fi~
++	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	  else
++	    _LT_TAGVAR(ld_shlibs, $1)=no
++	  fi
++	  ;;
++	esac
++	;;
+       darwin* | rhapsody*)
+         _LT_DARWIN_LINKER_FEATURES($1)
+ 	;;
+@@ -5697,6 +6157,11 @@
+       gnu*)
+         ;;
+ 
++      haiku*)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++        _LT_TAGVAR(link_all_deplibs, $1)=yes
++        ;;
++
+       hpux9*)
+         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -5721,11 +6186,11 @@
+             # explicitly linking system object files so we need to strip them
+             # from the output so that they don't get included in the library
+             # dependencies.
+-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+             ;;
+           *)
+             if test "$GXX" = yes; then
+-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+             else
+               # FIXME: insert proper C++ library support
+               _LT_TAGVAR(ld_shlibs, $1)=no
+@@ -5786,7 +6251,7 @@
+ 	    # explicitly linking system object files so we need to strip them
+ 	    # from the output so that they don't get included in the library
+ 	    # dependencies.
+-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ 	    ;;
+           *)
+ 	    if test "$GXX" = yes; then
+@@ -5796,10 +6261,10 @@
+ 	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ 	            ;;
+ 	          ia64*)
+-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ 	            ;;
+ 	          *)
+-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ 	            ;;
+ 	        esac
+ 	      fi
+@@ -5829,7 +6294,7 @@
+         case $cc_basename in
+           CC*)
+ 	    # SGI C++
+-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ 
+ 	    # Archives containing C++ object files must be created using
+ 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+@@ -5840,9 +6305,9 @@
+           *)
+ 	    if test "$GXX" = yes; then
+ 	      if test "$with_gnu_ld" = no; then
+-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ 	      else
+-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ 	      fi
+ 	    fi
+ 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+@@ -5853,7 +6318,7 @@
+         _LT_TAGVAR(inherit_rpath, $1)=yes
+         ;;
+ 
+-      linux* | k*bsd*-gnu)
++      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+         case $cc_basename in
+           KCC*)
+ 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+@@ -5871,7 +6336,7 @@
+ 	    # explicitly linking system object files so we need to strip them
+ 	    # from the output so that they don't get included in the library
+ 	    # dependencies.
+-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ 
+ 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5908,26 +6373,26 @@
+           pgCC* | pgcpp*)
+             # Portland Group C++ compiler
+ 	    case `$CC -V` in
+-	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
++	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ 	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ 		rm -rf $tpldir~
+ 		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+-		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
++		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ 	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ 		rm -rf $tpldir~
+ 		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
++		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ 		$RANLIB $oldlib'
+ 	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ 		rm -rf $tpldir~
+ 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ 	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ 		rm -rf $tpldir~
+ 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ 	      ;;
+-	    *) # Version 6 will use weak symbols
++	    *) # Version 6 and above use weak symbols
+ 	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ 	      ;;
+@@ -5935,7 +6400,7 @@
+ 
+ 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+             ;;
+ 	  cxx*)
+ 	    # Compaq C++
+@@ -5954,9 +6419,9 @@
+ 	    # explicitly linking system object files so we need to strip them
+ 	    # from the output so that they don't get included in the library
+ 	    # dependencies.
+-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ 	    ;;
+-	  xl*)
++	  xl* | mpixl* | bgxl*)
+ 	    # IBM XL 8.0 on PPC, with GNU ld
+ 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5976,13 +6441,13 @@
+ 	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ 	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+ 
+ 	      # Not sure whether something based on
+ 	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ 	      # would be better.
+-	      output_verbose_link_cmd='echo'
++	      output_verbose_link_cmd='func_echo_all'
+ 
+ 	      # Archives containing C++ object files must be created using
+ 	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+@@ -6051,7 +6516,7 @@
+ 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ 	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ 	  fi
+-	  output_verbose_link_cmd=echo
++	  output_verbose_link_cmd=func_echo_all
+ 	else
+ 	  _LT_TAGVAR(ld_shlibs, $1)=no
+ 	fi
+@@ -6086,15 +6551,15 @@
+ 	    case $host in
+ 	      osf3*)
+ 	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ 		;;
+ 	      *)
+ 	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ 	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ 	          echo "-hidden">> $lib.exp~
+-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
++	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ 	          $RM $lib.exp'
+ 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ 		;;
+@@ -6110,17 +6575,17 @@
+ 	    # explicitly linking system object files so we need to strip them
+ 	    # from the output so that they don't get included in the library
+ 	    # dependencies.
+-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ 	    ;;
+ 	  *)
+ 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ 	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ 	      case $host in
+ 	        osf3*)
+-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ 		  ;;
+ 	        *)
+-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ 		  ;;
+ 	      esac
+ 
+@@ -6130,7 +6595,7 @@
+ 	      # Commands to make compiler produce verbose output that lists
+ 	      # what "hidden" libraries, object files and flags are used when
+ 	      # linking a shared library.
+-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ 
+ 	    else
+ 	      # FIXME: insert proper C++ library support
+@@ -6166,7 +6631,7 @@
+ 
+       solaris*)
+         case $cc_basename in
+-          CC*)
++          CC* | sunCC*)
+ 	    # Sun C++ 4.2, 5.x and Centerline C++
+             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ 	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+@@ -6187,7 +6652,7 @@
+ 	    esac
+ 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+ 
+-	    output_verbose_link_cmd='echo'
++	    output_verbose_link_cmd='func_echo_all'
+ 
+ 	    # Archives containing C++ object files must be created using
+ 	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+@@ -6207,14 +6672,14 @@
+ 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ 	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+-		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ 
+ 	        # Commands to make compiler produce verbose output that lists
+ 	        # what "hidden" libraries, object files and flags are used when
+ 	        # linking a shared library.
+-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ 	      else
+ 	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ 	        # platform.
+@@ -6225,7 +6690,7 @@
+ 	        # Commands to make compiler produce verbose output that lists
+ 	        # what "hidden" libraries, object files and flags are used when
+ 	        # linking a shared library.
+-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ 	      fi
+ 
+ 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+@@ -6279,6 +6744,10 @@
+           CC*)
+ 	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
++	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
++	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
++	      '"$_LT_TAGVAR(reload_cmds, $1)"
+ 	    ;;
+ 	  *)
+ 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+@@ -6334,6 +6803,7 @@
+   fi # test -n "$compiler"
+ 
+   CC=$lt_save_CC
++  CFLAGS=$lt_save_CFLAGS
+   LDCXX=$LD
+   LD=$lt_save_LD
+   GCC=$lt_save_GCC
+@@ -6348,6 +6818,29 @@
+ ])# _LT_LANG_CXX_CONFIG
+ 
+ 
++# _LT_FUNC_STRIPNAME_CNF
++# ----------------------
++# func_stripname_cnf prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++#
++# This function is identical to the (non-XSI) version of func_stripname,
++# except this one can be used by m4 code that may be executed by configure,
++# rather than the libtool script.
++m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
++AC_REQUIRE([_LT_DECL_SED])
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
++func_stripname_cnf ()
++{
++  case ${2} in
++  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++  esac
++} # func_stripname_cnf
++])# _LT_FUNC_STRIPNAME_CNF
++
+ # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+ # ---------------------------------
+ # Figure out "hidden" library dependencies from verbose
+@@ -6356,6 +6849,7 @@
+ # objects, libraries and library flags.
+ m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+ [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+ # Dependencies to place before and after the object being linked:
+ _LT_TAGVAR(predep_objects, $1)=
+ _LT_TAGVAR(postdep_objects, $1)=
+@@ -6406,6 +6900,13 @@
+ };
+ _LT_EOF
+ ])
++
++_lt_libdeps_save_CFLAGS=$CFLAGS
++case "$CC $CFLAGS " in #(
++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
++esac
++
+ dnl Parse the compiler output and extract the necessary
+ dnl objects, libraries and library flags.
+ if AC_TRY_EVAL(ac_compile); then
+@@ -6417,7 +6918,7 @@
+   pre_test_object_deps_done=no
+ 
+   for p in `eval "$output_verbose_link_cmd"`; do
+-    case $p in
++    case ${prev}${p} in
+ 
+     -L* | -R* | -l*)
+        # Some compilers place space between "-{L,R}" and the path.
+@@ -6426,13 +6927,22 @@
+           test $p = "-R"; then
+ 	 prev=$p
+ 	 continue
+-       else
+-	 prev=
+        fi
+ 
++       # Expand the sysroot to ease extracting the directories later.
++       if test -z "$prev"; then
++         case $p in
++         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
++         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
++         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
++         esac
++       fi
++       case $p in
++       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
++       esac
+        if test "$pre_test_object_deps_done" = no; then
+-	 case $p in
+-	 -L* | -R*)
++	 case ${prev} in
++	 -L | -R)
+ 	   # Internal compiler library paths should come after those
+ 	   # provided the user.  The postdeps already come after the
+ 	   # user supplied libs so there is no need to process them.
+@@ -6452,8 +6962,10 @@
+ 	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ 	 fi
+        fi
++       prev=
+        ;;
+ 
++    *.lto.$objext) ;; # Ignore GCC LTO objects
+     *.$objext)
+        # This assumes that the test object file only shows up
+        # once in the compiler output.
+@@ -6489,6 +7001,7 @@
+ fi
+ 
+ $RM -f confest.$objext
++CFLAGS=$_lt_libdeps_save_CFLAGS
+ 
+ # PORTME: override above test on systems where it is broken
+ m4_if([$1], [CXX],
+@@ -6525,7 +7038,7 @@
+ 
+ solaris*)
+   case $cc_basename in
+-  CC*)
++  CC* | sunCC*)
+     # The more standards-conforming stlport4 library is
+     # incompatible with the Cstd library. Avoid specifying
+     # it if it's in CXXFLAGS. Ignore libCrun as
+@@ -6569,32 +7082,16 @@
+ ])# _LT_SYS_HIDDEN_LIBDEPS
+ 
+ 
+-# _LT_PROG_F77
+-# ------------
+-# Since AC_PROG_F77 is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_F77],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+-AC_PROG_F77
+-if test -z "$F77" || test "X$F77" = "Xno"; then
+-  _lt_disable_F77=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_F77
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_F77], [])
+-
+-
+ # _LT_LANG_F77_CONFIG([TAG])
+ # --------------------------
+ # Ensure that the configuration variables for a Fortran 77 compiler are
+ # suitably defined.  These variables are subsequently used by _LT_CONFIG
+ # to write the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_F77_CONFIG],
+-[AC_REQUIRE([_LT_PROG_F77])dnl
+-AC_LANG_PUSH(Fortran 77)
++[AC_LANG_PUSH(Fortran 77)
++if test -z "$F77" || test "X$F77" = "Xno"; then
++  _lt_disable_F77=yes
++fi
+ 
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -6613,6 +7110,8 @@
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -6652,7 +7151,9 @@
+   # Allow CC to be a program name with arguments.
+   lt_save_CC="$CC"
+   lt_save_GCC=$GCC
++  lt_save_CFLAGS=$CFLAGS
+   CC=${F77-"f77"}
++  CFLAGS=$FFLAGS
+   compiler=$CC
+   _LT_TAGVAR(compiler, $1)=$CC
+   _LT_CC_BASENAME([$compiler])
+@@ -6706,38 +7207,24 @@
+ 
+   GCC=$lt_save_GCC
+   CC="$lt_save_CC"
++  CFLAGS="$lt_save_CFLAGS"
+ fi # test "$_lt_disable_F77" != yes
+ 
+ AC_LANG_POP
+ ])# _LT_LANG_F77_CONFIG
+ 
+ 
+-# _LT_PROG_FC
+-# -----------
+-# Since AC_PROG_FC is broken, in that it returns the empty string
+-# if there is no fortran compiler, we have our own version here.
+-m4_defun([_LT_PROG_FC],
+-[
+-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+-AC_PROG_FC
+-if test -z "$FC" || test "X$FC" = "Xno"; then
+-  _lt_disable_FC=yes
+-fi
+-popdef([AC_MSG_ERROR])
+-])# _LT_PROG_FC
+-
+-dnl aclocal-1.4 backwards compatibility:
+-dnl AC_DEFUN([_LT_PROG_FC], [])
+-
+-
+ # _LT_LANG_FC_CONFIG([TAG])
+ # -------------------------
+ # Ensure that the configuration variables for a Fortran compiler are
+ # suitably defined.  These variables are subsequently used by _LT_CONFIG
+ # to write the compiler configuration to `libtool'.
+ m4_defun([_LT_LANG_FC_CONFIG],
+-[AC_REQUIRE([_LT_PROG_FC])dnl
+-AC_LANG_PUSH(Fortran)
++[AC_LANG_PUSH(Fortran)
++
++if test -z "$FC" || test "X$FC" = "Xno"; then
++  _lt_disable_FC=yes
++fi
+ 
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -6756,6 +7243,8 @@
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ _LT_TAGVAR(no_undefined_flag, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+@@ -6795,7 +7284,9 @@
+   # Allow CC to be a program name with arguments.
+   lt_save_CC="$CC"
+   lt_save_GCC=$GCC
++  lt_save_CFLAGS=$CFLAGS
+   CC=${FC-"f95"}
++  CFLAGS=$FCFLAGS
+   compiler=$CC
+   GCC=$ac_cv_fc_compiler_gnu
+ 
+@@ -6851,7 +7342,8 @@
+   fi # test -n "$compiler"
+ 
+   GCC=$lt_save_GCC
+-  CC="$lt_save_CC"
++  CC=$lt_save_CC
++  CFLAGS=$lt_save_CFLAGS
+ fi # test "$_lt_disable_FC" != yes
+ 
+ AC_LANG_POP
+@@ -6888,10 +7380,12 @@
+ _LT_LINKER_BOILERPLATE
+ 
+ # Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=yes
+ CC=${GCJ-"gcj"}
++CFLAGS=$GCJFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_TAGVAR(LD, $1)="$LD"
+@@ -6901,6 +7395,8 @@
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ 
+ _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+ 
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+@@ -6920,7 +7416,8 @@
+ AC_LANG_RESTORE
+ 
+ GCC=$lt_save_GCC
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_GCJ_CONFIG
+ 
+ 
+@@ -6955,9 +7452,11 @@
+ 
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=
+ CC=${RC-"windres"}
++CFLAGS=
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -6970,7 +7469,8 @@
+ 
+ GCC=$lt_save_GCC
+ AC_LANG_RESTORE
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_RC_CONFIG
+ 
+ 
+@@ -7029,6 +7529,15 @@
+ AC_SUBST([OBJDUMP])
+ ])
+ 
++# _LT_DECL_DLLTOOL
++# ----------------
++# Ensure DLLTOOL variable is set.
++m4_defun([_LT_DECL_DLLTOOL],
++[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
++AC_SUBST([DLLTOOL])
++])
+ 
+ # _LT_DECL_SED
+ # ------------
+@@ -7122,8 +7631,8 @@
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+-      = c,a/b,, \
++  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++      = c,a/b,b/c, \
+     && eval 'test $(( 1 + 1 )) -eq 2 \
+     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+   && xsi_shell=yes
+@@ -7162,209 +7671,162 @@
+ ])# _LT_CHECK_SHELL_FEATURES
+ 
+ 
+-# _LT_PROG_XSI_SHELLFNS
+-# ---------------------
+-# Bourne and XSI compatible variants of some useful shell functions.
+-m4_defun([_LT_PROG_XSI_SHELLFNS],
+-[case $xsi_shell in
+-  yes)
+-    cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+-  case ${1} in
+-    */*) func_dirname_result="${1%/*}${2}" ;;
+-    *  ) func_dirname_result="${3}" ;;
+-  esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+-  func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-#   dirname:  Compute the dirname of FILE.  If nonempty,
+-#             add APPEND to the result, otherwise set result
+-#             to NONDIR_REPLACEMENT.
+-#             value returned in "$func_dirname_result"
+-#   basename: Compute filename of FILE.
+-#             value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+-  case ${1} in
+-    */*) func_dirname_result="${1%/*}${2}" ;;
+-    *  ) func_dirname_result="${3}" ;;
+-  esac
+-  func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+-  # positional parameters, so assign one to ordinary parameter first.
+-  func_stripname_result=${3}
+-  func_stripname_result=${func_stripname_result#"${1}"}
+-  func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+-  func_opt_split_opt=${1%%=*}
+-  func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+-  case ${1} in
+-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+-    *)    func_lo2o_result=${1} ;;
+-  esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+-  func_xform_result=${1%.*}.lo
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+-  func_arith_result=$(( $[*] ))
+-}
++# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
++# ------------------------------------------------------
++# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
++# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
++m4_defun([_LT_PROG_FUNCTION_REPLACE],
++[dnl {
++sed -e '/^$1 ()$/,/^} # $1 /c\
++$1 ()\
++{\
++m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
++} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
++  && mv -f "$cfgfile.tmp" "$cfgfile" \
++    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++])
+ 
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+-  func_len_result=${#1}
+-}
+ 
+-_LT_EOF
+-    ;;
+-  *) # Bourne compatible functions.
+-    cat << \_LT_EOF >> "$cfgfile"
++# _LT_PROG_REPLACE_SHELLFNS
++# -------------------------
++# Replace existing portable implementations of several shell functions with
++# equivalent extended shell implementations where those features are available..
++m4_defun([_LT_PROG_REPLACE_SHELLFNS],
++[if test x"$xsi_shell" = xyes; then
++  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
++    case ${1} in
++      */*) func_dirname_result="${1%/*}${2}" ;;
++      *  ) func_dirname_result="${3}" ;;
++    esac])
++
++  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
++    func_basename_result="${1##*/}"])
++
++  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
++    case ${1} in
++      */*) func_dirname_result="${1%/*}${2}" ;;
++      *  ) func_dirname_result="${3}" ;;
++    esac
++    func_basename_result="${1##*/}"])
+ 
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+-  # Extract subdirectory from the argument.
+-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+-  if test "X$func_dirname_result" = "X${1}"; then
+-    func_dirname_result="${3}"
+-  else
+-    func_dirname_result="$func_dirname_result${2}"
+-  fi
+-}
++  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
++    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++    # positional parameters, so assign one to ordinary parameter first.
++    func_stripname_result=${3}
++    func_stripname_result=${func_stripname_result#"${1}"}
++    func_stripname_result=${func_stripname_result%"${2}"}])
+ 
+-# func_basename file
+-func_basename ()
+-{
+-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+-}
++  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
++    func_split_long_opt_name=${1%%=*}
++    func_split_long_opt_arg=${1#*=}])
+ 
+-dnl func_dirname_and_basename
+-dnl A portable version of this function is already defined in general.m4sh
+-dnl so there is no need for it here.
++  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
++    func_split_short_opt_arg=${1#??}
++    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+ 
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+-  case ${2} in
+-    .*) func_stripname_result=`$ECHO "X${3}" \
+-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+-    *)  func_stripname_result=`$ECHO "X${3}" \
+-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+-  esac
+-}
++  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
++    case ${1} in
++      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++      *)    func_lo2o_result=${1} ;;
++    esac])
+ 
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[[^=]]*=//'
++  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
+ 
+-# func_opt_split
+-func_opt_split ()
+-{
+-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+-}
++  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
+ 
+-# func_lo2o object
+-func_lo2o ()
+-{
+-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+-}
++  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
++fi
+ 
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+-}
++if test x"$lt_shell_append" = xyes; then
++  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
+ 
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+-  func_arith_result=`expr "$[@]"`
+-}
++  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
++    func_quote_for_eval "${2}"
++dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
++    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+ 
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+-  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
++  # Save a `func_append' function call where possible by direct use of '+='
++  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++    && mv -f "$cfgfile.tmp" "$cfgfile" \
++      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++  test 0 -eq $? || _lt_function_replace_fail=:
++else
++  # Save a `func_append' function call even when '+=' is not available
++  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++    && mv -f "$cfgfile.tmp" "$cfgfile" \
++      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++  test 0 -eq $? || _lt_function_replace_fail=:
++fi
+ 
+-_LT_EOF
+-esac
++if test x"$_lt_function_replace_fail" = x":"; then
++  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
++fi
++])
+ 
+-case $lt_shell_append in
+-  yes)
+-    cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+-  eval "$[1]+=\$[2]"
+-}
+-_LT_EOF
++# _LT_PATH_CONVERSION_FUNCTIONS
++# -----------------------------
++# Determine which file name conversion functions should be used by
++# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
++# for certain cross-compile configurations and native mingw.
++m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_MSG_CHECKING([how to convert $build file names to $host format])
++AC_CACHE_VAL(lt_cv_to_host_file_cmd,
++[case $host in
++  *-*-mingw* )
++    case $build in
++      *-*-mingw* ) # actually msys
++        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++        ;;
++      *-*-cygwin* )
++        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++        ;;
++      * ) # otherwise, assume *nix
++        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++        ;;
++    esac
+     ;;
+-  *)
+-    cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+-  eval "$[1]=\$$[1]\$[2]"
+-}
+-
+-_LT_EOF
++  *-*-cygwin* )
++    case $build in
++      *-*-mingw* ) # actually msys
++        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++        ;;
++      *-*-cygwin* )
++        lt_cv_to_host_file_cmd=func_convert_file_noop
++        ;;
++      * ) # otherwise, assume *nix
++        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++        ;;
++    esac
+     ;;
+-  esac
++  * ) # unhandled hosts (and "normal" native builds)
++    lt_cv_to_host_file_cmd=func_convert_file_noop
++    ;;
++esac
+ ])
+-
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
++_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
++         [0], [convert $build file names to $host format])dnl
++
++AC_MSG_CHECKING([how to convert $build file names to toolchain format])
++AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
++[#assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++  *-*-mingw* )
++    case $build in
++      *-*-mingw* ) # actually msys
++        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++        ;;
++    esac
++    ;;
++esac
++])
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
++_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
++         [0], [convert $build files to toolchain format])dnl
++])# _LT_PATH_CONVERSION_FUNCTIONS
+diff -uNr SDL_ttf-2.0.10.orig//acinclude/ltoptions.m4 SDL_ttf-2.0.10/acinclude/ltoptions.m4
+--- SDL_ttf-2.0.10.orig//acinclude/ltoptions.m4	2009-10-13 01:06:37.000000000 +0200
++++ SDL_ttf-2.0.10/acinclude/ltoptions.m4	2010-10-13 14:53:29.000000000 +0200
+@@ -1,14 +1,14 @@
+-##############################################################################
+ # Helper functions for option handling.                    -*- Autoconf -*-
+ #
+-#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
++#   Inc.
+ #   Written by Gary V. Vaughan, 2004
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+ 
+-# serial 6 ltoptions.m4
++# serial 7 ltoptions.m4
+ 
+ # This is to help aclocal find these macros, as it can't see m4_define.
+ AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+@@ -126,7 +126,7 @@
+ [enable_win32_dll=yes
+ 
+ case $host in
+-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+   AC_CHECK_TOOL(AS, as, false)
+   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+   AC_CHECK_TOOL(OBJDUMP, objdump, false)
+@@ -134,13 +134,13 @@
+ esac
+ 
+ test -z "$AS" && AS=as
+-_LT_DECL([], [AS],      [0], [Assembler program])dnl
++_LT_DECL([], [AS],      [1], [Assembler program])dnl
+ 
+ test -z "$DLLTOOL" && DLLTOOL=dlltool
+-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+ 
+ test -z "$OBJDUMP" && OBJDUMP=objdump
+-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
++_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+ ])# win32-dll
+ 
+ AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+@@ -367,4 +367,3 @@
+ 		 [m4_define([_LTDL_TYPE], [installable])])
+ LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ 		 [m4_define([_LTDL_TYPE], [convenience])])
+-
+diff -uNr SDL_ttf-2.0.10.orig//acinclude/ltsugar.m4 SDL_ttf-2.0.10/acinclude/ltsugar.m4
+--- SDL_ttf-2.0.10.orig//acinclude/ltsugar.m4	2009-10-13 01:06:37.000000000 +0200
++++ SDL_ttf-2.0.10/acinclude/ltsugar.m4	2010-10-13 14:53:34.000000000 +0200
+@@ -1,4 +1,3 @@
+-##############################################################################
+ # ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+ #
+ # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+@@ -122,4 +121,3 @@
+            lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ 		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+ ])
+-
+diff -uNr SDL_ttf-2.0.10.orig//acinclude/ltversion.m4 SDL_ttf-2.0.10/acinclude/ltversion.m4
+--- SDL_ttf-2.0.10.orig//acinclude/ltversion.m4	2009-10-13 01:06:37.000000000 +0200
++++ SDL_ttf-2.0.10/acinclude/ltversion.m4	2010-10-13 14:53:06.000000000 +0200
+@@ -1,4 +1,3 @@
+-##############################################################################
+ # ltversion.m4 -- version numbers			-*- Autoconf -*-
+ #
+ #   Copyright (C) 2004 Free Software Foundation, Inc.
+@@ -8,18 +7,17 @@
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+ 
+-# Generated from ltversion.in.
++# @configure_input@
+ 
+-# serial 3012 ltversion.m4
++# serial 3293 ltversion.m4
+ # This file is part of GNU Libtool
+ 
+-m4_define([LT_PACKAGE_VERSION], [2.2.6])
+-m4_define([LT_PACKAGE_REVISION], [1.3012])
++m4_define([LT_PACKAGE_VERSION], [2.4])
++m4_define([LT_PACKAGE_REVISION], [1.3293])
+ 
+ AC_DEFUN([LTVERSION_VERSION],
+-[macro_version='2.2.6'
+-macro_revision='1.3012'
++[macro_version='2.4'
++macro_revision='1.3293'
+ _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+ _LT_DECL(, macro_revision, 0)
+ ])
+-
+diff -uNr SDL_ttf-2.0.10.orig//acinclude/lt~obsolete.m4 SDL_ttf-2.0.10/acinclude/lt~obsolete.m4
+--- SDL_ttf-2.0.10.orig//acinclude/lt~obsolete.m4	2009-10-13 01:06:37.000000000 +0200
++++ SDL_ttf-2.0.10/acinclude/lt~obsolete.m4	2010-10-13 14:53:40.000000000 +0200
+@@ -1,14 +1,13 @@
+-##############################################################################
+ # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+ #
+-#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
++#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+ #   Written by Scott James Remnant, 2004.
+ #
+ # This file is free software; the Free Software Foundation gives
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+ 
+-# serial 4 lt~obsolete.m4
++# serial 5 lt~obsolete.m4
+ 
+ # These exist entirely to fool aclocal when bootstrapping libtool.
+ #
+@@ -78,7 +77,6 @@
+ m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+ m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+ m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+-m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
+ m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+ m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+ m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+@@ -91,3 +89,10 @@
+ m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+ m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+ m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
++m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
++m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
++m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
++m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
++m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
++m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
+diff -uNr SDL_ttf-2.0.10.orig//ltmain.sh SDL_ttf-2.0.10/ltmain.sh
+--- SDL_ttf-2.0.10.orig//ltmain.sh	2009-10-13 01:06:38.000000000 +0200
++++ SDL_ttf-2.0.10/ltmain.sh	2010-10-13 14:51:20.000000000 +0200
+@@ -1,9 +1,9 @@
+-# Generated from ltmain.m4sh.
+ 
+-# ltmain.sh (GNU libtool) 2.2.6
++# libtool (GNU libtool) 2.4
+ # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+ 
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
++# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+ # This is free software; see the source for copying conditions.  There is NO
+ # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ 
+@@ -32,50 +32,56 @@
+ #
+ # Provide generalized library-building support services.
+ #
+-#     --config             show all configuration variables
+-#     --debug              enable verbose shell tracing
+-# -n, --dry-run            display commands without modifying any files
+-#     --features           display basic configuration information and exit
+-#     --mode=MODE          use operation mode MODE
+-#     --preserve-dup-deps  don't remove duplicate dependency libraries
+-#     --quiet, --silent    don't print informational messages
+-#     --tag=TAG            use configuration variables from tag TAG
+-# -v, --verbose            print informational messages (default)
+-#     --version            print version information
+-# -h, --help               print short or long help message
++#       --config             show all configuration variables
++#       --debug              enable verbose shell tracing
++#   -n, --dry-run            display commands without modifying any files
++#       --features           display basic configuration information and exit
++#       --mode=MODE          use operation mode MODE
++#       --preserve-dup-deps  don't remove duplicate dependency libraries
++#       --quiet, --silent    don't print informational messages
++#       --no-quiet, --no-silent
++#                            print informational messages (default)
++#       --tag=TAG            use configuration variables from tag TAG
++#   -v, --verbose            print more informational messages than default
++#       --no-verbose         don't print the extra informational messages
++#       --version            print version information
++#   -h, --help, --help-all   print short, long, or detailed help message
+ #
+ # MODE must be one of the following:
+ #
+-#       clean              remove files from the build directory
+-#       compile            compile a source file into a libtool object
+-#       execute            automatically set library path, then run a program
+-#       finish             complete the installation of libtool libraries
+-#       install            install libraries or executables
+-#       link               create a library or an executable
+-#       uninstall          remove libraries from an installed directory
++#         clean              remove files from the build directory
++#         compile            compile a source file into a libtool object
++#         execute            automatically set library path, then run a program
++#         finish             complete the installation of libtool libraries
++#         install            install libraries or executables
++#         link               create a library or an executable
++#         uninstall          remove libraries from an installed directory
+ #
+-# MODE-ARGS vary depending on the MODE.
++# MODE-ARGS vary depending on the MODE.  When passed as first option,
++# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+ # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+ #
+ # When reporting a bug, please describe a test case to reproduce it and
+ # include the following information:
+ #
+-#       host-triplet:	$host
+-#       shell:		$SHELL
+-#       compiler:		$LTCC
+-#       compiler flags:		$LTCFLAGS
+-#       linker:		$LD (gnu? $with_gnu_ld)
+-#       $progname:		(GNU libtool) 2.2.6
+-#       automake:		$automake_version
+-#       autoconf:		$autoconf_version
++#         host-triplet:	$host
++#         shell:		$SHELL
++#         compiler:		$LTCC
++#         compiler flags:		$LTCFLAGS
++#         linker:		$LD (gnu? $with_gnu_ld)
++#         $progname:	(GNU libtool) 2.4
++#         automake:	$automake_version
++#         autoconf:	$autoconf_version
+ #
+ # Report bugs to <bug-libtool@gnu.org>.
++# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
++# General help using GNU software: <http://www.gnu.org/gethelp/>.
+ 
+-PROGRAM=ltmain.sh
++PROGRAM=libtool
+ PACKAGE=libtool
+-VERSION=2.2.6
++VERSION=2.4
+ TIMESTAMP=""
+-package_revision=1.3012
++package_revision=1.3293
+ 
+ # Be Bourne compatible
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+@@ -91,10 +97,15 @@
+ BIN_SH=xpg4; export BIN_SH # for Tru64
+ DUALCASE=1; export DUALCASE # for MKS sh
+ 
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++$1
++_LTECHO_EOF'
++}
++
+ # NLS nuisances: We save the old values to restore during execute mode.
+-# Only set LANG and LC_ALL to C if already set.
+-# These must not be set unconditionally because not all systems understand
+-# e.g. LANG=C (notably SCO).
+ lt_user_locale=
+ lt_safe_locale=
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+@@ -107,24 +118,33 @@
+ 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ 	fi"
+ done
++LC_ALL=C
++LANGUAGE=C
++export LANGUAGE LC_ALL
+ 
+ $lt_unset CDPATH
+ 
+ 
++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
++# is ksh but when the shell is invoked as "sh" and the current value of
++# the _XPG environment variable is not equal to 1 (one), the special
++# positional parameter $0, within a function call, is the name of the
++# function.
++progpath="$0"
+ 
+ 
+ 
+ : ${CP="cp -f"}
+-: ${ECHO="echo"}
+-: ${EGREP="/usr/bin/grep -E"}
+-: ${FGREP="/usr/bin/grep -F"}
+-: ${GREP="/usr/bin/grep"}
++test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
++: ${EGREP="/bin/grep -E"}
++: ${FGREP="/bin/grep -F"}
++: ${GREP="/bin/grep"}
+ : ${LN_S="ln -s"}
+ : ${MAKE="make"}
+ : ${MKDIR="mkdir"}
+ : ${MV="mv -f"}
+ : ${RM="rm -f"}
+-: ${SED="/opt/local/bin/gsed"}
++: ${SED="/bin/sed"}
+ : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+ : ${Xsed="$SED -e 1s/^X//"}
+ 
+@@ -144,6 +164,27 @@
+ dirname="s,/[^/]*$,,"
+ basename="s,^.*/,,"
+ 
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
++    if test "X$func_dirname_result" = "X${1}"; then
++      func_dirname_result="${3}"
++    else
++      func_dirname_result="$func_dirname_result${2}"
++    fi
++} # func_dirname may be replaced by extended shell implementation
++
++
++# func_basename file
++func_basename ()
++{
++    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
++} # func_basename may be replaced by extended shell implementation
++
++
+ # func_dirname_and_basename file append nondir_replacement
+ # perform func_basename and func_dirname in a single function
+ # call:
+@@ -158,33 +199,183 @@
+ # those functions but instead duplicate the functionality here.
+ func_dirname_and_basename ()
+ {
+-  # Extract subdirectory from the argument.
+-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+-  if test "X$func_dirname_result" = "X${1}"; then
+-    func_dirname_result="${3}"
+-  else
+-    func_dirname_result="$func_dirname_result${2}"
+-  fi
+-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
++    # Extract subdirectory from the argument.
++    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
++    if test "X$func_dirname_result" = "X${1}"; then
++      func_dirname_result="${3}"
++    else
++      func_dirname_result="$func_dirname_result${2}"
++    fi
++    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
++} # func_dirname_and_basename may be replaced by extended shell implementation
++
++
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++# func_strip_suffix prefix name
++func_stripname ()
++{
++    case ${2} in
++      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++    esac
++} # func_stripname may be replaced by extended shell implementation
++
++
++# These SED scripts presuppose an absolute path with a trailing slash.
++pathcar='s,^/\([^/]*\).*$,\1,'
++pathcdr='s,^/[^/]*,,'
++removedotparts=':dotsl
++		s@/\./@/@g
++		t dotsl
++		s,/\.$,/,'
++collapseslashes='s@/\{1,\}@/@g'
++finalslash='s,/*$,/,'
++
++# func_normal_abspath PATH
++# Remove doubled-up and trailing slashes, "." path components,
++# and cancel out any ".." path components in PATH after making
++# it an absolute path.
++#             value returned in "$func_normal_abspath_result"
++func_normal_abspath ()
++{
++  # Start from root dir and reassemble the path.
++  func_normal_abspath_result=
++  func_normal_abspath_tpath=$1
++  func_normal_abspath_altnamespace=
++  case $func_normal_abspath_tpath in
++    "")
++      # Empty path, that just means $cwd.
++      func_stripname '' '/' "`pwd`"
++      func_normal_abspath_result=$func_stripname_result
++      return
++    ;;
++    # The next three entries are used to spot a run of precisely
++    # two leading slashes without using negated character classes;
++    # we take advantage of case's first-match behaviour.
++    ///*)
++      # Unusual form of absolute path, do nothing.
++    ;;
++    //*)
++      # Not necessarily an ordinary path; POSIX reserves leading '//'
++      # and for example Cygwin uses it to access remote file shares
++      # over CIFS/SMB, so we conserve a leading double slash if found.
++      func_normal_abspath_altnamespace=/
++    ;;
++    /*)
++      # Absolute path, do nothing.
++    ;;
++    *)
++      # Relative path, prepend $cwd.
++      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
++    ;;
++  esac
++  # Cancel out all the simple stuff to save iterations.  We also want
++  # the path to end with a slash for ease of parsing, so make sure
++  # there is one (and only one) here.
++  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
++  while :; do
++    # Processed it all yet?
++    if test "$func_normal_abspath_tpath" = / ; then
++      # If we ascended to the root using ".." the result may be empty now.
++      if test -z "$func_normal_abspath_result" ; then
++        func_normal_abspath_result=/
++      fi
++      break
++    fi
++    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$pathcar"`
++    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$pathcdr"`
++    # Figure out what to do with it
++    case $func_normal_abspath_tcomponent in
++      "")
++        # Trailing empty path component, ignore it.
++      ;;
++      ..)
++        # Parent dir; strip last assembled component from result.
++        func_dirname "$func_normal_abspath_result"
++        func_normal_abspath_result=$func_dirname_result
++      ;;
++      *)
++        # Actual path component, append it.
++        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
++      ;;
++    esac
++  done
++  # Restore leading double-slash if one was found on entry.
++  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+ }
+ 
+-# Generated shell functions inserted here.
++# func_relative_path SRCDIR DSTDIR
++# generates a relative path from SRCDIR to DSTDIR, with a trailing
++# slash if non-empty, suitable for immediately appending a filename
++# without needing to append a separator.
++#             value returned in "$func_relative_path_result"
++func_relative_path ()
++{
++  func_relative_path_result=
++  func_normal_abspath "$1"
++  func_relative_path_tlibdir=$func_normal_abspath_result
++  func_normal_abspath "$2"
++  func_relative_path_tbindir=$func_normal_abspath_result
++
++  # Ascend the tree starting from libdir
++  while :; do
++    # check if we have found a prefix of bindir
++    case $func_relative_path_tbindir in
++      $func_relative_path_tlibdir)
++        # found an exact match
++        func_relative_path_tcancelled=
++        break
++        ;;
++      $func_relative_path_tlibdir*)
++        # found a matching prefix
++        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
++        func_relative_path_tcancelled=$func_stripname_result
++        if test -z "$func_relative_path_result"; then
++          func_relative_path_result=.
++        fi
++        break
++        ;;
++      *)
++        func_dirname $func_relative_path_tlibdir
++        func_relative_path_tlibdir=${func_dirname_result}
++        if test "x$func_relative_path_tlibdir" = x ; then
++          # Have to descend all the way to the root!
++          func_relative_path_result=../$func_relative_path_result
++          func_relative_path_tcancelled=$func_relative_path_tbindir
++          break
++        fi
++        func_relative_path_result=../$func_relative_path_result
++        ;;
++    esac
++  done
++
++  # Now calculate path; take care to avoid doubling-up slashes.
++  func_stripname '' '/' "$func_relative_path_result"
++  func_relative_path_result=$func_stripname_result
++  func_stripname '/' '/' "$func_relative_path_tcancelled"
++  if test "x$func_stripname_result" != x ; then
++    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
++  fi
+ 
+-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+-# is ksh but when the shell is invoked as "sh" and the current value of
+-# the _XPG environment variable is not equal to 1 (one), the special
+-# positional parameter $0, within a function call, is the name of the
+-# function.
+-progpath="$0"
++  # Normalisation. If bindir is libdir, return empty string,
++  # else relative path ending with a slash; either way, target
++  # file name can be directly appended.
++  if test ! -z "$func_relative_path_result"; then
++    func_stripname './' '' "$func_relative_path_result/"
++    func_relative_path_result=$func_stripname_result
++  fi
++}
+ 
+ # The name of this program:
+-# In the unlikely event $progname began with a '-', it would play havoc with
+-# func_echo (imagine progname=-n), so we prepend ./ in that case:
+ func_dirname_and_basename "$progpath"
+ progname=$func_basename_result
+-case $progname in
+-  -*) progname=./$progname ;;
+-esac
+ 
+ # Make sure we have an absolute path for reexecution:
+ case $progpath in
+@@ -215,6 +406,15 @@
+ # Same as above, but do not quote variable references.
+ double_quote_subst='s/\(["`\\]\)/\\\1/g'
+ 
++# Sed substitution that turns a string into a regex matching for the
++# string literally.
++sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
++
++# Sed substitution that converts a w32 file name or path
++# which contains forward slashes, into one that contains
++# (escaped) backslashes.  A very naive implementation.
++lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
++
+ # Re-`\' parameter expansions in output of double_quote_subst that were
+ # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+ # in input to double_quote_subst, that '$' was protected from expansion.
+@@ -243,7 +443,7 @@
+ # name if it has been set yet.
+ func_echo ()
+ {
+-    $ECHO "$progname${mode+: }$mode: $*"
++    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+ }
+ 
+ # func_verbose arg...
+@@ -258,18 +458,25 @@
+     :
+ }
+ 
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++    $ECHO "$*"
++}
++
+ # func_error arg...
+ # Echo program name prefixed message to standard error.
+ func_error ()
+ {
+-    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
++    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+ }
+ 
+ # func_warning arg...
+ # Echo program name prefixed warning message to standard error.
+ func_warning ()
+ {
+-    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
++    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+ 
+     # bash bug again:
+     :
+@@ -326,9 +533,9 @@
+         case $my_directory_path in */*) ;; *) break ;; esac
+ 
+         # ...otherwise throw away the child directory and loop
+-        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
++        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+       done
+-      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
++      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+ 
+       save_mkdir_p_IFS="$IFS"; IFS=':'
+       for my_dir in $my_dir_list; do
+@@ -378,7 +585,7 @@
+         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+     fi
+ 
+-    $ECHO "X$my_tmpdir" | $Xsed
++    $ECHO "$my_tmpdir"
+ }
+ 
+ 
+@@ -392,7 +599,7 @@
+ {
+     case $1 in
+       *[\\\`\"\$]*)
+-	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
++	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+       *)
+         func_quote_for_eval_unquoted_result="$1" ;;
+     esac
+@@ -419,7 +626,7 @@
+ {
+     case $1 in
+       *[\\\`\"]*)
+-	my_arg=`$ECHO "X$1" | $Xsed \
++	my_arg=`$ECHO "$1" | $SED \
+ 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+       *)
+         my_arg="$1" ;;
+@@ -488,15 +695,39 @@
+     fi
+ }
+ 
+-
+-
++# func_tr_sh
++# Turn $1 into a string suitable for a shell variable name.
++# Result is stored in $func_tr_sh_result.  All characters
++# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
++# if $1 begins with a digit, a '_' is prepended as well.
++func_tr_sh ()
++{
++  case $1 in
++  [0-9]* | *[!a-zA-Z0-9_]*)
++    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
++    ;;
++  * )
++    func_tr_sh_result=$1
++    ;;
++  esac
++}
+ 
+ 
+ # func_version
+ # Echo version message to standard output and exit.
+ func_version ()
+ {
+-    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
++    $opt_debug
++
++    $SED -n '/(C)/!b go
++	:more
++	/\./!{
++	  N
++	  s/\n# / /
++	  b more
++	}
++	:go
++	/^# '$PROGRAM' (GNU /,/# warranty; / {
+         s/^# //
+ 	s/^# *$//
+         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+@@ -509,22 +740,28 @@
+ # Echo short help message to standard output and exit.
+ func_usage ()
+ {
+-    $SED -n '/^# Usage:/,/# -h/ {
++    $opt_debug
++
++    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+         s/^# //
+ 	s/^# *$//
+ 	s/\$progname/'$progname'/
+ 	p
+     }' < "$progpath"
+-    $ECHO
++    echo
+     $ECHO "run \`$progname --help | more' for full usage"
+     exit $?
+ }
+ 
+-# func_help
+-# Echo long help message to standard output and exit.
++# func_help [NOEXIT]
++# Echo long help message to standard output and exit,
++# unless 'noexit' is passed as argument.
+ func_help ()
+ {
++    $opt_debug
++
+     $SED -n '/^# Usage:/,/# Report bugs to/ {
++	:print
+         s/^# //
+ 	s/^# *$//
+ 	s*\$progname*'$progname'*
+@@ -537,8 +774,15 @@
+ 	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ 	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ 	p
+-     }' < "$progpath"
+-    exit $?
++	d
++     }
++     /^# .* home page:/b print
++     /^# General help using/b print
++     ' < "$progpath"
++    ret=$?
++    if test -z "$1"; then
++      exit $ret
++    fi
+ }
+ 
+ # func_missing_arg argname
+@@ -546,63 +790,106 @@
+ # exit_cmd.
+ func_missing_arg ()
+ {
+-    func_error "missing argument for $1"
++    $opt_debug
++
++    func_error "missing argument for $1."
+     exit_cmd=exit
+ }
+ 
+-exit_cmd=:
+ 
++# func_split_short_opt shortopt
++# Set func_split_short_opt_name and func_split_short_opt_arg shell
++# variables after splitting SHORTOPT after the 2nd character.
++func_split_short_opt ()
++{
++    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
++    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
++
++    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
++    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
++} # func_split_short_opt may be replaced by extended shell implementation
++
++
++# func_split_long_opt longopt
++# Set func_split_long_opt_name and func_split_long_opt_arg shell
++# variables after splitting LONGOPT at the `=' sign.
++func_split_long_opt ()
++{
++    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
++    my_sed_long_arg='1s/^--[^=]*=//'
++
++    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
++    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
++} # func_split_long_opt may be replaced by extended shell implementation
+ 
++exit_cmd=:
+ 
+ 
+ 
+-# Check that we have a working $ECHO.
+-if test "X$1" = X--no-reexec; then
+-  # Discard the --no-reexec flag, and continue.
+-  shift
+-elif test "X$1" = X--fallback-echo; then
+-  # Avoid inline document here, it may be left over
+-  :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+-  # Yippee, $ECHO works!
+-  :
+-else
+-  # Restart under the correct shell, and then maybe $ECHO will work.
+-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+-fi
+ 
+-if test "X$1" = X--fallback-echo; then
+-  # used as fallback echo
+-  shift
+-  cat <<EOF
+-$*
+-EOF
+-  exit $EXIT_SUCCESS
+-fi
+ 
+ magic="%%%MAGIC variable%%%"
+ magic_exe="%%%MAGIC EXE variable%%%"
+ 
+ # Global variables.
+-# $mode is unset
+ nonopt=
+-execute_dlfiles=
+ preserve_args=
+ lo2o="s/\\.lo\$/.${objext}/"
+ o2lo="s/\\.${objext}\$/.lo/"
+ extracted_archives=
+ extracted_serial=0
+ 
+-opt_dry_run=false
+-opt_duplicate_deps=false
+-opt_silent=false
+-opt_debug=:
+-
+ # If this variable is set in any of the actions, the command in it
+ # will be execed at the end.  This prevents here-documents from being
+ # left over by shells.
+ exec_cmd=
+ 
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++    eval "${1}=\$${1}\${2}"
++} # func_append may be replaced by extended shell implementation
++
++# func_append_quoted var value
++# Quote VALUE and append to the end of shell variable VAR, separated
++# by a space.
++func_append_quoted ()
++{
++    func_quote_for_eval "${2}"
++    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
++} # func_append_quoted may be replaced by extended shell implementation
++
++
++# func_arith arithmetic-term...
++func_arith ()
++{
++    func_arith_result=`expr "${@}"`
++} # func_arith may be replaced by extended shell implementation
++
++
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
++} # func_len may be replaced by extended shell implementation
++
++
++# func_lo2o object
++func_lo2o ()
++{
++    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
++} # func_lo2o may be replaced by extended shell implementation
++
++
++# func_xform libobj-or-source
++func_xform ()
++{
++    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
++} # func_xform may be replaced by extended shell implementation
++
++
+ # func_fatal_configuration arg...
+ # Echo program name prefixed message to standard error, followed by
+ # a configuration failure hint, and exit.
+@@ -636,16 +923,16 @@
+ # Display the features supported by this script.
+ func_features ()
+ {
+-    $ECHO "host: $host"
++    echo "host: $host"
+     if test "$build_libtool_libs" = yes; then
+-      $ECHO "enable shared libraries"
++      echo "enable shared libraries"
+     else
+-      $ECHO "disable shared libraries"
++      echo "disable shared libraries"
+     fi
+     if test "$build_old_libs" = yes; then
+-      $ECHO "enable static libraries"
++      echo "enable static libraries"
+     else
+-      $ECHO "disable static libraries"
++      echo "disable static libraries"
+     fi
+ 
+     exit $?
+@@ -692,117 +979,204 @@
+   esac
+ }
+ 
+-# Parse options once, thoroughly.  This comes as soon as possible in
+-# the script to make things like `libtool --version' happen quickly.
++# func_check_version_match
++# Ensure that we are using m4 macros, and libtool script from the same
++# release of libtool.
++func_check_version_match ()
+ {
++  if test "$package_revision" != "$macro_revision"; then
++    if test "$VERSION" != "$macro_version"; then
++      if test -z "$macro_version"; then
++        cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from an older release.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++      else
++        cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++      fi
++    else
++      cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
++$progname: but the definition of this LT_INIT comes from revision $macro_revision.
++$progname: You should recreate aclocal.m4 with macros from revision $package_revision
++$progname: of $PACKAGE $VERSION and run autoconf again.
++_LT_EOF
++    fi
++
++    exit $EXIT_MISMATCH
++  fi
++}
++
++
++# Shorthand for --mode=foo, only valid as the first argument
++case $1 in
++clean|clea|cle|cl)
++  shift; set dummy --mode clean ${1+"$@"}; shift
++  ;;
++compile|compil|compi|comp|com|co|c)
++  shift; set dummy --mode compile ${1+"$@"}; shift
++  ;;
++execute|execut|execu|exec|exe|ex|e)
++  shift; set dummy --mode execute ${1+"$@"}; shift
++  ;;
++finish|finis|fini|fin|fi|f)
++  shift; set dummy --mode finish ${1+"$@"}; shift
++  ;;
++install|instal|insta|inst|ins|in|i)
++  shift; set dummy --mode install ${1+"$@"}; shift
++  ;;
++link|lin|li|l)
++  shift; set dummy --mode link ${1+"$@"}; shift
++  ;;
++uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
++  shift; set dummy --mode uninstall ${1+"$@"}; shift
++  ;;
++esac
+ 
+-  # Shorthand for --mode=foo, only valid as the first argument
+-  case $1 in
+-  clean|clea|cle|cl)
+-    shift; set dummy --mode clean ${1+"$@"}; shift
+-    ;;
+-  compile|compil|compi|comp|com|co|c)
+-    shift; set dummy --mode compile ${1+"$@"}; shift
+-    ;;
+-  execute|execut|execu|exec|exe|ex|e)
+-    shift; set dummy --mode execute ${1+"$@"}; shift
+-    ;;
+-  finish|finis|fini|fin|fi|f)
+-    shift; set dummy --mode finish ${1+"$@"}; shift
+-    ;;
+-  install|instal|insta|inst|ins|in|i)
+-    shift; set dummy --mode install ${1+"$@"}; shift
+-    ;;
+-  link|lin|li|l)
+-    shift; set dummy --mode link ${1+"$@"}; shift
+-    ;;
+-  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+-    shift; set dummy --mode uninstall ${1+"$@"}; shift
+-    ;;
+-  esac
+ 
+-  # Parse non-mode specific arguments:
+-  while test "$#" -gt 0; do
++
++# Option defaults:
++opt_debug=:
++opt_dry_run=false
++opt_config=false
++opt_preserve_dup_deps=false
++opt_features=false
++opt_finish=false
++opt_help=false
++opt_help_all=false
++opt_silent=:
++opt_verbose=:
++opt_silent=false
++opt_verbose=false
++
++
++# Parse options once, thoroughly.  This comes as soon as possible in the
++# script to make things like `--version' happen as quickly as we can.
++{
++  # this just eases exit handling
++  while test $# -gt 0; do
+     opt="$1"
+     shift
+-
+     case $opt in
+-      --config)		func_config					;;
+-
+-      --debug)		preserve_args="$preserve_args $opt"
++      --debug|-x)	opt_debug='set -x'
+ 			func_echo "enabling shell trace mode"
+-			opt_debug='set -x'
+ 			$opt_debug
+ 			;;
+-
+-      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+-			execute_dlfiles="$execute_dlfiles $1"
+-			shift
++      --dry-run|--dryrun|-n)
++			opt_dry_run=:
+ 			;;
+-
+-      --dry-run | -n)	opt_dry_run=:					;;
+-      --features)       func_features					;;
+-      --finish)		mode="finish"					;;
+-
+-      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+-			case $1 in
+-			  # Valid mode arguments:
+-			  clean)	;;
+-			  compile)	;;
+-			  execute)	;;
+-			  finish)	;;
+-			  install)	;;
+-			  link)		;;
+-			  relink)	;;
+-			  uninstall)	;;
+-
+-			  # Catch anything else as an error
+-			  *) func_error "invalid argument for $opt"
+-			     exit_cmd=exit
+-			     break
+-			     ;;
+-		        esac
+-
+-			mode="$1"
++      --config)
++			opt_config=:
++func_config
++			;;
++      --dlopen|-dlopen)
++			optarg="$1"
++			opt_dlopen="${opt_dlopen+$opt_dlopen
++}$optarg"
+ 			shift
+ 			;;
+-
+       --preserve-dup-deps)
+-			opt_duplicate_deps=:				;;
+-
+-      --quiet|--silent)	preserve_args="$preserve_args $opt"
+-			opt_silent=:
++			opt_preserve_dup_deps=:
+ 			;;
+-
+-      --verbose| -v)	preserve_args="$preserve_args $opt"
++      --features)
++			opt_features=:
++func_features
++			;;
++      --finish)
++			opt_finish=:
++set dummy --mode finish ${1+"$@"}; shift
++			;;
++      --help)
++			opt_help=:
++			;;
++      --help-all)
++			opt_help_all=:
++opt_help=': help-all'
++			;;
++      --mode)
++			test $# = 0 && func_missing_arg $opt && break
++			optarg="$1"
++			opt_mode="$optarg"
++case $optarg in
++  # Valid mode arguments:
++  clean|compile|execute|finish|install|link|relink|uninstall) ;;
++
++  # Catch anything else as an error
++  *) func_error "invalid argument for $opt"
++     exit_cmd=exit
++     break
++     ;;
++esac
++			shift
++			;;
++      --no-silent|--no-quiet)
+ 			opt_silent=false
++func_append preserve_args " $opt"
+ 			;;
+-
+-      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+-			preserve_args="$preserve_args $opt $1"
+-			func_enable_tag "$1"	# tagname is set here
++      --no-verbose)
++			opt_verbose=false
++func_append preserve_args " $opt"
++			;;
++      --silent|--quiet)
++			opt_silent=:
++func_append preserve_args " $opt"
++        opt_verbose=false
++			;;
++      --verbose|-v)
++			opt_verbose=:
++func_append preserve_args " $opt"
++opt_silent=false
++			;;
++      --tag)
++			test $# = 0 && func_missing_arg $opt && break
++			optarg="$1"
++			opt_tag="$optarg"
++func_append preserve_args " $opt $optarg"
++func_enable_tag "$optarg"
+ 			shift
+ 			;;
+ 
++      -\?|-h)		func_usage				;;
++      --help)		func_help				;;
++      --version)	func_version				;;
++
+       # Separate optargs to long options:
+-      -dlopen=*|--mode=*|--tag=*)
+-			func_opt_split "$opt"
+-			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
++      --*=*)
++			func_split_long_opt "$opt"
++			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ 			shift
+ 			;;
+ 
+-      -\?|-h)		func_usage					;;
+-      --help)		opt_help=:					;;
+-      --version)	func_version					;;
+-
+-      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
+-
+-      *)		nonopt="$opt"
+-			break
++      # Separate non-argument short options:
++      -\?*|-h*|-n*|-v*)
++			func_split_short_opt "$opt"
++			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
++			shift
+ 			;;
++
++      --)		break					;;
++      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
++      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+     esac
+   done
+ 
++  # Validate options:
++
++  # save first non-option argument
++  if test "$#" -gt 0; then
++    nonopt="$opt"
++    shift
++  fi
++
++  # preserve --debug
++  test "$opt_debug" = : || func_append preserve_args " --debug"
+ 
+   case $host in
+     *cygwin* | *mingw* | *pw32* | *cegcc*)
+@@ -810,82 +1184,44 @@
+       opt_duplicate_compiler_generated_deps=:
+       ;;
+     *)
+-      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
++      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+       ;;
+   esac
+ 
+-  # Having warned about all mis-specified options, bail out if
+-  # anything was wrong.
+-  $exit_cmd $EXIT_FAILURE
+-}
++  $opt_help || {
++    # Sanity checks first:
++    func_check_version_match
+ 
+-# func_check_version_match
+-# Ensure that we are using m4 macros, and libtool script from the same
+-# release of libtool.
+-func_check_version_match ()
+-{
+-  if test "$package_revision" != "$macro_revision"; then
+-    if test "$VERSION" != "$macro_version"; then
+-      if test -z "$macro_version"; then
+-        cat >&2 <<_LT_EOF
+-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+-$progname: definition of this LT_INIT comes from an older release.
+-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+-$progname: and run autoconf again.
+-_LT_EOF
+-      else
+-        cat >&2 <<_LT_EOF
+-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+-$progname: and run autoconf again.
+-_LT_EOF
+-      fi
+-    else
+-      cat >&2 <<_LT_EOF
+-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+-$progname: of $PACKAGE $VERSION and run autoconf again.
+-_LT_EOF
++    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++      func_fatal_configuration "not configured to build any kind of library"
+     fi
+ 
+-    exit $EXIT_MISMATCH
+-  fi
+-}
+-
++    # Darwin sucks
++    eval std_shrext=\"$shrext_cmds\"
+ 
+-## ----------- ##
+-##    Main.    ##
+-## ----------- ##
+-
+-$opt_help || {
+-  # Sanity checks first:
+-  func_check_version_match
+-
+-  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+-    func_fatal_configuration "not configured to build any kind of library"
+-  fi
++    # Only execute mode is allowed to have -dlopen flags.
++    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
++      func_error "unrecognized option \`-dlopen'"
++      $ECHO "$help" 1>&2
++      exit $EXIT_FAILURE
++    fi
+ 
+-  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
++    # Change the help message to a mode-specific one.
++    generic_help="$help"
++    help="Try \`$progname --help --mode=$opt_mode' for more information."
++  }
+ 
+ 
+-  # Darwin sucks
+-  eval std_shrext=\"$shrext_cmds\"
++  # Bail if the options were screwed
++  $exit_cmd $EXIT_FAILURE
++}
+ 
+ 
+-  # Only execute mode is allowed to have -dlopen flags.
+-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+-    func_error "unrecognized option \`-dlopen'"
+-    $ECHO "$help" 1>&2
+-    exit $EXIT_FAILURE
+-  fi
+ 
+-  # Change the help message to a mode-specific one.
+-  generic_help="$help"
+-  help="Try \`$progname --help --mode=$mode' for more information."
+-}
+ 
++## ----------- ##
++##    Main.    ##
++## ----------- ##
+ 
+ # func_lalib_p file
+ # True iff FILE is a libtool `.la' library or `.lo' object file.
+@@ -950,12 +1286,9 @@
+ # temporary ltwrapper_script.
+ func_ltwrapper_scriptname ()
+ {
+-    func_ltwrapper_scriptname_result=""
+-    if func_ltwrapper_executable_p "$1"; then
+-	func_dirname_and_basename "$1" "" "."
+-	func_stripname '' '.exe' "$func_basename_result"
+-	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+-    fi
++    func_dirname_and_basename "$1" "" "."
++    func_stripname '' '.exe' "$func_basename_result"
++    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ }
+ 
+ # func_ltwrapper_p file
+@@ -1001,6 +1334,37 @@
+ }
+ 
+ 
++# func_resolve_sysroot PATH
++# Replace a leading = in PATH with a sysroot.  Store the result into
++# func_resolve_sysroot_result
++func_resolve_sysroot ()
++{
++  func_resolve_sysroot_result=$1
++  case $func_resolve_sysroot_result in
++  =*)
++    func_stripname '=' '' "$func_resolve_sysroot_result"
++    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
++    ;;
++  esac
++}
++
++# func_replace_sysroot PATH
++# If PATH begins with the sysroot, replace it with = and
++# store the result into func_replace_sysroot_result.
++func_replace_sysroot ()
++{
++  case "$lt_sysroot:$1" in
++  ?*:"$lt_sysroot"*)
++    func_stripname "$lt_sysroot" '' "$1"
++    func_replace_sysroot_result="=$func_stripname_result"
++    ;;
++  *)
++    # Including no sysroot.
++    func_replace_sysroot_result=$1
++    ;;
++  esac
++}
++
+ # func_infer_tag arg
+ # Infer tagged configuration to use if any are available and
+ # if one wasn't chosen via the "--tag" command line option.
+@@ -1013,13 +1377,15 @@
+     if test -n "$available_tags" && test -z "$tagname"; then
+       CC_quoted=
+       for arg in $CC; do
+-        func_quote_for_eval "$arg"
+-	CC_quoted="$CC_quoted $func_quote_for_eval_result"
++	func_append_quoted CC_quoted "$arg"
+       done
++      CC_expanded=`func_echo_all $CC`
++      CC_quoted_expanded=`func_echo_all $CC_quoted`
+       case $@ in
+       # Blanks in the command may have been stripped by the calling shell,
+       # but not from the CC environment variable when configure was run.
+-      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
++      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+       # Blanks at the start of $base_compile will cause this to fail
+       # if we don't check for them as well.
+       *)
+@@ -1030,11 +1396,13 @@
+ 	    CC_quoted=
+ 	    for arg in $CC; do
+ 	      # Double-quote args containing other shell metacharacters.
+-	      func_quote_for_eval "$arg"
+-	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
++	      func_append_quoted CC_quoted "$arg"
+ 	    done
++	    CC_expanded=`func_echo_all $CC`
++	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+ 	    case "$@ " in
+-	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
++	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ 	      # The compiler in the base compile command matches
+ 	      # the one in the tagged configuration.
+ 	      # Assume this is the tagged configuration we want.
+@@ -1097,6 +1465,486 @@
+     }
+ }
+ 
++
++##################################################
++# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
++##################################################
++
++# func_convert_core_file_wine_to_w32 ARG
++# Helper function used by file name conversion functions when $build is *nix,
++# and $host is mingw, cygwin, or some other w32 environment. Relies on a
++# correctly configured wine environment available, with the winepath program
++# in $build's $PATH.
++#
++# ARG is the $build file name to be converted to w32 format.
++# Result is available in $func_convert_core_file_wine_to_w32_result, and will
++# be empty on error (or when ARG is empty)
++func_convert_core_file_wine_to_w32 ()
++{
++  $opt_debug
++  func_convert_core_file_wine_to_w32_result="$1"
++  if test -n "$1"; then
++    # Unfortunately, winepath does not exit with a non-zero error code, so we
++    # are forced to check the contents of stdout. On the other hand, if the
++    # command is not found, the shell will set an exit code of 127 and print
++    # *an error message* to stdout. So we must check for both error code of
++    # zero AND non-empty stdout, which explains the odd construction:
++    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
++    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
++      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
++        $SED -e "$lt_sed_naive_backslashify"`
++    else
++      func_convert_core_file_wine_to_w32_result=
++    fi
++  fi
++}
++# end: func_convert_core_file_wine_to_w32
++
++
++# func_convert_core_path_wine_to_w32 ARG
++# Helper function used by path conversion functions when $build is *nix, and
++# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
++# configured wine environment available, with the winepath program in $build's
++# $PATH. Assumes ARG has no leading or trailing path separator characters.
++#
++# ARG is path to be converted from $build format to win32.
++# Result is available in $func_convert_core_path_wine_to_w32_result.
++# Unconvertible file (directory) names in ARG are skipped; if no directory names
++# are convertible, then the result may be empty.
++func_convert_core_path_wine_to_w32 ()
++{
++  $opt_debug
++  # unfortunately, winepath doesn't convert paths, only file names
++  func_convert_core_path_wine_to_w32_result=""
++  if test -n "$1"; then
++    oldIFS=$IFS
++    IFS=:
++    for func_convert_core_path_wine_to_w32_f in $1; do
++      IFS=$oldIFS
++      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
++      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
++        if test -z "$func_convert_core_path_wine_to_w32_result"; then
++          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
++        else
++          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
++        fi
++      fi
++    done
++    IFS=$oldIFS
++  fi
++}
++# end: func_convert_core_path_wine_to_w32
++
++
++# func_cygpath ARGS...
++# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
++# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
++# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
++# (2), returns the Cygwin file name or path in func_cygpath_result (input
++# file name or path is assumed to be in w32 format, as previously converted
++# from $build's *nix or MSYS format). In case (3), returns the w32 file name
++# or path in func_cygpath_result (input file name or path is assumed to be in
++# Cygwin format). Returns an empty string on error.
++#
++# ARGS are passed to cygpath, with the last one being the file name or path to
++# be converted.
++#
++# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
++# environment variable; do not put it in $PATH.
++func_cygpath ()
++{
++  $opt_debug
++  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
++    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
++    if test "$?" -ne 0; then
++      # on failure, ensure result is empty
++      func_cygpath_result=
++    fi
++  else
++    func_cygpath_result=
++    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
++  fi
++}
++#end: func_cygpath
++
++
++# func_convert_core_msys_to_w32 ARG
++# Convert file name or path ARG from MSYS format to w32 format.  Return
++# result in func_convert_core_msys_to_w32_result.
++func_convert_core_msys_to_w32 ()
++{
++  $opt_debug
++  # awkward: cmd appends spaces to result
++  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
++    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
++}
++#end: func_convert_core_msys_to_w32
++
++
++# func_convert_file_check ARG1 ARG2
++# Verify that ARG1 (a file name in $build format) was converted to $host
++# format in ARG2. Otherwise, emit an error message, but continue (resetting
++# func_to_host_file_result to ARG1).
++func_convert_file_check ()
++{
++  $opt_debug
++  if test -z "$2" && test -n "$1" ; then
++    func_error "Could not determine host file name corresponding to"
++    func_error "  \`$1'"
++    func_error "Continuing, but uninstalled executables may not work."
++    # Fallback:
++    func_to_host_file_result="$1"
++  fi
++}
++# end func_convert_file_check
++
++
++# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
++# Verify that FROM_PATH (a path in $build format) was converted to $host
++# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
++# func_to_host_file_result to a simplistic fallback value (see below).
++func_convert_path_check ()
++{
++  $opt_debug
++  if test -z "$4" && test -n "$3"; then
++    func_error "Could not determine the host path corresponding to"
++    func_error "  \`$3'"
++    func_error "Continuing, but uninstalled executables may not work."
++    # Fallback.  This is a deliberately simplistic "conversion" and
++    # should not be "improved".  See libtool.info.
++    if test "x$1" != "x$2"; then
++      lt_replace_pathsep_chars="s|$1|$2|g"
++      func_to_host_path_result=`echo "$3" |
++        $SED -e "$lt_replace_pathsep_chars"`
++    else
++      func_to_host_path_result="$3"
++    fi
++  fi
++}
++# end func_convert_path_check
++
++
++# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
++# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
++# and appending REPL if ORIG matches BACKPAT.
++func_convert_path_front_back_pathsep ()
++{
++  $opt_debug
++  case $4 in
++  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
++    ;;
++  esac
++  case $4 in
++  $2 ) func_append func_to_host_path_result "$3"
++    ;;
++  esac
++}
++# end func_convert_path_front_back_pathsep
++
++
++##################################################
++# $build to $host FILE NAME CONVERSION FUNCTIONS #
++##################################################
++# invoked via `$to_host_file_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# Result will be available in $func_to_host_file_result.
++
++
++# func_to_host_file ARG
++# Converts the file name ARG from $build format to $host format. Return result
++# in func_to_host_file_result.
++func_to_host_file ()
++{
++  $opt_debug
++  $to_host_file_cmd "$1"
++}
++# end func_to_host_file
++
++
++# func_to_tool_file ARG LAZY
++# converts the file name ARG from $build format to toolchain format. Return
++# result in func_to_tool_file_result.  If the conversion in use is listed
++# in (the comma separated) LAZY, no conversion takes place.
++func_to_tool_file ()
++{
++  $opt_debug
++  case ,$2, in
++    *,"$to_tool_file_cmd",*)
++      func_to_tool_file_result=$1
++      ;;
++    *)
++      $to_tool_file_cmd "$1"
++      func_to_tool_file_result=$func_to_host_file_result
++      ;;
++  esac
++}
++# end func_to_tool_file
++
++
++# func_convert_file_noop ARG
++# Copy ARG to func_to_host_file_result.
++func_convert_file_noop ()
++{
++  func_to_host_file_result="$1"
++}
++# end func_convert_file_noop
++
++
++# func_convert_file_msys_to_w32 ARG
++# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper.  Returns result in
++# func_to_host_file_result.
++func_convert_file_msys_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_msys_to_w32 "$1"
++    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_w32
++
++
++# func_convert_file_cygwin_to_w32 ARG
++# Convert file name ARG from Cygwin to w32 format.  Returns result in
++# func_to_host_file_result.
++func_convert_file_cygwin_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
++    # LT_CYGPATH in this case.
++    func_to_host_file_result=`cygpath -m "$1"`
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_cygwin_to_w32
++
++
++# func_convert_file_nix_to_w32 ARG
++# Convert file name ARG from *nix to w32 format.  Requires a wine environment
++# and a working winepath. Returns result in func_to_host_file_result.
++func_convert_file_nix_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_file_wine_to_w32 "$1"
++    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_w32
++
++
++# func_convert_file_msys_to_cygwin ARG
++# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_file_msys_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_msys_to_w32 "$1"
++    func_cygpath -u "$func_convert_core_msys_to_w32_result"
++    func_to_host_file_result="$func_cygpath_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_cygwin
++
++
++# func_convert_file_nix_to_cygwin ARG
++# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
++# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
++# in func_to_host_file_result.
++func_convert_file_nix_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
++    func_convert_core_file_wine_to_w32 "$1"
++    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
++    func_to_host_file_result="$func_cygpath_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_cygwin
++
++
++#############################################
++# $build to $host PATH CONVERSION FUNCTIONS #
++#############################################
++# invoked via `$to_host_path_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# The result will be available in $func_to_host_path_result.
++#
++# Path separators are also converted from $build format to $host format.  If
++# ARG begins or ends with a path separator character, it is preserved (but
++# converted to $host format) on output.
++#
++# All path conversion functions are named using the following convention:
++#   file name conversion function    : func_convert_file_X_to_Y ()
++#   path conversion function         : func_convert_path_X_to_Y ()
++# where, for any given $build/$host combination the 'X_to_Y' value is the
++# same.  If conversion functions are added for new $build/$host combinations,
++# the two new functions must follow this pattern, or func_init_to_host_path_cmd
++# will break.
++
++
++# func_init_to_host_path_cmd
++# Ensures that function "pointer" variable $to_host_path_cmd is set to the
++# appropriate value, based on the value of $to_host_file_cmd.
++to_host_path_cmd=
++func_init_to_host_path_cmd ()
++{
++  $opt_debug
++  if test -z "$to_host_path_cmd"; then
++    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
++    to_host_path_cmd="func_convert_path_${func_stripname_result}"
++  fi
++}
++
++
++# func_to_host_path ARG
++# Converts the path ARG from $build format to $host format. Return result
++# in func_to_host_path_result.
++func_to_host_path ()
++{
++  $opt_debug
++  func_init_to_host_path_cmd
++  $to_host_path_cmd "$1"
++}
++# end func_to_host_path
++
++
++# func_convert_path_noop ARG
++# Copy ARG to func_to_host_path_result.
++func_convert_path_noop ()
++{
++  func_to_host_path_result="$1"
++}
++# end func_convert_path_noop
++
++
++# func_convert_path_msys_to_w32 ARG
++# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper.  Returns result in
++# func_to_host_path_result.
++func_convert_path_msys_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # Remove leading and trailing path separator characters from ARG.  MSYS
++    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
++    # and winepath ignores them completely.
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_msys_to_w32
++
++
++# func_convert_path_cygwin_to_w32 ARG
++# Convert path ARG from Cygwin to w32 format.  Returns result in
++# func_to_host_file_result.
++func_convert_path_cygwin_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_cygwin_to_w32
++
++
++# func_convert_path_nix_to_w32 ARG
++# Convert path ARG from *nix to w32 format.  Requires a wine environment and
++# a working winepath.  Returns result in func_to_host_file_result.
++func_convert_path_nix_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_nix_to_w32
++
++
++# func_convert_path_msys_to_cygwin ARG
++# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_path_msys_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
++    func_to_host_path_result="$func_cygpath_result"
++    func_convert_path_check : : \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++  fi
++}
++# end func_convert_path_msys_to_cygwin
++
++
++# func_convert_path_nix_to_cygwin ARG
++# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
++# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
++# func_to_host_file_result.
++func_convert_path_nix_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # Remove leading and trailing path separator characters from
++    # ARG. msys behavior is inconsistent here, cygpath turns them
++    # into '.;' and ';.', and winepath ignores them completely.
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
++    func_to_host_path_result="$func_cygpath_result"
++    func_convert_path_check : : \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++  fi
++}
++# end func_convert_path_nix_to_cygwin
++
++
+ # func_mode_compile arg...
+ func_mode_compile ()
+ {
+@@ -1137,12 +1985,12 @@
+ 	  ;;
+ 
+ 	-pie | -fpie | -fPIE)
+-          pie_flag="$pie_flag $arg"
++          func_append pie_flag " $arg"
+ 	  continue
+ 	  ;;
+ 
+ 	-shared | -static | -prefer-pic | -prefer-non-pic)
+-	  later="$later $arg"
++	  func_append later " $arg"
+ 	  continue
+ 	  ;;
+ 
+@@ -1163,15 +2011,14 @@
+ 	  save_ifs="$IFS"; IFS=','
+ 	  for arg in $args; do
+ 	    IFS="$save_ifs"
+-	    func_quote_for_eval "$arg"
+-	    lastarg="$lastarg $func_quote_for_eval_result"
++	    func_append_quoted lastarg "$arg"
+ 	  done
+ 	  IFS="$save_ifs"
+ 	  func_stripname ' ' '' "$lastarg"
+ 	  lastarg=$func_stripname_result
+ 
+ 	  # Add the arguments to base_compile.
+-	  base_compile="$base_compile $lastarg"
++	  func_append base_compile " $lastarg"
+ 	  continue
+ 	  ;;
+ 
+@@ -1187,8 +2034,7 @@
+       esac    #  case $arg_mode
+ 
+       # Aesthetically quote the previous argument.
+-      func_quote_for_eval "$lastarg"
+-      base_compile="$base_compile $func_quote_for_eval_result"
++      func_append_quoted base_compile "$lastarg"
+     done # for arg
+ 
+     case $arg_mode in
+@@ -1213,7 +2059,7 @@
+     *.[cCFSifmso] | \
+     *.ada | *.adb | *.ads | *.asm | \
+     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+-    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
++    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+       func_xform "$libobj"
+       libobj=$func_xform_result
+       ;;
+@@ -1288,7 +2134,7 @@
+     # Calculate the filename of the output object if compiler does
+     # not support -o with -c
+     if test "$compiler_c_o" = no; then
+-      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
++      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+       lockfile="$output_obj.lock"
+     else
+       output_obj=
+@@ -1319,17 +2165,16 @@
+ 	$opt_dry_run || $RM $removelist
+ 	exit $EXIT_FAILURE
+       fi
+-      removelist="$removelist $output_obj"
++      func_append removelist " $output_obj"
+       $ECHO "$srcfile" > "$lockfile"
+     fi
+ 
+     $opt_dry_run || $RM $removelist
+-    removelist="$removelist $lockfile"
++    func_append removelist " $lockfile"
+     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+ 
+-    if test -n "$fix_srcfile_path"; then
+-      eval srcfile=\"$fix_srcfile_path\"
+-    fi
++    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
++    srcfile=$func_to_tool_file_result
+     func_quote_for_eval "$srcfile"
+     qsrcfile=$func_quote_for_eval_result
+ 
+@@ -1349,7 +2194,7 @@
+ 
+       if test -z "$output_obj"; then
+ 	# Place PIC objects in $objdir
+-	command="$command -o $lobj"
++	func_append command " -o $lobj"
+       fi
+ 
+       func_show_eval_locale "$command"	\
+@@ -1396,11 +2241,11 @@
+ 	command="$base_compile $qsrcfile $pic_flag"
+       fi
+       if test "$compiler_c_o" = yes; then
+-	command="$command -o $obj"
++	func_append command " -o $obj"
+       fi
+ 
+       # Suppress compiler output if we already did a PIC compilation.
+-      command="$command$suppress_output"
++      func_append command "$suppress_output"
+       func_show_eval_locale "$command" \
+         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+ 
+@@ -1445,13 +2290,13 @@
+ }
+ 
+ $opt_help || {
+-test "$mode" = compile && func_mode_compile ${1+"$@"}
++  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ }
+ 
+ func_mode_help ()
+ {
+     # We need to display help for each of the modes.
+-    case $mode in
++    case $opt_mode in
+       "")
+         # Generic help is extracted from the usage comments
+         # at the start of this file.
+@@ -1482,10 +2327,11 @@
+ 
+   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+   -no-suppress      do not suppress compiler output for multiple passes
+-  -prefer-pic       try to building PIC objects only
+-  -prefer-non-pic   try to building non-PIC objects only
++  -prefer-pic       try to build PIC objects only
++  -prefer-non-pic   try to build non-PIC objects only
+   -shared           do not build a \`.o' file suitable for static linking
+   -static           only build a \`.o' file suitable for static linking
++  -Wc,FLAG          pass FLAG directly to the compiler
+ 
+ COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+ from the given SOURCEFILE.
+@@ -1538,7 +2384,7 @@
+ 
+ The following components of INSTALL-COMMAND are treated specially:
+ 
+-  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
++  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+ 
+ The rest of the components are interpreted as arguments to that command (only
+ BSD-compatible install options are recognized)."
+@@ -1558,6 +2404,8 @@
+ 
+   -all-static       do not do any dynamic linking at all
+   -avoid-version    do not add a version suffix if possible
++  -bindir BINDIR    specify path to binaries directory (for systems where
++                    libraries must be found in the PATH setting at runtime)
+   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+@@ -1586,6 +2434,11 @@
+   -version-info CURRENT[:REVISION[:AGE]]
+                     specify library version info [each variable defaults to 0]
+   -weak LIBNAME     declare that the target provides the LIBNAME interface
++  -Wc,FLAG
++  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
++  -Wl,FLAG
++  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
++  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+ 
+ All other options (arguments beginning with \`-') are ignored.
+ 
+@@ -1619,18 +2472,44 @@
+         ;;
+ 
+       *)
+-        func_fatal_help "invalid operation mode \`$mode'"
++        func_fatal_help "invalid operation mode \`$opt_mode'"
+         ;;
+     esac
+ 
+-    $ECHO
++    echo
+     $ECHO "Try \`$progname --help' for more information about other modes."
+-
+-    exit $?
+ }
+ 
+-  # Now that we've collected a possible --mode arg, show help if necessary
+-  $opt_help && func_mode_help
++# Now that we've collected a possible --mode arg, show help if necessary
++if $opt_help; then
++  if test "$opt_help" = :; then
++    func_mode_help
++  else
++    {
++      func_help noexit
++      for opt_mode in compile link execute install finish uninstall clean; do
++	func_mode_help
++      done
++    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
++    {
++      func_help noexit
++      for opt_mode in compile link execute install finish uninstall clean; do
++	echo
++	func_mode_help
++      done
++    } |
++    sed '1d
++      /^When reporting/,/^Report/{
++	H
++	d
++      }
++      $x
++      /information about other modes/d
++      /more detailed .*MODE/d
++      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
++  fi
++  exit $?
++fi
+ 
+ 
+ # func_mode_execute arg...
+@@ -1643,13 +2522,16 @@
+       func_fatal_help "you must specify a COMMAND"
+ 
+     # Handle -dlopen flags immediately.
+-    for file in $execute_dlfiles; do
++    for file in $opt_dlopen; do
+       test -f "$file" \
+ 	|| func_fatal_help "\`$file' is not a file"
+ 
+       dir=
+       case $file in
+       *.la)
++	func_resolve_sysroot "$file"
++	file=$func_resolve_sysroot_result
++
+ 	# Check to see that this really is a libtool archive.
+ 	func_lalib_unsafe_p "$file" \
+ 	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+@@ -1671,7 +2553,7 @@
+ 	dir="$func_dirname_result"
+ 
+ 	if test -f "$dir/$objdir/$dlname"; then
+-	  dir="$dir/$objdir"
++	  func_append dir "/$objdir"
+ 	else
+ 	  if test ! -f "$dir/$dlname"; then
+ 	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+@@ -1712,7 +2594,7 @@
+     for file
+     do
+       case $file in
+-      -*) ;;
++      -* | *.la | *.lo ) ;;
+       *)
+ 	# Do a test to see if this is really a libtool program.
+ 	if func_ltwrapper_script_p "$file"; then
+@@ -1728,8 +2610,7 @@
+ 	;;
+       esac
+       # Quote arguments (to preserve shell metacharacters).
+-      func_quote_for_eval "$file"
+-      args="$args $func_quote_for_eval_result"
++      func_append_quoted args "$file"
+     done
+ 
+     if test "X$opt_dry_run" = Xfalse; then
+@@ -1754,29 +2635,66 @@
+       # Display what would be done.
+       if test -n "$shlibpath_var"; then
+ 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+-	$ECHO "export $shlibpath_var"
++	echo "export $shlibpath_var"
+       fi
+       $ECHO "$cmd$args"
+       exit $EXIT_SUCCESS
+     fi
+ }
+ 
+-test "$mode" = execute && func_mode_execute ${1+"$@"}
++test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
++
++
++# func_mode_finish arg...
++func_mode_finish ()
++{
++    $opt_debug
++    libs=
++    libdirs=
++    admincmds=
++
++    for opt in "$nonopt" ${1+"$@"}
++    do
++      if test -d "$opt"; then
++	func_append libdirs " $opt"
++
++      elif test -f "$opt"; then
++	if func_lalib_unsafe_p "$opt"; then
++	  func_append libs " $opt"
++	else
++	  func_warning "\`$opt' is not a valid libtool archive"
++	fi
++
++      else
++	func_fatal_error "invalid argument \`$opt'"
++      fi
++    done
+ 
++    if test -n "$libs"; then
++      if test -n "$lt_sysroot"; then
++        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
++        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
++      else
++        sysroot_cmd=
++      fi
+ 
+-# func_mode_finish arg...
+-func_mode_finish ()
+-{
+-    $opt_debug
+-    libdirs="$nonopt"
+-    admincmds=
++      # Remove sysroot references
++      if $opt_dry_run; then
++        for lib in $libs; do
++          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
++        done
++      else
++        tmpdir=`func_mktempdir`
++        for lib in $libs; do
++	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
++	    > $tmpdir/tmp-la
++	  mv -f $tmpdir/tmp-la $lib
++	done
++        ${RM}r "$tmpdir"
++      fi
++    fi
+ 
+     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+-      for dir
+-      do
+-	libdirs="$libdirs $dir"
+-      done
+-
+       for libdir in $libdirs; do
+ 	if test -n "$finish_cmds"; then
+ 	  # Do each command in the finish commands.
+@@ -1786,7 +2704,7 @@
+ 	if test -n "$finish_eval"; then
+ 	  # Do the single finish_eval.
+ 	  eval cmds=\"$finish_eval\"
+-	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
++	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+        $cmds"
+ 	fi
+       done
+@@ -1795,53 +2713,55 @@
+     # Exit here if they wanted silent mode.
+     $opt_silent && exit $EXIT_SUCCESS
+ 
+-    $ECHO "X----------------------------------------------------------------------" | $Xsed
+-    $ECHO "Libraries have been installed in:"
+-    for libdir in $libdirs; do
+-      $ECHO "   $libdir"
+-    done
+-    $ECHO
+-    $ECHO "If you ever happen to want to link against installed libraries"
+-    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+-    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+-    $ECHO "flag during linking and do at least one of the following:"
+-    if test -n "$shlibpath_var"; then
+-      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+-      $ECHO "     during execution"
+-    fi
+-    if test -n "$runpath_var"; then
+-      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+-      $ECHO "     during linking"
+-    fi
+-    if test -n "$hardcode_libdir_flag_spec"; then
+-      libdir=LIBDIR
+-      eval flag=\"$hardcode_libdir_flag_spec\"
++    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++      echo "----------------------------------------------------------------------"
++      echo "Libraries have been installed in:"
++      for libdir in $libdirs; do
++	$ECHO "   $libdir"
++      done
++      echo
++      echo "If you ever happen to want to link against installed libraries"
++      echo "in a given directory, LIBDIR, you must either use libtool, and"
++      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++      echo "flag during linking and do at least one of the following:"
++      if test -n "$shlibpath_var"; then
++	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
++	echo "     during execution"
++      fi
++      if test -n "$runpath_var"; then
++	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
++	echo "     during linking"
++      fi
++      if test -n "$hardcode_libdir_flag_spec"; then
++	libdir=LIBDIR
++	eval flag=\"$hardcode_libdir_flag_spec\"
+ 
+-      $ECHO "   - use the \`$flag' linker flag"
+-    fi
+-    if test -n "$admincmds"; then
+-      $ECHO "   - have your system administrator run these commands:$admincmds"
+-    fi
+-    if test -f /etc/ld.so.conf; then
+-      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+-    fi
+-    $ECHO
++	$ECHO "   - use the \`$flag' linker flag"
++      fi
++      if test -n "$admincmds"; then
++	$ECHO "   - have your system administrator run these commands:$admincmds"
++      fi
++      if test -f /etc/ld.so.conf; then
++	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++      fi
++      echo
+ 
+-    $ECHO "See any operating system documentation about shared libraries for"
+-    case $host in
+-      solaris2.[6789]|solaris2.1[0-9])
+-        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+-	$ECHO "pages."
+-	;;
+-      *)
+-        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+-        ;;
+-    esac
+-    $ECHO "X----------------------------------------------------------------------" | $Xsed
++      echo "See any operating system documentation about shared libraries for"
++      case $host in
++	solaris2.[6789]|solaris2.1[0-9])
++	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
++	  echo "pages."
++	  ;;
++	*)
++	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
++	  ;;
++      esac
++      echo "----------------------------------------------------------------------"
++    fi
+     exit $EXIT_SUCCESS
+ }
+ 
+-test "$mode" = finish && func_mode_finish ${1+"$@"}
++test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+ 
+ 
+ # func_mode_install arg...
+@@ -1852,7 +2772,7 @@
+     # install_prog (especially on Windows NT).
+     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+        # Allow the use of GNU shtool's install command.
+-       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
++       case $nonopt in *shtool*) :;; *) false;; esac; then
+       # Aesthetically quote it.
+       func_quote_for_eval "$nonopt"
+       install_prog="$func_quote_for_eval_result "
+@@ -1866,7 +2786,12 @@
+     # The real first argument should be the name of the installation program.
+     # Aesthetically quote it.
+     func_quote_for_eval "$arg"
+-    install_prog="$install_prog$func_quote_for_eval_result"
++    func_append install_prog "$func_quote_for_eval_result"
++    install_shared_prog=$install_prog
++    case " $install_prog " in
++      *[\\\ /]cp\ *) install_cp=: ;;
++      *) install_cp=false ;;
++    esac
+ 
+     # We need to accept at least all the BSD install flags.
+     dest=
+@@ -1876,10 +2801,12 @@
+     install_type=
+     isdir=no
+     stripme=
++    no_mode=:
+     for arg
+     do
++      arg2=
+       if test -n "$dest"; then
+-	files="$files $dest"
++	func_append files " $dest"
+ 	dest=$arg
+ 	continue
+       fi
+@@ -1887,10 +2814,9 @@
+       case $arg in
+       -d) isdir=yes ;;
+       -f)
+-	case " $install_prog " in
+-	*[\\\ /]cp\ *) ;;
+-	*) prev=$arg ;;
+-	esac
++	if $install_cp; then :; else
++	  prev=$arg
++	fi
+ 	;;
+       -g | -m | -o)
+ 	prev=$arg
+@@ -1904,6 +2830,10 @@
+       *)
+ 	# If the previous option needed an argument, then skip it.
+ 	if test -n "$prev"; then
++	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
++	    arg2=$install_override_mode
++	    no_mode=false
++	  fi
+ 	  prev=
+ 	else
+ 	  dest=$arg
+@@ -1914,7 +2844,11 @@
+ 
+       # Aesthetically quote the argument.
+       func_quote_for_eval "$arg"
+-      install_prog="$install_prog $func_quote_for_eval_result"
++      func_append install_prog " $func_quote_for_eval_result"
++      if test -n "$arg2"; then
++	func_quote_for_eval "$arg2"
++      fi
++      func_append install_shared_prog " $func_quote_for_eval_result"
+     done
+ 
+     test -z "$install_prog" && \
+@@ -1923,6 +2857,13 @@
+     test -n "$prev" && \
+       func_fatal_help "the \`$prev' option requires an argument"
+ 
++    if test -n "$install_override_mode" && $no_mode; then
++      if $install_cp; then :; else
++	func_quote_for_eval "$install_override_mode"
++	func_append install_shared_prog " -m $func_quote_for_eval_result"
++      fi
++    fi
++
+     if test -z "$files"; then
+       if test -z "$dest"; then
+ 	func_fatal_help "no file or destination specified"
+@@ -1977,10 +2918,13 @@
+       case $file in
+       *.$libext)
+ 	# Do the static libraries later.
+-	staticlibs="$staticlibs $file"
++	func_append staticlibs " $file"
+ 	;;
+ 
+       *.la)
++	func_resolve_sysroot "$file"
++	file=$func_resolve_sysroot_result
++
+ 	# Check to see that this really is a libtool archive.
+ 	func_lalib_unsafe_p "$file" \
+ 	  || func_fatal_help "\`$file' is not a valid libtool archive"
+@@ -1994,23 +2938,30 @@
+ 	if test "X$destdir" = "X$libdir"; then
+ 	  case "$current_libdirs " in
+ 	  *" $libdir "*) ;;
+-	  *) current_libdirs="$current_libdirs $libdir" ;;
++	  *) func_append current_libdirs " $libdir" ;;
+ 	  esac
+ 	else
+ 	  # Note the libdir as a future libdir.
+ 	  case "$future_libdirs " in
+ 	  *" $libdir "*) ;;
+-	  *) future_libdirs="$future_libdirs $libdir" ;;
++	  *) func_append future_libdirs " $libdir" ;;
+ 	  esac
+ 	fi
+ 
+ 	func_dirname "$file" "/" ""
+ 	dir="$func_dirname_result"
+-	dir="$dir$objdir"
++	func_append dir "$objdir"
+ 
+ 	if test -n "$relink_command"; then
++      # Strip any trailing slash from the destination.
++      func_stripname '' '/' "$libdir"
++      destlibdir=$func_stripname_result
++
++      func_stripname '' '/' "$destdir"
++      s_destdir=$func_stripname_result
++
+ 	  # Determine the prefix the user has applied to our future dir.
+-	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
++	  inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
+ 
+ 	  # Don't allow the user to place us outside of our expected
+ 	  # location b/c this prevents finding dependent libraries that
+@@ -2023,9 +2974,9 @@
+ 
+ 	  if test -n "$inst_prefix_dir"; then
+ 	    # Stick the inst_prefix_dir data into the link command.
+-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ 	  else
+-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
++	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ 	  fi
+ 
+ 	  func_warning "relinking \`$file'"
+@@ -2043,7 +2994,7 @@
+ 	  test -n "$relink_command" && srcname="$realname"T
+ 
+ 	  # Install the shared library and build the symlinks.
+-	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
++	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 	      'exit $?'
+ 	  tstripme="$stripme"
+ 	  case $host_os in
+@@ -2083,7 +3034,7 @@
+ 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+ 
+ 	# Maybe install the static library, too.
+-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
++	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ 	;;
+ 
+       *.lo)
+@@ -2183,7 +3134,7 @@
+ 	    if test -f "$lib"; then
+ 	      func_source "$lib"
+ 	    fi
+-	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
++	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ 	    if test -n "$libdir" && test ! -f "$libfile"; then
+ 	      func_warning "\`$lib' has not been installed in \`$libdir'"
+ 	      finalize=no
+@@ -2202,7 +3153,7 @@
+ 		file="$func_basename_result"
+ 	        outputname="$tmpdir/$file"
+ 	        # Replace the output file specification.
+-	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
++	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+ 
+ 	        $opt_silent || {
+ 	          func_quote_for_expand "$relink_command"
+@@ -2221,7 +3172,7 @@
+ 	    }
+ 	  else
+ 	    # Install the binary that we compiled earlier.
+-	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
++	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ 	  fi
+ 	fi
+ 
+@@ -2280,7 +3231,7 @@
+     fi
+ }
+ 
+-test "$mode" = install && func_mode_install ${1+"$@"}
++test "$opt_mode" = install && func_mode_install ${1+"$@"}
+ 
+ 
+ # func_generate_dlsyms outputname originator pic_p
+@@ -2323,6 +3274,22 @@
+ extern \"C\" {
+ #endif
+ 
++#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
++#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
++#endif
++
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++   relocations are performed -- see ld's documentation on pseudo-relocs.  */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data.  */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
++
+ /* External symbol declarations for the compiler. */\
+ "
+ 
+@@ -2332,10 +3299,11 @@
+ 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+ 
+ 	  # Add our own program objects to the symbol list.
+-	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ 	  for progfile in $progfiles; do
+-	    func_verbose "extracting global C symbols from \`$progfile'"
+-	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
++	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
++	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
++	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ 	  done
+ 
+ 	  if test -n "$exclude_expsyms"; then
+@@ -2371,7 +3339,7 @@
+ 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ 	      eval '$MV "$nlist"T "$nlist"'
+ 	      case $host in
+-	        *cygwin | *mingw* | *cegcc* )
++	        *cygwin* | *mingw* | *cegcc* )
+ 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ 	          ;;
+@@ -2384,10 +3352,52 @@
+ 	  func_verbose "extracting global C symbols from \`$dlprefile'"
+ 	  func_basename "$dlprefile"
+ 	  name="$func_basename_result"
+-	  $opt_dry_run || {
+-	    eval '$ECHO ": $name " >> "$nlist"'
+-	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+-	  }
++          case $host in
++	    *cygwin* | *mingw* | *cegcc* )
++	      # if an import library, we need to obtain dlname
++	      if func_win32_import_lib_p "$dlprefile"; then
++	        func_tr_sh "$dlprefile"
++	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
++	        dlprefile_dlbasename=""
++	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
++	          # Use subshell, to avoid clobbering current variable values
++	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
++	          if test -n "$dlprefile_dlname" ; then
++	            func_basename "$dlprefile_dlname"
++	            dlprefile_dlbasename="$func_basename_result"
++	          else
++	            # no lafile. user explicitly requested -dlpreopen <import library>.
++	            $sharedlib_from_linklib_cmd "$dlprefile"
++	            dlprefile_dlbasename=$sharedlib_from_linklib_result
++	          fi
++	        fi
++	        $opt_dry_run || {
++	          if test -n "$dlprefile_dlbasename" ; then
++	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
++	          else
++	            func_warning "Could not compute DLL name from $name"
++	            eval '$ECHO ": $name " >> "$nlist"'
++	          fi
++	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
++	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
++	        }
++	      else # not an import lib
++	        $opt_dry_run || {
++	          eval '$ECHO ": $name " >> "$nlist"'
++	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++	        }
++	      fi
++	    ;;
++	    *)
++	      $opt_dry_run || {
++	        eval '$ECHO ": $name " >> "$nlist"'
++	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++	      }
++	    ;;
++          esac
+ 	done
+ 
+ 	$opt_dry_run || {
+@@ -2415,36 +3425,19 @@
+ 	  if test -f "$nlist"S; then
+ 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ 	  else
+-	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
++	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ 	  fi
+ 
+-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
++	  echo >> "$output_objdir/$my_dlsyms" "\
+ 
+ /* The mapping between symbol names and symbols.  */
+ typedef struct {
+   const char *name;
+   void *address;
+ } lt_dlsymlist;
+-"
+-	  case $host in
+-	  *cygwin* | *mingw* | *cegcc* )
+-	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+-/* DATA imports from DLLs on WIN32 con't be const, because
+-   runtime relocations are performed -- see ld's documentation
+-   on pseudo-relocs.  */"
+-	    lt_dlsym_const= ;;
+-	  *osf5*)
+-	    echo >> "$output_objdir/$my_dlsyms" "\
+-/* This system does not cope well with relocations in const data */"
+-	    lt_dlsym_const= ;;
+-	  *)
+-	    lt_dlsym_const=const ;;
+-	  esac
+-
+-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+-extern $lt_dlsym_const lt_dlsymlist
++extern LT_DLSYM_CONST lt_dlsymlist
+ lt_${my_prefix}_LTX_preloaded_symbols[];
+-$lt_dlsym_const lt_dlsymlist
++LT_DLSYM_CONST lt_dlsymlist
+ lt_${my_prefix}_LTX_preloaded_symbols[] =
+ {\
+   { \"$my_originator\", (void *) 0 },"
+@@ -2457,7 +3450,7 @@
+ 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ 	    ;;
+ 	  esac
+-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
++	  echo >> "$output_objdir/$my_dlsyms" "\
+   {0, (void *) 0}
+ };
+ 
+@@ -2500,7 +3493,7 @@
+ 	for arg in $LTCFLAGS; do
+ 	  case $arg in
+ 	  -pie | -fpie | -fPIE) ;;
+-	  *) symtab_cflags="$symtab_cflags $arg" ;;
++	  *) func_append symtab_cflags " $arg" ;;
+ 	  esac
+ 	done
+ 
+@@ -2515,16 +3508,16 @@
+ 	case $host in
+ 	*cygwin* | *mingw* | *cegcc* )
+ 	  if test -f "$output_objdir/$my_outputname.def"; then
+-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ 	  else
+-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
++	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ 	  fi
+ 	  ;;
+ 	*)
+-	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+-	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
++	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ 	  ;;
+ 	esac
+ 	;;
+@@ -2538,8 +3531,8 @@
+       # really was required.
+ 
+       # Nullify the symbol file.
+-      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+-      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
++      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
++      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+     fi
+ }
+ 
+@@ -2549,6 +3542,7 @@
+ # Need a lot of goo to handle *both* DLLs and import libs
+ # Has to be a shell function in order to 'eat' the argument
+ # that is supplied when $file_magic_command is called.
++# Despite the name, also deal with 64 bit binaries.
+ func_win32_libid ()
+ {
+   $opt_debug
+@@ -2559,9 +3553,11 @@
+     win32_libid_type="x86 archive import"
+     ;;
+   *ar\ archive*) # could be an import, or static
++    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+-       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+-      win32_nmres=`eval $NM -f posix -A $1 |
++       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
++      func_to_tool_file "$1" func_convert_file_msys_to_w32
++      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ 	$SED -n -e '
+ 	    1,100{
+ 		/ I /{
+@@ -2590,6 +3586,131 @@
+   $ECHO "$win32_libid_type"
+ }
+ 
++# func_cygming_dll_for_implib ARG
++#
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++# Invoked by eval'ing the libtool variable
++#    $sharedlib_from_linklib_cmd
++# Result is available in the variable
++#    $sharedlib_from_linklib_result
++func_cygming_dll_for_implib ()
++{
++  $opt_debug
++  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
++}
++
++# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
++#
++# The is the core of a fallback implementation of a
++# platform-specific function to extract the name of the
++# DLL associated with the specified import library LIBNAME.
++#
++# SECTION_NAME is either .idata$6 or .idata$7, depending
++# on the platform and compiler that created the implib.
++#
++# Echos the name of the DLL associated with the
++# specified import library.
++func_cygming_dll_for_implib_fallback_core ()
++{
++  $opt_debug
++  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
++  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
++    $SED '/^Contents of section '"$match_literal"':/{
++      # Place marker at beginning of archive member dllname section
++      s/.*/====MARK====/
++      p
++      d
++    }
++    # These lines can sometimes be longer than 43 characters, but
++    # are always uninteresting
++    /:[	 ]*file format pe[i]\{,1\}-/d
++    /^In archive [^:]*:/d
++    # Ensure marker is printed
++    /^====MARK====/p
++    # Remove all lines with less than 43 characters
++    /^.\{43\}/!d
++    # From remaining lines, remove first 43 characters
++    s/^.\{43\}//' |
++    $SED -n '
++      # Join marker and all lines until next marker into a single line
++      /^====MARK====/ b para
++      H
++      $ b para
++      b
++      :para
++      x
++      s/\n//g
++      # Remove the marker
++      s/^====MARK====//
++      # Remove trailing dots and whitespace
++      s/[\. \t]*$//
++      # Print
++      /./p' |
++    # we now have a list, one entry per line, of the stringified
++    # contents of the appropriate section of all members of the
++    # archive which possess that section. Heuristic: eliminate
++    # all those which have a first or second character that is
++    # a '.' (that is, objdump's representation of an unprintable
++    # character.) This should work for all archives with less than
++    # 0x302f exports -- but will fail for DLLs whose name actually
++    # begins with a literal '.' or a single character followed by
++    # a '.'.
++    #
++    # Of those that remain, print the first one.
++    $SED -e '/^\./d;/^.\./d;q'
++}
++
++# func_cygming_gnu_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is a GNU/binutils-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_gnu_implib_p ()
++{
++  $opt_debug
++  func_to_tool_file "$1" func_convert_file_msys_to_w32
++  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
++  test -n "$func_cygming_gnu_implib_tmp"
++}
++
++# func_cygming_ms_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is an MS-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_ms_implib_p ()
++{
++  $opt_debug
++  func_to_tool_file "$1" func_convert_file_msys_to_w32
++  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
++  test -n "$func_cygming_ms_implib_tmp"
++}
++
++# func_cygming_dll_for_implib_fallback ARG
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++#
++# This fallback implementation is for use when $DLLTOOL
++# does not support the --identify-strict option.
++# Invoked by eval'ing the libtool variable
++#    $sharedlib_from_linklib_cmd
++# Result is available in the variable
++#    $sharedlib_from_linklib_result
++func_cygming_dll_for_implib_fallback ()
++{
++  $opt_debug
++  if func_cygming_gnu_implib_p "$1" ; then
++    # binutils import library
++    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
++  elif func_cygming_ms_implib_p "$1" ; then
++    # ms-generated import library
++    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
++  else
++    # unknown
++    sharedlib_from_linklib_result=""
++  fi
++}
+ 
+ 
+ # func_extract_an_archive dir oldlib
+@@ -2598,7 +3719,18 @@
+     $opt_debug
+     f_ex_an_ar_dir="$1"; shift
+     f_ex_an_ar_oldlib="$1"
+-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
++    if test "$lock_old_archive_extraction" = yes; then
++      lockfile=$f_ex_an_ar_oldlib.lock
++      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
++	func_echo "Waiting for $lockfile to be removed"
++	sleep 2
++      done
++    fi
++    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
++		   'stat=$?; rm -f "$lockfile"; exit $stat'
++    if test "$lock_old_archive_extraction" = yes; then
++      $opt_dry_run || rm -f "$lockfile"
++    fi
+     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+      :
+     else
+@@ -2669,7 +3801,7 @@
+ 	    darwin_file=
+ 	    darwin_files=
+ 	    for darwin_file in $darwin_filelist; do
+-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
++	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ 	      $LIPO -create -output "$darwin_file" $darwin_files
+ 	    done # $darwin_filelist
+ 	    $RM -rf unfat-$$
+@@ -2684,25 +3816,30 @@
+         func_extract_an_archive "$my_xdir" "$my_xabs"
+ 	;;
+       esac
+-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
++      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+     done
+ 
+     func_extract_archives_result="$my_oldobjs"
+ }
+ 
+ 
+-
+-# func_emit_wrapper_part1 [arg=no]
++# func_emit_wrapper [arg=no]
+ #
+-# Emit the first part of a libtool wrapper script on stdout.
+-# For more information, see the description associated with
+-# func_emit_wrapper(), below.
+-func_emit_wrapper_part1 ()
+-{
+-	func_emit_wrapper_part1_arg1=no
+-	if test -n "$1" ; then
+-	  func_emit_wrapper_part1_arg1=$1
+-	fi
++# Emit a libtool wrapper script on stdout.
++# Don't directly open a file because we may want to
++# incorporate the script contents within a cygwin/mingw
++# wrapper executable.  Must ONLY be called from within
++# func_mode_link because it depends on a number of variables
++# set therein.
++#
++# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
++# variable will take.  If 'yes', then the emitted script
++# will assume that the directory in which it is stored is
++# the $objdir directory.  This is a cygwin/mingw-specific
++# behavior.
++func_emit_wrapper ()
++{
++	func_emit_wrapper_arg1=${1-no}
+ 
+ 	$ECHO "\
+ #! $SHELL
+@@ -2718,7 +3855,6 @@
+ 
+ # Sed substitution that helps us do robust quoting.  It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed='${SED} -e 1s/^X//'
+ sed_quote_subst='$sed_quote_subst'
+ 
+ # Be Bourne compatible
+@@ -2749,31 +3885,132 @@
+ else
+   # When we are sourced in execute mode, \$file and \$ECHO are already set.
+   if test \"\$libtool_execute_magic\" != \"$magic\"; then
+-    ECHO=\"$qecho\"
+-    file=\"\$0\"
+-    # Make sure echo works.
+-    if test \"X\$1\" = X--no-reexec; then
+-      # Discard the --no-reexec flag, and continue.
+-      shift
+-    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+-      # Yippee, \$ECHO works!
+-      :
+-    else
+-      # Restart under the correct shell, and then maybe \$ECHO will work.
+-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+-    fi
+-  fi\
++    file=\"\$0\""
++
++    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
++    $ECHO "\
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++\$1
++_LTECHO_EOF'
++}
++    ECHO=\"$qECHO\"
++  fi
++
++# Very basic option parsing. These options are (a) specific to
++# the libtool wrapper, (b) are identical between the wrapper
++# /script/ and the wrapper /executable/ which is used only on
++# windows platforms, and (c) all begin with the string "--lt-"
++# (application programs are unlikely to have options which match
++# this pattern).
++#
++# There are only two supported options: --lt-debug and
++# --lt-dump-script. There is, deliberately, no --lt-help.
++#
++# The first argument to this parsing function should be the
++# script's $0 value, followed by "$@".
++lt_option_debug=
++func_parse_lt_options ()
++{
++  lt_script_arg0=\$0
++  shift
++  for lt_opt
++  do
++    case \"\$lt_opt\" in
++    --lt-debug) lt_option_debug=1 ;;
++    --lt-dump-script)
++        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
++        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
++        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
++        cat \"\$lt_dump_D/\$lt_dump_F\"
++        exit 0
++      ;;
++    --lt-*)
++        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
++        exit 1
++      ;;
++    esac
++  done
++
++  # Print the debug banner immediately:
++  if test -n \"\$lt_option_debug\"; then
++    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
++  fi
++}
++
++# Used when --lt-debug. Prints its arguments to stdout
++# (redirection is the responsibility of the caller)
++func_lt_dump_args ()
++{
++  lt_dump_args_N=1;
++  for lt_arg
++  do
++    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
++    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
++  done
++}
++
++# Core function for launching the target application
++func_exec_program_core ()
++{
+ "
+-	$ECHO "\
++  case $host in
++  # Backslashes separate directories on plain windows
++  *-*-mingw | *-*-os2* | *-cegcc*)
++    $ECHO "\
++      if test -n \"\$lt_option_debug\"; then
++        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
++        func_lt_dump_args \${1+\"\$@\"} 1>&2
++      fi
++      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
++"
++    ;;
++
++  *)
++    $ECHO "\
++      if test -n \"\$lt_option_debug\"; then
++        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
++        func_lt_dump_args \${1+\"\$@\"} 1>&2
++      fi
++      exec \"\$progdir/\$program\" \${1+\"\$@\"}
++"
++    ;;
++  esac
++  $ECHO "\
++      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
++      exit 1
++}
++
++# A function to encapsulate launching the target application
++# Strips options in the --lt-* namespace from \$@ and
++# launches target application with the remaining arguments.
++func_exec_program ()
++{
++  for lt_wr_arg
++  do
++    case \$lt_wr_arg in
++    --lt-*) ;;
++    *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
++    esac
++    shift
++  done
++  func_exec_program_core \${1+\"\$@\"}
++}
++
++  # Parse options
++  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+ 
+   # Find the directory that this script lives in.
+-  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
++  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+ 
+   # Follow symbolic links until we get to the real thisdir.
+-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
++  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+   while test -n \"\$file\"; do
+-    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
++    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+ 
+     # If there was a directory component, then change thisdir.
+     if test \"x\$destdir\" != \"x\$file\"; then
+@@ -2783,30 +4020,13 @@
+       esac
+     fi
+ 
+-    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
++    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
++    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+   done
+-"
+-}
+-# end: func_emit_wrapper_part1
+-
+-# func_emit_wrapper_part2 [arg=no]
+-#
+-# Emit the second part of a libtool wrapper script on stdout.
+-# For more information, see the description associated with
+-# func_emit_wrapper(), below.
+-func_emit_wrapper_part2 ()
+-{
+-	func_emit_wrapper_part2_arg1=no
+-	if test -n "$1" ; then
+-	  func_emit_wrapper_part2_arg1=$1
+-	fi
+-
+-	$ECHO "\
+ 
+   # Usually 'no', except on cygwin/mingw when embedded into
+   # the cwrapper.
+-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
++  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+     # special case for '.'
+     if test \"\$thisdir\" = \".\"; then
+@@ -2814,7 +4034,7 @@
+     fi
+     # remove .libs from thisdir
+     case \"\$thisdir\" in
+-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
++    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+     $objdir )   thisdir=. ;;
+     esac
+   fi
+@@ -2869,6 +4089,18 @@
+ 
+   if test -f \"\$progdir/\$program\"; then"
+ 
++	# fixup the dll searchpath if we need to.
++	#
++	# Fix the DLL searchpath if we need to.  Do this before prepending
++	# to shlibpath, because on Windows, both are PATH and uninstalled
++	# libraries must come first.
++	if test -n "$dllsearchpath"; then
++	  $ECHO "\
++    # Add the dll search path components to the executable PATH
++    PATH=$dllsearchpath:\$PATH
++"
++	fi
++
+ 	# Export our shlibpath_var if we have one.
+ 	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ 	  $ECHO "\
+@@ -2877,253 +4109,28 @@
+ 
+     # Some systems cannot cope with colon-terminated $shlibpath_var
+     # The second colon is a workaround for a bug in BeOS R4 sed
+-    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
++    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+ 
+     export $shlibpath_var
+ "
+ 	fi
+ 
+-	# fixup the dll searchpath if we need to.
+-	if test -n "$dllsearchpath"; then
+-	  $ECHO "\
+-    # Add the dll search path components to the executable PATH
+-    PATH=$dllsearchpath:\$PATH
+-"
+-	fi
+-
+ 	$ECHO "\
+     if test \"\$libtool_execute_magic\" != \"$magic\"; then
+       # Run the actual program with our arguments.
+-"
+-	case $host in
+-	# Backslashes separate directories on plain windows
+-	*-*-mingw | *-*-os2* | *-cegcc*)
+-	  $ECHO "\
+-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+-"
+-	  ;;
+-
+-	*)
+-	  $ECHO "\
+-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+-"
+-	  ;;
+-	esac
+-	$ECHO "\
+-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+-      exit 1
++      func_exec_program \${1+\"\$@\"}
+     fi
+   else
+     # The program doesn't exist.
+     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+-    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
++    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+     exit 1
+   fi
+ fi\
+ "
+ }
+-# end: func_emit_wrapper_part2
+-
+-
+-# func_emit_wrapper [arg=no]
+-#
+-# Emit a libtool wrapper script on stdout.
+-# Don't directly open a file because we may want to
+-# incorporate the script contents within a cygwin/mingw
+-# wrapper executable.  Must ONLY be called from within
+-# func_mode_link because it depends on a number of variables
+-# set therein.
+-#
+-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+-# variable will take.  If 'yes', then the emitted script
+-# will assume that the directory in which it is stored is
+-# the $objdir directory.  This is a cygwin/mingw-specific
+-# behavior.
+-func_emit_wrapper ()
+-{
+-	func_emit_wrapper_arg1=no
+-	if test -n "$1" ; then
+-	  func_emit_wrapper_arg1=$1
+-	fi
+-
+-	# split this up so that func_emit_cwrapperexe_src
+-	# can call each part independently.
+-	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+-	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+-}
+-
+-
+-# func_to_host_path arg
+-#
+-# Convert paths to host format when used with build tools.
+-# Intended for use with "native" mingw (where libtool itself
+-# is running under the msys shell), or in the following cross-
+-# build environments:
+-#    $build          $host
+-#    mingw (msys)    mingw  [e.g. native]
+-#    cygwin          mingw
+-#    *nix + wine     mingw
+-# where wine is equipped with the `winepath' executable.
+-# In the native mingw case, the (msys) shell automatically
+-# converts paths for any non-msys applications it launches,
+-# but that facility isn't available from inside the cwrapper.
+-# Similar accommodations are necessary for $host mingw and
+-# $build cygwin.  Calling this function does no harm for other
+-# $host/$build combinations not listed above.
+-#
+-# ARG is the path (on $build) that should be converted to
+-# the proper representation for $host. The result is stored
+-# in $func_to_host_path_result.
+-func_to_host_path ()
+-{
+-  func_to_host_path_result="$1"
+-  if test -n "$1" ; then
+-    case $host in
+-      *mingw* )
+-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+-        case $build in
+-          *mingw* ) # actually, msys
+-            # awkward: cmd appends spaces to result
+-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+-            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+-              $SED -e "$lt_sed_naive_backslashify"`
+-            ;;
+-          *cygwin* )
+-            func_to_host_path_tmp1=`cygpath -w "$1"`
+-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+-              $SED -e "$lt_sed_naive_backslashify"`
+-            ;;
+-          * )
+-            # Unfortunately, winepath does not exit with a non-zero
+-            # error code, so we are forced to check the contents of
+-            # stdout. On the other hand, if the command is not
+-            # found, the shell will set an exit code of 127 and print
+-            # *an error message* to stdout. So we must check for both
+-            # error code of zero AND non-empty stdout, which explains
+-            # the odd construction:
+-            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+-            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+-              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+-                $SED -e "$lt_sed_naive_backslashify"`
+-            else
+-              # Allow warning below.
+-              func_to_host_path_result=""
+-            fi
+-            ;;
+-        esac
+-        if test -z "$func_to_host_path_result" ; then
+-          #func_error "Could not determine host path corresponding to"
+-          #func_error "  '$1'"
+-          #func_error "Continuing, but uninstalled executables may not work."
+-          # Fallback:
+-          func_to_host_path_result="$1"
+-        fi
+-        ;;
+-    esac
+-  fi
+-}
+-# end: func_to_host_path
+ 
+-# func_to_host_pathlist arg
+-#
+-# Convert pathlists to host format when used with build tools.
+-# See func_to_host_path(), above. This function supports the
+-# following $build/$host combinations (but does no harm for
+-# combinations not listed here):
+-#    $build          $host
+-#    mingw (msys)    mingw  [e.g. native]
+-#    cygwin          mingw
+-#    *nix + wine     mingw
+-#
+-# Path separators are also converted from $build format to
+-# $host format. If ARG begins or ends with a path separator
+-# character, it is preserved (but converted to $host format)
+-# on output.
+-#
+-# ARG is a pathlist (on $build) that should be converted to
+-# the proper representation on $host. The result is stored
+-# in $func_to_host_pathlist_result.
+-func_to_host_pathlist ()
+-{
+-  func_to_host_pathlist_result="$1"
+-  if test -n "$1" ; then
+-    case $host in
+-      *mingw* )
+-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+-        # Remove leading and trailing path separator characters from
+-        # ARG. msys behavior is inconsistent here, cygpath turns them
+-        # into '.;' and ';.', and winepath ignores them completely.
+-        func_to_host_pathlist_tmp2="$1"
+-        # Once set for this call, this variable should not be
+-        # reassigned. It is used in tha fallback case.
+-        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+-          $SED -e 's|^:*||' -e 's|:*$||'`
+-        case $build in
+-          *mingw* ) # Actually, msys.
+-            # Awkward: cmd appends spaces to result.
+-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+-            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+-              $SED -e "$lt_sed_naive_backslashify"`
+-            ;;
+-          *cygwin* )
+-            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+-              $SED -e "$lt_sed_naive_backslashify"`
+-            ;;
+-          * )
+-            # unfortunately, winepath doesn't convert pathlists
+-            func_to_host_pathlist_result=""
+-            func_to_host_pathlist_oldIFS=$IFS
+-            IFS=:
+-            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+-              IFS=$func_to_host_pathlist_oldIFS
+-              if test -n "$func_to_host_pathlist_f" ; then
+-                func_to_host_path "$func_to_host_pathlist_f"
+-                if test -n "$func_to_host_path_result" ; then
+-                  if test -z "$func_to_host_pathlist_result" ; then
+-                    func_to_host_pathlist_result="$func_to_host_path_result"
+-                  else
+-                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+-                  fi
+-                fi
+-              fi
+-              IFS=:
+-            done
+-            IFS=$func_to_host_pathlist_oldIFS
+-            ;;
+-        esac
+-        if test -z "$func_to_host_pathlist_result" ; then
+-          func_error "Could not determine the host path(s) corresponding to"
+-          func_error "  '$1'"
+-          func_error "Continuing, but uninstalled executables may not work."
+-          # Fallback. This may break if $1 contains DOS-style drive
+-          # specifications. The fix is not to complicate the expression
+-          # below, but for the user to provide a working wine installation
+-          # with winepath so that path translation in the cross-to-mingw
+-          # case works properly.
+-          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+-          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+-            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+-        fi
+-        # Now, add the leading and trailing path separators back
+-        case "$1" in
+-          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+-            ;;
+-        esac
+-        case "$1" in
+-          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+-            ;;
+-        esac
+-        ;;
+-    esac
+-  fi
+-}
+-# end: func_to_host_pathlist
+ 
+ # func_emit_cwrapperexe_src
+ # emit the source code for a wrapper executable on stdout
+@@ -3141,31 +4148,23 @@
+ 
+    This wrapper executable should never be moved out of the build directory.
+    If it is, it will not operate correctly.
+-
+-   Currently, it simply execs the wrapper *script* "$SHELL $output",
+-   but could eventually absorb all of the scripts functionality and
+-   exec $objdir/$outputname directly.
+ */
+ EOF
+ 	    cat <<"EOF"
++#ifdef _MSC_VER
++# define _CRT_SECURE_NO_DEPRECATE 1
++#endif
+ #include <stdio.h>
+ #include <stdlib.h>
+ #ifdef _MSC_VER
+ # include <direct.h>
+ # include <process.h>
+ # include <io.h>
+-# define setmode _setmode
+ #else
+ # include <unistd.h>
+ # include <stdint.h>
+ # ifdef __CYGWIN__
+ #  include <io.h>
+-#  define HAVE_SETENV
+-#  ifdef __STRICT_ANSI__
+-char *realpath (const char *, char *);
+-int putenv (char *);
+-int setenv (const char *, const char *, int);
+-#  endif
+ # endif
+ #endif
+ #include <malloc.h>
+@@ -3177,6 +4176,44 @@
+ #include <fcntl.h>
+ #include <sys/stat.h>
+ 
++/* declarations of non-ANSI functions */
++#if defined(__MINGW32__)
++# ifdef __STRICT_ANSI__
++int _putenv (const char *);
++# endif
++#elif defined(__CYGWIN__)
++# ifdef __STRICT_ANSI__
++char *realpath (const char *, char *);
++int putenv (char *);
++int setenv (const char *, const char *, int);
++# endif
++/* #elif defined (other platforms) ... */
++#endif
++
++/* portability defines, excluding path handling macros */
++#if defined(_MSC_VER)
++# define setmode _setmode
++# define stat    _stat
++# define chmod   _chmod
++# define getcwd  _getcwd
++# define putenv  _putenv
++# define S_IXUSR _S_IEXEC
++# ifndef _INTPTR_T_DEFINED
++#  define _INTPTR_T_DEFINED
++#  define intptr_t int
++# endif
++#elif defined(__MINGW32__)
++# define setmode _setmode
++# define stat    _stat
++# define chmod   _chmod
++# define getcwd  _getcwd
++# define putenv  _putenv
++#elif defined(__CYGWIN__)
++# define HAVE_SETENV
++# define FOPEN_WB "wb"
++/* #elif defined (other platforms) ... */
++#endif
++
+ #if defined(PATH_MAX)
+ # define LT_PATHMAX PATH_MAX
+ #elif defined(MAXPATHLEN)
+@@ -3192,14 +4229,7 @@
+ # define S_IXGRP 0
+ #endif
+ 
+-#ifdef _MSC_VER
+-# define S_IXUSR _S_IEXEC
+-# define stat _stat
+-# ifndef _INTPTR_T_DEFINED
+-#  define intptr_t int
+-# endif
+-#endif
+-
++/* path handling portability macros */
+ #ifndef DIR_SEPARATOR
+ # define DIR_SEPARATOR '/'
+ # define PATH_SEPARATOR ':'
+@@ -3230,10 +4260,6 @@
+ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+ #endif /* PATH_SEPARATOR_2 */
+ 
+-#ifdef __CYGWIN__
+-# define FOPEN_WB "wb"
+-#endif
+-
+ #ifndef FOPEN_WB
+ # define FOPEN_WB "w"
+ #endif
+@@ -3246,22 +4272,13 @@
+   if (stale) { free ((void *) stale); stale = 0; } \
+ } while (0)
+ 
+-#undef LTWRAPPER_DEBUGPRINTF
+-#if defined DEBUGWRAPPER
+-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+-static void
+-ltwrapper_debugprintf (const char *fmt, ...)
+-{
+-    va_list args;
+-    va_start (args, fmt);
+-    (void) vfprintf (stderr, fmt, args);
+-    va_end (args);
+-}
++#if defined(LT_DEBUGWRAPPER)
++static int lt_debug = 1;
+ #else
+-# define LTWRAPPER_DEBUGPRINTF(args)
++static int lt_debug = 0;
+ #endif
+ 
+-const char *program_name = NULL;
++const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+ 
+ void *xmalloc (size_t num);
+ char *xstrdup (const char *string);
+@@ -3271,41 +4288,27 @@
+ int make_executable (const char *path);
+ int check_executable (const char *path);
+ char *strendzap (char *str, const char *pat);
+-void lt_fatal (const char *message, ...);
++void lt_debugprintf (const char *file, int line, const char *fmt, ...);
++void lt_fatal (const char *file, int line, const char *message, ...);
++static const char *nonnull (const char *s);
++static const char *nonempty (const char *s);
+ void lt_setenv (const char *name, const char *value);
+ char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+-void lt_opt_process_env_set (const char *arg);
+-void lt_opt_process_env_prepend (const char *arg);
+-void lt_opt_process_env_append (const char *arg);
+-int lt_split_name_value (const char *arg, char** name, char** value);
+ void lt_update_exe_path (const char *name, const char *value);
+ void lt_update_lib_path (const char *name, const char *value);
+-
+-static const char *script_text_part1 =
+-EOF
+-
+-	    func_emit_wrapper_part1 yes |
+-	        $SED -e 's/\([\\"]\)/\\\1/g' \
+-	             -e 's/^/  "/' -e 's/$/\\n"/'
+-	    echo ";"
+-	    cat <<EOF
+-
+-static const char *script_text_part2 =
++char **prepare_spawn (char **argv);
++void lt_dump_script (FILE *f);
+ EOF
+-	    func_emit_wrapper_part2 yes |
+-	        $SED -e 's/\([\\"]\)/\\\1/g' \
+-	             -e 's/^/  "/' -e 's/$/\\n"/'
+-	    echo ";"
+ 
+ 	    cat <<EOF
+-const char * MAGIC_EXE = "$magic_exe";
++volatile const char * MAGIC_EXE = "$magic_exe";
+ const char * LIB_PATH_VARNAME = "$shlibpath_var";
+ EOF
+ 
+ 	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+-              func_to_host_pathlist "$temp_rpath"
++              func_to_host_path "$temp_rpath"
+ 	      cat <<EOF
+-const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
++const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+ EOF
+ 	    else
+ 	      cat <<"EOF"
+@@ -3314,10 +4317,10 @@
+ 	    fi
+ 
+ 	    if test -n "$dllsearchpath"; then
+-              func_to_host_pathlist "$dllsearchpath:"
++              func_to_host_path "$dllsearchpath:"
+ 	      cat <<EOF
+ const char * EXE_PATH_VARNAME = "PATH";
+-const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
++const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+ EOF
+ 	    else
+ 	      cat <<"EOF"
+@@ -3340,26 +4343,11 @@
+ 	    cat <<"EOF"
+ 
+ #define LTWRAPPER_OPTION_PREFIX         "--lt-"
+-#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
+ 
+-static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+ static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+-
+ static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
++static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+ 
+-static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+-static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+-  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+-
+-static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+-static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+-  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+-
+-static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+-static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+-  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+-
+-#undef main
+ int
+ main (int argc, char *argv[])
+ {
+@@ -3375,10 +4363,13 @@
+   int i;
+ 
+   program_name = (char *) xstrdup (base_name (argv[0]));
+-  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+-  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
++  newargz = XMALLOC (char *, argc + 1);
+ 
+-  /* very simple arg parsing; don't want to rely on getopt */
++  /* very simple arg parsing; don't want to rely on getopt
++   * also, copy all non cwrapper options to newargz, except
++   * argz[0], which is handled differently
++   */
++  newargc=0;
+   for (i = 1; i < argc; i++)
+     {
+       if (strcmp (argv[i], dumpscript_opt) == 0)
+@@ -3392,25 +4383,57 @@
+ 	      esac
+ 
+ 	    cat <<"EOF"
+-	  printf ("%s", script_text_part1);
+-	  printf ("%s", script_text_part2);
++	  lt_dump_script (stdout);
+ 	  return 0;
+ 	}
++      if (strcmp (argv[i], debug_opt) == 0)
++	{
++          lt_debug = 1;
++          continue;
++	}
++      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
++        {
++          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
++             namespace, but it is not one of the ones we know about and
++             have already dealt with, above (inluding dump-script), then
++             report an error. Otherwise, targets might begin to believe
++             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
++             namespace. The first time any user complains about this, we'll
++             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
++             or a configure.ac-settable value.
++           */
++          lt_fatal (__FILE__, __LINE__,
++		    "unrecognized %s option: '%s'",
++                    ltwrapper_option_prefix, argv[i]);
++        }
++      /* otherwise ... */
++      newargz[++newargc] = xstrdup (argv[i]);
+     }
++  newargz[++newargc] = NULL;
++
++EOF
++	    cat <<EOF
++  /* The GNU banner must be the first non-error debug message */
++  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
++EOF
++	    cat <<"EOF"
++  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
++  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+ 
+-  newargz = XMALLOC (char *, argc + 1);
+   tmp_pathspec = find_executable (argv[0]);
+   if (tmp_pathspec == NULL)
+-    lt_fatal ("Couldn't find %s", argv[0]);
+-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+-			  tmp_pathspec));
++    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
++  lt_debugprintf (__FILE__, __LINE__,
++                  "(main) found exe (before symlink chase) at: %s\n",
++		  tmp_pathspec);
+ 
+   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+-			  actual_cwrapper_path));
++  lt_debugprintf (__FILE__, __LINE__,
++                  "(main) found exe (after symlink chase) at: %s\n",
++		  actual_cwrapper_path);
+   XFREE (tmp_pathspec);
+ 
+-  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
++  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+   strendzap (actual_cwrapper_path, actual_cwrapper_name);
+ 
+   /* wrapper name transforms */
+@@ -3428,8 +4451,9 @@
+   target_name = tmp_pathspec;
+   tmp_pathspec = 0;
+ 
+-  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+-			  target_name));
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(main) libtool target name: %s\n",
++		  target_name);
+ EOF
+ 
+ 	    cat <<EOF
+@@ -3479,80 +4503,19 @@
+ 
+   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+-  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
++  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
++     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
++     because on Windows, both *_VARNAMEs are PATH but uninstalled
++     libraries must come first. */
+   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
++  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+ 
+-  newargc=0;
+-  for (i = 1; i < argc; i++)
+-    {
+-      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+-        {
+-          if (argv[i][env_set_opt_len] == '=')
+-            {
+-              const char *p = argv[i] + env_set_opt_len + 1;
+-              lt_opt_process_env_set (p);
+-            }
+-          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+-            {
+-              lt_opt_process_env_set (argv[++i]); /* don't copy */
+-            }
+-          else
+-            lt_fatal ("%s missing required argument", env_set_opt);
+-          continue;
+-        }
+-      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+-        {
+-          if (argv[i][env_prepend_opt_len] == '=')
+-            {
+-              const char *p = argv[i] + env_prepend_opt_len + 1;
+-              lt_opt_process_env_prepend (p);
+-            }
+-          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+-            {
+-              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+-            }
+-          else
+-            lt_fatal ("%s missing required argument", env_prepend_opt);
+-          continue;
+-        }
+-      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+-        {
+-          if (argv[i][env_append_opt_len] == '=')
+-            {
+-              const char *p = argv[i] + env_append_opt_len + 1;
+-              lt_opt_process_env_append (p);
+-            }
+-          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+-            {
+-              lt_opt_process_env_append (argv[++i]); /* don't copy */
+-            }
+-          else
+-            lt_fatal ("%s missing required argument", env_append_opt);
+-          continue;
+-        }
+-      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+-        {
+-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+-             namespace, but it is not one of the ones we know about and
+-             have already dealt with, above (inluding dump-script), then
+-             report an error. Otherwise, targets might begin to believe
+-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+-             namespace. The first time any user complains about this, we'll
+-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+-             or a configure.ac-settable value.
+-           */
+-          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+-                    ltwrapper_option_prefix, argv[i]);
+-        }
+-      /* otherwise ... */
+-      newargz[++newargc] = xstrdup (argv[i]);
+-    }
+-  newargz[++newargc] = NULL;
+-
+-  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
++  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
++		  nonnull (lt_argv_zero));
+   for (i = 0; i < newargc; i++)
+     {
+-      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
++      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
++		      i, nonnull (newargz[i]));
+     }
+ 
+ EOF
+@@ -3561,11 +4524,14 @@
+ 	      mingw*)
+ 		cat <<"EOF"
+   /* execv doesn't actually work on mingw as expected on unix */
++  newargz = prepare_spawn (newargz);
+   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+   if (rval == -1)
+     {
+       /* failed to start process */
+-      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
++      lt_debugprintf (__FILE__, __LINE__,
++		      "(main) failed to launch target \"%s\": %s\n",
++		      lt_argv_zero, nonnull (strerror (errno)));
+       return 127;
+     }
+   return rval;
+@@ -3587,7 +4553,7 @@
+ {
+   void *p = (void *) malloc (num);
+   if (!p)
+-    lt_fatal ("Memory exhausted");
++    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+ 
+   return p;
+ }
+@@ -3621,8 +4587,8 @@
+ {
+   struct stat st;
+ 
+-  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
++  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
++                  nonempty (path));
+   if ((!path) || (!*path))
+     return 0;
+ 
+@@ -3639,8 +4605,8 @@
+   int rval = 0;
+   struct stat st;
+ 
+-  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
++  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
++                  nonempty (path));
+   if ((!path) || (!*path))
+     return 0;
+ 
+@@ -3666,8 +4632,8 @@
+   int tmp_len;
+   char *concat_name;
+ 
+-  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+-			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
++  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
++                  nonempty (wrapper));
+ 
+   if ((wrapper == NULL) || (*wrapper == '\0'))
+     return NULL;
+@@ -3720,7 +4686,8 @@
+ 		{
+ 		  /* empty path: current directory */
+ 		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+-		    lt_fatal ("getcwd failed");
++		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++                              nonnull (strerror (errno)));
+ 		  tmp_len = strlen (tmp);
+ 		  concat_name =
+ 		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+@@ -3745,7 +4712,8 @@
+     }
+   /* Relative path | not found in path: prepend cwd */
+   if (getcwd (tmp, LT_PATHMAX) == NULL)
+-    lt_fatal ("getcwd failed");
++    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++              nonnull (strerror (errno)));
+   tmp_len = strlen (tmp);
+   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+   memcpy (concat_name, tmp, tmp_len);
+@@ -3771,8 +4739,9 @@
+   int has_symlinks = 0;
+   while (strlen (tmp_pathspec) && !has_symlinks)
+     {
+-      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+-			      tmp_pathspec));
++      lt_debugprintf (__FILE__, __LINE__,
++		      "checking path component for symlinks: %s\n",
++		      tmp_pathspec);
+       if (lstat (tmp_pathspec, &s) == 0)
+ 	{
+ 	  if (S_ISLNK (s.st_mode) != 0)
+@@ -3794,8 +4763,9 @@
+ 	}
+       else
+ 	{
+-	  char *errstr = strerror (errno);
+-	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
++	  lt_fatal (__FILE__, __LINE__,
++		    "error accessing file \"%s\": %s",
++		    tmp_pathspec, nonnull (strerror (errno)));
+ 	}
+     }
+   XFREE (tmp_pathspec);
+@@ -3808,7 +4778,8 @@
+   tmp_pathspec = realpath (pathspec, buf);
+   if (tmp_pathspec == 0)
+     {
+-      lt_fatal ("Could not follow symlinks for %s", pathspec);
++      lt_fatal (__FILE__, __LINE__,
++		"could not follow symlinks for %s", pathspec);
+     }
+   return xstrdup (tmp_pathspec);
+ #endif
+@@ -3834,11 +4805,25 @@
+   return str;
+ }
+ 
++void
++lt_debugprintf (const char *file, int line, const char *fmt, ...)
++{
++  va_list args;
++  if (lt_debug)
++    {
++      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
++      va_start (args, fmt);
++      (void) vfprintf (stderr, fmt, args);
++      va_end (args);
++    }
++}
++
+ static void
+-lt_error_core (int exit_status, const char *mode,
++lt_error_core (int exit_status, const char *file,
++	       int line, const char *mode,
+ 	       const char *message, va_list ap)
+ {
+-  fprintf (stderr, "%s: %s: ", program_name, mode);
++  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+   vfprintf (stderr, message, ap);
+   fprintf (stderr, ".\n");
+ 
+@@ -3847,20 +4832,32 @@
+ }
+ 
+ void
+-lt_fatal (const char *message, ...)
++lt_fatal (const char *file, int line, const char *message, ...)
+ {
+   va_list ap;
+   va_start (ap, message);
+-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
++  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+   va_end (ap);
+ }
+ 
++static const char *
++nonnull (const char *s)
++{
++  return s ? s : "(null)";
++}
++
++static const char *
++nonempty (const char *s)
++{
++  return (s && !*s) ? "(empty)" : nonnull (s);
++}
++
+ void
+ lt_setenv (const char *name, const char *value)
+ {
+-  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+-                          (name ? name : "<NULL>"),
+-                          (value ? value : "<NULL>")));
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_setenv) setting '%s' to '%s'\n",
++                  nonnull (name), nonnull (value));
+   {
+ #ifdef HAVE_SETENV
+     /* always make a copy, for consistency with !HAVE_SETENV */
+@@ -3905,95 +4902,12 @@
+   return new_value;
+ }
+ 
+-int
+-lt_split_name_value (const char *arg, char** name, char** value)
+-{
+-  const char *p;
+-  int len;
+-  if (!arg || !*arg)
+-    return 1;
+-
+-  p = strchr (arg, (int)'=');
+-
+-  if (!p)
+-    return 1;
+-
+-  *value = xstrdup (++p);
+-
+-  len = strlen (arg) - strlen (*value);
+-  *name = XMALLOC (char, len);
+-  strncpy (*name, arg, len-1);
+-  (*name)[len - 1] = '\0';
+-
+-  return 0;
+-}
+-
+-void
+-lt_opt_process_env_set (const char *arg)
+-{
+-  char *name = NULL;
+-  char *value = NULL;
+-
+-  if (lt_split_name_value (arg, &name, &value) != 0)
+-    {
+-      XFREE (name);
+-      XFREE (value);
+-      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+-    }
+-
+-  lt_setenv (name, value);
+-  XFREE (name);
+-  XFREE (value);
+-}
+-
+-void
+-lt_opt_process_env_prepend (const char *arg)
+-{
+-  char *name = NULL;
+-  char *value = NULL;
+-  char *new_value = NULL;
+-
+-  if (lt_split_name_value (arg, &name, &value) != 0)
+-    {
+-      XFREE (name);
+-      XFREE (value);
+-      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+-    }
+-
+-  new_value = lt_extend_str (getenv (name), value, 0);
+-  lt_setenv (name, new_value);
+-  XFREE (new_value);
+-  XFREE (name);
+-  XFREE (value);
+-}
+-
+-void
+-lt_opt_process_env_append (const char *arg)
+-{
+-  char *name = NULL;
+-  char *value = NULL;
+-  char *new_value = NULL;
+-
+-  if (lt_split_name_value (arg, &name, &value) != 0)
+-    {
+-      XFREE (name);
+-      XFREE (value);
+-      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+-    }
+-
+-  new_value = lt_extend_str (getenv (name), value, 1);
+-  lt_setenv (name, new_value);
+-  XFREE (new_value);
+-  XFREE (name);
+-  XFREE (value);
+-}
+-
+ void
+ lt_update_exe_path (const char *name, const char *value)
+ {
+-  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+-                          (name ? name : "<NULL>"),
+-                          (value ? value : "<NULL>")));
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
++                  nonnull (name), nonnull (value));
+ 
+   if (name && *name && value && *value)
+     {
+@@ -4012,9 +4926,9 @@
+ void
+ lt_update_lib_path (const char *name, const char *value)
+ {
+-  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+-                          (name ? name : "<NULL>"),
+-                          (value ? value : "<NULL>")));
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
++                  nonnull (name), nonnull (value));
+ 
+   if (name && *name && value && *value)
+     {
+@@ -4024,11 +4938,152 @@
+     }
+ }
+ 
++EOF
++	    case $host_os in
++	      mingw*)
++		cat <<"EOF"
++
++/* Prepares an argument vector before calling spawn().
++   Note that spawn() does not by itself call the command interpreter
++     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
++      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
++         GetVersionEx(&v);
++         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
++      }) ? "cmd.exe" : "command.com").
++   Instead it simply concatenates the arguments, separated by ' ', and calls
++   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
++   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
++   special way:
++   - Space and tab are interpreted as delimiters. They are not treated as
++     delimiters if they are surrounded by double quotes: "...".
++   - Unescaped double quotes are removed from the input. Their only effect is
++     that within double quotes, space and tab are treated like normal
++     characters.
++   - Backslashes not followed by double quotes are not special.
++   - But 2*n+1 backslashes followed by a double quote become
++     n backslashes followed by a double quote (n >= 0):
++       \" -> "
++       \\\" -> \"
++       \\\\\" -> \\"
++ */
++#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
++#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
++char **
++prepare_spawn (char **argv)
++{
++  size_t argc;
++  char **new_argv;
++  size_t i;
++
++  /* Count number of arguments.  */
++  for (argc = 0; argv[argc] != NULL; argc++)
++    ;
++
++  /* Allocate new argument vector.  */
++  new_argv = XMALLOC (char *, argc + 1);
++
++  /* Put quoted arguments into the new argument vector.  */
++  for (i = 0; i < argc; i++)
++    {
++      const char *string = argv[i];
++
++      if (string[0] == '\0')
++	new_argv[i] = xstrdup ("\"\"");
++      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
++	{
++	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
++	  size_t length;
++	  unsigned int backslashes;
++	  const char *s;
++	  char *quoted_string;
++	  char *p;
++
++	  length = 0;
++	  backslashes = 0;
++	  if (quote_around)
++	    length++;
++	  for (s = string; *s != '\0'; s++)
++	    {
++	      char c = *s;
++	      if (c == '"')
++		length += backslashes + 1;
++	      length++;
++	      if (c == '\\')
++		backslashes++;
++	      else
++		backslashes = 0;
++	    }
++	  if (quote_around)
++	    length += backslashes + 1;
++
++	  quoted_string = XMALLOC (char, length + 1);
++
++	  p = quoted_string;
++	  backslashes = 0;
++	  if (quote_around)
++	    *p++ = '"';
++	  for (s = string; *s != '\0'; s++)
++	    {
++	      char c = *s;
++	      if (c == '"')
++		{
++		  unsigned int j;
++		  for (j = backslashes + 1; j > 0; j--)
++		    *p++ = '\\';
++		}
++	      *p++ = c;
++	      if (c == '\\')
++		backslashes++;
++	      else
++		backslashes = 0;
++	    }
++	  if (quote_around)
++	    {
++	      unsigned int j;
++	      for (j = backslashes; j > 0; j--)
++		*p++ = '\\';
++	      *p++ = '"';
++	    }
++	  *p = '\0';
++
++	  new_argv[i] = quoted_string;
++	}
++      else
++	new_argv[i] = (char *) string;
++    }
++  new_argv[argc] = NULL;
++
++  return new_argv;
++}
++EOF
++		;;
++	    esac
++
++            cat <<"EOF"
++void lt_dump_script (FILE* f)
++{
++EOF
++	    func_emit_wrapper yes |
++              $SED -e 's/\([\\"]\)/\\\1/g' \
++	           -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
+ 
++            cat <<"EOF"
++}
+ EOF
+ }
+ # end: func_emit_cwrapperexe_src
+ 
++# func_win32_import_lib_p ARG
++# True if ARG is an import lib, as indicated by $file_magic_cmd
++func_win32_import_lib_p ()
++{
++    $opt_debug
++    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
++    *import*) : ;;
++    *) false ;;
++    esac
++}
++
+ # func_mode_link arg...
+ func_mode_link ()
+ {
+@@ -4073,6 +5128,7 @@
+     new_inherited_linker_flags=
+ 
+     avoid_version=no
++    bindir=
+     dlfiles=
+     dlprefiles=
+     dlself=no
+@@ -4165,6 +5221,11 @@
+ 	esac
+ 
+ 	case $prev in
++	bindir)
++	  bindir="$arg"
++	  prev=
++	  continue
++	  ;;
+ 	dlfiles|dlprefiles)
+ 	  if test "$preload" = no; then
+ 	    # Add the symbol object into the linking commands.
+@@ -4196,9 +5257,9 @@
+ 	    ;;
+ 	  *)
+ 	    if test "$prev" = dlfiles; then
+-	      dlfiles="$dlfiles $arg"
++	      func_append dlfiles " $arg"
+ 	    else
+-	      dlprefiles="$dlprefiles $arg"
++	      func_append dlprefiles " $arg"
+ 	    fi
+ 	    prev=
+ 	    continue
+@@ -4222,7 +5283,7 @@
+ 	    *-*-darwin*)
+ 	      case "$deplibs " in
+ 		*" $qarg.ltframework "*) ;;
+-		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
++		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+ 		   ;;
+ 	      esac
+ 	      ;;
+@@ -4241,7 +5302,7 @@
+ 	    moreargs=
+ 	    for fil in `cat "$save_arg"`
+ 	    do
+-#	      moreargs="$moreargs $fil"
++#	      func_append moreargs " $fil"
+ 	      arg=$fil
+ 	      # A libtool-controlled object.
+ 
+@@ -4270,7 +5331,7 @@
+ 
+ 		  if test "$prev" = dlfiles; then
+ 		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+-		      dlfiles="$dlfiles $pic_object"
++		      func_append dlfiles " $pic_object"
+ 		      prev=
+ 		      continue
+ 		    else
+@@ -4282,7 +5343,7 @@
+ 		  # CHECK ME:  I think I busted this.  -Ossama
+ 		  if test "$prev" = dlprefiles; then
+ 		    # Preload the old-style object.
+-		    dlprefiles="$dlprefiles $pic_object"
++		    func_append dlprefiles " $pic_object"
+ 		    prev=
+ 		  fi
+ 
+@@ -4352,12 +5413,12 @@
+ 	  if test "$prev" = rpath; then
+ 	    case "$rpath " in
+ 	    *" $arg "*) ;;
+-	    *) rpath="$rpath $arg" ;;
++	    *) func_append rpath " $arg" ;;
+ 	    esac
+ 	  else
+ 	    case "$xrpath " in
+ 	    *" $arg "*) ;;
+-	    *) xrpath="$xrpath $arg" ;;
++	    *) func_append xrpath " $arg" ;;
+ 	    esac
+ 	  fi
+ 	  prev=
+@@ -4369,28 +5430,28 @@
+ 	  continue
+ 	  ;;
+ 	weak)
+-	  weak_libs="$weak_libs $arg"
++	  func_append weak_libs " $arg"
+ 	  prev=
+ 	  continue
+ 	  ;;
+ 	xcclinker)
+-	  linker_flags="$linker_flags $qarg"
+-	  compiler_flags="$compiler_flags $qarg"
++	  func_append linker_flags " $qarg"
++	  func_append compiler_flags " $qarg"
+ 	  prev=
+ 	  func_append compile_command " $qarg"
+ 	  func_append finalize_command " $qarg"
+ 	  continue
+ 	  ;;
+ 	xcompiler)
+-	  compiler_flags="$compiler_flags $qarg"
++	  func_append compiler_flags " $qarg"
+ 	  prev=
+ 	  func_append compile_command " $qarg"
+ 	  func_append finalize_command " $qarg"
+ 	  continue
+ 	  ;;
+ 	xlinker)
+-	  linker_flags="$linker_flags $qarg"
+-	  compiler_flags="$compiler_flags $wl$qarg"
++	  func_append linker_flags " $qarg"
++	  func_append compiler_flags " $wl$qarg"
+ 	  prev=
+ 	  func_append compile_command " $wl$qarg"
+ 	  func_append finalize_command " $wl$qarg"
+@@ -4426,6 +5487,11 @@
+ 	continue
+ 	;;
+ 
++      -bindir)
++	prev=bindir
++	continue
++	;;
++
+       -dlopen)
+ 	prev=dlfiles
+ 	continue
+@@ -4476,15 +5542,16 @@
+ 	;;
+ 
+       -L*)
+-	func_stripname '-L' '' "$arg"
+-	dir=$func_stripname_result
+-	if test -z "$dir"; then
++	func_stripname "-L" '' "$arg"
++	if test -z "$func_stripname_result"; then
+ 	  if test "$#" -gt 0; then
+ 	    func_fatal_error "require no space between \`-L' and \`$1'"
+ 	  else
+ 	    func_fatal_error "need path for \`-L' option"
+ 	  fi
+ 	fi
++	func_resolve_sysroot "$func_stripname_result"
++	dir=$func_resolve_sysroot_result
+ 	# We need an absolute path.
+ 	case $dir in
+ 	[\\/]* | [A-Za-z]:[\\/]*) ;;
+@@ -4496,24 +5563,30 @@
+ 	  ;;
+ 	esac
+ 	case "$deplibs " in
+-	*" -L$dir "*) ;;
++	*" -L$dir "* | *" $arg "*)
++	  # Will only happen for absolute or sysroot arguments
++	  ;;
+ 	*)
+-	  deplibs="$deplibs -L$dir"
+-	  lib_search_path="$lib_search_path $dir"
++	  # Preserve sysroot, but never include relative directories
++	  case $dir in
++	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
++	    *) func_append deplibs " -L$dir" ;;
++	  esac
++	  func_append lib_search_path " $dir"
+ 	  ;;
+ 	esac
+ 	case $host in
+ 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+-	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
++	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ 	  case :$dllsearchpath: in
+ 	  *":$dir:"*) ;;
+ 	  ::) dllsearchpath=$dir;;
+-	  *) dllsearchpath="$dllsearchpath:$dir";;
++	  *) func_append dllsearchpath ":$dir";;
+ 	  esac
+ 	  case :$dllsearchpath: in
+ 	  *":$testbindir:"*) ;;
+ 	  ::) dllsearchpath=$testbindir;;
+-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
++	  *) func_append dllsearchpath ":$testbindir";;
+ 	  esac
+ 	  ;;
+ 	esac
+@@ -4523,7 +5596,7 @@
+       -l*)
+ 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ 	  case $host in
+-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ 	    # These systems don't actually have a C or math library (as such)
+ 	    continue
+ 	    ;;
+@@ -4537,7 +5610,7 @@
+ 	    ;;
+ 	  *-*-rhapsody* | *-*-darwin1.[012])
+ 	    # Rhapsody C and math libraries are in the System framework
+-	    deplibs="$deplibs System.ltframework"
++	    func_append deplibs " System.ltframework"
+ 	    continue
+ 	    ;;
+ 	  *-*-sco3.2v5* | *-*-sco5v6*)
+@@ -4557,7 +5630,7 @@
+ 	   ;;
+ 	 esac
+ 	fi
+-	deplibs="$deplibs $arg"
++	func_append deplibs " $arg"
+ 	continue
+ 	;;
+ 
+@@ -4569,8 +5642,8 @@
+       # Tru64 UNIX uses -model [arg] to determine the layout of C++
+       # classes, name mangling, and exception handling.
+       # Darwin uses the -arch flag to determine output architecture.
+-      -model|-arch|-isysroot)
+-	compiler_flags="$compiler_flags $arg"
++      -model|-arch|-isysroot|--sysroot)
++	func_append compiler_flags " $arg"
+ 	func_append compile_command " $arg"
+ 	func_append finalize_command " $arg"
+ 	prev=xcompiler
+@@ -4578,12 +5651,12 @@
+ 	;;
+ 
+       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+-	compiler_flags="$compiler_flags $arg"
++	func_append compiler_flags " $arg"
+ 	func_append compile_command " $arg"
+ 	func_append finalize_command " $arg"
+ 	case "$new_inherited_linker_flags " in
+ 	    *" $arg "*) ;;
+-	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
++	    * ) func_append new_inherited_linker_flags " $arg" ;;
+ 	esac
+ 	continue
+ 	;;
+@@ -4650,13 +5723,17 @@
+ 	# We need an absolute path.
+ 	case $dir in
+ 	[\\/]* | [A-Za-z]:[\\/]*) ;;
++	=*)
++	  func_stripname '=' '' "$dir"
++	  dir=$lt_sysroot$func_stripname_result
++	  ;;
+ 	*)
+ 	  func_fatal_error "only absolute run-paths are allowed"
+ 	  ;;
+ 	esac
+ 	case "$xrpath " in
+ 	*" $dir "*) ;;
+-	*) xrpath="$xrpath $dir" ;;
++	*) func_append xrpath " $dir" ;;
+ 	esac
+ 	continue
+ 	;;
+@@ -4709,8 +5786,8 @@
+ 	for flag in $args; do
+ 	  IFS="$save_ifs"
+           func_quote_for_eval "$flag"
+-	  arg="$arg $wl$func_quote_for_eval_result"
+-	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
++	  func_append arg " $func_quote_for_eval_result"
++	  func_append compiler_flags " $func_quote_for_eval_result"
+ 	done
+ 	IFS="$save_ifs"
+ 	func_stripname ' ' '' "$arg"
+@@ -4725,9 +5802,9 @@
+ 	for flag in $args; do
+ 	  IFS="$save_ifs"
+           func_quote_for_eval "$flag"
+-	  arg="$arg $wl$func_quote_for_eval_result"
+-	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+-	  linker_flags="$linker_flags $func_quote_for_eval_result"
++	  func_append arg " $wl$func_quote_for_eval_result"
++	  func_append compiler_flags " $wl$func_quote_for_eval_result"
++	  func_append linker_flags " $func_quote_for_eval_result"
+ 	done
+ 	IFS="$save_ifs"
+ 	func_stripname ' ' '' "$arg"
+@@ -4755,23 +5832,27 @@
+ 	arg="$func_quote_for_eval_result"
+ 	;;
+ 
+-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+-      # +DA*, +DD* enable 64-bit mode on the HP compiler
+-      # -q* pass through compiler args for the IBM compiler
+-      # -m*, -t[45]*, -txscale* pass through architecture-specific
+-      # compiler args for GCC
+-      # -F/path gives path to uninstalled frameworks, gcc on darwin
+-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+-      # @file GCC response files
++      # Flags to be passed through unchanged, with rationale:
++      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
++      # -r[0-9][0-9]*        specify processor for the SGI compiler
++      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
++      # +DA*, +DD*           enable 64-bit mode for the HP compiler
++      # -q*                  compiler args for the IBM compiler
++      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
++      # -F/path              path to uninstalled frameworks, gcc on darwin
++      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
++      # @file                GCC response files
++      # -tp=*                Portland pgcc target processor selection
++      # --sysroot=*          for sysroot support
++      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
++      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
++      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+         func_quote_for_eval "$arg"
+ 	arg="$func_quote_for_eval_result"
+         func_append compile_command " $arg"
+         func_append finalize_command " $arg"
+-        compiler_flags="$compiler_flags $arg"
++        func_append compiler_flags " $arg"
+         continue
+         ;;
+ 
+@@ -4783,7 +5864,7 @@
+ 
+       *.$objext)
+ 	# A standard object.
+-	objs="$objs $arg"
++	func_append objs " $arg"
+ 	;;
+ 
+       *.lo)
+@@ -4814,7 +5895,7 @@
+ 
+ 	    if test "$prev" = dlfiles; then
+ 	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+-		dlfiles="$dlfiles $pic_object"
++		func_append dlfiles " $pic_object"
+ 		prev=
+ 		continue
+ 	      else
+@@ -4826,7 +5907,7 @@
+ 	    # CHECK ME:  I think I busted this.  -Ossama
+ 	    if test "$prev" = dlprefiles; then
+ 	      # Preload the old-style object.
+-	      dlprefiles="$dlprefiles $pic_object"
++	      func_append dlprefiles " $pic_object"
+ 	      prev=
+ 	    fi
+ 
+@@ -4871,24 +5952,25 @@
+ 
+       *.$libext)
+ 	# An archive.
+-	deplibs="$deplibs $arg"
+-	old_deplibs="$old_deplibs $arg"
++	func_append deplibs " $arg"
++	func_append old_deplibs " $arg"
+ 	continue
+ 	;;
+ 
+       *.la)
+ 	# A libtool-controlled library.
+ 
++	func_resolve_sysroot "$arg"
+ 	if test "$prev" = dlfiles; then
+ 	  # This library was specified with -dlopen.
+-	  dlfiles="$dlfiles $arg"
++	  func_append dlfiles " $func_resolve_sysroot_result"
+ 	  prev=
+ 	elif test "$prev" = dlprefiles; then
+ 	  # The library was specified with -dlpreopen.
+-	  dlprefiles="$dlprefiles $arg"
++	  func_append dlprefiles " $func_resolve_sysroot_result"
+ 	  prev=
+ 	else
+-	  deplibs="$deplibs $arg"
++	  func_append deplibs " $func_resolve_sysroot_result"
+ 	fi
+ 	continue
+ 	;;
+@@ -4926,7 +6008,7 @@
+ 
+     if test -n "$shlibpath_var"; then
+       # get the directories listed in $shlibpath_var
+-      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
++      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+     else
+       shlib_search_path=
+     fi
+@@ -4935,6 +6017,8 @@
+ 
+     func_dirname "$output" "/" ""
+     output_objdir="$func_dirname_result$objdir"
++    func_to_tool_file "$output_objdir/"
++    tool_output_objdir=$func_to_tool_file_result
+     # Create the object directory.
+     func_mkdir_p "$output_objdir"
+ 
+@@ -4955,12 +6039,12 @@
+     # Find all interdependent deplibs by searching for libraries
+     # that are linked more than once (e.g. -la -lb -la)
+     for deplib in $deplibs; do
+-      if $opt_duplicate_deps ; then
++      if $opt_preserve_dup_deps ; then
+ 	case "$libs " in
+-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ 	esac
+       fi
+-      libs="$libs $deplib"
++      func_append libs " $deplib"
+     done
+ 
+     if test "$linkmode" = lib; then
+@@ -4973,9 +6057,9 @@
+       if $opt_duplicate_compiler_generated_deps; then
+ 	for pre_post_dep in $predeps $postdeps; do
+ 	  case "$pre_post_deps " in
+-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
++	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ 	  esac
+-	  pre_post_deps="$pre_post_deps $pre_post_dep"
++	  func_append pre_post_deps " $pre_post_dep"
+ 	done
+       fi
+       pre_post_deps=
+@@ -5042,17 +6126,19 @@
+ 	for lib in $dlprefiles; do
+ 	  # Ignore non-libtool-libs
+ 	  dependency_libs=
++	  func_resolve_sysroot "$lib"
+ 	  case $lib in
+-	  *.la)	func_source "$lib" ;;
++	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+ 	  esac
+ 
+ 	  # Collect preopened libtool deplibs, except any this library
+ 	  # has declared as weak libs
+ 	  for deplib in $dependency_libs; do
+-            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
++	    func_basename "$deplib"
++            deplib_base=$func_basename_result
+ 	    case " $weak_libs " in
+ 	    *" $deplib_base "*) ;;
+-	    *) deplibs="$deplibs $deplib" ;;
++	    *) func_append deplibs " $deplib" ;;
+ 	    esac
+ 	  done
+ 	done
+@@ -5073,11 +6159,11 @@
+ 	    compile_deplibs="$deplib $compile_deplibs"
+ 	    finalize_deplibs="$deplib $finalize_deplibs"
+ 	  else
+-	    compiler_flags="$compiler_flags $deplib"
++	    func_append compiler_flags " $deplib"
+ 	    if test "$linkmode" = lib ; then
+ 		case "$new_inherited_linker_flags " in
+ 		    *" $deplib "*) ;;
+-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
++		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+ 		esac
+ 	    fi
+ 	  fi
+@@ -5162,7 +6248,7 @@
+ 	    if test "$linkmode" = lib ; then
+ 		case "$new_inherited_linker_flags " in
+ 		    *" $deplib "*) ;;
+-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
++		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+ 		esac
+ 	    fi
+ 	  fi
+@@ -5175,7 +6261,8 @@
+ 	    test "$pass" = conv && continue
+ 	    newdependency_libs="$deplib $newdependency_libs"
+ 	    func_stripname '-L' '' "$deplib"
+-	    newlib_search_path="$newlib_search_path $func_stripname_result"
++	    func_resolve_sysroot "$func_stripname_result"
++	    func_append newlib_search_path " $func_resolve_sysroot_result"
+ 	    ;;
+ 	  prog)
+ 	    if test "$pass" = conv; then
+@@ -5189,7 +6276,8 @@
+ 	      finalize_deplibs="$deplib $finalize_deplibs"
+ 	    fi
+ 	    func_stripname '-L' '' "$deplib"
+-	    newlib_search_path="$newlib_search_path $func_stripname_result"
++	    func_resolve_sysroot "$func_stripname_result"
++	    func_append newlib_search_path " $func_resolve_sysroot_result"
+ 	    ;;
+ 	  *)
+ 	    func_warning "\`-L' is ignored for archives/objects"
+@@ -5200,17 +6288,21 @@
+ 	-R*)
+ 	  if test "$pass" = link; then
+ 	    func_stripname '-R' '' "$deplib"
+-	    dir=$func_stripname_result
++	    func_resolve_sysroot "$func_stripname_result"
++	    dir=$func_resolve_sysroot_result
+ 	    # Make sure the xrpath contains only unique directories.
+ 	    case "$xrpath " in
+ 	    *" $dir "*) ;;
+-	    *) xrpath="$xrpath $dir" ;;
++	    *) func_append xrpath " $dir" ;;
+ 	    esac
+ 	  fi
+ 	  deplibs="$deplib $deplibs"
+ 	  continue
+ 	  ;;
+-	*.la) lib="$deplib" ;;
++	*.la)
++	  func_resolve_sysroot "$deplib"
++	  lib=$func_resolve_sysroot_result
++	  ;;
+ 	*.$libext)
+ 	  if test "$pass" = conv; then
+ 	    deplibs="$deplib $deplibs"
+@@ -5228,7 +6320,7 @@
+ 		match_pattern*)
+ 		  set dummy $deplibs_check_method; shift
+ 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+-		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
++		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ 		    | $EGREP "$match_pattern_regex" > /dev/null; then
+ 		    valid_a_lib=yes
+ 		  fi
+@@ -5238,15 +6330,15 @@
+ 		;;
+ 	      esac
+ 	      if test "$valid_a_lib" != yes; then
+-		$ECHO
++		echo
+ 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+-		$ECHO "*** I have the capability to make that library automatically link in when"
+-		$ECHO "*** you link to this library.  But I can only do this if you have a"
+-		$ECHO "*** shared version of the library, which you do not appear to have"
+-		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
+-		$ECHO "*** that it is just a static archive that I should not use here."
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because the file extensions .$libext of this argument makes me believe"
++		echo "*** that it is just a static archive that I should not use here."
+ 	      else
+-		$ECHO
++		echo
+ 		$ECHO "*** Warning: Linking the shared library $output against the"
+ 		$ECHO "*** static library $deplib is not portable!"
+ 		deplibs="$deplib $deplibs"
+@@ -5273,11 +6365,11 @@
+ 	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ 	      # If there is no dlopen support or we're linking statically,
+ 	      # we need to preload.
+-	      newdlprefiles="$newdlprefiles $deplib"
++	      func_append newdlprefiles " $deplib"
+ 	      compile_deplibs="$deplib $compile_deplibs"
+ 	      finalize_deplibs="$deplib $finalize_deplibs"
+ 	    else
+-	      newdlfiles="$newdlfiles $deplib"
++	      func_append newdlfiles " $deplib"
+ 	    fi
+ 	  fi
+ 	  continue
+@@ -5319,20 +6411,20 @@
+ 
+ 	# Convert "-framework foo" to "foo.ltframework"
+ 	if test -n "$inherited_linker_flags"; then
+-	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
++	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ 	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ 	    case " $new_inherited_linker_flags " in
+ 	      *" $tmp_inherited_linker_flag "*) ;;
+-	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
++	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ 	    esac
+ 	  done
+ 	fi
+-	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ 	if test "$linkmode,$pass" = "lib,link" ||
+ 	   test "$linkmode,$pass" = "prog,scan" ||
+ 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
++	  test -n "$dlopen" && func_append dlfiles " $dlopen"
++	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ 	fi
+ 
+ 	if test "$pass" = conv; then
+@@ -5343,20 +6435,20 @@
+ 	      func_fatal_error "cannot find name of link library for \`$lib'"
+ 	    fi
+ 	    # It is a libtool convenience library, so add in its objects.
+-	    convenience="$convenience $ladir/$objdir/$old_library"
+-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
++	    func_append convenience " $ladir/$objdir/$old_library"
++	    func_append old_convenience " $ladir/$objdir/$old_library"
+ 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ 	    func_fatal_error "\`$lib' is not a convenience library"
+ 	  fi
+ 	  tmp_libs=
+ 	  for deplib in $dependency_libs; do
+ 	    deplibs="$deplib $deplibs"
+-	    if $opt_duplicate_deps ; then
++	    if $opt_preserve_dup_deps ; then
+ 	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ 	      esac
+ 	    fi
+-	    tmp_libs="$tmp_libs $deplib"
++	    func_append tmp_libs " $deplib"
+ 	  done
+ 	  continue
+ 	fi # $pass = conv
+@@ -5364,9 +6456,15 @@
+ 
+ 	# Get the name of the library we link against.
+ 	linklib=
+-	for l in $old_library $library_names; do
+-	  linklib="$l"
+-	done
++	if test -n "$old_library" &&
++	   { test "$prefer_static_libs" = yes ||
++	     test "$prefer_static_libs,$installed" = "built,no"; }; then
++	  linklib=$old_library
++	else
++	  for l in $old_library $library_names; do
++	    linklib="$l"
++	  done
++	fi
+ 	if test -z "$linklib"; then
+ 	  func_fatal_error "cannot find name of link library for \`$lib'"
+ 	fi
+@@ -5383,9 +6481,9 @@
+ 	    # statically, we need to preload.  We also need to preload any
+ 	    # dependent libraries so libltdl's deplib preloader doesn't
+ 	    # bomb out in the load deplibs phase.
+-	    dlprefiles="$dlprefiles $lib $dependency_libs"
++	    func_append dlprefiles " $lib $dependency_libs"
+ 	  else
+-	    newdlfiles="$newdlfiles $lib"
++	    func_append newdlfiles " $lib"
+ 	  fi
+ 	  continue
+ 	fi # $pass = dlopen
+@@ -5407,14 +6505,14 @@
+ 
+ 	# Find the relevant object directory and library name.
+ 	if test "X$installed" = Xyes; then
+-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ 	    func_warning "library \`$lib' was moved."
+ 	    dir="$ladir"
+ 	    absdir="$abs_ladir"
+ 	    libdir="$abs_ladir"
+ 	  else
+-	    dir="$libdir"
+-	    absdir="$libdir"
++	    dir="$lt_sysroot$libdir"
++	    absdir="$lt_sysroot$libdir"
+ 	  fi
+ 	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ 	else
+@@ -5422,12 +6520,12 @@
+ 	    dir="$ladir"
+ 	    absdir="$abs_ladir"
+ 	    # Remove this search path later
+-	    notinst_path="$notinst_path $abs_ladir"
++	    func_append notinst_path " $abs_ladir"
+ 	  else
+ 	    dir="$ladir/$objdir"
+ 	    absdir="$abs_ladir/$objdir"
+ 	    # Remove this search path later
+-	    notinst_path="$notinst_path $abs_ladir"
++	    func_append notinst_path " $abs_ladir"
+ 	  fi
+ 	fi # $installed = yes
+ 	func_stripname 'lib' '.la' "$laname"
+@@ -5438,20 +6536,46 @@
+ 	  if test -z "$libdir" && test "$linkmode" = prog; then
+ 	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ 	  fi
+-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+-	  # are required to link).
+-	  if test -n "$old_library"; then
+-	    newdlprefiles="$newdlprefiles $dir/$old_library"
+-	    # Keep a list of preopened convenience libraries to check
+-	    # that they are being used correctly in the link pass.
+-	    test -z "$libdir" && \
+-		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+-	  elif test -n "$dlname"; then
+-	    newdlprefiles="$newdlprefiles $dir/$dlname"
+-	  else
+-	    newdlprefiles="$newdlprefiles $dir/$linklib"
+-	  fi
++	  case "$host" in
++	    # special handling for platforms with PE-DLLs.
++	    *cygwin* | *mingw* | *cegcc* )
++	      # Linker will automatically link against shared library if both
++	      # static and shared are present.  Therefore, ensure we extract
++	      # symbols from the import library if a shared library is present
++	      # (otherwise, the dlopen module name will be incorrect).  We do
++	      # this by putting the import library name into $newdlprefiles.
++	      # We recover the dlopen module name by 'saving' the la file
++	      # name in a special purpose variable, and (later) extracting the
++	      # dlname from the la file.
++	      if test -n "$dlname"; then
++	        func_tr_sh "$dir/$linklib"
++	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
++	        func_append newdlprefiles " $dir/$linklib"
++	      else
++	        func_append newdlprefiles " $dir/$old_library"
++	        # Keep a list of preopened convenience libraries to check
++	        # that they are being used correctly in the link pass.
++	        test -z "$libdir" && \
++	          func_append dlpreconveniencelibs " $dir/$old_library"
++	      fi
++	    ;;
++	    * )
++	      # Prefer using a static library (so that no silly _DYNAMIC symbols
++	      # are required to link).
++	      if test -n "$old_library"; then
++	        func_append newdlprefiles " $dir/$old_library"
++	        # Keep a list of preopened convenience libraries to check
++	        # that they are being used correctly in the link pass.
++	        test -z "$libdir" && \
++	          func_append dlpreconveniencelibs " $dir/$old_library"
++	      # Otherwise, use the dlname, so that lt_dlopen finds it.
++	      elif test -n "$dlname"; then
++	        func_append newdlprefiles " $dir/$dlname"
++	      else
++	        func_append newdlprefiles " $dir/$linklib"
++	      fi
++	    ;;
++	  esac
+ 	fi # $pass = dlpreopen
+ 
+ 	if test -z "$libdir"; then
+@@ -5469,7 +6593,7 @@
+ 
+ 
+ 	if test "$linkmode" = prog && test "$pass" != link; then
+-	  newlib_search_path="$newlib_search_path $ladir"
++	  func_append newlib_search_path " $ladir"
+ 	  deplibs="$lib $deplibs"
+ 
+ 	  linkalldeplibs=no
+@@ -5482,7 +6606,8 @@
+ 	  for deplib in $dependency_libs; do
+ 	    case $deplib in
+ 	    -L*) func_stripname '-L' '' "$deplib"
+-	         newlib_search_path="$newlib_search_path $func_stripname_result"
++	         func_resolve_sysroot "$func_stripname_result"
++	         func_append newlib_search_path " $func_resolve_sysroot_result"
+ 		 ;;
+ 	    esac
+ 	    # Need to link against all dependency_libs?
+@@ -5493,12 +6618,12 @@
+ 	      # or/and link against static libraries
+ 	      newdependency_libs="$deplib $newdependency_libs"
+ 	    fi
+-	    if $opt_duplicate_deps ; then
++	    if $opt_preserve_dup_deps ; then
+ 	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ 	      esac
+ 	    fi
+-	    tmp_libs="$tmp_libs $deplib"
++	    func_append tmp_libs " $deplib"
+ 	  done # for deplib
+ 	  continue
+ 	fi # $linkmode = prog...
+@@ -5513,7 +6638,7 @@
+ 	      # Make sure the rpath contains only unique directories.
+ 	      case "$temp_rpath:" in
+ 	      *"$absdir:"*) ;;
+-	      *) temp_rpath="$temp_rpath$absdir:" ;;
++	      *) func_append temp_rpath "$absdir:" ;;
+ 	      esac
+ 	    fi
+ 
+@@ -5525,7 +6650,7 @@
+ 	    *)
+ 	      case "$compile_rpath " in
+ 	      *" $absdir "*) ;;
+-	      *) compile_rpath="$compile_rpath $absdir"
++	      *) func_append compile_rpath " $absdir" ;;
+ 	      esac
+ 	      ;;
+ 	    esac
+@@ -5534,7 +6659,7 @@
+ 	    *)
+ 	      case "$finalize_rpath " in
+ 	      *" $libdir "*) ;;
+-	      *) finalize_rpath="$finalize_rpath $libdir"
++	      *) func_append finalize_rpath " $libdir" ;;
+ 	      esac
+ 	      ;;
+ 	    esac
+@@ -5559,12 +6684,12 @@
+ 	  case $host in
+ 	  *cygwin* | *mingw* | *cegcc*)
+ 	      # No point in relinking DLLs because paths are not encoded
+-	      notinst_deplibs="$notinst_deplibs $lib"
++	      func_append notinst_deplibs " $lib"
+ 	      need_relink=no
+ 	    ;;
+ 	  *)
+ 	    if test "$installed" = no; then
+-	      notinst_deplibs="$notinst_deplibs $lib"
++	      func_append notinst_deplibs " $lib"
+ 	      need_relink=yes
+ 	    fi
+ 	    ;;
+@@ -5581,7 +6706,7 @@
+ 	    fi
+ 	  done
+ 	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+-	    $ECHO
++	    echo
+ 	    if test "$linkmode" = prog; then
+ 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ 	    else
+@@ -5599,7 +6724,7 @@
+ 	    *)
+ 	      case "$compile_rpath " in
+ 	      *" $absdir "*) ;;
+-	      *) compile_rpath="$compile_rpath $absdir"
++	      *) func_append compile_rpath " $absdir" ;;
+ 	      esac
+ 	      ;;
+ 	    esac
+@@ -5608,7 +6733,7 @@
+ 	    *)
+ 	      case "$finalize_rpath " in
+ 	      *" $libdir "*) ;;
+-	      *) finalize_rpath="$finalize_rpath $libdir"
++	      *) func_append finalize_rpath " $libdir" ;;
+ 	      esac
+ 	      ;;
+ 	    esac
+@@ -5662,7 +6787,7 @@
+ 	    linklib=$newlib
+ 	  fi # test -n "$old_archive_from_expsyms_cmds"
+ 
+-	  if test "$linkmode" = prog || test "$mode" != relink; then
++	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ 	    add_shlibpath=
+ 	    add_dir=
+ 	    add=
+@@ -5684,9 +6809,9 @@
+ 		      if test "X$dlopenmodule" != "X$lib"; then
+ 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ 			if test -z "$old_library" ; then
+-			  $ECHO
+-			  $ECHO "*** And there doesn't seem to be a static archive available"
+-			  $ECHO "*** The link will probably fail, sorry"
++			  echo
++			  echo "*** And there doesn't seem to be a static archive available"
++			  echo "*** The link will probably fail, sorry"
+ 			else
+ 			  add="$dir/$old_library"
+ 			fi
+@@ -5718,7 +6843,7 @@
+ 		if test -n "$inst_prefix_dir"; then
+ 		  case $libdir in
+ 		    [\\/]*)
+-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
++		      func_append add_dir " -L$inst_prefix_dir$libdir"
+ 		      ;;
+ 		  esac
+ 		fi
+@@ -5740,7 +6865,7 @@
+ 	    if test -n "$add_shlibpath"; then
+ 	      case :$compile_shlibpath: in
+ 	      *":$add_shlibpath:"*) ;;
+-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
++	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ 	      esac
+ 	    fi
+ 	    if test "$linkmode" = prog; then
+@@ -5754,13 +6879,13 @@
+ 		 test "$hardcode_shlibpath_var" = yes; then
+ 		case :$finalize_shlibpath: in
+ 		*":$libdir:"*) ;;
+-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++		*) func_append finalize_shlibpath "$libdir:" ;;
+ 		esac
+ 	      fi
+ 	    fi
+ 	  fi
+ 
+-	  if test "$linkmode" = prog || test "$mode" = relink; then
++	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ 	    add_shlibpath=
+ 	    add_dir=
+ 	    add=
+@@ -5774,7 +6899,7 @@
+ 	    elif test "$hardcode_shlibpath_var" = yes; then
+ 	      case :$finalize_shlibpath: in
+ 	      *":$libdir:"*) ;;
+-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++	      *) func_append finalize_shlibpath "$libdir:" ;;
+ 	      esac
+ 	      add="-l$name"
+ 	    elif test "$hardcode_automatic" = yes; then
+@@ -5785,13 +6910,11 @@
+ 		add="$libdir/$linklib"
+ 	      fi
+ 	    else
+-	      # We cannot seem to hardcode it, guess we'll fake it.
+-	      add_dir="-L$libdir"
+ 	      # Try looking first in the location we're being installed to.
+ 	      if test -n "$inst_prefix_dir"; then
+ 		case $libdir in
+ 		  [\\/]*)
+-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
++		    func_append add_dir " -L$inst_prefix_dir$libdir"
+ 		    ;;
+ 		esac
+ 	      fi
+@@ -5826,21 +6949,21 @@
+ 
+ 	    # Just print a warning and add the library to dependency_libs so
+ 	    # that the program can be linked against the static library.
+-	    $ECHO
++	    echo
+ 	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+-	    $ECHO "*** I have the capability to make that library automatically link in when"
+-	    $ECHO "*** you link to this library.  But I can only do this if you have a"
+-	    $ECHO "*** shared version of the library, which you do not appear to have."
++	    echo "*** I have the capability to make that library automatically link in when"
++	    echo "*** you link to this library.  But I can only do this if you have a"
++	    echo "*** shared version of the library, which you do not appear to have."
+ 	    if test "$module" = yes; then
+-	      $ECHO "*** But as you try to build a module library, libtool will still create "
+-	      $ECHO "*** a static module, that should work as long as the dlopening application"
+-	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
++	      echo "*** But as you try to build a module library, libtool will still create "
++	      echo "*** a static module, that should work as long as the dlopening application"
++	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ 	      if test -z "$global_symbol_pipe"; then
+-		$ECHO
+-		$ECHO "*** However, this would only work if libtool was able to extract symbol"
+-		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-		$ECHO "*** not find such a program.  So, this module is probably useless."
+-		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
++		echo
++		echo "*** However, this would only work if libtool was able to extract symbol"
++		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++		echo "*** not find such a program.  So, this module is probably useless."
++		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ 	      fi
+ 	      if test "$build_old_libs" = no; then
+ 		build_libtool_libs=module
+@@ -5868,37 +6991,46 @@
+ 	           temp_xrpath=$func_stripname_result
+ 		   case " $xrpath " in
+ 		   *" $temp_xrpath "*) ;;
+-		   *) xrpath="$xrpath $temp_xrpath";;
++		   *) func_append xrpath " $temp_xrpath";;
+ 		   esac;;
+-	      *) temp_deplibs="$temp_deplibs $libdir";;
++	      *) func_append temp_deplibs " $libdir";;
+ 	      esac
+ 	    done
+ 	    dependency_libs="$temp_deplibs"
+ 	  fi
+ 
+-	  newlib_search_path="$newlib_search_path $absdir"
++	  func_append newlib_search_path " $absdir"
+ 	  # Link against this library
+ 	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ 	  # ... and its dependency_libs
+ 	  tmp_libs=
+ 	  for deplib in $dependency_libs; do
+ 	    newdependency_libs="$deplib $newdependency_libs"
+-	    if $opt_duplicate_deps ; then
++	    case $deplib in
++              -L*) func_stripname '-L' '' "$deplib"
++                   func_resolve_sysroot "$func_stripname_result";;
++              *) func_resolve_sysroot "$deplib" ;;
++            esac
++	    if $opt_preserve_dup_deps ; then
+ 	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	      *" $func_resolve_sysroot_result "*)
++                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ 	      esac
+ 	    fi
+-	    tmp_libs="$tmp_libs $deplib"
++	    func_append tmp_libs " $func_resolve_sysroot_result"
+ 	  done
+ 
+ 	  if test "$link_all_deplibs" != no; then
+ 	    # Add the search paths of all dependency libraries
+ 	    for deplib in $dependency_libs; do
++	      path=
+ 	      case $deplib in
+ 	      -L*) path="$deplib" ;;
+ 	      *.la)
++	        func_resolve_sysroot "$deplib"
++	        deplib=$func_resolve_sysroot_result
+ 	        func_dirname "$deplib" "" "."
+-		dir="$func_dirname_result"
++		dir=$func_dirname_result
+ 		# We need an absolute path.
+ 		case $dir in
+ 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+@@ -5925,15 +7057,25 @@
+                       if test -z "$darwin_install_name"; then
+                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                       fi
+-		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+-		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
++		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
++		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ 		      path=
+ 		    fi
+ 		  fi
+ 		  ;;
+ 		*)
+-		  path="-L$absdir/$objdir"
+-		  ;;
++                  # OE sets installed=no in staging. We need to look in $objdir and $absdir,
++                  # preferring $objdir. RP 31/04/2008
++		  if test -f "$absdir/$objdir/$depdepl" ; then
++		    depdepl="$absdir/$objdir/$depdepl"
++		    path="-L$absdir/$objdir"
++		  elif test -f "$absdir/$depdepl" ; then
++		    depdepl="$absdir/$depdepl"
++		    path="-L$absdir"
++		  else
++		    path="-L$absdir/$objdir"
++		  fi
++		;;
+ 		esac
+ 		else
+ 		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+@@ -5959,7 +7101,7 @@
+ 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ 	else
+-	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ 	fi
+       fi
+       dependency_libs="$newdependency_libs"
+@@ -5976,7 +7118,7 @@
+ 	  for dir in $newlib_search_path; do
+ 	    case "$lib_search_path " in
+ 	    *" $dir "*) ;;
+-	    *) lib_search_path="$lib_search_path $dir" ;;
++	    *) func_append lib_search_path " $dir" ;;
+ 	    esac
+ 	  done
+ 	  newlib_search_path=
+@@ -6034,10 +7176,10 @@
+ 	    -L*)
+ 	      case " $tmp_libs " in
+ 	      *" $deplib "*) ;;
+-	      *) tmp_libs="$tmp_libs $deplib" ;;
++	      *) func_append tmp_libs " $deplib" ;;
+ 	      esac
+ 	      ;;
+-	    *) tmp_libs="$tmp_libs $deplib" ;;
++	    *) func_append tmp_libs " $deplib" ;;
+ 	    esac
+ 	  done
+ 	  eval $var=\"$tmp_libs\"
+@@ -6053,7 +7195,7 @@
+ 	  ;;
+ 	esac
+ 	if test -n "$i" ; then
+-	  tmp_libs="$tmp_libs $i"
++	  func_append tmp_libs " $i"
+ 	fi
+       done
+       dependency_libs=$tmp_libs
+@@ -6094,7 +7236,7 @@
+       # Now set the variables for building old libraries.
+       build_libtool_libs=no
+       oldlibs="$output"
+-      objs="$objs$old_deplibs"
++      func_append objs "$old_deplibs"
+       ;;
+ 
+     lib)
+@@ -6127,10 +7269,10 @@
+ 	if test "$deplibs_check_method" != pass_all; then
+ 	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ 	else
+-	  $ECHO
++	  echo
+ 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ 	  $ECHO "*** objects $objs is not portable!"
+-	  libobjs="$libobjs $objs"
++	  func_append libobjs " $objs"
+ 	fi
+       fi
+ 
+@@ -6195,7 +7337,7 @@
+ 	    age="$number_minor"
+ 	    revision="$number_revision"
+ 	    ;;
+-	  freebsd-aout|freebsd-elf|sunos)
++	  freebsd-aout|freebsd-elf|qnx|sunos)
+ 	    current="$number_major"
+ 	    revision="$number_minor"
+ 	    age="0"
+@@ -6328,7 +7470,7 @@
+ 	  done
+ 
+ 	  # Make executables depend on our current version.
+-	  verstring="$verstring:${current}.0"
++	  func_append verstring ":${current}.0"
+ 	  ;;
+ 
+ 	qnx)
+@@ -6396,10 +7538,10 @@
+       fi
+ 
+       func_generate_dlsyms "$libname" "$libname" "yes"
+-      libobjs="$libobjs $symfileobj"
++      func_append libobjs " $symfileobj"
+       test "X$libobjs" = "X " && libobjs=
+ 
+-      if test "$mode" != relink; then
++      if test "$opt_mode" != relink; then
+ 	# Remove our outputs, but don't remove object files since they
+ 	# may have been created when compiling PIC objects.
+ 	removelist=
+@@ -6415,7 +7557,7 @@
+ 		   continue
+ 		 fi
+ 	       fi
+-	       removelist="$removelist $p"
++	       func_append removelist " $p"
+ 	       ;;
+ 	    *) ;;
+ 	  esac
+@@ -6426,27 +7568,28 @@
+ 
+       # Now set the variables for building old libraries.
+       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
++	func_append oldlibs " $output_objdir/$libname.$libext"
+ 
+ 	# Transform .lo files to .o files.
+-	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
++	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+       fi
+ 
+       # Eliminate all temporary directories.
+       #for path in $notinst_path; do
+-      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+-      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+-      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
++      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
++      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
++      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+       #done
+ 
+       if test -n "$xrpath"; then
+ 	# If the user specified any rpath flags, then add them.
+ 	temp_xrpath=
+ 	for libdir in $xrpath; do
+-	  temp_xrpath="$temp_xrpath -R$libdir"
++	  func_replace_sysroot "$libdir"
++	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+ 	  case "$finalize_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
++	  *) func_append finalize_rpath " $libdir" ;;
+ 	  esac
+ 	done
+ 	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+@@ -6460,7 +7603,7 @@
+       for lib in $old_dlfiles; do
+ 	case " $dlprefiles $dlfiles " in
+ 	*" $lib "*) ;;
+-	*) dlfiles="$dlfiles $lib" ;;
++	*) func_append dlfiles " $lib" ;;
+ 	esac
+       done
+ 
+@@ -6470,19 +7613,19 @@
+       for lib in $old_dlprefiles; do
+ 	case "$dlprefiles " in
+ 	*" $lib "*) ;;
+-	*) dlprefiles="$dlprefiles $lib" ;;
++	*) func_append dlprefiles " $lib" ;;
+ 	esac
+       done
+ 
+       if test "$build_libtool_libs" = yes; then
+ 	if test -n "$rpath"; then
+ 	  case $host in
+-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ 	    # these systems don't actually have a c library (as such)!
+ 	    ;;
+ 	  *-*-rhapsody* | *-*-darwin1.[012])
+ 	    # Rhapsody C library is in the System framework
+-	    deplibs="$deplibs System.ltframework"
++	    func_append deplibs " System.ltframework"
+ 	    ;;
+ 	  *-*-netbsd*)
+ 	    # Don't link with libc until the a.out ld.so is fixed.
+@@ -6499,7 +7642,7 @@
+ 	  *)
+ 	    # Add libc to deplibs on all other systems if necessary.
+ 	    if test "$build_libtool_need_lc" = "yes"; then
+-	      deplibs="$deplibs -lc"
++	      func_append deplibs " -lc"
+ 	    fi
+ 	    ;;
+ 	  esac
+@@ -6548,7 +7691,7 @@
+ 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ 		  case " $predeps $postdeps " in
+ 		  *" $i "*)
+-		    newdeplibs="$newdeplibs $i"
++		    func_append newdeplibs " $i"
+ 		    i=""
+ 		    ;;
+ 		  esac
+@@ -6559,21 +7702,21 @@
+ 		  set dummy $deplib_matches; shift
+ 		  deplib_match=$1
+ 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		    newdeplibs="$newdeplibs $i"
++		    func_append newdeplibs " $i"
+ 		  else
+ 		    droppeddeps=yes
+-		    $ECHO
++		    echo
+ 		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+-		    $ECHO "*** I have the capability to make that library automatically link in when"
+-		    $ECHO "*** you link to this library.  But I can only do this if you have a"
+-		    $ECHO "*** shared version of the library, which I believe you do not have"
+-		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+-		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
++		    echo "*** I have the capability to make that library automatically link in when"
++		    echo "*** you link to this library.  But I can only do this if you have a"
++		    echo "*** shared version of the library, which I believe you do not have"
++		    echo "*** because a test_compile did reveal that the linker did not use it for"
++		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ 		  fi
+ 		fi
+ 		;;
+ 	      *)
+-		newdeplibs="$newdeplibs $i"
++		func_append newdeplibs " $i"
+ 		;;
+ 	      esac
+ 	    done
+@@ -6591,7 +7734,7 @@
+ 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ 		    case " $predeps $postdeps " in
+ 		    *" $i "*)
+-		      newdeplibs="$newdeplibs $i"
++		      func_append newdeplibs " $i"
+ 		      i=""
+ 		      ;;
+ 		    esac
+@@ -6602,29 +7745,29 @@
+ 		    set dummy $deplib_matches; shift
+ 		    deplib_match=$1
+ 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		      newdeplibs="$newdeplibs $i"
++		      func_append newdeplibs " $i"
+ 		    else
+ 		      droppeddeps=yes
+-		      $ECHO
++		      echo
+ 		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+-		      $ECHO "*** I have the capability to make that library automatically link in when"
+-		      $ECHO "*** you link to this library.  But I can only do this if you have a"
+-		      $ECHO "*** shared version of the library, which you do not appear to have"
+-		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+-		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
++		      echo "*** I have the capability to make that library automatically link in when"
++		      echo "*** you link to this library.  But I can only do this if you have a"
++		      echo "*** shared version of the library, which you do not appear to have"
++		      echo "*** because a test_compile did reveal that the linker did not use this one"
++		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ 		    fi
+ 		  fi
+ 		else
+ 		  droppeddeps=yes
+-		  $ECHO
++		  echo
+ 		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+-		  $ECHO "*** make it link in!  You will probably need to install it or some"
+-		  $ECHO "*** library that it depends on before this library will be fully"
+-		  $ECHO "*** functional.  Installing it before continuing would be even better."
++		  echo "*** make it link in!  You will probably need to install it or some"
++		  echo "*** library that it depends on before this library will be fully"
++		  echo "*** functional.  Installing it before continuing would be even better."
+ 		fi
+ 		;;
+ 	      *)
+-		newdeplibs="$newdeplibs $i"
++		func_append newdeplibs " $i"
+ 		;;
+ 	      esac
+ 	    done
+@@ -6641,15 +7784,27 @@
+ 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ 		case " $predeps $postdeps " in
+ 		*" $a_deplib "*)
+-		  newdeplibs="$newdeplibs $a_deplib"
++		  func_append newdeplibs " $a_deplib"
+ 		  a_deplib=""
+ 		  ;;
+ 		esac
+ 	      fi
+ 	      if test -n "$a_deplib" ; then
+ 		libname=`eval "\\$ECHO \"$libname_spec\""`
++		if test -n "$file_magic_glob"; then
++		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
++		else
++		  libnameglob=$libname
++		fi
++		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++		  if test "$want_nocaseglob" = yes; then
++		    shopt -s nocaseglob
++		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++		    $nocaseglob
++		  else
++		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++		  fi
+ 		  for potent_lib in $potential_libs; do
+ 		      # Follow soft links.
+ 		      if ls -lLd "$potent_lib" 2>/dev/null |
+@@ -6666,13 +7821,13 @@
+ 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ 			case $potliblink in
+ 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+-			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
++			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ 			esac
+ 		      done
+ 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ 			 $SED -e 10q |
+ 			 $EGREP "$file_magic_regex" > /dev/null; then
+-			newdeplibs="$newdeplibs $a_deplib"
++			func_append newdeplibs " $a_deplib"
+ 			a_deplib=""
+ 			break 2
+ 		      fi
+@@ -6681,12 +7836,12 @@
+ 	      fi
+ 	      if test -n "$a_deplib" ; then
+ 		droppeddeps=yes
+-		$ECHO
++		echo
+ 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+-		$ECHO "*** I have the capability to make that library automatically link in when"
+-		$ECHO "*** you link to this library.  But I can only do this if you have a"
+-		$ECHO "*** shared version of the library, which you do not appear to have"
+-		$ECHO "*** because I did check the linker path looking for a file starting"
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because I did check the linker path looking for a file starting"
+ 		if test -z "$potlib" ; then
+ 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ 		else
+@@ -6697,7 +7852,7 @@
+ 	      ;;
+ 	    *)
+ 	      # Add a -L argument.
+-	      newdeplibs="$newdeplibs $a_deplib"
++	      func_append newdeplibs " $a_deplib"
+ 	      ;;
+ 	    esac
+ 	  done # Gone through all deplibs.
+@@ -6713,7 +7868,7 @@
+ 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ 		case " $predeps $postdeps " in
+ 		*" $a_deplib "*)
+-		  newdeplibs="$newdeplibs $a_deplib"
++		  func_append newdeplibs " $a_deplib"
+ 		  a_deplib=""
+ 		  ;;
+ 		esac
+@@ -6724,9 +7879,9 @@
+ 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ 		  for potent_lib in $potential_libs; do
+ 		    potlib="$potent_lib" # see symlink-check above in file_magic test
+-		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
++		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ 		       $EGREP "$match_pattern_regex" > /dev/null; then
+-		      newdeplibs="$newdeplibs $a_deplib"
++		      func_append newdeplibs " $a_deplib"
+ 		      a_deplib=""
+ 		      break 2
+ 		    fi
+@@ -6735,12 +7890,12 @@
+ 	      fi
+ 	      if test -n "$a_deplib" ; then
+ 		droppeddeps=yes
+-		$ECHO
++		echo
+ 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+-		$ECHO "*** I have the capability to make that library automatically link in when"
+-		$ECHO "*** you link to this library.  But I can only do this if you have a"
+-		$ECHO "*** shared version of the library, which you do not appear to have"
+-		$ECHO "*** because I did check the linker path looking for a file starting"
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because I did check the linker path looking for a file starting"
+ 		if test -z "$potlib" ; then
+ 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ 		else
+@@ -6751,32 +7906,32 @@
+ 	      ;;
+ 	    *)
+ 	      # Add a -L argument.
+-	      newdeplibs="$newdeplibs $a_deplib"
++	      func_append newdeplibs " $a_deplib"
+ 	      ;;
+ 	    esac
+ 	  done # Gone through all deplibs.
+ 	  ;;
+ 	none | unknown | *)
+ 	  newdeplibs=""
+-	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+-	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
++	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ 	    for i in $predeps $postdeps ; do
+ 	      # can't use Xsed below, because $i might contain '/'
+-	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
++	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ 	    done
+ 	  fi
+-	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
+-	     $GREP . >/dev/null; then
+-	    $ECHO
++	  case $tmp_deplibs in
++	  *[!\	\ ]*)
++	    echo
+ 	    if test "X$deplibs_check_method" = "Xnone"; then
+-	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
++	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+ 	    else
+-	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
++	      echo "*** Warning: inter-library dependencies are not known to be supported."
+ 	    fi
+-	    $ECHO "*** All declared inter-library dependencies are being dropped."
++	    echo "*** All declared inter-library dependencies are being dropped."
+ 	    droppeddeps=yes
+-	  fi
++	    ;;
++	  esac
+ 	  ;;
+ 	esac
+ 	versuffix=$versuffix_save
+@@ -6788,23 +7943,23 @@
+ 	case $host in
+ 	*-*-rhapsody* | *-*-darwin1.[012])
+ 	  # On Rhapsody replace the C library with the System framework
+-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
++	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ 	  ;;
+ 	esac
+ 
+ 	if test "$droppeddeps" = yes; then
+ 	  if test "$module" = yes; then
+-	    $ECHO
+-	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
++	    echo
++	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+ 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+-	    $ECHO "*** a static module, that should work as long as the dlopening"
+-	    $ECHO "*** application is linked with the -dlopen flag."
++	    echo "*** a static module, that should work as long as the dlopening"
++	    echo "*** application is linked with the -dlopen flag."
+ 	    if test -z "$global_symbol_pipe"; then
+-	      $ECHO
+-	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
+-	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-	      $ECHO "*** not find such a program.  So, this module is probably useless."
+-	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
++	      echo
++	      echo "*** However, this would only work if libtool was able to extract symbol"
++	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++	      echo "*** not find such a program.  So, this module is probably useless."
++	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ 	    fi
+ 	    if test "$build_old_libs" = no; then
+ 	      oldlibs="$output_objdir/$libname.$libext"
+@@ -6814,16 +7969,16 @@
+ 	      build_libtool_libs=no
+ 	    fi
+ 	  else
+-	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
+-	    $ECHO "*** automatically added whenever a program is linked with this library"
+-	    $ECHO "*** or is declared to -dlopen it."
++	    echo "*** The inter-library dependencies that have been dropped here will be"
++	    echo "*** automatically added whenever a program is linked with this library"
++	    echo "*** or is declared to -dlopen it."
+ 
+ 	    if test "$allow_undefined" = no; then
+-	      $ECHO
+-	      $ECHO "*** Since this library must not contain undefined symbols,"
+-	      $ECHO "*** because either the platform does not support them or"
+-	      $ECHO "*** it was explicitly requested with -no-undefined,"
+-	      $ECHO "*** libtool will only create a static version of it."
++	      echo
++	      echo "*** Since this library must not contain undefined symbols,"
++	      echo "*** because either the platform does not support them or"
++	      echo "*** it was explicitly requested with -no-undefined,"
++	      echo "*** libtool will only create a static version of it."
+ 	      if test "$build_old_libs" = no; then
+ 		oldlibs="$output_objdir/$libname.$libext"
+ 		build_libtool_libs=module
+@@ -6840,9 +7995,9 @@
+       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+       case $host in
+ 	*-*-darwin*)
+-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ 	  ;;
+       esac
+ 
+@@ -6855,7 +8010,7 @@
+ 	*)
+ 	  case " $deplibs " in
+ 	  *" -L$path/$objdir "*)
+-	    new_libs="$new_libs -L$path/$objdir" ;;
++	    func_append new_libs " -L$path/$objdir" ;;
+ 	  esac
+ 	  ;;
+ 	esac
+@@ -6865,10 +8020,10 @@
+ 	-L*)
+ 	  case " $new_libs " in
+ 	  *" $deplib "*) ;;
+-	  *) new_libs="$new_libs $deplib" ;;
++	  *) func_append new_libs " $deplib" ;;
+ 	  esac
+ 	  ;;
+-	*) new_libs="$new_libs $deplib" ;;
++	*) func_append new_libs " $deplib" ;;
+ 	esac
+       done
+       deplibs="$new_libs"
+@@ -6885,10 +8040,12 @@
+ 	  hardcode_libdirs=
+ 	  dep_rpath=
+ 	  rpath="$finalize_rpath"
+-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
++	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ 	  for libdir in $rpath; do
+ 	    if test -n "$hardcode_libdir_flag_spec"; then
+ 	      if test -n "$hardcode_libdir_separator"; then
++		func_replace_sysroot "$libdir"
++		libdir=$func_replace_sysroot_result
+ 		if test -z "$hardcode_libdirs"; then
+ 		  hardcode_libdirs="$libdir"
+ 		else
+@@ -6897,18 +8054,18 @@
+ 		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ 		    ;;
+ 		  *)
+-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ 		    ;;
+ 		  esac
+ 		fi
+ 	      else
+ 		eval flag=\"$hardcode_libdir_flag_spec\"
+-		dep_rpath="$dep_rpath $flag"
++		func_append dep_rpath " $flag"
+ 	      fi
+ 	    elif test -n "$runpath_var"; then
+ 	      case "$perm_rpath " in
+ 	      *" $libdir "*) ;;
+-	      *) perm_rpath="$perm_rpath $libdir" ;;
++	      *) func_apped perm_rpath " $libdir" ;;
+ 	      esac
+ 	    fi
+ 	  done
+@@ -6926,7 +8083,7 @@
+ 	    # We should set the runpath_var.
+ 	    rpath=
+ 	    for dir in $perm_rpath; do
+-	      rpath="$rpath$dir:"
++	      func_append rpath "$dir:"
+ 	    done
+ 	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ 	  fi
+@@ -6934,7 +8091,7 @@
+ 	fi
+ 
+ 	shlibpath="$finalize_shlibpath"
+-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ 	if test -n "$shlibpath"; then
+ 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ 	fi
+@@ -6960,18 +8117,18 @@
+ 	linknames=
+ 	for link
+ 	do
+-	  linknames="$linknames $link"
++	  func_append linknames " $link"
+ 	done
+ 
+ 	# Use standard objects if they are pic
+-	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ 	test "X$libobjs" = "X " && libobjs=
+ 
+ 	delfiles=
+ 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ 	  export_symbols="$output_objdir/$libname.uexp"
+-	  delfiles="$delfiles $export_symbols"
++	  func_append delfiles " $export_symbols"
+ 	fi
+ 
+ 	orig_export_symbols=
+@@ -7002,13 +8159,45 @@
+ 	    $opt_dry_run || $RM $export_symbols
+ 	    cmds=$export_symbols_cmds
+ 	    save_ifs="$IFS"; IFS='~'
+-	    for cmd in $cmds; do
++	    for cmd1 in $cmds; do
+ 	      IFS="$save_ifs"
+-	      eval cmd=\"$cmd\"
+-	      func_len " $cmd"
+-	      len=$func_len_result
+-	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	      # Take the normal branch if the nm_file_list_spec branch
++	      # doesn't work or if tool conversion is not needed.
++	      case $nm_file_list_spec~$to_tool_file_cmd in
++		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
++		  try_normal_branch=yes
++		  eval cmd=\"$cmd1\"
++		  func_len " $cmd"
++		  len=$func_len_result
++		  ;;
++		*)
++		  try_normal_branch=no
++		  ;;
++	      esac
++	      if test "$try_normal_branch" = yes \
++		 && { test "$len" -lt "$max_cmd_len" \
++		      || test "$max_cmd_len" -le -1; }
++	      then
++		func_show_eval "$cmd" 'exit $?'
++		skipped_export=false
++	      elif test -n "$nm_file_list_spec"; then
++		func_basename "$output"
++		output_la=$func_basename_result
++		save_libobjs=$libobjs
++		save_output=$output
++		output=${output_objdir}/${output_la}.nm
++		func_to_tool_file "$output"
++		libobjs=$nm_file_list_spec$func_to_tool_file_result
++		func_append delfiles " $output"
++		func_verbose "creating $NM input file list: $output"
++		for obj in $save_libobjs; do
++		  func_to_tool_file "$obj"
++		  $ECHO "$func_to_tool_file_result"
++		done > "$output"
++		eval cmd=\"$cmd1\"
+ 		func_show_eval "$cmd" 'exit $?'
++		output=$save_output
++		libobjs=$save_libobjs
+ 		skipped_export=false
+ 	      else
+ 		# The command line is too long to execute in one step.
+@@ -7030,7 +8219,7 @@
+ 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ 	  tmp_export_symbols="$export_symbols"
+ 	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+-	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
++	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ 	fi
+ 
+ 	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+@@ -7042,7 +8231,7 @@
+ 	  # global variables. join(1) would be nice here, but unfortunately
+ 	  # isn't a blessed tool.
+ 	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+-	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
++	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ 	  export_symbols=$output_objdir/$libname.def
+ 	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ 	fi
+@@ -7052,7 +8241,7 @@
+ 	  case " $convenience " in
+ 	  *" $test_deplib "*) ;;
+ 	  *)
+-	    tmp_deplibs="$tmp_deplibs $test_deplib"
++	    func_append tmp_deplibs " $test_deplib"
+ 	    ;;
+ 	  esac
+ 	done
+@@ -7072,21 +8261,21 @@
+ 	    test "X$libobjs" = "X " && libobjs=
+ 	  else
+ 	    gentop="$output_objdir/${outputname}x"
+-	    generated="$generated $gentop"
++	    func_append generated " $gentop"
+ 
+ 	    func_extract_archives $gentop $convenience
+-	    libobjs="$libobjs $func_extract_archives_result"
++	    func_append libobjs " $func_extract_archives_result"
+ 	    test "X$libobjs" = "X " && libobjs=
+ 	  fi
+ 	fi
+ 
+ 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ 	  eval flag=\"$thread_safe_flag_spec\"
+-	  linker_flags="$linker_flags $flag"
++	  func_append linker_flags " $flag"
+ 	fi
+ 
+ 	# Make a backup of the uninstalled library when relinking
+-	if test "$mode" = relink; then
++	if test "$opt_mode" = relink; then
+ 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ 	fi
+ 
+@@ -7131,7 +8320,8 @@
+ 	    save_libobjs=$libobjs
+ 	  fi
+ 	  save_output=$output
+-	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
++	  func_basename "$output"
++	  output_la=$func_basename_result
+ 
+ 	  # Clear the reloadable object creation command queue and
+ 	  # initialize k to one.
+@@ -7144,13 +8334,16 @@
+ 	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ 	    output=${output_objdir}/${output_la}.lnkscript
+ 	    func_verbose "creating GNU ld script: $output"
+-	    $ECHO 'INPUT (' > $output
++	    echo 'INPUT (' > $output
+ 	    for obj in $save_libobjs
+ 	    do
+-	      $ECHO "$obj" >> $output
++	      func_to_tool_file "$obj"
++	      $ECHO "$func_to_tool_file_result" >> $output
+ 	    done
+-	    $ECHO ')' >> $output
+-	    delfiles="$delfiles $output"
++	    echo ')' >> $output
++	    func_append delfiles " $output"
++	    func_to_tool_file "$output"
++	    output=$func_to_tool_file_result
+ 	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ 	    output=${output_objdir}/${output_la}.lnk
+ 	    func_verbose "creating linker input file list: $output"
+@@ -7164,10 +8357,12 @@
+ 	    fi
+ 	    for obj
+ 	    do
+-	      $ECHO "$obj" >> $output
++	      func_to_tool_file "$obj"
++	      $ECHO "$func_to_tool_file_result" >> $output
+ 	    done
+-	    delfiles="$delfiles $output"
+-	    output=$firstobj\"$file_list_spec$output\"
++	    func_append delfiles " $output"
++	    func_to_tool_file "$output"
++	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ 	  else
+ 	    if test -n "$save_libobjs"; then
+ 	      func_verbose "creating reloadable object files..."
+@@ -7191,17 +8386,19 @@
+ 		  # command to the queue.
+ 		  if test "$k" -eq 1 ; then
+ 		    # The first file doesn't have a previous command to add.
+-		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
++		    reload_objs=$objlist
++		    eval concat_cmds=\"$reload_cmds\"
+ 		  else
+ 		    # All subsequent reloadable object files will link in
+ 		    # the last one created.
+-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
++		    reload_objs="$objlist $last_robj"
++		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ 		  fi
+ 		  last_robj=$output_objdir/$output_la-${k}.$objext
+ 		  func_arith $k + 1
+ 		  k=$func_arith_result
+ 		  output=$output_objdir/$output_la-${k}.$objext
+-		  objlist=$obj
++		  objlist=" $obj"
+ 		  func_len " $last_robj"
+ 		  func_arith $len0 + $func_len_result
+ 		  len=$func_arith_result
+@@ -7211,11 +8408,12 @@
+ 	      # reloadable object file.  All subsequent reloadable object
+ 	      # files will link in the last one created.
+ 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
++	      reload_objs="$objlist $last_robj"
++	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ 	      if test -n "$last_robj"; then
+ 	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ 	      fi
+-	      delfiles="$delfiles $output"
++	      func_append delfiles " $output"
+ 
+ 	    else
+ 	      output=
+@@ -7249,7 +8447,7 @@
+ 		lt_exit=$?
+ 
+ 		# Restore the uninstalled library and exit
+-		if test "$mode" = relink; then
++		if test "$opt_mode" = relink; then
+ 		  ( cd "$output_objdir" && \
+ 		    $RM "${realname}T" && \
+ 		    $MV "${realname}U" "$realname" )
+@@ -7270,7 +8468,7 @@
+ 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ 	      tmp_export_symbols="$export_symbols"
+ 	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+-	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
++	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ 	    fi
+ 
+ 	    if test -n "$orig_export_symbols"; then
+@@ -7282,7 +8480,7 @@
+ 	      # global variables. join(1) would be nice here, but unfortunately
+ 	      # isn't a blessed tool.
+ 	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+-	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
++	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ 	      export_symbols=$output_objdir/$libname.def
+ 	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ 	    fi
+@@ -7323,10 +8521,10 @@
+ 	# Add any objects from preloaded convenience libraries
+ 	if test -n "$dlprefiles"; then
+ 	  gentop="$output_objdir/${outputname}x"
+-	  generated="$generated $gentop"
++	  func_append generated " $gentop"
+ 
+ 	  func_extract_archives $gentop $dlprefiles
+-	  libobjs="$libobjs $func_extract_archives_result"
++	  func_append libobjs " $func_extract_archives_result"
+ 	  test "X$libobjs" = "X " && libobjs=
+ 	fi
+ 
+@@ -7342,7 +8540,7 @@
+ 	    lt_exit=$?
+ 
+ 	    # Restore the uninstalled library and exit
+-	    if test "$mode" = relink; then
++	    if test "$opt_mode" = relink; then
+ 	      ( cd "$output_objdir" && \
+ 	        $RM "${realname}T" && \
+ 		$MV "${realname}U" "$realname" )
+@@ -7354,7 +8552,7 @@
+ 	IFS="$save_ifs"
+ 
+ 	# Restore the uninstalled library and exit
+-	if test "$mode" = relink; then
++	if test "$opt_mode" = relink; then
+ 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+ 
+ 	  if test -n "$convenience"; then
+@@ -7435,18 +8633,21 @@
+       if test -n "$convenience"; then
+ 	if test -n "$whole_archive_flag_spec"; then
+ 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+-	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
++	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ 	else
+ 	  gentop="$output_objdir/${obj}x"
+-	  generated="$generated $gentop"
++	  func_append generated " $gentop"
+ 
+ 	  func_extract_archives $gentop $convenience
+ 	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+ 	fi
+       fi
+ 
++      # If we're not building shared, we need to use non_pic_objs
++      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
++
+       # Create the old-style object.
+-      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ 
+       output="$obj"
+       func_execute_cmds "$reload_cmds" 'exit $?'
+@@ -7506,8 +8707,8 @@
+       case $host in
+       *-*-rhapsody* | *-*-darwin1.[012])
+ 	# On Rhapsody replace the C library is the System framework
+-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
++	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
++	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ 	;;
+       esac
+ 
+@@ -7518,14 +8719,14 @@
+ 	if test "$tagname" = CXX ; then
+ 	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 	    10.[0123])
+-	      compile_command="$compile_command ${wl}-bind_at_load"
+-	      finalize_command="$finalize_command ${wl}-bind_at_load"
++	      func_append compile_command " ${wl}-bind_at_load"
++	      func_append finalize_command " ${wl}-bind_at_load"
+ 	    ;;
+ 	  esac
+ 	fi
+ 	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ 	;;
+       esac
+ 
+@@ -7539,7 +8740,7 @@
+ 	*)
+ 	  case " $compile_deplibs " in
+ 	  *" -L$path/$objdir "*)
+-	    new_libs="$new_libs -L$path/$objdir" ;;
++	    func_append new_libs " -L$path/$objdir" ;;
+ 	  esac
+ 	  ;;
+ 	esac
+@@ -7549,17 +8750,17 @@
+ 	-L*)
+ 	  case " $new_libs " in
+ 	  *" $deplib "*) ;;
+-	  *) new_libs="$new_libs $deplib" ;;
++	  *) func_append new_libs " $deplib" ;;
+ 	  esac
+ 	  ;;
+-	*) new_libs="$new_libs $deplib" ;;
++	*) func_append new_libs " $deplib" ;;
+ 	esac
+       done
+       compile_deplibs="$new_libs"
+ 
+ 
+-      compile_command="$compile_command $compile_deplibs"
+-      finalize_command="$finalize_command $finalize_deplibs"
++      func_append compile_command " $compile_deplibs"
++      func_append finalize_command " $finalize_deplibs"
+ 
+       if test -n "$rpath$xrpath"; then
+ 	# If the user specified any rpath flags, then add them.
+@@ -7567,7 +8768,7 @@
+ 	  # This is the magic to use -rpath.
+ 	  case "$finalize_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
++	  *) func_append finalize_rpath " $libdir" ;;
+ 	  esac
+ 	done
+       fi
+@@ -7586,18 +8787,18 @@
+ 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ 		;;
+ 	      *)
+-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ 		;;
+ 	      esac
+ 	    fi
+ 	  else
+ 	    eval flag=\"$hardcode_libdir_flag_spec\"
+-	    rpath="$rpath $flag"
++	    func_append rpath " $flag"
+ 	  fi
+ 	elif test -n "$runpath_var"; then
+ 	  case "$perm_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) perm_rpath="$perm_rpath $libdir" ;;
++	  *) func_append perm_rpath " $libdir" ;;
+ 	  esac
+ 	fi
+ 	case $host in
+@@ -7606,12 +8807,12 @@
+ 	  case :$dllsearchpath: in
+ 	  *":$libdir:"*) ;;
+ 	  ::) dllsearchpath=$libdir;;
+-	  *) dllsearchpath="$dllsearchpath:$libdir";;
++	  *) func_append dllsearchpath ":$libdir";;
+ 	  esac
+ 	  case :$dllsearchpath: in
+ 	  *":$testbindir:"*) ;;
+ 	  ::) dllsearchpath=$testbindir;;
+-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
++	  *) func_append dllsearchpath ":$testbindir";;
+ 	  esac
+ 	  ;;
+ 	esac
+@@ -7637,18 +8838,18 @@
+ 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ 		;;
+ 	      *)
+-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ 		;;
+ 	      esac
+ 	    fi
+ 	  else
+ 	    eval flag=\"$hardcode_libdir_flag_spec\"
+-	    rpath="$rpath $flag"
++	    func_append rpath " $flag"
+ 	  fi
+ 	elif test -n "$runpath_var"; then
+ 	  case "$finalize_perm_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
++	  *) func_append finalize_perm_rpath " $libdir" ;;
+ 	  esac
+ 	fi
+       done
+@@ -7662,8 +8863,8 @@
+ 
+       if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ 	# Transform all the library objects into standard objects.
+-	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
++	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+       fi
+ 
+       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+@@ -7675,15 +8876,15 @@
+ 
+       wrappers_required=yes
+       case $host in
++      *cegcc* | *mingw32ce*)
++        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
++        wrappers_required=no
++        ;;
+       *cygwin* | *mingw* )
+         if test "$build_libtool_libs" != yes; then
+           wrappers_required=no
+         fi
+         ;;
+-      *cegcc)
+-        # Disable wrappers for cegcc, we are cross compiling anyway.
+-        wrappers_required=no
+-        ;;
+       *)
+         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+           wrappers_required=no
+@@ -7692,13 +8893,19 @@
+       esac
+       if test "$wrappers_required" = no; then
+ 	# Replace the output file specification.
+-	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ 	link_command="$compile_command$compile_rpath"
+ 
+ 	# We have no uninstalled library dependencies, so finalize right now.
+ 	exit_status=0
+ 	func_show_eval "$link_command" 'exit_status=$?'
+ 
++	if test -n "$postlink_cmds"; then
++	  func_to_tool_file "$output"
++	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	  func_execute_cmds "$postlink_cmds" 'exit $?'
++	fi
++
+ 	# Delete the generated files.
+ 	if test -f "$output_objdir/${outputname}S.${objext}"; then
+ 	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+@@ -7721,7 +8928,7 @@
+ 	  # We should set the runpath_var.
+ 	  rpath=
+ 	  for dir in $perm_rpath; do
+-	    rpath="$rpath$dir:"
++	    func_append rpath "$dir:"
+ 	  done
+ 	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ 	fi
+@@ -7729,7 +8936,7 @@
+ 	  # We should set the runpath_var.
+ 	  rpath=
+ 	  for dir in $finalize_perm_rpath; do
+-	    rpath="$rpath$dir:"
++	    func_append rpath "$dir:"
+ 	  done
+ 	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ 	fi
+@@ -7739,11 +8946,18 @@
+ 	# We don't need to create a wrapper script.
+ 	link_command="$compile_var$compile_command$compile_rpath"
+ 	# Replace the output file specification.
+-	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ 	# Delete the old output file.
+ 	$opt_dry_run || $RM $output
+ 	# Link the executable and exit
+ 	func_show_eval "$link_command" 'exit $?'
++
++	if test -n "$postlink_cmds"; then
++	  func_to_tool_file "$output"
++	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	  func_execute_cmds "$postlink_cmds" 'exit $?'
++	fi
++
+ 	exit $EXIT_SUCCESS
+       fi
+ 
+@@ -7758,7 +8972,7 @@
+ 	if test "$fast_install" != no; then
+ 	  link_command="$finalize_var$compile_command$finalize_rpath"
+ 	  if test "$fast_install" = yes; then
+-	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
++	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ 	  else
+ 	    # fast_install is set to needless
+ 	    relink_command=
+@@ -7770,13 +8984,19 @@
+       fi
+ 
+       # Replace the output file specification.
+-      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
++      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ 
+       # Delete the old output files.
+       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+ 
+       func_show_eval "$link_command" 'exit $?'
+ 
++      if test -n "$postlink_cmds"; then
++	func_to_tool_file "$output_objdir/$outputname"
++	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	func_execute_cmds "$postlink_cmds" 'exit $?'
++      fi
++
+       # Now create the wrapper script.
+       func_verbose "creating $output"
+ 
+@@ -7794,18 +9014,7 @@
+ 	  fi
+ 	done
+ 	relink_command="(cd `pwd`; $relink_command)"
+-	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+-      fi
+-
+-      # Quote $ECHO for shipping.
+-      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+-	case $progpath in
+-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+-	esac
+-	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+-      else
+-	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
++	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+       fi
+ 
+       # Only actually do things if not in dry run mode.
+@@ -7885,7 +9094,7 @@
+ 	else
+ 	  oldobjs="$old_deplibs $non_pic_objects"
+ 	  if test "$preload" = yes && test -f "$symfileobj"; then
+-	    oldobjs="$oldobjs $symfileobj"
++	    func_append oldobjs " $symfileobj"
+ 	  fi
+ 	fi
+ 	addlibs="$old_convenience"
+@@ -7893,10 +9102,10 @@
+ 
+       if test -n "$addlibs"; then
+ 	gentop="$output_objdir/${outputname}x"
+-	generated="$generated $gentop"
++	func_append generated " $gentop"
+ 
+ 	func_extract_archives $gentop $addlibs
+-	oldobjs="$oldobjs $func_extract_archives_result"
++	func_append oldobjs " $func_extract_archives_result"
+       fi
+ 
+       # Do each command in the archive commands.
+@@ -7907,10 +9116,10 @@
+ 	# Add any objects from preloaded convenience libraries
+ 	if test -n "$dlprefiles"; then
+ 	  gentop="$output_objdir/${outputname}x"
+-	  generated="$generated $gentop"
++	  func_append generated " $gentop"
+ 
+ 	  func_extract_archives $gentop $dlprefiles
+-	  oldobjs="$oldobjs $func_extract_archives_result"
++	  func_append oldobjs " $func_extract_archives_result"
+ 	fi
+ 
+ 	# POSIX demands no paths to be encoded in archives.  We have
+@@ -7926,9 +9135,9 @@
+ 	    done | sort | sort -uc >/dev/null 2>&1); then
+ 	  :
+ 	else
+-	  $ECHO "copying selected object files to avoid basename conflicts..."
++	  echo "copying selected object files to avoid basename conflicts..."
+ 	  gentop="$output_objdir/${outputname}x"
+-	  generated="$generated $gentop"
++	  func_append generated " $gentop"
+ 	  func_mkdir_p "$gentop"
+ 	  save_oldobjs=$oldobjs
+ 	  oldobjs=
+@@ -7952,9 +9161,9 @@
+ 		esac
+ 	      done
+ 	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+-	      oldobjs="$oldobjs $gentop/$newobj"
++	      func_append oldobjs " $gentop/$newobj"
+ 	      ;;
+-	    *) oldobjs="$oldobjs $obj" ;;
++	    *) func_append oldobjs " $obj" ;;
+ 	    esac
+ 	  done
+ 	fi
+@@ -7964,6 +9173,16 @@
+ 	len=$func_len_result
+ 	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ 	  cmds=$old_archive_cmds
++	elif test -n "$archiver_list_spec"; then
++	  func_verbose "using command file archive linking..."
++	  for obj in $oldobjs
++	  do
++	    func_to_tool_file "$obj"
++	    $ECHO "$func_to_tool_file_result"
++	  done > $output_objdir/$libname.libcmd
++	  func_to_tool_file "$output_objdir/$libname.libcmd"
++	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
++	  cmds=$old_archive_cmds
+ 	else
+ 	  # the command line is too long to link in one step, link in parts
+ 	  func_verbose "using piecewise archive linking..."
+@@ -8037,7 +9256,7 @@
+       done
+       # Quote the link command for shipping.
+       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+-      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+       if test "$hardcode_automatic" = yes ; then
+ 	relink_command=
+       fi
+@@ -8057,12 +9276,23 @@
+ 	      *.la)
+ 		func_basename "$deplib"
+ 		name="$func_basename_result"
+-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++		func_resolve_sysroot "$deplib"
++		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ 		test -z "$libdir" && \
+ 		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+-		newdependency_libs="$newdependency_libs $libdir/$name"
++		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
++		;;
++	      -L*)
++		func_stripname -L '' "$deplib"
++		func_replace_sysroot "$func_stripname_result"
++		func_append newdependency_libs " -L$func_replace_sysroot_result"
+ 		;;
+-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
++	      -R*)
++		func_stripname -R '' "$deplib"
++		func_replace_sysroot "$func_stripname_result"
++		func_append newdependency_libs " -R$func_replace_sysroot_result"
++		;;
++	      *) func_append newdependency_libs " $deplib" ;;
+ 	      esac
+ 	    done
+ 	    dependency_libs="$newdependency_libs"
+@@ -8076,9 +9306,9 @@
+ 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ 		test -z "$libdir" && \
+ 		  func_fatal_error "\`$lib' is not a valid libtool archive"
+-		newdlfiles="$newdlfiles $libdir/$name"
++		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ 		;;
+-	      *) newdlfiles="$newdlfiles $lib" ;;
++	      *) func_append newdlfiles " $lib" ;;
+ 	      esac
+ 	    done
+ 	    dlfiles="$newdlfiles"
+@@ -8095,7 +9325,7 @@
+ 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ 		test -z "$libdir" && \
+ 		  func_fatal_error "\`$lib' is not a valid libtool archive"
+-		newdlprefiles="$newdlprefiles $libdir/$name"
++		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ 		;;
+ 	      esac
+ 	    done
+@@ -8107,7 +9337,7 @@
+ 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ 		*) abs=`pwd`"/$lib" ;;
+ 	      esac
+-	      newdlfiles="$newdlfiles $abs"
++	      func_append newdlfiles " $abs"
+ 	    done
+ 	    dlfiles="$newdlfiles"
+ 	    newdlprefiles=
+@@ -8116,15 +9346,33 @@
+ 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ 		*) abs=`pwd`"/$lib" ;;
+ 	      esac
+-	      newdlprefiles="$newdlprefiles $abs"
++	      func_append newdlprefiles " $abs"
+ 	    done
+ 	    dlprefiles="$newdlprefiles"
+ 	  fi
+ 	  $RM $output
+ 	  # place dlname in correct position for cygwin
++	  # In fact, it would be nice if we could use this code for all target
++	  # systems that can't hard-code library paths into their executables
++	  # and that have no shared library path variable independent of PATH,
++	  # but it turns out we can't easily determine that from inspecting
++	  # libtool variables, so we have to hard-code the OSs to which it
++	  # applies here; at the moment, that means platforms that use the PE
++	  # object format with DLL files.  See the long comment at the top of
++	  # tests/bindir.at for full details.
+ 	  tdlname=$dlname
+ 	  case $host,$output,$installed,$module,$dlname in
+-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
++	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
++	      # If a -bindir argument was supplied, place the dll there.
++	      if test "x$bindir" != x ;
++	      then
++		func_relative_path "$install_libdir" "$bindir"
++		tdlname=$func_relative_path_result$dlname
++	      else
++		# Otherwise fall back on heuristic.
++		tdlname=../bin/$dlname
++	      fi
++	      ;;
+ 	  esac
+ 	  $ECHO > $output "\
+ # $outputname - a libtool library file
+@@ -8183,7 +9431,7 @@
+     exit $EXIT_SUCCESS
+ }
+ 
+-{ test "$mode" = link || test "$mode" = relink; } &&
++{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+     func_mode_link ${1+"$@"}
+ 
+ 
+@@ -8203,9 +9451,9 @@
+     for arg
+     do
+       case $arg in
+-      -f) RM="$RM $arg"; rmforce=yes ;;
+-      -*) RM="$RM $arg" ;;
+-      *) files="$files $arg" ;;
++      -f) func_append RM " $arg"; rmforce=yes ;;
++      -*) func_append RM " $arg" ;;
++      *) func_append files " $arg" ;;
+       esac
+     done
+ 
+@@ -8214,24 +9462,23 @@
+ 
+     rmdirs=
+ 
+-    origobjdir="$objdir"
+     for file in $files; do
+       func_dirname "$file" "" "."
+       dir="$func_dirname_result"
+       if test "X$dir" = X.; then
+-	objdir="$origobjdir"
++	odir="$objdir"
+       else
+-	objdir="$dir/$origobjdir"
++	odir="$dir/$objdir"
+       fi
+       func_basename "$file"
+       name="$func_basename_result"
+-      test "$mode" = uninstall && objdir="$dir"
++      test "$opt_mode" = uninstall && odir="$dir"
+ 
+-      # Remember objdir for removal later, being careful to avoid duplicates
+-      if test "$mode" = clean; then
++      # Remember odir for removal later, being careful to avoid duplicates
++      if test "$opt_mode" = clean; then
+ 	case " $rmdirs " in
+-	  *" $objdir "*) ;;
+-	  *) rmdirs="$rmdirs $objdir" ;;
++	  *" $odir "*) ;;
++	  *) func_append rmdirs " $odir" ;;
+ 	esac
+       fi
+ 
+@@ -8257,18 +9504,17 @@
+ 
+ 	  # Delete the libtool libraries and symlinks.
+ 	  for n in $library_names; do
+-	    rmfiles="$rmfiles $objdir/$n"
++	    func_append rmfiles " $odir/$n"
+ 	  done
+-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
++	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+ 
+-	  case "$mode" in
++	  case "$opt_mode" in
+ 	  clean)
+-	    case "  $library_names " in
+-	    # "  " in the beginning catches empty $dlname
++	    case " $library_names " in
+ 	    *" $dlname "*) ;;
+-	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
++	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ 	    esac
+-	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ 	    ;;
+ 	  uninstall)
+ 	    if test -n "$library_names"; then
+@@ -8296,19 +9542,19 @@
+ 	  # Add PIC object to the list of files to remove.
+ 	  if test -n "$pic_object" &&
+ 	     test "$pic_object" != none; then
+-	    rmfiles="$rmfiles $dir/$pic_object"
++	    func_append rmfiles " $dir/$pic_object"
+ 	  fi
+ 
+ 	  # Add non-PIC object to the list of files to remove.
+ 	  if test -n "$non_pic_object" &&
+ 	     test "$non_pic_object" != none; then
+-	    rmfiles="$rmfiles $dir/$non_pic_object"
++	    func_append rmfiles " $dir/$non_pic_object"
+ 	  fi
+ 	fi
+ 	;;
+ 
+       *)
+-	if test "$mode" = clean ; then
++	if test "$opt_mode" = clean ; then
+ 	  noexename=$name
+ 	  case $file in
+ 	  *.exe)
+@@ -8318,7 +9564,7 @@
+ 	    noexename=$func_stripname_result
+ 	    # $file with .exe has already been added to rmfiles,
+ 	    # add $file without .exe
+-	    rmfiles="$rmfiles $file"
++	    func_append rmfiles " $file"
+ 	    ;;
+ 	  esac
+ 	  # Do a test to see if this is a libtool program.
+@@ -8327,7 +9573,7 @@
+ 	      func_ltwrapper_scriptname "$file"
+ 	      relink_command=
+ 	      func_source $func_ltwrapper_scriptname_result
+-	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
++	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+ 	    else
+ 	      relink_command=
+ 	      func_source $dir/$noexename
+@@ -8335,12 +9581,12 @@
+ 
+ 	    # note $name still contains .exe if it was in $file originally
+ 	    # as does the version of $file that was added into $rmfiles
+-	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
++	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ 	    if test "$fast_install" = yes && test -n "$relink_command"; then
+-	      rmfiles="$rmfiles $objdir/lt-$name"
++	      func_append rmfiles " $odir/lt-$name"
+ 	    fi
+ 	    if test "X$noexename" != "X$name" ; then
+-	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
++	      func_append rmfiles " $odir/lt-${noexename}.c"
+ 	    fi
+ 	  fi
+ 	fi
+@@ -8348,7 +9594,6 @@
+       esac
+       func_show_eval "$RM $rmfiles" 'exit_status=1'
+     done
+-    objdir="$origobjdir"
+ 
+     # Try to remove the ${objdir}s in the directories where we deleted files
+     for dir in $rmdirs; do
+@@ -8360,16 +9605,16 @@
+     exit $exit_status
+ }
+ 
+-{ test "$mode" = uninstall || test "$mode" = clean; } &&
++{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+     func_mode_uninstall ${1+"$@"}
+ 
+-test -z "$mode" && {
++test -z "$opt_mode" && {
+   help="$generic_help"
+   func_fatal_help "you must specify a MODE"
+ }
+ 
+ test -z "$exec_cmd" && \
+-  func_fatal_help "invalid operation mode \`$mode'"
++  func_fatal_help "invalid operation mode \`$opt_mode'"
+ 
+ if test -n "$exec_cmd"; then
+   eval exec "$exec_cmd"
diff --git a/recipes/libsdl/libsdl-ttf_2.0.10.bb b/recipes/libsdl/libsdl-ttf_2.0.10.bb
new file mode 100644
index 0000000000..a573328b6f
--- /dev/null
+++ b/recipes/libsdl/libsdl-ttf_2.0.10.bb
@@ -0,0 +1,19 @@
+DESCRIPTION = "Simple DirectMedia Layer truetype font library."
+SECTION = "libs"
+PRIORITY = "optional"
+DEPENDS = "virtual/libsdl freetype"
+LICENSE = "LGPL"
+
+SRC_URI = "http://www.libsdl.org/projects/SDL_ttf/release/SDL_ttf-${PV}.tar.gz \
+           ${@['','file://libtool-update.patch'][bb.data.getVar('LIBTOOL_HAS_SYSROOT', d, 1) == 'yes']} \
+          "
+
+S = "${WORKDIR}/SDL_ttf-${PV}"
+EXTRA_OECONF += "SDL_CONFIG=${STAGING_BINDIR_CROSS}/sdl-config "
+
+inherit autotools
+
+TARGET_CC_ARCH += "${LDFLAGS}"
+
+SRC_URI[md5sum] = "814e6e17e8879254208d23b3b7e0354b"
+SRC_URI[sha256sum] = "7d38704bcc7c34029c2dcb73b2d4857e8ad76341c6e0faed279eb9f743c66c6a"