diff options
| author |   Denys Dmytriyenko <denis@denix.org> | 2009-03-17 14:32:59 -0400 |
|---|---|---|
| committer | Denys Dmytriyenko <denis@denix.org> | 2009-03-17 14:32:59 -0400 |
| commit | 709c4d66e0b107ca606941b988bad717c0b45d9b (patch) | |
| tree | 37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/linux/linux-efika | |
| parent | fa6cd5a3b993f16c27de4ff82b42684516d433ba (diff) | |
| download | openembedded-709c4d66e0b107ca606941b988bad717c0b45d9b.tar.gz | |
rename packages/ to recipes/ per earlier agreement
See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Diffstat (limited to 'recipes/linux/linux-efika')
3 files changed, 2578 insertions, 0 deletions
diff --git a/recipes/linux/linux-efika/0001-powerpc-Add-device-tree-fixup-for-the-EFIKA.txt b/recipes/linux/linux-efika/0001-powerpc-Add-device-tree-fixup-for-the-EFIKA.txt new file mode 100644 index 0000000000..332ce4df19 --- /dev/null +++ b/recipes/linux/linux-efika/0001-powerpc-Add-device-tree-fixup-for-the-EFIKA.txt @@ -0,0 +1,99 @@ +From 6c8a0f1870285e82dc473d31ac297d570460dd66 Mon Sep 17 00:00:00 2001 +From: Sylvain Munaut <tnt@246tNt.com> +Date: Thu, 21 Dec 2006 22:26:39 +0100 +Subject: [PATCH] powerpc: Add device tree fixup for the EFIKA + +We make the efika device tree compliant with the defined bindings +(at least compliant enough). We also add some missing bits. + +Signed-off-by: Sylvain Munaut <tnt@246tNt.com> +--- + arch/powerpc/kernel/prom_init.c | 74 +++++++++++++++++++++++++++++++++++++++ + 1 files changed, 74 insertions(+), 0 deletions(-) + +diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c +index 520ef42..294e875 100644 +--- a/arch/powerpc/kernel/prom_init.c ++++ b/arch/powerpc/kernel/prom_init.c +@@ -2117,11 +2117,78 @@ #else + #define fixup_device_tree_pmac() + #endif + ++#ifdef CONFIG_PPC_EFIKA ++/* The current fw of the Efika has a device tree needs quite a few ++ * fixups to be compliant with the mpc52xx bindings. It's currently ++ * unknown if it will ever be compliant (come on bPlan ...) so we do fixups. ++ * NOTE that we (barely) tolerate it because the EFIKA was out before ++ * the bindings were finished, for any new boards -> RTFM ! */ ++ ++struct subst_entry { ++ char *path; ++ char *property; ++ void *value; ++ int value_len; ++}; ++ ++static void __init fixup_device_tree_efika(void) ++{ ++ /* Substitution table */ ++ #define prop_cstr(x) x, sizeof(x) ++ int prop_sound_irq[3] = { 2, 2, 0 }; ++ struct subst_entry efika_subst_table[] = { ++ { "/builtin/sound", "compatible", prop_cstr("mpc5200b-psc-ac97\0mpc52xx-psc-ac97") }, ++ { "/builtin/sound", "interrupts", prop_sound_irq, sizeof(prop_sound_irq) }, ++ {} ++ }; ++ #undef prop_cstr ++ ++ /* Vars */ ++ u32 node; ++ char prop[64]; ++ int rv, i; ++ ++ /* Check if we're really running on a EFIKA */ ++ node = call_prom("finddevice", 1, 1, ADDR("/")); ++ if (!PHANDLE_VALID(node)) ++ return; ++ ++ rv = prom_getprop(node, "model", prop, sizeof(prop)); ++ if (rv == PROM_ERROR) ++ return; ++ if (strcmp(prop, "EFIKA5K2")) ++ return; ++ ++ prom_printf("Applying EFIKA device tree fixups\n"); ++ ++ /* Process substitution table */ ++ for (i=0; efika_subst_table[i].path; i++) { ++ struct subst_entry *se = &efika_subst_table[i]; ++ ++ node = call_prom("finddevice", 1, 1, ADDR(se->path)); ++ if (!PHANDLE_VALID(node)) { ++ prom_printf("fixup_device_tree_efika: ", ++ "skipped entry %x - not found\n", i); ++ continue; ++ } ++ ++ rv = prom_setprop(node, se->path, se->property, ++ se->value, se->value_len ); ++ if (rv == PROM_ERROR) ++ prom_printf("fixup_device_tree_efika: ", ++ "skipped entry %x - setprop error\n", i); ++ } ++} ++#else ++#define fixup_device_tree_efika() ++#endif ++ + static void __init fixup_device_tree(void) + { + fixup_device_tree_maple(); + fixup_device_tree_chrp(); + fixup_device_tree_pmac(); ++ fixup_device_tree_efika(); + } + + static void __init prom_find_boot_cpu(void) +-- +1.4.2 + diff --git a/recipes/linux/linux-efika/0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt b/recipes/linux/linux-efika/0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt new file mode 100644 index 0000000000..a352f0e2f5 --- /dev/null +++ b/recipes/linux/linux-efika/0001-sound-Add-support-for-the-MPC52xx-PSC-AC97-Link.txt @@ -0,0 +1,834 @@ +I cleaned up the setting of the port_config register on the MPC5200B. +This driver now touches only the two relevant bits without overriding +the others. + +Signed-off-by: Leon Woestenberg <leonw@mailcan.com> + +From 144658ad3d23bb426e29562235e40f0f9797a9c7 Mon Sep 17 00:00:00 2001 +From: Sylvain Munaut <tnt@246tNt.com> +Date: Mon, 18 Dec 2006 22:51:38 +0100 +Subject: [PATCH] sound: Add support for the MPC52xx PSC AC97 Link + +Messy driver, to be cleaned ... a lot ... + +Signed-off-by: Sylvain Munaut <tnt@246tNt.com> +--- + include/asm-ppc/mpc52xx_psc.h | 10 - + sound/ppc/Kconfig | 16 + + sound/ppc/Makefile | 3 + sound/ppc/mpc52xx_ac97.c | 738 +++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 765 insertions(+), 2 deletions(-) + +Index: linux-2.6.19-rc6_efika/include/asm-ppc/mpc52xx_psc.h +=================================================================== +--- linux-2.6.19-rc6_efika.orig/include/asm-ppc/mpc52xx_psc.h 2007-01-14 19:45:07.000000000 +0100 ++++ linux-2.6.19-rc6_efika/include/asm-ppc/mpc52xx_psc.h 2007-01-14 19:45:07.000000000 +0100 +@@ -28,6 +28,10 @@ + #define MPC52xx_PSC_MAXNUM 6 + + /* Programmable Serial Controller (PSC) status register bits */ ++#define MPC52xx_PSC_SR_UNEX_RX 0x0001 ++#define MPC52xx_PSC_SR_DATA_VAL 0x0002 ++#define MPC52xx_PSC_SR_DATA_OVR 0x0004 ++#define MPC52xx_PSC_SR_CMDSEND 0x0008 + #define MPC52xx_PSC_SR_CDE 0x0080 + #define MPC52xx_PSC_SR_RXRDY 0x0100 + #define MPC52xx_PSC_SR_RXFULL 0x0200 +@@ -132,8 +136,10 @@ + u8 reserved5[3]; + u8 ctlr; /* PSC + 0x1c */ + u8 reserved6[3]; +- u16 ccr; /* PSC + 0x20 */ +- u8 reserved7[14]; ++ u32 ccr; /* PSC + 0x20 */ ++ u32 ac97_slots; /* PSC + 0x24 */ ++ u32 ac97_cmd; /* PSC + 0x28 */ ++ u32 ac97_data; /* PSC + 0x2c */ + u8 ivr; /* PSC + 0x30 */ + u8 reserved8[3]; + u8 ip; /* PSC + 0x34 */ +Index: linux-2.6.19-rc6_efika/sound/ppc/Kconfig +=================================================================== +--- linux-2.6.19-rc6_efika.orig/sound/ppc/Kconfig 2007-01-14 19:45:07.000000000 +0100 ++++ linux-2.6.19-rc6_efika/sound/ppc/Kconfig 2007-01-14 19:45:07.000000000 +0100 +@@ -33,3 +33,19 @@ + option. + + endmenu ++ ++ ++# ALSA ppc drivers ++ ++menu "ALSA PPC devices" ++ depends on SND!=n && PPC ++ ++config SND_PPC_MPC52xx_AC97 ++ tristate "Freescale MPC52xx AC97 interface support" ++ depends on SND && PPC_MPC52xx ++ select SND_AC97_CODEC ++ help ++ Say Y or M if you want to support any AC97 codec attached to ++ the Freescqle MPC52xx AC97 interface. ++ ++endmenu +Index: linux-2.6.19-rc6_efika/sound/ppc/Makefile +=================================================================== +--- linux-2.6.19-rc6_efika.orig/sound/ppc/Makefile 2007-01-14 19:45:07.000000000 +0100 ++++ linux-2.6.19-rc6_efika/sound/ppc/Makefile 2007-01-14 19:45:07.000000000 +0100 +@@ -4,6 +4,9 @@ + # + + snd-powermac-objs := powermac.o pmac.o awacs.o burgundy.o daca.o tumbler.o keywest.o beep.o ++snd-mpc52xx-ac97-objs := mpc52xx_ac97.o + + # Toplevel Module Dependency + obj-$(CONFIG_SND_POWERMAC) += snd-powermac.o ++ ++obj-$(CONFIG_SND_PPC_MPC52xx_AC97) += snd-mpc52xx-ac97.o +Index: linux-2.6.19-rc6_efika/sound/ppc/mpc52xx_ac97.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.19-rc6_efika/sound/ppc/mpc52xx_ac97.c 2007-01-14 22:45:55.000000000 +0100 +@@ -0,0 +1,742 @@ ++/* ++ * Driver for the PSC of the Freescale MPC52xx configured as AC97 interface ++ * ++ * ++ * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com> ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#define DEBUG ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/interrupt.h> ++ ++#include <sound/driver.h> ++#include <sound/core.h> ++#include <sound/initval.h> ++#include <sound/pcm.h> ++#include <sound/pcm_params.h> ++#include <sound/ac97_codec.h> ++ ++#include <asm/of_platform.h> ++#include <asm/mpc52xx_psc.h> ++ ++ ++#define DRV_NAME "mpc52xx-psc-ac97" ++ ++ ++/* ======================================================================== */ ++/* Structs / Defines */ ++/* ======================================================================== */ ++ ++/* Private structure */ ++struct mpc52xx_ac97_priv { ++ struct device *dev; ++ resource_size_t mem_start; ++ resource_size_t mem_len; ++ int irq; ++ struct mpc52xx_psc __iomem *psc; ++ struct snd_card *card; ++ struct snd_pcm *pcm; ++ struct snd_ac97 *ac97; ++ ++ struct snd_pcm_substream *substream_playback; ++ unsigned int buf_pos; ++}; ++ ++/* Register bit definition (AC97 mode specific) */ ++#define PSC_AC97_SLOT_BIT(n) (1<<(12-n)) ++#define PSC_AC97_SLOTS_XMIT_SHIFT 16 ++#define PSC_AC97_SLOTS_RECV_SHIFT 0 ++ ++ ++ ++/* ======================================================================== */ ++/* ISR routine */ ++/* ======================================================================== */ ++ ++static irqreturn_t ++mpc52xx_ac97_irq(int irq, void *dev_id) ++{ ++ struct mpc52xx_ac97_priv *priv = dev_id; ++ ++ static int icnt = 0; ++ #if 0 ++ { ++ unsigned int val; ++// val = in_be32(&priv->psc->ac97_data); ++ printk(KERN_INFO "mpc52xx_ac97_irq fired (isr=%04x, status=%04x) %08x\n", in_be16(&priv->psc->mpc52xx_psc_imr), in_be16(&priv->psc->mpc52xx_psc_status), val); ++ out_8(&priv->psc->command,MPC52xx_PSC_RST_ERR_STAT); ++ } ++ #endif ++ ++ /* Anti Crash during dev ;) */ ++ #if 0 ++ if ((icnt++) > 50000) ++ out_be16(&priv->psc->mpc52xx_psc_imr, 0); ++ #endif ++ ++ /* Copy 64 data into the buffer */ ++ if (in_be16(&priv->psc->mpc52xx_psc_imr) & 0x0100) { ++ if (priv->substream_playback) { ++ struct snd_pcm_runtime *rt; ++ ++ rt = priv->substream_playback->runtime; ++ ++ if (snd_pcm_playback_hw_avail(rt) < bytes_to_frames(rt,128)) { ++ int i; ++ /* Push silence */ ++ for (i=0; i<64; i++) ++ out_be32(&priv->psc->mpc52xx_psc_buffer_32, 0x00000800); ++ printk(KERN_DEBUG "pushed silence ...\n"); ++ } else { ++ int i; ++ unsigned short *data; ++ ++ data = (unsigned short *) ++ (&rt->dma_area[frames_to_bytes(rt, priv->buf_pos)]); ++ ++ for (i=0; i<64; i++) ++ out_be32(&priv->psc->mpc52xx_psc_buffer_32, ++ (((unsigned int)data[i]) << 16) | 0x00000000); ++ /* Setting the sof bit looks useless */ ++ ++ priv->buf_pos += bytes_to_frames(rt,128);; ++ if (priv->buf_pos >= rt->buffer_size) ++ priv->buf_pos = 0; ++ ++ snd_pcm_period_elapsed(priv->substream_playback); ++ } ++ } else { ++ out_be16(&priv->psc->mpc52xx_psc_imr, 0); ++ printk(KERN_DEBUG "Interrupt with no stream ...\n"); ++ } ++ } else { ++ printk(KERN_ERR "Spurious int\n"); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++ ++/* ======================================================================== */ ++/* PCM interface */ ++/* ======================================================================== */ ++ ++/* HW desc */ ++ ++static struct snd_pcm_hardware mpc52xx_ac97_hw = { ++ .info = SNDRV_PCM_INFO_INTERLEAVED | ++ SNDRV_PCM_INFO_MMAP | ++ SNDRV_PCM_INFO_MMAP_VALID, ++ .formats = SNDRV_PCM_FMTBIT_S16_BE, ++ .rates = SNDRV_PCM_RATE_8000_48000, ++ .rate_min = 8000, ++ .rate_max = 48000, ++ .channels_min = 1, ++ .channels_max = 2, /* Support for more ? */ ++ .buffer_bytes_max = 128*1024, ++ .period_bytes_min = 128, /* 32, */ ++ .period_bytes_max = 128, /* 16*1024, */ ++ .periods_min = 8, ++ .periods_max = 256, ++ .fifo_size = 512, ++}; ++ ++ ++/* Playback */ ++ ++static int ++mpc52xx_ac97_playback_open(struct snd_pcm_substream *substream) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ ++ dev_dbg(priv->dev, "mpc52xx_ac97_playback_open(%p)\n", substream); ++ ++ substream->runtime->hw = mpc52xx_ac97_hw; ++ ++ priv->substream_playback = substream; ++ priv->buf_pos = 0; /* FIXME Do that where ? */ ++ ++ return 0; /* FIXME */ ++} ++ ++static int ++mpc52xx_ac97_playback_close(struct snd_pcm_substream *substream) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ dev_dbg(priv->dev, "mpc52xx_ac97_playback_close(%p)\n", substream); ++ priv->substream_playback = NULL; ++ return 0; /* FIXME */ ++} ++ ++static int ++mpc52xx_ac97_playback_prepare(struct snd_pcm_substream *substream) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ ++ dev_dbg(priv->dev, "mpc52xx_ac97_playback_prepare(%p)\n", substream); ++ ++ /* FIXME, need a spinlock to protect access */ ++ if (substream->runtime->channels == 1) ++ out_be32(&priv->psc->ac97_slots, 0x01000000); ++ else ++ out_be32(&priv->psc->ac97_slots, 0x03000000); ++ ++ snd_ac97_set_rate(priv->ac97, AC97_PCM_FRONT_DAC_RATE, substream->runtime->rate); ++ ++ return 0; /* FIXME */ ++} ++ ++ ++/* Capture */ ++ ++static int ++mpc52xx_ac97_capture_open(struct snd_pcm_substream *substream) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ return 0; /* FIXME */ ++} ++ ++static int ++mpc52xx_ac97_capture_close(struct snd_pcm_substream *substream) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ return 0; /* FIXME */ ++} ++ ++static int ++mpc52xx_ac97_capture_prepare(struct snd_pcm_substream *substream) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ return 0; /* FIXME */ ++} ++ ++ ++/* Common */ ++ ++static int ++mpc52xx_ac97_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ int rv; ++ ++ dev_dbg(priv->dev, "mpc52xx_ac97_hw_params(%p)\n", substream); ++ ++ rv = snd_pcm_lib_malloc_pages(substream, ++ params_buffer_bytes(params)); ++ if (rv < 0) { ++ printk(KERN_ERR "hw params failes\n"); /* FIXME */ ++ return rv; ++ } ++ ++ printk(KERN_DEBUG "%d %d %d\n", params_buffer_bytes(params), params_period_bytes(params), params_periods(params)); ++ ++ ++ return 0; ++} ++ ++static int ++mpc52xx_ac97_hw_free(struct snd_pcm_substream *substream) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ ++ dev_dbg(priv->dev, "mpc52xx_ac97_hw_free(%p)\n", substream); ++ ++ return snd_pcm_lib_free_pages(substream); ++} ++ ++static int ++mpc52xx_ac97_trigger(struct snd_pcm_substream *substream, int cmd) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ int rv = 0; ++ ++ dev_dbg(priv->dev, "mpc52xx_ac97_trigger(%p,%d)\n", substream, cmd); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ /* Enable TX interrupt */ ++ out_be16(&priv->psc->mpc52xx_psc_imr, 0x0100); // 0x0100 ++ ++ break; ++ ++ case SNDRV_PCM_TRIGGER_STOP: ++ /* Disable TX interrupt */ ++ out_be16(&priv->psc->mpc52xx_psc_imr, 0x0000); ++ ++ break; ++ ++ default: ++ rv = -EINVAL; ++ } ++ ++ /* FIXME */ ++ return rv; ++} ++ ++static snd_pcm_uframes_t ++mpc52xx_ac97_pointer(struct snd_pcm_substream *substream) ++{ ++ struct mpc52xx_ac97_priv *priv = substream->pcm->private_data; ++ ++// dev_dbg(priv->dev, "mpc52xx_ac97_pointer(%p)\n", substream); ++ ++ if (substream->runtime->channels == 1) ++ return priv->buf_pos; /* FIXME */ ++ else ++ return priv->buf_pos >> 1; /* FIXME */ ++} ++ ++ ++/* Ops */ ++ ++static struct snd_pcm_ops mpc52xx_ac97_playback_ops = { ++ .open = mpc52xx_ac97_playback_open, ++ .close = mpc52xx_ac97_playback_close, ++ .ioctl = snd_pcm_lib_ioctl, ++ .hw_params = mpc52xx_ac97_hw_params, ++ .hw_free = mpc52xx_ac97_hw_free, ++ .prepare = mpc52xx_ac97_playback_prepare, ++ .trigger = mpc52xx_ac97_trigger, ++ .pointer = mpc52xx_ac97_pointer, ++}; ++ ++static struct snd_pcm_ops mpc52xx_ac97_capture_ops = { ++ .open = mpc52xx_ac97_capture_open, ++ .close = mpc52xx_ac97_capture_close, ++ .ioctl = snd_pcm_lib_ioctl, ++ .hw_params = mpc52xx_ac97_hw_params, ++ .hw_free = mpc52xx_ac97_hw_free, ++ .prepare = mpc52xx_ac97_capture_prepare, ++ .trigger = mpc52xx_ac97_trigger, ++ .pointer = mpc52xx_ac97_pointer, ++}; ++ ++ ++/* ======================================================================== */ ++/* AC97 Bus interface */ ++/* ======================================================================== */ ++ ++static unsigned short ++mpc52xx_ac97_bus_read(struct snd_ac97 *ac97, unsigned short reg) ++{ ++ struct mpc52xx_ac97_priv *priv = ac97->private_data; ++ int timeout; ++ unsigned int val; ++ ++ dev_dbg(priv->dev, "ac97 read: reg %04x\n", reg); ++ ++ /* Wait for it to be ready */ ++ timeout = 1000; ++ while ((--timeout) && (in_be16(&priv->psc->mpc52xx_psc_status) & ++ MPC52xx_PSC_SR_CMDSEND) ) ++ udelay(10); ++ ++ if (!timeout) { ++ printk(KERN_ERR DRV_NAME ": timeout on ac97 bus (rdy)\n"); ++ return 0xffff; ++ } ++ ++ /* Do the read */ ++ out_be32(&priv->psc->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24)); ++ ++ /* Wait for the answer */ ++ timeout = 1000; ++ while ((--timeout) && !(in_be16(&priv->psc->mpc52xx_psc_status) & ++ MPC52xx_PSC_SR_DATA_VAL) ) ++ udelay(10); ++ ++ if (!timeout) { ++ printk(KERN_ERR DRV_NAME ": timeout on ac97 read (val)\n"); ++ return 0xffff; ++ } ++ ++ /* Get the data */ ++ val = in_be32(&priv->psc->ac97_data); ++ if ( ((val>>24) & 0x7f) != reg ) { ++ printk(KERN_ERR DRV_NAME ": reg echo error on ac97 read\n"); ++ return 0xffff; ++ } ++ val = (val >> 8) & 0xffff; ++ ++ dev_dbg(priv->dev, "ac97 read ok: reg %04x val %04x\n", ++ reg, val); ++ ++ return (unsigned short) val; ++} ++ ++static void ++mpc52xx_ac97_bus_write(struct snd_ac97 *ac97, ++ unsigned short reg, unsigned short val) ++{ ++ struct mpc52xx_ac97_priv *priv = ac97->private_data; ++ int timeout; ++ ++ dev_dbg(priv->dev, "ac97 write: reg %04x val %04x\n", ++ reg, val); ++ ++ /* Wait for it to be ready */ ++ timeout = 1000; ++ while ((--timeout) && (in_be16(&priv->psc->mpc52xx_psc_status) & ++ MPC52xx_PSC_SR_CMDSEND) ) ++ udelay(10); ++ ++ if (!timeout) { ++ printk(KERN_ERR DRV_NAME ": timeout on ac97 write\n"); ++ return; ++ } ++ ++ /* Write data */ ++ out_be32(&priv->psc->ac97_cmd, ((reg & 0x7f) << 24) | (val << 8)); ++} ++ ++static void ++mpc52xx_ac97_bus_reset(struct snd_ac97 *ac97) ++{ ++ struct mpc52xx_ac97_priv *priv = ac97->private_data; ++ ++ dev_dbg(priv->dev, "ac97 codec reset\n"); ++ ++ /* Do a cold reset */ ++ out_8(&priv->psc->op1, 0x03); ++ udelay(10); ++ out_8(&priv->psc->op0, 0x02); ++ udelay(50); ++ ++ /* PSC recover from cold reset (cfr user manual, not sure if useful) */ ++ out_be32(&priv->psc->sicr, in_be32(&priv->psc->sicr)); ++} ++ ++ ++static struct snd_ac97_bus_ops mpc52xx_ac97_bus_ops = { ++ .read = mpc52xx_ac97_bus_read, ++ .write = mpc52xx_ac97_bus_write, ++ .reset = mpc52xx_ac97_bus_reset, ++}; ++ ++ ++/* ======================================================================== */ ++/* Sound driver setup */ ++/* ======================================================================== */ ++ ++static int ++mpc52xx_ac97_setup_pcm(struct mpc52xx_ac97_priv *priv) ++{ ++ int rv; ++ ++ rv = snd_pcm_new(priv->card, DRV_NAME "-pcm", 0, 1, 1, &priv->pcm); ++ if (rv) { ++ printk(KERN_ERR DRV_NAME ": snd_pcm_new failed\n"); ++ return rv; ++ } ++ ++ rv = snd_pcm_lib_preallocate_pages_for_all(priv->pcm, ++ SNDRV_DMA_TYPE_CONTINUOUS, snd_dma_continuous_data(GFP_KERNEL), ++ 128*1024, 128*1024); ++ if (rv) { ++ printk(KERN_ERR DRV_NAME ++ ": snd_pcm_lib_preallocate_pages_for_all failed\n"); ++ return rv; ++ } ++ ++ snd_pcm_set_ops(priv->pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ &mpc52xx_ac97_playback_ops); ++ snd_pcm_set_ops(priv->pcm, SNDRV_PCM_STREAM_CAPTURE, ++ &mpc52xx_ac97_capture_ops); ++ ++ priv->pcm->private_data = priv; ++ priv->pcm->info_flags = 0; ++ ++ strcpy(priv->pcm->name, "Freescale MPC52xx PSC-AC97 PCM"); ++ ++ return 0; ++} ++ ++static int ++mpc52xx_ac97_setup_mixer(struct mpc52xx_ac97_priv *priv) ++{ ++ struct snd_ac97_bus *ac97_bus; ++ struct snd_ac97_template ac97_template; ++ int rv; ++ ++ rv = snd_ac97_bus(priv->card, 0, &mpc52xx_ac97_bus_ops, NULL, &ac97_bus); ++ if (rv) { ++ printk(KERN_ERR DRV_NAME ": snd_ac97_bus failed\n"); ++ return rv; ++ } ++ ++ memset(&ac97_template, 0, sizeof(struct snd_ac97_template)); ++ ac97_template.private_data = priv; ++ ++ rv = snd_ac97_mixer(ac97_bus, &ac97_template, &priv->ac97); ++ if (rv) { ++ printk(KERN_ERR DRV_NAME ": snd_ac97_mixer failed\n"); ++ return rv; ++ } ++ ++ return 0; ++} ++ ++ ++static int ++mpc52xx_ac97_hwinit(struct mpc52xx_ac97_priv *priv) ++{ ++ /* Reset everything first by safety */ ++ out_8(&priv->psc->command,MPC52xx_PSC_RST_RX); ++ out_8(&priv->psc->command,MPC52xx_PSC_RST_TX); ++ out_8(&priv->psc->command,MPC52xx_PSC_RST_ERR_STAT); ++ ++ /* Do a cold reset of codec */ ++ out_8(&priv->psc->op1, 0x03); ++ udelay(10); ++ out_8(&priv->psc->op0, 0x02); ++ udelay(50); ++ ++ /* Configure AC97 enhanced mode */ ++ out_be32(&priv->psc->sicr, 0x03010000); ++ ++ /* No slots active */ ++ out_be32(&priv->psc->ac97_slots, 0x00000000); ++ ++ /* No IRQ */ ++ out_be16(&priv->psc->mpc52xx_psc_imr, 0x0000); ++ ++ /* FIFO levels */ ++ out_8(&priv->psc->rfcntl, 0x07); ++ out_8(&priv->psc->tfcntl, 0x07); ++ out_be16(&priv->psc->rfalarm, 0x80); ++ out_be16(&priv->psc->tfalarm, 0x80); ++ ++ /* Go */ ++ out_8(&priv->psc->command,MPC52xx_PSC_TX_ENABLE); ++ out_8(&priv->psc->command,MPC52xx_PSC_RX_ENABLE); ++ ++ return 0; ++} ++ ++static int ++mpc52xx_ac97_hwshutdown(struct mpc52xx_ac97_priv *priv) ++{ ++ /* No IRQ */ ++ out_be16(&priv->psc->mpc52xx_psc_imr, 0x0000); ++ ++ /* Disable TB & RX */ ++ out_8(&priv->psc->command,MPC52xx_PSC_RST_RX); ++ out_8(&priv->psc->command,MPC52xx_PSC_RST_TX); ++ ++ /* FIXME : Reset or put codec in low power ? */ ++ ++ return 0; ++} ++ ++ ++/* ======================================================================== */ ++/* OF Platform Driver */ ++/* ======================================================================== */ ++ ++static int __devinit ++mpc52xx_ac97_probe(struct of_device *op, const struct of_device_id *match) ++{ ++ struct device_node *dn = op->node; ++ struct mpc52xx_ac97_priv *priv; ++ struct snd_card *card; ++ struct resource res; ++ int rv; ++ ++ dev_dbg(&op->dev, "probing MPC52xx PSC AC97 driver\n"); ++ ++ /* Get card structure */ ++ rv = -ENOMEM; ++ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, ++ THIS_MODULE, sizeof(struct mpc52xx_ac97_priv)); ++ if (!card) ++ goto err_early; ++ ++ priv = card->private_data; ++ ++ /* Init our private structure */ ++ priv->card = card; ++ priv->dev = &op->dev; ++ ++ /* Get resources (mem,irq,...) */ ++ rv = of_address_to_resource(dn, 0, &res); ++ if (rv) ++ goto err_early; ++ ++ priv->mem_start = res.start; ++ priv->mem_len = res.end - res.start + 1; ++ ++ if (!request_mem_region(priv->mem_start, priv->mem_len, DRV_NAME)) { ++ printk(KERN_ERR DRV_NAME ": request_mem_region failed\n"); ++ rv = -EBUSY; ++ goto err_early; ++ } ++ ++ priv->psc = ioremap(priv->mem_start, priv->mem_len); ++ if (!priv->psc) { ++ printk(KERN_ERR DRV_NAME ": ioremap failed\n"); ++ rv = -ENOMEM; ++ goto err_iomap; ++ } ++ ++ priv->irq = irq_of_parse_and_map(dn, 0); ++ if (priv->irq == NO_IRQ) { ++ printk(KERN_ERR DRV_NAME ": irq_of_parse_and_map failed\n"); ++ rv = -EBUSY; ++ goto err_irqmap; ++ } ++ ++ /* Low level HW Init */ ++ mpc52xx_ac97_hwinit(priv); ++ ++ /* Request IRQ now that we're 'stable' */ ++ rv = request_irq(priv->irq, mpc52xx_ac97_irq, 0, DRV_NAME, priv); ++ if (rv < 0) { ++ printk(KERN_ERR DRV_NAME ": request_irq failed\n"); ++ goto err_irqreq; ++ } ++ ++ /* Prepare sound stuff */ ++ rv = mpc52xx_ac97_setup_mixer(priv); ++ if (rv) ++ goto err_late; ++ ++ rv = mpc52xx_ac97_setup_pcm(priv); ++ if (rv) ++ goto err_late; ++ ++ /* Finally register the card */ ++ snprintf(card->shortname, sizeof(card->shortname), DRV_NAME); ++ snprintf(card->longname, sizeof(card->longname), ++ "Freescale MPC52xx PSC-AC97 (%s)", card->mixername); ++ ++ rv = snd_card_register(card); ++ if (rv) { ++ printk(KERN_ERR DRV_NAME ": snd_card_register failed\n"); ++ goto err_late; ++ } ++ ++ dev_set_drvdata(&op->dev, priv); ++ ++ return 0; ++ ++err_late: ++ free_irq(priv->irq, priv); ++err_irqreq: ++ mpc52xx_ac97_hwshutdown(priv); ++ irq_dispose_mapping(priv->irq); ++err_irqmap: ++ iounmap(priv->psc); ++err_iomap: ++ release_mem_region(priv->mem_start, priv->mem_len); ++err_early: ++ if (card) ++ snd_card_free(card); ++ return rv; ++} ++ ++static int ++mpc52xx_ac97_remove(struct of_device *op) ++{ ++ struct mpc52xx_ac97_priv *priv; ++ ++ dev_dbg(&op->dev, "removing MPC52xx PSC AC97 driver\n"); ++ ++ priv = dev_get_drvdata(&op->dev); ++ if (priv) { ++ /* Sound subsys shutdown */ ++ snd_card_free(priv->card); ++ ++ /* Low level HW shutdown */ ++ mpc52xx_ac97_hwshutdown(priv); ++ ++ /* Release resources */ ++ iounmap(priv->psc); ++ free_irq(priv->irq, priv); ++ irq_dispose_mapping(priv->irq); ++ release_mem_region(priv->mem_start, priv->mem_len); ++ } ++ ++ dev_set_drvdata(&op->dev, NULL); ++ ++ return 0; ++} ++ ++ ++static struct of_device_id mpc52xx_ac97_of_match[] = { ++ { ++/* .type = "ac97", FIXME Efika ... */ ++ .compatible = "mpc5200b-psc-ac97", /* B only for now */ ++ }, ++}; ++/* Prevent autoload during developpment phase ... */ ++/* MODULE_DEVICE_TABLE(of, mpc52xx_ac97_of_match); */ ++ ++ ++static struct of_platform_driver mpc52xx_ac97_of_driver = { ++ .owner = THIS_MODULE, ++ .name = DRV_NAME, ++ .match_table = mpc52xx_ac97_of_match, ++ .probe = mpc52xx_ac97_probe, ++ .remove = mpc52xx_ac97_remove, ++ .driver = { ++ .name = DRV_NAME, ++ }, ++}; ++ ++ ++/* ======================================================================== */ ++/* Module */ ++/* ======================================================================== */ ++ ++static int __init ++mpc52xx_ac97_init(void) ++{ ++ int rv; ++ ++ /* Set port_config bits[25:26] to 01, keep the others as-is. This ++ sets PSC2 to AC97 mode. */ ++ { ++ void *mbar; ++ u32 port_config; ++ mbar = ioremap(0xf0000000, 0x100000); ++ port_config = in_be32(mbar + 0xb00); ++ printk(KERN_INFO "port_config was: %08x\n", port_config); ++ port_config &= ~0x00000060; ++ port_config |= 0x00000020; ++ out_be32(mbar + 0xb00, port_config); ++ printk(KERN_INFO "port_config now: %08x\n", port_config); ++ iounmap(mbar); ++ } ++ ++ printk(KERN_INFO "Sound: MPC52xx PSC AC97 driver\n"); ++ ++ rv = of_register_platform_driver(&mpc52xx_ac97_of_driver); ++ if (rv) { ++ printk(KERN_ERR DRV_NAME ": " ++ "of_register_platform_driver failed (%i)\n", rv); ++ return rv; ++ } ++ ++ return 0; ++} ++ ++static void __exit ++mpc52xx_ac97_exit(void) ++{ ++ of_unregister_platform_driver(&mpc52xx_ac97_of_driver); ++} ++ ++module_init(mpc52xx_ac97_init); ++module_exit(mpc52xx_ac97_exit); ++ ++MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>"); ++MODULE_DESCRIPTION(DRV_NAME ": Freescale MPC52xx PSC AC97 driver"); ++MODULE_LICENSE("GPL"); ++ diff --git a/recipes/linux/linux-efika/defconfig b/recipes/linux/linux-efika/defconfig new file mode 100644 index 0000000000..de271da67a --- /dev/null +++ b/recipes/linux/linux-efika/defconfig @@ -0,0 +1,1645 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Sat May 19 17:43:26 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +CONFIG_CLASSIC32=y +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="-efika" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +CONFIG_PPC_CHRP=y +CONFIG_PPC_MPC52xx=y +CONFIG_PPC_MPC5200=y +CONFIG_PPC_MPC5200_BUGFIX=y +CONFIG_PPC_BESTCOMM=y +CONFIG_PPC_EFIKA=y +CONFIG_PPC_LITE5200=y +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +CONFIG_PPC_NATIVE=y +CONFIG_UDBG_RTAS_CONSOLE=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y +# CONFIG_MMIO_NVRAM is not set +CONFIG_PPC_MPC106=y +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,9600 console=ttyPSC0,115200" +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_ISA is not set +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +CONFIG_DONGLE=y +CONFIG_ESI_DONGLE=m +CONFIG_ACTISYS_DONGLE=m +CONFIG_TEKRAM_DONGLE=m +CONFIG_TOIM3232_DONGLE=m +CONFIG_LITELINK_DONGLE=m +CONFIG_MA600_DONGLE=m +CONFIG_GIRBIL_DONGLE=m +CONFIG_MCP2120_DONGLE=m +CONFIG_OLD_BELKIN_DONGLE=m +CONFIG_ACT200L_DONGLE=m + +# +# Old SIR device drivers +# +CONFIG_IRPORT_SIR=m + +# +# Old Serial dongle support +# +# CONFIG_DONGLE_OLD is not set + +# +# FIR device drivers +# +CONFIG_USB_IRDA=m +CONFIG_SIGMATEL_FIR=m +CONFIG_NSC_FIR=m +CONFIG_WINBOND_FIR=m +CONFIG_TOSHIBA_FIR=m +CONFIG_SMC_IRCC_FIR=m +CONFIG_ALI_FIR=m +CONFIG_VLSI_FIR=m +CONFIG_VIA_FIR=m +CONFIG_MCS_FIR=m +# CONFIG_BT is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDEDMA_IVB=y +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=y +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +CONFIG_ATA_GENERIC=y +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +CONFIG_PATA_MPC52xx=y +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +CONFIG_FIXED_PHY=m +CONFIG_FIXED_MII_10_FDX=y +CONFIG_FIXED_MII_100_FDX=y + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=m +CONFIG_TYPHOON=m + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# MPC5200 Networking Options +# +CONFIG_FEC_MPC52xx=y +CONFIG_USE_MDIO=y + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=m +# CONFIG_R8169_NAPI is not set +CONFIG_SIS190=m +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +CONFIG_SK98LIN=m +CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +CONFIG_ATMEL=m +# CONFIG_PCI_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +CONFIG_USB_ZD1201=m +CONFIG_HOSTAP=m +# CONFIG_HOSTAP_FIRMWARE is not set +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +# CONFIG_SLIP_SMART is not set +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_RAW=m +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=16 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MPC52xx=y +CONFIG_SERIAL_MPC52xx_CONSOLE=y +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_BRIQ_PANEL is not set +CONFIG_HVC_DRIVER=y +CONFIG_HVC_RTAS=y + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_WATCHDOG_RTAS=m + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m +CONFIG_WDT_501_PCI=y + +# +# USB-based Watchdog Cards +# +CONFIG_USBPCWATCHDOG=m +CONFIG_HW_RANDOM=y +CONFIG_NVRAM=y +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +CONFIG_AGP=m +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_HYDRA is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +CONFIG_I2C_OCORES=y +CONFIG_I2C_PARPORT_LIGHT=y +# CONFIG_I2C_PASEMI is not set +CONFIG_I2C_PROSAVAGE=m +CONFIG_I2C_SAVAGE4=m +CONFIG_I2C_SIS5595=m +CONFIG_I2C_SIS630=m +CONFIG_I2C_SIS96X=m +# CONFIG_I2C_STUB is not set +CONFIG_I2C_VIA=m +CONFIG_I2C_VIAPRO=m +CONFIG_I2C_VOODOO3=m +CONFIG_I2C_PCA_ISA=m + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=m +CONFIG_SENSORS_DS1374=m +CONFIG_SENSORS_EEPROM=m +CONFIG_SENSORS_PCF8574=m +CONFIG_SENSORS_PCA9539=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_M41T00=m +CONFIG_SENSORS_MAX6875=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +CONFIG_FB_DDC=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set +CONFIG_FB_MACMODES=y +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +CONFIG_FB_ATY128=y +CONFIG_FB_ATY=y +CONFIG_FB_ATY_CT=y +CONFIG_FB_ATY_GENERIC_LCD=y +CONFIG_FB_ATY_GX=y +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +CONFIG_FB_SIS=y +CONFIG_FB_SIS_300=y +CONFIG_FB_SIS_315=y +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_SOC=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +# CONFIG_LEDS_CLASS is not set + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=m +CONFIG_RTC_INTF_PROC=m +CONFIG_RTC_INTF_DEV=m +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +# CONFIG_INTEL_IOATDMA is not set + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +CONFIG_JFS_FS=y +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=y +CONFIG_HFSPLUS_FS=y +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_BOOTX_TEXT=y +CONFIG_SERIAL_TEXT_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# |