u-boot-mkimage-openmoko-native: Unused now, remove.

Signed-off-by: Tom Rini <tom_rini@mentor.com>

60 files changed, 0 insertions, 26575 deletions

diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-create-optional.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-create-optional.patch
deleted file mode 100644
index d7a2a872e5..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-create-optional.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-This patch makes creation of the BBT optional for the s3c24x0 platform.
-It adds:
-
-- a new platform-independent NAND-wide flag NAND_DONT_CREATE_BBT
-- one user of this flag, namely s3c24x0
-
-Experimental.
-
-- Werner Almesberger <werner@openmoko.org>
-
-
-Index: u-boot/cpu/arm920t/s3c24x0/nand.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c	2007-02-16 23:53:29.000000000 +0100
-+++ u-boot/cpu/arm920t/s3c24x0/nand.c	2007-02-16 23:53:54.000000000 +0100
-@@ -169,7 +169,7 @@
- 
- 	nand->eccmode = NAND_ECC_SOFT;
- #ifdef CONFIG_S3C2410_NAND_BBT
--	nand->options = NAND_USE_FLASH_BBT;
-+	nand->options = NAND_USE_FLASH_BBT | NAND_DONT_CREATE_BBT;
- #else
- 	nand->options = 0;
- #endif
-Index: u-boot/drivers/nand/nand_bbt.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_bbt.c	2007-02-16 23:53:36.000000000 +0100
-+++ u-boot/drivers/nand/nand_bbt.c	2007-02-16 23:53:54.000000000 +0100
-@@ -678,7 +678,8 @@
- 		}
- create:
- 		/* Create the bad block table by scanning the device ? */
--		if (!(td->options & NAND_BBT_CREATE))
-+		if (!(td->options & NAND_BBT_CREATE) ||
-+		  (this->options & NAND_DONT_CREATE_BBT))
- 			continue;
- 
- 		/* Create the table in memory by scanning the chip(s) */
-Index: u-boot/include/linux/mtd/nand.h
-===================================================================
---- u-boot.orig/include/linux/mtd/nand.h	2007-02-16 23:53:08.000000000 +0100
-+++ u-boot/include/linux/mtd/nand.h	2007-02-16 23:53:54.000000000 +0100
-@@ -187,7 +187,8 @@
-  * This can only work if we have the ecc bytes directly behind the
-  * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
- #define NAND_HWECC_SYNDROME	0x00020000
--
-+/* Do not create an BBT if none is found. Overrides NAND_BBT_CREATE. */
-+#define NAND_DONT_CREATE_BBT	0x00040000
- 
- /* Options set by nand scan */
- /* Nand scan has allocated oob_buf */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-scan-second.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-scan-second.patch
deleted file mode 100644
index 37b2807908..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-scan-second.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-Scan also the second OOB page for bad block information.
-
-board/neo1973/gta01/nand.c (board_nand_init): added board-specific badblock
-  pattern which sets NAND_BBT_SCAN2NDPAGE
-drivers/nand/nand_base.c (nand_block_bad): also consider the second page in a
-  block if NAND_BBT_SCAN2NDPAGE is set
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/board/neo1973/gta01/nand.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/nand.c
-+++ u-boot/board/neo1973/gta01/nand.c
-@@ -113,9 +113,23 @@
- }
- 
- 
-+/* Derived from drivers/nand/nand_bbt.c:smallpage_flashbased */
-+
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+
-+static struct nand_bbt_descr badblock_pattern = {
-+	.options =
-+	    NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES | NAND_BBT_SCAN2NDPAGE,
-+	.offs = 5,
-+	.len = 1,
-+	.pattern = scan_ff_pattern
-+};
-+
-+
- int board_nand_init(struct nand_chip *nand)
- {
- 	nand->read_otp = samsung_nand_read_otp;
- 	nand->write_otp = samsung_nand_write_otp;
-+	nand->badblock_pattern = &badblock_pattern;
- 	return s3c24x0_nand_init(nand);
- }
-Index: u-boot/drivers/nand/nand_base.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_base.c
-+++ u-boot/drivers/nand/nand_base.c
-@@ -421,7 +421,7 @@
-  *
-  * Check, if the block is bad.
-  */
--static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+static int nand_block_bad_page(struct mtd_info *mtd, loff_t ofs, int getchip)
- {
- 	int page, chipnr, res = 0;
- 	struct nand_chip *this = mtd->priv;
-@@ -460,6 +460,18 @@
- 	return res;
- }
- 
-+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (nand_block_bad_page(mtd, ofs, getchip))
-+		return 1;
-+	if (this->badblock_pattern->options & NAND_BBT_SCAN2NDPAGE &&
-+	    nand_block_bad_page(mtd, ofs+(1 << this->page_shift), getchip))
-+		return 1;
-+	return 0;
-+}
-+
- /**
-  * nand_default_block_markbad - [DEFAULT] mark a block bad
-  * @mtd:	MTD device structure
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-and-nand.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-and-nand.patch
deleted file mode 100644
index fa0de39ab7..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-and-nand.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-Auto-detect whether we're booting from RAM or NAND, and act accordingly. This
-allows us to use the same u-boot binary for all boot modes.
-
-include/configs/neo1973.h: introduced new config option
-  CONFIG_LL_INIT_NAND_ONLY to perform low-level initialization only when
-  booting from NAND
-include/configs/neo1973.h: got rid of BUILD_FOR_RAM
-cpu/arm920t/start.S: detect if we need to boot from NAND at run time (i.e., if
-  we're running at address 0)
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -157,18 +157,26 @@
- 	str	r1, [r0]
- #endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 */
- 
--	/*
--	 * we do sys-critical inits only at reboot,
--	 * not when booting from ram!
--	 */
- #ifndef CONFIG_SKIP_LOWLEVEL_INIT
-+#ifndef CONFIG_LL_INIT_NAND_ONLY
- 	bl	cpu_init_crit
- #endif
-+#endif
- 
- #ifndef CONFIG_SKIP_RELOCATE_UBOOT
--#ifndef CONFIG_S3C2410_NAND_BOOT
--relocate:				/* relocate U-Boot to RAM	    */
- 	adr	r0, _start		/* r0 <- current position of code   */
-+
-+#ifdef CONFIG_S3C2410_NAND_BOOT
-+					/* are we running from NAND ?	    */
-+#define	BWSCON	0x48000000
-+	ldr	r1, =BWSCON		/* Z = CPU booted from NAND	    */
-+	ldr	r1, [r1]
-+	tst	r1, #6			/* BWSCON[2:1] = OM[1:0]	    */
-+	teqeq	r0, #0			/* Z &= running at address 0	    */
-+	beq	nand_load
-+#endif /* CONFIG_S3C2410_NAND_BOOT */
-+
-+relocate:				/* relocate U-Boot to RAM	    */
- 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
- 	cmp     r0, r1                  /* don't reloc during debug         */
- 	beq     done_relocate
-@@ -188,10 +196,13 @@
- 	ldr	pc, _done_relocate	/* jump to relocated code */
- _done_relocate:
- 	.word	done_relocate
--done_relocate:
--#else /* NAND_BOOT */
--relocate:
--copy_myself:
-+
-+#ifdef CONFIG_S3C2410_NAND_BOOT
-+nand_load:
-+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY)
-+	bl	cpu_init_crit
-+#endif
-+
- 	/* mov	r10, lr */
- 
- 	@ reset NAND
-@@ -275,7 +286,8 @@
- #endif
- 1:	b	1b
- done_nand_read:
--#endif /* NAND_BOOT */
-+#endif /* CONFIG_S3C2410_NAND_BOOT */
-+done_relocate:
- #endif /* CONFIG_SKIP_RELOCATE_UBOOT */
- 
- 	/* Set up the stack						    */
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -26,14 +26,10 @@
- #ifndef __CONFIG_H
- #define __CONFIG_H
- 
--#if defined(BUILD_FOR_RAM)
--/* If we want to start u-boot from inside RAM */
--#define CONFIG_SKIP_LOWLEVEL_INIT	1
--#else
--/* we want to start u-boot directly from within NAND flash */
-+/* we want to be able to start u-boot directly from within NAND flash */
-+#define CONFIG_LL_INIT_NAND_ONLY
- #define CONFIG_S3C2410_NAND_BOOT	1
- #define CONFIG_S3C2410_NAND_SKIP_BAD	1
--#endif
- 
- #define CFG_UBOOT_SIZE		0x40000 /* size of u-boot, for NAND loading */
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-reloc.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-reloc.patch
deleted file mode 100644
index 53a3e05c67..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-reloc.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-This patch allows us to boot from anywhere in RAM. It mainly sets the stage
-for later patches. The only real changes here is the better handling of already
-cached code (e.g., if we were started by a previous instance of u-boot), and
-that we drop CONFIG_SKIP_RELOCATE_UBOOT from neo1973.h
-
-cpu/arm920t/start.S: if not relocating, instead of going straight to
-  stack_setup, jump to done_relocate, which may perform other setup tasks
-cpu/arm920t/start.S: after relocating, flush the cache and jump to the new code
-include/configs/neo1973.h: remove CONFIG_SKIP_RELOCATE_UBOOT
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -171,7 +171,7 @@ relocate:				/* relocate U-Boot to RAM	 
- 	adr	r0, _start		/* r0 <- current position of code   */
- 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
- 	cmp     r0, r1                  /* don't reloc during debug         */
--	beq     stack_setup
-+	beq     done_relocate
- 
- 	ldr	r2, _armboot_start
- 	ldr	r3, _bss_start
-@@ -181,8 +181,14 @@ relocate:				/* relocate U-Boot to RAM	 
- copy_loop:
- 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
- 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
--	cmp	r0, r2			/* until source end addreee [r2]    */
-+	cmp	r0, r2			/* until source end address [r2]    */
- 	ble	copy_loop
-+	mov	r0, #0			/* flush v3/v4 cache */
-+	mcr	p15, 0, r0, c7, c7, 0
-+	ldr	pc, _done_relocate	/* jump to relocated code */
-+_done_relocate:
-+	.word	done_relocate
-+done_relocate:
- #else /* NAND_BOOT */
- relocate:
- copy_myself:
-@@ -270,7 +276,7 @@ notmatch:
- 1:	b	1b
- done_nand_read:
- #endif /* NAND_BOOT */
--#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-+#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
- 
- 	/* Set up the stack						    */
- stack_setup:
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -28,7 +28,6 @@
- 
- #if defined(BUILD_FOR_RAM)
- /* If we want to start u-boot from inside RAM */
--#define CONFIG_SKIP_RELOCATE_UBOOT	1
- #define CONFIG_SKIP_LOWLEVEL_INIT	1
- #else
- /* we want to start u-boot directly from within NAND flash */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-menu.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-menu.patch
deleted file mode 100644
index b524ace65d..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-menu.patch
+++ /dev/null
@@ -1,769 +0,0 @@
-board/neo1973/bootmenu.c: simple configurable boot menu
-board/neo1973/neo1973.c (neo1973_new_second): return 1 if a new second has
-  started since the last call
-board/neo1973/neo1973.c (neo1973_on_key_pressed): return 1 if the $POWER key is
-  pressed
-board/neo1973/neo1973.c (board_late_init): make use of neo1973_new_second and
-  neo1973_on_key_pressed
-board/neo1973/neo1973.h: added function prototypes
-u-boot/board/neo1973/neo1973.c (board_late_init): enter the boot menu when 
-  "AUX" was pressed at least half the time
-u-boot/board/neo1973/neo1973.c (board_late_init): minor code cleanup
-u-boot/common/console.c, include/console.h: added "console_poll_hook" to be
-  called when waiting for console in put in "getc" and "tstc"
-board/neo1973/neo1973.c (board_late_init): poll for the boot menu also on RAM
-  boot, reset, or unknown cause
-board/neo1973/neo1973.c (board_late_init): don't look for the power key if
-  woken up by the charger
-board/neo1973/neo1973.h, board/neo1973/neo1973.c, board/neo1973/bootmenu.c:
-  renamed neo1973_911_key_pressed to neo1973_aux_key_pressed
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/board/neo1973/common/bootmenu.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/bootmenu.c
-@@ -0,0 +1,120 @@
-+/*
-+ * bootmenu.c - Boot menu
-+ *
-+ * Copyright (C) 2006-2007 by Openmoko, Inc.
-+ * Written by Werner Almesberger <werner@openmoko.org>
-+ * All Rights Reserved
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+
-+
-+#include <common.h>
-+#include <environment.h>
-+#include <bootmenu.h>
-+#include <asm/atomic.h>
-+
-+#ifdef CONFIG_USBD_DFU
-+#include "usbdcore.h"
-+#include "usb_dfu.h"
-+#endif
-+
-+#include "neo1973.h"
-+
-+
-+#define DEBOUNCE_LOOPS		1000	/* wild guess */
-+
-+
-+static int debounce(int (*fn)(void), int *last)
-+{
-+	int on, i;
-+
-+again:
-+	on = fn();
-+	if (on != *last)
-+		for (i = DEBOUNCE_LOOPS; i; i--)
-+			if (on != fn())
-+				goto again;
-+	*last = on;
-+	return on;
-+}
-+
-+
-+static int aux_key(void *user)
-+{
-+	static int last_aux = -1;
-+
-+	return debounce(neo1973_aux_key_pressed, &last_aux);
-+}
-+
-+
-+static int on_key(void *user)
-+{
-+	static int last_on = -1;
-+
-+	return debounce(neo1973_on_key_pressed, &last_on);
-+}
-+
-+
-+static void factory_reset(void *user)
-+{
-+	default_env();
-+	run_command("dynpart", 0);
-+	run_command("bootd", 0);
-+}
-+
-+
-+static int seconds(void *user)
-+{
-+	return neo1973_new_second();
-+}
-+
-+
-+static int system_idle(void)
-+{
-+#ifdef  CONFIG_USBD_DFU
-+	if (system_dfu_state)
-+		return *system_dfu_state == DFU_STATE_appIDLE;
-+#endif
-+        return 1;
-+}
-+
-+
-+static void poweroff_if_idle(void *user)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	if (system_idle())
-+		neo1973_poweroff();
-+	local_irq_restore(flags);
-+}
-+
-+
-+static struct bootmenu_setup bootmenu_setup = {
-+	.next_key = aux_key,
-+	.enter_key = on_key,
-+	.seconds = seconds,
-+	.idle_action = poweroff_if_idle,
-+};
-+
-+
-+void neo1973_bootmenu(void)
-+{
-+	bootmenu_add("Boot", NULL, "bootd");
-+	bootmenu_init(&bootmenu_setup);
-+	bootmenu_add("Factory reset", factory_reset, NULL);
-+	bootmenu();
-+}
-Index: u-boot/board/neo1973/gta01/gta01.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/gta01.c
-+++ u-boot/board/neo1973/gta01/gta01.c
-@@ -229,10 +229,15 @@ int board_late_init(void)
- 	extern unsigned char booted_from_nand;
- 	unsigned char tmp;
- 	char buf[32];
-+	int menu_vote = 0; /* <= 0: no, > 0: yes */
-+	int seconds = 0;
- 
- 	/* Initialize the Power Management Unit with a safe register set */
- 	pcf50606_init();
- 
-+	/* if there's no other reason, must be regular reset */
-+	neo1973_wakeup_cause = NEO1973_WAKEUP_RESET;
-+
- 	if (!booted_from_nand)
- 		goto woken_by_reset;
- 
-@@ -242,45 +247,41 @@ int board_late_init(void)
- 	setenv("pcf50606_int1", buf);
- 
- 	if (tmp & PCF50606_INT1_ALARM) {
--		/* we've been woken up by RTC alarm or charger insert, boot */
-+		/* we've been woken up by RTC alarm, boot */
- 		neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM;
- 		goto continue_boot;
- 	}
- 	if (tmp & PCF50606_INT1_EXTONR) {
-+		/* we've been woken up by charger insert */
- 		neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER;
- 	}
- 
- 	if (tmp & PCF50606_INT1_ONKEYF) {
--		int seconds = 0;
--		neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY;
- 		/* we've been woken up by a falling edge of the onkey */
-+		neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY;
-+	}
- 
--		/* we can't just setenv(bootdelay,-1) because that would
--		 * accidentially become permanent if the user does saveenv */
--		if (neo1973_911_key_pressed())
--			nobootdelay = 1;
--
--		while (1) {
--			u_int8_t int1, oocs;
--
--			oocs = pcf50606_reg_read(PCF50606_REG_OOCS);
--			if (oocs & PFC50606_OOCS_ONKEY)
--				break;
--
--			int1 = pcf50606_reg_read(PCF50606_REG_INT1);
--			if (int1 & PCF50606_INT1_SECOND)
--				seconds++;
--
--			if (seconds >= POWER_KEY_SECONDS)
--				goto continue_boot;
--		}
--		/* Power off if minimum number of seconds not reached */
--		neo1973_poweroff();
-+	if (neo1973_wakeup_cause == NEO1973_WAKEUP_CHARGER) {
-+		/* if we still think it was only a charger insert, boot */
-+		goto continue_boot;
- 	}
- 
- woken_by_reset:
--	/* if there's no other reason, must be regular reset */
--	neo1973_wakeup_cause = NEO1973_WAKEUP_RESET;
-+
-+	while (neo1973_wakeup_cause == NEO1973_WAKEUP_RESET ||
-+	    neo1973_on_key_pressed()) {
-+		if (neo1973_aux_key_pressed())
-+			menu_vote++;
-+		else
-+			menu_vote--;
-+
-+		if (neo1973_new_second())
-+			seconds++;
-+		if (seconds >= POWER_KEY_SECONDS)
-+			goto continue_boot;
-+	}
-+	/* Power off if minimum number of seconds not reached */
-+	neo1973_poweroff();
- 
- continue_boot:
- 	jbt6k74_init();
-@@ -304,6 +305,11 @@ continue_boot:
- 	}
- #endif
- 
-+	if (menu_vote > 0) {
-+		neo1973_bootmenu();
-+		nobootdelay = 1;
-+	}
-+
- 	return 0;
- }
- 
-@@ -369,7 +375,17 @@ void neo1973_vibrator(int on)
- #endif
- }
- 
--int neo1973_911_key_pressed(void)
-+int neo1973_new_second(void)
-+{
-+	return pcf50606_reg_read(PCF50606_REG_INT1) & PCF50606_INT1_SECOND;
-+}
-+
-+int neo1973_on_key_pressed(void)
-+{
-+	return !(pcf50606_reg_read(PCF50606_REG_OOCS) & PFC50606_OOCS_ONKEY);
-+}
-+
-+int neo1973_aux_key_pressed(void)
- {
- 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- 	if (gpio->GPFDAT & (1 << 6))
-Index: u-boot/board/neo1973/gta01/Makefile
-===================================================================
---- u-boot.orig/board/neo1973/gta01/Makefile
-+++ u-boot/board/neo1973/gta01/Makefile
-@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
- 
- LIB	= lib$(BOARD).a
- 
--OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o
-+OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o
- SOBJS	:= ../common/lowlevel_init.o
- 
- .PHONY:	all
-Index: u-boot/board/neo1973/common/neo1973.h
-===================================================================
---- u-boot.orig/board/neo1973/common/neo1973.h
-+++ u-boot/board/neo1973/common/neo1973.h
-@@ -29,4 +29,10 @@ int neo1973_911_key_pressed(void);
- const char *neo1973_get_charge_status(void);
- int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd);
- 
-+int neo1973_new_second(void);
-+int neo1973_on_key_pressed(void);
-+int neo1973_aux_key_pressed(void);
-+
-+void neo1973_bootmenu(void);
-+
- #endif
-Index: u-boot/common/console.c
-===================================================================
---- u-boot.orig/common/console.c
-+++ u-boot/common/console.c
-@@ -160,8 +160,12 @@ void fprintf (int file, const char *fmt,
- 
- /** U-Boot INITIAL CONSOLE-COMPATIBLE FUNCTION *****************************/
- 
-+void (*console_poll_hook)(int activity);
-+
- int getc (void)
- {
-+	while (console_poll_hook && !tstc());
-+
- 	if (gd->flags & GD_FLG_DEVINIT) {
- 		/* Get from the standard input */
- 		return fgetc (stdin);
-@@ -171,7 +175,7 @@ int getc (void)
- 	return serial_getc ();
- }
- 
--int tstc (void)
-+static int do_tstc (void)
- {
- 	if (gd->flags & GD_FLG_DEVINIT) {
- 		/* Test the standard input */
-@@ -182,6 +186,16 @@ int tstc (void)
- 	return serial_tstc ();
- }
- 
-+int tstc (void)
-+{
-+	int ret;
-+
-+	ret = do_tstc();
-+	if (console_poll_hook)
-+		console_poll_hook(ret);
-+	return ret;
-+}
-+
- void putc (const char c)
- {
- #ifdef CONFIG_SILENT_CONSOLE
-Index: u-boot/include/console.h
-===================================================================
---- u-boot.orig/include/console.h
-+++ u-boot/include/console.h
-@@ -33,6 +33,8 @@
- extern device_t	*stdio_devices[] ;
- extern char *stdio_names[MAX_FILES] ;
- 
-+extern void (*console_poll_hook)(int activity);
-+
- int console_realloc(int top);
- 
- #endif
-Index: u-boot/common/Makefile
-===================================================================
---- u-boot.orig/common/Makefile
-+++ u-boot/common/Makefile
-@@ -50,7 +50,8 @@ COBJS	= main.o ACEX1K.o altera.o bedbug.
- 	  memsize.o miiphybb.o miiphyutil.o \
- 	  s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \
- 	  usb.o usb_kbd.o usb_storage.o \
--	  virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o
-+	  virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o \
-+	  bootmenu.o
- 
- SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
- OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
-Index: u-boot/common/bootmenu.c
-===================================================================
---- /dev/null
-+++ u-boot/common/bootmenu.c
-@@ -0,0 +1,311 @@
-+/*
-+ * bootmenu.c - Boot menu
-+ *
-+ * Copyright (C) 2006-2007 by Openmoko, Inc.
-+ * Written by Werner Almesberger <werner@openmoko.org>
-+ * All Rights Reserved
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+
-+
-+#include <common.h>
-+
-+#ifdef CFG_BOOTMENU
-+
-+#include <malloc.h>
-+#include <devices.h>
-+#include <console.h>
-+#include <bootmenu.h>
-+
-+
-+extern const char version_string[];
-+
-+
-+#define ANSI_CLEAR	"\e[2J"
-+#define ANSI_REVERSE	"\e[7m"
-+#define	ANSI_NORMAL	"\e[m"
-+#define ANSI_GOTOYX	"\e[%d;%dH"
-+
-+/*
-+ * MIN_BOOT_MENU_TIMEOUT ensures that users can't by accident set the timeout
-+ * unusably short.
-+ */
-+#define MIN_BOOT_MENU_TIMEOUT	10	/* 10 seconds */
-+#define BOOT_MENU_TIMEOUT	60	/* 60 seconds */
-+#define AFTER_COMMAND_WAIT	3	/* wait (2,3] after running commands */
-+#define	MAX_MENU_ITEMS		10	/* cut off after that many */
-+
-+#define	TOP_ROW		2
-+#define	MENU_0_ROW	(TOP_ROW+5)
-+
-+
-+struct option {
-+	const char *label;
-+	void (*fn)(void *user);	/* run_command if NULL */
-+	void *user;
-+};
-+
-+
-+static const struct bootmenu_setup *setup;
-+static struct option options[MAX_MENU_ITEMS];
-+static int num_options = 0;
-+static int max_width = 0;
-+
-+static device_t *bm_con;
-+
-+
-+static void bm_printf(const char *fmt, ...)
-+{
-+	va_list args;
-+	char printbuffer[CFG_PBSIZE];
-+
-+	va_start(args, fmt);
-+	vsprintf(printbuffer, fmt, args);
-+	va_end(args);
-+
-+	bm_con->puts(printbuffer);
-+}
-+
-+
-+static char *get_option(int n)
-+{
-+	char name[] = "menu_XX";
-+
-+	sprintf(name+5, "%d", n);
-+	return getenv(name);
-+}
-+
-+
-+static void print_option(const struct option *option, int reverse)
-+{
-+	int n = option-options;
-+
-+	bm_printf(ANSI_GOTOYX, MENU_0_ROW+n, 1);
-+	if (reverse)
-+		bm_printf(ANSI_REVERSE);
-+	bm_printf("  %-*s  ", max_width, option->label);
-+	if (reverse)
-+		bm_printf(ANSI_NORMAL);
-+}
-+
-+
-+static int get_var_positive_int(char *var, int default_value)
-+{
-+	const char *s;
-+	char *end;
-+	int n;
-+
-+	s = getenv(var);
-+	if (!s)
-+		return default_value;
-+        n = simple_strtoul(s, &end, 0);
-+	if (!*s || *end || n < 1)
-+		return default_value;
-+	return n;
-+}
-+
-+
-+static void show_bootmenu(void)
-+{
-+	const struct option *option;
-+
-+	bm_printf(ANSI_CLEAR ANSI_GOTOYX "%s", TOP_ROW, 1, version_string);
-+	bm_printf(ANSI_GOTOYX "*** BOOT MENU ***", TOP_ROW+3, 1);
-+	bm_printf(ANSI_GOTOYX, MENU_0_ROW, 1);
-+
-+	for (option = options; option != options+num_options; option++)
-+		print_option(option, option == options);
-+
-+	bm_printf("\n\nPress [AUX] to select, [POWER] to execute.\n");
-+}
-+
-+
-+static void redirect_console(int grab)
-+{
-+	static device_t *orig_stdout, *orig_stderr;
-+
-+	if (grab) {
-+		orig_stdout = stdio_devices[stdout];
-+		orig_stderr = stdio_devices[stderr];
-+		stdio_devices[stdout] = bm_con;
-+		stdio_devices[stderr] = bm_con;
-+	}
-+	else {
-+		/*
-+		 * Make this conditional, because the command may also change
-+		 * the console.
-+		 */
-+		if (stdio_devices[stdout] == bm_con)
-+			stdio_devices[stdout] = orig_stdout;
-+		if (stdio_devices[stderr] == bm_con)
-+			stdio_devices[stderr] = orig_stderr;
-+	}
-+}
-+
-+
-+static void do_option(const struct option *option)
-+{
-+	int seconds, aux;
-+
-+	bm_printf(ANSI_CLEAR ANSI_GOTOYX, 1, 1);
-+	redirect_console(1);
-+
-+	if (option->fn)
-+		option->fn(option->user);
-+	else
-+		run_command(option->user, 0);
-+
-+	redirect_console(0);
-+	seconds = get_var_positive_int("after_command_wait",
-+	    AFTER_COMMAND_WAIT);
-+	if (seconds)
-+		bm_printf("\nPress [AUX] to %s.",
-+		    option ? "return to boot menu" : "power off");
-+	aux = 1; /* require up-down transition */
-+	while (seconds) {
-+		int tmp;
-+
-+		tmp = setup->next_key(setup->user);
-+		if (tmp && !aux)
-+			break;
-+		aux = tmp;
-+		if (setup->seconds(setup->user))
-+			seconds--;
-+	}
-+	if (!option)
-+		setup->idle_action(setup->idle_action);
-+	show_bootmenu();
-+}
-+
-+
-+static void bootmenu_hook(int activity)
-+{
-+	static int aux = 1, on = 1;
-+	static const struct option *option = options;
-+	static int seconds = 0;
-+	int tmp;
-+
-+	if (activity)
-+		seconds = 0;
-+	tmp = setup->next_key(setup->user);
-+	if (tmp && !aux) {
-+		print_option(option, 0);
-+		option++;
-+		if (option == options+num_options)
-+			option = options;
-+		print_option(option, 1);
-+		seconds = 0;
-+	}
-+	aux = tmp;
-+	tmp = setup->enter_key(setup->user);
-+	if (tmp && !on) {
-+		do_option(option);
-+		option = options;
-+		seconds = 0;
-+	}
-+	on = tmp;
-+	if (setup->seconds(setup->user)) {
-+		int timeout;
-+
-+		timeout = get_var_positive_int("boot_menu_timeout",
-+		    BOOT_MENU_TIMEOUT);
-+		if (timeout < MIN_BOOT_MENU_TIMEOUT)
-+			timeout = MIN_BOOT_MENU_TIMEOUT;
-+		if (++seconds > timeout) {
-+			setup->idle_action(setup->idle_action);
-+			seconds = 0;
-+		}
-+	}
-+}
-+
-+
-+static device_t *find_console(const char *name)
-+{
-+	int i;
-+
-+	for (i = 1; i != ListNumItems(devlist); i++) {
-+		device_t *dev = ListGetPtrToItem(devlist, i);
-+
-+		if (!strcmp(name, dev->name))
-+			if (dev->flags & DEV_FLAGS_OUTPUT)
-+				return dev;
-+	}
-+	return NULL;
-+}
-+
-+
-+void bootmenu_add(const char *label, void (*fn)(void *user), void *user)
-+{
-+	int len;
-+
-+	options[num_options].label = label;
-+	options[num_options].fn = fn;
-+	options[num_options].user = user;
-+	num_options++;
-+
-+	len = strlen(label);
-+	if (len > max_width)
-+		max_width = len;
-+}
-+
-+
-+void bootmenu_init(struct bootmenu_setup *__setup)
-+{
-+	int n;
-+
-+	setup = __setup;
-+	for (n = 1; n != MAX_MENU_ITEMS+1; n++) {
-+		const char *spec, *colon;
-+
-+		spec = get_option(n);
-+		if (!spec)
-+			continue;
-+		colon = strchr(spec, ':');
-+		if (!colon)
-+			bootmenu_add(spec, NULL, (char *) spec);
-+		else {
-+			char *label;
-+			int len = colon-spec;
-+
-+			label = malloc(len+1);
-+			if (!label)
-+				return;
-+			memcpy(label, spec, len);
-+			label[len] = 0;
-+			bootmenu_add(label, NULL, (char *) colon+1);
-+		}
-+	}
-+}
-+
-+
-+void bootmenu(void)
-+{
-+	bm_con = find_console("vga");
-+	if (bm_con && bm_con->start && bm_con->start() < 0)
-+		bm_con = NULL;
-+	if (!bm_con)
-+		bm_con = stdio_devices[stdout];
-+	if (!bm_con)
-+		return;
-+#if 0
-+	console_assign(stdout, "vga");
-+	console_assign(stderr, "vga");
-+#endif
-+	show_bootmenu();
-+	console_poll_hook = bootmenu_hook;
-+}
-+
-+#endif /* CFG_BOOTMENU */
-Index: u-boot/include/bootmenu.h
-===================================================================
---- /dev/null
-+++ u-boot/include/bootmenu.h
-@@ -0,0 +1,71 @@
-+/*
-+ * bootmenu.h - Boot menu
-+ *
-+ * Copyright (C) 2006-2007 by Openmoko, Inc.
-+ * Written by Werner Almesberger <werner@openmoko.org>
-+ * All Rights Reserved
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+
-+#ifndef BOOTMENU_H
-+#define BOOTMENU_H
-+
-+#define MIN_BOOT_MENU_TIMEOUT	10	/* 10 seconds */
-+#define BOOT_MENU_TIMEOUT	60	/* 60 seconds */
-+#define AFTER_COMMAND_WAIT	3	/* wait (2,3] after running commands */
-+#define MAX_MENU_ITEMS		10	/* cut off after that many */
-+
-+
-+struct bootmenu_setup {
-+	/* non-zero while the "next" key is being pressed */
-+	int (*next_key)(void *user);
-+
-+	/* non-zero while the "enter" key is being pressed */
-+	int (*enter_key)(void *user);
-+
-+	/* return the number of seconds that have passed since the last call
-+	   to "seconds". It's okay to limit the range to [0, 1]. */
-+	int (*seconds)(void *user);
-+
-+	/* action to take if the boot menu times out */
-+	void (*idle_action)(void *user);
-+
-+	/* user-specific data, passes "as is" to the functions above */
-+	void *user;
-+};
-+
-+
-+/*
-+ * Initialize the menu from the environment.
-+ */
-+
-+void bootmenu_init(struct bootmenu_setup *setup);
-+
-+/*
-+ * To add entries on top of the boot menu, call bootmenu_add before
-+ * bootmenu_init. To add entries at the end, call it after bootmenu_init.
-+ * If "fn" is NULL, the command specified in "user" is executed.
-+ */
-+
-+void bootmenu_add(const char *label, void (*fn)(void *user), void *user);
-+
-+/*
-+ * Run the boot menu.
-+ */
-+
-+void bootmenu(void);
-+
-+#endif /* !BOOTMENU_H */
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -160,6 +160,8 @@
- /* valid baudrates */
- #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
- 
-+#define CFG_BOOTMENU
-+
- /*-----------------------------------------------------------------------
-  * Stack sizes
-  *
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/cmd-unzip.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/cmd-unzip.patch
deleted file mode 100644
index ee4c1984fc..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/cmd-unzip.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
-  memory to memory, and option CONFIG_UNZIP to enable it
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/common/cmd_mem.c
-===================================================================
---- u-boot.orig/common/cmd_mem.c
-+++ u-boot/common/cmd_mem.c
-@@ -1148,6 +1148,34 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int fl
- }
- #endif	/* CONFIG_CRC32_VERIFY */
- 
-+
-+#ifdef CONFIG_UNZIP
-+int  gunzip (void *, int, unsigned char *, unsigned long *);
-+
-+int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	unsigned long src, dst;
-+	unsigned long src_len = ~0UL, dst_len = ~0UL;
-+	int err;
-+
-+	switch (argc) {
-+		case 4:
-+			dst_len = simple_strtoul(argv[3], NULL, 16);
-+			/* fall through */
-+		case 3:
-+			src = simple_strtoul(argv[1], NULL, 16);
-+			dst = simple_strtoul(argv[2], NULL, 16);
-+			break;
-+		default:
-+			printf ("Usage:\n%s\n", cmdtp->usage);
-+			return 1;
-+	}
-+
-+	return !!gunzip((void *) dst, dst_len, (void *) src, &src_len);
-+}
-+#endif /* CONFIG_UNZIP */
-+
-+
- /**************************************************/
- #if (CONFIG_COMMANDS & CFG_CMD_MEMORY)
- U_BOOT_CMD(
-@@ -1251,5 +1279,13 @@ U_BOOT_CMD(
- );
- #endif /* CONFIG_MX_CYCLIC */
- 
-+#ifdef CONFIG_UNZIP
-+U_BOOT_CMD(
-+	unzip,	4,	1,	do_unzip,
-+	"unzip - unzip a memory region\n",
-+	"srcaddr dstaddr [dstsize]\n"
-+);
-+#endif /* CONFIG_UNZIP */
-+
- #endif
- #endif	/* CFG_CMD_MEMORY */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/console-ansi.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/console-ansi.patch
deleted file mode 100644
index 2ac5b75dee..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/console-ansi.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-drivers/cfb_console.c: added processing of ANSI escape sequences \e[2J, \e[m,
-  \e[7m, and \e[row;colH
-drivers/cfb_console.c (video_putc): make \r return to the beginning of the line
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/drivers/cfb_console.c
-===================================================================
---- u-boot.orig/drivers/cfb_console.c
-+++ u-boot/drivers/cfb_console.c
-@@ -181,6 +181,7 @@ CONFIG_VIDEO_HW_CURSOR:	     - Uses the 
- 
- #include <version.h>
- #include <linux/types.h>
-+#include <linux/ctype.h>
- #include <devices.h>
- #include <video_font.h>
- #ifdef CFG_CMD_DATE
-@@ -676,10 +677,96 @@ static void console_newline (void)
- 
- /*****************************************************************************/
- 
-+static enum {
-+	CS_NORMAL = 0,
-+	CS_ESC,
-+	CS_NUM1,
-+	CS_NUM2,
-+} state = 0;
-+
-+static int num1, num2;
-+
-+
-+static void swap_drawing_colors(void)
-+{
-+	eorx = fgx;
-+	fgx = bgx;
-+	bgx = eorx;
-+	eorx = fgx ^ bgx;
-+}
-+
-+
-+static void process_sequence(char c)
-+{
-+	static int inverted = 0;
-+	int i, inv;
-+
-+	switch (c) {
-+		case 'J':
-+			/* assume num1 == 2 */
-+			for (i = 0; i != CONSOLE_ROWS; i++)
-+				console_scrollup();
-+			break;
-+		case 'H':
-+			if (num1 > CONSOLE_ROWS || num2 > CONSOLE_COLS)
-+				break;
-+			console_col = num2 ? num2-1 : 0;
-+			console_row = num1 ? num1-1 : 0;
-+			break;
-+		case 'm':
-+			inv = num1 == 7;
-+			if (num1 && !inv)
-+				break;
-+			if (inverted != inv)
-+				swap_drawing_colors();
-+			inverted = inv;
-+			break;
-+	}
-+}
-+
-+
-+static void escape_sequence(char c)
-+{
-+	switch (state) {
-+		case CS_ESC:
-+			state = c == '[' ? CS_NUM1 : CS_NORMAL;
-+			num1 = num2 = 0;
-+			break;
-+		case CS_NUM1:
-+			if (isdigit(c))
-+				num1 = num1*10+c-'0';
-+			else if (c == ';')
-+				state = CS_NUM2;
-+			else {
-+				process_sequence(c);
-+				state = CS_NORMAL;
-+			}
-+			break;
-+		case CS_NUM2:
-+			if (isdigit(c))
-+				num2 = num2*10+c-'0';
-+			else {
-+				process_sequence(c);
-+				state = CS_NORMAL;
-+			}
-+		default:
-+			/* can't happen */;
-+	}
-+}
-+
-+
- void video_putc (const char c)
- {
-+	if (state) {
-+		escape_sequence(c);
-+		CURSOR_SET;
-+		return;
-+	}
-+
- 	switch (c) {
--	case 13:		/* ignore */
-+	case 13:		/* return to beginning of line */
-+		CURSOR_OFF;
-+		console_col = 0;
- 		break;
- 
- 	case '\n':		/* next line */
-@@ -698,6 +785,10 @@ void video_putc (const char c)
- 		console_back ();
- 		break;
- 
-+	case '\e':
-+		state = CS_ESC;
-+		break;
-+
- 	default:		/* draw the char */
- 		video_putchar (console_col * VIDEO_FONT_WIDTH,
- 			       console_row * VIDEO_FONT_HEIGHT,
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/default-env.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/default-env.patch
deleted file mode 100644
index b9ae4f29fe..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/default-env.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-common/env_common.c (default_env): new function that resets the environment to
-  the default value
-common/env_common.c (env_relocate): use default_env instead of own copy
-common/env_nand.c (env_relocate_spec): use default_env instead of own copy
-include/environment.h: added default_env prototype
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/common/env_common.c
-===================================================================
---- u-boot.orig/common/env_common.c
-+++ u-boot/common/env_common.c
-@@ -202,6 +202,25 @@ uchar *env_get_addr (int index)
- 	}
- }
- 
-+void default_env(void)
-+{
-+	if (sizeof(default_environment) > ENV_SIZE)
-+	{
-+		puts ("*** Error - default environment is too large\n\n");
-+		return;
-+	}
-+
-+	memset (env_ptr, 0, sizeof(env_t));
-+	memcpy (env_ptr->data,
-+		default_environment,
-+		sizeof(default_environment));
-+#ifdef CFG_REDUNDAND_ENVIRONMENT
-+	env_ptr->flags = 0xFF;
-+#endif
-+	env_crc_update ();
-+	gd->env_valid = 1;
-+}
-+
- void env_relocate (void)
- {
- 	DEBUGF ("%s[%d] offset = 0x%lx\n", __FUNCTION__,__LINE__,
-@@ -245,23 +264,8 @@ void env_relocate (void)
- 		gd->env_valid = 0;
- #endif
- 
--	if (gd->env_valid == 0) {
--		if (sizeof(default_environment) > ENV_SIZE)
--		{
--			puts ("*** Error - default environment is too large\n\n");
--			return;
--		}
--
--		memset (env_ptr, 0, sizeof(env_t));
--		memcpy (env_ptr->data,
--			default_environment,
--			sizeof(default_environment));
--#ifdef CFG_REDUNDAND_ENVIRONMENT
--		env_ptr->flags = 0xFF;
--#endif
--		env_crc_update ();
--		gd->env_valid = 1;
--	}
-+	if (gd->env_valid == 0)
-+		default_env();
- 	else {
- 		env_relocate_spec ();
- 	}
-Index: u-boot/common/env_nand.c
-===================================================================
---- u-boot.orig/common/env_nand.c
-+++ u-boot/common/env_nand.c
-@@ -313,19 +313,7 @@ void env_relocate_spec (void)
- static void use_default()
- {
- 	puts ("*** Warning - bad CRC or NAND, using default environment\n\n");
--
--	if (default_environment_size > CFG_ENV_SIZE){
--		puts ("*** Error - default environment is too large\n\n");
--		return;
--	}
--
--	memset (env_ptr, 0, sizeof(env_t));
--	memcpy (env_ptr->data,
--			default_environment,
--			default_environment_size);
--	env_ptr->crc = crc32(0, env_ptr->data, ENV_SIZE);
--	gd->env_valid = 1;
--
-+	default_env();
- }
- #endif
- 
-Index: u-boot/include/environment.h
-===================================================================
---- u-boot.orig/include/environment.h
-+++ u-boot/include/environment.h
-@@ -107,4 +107,7 @@ typedef	struct environment_s {
- 	unsigned char	data[ENV_SIZE]; /* Environment data		*/
- } env_t;
- 
-+
-+void default_env(void);
-+
- #endif	/* _ENVIRONMENT_H_ */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/dontask.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/dontask.patch
deleted file mode 100644
index 23d4b13626..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/dontask.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-common/cmd_nand.c (yes): if the environment variable "dontask" is set to "y" or
-  "Y", non-interactively assume the answer was "yes". In all other cases, ask.
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/common/cmd_nand.c
-===================================================================
---- u-boot.orig/common/cmd_nand.c
-+++ u-boot/common/cmd_nand.c
-@@ -165,8 +165,12 @@ out:
- 
- static int yes(void)
- {
-+	char *s;
- 	char c;
- 
-+	s = getenv("dontask");
-+	if (s && (s[0] =='y' || s[0] == 'Y') && !s[1])
-+		return 1;
- 	c = getc();
- 	if (c != 'y' && c != 'Y')
- 		return 0;
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/dynenv-harden.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/dynenv-harden.patch
deleted file mode 100644
index e7eca4ede5..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/dynenv-harden.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-common/cmd_nand.c: globalized arg_off_size
-include/util.h: new header to convenience functions, such as arg_off_size
-common/cmd_dynenv.c (do_dynenv): use arg_off_size to sanity-check offset and to
-  allow use of partition name
-common/cmd_dynenv.c (do_dynenv): indicate in no uncertain terms when an update
-  would not work due to Flash bits already cleared
-common/cmd_dynenv.c (do_dynenv): update CFG_ENV_OFFSET after successful "dynenv
-  set", so that we can write the new environment without having to reboot
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/common/cmd_nand.c
-===================================================================
---- u-boot.orig/common/cmd_nand.c
-+++ u-boot/common/cmd_nand.c
-@@ -100,7 +100,7 @@ static inline int str2long(char *p, ulon
- 	return (*p != '\0' && *endptr == '\0') ? 1 : 0;
- }
- 
--static int
-+int
- arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size)
- {
- 	int idx = nand_curr_device;
-Index: u-boot/include/util.h
-===================================================================
---- /dev/null
-+++ u-boot/include/util.h
-@@ -0,0 +1,33 @@
-+/*
-+ * util.h - Convenience functions
-+ *
-+ * (C) Copyright 2006-2007 Openmoko, Inc.
-+ * Author: Werner Almesberger <werner@openmoko.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef UTIL_H
-+#define UTIL_H
-+
-+#include "nand.h"
-+
-+
-+/* common/cmd_nand.c */
-+int arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off,
-+  ulong *size);
-+
-+#endif /* UTIL_H */
-Index: u-boot/common/cmd_dynenv.c
-===================================================================
---- u-boot.orig/common/cmd_dynenv.c
-+++ u-boot/common/cmd_dynenv.c
-@@ -23,6 +23,7 @@
- #include <malloc.h>
- #include <environment.h>
- #include <nand.h>
-+#include <util.h>
- #include <asm/errno.h>
- 
- #if defined(CFG_ENV_OFFSET_OOB)
-@@ -39,8 +40,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag
- 	if (!buf)
- 		return -ENOMEM;
- 
-+	ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf);
- 	if (!strcmp(cmd, "get")) {
--		ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf);
- 
- 		if (buf[0] == 'E' && buf[1] == 'N' &&
- 		    buf[2] == 'V' && buf[3] == '0')
-@@ -49,7 +50,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag
- 			printf("No dynamic environment marker in OOB block 0\n");
- 
- 	} else if (!strcmp(cmd, "set")) {
--		unsigned long addr;
-+		unsigned long addr, dummy;
-+
- 		if (argc < 3)
- 			goto usage;
- 
-@@ -57,7 +59,23 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag
- 		buf[1] = 'N';
- 		buf[2] = 'V';
- 		buf[3] = '0';
--		addr = simple_strtoul(argv[2], NULL, 16);
-+
-+		if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy) < 0) {
-+			printf("Offset or partition name expected\n");
-+			goto fail;
-+		}
-+		if (!ret) {
-+			uint8_t tmp[4];
-+			int i;
-+
-+			memcpy(&tmp, &addr, 4);
-+			for (i = 0; i != 4; i++)
-+				if (tmp[i] & ~buf[i+4]) {
-+					printf("ERROR: erase OOB block to "
-+					  "write this value\n");
-+					goto fail;
-+				}
-+		}
- 		memcpy(buf+4, &addr, 4);
- 
- 		printf("%02x %02x %02x %02x - %02x %02x %02x %02x\n",
-@@ -65,6 +83,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag
- 			buf[4], buf[5], buf[6], buf[7]);
- 
- 		ret = mtd->write_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf);
-+		if (!ret)
-+			CFG_ENV_OFFSET = addr;
- 	} else
- 		goto usage;
- 
-@@ -72,8 +92,9 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag
- 	return ret;
- 
- usage:
--	free(buf);
- 	printf("Usage:\n%s\n", cmdtp->usage);
-+fail:
-+	free(buf);
- 	return 1;
- }
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/early-powerdown.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/early-powerdown.patch
deleted file mode 100644
index 7326c2daa6..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/early-powerdown.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-Index: u-boot/board/neo1973/neo1973.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/gta01.c
-+++ u-boot/board/neo1973/gta01/gta01.c
-@@ -68,8 +68,12 @@ DECLARE_GLOBAL_DATA_PTR;
- #define U_M_PDIV	0x2
- #define U_M_SDIV	0x3
- 
-+#define VALID_WAKEUP_REASONS (PCF50606_INT1_ONKEYF | PCF50606_INT1_ALARM)
-+
- unsigned int neo1973_wakeup_cause;
- extern int nobootdelay;
-+static unsigned char int1;
-+
- 
- static inline void delay (unsigned long loops)
- {
-@@ -179,6 +183,13 @@ int board_init (void)
- #error Please define GTA01 version
- #endif
- 
-+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
-+	int1 = pcf50606_reg_read(PCF50606_REG_INT1);
-+	if (!(int1 & VALID_WAKEUP_REASONS) && !neo1973_aux_key_pressed()) {
-+		pcf50606_reg_write(PCF50606_REG_OOCC1, PCF50606_OOCC1_GOSTDBY);
-+		while (1);
-+	}
-+
- 	/* arch number of SMDK2410-Board */
- 	gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA01;
- 
-@@ -200,7 +211,7 @@ int board_late_init(void)
- 	pcf50606_init();
- 
- 	/* obtain wake-up reason, save INT1 in environment */
--	tmp = pcf50606_reg_read(PCF50606_REG_INT1);
-+	tmp = int1; //pcf50606_reg_read(PCF50606_REG_INT1);
- 	sprintf(buf, "0x%02x", tmp);
- 	setenv("pcf50606_int1", buf);
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/enable-splash-bmp.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/enable-splash-bmp.patch
deleted file mode 100644
index dcb721c8d3..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/enable-splash-bmp.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-drivers/cfb_console.c: include asm/byteorder.h for le32_to_cpu and friends
-  [ shouldn't someone else have found this long ago ? ]
-include/configs/neo1973.h (CONFIG_COMMANDS): add CFG_CMD_BMP
-include/configs/neo1973.h: enable splash screen and BMP support
-include/configs/neo1973.h: remove #if 1 ... #endif around video definitions
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/drivers/cfb_console.c
-===================================================================
---- u-boot.orig/drivers/cfb_console.c
-+++ u-boot/drivers/cfb_console.c
-@@ -191,6 +191,7 @@ CONFIG_VIDEO_HW_CURSOR:	     - Uses the 
- #if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
- #include <watchdog.h>
- #include <bmp_layout.h>
-+#include <asm/byteorder.h>
- #endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
- 
- /*****************************************************************************/
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -86,6 +86,7 @@
- 			/* CFG_CMD_IRQ	 | */  \
- 			CFG_CMD_BOOTD	 | \
- 			CFG_CMD_CONSOLE	 | \
-+			CFG_CMD_BMP	 | \
- 			CFG_CMD_ASKENV	 | \
- 			CFG_CMD_RUN	 | \
- 			CFG_CMD_ECHO	 | \
-@@ -244,19 +245,21 @@
- /* we have a board_late_init() function */
- #define BOARD_LATE_INIT			1
- 
--#if 1
- #define CONFIG_VIDEO
- #define CONFIG_VIDEO_S3C2410
- #define CONFIG_CFB_CONSOLE
- #define CONFIG_VIDEO_LOGO
-+#define CONFIG_SPLASH_SCREEN
-+#define CFG_VIDEO_LOGO_MAX_SIZE	(640*480+1024+100) /* 100 = slack */
-+#define CONFIG_VIDEO_BMP_GZIP
- #define CONFIG_VGA_AS_SINGLE_DEVICE
-+#define CONFIG_UNZIP
- 
- #define VIDEO_KBD_INIT_FCT	0
- #define VIDEO_TSTC_FCT		serial_tstc
- #define VIDEO_GETC_FCT		serial_getc
- 
- #define LCD_VIDEO_ADDR		0x33d00000
--#endif
- 
- #define CONFIG_S3C2410_NAND_BBT                1
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/env_nand_oob.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/env_nand_oob.patch
deleted file mode 100644
index d3334d0335..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/env_nand_oob.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-This patch adds support for CFG_ENV_OFFSET_PATCHED and 
-CFG_ENV_OFFSET_OOB.
-
-Both try to solve the problem of fixing the environment location in NAND flash
-at compile time, which doesn't work well if the NAND flash has a bad block at
-exactly that location.
-
-CFG_ENV_OFFSET_PATCHED puts the environment in a global variable.  You can then
-use the linker script to put that variable to a fixed location in the u-boot
-image.  Then you can use bianry patching during the production flash process.
-
-The idea of CFG_ENV_OFFSET_OOB is to store the environment offset in the NAND
-OOB data of block 0.  We can do this in case the vendor makes a guarantee that
-block 0 never is a factory-default bad block. 
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/common/env_nand.c
-===================================================================
---- u-boot.orig/common/env_nand.c
-+++ u-boot/common/env_nand.c
-@@ -271,6 +271,33 @@
- 	ulong total;
- 	int ret;
- 
-+#if defined(CFG_ENV_OFFSET_OOB)
-+	struct mtd_info *mtd = &nand_info[0];
-+	struct nand_chip *this = mtd->priv;
-+	int buf_len;
-+	uint8_t *buf;
-+
-+	buf_len = (1 << this->bbt_erase_shift);
-+	buf_len += (buf_len >> this->page_shift) * mtd->oobsize;
-+	buf = malloc(buf_len);
-+	if (!buf)
-+		return;
-+
-+	nand_read_raw(mtd, buf, 0, mtd->oobblock, mtd->oobsize);
-+	if (buf[mtd->oobblock + 8 + 0] == 'E' &&
-+	    buf[mtd->oobblock + 8 + 1] == 'N' &&
-+	    buf[mtd->oobblock + 8 + 2] == 'V' &&
-+	    buf[mtd->oobblock + 8 + 3] == '0') {
-+		CFG_ENV_OFFSET = *((unsigned long *) &buf[mtd->oobblock + 8 + 4]);
-+		/* fall through to the normal environment reading code below */
-+		free(buf);
-+		puts("Found Environment offset in OOB..\n");
-+	} else {
-+		free(buf);
-+		return use_default();
-+	}
-+#endif
-+
- 	total = CFG_ENV_SIZE;
- 	ret = nand_read(&nand_info[0], CFG_ENV_OFFSET, &total, (u_char*)env_ptr);
-   	if (ret || total != CFG_ENV_SIZE)
-Index: u-boot/common/environment.c
-===================================================================
---- u-boot.orig/common/environment.c
-+++ u-boot/common/environment.c
-@@ -29,6 +29,12 @@
- #undef	__ASSEMBLY__
- #include <environment.h>
- 
-+#if defined(CFG_ENV_OFFSET_PATCHED)
-+unsigned long env_offset = CFG_ENV_OFFSET_PATCHED;
-+#elif defined(CFG_ENV_OFFSET_OOB)
-+unsigned long env_offset = CFG_ENV_OFFSET_OOB;
-+#endif
-+
- /*
-  * Handle HOSTS that have prepended
-  * crap on symbol names, not TARGETS.
-Index: u-boot/include/environment.h
-===================================================================
---- u-boot.orig/include/environment.h
-+++ u-boot/include/environment.h
-@@ -70,6 +70,10 @@
- #endif	/* CFG_ENV_IS_IN_FLASH */
- 
- #if defined(CFG_ENV_IS_IN_NAND)
-+#if defined(CFG_ENV_OFFSET_PATCHED) || defined(CFG_ENV_OFFSET_OOB)
-+extern unsigned long env_offset;
-+#define CFG_ENV_OFFSET env_offset
-+#else
- # ifndef CFG_ENV_OFFSET
- #  error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND"
- # endif
-@@ -82,6 +86,7 @@
- # ifdef CFG_ENV_IS_EMBEDDED
- #  define ENV_IS_EMBEDDED	1
- # endif
-+#endif /* CFG_ENV_NAND_PATCHED */
- #endif /* CFG_ENV_IS_IN_NAND */
- 
- 
-Index: u-boot/common/Makefile
-===================================================================
---- u-boot.orig/common/Makefile
-+++ u-boot/common/Makefile
-@@ -31,7 +31,7 @@
- 	  cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \
- 	  cmd_cache.o cmd_console.o \
- 	  cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \
--	  cmd_eeprom.o cmd_elf.o cmd_ext2.o \
-+	  cmd_dynenv.o cmd_eeprom.o cmd_elf.o cmd_ext2.o \
- 	  cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \
- 	  cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \
- 	  cmd_load.o cmd_log.o \
-Index: u-boot/common/cmd_dynenv.c
-===================================================================
---- /dev/null
-+++ u-boot/common/cmd_dynenv.c
-@@ -0,0 +1,85 @@
-+/*
-+ * (C) Copyright 2006-2007 Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <command.h>
-+#include <malloc.h>
-+#include <environment.h>
-+#include <nand.h>
-+#include <asm/errno.h>
-+
-+#if defined(CFG_ENV_OFFSET_OOB)
-+
-+int do_dynenv(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	struct mtd_info *mtd = &nand_info[0];
-+	int ret, size = 8;
-+	uint8_t *buf;
-+
-+	char *cmd = argv[1];
-+
-+	buf = malloc(mtd->oobsize);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+	if (!strcmp(cmd, "get")) {
-+		ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf);
-+
-+		if (buf[0] == 'E' && buf[1] == 'N' &&
-+		    buf[2] == 'V' && buf[3] == '0')
-+			printf("0x%08x\n", *((u_int32_t *) &buf[4]));
-+		else
-+			printf("No dynamic environment marker in OOB block 0\n");
-+
-+	} else if (!strcmp(cmd, "set")) {
-+		unsigned long addr;
-+		if (argc < 3)
-+			goto usage;
-+
-+		buf[0] = 'E';
-+		buf[1] = 'N';
-+		buf[2] = 'V';
-+		buf[3] = '0';
-+		addr = simple_strtoul(argv[2], NULL, 16);
-+		memcpy(buf+4, &addr, 4);
-+
-+		printf("%02x %02x %02x %02x - %02x %02x %02x %02x\n",
-+			buf[0], buf[1], buf[2], buf[3],
-+			buf[4], buf[5], buf[6], buf[7]);
-+
-+		ret = mtd->write_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf);
-+	} else
-+		goto usage;
-+
-+	free(buf);
-+	return ret;
-+
-+usage:
-+	free(buf);
-+	printf("Usage:\n%s\n", cmdtp->usage);
-+	return 1;
-+}
-+
-+U_BOOT_CMD(dynenv, 3, 1, do_dynenv,
-+	"dynenv  - dynamically placed (NAND) environment\n",
-+	"dynenv set off	- set enviromnent offset\n"
-+	"dynenv get	- get environment offset\n");
-+
-+#endif /* CFG_ENV_OFFSET_OOB */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/ext2load_hex.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/ext2load_hex.patch
deleted file mode 100644
index ff8e9cd6fc..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/ext2load_hex.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-This patch adds the hex-printing of the file size read by 'ext2load'
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot.git/common/cmd_ext2.c
-===================================================================
---- u-boot.git.orig/common/cmd_ext2.c	2007-01-02 18:26:17.000000000 +0100
-+++ u-boot.git/common/cmd_ext2.c	2007-01-02 18:26:27.000000000 +0100
-@@ -279,7 +279,7 @@
- 	/* Loading ok, update default load address */
- 	load_addr = addr;
- 
--	printf ("\n%ld bytes read\n", filelen);
-+	printf ("\n%ld (0x%lx) bytes read\n", filelen, filelen);
- 	sprintf(buf, "%lX", filelen);
- 	setenv("filesize", buf);
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/lowlevel_foo.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/lowlevel_foo.patch
deleted file mode 100644
index 715c46ed81..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/lowlevel_foo.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-board/neo1973/lowlevel_foo.S: http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.S
-board/neo1973/lowlevel_foo.lds: http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.lds
-board/neo1973/Makefile: added building of lowlevel_foo.bin (based on
-  http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.build.sh)
-
-Index: u-boot/board/neo1973/common/lowlevel_foo.S
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/lowlevel_foo.S
-@@ -0,0 +1,82 @@
-+
-+_start:
-+	b 	reset
-+undefvec:
-+	b	undefvec
-+swivec:
-+	b	swivec
-+pabtvec:
-+	b	pabtvec
-+dabtvec:
-+	b	dabtvec
-+rsvdvec:
-+	b	rsvdvec
-+irqvec:
-+	b	irqvec
-+fiqvec:
-+	b	fiqvec
-+
-+reset:
-+	/*
-+	 * set the cpu to SVC32 mode
-+	 */
-+	mrs	r0,cpsr
-+	bic	r0,r0,#0x1f
-+	orr	r0,r0,#0xd3
-+	msr	cpsr,r0
-+
-+/* turn off the watchdog */
-+#define pWTCON		0x53000000
-+#define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
-+#define INTSUBMSK	0x4A00001C
-+#define CLKDIVN	0x4C000014	/* clock divisor register */
-+
-+	ldr     r0, =pWTCON
-+	mov     r1, #0x0
-+	str     r1, [r0]
-+
-+	mov	r1, #0xffffffff
-+	ldr	r0, =INTMSK
-+	str	r1, [r0]
-+	ldr	r1, =0x3ff
-+	ldr	r0, =INTSUBMSK
-+	str	r1, [r0]
-+
-+	/* FCLK:HCLK:PCLK = 1:2:4 */
-+	/* default FCLK is 120 MHz ! */
-+	ldr	r0, =CLKDIVN
-+	mov	r1, #3
-+	str	r1, [r0]
-+
-+	bl	cpu_init_crit
-+	ldr	r0,=TEXT_BASE
-+	mov	pc, r0
-+
-+cpu_init_crit:
-+	/*
-+	 * flush v4 I/D caches
-+	 */
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-+
-+	/*
-+	 * disable MMU stuff and caches
-+	 */
-+	mrc	p15, 0, r0, c1, c0, 0
-+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-+	mcr	p15, 0, r0, c1, c0, 0
-+
-+	/*
-+	 * before relocating, we have to setup RAM timing
-+	 * because memory timing is board-dependend, you will
-+	 * find a lowlevel_init.S in your board directory.
-+	 */
-+	mov	ip, lr
-+	bl	lowlevel_init
-+	mov	lr, ip
-+	mov	pc, lr
-+
-Index: u-boot/board/neo1973/common/lowlevel_foo.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/lowlevel_foo.lds
-@@ -0,0 +1,56 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  lowlevel_foo.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/board/neo1973/gta01/Makefile
-===================================================================
---- u-boot.orig/board/neo1973/gta01/Makefile
-+++ u-boot/board/neo1973/gta01/Makefile
-@@ -28,14 +28,31 @@
- OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o
- SOBJS	:= ../common/lowlevel_init.o
- 
-+.PHONY:	all
-+
-+all:	$(LIB) lowevel_foo.bin
-+
- $(LIB):	$(OBJS) $(SOBJS)
- 	$(AR) crv $@ $(OBJS) $(SOBJS)
- 
-+lowlevel_foo.o:	../common/lowlevel_foo.S
-+	$(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \
-+	  -o lowlevel_foo.o ../common/lowlevel_foo.S
-+
-+lowlevel_foo:	lowlevel_foo.o ../common/lowlevel_init.o ../common/lowlevel_foo.lds
-+	$(LD) -T ../common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \
-+	  ../common/lowlevel_init.o lowlevel_foo.o -o lowlevel_foo
-+
-+lowevel_foo.bin:	lowlevel_foo
-+	$(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \
-+	  lowlevel_foo lowlevel_foo.bin
-+
-+
- clean:
--	rm -f $(SOBJS) $(OBJS)
-+	rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o
- 
- distclean:	clean
--	rm -f $(LIB) core *.bak .depend
-+	rm -f $(LIB) core *.bak .depend lowlevel_foo.bin
- 
- #########################################################################
- 
-Index: u-boot/board/qt2410/Makefile
-===================================================================
---- u-boot.orig/board/qt2410/Makefile
-+++ u-boot/board/qt2410/Makefile
-@@ -28,14 +28,31 @@
- OBJS	:= qt2410.o flash.o
- SOBJS	:= lowlevel_init.o
- 
-+.PHONY:	all
-+
-+all:	$(LIB) lowevel_foo.bin
-+
- $(LIB):	$(OBJS) $(SOBJS)
- 	$(AR) crv $@ $(OBJS) $(SOBJS)
- 
-+lowlevel_foo.o:	../neo1973/common/lowlevel_foo.S
-+	$(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \
-+	  -o lowlevel_foo.o ../neo1973/common/lowlevel_foo.S
-+
-+lowlevel_foo:	lowlevel_foo.o lowlevel_init.o \
-+		../neo1973/common/lowlevel_foo.lds
-+	$(LD) -T ../neo1973/common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \
-+          lowlevel_init.o lowlevel_foo.o -o lowlevel_foo
-+
-+lowevel_foo.bin:	lowlevel_foo
-+	$(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \
-+	  lowlevel_foo lowlevel_foo.bin
-+
- clean:
--	rm -f $(SOBJS) $(OBJS)
-+	rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o
- 
- distclean:	clean
--	rm -f $(LIB) core *.bak .depend
-+	rm -f $(LIB) core *.bak .depend lowlevel_foo.bin
- 
- #########################################################################
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/mmcinit-power-up.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/mmcinit-power-up.patch
deleted file mode 100644
index fcf54b9fd1..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/mmcinit-power-up.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-board/neo1973/neo1973.c (board_late_init): moved MMC power-up to separate
-  function
-cpu/arm920t/s3c24x0/mmc.c (mmc_init): call mmc_power_up and return -ENODEV
-  immediately if there is no card
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/board/neo1973/neo1973.c
-===================================================================
---- u-boot.orig/board/neo1973/neo1973.c
-+++ u-boot/board/neo1973/neo1973.c
-@@ -223,6 +223,19 @@ int board_init (void)
- 	return 0;
- }
- 
-+int mmc_power_up(void)
-+{
-+#if defined(CONFIG_ARCH_GTA01B_v4)
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	/* check if sd card is inserted, and power-up if it is */
-+	if (gpio->GPFDAT & (1 << 5))
-+		return 0;
-+	gpio->GPBDAT &= ~(1 << 2);
-+#endif /* !CONFIG_ARCH_GTA01B_v4 */
-+	return 1;
-+}
-+
- int board_late_init(void)
- {
- 	unsigned char tmp;
-@@ -289,14 +302,8 @@ continue_boot:
- 	/* switch on the backlight */
- 	neo1973_backlight(1);
- 
--#if defined(CONFIG_ARCH_GTA01B_v4)
--	{
--		/* check if sd card is inserted, and power-up if it is */
--		S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
--		if (!(gpio->GPFDAT & (1 << 5)))
--			gpio->GPBDAT &= ~(1 << 2);
--	}
--#endif
-+	/* check if sd card is inserted, and power-up if it is */
-+	mmc_power_up();
- 
- 	return 0;
- }
-Index: u-boot/cpu/arm920t/s3c24x0/mmc.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/mmc.c
-+++ u-boot/cpu/arm920t/s3c24x0/mmc.c
-@@ -381,6 +381,11 @@ static void print_sd_cid(const struct sd
- 	    cid->crc >> 1, cid->crc & 1);
- }
- 
-+int __attribute__((weak)) mmc_power_up(void)
-+{
-+	return 1;
-+}
-+
- int mmc_init(int verbose)
- {
-  	int retries, rc = -ENODEV;
-@@ -393,6 +398,8 @@ int mmc_init(int verbose)
- 	debug("mmc_init(PCLK=%u)\n", get_PCLK());
- 
- 	clk_power->CLKCON |= (1 << 9);
-+	if (!mmc_power_up())
-+		return -ENODEV;
- 
- 	/* S3C2410 has some bug that prevents reliable operation at higher speed */
- 	//sdi->SDIPRE = 0x3e;  /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-badisbad.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-badisbad.patch
deleted file mode 100644
index a5800e2499..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-badisbad.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-This patch makes nand_block_checkbad check both the BBT and the actual
-OOB data. This avoids accidently passing blocks as good when BBT and
-OOB markers are not synchronized, e.g., before "nand createbbt".
-
-Experimental.
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/drivers/nand/nand_base.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_base.c
-+++ u-boot/drivers/nand/nand_base.c
-@@ -517,11 +517,14 @@ static int nand_block_checkbad (struct m
- {
- 	struct nand_chip *this = mtd->priv;
- 
--	if (!this->bbt)
--		return this->block_bad(mtd, ofs, getchip);
-+	if (this->block_bad(mtd, ofs, getchip))
-+		return 1;
- 
- 	/* Return info from the table */
--	return nand_isbad_bbt (mtd, ofs, allowbbt);
-+	if (this->bbt && nand_isbad_bbt (mtd, ofs, allowbbt))
-+		return 1;
-+
-+	return 0;
- }
- 
- /**
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-createbbt.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-createbbt.patch
deleted file mode 100644
index 74b79da0a9..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-createbbt.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-This patch adds user-requested BBT creation. It includes the following changes:
-
-- common/cmd_nand.c: move yes/no decision to separate function
-- do_nand: ask for confirmation for "nand erase"
-- do_nand: add command "nand createbbt" to erase NAND and create a new BBT
-
-Experimental.
-
-- Werner Almesberger <werner@openmoko.org>
-
-
-Index: u-boot/common/cmd_nand.c
-===================================================================
---- u-boot.orig/common/cmd_nand.c	2007-02-16 23:53:28.000000000 +0100
-+++ u-boot/common/cmd_nand.c	2007-02-16 23:53:57.000000000 +0100
-@@ -163,6 +163,17 @@
- 	return 0;
- }
- 
-+static int yes(void)
-+{
-+	char c;
-+
-+	c = getc();
-+	if (c != 'y' && c != 'Y')
-+		return 0;
-+	c = getc();
-+	return c == '\r' || c == '\n';
-+}
-+
- int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
- {
- 	int i, dev, ret;
-@@ -228,7 +239,8 @@
- 	    strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
- 	    strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
- 	    strcmp(cmd, "biterr") != 0 &&
--	    strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 )
-+	    strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 &&
-+	    strcmp(cmd, "createbbt") != 0 )
- 		goto usage;
- 
- 	/* the following commands operate on the current device */
-@@ -283,13 +295,23 @@
- 			     "are sure of what you are doing!\n"
- 			     "\nReally scrub this NAND flash? <y/N>\n");
- 
--			if (getc() == 'y' && getc() == '\r') {
-+			if (yes()) {
- 				opts.scrub = 1;
- 			} else {
- 				puts("scrub aborted\n");
- 				return -1;
- 			}
- 		}
-+		else {
-+			if (opts.length == nand->size) {
-+				puts("Really erase everything ? <y/N>\n");
-+				if (!yes()) {
-+					puts("erase aborted\n");
-+					return -1;
-+				}
-+			}
-+		}
-+
- 		ret = nand_erase_opts(nand, &opts);
- 		printf("%s\n", ret ? "ERROR" : "OK");
- 
-@@ -458,6 +480,33 @@
- 		return 0;
- 	}
- 
-+	if (strcmp(cmd, "createbbt") == 0) {
-+		struct nand_chip *nand_chip = nand->priv;
-+		nand_erase_options_t opts;
-+
-+		puts("Create BBT and erase everything ? <y/N>\n");
-+		if (!yes()) {
-+			puts("createbbt aborted\n");
-+			return -1;
-+		}
-+		memset(&opts, 0, sizeof(opts));
-+		opts.length = nand->size;
-+		if (nand_erase_opts(nand, &opts)) {
-+			puts("Erase failed\n");
-+			return 1;
-+		}
-+		nand_chip->options &= ~NAND_DONT_CREATE_BBT;
-+		puts("Creating BBT. Please wait ...");
-+		if (nand_default_bbt(nand)) {
-+			puts("\nFailed\n");
-+			return 1;
-+		}
-+		else {
-+			puts("\n");
-+			return 0;
-+		}
-+	}
-+
- usage:
- 	printf("Usage:\n%s\n", cmdtp->usage);
- 	return 1;
-@@ -478,7 +527,8 @@
- 	"nand markbad off - mark bad block at offset (UNSAFE)\n"
- 	"nand biterr off - make a bit error at offset (UNSAFE)\n"
- 	"nand lock [tight] [status] - bring nand to lock state or display locked pages\n"
--	"nand unlock [offset] [size] - unlock section\n");
-+	"nand unlock [offset] [size] - unlock section\n"
-+	"nand createbbt - create bad block table\n");
- 
- static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
- 			   ulong offset, ulong addr, char *cmd)
-Index: u-boot/drivers/nand/nand_bbt.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_bbt.c	2007-02-16 23:53:54.000000000 +0100
-+++ u-boot/drivers/nand/nand_bbt.c	2007-02-16 23:53:57.000000000 +0100
-@@ -795,7 +795,8 @@
- 
- 	len = mtd->size >> (this->bbt_erase_shift + 2);
- 	/* Allocate memory (2bit per block) */
--	this->bbt = kmalloc (len, GFP_KERNEL);
-+	if (!this->bbt)
-+		this->bbt = kmalloc (len, GFP_KERNEL);
- 	if (!this->bbt) {
- 		printk (KERN_ERR "nand_scan_bbt: Out of memory\n");
- 		return -ENOMEM;
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-dynamic_partitions.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-dynamic_partitions.patch
deleted file mode 100644
index ecce004ca6..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-dynamic_partitions.patch
+++ /dev/null
@@ -1,354 +0,0 @@
-This patch adds support for 'dynamic partitions'.  This basically 
-works as follows:
-* The nand code generates a bad-block-table at the first scan of the chip
-* The dynamic partition code calculates the raw partition sizes based on 
-  the bad block table.  E.g. if you have a partition of size 0x30000, and there are 
-  two bad blocks (0x4000 each) in it, the raw size will increase to 0x38000, and the
-  following partitions get shifted towards the end of flash.
-
-Please note that currently the desired partition sizes are stored at compile-time
-in an array in drivers/nand/nand_bbt.c, so this definitely needs to change before
-submitting/merging upstream.
-
-In order to calculate the partiton map (and set mtdparts accordingly), you can use
-the 'dynpart' command at the prompt.  Use 'saveenv' to make the setting permanent.
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/drivers/nand/nand_bbt.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_bbt.c
-+++ u-boot/drivers/nand/nand_bbt.c
-@@ -1044,9 +1044,86 @@
- 	switch ((int)res) {
- 	case 0x00:	return 0;
- 	case 0x01:	return 1;
-+	case 0x03:	return 1;
- 	case 0x02:	return allowbbt ? 0 : 1;
- 	}
- 	return 1;
- }
- 
-+#if defined(CONFIG_NAND_DYNPART)
-+
-+extern unsigned int dynpart_size[];
-+extern char *dynpart_names[];
-+
-+#define MTDPARTS_MAX_SIZE 512
-+
-+
-+static int skip_offs(const struct nand_chip *this, unsigned int offs)
-+{
-+	int block = (int) (offs >> (this->bbt_erase_shift - 1));
-+	u_int8_t bbt = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
-+
-+	return bbt == 3;
-+}
-+
-+int nand_create_mtd_dynpart(struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	int part;
-+	char *mtdparts;
-+	unsigned int cur_offs = 0;
-+
-+	mtdparts = malloc(MTDPARTS_MAX_SIZE); /* FIXME: bounds checking */
-+	if (!mtdparts)
-+		return -ENOMEM;
-+
-+	sprintf(mtdparts, "mtdparts=" CFG_NAND_DYNPART_MTD_KERNEL_NAME ":");
-+
-+	for (part = 0; dynpart_size[part] != 0; part++) {
-+		unsigned int bb_delta = 0;
-+		unsigned int offs = 0;
-+		char mtdpart[32];
-+
-+		for (offs = cur_offs;
-+		     offs < cur_offs + dynpart_size[part] + bb_delta;
-+		     offs += mtd->erasesize) {
-+			if (skip_offs(this, offs))
-+				bb_delta += mtd->erasesize;
-+		}
-+
-+		/*
-+		 * Absorb bad blocks immediately following this partition also
-+		 * into the partition, in order to make next partition start
-+		 * with a good block. This simplifies handling of the
-+		 * environment partition.
-+		 */
-+		while (offs < this->chipsize && skip_offs(this, offs)) {
-+			bb_delta += mtd->erasesize;
-+			offs += mtd->erasesize;
-+		}
-+
-+		if (cur_offs + dynpart_size[part] + bb_delta > this->chipsize)
-+			dynpart_size[part] = this->chipsize - cur_offs - bb_delta;
-+#if 0
-+		printf("partition %u: start = 0x%08x, end=%08x size=%08x, size_inc_bb=%08x\n",
-+			part, cur_offs, cur_offs + dynpart_size[part] + bb_delta,
-+			dynpart_size[part], dynpart_size[part] + bb_delta);
-+#endif
-+		cur_offs += dynpart_size[part] + bb_delta;
-+		sprintf(mtdpart, "0x%.8x(%.16s),", dynpart_size[part] + bb_delta,
-+			dynpart_names[part]);
-+		mtdpart[sizeof(mtdpart)-1] = '\0';
-+		strncat(mtdparts, mtdpart,
-+		    MTDPARTS_MAX_SIZE-strlen(mtdparts)-1);
-+	}
-+
-+	mtdparts[strlen(mtdparts)-1] = '\0';
-+	printf("mtdparts %s\n", mtdparts);
-+	setenv("mtdparts", mtdparts);
-+
-+	free(mtdparts);
-+	return 0;
-+}
-+#endif /* CONFIG_NAND_DYNPART */
-+
- #endif
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -99,7 +99,7 @@
- 			CFG_CMD_ELF	 | \
- 			CFG_CMD_MISC	 | \
- 			/* CFG_CMD_USB	 | */ \
--			/* CFG_CMD_JFFS2	 | */ \
-+			CFG_CMD_JFFS2	 | \
- 			CFG_CMD_DIAG	 | \
- 			/* CFG_CMD_HWFLOW	 | */ \
- 			CFG_CMD_SAVES	 | \
-@@ -212,13 +212,13 @@
- #define CONFIG_FAT		1
- #define CONFIG_SUPPORT_VFAT
- 
--#if 0
-+#if 1
- /* JFFS2 driver */
- #define CONFIG_JFFS2_CMDLINE	1
- #define CONFIG_JFFS2_NAND	1
- #define CONFIG_JFFS2_NAND_DEV	0
--#define CONFIG_JFFS2_NAND_OFF	0x634000
--#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
-+//#define CONFIG_JFFS2_NAND_OFF	0x634000
-+//#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
- #endif
- 
- /* ATAG configuration */
-@@ -257,4 +257,9 @@
- 
- #define CONFIG_DRIVER_PCF50606		1
- 
-+#define MTDIDS_DEFAULT	"nand0=neo1973-nand"
-+#define MTPARTS_DEFAULT	"neo1973-nand:256k(u-boot),16k(u-boot_env),2M(kernel),640k(splash),-(jffs2)"
-+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand"
-+#define CONFIG_NAND_DYNPART
-+
- #endif	/* __CONFIG_H */
-Index: u-boot/common/cmd_jffs2.c
-===================================================================
---- u-boot.orig/common/cmd_jffs2.c
-+++ u-boot/common/cmd_jffs2.c
-@@ -1841,6 +1841,29 @@
- 	return NULL;
- }
- 
-+/* Return the 'net size' of the partition (i.e. excluding any bad blocks) */
-+unsigned int nand_net_part_size(struct part_info *part)
-+{
-+	struct mtd_info *mtd;
-+	unsigned int offs;
-+	unsigned int bb_delta = 0;
-+
-+	if (!part || !part->dev || !part->dev->id ||
-+	    part->dev->id->num >= CFG_MAX_NAND_DEVICE)
-+		return 0;
-+
-+ 	mtd = &nand_info[part->dev->id->num];
-+
-+	for (offs = part->offset; offs < part->offset + part->size;
-+	     offs += mtd->erasesize) {
-+		if (nand_isbad_bbt(mtd, offs, 0))
-+			bb_delta += mtd->erasesize;
-+	}
-+
-+	return part->size - bb_delta;
-+}
-+
-+
- /***************************************************/
- /* U-boot commands				   */
- /***************************************************/
-@@ -2132,6 +2155,24 @@
- 	printf ("Usage:\n%s\n", cmdtp->usage);
- 	return 1;
- }
-+
-+#if defined(CONFIG_NAND_DYNPART)
-+extern int nand_create_mtd_dynpart(struct mtd_info *mtd);
-+
-+int do_dynpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+#if 0
-+	int i = simple_strtoul(argv[1], NULL, 0);
-+	if (i >= CFG_MAX_NAND_DEVICE)
-+		return -EINVAL;
-+#endif
-+	nand_create_mtd_dynpart(&nand_info[0]);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_NAND_DYNPART */
-+
-+
- #endif /* #ifdef CONFIG_JFFS2_CMDLINE */
- 
- /***************************************************/
-@@ -2197,6 +2238,15 @@
- 	"<name>     := '(' NAME ')'\n"
- 	"<ro-flag>  := when set to 'ro' makes partition read-only (not used, passed to kernel)\n"
- );
-+
-+#if defined(CONFIG_NAND_DYNPART)
-+U_BOOT_CMD(
-+	dynpart, 1,	1,	do_dynpart,
-+	"dynpart\t- dynamically calculate partition table based on BBT\n",
-+	"\n"
-+	"    - sets 'mtdparts' according to BBT\n");
-+#endif /* CONFIG_NAND_DYNPART */
-+
- #endif /* #ifdef CONFIG_JFFS2_CMDLINE */
- 
- /***************************************************/
-Index: u-boot/common/cmd_nand.c
-===================================================================
---- u-boot.orig/common/cmd_nand.c
-+++ u-boot/common/cmd_nand.c
-@@ -101,7 +101,7 @@
- }
- 
- int
--arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size)
-+arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size, int net)
- {
- 	int idx = nand_curr_device;
- #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
-@@ -122,10 +122,17 @@
- 					printf("'%s' is not a number\n", argv[1]);
- 					return -1;
- 				}
--				if (*size > part->size)
--					*size = part->size;
-+				if (*size > part->size) {
-+					if (net)
-+						*size = nand_net_part_size(part);
-+					else
-+						*size = part->size;
-+				}
- 			} else {
--				*size = part->size;
-+				if (net)
-+					*size = nand_net_part_size(part);
-+				else
-+					*size = part->size;
- 			}
- 			idx = dev->id->num;
- 			*nand = nand_info[idx];
-@@ -261,7 +268,7 @@
- 
- 		printf("\nNAND %s: ", scrub ? "scrub" : "erase");
- 		/* skip first two or three arguments, look for offset and size */
--		if (arg_off_size(argc - o, argv + o, nand, &off, &size) != 0)
-+		if (arg_off_size(argc - o, argv + o, nand, &off, &size, 0) != 0)
- 			return 1;
- 
- 		memset(&opts, 0, sizeof(opts));
-@@ -323,7 +330,7 @@
- 
- 		read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
- 		printf("\nNAND %s: ", read ? "read" : "write");
--		if (arg_off_size(argc - 3, argv + 3, nand, &off, &size) != 0)
-+		if (arg_off_size(argc - 3, argv + 3, nand, &off, &size, 1) != 0)
- 			return 1;
- 
- 		s = strchr(cmd, '.');
-@@ -445,7 +452,7 @@
- 	}
- 
- 	if (strcmp(cmd, "unlock") == 0) {
--		if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
-+		if (arg_off_size(argc - 2, argv + 2, nand, &off, &size, 0) < 0)
- 			return 1;
- 
- 		if (!nand_unlock(nand, off, size)) {
-Index: u-boot/common/cmd_dynenv.c
-===================================================================
---- u-boot.orig/common/cmd_dynenv.c
-+++ u-boot/common/cmd_dynenv.c
-@@ -60,7 +60,7 @@
- 		buf[2] = 'V';
- 		buf[3] = '0';
- 
--		if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy) < 0) {
-+		if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy, 1) < 0) {
- 			printf("Offset or partition name expected\n");
- 			goto fail;
- 		}
-Index: u-boot/include/util.h
-===================================================================
---- u-boot.orig/include/util.h
-+++ u-boot/include/util.h
-@@ -28,6 +28,6 @@
- 
- /* common/cmd_nand.c */
- int arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off,
--  ulong *size);
-+  ulong *size, int net);
- 
- #endif /* UTIL_H */
-Index: u-boot/board/qt2410/qt2410.c
-===================================================================
---- u-boot.orig/board/qt2410/qt2410.c
-+++ u-boot/board/qt2410/qt2410.c
-@@ -126,3 +126,9 @@
- 
- 	return 0;
- }
-+
-+unsigned int dynpart_size[] = {
-+    CFG_UBOOT_SIZE, 0x4000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 };
-+char *dynpart_names[] = {
-+    "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL };
-+
-Index: u-boot/board/neo1973/gta01/gta01.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/gta01.c
-+++ u-boot/board/neo1973/gta01/gta01.c
-@@ -429,3 +434,14 @@
- 	return 0;
- }
- 
-+
-+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000.
-+   "initrd" is sized such that it can hold two uncompressed 16 bit 640*480
-+   images: 640*480*2*2 = 1228800 < 1245184. */
-+
-+unsigned int dynpart_size[] = {
-+    CFG_UBOOT_SIZE, 0x4000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 };
-+char *dynpart_names[] = {
-+    "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL };
-+
-+
-Index: u-boot/include/configs/qt2410.h
-===================================================================
---- u-boot.orig/include/configs/qt2410.h
-+++ u-boot/include/configs/qt2410.h
-@@ -283,5 +283,7 @@
- 
- #define MTDIDS_DEFAULT		"nand0=qt2410-nand"
- #define MTPARTS_DEFAULT		"qt2410-nand:192k(u-boot),8k(u-boot_env),2M(kernel),2M(splash),-(jffs2)"
-+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "qt2410-nand"
-+#define CONFIG_NAND_DYNPART
- 
- #endif	/* __CONFIG_H */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-otp.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-otp.patch
deleted file mode 100644
index 1f49544282..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-otp.patch
+++ /dev/null
@@ -1,302 +0,0 @@
-Index: u-boot/common/cmd_nand.c
-===================================================================
---- u-boot.orig/common/cmd_nand.c
-+++ u-boot/common/cmd_nand.c
-@@ -392,6 +392,14 @@
- 			else
- 				ret = nand->write_oob(nand, off, size, &size, 
- 						      (u_char *) addr);
-+		} else if (s != NULL && !strcmp(s, ".otp")) {
-+			/* read out-of-band data */
-+			if (read)
-+				ret = nand->read_otp(nand, off, size, &size,
-+						     (u_char *) addr);
-+			else
-+				ret = nand->write_otp(nand, off, size, &size,
-+						      (u_char *) addr);
- 		} else {
- 			if (read)
- 				ret = nand_read(nand, off, &size, (u_char *)addr);
-@@ -527,8 +535,9 @@
- 	"nand    - NAND sub-system\n",
- 	"info                  - show available NAND devices\n"
- 	"nand device [dev]     - show or set current device\n"
--	"nand read[.jffs2]     - addr off|partition size\n"
--	"nand write[.jffs2]    - addr off|partiton size - read/write `size' bytes starting\n"
-+	"nand read[.jffs2, .oob, .otp] addr off|partition size\n"
-+	"nand write[.jffs2, .oob, .otp] addr off|partiton size\n"
-+	"  - read/write `size' bytes starting\n"
- 	"    at offset `off' to/from memory address `addr'\n"
- 	"nand erase [clean] [off size] - erase `size' bytes from\n"
- 	"    offset `off' (entire device if not specified)\n"
-Index: u-boot/cpu/arm920t/s3c24x0/nand.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c
-+++ u-boot/cpu/arm920t/s3c24x0/nand.c
-@@ -205,7 +205,7 @@
- }
- #endif
- 
--int board_nand_init(struct nand_chip *nand)
-+int s3c24x0_nand_init(struct nand_chip *nand)
- {
- 	u_int32_t cfg;
- 	u_int8_t tacls, twrph0, twrph1;
-Index: u-boot/drivers/nand/nand_base.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_base.c
-+++ u-boot/drivers/nand/nand_base.c
-@@ -2042,6 +2042,32 @@
- }
- #endif
- 
-+/*
-+ * See nand_read_oob and nand_write_oob
-+ */
-+
-+static int nand_read_otp(struct mtd_info *mtd, loff_t from, size_t len,
-+    size_t *retlen, u_char *buf)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (!this->read_otp)
-+		return -ENOSYS;
-+	return this->read_otp(mtd, from, len, retlen, buf);
-+
-+}
-+
-+static int nand_write_otp(struct mtd_info *mtd, loff_t to, size_t len,
-+    size_t *retlen, const u_char *buf)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (!this->write_otp)
-+		return -ENOSYS;
-+	return this->write_otp(mtd, to, len, retlen, buf);
-+}
-+
-+
- /**
-  * single_erease_cmd - [GENERIC] NAND standard block erase command function
-  * @mtd:	MTD device structure
-@@ -2613,6 +2639,8 @@
- 	mtd->write_ecc = nand_write_ecc;
- 	mtd->read_oob = nand_read_oob;
- 	mtd->write_oob = nand_write_oob;
-+	mtd->read_otp = nand_read_otp;
-+	mtd->write_otp = nand_write_otp;
- /* XXX U-BOOT XXX */
- #if 0
- 	mtd->readv = NULL;
-Index: u-boot/include/linux/mtd/mtd.h
-===================================================================
---- u-boot.orig/include/linux/mtd/mtd.h
-+++ u-boot/include/linux/mtd/mtd.h
-@@ -95,6 +95,9 @@
- 	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
- 	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
- 
-+	int (*read_otp) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-+	int (*write_otp) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
-+
- 	/*
- 	 * Methods to access the protection register area, present in some
- 	 * flash devices. The user data is one time programmable but the
-Index: u-boot/include/linux/mtd/nand.h
-===================================================================
---- u-boot.orig/include/linux/mtd/nand.h
-+++ u-boot/include/linux/mtd/nand.h
-@@ -307,6 +307,10 @@
- 	void		(*enable_hwecc)(struct mtd_info *mtd, int mode);
- 	void		(*erase_cmd)(struct mtd_info *mtd, int page);
- 	int		(*scan_bbt)(struct mtd_info *mtd);
-+	int		(*read_otp)(struct mtd_info *mtd, loff_t from,
-+			    size_t len, size_t *retlen, u_char *buf);
-+        int		(*write_otp) (struct mtd_info *mtd, loff_t to,
-+			    size_t len, size_t *retlen, const u_char *buf);
- 	int		eccmode;
- 	int		eccsize;
- 	int		eccbytes;
-Index: u-boot/board/neo1973/gta01/Makefile
-===================================================================
---- u-boot.orig/board/neo1973/gta01/Makefile
-+++ u-boot/board/neo1973/gta01/Makefile
-@@ -25,7 +25,7 @@
- 
- LIB	= lib$(BOARD).a
- 
--OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o
-+OBJS	:= gta01.o pcf50606.o nand.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o
- SOBJS	:= ../common/lowlevel_init.o
- 
- .PHONY:	all
-Index: u-boot/board/neo1973/gta01/nand.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/nand.c
-@@ -0,0 +1,121 @@
-+/*
-+ * nand.c - Board-specific NAND setup
-+ *
-+ * Copyright (C) 2007 by Openmoko, Inc.
-+ * Written by Werner Almesberger <werner@openmoko.org>
-+ * All Rights Reserved
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include "config.h" /* nand.h needs NAND_MAX_CHIPS */
-+#include "linux/mtd/mtd.h"
-+#include "linux/mtd/nand.h"
-+#include "asm/errno.h"
-+
-+
-+int s3c24x0_nand_init(struct nand_chip *nand);
-+
-+
-+static void samsung_nand_begin_otp(struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	/* @@@FIXME: this is ugly - we select the NAND chip to send the
-+	   mode switch commands, knowing that it will be switched off later */
-+	this->select_chip(mtd, 0);
-+	/* "magic" mode change */
-+	this->cmdfunc(mtd, 0x30, -1, -1);
-+	this->cmdfunc(mtd, 0x65, -1, -1);
-+}
-+
-+
-+static void samsung_nand_end_otp(struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	/* read/write deselected the chip so now we need to select again */
-+	this->select_chip(mtd, 0);
-+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+	this->select_chip(mtd, -1);
-+}
-+
-+
-+static loff_t otp_page[] = {
-+	0x15,	/* 00-XX-00-00, with XX = 15h-19h */
-+	0x16,
-+	0x17,
-+	0x18,
-+	0x19,
-+	0x1b,	/* 00-1B-00-00 */
-+};
-+
-+#define OTP_PAGES (sizeof(otp_page)/sizeof(*otp_page))
-+
-+
-+static int convert_otp_address(loff_t *addr, size_t *len)
-+{
-+	int page;
-+
-+	if (*len && *addr >> 9 != (*addr+*len-1) >> 9)
-+		return -EINVAL;
-+	if (*len > 512)
-+		return -EINVAL;
-+	page = *addr >> 9;
-+	if (page >= OTP_PAGES)
-+		return -EINVAL;
-+	*addr = otp_page[page] << 9;
-+	return 0;
-+}
-+
-+
-+static int samsung_nand_read_otp(struct mtd_info *mtd, loff_t from,
-+    size_t len, size_t *retlen, u_char *buf)
-+{
-+	int ret;
-+
-+	ret = convert_otp_address(&from, &len);
-+	if (ret)
-+		return ret;
-+	samsung_nand_begin_otp(mtd);
-+	ret = mtd->read(mtd, from, len, retlen, buf);
-+	samsung_nand_end_otp(mtd);
-+	return ret;
-+}
-+
-+
-+static int samsung_nand_write_otp(struct mtd_info *mtd, loff_t to,
-+    size_t len, size_t *retlen, const u_char *buf)
-+{
-+	int ret;
-+
-+	ret = convert_otp_address(&to, &len);
-+	if (ret)
-+		return ret;
-+	samsung_nand_begin_otp(mtd);
-+	ret = mtd->write(mtd, to, len, retlen, buf);
-+	samsung_nand_end_otp(mtd);
-+	return ret;
-+}
-+
-+
-+int board_nand_init(struct nand_chip *nand)
-+{
-+	nand->read_otp = samsung_nand_read_otp;
-+	nand->write_otp = samsung_nand_write_otp;
-+	return s3c24x0_nand_init(nand);
-+}
-Index: u-boot/board/neo1973/gta02/nand.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta02/nand.c
-@@ -0,0 +1,39 @@
-+/*
-+ * nand.c - Board-specific NAND setup
-+ *
-+ * Copyright (C) 2007 by Openmoko, Inc.
-+ * Written by Werner Almesberger <werner@openmoko.org>
-+ * All Rights Reserved
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include "config.h" /* nand.h needs NAND_MAX_CHIPS */
-+#include "linux/mtd/mtd.h"
-+#include "linux/mtd/nand.h"
-+
-+
-+int s3c24x0_nand_init(struct nand_chip *nand);
-+
-+
-+/* Add OTP et al later */
-+
-+
-+int board_nand_init(struct nand_chip *nand)
-+{
-+	return s3c24x0_nand_init(nand);
-+}
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-read_write_oob.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-read_write_oob.patch
deleted file mode 100644
index 8360409e46..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/nand-read_write_oob.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-Re-introduce the 'nand read.oob' and 'nand write.oob' commands
-that used to exist with the legacy NAND code
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-Index: u-boot.git/common/cmd_nand.c
-===================================================================
---- u-boot.git.orig/common/cmd_nand.c	2007-01-26 15:41:13.000000000 +0100
-+++ u-boot.git/common/cmd_nand.c	2007-01-26 15:49:37.000000000 +0100
-@@ -351,6 +351,14 @@
- 				opts.quiet      = quiet;
- 				ret = nand_write_opts(nand, &opts);
- 			}
-+		} else if (s != NULL && !strcmp(s, ".oob")) {
-+			/* read out-of-band data */
-+			if (read)
-+				ret = nand->read_oob(nand, off, size, &size,
-+						     (u_char *) addr);
-+			else
-+				ret = nand->write_oob(nand, off, size, &size, 
-+						      (u_char *) addr);
- 		} else {
- 			if (read)
- 				ret = nand_read(nand, off, &size, (u_char *)addr);
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/neo1973-chargefast.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/neo1973-chargefast.patch
deleted file mode 100644
index 6f6af2c758..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/neo1973-chargefast.patch
+++ /dev/null
@@ -1,316 +0,0 @@
-Index: u-boot/drivers/usbtty.c
-===================================================================
---- u-boot.orig/drivers/usbtty.c
-+++ u-boot/drivers/usbtty.c
-@@ -66,7 +66,7 @@
- /*
-  * Defines
-  */
--#define NUM_CONFIGS    1
-+#define NUM_CONFIGS    2
- #define MAX_INTERFACES 2
- #define NUM_ENDPOINTS  3
- #define ACM_TX_ENDPOINT 3
-@@ -192,8 +192,7 @@
- #endif
-     			.bConfigurationValue = 1,
- 			.iConfiguration = STR_CONFIG,
--			.bmAttributes = 
--				BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
-+			.bmAttributes = BMATTRIBUTE_RESERVED,
- 			.bMaxPower = USBTTY_MAXPOWER
- 		},
- 		/* Interface 1 */
-@@ -294,6 +293,120 @@
- 		.func_dfu = DFU_FUNC_DESC,
- #endif
- 	},
-+	{
-+		.configuration_desc ={
-+			.bLength = 
-+				sizeof(struct usb_configuration_descriptor),
-+    			.bDescriptorType = USB_DT_CONFIG,
-+			.wTotalLength =	 
-+				cpu_to_le16(sizeof(struct acm_config_desc)
-+#ifdef CONFIG_USBD_DFU
-+					    - sizeof(struct usb_interface_descriptor)
-+					    - sizeof(struct usb_dfu_func_descriptor)
-+#endif
-+					   ),
-+	    		.bNumInterfaces = NUM_ACM_INTERFACES,
-+    			.bConfigurationValue = 2,
-+			.iConfiguration = STR_CONFIG,
-+			.bmAttributes = BMATTRIBUTE_RESERVED,
-+			.bMaxPower = 50, /* 100mA */
-+		},
-+		/* Interface 1 */
-+		.interface_desc = {
-+			.bLength  = sizeof(struct usb_interface_descriptor),
-+			.bDescriptorType = USB_DT_INTERFACE,
-+			.bInterfaceNumber = 0,
-+			.bAlternateSetting = 0,
-+			.bNumEndpoints = 0x01,
-+			.bInterfaceClass = 
-+				COMMUNICATIONS_INTERFACE_CLASS_CONTROL,
-+			.bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS,
-+			.bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL,
-+			.iInterface = STR_CTRL_INTERFACE,
-+		},
-+		.usb_class_header = {
-+			.bFunctionLength	= 
-+				sizeof(struct usb_class_header_function_descriptor),
-+			.bDescriptorType	= CS_INTERFACE,	
-+			.bDescriptorSubtype	= USB_ST_HEADER,
-+			.bcdCDC	= cpu_to_le16(110),
-+		},
-+		.usb_class_call_mgt = {
-+			.bFunctionLength	= 
-+				sizeof(struct usb_class_call_management_descriptor),
-+			.bDescriptorType	= CS_INTERFACE,
-+			.bDescriptorSubtype	= USB_ST_CMF,
-+			.bmCapabilities		= 0x00,	
-+			.bDataInterface		= 0x01,	
-+		},
-+		.usb_class_acm = {
-+			.bFunctionLength	= 
-+				sizeof(struct usb_class_abstract_control_descriptor),
-+			.bDescriptorType	= CS_INTERFACE,
-+			.bDescriptorSubtype	= USB_ST_ACMF,	
-+			.bmCapabilities		= 0x00,	
-+		},
-+		.usb_class_union = {
-+			.bFunctionLength	= 	
-+				sizeof(struct usb_class_union_function_descriptor),
-+			.bDescriptorType	= CS_INTERFACE,
-+			.bDescriptorSubtype	= USB_ST_UF,
-+			.bMasterInterface	= 0x00,	
-+			.bSlaveInterface0	= 0x01,	
-+		},
-+		.notification_endpoint = {
-+			.bLength =		
-+				sizeof(struct usb_endpoint_descriptor),
-+			.bDescriptorType	= USB_DT_ENDPOINT,
-+			.bEndpointAddress	= 0x01 | USB_DIR_IN,
-+			.bmAttributes		= USB_ENDPOINT_XFER_INT,
-+			.wMaxPacketSize		
-+				= cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
-+			.bInterval		= 0xFF,
-+		},
-+
-+		/* Interface 2 */
-+		.data_class_interface = {
-+			.bLength		= 
-+				sizeof(struct usb_interface_descriptor),
-+			.bDescriptorType	= USB_DT_INTERFACE,
-+			.bInterfaceNumber	= 0x01,
-+			.bAlternateSetting	= 0x00,
-+			.bNumEndpoints		= 0x02,
-+			.bInterfaceClass	= 
-+				COMMUNICATIONS_INTERFACE_CLASS_DATA,
-+			.bInterfaceSubClass	= DATA_INTERFACE_SUBCLASS_NONE,
-+			.bInterfaceProtocol	= DATA_INTERFACE_PROTOCOL_NONE,
-+			.iInterface		= STR_DATA_INTERFACE,
-+		},
-+		.data_endpoints = {
-+			{
-+				.bLength		= 
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType	= USB_DT_ENDPOINT,
-+				.bEndpointAddress	= 0x02 | USB_DIR_OUT,
-+				.bmAttributes		= 
-+					USB_ENDPOINT_XFER_BULK,
-+				.wMaxPacketSize		= 
-+					cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
-+				.bInterval		= 0xFF,
-+			},
-+			{
-+				.bLength		= 
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType	= USB_DT_ENDPOINT,
-+				.bEndpointAddress	= 0x03 | USB_DIR_IN,
-+				.bmAttributes		= 
-+					USB_ENDPOINT_XFER_BULK,
-+				.wMaxPacketSize		= 
-+					cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
-+				.bInterval		= 0xFF,
-+			},
-+		},
-+		/* We don't add the DFU functional descriptor here since we only
-+		 * want to do DFU in the high-current charging mode for safety reasons */
-+	},
-+
- };	
- 
- static struct rs232_emu rs232_desc={
-@@ -330,8 +443,7 @@
- 			.bNumInterfaces = NUM_GSERIAL_INTERFACES,
- 			.bConfigurationValue = 1,
- 			.iConfiguration = STR_CONFIG,
--			.bmAttributes = 
--				BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
-+			.bmAttributes = BMATTRIBUTE_RESERVED,
- 			.bMaxPower = USBTTY_MAXPOWER
- 		},
- 		.interface_desc = {
-@@ -384,6 +496,68 @@
- 			},
- 		},
- 	},
-+	{
-+		.configuration_desc ={
-+			.bLength = sizeof(struct usb_configuration_descriptor),
-+			.bDescriptorType = USB_DT_CONFIG,
-+			.wTotalLength =	 
-+				cpu_to_le16(sizeof(struct gserial_config_desc)),
-+			.bNumInterfaces = NUM_GSERIAL_INTERFACES,
-+			.bConfigurationValue = 1,
-+			.iConfiguration = STR_CONFIG,
-+			.bmAttributes = BMATTRIBUTE_RESERVED,
-+			.bMaxPower = 50
-+		},
-+		.interface_desc = {
-+			{
-+				.bLength  = 
-+					sizeof(struct usb_interface_descriptor),
-+				.bDescriptorType = USB_DT_INTERFACE,
-+				.bInterfaceNumber = 0,
-+				.bAlternateSetting = 0,
-+				.bNumEndpoints = NUM_ENDPOINTS,
-+				.bInterfaceClass = 
-+					COMMUNICATIONS_INTERFACE_CLASS_VENDOR,
-+				.bInterfaceSubClass = 
-+					COMMUNICATIONS_NO_SUBCLASS,
-+				.bInterfaceProtocol = 
-+					COMMUNICATIONS_NO_PROTOCOL,
-+				.iInterface = STR_DATA_INTERFACE
-+			},
-+  		},
-+		.data_endpoints  = {
-+			{
-+				.bLength =		
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType =	USB_DT_ENDPOINT,
-+				.bEndpointAddress =	0x01 | USB_DIR_OUT,
-+				.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-+				.wMaxPacketSize =	
-+					cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE),
-+				.bInterval=		0xFF,
-+			},
-+			{
-+				.bLength =		
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType =	USB_DT_ENDPOINT,
-+				.bEndpointAddress =	0x02 | USB_DIR_IN,
-+				.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-+				.wMaxPacketSize = 	
-+					cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
-+				.bInterval = 		0xFF,
-+			},
-+			{
-+				.bLength = 		
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType =	USB_DT_ENDPOINT,
-+				.bEndpointAddress =	0x03 | USB_DIR_IN,
-+				.bmAttributes =		USB_ENDPOINT_XFER_INT,
-+    				.wMaxPacketSize =	
-+					cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
-+				.bInterval =		0xFF,
-+			},
-+		},
-+	},
- };
- 
- /*
-@@ -679,12 +853,14 @@
- 	bus_instance->maxpacketsize = 64;
- 	bus_instance->serial_number_str = serial_number;
- 
--	/* configuration instance */
--	memset (config_instance, 0,
--		sizeof (struct usb_configuration_instance));
--	config_instance->interfaces = interface_count;
--	config_instance->configuration_descriptor = configuration_descriptor;
--	config_instance->interface_instance_array = interface_instance;
-+	/* configuration instances */
-+	for (i = 0; i < NUM_CONFIGS; i++) {
-+		memset(&config_instance[i], 0, sizeof(config_instance));
-+		config_instance[i].interfaces = interface_count;
-+		/* FIXME: this breaks for the non-ACM case */
-+		config_instance[i].configuration_descriptor = &acm_configuration_descriptors[i];
-+		config_instance[i].interface_instance_array = interface_instance;
-+	}
- 
- 	/* interface instance */
- 	memset (interface_instance, 0,
-@@ -1043,9 +1219,17 @@
- 		usbtty_configured_flag = 0;
- 		break;
- 	case DEVICE_CONFIGURED:
-+		printf("DEVICE_CONFIGURED: %u\n", device->configuration);
-+		if (device->configuration == 1)
-+			udc_ctrl(UDC_CTRL_500mA_ENABLE, 1);
-+		else
-+			udc_ctrl(UDC_CTRL_500mA_ENABLE, 0);
- 		usbtty_configured_flag = 1;
- 		break;
--
-+	case DEVICE_DE_CONFIGURED:
-+		printf("DEVICE_DE_CONFIGURED\n");
-+		udc_ctrl(UDC_CTRL_500mA_ENABLE, 0);
-+		break;
- 	case DEVICE_ADDRESS_ASSIGNED:
- 		usbtty_init_endpoints ();
- 
-Index: u-boot/drivers/usbtty.h
-===================================================================
---- u-boot.orig/drivers/usbtty.h
-+++ u-boot/drivers/usbtty.h
-@@ -60,7 +60,7 @@
- #define USBTTY_DEVICE_CLASS	COMMUNICATIONS_DEVICE_CLASS
- 
- #define USBTTY_BCD_DEVICE	0x00
--#define USBTTY_MAXPOWER  	0x00
-+#define USBTTY_MAXPOWER  	250	/* 500mA */
- 
- #define STR_LANG		0x00
- #define STR_MANUFACTURER	0x01
-Index: u-boot/board/neo1973/common/udc.c
-===================================================================
---- u-boot.orig/board/neo1973/common/udc.c
-+++ u-boot/board/neo1973/common/udc.c
-@@ -2,6 +2,7 @@
- #include <common.h>
- #include <usbdcore.h>
- #include <s3c2410.h>
-+#include <pcf50606.h>
- 
- void udc_ctrl(enum usbd_event event, int param)
- {
-@@ -17,6 +18,13 @@
- 			gpio->GPBDAT &= ~(1 << 9);
- #endif
- 		break;
-+	case UDC_CTRL_500mA_ENABLE:
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) || \
-+    defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-+    defined(CONFIG_ARCH_GTA01B_v4)
-+		pcf50606_charge_autofast(param);
-+#endif
-+		break;
- 	default:
- 		break;
- 	}
-Index: u-boot/include/usbdcore.h
-===================================================================
---- u-boot.orig/include/usbdcore.h
-+++ u-boot/include/usbdcore.h
-@@ -686,8 +686,8 @@
- 
- enum usbd_event {
- 	UDC_CTRL_PULLUP_ENABLE,
-+	UDC_CTRL_500mA_ENABLE,
- };
- 
- void udc_ctrl(enum usbd_event event, int param);
- #endif
--#endif
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/preboot-override.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/preboot-override.patch
deleted file mode 100644
index f32cbde27b..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/preboot-override.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-Provide a place where the loader can patch the binary, such that it executes a
-command string from RAM. We use this for automated installs, where we can thus
-use the same u-boot binary for all stages.
-
-include/configs/neo1973.h: new option CFG_PREBOOT_OVERRIDE to allow setting of
-  the preboot command in memory
-cpu/arm920t/start.S: added variable "preboot_override" at known location
-  (_start+0x40)
-common/main.c (main_loop): if preboot_override is set, execute the command
-  string found there
-common/env_common.c (env_relocate):  if preboot_override is set, always use the
-  default environment
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -77,6 +77,14 @@ _fiq:			.word fiq
-  *************************************************************************
-  */
- 
-+
-+/* Must follow the .balign above, so we get a well-known address ! */
-+#ifdef CFG_PREBOOT_OVERRIDE
-+.globl	preboot_override
-+preboot_override:
-+	.word	0
-+#endif
-+
- #ifdef CONFIG_S3C2410_NAND_BOOT
- .globl	booted_from_nand
- booted_from_nand:
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -207,6 +207,7 @@
- #define	CFG_ENV_IS_IN_NAND	1
- #define CFG_ENV_SIZE		0x4000		/* 16k Total Size of Environment Sector */
- #define CFG_ENV_OFFSET_OOB    1               /* Location of ENV stored in block 0 OOB */
-+#define	CFG_PREBOOT_OVERRIDE	1	/* allow preboot from memory */
- 
- #define NAND_MAX_CHIPS		1
- #define CFG_NAND_BASE		0x4e000000
-Index: u-boot/common/main.c
-===================================================================
---- u-boot.orig/common/main.c
-+++ u-boot/common/main.c
-@@ -85,6 +85,11 @@ int do_mdm_init = 0;
- extern void mdm_init(void); /* defined in board.c */
- #endif
- 
-+#ifdef CFG_PREBOOT_OVERRIDE
-+extern char *preboot_override;
-+#endif
-+
-+
- /***************************************************************************
-  * Watch for 'delay' seconds for autoboot stop or autoboot delay string.
-  * returns: 0 -  no key string, allow autoboot
-@@ -306,8 +311,8 @@ void main_loop (void)
- 	char *s;
- 	int bootdelay;
- #endif
--#ifdef CONFIG_PREBOOT
--	char *p;
-+#if defined(CONFIG_PREBOOT) || defined(CFG_PREBOOT_OVERRIDE)
-+	char *p = NULL;
- #endif
- #ifdef CONFIG_BOOTCOUNT_LIMIT
- 	unsigned long bootcount = 0;
-@@ -364,8 +369,23 @@ void main_loop (void)
- 	install_auto_complete();
- #endif
- 
-+#if defined(CONFIG_PREBOOT) || defined(CFG_PREBOOT_OVERRIDE)
- #ifdef CONFIG_PREBOOT
--	if ((p = getenv ("preboot")) != NULL) {
-+	p = getenv ("preboot");
-+#endif
-+#ifdef CFG_PREBOOT_OVERRIDE
-+	if (preboot_override) {
-+		/* for convenience, preboot_override may end in \n, not \0 */
-+		p = strchr(preboot_override, '\n');
-+		if (p)
-+			*p = 0;
-+		/* make sure we can overwrite the load area if we want to */
-+		p = strdup(preboot_override);
-+		/* clean the image in case we want to flash it */
-+		preboot_override = NULL;
-+	}
-+#endif /* CFG_PREBOOT_OVERRIDE */
-+	if (p) {
- # ifdef CONFIG_AUTOBOOT_KEYED
- 		int prev = disable_ctrlc(1);	/* disable Control C checking */
- # endif
-@@ -381,7 +401,7 @@ void main_loop (void)
- 		disable_ctrlc(prev);	/* restore Control C checking */
- # endif
- 	}
--#endif /* CONFIG_PREBOOT */
-+#endif /* CONFIG_PREBOOT || CFG_PREBOOT_OVERRIDE */
- 
- #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
- 	s = getenv ("bootdelay");
-Index: u-boot/common/env_common.c
-===================================================================
---- u-boot.orig/common/env_common.c
-+++ u-boot/common/env_common.c
-@@ -37,6 +37,10 @@
- # define SHOW_BOOT_PROGRESS(arg)
- #endif
- 
-+#ifdef CFG_PREBOOT_OVERRIDE
-+extern char *preboot_override;
-+#endif
-+
- DECLARE_GLOBAL_DATA_PTR;
- 
- #ifdef CONFIG_AMIGAONEG3SE
-@@ -234,7 +238,14 @@ void env_relocate (void)
- 		puts ("*** Warning - bad CRC, using default environment\n\n");
- 		SHOW_BOOT_PROGRESS (-1);
- #endif
-+	}
-+
-+#ifdef CFG_PREBOOT_OVERRIDE
-+	if (preboot_override)
-+		gd->env_valid = 0;
-+#endif
- 
-+	if (gd->env_valid == 0) {
- 		if (sizeof(default_environment) > ENV_SIZE)
- 		{
- 			puts ("*** Error - default environment is too large\n\n");
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/raise-limits.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/raise-limits.patch
deleted file mode 100644
index a1c381a2cf..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/raise-limits.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-include/configs/neo1973.h: increase heap from 128 kB to 400 kB, for BMP image
-  decompression
-  [ note: increasing it to 512 kB trips over something. note sure what.
-    find out. ]
-include/configs/neo1973.h: raise number of command line arguments from 16 to 64
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -54,7 +54,8 @@
- /*
-  * Size of malloc() pool
-  */
--#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 400*1024)
-+					/* >> CFG_VIDEO_LOGO_MAX_SIZE */
- #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
- 
- /*
-@@ -142,7 +143,7 @@
- #endif
- #define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
- #define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
--#define	CFG_MAXARGS		16		/* max number of command args	*/
-+#define	CFG_MAXARGS		64		/* max number of command args	*/
- #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
- 
- #define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/series b/recipes/u-boot/u-boot-mkimage-openmoko-native/series
deleted file mode 100644
index 4fc7d1342f..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/series
+++ /dev/null
@@ -1,76 +0,0 @@
-# just some local hacks
-uboot-machtypes.patch
-ext2load_hex.patch
-uboot-mokoversion.patch
-
-# those we want to get mainline
-uboot-s3c2410-warnings-fix.patch
-uboot-strtoul.patch
-uboot-cramfs_but_no_jffs2.patch
-nand-read_write_oob.patch
-uboot-arm920t-gd_in_irq.patch
-uboot-arm920_s3c2410_irq_demux.patch
-uboot-s3c2410-nand.patch
-uboot-cmd_s3c2410.patch
-uboot-s3c2410-mmc.patch
-env_nand_oob.patch
-dynenv-harden.patch
-uboot-s3c2410_fb.patch
-uboot-20061030-qt2410.patch 
-uboot-20061030-neo1973.patch 
-
-# under construction, but intended for mainline
-uboot-s3c2410-misccr-definitions.patch
-
-boot-from-ram-reloc.patch
-boot-from-ram-and-nand.patch
-wakeup-reason-nand-only.patch
-uboot-neo1973-resume.patch
-
-# this will be somewhat more difficult
-nand-dynamic_partitions.patch
-uboot-s3c2410-norelocate_irqvec_cpy.patch
-uboot-usbtty-acm.patch
-uboot-s3c2410_udc.patch
-
-# those need to be cleaned up
-bbt-create-optional.patch
-nand-createbbt.patch
-dontask.patch
-nand-badisbad.patch
-uboot-bbt-quiet.patch
-
-# splash screen
-raise-limits.patch
-splashimage-command.patch
-cmd-unzip.patch
-enable-splash-bmp.patch
-
-# for automated installation
-preboot-override.patch
-lowlevel_foo.patch
-
-# move these later, once the dust has settled
-default-env.patch
-console-ansi.patch
-boot-menu.patch
-
-# those have to be implemented fully
-uboot-dfu.patch
-uboot-neo1973-defaultenv.patch
-uboot-nand-markbad-reallybad.patch
-usbdcore-multiple_configs.patch
-neo1973-chargefast.patch
-
-uboot-s3c2440.patch
-uboot-smdk2440.patch
-uboot-hxd8.patch
-
-uboot-license.patch
-
-uboot-gta02.patch
-uboot-s3c2443.patch
-uboot-smdk2443.patch
-
-# for review, merge soon
-unbusy-i2c.patch 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/splashimage-command.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/splashimage-command.patch
deleted file mode 100644
index 8ea48cf484..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/splashimage-command.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-drivers/cfb_console.c (video_logo): if "splashimage" doesn't contain an
-  address, use its content as a command
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/drivers/cfb_console.c
-===================================================================
---- u-boot.orig/drivers/cfb_console.c
-+++ u-boot/drivers/cfb_console.c
-@@ -1121,7 +1121,13 @@ static void *video_logo (void)
- 	ulong addr;
- 
- 	if ((s = getenv ("splashimage")) != NULL) {
--		addr = simple_strtoul (s, NULL, 16);
-+		char *end;
-+
-+		addr = simple_strtoul (s, &end, 16);
-+		if (*end) {
-+			run_command(s, 0);
-+			return video_fb_address;
-+		}
- 
- 		if (video_display_bitmap (addr, 0, 0) == 0) {
- 			return ((void *) (video_fb_address));
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch
deleted file mode 100644
index 3daa3bc1e8..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch
+++ /dev/null
@@ -1,2248 +0,0 @@
-This patch adds neo1973 'board' (FIC Neo1973 phone) support to u-boot.
-Specifically, it adds support for the GTA01v3, GTA01v4, GTA01Bv2 and
-GTA01Bv3 hardware revisions.
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/Makefile
-===================================================================
---- u-boot.orig/Makefile
-+++ u-boot/Makefile
-@@ -2009,6 +2009,14 @@
- sbc2410x_config: unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
- 
-+gta01_config \
-+gta01v3_config \
-+gta01bv2_config \
-+gta01bv3_config \
-+gta01bv4_config \
-+gta01v4_config :	unconfig
-+	@sh board/neo1973/gta01/split_by_variant.sh $@
-+
- qt2410_config	:	unconfig
- 	@./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
- 
-Index: u-boot/common/main.c
-===================================================================
---- u-boot.orig/common/main.c
-+++ u-boot/common/main.c
-@@ -61,6 +61,7 @@
- #undef DEBUG_PARSER
- 
- char        console_buffer[CFG_CBSIZE];		/* console I/O buffer	*/
-+int nobootdelay;
- 
- #ifndef CONFIG_CMDLINE_EDITING
- static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
-@@ -376,7 +377,7 @@
- 
- 	debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
- 
--	if (bootdelay >= 0 && s && !abortboot (bootdelay)) {
-+	if (!nobootdelay && bootdelay >= 0 && s && !abortboot (bootdelay)) {
- # ifdef CONFIG_AUTOBOOT_KEYED
- 		int prev = disable_ctrlc(1);	/* disable Control C checking */
- # endif
-Index: u-boot/drivers/Makefile
-===================================================================
---- u-boot.orig/drivers/Makefile
-+++ u-boot/drivers/Makefile
-@@ -50,6 +50,7 @@
- 	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
- 	  videomodes.o w83c553f.o \
- 	  ks8695eth.o \
-+	  pcf50606.o \
- 	  pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o	\
- 	  rpx_pcmcia.o \
- 	  fsl_i2c.o s3c2410_fb.o
-Index: u-boot/drivers/pcf50606.c
-===================================================================
---- /dev/null
-+++ u-boot/drivers/pcf50606.c
-@@ -0,0 +1,112 @@
-+
-+#include <common.h>
-+
-+#ifdef CONFIG_DRIVER_PCF50606
-+
-+#include <i2c.h>
-+#include <pcf50606.h>
-+#include <asm/atomic.h>
-+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-+
-+#define PCF50606_I2C_ADDR		0x08
-+
-+void __pcf50606_reg_write(u_int8_t reg, u_int8_t val)
-+{
-+	i2c_write(PCF50606_I2C_ADDR, reg, 1, &val, 1);
-+}
-+
-+u_int8_t __pcf50606_reg_read(u_int8_t reg)
-+{
-+	u_int8_t tmp;
-+	i2c_read(PCF50606_I2C_ADDR, reg, 1, &tmp, 1);
-+	return tmp;
-+}
-+
-+void pcf50606_reg_write(u_int8_t reg, u_int8_t val)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	__pcf50606_reg_write(reg, val);
-+	local_irq_restore(flags);
-+}
-+
-+u_int8_t pcf50606_reg_read(u_int8_t reg)
-+{
-+	unsigned long flags;
-+	u_int8_t tmp;
-+
-+	local_irq_save(flags);
-+	tmp = __pcf50606_reg_read(reg);
-+	local_irq_restore(flags);
-+
-+	return tmp;
-+}
-+
-+void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val)
-+{
-+	unsigned long flags;
-+	u_int8_t tmp;
-+
-+	local_irq_save(flags);
-+	tmp = __pcf50606_reg_read(reg);
-+	__pcf50606_reg_write(reg, (val & mask) | (tmp & ~mask));
-+	local_irq_restore(flags);
-+}
-+
-+void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits)
-+{
-+	unsigned long flags;
-+	u_int8_t tmp;
-+
-+	local_irq_save(flags);
-+	tmp = pcf50606_reg_read(reg);
-+	pcf50606_reg_write(reg, (tmp & ~bits));
-+	local_irq_restore(flags);
-+}
-+
-+static const u_int8_t regs_valid[] = {
-+	PCF50606_REG_OOCS, PCF50606_REG_INT1M, PCF50606_REG_INT2M,
-+	PCF50606_REG_INT3M, PCF50606_REG_OOCC1, PCF50606_REG_OOCC2,
-+	PCF50606_REG_PSSC, PCF50606_REG_PWROKM, PCF50606_REG_DCDC1,
-+	PCF50606_REG_DCDC2, PCF50606_REG_DCDC3, PCF50606_REG_DCDC4,
-+	PCF50606_REG_DCDEC1, PCF50606_REG_DCDEC2, PCF50606_REG_DCUDC1,
-+	PCF50606_REG_DCUDC2, PCF50606_REG_IOREGC, PCF50606_REG_D1REGC1,
-+	PCF50606_REG_D2REGC1, PCF50606_REG_D3REGC1, PCF50606_REG_LPREGC1,
-+	PCF50606_REG_LPREGC2, PCF50606_REG_MBCC1, PCF50606_REG_MBCC2,
-+	PCF50606_REG_MBCC3, PCF50606_REG_BBCC, PCF50606_REG_ADCC1,
-+	PCF50606_REG_ADCC2, PCF50606_REG_ACDC1, PCF50606_REG_BVMC,
-+	PCF50606_REG_PWMC1, PCF50606_REG_LEDC1, PCF50606_REG_LEDC2,
-+	PCF50606_REG_GPOC1, PCF50606_REG_GPOC2, PCF50606_REG_GPOC3,
-+	PCF50606_REG_GPOC4, PCF50606_REG_GPOC5,
-+};
-+
-+
-+/* initialize PCF50606 register set */
-+void pcf50606_init(void)
-+{
-+	unsigned long flags;
-+	int i;
-+
-+	local_irq_save(flags);
-+	for (i = 0; i < ARRAY_SIZE(regs_valid); i++) {
-+		__pcf50606_reg_write(regs_valid[i],
-+				     pcf50606_initial_regs[regs_valid[i]]);
-+	}
-+	local_irq_restore(flags);
-+}
-+
-+void pcf50606_charge_autofast(int on)
-+{
-+	if (on) {
-+		printf("Enabling automatic fast charge\n");
-+		pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+					  PCF50606_MBCC1_AUTOFST,
-+					  PCF50606_MBCC1_AUTOFST);
-+	} else {
-+		printf("Disabling fast charge\n");
-+		pcf50606_reg_write(PCF50606_REG_MBCC1, 0x00);
-+	}
-+}
-+
-+#endif /* CONFIG DRIVER_PCF50606 */
-Index: u-boot/include/pcf50606.h
-===================================================================
---- /dev/null
-+++ u-boot/include/pcf50606.h
-@@ -0,0 +1,273 @@
-+#ifndef _PCF50606_H
-+#define _PCF50606_H
-+
-+/* Philips PCF50606 Power Managemnt Unit (PMU) driver
-+ * (C) 2006-2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ */
-+
-+enum pfc50606_regs {
-+	PCF50606_REG_ID		= 0x00,
-+	PCF50606_REG_OOCS	= 0x01,
-+	PCF50606_REG_INT1	= 0x02,	/* Interrupt Status */
-+	PCF50606_REG_INT2	= 0x03,	/* Interrupt Status */
-+	PCF50606_REG_INT3	= 0x04,	/* Interrupt Status */
-+	PCF50606_REG_INT1M	= 0x05,	/* Interrupt Mask */
-+	PCF50606_REG_INT2M	= 0x06,	/* Interrupt Mask */
-+	PCF50606_REG_INT3M	= 0x07,	/* Interrupt Mask */
-+	PCF50606_REG_OOCC1	= 0x08,
-+	PCF50606_REG_OOCC2	= 0x09,
-+	PCF50606_REG_RTCSC	= 0x0a,	/* Second */
-+	PCF50606_REG_RTCMN	= 0x0b,	/* Minute */
-+	PCF50606_REG_RTCHR	= 0x0c,	/* Hour */
-+	PCF50606_REG_RTCWD	= 0x0d,	/* Weekday */
-+	PCF50606_REG_RTCDT	= 0x0e,	/* Day */
-+	PCF50606_REG_RTCMT	= 0x0f,	/* Month */
-+	PCF50606_REG_RTCYR	= 0x10,	/* Year */
-+	PCF50606_REG_RTCSCA	= 0x11, /* Alarm Second */
-+	PCF50606_REG_RTCMNA	= 0x12, /* Alarm Minute */
-+	PCF50606_REG_RTCHRA	= 0x13, /* Alarm Hour */
-+	PCF50606_REG_RTCWDA	= 0x14, /* Alarm Weekday */
-+	PCF50606_REG_RTCDTA	= 0x15, /* Alarm Day */
-+	PCF50606_REG_RTCMTA	= 0x16, /* Alarm Month */
-+	PCF50606_REG_RTCYRA	= 0x17, /* Alarm Year */
-+	PCF50606_REG_PSSC	= 0x18,	/* Power sequencing */
-+	PCF50606_REG_PWROKM	= 0x19,	/* PWROK mask */
-+	PCF50606_REG_PWROKS	= 0x1a,	/* PWROK status */
-+	PCF50606_REG_DCDC1	= 0x1b,
-+	PCF50606_REG_DCDC2	= 0x1c,
-+	PCF50606_REG_DCDC3	= 0x1d,
-+	PCF50606_REG_DCDC4	= 0x1e,
-+	PCF50606_REG_DCDEC1	= 0x1f,
-+	PCF50606_REG_DCDEC2	= 0x20,
-+	PCF50606_REG_DCUDC1	= 0x21,
-+	PCF50606_REG_DCUDC2	= 0x22,
-+	PCF50606_REG_IOREGC	= 0x23,
-+	PCF50606_REG_D1REGC1	= 0x24,
-+	PCF50606_REG_D2REGC1	= 0x25,
-+	PCF50606_REG_D3REGC1	= 0x26,
-+	PCF50606_REG_LPREGC1	= 0x27,
-+	PCF50606_REG_LPREGC2	= 0x28,
-+	PCF50606_REG_MBCC1	= 0x29,
-+	PCF50606_REG_MBCC2	= 0x2a,
-+	PCF50606_REG_MBCC3	= 0x2b,
-+	PCF50606_REG_MBCS1	= 0x2c,
-+	PCF50606_REG_BBCC	= 0x2d,
-+	PCF50606_REG_ADCC1	= 0x2e,
-+	PCF50606_REG_ADCC2	= 0x2f,
-+	PCF50606_REG_ADCS1	= 0x30,
-+	PCF50606_REG_ADCS2	= 0x31,
-+	PCF50606_REG_ADCS3	= 0x32,
-+	PCF50606_REG_ACDC1	= 0x33,
-+	PCF50606_REG_BVMC	= 0x34,
-+	PCF50606_REG_PWMC1	= 0x35,
-+	PCF50606_REG_LEDC1	= 0x36,
-+	PCF50606_REG_LEDC2	= 0x37,
-+	PCF50606_REG_GPOC1	= 0x38,
-+	PCF50606_REG_GPOC2	= 0x39,
-+	PCF50606_REG_GPOC3	= 0x3a,
-+	PCF50606_REG_GPOC4	= 0x3b,
-+	PCF50606_REG_GPOC5	= 0x3c,
-+	__NUM_PCF50606_REGS
-+};
-+
-+enum pcf50606_reg_oocs {
-+	PFC50606_OOCS_ONKEY	= 0x01,
-+	PCF50606_OOCS_EXTON	= 0x02,
-+	PCF50606_OOCS_PWROKRST	= 0x04,
-+	PCF50606_OOCS_BATOK	= 0x08,
-+	PCF50606_OOCS_BACKOK	= 0x10,
-+	PCF50606_OOCS_CHGOK	= 0x20,
-+	PCF50606_OOCS_TEMPOK	= 0x40,
-+	PCF50606_OOCS_WDTEXP	= 0x80,
-+};
-+
-+enum pcf50606_reg_oocc1 {
-+	PCF50606_OOCC1_GOSTDBY	= 0x01,
-+	PCF50606_OOCC1_TOTRST	= 0x02,
-+	PCF50606_OOCC1_CLK32ON	= 0x04,
-+	PCF50606_OOCC1_WDTRST	= 0x08,
-+	PCF50606_OOCC1_RTCWAK	= 0x10,
-+	PCF50606_OOCC1_CHGWAK	= 0x20,
-+	PCF50606_OOCC1_EXTONWAK_HIGH	= 0x40,
-+	PCF50606_OOCC1_EXTONWAK_LOW	= 0x80,
-+	PCF50606_OOCC1_EXTONWAK_NO_WAKEUP = 0x3f,
-+};
-+
-+enum pcf50606_reg_oocc2 {
-+	PCF50606_OOCC2_ONKEYDB_NONE	= 0x00,
-+	PCF50606_OOCC2_ONKEYDB_14ms	= 0x01,
-+	PCF50606_OOCC2_ONKEYDB_62ms	= 0x02,
-+	PCF50606_OOCC2_ONKEYDB_500ms	= 0x03,
-+	PCF50606_OOCC2_EXTONDB_NONE	= 0x00,
-+	PCF50606_OOCC2_EXTONDB_14ms	= 0x04,
-+	PCF50606_OOCC2_EXTONDB_62ms	= 0x08,
-+	PCF50606_OOCC2_EXTONDB_500ms	= 0x0c,
-+};
-+
-+enum pcf50606_reg_int1 {
-+	PCF50606_INT1_ONKEYR	= 0x01,	/* ONKEY rising edge */
-+	PCF50606_INT1_ONKEYF	= 0x02,	/* ONKEY falling edge */
-+	PCF50606_INT1_ONKEY1S	= 0x04,	/* OMKEY at least 1sec low */
-+	PCF50606_INT1_EXTONR	= 0x08,	/* EXTON rising edge */
-+	PCF50606_INT1_EXTONF	= 0x10,	/* EXTON falling edge */
-+	PCF50606_INT1_SECOND	= 0x40,	/* RTC periodic second interrupt */
-+	PCF50606_INT1_ALARM	= 0x80, /* RTC alarm time is reached */
-+};
-+
-+enum pcf50606_reg_int2 {
-+	PCF50606_INT2_CHGINS	= 0x01, /* Charger inserted */
-+	PCF50606_INT2_CHGRM	= 0x02, /* Charger removed */
-+	PCF50606_INT2_CHGFOK	= 0x04,	/* Fast charging OK */
-+	PCF50606_INT2_CHGERR	= 0x08,	/* Error in charging mode */
-+	PCF50606_INT2_CHGFRDY	= 0x10,	/* Fast charge completed */
-+	PCF50606_INT2_CHGPROT	= 0x20,	/* Charging protection interrupt */
-+	PCF50606_INT2_CHGWD10S	= 0x40,	/* Charger watchdig expires in 10s */
-+	PCF50606_INT2_CHGWDEXP	= 0x80,	/* Charger watchdog expires */
-+};
-+
-+enum pcf50606_reg_int3 {
-+	PCF50606_INT3_ADCRDY	= 0x01,	/* ADC conversion finished */
-+	PCF50606_INT3_ACDINS	= 0x02,	/* Accessory inserted */
-+	PCF50606_INT3_ACDREM	= 0x04, /* Accessory removed */
-+	PCF50606_INT3_TSCPRES	= 0x08,	/* Touch screen pressed */
-+	PCF50606_INT3_LOWBAT	= 0x40,	/* Low battery voltage */
-+	PCF50606_INT3_HIGHTMP	= 0x80, /* High temperature */
-+};
-+
-+/* used by PSSC, PWROKM, PWROKS, */
-+enum pcf50606_regu {
-+	PCF50606_REGU_DCD	= 0x01,	/* DCD in phase 2 */
-+	PCF50606_REGU_DCDE	= 0x02,	/* DCDE in phase 2 */
-+	PCF50606_REGU_DCUD	= 0x04,	/* DCDU in phase 2 */
-+	PCF50606_REGU_IO	= 0x08,	/* IO in phase 2 */
-+	PCF50606_REGU_D1	= 0x10, /* D1 in phase 2 */
-+	PCF50606_REGU_D2	= 0x20,	/* D2 in phase 2 */
-+	PCF50606_REGU_D3	= 0x40,	/* D3 in phase 2 */
-+	PCF50606_REGU_LP	= 0x80,	/* LP in phase 2 */
-+};
-+
-+enum pcf50606_reg_dcdc4 {
-+	PCF50606_DCDC4_MODE_AUTO	= 0x00,
-+	PCF50606_DCDC4_MODE_PWM		= 0x01,
-+	PCF50606_DCDC4_MODE_PCF		= 0x02,
-+	PCF50606_DCDC4_OFF_FLOAT	= 0x00,
-+	PCF50606_DCDC4_OFF_BYPASS	= 0x04,
-+	PCF50606_DCDC4_OFF_PULLDOWN	= 0x08,
-+	PCF50606_DCDC4_CURLIM_500mA	= 0x00,
-+	PCF50606_DCDC4_CURLIM_750mA	= 0x10,
-+	PCF50606_DCDC4_CURLIM_1000mA	= 0x20,
-+	PCF50606_DCDC4_CURLIM_1250mA	= 0x30,
-+	PCF50606_DCDC4_TOGGLE		= 0x40,
-+	PCF50606_DCDC4_REGSEL_DCDC2	= 0x80,
-+};
-+
-+enum pcf50606_reg_dcdec2 {
-+	PCF50606_DCDEC2_MODE_AUTO	= 0x00,
-+	PCF50606_DCDEC2_MODE_PWM	= 0x01,
-+	PCF50606_DCDEC2_MODE_PCF	= 0x02,
-+	PCF50606_DCDEC2_OFF_FLOAT	= 0x00,
-+	PCF50606_DCDEC2_OFF_BYPASS	= 0x04,
-+};
-+
-+enum pcf50606_reg_dcudc2 {
-+	PCF50606_DCUDC2_MODE_AUTO	= 0x00,
-+	PCF50606_DCUDC2_MODE_PWM	= 0x01,
-+	PCF50606_DCUDC2_MODE_PCF	= 0x02,
-+	PCF50606_DCUDC2_OFF_FLOAT	= 0x00,
-+	PCF50606_DCUDC2_OFF_BYPASS	= 0x04,
-+};
-+
-+enum pcf50606_reg_adcc1 {
-+	PCF50606_ADCC1_TSCMODACT	= 0x01,
-+	PCF50606_ADCC1_TSCMODSTB	= 0x02,
-+	PCF50606_ADCC1_TRATSET		= 0x04,
-+	PCF50606_ADCC1_NTCSWAPE		= 0x08,
-+	PCF50606_ADCC1_NTCSWAOFF	= 0x10,
-+	PCF50606_ADCC1_EXTSYNCBREAK	= 0x20,
-+	/* reserved */
-+	PCF50606_ADCC1_TSCINT		= 0x80,
-+};
-+
-+enum pcf50606_reg_adcc2 {
-+	PCF50606_ADCC2_ADCSTART		= 0x01,
-+	/* see enum pcf50606_adcc2_adcmux */
-+	PCF50606_ADCC2_SYNC_NONE	= 0x00,
-+	PCF50606_ADCC2_SYNC_TXON	= 0x20,
-+	PCF50606_ADCC2_SYNC_PWREN1	= 0x40,
-+	PCF50606_ADCC2_SYNC_PWREN2	= 0x60,
-+	PCF50606_ADCC2_RES_10BIT	= 0x00,
-+	PCF50606_ADCC2_RES_8BIT		= 0x80,
-+};
-+
-+#define PCF50606_ADCC2_ADCMUX_MASK	(0xf << 1)
-+
-+#define ADCMUX_SHIFT	1
-+enum pcf50606_adcc2_adcmux {
-+	PCF50606_ADCMUX_BATVOLT_RES	= 0x0 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_BATVOLT_SUBTR	= 0x1 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_ADCIN1_RES	= 0x2 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_ADCIN1_SUBTR	= 0x3 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_BATTEMP		= 0x4 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_ADCIN2		= 0x5 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_ADCIN3		= 0x6 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_ADCIN3_RATIO	= 0x7 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_XPOS		= 0x8 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_YPOS		= 0x9 << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_P1		= 0xa << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_P2		= 0xb << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_BATVOLT_ADCIN1	= 0xc << ADCMUX_SHIFT,
-+	PCF50606_ADCMUX_XY_SEQUENCE	= 0xe << ADCMUX_SHIFT,
-+	PCF50606_P1_P2_RESISTANCE	= 0xf << ADCMUX_SHIFT,
-+};
-+
-+enum pcf50606_adcs2 {
-+	PCF50606_ADCS2_ADCRDY		= 0x80,
-+};
-+
-+enum pcf50606_reg_mbcc1 {
-+	PCF50606_MBCC1_CHGAPE		= 0x01,
-+	PCF50606_MBCC1_AUTOFST		= 0x02,
-+#define	PCF50606_MBCC1_CHGMOD_MASK	  0x1c
-+#define	PCF50606_MBCC1_CHGMOD_SHIFT	  2
-+	PCF50606_MBCC1_CHGMOD_QUAL	= 0x00,
-+	PCF50606_MBCC1_CHGMOD_PRE	= 0x04,
-+	PCF50606_MBCC1_CHGMOD_TRICKLE	= 0x08,
-+	PCF50606_MBCC1_CHGMOD_FAST_CCCV	= 0x0c,
-+	PCF50606_MBCC1_CHGMOD_FAST_NOCC	= 0x10,
-+	PCF50606_MBCC1_CHGMOD_FAST_NOCV	= 0x14,
-+	PCF50606_MBCC1_CHGMOD_FAST_SW	= 0x18,
-+	PCF50606_MBCC1_CHGMOD_IDLE	= 0x1c,
-+	PCF50606_MBCC1_DETMOD_LOWCHG	= 0x20,
-+	PCF50606_MBCC1_DETMOD_WDRST	= 0x40,
-+};
-+
-+enum pcf50606_reg_bvmc {
-+	PCF50606_BVMC_LOWBAT		= 0x01,
-+	PCF50606_BVMC_THRSHLD_NULL	= 0x00,
-+	PCF50606_BVMC_THRSHLD_2V8	= 0x02,
-+	PCF50606_BVMC_THRSHLD_2V9	= 0x04,
-+	PCF50606_BVMC_THRSHLD_3V	= 0x08,
-+	PCF50606_BVMC_THRSHLD_3V1	= 0x08,
-+	PCF50606_BVMC_THRSHLD_3V2	= 0x0a,
-+	PCF50606_BVMC_THRSHLD_3V3	= 0x0c,
-+	PCF50606_BVMC_THRSHLD_3V4	= 0x0e,
-+	PCF50606_BVMC_DISDB		= 0x10,
-+};
-+
-+/* this is to be provided by the board implementation */
-+extern const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS];
-+
-+void pcf50606_reg_write(u_int8_t reg, u_int8_t val);
-+
-+u_int8_t pcf50606_reg_read(u_int8_t reg);
-+
-+void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val);
-+void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits);
-+
-+void pcf50606_init(void);
-+void pcf50606_charge_autofast(int on);
-+
-+#endif /* _PCF50606_H */
-+
-Index: u-boot/board/neo1973/common/cmd_neo1973.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/cmd_neo1973.c
-@@ -0,0 +1,99 @@
-+/*
-+ * (C) Copyright 2006 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Boot support
-+ */
-+#include <common.h>
-+#include <command.h>
-+#include <net.h>		/* for print_IPaddr */
-+#include <s3c2410.h>
-+
-+#include "neo1973.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_BDI)
-+
-+int do_neo1973 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	int i;
-+
-+	if (!strcmp(argv[1], "info")) {
-+		printf("FIC Neo1973 Hardware Revision 0x%04x\n", get_board_rev());
-+	} else if (!strcmp(argv[1], "power-off")) {
-+		neo1973_poweroff();
-+	} else if (!strcmp(argv[1], "charger") || !strcmp(argv[1], "charge")) {
-+		if (argc < 3)
-+			goto out_help;
-+		if (!strcmp(argv[2], "status") || !strcmp(argv[2], "state")) {
-+			printf("%s\n", neo1973_get_charge_status());
-+		} else if (!strcmp(argv[2], "autofast")) {
-+			neo1973_set_charge_mode(NEO1973_CHGCMD_AUTOFAST);
-+		} else if (!strcmp(argv[2], "!autofast")) {
-+			neo1973_set_charge_mode(NEO1973_CHGCMD_NO_AUTOFAST);
-+		} else if (!strcmp(argv[2], "off")) {
-+			neo1973_set_charge_mode(NEO1973_CHGCMD_OFF);
-+		} else if (!strcmp(argv[2], "fast")) {
-+			neo1973_set_charge_mode(NEO1973_CHGCMD_FAST);
-+		} else
-+			goto out_help;
-+	} else if (!strcmp(argv[1], "backlight")) {
-+		if (argc < 3)
-+			goto out_help;
-+		if (!strcmp(argv[2], "on"))
-+			neo1973_backlight(1);
-+		else
-+			neo1973_backlight(0);
-+	} else if (!strcmp(argv[1], "vibrator")) {
-+		if (argc < 3)
-+			goto out_help;
-+		if (!strcmp(argv[2], "on"))
-+			neo1973_vibrator(1);
-+		else
-+			neo1973_vibrator(0);
-+	} else {
-+out_help:
-+		printf("Usage:\n%s\n", cmdtp->usage);
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+/* -------------------------------------------------------------------- */
-+
-+U_BOOT_CMD(
-+	neo1973,	4,	1,	do_neo1973,
-+	"neo1973 - phone specific commands\n",
-+	"neo1973 info - display phone informantion\n"
-+	"neo1973 power-off - switch off the phone\n"
-+	"neo1973 charger status - display charger status\n"
-+	"neo1973 charger autofast - enable automatic fast (500mA) charging\n"
-+	"neo1973 charger !autofast - disable automatic fast (500mA) charging\n"
-+	"neo1973 charger fast - enable fast (500mA) charging\n"
-+	"neo1973 charger off - disable charging\n"
-+	"neo1973 backlight (on|off) - switch backlight on or off\n"
-+	"neo1973 vibrator (on|off) - switch vibrator on or off\n"
-+);
-+#endif	/* CFG_CMD_BDI */
-Index: u-boot/board/neo1973/common/jbt6k74.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/jbt6k74.c
-@@ -0,0 +1,420 @@
-+/* u-boot driver for the tpo JBT6K74-AS LCM ASIC
-+ *
-+ * Copyright (C) 2006-2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ * All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ */
-+#include <common.h>
-+#include <spi.h>
-+#include <video_fb.h>
-+#include <asm/errno.h>
-+#include <s3c2410.h>
-+#include "jbt6k74.h"
-+
-+#if 0
-+#define DEBUGP(x, args...) printf("%s: " x, __FUNCTION__, ## args);
-+#define DEBUGPC(x, args...) printf(x, ## args);
-+#else
-+#define DEBUGP(x, args...) do { } while (0)
-+#define DEBUGPC(x, args...) do { } while (0)
-+#endif
-+
-+
-+enum jbt_register {
-+	JBT_REG_SLEEP_IN		= 0x10,
-+	JBT_REG_SLEEP_OUT		= 0x11,
-+
-+	JBT_REG_DISPLAY_OFF		= 0x28,
-+	JBT_REG_DISPLAY_ON		= 0x29,
-+
-+	JBT_REG_RGB_FORMAT		= 0x3a,
-+	JBT_REG_QUAD_RATE		= 0x3b,
-+
-+	JBT_REG_POWER_ON_OFF		= 0xb0,
-+	JBT_REG_BOOSTER_OP		= 0xb1,
-+	JBT_REG_BOOSTER_MODE		= 0xb2,
-+	JBT_REG_BOOSTER_FREQ		= 0xb3,
-+	JBT_REG_OPAMP_SYSCLK		= 0xb4,
-+	JBT_REG_VSC_VOLTAGE		= 0xb5,
-+	JBT_REG_VCOM_VOLTAGE		= 0xb6,
-+	JBT_REG_EXT_DISPL		= 0xb7,
-+	JBT_REG_OUTPUT_CONTROL		= 0xb8,
-+	JBT_REG_DCCLK_DCEV		= 0xb9,
-+	JBT_REG_DISPLAY_MODE1		= 0xba,
-+	JBT_REG_DISPLAY_MODE2		= 0xbb,
-+	JBT_REG_DISPLAY_MODE		= 0xbc,
-+	JBT_REG_ASW_SLEW		= 0xbd,
-+	JBT_REG_DUMMY_DISPLAY		= 0xbe,
-+	JBT_REG_DRIVE_SYSTEM		= 0xbf,
-+
-+	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
-+	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
-+	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
-+	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
-+	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
-+	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
-+	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
-+
-+	JBT_REG_GAMMA1_FINE_1		= 0xc7,
-+	JBT_REG_GAMMA1_FINE_2		= 0xc8,
-+	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
-+	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
-+
-+	JBT_REG_BLANK_CONTROL		= 0xcf,
-+	JBT_REG_BLANK_TH_TV		= 0xd0,
-+	JBT_REG_CKV_ON_OFF		= 0xd1,
-+	JBT_REG_CKV_1_2			= 0xd2,
-+	JBT_REG_OEV_TIMING		= 0xd3,
-+	JBT_REG_ASW_TIMING_1		= 0xd4,
-+	JBT_REG_ASW_TIMING_2		= 0xd5,
-+
-+	JBT_REG_HCLOCK_VGA		= 0xec,
-+	JBT_REG_HCLOCK_QVGA		= 0xed,
-+
-+};
-+
-+static const char *jbt_state_names[] = {
-+	[JBT_STATE_DEEP_STANDBY]	= "deep-standby",
-+	[JBT_STATE_SLEEP]		= "sleep",
-+	[JBT_STATE_NORMAL]		= "normal",
-+};
-+
-+#define GTA01_SCLK	(1 << 7) 	/* GPG7 */
-+#define GTA01_MOSI	(1 << 6)	/* GPG6 */
-+#define GTA01_MISO	(1 << 5)	/* GPG5 */
-+#define GTA01_CS	(1 << 3)	/* GPG3 */
-+
-+#define SPI_READ        ((immr->GPGDAT & GTA01_MISO) != 0)
-+
-+#define SPI_CS(bit) 	if (bit) gpio->GPGDAT |= GTA01_CS; \
-+			else gpio->GPGDAT &= ~GTA01_CS
-+
-+#define SPI_SDA(bit)    if (bit) gpio->GPGDAT |=  GTA01_MOSI; \
-+			else    gpio->GPGDAT &= ~GTA01_MOSI
-+
-+#define SPI_SCL(bit)    if (bit) gpio->GPGDAT |=  GTA01_SCLK; \
-+			else    gpio->GPGDAT &= ~GTA01_SCLK
-+
-+/* 150uS minimum clock cycle, we have two of this plus our other
-+ * instructions */
-+#define SPI_DELAY	udelay(100)	/* 200uS */
-+
-+
-+#define JBT_TX_BUF_SIZE
-+struct jbt_info {
-+	enum jbt_state state;
-+	u_int16_t tx_buf[4];
-+	struct spi_device *spi_dev;
-+};
-+
-+static struct jbt_info _jbt, *jbt = &_jbt;
-+
-+static int jbt_spi_xfer(int wordnum, int bitlen, u_int16_t *dout)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+	u_int16_t tmpdout = 0;
-+	int   i, j;
-+
-+	DEBUGP("spi_xfer: dout %08X wordnum %u bitlen %d\n",
-+		*(uint *)dout, wordnum, bitlen);
-+
-+	SPI_CS(0);
-+
-+	for (i = 0; i < wordnum; i ++) {
-+		tmpdout = dout[i];
-+
-+		for (j = 0; j < bitlen; j++) {
-+			SPI_SCL(0);
-+			if (tmpdout & (1 << bitlen-1)) {
-+				SPI_SDA(1);
-+				DEBUGPC("1");
-+			} else {
-+				SPI_SDA(0);
-+				DEBUGPC("0");
-+			}
-+			SPI_DELAY;
-+			SPI_SCL(1);
-+			SPI_DELAY;
-+			tmpdout <<= 1;
-+		}
-+		DEBUGPC(" ");
-+	}
-+	DEBUGPC("\n");
-+
-+	SPI_CS(1);
-+
-+	return 0;
-+}
-+
-+#define JBT_COMMAND	0x000
-+#define JBT_DATA	0x100
-+
-+static int jbt_reg_write_nodata(struct jbt_info *jbt, u_int8_t reg)
-+{
-+	int rc;
-+
-+	jbt->tx_buf[0] = JBT_COMMAND | reg;
-+
-+	rc = jbt_spi_xfer(1, 9, jbt->tx_buf);
-+
-+	return rc;
-+}
-+
-+
-+static int jbt_reg_write(struct jbt_info *jbt, u_int8_t reg, u_int8_t data)
-+{
-+	int rc;
-+
-+	jbt->tx_buf[0] = JBT_COMMAND | reg;
-+	jbt->tx_buf[1] = JBT_DATA | data;
-+
-+	rc = jbt_spi_xfer(2, 9, jbt->tx_buf);
-+
-+	return rc;
-+}
-+
-+static int jbt_reg_write16(struct jbt_info *jbt, u_int8_t reg, u_int16_t data)
-+{
-+	int rc;
-+
-+	jbt->tx_buf[0] = JBT_COMMAND | reg;
-+	jbt->tx_buf[1] = JBT_DATA | (data >> 8);
-+	jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
-+
-+	rc = jbt_spi_xfer(3, 9, jbt->tx_buf);
-+
-+	return rc;
-+}
-+
-+static int jbt_init_regs(struct jbt_info *jbt)
-+{
-+	int rc;
-+
-+	DEBUGP("entering\n");
-+
-+	rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
-+	rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
-+	rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
-+	rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
-+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
-+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
-+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
-+	rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
-+	rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
-+	rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
-+	rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
-+	rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
-+	rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
-+	rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x02);
-+	rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
-+
-+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
-+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
-+	rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
-+
-+	rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
-+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
-+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
-+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
-+	rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
-+
-+	rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
-+	rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
-+
-+	rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
-+
-+	rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
-+	rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
-+
-+#if 0
-+	rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
-+#endif
-+
-+	return rc;
-+}
-+
-+static int standby_to_sleep(struct jbt_info *jbt)
-+{
-+	int rc;
-+
-+	DEBUGP("entering\n");
-+
-+	/* three times command zero */
-+	rc = jbt_reg_write_nodata(jbt, 0x00);
-+	udelay(1000);
-+	rc = jbt_reg_write_nodata(jbt, 0x00);
-+	udelay(1000);
-+	rc = jbt_reg_write_nodata(jbt, 0x00);
-+	udelay(1000);
-+
-+	/* deep standby out */
-+	rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x17);
-+
-+	return rc;
-+}
-+
-+static int sleep_to_normal(struct jbt_info *jbt)
-+{
-+	int rc;
-+	DEBUGP("entering\n");
-+
-+	/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
-+	rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
-+
-+	/* Quad mode off */
-+	rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
-+
-+	/* AVDD on, XVDD on */
-+	rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
-+
-+	/* Output control */
-+	rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
-+
-+	/* Sleep mode off */
-+	rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
-+
-+	/* initialize register set */
-+	rc |= jbt_init_regs(jbt);
-+	return rc;
-+}
-+
-+static int normal_to_sleep(struct jbt_info *jbt)
-+{
-+	int rc;
-+	DEBUGP("entering\n");
-+
-+	rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
-+	rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002);
-+	rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
-+
-+	return rc;
-+}
-+
-+static int sleep_to_standby(struct jbt_info *jbt)
-+{
-+	DEBUGP("entering\n");
-+	return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
-+}
-+
-+/* frontend function */
-+int jbt6k74_enter_state(enum jbt_state new_state)
-+{
-+	int rc = -EINVAL;
-+
-+	DEBUGP("entering(old_state=%u, new_state=%u)\n", jbt->state, new_state);
-+
-+	switch (jbt->state) {
-+	case JBT_STATE_DEEP_STANDBY:
-+		switch (new_state) {
-+		case JBT_STATE_DEEP_STANDBY:
-+			rc = 0;
-+			break;
-+		case JBT_STATE_SLEEP:
-+			rc = standby_to_sleep(jbt);
-+			break;
-+		case JBT_STATE_NORMAL:
-+			/* first transition into sleep */
-+			rc = standby_to_sleep(jbt);
-+			/* then transition into normal */
-+			rc |= sleep_to_normal(jbt);
-+			break;
-+		}
-+		break;
-+	case JBT_STATE_SLEEP:
-+		switch (new_state) {
-+		case JBT_STATE_SLEEP:
-+			rc = 0;
-+			break;
-+		case JBT_STATE_DEEP_STANDBY:
-+			rc = sleep_to_standby(jbt);
-+			break;
-+		case JBT_STATE_NORMAL:
-+			rc = sleep_to_normal(jbt);
-+			break;
-+		}
-+		break;
-+	case JBT_STATE_NORMAL:
-+		switch (new_state) {
-+		case JBT_STATE_NORMAL:
-+			rc = 0;
-+			break;
-+		case JBT_STATE_DEEP_STANDBY:
-+			/* first transition into sleep */
-+			rc = normal_to_sleep(jbt);
-+			/* then transition into deep standby */
-+			rc |= sleep_to_standby(jbt);
-+			break;
-+		case JBT_STATE_SLEEP:
-+			rc = normal_to_sleep(jbt);
-+			break;
-+		}
-+		break;
-+	}
-+
-+	return rc;
-+}
-+
-+int jbt6k74_display_onoff(int on)
-+{
-+	DEBUGP("entering\n");
-+	if (on)
-+		return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
-+	else
-+		return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
-+}
-+
-+int jbt6k74_init(void)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	/* initialize SPI for GPIO bitbang */
-+	gpio->GPGCON &= 0xffff033f;
-+	gpio->GPGCON |= 0x00005440;
-+
-+	/* get LCM out of reset */
-+	gpio->GPCDAT |= (1 << 6);
-+
-+	/* according to data sheet: wait 50ms (Tpos of LCM). However, 50ms
-+	 * seems unreliable with later LCM batches, increasing to 90ms */
-+	udelay(90000);
-+
-+	return 0;
-+}
-+
-+void board_video_init(GraphicDevice *pGD)
-+{
-+	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-+
-+	lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */
-+
-+	lcd->LCDCON2 = 0x019fc3c1;
-+	lcd->LCDCON3 = 0x0039df67;
-+	lcd->LCDCON4 = 0x00000007;
-+	lcd->LCDCON5 = 0x0001cf09;
-+	lcd->LPCSEL  = 0x00000000;
-+}
-Index: u-boot/board/neo1973/common/jbt6k74.h
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/jbt6k74.h
-@@ -0,0 +1,14 @@
-+#ifndef _JBT6K74_H
-+#define _JBT6K74_H
-+
-+enum jbt_state {
-+	JBT_STATE_DEEP_STANDBY,
-+	JBT_STATE_SLEEP,
-+	JBT_STATE_NORMAL,
-+};
-+
-+int jbt6k74_init(void);
-+int jbt6k74_display_onoff(int on);
-+int jbt6k74_enter_state(enum jbt_state new_state);
-+
-+#endif
-Index: u-boot/board/neo1973/common/lowlevel_init.S
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/lowlevel_init.S
-@@ -0,0 +1,187 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
-+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
-+ *
-+ * Modified for the FIC Neo1973 GTA01 by Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE  <hitchcar@sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON	0x48000000
-+
-+/* BWSCON */
-+#define DW8		 	(0x0)
-+#define DW16		 	(0x1)
-+#define DW32		 	(0x2)
-+#define WAIT		 	(0x1<<2)
-+#define UBLB		 	(0x1<<3)
-+
-+#define B1_BWSCON	  	(DW32)
-+#define B2_BWSCON	  	(DW16)
-+#define B3_BWSCON	  	(DW16 + WAIT + UBLB)
-+#define B4_BWSCON	  	(DW16)
-+#define B5_BWSCON	  	(DW16)
-+#define B6_BWSCON	  	(DW32)
-+#define B7_BWSCON	  	(DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs		 	0x0	/*  0clk */
-+#define B0_Tcos		 	0x0	/*  0clk */
-+#define B0_Tacc		 	0x7	/* 14clk */
-+#define B0_Tcoh		 	0x0	/*  0clk */
-+#define B0_Tah		 	0x0	/*  0clk */
-+#define B0_Tacp		 	0x0
-+#define B0_PMC		 	0x0	/* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs		 	0x0	/*  0clk */
-+#define B1_Tcos		 	0x0	/*  0clk */
-+#define B1_Tacc		 	0x7	/* 14clk */
-+#define B1_Tcoh		 	0x0	/*  0clk */
-+#define B1_Tah		 	0x0	/*  0clk */
-+#define B1_Tacp		 	0x0
-+#define B1_PMC		 	0x0
-+
-+#define B2_Tacs		 	0x0
-+#define B2_Tcos		 	0x0
-+#define B2_Tacc		 	0x7
-+#define B2_Tcoh		 	0x0
-+#define B2_Tah		 	0x0
-+#define B2_Tacp		 	0x0
-+#define B2_PMC		 	0x0
-+
-+#define B3_Tacs		 	0x0	/*  0clk */
-+#define B3_Tcos		 	0x3	/*  4clk */
-+#define B3_Tacc		 	0x7	/* 14clk */
-+#define B3_Tcoh		 	0x1	/*  1clk */
-+#define B3_Tah		 	0x0	/*  0clk */
-+#define B3_Tacp		 	0x3     /*  6clk */
-+#define B3_PMC		 	0x0	/* normal */
-+
-+#define B4_Tacs		 	0x0	/*  0clk */
-+#define B4_Tcos		 	0x0	/*  0clk */
-+#define B4_Tacc		 	0x7	/* 14clk */
-+#define B4_Tcoh		 	0x0	/*  0clk */
-+#define B4_Tah		 	0x0	/*  0clk */
-+#define B4_Tacp		 	0x0
-+#define B4_PMC		 	0x0	/* normal */
-+
-+#define B5_Tacs		 	0x0	/*  0clk */
-+#define B5_Tcos		 	0x0	/*  0clk */
-+#define B5_Tacc		 	0x7	/* 14clk */
-+#define B5_Tcoh		 	0x0	/*  0clk */
-+#define B5_Tah		 	0x0	/*  0clk */
-+#define B5_Tacp		 	0x0
-+#define B5_PMC		 	0x0	/* normal */
-+
-+#define B6_MT		 	0x3	/* SDRAM */
-+#define B6_Trcd	 	 	0x1	/* 3clk */
-+#if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+#define B6_SCAN		 	0x1	/* 9bit */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-+      defined(CONFIG_ARCH_GTA01B_v4)
-+#define B6_SCAN		 	0x2	/* 10bit */
-+#endif
-+
-+#define B7_MT		 	0x3	/* SDRAM */
-+#define B7_Trcd		 	0x1	/* 3clk */
-+#define B7_SCAN		 	0x2	/* 10bit */
-+
-+/* REFRESH parameter */
-+#define REFEN		 	0x1	/* Refresh enable */
-+#define TREFMD		 	0x0	/* CBR(CAS before RAS)/Auto refresh */
-+#define Trp		 	0x1	/* 3clk */
-+#define Trc		 	0x3	/* 7clk */
-+#define Tchr		 	0x2	/* 3clk */
-+//#define REFCNT		 	1113	/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+#define REFCNT		 	997	/* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+	.word	TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+	/* memory control configuration */
-+	/* make r0 relative the current location so that it */
-+	/* reads SMRDATA out of FLASH rather than memory ! */
-+	adr	r0, SMRDATA
-+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
-+	add     r2, r0, #13*4
-+0:
-+	ldr     r3, [r0], #4
-+	str     r3, [r1], #4
-+	cmp     r2, r0
-+	bne     0b
-+
-+	/* setup asynchronous bus mode */
-+	mrc	p15, 0, r1 ,c1 ,c0, 0
-+	orr	r1, r1, #0xc0000000
-+	mcr	p15, 0, r1, c1, c0, 0
-+
-+#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+	/* switch on power for NAND */
-+	ldr	r0, =0x56000010	/* GPBCON */
-+	ldr	r1, [r0]
-+	orr	r1, r1, #0x10
-+	str	r1, [r0]
-+
-+	ldr	r0, =0x56000014	/* GPBDAT */
-+	ldr	r1, [r0]
-+	orr	r1, r1, #(1 <<2)
-+	str	r1, [r0]
-+#endif
-+
-+	/* everything is fine now */
-+	mov	pc, lr
-+
-+	.ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+    .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+    .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+    .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+    .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+    .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+    .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+    .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+    .word 0xb2
-+    .word 0x30
-+    .word 0x30
-Index: u-boot/board/neo1973/gta01/Makefile
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/Makefile
-@@ -0,0 +1,47 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= lib$(BOARD).a
-+
-+OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o
-+SOBJS	:= ../common/lowlevel_init.o
-+
-+$(LIB):	$(OBJS) $(SOBJS)
-+	$(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-Index: u-boot/board/neo1973/gta01/config.mk
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/config.mk
-@@ -0,0 +1,34 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+#
-+# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+# GTA01v3 has 1 bank of 64 MB SDRAM
-+# GTA01v4 has 1 bank of 64 MB SDRAM
-+#
-+# 	3000'0000 to 3400'0000
-+# we load ourself to 33F8'0000
-+#
-+# GTA01Bv2 or later has 1 bank of 128 MB SDRAM
-+#
-+# 	3000'0000 to 3800'0000
-+# we load ourself to 37F8'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# download area is 3200'0000 or 3300'0000
-+
-+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-+
-+ifeq ($(GTA01_BIG_RAM),y)
-+# FIXME: TEXT_BASE = 0x37F80000
-+TEXT_BASE = 0x33F80000
-+else
-+TEXT_BASE = 0x33F80000
-+endif
-Index: u-boot/board/neo1973/gta01/gta01.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/gta01.c
-@@ -0,0 +1,422 @@
-+/*
-+ * (C) 2006 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on existing S3C2410 startup code in u-boot:
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2410.h>
-+#include <i2c.h>
-+
-+#include "pcf50606.h"
-+
-+#include "../common/neo1973.h"
-+#include "../common/jbt6k74.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* That many seconds the power key needs to be pressed to power up */
-+#define POWER_KEY_SECONDS	2
-+
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+//#define M_MDIV	0xA1		/* Fout = 202.8MHz */
-+//#define M_PDIV	0x3
-+//#define M_SDIV	0x1
-+#define M_MDIV	0x90		/* Fout = 202.8MHz */
-+#define M_PDIV	0x7
-+#define M_SDIV	0x0
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+/* In case the debug board is attached, we cannot go beyond 200 MHz */
-+#if 0
-+#define M_MDIV	0x7d		/* Fout = 266MHz */
-+#define M_PDIV	0x1
-+#define M_SDIV	0x1
-+#else
-+#define M_MDIV	0x90		/* Fout = 202.8MHz */
-+#define M_PDIV	0x7
-+#define M_SDIV	0x0
-+#endif
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+/* This board doesn't have bus lines at teh debug port, and we can go to 266 */
-+#define M_MDIV	0x7d		/* Fout = 266MHz */
-+#define M_PDIV	0x1
-+#define M_SDIV	0x1
-+#else
-+#error Please define GTA01 revision
-+#endif
-+
-+#define U_M_MDIV	0x78
-+#define U_M_PDIV	0x2
-+#define U_M_SDIV	0x3
-+
-+unsigned int neo1973_wakeup_cause;
-+extern int nobootdelay;
-+
-+static inline void delay (unsigned long loops)
-+{
-+	__asm__ volatile ("1:\n"
-+	  "subs %0, %1, #1\n"
-+	  "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	/* to reduce PLL lock time, adjust the LOCKTIME register */
-+	clk_power->LOCKTIME = 0xFFFFFF;
-+
-+	/* configure MPLL */
-+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (4000);
-+
-+	/* configure UPLL */
-+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (8000);
-+
-+	/* set up the I/O ports */
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+	gpio->GPACON = 0x007FFFFF;
-+
-+	gpio->GPBCON = 0x00005055;
-+	gpio->GPBUP = 0x000007FF;
-+
-+	gpio->GPCCON = 0xAAAA12A8;
-+	gpio->GPCUP = 0x0000FFFF;
-+
-+	gpio->GPDCON = 0xAAAAAAAA;
-+	gpio->GPDUP = 0x0000FFFF;
-+
-+	gpio->GPECON = 0xAAAAAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+
-+	gpio->GPFCON = 0x00002AA9;
-+	gpio->GPFUP = 0x000000FF;
-+
-+	gpio->GPGCON = 0xA846F0C0;
-+	gpio->GPGUP = 0x0000AFEF;
-+
-+	gpio->GPHCON = 0x0008FAAA;
-+	gpio->GPHUP = 0x000007FF;
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+	gpio->GPACON = 0x005E47FF;
-+
-+	gpio->GPBCON = 0x00045015;
-+	gpio->GPBUP = 0x000007FF;
-+	gpio->GPBDAT |= 0x4;		/* Set GPB2 to high (Flash power-up) */
-+
-+	gpio->GPCCON = 0xAAAA12A9;
-+	gpio->GPCUP = 0x0000FFFF;
-+
-+	gpio->GPDCON = 0xAAAAAAAA;
-+	gpio->GPDUP = 0x0000FFFF;
-+
-+	gpio->GPECON = 0xA02AAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+
-+	gpio->GPFCON = 0x0000aa09;
-+	gpio->GPFUP = 0x000000FF;
-+
-+	gpio->GPGCON = 0xFF40F0C1;
-+	gpio->GPGUP = 0x0000AFEF;
-+
-+	gpio->GPHCON = 0x0000FAAA;
-+	gpio->GPHUP = 0x000007FF;
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+	gpio->GPACON = 0x005E4FFF;
-+
-+	gpio->GPBCON = 0x00145415;
-+	gpio->GPBUP = 0x000007FF;
-+	gpio->GPBDAT |= 0x4;		/* Set GPB2 to high (Flash power-up) */
-+
-+	gpio->GPCCON = 0xAAAA12A9;
-+	gpio->GPCUP = 0x0000FFFF;
-+
-+	gpio->GPDCON = 0xAAAAAAAA;
-+	gpio->GPDUP = 0x0000FFFF;
-+
-+	gpio->GPECON = 0xA02AAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+
-+	gpio->GPFCON = 0x0000aa19;
-+	gpio->GPFUP = 0x000000FF;
-+	gpio->GPFDAT |= 0x4;		/* Set GBF2 to high (nGSM_EN) */
-+
-+	gpio->GPGCON = 0xFF40F0C1;
-+	gpio->GPGUP = 0x0000AFEF;
-+
-+	gpio->GPHCON = 0x0000FAAA;
-+	gpio->GPHUP = 0x000007FF;
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+	gpio->GPACON = 0x0005E0FFF;
-+	gpio->GPADAT |= (1 << 16);	/* Set GPA16 to high (nNAND_WP) */
-+
-+	gpio->GPBCON = 0x00045455;
-+	gpio->GPBUP = 0x000007FF;
-+	gpio->GPBDAT |= 0x4;            /* Set GPB2 to high (SD power down) */
-+
-+	gpio->GPCCON = 0xAAAA12A9;
-+	gpio->GPCUP = 0x0000FFFF;
-+
-+	gpio->GPDCON = 0xAAAAAAAA;
-+	gpio->GPDUP = 0x0000FFFF;
-+
-+	gpio->GPECON = 0xAAAAAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+
-+	gpio->GPFCON = 0x0000aa99;
-+	gpio->GPFUP = 0x000000FF;
-+	gpio->GPFDAT |= 0x4;		/* Set GBF2 to high (nGSM_EN) */
-+
-+	gpio->GPGCON = 0xFF14F0F8;
-+	gpio->GPGUP = 0x0000AFEF;
-+
-+	gpio->GPHCON = 0x0000FAAA;
-+	gpio->GPHUP = 0x000007FF;
-+#else
-+#error Please define GTA01 version
-+#endif
-+
-+	/* arch number of SMDK2410-Board */
-+	gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA01;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0x30000100;
-+
-+	icache_enable();
-+	dcache_enable();
-+
-+	return 0;
-+}
-+
-+int board_late_init(void)
-+{
-+	unsigned char tmp;
-+	char buf[32];
-+
-+	/* Initialize the Power Management Unit with a safe register set */
-+	pcf50606_init();
-+
-+	/* obtain wake-up reason, save INT1 in environment */
-+	tmp = pcf50606_reg_read(PCF50606_REG_INT1);
-+	sprintf(buf, "0x%02x", tmp);
-+	setenv("pcf50606_int1", buf);
-+
-+	if (tmp & PCF50606_INT1_ALARM) {
-+		/* we've been woken up by RTC alarm or charger insert, boot */
-+		neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM;
-+		goto continue_boot;
-+	}
-+	if (tmp & PCF50606_INT1_EXTONR) {
-+		neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER;
-+	}
-+
-+	if (tmp & PCF50606_INT1_ONKEYF) {
-+		int seconds = 0;
-+		neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY;
-+		/* we've been woken up by a falling edge of the onkey */
-+
-+		/* we can't just setenv(bootdelay,-1) because that would
-+		 * accidentially become permanent if the user does saveenv */
-+		if (neo1973_911_key_pressed())
-+			nobootdelay = 1;
-+
-+		while (1) {
-+			u_int8_t int1, oocs;
-+
-+			oocs = pcf50606_reg_read(PCF50606_REG_OOCS);
-+			if (oocs & PFC50606_OOCS_ONKEY)
-+				break;
-+
-+			int1 = pcf50606_reg_read(PCF50606_REG_INT1);
-+			if (int1 & PCF50606_INT1_SECOND)
-+				seconds++;
-+
-+			if (seconds >= POWER_KEY_SECONDS)
-+				goto continue_boot;
-+		}
-+		/* Power off if minimum number of seconds not reached */
-+		neo1973_poweroff();
-+	}
-+
-+	/* if there's no other reason, must be regular reset */
-+	neo1973_wakeup_cause = NEO1973_WAKEUP_RESET;
-+
-+continue_boot:
-+	jbt6k74_init();
-+	jbt6k74_enter_state(JBT_STATE_NORMAL);
-+	jbt6k74_display_onoff(1);
-+
-+	/* issue a short pulse with the vibrator */
-+	neo1973_vibrator(1);
-+	udelay(50000);
-+	neo1973_vibrator(0);
-+
-+	/* switch on the backlight */
-+	neo1973_backlight(1);
-+
-+#if defined(CONFIG_ARCH_GTA01B_v4)
-+	{
-+		/* check if sd card is inserted, and power-up if it is */
-+		S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+		if (!(gpio->GPFDAT & (1 << 5)))
-+			gpio->GPBDAT &= ~(1 << 2);
-+	}
-+#endif
-+
-+	return 0;
-+}
-+
-+int dram_init (void)
-+{
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+	return 0;
-+}
-+
-+u_int32_t get_board_rev(void)
-+{
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+	return 0x00000130;
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+	return 0x00000140;
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+	return 0x00000220;
-+#elif defined(CONFIG_ARCH_GTA01B_v3)
-+	return 0x00000230;
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+	return 0x00000240;
-+#endif
-+}
-+
-+void neo1973_poweroff(void)
-+{
-+	serial_printf("poweroff\n");
-+	udc_disconnect();
-+	pcf50606_reg_write(PCF50606_REG_OOCC1, PCF50606_OOCC1_GOSTDBY);
-+	/* don't return to caller */
-+	while (1) ;
-+}
-+
-+void neo1973_backlight(int on)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+	if (on)
-+		gpio->GPBDAT |= 0x01;
-+	else
-+		gpio->GPBDAT &= ~0x01;
-+}
-+
-+void neo1973_vibrator(int on)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+	if (on)
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+		gpio->GPGDAT |= (1 << 11);	/* GPG11 */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+		gpio->GPBDAT |= (1 << 10);	/* GPB10 */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+		gpio->GPBDAT |= (1 << 3);	/* GPB3 */
-+#endif
-+	else
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+		gpio->GPGDAT &= ~(1 << 11);	/* GPG11 */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+		gpio->GPBDAT &= ~(1 << 10);	/* GPB10 */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+		gpio->GPBDAT &= ~(1 << 3);	/* GPB3 */
-+#endif
-+}
-+
-+int neo1973_911_key_pressed(void)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+	if (gpio->GPFDAT & (1 << 6))
-+		return 0;
-+	return 1;
-+}
-+
-+static const char *chgstate_names[] = {
-+	[PCF50606_MBCC1_CHGMOD_QUAL]		= "qualification",
-+	[PCF50606_MBCC1_CHGMOD_PRE]		= "pre",
-+	[PCF50606_MBCC1_CHGMOD_TRICKLE]		= "trickle",
-+	[PCF50606_MBCC1_CHGMOD_FAST_CCCV]	= "fast_cccv",
-+	[PCF50606_MBCC1_CHGMOD_FAST_NOCC]	= "fast_nocc",
-+	[PCF50606_MBCC1_CHGMOD_FAST_NOCV]	= "fast_nocv",
-+	[PCF50606_MBCC1_CHGMOD_FAST_SW]		= "fast_switch",
-+	[PCF50606_MBCC1_CHGMOD_IDLE]		= "idle",
-+};
-+
-+const char *neo1973_get_charge_status(void)
-+{
-+	u_int8_t mbcc1 = pcf50606_reg_read(PCF50606_REG_MBCC1);
-+	u_int8_t chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK);
-+	return chgstate_names[chgmod];
-+}
-+
-+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd)
-+{
-+	switch (cmd) {
-+	case NEO1973_CHGCMD_NONE:
-+		break;
-+	case NEO1973_CHGCMD_AUTOFAST:
-+		pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+					  PCF50606_MBCC1_AUTOFST,
-+					  PCF50606_MBCC1_AUTOFST);
-+		break;
-+	case NEO1973_CHGCMD_NO_AUTOFAST:
-+		pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+					  PCF50606_MBCC1_AUTOFST, 0);
-+		break;
-+	case NEO1973_CHGCMD_OFF:
-+		pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+					  PCF50606_MBCC1_CHGMOD_MASK,
-+					  PCF50606_MBCC1_CHGMOD_IDLE);
-+		break;
-+
-+	case NEO1973_CHGCMD_FAST:
-+	case NEO1973_CHGCMD_FASTER:
-+		pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+					  PCF50606_MBCC1_CHGMOD_MASK,
-+					  PCF50606_MBCC1_CHGMOD_FAST_CCCV);
-+		break;
-+	}
-+	return 0;
-+}
-+
-Index: u-boot/board/neo1973/gta01/pcf50606.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/pcf50606.c
-@@ -0,0 +1,100 @@
-+
-+#include <common.h>
-+#include <pcf50606.h>
-+
-+/* initial register set for PCF50606 in Neo1973 devices */
-+const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = {
-+	[PCF50606_REG_OOCS] 	= 0x00,
-+	/* gap */
-+	[PCF50606_REG_INT1M]	= PCF50606_INT1_SECOND,
-+	[PCF50606_REG_INT2M]	= 0x00,
-+	[PCF50606_REG_INT3M]	= PCF50606_INT3_TSCPRES,
-+	[PCF50606_REG_OOCC1] 	= PCF50606_OOCC1_RTCWAK |
-+				  PCF50606_OOCC1_CHGWAK |
-+				  PCF50606_OOCC1_EXTONWAK_HIGH,
-+	[PCF50606_REG_OOCC2]	= PCF50606_OOCC2_ONKEYDB_14ms |
-+				  PCF50606_OOCC2_EXTONDB_14ms,
-+	/* gap */
-+	[PCF50606_REG_PSSC]	= 0x00,
-+	[PCF50606_REG_PWROKM]	= 0x00,
-+	/* gap */
-+#if defined(CONFIG_ARCH_GTA01B_v2)
-+	[PCF50606_REG_DCDC1]	= 0x1e,	/* GL_3V3: off */
-+#elif defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
-+	[PCF50606_REG_DCDC1]	= 0x18,	/* GL_1V5: off */
-+#endif
-+	[PCF50606_REG_DCDC2]	= 0x00,
-+	[PCF50606_REG_DCDC3]	= 0x00,
-+	[PCF50606_REG_DCDC4]	= 0x30, /* 1.25A */
-+
-+	[PCF50606_REG_DCDEC1]	= 0xe8, /* IO_3V3: on */
-+	[PCF50606_REG_DCDEC2]	= 0x00,
-+
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+	[PCF50606_REG_DCUDC1]	= 0xe3, /* CORE_1V8: 1.8V */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+	[PCF50606_REG_DCUDC1]	= 0xe4, /* CORE_1V8: 2.1V */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+	[PCF50606_REG_DCUDC1]	= 0xc4, /* CORE_1V8: 2.1V if PWREN2 = HIGH */
-+#endif
-+	[PCF50606_REG_DCUDC2]	= 0x30, /* 1.25A current limit */
-+
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+	[PCF50606_REG_IOREGC]	= 0x13, /* VTCXO_2V8: off */
-+#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \
-+      defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
-+	//see internal bug 94 [PCF50606_REG_IOREGC]	= 0x18, /* CODEC_3V3: off */
-+	[PCF50606_REG_IOREGC]	= 0xf8, /* CODEC_3V3: on */
-+#endif
-+
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+	[PCF50606_REG_D1REGC1]	= 0x15, /* VRF_3V: off */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-+      defined(CONFIG_ARCH_GTA01B_v4)
-+	[PCF50606_REG_D1REGC1]	= 0x16, /* BT_3V15: off */
-+#endif
-+
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+	[PCF50606_REG_D2REGC1]	= 0xf8, /* SD_3V3: on */
-+#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \
-+      defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
-+	[PCF50606_REG_D2REGC1]	= 0x10, /* GL_2V5: off */
-+#endif
-+
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+	[PCF50606_REG_D3REGC1]	= 0x18, /* CODEC_3V3: off */
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+	[PCF50606_REG_D3REGC1]	= 0x13, /* VTXCO_2V8: off */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+	[PCF50606_REG_D3REGC1]	= 0x00, /* USER1: off */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+	[PCF50606_REG_D3REGC1]	= 0xec, /* STBY_1V8: 2.1V */
-+#endif
-+
-+	[PCF50606_REG_LPREGC1]	= 0xf8, /* LCM_3V3: on */
-+	[PCF50606_REG_LPREGC2]	= 0x00,
-+
-+	[PCF50606_REG_MBCC1]	= 0x01, /* CHGAPE */
-+	[PCF50606_REG_MBCC2]	= 0x00,	/* unlimited charging */
-+	[PCF50606_REG_MBCC3]	= 0x1a, /* 0.2*Ifast, 4.20V */
-+	[PCF50606_REG_BBCC]	= 0x1f, /* 400uA */
-+	[PCF50606_REG_ADCC1]	= 0x00,
-+	[PCF50606_REG_ADCC2]	= 0x00,
-+	/* gap */
-+#if defined(CONFIG_ARCH_GTA01B_v4)
-+	[PCF50606_REG_ACDC1]	= 0x86,	/* ACD thresh 1.6V, enabled */
-+#else
-+	[PCF50606_REG_ACDC1]	= 0x00,
-+#endif
-+	[PCF50606_REG_BVMC]	= PCF50606_BVMC_THRSHLD_3V3,
-+	[PCF50606_REG_PWMC1]	= 0x00,
-+	[PCF50606_REG_LEDC1]	= 0x00,
-+	[PCF50606_REG_LEDC2]	= 0x00,
-+	[PCF50606_REG_GPOC1]	= 0x00,
-+	[PCF50606_REG_GPOC2]	= 0x00,
-+	[PCF50606_REG_GPOC3]	= 0x00,
-+	[PCF50606_REG_GPOC4]	= 0x00,
-+	[PCF50606_REG_GPOC5]	= 0x00,
-+};
-+
-+
-Index: u-boot/board/neo1973/gta01/split_by_variant.sh
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/split_by_variant.sh
-@@ -0,0 +1,57 @@
-+#!/bin/sh
-+# ---------------------------------------------------------
-+#  Set the core module defines according to Core Module
-+# ---------------------------------------------------------
-+# ---------------------------------------------------------
-+# Set up the GTA01 type define
-+# ---------------------------------------------------------
-+
-+CFGINC=${obj}include/config.h
-+CFGTMP=${obj}board/neo1973/gta01/config.tmp
-+
-+mkdir -p ${obj}include
-+if [ "$1" == "" ]
-+then
-+	echo "$0:: No parameters - using GTA01Bv3 config"
-+	echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC
-+	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+else
-+	case "$1" in
-+	gta01v4_config)
-+	echo "#define CONFIG_ARCH_GTA01_v4" > $CFGINC
-+	echo "GTA01_BIG_RAM=n" > $CFGTMP
-+	;;
-+
-+	gta01v3_config)
-+	echo "#define CONFIG_ARCH_GTA01_v3" > $CFGINC
-+	echo "GTA01_BIG_RAM=n" > $CFGTMP
-+	;;
-+
-+	gta01bv2_config)
-+	echo "#define CONFIG_ARCH_GTA01B_v2" > $CFGINC
-+	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	;;
-+
-+	gta01bv3_config)
-+	echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC
-+	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	;;
-+
-+	gta01bv4_config)
-+	echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC
-+	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	;;
-+
-+	*)
-+	echo "$0:: Unrecognised config - using GTA01Bv4 config"
-+	echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC
-+	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	;;
-+
-+	esac
-+
-+fi
-+# ---------------------------------------------------------
-+# Complete the configuration
-+# ---------------------------------------------------------
-+$MKCONFIG -a neo1973_gta01 arm arm920t gta01 neo1973 s3c24x0
-Index: u-boot/board/neo1973/gta01/u-boot.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/u-boot.lds
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/arm920t/start.o	(.text)
-+	  cpu/arm920t/s3c24x0/nand_read.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- /dev/null
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -0,0 +1,265 @@
-+/*
-+ * (C) Copyright 2006 Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * Configuation settings for the FIC Neo1973 GTA01 Linux GSM phone
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#if defined(BUILD_FOR_RAM)
-+/* If we want to start u-boot from inside RAM */
-+#define CONFIG_SKIP_RELOCATE_UBOOT	1
-+#define CONFIG_SKIP_LOWLEVEL_INIT	1
-+#else
-+/* we want to start u-boot directly from within NAND flash */
-+#define CONFIG_S3C2410_NAND_BOOT	1
-+#define CONFIG_S3C2410_NAND_SKIP_BAD	1
-+#endif
-+
-+#define CFG_UBOOT_SIZE		0x40000 /* size of u-boot, for NAND loading */
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_S3C2410		1	/* in a SAMSUNG S3C2410 SoC     */
-+#define CONFIG_SMDK2410		1	/* on a SAMSUNG SMDK2410 Board  */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ	12000000/* the GTA01 has 12MHz input clock */
-+
-+
-+#define USE_920T_MMU		1
-+#define CONFIG_USE_IRQ		1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1          1	/* we use SERIAL 1 on GTA01 */
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define	CONFIG_RTC_S3C24X0	1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE		115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS (\
-+			CFG_CMD_BDI	 | \
-+			CFG_CMD_LOADS	 | \
-+			CFG_CMD_LAODB	 | \
-+			CFG_CMD_IMI	 | \
-+			CFG_CMD_CACHE	 | \
-+			CFG_CMD_MEMORY	 | \
-+			CFG_CMD_ENV	 | \
-+			/* CFG_CMD_IRQ	 | */  \
-+			CFG_CMD_BOOTD	 | \
-+			CFG_CMD_CONSOLE	 | \
-+			CFG_CMD_ASKENV	 | \
-+			CFG_CMD_RUN	 | \
-+			CFG_CMD_ECHO	 | \
-+			CFG_CMD_I2C	 | \
-+			CFG_CMD_REGINFO	 | \
-+			CFG_CMD_IMMAP	 | \
-+			CFG_CMD_DATE	 | \
-+			CFG_CMD_AUTOSCRIPT | \
-+			CFG_CMD_BSP	 | \
-+			CFG_CMD_ELF	 | \
-+			CFG_CMD_MISC	 | \
-+			/* CFG_CMD_USB	 | */ \
-+			/* CFG_CMD_JFFS2	 | */ \
-+			CFG_CMD_DIAG	 | \
-+			/* CFG_CMD_HWFLOW	 | */ \
-+			CFG_CMD_SAVES	 | \
-+			CFG_CMD_NAND	 | \
-+			CFG_CMD_PORTIO	 | \
-+			CFG_CMD_MMC	 | \
-+			CFG_CMD_FAT	 | \
-+			CFG_CMD_EXT2	 | \
-+			0)
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY	3
-+#define CONFIG_BOOTARGS    	"rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
-+#define CONFIG_BOOTCOMMAND	"nand read.e 0x32000000 0x34000 0x200000; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION	1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define	CFG_LONGHELP				/* undef to save memory		*/
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+#define	CFG_PROMPT		"GTA01v3 # "	/* Monitor Command Prompt	*/
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+#define	CFG_PROMPT		"GTA01v4 # "	/* Monitor Command Prompt	*/
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+#define	CFG_PROMPT		"GTA01Bv2 # "	/* Monitor Command Prompt	*/
-+#elif defined(CONFIG_ARCH_GTA01B_v3)
-+#define	CFG_PROMPT		"GTA01Bv3 # "	/* Monitor Command Prompt	*/
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+#define	CFG_PROMPT		"GTA01Bv4 # "	/* Monitor Command Prompt	*/
-+#endif
-+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define	CFG_MAXARGS		16		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+
-+#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
-+
-+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define	CFG_LOAD_ADDR		0x33000000	/* default load address	*/
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define	CFG_HZ			1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+#if 0
-+#define CONFIG_USB_OHCI		1
-+#endif
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-+      defined(CONFIG_ARCH_GTA01B_v4)
-+#define PHYS_SDRAM_1_SIZE	0x08000000 /* 128 MB */
-+#else
-+#error Please define GTA01 variant
-+#endif
-+#define PHYS_SDRAM_RES_SIZE	0x00200000 /* 2 MB for frame buffer */
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+/* No NOR flash in this device */
-+#define CFG_NO_FLASH		1
-+
-+#define	CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_SIZE		0x4000		/* 16k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET_OOB    1               /* Location of ENV stored in block 0 OOB */
-+
-+#define NAND_MAX_CHIPS		1
-+#define CFG_NAND_BASE		0x4e000000
-+#define CFG_MAX_NAND_DEVICE	1
-+
-+#define CONFIG_MMC		1
-+#define CFG_MMC_BASE		0xff000000
-+
-+/* EXT2 driver */
-+#define CONFIG_EXT2		1
-+
-+#define CONFIG_FAT		1
-+#define CONFIG_SUPPORT_VFAT
-+
-+#if 0
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_CMDLINE	1
-+#define CONFIG_JFFS2_NAND	1
-+#define CONFIG_JFFS2_NAND_DEV	0
-+#define CONFIG_JFFS2_NAND_OFF	0x634000
-+#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
-+#endif
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_CMDLINE_TAG		1
-+#define CONFIG_REVISION_TAG		1
-+#if 0
-+#define CONFIG_SERIAL_TAG		1
-+#endif
-+
-+#define CONFIG_DRIVER_S3C24X0_I2C	1
-+#define CONFIG_HARD_I2C			1
-+#define CFG_I2C_SPEED			400000	/* 400kHz according to PCF50606 data sheet */
-+#define CFG_I2C_SLAVE			0x7f
-+
-+/* we have a board_late_init() function */
-+#define BOARD_LATE_INIT			1
-+
-+#if 1
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+
-+#define VIDEO_KBD_INIT_FCT	0
-+#define VIDEO_TSTC_FCT		serial_tstc
-+#define VIDEO_GETC_FCT		serial_getc
-+
-+#define LCD_VIDEO_ADDR		0x33d00000
-+#endif
-+
-+#define CONFIG_S3C2410_NAND_BBT                1
-+#define CONFIG_S3C2410_NAND_HWECC              1
-+
-+#define CONFIG_DRIVER_PCF50606		1
-+
-+#endif	/* __CONFIG_H */
-Index: u-boot/board/neo1973/common/neo1973.h
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/neo1973.h
-@@ -0,0 +1,32 @@
-+#ifndef _NEO1973_H
-+#define _NEO1973_H
-+
-+enum wakeup_reason {
-+	NEO1973_WAKEUP_NONE,
-+	NEO1973_WAKEUP_RESET,
-+	NEO1973_WAKEUP_POWER_KEY,
-+	NEO1973_WAKEUP_CHARGER,
-+	NEO1973_WAKEUP_ALARM,
-+};
-+
-+enum neo1973_charger_cmd {
-+	NEO1973_CHGCMD_NONE,
-+	NEO1973_CHGCMD_AUTOFAST,
-+	NEO1973_CHGCMD_NO_AUTOFAST,
-+	NEO1973_CHGCMD_OFF,
-+	NEO1973_CHGCMD_FAST,
-+	NEO1973_CHGCMD_FASTER,
-+};
-+
-+extern unsigned int neo1973_wakeup_cause;
-+
-+void neo1973_poweroff(void);
-+void neo1973_backlight(int on);
-+void neo1973_vibrator(int on);
-+
-+int neo1973_911_key_pressed(void);
-+
-+const char *neo1973_get_charge_status(void);
-+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd);
-+
-+#endif
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch
deleted file mode 100644
index feedd8bb39..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-20061030-qt2410.patch
+++ /dev/null
@@ -1,1233 +0,0 @@
-This patch adds 'board' support for the Armzone QT2410
-development board to u-boot.
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/Makefile
-===================================================================
---- u-boot.orig/Makefile
-+++ u-boot/Makefile
-@@ -2009,6 +2009,9 @@
- sbc2410x_config: unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
- 
-+qt2410_config	:	unconfig
-+	@./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
-+
- scb9328_config	:	unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
- 
-Index: u-boot/board/qt2410/Makefile
-===================================================================
---- /dev/null
-+++ u-boot/board/qt2410/Makefile
-@@ -0,0 +1,47 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= lib$(BOARD).a
-+
-+OBJS	:= qt2410.o flash.o
-+SOBJS	:= lowlevel_init.o
-+
-+$(LIB):	$(OBJS) $(SOBJS)
-+	$(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-Index: u-boot/board/qt2410/config.mk
-===================================================================
---- /dev/null
-+++ u-boot/board/qt2410/config.mk
-@@ -0,0 +1,29 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+#
-+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+CONFIG_USB_DFU_VENDOR=0x1457
-+CONFIG_USB_DFU_PRODUCT=0x511d
-+CONFIG_USB_DFU_REVISION=0x0100
-+
-+#
-+# SMDK2410 has 1 bank of 64 MB DRAM
-+#
-+# 3000'0000 to 3400'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# we load ourself to 33F8'0000
-+#
-+# download area is 3300'0000
-+#
-+
-+
-+TEXT_BASE = 0x33F80000
-Index: u-boot/board/qt2410/flash.c
-===================================================================
---- /dev/null
-+++ u-boot/board/qt2410/flash.c
-@@ -0,0 +1,435 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Alex Zuepke <azu@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+ulong myflush (void);
-+
-+
-+#define FLASH_BANK_SIZE	PHYS_FLASH_SIZE
-+#define MAIN_SECT_SIZE  0x10000	/* 64 KB */
-+
-+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-+
-+
-+#define CMD_READ_ARRAY		0x000000F0
-+#define CMD_UNLOCK1		0x000000AA
-+#define CMD_UNLOCK2		0x00000055
-+#define CMD_ERASE_SETUP		0x00000080
-+#define CMD_ERASE_CONFIRM	0x00000030
-+#define CMD_PROGRAM		0x000000A0
-+#define CMD_UNLOCK_BYPASS	0x00000020
-+
-+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
-+
-+#define BIT_ERASE_DONE		0x00000080
-+#define BIT_RDY_MASK		0x00000080
-+#define BIT_PROGRAM_ERROR	0x00000020
-+#define BIT_TIMEOUT		0x80000000	/* our flag */
-+
-+#define READY 1
-+#define ERR   2
-+#define TMO   4
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+ulong flash_init (void)
-+{
-+	int i, j;
-+	ulong size = 0;
-+
-+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-+		ulong flashbase = 0;
-+
-+		flash_info[i].flash_id =
-+#if defined(CONFIG_AMD_LV400)
-+			(AMD_MANUFACT & FLASH_VENDMASK) |
-+			(AMD_ID_LV400B & FLASH_TYPEMASK);
-+#elif defined(CONFIG_AMD_LV800)
-+			(AMD_MANUFACT & FLASH_VENDMASK) |
-+			(AMD_ID_LV800B & FLASH_TYPEMASK);
-+#else
-+#error "Unknown flash configured"
-+#endif
-+			flash_info[i].size = FLASH_BANK_SIZE;
-+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-+		if (i == 0)
-+			flashbase = PHYS_FLASH_1;
-+		else
-+			panic ("configured too many flash banks!\n");
-+		for (j = 0; j < flash_info[i].sector_count; j++) {
-+			if (j <= 3) {
-+				/* 1st one is 16 KB */
-+				if (j == 0) {
-+					flash_info[i].start[j] =
-+						flashbase + 0;
-+				}
-+
-+				/* 2nd and 3rd are both 8 KB */
-+				if ((j == 1) || (j == 2)) {
-+					flash_info[i].start[j] =
-+						flashbase + 0x4000 + (j -
-+								      1) *
-+						0x2000;
-+				}
-+
-+				/* 4th 32 KB */
-+				if (j == 3) {
-+					flash_info[i].start[j] =
-+						flashbase + 0x8000;
-+				}
-+			} else {
-+				flash_info[i].start[j] =
-+					flashbase + (j - 3) * MAIN_SECT_SIZE;
-+			}
-+		}
-+		size += flash_info[i].size;
-+	}
-+
-+	flash_protect (FLAG_PROTECT_SET,
-+		       CFG_FLASH_BASE,
-+		       CFG_FLASH_BASE + monitor_flash_len - 1,
-+		       &flash_info[0]);
-+
-+#if 0
-+	flash_protect (FLAG_PROTECT_SET,
-+		       CFG_ENV_ADDR,
-+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
-+#endif
-+
-+	return size;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+void flash_print_info (flash_info_t * info)
-+{
-+	int i;
-+
-+	switch (info->flash_id & FLASH_VENDMASK) {
-+	case (AMD_MANUFACT & FLASH_VENDMASK):
-+		printf ("AMD: ");
-+		break;
-+	default:
-+		printf ("Unknown Vendor ");
-+		break;
-+	}
-+
-+	switch (info->flash_id & FLASH_TYPEMASK) {
-+	case (AMD_ID_LV400B & FLASH_TYPEMASK):
-+		printf ("1x Amd29LV400BB (4Mbit)\n");
-+		break;
-+	case (AMD_ID_LV800B & FLASH_TYPEMASK):
-+		printf ("1x Amd29LV800BB (8Mbit)\n");
-+		break;
-+	default:
-+		printf ("Unknown Chip Type\n");
-+		goto Done;
-+		break;
-+	}
-+
-+	printf ("  Size: %ld MB in %d Sectors\n",
-+		info->size >> 20, info->sector_count);
-+
-+	printf ("  Sector Start Addresses:");
-+	for (i = 0; i < info->sector_count; i++) {
-+		if ((i % 5) == 0) {
-+			printf ("\n   ");
-+		}
-+		printf (" %08lX%s", info->start[i],
-+			info->protect[i] ? " (RO)" : "     ");
-+	}
-+	printf ("\n");
-+
-+      Done:;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+int flash_erase (flash_info_t * info, int s_first, int s_last)
-+{
-+	ushort result;
-+	int iflag, cflag, prot, sect;
-+	int rc = ERR_OK;
-+	int chip;
-+
-+	/* first look for protection bits */
-+
-+	if (info->flash_id == FLASH_UNKNOWN)
-+		return ERR_UNKNOWN_FLASH_TYPE;
-+
-+	if ((s_first < 0) || (s_first > s_last)) {
-+		return ERR_INVAL;
-+	}
-+
-+	if ((info->flash_id & FLASH_VENDMASK) !=
-+	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-+		return ERR_UNKNOWN_FLASH_VENDOR;
-+	}
-+
-+	prot = 0;
-+	for (sect = s_first; sect <= s_last; ++sect) {
-+		if (info->protect[sect]) {
-+			prot++;
-+		}
-+	}
-+	if (prot)
-+		return ERR_PROTECTED;
-+
-+	/*
-+	 * Disable interrupts which might cause a timeout
-+	 * here. Remember that our exception vectors are
-+	 * at address 0 in the flash, and we don't want a
-+	 * (ticker) exception to happen while the flash
-+	 * chip is in programming mode.
-+	 */
-+	cflag = icache_status ();
-+	icache_disable ();
-+	iflag = disable_interrupts ();
-+
-+	/* Start erase on unprotected sectors */
-+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-+		printf ("Erasing sector %2d ... ", sect);
-+
-+		/* arm simple, non interrupt dependent timer */
-+		reset_timer_masked ();
-+
-+		if (info->protect[sect] == 0) {	/* not protected */
-+			vu_short *addr = (vu_short *) (info->start[sect]);
-+
-+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-+
-+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+			*addr = CMD_ERASE_CONFIRM;
-+
-+			/* wait until flash is ready */
-+			chip = 0;
-+
-+			do {
-+				result = *addr;
-+
-+				/* check timeout */
-+				if (get_timer_masked () >
-+				    CFG_FLASH_ERASE_TOUT) {
-+					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+					chip = TMO;
-+					break;
-+				}
-+
-+				if (!chip
-+				    && (result & 0xFFFF) & BIT_ERASE_DONE)
-+					chip = READY;
-+
-+				if (!chip
-+				    && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
-+					chip = ERR;
-+
-+			} while (!chip);
-+
-+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+
-+			if (chip == ERR) {
-+				rc = ERR_PROG_ERROR;
-+				goto outahere;
-+			}
-+			if (chip == TMO) {
-+				rc = ERR_TIMOUT;
-+				goto outahere;
-+			}
-+
-+			printf ("ok.\n");
-+		} else {	/* it was protected */
-+
-+			printf ("protected!\n");
-+		}
-+	}
-+
-+	if (ctrlc ())
-+		printf ("User Interrupt!\n");
-+
-+      outahere:
-+	/* allow flash to settle - wait 10 ms */
-+	udelay_masked (10000);
-+
-+	if (iflag)
-+		enable_interrupts ();
-+
-+	if (cflag)
-+		icache_enable ();
-+
-+	return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash
-+ */
-+
-+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
-+{
-+	vu_short *addr = (vu_short *) dest;
-+	ushort result;
-+	int rc = ERR_OK;
-+	int cflag, iflag;
-+	int chip;
-+
-+	/*
-+	 * Check if Flash is (sufficiently) erased
-+	 */
-+	result = *addr;
-+	if ((result & data) != data)
-+		return ERR_NOT_ERASED;
-+
-+
-+	/*
-+	 * Disable interrupts which might cause a timeout
-+	 * here. Remember that our exception vectors are
-+	 * at address 0 in the flash, and we don't want a
-+	 * (ticker) exception to happen while the flash
-+	 * chip is in programming mode.
-+	 */
-+	cflag = icache_status ();
-+	icache_disable ();
-+	iflag = disable_interrupts ();
-+
-+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+	MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
-+	*addr = CMD_PROGRAM;
-+	*addr = data;
-+
-+	/* arm simple, non interrupt dependent timer */
-+	reset_timer_masked ();
-+
-+	/* wait until flash is ready */
-+	chip = 0;
-+	do {
-+		result = *addr;
-+
-+		/* check timeout */
-+		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
-+			chip = ERR | TMO;
-+			break;
-+		}
-+		if (!chip && ((result & 0x80) == (data & 0x80)))
-+			chip = READY;
-+
-+		if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
-+			result = *addr;
-+
-+			if ((result & 0x80) == (data & 0x80))
-+				chip = READY;
-+			else
-+				chip = ERR;
-+		}
-+
-+	} while (!chip);
-+
-+	*addr = CMD_READ_ARRAY;
-+
-+	if (chip == ERR || *addr != data)
-+		rc = ERR_PROG_ERROR;
-+
-+	if (iflag)
-+		enable_interrupts ();
-+
-+	if (cflag)
-+		icache_enable ();
-+
-+	return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash.
-+ */
-+
-+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-+{
-+	ulong cp, wp;
-+	int l;
-+	int i, rc;
-+	ushort data;
-+
-+	wp = (addr & ~1);	/* get lower word aligned address */
-+
-+	/*
-+	 * handle unaligned start bytes
-+	 */
-+	if ((l = addr - wp) != 0) {
-+		data = 0;
-+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-+			data = (data >> 8) | (*(uchar *) cp << 8);
-+		}
-+		for (; i < 2 && cnt > 0; ++i) {
-+			data = (data >> 8) | (*src++ << 8);
-+			--cnt;
-+			++cp;
-+		}
-+		for (; cnt == 0 && i < 2; ++i, ++cp) {
-+			data = (data >> 8) | (*(uchar *) cp << 8);
-+		}
-+
-+		if ((rc = write_hword (info, wp, data)) != 0) {
-+			return (rc);
-+		}
-+		wp += 2;
-+	}
-+
-+	/*
-+	 * handle word aligned part
-+	 */
-+	while (cnt >= 2) {
-+		data = *((vu_short *) src);
-+		if ((rc = write_hword (info, wp, data)) != 0) {
-+			return (rc);
-+		}
-+		src += 2;
-+		wp += 2;
-+		cnt -= 2;
-+	}
-+
-+	if (cnt == 0) {
-+		return ERR_OK;
-+	}
-+
-+	/*
-+	 * handle unaligned tail bytes
-+	 */
-+	data = 0;
-+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-+		data = (data >> 8) | (*src++ << 8);
-+		--cnt;
-+	}
-+	for (; i < 2; ++i, ++cp) {
-+		data = (data >> 8) | (*(uchar *) cp << 8);
-+	}
-+
-+	return write_hword (info, wp, data);
-+}
-Index: u-boot/board/qt2410/lowlevel_init.S
-===================================================================
---- /dev/null
-+++ u-boot/board/qt2410/lowlevel_init.S
-@@ -0,0 +1,171 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
-+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
-+ *
-+ * Modified for the Samsung SMDK2410 by
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE  <hitchcar@sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON	0x48000000
-+
-+/* BWSCON */
-+#define DW8		 	(0x0)
-+#define DW16		 	(0x1)
-+#define DW32		 	(0x2)
-+#define WAIT		 	(0x1<<2)
-+#define UBLB		 	(0x1<<3)
-+
-+#define B1_BWSCON	  	(DW32)
-+#define B2_BWSCON	  	(DW16)
-+#define B3_BWSCON	  	(DW16 + WAIT + UBLB)
-+#define B4_BWSCON	  	(DW16)
-+#define B5_BWSCON	  	(DW16)
-+#define B6_BWSCON	  	(DW32)
-+#define B7_BWSCON	  	(DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs		 	0x0	/*  0clk */
-+#define B0_Tcos		 	0x0	/*  0clk */
-+#define B0_Tacc		 	0x7	/* 14clk */
-+#define B0_Tcoh		 	0x0	/*  0clk */
-+#define B0_Tah		 	0x0	/*  0clk */
-+#define B0_Tacp		 	0x0
-+#define B0_PMC		 	0x0	/* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs		 	0x0	/*  0clk */
-+#define B1_Tcos		 	0x0	/*  0clk */
-+#define B1_Tacc		 	0x7	/* 14clk */
-+#define B1_Tcoh		 	0x0	/*  0clk */
-+#define B1_Tah		 	0x0	/*  0clk */
-+#define B1_Tacp		 	0x0
-+#define B1_PMC		 	0x0
-+
-+#define B2_Tacs		 	0x0
-+#define B2_Tcos		 	0x0
-+#define B2_Tacc		 	0x7
-+#define B2_Tcoh		 	0x0
-+#define B2_Tah		 	0x0
-+#define B2_Tacp		 	0x0
-+#define B2_PMC		 	0x0
-+
-+#define B3_Tacs		 	0x0	/*  0clk */
-+#define B3_Tcos		 	0x3	/*  4clk */
-+#define B3_Tacc		 	0x7	/* 14clk */
-+#define B3_Tcoh		 	0x1	/*  1clk */
-+#define B3_Tah		 	0x0	/*  0clk */
-+#define B3_Tacp		 	0x3     /*  6clk */
-+#define B3_PMC		 	0x0	/* normal */
-+
-+#define B4_Tacs		 	0x0	/*  0clk */
-+#define B4_Tcos		 	0x0	/*  0clk */
-+#define B4_Tacc		 	0x7	/* 14clk */
-+#define B4_Tcoh		 	0x0	/*  0clk */
-+#define B4_Tah		 	0x0	/*  0clk */
-+#define B4_Tacp		 	0x0
-+#define B4_PMC		 	0x0	/* normal */
-+
-+#define B5_Tacs		 	0x0	/*  0clk */
-+#define B5_Tcos		 	0x0	/*  0clk */
-+#define B5_Tacc		 	0x7	/* 14clk */
-+#define B5_Tcoh		 	0x0	/*  0clk */
-+#define B5_Tah		 	0x0	/*  0clk */
-+#define B5_Tacp		 	0x0
-+#define B5_PMC		 	0x0	/* normal */
-+
-+#define B6_MT		 	0x3	/* SDRAM */
-+#define B6_Trcd	 	 	0x1
-+#define B6_SCAN		 	0x1	/* 9bit */
-+
-+#define B7_MT		 	0x3	/* SDRAM */
-+#define B7_Trcd		 	0x1	/* 3clk */
-+#define B7_SCAN		 	0x1	/* 9bit */
-+
-+/* REFRESH parameter */
-+#define REFEN		 	0x1	/* Refresh enable */
-+#define TREFMD		 	0x0	/* CBR(CAS before RAS)/Auto refresh */
-+#define Trp		 	0x1	/* 3clk */
-+#define Trc		 	0x3	/* 7clk */
-+#define Tchr		 	0x2	/* 3clk */
-+//#define REFCNT		 	1113	/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+#define REFCNT		 	997	/* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+	.word	TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+	/* memory control configuration */
-+	/* make r0 relative the current location so that it */
-+	/* reads SMRDATA out of FLASH rather than memory ! */
-+	adr	r0, SMRDATA
-+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
-+	add     r2, r0, #13*4
-+0:
-+	ldr     r3, [r0], #4
-+	str     r3, [r1], #4
-+	cmp     r2, r0
-+	bne     0b
-+
-+	/* setup asynchronous bus mode */
-+	mrc	p15, 0, r1 ,c1 ,c0, 0
-+	orr	r1, r1, #0xc0000000
-+	mcr	p15, 0, r1, c1, c0, 0
-+
-+	/* everything is fine now */
-+	mov	pc, lr
-+
-+	.ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+    .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+    .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+    .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+    .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+    .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+    .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+    .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+    .word 0xb2
-+    .word 0x30
-+    .word 0x30
-Index: u-boot/board/qt2410/qt2410.c
-===================================================================
---- /dev/null
-+++ u-boot/board/qt2410/qt2410.c
-@@ -0,0 +1,152 @@
-+/*
-+ * (C) 2006 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on existing S3C2410 startup code in u-boot:
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <video_fb.h>
-+#include <usbdcore.h>
-+#include <s3c2410.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if 1
-+//#define M_MDIV	0xA1		/* Fout = 202.8MHz */
-+//#define M_PDIV	0x3
-+//#define M_SDIV	0x1
-+#define M_MDIV	0x90		/* Fout = 202.8MHz */
-+#define M_PDIV	0x7
-+#define M_SDIV	0x0
-+#else
-+#define M_MDIV	0x5c		/* Fout = 150.0MHz */
-+#define M_PDIV	0x4
-+#define M_SDIV	0x0
-+#endif
-+
-+#if 1
-+#define U_M_MDIV	0x78
-+#define U_M_PDIV	0x2
-+#define U_M_SDIV	0x3
-+#else
-+#define U_M_MDIV	0x48
-+#define U_M_PDIV	0x3
-+#define U_M_SDIV	0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+	__asm__ volatile ("1:\n"
-+	  "subs %0, %1, #1\n"
-+	  "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	/* to reduce PLL lock time, adjust the LOCKTIME register */
-+	clk_power->LOCKTIME = 0xFFFFFF;
-+
-+	/* configure MPLL */
-+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (4000);
-+
-+	/* configure UPLL */
-+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (8000);
-+
-+	/* set up the I/O ports */
-+	gpio->GPACON = 0x007FFFFF;
-+	gpio->GPBCON = 0x00044555;
-+	gpio->GPBUP = 0x000007FF;
-+	gpio->GPCCON = 0xAAAAAAAA;
-+	gpio->GPCUP = 0x0000FFFF;
-+	gpio->GPDCON = 0xAAAAAAAA;
-+	gpio->GPDUP = 0x0000FFFF;
-+	gpio->GPECON = 0xAAAAAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+	gpio->GPFCON = 0x000055AA;
-+	gpio->GPFUP = 0x000000FF;
-+	gpio->GPGCON = 0xFF95FFBA;
-+	//gpio->GPGUP = 0x0000FFFF;
-+	gpio->GPGUP = 0x0000AFEF;
-+	gpio->GPHCON = 0x0028FAAA;
-+	gpio->GPHUP = 0x000007FF;
-+
-+	/* arch number of SMDK2410-Board */
-+	gd->bd->bi_arch_number = MACH_TYPE_QT2410;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0x30000100;
-+
-+	icache_enable();
-+	dcache_enable();
-+
-+	return 0;
-+}
-+
-+#if defined(CONFIG_USB_DEVICE)
-+void udc_ctrl(enum usbd_event event, int param)
-+{
-+}
-+#endif
-+
-+void board_video_init(GraphicDevice *pGD)
-+{
-+	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-+
-+	/* FIXME: select LCM type by env variable */
-+
-+	/* Configuration for GTA01 LCM on QT2410 */
-+	lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */
-+
-+	lcd->LCDCON2 = 0x019fc3c1;
-+	lcd->LCDCON3 = 0x0039df67;
-+	lcd->LCDCON4 = 0x00000007;
-+	lcd->LCDCON5 = 0x0001cf09;
-+	lcd->LPCSEL  = 0x00000000;
-+}
-+
-+int dram_init (void)
-+{
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+	return 0;
-+}
-Index: u-boot/board/qt2410/u-boot.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/qt2410/u-boot.lds
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/arm920t/start.o	(.text)
-+	  cpu/arm920t/s3c24x0/nand_read.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/include/configs/qt2410.h
-===================================================================
---- /dev/null
-+++ u-boot/include/configs/qt2410.h
-@@ -0,0 +1,287 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ * Gary Jennejohn <gj@denx.de>
-+ * David Mueller <d.mueller@elsoft.ch>
-+ *
-+ * Configuation settings for the Armzone QT2410 board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#if 0
-+/* If we want to start u-boot from usb bootloader in NOR flash */
-+#define CONFIG_SKIP_RELOCATE_UBOOT	1
-+#define	CONFIG_SKIP_LOWLEVEL_INIT	1
-+#else
-+/* If we want to start u-boot directly from within NAND flash */
-+#define CONFIG_S3C2410_NAND_BOOT	1
-+#define CONFIG_S3C2410_NAND_SKIP_BAD	1
-+#endif
-+
-+#define CFG_UBOOT_SIZE            0x40000
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_S3C2410		1	/* in a SAMSUNG S3C2410 SoC     */
-+#define CONFIG_SMDK2410		1	/* on a SAMSUNG SMDK2410 Board  */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ	12000000/* the SMDK2410 has 12MHz input clock */
-+
-+
-+#define USE_920T_MMU		1
-+#define CONFIG_USE_IRQ		1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 400*1024)
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+#if 0
-+#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
-+#define CS8900_BASE		0x19000300
-+#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
-+#endif
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1          1	/* we use SERIAL 1 on SMDK2410 */
-+#define CONFIG_HWFLOW		1
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define	CONFIG_RTC_S3C24X0	1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE		115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS (\
-+			CFG_CMD_BDI	 | \
-+			CFG_CMD_LOADS	 | \
-+			CFG_CMD_LOADB	 | \
-+			CFG_CMD_IMI	 | \
-+			CFG_CMD_CACHE	 | \
-+			CFG_CMD_MEMORY	 | \
-+			CFG_CMD_ENV	 | \
-+			/* CFG_CMD_IRQ	 | */ \
-+			CFG_CMD_BOOTD	 | \
-+			CFG_CMD_CONSOLE	 | \
-+			CFG_CMD_BMP	 | \
-+			CFG_CMD_ASKENV	 | \
-+			CFG_CMD_RUN	 | \
-+			CFG_CMD_ECHO 	 | \
-+			CFG_CMD_I2C 	 | \
-+			CFG_CMD_REGINFO	 | \
-+			CFG_CMD_IMMAP	 | \
-+			CFG_CMD_DATE	 | \
-+			CFG_CMD_AUTOSCRIPT | \
-+			CFG_CMD_BSP	 | \
-+			CFG_CMD_ELF	 | \
-+			CFG_CMD_MISC	 | \
-+			/* CFG_CMD_USB	 | */ \
-+			CFG_CMD_JFFS2	 | \
-+			CFG_CMD_DIAG	 | \
-+			CFG_CMD_HWFLOW	 | \
-+			CFG_CMD_SAVES	 | \
-+			CFG_CMD_NAND	 | \
-+			CFG_CMD_PORTIO	 | \
-+			CFG_CMD_MMC	 | \
-+			CFG_CMD_FAT	 | \
-+			CFG_CMD_EXT2	 | \
-+			0)
-+
-+#if 0
-+			CFG_CMD_DHCP	 | \
-+			CFG_CMD_PING	 | \
-+			CFG_CMD_NET	 | \
-+
-+#endif
-+
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY	3
-+#define CONFIG_BOOTARGS    	"rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
-+#define CONFIG_ETHADDR		01:ab:cd:ef:fe:dc
-+#define CONFIG_NETMASK          255.255.255.0
-+#define CONFIG_IPADDR		10.0.0.110
-+#define CONFIG_SERVERIP		10.0.0.1
-+/*#define CONFIG_BOOTFILE	"elinos-lart" */
-+#define CONFIG_BOOTCOMMAND	"nand load 0x32000000 0x34000 0x200000; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION	1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define	CFG_LONGHELP				/* undef to save memory		*/
-+#define	CFG_PROMPT		"QT2410 # "	/* Monitor Command Prompt	*/
-+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define	CFG_MAXARGS		64		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+
-+#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
-+
-+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define	CFG_LOAD_ADDR		0x33000000	/* default load address	*/
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define	CFG_HZ			1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+#define CONFIG_USB_OHCI		1
-+
-+#define CONFIG_USB_DEVICE	1
-+#define CONFIG_USB_TTY		1
-+#define CFG_CONSOLE_IS_IN_ENV	1
-+#define CONFIG_USBD_VENDORID		0x1457     /* Linux/NetChip */
-+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x5120    /* gserial */
-+#define CONFIG_USBD_PRODUCTID_CDCACM	0x511d    /* CDC ACM */
-+#define CONFIG_USBD_MANUFACTURER	"Armzone"
-+#define CONFIG_USBD_PRODUCT_NAME	"QT2410 Bootloader " U_BOOT_VERSION
-+#define CONFIG_EXTRA_ENV_SETTINGS	"usbtty=cdc_acm\0"
-+#define CONFIG_USBD_DFU			1
-+#define CONFIG_USBD_DFU_XFER_SIZE	0x4000
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_RES_SIZE	0x00200000 /* 2 MB for frame buffer */
-+
-+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-+
-+#define CFG_FLASH_BASE		PHYS_FLASH_1
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+#define CONFIG_AMD_LV400	1	/* uncomment this if you have a LV400 flash */
-+
-+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-+#define PHYS_FLASH_SIZE		0x00080000 /* 512KB */
-+#define CFG_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
-+
-+/* timeout values are in ticks */
-+#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-+#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
-+
-+#define	CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_SIZE		0x4000		/* 16k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET_OOB	1		/* Location of ENV stored in block 0 OOB */
-+
-+#define NAND_MAX_CHIPS		1
-+#define CFG_NAND_BASE		0x4e000000
-+#define CFG_MAX_NAND_DEVICE	1
-+
-+#define CONFIG_MMC		1
-+#define CFG_MMC_BASE		0xff000000
-+
-+#define CONFIG_EXT2		1
-+
-+/* FAT driver in u-boot is broken currently */
-+#define CONFIG_FAT		1
-+#define CONFIG_SUPPORT_VFAT
-+
-+#if 1
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_CMDLINE	1
-+#define CONFIG_JFFS2_NAND	1
-+#define CONFIG_JFFS2_NAND_DEV	0
-+//#define CONFIG_JFFS2_NAND_OFF		0x634000
-+//#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
-+#endif
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_CMDLINE_TAG		1
-+
-+#define CONFIG_DRIVER_S3C24X0_I2C	1
-+#define CONFIG_HARD_I2C			1
-+#define CFG_I2C_SPEED			400000  /* 400kHz according to PCF50606 data sheet */
-+#define CFG_I2C_SLAVE			0x7f
-+
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_SPLASH_SCREEN
-+#define CFG_VIDEO_LOGO_MAX_SIZE		(640*480+1024+100) /* 100 = slack */
-+#define CONFIG_VIDEO_BMP_GZIP
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+#define CONFIG_UNZIP
-+
-+#define VIDEO_KBD_INIT_FCT     0
-+#define VIDEO_TSTC_FCT         serial_tstc
-+#define VIDEO_GETC_FCT         serial_getc
-+
-+#define LCD_VIDEO_ADDR         0x33d00000
-+
-+#define CONFIG_S3C2410_NAND_BBT	1
-+
-+#define MTDIDS_DEFAULT		"nand0=qt2410-nand"
-+#define MTPARTS_DEFAULT		"qt2410-nand:192k(u-boot),8k(u-boot_env),2M(kernel),2M(splash),-(jffs2)"
-+
-+#endif	/* __CONFIG_H */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-arm920_s3c2410_irq_demux.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-arm920_s3c2410_irq_demux.patch
deleted file mode 100644
index b39a268c84..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-arm920_s3c2410_irq_demux.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
-plus a stub implementation of it for the S3C2410.
-
-Index: u-boot.git/cpu/arm920t/interrupts.c
-===================================================================
---- u-boot.git.orig/cpu/arm920t/interrupts.c	2007-02-05 22:49:11.000000000 +0100
-+++ u-boot.git/cpu/arm920t/interrupts.c	2007-02-05 23:19:01.000000000 +0100
-@@ -161,11 +161,16 @@
- 
- void do_irq (struct pt_regs *pt_regs)
- {
--#if defined (CONFIG_USE_IRQ) && defined (CONFIG_ARCH_INTEGRATOR)
-+#if defined (CONFIG_USE_IRQ)
-+#if defined (ARM920_IRQ_CALLBACK)
-+	ARM920_IRQ_CALLBACK();
-+	return;
-+#elif defined (CONFIG_ARCH_INTEGRATOR)
- 	/* ASSUMED to be a timer interrupt  */
- 	/* Just clear it - count handled in */
- 	/* integratorap.c                   */
- 	*(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0;
-+#endif /* ARCH_INTEGRATOR */
- #else
- 	printf ("interrupt request\n");
- 	show_regs (pt_regs);
-Index: u-boot.git/cpu/arm920t/s3c24x0/interrupts.c
-===================================================================
---- u-boot.git.orig/cpu/arm920t/s3c24x0/interrupts.c	2007-02-05 22:49:11.000000000 +0100
-+++ u-boot.git/cpu/arm920t/s3c24x0/interrupts.c	2007-02-05 23:21:35.000000000 +0100
-@@ -216,4 +216,13 @@
- 	/*NOTREACHED*/
- }
- 
-+#ifdef CONFIG_USE_IRQ
-+void s3c2410_irq(void)
-+{
-+	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
-+	u_int32_t intpnd = irq->INTPND;
-+
-+}
-+#endif /* USE_IRQ */
-+
- #endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
-Index: u-boot.git/include/common.h
-===================================================================
---- u-boot.git.orig/include/common.h	2007-02-05 22:49:11.000000000 +0100
-+++ u-boot.git/include/common.h	2007-02-05 23:19:01.000000000 +0100
-@@ -452,6 +452,8 @@
- ulong	get_PCI_freq (void);
- #endif
- #if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X)
-+void	s3c2410_irq(void);
-+#define ARM920_IRQ_CALLBACK s3c2410_irq
- ulong	get_FCLK (void);
- ulong	get_HCLK (void);
- ulong	get_PCLK (void);
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-arm920t-gd_in_irq.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-arm920t-gd_in_irq.patch
deleted file mode 100644
index b3d7bc1166..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-arm920t-gd_in_irq.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-This patch allows us to use the 'gd' pointer (and thus environment
-and everything else associated with it) from interrupt context on
-arm920t.
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S	2007-02-24 02:35:38.000000000 +0100
-+++ u-boot/cpu/arm920t/start.S	2007-02-24 02:36:01.000000000 +0100
-@@ -474,12 +474,12 @@
- 	.macro	irq_save_user_regs
- 	sub	sp, sp, #S_FRAME_SIZE
- 	stmia	sp, {r0 - r12}			@ Calling r0-r12
--	add     r8, sp, #S_PC
--	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
--	str     lr, [r8, #0]                    @ Save calling PC
-+	add     r7, sp, #S_PC
-+	stmdb   r7, {sp, lr}^                   @ Calling SP, LR
-+	str     lr, [r7, #0]                    @ Save calling PC
- 	mrs     r6, spsr
--	str     r6, [r8, #4]                    @ Save CPSR
--	str     r0, [r8, #8]                    @ Save OLD_R0
-+	str     r6, [r7, #4]                    @ Save CPSR
-+	str     r0, [r7, #8]                    @ Save OLD_R0
- 	mov	r0, sp
- 	.endm
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-bbt-quiet.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-bbt-quiet.patch
deleted file mode 100644
index 9b1febe956..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-bbt-quiet.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-This patch makes the u-boot NAND BBT code a bit more quiet
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/drivers/nand/nand_bbt.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_bbt.c	2007-02-16 23:54:02.000000000 +0100
-+++ u-boot/drivers/nand/nand_bbt.c	2007-02-16 23:54:05.000000000 +0100
-@@ -157,10 +157,6 @@
- 					this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
- 					continue;
- 				}
--				/* Leave it for now, if its matured we can move this
--				 * message to MTD_DEBUG_LEVEL0 */
--				printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
--					((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
- 				/* Factory marked bad or worn out ? */
- 				if (tmp == 0)
- 					this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
-@@ -229,14 +225,12 @@
- 	if (td->options & NAND_BBT_VERSION) {
- 		nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
- 		td->version[0] = buf[mtd->oobblock + td->veroffs];
--		printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]);
- 	}
- 
- 	/* Read the mirror version, if available */
- 	if (md && (md->options & NAND_BBT_VERSION)) {
- 		nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
- 		md->version[0] = buf[mtd->oobblock + md->veroffs];
--		printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]);
- 	}
- 
- 	return 1;
-@@ -374,8 +368,6 @@
- 	for (i = 0; i < chips; i++) {
- 		if (td->pages[i] == -1)
- 			printk (KERN_WARNING "Bad block table not found for chip %d\n", i);
--		else
--			printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]);
- 	}
- 	return 0;
- }
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-cmd_s3c2410.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-cmd_s3c2410.patch
deleted file mode 100644
index 4e63908c67..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-cmd_s3c2410.patch
+++ /dev/null
@@ -1,175 +0,0 @@
-This patch adds a new 's3c2410' command which currently supports 's3c2410 speed
-{set,get,list} and thus allows dynamic change of the CPU clock.
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/cpu/arm920t/s3c24x0/Makefile
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/Makefile	2007-02-24 15:14:00.000000000 +0100
-+++ u-boot/cpu/arm920t/s3c24x0/Makefile	2007-02-24 15:21:02.000000000 +0100
-@@ -26,7 +26,7 @@
- LIB	= $(obj)lib$(SOC).a
- 
- COBJS	= i2c.o interrupts.o serial.o speed.o \
--	  usb_ohci.o nand_read.o nand.o
-+	  usb_ohci.o nand_read.o nand.o cmd_s3c2410.o
- 
- SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
- OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-Index: u-boot/cpu/arm920t/s3c24x0/cmd_s3c2410.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot/cpu/arm920t/s3c24x0/cmd_s3c2410.c	2007-02-24 15:22:17.000000000 +0100
-@@ -0,0 +1,152 @@
-+/*
-+ * (C) Copyright 2006 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Boot support
-+ */
-+#include <common.h>
-+#include <command.h>
-+#include <net.h>		/* for print_IPaddr */
-+#include <s3c2410.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_BDI)
-+
-+#define ARRAY_SIZE(x)           (sizeof(x) / sizeof((x)[0]))
-+#define MHZ	1000000
-+
-+static void print_cpu_speed(void)
-+{
-+	printf("FCLK = %u MHz, HCLK = %u MHz, PCLK = %u MHz\n",
-+		get_FCLK()/MHZ, get_HCLK()/MHZ, get_PCLK()/MHZ);
-+}
-+
-+struct s3c2410_pll_speed {
-+	u_int16_t	mhz;
-+	u_int32_t	mpllcon;
-+	u_int32_t	clkdivn;
-+};
-+
-+#define CLKDIVN_1_1_1	0x00
-+#define CLKDIVN_1_2_2	0x02
-+#define CLKDIVN_1_2_4	0x03
-+#define CLKDIVN_1_4_4	0x04
-+
-+static const struct s3c2410_pll_speed pll_configs[] = {
-+	{
-+		.mhz = 50,
-+		.mpllcon = ((0x5c << 12) + (0x4 << 4) + 0x2),
-+		.clkdivn = CLKDIVN_1_1_1,
-+	},
-+	{
-+		.mhz = 101,
-+		.mpllcon = ((0x7f << 12) + (0x2 << 4) + 0x2),
-+		.clkdivn = CLKDIVN_1_2_2,
-+	},
-+	{
-+		.mhz = 202,
-+		.mpllcon = ((0x90 << 12) + (0x7 << 4) + 0x0),
-+		.clkdivn = CLKDIVN_1_2_4,
-+	},
-+	{
-+		.mhz = 266,
-+		.mpllcon = ((0x7d << 12) + (0x1 << 4) + 0x1),
-+		.clkdivn = CLKDIVN_1_2_4,
-+	},
-+};
-+
-+static void list_cpu_speeds(void)
-+{
-+	int i;
-+	for (i = 0; i < ARRAY_SIZE(pll_configs); i++)
-+		printf("%u MHz\n", pll_configs[i].mhz);
-+}
-+
-+static int reconfig_mpll(u_int16_t mhz)
-+{
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(pll_configs); i++) {
-+		if (pll_configs[i].mhz == mhz) {
-+			/* to reduce PLL lock time, adjust the LOCKTIME register */
-+			clk_power->LOCKTIME = 0xFFFFFF;
-+
-+			/* configure MPLL */
-+			clk_power->MPLLCON = pll_configs[i].mpllcon;
-+			clk_power->UPLLCON = ((0x78 << 12) + (0x2 << 4) + 0x3),
-+			clk_power->CLKDIVN = pll_configs[i].clkdivn;
-+
-+			/* If we changed the speed, we need to re-configure
-+			 * the serial baud rate generator */
-+			serial_setbrg();
-+			return 0;
-+		}
-+	}
-+	return -1;
-+}
-+
-+int do_s3c2410 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	if (!strcmp(argv[1], "speed")) {
-+		if (argc < 2)
-+			goto out_help;
-+		if (!strcmp(argv[2], "get"))
-+			print_cpu_speed();
-+		else if (!strcmp(argv[2], "list"))
-+			list_cpu_speeds();
-+		else if (!strcmp(argv[2], "set")) {
-+			unsigned long mhz;
-+			if (argc < 3)
-+				goto out_help;
-+
-+			mhz = simple_strtoul(argv[3], NULL, 10);
-+
-+			if (reconfig_mpll(mhz) < 0)
-+				printf("error, speed %uMHz unknown\n", mhz);
-+			else
-+				print_cpu_speed();
-+		} else
-+			goto out_help;
-+	} else {
-+out_help:
-+		printf("Usage:\n%s\n", cmdtp->usage);
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+/* -------------------------------------------------------------------- */
-+
-+
-+U_BOOT_CMD(
-+	s3c2410,	4,	1,	do_s3c2410,
-+	"s3c2410 - SoC  specific commands\n",
-+	"speed get - display current PLL speed config\n"
-+	"s3c2410 speed list - display supporte PLL speed configs\n"
-+	"s3c2410 speed set - set PLL speed\n"
-+);
-+
-+#endif
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-cramfs_but_no_jffs2.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-cramfs_but_no_jffs2.patch
deleted file mode 100644
index 349b83697e..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-cramfs_but_no_jffs2.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-Fix building with CRAMFS but not JFFS2 support
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/fs/cramfs/cramfs.c
-===================================================================
---- u-boot.orig/fs/cramfs/cramfs.c	2007-02-17 11:46:26.000000000 +0100
-+++ u-boot/fs/cramfs/cramfs.c	2007-02-17 11:54:36.000000000 +0100
-@@ -27,7 +27,7 @@
- #include <common.h>
- #include <malloc.h>
- 
--#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
-+#if (CONFIG_COMMANDS & CFG_CMD_CRAMFS)
- 
- #include <asm/byteorder.h>
- #include <linux/stat.h>
-Index: u-boot/common/cmd_jffs2.c
-===================================================================
---- u-boot.orig/common/cmd_jffs2.c	2007-02-17 11:47:51.000000000 +0100
-+++ u-boot/common/cmd_jffs2.c	2007-02-17 14:08:25.000000000 +0100
-@@ -170,10 +170,19 @@
- static struct mtd_device *current_dev = NULL;
- static u8 current_partnum = 0;
- 
-+#ifdef CFG_CMD_CRAMFS
- extern int cramfs_check (struct part_info *info);
- extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename);
- extern int cramfs_ls (struct part_info *info, char *filename);
- extern int cramfs_info (struct part_info *info);
-+#else
-+/* defining empty macros for function names is ugly but avoids ifdef clutter
-+ * all over the code */
-+#define cramfs_check(x)		(0)
-+#define cramfs_load(x,y,z)	(-1)
-+#define cramfs_ls(x,y)		(0)
-+#define cramfs_info(x)		(0)
-+#endif
- 
- static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num);
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-dfu.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-dfu.patch
deleted file mode 100644
index ad319c0a26..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-dfu.patch
+++ /dev/null
@@ -1,2081 +0,0 @@
-Index: u-boot/drivers/usbdcore_ep0.c
-===================================================================
---- u-boot.orig/drivers/usbdcore_ep0.c
-+++ u-boot/drivers/usbdcore_ep0.c
-@@ -42,10 +42,15 @@
-  */
- 
- #include <common.h>
-+DECLARE_GLOBAL_DATA_PTR;
- 
- #if defined(CONFIG_USB_DEVICE)
- #include "usbdcore.h"
- 
-+#ifdef CONFIG_USBD_DFU
-+#include <usb_dfu.h>
-+#endif
-+
- #if 0
- #define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args)
- #else
-@@ -213,7 +218,7 @@
- 			urb->buffer = device_descriptor;
- 			urb->actual_length = MIN(sizeof(*device_descriptor), max);
- 		}
--		/*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */
-+		dbg_ep0(3, "using device configuration, actual_length: %x", urb->actual_length);
- 		break;
- 
- 	case USB_DESCRIPTOR_TYPE_CONFIGURATION:
-@@ -267,7 +272,24 @@
- 		return -1;
- 	case USB_DESCRIPTOR_TYPE_ENDPOINT:
- 		return -1;
-+	/* This really means "Class Specific Descriptor #1 == USB_DT_DFU */
- 	case USB_DESCRIPTOR_TYPE_HID:
-+#ifdef CONFIG_USBD_DFU
-+		{
-+			int bNumInterface =
-+				le16_to_cpu(urb->device_request.wIndex);
-+
-+			/* In runtime mode, we only respond to the DFU INTERFACE,
-+			 * whereas in DFU mode, we respond for all intrfaces */
-+			if (device->dfu_state != DFU_STATE_appIDLE &&
-+			    device->dfu_state != DFU_STATE_appDETACH ||
-+			    bNumInterface == CONFIG_USBD_DFU_INTERFACE) {
-+				urb->buffer = &device->dfu_cfg_desc->func_dfu;
-+				urb->actual_length = sizeof(struct usb_dfu_func_descriptor);
-+			} else
-+				return -1;
-+		}
-+#else /* CONFIG_USBD_DFU */
- 		{
- 			return -1;	/* unsupported at this time */
- #if 0
-@@ -294,6 +316,7 @@
- 				     max);
- #endif
- 		}
-+#endif /* CONFIG_USBD_DFU */
- 		break;
- 	case USB_DESCRIPTOR_TYPE_REPORT:
- 		{
-@@ -388,6 +411,24 @@
- 		 le16_to_cpu (request->wLength),
- 		 USBD_DEVICE_REQUESTS (request->bRequest));
- 
-+#ifdef CONFIG_USBD_DFU
-+	if ((request->bmRequestType & 0x3f) == USB_TYPE_DFU &&
-+	     (device->dfu_state != DFU_STATE_appIDLE ||
-+	      le16_to_cpu(request->wIndex) == CONFIG_USBD_DFU_INTERFACE)) {
-+		int rc = dfu_ep0_handler(urb);
-+		switch (rc) {
-+		case DFU_EP0_NONE:
-+		case DFU_EP0_UNHANDLED:
-+			break;
-+		case DFU_EP0_ZLP:
-+		case DFU_EP0_DATA:
-+			return 0;
-+		case DFU_EP0_STALL:
-+			return -1;
-+		}
-+	}
-+#endif /* CONFIG_USB_DFU */
-+
- 	/* handle USB Standard Request (c.f. USB Spec table 9-2) */
- 	if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
- 		if (device->device_state <= STATE_CONFIGURED)
-@@ -570,7 +611,8 @@
- 			device->interface = le16_to_cpu (request->wIndex);
- 			device->alternate = le16_to_cpu (request->wValue);
- 			/*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */
--			serial_printf ("DEVICE_SET_INTERFACE.. event?\n");
-+			usbd_device_event_irq(device, DEVICE_SET_INTERFACE,
-+						(request->wIndex << 16 | request->wValue));
- 			return 0;
- 
- 		case USB_REQ_GET_STATUS:
-Index: u-boot/drivers/usbdfu.c
-===================================================================
---- /dev/null
-+++ u-boot/drivers/usbdfu.c
-@@ -0,0 +1,1069 @@
-+/*
-+ * (C) 2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on existing SAM7DFU code from OpenPCD:
-+ * (C) Copyright 2006 by Harald Welte <hwelte@hmw-consulting.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ * TODO:
-+ * - make NAND support reasonably self-contained and put in apropriate
-+ *   ifdefs
-+ * - add some means of synchronization, i.e. block commandline access
-+ *   while DFU transfer is in progress, and return to commandline once
-+ *   we're finished
-+ * - add VERIFY support after writing to flash
-+ * - sanely free() resources allocated during first uppload/download
-+ *   request when aborting
-+ * - sanely free resources when another alternate interface is selected
-+ *
-+ * Maybe:
-+ * - add something like uImage or some other header that provides CRC
-+ *   checking?
-+ * - make 'dnstate' attached to 'struct usb_device_instance'
-+ */
-+
-+#include <config.h>
-+#if defined(CONFIG_USBD_DFU)
-+
-+#include <common.h>
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#include <malloc.h>
-+#include <linux/types.h>
-+#include <linux/list.h>
-+#include <asm/errno.h>
-+#include <usbdcore.h>
-+#include <usb_dfu.h>
-+#include <usb_dfu_descriptors.h>
-+#include <usb_dfu_trailer.h>
-+
-+#include <nand.h>
-+#include <jffs2/load_kernel.h>
-+int mtdparts_init(void);
-+extern struct list_head devices;
-+
-+#include "usbdcore_s3c2410.h"
-+#include "usbtty.h"			/* for STR_* defs */
-+
-+#define RET_NOTHING	0
-+#define RET_ZLP		1
-+#define RET_STALL	2
-+
-+volatile enum dfu_state *system_dfu_state; /* for 3rd parties */
-+
-+
-+struct dnload_state {
-+	nand_info_t *nand;
-+	struct part_info *part;
-+	unsigned int part_net_size;	/* net sizee (excl. bad blocks) of part */
-+
-+	nand_erase_options_t erase_opts;
-+	nand_write_options_t write_opts;
-+	nand_read_options_t read_opts;
-+
-+	unsigned char *ptr;	/* pointer to next empty byte in buffer */
-+	unsigned int off;	/* offset of current erase page in flash chip */
-+	unsigned char *buf;	/* pointer to allocated erase page buffer */
-+
-+	/* unless doing an atomic transfer, we use the static buffer below.
-+	 * This saves us from having to clean up dynamic allications in the
-+	 * various error paths of the code.  Also, it will always work, no
-+	 * matter what the memory situation is. */
-+	unsigned char _buf[0x20000];	/* FIXME: depends flash page size */
-+};
-+
-+static struct dnload_state _dnstate;
-+
-+static int dfu_trailer_matching(const struct uboot_dfu_trailer *trailer)
-+{
-+	if (trailer->magic != UBOOT_DFU_TRAILER_MAGIC ||
-+	    trailer->version != UBOOT_DFU_TRAILER_V1 ||
-+	    trailer->vendor != CONFIG_USBD_VENDORID ||
-+	    (trailer->product != CONFIG_USBD_PRODUCTID_CDCACM &&
-+	     trailer->product != CONFIG_USBD_PRODUCTID_GSERIAL))
-+		return 0;
-+#ifdef CONFIG_REVISION_TAG
-+	if (trailer->revision != get_board_rev())
-+		return 0;
-+#endif
-+
-+	return 1;
-+}
-+
-+static struct part_info *get_partition_nand(int idx)
-+{
-+	struct mtd_device *dev;
-+	struct part_info *part;
-+	struct list_head *pentry;
-+	int i;
-+
-+	if (mtdparts_init())
-+		return NULL;
-+	if (list_empty(&devices))
-+		return NULL;
-+
-+	dev = list_entry(devices.next, struct mtd_device, link);
-+	i = 0;
-+	list_for_each(pentry, &dev->parts) {
-+		if (i == idx)  {
-+			part = list_entry(pentry, struct part_info, link);
-+			return part;
-+		}
-+		i++;
-+	}
-+
-+	return NULL;
-+}
-+
-+#define LOAD_ADDR ((unsigned char *)0x32000000)
-+
-+static int initialize_ds_nand(struct usb_device_instance *dev, struct dnload_state *ds)
-+{
-+	ds->part = get_partition_nand(dev->alternate - 1);
-+	if (!ds->part) {
-+		printf("DFU: unable to find partition %u\b", dev->alternate-1);
-+   			dev->dfu_state = DFU_STATE_dfuERROR;
-+		dev->dfu_status = DFU_STATUS_errADDRESS;
-+		return RET_STALL;
-+	}
-+	ds->nand = &nand_info[ds->part->dev->id->num];
-+	ds->off = ds->part->offset;
-+	ds->part_net_size = nand_net_part_size(ds->part);
-+
-+	if (ds->nand->erasesize > sizeof(ds->_buf)) {
-+		printf("*** Warning - NAND ERASESIZE bigger than static buffer\n");
-+		ds->buf = malloc(ds->nand->erasesize);
-+		if (!ds->buf) {
-+			printf("DFU: can't allocate %u bytes\n", ds->nand->erasesize);
-+   			dev->dfu_state = DFU_STATE_dfuERROR;
-+			dev->dfu_status = DFU_STATUS_errADDRESS;
-+			return RET_STALL;
-+		}
-+	} else
-+		ds->buf = ds->_buf;
-+
-+	ds->ptr = ds->buf;
-+
-+	memset(&ds->read_opts, 0, sizeof(ds->read_opts));
-+
-+	memset(&ds->erase_opts, 0, sizeof(ds->erase_opts));
-+	ds->erase_opts.quiet = 1;
-+	/* FIXME: do this more dynamic */
-+	if (!strcmp(ds->part->name, "rootfs"))
-+		ds->erase_opts.jffs2 = 1;
-+
-+	memset(&ds->write_opts, 0, sizeof(ds->write_opts));
-+	ds->write_opts.pad = 1;
-+	ds->write_opts.blockalign = 1;
-+	ds->write_opts.quiet = 1;
-+
-+	debug("initialize_ds_nand(dev=%p, ds=%p): ", dev, ds);
-+	debug("nand=%p, ptr=%p, buf=%p, off=0x%x\n", ds->nand, ds->ptr, ds->buf, ds->off);
-+
-+	return RET_NOTHING;
-+}
-+
-+static int erase_flash_verify_nand(struct urb *urb, struct dnload_state *ds,
-+				   unsigned long erasesize, unsigned long size)
-+{
-+	struct usb_device_instance *dev = urb->device;
-+	int rc;
-+
-+	debug("erase_flash_verify_nand(urb=%p, ds=%p, erase=0x%x size=0x%x)\n",
-+		urb, ds, erasesize, size);
-+
-+	if (erasesize == ds->nand->erasesize) {
-+		/* we're only writing a single block and need to
-+		 * do bad block skipping / offset adjustments our own */
-+		while (ds->nand->block_isbad(ds->nand, ds->off)) {
-+			debug("SKIP_ONE_BLOCK(0x%08x)!!\n", ds->off);
-+			ds->off += ds->nand->erasesize;
-+		}
-+	}
-+
-+	/* we have finished one eraseblock, flash it */
-+	ds->erase_opts.offset = ds->off;
-+	ds->erase_opts.length = erasesize;
-+	debug("Erasing 0x%x bytes @ offset 0x%x (jffs=%u)\n",
-+		ds->erase_opts.length, ds->erase_opts.offset,
-+		ds->erase_opts.jffs2);
-+	rc = nand_erase_opts(ds->nand, &ds->erase_opts);
-+	if (rc) {
-+		debug("Error erasing\n");
-+	    	dev->dfu_state = DFU_STATE_dfuERROR;
-+		dev->dfu_status = DFU_STATUS_errERASE;
-+		return RET_STALL;
-+	}
-+
-+	ds->write_opts.buffer = ds->buf;
-+	ds->write_opts.length = size;
-+	ds->write_opts.offset = ds->off;
-+	debug("Writing 0x%x bytes @ offset 0x%x\n", size, ds->off);
-+	rc = nand_write_opts(ds->nand, &ds->write_opts);
-+	if (rc) {
-+		debug("Error writing\n");
-+  		dev->dfu_state = DFU_STATE_dfuERROR;
-+		dev->dfu_status = DFU_STATUS_errWRITE;
-+		return RET_STALL;
-+	}
-+
-+	ds->off += size;
-+	ds->ptr = ds->buf;
-+
-+	/* FIXME: implement verify! */
-+	return RET_NOTHING;
-+}
-+
-+static int erase_tail_clean_nand(struct urb *urb, struct dnload_state *ds)
-+{
-+	struct usb_device_instance *dev = urb->device;
-+	int rc;
-+
-+	ds->erase_opts.offset = ds->off;
-+	ds->erase_opts.length = ds->part->size-ds->off;
-+	debug("Erasing 0x%x bytes @ offset 0x%x (jffs=%u)\n",
-+		ds->erase_opts.length, ds->erase_opts.offset,
-+		ds->erase_opts.jffs2);
-+	rc = nand_erase_opts(ds->nand, &ds->erase_opts);
-+	if (rc) {
-+		debug("Error erasing\n");
-+	    	dev->dfu_state = DFU_STATE_dfuERROR;
-+		dev->dfu_status = DFU_STATUS_errERASE;
-+		return RET_STALL;
-+	}
-+
-+	ds->off += ds->part->size; /* for consistency */
-+
-+	return RET_NOTHING;
-+}
-+
-+/* Read the next erase blcok from NAND into buffer */
-+static int read_next_nand(struct urb *urb, struct dnload_state *ds)
-+{
-+	struct usb_device_instance *dev = urb->device;
-+	int rc;
-+
-+	ds->read_opts.buffer = ds->buf;
-+	ds->read_opts.length = ds->nand->erasesize;
-+	ds->read_opts.offset = ds->off;
-+	ds->read_opts.quiet = 1;
-+
-+	debug("Reading 0x%x@0x%x to 0x%08p\n", ds->nand->erasesize,
-+		ds->off, ds->buf);
-+	rc = nand_read_opts(ds->nand, &ds->read_opts);
-+	if (rc) {
-+		debug("Error reading\n");
-+  		dev->dfu_state = DFU_STATE_dfuERROR;
-+		dev->dfu_status = DFU_STATUS_errWRITE;
-+		return RET_STALL;
-+	}
-+	ds->off += ds->nand->erasesize;
-+	ds->ptr = ds->buf;
-+
-+	return RET_NOTHING;
-+}
-+
-+
-+static int handle_dnload(struct urb *urb, u_int16_t val, u_int16_t len, int first)
-+{
-+	struct usb_device_instance *dev = urb->device;
-+	struct dnload_state *ds = &_dnstate;
-+	unsigned int actual_len = len;
-+	unsigned int remain_len;
-+	unsigned long size;
-+	int rc;
-+
-+	debug("download(len=%u, first=%u) ", len, first);
-+
-+	if (len > CONFIG_USBD_DFU_XFER_SIZE) {
-+		/* Too big. Not that we'd really care, but it's a
-+		 * DFU protocol violation */
-+		debug("length exceeds flash page size ");
-+	    	dev->dfu_state = DFU_STATE_dfuERROR;
-+		dev->dfu_status = DFU_STATUS_errADDRESS;
-+		return RET_STALL;
-+	}
-+
-+	if (first) {
-+		/* Make sure that we have a valid mtd partition table */
-+		char *mtdp = getenv("mtdparts");
-+		if (!mtdp)
-+			run_command("dynpart", 0);
-+	}
-+
-+	if (len == 0) {
-+		debug("zero-size write -> MANIFEST_SYNC ");
-+		dev->dfu_state = DFU_STATE_dfuMANIFEST_SYNC;
-+
-+		/* cleanup */
-+		switch (dev->alternate) {
-+			char buf[12];
-+		case 0:
-+			sprintf(buf, "%lx", ds->ptr - ds->buf);
-+			setenv("filesize", buf);
-+			ds->ptr = ds->buf;
-+			break;
-+		case 1:
-+			if (ds->ptr >
-+			    ds->buf + sizeof(struct uboot_dfu_trailer)) {
-+				struct uboot_dfu_trailer trailer;
-+				dfu_trailer_mirror(&trailer, ds->ptr);
-+				if (!dfu_trailer_matching(&trailer)) {
-+					printf("DFU TRAILER NOT OK\n");
-+					dev->dfu_state = DFU_STATE_dfuERROR;
-+					dev->dfu_status = DFU_STATUS_errTARGET;
-+					return RET_STALL;
-+				}
-+
-+				rc = erase_flash_verify_nand(urb, ds,
-+							ds->part->size,
-+							ds->part_net_size);
-+				/* re-write dynenv marker in OOB */
-+				run_command("dynenv set u-boot_env", 0);
-+			}
-+			ds->nand = NULL;
-+			free(ds->buf);
-+			ds->ptr = ds->buf = ds->_buf;
-+			break;
-+		default:
-+			rc = 0;
-+			if (ds->ptr > ds->buf)
-+				rc = erase_flash_verify_nand(urb, ds,
-+							ds->nand->erasesize,
-+							ds->nand->erasesize);
-+			/* rootfs partition */
-+			if (!rc && dev->alternate == 5)
-+				rc = erase_tail_clean_nand(urb, ds);
-+
-+			ds->nand = NULL;
-+			break;
-+		}
-+
-+		return RET_ZLP;
-+	}
-+
-+	if (urb->actual_length != len) {
-+		debug("urb->actual_length(%u) != len(%u) ?!? ",
-+			urb->actual_length, len);
-+	    	dev->dfu_state = DFU_STATE_dfuERROR;
-+		dev->dfu_status = DFU_STATUS_errADDRESS;
-+		return RET_STALL;
-+	}
-+
-+	if (first && ds->buf && ds->buf != ds->_buf && ds->buf != LOAD_ADDR) {
-+		free(ds->buf);
-+		ds->buf = ds->_buf;
-+	}
-+
-+	switch (dev->alternate) {
-+	case 0:
-+		if (first) {
-+			printf("Starting DFU DOWNLOAD to RAM (0x%08p)\n",
-+				LOAD_ADDR);
-+			ds->buf = LOAD_ADDR;
-+			ds->ptr = ds->buf;
-+		}
-+
-+		memcpy(ds->ptr, urb->buffer, len);
-+		ds->ptr += len;
-+		break;
-+	case 1:
-+		if (first) {
-+			rc = initialize_ds_nand(dev, ds);
-+			if (rc)
-+				return rc;
-+			ds->buf = malloc(ds->part_net_size);
-+			if (!ds->buf) {
-+				printf("No memory for atomic buffer!!\n");
-+				dev->dfu_state = DFU_STATE_dfuERROR;
-+				dev->dfu_status = DFU_STATUS_errUNKNOWN;
-+				return RET_STALL;
-+			}
-+			ds->ptr = ds->buf;
-+			printf("Starting Atomic DFU DOWNLOAD to partition '%s'\n",
-+				ds->part->name);
-+		}
-+
-+		remain_len = (ds->buf + ds->part_net_size) - ds->ptr;
-+		if (remain_len < len) {
-+			len = remain_len;
-+			printf("End of write exceeds partition end\n");
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			dev->dfu_status = DFU_STATUS_errADDRESS;
-+			return RET_STALL;
-+		}
-+		memcpy(ds->ptr, urb->buffer, len);
-+		ds->ptr += len;
-+		break;
-+	default:
-+		if (first) {
-+			rc = initialize_ds_nand(dev, ds);
-+			if (rc)
-+				return rc;
-+			printf("Starting DFU DOWNLOAD to partition '%s'\n",
-+				ds->part->name);
-+		}
-+
-+		size = ds->nand->erasesize;
-+		remain_len = ds->buf + size - ds->ptr;
-+		if (remain_len < len)
-+			actual_len = remain_len;
-+
-+		memcpy(ds->ptr, urb->buffer, actual_len);
-+		ds->ptr += actual_len;
-+
-+		/* check partition end */
-+		if (ds->off + (ds->ptr - ds->buf) > ds->part->offset + ds->part->size) {
-+			printf("End of write exceeds partition end\n");
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			dev->dfu_status = DFU_STATUS_errADDRESS;
-+			return RET_STALL;
-+		}
-+
-+		if (ds->ptr >= ds->buf + size) {
-+			rc = erase_flash_verify_nand(urb, ds,
-+						     ds->nand->erasesize,
-+						     ds->nand->erasesize);
-+			if (rc)
-+				return rc;
-+			/* copy remainder of data into buffer */
-+			memcpy(ds->ptr, urb->buffer + actual_len, len - actual_len);
-+			ds->ptr += (len - actual_len);
-+		}
-+		break;
-+	}
-+
-+	return RET_ZLP;
-+}
-+
-+static int handle_upload(struct urb *urb, u_int16_t val, u_int16_t len, int first)
-+{
-+	struct usb_device_instance *dev = urb->device;
-+	struct dnload_state *ds = &_dnstate;
-+	unsigned int remain;
-+	int rc;
-+
-+	debug("upload(val=0x%02x, len=%u, first=%u) ", val, len, first);
-+
-+	if (len > CONFIG_USBD_DFU_XFER_SIZE) {
-+		/* Too big */
-+		dev->dfu_state = DFU_STATE_dfuERROR;
-+		dev->dfu_status = DFU_STATUS_errADDRESS;
-+		//udc_ep0_send_stall();
-+		debug("Error: Transfer size > CONFIG_USBD_DFU_XFER_SIZE ");
-+		return -EINVAL;
-+	}
-+
-+	switch (dev->alternate) {
-+	case 0:
-+		if (first) {
-+			printf("Starting DFU Upload of RAM (0x%08p)\n",
-+				LOAD_ADDR);
-+			ds->ptr = ds->buf;
-+		}
-+
-+		/* FIXME: end at some more dynamic point */
-+		if (ds->ptr + len > LOAD_ADDR + 0x200000)
-+			len = (LOAD_ADDR + 0x200000) - ds->ptr;
-+
-+		urb->buffer = ds->ptr;
-+		urb->actual_length = len;
-+		ds->ptr += len;
-+		break;
-+	default:
-+		if (first) {
-+			rc = initialize_ds_nand(dev, ds);
-+			if (rc)
-+				return -EINVAL;
-+			printf("Starting DFU Upload of partition '%s'\n",
-+				ds->part->name);
-+			rc = read_next_nand(urb, ds);
-+			if (rc)
-+				return -EINVAL;
-+		}
-+
-+		if (len > ds->nand->erasesize) {
-+			printf("We don't support transfers bigger than %u\n",
-+				ds->nand->erasesize);
-+			len = ds->nand->erasesize;
-+		}
-+
-+		remain = ds->nand->erasesize - (ds->ptr - ds->buf);
-+		if (len < remain)
-+			remain = len;
-+
-+		debug("copying %u bytes ", remain);
-+		urb->buffer = ds->ptr;
-+		ds->ptr += remain;
-+		urb->actual_length = remain;
-+
-+		if (ds->ptr >= ds->buf + ds->nand->erasesize &&
-+		    ds->off < ds->part->offset + ds->part->size) {
-+			rc = read_next_nand(urb, ds);
-+			if (rc)
-+				return -EINVAL;
-+			if (len > remain) {
-+				debug("copying another %u bytes ", len - remain);
-+				memcpy(urb->buffer + remain, ds->ptr, len - remain);
-+				ds->ptr += (len - remain);
-+				urb->actual_length += (len - remain);
-+			}
-+		}
-+		break;
-+	}
-+
-+	debug("returning len=%u\n", len);
-+	return len;
-+}
-+
-+static void handle_getstatus(struct urb *urb, int max)
-+{
-+	struct usb_device_instance *dev = urb->device;
-+	struct dfu_status *dstat = (struct dfu_status *) urb->buffer;
-+
-+	debug("getstatus ");
-+
-+	if (!urb->buffer || urb->buffer_length < sizeof(*dstat)) {
-+		debug("invalid urb! ");
-+		return;
-+	}
-+
-+	switch (dev->dfu_state) {
-+	case DFU_STATE_dfuDNLOAD_SYNC:
-+	case DFU_STATE_dfuDNBUSY:
-+#if 0
-+		if (fsr & AT91C_MC_PROGE) {
-+			debug("errPROG ");
-+			dev->dfu_status = DFU_STATUS_errPROG;
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+		} else if (fsr & AT91C_MC_LOCKE) {
-+			debug("errWRITE ");
-+			dev->dfu_status = DFU_STATUS_errWRITE;
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+		} else if (fsr & AT91C_MC_FRDY) {
-+#endif
-+			debug("DNLOAD_IDLE ");
-+			dev->dfu_state = DFU_STATE_dfuDNLOAD_IDLE;
-+#if 0
-+		} else {
-+			debug("DNBUSY ");
-+			dev->dfu_state = DFU_STATE_dfuDNBUSY;
-+		}
-+#endif
-+		break;
-+	case DFU_STATE_dfuMANIFEST_SYNC:
-+		break;
-+	default:
-+		//return;
-+		break;
-+	}
-+
-+	/* send status response */
-+	dstat->bStatus = dev->dfu_status;
-+	dstat->bState = dev->dfu_state;
-+	dstat->iString = 0;
-+	/* FIXME: set dstat->bwPollTimeout */
-+	urb->actual_length = MIN(sizeof(*dstat), max);
-+
-+	/* we don't need to explicitly send data here, will
-+	 * be done by the original caller! */
-+}
-+
-+static void handle_getstate(struct urb *urb, int max)
-+{
-+	debug("getstate ");
-+
-+	if (!urb->buffer || urb->buffer_length < sizeof(u_int8_t)) {
-+		debug("invalid urb! ");
-+		return;
-+	}
-+
-+	urb->buffer[0] = urb->device->dfu_state & 0xff;
-+	urb->actual_length = sizeof(u_int8_t);
-+}
-+
-+#ifndef CONFIG_USBD_PRODUCTID_DFU
-+#define CONFIG_USBD_PRODUCTID_DFU CONFIG_USBD_PRODUCTID_CDCACM
-+#endif
-+
-+static const struct usb_device_descriptor dfu_dev_descriptor = {
-+	.bLength		= USB_DT_DEVICE_SIZE,
-+	.bDescriptorType	= USB_DT_DEVICE,
-+	.bcdUSB			= 0x0100,
-+	.bDeviceClass		= 0x00,
-+	.bDeviceSubClass	= 0x00,
-+	.bDeviceProtocol	= 0x00,
-+	.bMaxPacketSize0	= EP0_MAX_PACKET_SIZE,
-+	.idVendor		= CONFIG_USBD_VENDORID,
-+	.idProduct		= CONFIG_USBD_PRODUCTID_DFU,
-+	.bcdDevice		= 0x0000,
-+	.iManufacturer		= DFU_STR_MANUFACTURER,
-+	.iProduct		= DFU_STR_PRODUCT,
-+	.iSerialNumber		= DFU_STR_SERIAL,
-+	.bNumConfigurations	= 0x01,
-+};
-+
-+static const struct _dfu_desc dfu_cfg_descriptor = {
-+	.ucfg = {
-+		.bLength		= USB_DT_CONFIG_SIZE,
-+		.bDescriptorType	= USB_DT_CONFIG,
-+		.wTotalLength		= USB_DT_CONFIG_SIZE +
-+					  DFU_NUM_ALTERNATES * USB_DT_INTERFACE_SIZE +
-+					  USB_DT_DFU_SIZE,
-+		.bNumInterfaces		= 5,
-+		.bConfigurationValue	= 1,
-+		.iConfiguration		= DFU_STR_CONFIG,
-+		.bmAttributes		= BMATTRIBUTE_RESERVED,
-+		.bMaxPower		= 50,
-+	},
-+	.uif[0] = {
-+		.bLength		= USB_DT_INTERFACE_SIZE,
-+		.bDescriptorType	= USB_DT_INTERFACE,
-+		.bInterfaceNumber	= 0x00,
-+		.bAlternateSetting	= 0x00,
-+		.bNumEndpoints		= 0x00,
-+		.bInterfaceClass	= 0xfe,
-+		.bInterfaceSubClass	= 0x01,
-+		.bInterfaceProtocol	= 0x02,
-+		.iInterface		= DFU_STR_ALT0,
-+	},
-+	.uif[1] = {
-+		.bLength		= USB_DT_INTERFACE_SIZE,
-+		.bDescriptorType	= USB_DT_INTERFACE,
-+		.bInterfaceNumber	= 0x00,
-+		.bAlternateSetting	= 0x01,
-+		.bNumEndpoints		= 0x00,
-+		.bInterfaceClass	= 0xfe,
-+		.bInterfaceSubClass	= 0x01,
-+		.bInterfaceProtocol	= 0x02,
-+		.iInterface		= DFU_STR_ALT1,
-+	},
-+	.uif[2] = {
-+		.bLength		= USB_DT_INTERFACE_SIZE,
-+		.bDescriptorType	= USB_DT_INTERFACE,
-+		.bInterfaceNumber	= 0x00,
-+		.bAlternateSetting	= 0x02,
-+		.bNumEndpoints		= 0x00,
-+		.bInterfaceClass	= 0xfe,
-+		.bInterfaceSubClass	= 0x01,
-+		.bInterfaceProtocol	= 0x02,
-+		.iInterface		= DFU_STR_ALT2,
-+	},
-+	.uif[3] = {
-+		.bLength		= USB_DT_INTERFACE_SIZE,
-+		.bDescriptorType	= USB_DT_INTERFACE,
-+		.bInterfaceNumber	= 0x00,
-+		.bAlternateSetting	= 0x03,
-+		.bNumEndpoints		= 0x00,
-+		.bInterfaceClass	= 0xfe,
-+		.bInterfaceSubClass	= 0x01,
-+		.bInterfaceProtocol	= 0x02,
-+		.iInterface		= DFU_STR_ALT3,
-+	},
-+	.uif[4] = {
-+		.bLength		= USB_DT_INTERFACE_SIZE,
-+		.bDescriptorType	= USB_DT_INTERFACE,
-+		.bInterfaceNumber	= 0x00,
-+		.bAlternateSetting	= 0x04,
-+		.bNumEndpoints		= 0x00,
-+		.bInterfaceClass	= 0xfe,
-+		.bInterfaceSubClass	= 0x01,
-+		.bInterfaceProtocol	= 0x02,
-+		.iInterface		= DFU_STR_ALT4,
-+	},
-+	.uif[5] = {
-+		.bLength		= USB_DT_INTERFACE_SIZE,
-+		.bDescriptorType	= USB_DT_INTERFACE,
-+		.bInterfaceNumber	= 0x00,
-+		.bAlternateSetting	= 0x05,
-+		.bNumEndpoints		= 0x00,
-+		.bInterfaceClass	= 0xfe,
-+		.bInterfaceSubClass	= 0x01,
-+		.bInterfaceProtocol	= 0x02,
-+		.iInterface		= DFU_STR_ALT5,
-+	},
-+	.func_dfu = DFU_FUNC_DESC,
-+};
-+
-+int dfu_ep0_handler(struct urb *urb)
-+{
-+	int rc, ret = RET_NOTHING;
-+	u_int8_t req = urb->device_request.bRequest;
-+	u_int16_t val = urb->device_request.wValue;
-+	u_int16_t len = urb->device_request.wLength;
-+	struct usb_device_instance *dev = urb->device;
-+
-+	debug("dfu_ep0(req=0x%x, val=0x%x, len=%u) old_state = %u ",
-+		req, val, len, dev->dfu_state);
-+
-+	switch (dev->dfu_state) {
-+	case DFU_STATE_appIDLE:
-+		switch (req) {
-+		case USB_REQ_DFU_GETSTATUS:
-+			handle_getstatus(urb, len);
-+			break;
-+		case USB_REQ_DFU_GETSTATE:
-+			handle_getstate(urb, len);
-+			break;
-+		case USB_REQ_DFU_DETACH:
-+			dev->dfu_state = DFU_STATE_appDETACH;
-+			ret = RET_ZLP;
-+			goto out;
-+			break;
-+		default:
-+			ret = RET_STALL;
-+		}
-+		break;
-+	case DFU_STATE_appDETACH:
-+		switch (req) {
-+		case USB_REQ_DFU_GETSTATUS:
-+			handle_getstatus(urb, len);
-+			break;
-+		case USB_REQ_DFU_GETSTATE:
-+			handle_getstate(urb, len);
-+			break;
-+		default:
-+			dev->dfu_state = DFU_STATE_appIDLE;
-+			ret = RET_STALL;
-+			goto out;
-+			break;
-+		}
-+		/* FIXME: implement timer to return to appIDLE */
-+		break;
-+	case DFU_STATE_dfuIDLE:
-+		switch (req) {
-+		case USB_REQ_DFU_DNLOAD:
-+			if (len == 0) {
-+				dev->dfu_state = DFU_STATE_dfuERROR;
-+				ret = RET_STALL;
-+				goto out;
-+			}
-+			dev->dfu_state = DFU_STATE_dfuDNLOAD_SYNC;
-+			ret = handle_dnload(urb, val, len, 1);
-+			break;
-+		case USB_REQ_DFU_UPLOAD:
-+			dev->dfu_state = DFU_STATE_dfuUPLOAD_IDLE;
-+			handle_upload(urb, val, len, 1);
-+			break;
-+		case USB_REQ_DFU_ABORT:
-+			/* no zlp? */
-+			ret = RET_ZLP;
-+			break;
-+		case USB_REQ_DFU_GETSTATUS:
-+			handle_getstatus(urb, len);
-+			break;
-+		case USB_REQ_DFU_GETSTATE:
-+			handle_getstate(urb, len);
-+			break;
-+		case USB_REQ_DFU_DETACH:
-+			/* Proprietary extension: 'detach' from idle mode and
-+			 * get back to runtime mode in case of USB Reset.  As
-+			 * much as I dislike this, we just can't use every USB
-+			 * bus reset to switch back to runtime mode, since at
-+			 * least the Linux USB stack likes to send a number of resets
-+			 * in a row :( */
-+			dev->dfu_state = DFU_STATE_dfuMANIFEST_WAIT_RST;
-+			break;
-+		default:
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			ret = RET_STALL;
-+			goto out;
-+			break;
-+		}
-+		break;
-+	case DFU_STATE_dfuDNLOAD_SYNC:
-+		switch (req) {
-+		case USB_REQ_DFU_GETSTATUS:
-+			handle_getstatus(urb, len);
-+			/* FIXME: state transition depending on block completeness */
-+			break;
-+		case USB_REQ_DFU_GETSTATE:
-+			handle_getstate(urb, len);
-+			break;
-+		default:
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			ret = RET_STALL;
-+			goto out;
-+		}
-+		break;
-+	case DFU_STATE_dfuDNBUSY:
-+		switch (req) {
-+		case USB_REQ_DFU_GETSTATUS:
-+			/* FIXME: only accept getstatus if bwPollTimeout
-+			 * has elapsed */
-+			handle_getstatus(urb, len);
-+			break;
-+		default:
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			ret = RET_STALL;
-+			goto out;
-+		}
-+		break;
-+	case DFU_STATE_dfuDNLOAD_IDLE:
-+		switch (req) {
-+		case USB_REQ_DFU_DNLOAD:
-+			dev->dfu_state = DFU_STATE_dfuDNLOAD_SYNC;
-+			ret = handle_dnload(urb, val, len, 0);
-+			break;
-+		case USB_REQ_DFU_ABORT:
-+			dev->dfu_state = DFU_STATE_dfuIDLE;
-+			ret = RET_ZLP;
-+			break;
-+		case USB_REQ_DFU_GETSTATUS:
-+			handle_getstatus(urb, len);
-+			break;
-+		case USB_REQ_DFU_GETSTATE:
-+			handle_getstate(urb, len);
-+			break;
-+		default:
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			ret = RET_STALL;
-+			break;
-+		}
-+		break;
-+	case DFU_STATE_dfuMANIFEST_SYNC:
-+		switch (req) {
-+		case USB_REQ_DFU_GETSTATUS:
-+			/* We're MainfestationTolerant */
-+			dev->dfu_state = DFU_STATE_dfuIDLE;
-+			handle_getstatus(urb, len);
-+			break;
-+		case USB_REQ_DFU_GETSTATE:
-+			handle_getstate(urb, len);
-+			break;
-+		default:
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			ret = RET_STALL;
-+			break;
-+		}
-+		break;
-+	case DFU_STATE_dfuMANIFEST:
-+		/* we should never go here */
-+		dev->dfu_state = DFU_STATE_dfuERROR;
-+		ret = RET_STALL;
-+		break;
-+	case DFU_STATE_dfuMANIFEST_WAIT_RST:
-+		/* we should never go here */
-+		break;
-+	case DFU_STATE_dfuUPLOAD_IDLE:
-+		switch (req) {
-+		case USB_REQ_DFU_UPLOAD:
-+			/* state transition if less data then requested */
-+			rc = handle_upload(urb, val, len, 0);
-+			if (rc >= 0 && rc < len)
-+				dev->dfu_state = DFU_STATE_dfuIDLE;
-+			break;
-+		case USB_REQ_DFU_ABORT:
-+			dev->dfu_state = DFU_STATE_dfuIDLE;
-+			/* no zlp? */
-+			ret = RET_ZLP;
-+			break;
-+		case USB_REQ_DFU_GETSTATUS:
-+			handle_getstatus(urb, len);
-+			break;
-+		case USB_REQ_DFU_GETSTATE:
-+			handle_getstate(urb, len);
-+			break;
-+		default:
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			ret = RET_STALL;
-+			break;
-+		}
-+		break;
-+	case DFU_STATE_dfuERROR:
-+		switch (req) {
-+		case USB_REQ_DFU_GETSTATUS:
-+			handle_getstatus(urb, len);
-+			break;
-+		case USB_REQ_DFU_GETSTATE:
-+			handle_getstate(urb, len);
-+			break;
-+		case USB_REQ_DFU_CLRSTATUS:
-+			dev->dfu_state = DFU_STATE_dfuIDLE;
-+			dev->dfu_status = DFU_STATUS_OK;
-+			/* no zlp? */
-+			ret = RET_ZLP;
-+			break;
-+		default:
-+			dev->dfu_state = DFU_STATE_dfuERROR;
-+			ret = RET_STALL;
-+			break;
-+		}
-+		break;
-+	default:
-+		return DFU_EP0_UNHANDLED;
-+		break;
-+	}
-+
-+out:
-+	debug("new_state = %u, ret = %u\n", dev->dfu_state, ret);
-+
-+	switch (ret) {
-+	case RET_ZLP:
-+		//udc_ep0_send_zlp();
-+		urb->actual_length = 0;
-+		return DFU_EP0_ZLP;
-+		break;
-+	case RET_STALL:
-+		//udc_ep0_send_stall();
-+		return DFU_EP0_STALL;
-+		break;
-+	case RET_NOTHING:
-+		break;
-+	}
-+
-+	return DFU_EP0_DATA;
-+}
-+
-+void str2wide (char *str, u16 * wide);
-+static struct usb_string_descriptor *create_usbstring(char *string)
-+{
-+	struct usb_string_descriptor *strdesc;
-+	int size = sizeof(*strdesc) + strlen(string)*2;
-+
-+	if (size > 255)
-+		return NULL;
-+
-+	strdesc = malloc(size);
-+	if (!strdesc)
-+		return NULL;
-+
-+	strdesc->bLength = size;
-+	strdesc->bDescriptorType = USB_DT_STRING;
-+	str2wide(string, strdesc->wData);
-+
-+	return strdesc;
-+}
-+
-+
-+static void dfu_init_strings(struct usb_device_instance *dev)
-+{
-+	int i;
-+	struct usb_string_descriptor *strdesc;
-+
-+	strdesc = create_usbstring(CONFIG_DFU_CFG_STR);
-+	usb_strings[DFU_STR_CONFIG] = strdesc;
-+
-+	for (i = 0; i < DFU_NUM_ALTERNATES; i++) {
-+		if (i == 0) {
-+			strdesc = create_usbstring(CONFIG_DFU_ALT0_STR);
-+		} else {
-+			struct part_info *part = get_partition_nand(i-1);
-+
-+			if (part)
-+				strdesc = create_usbstring(part->name);
-+			else
-+				strdesc =
-+				    create_usbstring("undefined partition");
-+		}
-+		if (!strdesc)
-+			continue;
-+		usb_strings[STR_COUNT+i+1] = strdesc;
-+	}
-+}
-+
-+int dfu_init_instance(struct usb_device_instance *dev)
-+{
-+	dev->dfu_dev_desc = &dfu_dev_descriptor;
-+	dev->dfu_cfg_desc = &dfu_cfg_descriptor;
-+	dev->dfu_state = DFU_STATE_appIDLE;
-+	dev->dfu_status = DFU_STATUS_OK;
-+
-+	if (system_dfu_state)
-+		printf("SURPRISE: system_dfu_state is already set\n");
-+	system_dfu_state = &dev->dfu_state;
-+
-+	dfu_init_strings(dev);
-+
-+	return 0;
-+}
-+
-+static int stdout_switched;
-+
-+/* event handler for usb device state events */
-+void dfu_event(struct usb_device_instance *device,
-+	       usb_device_event_t event, int data)
-+{
-+	char *out;
-+
-+	switch (event) {
-+	case DEVICE_RESET:
-+		switch (device->dfu_state) {
-+		case DFU_STATE_appDETACH:
-+			device->dfu_state = DFU_STATE_dfuIDLE;
-+			out = getenv("stdout");
-+			if (out && !strcmp(out, "usbtty")) {
-+				setenv("stdout", "vga");
-+				setenv("stderr", "vga");
-+				stdout_switched = 1;
-+			}
-+			printf("DFU: Switching to DFU Mode\n");
-+			break;
-+		case DFU_STATE_dfuMANIFEST_WAIT_RST:
-+			device->dfu_state = DFU_STATE_appIDLE;
-+			printf("DFU: Switching back to Runtime mode\n");
-+			if (stdout_switched) {
-+				setenv("stdout", "usbtty");
-+				setenv("stderr", "usbtty");
-+				stdout_switched = 0;
-+			}
-+			break;
-+		default:
-+			break;
-+		}
-+		break;
-+	case DEVICE_CONFIGURED:
-+	case DEVICE_DE_CONFIGURED:
-+		debug("SET_CONFIGURATION(%u) ", device->configuration);
-+		/* fallthrough */
-+	case DEVICE_SET_INTERFACE:
-+		debug("SET_INTERFACE(%u,%u) old_state = %u ",
-+			device->interface, device->alternate,
-+			device->dfu_state);
-+		switch (device->dfu_state) {
-+		case DFU_STATE_appIDLE:
-+		case DFU_STATE_appDETACH:
-+		case DFU_STATE_dfuIDLE:
-+		case DFU_STATE_dfuMANIFEST_WAIT_RST:
-+			/* do nothing, we're fine */
-+			break;
-+		case DFU_STATE_dfuDNLOAD_SYNC:
-+		case DFU_STATE_dfuDNBUSY:
-+		case DFU_STATE_dfuDNLOAD_IDLE:
-+		case DFU_STATE_dfuMANIFEST:
-+			device->dfu_state = DFU_STATE_dfuERROR;
-+			device->dfu_status = DFU_STATUS_errNOTDONE;
-+			/* FIXME: free malloc()ed buffer! */
-+			break;
-+		case DFU_STATE_dfuMANIFEST_SYNC:
-+		case DFU_STATE_dfuUPLOAD_IDLE:
-+		case DFU_STATE_dfuERROR:
-+			device->dfu_state = DFU_STATE_dfuERROR;
-+			device->dfu_status = DFU_STATUS_errUNKNOWN;
-+			break;
-+		}
-+		debug("new_state = %u\n", device->dfu_state);
-+		break;
-+	default:
-+		break;
-+	}
-+}
-+#endif /* CONFIG_USBD_DFU */
-Index: u-boot/drivers/Makefile
-===================================================================
---- u-boot.orig/drivers/Makefile
-+++ u-boot/drivers/Makefile
-@@ -47,7 +47,7 @@
- 	  status_led.o sym53c8xx.o systemace.o ahci.o \
- 	  ti_pci1410a.o tigon3.o tsec.o \
- 	  tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
--	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \
-+	  usbdcore.o usbdfu.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \
- 	  videomodes.o w83c553f.o \
- 	  ks8695eth.o \
- 	  pcf50606.o \
-Index: u-boot/drivers/usbdcore.c
-===================================================================
---- u-boot.orig/drivers/usbdcore.c
-+++ u-boot/drivers/usbdcore.c
-@@ -31,6 +31,7 @@
- 
- #include <malloc.h>
- #include "usbdcore.h"
-+#include <usb_dfu.h>
- 
- #define MAX_INTERFACES 2
- 
-@@ -212,6 +213,10 @@
-  */
- struct usb_device_descriptor *usbd_device_device_descriptor (struct usb_device_instance *device, int port)
- {
-+#ifdef CONFIG_USBD_DFU
-+	if (device->dfu_state != DFU_STATE_appIDLE)
-+		return device->dfu_dev_desc;
-+#endif
- 	return (device->device_descriptor);
- }
- 
-@@ -232,6 +237,10 @@
- 	if (!(configuration_instance = usbd_device_configuration_instance (device, port, configuration))) {
- 		return NULL;
- 	}
-+#ifdef CONFIG_USBD_DFU
-+	if (device->dfu_state != DFU_STATE_appIDLE)
-+		return (&device->dfu_cfg_desc->ucfg);
-+#endif
- 	return (configuration_instance->configuration_descriptor);
- }
- 
-@@ -253,6 +262,13 @@
- 	if (!(interface_instance = usbd_device_interface_instance (device, port, configuration, interface))) {
- 		return NULL;
- 	}
-+#ifdef CONFIG_USBD_DFU
-+	if (device->dfu_state != DFU_STATE_appIDLE) {
-+		if (alternate < 0 || alternate >= DFU_NUM_ALTERNATES)
-+			return NULL;
-+		return &device->dfu_cfg_desc->uif[alternate];
-+	}
-+#endif
- 	if ((alternate < 0) || (alternate >= interface_instance->alternates)) {
- 		return NULL;
- 	}
-@@ -681,4 +697,7 @@
- 		/* usbdbg("calling device->event"); */
- 		device->event(device, event, data);
- 	}
-+#ifdef CONFIG_USBD_DFU
-+	dfu_event(device, event, data);
-+#endif
- }
-Index: u-boot/drivers/usbtty.c
-===================================================================
---- u-boot.orig/drivers/usbtty.c
-+++ u-boot/drivers/usbtty.c
-@@ -31,6 +31,8 @@
- #include "usbtty.h"
- #include "usb_cdc_acm.h"
- #include "usbdescriptors.h"
-+#include <usb_dfu_descriptors.h>
-+#include <usb_dfu.h>
- #include <config.h>		/* If defined, override Linux identifiers with
- 			   	 * vendor specific ones */
- 
-@@ -118,7 +120,7 @@
- static unsigned short rx_endpoint = 0;
- static unsigned short tx_endpoint = 0;
- static unsigned short interface_count = 0;
--static struct usb_string_descriptor *usbtty_string_table[STR_COUNT];
-+static struct usb_string_descriptor *usbtty_string_table[NUM_STRINGS];
- 
- /* USB Descriptor Strings */
- static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4};
-@@ -169,6 +171,10 @@
- 	struct usb_interface_descriptor data_class_interface;
- 	struct usb_endpoint_descriptor 
- 		data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed));
-+#ifdef CONFIG_USBD_DFU
-+	struct usb_interface_descriptor uif_dfu;
-+	struct usb_dfu_func_descriptor func_dfu;
-+#endif
- } __attribute__((packed));
- 
- static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
-@@ -179,7 +185,11 @@
-     			.bDescriptorType = USB_DT_CONFIG,
- 			.wTotalLength =	 
- 				cpu_to_le16(sizeof(struct acm_config_desc)),
-+#ifdef CONFIG_USBD_DFU
-+	    		.bNumInterfaces = NUM_ACM_INTERFACES +1,
-+#else
- 	    		.bNumInterfaces = NUM_ACM_INTERFACES,
-+#endif
-     			.bConfigurationValue = 1,
- 			.iConfiguration = STR_CONFIG,
- 			.bmAttributes = 
-@@ -278,6 +288,11 @@
- 				.bInterval		= 0xFF,
- 			},
- 		},
-+#ifdef CONFIG_USBD_DFU
-+		/* Interface 3 */
-+		.uif_dfu = DFU_RT_IF_DESC,
-+		.func_dfu = DFU_FUNC_DESC,
-+#endif
- 	},
- };	
- 
-@@ -390,7 +405,7 @@
- void usbtty_poll (void);
- 
- /* utility function for converting char* to wide string used by USB */
--static void str2wide (char *str, u16 * wide)
-+void str2wide (char *str, u16 * wide)
- {
- 	int i;
- 	for (i = 0; i < strlen (str) && str[i]; i++){
-@@ -652,6 +667,9 @@
- 	device_instance->bus = bus_instance;
- 	device_instance->configurations = NUM_CONFIGS;
- 	device_instance->configuration_instance_array = config_instance;
-+#ifdef CONFIG_USBD_DFU
-+	dfu_init_instance(device_instance);
-+#endif
- 
- 	/* initialize bus instance */
- 	memset (bus_instance, 0, sizeof (struct usb_bus_instance));
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -167,7 +167,7 @@
-  */
- #define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
- #ifdef CONFIG_USE_IRQ
--#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_IRQ	(8*1024)	/* IRQ stack */
- #define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
- #endif
- 
-@@ -184,6 +184,10 @@
- #define CONFIG_USBD_MANUFACTURER	"Openmoko, Inc"
- #define CONFIG_USBD_PRODUCT_NAME	"Neo1973 Bootloader " U_BOOT_VERSION
- #define CONFIG_EXTRA_ENV_SETTINGS 	"usbtty=cdc_acm\0"
-+#define CONFIG_USBD_DFU			1
-+#define CONFIG_USBD_DFU_XFER_SIZE 	4096	/* 0x4000 */
-+#define CONFIG_USBD_DFU_INTERFACE	2
-+
- 
- /*-----------------------------------------------------------------------
-  * Physical Memory Map
-Index: u-boot/include/usb_dfu.h
-===================================================================
---- /dev/null
-+++ u-boot/include/usb_dfu.h
-@@ -0,0 +1,99 @@
-+#ifndef _DFU_H
-+#define _DFU_H
-+
-+/* USB Device Firmware Update Implementation for u-boot
-+ * (C) 2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on: USB Device Firmware Update Implementation for OpenPCD
-+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
-+ *
-+ * This ought to be compliant to the USB DFU Spec 1.0 as available from
-+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <asm/types.h>
-+#include <usbdescriptors.h>
-+#include <usb_dfu_descriptors.h>
-+#include <config.h>
-+
-+/* USB DFU functional descriptor */
-+#define DFU_FUNC_DESC  {						\
-+	.bLength		= USB_DT_DFU_SIZE,			\
-+	.bDescriptorType	= USB_DT_DFU,				\
-+	.bmAttributes		= USB_DFU_CAN_UPLOAD | USB_DFU_CAN_DOWNLOAD | USB_DFU_MANIFEST_TOL, \
-+	.wDetachTimeOut		= 0xff00,				\
-+	.wTransferSize		= CONFIG_USBD_DFU_XFER_SIZE,		\
-+	.bcdDFUVersion		= 0x0100,				\
-+}
-+
-+/* USB Interface descriptor in Runtime mode */
-+#define DFU_RT_IF_DESC	{						\
-+	.bLength		= USB_DT_INTERFACE_SIZE,		\
-+	.bDescriptorType	= USB_DT_INTERFACE,			\
-+	.bInterfaceNumber	= CONFIG_USBD_DFU_INTERFACE,		\
-+	.bAlternateSetting	= 0x00,					\
-+	.bNumEndpoints		= 0x00,					\
-+	.bInterfaceClass	= 0xfe,					\
-+	.bInterfaceSubClass	= 0x01,					\
-+	.bInterfaceProtocol	= 0x01,					\
-+	.iInterface		= DFU_STR_CONFIG,			\
-+}
-+
-+#define ARRAY_SIZE(x)           (sizeof(x) / sizeof((x)[0]))
-+
-+#define DFU_NUM_ALTERNATES	6
-+
-+#define DFU_STR_MANUFACTURER	STR_MANUFACTURER
-+#define DFU_STR_PRODUCT		STR_PRODUCT
-+#define DFU_STR_SERIAL		STR_SERIAL
-+#define DFU_STR_CONFIG		(STR_COUNT)
-+#define DFU_STR_ALT0		(STR_COUNT+1)
-+#define DFU_STR_ALT1		(STR_COUNT+2)
-+#define DFU_STR_ALT2		(STR_COUNT+3)
-+#define DFU_STR_ALT3		(STR_COUNT+4)
-+#define DFU_STR_ALT4		(STR_COUNT+5)
-+#define DFU_STR_ALT5		(STR_COUNT+6)
-+#define DFU_STR_COUNT		(STR_COUNT+7)
-+
-+#define DFU_NUM_STRINGS		(STR_COUNT+8)
-+
-+#define CONFIG_DFU_CFG_STR	"USB Device Firmware Upgrade"
-+#define CONFIG_DFU_ALT0_STR	"RAM 0x32000000"
-+
-+struct _dfu_desc {
-+	struct usb_configuration_descriptor ucfg;
-+	struct usb_interface_descriptor uif[DFU_NUM_ALTERNATES];
-+	struct usb_dfu_func_descriptor func_dfu;
-+};
-+
-+int dfu_init_instance(struct usb_device_instance *dev);
-+
-+#define DFU_EP0_NONE		0
-+#define DFU_EP0_UNHANDLED	1
-+#define DFU_EP0_STALL		2
-+#define DFU_EP0_ZLP		3
-+#define DFU_EP0_DATA		4
-+
-+extern volatile enum dfu_state *system_dfu_state; /* for 3rd parties */
-+
-+int dfu_ep0_handler(struct urb *urb);
-+
-+void dfu_event(struct usb_device_instance *device,
-+	       usb_device_event_t event, int data);
-+
-+#endif /* _DFU_H */
-Index: u-boot/include/usb_dfu_descriptors.h
-===================================================================
---- /dev/null
-+++ u-boot/include/usb_dfu_descriptors.h
-@@ -0,0 +1,94 @@
-+#ifndef _USB_DFU_H
-+#define _USB_DFU_H
-+/* USB Device Firmware Update Implementation for OpenPCD
-+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
-+ *
-+ * Protocol definitions for USB DFU
-+ *
-+ * This ought to be compliant to the USB DFU Spec 1.0 as available from
-+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+
-+#define USB_DT_DFU			0x21
-+
-+struct usb_dfu_func_descriptor {
-+	u_int8_t		bLength;
-+	u_int8_t		bDescriptorType;
-+	u_int8_t		bmAttributes;
-+#define USB_DFU_CAN_DOWNLOAD	(1 << 0)
-+#define USB_DFU_CAN_UPLOAD	(1 << 1)
-+#define USB_DFU_MANIFEST_TOL	(1 << 2)
-+#define USB_DFU_WILL_DETACH	(1 << 3)
-+	u_int16_t		wDetachTimeOut;
-+	u_int16_t		wTransferSize;
-+	u_int16_t		bcdDFUVersion;
-+} __attribute__ ((packed));
-+
-+#define USB_DT_DFU_SIZE			9
-+
-+#define USB_TYPE_DFU		(USB_TYPE_CLASS|USB_RECIP_INTERFACE)
-+
-+/* DFU class-specific requests (Section 3, DFU Rev 1.1) */
-+#define USB_REQ_DFU_DETACH	0x00
-+#define USB_REQ_DFU_DNLOAD	0x01
-+#define USB_REQ_DFU_UPLOAD	0x02
-+#define USB_REQ_DFU_GETSTATUS	0x03
-+#define USB_REQ_DFU_CLRSTATUS	0x04
-+#define USB_REQ_DFU_GETSTATE	0x05
-+#define USB_REQ_DFU_ABORT	0x06
-+
-+struct dfu_status {
-+	u_int8_t bStatus;
-+	u_int8_t bwPollTimeout[3];
-+	u_int8_t bState;
-+	u_int8_t iString;
-+} __attribute__((packed));
-+
-+#define DFU_STATUS_OK			0x00
-+#define DFU_STATUS_errTARGET		0x01
-+#define DFU_STATUS_errFILE		0x02
-+#define DFU_STATUS_errWRITE		0x03
-+#define DFU_STATUS_errERASE		0x04
-+#define DFU_STATUS_errCHECK_ERASED	0x05
-+#define DFU_STATUS_errPROG		0x06
-+#define DFU_STATUS_errVERIFY		0x07
-+#define DFU_STATUS_errADDRESS		0x08
-+#define DFU_STATUS_errNOTDONE		0x09
-+#define DFU_STATUS_errFIRMWARE		0x0a
-+#define DFU_STATUS_errVENDOR		0x0b
-+#define DFU_STATUS_errUSBR		0x0c
-+#define DFU_STATUS_errPOR		0x0d
-+#define DFU_STATUS_errUNKNOWN		0x0e
-+#define DFU_STATUS_errSTALLEDPKT	0x0f
-+
-+enum dfu_state {
-+	DFU_STATE_appIDLE		= 0,
-+	DFU_STATE_appDETACH		= 1,
-+	DFU_STATE_dfuIDLE		= 2,
-+	DFU_STATE_dfuDNLOAD_SYNC	= 3,
-+	DFU_STATE_dfuDNBUSY		= 4,
-+	DFU_STATE_dfuDNLOAD_IDLE	= 5,
-+	DFU_STATE_dfuMANIFEST_SYNC	= 6,
-+	DFU_STATE_dfuMANIFEST		= 7,
-+	DFU_STATE_dfuMANIFEST_WAIT_RST	= 8,
-+	DFU_STATE_dfuUPLOAD_IDLE	= 9,
-+	DFU_STATE_dfuERROR		= 10,
-+};
-+
-+#endif /* _USB_DFU_H */
-Index: u-boot/include/usbdcore.h
-===================================================================
---- u-boot.orig/include/usbdcore.h
-+++ u-boot/include/usbdcore.h
-@@ -33,6 +33,7 @@
- 
- #include <common.h>
- #include "usbdescriptors.h"
-+#include <usb_dfu_descriptors.h>
- 
- 
- #define MAX_URBS_QUEUED 5
-@@ -475,7 +476,11 @@
-  * function driver to inform it that data has arrived.
-  */
- 
-+#ifdef CONFIG_USBD_DFU
-+#define URB_BUF_SIZE (128+CONFIG_USBD_DFU_XFER_SIZE)
-+#else
- #define URB_BUF_SIZE 128 /* in linux we'd malloc this, but in u-boot we prefer static data */
-+#endif
- struct urb {
- 
- 	struct usb_endpoint_instance *endpoint;
-@@ -603,6 +608,12 @@
- 	unsigned long usbd_rxtx_timestamp;
- 	unsigned long usbd_last_rxtx_timestamp;
- 
-+#ifdef CONFIG_USBD_DFU
-+	const struct usb_device_descriptor *dfu_dev_desc;
-+	const struct _dfu_desc *dfu_cfg_desc;
-+	enum dfu_state dfu_state;
-+	u_int8_t dfu_status;
-+#endif
- };
- 
- /* Bus Interface configuration structure
-@@ -632,6 +643,8 @@
- extern char *usbd_device_requests[];
- extern char *usbd_device_descriptors[];
- 
-+extern struct usb_string_descriptor **usb_strings;
-+
- void urb_link_init (urb_link * ul);
- void urb_detach (struct urb *urb);
- urb_link *first_urb_link (urb_link * hd);
-Index: u-boot/drivers/usbtty.h
-===================================================================
---- u-boot.orig/drivers/usbtty.h
-+++ u-boot/drivers/usbtty.h
-@@ -71,4 +71,10 @@
- #define STR_CTRL_INTERFACE	0x06
- #define STR_COUNT		0x07
- 
-+#ifdef CONFIG_USBD_DFU
-+#define NUM_STRINGS		DFU_STR_COUNT
-+#else
-+#define NUM_STRINGS		STR_COUNT
-+#endif
-+
- #endif
-Index: u-boot/include/configs/qt2410.h
-===================================================================
---- u-boot.orig/include/configs/qt2410.h
-+++ u-boot/include/configs/qt2410.h
-@@ -199,7 +199,8 @@
- #define CONFIG_USBD_PRODUCT_NAME	"QT2410 Bootloader " U_BOOT_VERSION
- #define CONFIG_EXTRA_ENV_SETTINGS	"usbtty=cdc_acm\0"
- #define CONFIG_USBD_DFU			1
--#define CONFIG_USBD_DFU_XFER_SIZE	0x4000
-+#define CONFIG_USBD_DFU_XFER_SIZE	4096
-+#define CONFIG_USBD_DFU_INTERFACE	2
- 
- /*-----------------------------------------------------------------------
-  * Physical Memory Map
-Index: u-boot/tools/Makefile
-===================================================================
---- u-boot.orig/tools/Makefile
-+++ u-boot/tools/Makefile
-@@ -21,10 +21,10 @@
- # MA 02111-1307 USA
- #
- 
--BIN_FILES	= img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
-+BIN_FILES	= img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) mkudfu$(SFX)
- 
- OBJ_LINKS	= environment.o crc32.o
--OBJ_FILES	= img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o
-+OBJ_FILES	= img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o mkudfu.o
- 
- ifeq ($(ARCH),mips)
- BIN_FILES	+= inca-swap-bytes$(SFX)
-@@ -137,6 +137,10 @@
- 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
- 		$(STRIP) $@
- 
-+$(obj)mkudfu$(SFX):	$(obj)mkudfu.o
-+		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
-+		$(STRIP) $@
-+
- $(obj)ncb$(SFX):	$(obj)ncb.o
- 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
- 		$(STRIP) $@
-Index: u-boot/tools/mkudfu.c
-===================================================================
---- /dev/null
-+++ u-boot/tools/mkudfu.c
-@@ -0,0 +1,314 @@
-+/*
-+ * USB DFU file trailer tool
-+ * (C) Copyright by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on mkimage.c, copyright information as follows:
-+ *
-+ * (C) Copyright 2000-2004
-+ * DENX Software Engineering
-+ * Wolfgang Denk, wd@denx.de
-+ * All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <errno.h>
-+#include <fcntl.h>
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#ifndef __WIN32__
-+#include <netinet/in.h>		/* for host / network byte order conversions	*/
-+#endif
-+#include <sys/mman.h>
-+#include <sys/stat.h>
-+#include <time.h>
-+#include <unistd.h>
-+
-+#if defined(__BEOS__) || defined(__NetBSD__) || defined(__APPLE__)
-+#include <inttypes.h>
-+#endif
-+
-+#ifdef __WIN32__
-+typedef unsigned int __u32;
-+
-+#define SWAP_LONG(x) \
-+	((__u32)( \
-+		(((__u32)(x) & (__u32)0x000000ffUL) << 24) | \
-+		(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) | \
-+		(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) | \
-+		(((__u32)(x) & (__u32)0xff000000UL) >> 24) ))
-+typedef		unsigned char	uint8_t;
-+typedef		unsigned short	uint16_t;
-+typedef		unsigned int	uint32_t;
-+
-+#define     ntohl(a)	SWAP_LONG(a)
-+#define     htonl(a)	SWAP_LONG(a)
-+#endif	/* __WIN32__ */
-+
-+#ifndef	O_BINARY		/* should be define'd on __WIN32__ */
-+#define O_BINARY	0
-+#endif
-+
-+#include <usb_dfu_trailer.h>
-+
-+extern int errno;
-+
-+#ifndef MAP_FAILED
-+#define MAP_FAILED (-1)
-+#endif
-+
-+static char *cmdname;
-+
-+static char *datafile;
-+static char *imagefile;
-+
-+
-+static void usage()
-+{
-+	fprintf (stderr, "%s - create / display u-boot DFU trailer\n", cmdname);
-+	fprintf (stderr, "Usage: %s -l image\n"
-+			 "          -l ==> list image header information\n"
-+			 "       %s -v VID -p PID -r REV -d data_file image\n",
-+		cmdname, cmdname);
-+	fprintf (stderr, "          -v ==> set vendor ID to 'VID'\n"
-+			 "          -p ==> set product ID system to 'PID'\n"
-+			 "          -r ==> set hardware revision to 'REV'\n"
-+			 "          -d ==> use 'data_file' as input file\n"
-+		);
-+	exit (EXIT_FAILURE);
-+}
-+
-+static void print_trailer(struct uboot_dfu_trailer *trailer)
-+{
-+	printf("===> DFU Trailer information:\n");
-+	printf("Trailer Vers.:	%d\n", trailer->version);
-+	printf("Trailer Length:	%d\n", trailer->length);
-+	printf("VendorID:	0x%04x\n", trailer->vendor);
-+	printf("ProductID:	0x%04x\n", trailer->product);
-+	printf("HW Revision:	0x%04x\n", trailer->revision);
-+}
-+
-+static void copy_file (int ifd, const char *datafile, int pad)
-+{
-+	int dfd;
-+	struct stat sbuf;
-+	unsigned char *ptr;
-+	int tail;
-+	int zero = 0;
-+	int offset = 0;
-+	int size;
-+
-+	if ((dfd = open(datafile, O_RDONLY|O_BINARY)) < 0) {
-+		fprintf (stderr, "%s: Can't open %s: %s\n",
-+			cmdname, datafile, strerror(errno));
-+		exit (EXIT_FAILURE);
-+	}
-+
-+	if (fstat(dfd, &sbuf) < 0) {
-+		fprintf (stderr, "%s: Can't stat %s: %s\n",
-+			cmdname, datafile, strerror(errno));
-+		exit (EXIT_FAILURE);
-+	}
-+
-+	ptr = (unsigned char *)mmap(0, sbuf.st_size,
-+				    PROT_READ, MAP_SHARED, dfd, 0);
-+	if (ptr == (unsigned char *)MAP_FAILED) {
-+		fprintf (stderr, "%s: Can't read %s: %s\n",
-+			cmdname, datafile, strerror(errno));
-+		exit (EXIT_FAILURE);
-+	}
-+
-+	size = sbuf.st_size - offset;
-+	if (write(ifd, ptr + offset, size) != size) {
-+		fprintf (stderr, "%s: Write error on %s: %s\n",
-+			cmdname, imagefile, strerror(errno));
-+		exit (EXIT_FAILURE);
-+	}
-+
-+	if (pad && ((tail = size % 4) != 0)) {
-+
-+		if (write(ifd, (char *)&zero, 4-tail) != 4-tail) {
-+			fprintf (stderr, "%s: Write error on %s: %s\n",
-+				cmdname, imagefile, strerror(errno));
-+			exit (EXIT_FAILURE);
-+		}
-+	}
-+
-+	(void) munmap((void *)ptr, sbuf.st_size);
-+	(void) close (dfd);
-+}
-+
-+
-+int main(int argc, char **argv)
-+{
-+	int ifd;
-+	int lflag = 0;
-+	struct stat sbuf;
-+	u_int16_t opt_vendor, opt_product, opt_revision;
-+	struct uboot_dfu_trailer _hdr, _mirror, *hdr = &_hdr;
-+
-+	opt_vendor = opt_product = opt_revision = 0;
-+
-+	cmdname = *argv;
-+
-+	while (--argc > 0 && **++argv == '-') {
-+		while (*++*argv) {
-+			switch (**argv) {
-+			case 'l':
-+				lflag = 1;
-+				break;
-+			case 'v':
-+				if (--argc <= 0)
-+					usage ();
-+				opt_vendor = strtoul(*++argv, NULL, 16);
-+				goto NXTARG;
-+			case 'p':
-+				if (--argc <= 0)
-+					usage ();
-+				opt_product = strtoul(*++argv, NULL, 16);
-+				goto NXTARG;
-+			case 'r':
-+				if (--argc <= 0)
-+					usage ();
-+				opt_revision = strtoul(*++argv, NULL, 16);
-+				goto NXTARG;
-+			case 'd':
-+				if (--argc <= 0)
-+					usage ();
-+				datafile = *++argv;
-+				goto NXTARG;
-+			case 'h':
-+				usage();
-+				break;
-+			default:
-+				usage();
-+			}
-+		}
-+NXTARG:		;
-+	}
-+
-+	if (argc != 1)
-+		usage();
-+
-+	imagefile = *argv;
-+
-+	if (lflag)
-+		ifd = open(imagefile, O_RDONLY|O_BINARY);
-+	else
-+		ifd = open(imagefile, O_RDWR|O_CREAT|O_TRUNC|O_BINARY, 0666);
-+
-+	if (ifd < 0) {
-+		fprintf (stderr, "%s: Can't open %s: %s\n",
-+			cmdname, imagefile, strerror(errno));
-+		exit (EXIT_FAILURE);
-+	}
-+
-+	if (lflag) {
-+		unsigned char *ptr;
-+		/* list header information of existing image */
-+		if (fstat(ifd, &sbuf) < 0) {
-+			fprintf (stderr, "%s: Can't stat %s: %s\n",
-+				cmdname, imagefile, strerror(errno));
-+			exit (EXIT_FAILURE);
-+		}
-+
-+		if ((unsigned)sbuf.st_size < sizeof(struct uboot_dfu_trailer)) {
-+			fprintf (stderr,
-+				"%s: Bad size: \"%s\" is no valid image\n",
-+				cmdname, imagefile);
-+			exit (EXIT_FAILURE);
-+		}
-+
-+		ptr = (unsigned char *)mmap(0, sbuf.st_size,
-+					    PROT_READ, MAP_SHARED, ifd, 0);
-+		if ((caddr_t)ptr == (caddr_t)-1) {
-+			fprintf (stderr, "%s: Can't read %s: %s\n",
-+				cmdname, imagefile, strerror(errno));
-+			exit (EXIT_FAILURE);
-+		}
-+
-+		dfu_trailer_mirror(hdr, ptr+sbuf.st_size);
-+
-+		if (hdr->magic != UBOOT_DFU_TRAILER_MAGIC) {
-+			fprintf (stderr,
-+				"%s: Bad Magic Number: \"%s\" is no valid image\n",
-+				cmdname, imagefile);
-+			exit (EXIT_FAILURE);
-+		}
-+
-+		/* for multi-file images we need the data part, too */
-+		print_trailer(hdr);
-+
-+		(void) munmap((void *)ptr, sbuf.st_size);
-+		(void) close (ifd);
-+
-+		exit (EXIT_SUCCESS);
-+	}
-+
-+	/* if we're not listing: */
-+
-+	copy_file (ifd, datafile, 0);
-+
-+	memset (hdr, 0, sizeof(struct uboot_dfu_trailer));
-+
-+	/* Build new header */
-+	hdr->version	= UBOOT_DFU_TRAILER_V1;
-+	hdr->magic	= UBOOT_DFU_TRAILER_MAGIC;
-+	hdr->length	= sizeof(struct uboot_dfu_trailer);
-+	hdr->vendor	= opt_vendor;
-+	hdr->product	= opt_product;
-+	hdr->revision	= opt_revision;
-+
-+	print_trailer(hdr);
-+	dfu_trailer_mirror(&_mirror, (unsigned char *)hdr+sizeof(*hdr));
-+
-+	if (write(ifd, &_mirror, sizeof(struct uboot_dfu_trailer))
-+					!= sizeof(struct uboot_dfu_trailer)) {
-+		fprintf (stderr, "%s: Write error on %s: %s\n",
-+			cmdname, imagefile, strerror(errno));
-+		exit (EXIT_FAILURE);
-+	}
-+
-+	/* We're a bit of paranoid */
-+#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__)
-+	(void) fdatasync (ifd);
-+#else
-+	(void) fsync (ifd);
-+#endif
-+
-+	if (fstat(ifd, &sbuf) < 0) {
-+		fprintf (stderr, "%s: Can't stat %s: %s\n",
-+			cmdname, imagefile, strerror(errno));
-+		exit (EXIT_FAILURE);
-+	}
-+
-+	/* We're a bit of paranoid */
-+#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__)
-+	(void) fdatasync (ifd);
-+#else
-+	(void) fsync (ifd);
-+#endif
-+
-+	if (close(ifd)) {
-+		fprintf (stderr, "%s: Write error on %s: %s\n",
-+			cmdname, imagefile, strerror(errno));
-+		exit (EXIT_FAILURE);
-+	}
-+
-+	exit (EXIT_SUCCESS);
-+}
-Index: u-boot/include/usb_dfu_trailer.h
-===================================================================
---- /dev/null
-+++ u-boot/include/usb_dfu_trailer.h
-@@ -0,0 +1,31 @@
-+#ifndef _USB_DFU_TRAILER_H
-+#define _USB_DFU_TRAILER_H
-+
-+/* trailer handling for DFU files */
-+
-+#define UBOOT_DFU_TRAILER_V1	1
-+#define UBOOT_DFU_TRAILER_MAGIC	0x19731978
-+struct uboot_dfu_trailer {
-+	u_int32_t	magic;
-+	u_int16_t	version;
-+	u_int16_t	length;
-+	u_int16_t	vendor;
-+	u_int16_t	product;
-+	u_int32_t	revision;
-+} __attribute__((packed));
-+
-+/* we mirror the trailer because we want it to be longer in later versions
-+ * while keeping backwards compatibility */
-+static inline void dfu_trailer_mirror(struct uboot_dfu_trailer *trailer,
-+				      unsigned char *eof)
-+{
-+	int i;
-+	int len = sizeof(struct uboot_dfu_trailer);
-+	unsigned char *src = eof - len;
-+	unsigned char *dst = (unsigned char *) trailer;
-+
-+	for (i = 0; i < len; i++)
-+		dst[len-1-i] = src[i];
-+}
-+
-+#endif /* _USB_DFU_TRAILER_H */
-Index: u-boot/Makefile
-===================================================================
---- u-boot.orig/Makefile
-+++ u-boot/Makefile
-@@ -261,6 +261,12 @@
- $(obj)u-boot.bin:	$(obj)u-boot
- 		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
- 
-+$(obj)u-boot.udfu:	$(obj)u-boot.bin
-+		./tools/mkudfu -v $(CONFIG_USB_DFU_VENDOR) \
-+			       -p $(CONFIG_USB_DFU_PRODUCT) \
-+			       -r $(CONFIG_USB_DFU_REVISION) \
-+			       -d $< $@
-+
- $(obj)u-boot.img:	$(obj)u-boot.bin
- 		./tools/mkimage -A $(ARCH) -T firmware -C none \
- 		-a $(TEXT_BASE) -e 0 \
-Index: u-boot/board/neo1973/gta01/split_by_variant.sh
-===================================================================
---- u-boot.orig/board/neo1973/gta01/split_by_variant.sh
-+++ u-boot/board/neo1973/gta01/split_by_variant.sh
-@@ -15,37 +15,44 @@
- 	echo "$0:: No parameters - using GTA01Bv3 config"
- 	echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC
- 	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	echo "CONFIG_USB_DFU_REVISION=0x0230" > $CFGTMP
- else
- 	case "$1" in
- 	gta01v4_config)
- 	echo "#define CONFIG_ARCH_GTA01_v4" > $CFGINC
- 	echo "GTA01_BIG_RAM=n" > $CFGTMP
-+	echo "CONFIG_USB_DFU_REVISION=0x0140" > $CFGTMP
- 	;;
- 
- 	gta01v3_config)
- 	echo "#define CONFIG_ARCH_GTA01_v3" > $CFGINC
- 	echo "GTA01_BIG_RAM=n" > $CFGTMP
-+	echo "CONFIG_USB_DFU_REVISION=0x0130" > $CFGTMP
- 	;;
- 
- 	gta01bv2_config)
- 	echo "#define CONFIG_ARCH_GTA01B_v2" > $CFGINC
- 	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	echo "CONFIG_USB_DFU_REVISION=0x0220" > $CFGTMP
- 	;;
- 
- 	gta01bv3_config)
- 	echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC
- 	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	echo "CONFIG_USB_DFU_REVISION=0x0230" > $CFGTMP
- 	;;
- 
- 	gta01bv4_config)
- 	echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC
- 	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	echo "CONFIG_USB_DFU_REVISION=0x0240" > $CFGTMP
- 	;;
- 
- 	*)
- 	echo "$0:: Unrecognised config - using GTA01Bv4 config"
- 	echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC
- 	echo "GTA01_BIG_RAM=y" > $CFGTMP
-+	echo "CONFIG_USB_DFU_REVISION=0x0240" > $CFGTMP
- 	;;
- 
- 	esac
-Index: u-boot/board/neo1973/gta01/config.mk
-===================================================================
---- u-boot.orig/board/neo1973/gta01/config.mk
-+++ u-boot/board/neo1973/gta01/config.mk
-@@ -24,6 +24,9 @@
- #
- # download area is 3200'0000 or 3300'0000
- 
-+CONFIG_USB_DFU_VENDOR=0x1457
-+CONFIG_USB_DFU_PRODUCT=0x5119
-+
- sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
- 
- ifeq ($(GTA01_BIG_RAM),y)
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-gta02.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-gta02.patch
deleted file mode 100644
index ad6b612012..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-gta02.patch
+++ /dev/null
@@ -1,1560 +0,0 @@
-Add support for new GTA02 version of Neo1973
-
-Index: u-boot/Makefile
-===================================================================
---- u-boot.orig/Makefile
-+++ u-boot/Makefile
-@@ -2038,6 +2038,10 @@
- sbc2410x_config: unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
- 
-+gta02_config \
-+gta02v1_config :	unconfig
-+	@sh board/neo1973/gta02/split_by_variant.sh $@
-+
- gta01_config \
- gta01v3_config \
- gta01bv2_config \
-Index: u-boot/board/neo1973/gta02/Makefile
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta02/Makefile
-@@ -0,0 +1,64 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= lib$(BOARD).a
-+
-+OBJS	:= gta02.o pcf50633.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o
-+SOBJS	:= ../common/lowlevel_init.o
-+
-+.PHONY:	all
-+
-+all:	$(LIB) lowevel_foo.bin
-+
-+$(LIB):	$(OBJS) $(SOBJS)
-+	$(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+lowlevel_foo.o:	../common/lowlevel_foo.S
-+	$(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \
-+	  -o lowlevel_foo.o ../common/lowlevel_foo.S
-+
-+lowlevel_foo:	lowlevel_foo.o ../common/lowlevel_init.o ../common/lowlevel_foo.lds
-+	$(LD) -T ../common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \
-+	  ../common/lowlevel_init.o lowlevel_foo.o -o lowlevel_foo
-+
-+lowevel_foo.bin:	lowlevel_foo
-+	$(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \
-+	  lowlevel_foo lowlevel_foo.bin
-+
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend lowlevel_foo.bin
-+
-+#########################################################################
-+
-+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-Index: u-boot/board/neo1973/gta02/gta02.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta02/gta02.c
-@@ -0,0 +1,313 @@
-+/*
-+ * (C) 2006-2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on existing S3C2410 startup code in u-boot:
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2440.h>
-+#include <i2c.h>
-+
-+#include "../common/neo1973.h"
-+#include "../common/jbt6k74.h"
-+
-+#include "pcf50633.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* That many seconds the power key needs to be pressed to power up */
-+#define POWER_KEY_SECONDS	2
-+
-+#define M_MDIV	0x7f		/* Fout = 405.00MHz */
-+#define M_PDIV	0x2
-+#define M_SDIV	0x1
-+
-+#define U_M_MDIV	0x38
-+#define U_M_PDIV	0x2
-+#define U_M_SDIV	0x2
-+
-+unsigned int neo1973_wakeup_cause;
-+extern int nobootdelay;
-+
-+static inline void delay (unsigned long loops)
-+{
-+	__asm__ volatile ("1:\n"
-+	  "subs %0, %1, #1\n"
-+	  "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	/* to reduce PLL lock time, adjust the LOCKTIME register */
-+	clk_power->LOCKTIME = 0xFFFFFF;
-+
-+	/* configure MPLL */
-+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (4000);
-+
-+	/* configure UPLL */
-+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (8000);
-+
-+	/* set up the I/O ports */
-+#if defined(CONFIG_ARCH_GTA02_v1)
-+	gpio->GPACON = 0x007E1FFF;
-+	gpio->GPADAT |= (1 << 16);      /* Set GPA16 to high (nNAND_WP) */
-+
-+	gpio->GPBCON = 0x00155555;
-+	gpio->GPBUP = 0x000007FF;
-+
-+	gpio->GPCCON = 0x55551155;
-+	gpio->GPCUP = 0x0000FFFF;
-+
-+	gpio->GPDCON = 0x55555555;
-+	gpio->GPDUP = 0x0000FFFF;
-+
-+	gpio->GPECON = 0xAAAAAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+
-+	gpio->GPFCON = 0x0000AAAA;
-+	gpio->GPFUP = 0x000000FF;
-+
-+	gpio->GPGCON = 0x013DFDFA;
-+	gpio->GPGUP = 0x0000FFFF;
-+
-+	gpio->GPHCON = 0x0028AAAA;
-+	gpio->GPHUP = 0x000007FF;
-+
-+	gpio->GPJCON = 0x1545541;
-+#else
-+#error Please define GTA02 version
-+#endif
-+
-+	/* arch number of SMDK2410-Board */
-+	gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA02;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0x30000100;
-+
-+	icache_enable();
-+	dcache_enable();
-+
-+	return 0;
-+}
-+
-+int board_late_init(void)
-+{
-+	extern unsigned char booted_from_nand;
-+	unsigned char tmp;
-+	char buf[32];
-+	int menu_vote = 0; /* <= 0: no, > 0: yes */
-+	int seconds = 0;
-+
-+	/* Initialize the Power Management Unit with a safe register set */
-+	pcf50633_init();
-+#if 0
-+	/* if there's no other reason, must be regular reset */
-+	neo1973_wakeup_cause = NEO1973_WAKEUP_RESET;
-+
-+	if (!booted_from_nand)
-+		goto woken_by_reset;
-+
-+	/* obtain wake-up reason, save INT1 in environment */
-+	tmp = pcf50606_reg_read(PCF50606_REG_INT1);
-+	sprintf(buf, "0x%02x", tmp);
-+	setenv("pcf50606_int1", buf);
-+
-+	if (tmp & PCF50606_INT1_ALARM) {
-+		/* we've been woken up by RTC alarm, boot */
-+		neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM;
-+		goto continue_boot;
-+	}
-+	if (tmp & PCF50606_INT1_EXTONR) {
-+		/* we've been woken up by charger insert */
-+		neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER;
-+	}
-+
-+	if (tmp & PCF50606_INT1_ONKEYF) {
-+		/* we've been woken up by a falling edge of the onkey */
-+		neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY;
-+	}
-+
-+	if (neo1973_wakeup_cause == NEO1973_WAKEUP_CHARGER) {
-+		/* if we still think it was only a charger insert, boot */
-+		goto continue_boot;
-+	}
-+
-+woken_by_reset:
-+
-+	while (neo1973_wakeup_cause == NEO1973_WAKEUP_RESET ||
-+	    neo1973_on_key_pressed()) {
-+		if (neo1973_aux_key_pressed())
-+			menu_vote++;
-+		else
-+			menu_vote--;
-+
-+		if (neo1973_new_second())
-+			seconds++;
-+		if (seconds >= POWER_KEY_SECONDS)
-+			goto continue_boot;
-+	}
-+	/* Power off if minimum number of seconds not reached */
-+	neo1973_poweroff();
-+
-+continue_boot:
-+	jbt6k74_init();
-+	jbt6k74_enter_state(JBT_STATE_NORMAL);
-+	jbt6k74_display_onoff(1);
-+#endif
-+
-+	/* issue a short pulse with the vibrator */
-+	neo1973_vibrator(1);
-+	udelay(50000);
-+	neo1973_vibrator(0);
-+
-+	/* switch on the backlight */
-+	neo1973_backlight(1);
-+
-+#if 0
-+	{
-+		/* check if sd card is inserted, and power-up if it is */
-+		S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+		if (!(gpio->GPFDAT & (1 << 5)))
-+			gpio->GPBDAT &= ~(1 << 2);
-+	}
-+
-+	if (menu_vote > 0) {
-+		bootmenu();
-+		nobootdelay = 1;
-+	}
-+#endif
-+
-+	return 0;
-+}
-+
-+int dram_init (void)
-+{
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+	return 0;
-+}
-+
-+u_int32_t get_board_rev(void)
-+{
-+#if defined(CONFIG_ARCH_GTA02_v1)
-+	return 0x00000310;
-+#endif
-+}
-+
-+void neo1973_poweroff(void)
-+{
-+	printf("poweroff\n");
-+	udc_disconnect();
-+	pcf50633_reg_write(PCF50633_REG_OOCSHDWN, 0x01);
-+	/* don't return to caller */
-+	while (1) ;
-+}
-+
-+void neo1973_backlight(int on)
-+{
-+	/* FIXME: PMU based implementation */
-+}
-+
-+/* FIXME: shared */
-+void neo1973_vibrator(int on)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+	if (on)
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+		gpio->GPGDAT |= (1 << 11);	/* GPG11 */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+		gpio->GPBDAT |= (1 << 10);	/* GPB10 */
-+#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1)
-+		gpio->GPBDAT |= (1 << 3);	/* GPB3 */
-+#endif
-+	else
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+		gpio->GPGDAT &= ~(1 << 11);	/* GPG11 */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+		gpio->GPBDAT &= ~(1 << 10);	/* GPB10 */
-+#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1)
-+		gpio->GPBDAT &= ~(1 << 3);	/* GPB3 */
-+#endif
-+}
-+
-+int neo1973_new_second(void)
-+{
-+	return pcf50633_reg_read(PCF50633_REG_INT1) & PCF50633_INT1_SECOND;
-+}
-+
-+int neo1973_on_key_pressed(void)
-+{
-+	return !(pcf50633_reg_read(PCF50633_REG_OOCSTAT)
-+						& PCF50633_OOCSTAT_ONKEY);
-+}
-+
-+/* FIXME: shared */
-+int neo1973_aux_key_pressed(void)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+	if (gpio->GPFDAT & (1 << 6))
-+		return 0;
-+	return 1;
-+}
-+
-+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000.
-+   "initrd" is sized such that it can hold two uncompressed 16 bit 640*480
-+   images: 640*480*2*2 = 1228800 < 1245184. */
-+
-+unsigned int dynpart_size[] = {
-+    CFG_UBOOT_SIZE, CFG_ENV_SIZE, 0x200000, 0xa0000, 0x1fce0000, 0 };
-+char *dynpart_names[] = {
-+    "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL };
-+
-+
-+const char *neo1973_get_charge_status(void)
-+{
-+	/* FIXME */
-+	return "unknown";
-+}
-+
-+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd)
-+{
-+	/* FIXME */
-+	return 0;
-+}
-Index: u-boot/board/neo1973/gta02/u-boot.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta02/u-boot.lds
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/arm920t/start.o	(.text)
-+	  cpu/arm920t/s3c24x0/nand_read.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/include/configs/neo1973_gta02.h
-===================================================================
---- /dev/null
-+++ u-boot/include/configs/neo1973_gta02.h
-@@ -0,0 +1,276 @@
-+/*
-+ * (C) Copyright 2007 Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * Configuation settings for the FIC Neo1973 GTA02 Linux GSM phone
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/* we want to be able to start u-boot directly from within NAND flash */
-+#define CONFIG_LL_INIT_NAND_ONLY
-+#define CONFIG_S3C2410_NAND_BOOT	1
-+#define CONFIG_S3C2410_NAND_SKIP_BAD	1
-+
-+#define CFG_UBOOT_SIZE		0x40000 /* size of u-boot, for NAND loading */
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_S3C2440		1	/* in a SAMSUNG S3C2410 SoC     */
-+#define CONFIG_SMDK2440		1	/* on a SAMSUNG SMDK2410 Board  */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ	12000000/* the GTA02 has this input clock */
-+
-+
-+#define USE_920T_MMU		1
-+#define CONFIG_USE_IRQ		1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 400*1024)
-+					/* >> CFG_VIDEO_LOGO_MAX_SIZE */
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL3          1	/* we use SERIAL 1 on GTA01 */
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define	CONFIG_RTC_S3C24X0	1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE		115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS (\
-+			CFG_CMD_BDI	 | \
-+			CFG_CMD_LOADS	 | \
-+			CFG_CMD_LAODB	 | \
-+			CFG_CMD_IMI	 | \
-+			CFG_CMD_CACHE	 | \
-+			CFG_CMD_MEMORY	 | \
-+			CFG_CMD_ENV	 | \
-+			/* CFG_CMD_IRQ	 | */  \
-+			CFG_CMD_BOOTD	 | \
-+			CFG_CMD_CONSOLE	 | \
-+			/* CFG_CMD_BMP	 | */ \
-+			CFG_CMD_ASKENV	 | \
-+			CFG_CMD_RUN	 | \
-+			CFG_CMD_ECHO	 | \
-+			CFG_CMD_I2C	 | \
-+			CFG_CMD_REGINFO	 | \
-+			CFG_CMD_IMMAP	 | \
-+			CFG_CMD_DATE	 | \
-+			CFG_CMD_AUTOSCRIPT | \
-+			CFG_CMD_BSP	 | \
-+			CFG_CMD_ELF	 | \
-+			CFG_CMD_MISC	 | \
-+			/* CFG_CMD_USB	 | */ \
-+			CFG_CMD_JFFS2	 | \
-+			CFG_CMD_DIAG	 | \
-+			/* CFG_CMD_HWFLOW	 | */ \
-+			CFG_CMD_SAVES	 | \
-+			CFG_CMD_NAND	 | \
-+			CFG_CMD_PORTIO	 | \
-+			CFG_CMD_MMC	 | \
-+			CFG_CMD_FAT	 | \
-+			CFG_CMD_EXT2	 | \
-+			0)
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY	3
-+#define CONFIG_BOOTARGS    	""
-+#define CONFIG_BOOTCOMMAND	"setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION	1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define	CFG_LONGHELP				/* undef to save memory		*/
-+#if defined(CONFIG_ARCH_GTA02_v1)
-+#define	CFG_PROMPT		"GTA02v1 # "	/* Monitor Command Prompt	*/
-+#endif
-+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define	CFG_MAXARGS		64		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+
-+#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
-+
-+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define	CFG_LOAD_ADDR		0x33000000	/* default load address	*/
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define	CFG_HZ			1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+#define CFG_BOOTMENU
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(8*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+#if 0
-+#define CONFIG_USB_OHCI		1
-+#endif
-+
-+#define CONFIG_USB_DEVICE	1
-+#define CONFIG_USB_TTY		1
-+#define CFG_CONSOLE_IS_IN_ENV	1
-+#define CONFIG_USBD_VENDORID 		0x1457     /* Linux/NetChip */
-+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x5120    /* gserial */
-+#define CONFIG_USBD_PRODUCTID_CDCACM 	0x5119    /* CDC ACM */
-+#define CONFIG_USBD_MANUFACTURER	"Openmoko, Inc"
-+#define CONFIG_USBD_PRODUCT_NAME	"Neo1973 Bootloader " U_BOOT_VERSION
-+#define CONFIG_USBD_DFU			1
-+#define CONFIG_USBD_DFU_XFER_SIZE 	4096	/* 0x4000 */
-+#define CONFIG_USBD_DFU_INTERFACE	2
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS 					\
-+	"usbtty=cdc_acm\0"						\
-+	"bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8\0" \
-+	""
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x08000000 /* 128 MB */
-+#define PHYS_SDRAM_RES_SIZE	0x00200000 /* 2 MB for frame buffer */
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+/* No NOR flash in this device */
-+#define CFG_NO_FLASH		1
-+
-+#define	CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_SIZE		0x40000	/* 128k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET_OOB	1	/* Location of ENV stored in block 0 OOB */
-+#define	CFG_PREBOOT_OVERRIDE	1	/* allow preboot from memory */
-+
-+#define NAND_MAX_CHIPS		1
-+#define CFG_NAND_BASE		0x4e000000
-+#define CFG_MAX_NAND_DEVICE	1
-+
-+#define CONFIG_MMC		1
-+#define CFG_MMC_BASE		0xff000000
-+
-+/* EXT2 driver */
-+#define CONFIG_EXT2		1
-+
-+#define CONFIG_FAT		1
-+#define CONFIG_SUPPORT_VFAT
-+
-+#if 1
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_CMDLINE	1
-+#define CONFIG_JFFS2_NAND	1
-+#define CONFIG_JFFS2_NAND_DEV	0
-+//#define CONFIG_JFFS2_NAND_OFF	0x634000
-+//#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
-+#endif
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_CMDLINE_TAG		1
-+#define CONFIG_REVISION_TAG		1
-+#if 0
-+#define CONFIG_SERIAL_TAG		1
-+#endif
-+
-+#define CONFIG_DRIVER_S3C24X0_I2C	1
-+#define CONFIG_HARD_I2C			1
-+#define CFG_I2C_SPEED			400000	/* 400kHz according to PCF50633 data sheet */
-+#define CFG_I2C_SLAVE			0x7f
-+
-+/* we have a board_late_init() function */
-+#define BOARD_LATE_INIT			1
-+
-+#if 0
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_SPLASH_SCREEN
-+#define CFG_VIDEO_LOGO_MAX_SIZE	(640*480+1024+100) /* 100 = slack */
-+#define CONFIG_VIDEO_BMP_GZIP
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+#define CONFIG_UNZIP
-+
-+#define VIDEO_KBD_INIT_FCT	0
-+#define VIDEO_TSTC_FCT		serial_tstc
-+#define VIDEO_GETC_FCT		serial_getc
-+
-+#define LCD_VIDEO_ADDR		0x33d00000
-+#endif
-+
-+#define CONFIG_S3C2410_NAND_BBT                1
-+//#define CONFIG_S3C2410_NAND_HWECC              1
-+
-+#define CONFIG_DRIVER_PCF50633		1
-+
-+#define MTDIDS_DEFAULT	"nand0=neo1973-nand"
-+#define MTPARTS_DEFAULT	"neo1973-nand:256k(u-boot),128k(u-boot_env),2M(kernel),640k(splash),-(jffs2)"
-+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand"
-+#define CONFIG_NAND_DYNPART
-+
-+#endif	/* __CONFIG_H */
-Index: u-boot/board/neo1973/gta02/split_by_variant.sh
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta02/split_by_variant.sh
-@@ -0,0 +1,37 @@
-+#!/bin/sh
-+# ---------------------------------------------------------
-+#  Set the core module defines according to Core Module
-+# ---------------------------------------------------------
-+# ---------------------------------------------------------
-+# Set up the GTA01 type define
-+# ---------------------------------------------------------
-+
-+CFGINC=${obj}include/config.h
-+CFGTMP=${obj}board/neo1973/gta02/config.tmp
-+
-+mkdir -p ${obj}include
-+if [ "$1" == "" ]
-+then
-+	echo "$0:: No parameters - using GTA02Bv1 config"
-+	echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC
-+	echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP
-+else
-+	case "$1" in
-+	gta02v1_config)
-+	echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC
-+	echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP
-+	;;
-+
-+	*)
-+	echo "$0:: Unrecognised config - using GTA02v1 config"
-+	echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC
-+	echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP
-+	;;
-+
-+	esac
-+
-+fi
-+# ---------------------------------------------------------
-+# Complete the configuration
-+# ---------------------------------------------------------
-+$MKCONFIG -a neo1973_gta02 arm arm920t gta02 neo1973 s3c24x0
-Index: u-boot/include/pcf50633.h
-===================================================================
---- /dev/null
-+++ u-boot/include/pcf50633.h
-@@ -0,0 +1,235 @@
-+#ifndef _PCF50633_H
-+#define _PCF50633_H
-+
-+/* Philips PCF50633 Power Managemnt Unit (PMU) driver
-+ * (C) 2006-2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ */
-+
-+enum pfc50633_regs {
-+	PCF50633_REG_VERSION	= 0x00,
-+	PCF50633_REG_VARIANT	= 0x01,
-+	PCF50633_REG_INT1	= 0x02,	/* Interrupt Status */
-+	PCF50633_REG_INT2	= 0x03,	/* Interrupt Status */
-+	PCF50633_REG_INT3	= 0x04,	/* Interrupt Status */
-+	PCF50633_REG_INT4	= 0x05,	/* Interrupt Status */
-+	PCF50633_REG_INT5	= 0x06,	/* Interrupt Status */
-+	PCF50633_REG_INT1M	= 0x07,	/* Interrupt Mask */
-+	PCF50633_REG_INT2M	= 0x08,	/* Interrupt Mask */
-+	PCF50633_REG_INT3M	= 0x09,	/* Interrupt Mask */
-+	PCF50633_REG_INT4M	= 0x0a,	/* Interrupt Mask */
-+	PCF50633_REG_INT5M	= 0x0b,	/* Interrupt Mask */
-+	PCF50633_REG_OOCSHDWN	= 0x0c,
-+	PCF50633_REG_OOCWAKE	= 0x0d,
-+	PCF50633_REG_OOCTIM1	= 0x0e,
-+	PCF50633_REG_OOCTIM2	= 0x0f,
-+	PCF50633_REG_OOCMODE	= 0x10,
-+	PCF50633_REG_OOCCTL	= 0x11,
-+	PCF50633_REG_OOCSTAT	= 0x12,
-+	PCF50633_REG_GPIOCTL	= 0x13,
-+	PCF50633_REG_GPIO1CFG	= 0x14,
-+	PCF50633_REG_GPIO2CFG	= 0x15,
-+	PCF50633_REG_GPIO3CFG	= 0x16,
-+	PCF50633_REG_GPOCFG	= 0x17,
-+	PCF50633_REG_BVMCTL	= 0x18,
-+	PCF50633_REG_SVMCTL	= 0x19,
-+	PCF50633_REG_AUTOOUT	= 0x1a,
-+	PCF50633_REG_AUTOENA	= 0x1b,
-+	PCF50633_REG_AUTOCTL	= 0x1c,
-+	PCF50633_REG_AUTOMXC	= 0x1d,
-+	PCF50633_REG_DOWN1OUT	= 0x1e,
-+	PCF50633_REG_DOWN1ENA	= 0x1f,
-+	PCF50633_REG_DOWN1CTL	= 0x20,
-+	PCF50633_REG_DOWN1MXC	= 0x21,
-+	PCF50633_REG_DOWN2OUT	= 0x22,
-+	PCF50633_REG_DOWN2ENA	= 0x23,
-+	PCF50633_REG_DOWN2CTL	= 0x24,
-+	PCF50633_REG_DOWN2MXC	= 0x25,
-+	PCF50633_REG_MEMLDOOUT	= 0x26,
-+	PCF50633_REG_MEMLDOENA	= 0x27,
-+	PCF50633_REG_LEDOUT	= 0x28,
-+	PCF50633_REG_LEDENA	= 0x29,
-+	PCF50633_REG_LEDCTL	= 0x2a,
-+	PCF50633_REG_LEDDIM	= 0x2b,
-+	/* reserved */
-+	PCF50633_REG_LDO1OUT	= 0x2d,
-+	PCF50633_REG_LDO1ENA	= 0x2e,
-+	PCF50633_REG_LDO2OUT	= 0x2f,
-+	PCF50633_REG_LDO2ENA	= 0x30,
-+	PCF50633_REG_LDO3OUT	= 0x31,
-+	PCF50633_REG_LDO3ENA	= 0x32,
-+	PCF50633_REG_LDO4OUT	= 0x33,
-+	PCF50633_REG_LDO4ENA	= 0x34,
-+	PCF50633_REG_LDO5OUT	= 0x35,
-+	PCF50633_REG_LDO5ENA	= 0x36,
-+	PCF50633_REG_LDO6OUT	= 0x37,
-+	PCF50633_REG_LDO6ENA	= 0x38,
-+	PCF50633_REG_HCLDOOUT	= 0x39,
-+	PCF50633_REG_HCLDOENA	= 0x3a,
-+	PCF50633_REG_STBYCTL1	= 0x3b,
-+	PCF50633_REG_STBYCTL2	= 0x3c,
-+	PCF50633_REG_DEBPF1	= 0x3d,
-+	PCF50633_REG_DEBPF2	= 0x3e,
-+	PCF50633_REG_DEBPF3	= 0x3f,
-+	PCF50633_REG_HCLDOOVL	= 0x40,
-+	PCF50633_REG_DCDCSTAT	= 0x41,
-+	PCF50633_REG_LDOSTAT	= 0x42,
-+	PCF50633_REG_MBCC1	= 0x43,
-+	PCF50633_REG_MBCC2	= 0x44,
-+	PCF50633_REG_MBCC3	= 0x45,
-+	PCF50633_REG_MBCC4	= 0x46,
-+	PCF50633_REG_MBCC5	= 0x47,
-+	PCF50633_REG_MBCC6	= 0x48,
-+	PCF50633_REG_MBCC7	= 0x49,
-+	PCF50633_REG_MBCC8	= 0x4a,
-+	PCF50633_REG_MBCS1	= 0x4b,
-+	PCF50633_REG_MBCS2	= 0x4c,
-+	PCF50633_REG_MBCS3	= 0x4d,
-+	PCF50633_REG_BBCCTL	= 0x4e,
-+	PCF50633_REG_ALMGAIN	= 0x4f,
-+	PCF50633_REG_ALMDATA	= 0x50,
-+	/* reserved */
-+	PCF50633_REG_ADCC3	= 0x52,
-+	PCF50633_REG_ADCC2	= 0x53,
-+	PCF50633_REG_ADCC1	= 0x54,
-+	PCF50633_REG_ADCS1	= 0x55,
-+	PCF50633_REG_ADCS2	= 0x56,
-+	PCF50633_REG_ADCS3	= 0x57,
-+	/* reserved */
-+	PCF50633_REG_RTCSC	= 0x59,	/* Second */
-+	PCF50633_REG_RTCMN	= 0x5a,	/* Minute */
-+	PCF50633_REG_RTCHR	= 0x5b,	/* Hour */
-+	PCF50633_REG_RTCWD	= 0x5c,	/* Weekday */
-+	PCF50633_REG_RTCDT	= 0x5d,	/* Day */
-+	PCF50633_REG_RTCMT	= 0x5e,	/* Month */
-+	PCF50633_REG_RTCYR	= 0x5f,	/* Year */
-+	PCF50633_REG_RTCSCA	= 0x60, /* Alarm Second */
-+	PCF50633_REG_RTCMNA	= 0x61, /* Alarm Minute */
-+	PCF50633_REG_RTCHRA	= 0x62, /* Alarm Hour */
-+	PCF50633_REG_RTCWDA	= 0x63, /* Alarm Weekday */
-+	PCF50633_REG_RTCDTA	= 0x64, /* Alarm Day */
-+	PCF50633_REG_RTCMTA	= 0x65, /* Alarm Month */
-+	PCF50633_REG_RTCYRA	= 0x66, /* Alarm Year */
-+
-+	PCF50633_REG_MEMBYTE0	= 0x67,
-+	PCF50633_REG_MEMBYTE1	= 0x68,
-+	PCF50633_REG_MEMBYTE2	= 0x69,
-+	PCF50633_REG_MEMBYTE3	= 0x6a,
-+	PCF50633_REG_MEMBYTE4	= 0x6b,
-+	PCF50633_REG_MEMBYTE5	= 0x6c,
-+	PCF50633_REG_MEMBYTE6	= 0x6d,
-+	PCF50633_REG_MEMBYTE7	= 0x6e,
-+	/* reserved */
-+	PCF50633_REG_DCDCPFM	= 0x84,
-+	__NUM_PCF50633_REGS
-+};
-+
-+enum pcf50633_reg_int1 {
-+	PCF50633_INT1_ADPINS	= 0x01,	/* Adapter inserted */
-+	PCF50633_INT1_ADPREM	= 0x02,	/* Adapter removed */
-+	PCF50633_INT1_USBINS	= 0x04,	/* USB inserted */
-+	PCF50633_INT1_USBREM	= 0x08,	/* USB removed */
-+	/* reserved */
-+	PCF50633_INT1_ALARM	= 0x40, /* RTC alarm time is reached */
-+	PCF50633_INT1_SECOND	= 0x80,	/* RTC periodic second interrupt */
-+};
-+
-+enum pcf50633_reg_int2 {
-+	PCF50633_INT2_ONKEYR	= 0x01, /* ONKEY rising edge */
-+	PCF50633_INT2_ONKEYF	= 0x02, /* ONKEY falling edge */
-+	PCF50633_INT2_EXTON1R	= 0x04, /* EXTON1 rising edge */
-+	PCF50633_INT2_EXTON1F	= 0x08, /* EXTON1 falling edge */
-+	PCF50633_INT2_EXTON2R	= 0x10, /* EXTON2 rising edge */
-+	PCF50633_INT2_EXTON2F	= 0x20, /* EXTON2 falling edge */
-+	PCF50633_INT2_EXTON3R	= 0x40, /* EXTON3 rising edge */
-+	PCF50633_INT2_EXTON3F	= 0x80, /* EXTON3 falling edge */
-+};
-+
-+enum pcf50633_reg_int3 {
-+	PCF50633_INT3_BATFULL	= 0x01, /* Battery full */
-+	PCF50633_INT3_CHGHALT	= 0x02,	/* Charger halt */
-+	PCF50633_INT3_THLIMON	= 0x04,
-+	PCF50633_INT3_THLIMOFF	= 0x08,
-+	PCF50633_INT3_USBLIMON	= 0x10,
-+	PCF50633_INT3_USBLIMOFF	= 0x20,
-+	PCF50633_INT3_ADCRDY	= 0x40,	/* ADC conversion finished */
-+	PCF50633_INT3_ONKEY1S	= 0x80,	/* ONKEY pressed 1 second */
-+};
-+
-+enum pcf50633_reg_int4 {
-+	PCF50633_INT4_LOWSYS		= 0x01,
-+	PCF50633_INT4_LOWBAT		= 0x02,
-+	PCF50633_INT4_HIGHTMP		= 0x04,
-+	PCF50633_INT4_AUTOPWRFAIL	= 0x08,
-+	PCF50633_INT4_DWN1PWRFAIL	= 0x10,
-+	PCF50633_INT4_DWN2PWRFAIL	= 0x20,
-+	PCF50633_INT4_LEDPWRFAIL	= 0x40,
-+	PCF50633_INT4_LEDOVP		= 0x80,
-+};
-+
-+enum pcf50633_reg_int5 {
-+	PCF50633_INT4_LDO1PWRFAIL	= 0x01,
-+	PCF50633_INT4_LDO2PWRFAIL	= 0x02,
-+	PCF50633_INT4_LDO3PWRFAIL	= 0x04,
-+	PCF50633_INT4_LDO4PWRFAIL	= 0x08,
-+	PCF50633_INT4_LDO5PWRFAIL	= 0x10,
-+	PCF50633_INT4_LDO6PWRFAIL	= 0x20,
-+	PCF50633_INT4_HCLDOPWRFAIL	= 0x40,
-+	PCF50633_INT4_HCLDOOVL		= 0x80,
-+};
-+
-+enum pcf50633_reg_oocwake {
-+	PCF50633_OOCWAKE_ONKEY		= 0x01,
-+	PCF50633_OOCWAKE_EXTON1		= 0x02,
-+	PCF50633_OOCWAKE_EXTON2		= 0x04,
-+	PCF50633_OOCWAKE_EXTON3		= 0x08,
-+	PCF50633_OOCWAKE_RTC		= 0x10,
-+	/* reserved */
-+	PCF50633_OOCWAKE_USB		= 0x40,
-+	PCF50633_OOCWAKE_ADP		= 0x80,
-+};
-+
-+enum pcf50633_reg_mbcc1 {
-+	PCF50633_MBCC1_CHGENA		= 0x01,	/* Charger enable */
-+	PCF50633_MBCC1_AUTOSTOP		= 0x02,
-+	PCF50633_MBCC1_AUTORES		= 0x04, /* automatic resume */
-+	PCF50633_MBCC1_RESUME		= 0x08, /* explicit resume cmd */
-+	PCF50633_MBCC1_RESTART		= 0x10, /* restart charging */
-+	PCF50633_MBCC1_PREWDTIME_60M	= 0x20,	/* max. precharging time */
-+	PCF50633_MBCC1_WDTIME_1H	= 0x00,
-+	PCF50633_MBCC1_WDTIME_2H	= 0x40,
-+	PCF50633_MBCC1_WDTIME_4H	= 0x80,
-+	PCF50633_MBCC1_WDTIME_6H	= 0xc0,
-+};
-+#define PCF50633_MBCC1_WDTIME_MASK	  0xc0
-+
-+enum pcf50633_reg_mbcc2 {
-+	PCF50633_MBCC2_VBATCOND_2V7	= 0x00,
-+	PCF50633_MBCC2_VBATCOND_2V85	= 0x01,
-+	PCF50633_MBCC2_VBATCOND_3V	= 0x02,
-+	PCF50633_MBCC2_VBATCOND_3V15	= 0x03,
-+	PCF50633_MBCC2_VMAX_4V		= 0x00,
-+	PCF50633_MBCC2_VMAX_4V20	= 0x28,
-+	PCF50633_MBCC2_VRESDEBTIME_64S	= 0x80,	/* debounce time (32/64sec) */
-+};
-+#define	PCF50633_MBCC2_VBATCOND_MASK	  0x03
-+#define PCF50633_MBCC2_VMAX_MASK	  0x3c
-+
-+#define PCF50633_OOCSTAT_ONKEY		0x01
-+
-+/* this is to be provided by the board implementation */
-+extern const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS];
-+
-+void pcf50633_reg_write(u_int8_t reg, u_int8_t val);
-+
-+u_int8_t pcf50633_reg_read(u_int8_t reg);
-+
-+void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val);
-+void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits);
-+
-+void pcf50633_init(void);
-+void pcf50633_usb_maxcurrent(unsigned int ma);
-+
-+#endif /* _PCF50633_H */
-+
-Index: u-boot/drivers/pcf50633.c
-===================================================================
---- /dev/null
-+++ u-boot/drivers/pcf50633.c
-@@ -0,0 +1,142 @@
-+#include <common.h>
-+
-+#ifdef CONFIG_DRIVER_PCF50633
-+
-+#include <i2c.h>
-+#include <pcf50633.h>
-+#include <asm/atomic.h>
-+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-+
-+#define PCF50633_I2C_ADDR		0x73
-+
-+void __pcf50633_reg_write(u_int8_t reg, u_int8_t val)
-+{
-+	i2c_write(PCF50633_I2C_ADDR, reg, 1, &val, 1);
-+}
-+
-+u_int8_t __pcf50633_reg_read(u_int8_t reg)
-+{
-+	u_int8_t tmp;
-+	i2c_read(PCF50633_I2C_ADDR, reg, 1, &tmp, 1);
-+	return tmp;
-+}
-+
-+void pcf50633_reg_write(u_int8_t reg, u_int8_t val)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	__pcf50633_reg_write(reg, val);
-+	local_irq_restore(flags);
-+}
-+
-+u_int8_t pcf50633_reg_read(u_int8_t reg)
-+{
-+	unsigned long flags;
-+	u_int8_t tmp;
-+
-+	local_irq_save(flags);
-+	tmp = __pcf50633_reg_read(reg);
-+	local_irq_restore(flags);
-+
-+	return tmp;
-+}
-+
-+void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val)
-+{
-+	unsigned long flags;
-+	u_int8_t tmp;
-+
-+	local_irq_save(flags);
-+	tmp = __pcf50633_reg_read(reg);
-+	__pcf50633_reg_write(reg, (val & mask) | (tmp & ~mask));
-+	local_irq_restore(flags);
-+}
-+
-+void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits)
-+{
-+	unsigned long flags;
-+	u_int8_t tmp;
-+
-+	local_irq_save(flags);
-+	tmp = pcf50633_reg_read(reg);
-+	pcf50633_reg_write(reg, (tmp & ~bits));
-+	local_irq_restore(flags);
-+}
-+
-+static const u_int8_t regs_invalid[] = {
-+	PCF50633_REG_VERSION,
-+	PCF50633_REG_VARIANT,
-+	PCF50633_REG_OOCSHDWN,
-+	PCF50633_REG_INT1,
-+	PCF50633_REG_INT2,
-+	PCF50633_REG_INT3,
-+	PCF50633_REG_INT4,
-+	PCF50633_REG_INT5,
-+	PCF50633_REG_OOCSTAT,
-+	0x2c,
-+	PCF50633_REG_DCDCSTAT,
-+	PCF50633_REG_LDOSTAT,
-+	PCF50633_REG_MBCS1,
-+	PCF50633_REG_MBCS2,
-+	PCF50633_REG_MBCS3,
-+	PCF50633_REG_ALMDATA,
-+	0x51,
-+	/* 0x55 ... 0x6e: don't write */
-+	/* 0x6f ... 0x83: reserved */
-+};
-+#define PCF50633_LAST_REG	0x55
-+
-+static int reg_is_invalid(u_int8_t reg)
-+{
-+	int i;
-+
-+	/* all registers above 0x55 (ADCS1) except 0x84 */
-+	if (reg == PCF50633_REG_DCDCPFM)
-+		return 0;
-+	if (reg >= 0x55)
-+		return 1;
-+
-+	for (i = 0; i < ARRAY_SIZE(regs_invalid); i++) {
-+		if (regs_invalid[i] > reg)
-+			return 0;
-+		if (regs_invalid[i] == reg)
-+			return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+
-+/* initialize PCF50633 register set */
-+void pcf50633_init(void)
-+{
-+	unsigned long flags;
-+	u_int8_t i;
-+
-+	local_irq_save(flags);
-+	for (i = 0; i < PCF50633_LAST_REG; i++) {
-+		if (reg_is_invalid(i))
-+			continue;
-+		__pcf50633_reg_write(i, pcf50633_initial_regs[i]);
-+	}
-+	local_irq_restore(flags);
-+}
-+
-+void pcf50633_usb_maxcurrent(unsigned int ma)
-+{
-+	u_int8_t val;
-+
-+	if (ma < 100)
-+		val = 0x03;
-+	else if (ma < 500)
-+		val = 0x00;
-+	else if (ma < 1000)
-+		val = 0x01;
-+	else
-+		val = 0x02;
-+
-+	return pcf50633_reg_set_bit_mask(PCF50633_REG_MBCC7, 0x03, val);
-+}
-+
-+#endif /* CONFIG DRIVER_PCF50633 */
-Index: u-boot/board/neo1973/common/lowlevel_init.S
-===================================================================
---- u-boot.orig/board/neo1973/common/lowlevel_init.S
-+++ u-boot/board/neo1973/common/lowlevel_init.S
-@@ -49,7 +49,7 @@
- #define WAIT		 	(0x1<<2)
- #define UBLB		 	(0x1<<3)
- 
--#define B1_BWSCON	  	(DW32)
-+#define B1_BWSCON	  	(DW16 + WAIT + UBLB)
- #define B2_BWSCON	  	(DW16)
- #define B3_BWSCON	  	(DW16 + WAIT + UBLB)
- #define B4_BWSCON	  	(DW16)
-@@ -68,9 +68,9 @@
- 
- /* BANK1CON */
- #define B1_Tacs		 	0x0	/*  0clk */
--#define B1_Tcos		 	0x0	/*  0clk */
--#define B1_Tacc		 	0x7	/* 14clk */
--#define B1_Tcoh		 	0x0	/*  0clk */
-+#define B1_Tcos		 	0x1	/*  1clk */
-+#define B1_Tacc		 	0x4	/*  4clk */
-+#define B1_Tcoh		 	0x1	/*  1clk */
- #define B1_Tah		 	0x0	/*  0clk */
- #define B1_Tacp		 	0x0
- #define B1_PMC		 	0x0
-@@ -112,7 +112,7 @@
- #if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
- #define B6_SCAN		 	0x1	/* 9bit */
- #elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
--      defined(CONFIG_ARCH_GTA01B_v4)
-+      defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1)
- #define B6_SCAN		 	0x2	/* 10bit */
- #endif
- 
-@@ -165,6 +165,18 @@
- 	str	r1, [r0]
- #endif
- 
-+#if defined(CONFIG_ARCH_GTA02_v1)
-+	/* enable KEEPACT to make sure PMU keeps us alive */
-+	ldr	r0, =0x56000000	/* GPJ base */
-+	ldr	r1, [r0, #0xd0]	/* GPJCON */
-+	orr	r1, r1, #(1 << 6)
-+	str	r1, [r0, #0xd0]
-+
-+	ldr	r1, [r0, #0xd4]	/* GPJDAT */
-+	orr	r1, r1, #(1 << 3)
-+	str	r1, [r0, #0xd4]
-+#endif
-+
- 	/* everything is fine now */
- 	mov	pc, lr
- 
-Index: u-boot/board/neo1973/gta02/pcf50633.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta02/pcf50633.c
-@@ -0,0 +1,91 @@
-+
-+#include <common.h>
-+#include <pcf50633.h>
-+
-+/* initial register set for PCF50633 in Neo1973 GTA02 devices */
-+const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS] = {
-+	/* gap */
-+	[PCF50633_REG_INT1M]	= PCF50633_INT1_SECOND,
-+	[PCF50633_REG_INT2M]	= PCF50633_INT2_EXTON3F |
-+				  PCF50633_INT2_EXTON3R |
-+				  PCF50633_INT2_EXTON2F |
-+				  PCF50633_INT2_EXTON2R |
-+				  PCF50633_INT2_EXTON1R |
-+				  PCF50633_INT2_EXTON1F,
-+	[PCF50633_REG_INT3M]	= PCF50633_INT3_ADCRDY,
-+	[PCF50633_REG_INT4M]	= 0x00,
-+	[PCF50633_REG_INT5M]	= 0x00,
-+
-+	[PCF50633_REG_OOCWAKE]	= 0xd3, /* wake from ONKEY,EXTON!,RTC,USB,ADP */
-+	[PCF50633_REG_OOCTIM1]	= 0xaa,	/* debounce 14ms everything */
-+	[PCF50633_REG_OOCTIM2]	= 0x4a,
-+	[PCF50633_REG_OOCMODE]	= 0x55,
-+	[PCF50633_REG_OOCCTL]	= 0x44,
-+
-+	[PCF50633_REG_GPIOCTL]	= 0x01,	/* only GPIO1 is input */
-+	[PCF50633_REG_GPIO2CFG]	= 0x00,
-+	[PCF50633_REG_GPIO3CFG]	= 0x00,
-+	[PCF50633_REG_GPOCFG]	= 0x00,
-+
-+	[PCF50633_REG_SVMCTL]	= 0x08,	/* 3.10V SYS voltage thresh. */
-+	[PCF50633_REG_BVMCTL]	= 0x02,	/* 2.80V BAT voltage thresh. */
-+
-+	[PCF50633_REG_STBYCTL1]	= 0x00,
-+	[PCF50633_REG_STBYCTL2]	= 0x00,
-+
-+	[PCF50633_REG_DEBPF1]	= 0xff,
-+	[PCF50633_REG_DEBPF2]	= 0xff,
-+	[PCF50633_REG_DEBPF2]	= 0x3f,
-+
-+	[PCF50633_REG_AUTOOUT]	= 0x6b,	/* 3.300V */
-+	[PCF50633_REG_AUTOENA]	= 0x01,	/* always on */
-+	[PCF50633_REG_AUTOCTL]	= 0x00, /* automatic up/down operation */
-+	[PCF50633_REG_AUTOMXC]	= 0x0a,	/* 400mA at startup FIXME */
-+
-+	[PCF50633_REG_DOWN1OUT]	= 0x1b, /* 1.3V (0x1b * .025V + 0.625V) */
-+	[PCF50633_REG_DOWN1ENA] = 0x02, /* enabled if GPIO1 = HIGH */
-+	[PCF50633_REG_DOWN1CTL]	= 0x00, /* no DVM */
-+	[PCF50633_REG_DOWN1MXC]	= 0x22,	/* limit to 510mA at startup */
-+
-+	[PCF50633_REG_DOWN2OUT]	= 0x2f, /* 1.8V (0x2f * .025V + 0.625V) */
-+	[PCF50633_REG_DOWN2ENA]	= 0x02, /* enabled if GPIO1 = HIGH */
-+	[PCF50633_REG_DOWN2CTL]	= 0x00,	/* no DVM */
-+	[PCF50633_REG_DOWN2MXC]	= 0x22, /* limit to 510mA at startup */
-+
-+	[PCF50633_REG_MEMLDOOUT] = 0x00,
-+	[PCF50633_REG_MEMLDOENA] = 0x00,
-+
-+	[PCF50633_REG_LEDOUT]	= 0x2f,	/* full backlight power */
-+	[PCF50633_REG_LEDENA]	= 0x02,	/* enabled if GPIO1 = HIGH */
-+	[PCF50633_REG_LEDCTL]	= 0x05, /* ovp enabled, ocp 500mA */
-+	[PCF50633_REG_LEDDIM]	= 0x20,	/* dimming curve */
-+
-+	[PCF50633_REG_LDO1OUT]	= 0x04,	/* 1.3V (4 * 0.1V + 0.9V) */
-+	[PCF50633_REG_LDO1ENA]	= 0x01,	/* always on */
-+
-+	[PCF50633_REG_LDO2OUT]	= 0x18,	/* 3.3V (24 * 0.1V + 0.9V) */
-+	[PCF50633_REG_LDO2ENA]	= 0x02, /* enabled if GPIO1 = HIGH */
-+
-+	[PCF50633_REG_LDO3OUT]	= 0x15,	/* 3.0V (21 * 0.1V + 0.9V) */
-+	[PCF50633_REG_LDO3ENA]	= 0x02, /* enabled if GPIO1 = HIGH */
-+
-+	[PCF50633_REG_LDO4ENA]	= 0x00,
-+	[PCF50633_REG_LDO5ENA]	= 0x00,
-+	[PCF50633_REG_LDO6ENA]	= 0x00,
-+
-+	[PCF50633_REG_HCLDOOUT]	= 0x18,	/* 3.3V (24 * 0.1V + 0.9V) */
-+	[PCF50633_REG_HCLDOENA]	= 0x00, /* off by default*/
-+
-+	[PCF50633_REG_DCDCPFM]	= 0x00, /* off by default*/
-+
-+	[PCF50633_REG_MBCC1]	= 0xe6,
-+	[PCF50633_REG_MBCC2]	= 0x28,	/* Vbatconid=2.7V, Vmax=4.20V */
-+	[PCF50633_REG_MBCC3]	= 0x19,	/* 25/255 == 98mA pre-charge */
-+	[PCF50633_REG_MBCC4]	= 0xff, /* 255/255 == 1A adapter fast */
-+	[PCF50633_REG_MBCC5]	= 0x7f,	/* 127/255 == 500mA usb fast */
-+	[PCF50633_REG_MBCC6]	= 0x00, /* cutoff current 1/32 * Ichg */
-+	[PCF50633_REG_MBCC7]	= 0x00,	/* 1.6A max bat curr, USB 100mA */
-+	[PCF50633_REG_MBCC8]	= 0x00,
-+
-+	[PCF50633_REG_BBCCTL]	= 0x19,	/* 3V, 200uA, on */
-+};
-Index: u-boot/board/neo1973/gta02/config.mk
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta02/config.mk
-@@ -0,0 +1,32 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+#
-+# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+# GTA01v3 has 1 bank of 64 MB SDRAM
-+# GTA01v4 has 1 bank of 64 MB SDRAM
-+#
-+# 	3000'0000 to 3400'0000
-+# we load ourself to 33F8'0000
-+#
-+# GTA01Bv2 or later has 1 bank of 128 MB SDRAM
-+#
-+# 	3000'0000 to 3800'0000
-+# we load ourself to 37F8'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# download area is 3200'0000 or 3300'0000
-+
-+CONFIG_USB_DFU_VENDOR=0x1457
-+CONFIG_USB_DFU_PRODUCT=0x5119
-+
-+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-+
-+TEXT_BASE = 0x33F80000
-Index: u-boot/drivers/smedia3362.c
-===================================================================
---- /dev/null
-+++ u-boot/drivers/smedia3362.c
-@@ -0,0 +1,125 @@
-+/*
-+ * (C) Copyright 2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if defined(CONFIG_VIDEO_GLAMO3362)
-+
-+#include <video_fb.h>
-+#include "videomodes.h"
-+#include <s3c2410.h>
-+#include "smedia3362.h"
-+
-+/*
-+ * Export Graphic Device
-+ */
-+GraphicDevice smi;
-+
-+
-+struct glamo_script {
-+	u_int16_t reg;
-+	u_int16_t val;
-+} __attribute__((packed));
-+
-+/* from 'initial glamo 3365 script' */
-+static struct glamo_script gl3362_init_script[] = {
-+	/* clock */
-+	{ GLAMO_REG_CLOCK_MEMORY, 	0x300a },
-+	{ GLAMO_REG_CLOCK_LCD,		0x10aa },
-+	{ GLAMO_REG_CLOCK_MMC,		0x100a },
-+	{ GLAMO_REG_CLOCK_ISP,		0x32aa },
-+	{ GLAMO_REG_CLOCK_JPEG,		0x100a },
-+	{ GLAMO_REG_CLOCK_3D,		0x302a },
-+	{ GLAMO_REG_CLOCK_2D,		0x302a },
-+	//{ GLAMO_REG_CLOCK_RISC1,	0x1aaa },
-+	//{ GLAMO_REG_CLOCK_RISC2,	0x002a },
-+	{ GLAMO_REG_CLOCK_MPEG,		0x3aaa },
-+	{ GLAMO_REG_CLOCK_MPROC,	0x12aa },
-+		{ 0xfffe, 5 },
-+	{ GLAMO_REG_CLOCK_HOST,		0x000d },
-+	{ GLAMO_REG_CLOCK_MEMORY,	0x000a }I,
-+	{ GLAMO_REG_CLOCK_LCD,		0x00ee },
-+	{ GLAMO_REG_CLOCK_MMC,		0x000a },
-+	{ GLAMO_REG_CLOCK_ISP,		0x02aa },
-+	{ GLAMO_REG_CLOCK_JPEG,		0x000a },
-+	{ GLAMO_REG_CLOCK_3D,		0x002a },
-+	{ GLAMO_REG_CLOCK_2D,		0x002a },
-+	//{ GLAMO_REG_CLOCK_RISC1,	0x0aaa },
-+	//{ GLAMO_REG_CLOCK_RISC2,	0x002a },
-+	{ GLAMO_REG_CLOCK_MPEG,		0x0aaa },
-+	{ GLAMO_REG_CLOCK_MPROC,	0x02aa },
-+		{ 0xfffe, 5 },
-+	{ GLAMO_REG_PLL_GEN1,		0x061a }, /* PLL1=50MHz, OSCI=32kHz */
-+	{ GLAMO_REG_PLL_GEN3,		0x09c3 }, /* PLL2=80MHz, OSCI=32kHz */
-+		{ 0xfffe, 5 },
-+	{ GLAMO_REG_CLOCK_GEN5_1,	0x18ff },
-+	{ GLAMO_REG_CLOCK_GEN5_2,	0x051f },
-+	{ GLAMO_REG_CLOCK_GEN6,		0x2000 },
-+	{ GLAMO_REG_CLOCK_GEN7,		0x0105 },
-+	{ GLAMO_REG_CLOCK_GEN8,		0x0100 },
-+	{ GLAMO_REG_CLOCK_GEN10,	0x0017 },
-+	{ GLAMO_REG_CLOCK_GEN11,	0x0017 },
-+
-+	/* hostbus interface */
-+	{ GLAMO_REG_HOSTBUS(1),		0x0e00 },
-+	{ GLAMO_REG_HOSTBUS(2),		0x07ff },
-+	{ GLAMO_REG_HOSTBUS(4),		0x0080 },
-+	{ GLAMO_REG_HOSTBUS(5),		0x0244 },
-+	{ GLAMO_REG_HOSTBUS(6),		0x0600 },
-+	{ GLAMO_REG_HOSTBUS(12),	0xf00e },
-+
-+	/* memory */
-+	{ GLAMO_REG_MEM_TYPE,		0x0874 }, /* VRAM 8Mbyte */
-+	{ GLAMO_REG_MEM_GEN,		0xafaf },
-+	{ GLAMO_REG_MEM_TIMING(1),	0x0108 },
-+	{ GLAMO_REG_MEM_TIMING(2),	0x0010 },
-+	{ GLAMO_REG_MEM_TIMING(3),	0x0000 },
-+	{ GLAMO_REG_MEM_TIMING(4),	0x0000 },
-+	{ GLAMO_REG_MEM_TIMING(5),	0x0000 },
-+	{ GLAMO_REG_MEM_TIMING(6),	0x0000 },
-+	{ GLAMO_REG_MEM_TIMING(7),	0x0000 },
-+	{ GLAMO_REG_MEM_TIMING(8),	0x1002 },
-+	{ GLAMO_REG_MEM_TIMING(9),	0x6006 },
-+	{ GLAMO_REG_MEM_TIMING(10),	0x00ff },
-+	{ GLAMO_REG_MEM_TIMING(11),	0x0001 },
-+	{ GLAMO_REG_MEM_POWER1,		0x0020 },
-+	{ GLAMO_REG_MEM_POWRE2,		0x0000 },
-+	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
-+		{ 0xfffe, 1 },
-+	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
-+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
-+};
-+
-+static int glamo3362_init(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(gl3362_init_script); i++) {
-+		struct glamo_reg *reg = gl3362_init_script[i];
-+
-+		if (reg->reg == 0xfffe)
-+			delay(reg->val);
-+		else
-+			gl3362_reg_write(reg->reg, reg->val);
-+	}
-+	/* FIXME */
-+}
-+
-+#endif /* CONFIG_VIDEO_GLAMO3362 */
-Index: u-boot/drivers/Makefile
-===================================================================
---- u-boot.orig/drivers/Makefile
-+++ u-boot/drivers/Makefile
-@@ -50,7 +50,7 @@
- 	  usbdcore.o usbdfu.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \
- 	  videomodes.o w83c553f.o \
- 	  ks8695eth.o \
--	  pcf50606.o \
-+	  pcf50606.o pcf50633.o \
- 	  pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o	\
- 	  rpx_pcmcia.o \
- 	  fsl_i2c.o s3c2410_fb.o
-Index: u-boot/common/cmd_nand.c
-===================================================================
---- u-boot.orig/common/cmd_nand.c
-+++ u-boot/common/cmd_nand.c
-@@ -208,8 +208,10 @@
- 		putc('\n');
- 		for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
- 			if (nand_info[i].name)
--				printf("Device %d: %s, sector size %lu KiB\n",
-+				printf("Device %d: %s, page size %lu, "
-+					"sector size %lu KiB\n",
- 					i, nand_info[i].name,
-+					nand_info[i].oobblock,
- 					nand_info[i].erasesize >> 10);
- 		}
- 		return 0;
-Index: u-boot/drivers/nand/nand_ids.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_ids.c
-+++ u-boot/drivers/nand/nand_ids.c
-@@ -67,7 +67,7 @@
- 
- 	{"NAND 256MiB 3,3V 8-bit", 	0x71, 512, 256, 0x4000, 0},
- 
--	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
-+	//{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
- 
- 	/* These are the new chips with large page size. The pagesize
- 	* and the erasesize is determined from the extended id bytes
-Index: u-boot/board/neo1973/common/udc.c
-===================================================================
---- u-boot.orig/board/neo1973/common/udc.c
-+++ u-boot/board/neo1973/common/udc.c
-@@ -3,6 +3,7 @@
- #include <usbdcore.h>
- #include <s3c2410.h>
- #include <pcf50606.h>
-+#include <pcf50633.h>
- 
- void udc_ctrl(enum usbd_event event, int param)
- {
-@@ -23,6 +24,11 @@
-     defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-     defined(CONFIG_ARCH_GTA01B_v4)
- 		pcf50606_charge_autofast(param);
-+#elif defined(CONFIG_ARCH_GTA02_v1)
-+		if (param)
-+			pcf50633_usb_maxcurrent(500);
-+		else
-+			pcf50633_usb_maxcurrent(0);
- #endif
- 		break;
- 	default:
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-hxd8.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-hxd8.patch
deleted file mode 100644
index 676cddbc1e..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-hxd8.patch
+++ /dev/null
@@ -1,1169 +0,0 @@
-Patch to add HXD8 support
-
-Index: u-boot/Makefile
-===================================================================
---- u-boot.orig/Makefile
-+++ u-boot/Makefile
-@@ -2026,6 +2026,9 @@
- qt2410_config	:	unconfig
- 	@./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
- 
-+hxd8_config	:	unconfig
-+	@$(MKCONFIG) $(@:_config=) arm arm920t hxd8 NULL s3c24x0
-+
- scb9328_config	:	unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
- 
-Index: u-boot/board/hxd8/Makefile
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/Makefile
-@@ -0,0 +1,65 @@
-+#
-+# (C) Copyright 2000-2006
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= $(obj)lib$(BOARD).a
-+
-+COBJS	:= hxd8.o udc.o pcf50606.o
-+SOBJS	:= lowlevel_init.o
-+
-+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS	:= $(addprefix $(obj),$(COBJS))
-+SOBJS	:= $(addprefix $(obj),$(SOBJS))
-+
-+all:	$(LIB) lowevel_foo.bin
-+
-+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-+
-+lowlevel_foo.o:	lowlevel_foo.S
-+	$(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \
-+	  -o lowlevel_foo.o lowlevel_foo.S
-+
-+lowlevel_foo:	lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds
-+	$(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \
-+	  lowlevel_init.o lowlevel_foo.o -o lowlevel_foo
-+
-+lowevel_foo.bin:	lowlevel_foo
-+	$(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \
-+	  lowlevel_foo lowlevel_foo.bin
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-Index: u-boot/board/hxd8/hxd8.c
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/hxd8.c
-@@ -0,0 +1,189 @@
-+/*
-+ * (C) Copyright 2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <video_fb.h>
-+#include <nand.h>
-+#include <pcf50606.h>
-+#include <s3c2440.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#define FCLK_SPEED 1
-+
-+#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
-+#define M_MDIV	0xC3
-+#define M_PDIV	0x4
-+#define M_SDIV	0x1
-+#elif FCLK_SPEED==1
-+#if 0
-+#define M_MDIV	0x6e	/* Fout = 399.65MHz */
-+#define M_PDIV	0x3
-+#define M_SDIV	0x1
-+#else
-+#define M_MDIV	0x61	/* Fout = 296.35MHz due to wrong PLL capacitors */
-+#define M_PDIV	0x1
-+#define M_SDIV	0x2
-+#endif
-+#endif
-+
-+#define USB_CLOCK 1
-+
-+#if USB_CLOCK==0
-+#define U_M_MDIV	0xA1
-+#define U_M_PDIV	0x3
-+#define U_M_SDIV	0x1
-+#elif USB_CLOCK==1
-+#define U_M_MDIV	0x3c
-+#define U_M_PDIV	0x4
-+#define U_M_SDIV	0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+	__asm__ volatile ("1:\n"
-+	  "subs %0, %1, #1\n"
-+	  "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	/* to reduce PLL lock time, adjust the LOCKTIME register */
-+	clk_power->LOCKTIME = 0xFFFFFF;
-+
-+	/* configure MPLL */
-+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (4000);
-+
-+	/* configure UPLL */
-+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (8000);
-+
-+	/* set up the I/O ports */
-+	gpio->GPACON = 0x005E0FFE;
-+	gpio->GPADAT = 0x0001C000;
-+	gpio->GPBCON = 0x00045542;
-+	gpio->GPBUP = 0x000007FF;
-+	gpio->GPCCON = 0xAAAA02A9;
-+	gpio->GPCUP = 0x0000FFFF;
-+	gpio->GPDCON = 0xAAAAAAAA;
-+	gpio->GPDUP = 0x0000FFFF;
-+	gpio->GPECON = 0xAAAAAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+	gpio->GPFCON = 0x0000AAA9;
-+	gpio->GPFUP = 0x000000FF;
-+	gpio->GPGCON = 0x027D0316;
-+	gpio->GPGUP = 0x0000FFFF;
-+	gpio->GPHCON = 0x0014AAAA;
-+	gpio->GPHUP = 0x000007FF;
-+	gpio->GPJCON = 0x00000000;
-+
-+	/* USB CHG enable */
-+	gpio->GPGDAT |= ( 1 << 11);
-+#if 0
-+	/* USB Device Part */
-+	/*GPGCON is reset for USB Device */
-+	gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */
-+	gpio->GPGUP = gpio->GPGUP | ( 1 << 12);			/* Pull up disable */
-+
-+	gpio->GPGDAT |= ( 1 << 12);
-+	gpio->GPGDAT &= ~( 1 << 12);
-+	udelay(20000);
-+	gpio->GPGDAT |= ( 1 << 12);
-+#endif
-+
-+	/* arch number of SMDK2440-Board */
-+	gd->bd->bi_arch_number = MACH_TYPE_HXD8;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0x30000100;
-+
-+	icache_enable();
-+	dcache_enable();
-+
-+	return 0;
-+}
-+
-+void board_video_init(GraphicDevice *pGD)
-+{
-+	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-+
-+	lcd->LCDCON1 = 0x0000057b;
-+	lcd->LCDCON2 = 0x0143c049;
-+	lcd->LCDCON3 = 0x0009df01;
-+	lcd->LCDCON4 = 0x00000028;
-+	lcd->LCDCON5 = 0x00000b08;
-+
-+	lcd->TPAL = 0x01202020;
-+
-+	//lcd->LCDCON5 |= (0x01 << 3);
-+}
-+
-+int board_late_init(void)
-+{
-+	/* Initialize the Power Management Unit with a safe register set */
-+	pcf50606_init();
-+
-+	return 0;
-+}
-+
-+int dram_init(void)
-+{
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+	return 0;
-+}
-+
-+u_int32_t get_board_rev(void)
-+{
-+	return 0x00000110;
-+}
-+
-+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000.
-+   "initrd" is sized such that it can hold two uncompressed 16 bit 640*480
-+   images: 640*480*2*2 = 1228800 < 1245184. */
-+
-+unsigned int dynpart_size[] = {
-+    CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3fd00000, 0 };
-+char *dynpart_names[] = {
-+    "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL };
-+
-Index: u-boot/board/hxd8/lowlevel_init.S
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/lowlevel_init.S
-@@ -0,0 +1,171 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
-+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
-+ *
-+ * Modified for the FIC HXD8 by Harald Welte <laforge@openmoko.org>
-+ * (C) Copyright 2007 by Openmoko, Inc.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE  <hitchcar@sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON	0x48000000
-+
-+/* BWSCON */
-+#define DW8		 	(0x0)
-+#define DW16		 	(0x1)
-+#define DW32		 	(0x2)
-+#define WAIT		 	(0x1<<2)
-+#define UBLB		 	(0x1<<3)
-+
-+#define B1_BWSCON	  	(DW32)
-+#define B2_BWSCON	  	(DW16)
-+#define B3_BWSCON	  	(DW16 + WAIT + UBLB)
-+#define B4_BWSCON	  	(DW16)
-+#define B5_BWSCON	  	(DW16)
-+#define B6_BWSCON	  	(DW32)
-+#define B7_BWSCON	  	(DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs		 	0x0	/*  0clk */
-+#define B0_Tcos		 	0x0	/*  0clk */
-+#define B0_Tacc		 	0x7	/* 14clk */
-+#define B0_Tcoh		 	0x0	/*  0clk */
-+#define B0_Tah		 	0x0	/*  0clk */
-+#define B0_Tacp		 	0x0
-+#define B0_PMC		 	0x0	/* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs		 	0x0	/*  0clk */
-+#define B1_Tcos		 	0x0	/*  0clk */
-+#define B1_Tacc		 	0x7	/* 14clk */
-+#define B1_Tcoh		 	0x0	/*  0clk */
-+#define B1_Tah		 	0x0	/*  0clk */
-+#define B1_Tacp		 	0x0
-+#define B1_PMC		 	0x0
-+
-+#define B2_Tacs		 	0x0
-+#define B2_Tcos		 	0x0
-+#define B2_Tacc		 	0x7
-+#define B2_Tcoh		 	0x0
-+#define B2_Tah		 	0x0
-+#define B2_Tacp		 	0x0
-+#define B2_PMC		 	0x0
-+
-+#define B3_Tacs		 	0x0	/*  0clk */
-+#define B3_Tcos		 	0x3	/*  4clk */
-+#define B3_Tacc		 	0x7	/* 14clk */
-+#define B3_Tcoh		 	0x1	/*  1clk */
-+#define B3_Tah		 	0x0	/*  0clk */
-+#define B3_Tacp		 	0x3     /*  6clk */
-+#define B3_PMC		 	0x0	/* normal */
-+
-+#define B4_Tacs		 	0x0	/*  0clk */
-+#define B4_Tcos		 	0x0	/*  0clk */
-+#define B4_Tacc		 	0x7	/* 14clk */
-+#define B4_Tcoh		 	0x0	/*  0clk */
-+#define B4_Tah		 	0x0	/*  0clk */
-+#define B4_Tacp		 	0x0
-+#define B4_PMC		 	0x0	/* normal */
-+
-+#define B5_Tacs		 	0x0	/*  0clk */
-+#define B5_Tcos		 	0x0	/*  0clk */
-+#define B5_Tacc		 	0x7	/* 14clk */
-+#define B5_Tcoh		 	0x0	/*  0clk */
-+#define B5_Tah		 	0x0	/*  0clk */
-+#define B5_Tacp		 	0x0
-+#define B5_PMC		 	0x0	/* normal */
-+
-+#define B6_MT		 	0x3	/* SDRAM */
-+#define B6_Trcd	 	 	0x1	/* 3clk */
-+#define B6_SCAN		 	0x2	/* 10bit */
-+
-+#define B7_MT		 	0x3	/* SDRAM */
-+#define B7_Trcd		 	0x1	/* 3clk */
-+#define B7_SCAN		 	0x1	/* 9bit */
-+
-+/* REFRESH parameter */
-+#define REFEN		 	0x1	/* Refresh enable */
-+#define TREFMD		 	0x0	/* CBR(CAS before RAS)/Auto refresh */
-+#define Trp		 	0x1	/* 3clk */
-+#define Trc		 	0x3	/* 7clk */
-+#define Tchr		 	0x2	/* 3clk */
-+#define REFCNT		 	1113	/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+	.word	TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+	/* memory control configuration */
-+	/* make r0 relative the current location so that it */
-+	/* reads SMRDATA out of FLASH rather than memory ! */
-+	ldr     r0, =SMRDATA
-+	ldr	r1, _TEXT_BASE
-+	sub	r0, r0, r1
-+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
-+	add     r2, r0, #13*4
-+0:
-+	ldr     r3, [r0], #4
-+	str     r3, [r1], #4
-+	cmp     r2, r0
-+	bne     0b
-+
-+	/* setup asynchronous bus mode */
-+	mrc	p15, 0, r1 ,c1 ,c0, 0
-+	orr	r1, r1, #0xc0000000
-+	mcr	p15, 0, r1, c1, c0, 0
-+
-+	/* everything is fine now */
-+	mov	pc, lr
-+
-+	.ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+    .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+    .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+    .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+    .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+    .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+    .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+    .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+    .word 0x32
-+    .word 0x30
-+    .word 0x30
-Index: u-boot/include/configs/hxd8.h
-===================================================================
---- /dev/null
-+++ u-boot/include/configs/hxd8.h
-@@ -0,0 +1,277 @@
-+/*
-+ * (C) Copyright 2007 Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * Configuation settings for the FIC HXD8
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/* we want to be able to start u-boot directly from within NAND flash */
-+#define CONFIG_LL_INIT_NAND_ONLY
-+#define CONFIG_S3C2410_NAND_BOOT	1
-+#define CONFIG_S3C2410_NAND_SKIP_BAD	1
-+
-+#define CFG_UBOOT_SIZE		0x40000 /* size of u-boot, for NAND loading */
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_S3C2440		1	/* in a SAMSUNG S3C2440 SoC     */
-+#define CONFIG_SMDK2440		1	/* on a SAMSUNG SMDK2440 Board  */
-+#define CONFIG_HXD8		1	/* on a FIC HXD8 Board  */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ	16934400/* the HXD8 has this input clock */
-+
-+
-+#define USE_920T_MMU		1
-+#define CONFIG_USE_IRQ		1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 2048*1024)
-+					/* >> CFG_VIDEO_LOGO_MAX_SIZE */
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL3		1	/* we use SERIAL 3 on HXD8 */
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define	CONFIG_RTC_S3C24X0	1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE		115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS (\
-+			CFG_CMD_BDI	 | \
-+			CFG_CMD_LOADS	 | \
-+			CFG_CMD_LAODB	 | \
-+			CFG_CMD_IMI	 | \
-+			CFG_CMD_CACHE	 | \
-+			CFG_CMD_MEMORY	 | \
-+			CFG_CMD_ENV	 | \
-+			/* CFG_CMD_IRQ	 | */  \
-+			CFG_CMD_BOOTD	 | \
-+			CFG_CMD_CONSOLE	 | \
-+			/* CFG_CMD_BMP	 | */ \
-+			CFG_CMD_ASKENV	 | \
-+			CFG_CMD_RUN	 | \
-+			CFG_CMD_ECHO	 | \
-+			CFG_CMD_I2C	 | \
-+			CFG_CMD_REGINFO	 | \
-+			CFG_CMD_IMMAP	 | \
-+			CFG_CMD_DATE	 | \
-+			CFG_CMD_AUTOSCRIPT | \
-+			CFG_CMD_BSP	 | \
-+			CFG_CMD_ELF	 | \
-+			CFG_CMD_MISC	 | \
-+			/* CFG_CMD_USB	 | */ \
-+			CFG_CMD_JFFS2	 | \
-+			CFG_CMD_DIAG	 | \
-+			/* CFG_CMD_HWFLOW	 | */ \
-+			CFG_CMD_SAVES	 | \
-+			CFG_CMD_NAND	 | \
-+			CFG_CMD_PORTIO	 | \
-+			CFG_CMD_MMC	 | \
-+			CFG_CMD_FAT	 | \
-+			CFG_CMD_EXT2	 | \
-+			0)
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY	3
-+#define CONFIG_BOOTARGS    	""
-+#define CONFIG_BOOTCOMMAND	"setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION	1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX	3		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define	CFG_LONGHELP				/* undef to save memory		*/
-+#define	CFG_PROMPT		"HXD8 # "	/* Monitor Command Prompt	*/
-+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define	CFG_MAXARGS		64		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+
-+#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
-+
-+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define	CFG_LOAD_ADDR		0x33000000	/* default load address	*/
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define	CFG_HZ			1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(512*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(8*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+#if 0
-+#define CONFIG_USB_OHCI		1
-+#endif
-+
-+#if 1
-+#define CONFIG_USB_DEVICE	1
-+#define CONFIG_USB_TTY		1
-+#define CFG_CONSOLE_IS_IN_ENV	1
-+#define CONFIG_USBD_VENDORID 		0x1457     /* Linux/NetChip */
-+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x5120    /* gserial */
-+#define CONFIG_USBD_PRODUCTID_CDCACM 	0x511a    /* CDC ACM */
-+#define CONFIG_USBD_MANUFACTURER	"Openmoko, Inc"
-+#define CONFIG_USBD_PRODUCT_NAME	"HXD8 Bootloader " U_BOOT_VERSION
-+#define CONFIG_USBD_DFU			1
-+#define CONFIG_USBD_DFU_XFER_SIZE 	4096	/* 0x4000 */
-+#define CONFIG_USBD_DFU_INTERFACE	2
-+#endif
-+#define CFG_CONSOLE_IS_IN_ENV	1
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS 					\
-+	"usbtty=cdc_acm\0"						\
-+	"bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC2,115200 console=tty0 loglevel=8\0" \
-+	""
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x08000000 /* 128 MB */
-+#define PHYS_SDRAM_RES_SIZE	0x00200000 /* 2 MB for frame buffer */
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+/* No NOR flash in this device */
-+#define CFG_NO_FLASH		1
-+
-+#define CFG_ENV_SIZE		0x20000		/* 128k Total Size of Environment Sector */
-+#define	CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_OFFSET_OOB   	1               /* Location of ENV stored in block 0 OOB */
-+#define	CFG_PREBOOT_OVERRIDE	1	/* allow preboot from memory */
-+
-+#define NAND_MAX_CHIPS		3
-+#define CFG_NAND_BASE		0x4e000000
-+#define CFG_MAX_NAND_DEVICE	NAND_MAX_CHIPS
-+#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE, CFG_NAND_BASE, CFG_NAND_BASE }
-+
-+#define CONFIG_MMC		1
-+#define CFG_MMC_BASE		0xff000000
-+
-+/* EXT2 driver */
-+#define CONFIG_EXT2		1
-+
-+#define CONFIG_FAT		1
-+#define CONFIG_SUPPORT_VFAT
-+
-+#if 1
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_CMDLINE	1
-+#define CONFIG_JFFS2_NAND	1
-+#define CONFIG_JFFS2_NAND_DEV	0
-+//#define CONFIG_JFFS2_NAND_OFF	0x634000
-+//#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
-+#endif
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_CMDLINE_TAG		1
-+#define CONFIG_REVISION_TAG		1
-+#if 0
-+#define CONFIG_SERIAL_TAG		1
-+#endif
-+
-+#define CONFIG_DRIVER_S3C24X0_I2C	1
-+#define CONFIG_HARD_I2C			1
-+#define CFG_I2C_SPEED			400000	/* 400kHz according to PCF50606 data sheet */
-+#define CFG_I2C_SLAVE			0x7f
-+
-+/* we have a board_late_init() function */
-+#define BOARD_LATE_INIT			1
-+
-+#if 1
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_SPLASH_SCREEN
-+#define CFG_VIDEO_LOGO_MAX_SIZE	(640*480+1024+100) /* 100 = slack */
-+#define CONFIG_VIDEO_BMP_GZIP
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+#define CONFIG_UNZIP
-+
-+#define VIDEO_KBD_INIT_FCT	0
-+#define VIDEO_TSTC_FCT		serial_tstc
-+#define VIDEO_GETC_FCT		serial_getc
-+
-+#define LCD_VIDEO_ADDR		0x33d00000
-+#endif
-+
-+#define CONFIG_S3C2410_NAND_BBT                1
-+//#define CONFIG_S3C2410_NAND_HWECC              1
-+
-+#define CONFIG_DRIVER_PCF50606		1
-+
-+#define MTDIDS_DEFAULT	"nand0=hxd8-nand"
-+#define MTPARTS_DEFAULT	"hxd8-nand:256k(u-boot),128k(u-boot_env),2M(kernel),640k(splash),0x3fd00000(jffs2)"
-+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "hxd8-nand"
-+#define CONFIG_NAND_DYNPART
-+
-+#endif	/* __CONFIG_H */
-Index: u-boot/board/hxd8/udc.c
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/udc.c
-@@ -0,0 +1,30 @@
-+
-+#include <common.h>
-+#include <usbdcore.h>
-+#include <s3c2440.h>
-+
-+#if defined(CONFIG_USB_DEVICE)
-+
-+void udc_ctrl(enum usbd_event event, int param)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	switch (event) {
-+	case UDC_CTRL_PULLUP_ENABLE:
-+		if (param)
-+			gpio->GPBDAT |= (1 << 9);	/* GPB9 */
-+		else
-+			gpio->GPBDAT &= ~(1 << 9);	/* GPB9 */
-+		break;
-+	case UDC_CTRL_500mA_ENABLE:
-+		if (param)
-+			gpio->GPADAT |= (1 << 0);	/* GPA0 */
-+		else
-+			gpio->GPADAT &= ~(1 << 0);	/* GPA0 */
-+		break;
-+	default:
-+		break;
-+	}
-+}
-+
-+#endif /* CONFIG_USB_DEVICE */
-Index: u-boot/board/hxd8/pcf50606.c
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/pcf50606.c
-@@ -0,0 +1,67 @@
-+
-+#include <common.h>
-+#include <pcf50606.h>
-+
-+/* initial register set for PCF50606 in HXD8 devices */
-+const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = {
-+	[PCF50606_REG_OOCS] 	= 0x00,
-+	/* gap */
-+	[PCF50606_REG_INT1M]	= PCF50606_INT1_SECOND,
-+	[PCF50606_REG_INT2M]	= PCF50606_INT2_CHGFOK |
-+				  PCF50606_INT2_CHGERR |
-+				  PCF50606_INT2_CHGFRDY |
-+				  PCF50606_INT2_CHGPROT |
-+				  PCF50606_INT2_CHGWD10S |
-+				  PCF50606_INT2_CHGWDEXP,
-+	[PCF50606_REG_INT3M]	= PCF50606_INT3_TSCPRES,
-+	[PCF50606_REG_OOCC1] 	= PCF50606_OOCC1_RTCWAK |
-+				  PCF50606_OOCC1_CHGWAK &
-+				  PCF50606_OOCC1_EXTONWAK_NO_WAKEUP,
-+	[PCF50606_REG_OOCC2]	= PCF50606_OOCC2_ONKEYDB_14ms |
-+				  PCF50606_OOCC2_EXTONDB_14ms,
-+	/* gap */
-+	[PCF50606_REG_PSSC]	= 0x00,
-+	[PCF50606_REG_PWROKM]	= 0x00,
-+	/* gap */
-+	[PCF50606_REG_DCDC1]	= 0xf0,	/* CORE_1V3: on */
-+	[PCF50606_REG_DCDC2]	= 0x00,
-+	[PCF50606_REG_DCDC3]	= 0x00,
-+	[PCF50606_REG_DCDC4]	= 0x30, /* 1.25A */
-+
-+	[PCF50606_REG_DCDEC1]	= 0xe8, /* IO1_3V3: off */
-+	[PCF50606_REG_DCDEC2]	= 0x00,
-+
-+	[PCF50606_REG_DCUDC1]	= 0x08, /* RF_3V3: off */
-+	[PCF50606_REG_DCUDC2]	= 0x30, /* 1.25A current limit */
-+
-+	[PCF50606_REG_IOREGC]	= 0xf8, /* AUDIO_3V3: on */
-+
-+	[PCF50606_REG_D1REGC1]	= 0xf8, /* RC_3V3: on */
-+
-+	[PCF50606_REG_D2REGC1]	= 0x18, /* GPS_3V3: off */
-+
-+	[PCF50606_REG_D3REGC1]	= 0xf8, /* IO2_3V3: off */
-+
-+	[PCF50606_REG_LPREGC1]	= 0xf8, /* LCM_3V3: on */
-+	[PCF50606_REG_LPREGC2]	= 0x00,
-+
-+	[PCF50606_REG_MBCC1]	= 0x00, /* charger unused */
-+	[PCF50606_REG_MBCC2]	= 0x00,	/* unlimited charging */
-+	[PCF50606_REG_MBCC3]	= 0x1a, /* 0.2*Ifast, 4.20V */
-+	[PCF50606_REG_BBCC]	= 0x1f, /* 400uA */
-+	[PCF50606_REG_ADCC1]	= 0x00,
-+	[PCF50606_REG_ADCC2]	= 0x00,
-+	/* gap */
-+	[PCF50606_REG_ACDC1]	= 0x00,
-+	[PCF50606_REG_BVMC]	= PCF50606_BVMC_THRSHLD_3V3,
-+	[PCF50606_REG_PWMC1]	= 0x1f,	/* clock: 512 DC: 15/16*/
-+	[PCF50606_REG_LEDC1]	= 0x00,
-+	[PCF50606_REG_LEDC2]	= 0x00,
-+	[PCF50606_REG_GPOC1]	= 0x03,	/* PWM ACTIVE */
-+	[PCF50606_REG_GPOC2]	= 0x07,	/* back light pull low */
-+	[PCF50606_REG_GPOC3]	= 0x00,
-+	[PCF50606_REG_GPOC4]	= 0x00,
-+	[PCF50606_REG_GPOC5]	= 0x00,
-+};
-+
-+
-Index: u-boot/board/hxd8/config.mk
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/config.mk
-@@ -0,0 +1,27 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+#
-+# FIC HXD8 board with S3C2440X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+CONFIG_USB_DFU_VENDOR=0x1457
-+CONFIG_USB_DFU_PRODUCT=0x511a
-+CONFIG_USB_DFU_REVISION=0x0100
-+
-+#
-+# HXD81v011 or later has 1 bank of 128 MB SDRAM
-+#
-+# 	3000'0000 to 3800'0000
-+# we load ourself to 37F8'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# download area is 3200'0000 or 3300'0000
-+
-+# FIXME: TEXT_BASE = 0x37F80000
-+TEXT_BASE = 0x33F80000
-Index: u-boot/board/hxd8/u-boot.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/u-boot.lds
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/arm920t/start.o	(.text)
-+	  cpu/arm920t/s3c24x0/nand_read.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/board/hxd8/lowlevel_foo.S
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/lowlevel_foo.S
-@@ -0,0 +1,87 @@
-+
-+_start:
-+	b 	reset
-+undefvec:
-+	b	undefvec
-+swivec:
-+	b	swivec
-+pabtvec:
-+	b	pabtvec
-+dabtvec:
-+	b	dabtvec
-+rsvdvec:
-+	b	rsvdvec
-+irqvec:
-+	b	irqvec
-+fiqvec:
-+	b	fiqvec
-+
-+reset:
-+	/*
-+	 * set the cpu to SVC32 mode
-+	 */
-+	mrs	r0,cpsr
-+	bic	r0,r0,#0x1f
-+	orr	r0,r0,#0xd3
-+	msr	cpsr,r0
-+
-+/* turn off the watchdog */
-+#define pWTCON		0x53000000
-+#define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
-+#define INTSUBMSK	0x4A00001C
-+#define CLKDIVN	0x4C000014	/* clock divisor register */
-+#define CAMDIVN	0x4C000018
-+
-+	ldr     r0, =pWTCON
-+	mov     r1, #0x0
-+	str     r1, [r0]
-+
-+	mov	r1, #0xffffffff
-+	ldr	r0, =INTMSK
-+	str	r1, [r0]
-+	ldr	r1, =0x7ff
-+	ldr	r0, =INTSUBMSK
-+	str	r1, [r0]
-+
-+	/* FCLK:HCLK:PCLK = 1:3:6 */
-+	ldr	r0, =CAMDIVN
-+	mov	r1, #0
-+	str	r1, [r0]
-+
-+	/* FCLK:HCLK:PCLK = 1:3:6 */
-+	ldr	r0, =CLKDIVN
-+	mov	r1, #7
-+	str	r1, [r0]
-+
-+	bl	cpu_init_crit
-+	ldr	r0,=TEXT_BASE
-+	mov	pc, r0
-+
-+cpu_init_crit:
-+	/*
-+	 * flush v4 I/D caches
-+	 */
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-+
-+	/*
-+	 * disable MMU stuff and caches
-+	 */
-+	mrc	p15, 0, r0, c1, c0, 0
-+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-+	mcr	p15, 0, r0, c1, c0, 0
-+
-+	/*
-+	 * before relocating, we have to setup RAM timing
-+	 * because memory timing is board-dependend, you will
-+	 * find a lowlevel_init.S in your board directory.
-+	 */
-+	mov	ip, lr
-+	bl	lowlevel_init
-+	mov	lr, ip
-+	mov	pc, lr
-+
-Index: u-boot/board/hxd8/lowlevel_foo.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/hxd8/lowlevel_foo.lds
-@@ -0,0 +1,56 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  lowlevel_foo.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/cpu/arm920t/s3c24x0/nand.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c
-+++ u-boot/cpu/arm920t/s3c24x0/nand.c
-@@ -83,6 +83,59 @@
- #define	NFDATA		__REGb(NF_BASE + oNFDATA)
- #define	NFSTAT		__REGb(NF_BASE + oNFSTAT)
- 
-+#if defined(CONFIG_HXD8)
-+static int hxd8_nand_dev_ready(struct mtd_info *mtd)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+	u_int32_t val = gpio->GPCDAT;
-+
-+	switch (nand_curr_device) {
-+		case 0:
-+			return (NFSTAT & 0x01);
-+		case 1:	/* RnB 3 */
-+			return ((val>>6) & 0x01);
-+		case 2:	/* RnB 4 */
-+			return ((val>>7) & 0x01);
-+		case 3:	/* RnB 2 */
-+			return  ((val>>5) & 0x01);
-+		default:
-+			return 0;
-+	}
-+}
-+
-+/* 4G Nand flash chip select function */
-+static void hxd8_nand_select_chip(struct nand_chip *this, int chip)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	if (chip == 0)
-+		gpio->GPGDAT &=  ~(1 << 1);
-+	else
-+		gpio->GPGDAT |=  (1 << 1);
-+
-+	if (chip == 1)
-+		gpio->GPADAT &=  ~(1 << 15);
-+	else
-+		gpio->GPADAT |= (1 << 15);
-+
-+	if (chip == 2)
-+		gpio->GPADAT &=  ~(1 << 16);
-+	else
-+		gpio->GPADAT |=  (1 << 16);
-+
-+	if (chip == 3)
-+		gpio->GPADAT &=  ~(1 << 14);
-+	else
-+		gpio->GPADAT |= (1 << 14);
-+
-+	/* UGLY: ew don't have mtd_info pointer, but know that
-+	 * s3c24xx hwcontrol function does not use it for CLRNCE */
-+	if (chip == -1)
-+		this->hwcontrol(NULL, NAND_CTL_CLRNCE);
-+	else
-+		this->hwcontrol(NULL, NAND_CTL_SETNCE);
-+}
-+#endif
- 
- static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
- {
-@@ -251,6 +304,11 @@
- 	nand->eccmode = NAND_ECC_SOFT;
- #endif
- 
-+#if defined(CONFIG_HXD8)
-+	nand->dev_ready = hxd8_nand_dev_ready;
-+	nand->select_chip = hxd8_nand_select_chip;
-+#endif
-+
- #ifdef CONFIG_S3C2410_NAND_BBT
- 	nand->options = NAND_USE_FLASH_BBT | NAND_DONT_CREATE_BBT;
- #else
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-license.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-license.patch
deleted file mode 100644
index fa8db6f69d..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-license.patch
+++ /dev/null
@@ -1,712 +0,0 @@
-Index: u-boot/common/Makefile
-===================================================================
---- u-boot.orig/common/Makefile
-+++ u-boot/common/Makefile
-@@ -34,7 +34,7 @@
- 	  cmd_dynenv.o cmd_eeprom.o cmd_elf.o cmd_ext2.o \
- 	  cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \
- 	  cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \
--	  cmd_load.o cmd_log.o \
-+	  cmd_license.o cmd_load.o cmd_log.o \
- 	  cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
- 	  cmd_nand.o cmd_net.o cmd_nvedit.o \
- 	  cmd_pci.o cmd_pcmcia.o cmd_portio.o \
-Index: u-boot/common/cmd_license.c
-===================================================================
---- /dev/null
-+++ u-boot/common/cmd_license.c
-@@ -0,0 +1,57 @@
-+/*
-+ * (C) Copyright 2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_LICENSE)
-+
-+#define LICENSE_MAX	20480
-+#include <command.h>
-+#include <malloc.h>
-+#include <license.h>
-+int gunzip(void *, int, unsigned char *, unsigned long *);
-+
-+int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	char *tok, *dst = malloc(LICENSE_MAX);
-+	unsigned long len = LICENSE_MAX;
-+
-+	if (!dst)
-+		return -1;
-+
-+	if (gunzip(dst, LICENSE_MAX, gpl_gz, &len) != 0) {
-+		printf("Error uncompressing license text\n");
-+		free(dst);
-+		return -1;
-+	}
-+	puts(dst);
-+	free(dst);
-+
-+	return 0;
-+}
-+
-+U_BOOT_CMD(license, 1, 1, do_license,
-+	   "license - print GPL license text\n",
-+	   NULL);
-+
-+#endif /* CFG_CMD_LICENSE */
-Index: u-boot/include/cmd_confdefs.h
-===================================================================
---- u-boot.orig/include/cmd_confdefs.h
-+++ u-boot/include/cmd_confdefs.h
-@@ -75,6 +75,7 @@
- #define CFG_CMD_FPGA	0x0000010000000000ULL	/* FPGA configuration Support	*/
- #define CFG_CMD_HWFLOW	0x0000020000000000ULL	/* RTS/CTS hw flow control	*/
- #define CFG_CMD_SAVES	0x0000040000000000ULL	/* save S record dump		*/
-+#define CFG_CMD_LICENSE	0x0000080000000000ULL	/* Display GPL License		*/
- #define CFG_CMD_SPI	0x0000100000000000ULL	/* SPI utility			*/
- #define CFG_CMD_FDOS	0x0000200000000000ULL	/* Floppy DOS support		*/
- #define CFG_CMD_VFD	0x0000400000000000ULL	/* VFD support (TRAB)		*/
-Index: u-boot/include/license.h
-===================================================================
---- /dev/null
-+++ u-boot/include/license.h
-@@ -0,0 +1,584 @@
-+/* bin2header converting 'gpl.gz' */
-+unsigned char gpl_gz[] = {
-+	0x1f, 0x8b, 0x08, 0x08, 0xb2, 0x10, 0x0d, 0x46, 0x00, 0x03,
-+	0x67, 0x70, 0x6c, 0x00, 0x9d, 0x5b, 0x5d, 0x77, 0xdb, 0x46,
-+	0x92, 0x7d, 0x4e, 0xff, 0x8a, 0x3e, 0x7e, 0x89, 0x74, 0x0e,
-+	0xc3, 0xc4, 0x9e, 0x9d, 0xdd, 0x49, 0xfc, 0x44, 0x49, 0x94,
-+	0xcd, 0x1d, 0x99, 0x52, 0x48, 0xca, 0x8e, 0x1f, 0x41, 0xb2,
-+	0x29, 0x62, 0x0c, 0x02, 0x5c, 0x7c, 0x48, 0xe6, 0xbf, 0xdf,
-+	0x7b, 0xab, 0xba, 0x81, 0x06, 0x49, 0x25, 0xb3, 0x9b, 0x93,
-+	0xc4, 0x16, 0x09, 0x54, 0xd7, 0x77, 0xdd, 0xaa, 0x2e, 0xfd,
-+	0xf0, 0x83, 0xc5, 0x3f, 0x1f, 0xa6, 0x8f, 0xf6, 0xc3, 0x78,
-+	0x3a, 0x9e, 0x8d, 0xee, 0xec, 0xc3, 0xe3, 0xd5, 0xdd, 0xe4,
-+	0xda, 0xe2, 0xbf, 0xf1, 0x74, 0x3e, 0x36, 0x3f, 0xc8, 0x03,
-+	0xf8, 0xe7, 0xb3, 0x2b, 0xab, 0xb4, 0xc8, 0xed, 0xbb, 0x81,
-+	0xfd, 0xef, 0x26, 0x77, 0xf6, 0xed, 0xaf, 0xbf, 0xbe, 0x35,
-+	0xc6, 0x5e, 0x17, 0xfb, 0x43, 0x99, 0x3e, 0x6d, 0x6b, 0x7b,
-+	0x71, 0x7d, 0x89, 0x0f, 0xff, 0xf1, 0xeb, 0x40, 0xbe, 0xb2,
-+	0xb7, 0xa5, 0x73, 0x76, 0x5e, 0x6c, 0xea, 0x97, 0xa4, 0x74,
-+	0xf6, 0xb6, 0x68, 0xf2, 0x75, 0x52, 0x83, 0xc0, 0xc0, 0x4e,
-+	0xf2, 0xd5, 0x70, 0x60, 0xec, 0xdf, 0xf9, 0x4c, 0x92, 0x7f,
-+	0xcb, 0xd2, 0xdc, 0xce, 0x6b, 0x3c, 0x5d, 0x0f, 0xec, 0x6d,
-+	0xba, 0xa9, 0xb7, 0xf6, 0x36, 0x2b, 0x8a, 0x72, 0x60, 0xaf,
-+	0x8a, 0xaa, 0xe6, 0xf3, 0x9f, 0x46, 0xf6, 0x97, 0x77, 0x6f,
-+	0xdf, 0xfe, 0xf2, 0xd3, 0xdb, 0xbf, 0xfd, 0xf2, 0xd6, 0x3e,
-+	0xce, 0x47, 0xc6, 0x8e, 0x9f, 0x5d, 0x79, 0x28, 0xc0, 0x45,
-+	0x5a, 0xd9, 0xbd, 0x2b, 0x77, 0x69, 0x5d, 0xbb, 0xb5, 0xad,
-+	0x0b, 0xbb, 0x02, 0x3b, 0x36, 0xc9, 0xd7, 0x76, 0x9d, 0x56,
-+	0x75, 0x99, 0x2e, 0x9b, 0xda, 0x59, 0x3c, 0xbb, 0xc4, 0xd1,
-+	0x3b, 0x7e, 0x99, 0xba, 0xca, 0xd8, 0x62, 0x63, 0xeb, 0x2d,
-+	0xde, 0xcc, 0xd2, 0x95, 0xcb, 0x2b, 0x67, 0xd7, 0xc5, 0xaa,
-+	0xd9, 0xb9, 0x1c, 0xe7, 0xe3, 0x79, 0xbb, 0xda, 0x26, 0xf9,
-+	0x53, 0x9a, 0x3f, 0xd9, 0xb4, 0x26, 0xf9, 0xbc, 0xa8, 0x6d,
-+	0x92, 0x65, 0xc5, 0x8b, 0x5b, 0x0f, 0x0d, 0xd4, 0x21, 0xfa,
-+	0x78, 0x28, 0x5d, 0xb2, 0x5b, 0x66, 0x0e, 0x0a, 0xb0, 0x8b,
-+	0xad, 0x0b, 0x94, 0x2a, 0xbb, 0x29, 0x4a, 0xbb, 0x03, 0xdf,
-+	0xb6, 0x0a, 0x92, 0xf3, 0xbf, 0xb5, 0xab, 0xd2, 0xa7, 0x5c,
-+	0x39, 0xac, 0x93, 0x6f, 0xf8, 0xf0, 0x25, 0x39, 0xd8, 0x43,
-+	0xd1, 0x94, 0x66, 0x03, 0xc1, 0xd7, 0xc5, 0x8e, 0xdf, 0x54,
-+	0x5b, 0x79, 0x1e, 0xcc, 0x0b, 0x0b, 0x10, 0xae, 0x1e, 0x5a,
-+	0x7b, 0x75, 0x00, 0xdf, 0x79, 0x5d, 0x26, 0x15, 0xf8, 0xab,
-+	0x71, 0x96, 0x18, 0xcb, 0xe5, 0xae, 0x4c, 0x32, 0xfb, 0xd0,
-+	0x2c, 0x71, 0xb4, 0xb9, 0xf3, 0x82, 0x80, 0xdd, 0x34, 0xaf,
-+	0x5d, 0xbe, 0xd6, 0xa3, 0x9e, 0x9a, 0x04, 0x0a, 0xae, 0x61,
-+	0x07, 0x1e, 0x65, 0xff, 0xec, 0x28, 0x7e, 0x67, 0x02, 0xcf,
-+	0x3f, 0xfd, 0x84, 0x47, 0x76, 0xe4, 0xb3, 0x6a, 0xf0, 0x18,
-+	0x0f, 0x6d, 0xc5, 0xc1, 0x11, 0x7c, 0x56, 0x04, 0x85, 0x5a,
-+	0xc0, 0x63, 0x65, 0x9b, 0x0a, 0xbe, 0x31, 0xa4, 0x26, 0xd2,
-+	0xca, 0xf4, 0x59, 0xb3, 0x81, 0xb5, 0x64, 0xbf, 0xcf, 0xa0,
-+	0x7c, 0x1e, 0x2e, 0xfa, 0x11, 0x1b, 0xb8, 0xbe, 0x97, 0x98,
-+	0xce, 0x4b, 0x7e, 0xac, 0x22, 0x0d, 0xe6, 0x22, 0x4d, 0x92,
-+	0x1f, 0x6c, 0x81, 0x77, 0x4a, 0xbb, 0x2f, 0x8b, 0xa7, 0x32,
-+	0xd9, 0xd9, 0x97, 0x6d, 0x41, 0xca, 0x4d, 0xbd, 0x2d, 0xca,
-+	0x0a, 0x5a, 0xda, 0xc1, 0x0f, 0xf0, 0xa4, 0x69, 0x2a, 0x35,
-+	0x1f, 0x58, 0xba, 0x98, 0x17, 0x3b, 0xe7, 0x5f, 0x7b, 0xcd,
-+	0x23, 0x7b, 0xc2, 0xad, 0x0a, 0xb8, 0x0b, 0xd4, 0xb7, 0x3c,
-+	0x98, 0xa0, 0xec, 0x3b, 0x57, 0x41, 0x40, 0xfb, 0x8a, 0x60,
-+	0x69, 0x5e, 0xd5, 0x2e, 0x59, 0x0f, 0x2f, 0xad, 0xfd, 0x5a,
-+	0x34, 0x76, 0x95, 0xe4, 0x22, 0xeb, 0xc1, 0x2a, 0x2f, 0xa2,
-+	0x79, 0xcf, 0x70, 0x05, 0x03, 0x16, 0xc5, 0x90, 0x4e, 0xf3,
-+	0x65, 0xeb, 0x72, 0xfb, 0x02, 0xbd, 0xee, 0x5d, 0xf2, 0x8d,
-+	0xca, 0x10, 0xa5, 0x06, 0x46, 0x06, 0xfc, 0x8a, 0x0c, 0x95,
-+	0x6e, 0xe3, 0xca, 0x92, 0xd2, 0x40, 0x01, 0xde, 0x7e, 0x03,
-+	0xba, 0xa4, 0xd9, 0x97, 0x38, 0x1f, 0x02, 0xde, 0x37, 0xaf,
-+	0x71, 0x56, 0x9d, 0xb8, 0x5e, 0x6c, 0xd2, 0xa4, 0xa6, 0x53,
-+	0x98, 0x6d, 0xf2, 0xac, 0x06, 0x8e, 0x9c, 0x23, 0x0a, 0x1d,
-+	0x8d, 0x98, 0x13, 0xfe, 0xec, 0x85, 0x77, 0x9d, 0xf2, 0x49,
-+	0x3c, 0xc1, 0x48, 0x38, 0x41, 0x49, 0xcf, 0x38, 0xda, 0xa6,
-+	0x1b, 0x92, 0xb6, 0x2f, 0x69, 0xb5, 0xbd, 0x1c, 0xb4, 0x47,
-+	0x41, 0x96, 0x95, 0x4b, 0x9f, 0x49, 0xa4, 0x29, 0x57, 0x24,
-+	0xbd, 0x86, 0x61, 0x4a, 0x51, 0xd8, 0x93, 0x43, 0xa8, 0xd5,
-+	0x26, 0xbc, 0x08, 0x9f, 0xc5, 0x8f, 0xd1, 0xab, 0x7c, 0xc6,
-+	0x3b, 0x6a, 0xcf, 0x19, 0xf1, 0x3a, 0x7c, 0xcf, 0x82, 0xc7,
-+	0x95, 0x72, 0x49, 0x22, 0xb9, 0xcd, 0xdd, 0x8b, 0xf2, 0x1b,
-+	0xf4, 0xfe, 0x5e, 0x7d, 0x28, 0x90, 0xfb, 0x96, 0x17, 0x2f,
-+	0x2d, 0xdd, 0x75, 0x41, 0x9a, 0x15, 0x29, 0x43, 0xcf, 0x95,
-+	0x58, 0x67, 0x51, 0xf0, 0xd5, 0xda, 0xad, 0x6a, 0x8d, 0x1c,
-+	0x49, 0x70, 0x95, 0x58, 0x25, 0x77, 0x91, 0x2e, 0x4b, 0x47,
-+	0x4d, 0xad, 0xe8, 0x44, 0x95, 0x92, 0x87, 0x32, 0x96, 0xe9,
-+	0xda, 0xc0, 0x57, 0x99, 0x9d, 0xa8, 0x4c, 0x97, 0x4b, 0xa4,
-+	0xfb, 0x43, 0x94, 0x12, 0x19, 0xa7, 0x47, 0x57, 0xdf, 0xf4,
-+	0xab, 0x82, 0x56, 0x29, 0x19, 0xb7, 0xa5, 0x08, 0xa8, 0x4f,
-+	0x0d, 0xcd, 0x42, 0xdf, 0xe9, 0x9d, 0x82, 0x88, 0xae, 0xb2,
-+	0xa4, 0x16, 0xe2, 0x2b, 0x57, 0xd6, 0x09, 0x04, 0xc6, 0x13,
-+	0x7b, 0x7c, 0x99, 0x2e, 0xd3, 0x2c, 0xad, 0x53, 0x9f, 0x86,
-+	0x48, 0x59, 0x35, 0x6a, 0xce, 0x5a, 0x34, 0xd6, 0xe4, 0x80,
-+	0x1c, 0x79, 0xf5, 0xef, 0x8a, 0x75, 0xba, 0xa1, 0xfb, 0x8a,
-+	0x2a, 0x6e, 0xf1, 0x85, 0xfb, 0x9e, 0xec, 0xf6, 0x19, 0x1e,
-+	0xf2, 0x4f, 0x9c, 0x25, 0x57, 0x35, 0xab, 0xad, 0x4d, 0x82,
-+	0xca, 0xa1, 0xab, 0xad, 0x63, 0xd4, 0x19, 0xfc, 0x54, 0xa7,
-+	0x22, 0xb1, 0xa4, 0x0c, 0xbb, 0x71, 0x20, 0x24, 0xe7, 0x34,
-+	0x48, 0x03, 0x4f, 0xa9, 0xf7, 0x3f, 0x78, 0x47, 0x0a, 0x52,
-+	0x39, 0x94, 0xc3, 0xb4, 0xd2, 0x69, 0x41, 0xf4, 0xca, 0x30,
-+	0xb2, 0xf4, 0xd5, 0xa1, 0x46, 0x99, 0xbc, 0x7b, 0xe4, 0xce,
-+	0x78, 0xe5, 0x20, 0x01, 0x36, 0x68, 0x5d, 0x2d, 0x72, 0x2f,
-+	0x7c, 0x6b, 0x22, 0xcf, 0x03, 0x9d, 0x11, 0x5c, 0xa2, 0xe5,
-+	0xa3, 0xda, 0xc2, 0x25, 0xf0, 0xcc, 0x2e, 0x38, 0x03, 0x8a,
-+	0x0a, 0x53, 0x90, 0x50, 0x55, 0x87, 0xc1, 0xdf, 0xd2, 0xd2,
-+	0x04, 0xd3, 0x30, 0x86, 0xdd, 0x39, 0x2f, 0x81, 0xdf, 0xa3,
-+	0x84, 0xd5, 0x2f, 0xb0, 0x69, 0xed, 0xf6, 0xd5, 0x6f, 0xf6,
-+	0xe2, 0xed, 0xa5, 0x94, 0x25, 0xad, 0x92, 0x7d, 0xad, 0xc3,
-+	0x2d, 0xcd, 0xc5, 0xbb, 0x4b, 0xe8, 0x0f, 0x71, 0xee, 0xdd,
-+	0x24, 0x2a, 0x4c, 0x2f, 0xdb, 0x14, 0x4a, 0xa5, 0x8e, 0x2a,
-+	0xf9, 0x32, 0x73, 0x4f, 0x08, 0x73, 0x29, 0x78, 0x95, 0x14,
-+	0x63, 0x5f, 0xf1, 0x06, 0xb1, 0x85, 0x41, 0xf3, 0x67, 0xa9,
-+	0x42, 0x62, 0xc6, 0xf8, 0x3c, 0xe1, 0x7a, 0x94, 0x55, 0xd0,
-+	0x10, 0x6d, 0xe1, 0x12, 0x5a, 0x4c, 0xb2, 0x27, 0xd2, 0xad,
-+	0x17, 0x85, 0x54, 0x19, 0x2c, 0x10, 0x48, 0x1d, 0x5e, 0xa2,
-+	0x31, 0x38, 0xbc, 0x77, 0x38, 0x23, 0x0a, 0x77, 0xa1, 0x08,
-+	0x37, 0x74, 0xdc, 0xaa, 0xc6, 0x6b, 0x55, 0x6b, 0x0a, 0xcd,
-+	0xa6, 0x79, 0x81, 0xf7, 0x4b, 0x16, 0xa1, 0x83, 0x1c, 0x29,
-+	0xd2, 0xf5, 0x6a, 0x0d, 0x0c, 0x31, 0xd9, 0x9c, 0x94, 0x18,
-+	0x61, 0x3e, 0x95, 0x34, 0x8c, 0xcf, 0x77, 0x8e, 0xa7, 0xb8,
-+	0xac, 0xd2, 0x5a, 0xb0, 0x4f, 0x90, 0x8f, 0xc1, 0x61, 0x4e,
-+	0xfe, 0x8c, 0xcf, 0x16, 0x55, 0xec, 0x41, 0x60, 0xd7, 0x9b,
-+	0x0c, 0xcc, 0xbc, 0x04, 0xe7, 0x10, 0x07, 0x0a, 0x25, 0x9d,
-+	0x27, 0x16, 0x30, 0x49, 0x9a, 0x27, 0xd9, 0x00, 0x67, 0xa8,
-+	0x48, 0xac, 0x31, 0x50, 0x04, 0x2a, 0xfb, 0x4e, 0x4a, 0x69,
-+	0x59, 0xac, 0x9b, 0x95, 0xb2, 0x21, 0x35, 0x84, 0xd6, 0x85,
-+	0x77, 0x92, 0x00, 0x52, 0x73, 0x46, 0xd3, 0xd3, 0x0a, 0x11,
-+	0x2d, 0xe3, 0xcb, 0xd1, 0x8f, 0x78, 0x60, 0xdf, 0xd4, 0x52,
-+	0x60, 0xd4, 0x5d, 0x6e, 0xf9, 0x75, 0x76, 0x18, 0xc8, 0x21,
-+	0x71, 0x7a, 0x22, 0x4b, 0xf5, 0x16, 0x88, 0x02, 0x95, 0x1b,
-+	0x67, 0xa1, 0xda, 0x53, 0x97, 0x35, 0x4a, 0x88, 0x48, 0xef,
-+	0x6b, 0xe3, 0x9e, 0x5f, 0xd7, 0x2c, 0xb3, 0xf0, 0x3b, 0xe6,
-+	0x56, 0xc9, 0x20, 0xcf, 0x45, 0xba, 0x96, 0xf3, 0xd7, 0xcc,
-+	0x8e, 0xa5, 0x4a, 0x8c, 0xfa, 0x15, 0xdc, 0x81, 0x85, 0x11,
-+	0xc1, 0x99, 0xa8, 0xd2, 0xdb, 0xc2, 0x49, 0x21, 0xd2, 0x7c,
-+	0x9d, 0x3e, 0xa7, 0xeb, 0x86, 0x4c, 0xd9, 0x62, 0x29, 0x89,
-+	0x44, 0x0f, 0x69, 0xe1, 0x0c, 0x22, 0x3e, 0xb7, 0x0e, 0xbe,
-+	0xb9, 0x92, 0x68, 0x93, 0x3a, 0xb4, 0xed, 0xc8, 0xe0, 0x4f,
-+	0x94, 0x21, 0x57, 0x27, 0xe5, 0x61, 0xe8, 0x93, 0x26, 0x7c,
-+	0x82, 0xee, 0x02, 0x33, 0x8b, 0xf3, 0x88, 0xc6, 0x77, 0xc9,
-+	0x9a, 0x58, 0xc6, 0xae, 0x32, 0x97, 0x78, 0x0e, 0xa1, 0x02,
-+	0x2f, 0x90, 0x86, 0xdf, 0xb2, 0x85, 0x50, 0x6b, 0x75, 0x4d,
-+	0xef, 0x5a, 0x3f, 0x7a, 0xb4, 0xc1, 0x2c, 0x8f, 0x8f, 0xa9,
-+	0xf7, 0xf6, 0xb9, 0x44, 0x70, 0xd9, 0x30, 0x40, 0xb0, 0x3d,
-+	0xed, 0xdf, 0x46, 0xae, 0xd4, 0xa7, 0x02, 0x12, 0x6a, 0xd6,
-+	0x24, 0x4d, 0x06, 0x0a, 0x24, 0x18, 0x74, 0xe9, 0xcb, 0xfb,
-+	0xba, 0x51, 0x6f, 0x5b, 0x29, 0x18, 0xd8, 0x14, 0x04, 0x7b,
-+	0x02, 0xf5, 0xfe, 0x02, 0x1a, 0xe3, 0xdb, 0xc5, 0x78, 0xf6,
-+	0x69, 0x6e, 0x47, 0xd3, 0x1b, 0x7b, 0x7d, 0x3f, 0xbd, 0x99,
-+	0x2c, 0x26, 0xf7, 0xd3, 0xb9, 0xbd, 0xbd, 0x9f, 0xe1, 0xc7,
-+	0x87, 0xaf, 0x93, 0xe9, 0x87, 0x81, 0xbd, 0x99, 0xcc, 0x17,
-+	0xb3, 0xc9, 0xd5, 0x23, 0xbf, 0x92, 0x07, 0x3f, 0xdd, 0xdf,
-+	0x4c, 0x6e, 0x27, 0xd7, 0x23, 0x7e, 0x40, 0xde, 0x7f, 0x19,
-+	0x0a, 0x6e, 0x3a, 0x07, 0x94, 0xbc, 0x37, 0x8a, 0xae, 0x21,
-+	0x80, 0xa2, 0x98, 0x97, 0xa2, 0xfc, 0xe6, 0x13, 0x03, 0x71,
-+	0x21, 0xac, 0x56, 0x99, 0x84, 0x9a, 0x61, 0xe9, 0xdd, 0x67,
-+	0x89, 0x77, 0x57, 0xfa, 0x44, 0x97, 0x75, 0xb6, 0x45, 0xc6,
-+	0xda, 0x52, 0x25, 0x07, 0x0f, 0x6c, 0x77, 0xc0, 0x9f, 0x50,
-+	0x7a, 0x97, 0x36, 0xd6, 0xa6, 0x69, 0xcb, 0x8f, 0xaa, 0x30,
-+	0xa0, 0xe4, 0xf3, 0xe8, 0x62, 0xa8, 0x5a, 0x7f, 0xf3, 0xa0,
-+	0xfc, 0xbd, 0x01, 0x76, 0x76, 0xd0, 0xdb, 0xc0, 0x08, 0x64,
-+	0x69, 0xd9, 0x97, 0xaa, 0x10, 0xc9, 0x40, 0xee, 0x25, 0xed,
-+	0xc1, 0x25, 0xdf, 0x88, 0x28, 0xcb, 0x44, 0x83, 0x59, 0x4e,
-+	0x0e, 0xd4, 0xcc, 0xce, 0xa1, 0xcc, 0x59, 0x97, 0x8a, 0xc8,
-+	0xd1, 0x37, 0xa4, 0x41, 0xba, 0x60, 0x35, 0x7d, 0x86, 0xc1,
-+	0xe0, 0x5e, 0x42, 0x45, 0x99, 0xef, 0x04, 0xce, 0x92, 0x97,
-+	0xdf, 0x34, 0xa4, 0x53, 0xe1, 0x05, 0x92, 0xe3, 0x58, 0x7d,
-+	0xd6, 0xab, 0xcd, 0x7b, 0x73, 0x8f, 0xb2, 0xdd, 0x17, 0xa5,
-+	0x78, 0x81, 0x60, 0x89, 0x81, 0xf1, 0x0c, 0xb4, 0x1d, 0x04,
-+	0x25, 0x60, 0x7a, 0x8f, 0x3d, 0xa6, 0x0a, 0x19, 0xb7, 0x2d,
-+	0xcd, 0x6b, 0xa6, 0x0e, 0xca, 0x2f, 0x16, 0x33, 0x19, 0x42,
-+	0xb3, 0x49, 0x9e, 0xa8, 0xb2, 0x8b, 0x8f, 0x48, 0x8c, 0xc8,
-+	0x03, 0x1b, 0xa8, 0x78, 0xd0, 0xbe, 0xc0, 0x03, 0x05, 0xba,
-+	0xaf, 0xb2, 0x86, 0xd0, 0x9d, 0x47, 0x14, 0x0d, 0x5d, 0x1d,
-+	0x80, 0xd6, 0x7f, 0x9d, 0x9b, 0x60, 0x19, 0xfb, 0x26, 0x3e,
-+	0xfd, 0x0d, 0x81, 0xe7, 0x98, 0x99, 0xdc, 0x07, 0x86, 0x64,
-+	0xb8, 0x64, 0xbd, 0x2e, 0x9d, 0x64, 0xc9, 0xa4, 0xb2, 0x6f,
-+	0x50, 0x3a, 0xde, 0xc0, 0xa1, 0x47, 0xc8, 0xee, 0xcf, 0x8a,
-+	0x0f, 0x0a, 0xaf, 0x57, 0xe2, 0xaa, 0xd7, 0xc2, 0xa2, 0x27,
-+	0xa4, 0x60, 0x49, 0xe2, 0xce, 0x0e, 0x1f, 0xab, 0x77, 0x78,
-+	0x77, 0x78, 0xaf, 0x19, 0x56, 0x40, 0x59, 0x53, 0x57, 0xa9,
-+	0x44, 0x3c, 0x0a, 0x28, 0xa8, 0x07, 0x57, 0x49, 0x98, 0x2c,
-+	0x37, 0xa6, 0x6c, 0xf2, 0x13, 0xd5, 0xfb, 0x9c, 0x1c, 0x80,
-+	0x8e, 0x5b, 0x0f, 0x3c, 0x60, 0x13, 0x6a, 0x48, 0xa3, 0xc8,
-+	0x02, 0xc5, 0x2e, 0x7e, 0xc5, 0x44, 0x50, 0xbd, 0xc8, 0x89,
-+	0xb6, 0x37, 0x72, 0x20, 0x6d, 0x2b, 0x25, 0x40, 0xb2, 0x68,
-+	0x5a, 0x4b, 0x41, 0xb4, 0x27, 0x8e, 0x66, 0xc2, 0xc9, 0x17,
-+	0xc8, 0x82, 0x6e, 0x4f, 0xe4, 0x95, 0x4b, 0x4f, 0x82, 0x84,
-+	0x45, 0xe6, 0x96, 0x0e, 0xf0, 0x5c, 0xf2, 0x16, 0xe4, 0x3c,
-+	0xc3, 0xf1, 0xe5, 0xd0, 0x7c, 0x51, 0x7c, 0x63, 0x5b, 0x27,
-+	0x2b, 0x1b, 0xa2, 0x6d, 0xd2, 0xaa, 0x78, 0x4a, 0x28, 0x3b,
-+	0xad, 0x90, 0xeb, 0xc2, 0x69, 0x21, 0x78, 0x3b, 0x54, 0x0c,
-+	0x93, 0x1c, 0xfe, 0x9d, 0x76, 0x35, 0x40, 0x35, 0x4f, 0xe6,
-+	0xc7, 0x2a, 0x86, 0x31, 0x34, 0x6f, 0x8c, 0xad, 0x89, 0x9a,
-+	0xd3, 0x5c, 0x22, 0x64, 0x87, 0x22, 0xd0, 0x00, 0x87, 0x21,
-+	0xf8, 0x90, 0xe5, 0x5d, 0x07, 0x7f, 0x0d, 0x55, 0xb3, 0x4f,
-+	0x57, 0x4d, 0xd1, 0x54, 0x99, 0x9e, 0x8e, 0x9c, 0x23, 0xa9,
-+	0x1c, 0xbe, 0x8b, 0x4f, 0xf6, 0x0c, 0x74, 0xd4, 0x17, 0x08,
-+	0x21, 0x10, 0xc1, 0x33, 0x19, 0x3f, 0x65, 0xba, 0x48, 0xf3,
-+	0x99, 0xc7, 0x0b, 0xb1, 0xca, 0x92, 0x74, 0x07, 0xad, 0x80,
-+	0xe9, 0x50, 0xf8, 0xdf, 0xdb, 0x6f, 0xce, 0xed, 0x19, 0x12,
-+	0xf4, 0x00, 0x0f, 0xee, 0x8c, 0xbe, 0x56, 0x85, 0x82, 0x45,
-+	0xf8, 0xc3, 0xe6, 0xb8, 0x97, 0x09, 0xb5, 0xef, 0xa3, 0xf0,
-+	0xc9, 0xb2, 0x72, 0x39, 0x4e, 0x61, 0x29, 0x83, 0x6c, 0x2d,
-+	0x69, 0xc3, 0x67, 0x04, 0x43, 0x76, 0xdd, 0x61, 0x84, 0x03,
-+	0xfa, 0xaa, 0x83, 0x23, 0x88, 0x28, 0x21, 0xb1, 0xf9, 0x73,
-+	0x4c, 0x92, 0x15, 0xb0, 0xae, 0xc2, 0xb6, 0xee, 0x69, 0x98,
-+	0xaa, 0xb5, 0x92, 0x36, 0x3a, 0x82, 0x5d, 0x3d, 0x8c, 0x41,
-+	0xaa, 0xdd, 0x1e, 0x2a, 0x04, 0x47, 0xe6, 0xfd, 0x5a, 0x83,
-+	0x39, 0x74, 0x6b, 0x7a, 0x92, 0xe2, 0xbb, 0x83, 0xa7, 0x92,
-+	0x78, 0x98, 0x58, 0xec, 0x7d, 0x86, 0xa1, 0xcc, 0x2d, 0x3a,
-+	0x8a, 0xe0, 0x17, 0x6b, 0xee, 0xf7, 0xd0, 0x97, 0x07, 0xcc,
-+	0x2c, 0x9e, 0xf3, 0xae, 0xf3, 0x1c, 0x0f, 0xef, 0x84, 0xa2,
-+	0x4a, 0x55, 0x9e, 0x77, 0x98, 0x90, 0x31, 0x7d, 0x66, 0x33,
-+	0x9a, 0xd9, 0xf0, 0x44, 0x23, 0x65, 0x71, 0xa7, 0xec, 0xbe,
-+	0x9a, 0x8a, 0x07, 0xbe, 0x94, 0xaa, 0x9f, 0xc6, 0x38, 0x53,
-+	0x52, 0x7b, 0x3f, 0x11, 0xfa, 0x04, 0x6f, 0xcf, 0x94, 0x92,
-+	0xb9, 0x17, 0xee, 0xad, 0x49, 0x96, 0x88, 0xdb, 0x33, 0x7e,
-+	0x09, 0xd7, 0x00, 0xde, 0xde, 0x39, 0xa7, 0x4e, 0xa2, 0x52,
-+	0x54, 0x2e, 0x2a, 0xe3, 0xbf, 0x51, 0x07, 0xd6, 0x26, 0x97,
-+	0x5d, 0x0f, 0xb0, 0x4a, 0x9a, 0x4a, 0x1b, 0x88, 0x16, 0x32,
-+	0x6e, 0xd2, 0x4c, 0xcb, 0xe7, 0x0a, 0xba, 0x15, 0xc5, 0x42,
-+	0x46, 0x86, 0xb7, 0x77, 0x39, 0xa1, 0x51, 0x31, 0xaf, 0x4a,
-+	0x4c, 0x87, 0x16, 0x53, 0xf4, 0xad, 0x39, 0x47, 0x29, 0x84,
-+	0x0c, 0xb4, 0x66, 0xb3, 0xe5, 0x1d, 0x4f, 0x9f, 0x1a, 0x2a,
-+	0x1f, 0xcb, 0x13, 0x3e, 0xc4, 0x37, 0xa9, 0x80, 0x96, 0x6c,
-+	0xa4, 0x2f, 0x28, 0xc7, 0x47, 0x96, 0xef, 0x6c, 0x91, 0xd3,
-+	0x49, 0xe6, 0x05, 0xc5, 0x59, 0xbe, 0x15, 0xfc, 0x55, 0xd6,
-+	0x6d, 0x59, 0x97, 0xcf, 0x2a, 0x2d, 0x75, 0x94, 0xeb, 0x28,
-+	0x05, 0x7a, 0xc3, 0x0a, 0x0d, 0x79, 0x4f, 0x50, 0x77, 0xb1,
-+	0x61, 0x0f, 0xd4, 0x03, 0x54, 0xc8, 0x11, 0x89, 0x3f, 0x25,
-+	0xa1, 0x16, 0x82, 0x3f, 0xb3, 0x44, 0x49, 0x34, 0xa6, 0xe5,
-+	0xba, 0xa5, 0x42, 0x07, 0x7a, 0x0d, 0x09, 0x84, 0xd2, 0xaf,
-+	0xe2, 0xaf, 0x2e, 0x03, 0x72, 0x6f, 0x55, 0x1f, 0x0a, 0x7d,
-+	0x0e, 0xbf, 0x12, 0x58, 0x09, 0x50, 0xbb, 0xd6, 0xc9, 0x8c,
-+	0x34, 0x07, 0x1c, 0x4e, 0x95, 0x09, 0xcb, 0x10, 0xf2, 0x8c,
-+	0x17, 0x1e, 0x89, 0x16, 0x09, 0x36, 0x6a, 0x09, 0x55, 0x95,
-+	0xf4, 0x51, 0xf9, 0x12, 0x96, 0x2a, 0x59, 0x52, 0x43, 0x16,
-+	0x66, 0x44, 0xd0, 0xf5, 0xe4, 0xf5, 0x88, 0xa0, 0x60, 0xc4,
-+	0x34, 0xf7, 0x0c, 0x71, 0xc2, 0x54, 0xae, 0x51, 0x69, 0x4b,
-+	0x66, 0x0b, 0xe9, 0x0b, 0xc1, 0x5d, 0xca, 0x24, 0x5f, 0xd2,
-+	0x28, 0x00, 0x4a, 0x74, 0x68, 0xf5, 0xa7, 0x3c, 0x2f, 0x1a,
-+	0x64, 0x17, 0x8e, 0x00, 0x7d, 0x11, 0x96, 0xa0, 0xe8, 0x65,
-+	0x3c, 0x7b, 0x36, 0xe3, 0x25, 0x42, 0xc0, 0x7f, 0xf0, 0x7a,
-+	0xeb, 0x73, 0x41, 0x48, 0x8b, 0xf6, 0x65, 0x10, 0x10, 0x58,
-+	0xeb, 0x1f, 0x3e, 0x0a, 0x94, 0x8f, 0xf6, 0x85, 0xcb, 0x6e,
-+	0x5e, 0x21, 0xb3, 0x35, 0x89, 0xf8, 0x08, 0xd5, 0xab, 0xc7,
-+	0x07, 0x6d, 0x8b, 0xb9, 0x84, 0xc2, 0x71, 0xc0, 0xf8, 0x32,
-+	0xea, 0xb2, 0x2c, 0xd4, 0x2f, 0x92, 0xb3, 0xd2, 0xeb, 0x16,
-+	0xf6, 0x39, 0x75, 0x2f, 0x47, 0x39, 0x51, 0xa8, 0x74, 0x08,
-+	0xef, 0x62, 0xfc, 0x7d, 0xe5, 0x24, 0x5d, 0xfd, 0xc6, 0x02,
-+	0xdb, 0x2b, 0xd9, 0x75, 0xe5, 0xb2, 0x4d, 0x98, 0x38, 0x06,
-+	0x1b, 0x80, 0x37, 0x21, 0xc1, 0x5a, 0x27, 0x25, 0xbd, 0xf5,
-+	0x04, 0x55, 0xbe, 0x0e, 0x09, 0xf2, 0x9e, 0xca, 0x07, 0x9a,
-+	0xc4, 0x7a, 0x19, 0x28, 0x48, 0x73, 0x8a, 0x10, 0xfe, 0xa7,
-+	0x49, 0x4b, 0x9d, 0xc0, 0x28, 0xc5, 0x23, 0x62, 0xc3, 0x4b,
-+	0xd3, 0x4e, 0x4d, 0xe4, 0xd1, 0x9d, 0x8e, 0x14, 0x64, 0x22,
-+	0xe7, 0x8b, 0x49, 0xeb, 0xae, 0x72, 0x64, 0x17, 0x1d, 0xd2,
-+	0x8a, 0x9a, 0x94, 0x50, 0x00, 0xdf, 0x27, 0x68, 0x02, 0x6d,
-+	0xe5, 0xfc, 0xd8, 0x45, 0xf4, 0xc3, 0x66, 0x52, 0x5e, 0x51,
-+	0x2c, 0xf4, 0x6a, 0x64, 0x0e, 0xa4, 0x2c, 0x71, 0xf2, 0xb0,
-+	0x24, 0x1f, 0x49, 0x55, 0xe4, 0xa0, 0x26, 0x73, 0x5c, 0x22,
-+	0xa3, 0x52, 0x00, 0x62, 0x07, 0x3b, 0xf8, 0x70, 0xe5, 0x10,
-+	0x7c, 0x74, 0x33, 0x1e, 0x50, 0x79, 0xb8, 0xb7, 0x83, 0x8a,
-+	0x9f, 0xd9, 0x85, 0xd5, 0x0c, 0x84, 0x38, 0x04, 0xd5, 0xb0,
-+	0x04, 0x3c, 0x12, 0xa1, 0x03, 0x4e, 0xb1, 0x64, 0x50, 0xdd,
-+	0xc9, 0x59, 0xa0, 0xb2, 0xb5, 0xec, 0x4b, 0x24, 0x1d, 0xe5,
-+	0x23, 0x99, 0x76, 0x24, 0xd5, 0xd1, 0xd1, 0x9c, 0x38, 0x37,
-+	0x75, 0xfb, 0x82, 0x39, 0xf2, 0xb9, 0x2a, 0xd9, 0x45, 0x5a,
-+	0xc1, 0xdb, 0x92, 0x79, 0xa4, 0xc3, 0xd4, 0x0c, 0xa3, 0x9d,
-+	0x49, 0x5a, 0xf5, 0x6a, 0x8a, 0x39, 0xae, 0x29, 0x92, 0x57,
-+	0x63, 0xbc, 0xe9, 0x6b, 0x96, 0xd2, 0x08, 0x2d, 0xa1, 0x7f,
-+	0x2b, 0x24, 0x21, 0xd3, 0xd7, 0x80, 0x4e, 0x7f, 0xbb, 0x61,
-+	0x88, 0x76, 0x79, 0x8a, 0x01, 0x02, 0x16, 0x46, 0x0b, 0xf1,
-+	0x9d, 0xf3, 0x70, 0x6f, 0x7a, 0x43, 0xd3, 0x96, 0xfe, 0x98,
-+	0x80, 0x31, 0x1b, 0x29, 0x16, 0x3a, 0x0c, 0xc1, 0x07, 0xd2,
-+	0x7a, 0xaa, 0x58, 0xa5, 0x7b, 0x4a, 0xca, 0x35, 0x6a, 0x81,
-+	0xd8, 0x1f, 0x2f, 0xd9, 0x17, 0x56, 0x69, 0x1d, 0x8d, 0x2d,
-+	0xf0, 0xe2, 0x20, 0xba, 0x23, 0x20, 0xa7, 0x32, 0x7c, 0xaf,
-+	0xdb, 0x7c, 0xe9, 0xf5, 0x24, 0xb5, 0x88, 0xb8, 0x28, 0x9a,
-+	0xfe, 0x09, 0x4e, 0xad, 0x6a, 0x13, 0x0f, 0x8e, 0xf0, 0x98,
-+	0x36, 0x77, 0x25, 0xaf, 0x33, 0x00, 0x02, 0x84, 0x59, 0x1d,
-+	0x03, 0xe0, 0xb9, 0xf7, 0x16, 0x56, 0xda, 0x4a, 0xdf, 0xd0,
-+	0x1d, 0x25, 0xdd, 0x8d, 0x71, 0xdf, 0x5d, 0xa9, 0xcd, 0x6f,
-+	0x18, 0x9b, 0xe9, 0x64, 0x88, 0x03, 0x8c, 0xec, 0xac, 0xb2,
-+	0xa3, 0xfe, 0xa9, 0x28, 0x81, 0xe6, 0x32, 0xce, 0x32, 0x42,
-+	0x37, 0x55, 0x9d, 0x45, 0x02, 0x90, 0x79, 0x92, 0xb3, 0xb3,
-+	0x48, 0xf5, 0x1a, 0x67, 0xc7, 0x44, 0x97, 0x3c, 0x3d, 0x51,
-+	0x4b, 0x81, 0xac, 0x6f, 0x79, 0x54, 0x0e, 0x6a, 0xe5, 0x1c,
-+	0x21, 0x73, 0x0c, 0xb5, 0x24, 0x3f, 0xca, 0x87, 0x7f, 0x02,
-+	0x44, 0x2e, 0xf9, 0x73, 0x62, 0x9f, 0x8b, 0xac, 0xe1, 0x44,
-+	0x7f, 0x83, 0xa6, 0xb7, 0xaa, 0x8b, 0x12, 0x7d, 0x95, 0x4f,
-+	0xe9, 0x9d, 0x7c, 0x0a, 0x7d, 0xbb, 0x24, 0xb4, 0x2c, 0x43,
-+	0xfa, 0x8b, 0xb8, 0xd3, 0xac, 0x29, 0x3e, 0xcd, 0x26, 0xe5,
-+	0x6c, 0x91, 0xfb, 0xdb, 0x9f, 0x23, 0xf5, 0x63, 0x11, 0x8e,
-+	0xb9, 0x67, 0x07, 0xa9, 0xb5, 0x34, 0xa0, 0x9f, 0x77, 0x97,
-+	0x2c, 0x51, 0xc5, 0xf2, 0x5f, 0x9c, 0xa8, 0x84, 0x09, 0x38,
-+	0xac, 0xb7, 0x6a, 0x6a, 0xc9, 0x37, 0x04, 0x64, 0x67, 0xca,
-+	0xaf, 0x99, 0x87, 0x88, 0x7b, 0x2b, 0x3c, 0xbc, 0xb3, 0x02,
-+	0xa2, 0x5e, 0xc3, 0x50, 0x48, 0x06, 0x1c, 0x98, 0xf9, 0x98,
-+	0xd2, 0x81, 0x06, 0x34, 0xd0, 0xc1, 0xa7, 0xd1, 0x0a, 0x25,
-+	0x79, 0x4f, 0xb4, 0x02, 0xff, 0x6d, 0xad, 0xc1, 0xcf, 0x32,
-+	0x27, 0xa5, 0xae, 0xd4, 0x89, 0xb2, 0xd4, 0xc1, 0x1d, 0x22,
-+	0x03, 0x00, 0xea, 0x27, 0xd6, 0x72, 0x32, 0xa9, 0xf8, 0xa9,
-+	0xeb, 0x41, 0x06, 0x3e, 0xe6, 0x43, 0xd4, 0x46, 0x33, 0x85,
-+	0x3f, 0x01, 0x82, 0x5a, 0x6a, 0xfa, 0xe2, 0x88, 0x81, 0xbd,
-+	0xf1, 0x56, 0xa0, 0x56, 0xec, 0x92, 0x32, 0x85, 0xff, 0x37,
-+	0x61, 0x2c, 0xd4, 0x8d, 0x08, 0x59, 0x73, 0x14, 0x8c, 0xbd,
-+	0x87, 0x0a, 0x07, 0x2d, 0x20, 0x3b, 0x95, 0x2c, 0x69, 0xe3,
-+	0x49, 0x10, 0xf7, 0xc0, 0x3e, 0x27, 0x59, 0xaa, 0xe4, 0xa0,
-+	0xb3, 0x0c, 0xd9, 0xb9, 0x96, 0xe9, 0x9b, 0xca, 0x75, 0x70,
-+	0x49, 0x29, 0xd7, 0x34, 0x5d, 0x57, 0x21, 0xf8, 0x48, 0x12,
-+	0xc2, 0x61, 0xe0, 0xf1, 0xb8, 0x07, 0x50, 0x39, 0xef, 0xb2,
-+	0x74, 0xfc, 0x9c, 0xeb, 0x6d, 0x9e, 0xe0, 0x22, 0x7f, 0xbd,
-+	0x15, 0x1a, 0x04, 0x16, 0x3f, 0x57, 0x06, 0xa8, 0xed, 0x15,
-+	0x17, 0xfb, 0xeb, 0x40, 0x8a, 0xb0, 0xea, 0x5e, 0x28, 0x1c,
-+	0x6b, 0x3c, 0x2a, 0xd1, 0xc7, 0xc6, 0xe9, 0xd9, 0x41, 0x70,
-+	0x9f, 0xd6, 0xdf, 0x7f, 0xcf, 0x06, 0xaf, 0xeb, 0x5f, 0x25,
-+	0xf9, 0x7f, 0xd8, 0x60, 0xf5, 0x9a, 0x77, 0xa5, 0x39, 0x55,
-+	0xa0, 0x99, 0x22, 0x6a, 0x59, 0x05, 0x9e, 0xfa, 0xc2, 0x2c,
-+	0x06, 0xd2, 0xd2, 0x7f, 0x74, 0x0b, 0xf5, 0x8a, 0xc8, 0x84,
-+	0x28, 0x32, 0x3c, 0x4b, 0x32, 0xf0, 0x92, 0x6b, 0x3e, 0xf3,
-+	0x28, 0xc6, 0xdf, 0xd9, 0xea, 0x74, 0x60, 0x23, 0xc3, 0xc3,
-+	0x9c, 0x40, 0x94, 0x99, 0x12, 0x5d, 0xdb, 0xc9, 0xb4, 0x23,
-+	0x4c, 0x11, 0x58, 0xf4, 0xf8, 0x7e, 0xcb, 0x5f, 0x0c, 0xb5,
-+	0xfe, 0x3a, 0x78, 0x45, 0xde, 0x16, 0x9f, 0x26, 0xad, 0xd7,
-+	0xb1, 0x2b, 0x87, 0x5e, 0x4a, 0x9d, 0xee, 0xd8, 0x79, 0xb3,
-+	0x0c, 0xd5, 0x61, 0xa9, 0xda, 0xf7, 0xc8, 0xa5, 0x77, 0x3d,
-+	0xb6, 0xe9, 0x92, 0x8a, 0x0e, 0xc4, 0x94, 0x17, 0xb9, 0x14,
-+	0x54, 0x73, 0xec, 0xda, 0xca, 0xc9, 0x87, 0x78, 0x15, 0xe7,
-+	0xe7, 0xb4, 0xfd, 0xc6, 0x0c, 0xfa, 0x94, 0xeb, 0xd0, 0x5b,
-+	0xe9, 0x19, 0x62, 0xa6, 0x75, 0x20, 0xd7, 0x86, 0xbe, 0x9e,
-+	0x6e, 0xe4, 0x74, 0x3d, 0x32, 0xdc, 0xc6, 0x9c, 0xf0, 0x85,
-+	0xcf, 0x71, 0x48, 0xc3, 0x56, 0x29, 0xed, 0x9a, 0x16, 0x34,
-+	0x76, 0x59, 0x53, 0x49, 0x63, 0x92, 0x54, 0x55, 0xb1, 0x4a,
-+	0xc3, 0x3c, 0x0c, 0x21, 0x90, 0xd0, 0xf1, 0xdd, 0x26, 0xcd,
-+	0x53, 0x9d, 0xb4, 0xb2, 0xcd, 0xf2, 0xcf, 0x6b, 0x1e, 0x2e,
-+	0xd3, 0xbd, 0x5e, 0x27, 0xb3, 0x60, 0x9b, 0x50, 0xbf, 0xc8,
-+	0x5c, 0xea, 0xc7, 0x64, 0x02, 0x7b, 0x38, 0x1f, 0xcf, 0xb2,
-+	0x24, 0x06, 0x0e, 0x9d, 0x44, 0x90, 0xf2, 0x23, 0x0c, 0xff,
-+	0x4c, 0xa5, 0x13, 0xdb, 0x99, 0x6a, 0xef, 0xc4, 0xe2, 0x2e,
-+	0x60, 0xd9, 0xc1, 0x89, 0x3c, 0x71, 0xb8, 0xc8, 0x05, 0x1f,
-+	0xab, 0x86, 0x1f, 0xc7, 0xf1, 0x2e, 0x4f, 0xae, 0x06, 0xdb,
-+	0x49, 0x4f, 0x8b, 0x69, 0xe3, 0xd7, 0x2e, 0xd8, 0xb5, 0xeb,
-+	0xb4, 0xd0, 0x53, 0x86, 0x8e, 0x96, 0xd2, 0x80, 0x18, 0xda,
-+	0xe9, 0xb2, 0x8b, 0x84, 0x5d, 0xf2, 0x2f, 0x41, 0x00, 0x3b,
-+	0x78, 0xb4, 0xa0, 0xd3, 0x0b, 0x95, 0x90, 0x1c, 0x7f, 0x83,
-+	0x1b, 0xbb, 0x4c, 0xa1, 0x49, 0xc5, 0x34, 0x7e, 0xe9, 0x25,
-+	0x34, 0xa8, 0x51, 0xa5, 0xf6, 0xac, 0xd5, 0xa1, 0xaa, 0x01,
-+	0xdd, 0x64, 0xc6, 0xc4, 0xc4, 0xdb, 0x97, 0x9f, 0x8d, 0x12,
-+	0xb4, 0xda, 0xe4, 0x82, 0x5b, 0x84, 0xe7, 0xf6, 0x28, 0xe3,
-+	0x51, 0x7b, 0xe2, 0x23, 0x54, 0xe6, 0xcc, 0x7d, 0xed, 0xa1,
-+	0xc8, 0x6f, 0x4e, 0xd0, 0x42, 0x44, 0x9d, 0x10, 0x2b, 0x8a,
-+	0x00, 0xde, 0xd5, 0xf8, 0x31, 0x99, 0x38, 0x3a, 0xf8, 0x33,
-+	0xa0, 0x2e, 0x47, 0xfb, 0x6d, 0x0c, 0x41, 0xc7, 0x89, 0xbf,
-+	0x88, 0x16, 0x6f, 0x90, 0x29, 0xb5, 0x47, 0xb5, 0xe1, 0x2d,
-+	0x4b, 0xb8, 0x8e, 0xd4, 0x4c, 0x2e, 0x8f, 0x08, 0x9c, 0x78,
-+	0x5f, 0x80, 0xdb, 0x02, 0x46, 0x85, 0x18, 0xbe, 0x68, 0x04,
-+	0xe7, 0x57, 0xe6, 0x1c, 0xac, 0xec, 0x65, 0x49, 0x5e, 0x51,
-+	0x10, 0x1f, 0x37, 0x4f, 0xdb, 0x28, 0xb7, 0xa7, 0xfe, 0xbe,
-+	0x5c, 0x67, 0x9c, 0xbb, 0x3d, 0x7a, 0xa6, 0x68, 0xa3, 0x24,
-+	0x22, 0x72, 0x34, 0x2d, 0x8a, 0x94, 0x21, 0x90, 0xe1, 0x3f,
-+	0x3a, 0xc8, 0x40, 0x27, 0xd2, 0x31, 0x90, 0x0e, 0x6b, 0xd0,
-+	0xfd, 0xc9, 0x08, 0x5d, 0xe1, 0x6b, 0x0c, 0x5a, 0x7a, 0x50,
-+	0xc2, 0xa8, 0xa3, 0xd2, 0x79, 0xdd, 0xf7, 0x3d, 0xc7, 0xb8,
-+	0xd2, 0x3e, 0xf9, 0x4a, 0x1f, 0xb2, 0x79, 0x84, 0x54, 0x78,
-+	0x95, 0xc9, 0xf1, 0x12, 0x9c, 0x62, 0x5f, 0x1b, 0x81, 0x38,
-+	0x2f, 0x02, 0x06, 0x8b, 0x57, 0x8f, 0x7f, 0xfd, 0x74, 0xa6,
-+	0x4f, 0x5e, 0x2a, 0xa9, 0x0b, 0xca, 0x45, 0x51, 0xd2, 0xb0,
-+	0x0a, 0xd4, 0xbe, 0x96, 0xb1, 0x88, 0xa4, 0xb4, 0x63, 0xef,
-+	0xd2, 0xf3, 0x0c, 0x5b, 0xa6, 0x0d, 0xc3, 0xa0, 0x5f, 0x22,
-+	0x68, 0xb9, 0x11, 0x6a, 0x73, 0xab, 0x4e, 0xac, 0x44, 0x19,
-+	0xe1, 0x8e, 0x5d, 0xac, 0xcb, 0x02, 0x11, 0x00, 0x5a, 0x34,
-+	0x11, 0x6c, 0x2f, 0xdf, 0xc2, 0xda, 0x42, 0x5a, 0x76, 0xab,
-+	0x37, 0x2d, 0x63, 0x12, 0x39, 0x62, 0x25, 0x76, 0x37, 0x4c,
-+	0xc5, 0x81, 0x01, 0xb4, 0x83, 0xbc, 0xe5, 0xc2, 0xbf, 0x9b,
-+	0x26, 0xd3, 0xc4, 0x92, 0xa5, 0x09, 0x5a, 0x47, 0x31, 0xdd,
-+	0xdf, 0xd5, 0x74, 0xa1, 0xbb, 0x8b, 0x7b, 0x4d, 0x7a, 0xe4,
-+	0xbe, 0x3e, 0x6a, 0xc1, 0xaa, 0x94, 0x23, 0xc9, 0x70, 0x33,
-+	0x2d, 0x9e, 0xe3, 0x77, 0x2d, 0x24, 0xd7, 0xb6, 0xe2, 0x13,
-+	0x13, 0x8b, 0x87, 0xf3, 0x02, 0xf3, 0x89, 0x0d, 0xbe, 0x0e,
-+	0x6d, 0xfb, 0xf7, 0xb8, 0x7e, 0xa0, 0x87, 0x0c, 0xfe, 0x8a,
-+	0x61, 0x38, 0x0d, 0xaa, 0xab, 0xe3, 0x9b, 0x0f, 0xdd, 0xbb,
-+	0x61, 0xc3, 0x9b, 0x84, 0xa6, 0xac, 0x94, 0x1b, 0xba, 0x6d,
-+	0xba, 0x4c, 0x6b, 0x1d, 0xd4, 0x67, 0xc9, 0x4b, 0x7b, 0x75,
-+	0xef, 0xfb, 0xc4, 0x53, 0x79, 0x94, 0x0e, 0x6a, 0x4b, 0xc1,
-+	0x8b, 0xe9, 0xe5, 0x41, 0x6f, 0xc5, 0x64, 0x5a, 0xd1, 0xc3,
-+	0xd7, 0x47, 0xa3, 0xfb, 0x0b, 0x3f, 0x5e, 0x7c, 0x75, 0xc4,
-+	0x7e, 0xa9, 0xa3, 0x1d, 0xde, 0x36, 0xae, 0x5a, 0xaf, 0xd1,
-+	0xf3, 0x13, 0x3f, 0xd2, 0xed, 0xd9, 0xb8, 0x16, 0xfc, 0xca,
-+	0x3b, 0x6a, 0xce, 0x1b, 0xc3, 0x8a, 0xd1, 0xff, 0xe5, 0x56,
-+	0x4f, 0x39, 0x6e, 0xd9, 0x37, 0x47, 0x4a, 0x3c, 0xea, 0x70,
-+	0xfc, 0x9e, 0xc3, 0x7f, 0x0e, 0xf5, 0x16, 0xa5, 0x4e, 0x77,
-+	0xce, 0xe3, 0x93, 0x3f, 0x43, 0xfa, 0x7f, 0x21, 0x71, 0x1d,
-+	0x6f, 0x34, 0x1c, 0x05, 0x90, 0x77, 0x7e, 0x76, 0xc8, 0x21,
-+	0x1a, 0x43, 0x46, 0x33, 0xe1, 0x16, 0xd9, 0x7f, 0xa3, 0x6b,
-+	0x22, 0x1a, 0xc4, 0xfd, 0x49, 0x62, 0x74, 0xbb, 0x1f, 0xf8,
-+	0x42, 0x74, 0x4b, 0x2a, 0xaa, 0x79, 0x97, 0xed, 0x5e, 0xb9,
-+	0x09, 0x0d, 0xfb, 0x13, 0x3e, 0x3d, 0xa5, 0x28, 0x0c, 0x7e,
-+	0x6e, 0xb9, 0x69, 0x4a, 0xb9, 0xad, 0xea, 0x6d, 0x9b, 0xf8,
-+	0x16, 0xac, 0x1b, 0xa9, 0xff, 0x68, 0xdb, 0x5e, 0xd3, 0xe7,
-+	0x56, 0x9f, 0x00, 0xc4, 0xaf, 0xa1, 0x8a, 0xad, 0x5c, 0x70,
-+	0x0d, 0x4d, 0x3f, 0x92, 0xfc, 0x7a, 0x8a, 0x82, 0x24, 0x34,
-+	0xb6, 0xf8, 0xff, 0x8a, 0x76, 0xea, 0x22, 0xd0, 0x5f, 0x28,
-+	0x45, 0xd9, 0x58, 0xe4, 0x38, 0x6a, 0xc8, 0xfe, 0x6b, 0x68,
-+	0x27, 0x1b, 0xad, 0xeb, 0x32, 0x4d, 0x41, 0x88, 0xb6, 0xf7,
-+	0x02, 0xac, 0x01, 0x68, 0xda, 0xff, 0xd5, 0xac, 0x9f, 0x64,
-+	0x92, 0xa7, 0x18, 0x25, 0x6a, 0x4e, 0xf5, 0xc2, 0xd9, 0x00,
-+	0x88, 0xb2, 0xe0, 0xb8, 0xf0, 0xd0, 0xc6, 0xdb, 0x33, 0xdc,
-+	0x1e, 0x70, 0x5c, 0x63, 0x2f, 0xf4, 0xaa, 0x79, 0x97, 0xfa,
-+	0xbd, 0x42, 0x7f, 0x59, 0x8d, 0x70, 0x6d, 0x5c, 0x75, 0x39,
-+	0x30, 0x91, 0x17, 0x0a, 0x16, 0x16, 0x3d, 0x8a, 0x23, 0xd0,
-+	0x77, 0x2e, 0xfc, 0xf2, 0x0b, 0x85, 0x52, 0xae, 0x00, 0xfc,
-+	0x04, 0x90, 0xa0, 0x5b, 0x0e, 0x07, 0x77, 0x99, 0xfa, 0x32,
-+	0x94, 0x69, 0xae, 0xf9, 0x21, 0x4c, 0x6a, 0x0f, 0xf4, 0xdb,
-+	0x23, 0x8e, 0x62, 0x64, 0xa0, 0x97, 0x6d, 0x1a, 0xcb, 0x2c,
-+	0x17, 0x1c, 0x7d, 0xf2, 0xdc, 0xb6, 0x32, 0xbe, 0xfe, 0xae,
-+	0xee, 0x5b, 0xf8, 0xe5, 0x27, 0xbe, 0x1e, 0x4f, 0xf4, 0x0b,
-+	0x0f, 0xc6, 0x2b, 0xae, 0xec, 0xc0, 0xbd, 0xaa, 0x74, 0xd7,
-+	0x64, 0x08, 0x53, 0xa7, 0x57, 0x45, 0x7a, 0x7d, 0x81, 0x1a,
-+	0xf2, 0xe4, 0x61, 0x65, 0x97, 0xf5, 0x4d, 0x7c, 0x69, 0x13,
-+	0x6d, 0xea, 0x39, 0xd8, 0x52, 0x86, 0xef, 0xd1, 0x6b, 0xbe,
-+	0xf2, 0x9f, 0x18, 0x91, 0xc8, 0x3b, 0x38, 0xe6, 0x2b, 0xb1,
-+	0xe7, 0xef, 0xfc, 0x4f, 0xd7, 0x92, 0x92, 0x60, 0xdd, 0x76,
-+	0x75, 0xa6, 0x68, 0x32, 0xc5, 0x71, 0xba, 0x1f, 0x6a, 0xcb,
-+	0xe2, 0x80, 0x2e, 0xe1, 0xf0, 0x93, 0xec, 0x13, 0x44, 0xc1,
-+	0x1d, 0xc1, 0x84, 0x70, 0x0a, 0x92, 0x9f, 0xa2, 0xde, 0x42,
-+	0x76, 0x70, 0x8a, 0xf6, 0x7a, 0xcd, 0x5f, 0xb0, 0xac, 0x51,
-+	0x16, 0x56, 0xdc, 0xcf, 0x90, 0xa1, 0x7d, 0xfb, 0x13, 0xba,
-+	0x48, 0x01, 0x15, 0x90, 0x43, 0x45, 0x94, 0xcc, 0x23, 0x7d,
-+	0x85, 0x5f, 0xf7, 0xa4, 0x33, 0x80, 0xab, 0xa0, 0xde, 0x25,
-+	0x94, 0x44, 0xec, 0xac, 0x73, 0xa8, 0xb8, 0xce, 0xc9, 0x63,
-+	0x4b, 0x26, 0x43, 0xde, 0xa7, 0x97, 0x2c, 0x5a, 0xed, 0x34,
-+	0x48, 0x8c, 0xfc, 0x27, 0xec, 0x2b, 0x84, 0x8b, 0xae, 0x7c,
-+	0x4e, 0xe6, 0x51, 0xf8, 0xeb, 0xd6, 0x65, 0x04, 0xd2, 0xda,
-+	0x0b, 0x73, 0x8d, 0x2e, 0xd7, 0xa0, 0x74, 0x02, 0xf2, 0xb4,
-+	0xf4, 0x0a, 0x09, 0x06, 0xe3, 0xaa, 0xc9, 0x12, 0x64, 0xda,
-+	0xb4, 0x5c, 0x35, 0xbb, 0x4a, 0xb2, 0xb6, 0x66, 0xb8, 0x65,
-+	0x92, 0x75, 0x29, 0xdc, 0xc5, 0xe4, 0xa3, 0x2d, 0x54, 0xa3,
-+	0x33, 0xc9, 0x70, 0x9b, 0x12, 0x1e, 0x8a, 0x2e, 0x25, 0x8e,
-+	0xb6, 0x56, 0xfd, 0xf6, 0x64, 0xae, 0x2e, 0x64, 0xe2, 0x63,
-+	0x79, 0x7f, 0x3a, 0xe9, 0x4d, 0xdc, 0xf6, 0x4d, 0x29, 0x19,
-+	0xec, 0xcc, 0xc8, 0x0d, 0x96, 0x69, 0x7c, 0x7d, 0x96, 0x9f,
-+	0x34, 0xea, 0xa3, 0xd5, 0x93, 0xaa, 0x5b, 0xaa, 0xe0, 0x98,
-+	0x1f, 0xae, 0x7a, 0xf0, 0xc3, 0x33, 0x99, 0xd6, 0x85, 0x2d,
-+	0x3d, 0x3f, 0xaa, 0xd3, 0xb9, 0x41, 0x5a, 0x1f, 0xfc, 0x5d,
-+	0x90, 0x91, 0x59, 0xb6, 0x3e, 0xf9, 0xbe, 0x7f, 0xf8, 0x36,
-+	0xf1, 0x0d, 0x0d, 0xa5, 0x8b, 0x38, 0x0c, 0x77, 0x7c, 0x7e,
-+	0x8d, 0x86, 0x42, 0x3f, 0x95, 0x9e, 0x62, 0xed, 0x77, 0x30,
-+	0xbb, 0xfe, 0xba, 0x67, 0x62, 0xc5, 0xfc, 0x83, 0x76, 0xbc,
-+	0x6a, 0x52, 0xba, 0x3e, 0x33, 0x89, 0x96, 0xf8, 0xbd, 0x2e,
-+	0x67, 0x04, 0xef, 0xdf, 0xcb, 0x40, 0x9e, 0x0a, 0xb3, 0xf6,
-+	0x93, 0xd8, 0xd1, 0x15, 0x78, 0xbe, 0xdb, 0xc7, 0x31, 0x4f,
-+	0xdc, 0xea, 0x40, 0x58, 0x6b, 0xd6, 0xf1, 0xc7, 0xb4, 0x9d,
-+	0xf8, 0x0b, 0x2f, 0xf0, 0x4b, 0xb9, 0x81, 0xe4, 0x6a, 0xdf,
-+	0x09, 0x4b, 0x6e, 0x6d, 0x82, 0xb7, 0x4b, 0xea, 0xf2, 0x2d,
-+	0x89, 0xac, 0x22, 0xfa, 0x7c, 0x5e, 0xe4, 0x3a, 0xef, 0xae,
-+	0x24, 0x71, 0xca, 0x56, 0xcb, 0x2a, 0x6a, 0xd9, 0x12, 0x80,
-+	0x25, 0x79, 0xe9, 0xbd, 0x9f, 0xa1, 0x36, 0xfb, 0xf6, 0xb2,
-+	0x57, 0x36, 0xa8, 0x7e, 0x5e, 0x17, 0xb9, 0x1a, 0x60, 0x8d,
-+	0xea, 0xb3, 0x96, 0xb5, 0x52, 0xd9, 0xb3, 0xb2, 0xd5, 0x56,
-+	0x7c, 0x86, 0x60, 0x50, 0xca, 0x7b, 0x6f, 0x56, 0xd0, 0xf2,
-+	0x1a, 0xf8, 0xeb, 0x92, 0x91, 0x67, 0x52, 0x97, 0x4f, 0xda,
-+	0x6d, 0x09, 0x9f, 0x06, 0x7d, 0x25, 0xd4, 0x44, 0xbc, 0x2d,
-+	0x52, 0xc1, 0x84, 0x8b, 0xa3, 0xa8, 0x89, 0xdd, 0x54, 0xf6,
-+	0xe1, 0xc8, 0x28, 0x4f, 0xe1, 0x70, 0x5f, 0xb6, 0x9b, 0x5e,
-+	0x7c, 0x8f, 0xb8, 0x84, 0x1a, 0xdc, 0xb3, 0x06, 0xc0, 0xd2,
-+	0x9d, 0x56, 0x2b, 0xad, 0xaa, 0x55, 0x7d, 0x92, 0x9e, 0x59,
-+	0xe5, 0xfe, 0x31, 0x0c, 0x37, 0x6b, 0xc7, 0x53, 0x8a, 0x9f,
-+	0xfd, 0xc6, 0xeb, 0x51, 0xc2, 0x4a, 0xab, 0x68, 0x77, 0x82,
-+	0x97, 0x07, 0x61, 0x31, 0x54, 0xda, 0xa2, 0x92, 0x39, 0xcb,
-+	0xf7, 0xa6, 0x74, 0x95, 0xce, 0xf9, 0x97, 0x87, 0xee, 0x5a,
-+	0x2b, 0xee, 0xd2, 0x35, 0x45, 0x77, 0x68, 0xe4, 0x64, 0x91,
-+	0x88, 0x49, 0x51, 0x1a, 0xaf, 0xaa, 0xc7, 0xc7, 0x69, 0x17,
-+	0x20, 0x09, 0x3d, 0x59, 0xaf, 0x75, 0xea, 0x40, 0x1f, 0x80,
-+	0xb5, 0x9f, 0x1c, 0x1f, 0xdf, 0x6f, 0xe5, 0xfa, 0xbc, 0x27,
-+	0x62, 0xb4, 0xf1, 0x82, 0xb2, 0xa6, 0x17, 0x71, 0x46, 0xf3,
-+	0x70, 0x2b, 0xca, 0x40, 0xd7, 0x32, 0x93, 0xba, 0xff, 0x6a,
-+	0xef, 0x37, 0x01, 0x74, 0x98, 0x93, 0x0b, 0x06, 0xd8, 0xa1,
-+	0x13, 0x30, 0x9d, 0x22, 0x34, 0x73, 0x34, 0x95, 0x3f, 0xc0,
-+	0xad, 0x59, 0x11, 0x73, 0xbd, 0x99, 0x5a, 0x25, 0x5a, 0x5c,
-+	0xa3, 0x54, 0x0c, 0x8c, 0x5f, 0x20, 0x80, 0x79, 0x41, 0x52,
-+	0x49, 0x3e, 0x8f, 0x58, 0x44, 0x98, 0xc3, 0x29, 0xc3, 0x78,
-+	0xd1, 0xdf, 0x3d, 0x2e, 0x8b, 0xf5, 0xc9, 0x8a, 0x81, 0x58,
-+	0xf5, 0xd7, 0xa1, 0xac, 0xc1, 0xbc, 0xba, 0x85, 0x4e, 0x4d,
-+	0x85, 0xd5, 0x8b, 0xd2, 0x3d, 0xa7, 0x72, 0x75, 0xab, 0x26,
-+	0xe7, 0x42, 0xf3, 0xb3, 0xfe, 0xfe, 0x45, 0x65, 0xbc, 0xed,
-+	0x5f, 0x59, 0x47, 0x57, 0x08, 0x40, 0x10, 0xcb, 0x68, 0xc2,
-+	0x9f, 0x10, 0x6f, 0x4e, 0xd9, 0x62, 0x1a, 0x12, 0x3b, 0xf4,
-+	0x4b, 0x14, 0xf8, 0x94, 0xb9, 0x1d, 0xbc, 0x57, 0xfb, 0xb4,
-+	0x94, 0x95, 0xf5, 0x30, 0x64, 0xaa, 0x18, 0xb7, 0xfe, 0x0d,
-+	0xfd, 0xcd, 0x08, 0x72, 0x08, 0xd8, 0xc9, 0xbd, 0x05, 0xbc,
-+	0xb0, 0x76, 0x70, 0xb1, 0x4c, 0x32, 0xbc, 0x6e, 0x1b, 0xc9,
-+	0x11, 0xed, 0xf6, 0xa4, 0x5e, 0x72, 0xc0, 0x11, 0x65, 0xfd,
-+	0x51, 0xb0, 0xb5, 0x27, 0x46, 0x53, 0x71, 0xba, 0xca, 0x69,
-+	0x23, 0x4d, 0x08, 0x1b, 0x37, 0x10, 0x9a, 0x69, 0x31, 0x3c,
-+	0x91, 0x37, 0xbb, 0xa5, 0x2b, 0xbb, 0xdd, 0xd0, 0xd0, 0x1a,
-+	0xcb, 0x2c, 0x67, 0x23, 0xbd, 0xfa, 0xd1, 0xb3, 0x27, 0x7d,
-+	0x84, 0x66, 0xca, 0x68, 0x9b, 0xce, 0x17, 0xda, 0x37, 0xcc,
-+	0xdd, 0xdc, 0xd2, 0x2a, 0x03, 0x85, 0x37, 0x83, 0xae, 0x89,
-+	0x93, 0x8a, 0x1d, 0x16, 0x34, 0xba, 0xd1, 0x79, 0x34, 0x3e,
-+	0xed, 0xe3, 0xe9, 0xb0, 0x21, 0x16, 0xee, 0x07, 0x03, 0x53,
-+	0x45, 0x19, 0x56, 0x06, 0x7a, 0x47, 0x05, 0x03, 0x77, 0x3b,
-+	0x7a, 0x74, 0x07, 0x73, 0xc6, 0x1d, 0x4e, 0x64, 0xef, 0xae,
-+	0x33, 0x54, 0x09, 0x87, 0x73, 0x2a, 0x38, 0xba, 0x22, 0x3b,
-+	0xb4, 0x0b, 0x2c, 0x45, 0x80, 0xf9, 0xe1, 0x15, 0xb6, 0xa6,
-+	0xe7, 0xb9, 0x39, 0xf7, 0xeb, 0x18, 0xba, 0xb7, 0xf4, 0xcb,
-+	0x30, 0x60, 0xc7, 0xb0, 0x7f, 0x1a, 0x45, 0x87, 0x40, 0x85,
-+	0x93, 0xe5, 0x13, 0x59, 0x84, 0xd3, 0xf4, 0x1b, 0x6f, 0xa0,
-+	0x56, 0xfe, 0xf6, 0xae, 0x17, 0xc1, 0x47, 0x98, 0x5a, 0x3d,
-+	0x4d, 0x2e, 0x88, 0x19, 0x62, 0xae, 0x5f, 0x1e, 0x8c, 0xdf,
-+	0x9f, 0x27, 0x7a, 0xef, 0x1a, 0x69, 0x8f, 0x0c, 0xdb, 0x22,
-+	0xd0, 0xde, 0x46, 0xc6, 0x69, 0xee, 0x2f, 0x34, 0x7f, 0x74,
-+	0xdc, 0x6b, 0xf1, 0xfa, 0x5e, 0x7e, 0x7d, 0xa3, 0xd8, 0x39,
-+	0x06, 0x59, 0x65, 0xa4, 0x1c, 0xb4, 0x23, 0xc6, 0xaa, 0xdd,
-+	0x76, 0xf6, 0xbf, 0xa2, 0xc1, 0x1a, 0x26, 0x7a, 0x97, 0x11,
-+	0x06, 0x22, 0x0f, 0x2e, 0xbf, 0xee, 0x78, 0xe1, 0xba, 0xf8,
-+	0x53, 0x91, 0x64, 0x12, 0xdd, 0x12, 0x7b, 0xe5, 0x73, 0x70,
-+	0x3b, 0x45, 0x05, 0x48, 0x39, 0x8d, 0xae, 0xf2, 0xe2, 0xfd,
-+	0x6e, 0x06, 0x20, 0x1f, 0x85, 0x5f, 0xee, 0xe9, 0xfd, 0xca,
-+	0x8c, 0x52, 0x2a, 0x76, 0x45, 0xdb, 0xb2, 0xf3, 0x97, 0x7e,
-+	0x74, 0xb1, 0x61, 0x8d, 0x04, 0xe3, 0xcb, 0x48, 0xfb, 0xca,
-+	0x93, 0xe6, 0x93, 0xec, 0xd0, 0xfd, 0x96, 0xd3, 0xf4, 0xde,
-+	0x7e, 0x19, 0xcd, 0x66, 0xa3, 0xe9, 0xe2, 0xab, 0xd8, 0xff,
-+	0xed, 0xd0, 0x5e, 0x8d, 0xaf, 0x47, 0x8f, 0xf3, 0xb1, 0x5d,
-+	0x7c, 0x1c, 0xdb, 0x87, 0xd9, 0xfd, 0x87, 0xd9, 0xe8, 0x93,
-+	0x9d, 0xcc, 0xc3, 0x4a, 0xec, 0x8d, 0xbd, 0x9d, 0x8d, 0xc7,
-+	0xf6, 0xfe, 0xd6, 0x5e, 0x7f, 0x1c, 0xcd, 0x3e, 0x8c, 0x07,
-+	0x7c, 0x6e, 0x36, 0xe6, 0x13, 0x31, 0x2d, 0x2e, 0xc8, 0x46,
-+	0x04, 0xf0, 0xd4, 0xbd, 0xfc, 0x3c, 0xfe, 0x63, 0x31, 0x9e,
-+	0x2e, 0xec, 0xc3, 0x78, 0xf6, 0x69, 0xb2, 0x58, 0x80, 0xda,
-+	0xd5, 0x57, 0x3b, 0x7a, 0x78, 0x00, 0xf1, 0xd1, 0xd5, 0xdd,
-+	0xd8, 0xde, 0x8d, 0xbe, 0x40, 0x9b, 0xe3, 0x3f, 0xae, 0xc7,
-+	0x0f, 0x0b, 0xfb, 0xe5, 0xe3, 0x78, 0x6a, 0xee, 0x49, 0xfe,
-+	0xcb, 0x04, 0xfc, 0xcc, 0x17, 0x23, 0xbe, 0x30, 0x99, 0xda,
-+	0x2f, 0xb3, 0xc9, 0x62, 0x32, 0xfd, 0x20, 0x04, 0xb9, 0x85,
-+	0x3b, 0x9b, 0x7c, 0xf8, 0xb8, 0xb0, 0x1f, 0xef, 0xef, 0x6e,
-+	0xc6, 0x33, 0x59, 0xd5, 0xfd, 0x19, 0xa7, 0xcb, 0x8b, 0xf6,
-+	0x61, 0x34, 0x5b, 0x4c, 0xc6, 0x73, 0x03, 0x3e, 0x3e, 0x4f,
-+	0x6e, 0xfa, 0x42, 0xbd, 0x19, 0xcd, 0xc1, 0xf6, 0x1b, 0xfb,
-+	0x65, 0xb2, 0xf8, 0x78, 0xff, 0xb8, 0x68, 0x99, 0xa7, 0x70,
-+	0xa3, 0xe9, 0x57, 0xfb, 0xcf, 0xc9, 0xf4, 0x66, 0x60, 0xc7,
-+	0x13, 0x21, 0x34, 0xfe, 0xe3, 0x61, 0x36, 0x9e, 0x43, 0x7e,
-+	0x03, 0xda, 0x93, 0x4f, 0xe0, 0x78, 0x8c, 0x2f, 0x27, 0xd3,
-+	0xeb, 0xbb, 0xc7, 0x1b, 0xd9, 0x02, 0xbe, 0x02, 0x85, 0xe9,
-+	0xfd, 0x02, 0x7a, 0x82, 0x64, 0xe0, 0x73, 0x71, 0x2f, 0xaa,
-+	0x09, 0xcf, 0x06, 0xea, 0x60, 0x06, 0xf4, 0xcd, 0xa7, 0xf1,
-+	0x0c, 0xfa, 0x9b, 0x2e, 0x46, 0x57, 0x93, 0xbb, 0x09, 0x8e,
-+	0xe4, 0xda, 0xf0, 0xed, 0x64, 0x31, 0xc5, 0x11, 0xb2, 0x5c,
-+	0x3c, 0x52, 0xce, 0xaf, 0x1f, 0xef, 0x46, 0x10, 0xe2, 0x71,
-+	0xf6, 0x70, 0x3f, 0x1f, 0x73, 0x7c, 0x43, 0x15, 0x82, 0x08,
-+	0x14, 0x3e, 0x9b, 0xcc, 0xff, 0x69, 0x47, 0x73, 0xe3, 0x15,
-+	0xfb, 0xfb, 0xe3, 0xa8, 0x25, 0x04, 0xed, 0x82, 0xc6, 0xa7,
-+	0xd1, 0xf4, 0x5a, 0x0c, 0x75, 0x64, 0x48, 0x8a, 0x6b, 0xbf,
-+	0xde, 0x3f, 0xb2, 0x6a, 0x40, 0xee, 0xbb, 0x1b, 0x3e, 0x60,
-+	0xc2, 0x03, 0x54, 0xd4, 0xd8, 0xde, 0x8c, 0x6f, 0xc7, 0xd7,
-+	0x8b, 0xc9, 0x67, 0x98, 0x17, 0x4f, 0xe2, 0x98, 0xf9, 0xe3,
-+	0xa7, 0xb1, 0xd7, 0xf7, 0x7c, 0x21, 0x0a, 0xba, 0xbb, 0xb3,
-+	0xd3, 0xf1, 0x35, 0xf8, 0x1d, 0xcd, 0xbe, 0xda, 0xf9, 0x78,
-+	0xf6, 0x79, 0x72, 0x4d, 0x3d, 0x98, 0xd9, 0xf8, 0x61, 0x34,
-+	0x81, 0xfa, 0xb9, 0x20, 0x3d, 0x9b, 0x91, 0xca, 0xfd, 0x54,
-+	0x73, 0xcb, 0xbb, 0x21, 0x8d, 0x07, 0x2f, 0x19, 0x7f, 0xa6,
-+	0x0f, 0x3c, 0x4e, 0xef, 0x28, 0xed, 0x6c, 0xfc, 0xfb, 0x23,
-+	0xe4, 0x39, 0xe3, 0x09, 0xa4, 0x31, 0xfa, 0x00, 0x6f, 0xa3,
-+	0x32, 0x23, 0xbb, 0x9b, 0x2f, 0x13, 0x1c, 0x4e, 0x0b, 0x1d,
-+	0x1b, 0x7f, 0x20, 0xaf, 0xe0, 0x8b, 0xce, 0xf8, 0x5f, 0xe1,
-+	0x46, 0xf7, 0xf6, 0xd3, 0xe8, 0xab, 0x6e, 0x65, 0x7f, 0xf5,
-+	0xee, 0x01, 0x36, 0xdb, 0xb5, 0xed, 0xbe, 0x57, 0xc0, 0x29,
-+	0x3a, 0xef, 0x1c, 0x5d, 0xdd, 0x53, 0x07, 0x57, 0xe0, 0x67,
-+	0x22, 0x6c, 0x81, 0x11, 0x2a, 0x84, 0x26, 0xba, 0x19, 0x7d,
-+	0x1a, 0x7d, 0x18, 0xcf, 0x07, 0xa6, 0x75, 0x02, 0x39, 0xda,
-+	0x6f, 0x92, 0x0f, 0xec, 0xfc, 0x61, 0x7c, 0x3d, 0xe1, 0x5f,
-+	0xf0, 0x3d, 0x5c, 0x0f, 0xb6, 0xbe, 0x53, 0xad, 0x20, 0x8a,
-+	0x7e, 0x7f, 0xa4, 0x15, 0xf1, 0x81, 0x27, 0x62, 0x47, 0x30,
-+	0x27, 0x45, 0xa3, 0x1f, 0x7a, 0x93, 0x31, 0x06, 0xe9, 0x6b,
-+	0xd3, 0xe0, 0x23, 0x38, 0xfb, 0x38, 0x2e, 0x2f, 0xba, 0xb3,
-+	0x8f, 0xfc, 0x8f, 0x7e, 0x71, 0x77, 0x3f, 0xa7, 0xb3, 0xe1,
-+	0x90, 0xc5, 0xc8, 0x0a, 0xc7, 0xf8, 0xf3, 0x6a, 0xcc, 0xa7,
-+	0x67, 0xe3, 0x29, 0xf4, 0x25, 0xe1, 0x34, 0xba, 0xbe, 0x7e,
-+	0x9c, 0x21, 0xb4, 0xf8, 0x04, 0xdf, 0x00, 0x37, 0xf3, 0x47,
-+	0x04, 0xdb, 0x64, 0x2a, 0x46, 0x31, 0x94, 0x57, 0xa2, 0x79,
-+	0x32, 0xbb, 0x09, 0xf1, 0x24, 0x7a, 0xb6, 0xb7, 0xa3, 0xc9,
-+	0xdd, 0xe3, 0xec, 0xc4, 0xc7, 0x70, 0xf2, 0x3d, 0x54, 0x48,
-+	0x92, 0xe2, 0x6b, 0xad, 0x41, 0x82, 0x93, 0xcd, 0x2f, 0x07,
-+	0xe2, 0x03, 0x76, 0x72, 0x8b, 0xa3, 0xae, 0x3f, 0x7a, 0xeb,
-+	0xd9, 0x5e, 0xd4, 0x7e, 0xb5, 0x1f, 0x61, 0x8a, 0xab, 0x31,
-+	0x1e, 0x1b, 0xdd, 0x7c, 0x9e, 0x30, 0xf3, 0xe8, 0x39, 0x06,
-+	0xb1, 0x30, 0x9f, 0x78, 0x9d, 0xdc, 0x7b, 0x0a, 0x5e, 0x8f,
-+	0xed, 0x4e, 0x3f, 0xa2, 0x44, 0x9f, 0x3f, 0xb3, 0xbd, 0x6f,
-+	0xfe, 0x17, 0x84, 0xf3, 0x1b, 0xef, 0x12, 0x3b, 0x00, 0x00,
-+	
-+};
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -110,6 +110,7 @@
- 			CFG_CMD_MMC	 | \
- 			CFG_CMD_FAT	 | \
- 			CFG_CMD_EXT2	 | \
-+			CFG_CMD_LICENSE	 | \
- 			0)
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-Index: u-boot/include/configs/hxd8.h
-===================================================================
---- u-boot.orig/include/configs/hxd8.h
-+++ u-boot/include/configs/hxd8.h
-@@ -110,6 +110,7 @@
- 			CFG_CMD_MMC	 | \
- 			CFG_CMD_FAT	 | \
- 			CFG_CMD_EXT2	 | \
-+			CFG_CMD_LICENSE	 | \
- 			0)
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-Index: u-boot/include/configs/smdk2440.h
-===================================================================
---- u-boot.orig/include/configs/smdk2440.h
-+++ u-boot/include/configs/smdk2440.h
-@@ -110,6 +110,7 @@
- 			CFG_CMD_PORTIO	 | \
- 			CFG_CMD_REGINFO  | \
- 			CFG_CMD_SAVES	 | \
-+			CFG_CMD_LICENSE	 | \
- 			CFG_CMD_USB)
- 
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-machtypes.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-machtypes.patch
deleted file mode 100644
index db3cee6e99..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-machtypes.patch
+++ /dev/null
@@ -1,4121 +0,0 @@
-This adds a more recent version of mach-types.h to u-boot
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/include/asm-arm/mach-types.h
-===================================================================
---- u-boot.orig/include/asm-arm/mach-types.h
-+++ u-boot/include/asm-arm/mach-types.h
-@@ -424,7 +424,7 @@
- #define MACH_TYPE_MPORT3S              411
- #define MACH_TYPE_RA_ALPHA             412
- #define MACH_TYPE_XCEP                 413
--#define MACH_TYPE_ARCOM_MERCURY        414
-+#define MACH_TYPE_ARCOM_VULCAN         414
- #define MACH_TYPE_STARGATE             415
- #define MACH_TYPE_ARMADILLOJ           416
- #define MACH_TYPE_ELROY_JACK           417
-@@ -457,7 +457,7 @@
- #define MACH_TYPE_XM250                444
- #define MACH_TYPE_T6TC1XB              445
- #define MACH_TYPE_ESS710               446
--#define MACH_TYPE_MX3ADS               447
-+#define MACH_TYPE_MX31ADS              447
- #define MACH_TYPE_HIMALAYA             448
- #define MACH_TYPE_BOLFENK              449
- #define MACH_TYPE_AT91RM9200KR         450
-@@ -736,7 +736,311 @@
- #define MACH_TYPE_LN2410SBC            725
- #define MACH_TYPE_CB3RUFC              726
- #define MACH_TYPE_MP2USB               727
--#define MACH_TYPE_PDNB3               1002
-+#define MACH_TYPE_NTNP425C             728
-+#define MACH_TYPE_COLIBRI              729
-+#define MACH_TYPE_PCM7220              730
-+#define MACH_TYPE_GATEWAY7001          731
-+#define MACH_TYPE_PCM027               732
-+#define MACH_TYPE_CMPXA                733
-+#define MACH_TYPE_ANUBIS               734
-+#define MACH_TYPE_ITE8152              735
-+#define MACH_TYPE_LPC3XXX              736
-+#define MACH_TYPE_PUPPETEER            737
-+#define MACH_TYPE_MACH_VADATECH        738
-+#define MACH_TYPE_E570                 739
-+#define MACH_TYPE_X50                  740
-+#define MACH_TYPE_RECON                741
-+#define MACH_TYPE_XBOARDGP8            742
-+#define MACH_TYPE_FPIC2                743
-+#define MACH_TYPE_AKITA                744
-+#define MACH_TYPE_A81                  745
-+#define MACH_TYPE_SVM_SC25X            746
-+#define MACH_TYPE_VADATECH020          747
-+#define MACH_TYPE_TLI                  748
-+#define MACH_TYPE_EDB9315LC            749
-+#define MACH_TYPE_PASSEC               750
-+#define MACH_TYPE_DS_TIGER             751
-+#define MACH_TYPE_E310                 752
-+#define MACH_TYPE_E330                 753
-+#define MACH_TYPE_RT3000               754
-+#define MACH_TYPE_NOKIA770             755
-+#define MACH_TYPE_PNX0106              756
-+#define MACH_TYPE_HX21XX               757
-+#define MACH_TYPE_FARADAY              758
-+#define MACH_TYPE_SBC9312              759
-+#define MACH_TYPE_BATMAN               760
-+#define MACH_TYPE_JPD201               761
-+#define MACH_TYPE_MIPSA                762
-+#define MACH_TYPE_KACOM                763
-+#define MACH_TYPE_SWARCOCPU            764
-+#define MACH_TYPE_SWARCODSL            765
-+#define MACH_TYPE_BLUEANGEL            766
-+#define MACH_TYPE_HAIRYGRAMA           767
-+#define MACH_TYPE_BANFF                768
-+#define MACH_TYPE_CARMEVA              769
-+#define MACH_TYPE_SAM255               770
-+#define MACH_TYPE_PPM10                771
-+#define MACH_TYPE_EDB9315A             772
-+#define MACH_TYPE_SUNSET               773
-+#define MACH_TYPE_STARGATE2            774
-+#define MACH_TYPE_INTELMOTE2           775
-+#define MACH_TYPE_TRIZEPS4             776
-+#define MACH_TYPE_MAINSTONE2           777
-+#define MACH_TYPE_EZ_IXP42X            778
-+#define MACH_TYPE_TAPWAVE_ZODIAC       779
-+#define MACH_TYPE_UNIVERSALMETER       780
-+#define MACH_TYPE_HICOARM9             781
-+#define MACH_TYPE_PNX4008              782
-+#define MACH_TYPE_KWS6000              783
-+#define MACH_TYPE_PORTUX920T           784
-+#define MACH_TYPE_EZ_X5                785
-+#define MACH_TYPE_OMAP_RUDOLPH         786
-+#define MACH_TYPE_CPUAT91              787
-+#define MACH_TYPE_REA9200              788
-+#define MACH_TYPE_ACTS_PUNE_SA1110     789
-+#define MACH_TYPE_IXP425               790
-+#define MACH_TYPE_ARGONPLUSODYSSEY     791
-+#define MACH_TYPE_PERCH                792
-+#define MACH_TYPE_EIS05R1              793
-+#define MACH_TYPE_PEPPERPAD            794
-+#define MACH_TYPE_SB3010               795
-+#define MACH_TYPE_RM9200               796
-+#define MACH_TYPE_DMA03                797
-+#define MACH_TYPE_ROAD_S101            798
-+#define MACH_TYPE_IQ_NEXTGEN_A         799
-+#define MACH_TYPE_IQ_NEXTGEN_B         800
-+#define MACH_TYPE_IQ_NEXTGEN_C         801
-+#define MACH_TYPE_IQ_NEXTGEN_D         802
-+#define MACH_TYPE_IQ_NEXTGEN_E         803
-+#define MACH_TYPE_MALLOW_AT91          804
-+#define MACH_TYPE_CYBERTRACKER_I       805
-+#define MACH_TYPE_GESBC931X            806
-+#define MACH_TYPE_CENTIPAD             807
-+#define MACH_TYPE_ARMSOC               808
-+#define MACH_TYPE_SE4200               809
-+#define MACH_TYPE_EMS197A              810
-+#define MACH_TYPE_MICRO9               811
-+#define MACH_TYPE_MICRO9L              812
-+#define MACH_TYPE_UC5471DSP            813
-+#define MACH_TYPE_SJ5471ENG            814
-+#define MACH_TYPE_CMPXA26X             815
-+#define MACH_TYPE_NC                   816
-+#define MACH_TYPE_OMAP_PALMTE          817
-+#define MACH_TYPE_AJAX52X              818
-+#define MACH_TYPE_SIRIUSTAR            819
-+#define MACH_TYPE_IODATA_HDLG          820
-+#define MACH_TYPE_AT91RM9200UTL        821
-+#define MACH_TYPE_BIOSAFE              822
-+#define MACH_TYPE_MP1000               823
-+#define MACH_TYPE_PARSY                824
-+#define MACH_TYPE_CCXP                 825
-+#define MACH_TYPE_OMAP_GSAMPLE         826
-+#define MACH_TYPE_REALVIEW_EB          827
-+#define MACH_TYPE_SAMOA                828
-+#define MACH_TYPE_T3XSCALE             829
-+#define MACH_TYPE_I878                 830
-+#define MACH_TYPE_BORZOI               831
-+#define MACH_TYPE_GECKO                832
-+#define MACH_TYPE_DS101                833
-+#define MACH_TYPE_OMAP_PALMTT2         834
-+#define MACH_TYPE_XSCALE_PALMLD        835
-+#define MACH_TYPE_CC9C                 836
-+#define MACH_TYPE_SBC1670              837
-+#define MACH_TYPE_IXDP28X5             838
-+#define MACH_TYPE_OMAP_PALMTT          839
-+#define MACH_TYPE_ML696K               840
-+#define MACH_TYPE_ARCOM_ZEUS           841
-+#define MACH_TYPE_OSIRIS               842
-+#define MACH_TYPE_MAESTRO              843
-+#define MACH_TYPE_TUNGE2               844
-+#define MACH_TYPE_IXBBM                845
-+#define MACH_TYPE_MX27                 846
-+#define MACH_TYPE_AX8004               847
-+#define MACH_TYPE_AT91SAM9261EK        848
-+#define MACH_TYPE_LOFT                 849
-+#define MACH_TYPE_MAGPIE               850
-+#define MACH_TYPE_MX21                 851
-+#define MACH_TYPE_MB87M3400            852
-+#define MACH_TYPE_MGUARD_DELTA         853
-+#define MACH_TYPE_DAVINCI_DVDP         854
-+#define MACH_TYPE_HTCUNIVERSAL         855
-+#define MACH_TYPE_TPAD                 856
-+#define MACH_TYPE_ROVERP3              857
-+#define MACH_TYPE_JORNADA928           858
-+#define MACH_TYPE_MV88FXX81            859
-+#define MACH_TYPE_STMP36XX             860
-+#define MACH_TYPE_SXNI79524            861
-+#define MACH_TYPE_AMS_DELTA            862
-+#define MACH_TYPE_URANIUM              863
-+#define MACH_TYPE_UCON                 864
-+#define MACH_TYPE_NAS100D              865
-+#define MACH_TYPE_L083_1000            866
-+#define MACH_TYPE_EZX                  867
-+#define MACH_TYPE_PNX5220              868
-+#define MACH_TYPE_BUTTE                869
-+#define MACH_TYPE_SRM2                 870
-+#define MACH_TYPE_DSBR                 871
-+#define MACH_TYPE_CRYSTALBALL          872
-+#define MACH_TYPE_TINYPXA27X           873
-+#define MACH_TYPE_HERBIE               874
-+#define MACH_TYPE_MAGICIAN             875
-+#define MACH_TYPE_CM4002               876
-+#define MACH_TYPE_B4                   877
-+#define MACH_TYPE_MAUI                 878
-+#define MACH_TYPE_CYBERTRACKER_G       879
-+#define MACH_TYPE_NXDKN                880
-+#define MACH_TYPE_MIO8390              881
-+#define MACH_TYPE_OMI_BOARD            882
-+#define MACH_TYPE_MX21CIV              883
-+#define MACH_TYPE_MAHI_CDAC            884
-+#define MACH_TYPE_XSCALE_PALMTX        885
-+#define MACH_TYPE_S3C2413              887
-+#define MACH_TYPE_SAMSYS_EP0           888
-+#define MACH_TYPE_WG302V1              889
-+#define MACH_TYPE_WG302V2              890
-+#define MACH_TYPE_EB42X                891
-+#define MACH_TYPE_IQ331ES              892
-+#define MACH_TYPE_COSYDSP              893
-+#define MACH_TYPE_UPLAT7D              894
-+#define MACH_TYPE_PTDAVINCI            895
-+#define MACH_TYPE_MBUS                 896
-+#define MACH_TYPE_NADIA2VB             897
-+#define MACH_TYPE_R1000                898
-+#define MACH_TYPE_HW90250              899
-+#define MACH_TYPE_OMAP_2430SDP         900
-+#define MACH_TYPE_DAVINCI_EVM          901
-+#define MACH_TYPE_OMAP_TORNADO         902
-+#define MACH_TYPE_OLOCREEK             903
-+#define MACH_TYPE_PALMZ72              904
-+#define MACH_TYPE_NXDB500              905
-+#define MACH_TYPE_APF9328              906
-+#define MACH_TYPE_OMAP_WIPOQ           907
-+#define MACH_TYPE_OMAP_TWIP            908
-+#define MACH_TYPE_XSCALE_PALMTREO650   909
-+#define MACH_TYPE_ACUMEN               910
-+#define MACH_TYPE_XP100                911
-+#define MACH_TYPE_FS2410               912
-+#define MACH_TYPE_PXA270_CERF          913
-+#define MACH_TYPE_SQ2FTLPALM           914
-+#define MACH_TYPE_BSEMSERVER           915
-+#define MACH_TYPE_NETCLIENT            916
-+#define MACH_TYPE_XSCALE_PALMTT5       917
-+#define MACH_TYPE_OMAP_PALMTC          918
-+#define MACH_TYPE_OMAP_APOLLON         919
-+#define MACH_TYPE_ARGONLVEVB           920
-+#define MACH_TYPE_REA_2D               921
-+#define MACH_TYPE_TI3E524              922
-+#define MACH_TYPE_ATEB9200             923
-+#define MACH_TYPE_AUCKLAND             924
-+#define MACH_TYPE_AK3320M              925
-+#define MACH_TYPE_DURAMAX              926
-+#define MACH_TYPE_N35                  927
-+#define MACH_TYPE_PRONGHORN            928
-+#define MACH_TYPE_FUNDY                929
-+#define MACH_TYPE_LOGICPD_PXA270       930
-+#define MACH_TYPE_CPU777               931
-+#define MACH_TYPE_SIMICON9201          932
-+#define MACH_TYPE_LEAP2_HPM            933
-+#define MACH_TYPE_CM922TXA10           934
-+#define MACH_TYPE_PXA                  935
-+#define MACH_TYPE_SANDGATE2            936
-+#define MACH_TYPE_SANDGATE2G           937
-+#define MACH_TYPE_SANDGATE2P           938
-+#define MACH_TYPE_FRED_JACK            939
-+#define MACH_TYPE_TTG_COLOR1           940
-+#define MACH_TYPE_NXEB500HMI           941
-+#define MACH_TYPE_NETDCU8              942
-+#define MACH_TYPE_ML675050_CPU_BOA     943
-+#define MACH_TYPE_NG_FVX538            944
-+#define MACH_TYPE_NG_FVS338            945
-+#define MACH_TYPE_PNX4103              946
-+#define MACH_TYPE_HESDB                947
-+#define MACH_TYPE_XSILO                948
-+#define MACH_TYPE_ESPRESSO             949
-+#define MACH_TYPE_EMLC                 950
-+#define MACH_TYPE_SISTERON             951
-+#define MACH_TYPE_RX1950               952
-+#define MACH_TYPE_TSC_VENUS            953
-+#define MACH_TYPE_DS101J               954
-+#define MACH_TYPE_MXC30030ADS          955
-+#define MACH_TYPE_FUJITSU_WIMAXSOC     956
-+#define MACH_TYPE_DUALPCMODEM          957
-+#define MACH_TYPE_GESBC9312            958
-+#define MACH_TYPE_HTCAPACHE            959
-+#define MACH_TYPE_IXDP435              960
-+#define MACH_TYPE_CATPROVT100          961
-+#define MACH_TYPE_PICOTUX1XX           962
-+#define MACH_TYPE_PICOTUX2XX           963
-+#define MACH_TYPE_DSMG600              964
-+#define MACH_TYPE_EMPC2                965
-+#define MACH_TYPE_VENTURA              966
-+#define MACH_TYPE_PHIDGET_SBC          967
-+#define MACH_TYPE_IJ3K                 968
-+#define MACH_TYPE_PISGAH               969
-+#define MACH_TYPE_OMAP_FSAMPLE         970
-+#define MACH_TYPE_SG720                971
-+#define MACH_TYPE_REDFOX               972
-+#define MACH_TYPE_MYSH_EP9315_1        973
-+#define MACH_TYPE_TPF106               974
-+#define MACH_TYPE_AT91RM9200KG         975
-+#define MACH_TYPE_SLEDB                976
-+#define MACH_TYPE_ONTRACK              977
-+#define MACH_TYPE_PM1200               978
-+#define MACH_TYPE_ESS24XXX             979
-+#define MACH_TYPE_COREMP7              980
-+#define MACH_TYPE_NEXCODER_6446        981
-+#define MACH_TYPE_STVC8380             982
-+#define MACH_TYPE_TEKLYNX              983
-+#define MACH_TYPE_CARBONADO            984
-+#define MACH_TYPE_SYSMOS_MP730         985
-+#define MACH_TYPE_SNAPPER_CL15         986
-+#define MACH_TYPE_PGIGIM               987
-+#define MACH_TYPE_PTX9160P2            988
-+#define MACH_TYPE_DCORE1               989
-+#define MACH_TYPE_VICTORPXA            990
-+#define MACH_TYPE_MX2DTB               991
-+#define MACH_TYPE_PXA_IREX_ER0100      992
-+#define MACH_TYPE_OMAP_PALMZ71         993
-+#define MACH_TYPE_BARTEC_DEG           994
-+#define MACH_TYPE_HW50251              995
-+#define MACH_TYPE_IBOX                 996
-+#define MACH_TYPE_ATLASLH7A404         997
-+#define MACH_TYPE_PT2026               998
-+#define MACH_TYPE_HTCALPINE            999
-+#define MACH_TYPE_BARTEC_VTU           1000
-+#define MACH_TYPE_VCOREII              1001
-+#define MACH_TYPE_PDNB3                1002
-+#define MACH_TYPE_HTCBEETLES           1003
-+#define MACH_TYPE_S3C6400              1004
-+#define MACH_TYPE_S3C2443              1005
-+#define MACH_TYPE_OMAP_LDK             1006
-+#define MACH_TYPE_SMDK2460             1007
-+#define MACH_TYPE_SMDK2440             1008
-+#define MACH_TYPE_SMDK2412             1009
-+#define MACH_TYPE_WEBBOX               1010
-+#define MACH_TYPE_CWWNDP               1011
-+#define MACH_TYPE_DRAGON               1012
-+#define MACH_TYPE_OPENDO_CPU_BOARD     1013
-+#define MACH_TYPE_CCM2200              1014
-+#define MACH_TYPE_ETWARM               1015
-+#define MACH_TYPE_M93030               1016
-+#define MACH_TYPE_CC7U                 1017
-+#define MACH_TYPE_MTT_RANGER           1018
-+#define MACH_TYPE_NEXUS                1019
-+#define MACH_TYPE_DESMAN               1020
-+#define MACH_TYPE_BKDE303              1021
-+#define MACH_TYPE_SMDK2413             1022
-+#define MACH_TYPE_AML_M7200            1023
-+#define MACH_TYPE_AML_M5900            1024
-+#define MACH_TYPE_SG640                1025
-+#define MACH_TYPE_EDG79524             1026
-+#define MACH_TYPE_AI2410               1027
-+#define MACH_TYPE_IXP465               1028
-+#define MACH_TYPE_BALLOON3             1029
-+#define MACH_TYPE_QT2410               1108
-+#define MACH_TYPE_NEO1973_GTA01        1182
-+#define MACH_TYPE_HXD8                 1303
-+#define MACH_TYPE_NEO1973_GTA02        1304
- 
- #ifdef CONFIG_ARCH_EBSA110
- # ifdef machine_arch_type
-@@ -3541,9 +3845,9 @@
- # else
- #  define machine_arch_type	MACH_TYPE_RAMSES
- # endif
--# define machine_is_ramses()	(machine_arch_type == MACH_TYPE_RAMSES)
-+# define machine_is_mnci()	(machine_arch_type == MACH_TYPE_RAMSES)
- #else
--# define machine_is_ramses()	(0)
-+# define machine_is_mnci()	(0)
- #endif
- 
- #ifdef CONFIG_ARCH_S28X
-@@ -4501,9 +4805,9 @@
- # else
- #  define machine_arch_type	MACH_TYPE_M825XX
- # endif
--# define machine_is_m825xx()	(machine_arch_type == MACH_TYPE_M825XX)
-+# define machine_is_comcerto()	(machine_arch_type == MACH_TYPE_M825XX)
- #else
--# define machine_is_m825xx()	(0)
-+# define machine_is_comcerto()	(0)
- #endif
- 
- #ifdef CONFIG_SA1100_M7100
-@@ -5658,16 +5962,16 @@
- # define machine_is_xcep()	(0)
- #endif
- 
--#ifdef CONFIG_MACH_ARCOM_MERCURY
-+#ifdef CONFIG_MACH_ARCOM_VULCAN
- # ifdef machine_arch_type
- #  undef machine_arch_type
- #  define machine_arch_type	__machine_arch_type
- # else
--#  define machine_arch_type	MACH_TYPE_ARCOM_MERCURY
-+#  define machine_arch_type	MACH_TYPE_ARCOM_VULCAN
- # endif
--# define machine_is_arcom_mercury()	(machine_arch_type == MACH_TYPE_ARCOM_MERCURY)
-+# define machine_is_arcom_vulcan()	(machine_arch_type == MACH_TYPE_ARCOM_VULCAN)
- #else
--# define machine_is_arcom_mercury()	(0)
-+# define machine_is_arcom_vulcan()	(0)
- #endif
- 
- #ifdef CONFIG_MACH_STARGATE
-@@ -6054,16 +6358,16 @@
- # define machine_is_ess710()	(0)
- #endif
- 
--#ifdef CONFIG_MACH_MX3ADS
-+#ifdef CONFIG_MACH_MX31ADS
- # ifdef machine_arch_type
- #  undef machine_arch_type
- #  define machine_arch_type	__machine_arch_type
- # else
--#  define machine_arch_type	MACH_TYPE_MX3ADS
-+#  define machine_arch_type	MACH_TYPE_MX31ADS
- # endif
--# define machine_is_mx3ads()	(machine_arch_type == MACH_TYPE_MX3ADS)
-+# define machine_is_mx31ads()	(machine_arch_type == MACH_TYPE_MX31ADS)
- #else
--# define machine_is_mx3ads()	(0)
-+# define machine_is_mx31ads()	(0)
- #endif
- 
- #ifdef CONFIG_MACH_HIMALAYA
-@@ -7333,9 +7637,9 @@
- # else
- #  define machine_arch_type	MACH_TYPE_ARGONPLUSEVB
- # endif
--# define machine_is_argonplusevb()	(machine_arch_type == MACH_TYPE_ARGONPLUSEVB)
-+# define machine_is_i30030evb()	(machine_arch_type == MACH_TYPE_ARGONPLUSEVB)
- #else
--# define machine_is_argonplusevb()	(0)
-+# define machine_is_i30030evb()	(0)
- #endif
- 
- #ifdef CONFIG_MACH_SCMA11EVB
-@@ -7345,9 +7649,9 @@
- # else
- #  define machine_arch_type	MACH_TYPE_SCMA11EVB
- # endif
--# define machine_is_scma11evb()	(machine_arch_type == MACH_TYPE_SCMA11EVB)
-+# define machine_is_mxc27530evb()	(machine_arch_type == MACH_TYPE_SCMA11EVB)
- #else
--# define machine_is_scma11evb()	(0)
-+# define machine_is_mxc27530evb()	(0)
- #endif
- 
- #ifdef CONFIG_MACH_SMDK2800
-@@ -8305,9 +8609,9 @@
- # else
- #  define machine_arch_type	MACH_TYPE_SCMA11BB
- # endif
--# define machine_is_scma11bb()	(machine_arch_type == MACH_TYPE_SCMA11BB)
-+# define machine_is_mxc27530ads()	(machine_arch_type == MACH_TYPE_SCMA11BB)
- #else
--# define machine_is_scma11bb()	(0)
-+# define machine_is_mxc27530ads()	(0)
- #endif
- 
- #ifdef CONFIG_MACH_TRIZEPS3
-@@ -9193,9 +9497,9 @@
- # else
- #  define machine_arch_type	MACH_TYPE_ZEUSEVB
- # endif
--# define machine_is_zeusevb()	(machine_arch_type == MACH_TYPE_ZEUSEVB)
-+# define machine_is_mxc91131evb()	(machine_arch_type == MACH_TYPE_ZEUSEVB)
- #else
--# define machine_is_zeusevb()	(0)
-+# define machine_is_mxc91131evb()	(0)
- #endif
- 
- #ifdef CONFIG_MACH_P700
-@@ -9402,6 +9706,3667 @@
- # define machine_is_mp2usb()	(0)
- #endif
- 
-+#ifdef CONFIG_MACH_NTNP425C
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NTNP425C
-+# endif
-+# define machine_is_ntnp425c()	(machine_arch_type == MACH_TYPE_NTNP425C)
-+#else
-+# define machine_is_ntnp425c()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COLIBRI
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_COLIBRI
-+# endif
-+# define machine_is_colibri()	(machine_arch_type == MACH_TYPE_COLIBRI)
-+#else
-+# define machine_is_colibri()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PCM7220
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PCM7220
-+# endif
-+# define machine_is_pcm7220()	(machine_arch_type == MACH_TYPE_PCM7220)
-+#else
-+# define machine_is_pcm7220()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GATEWAY7001
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_GATEWAY7001
-+# endif
-+# define machine_is_gateway7001()	(machine_arch_type == MACH_TYPE_GATEWAY7001)
-+#else
-+# define machine_is_gateway7001()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PCM027
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PCM027
-+# endif
-+# define machine_is_pcm027()	(machine_arch_type == MACH_TYPE_PCM027)
-+#else
-+# define machine_is_pcm027()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CMPXA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CMPXA
-+# endif
-+# define machine_is_cmpxa()	(machine_arch_type == MACH_TYPE_CMPXA)
-+#else
-+# define machine_is_cmpxa()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ANUBIS
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ANUBIS
-+# endif
-+# define machine_is_anubis()	(machine_arch_type == MACH_TYPE_ANUBIS)
-+#else
-+# define machine_is_anubis()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ITE8152
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ITE8152
-+# endif
-+# define machine_is_ite8152()	(machine_arch_type == MACH_TYPE_ITE8152)
-+#else
-+# define machine_is_ite8152()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LPC3XXX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_LPC3XXX
-+# endif
-+# define machine_is_lpc3xxx()	(machine_arch_type == MACH_TYPE_LPC3XXX)
-+#else
-+# define machine_is_lpc3xxx()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PUPPETEER
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PUPPETEER
-+# endif
-+# define machine_is_puppeteer()	(machine_arch_type == MACH_TYPE_PUPPETEER)
-+#else
-+# define machine_is_puppeteer()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MACH_VADATECH
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MACH_VADATECH
-+# endif
-+# define machine_is_vt001()	(machine_arch_type == MACH_TYPE_MACH_VADATECH)
-+#else
-+# define machine_is_vt001()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E570
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_E570
-+# endif
-+# define machine_is_e570()	(machine_arch_type == MACH_TYPE_E570)
-+#else
-+# define machine_is_e570()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_X50
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_X50
-+# endif
-+# define machine_is_x50()	(machine_arch_type == MACH_TYPE_X50)
-+#else
-+# define machine_is_x50()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RECON
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_RECON
-+# endif
-+# define machine_is_recon()	(machine_arch_type == MACH_TYPE_RECON)
-+#else
-+# define machine_is_recon()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XBOARDGP8
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_XBOARDGP8
-+# endif
-+# define machine_is_xboardgp8()	(machine_arch_type == MACH_TYPE_XBOARDGP8)
-+#else
-+# define machine_is_xboardgp8()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FPIC2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_FPIC2
-+# endif
-+# define machine_is_fpic2()	(machine_arch_type == MACH_TYPE_FPIC2)
-+#else
-+# define machine_is_fpic2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AKITA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AKITA
-+# endif
-+# define machine_is_akita()	(machine_arch_type == MACH_TYPE_AKITA)
-+#else
-+# define machine_is_akita()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_A81
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_A81
-+# endif
-+# define machine_is_a81()	(machine_arch_type == MACH_TYPE_A81)
-+#else
-+# define machine_is_a81()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SVM_SC25X
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SVM_SC25X
-+# endif
-+# define machine_is_svm_sc25x()	(machine_arch_type == MACH_TYPE_SVM_SC25X)
-+#else
-+# define machine_is_svm_sc25x()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VADATECH020
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_VADATECH020
-+# endif
-+# define machine_is_vt020()	(machine_arch_type == MACH_TYPE_VADATECH020)
-+#else
-+# define machine_is_vt020()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TLI
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TLI
-+# endif
-+# define machine_is_tli()	(machine_arch_type == MACH_TYPE_TLI)
-+#else
-+# define machine_is_tli()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDB9315LC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EDB9315LC
-+# endif
-+# define machine_is_edb9315lc()	(machine_arch_type == MACH_TYPE_EDB9315LC)
-+#else
-+# define machine_is_edb9315lc()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PASSEC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PASSEC
-+# endif
-+# define machine_is_passec()	(machine_arch_type == MACH_TYPE_PASSEC)
-+#else
-+# define machine_is_passec()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS_TIGER
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DS_TIGER
-+# endif
-+# define machine_is_ds_tiger()	(machine_arch_type == MACH_TYPE_DS_TIGER)
-+#else
-+# define machine_is_ds_tiger()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E310
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_E310
-+# endif
-+# define machine_is_e310()	(machine_arch_type == MACH_TYPE_E310)
-+#else
-+# define machine_is_e310()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E330
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_E330
-+# endif
-+# define machine_is_e330()	(machine_arch_type == MACH_TYPE_E330)
-+#else
-+# define machine_is_e330()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RT3000
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_RT3000
-+# endif
-+# define machine_is_rt3000()	(machine_arch_type == MACH_TYPE_RT3000)
-+#else
-+# define machine_is_rt3000()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NOKIA770
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NOKIA770
-+# endif
-+# define machine_is_nokia770()	(machine_arch_type == MACH_TYPE_NOKIA770)
-+#else
-+# define machine_is_nokia770()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX0106
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PNX0106
-+# endif
-+# define machine_is_pnx0106()	(machine_arch_type == MACH_TYPE_PNX0106)
-+#else
-+# define machine_is_pnx0106()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HX21XX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HX21XX
-+# endif
-+# define machine_is_hx21xx()	(machine_arch_type == MACH_TYPE_HX21XX)
-+#else
-+# define machine_is_hx21xx()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FARADAY
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_FARADAY
-+# endif
-+# define machine_is_faraday()	(machine_arch_type == MACH_TYPE_FARADAY)
-+#else
-+# define machine_is_faraday()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SBC9312
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SBC9312
-+# endif
-+# define machine_is_sbc9312()	(machine_arch_type == MACH_TYPE_SBC9312)
-+#else
-+# define machine_is_sbc9312()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BATMAN
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BATMAN
-+# endif
-+# define machine_is_batman()	(machine_arch_type == MACH_TYPE_BATMAN)
-+#else
-+# define machine_is_batman()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_JPD201
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_JPD201
-+# endif
-+# define machine_is_jpd201()	(machine_arch_type == MACH_TYPE_JPD201)
-+#else
-+# define machine_is_jpd201()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MIPSA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MIPSA
-+# endif
-+# define machine_is_mipsa()	(machine_arch_type == MACH_TYPE_MIPSA)
-+#else
-+# define machine_is_mipsa()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_KACOM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_KACOM
-+# endif
-+# define machine_is_kacom()	(machine_arch_type == MACH_TYPE_KACOM)
-+#else
-+# define machine_is_kacom()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SWARCOCPU
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SWARCOCPU
-+# endif
-+# define machine_is_swarcocpu()	(machine_arch_type == MACH_TYPE_SWARCOCPU)
-+#else
-+# define machine_is_swarcocpu()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SWARCODSL
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SWARCODSL
-+# endif
-+# define machine_is_swarcodsl()	(machine_arch_type == MACH_TYPE_SWARCODSL)
-+#else
-+# define machine_is_swarcodsl()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BLUEANGEL
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BLUEANGEL
-+# endif
-+# define machine_is_blueangel()	(machine_arch_type == MACH_TYPE_BLUEANGEL)
-+#else
-+# define machine_is_blueangel()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HAIRYGRAMA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HAIRYGRAMA
-+# endif
-+# define machine_is_hairygrama()	(machine_arch_type == MACH_TYPE_HAIRYGRAMA)
-+#else
-+# define machine_is_hairygrama()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BANFF
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BANFF
-+# endif
-+# define machine_is_banff()	(machine_arch_type == MACH_TYPE_BANFF)
-+#else
-+# define machine_is_banff()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CARMEVA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CARMEVA
-+# endif
-+# define machine_is_carmeva()	(machine_arch_type == MACH_TYPE_CARMEVA)
-+#else
-+# define machine_is_carmeva()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAM255
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SAM255
-+# endif
-+# define machine_is_sam255()	(machine_arch_type == MACH_TYPE_SAM255)
-+#else
-+# define machine_is_sam255()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PPM10
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PPM10
-+# endif
-+# define machine_is_ppm10()	(machine_arch_type == MACH_TYPE_PPM10)
-+#else
-+# define machine_is_ppm10()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDB9315A
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EDB9315A
-+# endif
-+# define machine_is_edb9315a()	(machine_arch_type == MACH_TYPE_EDB9315A)
-+#else
-+# define machine_is_edb9315a()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SUNSET
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SUNSET
-+# endif
-+# define machine_is_sunset()	(machine_arch_type == MACH_TYPE_SUNSET)
-+#else
-+# define machine_is_sunset()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STARGATE2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_STARGATE2
-+# endif
-+# define machine_is_stargate2()	(machine_arch_type == MACH_TYPE_STARGATE2)
-+#else
-+# define machine_is_stargate2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_INTELMOTE2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_INTELMOTE2
-+# endif
-+# define machine_is_intelmote2()	(machine_arch_type == MACH_TYPE_INTELMOTE2)
-+#else
-+# define machine_is_intelmote2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TRIZEPS4
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TRIZEPS4
-+# endif
-+# define machine_is_trizeps4()	(machine_arch_type == MACH_TYPE_TRIZEPS4)
-+#else
-+# define machine_is_trizeps4()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAINSTONE2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MAINSTONE2
-+# endif
-+# define machine_is_mainstone2()	(machine_arch_type == MACH_TYPE_MAINSTONE2)
-+#else
-+# define machine_is_mainstone2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZ_IXP42X
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EZ_IXP42X
-+# endif
-+# define machine_is_ez_ixp42x()	(machine_arch_type == MACH_TYPE_EZ_IXP42X)
-+#else
-+# define machine_is_ez_ixp42x()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TAPWAVE_ZODIAC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TAPWAVE_ZODIAC
-+# endif
-+# define machine_is_tapwave_zodiac()	(machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC)
-+#else
-+# define machine_is_tapwave_zodiac()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UNIVERSALMETER
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_UNIVERSALMETER
-+# endif
-+# define machine_is_universalmeter()	(machine_arch_type == MACH_TYPE_UNIVERSALMETER)
-+#else
-+# define machine_is_universalmeter()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HICOARM9
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HICOARM9
-+# endif
-+# define machine_is_hicoarm9()	(machine_arch_type == MACH_TYPE_HICOARM9)
-+#else
-+# define machine_is_hicoarm9()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX4008
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PNX4008
-+# endif
-+# define machine_is_pnx4008()	(machine_arch_type == MACH_TYPE_PNX4008)
-+#else
-+# define machine_is_pnx4008()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_KWS6000
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_KWS6000
-+# endif
-+# define machine_is_kws6000()	(machine_arch_type == MACH_TYPE_KWS6000)
-+#else
-+# define machine_is_kws6000()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PORTUX920T
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PORTUX920T
-+# endif
-+# define machine_is_portux920t()	(machine_arch_type == MACH_TYPE_PORTUX920T)
-+#else
-+# define machine_is_portux920t()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZ_X5
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EZ_X5
-+# endif
-+# define machine_is_ez_x5()	(machine_arch_type == MACH_TYPE_EZ_X5)
-+#else
-+# define machine_is_ez_x5()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_RUDOLPH
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_RUDOLPH
-+# endif
-+# define machine_is_omap_rudolph()	(machine_arch_type == MACH_TYPE_OMAP_RUDOLPH)
-+#else
-+# define machine_is_omap_rudolph()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CPUAT91
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CPUAT91
-+# endif
-+# define machine_is_cpuat91()	(machine_arch_type == MACH_TYPE_CPUAT91)
-+#else
-+# define machine_is_cpuat91()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REA9200
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_REA9200
-+# endif
-+# define machine_is_rea9200()	(machine_arch_type == MACH_TYPE_REA9200)
-+#else
-+# define machine_is_rea9200()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ACTS_PUNE_SA1110
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ACTS_PUNE_SA1110
-+# endif
-+# define machine_is_acts_pune_sa1110()	(machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110)
-+#else
-+# define machine_is_acts_pune_sa1110()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXP425
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IXP425
-+# endif
-+# define machine_is_ixp425()	(machine_arch_type == MACH_TYPE_IXP425)
-+#else
-+# define machine_is_ixp425()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARGONPLUSODYSSEY
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ARGONPLUSODYSSEY
-+# endif
-+# define machine_is_i30030ads()	(machine_arch_type == MACH_TYPE_ARGONPLUSODYSSEY)
-+#else
-+# define machine_is_i30030ads()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PERCH
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PERCH
-+# endif
-+# define machine_is_perch()	(machine_arch_type == MACH_TYPE_PERCH)
-+#else
-+# define machine_is_perch()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EIS05R1
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EIS05R1
-+# endif
-+# define machine_is_eis05r1()	(machine_arch_type == MACH_TYPE_EIS05R1)
-+#else
-+# define machine_is_eis05r1()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PEPPERPAD
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PEPPERPAD
-+# endif
-+# define machine_is_pepperpad()	(machine_arch_type == MACH_TYPE_PEPPERPAD)
-+#else
-+# define machine_is_pepperpad()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SB3010
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SB3010
-+# endif
-+# define machine_is_sb3010()	(machine_arch_type == MACH_TYPE_SB3010)
-+#else
-+# define machine_is_sb3010()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RM9200
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_RM9200
-+# endif
-+# define machine_is_rm9200()	(machine_arch_type == MACH_TYPE_RM9200)
-+#else
-+# define machine_is_rm9200()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DMA03
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DMA03
-+# endif
-+# define machine_is_dma03()	(machine_arch_type == MACH_TYPE_DMA03)
-+#else
-+# define machine_is_dma03()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ROAD_S101
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ROAD_S101
-+# endif
-+# define machine_is_road_s101()	(machine_arch_type == MACH_TYPE_ROAD_S101)
-+#else
-+# define machine_is_road_s101()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_A
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_A
-+# endif
-+# define machine_is_iq_nextgen_a()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A)
-+#else
-+# define machine_is_iq_nextgen_a()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_B
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_B
-+# endif
-+# define machine_is_iq_nextgen_b()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B)
-+#else
-+# define machine_is_iq_nextgen_b()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_C
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_C
-+# endif
-+# define machine_is_iq_nextgen_c()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C)
-+#else
-+# define machine_is_iq_nextgen_c()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_D
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_D
-+# endif
-+# define machine_is_iq_nextgen_d()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D)
-+#else
-+# define machine_is_iq_nextgen_d()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_E
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_E
-+# endif
-+# define machine_is_iq_nextgen_e()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E)
-+#else
-+# define machine_is_iq_nextgen_e()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MALLOW_AT91
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MALLOW_AT91
-+# endif
-+# define machine_is_mallow_at91()	(machine_arch_type == MACH_TYPE_MALLOW_AT91)
-+#else
-+# define machine_is_mallow_at91()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CYBERTRACKER_I
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CYBERTRACKER_I
-+# endif
-+# define machine_is_cybertracker_i()	(machine_arch_type == MACH_TYPE_CYBERTRACKER_I)
-+#else
-+# define machine_is_cybertracker_i()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GESBC931X
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_GESBC931X
-+# endif
-+# define machine_is_gesbc931x()	(machine_arch_type == MACH_TYPE_GESBC931X)
-+#else
-+# define machine_is_gesbc931x()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CENTIPAD
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CENTIPAD
-+# endif
-+# define machine_is_centipad()	(machine_arch_type == MACH_TYPE_CENTIPAD)
-+#else
-+# define machine_is_centipad()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARMSOC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ARMSOC
-+# endif
-+# define machine_is_armsoc()	(machine_arch_type == MACH_TYPE_ARMSOC)
-+#else
-+# define machine_is_armsoc()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SE4200
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SE4200
-+# endif
-+# define machine_is_se4200()	(machine_arch_type == MACH_TYPE_SE4200)
-+#else
-+# define machine_is_se4200()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMS197A
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EMS197A
-+# endif
-+# define machine_is_ems197a()	(machine_arch_type == MACH_TYPE_EMS197A)
-+#else
-+# define machine_is_ems197a()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MICRO9
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MICRO9
-+# endif
-+# define machine_is_micro9()	(machine_arch_type == MACH_TYPE_MICRO9)
-+#else
-+# define machine_is_micro9()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MICRO9L
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MICRO9L
-+# endif
-+# define machine_is_micro9l()	(machine_arch_type == MACH_TYPE_MICRO9L)
-+#else
-+# define machine_is_micro9l()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UC5471DSP
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_UC5471DSP
-+# endif
-+# define machine_is_uc5471dsp()	(machine_arch_type == MACH_TYPE_UC5471DSP)
-+#else
-+# define machine_is_uc5471dsp()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SJ5471ENG
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SJ5471ENG
-+# endif
-+# define machine_is_sj5471eng()	(machine_arch_type == MACH_TYPE_SJ5471ENG)
-+#else
-+# define machine_is_sj5471eng()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CMPXA26X
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CMPXA26X
-+# endif
-+# define machine_is_none()	(machine_arch_type == MACH_TYPE_CMPXA26X)
-+#else
-+# define machine_is_none()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NC
-+# endif
-+# define machine_is_nc1()	(machine_arch_type == MACH_TYPE_NC)
-+#else
-+# define machine_is_nc1()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_PALMTE
-+# endif
-+# define machine_is_omap_palmte()	(machine_arch_type == MACH_TYPE_OMAP_PALMTE)
-+#else
-+# define machine_is_omap_palmte()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AJAX52X
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AJAX52X
-+# endif
-+# define machine_is_ajax52x()	(machine_arch_type == MACH_TYPE_AJAX52X)
-+#else
-+# define machine_is_ajax52x()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SIRIUSTAR
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SIRIUSTAR
-+# endif
-+# define machine_is_siriustar()	(machine_arch_type == MACH_TYPE_SIRIUSTAR)
-+#else
-+# define machine_is_siriustar()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IODATA_HDLG
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IODATA_HDLG
-+# endif
-+# define machine_is_iodata_hdlg()	(machine_arch_type == MACH_TYPE_IODATA_HDLG)
-+#else
-+# define machine_is_iodata_hdlg()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91RM9200UTL
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AT91RM9200UTL
-+# endif
-+# define machine_is_at91rm9200utl()	(machine_arch_type == MACH_TYPE_AT91RM9200UTL)
-+#else
-+# define machine_is_at91rm9200utl()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BIOSAFE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BIOSAFE
-+# endif
-+# define machine_is_biosafe()	(machine_arch_type == MACH_TYPE_BIOSAFE)
-+#else
-+# define machine_is_biosafe()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MP1000
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MP1000
-+# endif
-+# define machine_is_mp1000()	(machine_arch_type == MACH_TYPE_MP1000)
-+#else
-+# define machine_is_mp1000()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PARSY
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PARSY
-+# endif
-+# define machine_is_parsy()	(machine_arch_type == MACH_TYPE_PARSY)
-+#else
-+# define machine_is_parsy()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CCXP
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CCXP
-+# endif
-+# define machine_is_ccxp270()	(machine_arch_type == MACH_TYPE_CCXP)
-+#else
-+# define machine_is_ccxp270()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_GSAMPLE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_GSAMPLE
-+# endif
-+# define machine_is_omap_gsample()	(machine_arch_type == MACH_TYPE_OMAP_GSAMPLE)
-+#else
-+# define machine_is_omap_gsample()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REALVIEW_EB
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_REALVIEW_EB
-+# endif
-+# define machine_is_realview_eb()	(machine_arch_type == MACH_TYPE_REALVIEW_EB)
-+#else
-+# define machine_is_realview_eb()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAMOA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SAMOA
-+# endif
-+# define machine_is_samoa()	(machine_arch_type == MACH_TYPE_SAMOA)
-+#else
-+# define machine_is_samoa()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_T3XSCALE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_T3XSCALE
-+# endif
-+# define machine_is_t3xscale()	(machine_arch_type == MACH_TYPE_T3XSCALE)
-+#else
-+# define machine_is_t3xscale()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_I878
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_I878
-+# endif
-+# define machine_is_i878()	(machine_arch_type == MACH_TYPE_I878)
-+#else
-+# define machine_is_i878()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BORZOI
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BORZOI
-+# endif
-+# define machine_is_borzoi()	(machine_arch_type == MACH_TYPE_BORZOI)
-+#else
-+# define machine_is_borzoi()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GECKO
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_GECKO
-+# endif
-+# define machine_is_gecko()	(machine_arch_type == MACH_TYPE_GECKO)
-+#else
-+# define machine_is_gecko()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS101
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DS101
-+# endif
-+# define machine_is_ds101()	(machine_arch_type == MACH_TYPE_DS101)
-+#else
-+# define machine_is_ds101()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTT2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_PALMTT2
-+# endif
-+# define machine_is_omap_palmtt2()	(machine_arch_type == MACH_TYPE_OMAP_PALMTT2)
-+#else
-+# define machine_is_omap_palmtt2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMLD
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_XSCALE_PALMLD
-+# endif
-+# define machine_is_xscale_palmld()	(machine_arch_type == MACH_TYPE_XSCALE_PALMLD)
-+#else
-+# define machine_is_xscale_palmld()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CC9C
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CC9C
-+# endif
-+# define machine_is_cc9c()	(machine_arch_type == MACH_TYPE_CC9C)
-+#else
-+# define machine_is_cc9c()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SBC1670
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SBC1670
-+# endif
-+# define machine_is_sbc1670()	(machine_arch_type == MACH_TYPE_SBC1670)
-+#else
-+# define machine_is_sbc1670()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXDP28X5
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IXDP28X5
-+# endif
-+# define machine_is_ixdp28x5()	(machine_arch_type == MACH_TYPE_IXDP28X5)
-+#else
-+# define machine_is_ixdp28x5()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTT
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_PALMTT
-+# endif
-+# define machine_is_omap_palmtt()	(machine_arch_type == MACH_TYPE_OMAP_PALMTT)
-+#else
-+# define machine_is_omap_palmtt()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ML696K
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ML696K
-+# endif
-+# define machine_is_ml696k()	(machine_arch_type == MACH_TYPE_ML696K)
-+#else
-+# define machine_is_ml696k()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARCOM_ZEUS
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ARCOM_ZEUS
-+# endif
-+# define machine_is_arcom_zeus()	(machine_arch_type == MACH_TYPE_ARCOM_ZEUS)
-+#else
-+# define machine_is_arcom_zeus()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OSIRIS
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OSIRIS
-+# endif
-+# define machine_is_osiris()	(machine_arch_type == MACH_TYPE_OSIRIS)
-+#else
-+# define machine_is_osiris()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAESTRO
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MAESTRO
-+# endif
-+# define machine_is_maestro()	(machine_arch_type == MACH_TYPE_MAESTRO)
-+#else
-+# define machine_is_maestro()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TUNGE2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TUNGE2
-+# endif
-+# define machine_is_tunge2()	(machine_arch_type == MACH_TYPE_TUNGE2)
-+#else
-+# define machine_is_tunge2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXBBM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IXBBM
-+# endif
-+# define machine_is_ixbbm()	(machine_arch_type == MACH_TYPE_IXBBM)
-+#else
-+# define machine_is_ixbbm()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX27
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MX27
-+# endif
-+# define machine_is_mx27ads()	(machine_arch_type == MACH_TYPE_MX27)
-+#else
-+# define machine_is_mx27ads()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AX8004
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AX8004
-+# endif
-+# define machine_is_ax8004()	(machine_arch_type == MACH_TYPE_AX8004)
-+#else
-+# define machine_is_ax8004()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91SAM9261EK
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AT91SAM9261EK
-+# endif
-+# define machine_is_at91sam9261ek()	(machine_arch_type == MACH_TYPE_AT91SAM9261EK)
-+#else
-+# define machine_is_at91sam9261ek()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LOFT
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_LOFT
-+# endif
-+# define machine_is_loft()	(machine_arch_type == MACH_TYPE_LOFT)
-+#else
-+# define machine_is_loft()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAGPIE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MAGPIE
-+# endif
-+# define machine_is_magpie()	(machine_arch_type == MACH_TYPE_MAGPIE)
-+#else
-+# define machine_is_magpie()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX21
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MX21
-+# endif
-+# define machine_is_mx21ads()	(machine_arch_type == MACH_TYPE_MX21)
-+#else
-+# define machine_is_mx21ads()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MB87M3400
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MB87M3400
-+# endif
-+# define machine_is_mb87m3400()	(machine_arch_type == MACH_TYPE_MB87M3400)
-+#else
-+# define machine_is_mb87m3400()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MGUARD_DELTA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MGUARD_DELTA
-+# endif
-+# define machine_is_mguard_delta()	(machine_arch_type == MACH_TYPE_MGUARD_DELTA)
-+#else
-+# define machine_is_mguard_delta()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DAVINCI_DVDP
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DAVINCI_DVDP
-+# endif
-+# define machine_is_davinci_dvdp()	(machine_arch_type == MACH_TYPE_DAVINCI_DVDP)
-+#else
-+# define machine_is_davinci_dvdp()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCUNIVERSAL
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HTCUNIVERSAL
-+# endif
-+# define machine_is_htcuniversal()	(machine_arch_type == MACH_TYPE_HTCUNIVERSAL)
-+#else
-+# define machine_is_htcuniversal()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TPAD
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TPAD
-+# endif
-+# define machine_is_tpad()	(machine_arch_type == MACH_TYPE_TPAD)
-+#else
-+# define machine_is_tpad()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ROVERP3
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ROVERP3
-+# endif
-+# define machine_is_roverp3()	(machine_arch_type == MACH_TYPE_ROVERP3)
-+#else
-+# define machine_is_roverp3()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_JORNADA928
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_JORNADA928
-+# endif
-+# define machine_is_jornada928()	(machine_arch_type == MACH_TYPE_JORNADA928)
-+#else
-+# define machine_is_jornada928()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MV88FXX81
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MV88FXX81
-+# endif
-+# define machine_is_mv88fxx81()	(machine_arch_type == MACH_TYPE_MV88FXX81)
-+#else
-+# define machine_is_mv88fxx81()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STMP36XX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_STMP36XX
-+# endif
-+# define machine_is_stmp36xx()	(machine_arch_type == MACH_TYPE_STMP36XX)
-+#else
-+# define machine_is_stmp36xx()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SXNI79524
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SXNI79524
-+# endif
-+# define machine_is_sxni79524()	(machine_arch_type == MACH_TYPE_SXNI79524)
-+#else
-+# define machine_is_sxni79524()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AMS_DELTA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AMS_DELTA
-+# endif
-+# define machine_is_ams_delta()	(machine_arch_type == MACH_TYPE_AMS_DELTA)
-+#else
-+# define machine_is_ams_delta()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_URANIUM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_URANIUM
-+# endif
-+# define machine_is_uranium()	(machine_arch_type == MACH_TYPE_URANIUM)
-+#else
-+# define machine_is_uranium()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UCON
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_UCON
-+# endif
-+# define machine_is_ucon()	(machine_arch_type == MACH_TYPE_UCON)
-+#else
-+# define machine_is_ucon()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NAS100D
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NAS100D
-+# endif
-+# define machine_is_nas100d()	(machine_arch_type == MACH_TYPE_NAS100D)
-+#else
-+# define machine_is_nas100d()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_L083_1000
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_L083_1000
-+# endif
-+# define machine_is_l083()	(machine_arch_type == MACH_TYPE_L083_1000)
-+#else
-+# define machine_is_l083()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EZX
-+# endif
-+# define machine_is_ezx()	(machine_arch_type == MACH_TYPE_EZX)
-+#else
-+# define machine_is_ezx()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX5220
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PNX5220
-+# endif
-+# define machine_is_pnx5220()	(machine_arch_type == MACH_TYPE_PNX5220)
-+#else
-+# define machine_is_pnx5220()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BUTTE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BUTTE
-+# endif
-+# define machine_is_butte()	(machine_arch_type == MACH_TYPE_BUTTE)
-+#else
-+# define machine_is_butte()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SRM2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SRM2
-+# endif
-+# define machine_is_srm2()	(machine_arch_type == MACH_TYPE_SRM2)
-+#else
-+# define machine_is_srm2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DSBR
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DSBR
-+# endif
-+# define machine_is_dsbr()	(machine_arch_type == MACH_TYPE_DSBR)
-+#else
-+# define machine_is_dsbr()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CRYSTALBALL
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CRYSTALBALL
-+# endif
-+# define machine_is_crystalball()	(machine_arch_type == MACH_TYPE_CRYSTALBALL)
-+#else
-+# define machine_is_crystalball()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TINYPXA27X
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TINYPXA27X
-+# endif
-+# define machine_is_tinypxa27x()	(machine_arch_type == MACH_TYPE_TINYPXA27X)
-+#else
-+# define machine_is_tinypxa27x()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HERBIE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HERBIE
-+# endif
-+# define machine_is_herbie()	(machine_arch_type == MACH_TYPE_HERBIE)
-+#else
-+# define machine_is_herbie()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAGICIAN
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MAGICIAN
-+# endif
-+# define machine_is_magician()	(machine_arch_type == MACH_TYPE_MAGICIAN)
-+#else
-+# define machine_is_magician()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CM4002
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CM4002
-+# endif
-+# define machine_is_cm4002()	(machine_arch_type == MACH_TYPE_CM4002)
-+#else
-+# define machine_is_cm4002()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_B4
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_B4
-+# endif
-+# define machine_is_b4()	(machine_arch_type == MACH_TYPE_B4)
-+#else
-+# define machine_is_b4()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAUI
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MAUI
-+# endif
-+# define machine_is_maui()	(machine_arch_type == MACH_TYPE_MAUI)
-+#else
-+# define machine_is_maui()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CYBERTRACKER_G
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CYBERTRACKER_G
-+# endif
-+# define machine_is_cybertracker_g()	(machine_arch_type == MACH_TYPE_CYBERTRACKER_G)
-+#else
-+# define machine_is_cybertracker_g()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXDKN
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NXDKN
-+# endif
-+# define machine_is_nxdkn()	(machine_arch_type == MACH_TYPE_NXDKN)
-+#else
-+# define machine_is_nxdkn()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MIO8390
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MIO8390
-+# endif
-+# define machine_is_mio8390()	(machine_arch_type == MACH_TYPE_MIO8390)
-+#else
-+# define machine_is_mio8390()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMI_BOARD
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMI_BOARD
-+# endif
-+# define machine_is_omi_board()	(machine_arch_type == MACH_TYPE_OMI_BOARD)
-+#else
-+# define machine_is_omi_board()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX21CIV
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MX21CIV
-+# endif
-+# define machine_is_mx21civ()	(machine_arch_type == MACH_TYPE_MX21CIV)
-+#else
-+# define machine_is_mx21civ()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAHI_CDAC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MAHI_CDAC
-+# endif
-+# define machine_is_mahi_cdac()	(machine_arch_type == MACH_TYPE_MAHI_CDAC)
-+#else
-+# define machine_is_mahi_cdac()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTX
-+# endif
-+# define machine_is_xscale_palmtx()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTX)
-+#else
-+# define machine_is_xscale_palmtx()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C2413
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_S3C2413
-+# endif
-+# define machine_is_s3c2413()	(machine_arch_type == MACH_TYPE_S3C2413)
-+#else
-+# define machine_is_s3c2413()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAMSYS_EP0
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SAMSYS_EP0
-+# endif
-+# define machine_is_samsys_ep0()	(machine_arch_type == MACH_TYPE_SAMSYS_EP0)
-+#else
-+# define machine_is_samsys_ep0()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WG302V1
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_WG302V1
-+# endif
-+# define machine_is_wg302v1()	(machine_arch_type == MACH_TYPE_WG302V1)
-+#else
-+# define machine_is_wg302v1()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WG302V2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_WG302V2
-+# endif
-+# define machine_is_wg302v2()	(machine_arch_type == MACH_TYPE_WG302V2)
-+#else
-+# define machine_is_wg302v2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EB42X
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EB42X
-+# endif
-+# define machine_is_eb42x()	(machine_arch_type == MACH_TYPE_EB42X)
-+#else
-+# define machine_is_eb42x()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ331ES
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IQ331ES
-+# endif
-+# define machine_is_iq331es()	(machine_arch_type == MACH_TYPE_IQ331ES)
-+#else
-+# define machine_is_iq331es()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COSYDSP
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_COSYDSP
-+# endif
-+# define machine_is_cosydsp()	(machine_arch_type == MACH_TYPE_COSYDSP)
-+#else
-+# define machine_is_cosydsp()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UPLAT7D
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_UPLAT7D
-+# endif
-+# define machine_is_uplat7d_proto()	(machine_arch_type == MACH_TYPE_UPLAT7D)
-+#else
-+# define machine_is_uplat7d_proto()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PTDAVINCI
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PTDAVINCI
-+# endif
-+# define machine_is_ptdavinci()	(machine_arch_type == MACH_TYPE_PTDAVINCI)
-+#else
-+# define machine_is_ptdavinci()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MBUS
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MBUS
-+# endif
-+# define machine_is_mbus()	(machine_arch_type == MACH_TYPE_MBUS)
-+#else
-+# define machine_is_mbus()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NADIA2VB
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NADIA2VB
-+# endif
-+# define machine_is_nadia2vb()	(machine_arch_type == MACH_TYPE_NADIA2VB)
-+#else
-+# define machine_is_nadia2vb()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_R1000
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_R1000
-+# endif
-+# define machine_is_r1000()	(machine_arch_type == MACH_TYPE_R1000)
-+#else
-+# define machine_is_r1000()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HW90250
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HW90250
-+# endif
-+# define machine_is_hw90250()	(machine_arch_type == MACH_TYPE_HW90250)
-+#else
-+# define machine_is_hw90250()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_2430SDP
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_2430SDP
-+# endif
-+# define machine_is_omap_2430sdp()	(machine_arch_type == MACH_TYPE_OMAP_2430SDP)
-+#else
-+# define machine_is_omap_2430sdp()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DAVINCI_EVM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DAVINCI_EVM
-+# endif
-+# define machine_is_davinci_evm()	(machine_arch_type == MACH_TYPE_DAVINCI_EVM)
-+#else
-+# define machine_is_davinci_evm()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_TORNADO
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_TORNADO
-+# endif
-+# define machine_is_omap_tornado()	(machine_arch_type == MACH_TYPE_OMAP_TORNADO)
-+#else
-+# define machine_is_omap_tornado()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OLOCREEK
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OLOCREEK
-+# endif
-+# define machine_is_olocreek()	(machine_arch_type == MACH_TYPE_OLOCREEK)
-+#else
-+# define machine_is_olocreek()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PALMZ72
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PALMZ72
-+# endif
-+# define machine_is_palmz72()	(machine_arch_type == MACH_TYPE_PALMZ72)
-+#else
-+# define machine_is_palmz72()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXDB500
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NXDB500
-+# endif
-+# define machine_is_nxdb500()	(machine_arch_type == MACH_TYPE_NXDB500)
-+#else
-+# define machine_is_nxdb500()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_APF9328
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_APF9328
-+# endif
-+# define machine_is_apf9328()	(machine_arch_type == MACH_TYPE_APF9328)
-+#else
-+# define machine_is_apf9328()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_WIPOQ
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_WIPOQ
-+# endif
-+# define machine_is_omap_wipoq()	(machine_arch_type == MACH_TYPE_OMAP_WIPOQ)
-+#else
-+# define machine_is_omap_wipoq()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_TWIP
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_TWIP
-+# endif
-+# define machine_is_omap_twip()	(machine_arch_type == MACH_TYPE_OMAP_TWIP)
-+#else
-+# define machine_is_omap_twip()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTREO650
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTREO650
-+# endif
-+# define machine_is_xscale_treo650()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650)
-+#else
-+# define machine_is_xscale_treo650()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ACUMEN
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ACUMEN
-+# endif
-+# define machine_is_acumen()	(machine_arch_type == MACH_TYPE_ACUMEN)
-+#else
-+# define machine_is_acumen()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XP100
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_XP100
-+# endif
-+# define machine_is_xp100()	(machine_arch_type == MACH_TYPE_XP100)
-+#else
-+# define machine_is_xp100()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FS2410
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_FS2410
-+# endif
-+# define machine_is_fs2410()	(machine_arch_type == MACH_TYPE_FS2410)
-+#else
-+# define machine_is_fs2410()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA270_CERF
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PXA270_CERF
-+# endif
-+# define machine_is_pxa270_cerf()	(machine_arch_type == MACH_TYPE_PXA270_CERF)
-+#else
-+# define machine_is_pxa270_cerf()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SQ2FTLPALM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SQ2FTLPALM
-+# endif
-+# define machine_is_sq2ftlpalm()	(machine_arch_type == MACH_TYPE_SQ2FTLPALM)
-+#else
-+# define machine_is_sq2ftlpalm()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BSEMSERVER
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BSEMSERVER
-+# endif
-+# define machine_is_bsemserver()	(machine_arch_type == MACH_TYPE_BSEMSERVER)
-+#else
-+# define machine_is_bsemserver()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NETCLIENT
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NETCLIENT
-+# endif
-+# define machine_is_netclient()	(machine_arch_type == MACH_TYPE_NETCLIENT)
-+#else
-+# define machine_is_netclient()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTT5
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTT5
-+# endif
-+# define machine_is_xscale_palmtt5()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTT5)
-+#else
-+# define machine_is_xscale_palmtt5()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_PALMTC
-+# endif
-+# define machine_is_xscale_palmtc()	(machine_arch_type == MACH_TYPE_OMAP_PALMTC)
-+#else
-+# define machine_is_xscale_palmtc()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_APOLLON
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_APOLLON
-+# endif
-+# define machine_is_omap_apollon()	(machine_arch_type == MACH_TYPE_OMAP_APOLLON)
-+#else
-+# define machine_is_omap_apollon()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARGONLVEVB
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ARGONLVEVB
-+# endif
-+# define machine_is_mxc30030evb()	(machine_arch_type == MACH_TYPE_ARGONLVEVB)
-+#else
-+# define machine_is_mxc30030evb()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REA_2D
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_REA_2D
-+# endif
-+# define machine_is_rea_2d()	(machine_arch_type == MACH_TYPE_REA_2D)
-+#else
-+# define machine_is_rea_2d()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TI3E524
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TI3E524
-+# endif
-+# define machine_is_eti3e524()	(machine_arch_type == MACH_TYPE_TI3E524)
-+#else
-+# define machine_is_eti3e524()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ATEB9200
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ATEB9200
-+# endif
-+# define machine_is_ateb9200()	(machine_arch_type == MACH_TYPE_ATEB9200)
-+#else
-+# define machine_is_ateb9200()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AUCKLAND
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AUCKLAND
-+# endif
-+# define machine_is_auckland()	(machine_arch_type == MACH_TYPE_AUCKLAND)
-+#else
-+# define machine_is_auckland()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AK3320M
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AK3320M
-+# endif
-+# define machine_is_ak3220m()	(machine_arch_type == MACH_TYPE_AK3320M)
-+#else
-+# define machine_is_ak3220m()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DURAMAX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DURAMAX
-+# endif
-+# define machine_is_duramax()	(machine_arch_type == MACH_TYPE_DURAMAX)
-+#else
-+# define machine_is_duramax()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_N35
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_N35
-+# endif
-+# define machine_is_n35()	(machine_arch_type == MACH_TYPE_N35)
-+#else
-+# define machine_is_n35()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PRONGHORN
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PRONGHORN
-+# endif
-+# define machine_is_pronghorn()	(machine_arch_type == MACH_TYPE_PRONGHORN)
-+#else
-+# define machine_is_pronghorn()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FUNDY
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_FUNDY
-+# endif
-+# define machine_is_fundy()	(machine_arch_type == MACH_TYPE_FUNDY)
-+#else
-+# define machine_is_fundy()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LOGICPD_PXA270
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_LOGICPD_PXA270
-+# endif
-+# define machine_is_logicpd_pxa270()	(machine_arch_type == MACH_TYPE_LOGICPD_PXA270)
-+#else
-+# define machine_is_logicpd_pxa270()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CPU777
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CPU777
-+# endif
-+# define machine_is_cpu777()	(machine_arch_type == MACH_TYPE_CPU777)
-+#else
-+# define machine_is_cpu777()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SIMICON9201
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SIMICON9201
-+# endif
-+# define machine_is_simicon9201()	(machine_arch_type == MACH_TYPE_SIMICON9201)
-+#else
-+# define machine_is_simicon9201()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LEAP2_HPM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_LEAP2_HPM
-+# endif
-+# define machine_is_leap2_hpm()	(machine_arch_type == MACH_TYPE_LEAP2_HPM)
-+#else
-+# define machine_is_leap2_hpm()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CM922TXA10
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CM922TXA10
-+# endif
-+# define machine_is_cm922txa10()	(machine_arch_type == MACH_TYPE_CM922TXA10)
-+#else
-+# define machine_is_cm922txa10()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PXA
-+# endif
-+# define machine_is_sandgate()	(machine_arch_type == MACH_TYPE_PXA)
-+#else
-+# define machine_is_sandgate()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SANDGATE2
-+# endif
-+# define machine_is_sandgate2()	(machine_arch_type == MACH_TYPE_SANDGATE2)
-+#else
-+# define machine_is_sandgate2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2G
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SANDGATE2G
-+# endif
-+# define machine_is_sandgate2g()	(machine_arch_type == MACH_TYPE_SANDGATE2G)
-+#else
-+# define machine_is_sandgate2g()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2P
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SANDGATE2P
-+# endif
-+# define machine_is_sandgate2p()	(machine_arch_type == MACH_TYPE_SANDGATE2P)
-+#else
-+# define machine_is_sandgate2p()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FRED_JACK
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_FRED_JACK
-+# endif
-+# define machine_is_fred_jack()	(machine_arch_type == MACH_TYPE_FRED_JACK)
-+#else
-+# define machine_is_fred_jack()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TTG_COLOR1
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TTG_COLOR1
-+# endif
-+# define machine_is_ttg_color1()	(machine_arch_type == MACH_TYPE_TTG_COLOR1)
-+#else
-+# define machine_is_ttg_color1()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXEB500HMI
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NXEB500HMI
-+# endif
-+# define machine_is_nxeb500hmi()	(machine_arch_type == MACH_TYPE_NXEB500HMI)
-+#else
-+# define machine_is_nxeb500hmi()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NETDCU8
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NETDCU8
-+# endif
-+# define machine_is_netdcu8()	(machine_arch_type == MACH_TYPE_NETDCU8)
-+#else
-+# define machine_is_netdcu8()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ML675050_CPU_BOA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ML675050_CPU_BOA
-+# endif
-+# define machine_is_ml675050_cpu_boa()	(machine_arch_type == MACH_TYPE_ML675050_CPU_BOA)
-+#else
-+# define machine_is_ml675050_cpu_boa()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NG_FVX538
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NG_FVX538
-+# endif
-+# define machine_is_ng_fvx538()	(machine_arch_type == MACH_TYPE_NG_FVX538)
-+#else
-+# define machine_is_ng_fvx538()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NG_FVS338
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NG_FVS338
-+# endif
-+# define machine_is_ng_fvs338()	(machine_arch_type == MACH_TYPE_NG_FVS338)
-+#else
-+# define machine_is_ng_fvs338()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX4103
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PNX4103
-+# endif
-+# define machine_is_pnx4103()	(machine_arch_type == MACH_TYPE_PNX4103)
-+#else
-+# define machine_is_pnx4103()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HESDB
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HESDB
-+# endif
-+# define machine_is_hesdb()	(machine_arch_type == MACH_TYPE_HESDB)
-+#else
-+# define machine_is_hesdb()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSILO
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_XSILO
-+# endif
-+# define machine_is_xsilo()	(machine_arch_type == MACH_TYPE_XSILO)
-+#else
-+# define machine_is_xsilo()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ESPRESSO
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ESPRESSO
-+# endif
-+# define machine_is_espresso()	(machine_arch_type == MACH_TYPE_ESPRESSO)
-+#else
-+# define machine_is_espresso()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMLC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EMLC
-+# endif
-+# define machine_is_emlc()	(machine_arch_type == MACH_TYPE_EMLC)
-+#else
-+# define machine_is_emlc()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SISTERON
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SISTERON
-+# endif
-+# define machine_is_sisteron()	(machine_arch_type == MACH_TYPE_SISTERON)
-+#else
-+# define machine_is_sisteron()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RX1950
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_RX1950
-+# endif
-+# define machine_is_rx1950()	(machine_arch_type == MACH_TYPE_RX1950)
-+#else
-+# define machine_is_rx1950()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TSC_VENUS
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TSC_VENUS
-+# endif
-+# define machine_is_tsc_venus()	(machine_arch_type == MACH_TYPE_TSC_VENUS)
-+#else
-+# define machine_is_tsc_venus()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS101J
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DS101J
-+# endif
-+# define machine_is_ds101j()	(machine_arch_type == MACH_TYPE_DS101J)
-+#else
-+# define machine_is_ds101j()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MXC30030ADS
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MXC30030ADS
-+# endif
-+# define machine_is_mxc30030ads()	(machine_arch_type == MACH_TYPE_MXC30030ADS)
-+#else
-+# define machine_is_mxc30030ads()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_FUJITSU_WIMAXSOC
-+# endif
-+# define machine_is_fujitsu_wimaxsoc()	(machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC)
-+#else
-+# define machine_is_fujitsu_wimaxsoc()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DUALPCMODEM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DUALPCMODEM
-+# endif
-+# define machine_is_dualpcmodem()	(machine_arch_type == MACH_TYPE_DUALPCMODEM)
-+#else
-+# define machine_is_dualpcmodem()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GESBC9312
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_GESBC9312
-+# endif
-+# define machine_is_gesbc9312()	(machine_arch_type == MACH_TYPE_GESBC9312)
-+#else
-+# define machine_is_gesbc9312()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCAPACHE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HTCAPACHE
-+# endif
-+# define machine_is_htcapache()	(machine_arch_type == MACH_TYPE_HTCAPACHE)
-+#else
-+# define machine_is_htcapache()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXDP435
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IXDP435
-+# endif
-+# define machine_is_ixdp435()	(machine_arch_type == MACH_TYPE_IXDP435)
-+#else
-+# define machine_is_ixdp435()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CATPROVT100
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CATPROVT100
-+# endif
-+# define machine_is_catprovt100()	(machine_arch_type == MACH_TYPE_CATPROVT100)
-+#else
-+# define machine_is_catprovt100()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PICOTUX1XX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PICOTUX1XX
-+# endif
-+# define machine_is_picotux1xx()	(machine_arch_type == MACH_TYPE_PICOTUX1XX)
-+#else
-+# define machine_is_picotux1xx()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PICOTUX2XX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PICOTUX2XX
-+# endif
-+# define machine_is_picotux2xx()	(machine_arch_type == MACH_TYPE_PICOTUX2XX)
-+#else
-+# define machine_is_picotux2xx()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DSMG600
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DSMG600
-+# endif
-+# define machine_is_dsmg600()	(machine_arch_type == MACH_TYPE_DSMG600)
-+#else
-+# define machine_is_dsmg600()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMPC2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EMPC2
-+# endif
-+# define machine_is_empc2()	(machine_arch_type == MACH_TYPE_EMPC2)
-+#else
-+# define machine_is_empc2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VENTURA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_VENTURA
-+# endif
-+# define machine_is_ventura()	(machine_arch_type == MACH_TYPE_VENTURA)
-+#else
-+# define machine_is_ventura()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PHIDGET_SBC
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PHIDGET_SBC
-+# endif
-+# define machine_is_phidget_sbc()	(machine_arch_type == MACH_TYPE_PHIDGET_SBC)
-+#else
-+# define machine_is_phidget_sbc()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IJ3K
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IJ3K
-+# endif
-+# define machine_is_ij3k()	(machine_arch_type == MACH_TYPE_IJ3K)
-+#else
-+# define machine_is_ij3k()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PISGAH
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PISGAH
-+# endif
-+# define machine_is_pisgah()	(machine_arch_type == MACH_TYPE_PISGAH)
-+#else
-+# define machine_is_pisgah()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_FSAMPLE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_FSAMPLE
-+# endif
-+# define machine_is_omap_fsample()	(machine_arch_type == MACH_TYPE_OMAP_FSAMPLE)
-+#else
-+# define machine_is_omap_fsample()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SG720
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SG720
-+# endif
-+# define machine_is_sg720()	(machine_arch_type == MACH_TYPE_SG720)
-+#else
-+# define machine_is_sg720()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REDFOX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_REDFOX
-+# endif
-+# define machine_is_redfox()	(machine_arch_type == MACH_TYPE_REDFOX)
-+#else
-+# define machine_is_redfox()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MYSH_EP9315_1
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MYSH_EP9315_1
-+# endif
-+# define machine_is_mysh_ep9315_1()	(machine_arch_type == MACH_TYPE_MYSH_EP9315_1)
-+#else
-+# define machine_is_mysh_ep9315_1()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TPF106
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TPF106
-+# endif
-+# define machine_is_tpf106()	(machine_arch_type == MACH_TYPE_TPF106)
-+#else
-+# define machine_is_tpf106()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91RM9200KG
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AT91RM9200KG
-+# endif
-+# define machine_is_at91rm9200kg()	(machine_arch_type == MACH_TYPE_AT91RM9200KG)
-+#else
-+# define machine_is_at91rm9200kg()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SLEDB
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SLEDB
-+# endif
-+# define machine_is_racemt2()	(machine_arch_type == MACH_TYPE_SLEDB)
-+#else
-+# define machine_is_racemt2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ONTRACK
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ONTRACK
-+# endif
-+# define machine_is_ontrack()	(machine_arch_type == MACH_TYPE_ONTRACK)
-+#else
-+# define machine_is_ontrack()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PM1200
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PM1200
-+# endif
-+# define machine_is_pm1200()	(machine_arch_type == MACH_TYPE_PM1200)
-+#else
-+# define machine_is_pm1200()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ESS24XXX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ESS24XXX
-+# endif
-+# define machine_is_ess24562()	(machine_arch_type == MACH_TYPE_ESS24XXX)
-+#else
-+# define machine_is_ess24562()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COREMP7
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_COREMP7
-+# endif
-+# define machine_is_coremp7()	(machine_arch_type == MACH_TYPE_COREMP7)
-+#else
-+# define machine_is_coremp7()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NEXCODER_6446
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NEXCODER_6446
-+# endif
-+# define machine_is_nexcoder_6446()	(machine_arch_type == MACH_TYPE_NEXCODER_6446)
-+#else
-+# define machine_is_nexcoder_6446()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STVC8380
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_STVC8380
-+# endif
-+# define machine_is_stvc8380()	(machine_arch_type == MACH_TYPE_STVC8380)
-+#else
-+# define machine_is_stvc8380()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TEKLYNX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_TEKLYNX
-+# endif
-+# define machine_is_teklynx()	(machine_arch_type == MACH_TYPE_TEKLYNX)
-+#else
-+# define machine_is_teklynx()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CARBONADO
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CARBONADO
-+# endif
-+# define machine_is_carbonado()	(machine_arch_type == MACH_TYPE_CARBONADO)
-+#else
-+# define machine_is_carbonado()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SYSMOS_MP730
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SYSMOS_MP730
-+# endif
-+# define machine_is_sysmos_mp730()	(machine_arch_type == MACH_TYPE_SYSMOS_MP730)
-+#else
-+# define machine_is_sysmos_mp730()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SNAPPER_CL15
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SNAPPER_CL15
-+# endif
-+# define machine_is_snapper_cl15()	(machine_arch_type == MACH_TYPE_SNAPPER_CL15)
-+#else
-+# define machine_is_snapper_cl15()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PGIGIM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PGIGIM
-+# endif
-+# define machine_is_pgigim()	(machine_arch_type == MACH_TYPE_PGIGIM)
-+#else
-+# define machine_is_pgigim()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PTX9160P2
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PTX9160P2
-+# endif
-+# define machine_is_ptx9160p2()	(machine_arch_type == MACH_TYPE_PTX9160P2)
-+#else
-+# define machine_is_ptx9160p2()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DCORE1
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DCORE1
-+# endif
-+# define machine_is_dcore1()	(machine_arch_type == MACH_TYPE_DCORE1)
-+#else
-+# define machine_is_dcore1()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VICTORPXA
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_VICTORPXA
-+# endif
-+# define machine_is_victorpxa()	(machine_arch_type == MACH_TYPE_VICTORPXA)
-+#else
-+# define machine_is_victorpxa()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX2DTB
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MX2DTB
-+# endif
-+# define machine_is_mx2dtb()	(machine_arch_type == MACH_TYPE_MX2DTB)
-+#else
-+# define machine_is_mx2dtb()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA_IREX_ER0100
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PXA_IREX_ER0100
-+# endif
-+# define machine_is_pxa_irex_er0100()	(machine_arch_type == MACH_TYPE_PXA_IREX_ER0100)
-+#else
-+# define machine_is_pxa_irex_er0100()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMZ71
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_PALMZ71
-+# endif
-+# define machine_is_omap_palmz71()	(machine_arch_type == MACH_TYPE_OMAP_PALMZ71)
-+#else
-+# define machine_is_omap_palmz71()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BARTEC_DEG
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BARTEC_DEG
-+# endif
-+# define machine_is_bartec_deg()	(machine_arch_type == MACH_TYPE_BARTEC_DEG)
-+#else
-+# define machine_is_bartec_deg()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HW50251
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HW50251
-+# endif
-+# define machine_is_hw50251()	(machine_arch_type == MACH_TYPE_HW50251)
-+#else
-+# define machine_is_hw50251()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IBOX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IBOX
-+# endif
-+# define machine_is_ibox()	(machine_arch_type == MACH_TYPE_IBOX)
-+#else
-+# define machine_is_ibox()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ATLASLH7A404
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ATLASLH7A404
-+# endif
-+# define machine_is_atlaslh7a404()	(machine_arch_type == MACH_TYPE_ATLASLH7A404)
-+#else
-+# define machine_is_atlaslh7a404()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PT2026
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PT2026
-+# endif
-+# define machine_is_pt2026()	(machine_arch_type == MACH_TYPE_PT2026)
-+#else
-+# define machine_is_pt2026()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCALPINE
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HTCALPINE
-+# endif
-+# define machine_is_htcalpine()	(machine_arch_type == MACH_TYPE_HTCALPINE)
-+#else
-+# define machine_is_htcalpine()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BARTEC_VTU
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BARTEC_VTU
-+# endif
-+# define machine_is_bartec_vtu()	(machine_arch_type == MACH_TYPE_BARTEC_VTU)
-+#else
-+# define machine_is_bartec_vtu()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VCOREII
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_VCOREII
-+# endif
-+# define machine_is_vcoreii()	(machine_arch_type == MACH_TYPE_VCOREII)
-+#else
-+# define machine_is_vcoreii()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PDNB3
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_PDNB3
-+# endif
-+# define machine_is_pdnb3()	(machine_arch_type == MACH_TYPE_PDNB3)
-+#else
-+# define machine_is_pdnb3()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCBEETLES
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HTCBEETLES
-+# endif
-+# define machine_is_htcbeetles()	(machine_arch_type == MACH_TYPE_HTCBEETLES)
-+#else
-+# define machine_is_htcbeetles()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C6400
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_S3C6400
-+# endif
-+# define machine_is_s3c6400()	(machine_arch_type == MACH_TYPE_S3C6400)
-+#else
-+# define machine_is_s3c6400()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C2443
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_S3C2443
-+# endif
-+# define machine_is_s3c2443()	(machine_arch_type == MACH_TYPE_S3C2443)
-+#else
-+# define machine_is_s3c2443()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_LDK
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OMAP_LDK
-+# endif
-+# define machine_is_omap_ldk()	(machine_arch_type == MACH_TYPE_OMAP_LDK)
-+#else
-+# define machine_is_omap_ldk()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2460
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SMDK2460
-+# endif
-+# define machine_is_smdk2460()	(machine_arch_type == MACH_TYPE_SMDK2460)
-+#else
-+# define machine_is_smdk2460()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2440
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SMDK2440
-+# endif
-+# define machine_is_smdk2440()	(machine_arch_type == MACH_TYPE_SMDK2440)
-+#else
-+# define machine_is_smdk2440()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2412
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SMDK2412
-+# endif
-+# define machine_is_smdk2412()	(machine_arch_type == MACH_TYPE_SMDK2412)
-+#else
-+# define machine_is_smdk2412()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WEBBOX
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_WEBBOX
-+# endif
-+# define machine_is_webbox()	(machine_arch_type == MACH_TYPE_WEBBOX)
-+#else
-+# define machine_is_webbox()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CWWNDP
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CWWNDP
-+# endif
-+# define machine_is_cwwndp()	(machine_arch_type == MACH_TYPE_CWWNDP)
-+#else
-+# define machine_is_cwwndp()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DRAGON
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DRAGON
-+# endif
-+# define machine_is_dragon()	(machine_arch_type == MACH_TYPE_DRAGON)
-+#else
-+# define machine_is_dragon()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OPENDO_CPU_BOARD
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_OPENDO_CPU_BOARD
-+# endif
-+# define machine_is_opendo_cpu_board()	(machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD)
-+#else
-+# define machine_is_opendo_cpu_board()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CCM2200
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CCM2200
-+# endif
-+# define machine_is_ccm2200()	(machine_arch_type == MACH_TYPE_CCM2200)
-+#else
-+# define machine_is_ccm2200()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ETWARM
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_ETWARM
-+# endif
-+# define machine_is_etwarm()	(machine_arch_type == MACH_TYPE_ETWARM)
-+#else
-+# define machine_is_etwarm()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_M93030
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_M93030
-+# endif
-+# define machine_is_m93030()	(machine_arch_type == MACH_TYPE_M93030)
-+#else
-+# define machine_is_m93030()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CC7U
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_CC7U
-+# endif
-+# define machine_is_cc7u()	(machine_arch_type == MACH_TYPE_CC7U)
-+#else
-+# define machine_is_cc7u()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MTT_RANGER
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_MTT_RANGER
-+# endif
-+# define machine_is_mtt_ranger()	(machine_arch_type == MACH_TYPE_MTT_RANGER)
-+#else
-+# define machine_is_mtt_ranger()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NEXUS
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NEXUS
-+# endif
-+# define machine_is_nexus()	(machine_arch_type == MACH_TYPE_NEXUS)
-+#else
-+# define machine_is_nexus()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DESMAN
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DESMAN
-+# endif
-+# define machine_is_desman()	(machine_arch_type == MACH_TYPE_DESMAN)
-+#else
-+# define machine_is_desman()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BKDE303
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BKDE303
-+# endif
-+# define machine_is_bkde303()	(machine_arch_type == MACH_TYPE_BKDE303)
-+#else
-+# define machine_is_bkde303()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2413
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SMDK2413
-+# endif
-+# define machine_is_smdk2413()	(machine_arch_type == MACH_TYPE_SMDK2413)
-+#else
-+# define machine_is_smdk2413()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AML_M7200
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AML_M7200
-+# endif
-+# define machine_is_aml_m7200()	(machine_arch_type == MACH_TYPE_AML_M7200)
-+#else
-+# define machine_is_aml_m7200()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AML_M5900
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AML_M5900
-+# endif
-+# define machine_is_aml_m5900()	(machine_arch_type == MACH_TYPE_AML_M5900)
-+#else
-+# define machine_is_aml_m5900()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SG640
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_SG640
-+# endif
-+# define machine_is_sg640()	(machine_arch_type == MACH_TYPE_SG640)
-+#else
-+# define machine_is_sg640()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDG79524
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_EDG79524
-+# endif
-+# define machine_is_edg79524()	(machine_arch_type == MACH_TYPE_EDG79524)
-+#else
-+# define machine_is_edg79524()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AI2410
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_AI2410
-+# endif
-+# define machine_is_ai2410()	(machine_arch_type == MACH_TYPE_AI2410)
-+#else
-+# define machine_is_ai2410()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXP465
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_IXP465
-+# endif
-+# define machine_is_ixp465()	(machine_arch_type == MACH_TYPE_IXP465)
-+#else
-+# define machine_is_ixp465()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BALLOON3
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_BALLOON3
-+# endif
-+# define machine_is_balloon3()	(machine_arch_type == MACH_TYPE_BALLOON3)
-+#else
-+# define machine_is_balloon3()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_QT2410
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_QT2410
-+# endif
-+# define machine_is_qt2410()	(machine_arch_type == MACH_TYPE_QT2410)
-+#else
-+# define machine_is_qt2410()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NEO1973_GTA01
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NEO1973_GTA01
-+# endif
-+# define machine_is_neo1973_gta01()	(machine_arch_type == MACH_TYPE_NEO1973_GTA01)
-+#else
-+# define machine_is_neo1973_gta01()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HXD8
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_HXD8
-+# endif
-+# define machine_is_hxd8()	(machine_arch_type == MACH_TYPE_HXD8)
-+#else
-+# define machine_is_neo8()	(0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NEO1973_GTA02
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_NEO1973_GTA02
-+# endif
-+# define machine_is_neo1973_gta02()	(machine_arch_type == MACH_TYPE_NEO1973_GTA02)
-+#else
-+# define machine_is_neo1973_gta02()	(0)
-+#endif
-+
-+
- /*
-  * These have not yet been registered
-  */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-mokoversion.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-mokoversion.patch
deleted file mode 100644
index a44434155e..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-mokoversion.patch
+++ /dev/null
@@ -1,10 +0,0 @@
-Index: u-boot/tools/setlocalversion
-===================================================================
---- u-boot.orig/tools/setlocalversion	2007-03-26 14:42:58.000000000 +0200
-+++ u-boot/tools/setlocalversion	2007-03-26 14:46:47.000000000 +0200
-@@ -20,3 +20,5 @@
- 		printf '%s' -dirty
- 	fi
- fi
-+
-+printf '%s' -moko9
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-nand-markbad-reallybad.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-nand-markbad-reallybad.patch
deleted file mode 100644
index d630889e3c..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-nand-markbad-reallybad.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-This patch makes sure that the 'nand markbad' command does not only mark a block
-'bad' in the bad-block table, but _also_ marks it bad in the OOB area.
-
-we need this to preserve the bad block status when re-creating the bad block table
-at some later point.
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-Index: u-boot/drivers/nand/nand_base.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_base.c	2007-03-01 12:47:31.000000000 +0100
-+++ u-boot/drivers/nand/nand_base.c	2007-03-01 12:48:08.000000000 +0100
-@@ -481,7 +481,7 @@
- 
- 	/* Do we have a flash based bad block table ? */
- 	if (this->options & NAND_USE_FLASH_BBT)
--		return nand_update_bbt (mtd, ofs);
-+		nand_update_bbt (mtd, ofs);
- 
- 	/* We write two bytes, so we dont have to mess with 16 bit access */
- 	ofs += mtd->oobsize + (this->badblockpos & ~0x01);
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-neo1973-defaultenv.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-neo1973-defaultenv.patch
deleted file mode 100644
index 9753526d92..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-neo1973-defaultenv.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h	2007-02-27 00:43:16.000000000 +0100
-+++ u-boot/include/configs/neo1973_gta01.h	2007-02-27 00:47:49.000000000 +0100
-@@ -115,8 +115,8 @@
- #include <cmd_confdefs.h>
- 
- #define CONFIG_BOOTDELAY	3
--#define CONFIG_BOOTARGS    	"rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
--#define CONFIG_BOOTCOMMAND	"nand read.e 0x32000000 0x34000 0x200000; bootm 0x32000000"
-+#define CONFIG_BOOTARGS    	""
-+#define CONFIG_BOOTCOMMAND	"setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000"
- 
- #define CONFIG_DOS_PARTITION	1
- 
-@@ -181,11 +181,14 @@
- #define CONFIG_USBD_PRODUCTID_CDCACM 	0x5119    /* CDC ACM */
- #define CONFIG_USBD_MANUFACTURER	"Openmoko, Inc"
- #define CONFIG_USBD_PRODUCT_NAME	"Neo1973 Bootloader " U_BOOT_VERSION
--#define CONFIG_EXTRA_ENV_SETTINGS 	"usbtty=cdc_acm\0"
- #define CONFIG_USBD_DFU			1
- #define CONFIG_USBD_DFU_XFER_SIZE 	4096	/* 0x4000 */
- #define CONFIG_USBD_DFU_INTERFACE	2
- 
-+#define CONFIG_EXTRA_ENV_SETTINGS 					\
-+	"usbtty=cdc_acm\0"						\
-+	"bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8\0" \
-+	""
- 
- /*-----------------------------------------------------------------------
-  * Physical Memory Map
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-neo1973-resume.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-neo1973-resume.patch
deleted file mode 100644
index 19d912620d..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-neo1973-resume.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-Resume support for low-level uboot code, Version 5
-
-Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S	2007-02-28 03:51:24.000000000 +0100
-+++ u-boot/cpu/arm920t/start.S	2007-03-01 02:43:47.000000000 +0100
-@@ -158,18 +158,68 @@
- 	str	r1, [r0]
- # endif
- 
-+	/* default FCLK is 202 MHz ! */
-+#define LOCKTIME	0x4c000000
-+#define UPLLCON		0x4c000008
-+//#define MPLLCFG		((0x90 << 12) + (0x2 << 4) + 0x2)
-+#define MPLLCFG		((0x90 << 12) + (0x7 << 4) + 0x0)
-+#define UPLLCFG		((0x78 << 12) + (0x2 << 4) + 0x3)
-+	ldr	r0, =LOCKTIME
-+	mov	r1, #0xffffff
-+	str	r1, [r0]
-+
-+	ldr	r0, =UPLLCON
-+	ldr	r1, =UPLLCFG
-+	str	r1, [r0]
-+
-+	/* Page 7-19, seven nops between UPLL and MPLL */
-+	nop
-+	nop
-+	nop
-+	nop
-+	nop
-+	nop
-+	nop
-+
-+	ldr	r1, =MPLLCFG
-+	str	r1, [r0, #-4]		/* MPLLCON */
-+
- 	/* FCLK:HCLK:PCLK = 1:2:4 */
--	/* default FCLK is 120 MHz ! */
- 	ldr	r0, =CLKDIVN
- 	mov	r1, #3
- 	str	r1, [r0]
-+
-+#if 1
-+	/* enable uart */
-+	ldr	r0, =0x4c00000c		/* clkcon */
-+	ldr	r1, =0x7fff0		/* all clocks on */
-+	str	r1, [r0]
-+
-+	/* gpio UART0 init */
-+	ldr	r0, =0x56000070
-+	mov	r1, #0xaa
-+	str	r1, [r0]
-+
-+	/* init uart */
-+	ldr	r0, =0x50000000
-+	mov	r1, #0x03
-+	str	r1, [r0]
-+	ldr	r1, =0x245
-+	str	r1, [r0, #0x04]
-+	mov	r1, #0x01
-+	str	r1, [r0, #0x08]
-+	mov	r1, #0x00
-+	str	r1, [r0, #0x0c]
-+	mov	r1, #0x1a
-+	str	r1, [r0, #0x28]
-+#endif
-+
- #endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 */
- 
- #ifndef CONFIG_SKIP_LOWLEVEL_INIT
- #ifndef CONFIG_LL_INIT_NAND_ONLY
- 	bl	cpu_init_crit
- #endif
--#endif
- 
- #ifndef CONFIG_SKIP_RELOCATE_UBOOT
- 	adr	r0, _start		/* r0 <- current position of code   */
-@@ -202,9 +252,33 @@
- 
- #ifdef CONFIG_S3C2410_NAND_BOOT
- nand_load:
-+	/* take sdram out of power down */
-+	ldr	r0, =0x56000080		/* misccr */
-+	ldr	r1, [ r0 ]
-+	bic	r1, r1, #(S3C2410_MISCCR_nEN_SCLK0 | S3C2410_MISCCR_nEN_SCLK1 | S3C2410_MISCCR_nEN_SCLKE)
-+	str	r1, [ r0 ]
-+
-+	/* ensure signals stabalise */
-+	mov	r1, #128
-+1:	subs	r1, r1, #1
-+	bpl	1b
-+
- #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY)
- 	bl	cpu_init_crit
- #endif
-+#if defined(CONFIG_S3C2410)
-+	/* ensure some refresh has happened */
-+	ldr	r1, =0xfffff
-+1:	subs	r1, r1, #1
-+	bpl	1b
-+
-+	/* test for resume */
-+	ldr	r1, =0x560000B4		/* gstatus2 */
-+	ldr	r0, [ r1 ]
-+	tst	r0, #0x02		/* is this resume from power down */
-+	ldrne	pc, [r1, #4]		/* gstatus3 */
-+#endif /* CONFIG_S3C2410 */
-+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
- 
- 	/* mov	r10, lr */
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-misccr-definitions.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-misccr-definitions.patch
deleted file mode 100644
index 6efe24651a..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-misccr-definitions.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-Index: u-boot/include/s3c2410.h
-===================================================================
---- u-boot.orig/include/s3c2410.h
-+++ u-boot/include/s3c2410.h
-@@ -233,4 +233,40 @@ static inline S3C2410_SDI * S3C2410_GetB
- 		 rINTPND;\
- 		 }
- /* Wait until rINTPND is changed for the case that the ISR is very short. */
-+
-+#define S3C2410_MISCCR_USBDEV	    (0<<3)
-+#define S3C2410_MISCCR_USBHOST	    (1<<3)
-+
-+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
-+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
-+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
-+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
-+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
-+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
-+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
-+
-+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
-+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
-+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
-+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
-+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
-+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
-+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
-+
-+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
-+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
-+
-+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
-+
-+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
-+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)
-+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
-+
-+#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
-+#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
-+#define S3C2410_CLKSLOW_SLOW		(1<<4)
-+#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
-+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
-+
- #endif /*__S3C2410_H__*/
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-mmc.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-mmc.patch
deleted file mode 100644
index 2d185f7a41..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-mmc.patch
+++ /dev/null
@@ -1,818 +0,0 @@
-This patch adds MMC/SD support to the S3C2410 SoC code in
-u-boot
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/cpu/arm920t/s3c24x0/Makefile
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/Makefile
-+++ u-boot/cpu/arm920t/s3c24x0/Makefile
-@@ -26,7 +26,7 @@
- LIB	= $(obj)lib$(SOC).a
- 
- COBJS	= i2c.o interrupts.o serial.o speed.o \
--	  usb_ohci.o nand_read.o nand.o cmd_s3c2410.o
-+	  usb_ohci.o nand_read.o nand.o mmc.o cmd_s3c2410.o
- 
- SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
- OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-Index: u-boot/cpu/arm920t/s3c24x0/mmc.c
-===================================================================
---- /dev/null
-+++ u-boot/cpu/arm920t/s3c24x0/mmc.c
-@@ -0,0 +1,531 @@
-+/*
-+ * u-boot S3C2410 MMC/SD card driver
-+ * (C) Copyright 2006 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on u-boot pxa MMC driver and linux/drivers/mmc/s3c2410mci.c
-+ * (C) 2005-2005 Thomas Kleffel
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <config.h>
-+#include <common.h>
-+#include <mmc.h>
-+#include <asm/errno.h>
-+#include <asm/io.h>
-+#include <s3c2410.h>
-+#include <part.h>
-+#include <fat.h>
-+
-+#ifdef CONFIG_MMC
-+
-+#define CONFIG_MMC_WIDE
-+
-+static S3C2410_SDI *sdi;
-+
-+static block_dev_desc_t mmc_dev;
-+
-+block_dev_desc_t * mmc_get_dev(int dev)
-+{
-+	return ((block_dev_desc_t *)&mmc_dev);
-+}
-+
-+/*
-+ * FIXME needs to read cid and csd info to determine block size
-+ * and other parameters
-+ */
-+static uchar mmc_buf[MMC_BLOCK_SIZE];
-+static mmc_csd_t mmc_csd;
-+static int mmc_ready = 0;
-+static int wide = 0;
-+
-+
-+#define CMD_F_RESP	0x01
-+#define CMD_F_RESP_LONG	0x02
-+
-+static u_int32_t *mmc_cmd(ushort cmd, ulong arg, ushort flags)
-+{
-+	static u_int32_t resp[5];
-+
-+	u_int32_t ccon, csta;
-+	u_int32_t csta_rdy_bit = S3C2410_SDICMDSTAT_CMDSENT;
-+
-+	memset(resp, 0, sizeof(resp));
-+
-+	debug("mmc_cmd CMD%d arg=0x%08x flags=%x\n", cmd, arg, flags);
-+
-+	sdi->SDICSTA = 0xffffffff;
-+	sdi->SDIDSTA = 0xffffffff;
-+	sdi->SDIFSTA = 0xffffffff;
-+
-+	sdi->SDICARG = arg;
-+
-+	ccon = cmd & S3C2410_SDICMDCON_INDEX;
-+	ccon |= S3C2410_SDICMDCON_SENDERHOST|S3C2410_SDICMDCON_CMDSTART;
-+
-+	if (flags & CMD_F_RESP) {
-+		ccon |= S3C2410_SDICMDCON_WAITRSP;
-+		csta_rdy_bit = S3C2410_SDICMDSTAT_RSPFIN; /* 1 << 9 */
-+	}
-+
-+	if (flags & CMD_F_RESP_LONG)
-+		ccon |= S3C2410_SDICMDCON_LONGRSP;
-+
-+	sdi->SDICCON = ccon;
-+
-+	while (1) {
-+		csta = sdi->SDICSTA;
-+		if (csta & csta_rdy_bit)
-+			break;
-+		if (csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
-+			printf("===============> MMC CMD Timeout\n");
-+			sdi->SDICSTA |= S3C2410_SDICMDSTAT_CMDTIMEOUT;
-+			break;
-+		}
-+	}
-+
-+	debug("final MMC CMD status 0x%x\n", csta);
-+
-+	sdi->SDICSTA |= csta_rdy_bit;
-+
-+	if (flags & CMD_F_RESP) {
-+		resp[0] = sdi->SDIRSP0;
-+		resp[1] = sdi->SDIRSP1;
-+		resp[2] = sdi->SDIRSP2;
-+		resp[3] = sdi->SDIRSP3;
-+	}
-+
-+	return resp;
-+}
-+
-+#define FIFO_FILL(host) ((host->SDIFSTA & S3C2410_SDIFSTA_COUNTMASK) >> 2)
-+
-+static int mmc_block_read(uchar *dst, ulong src, ulong len)
-+{
-+	u_int32_t dcon, fifo;
-+	u_int32_t *dst_u32 = (u_int32_t *)dst;
-+	u_int32_t *resp;
-+
-+	if (len == 0)
-+		return 0;
-+
-+	debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len);
-+
-+	/* set block len */
-+	resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, len, CMD_F_RESP);
-+	sdi->SDIBSIZE = len;
-+
-+	//sdi->SDIPRE = 0xff;
-+
-+	/* setup data */
-+	dcon = (len >> 9) & S3C2410_SDIDCON_BLKNUM;
-+	dcon |= S3C2410_SDIDCON_BLOCKMODE;
-+	dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART;
-+	if (wide)
-+		dcon |= S3C2410_SDIDCON_WIDEBUS;
-+	sdi->SDIDCON = dcon;
-+
-+	/* send read command */
-+	resp = mmc_cmd(MMC_CMD_READ_BLOCK, src, CMD_F_RESP);
-+
-+	while (len > 0) {
-+		u_int32_t sdidsta = sdi->SDIDSTA;
-+		fifo = FIFO_FILL(sdi);
-+		if (sdidsta & (S3C2410_SDIDSTA_FIFOFAIL|
-+				S3C2410_SDIDSTA_CRCFAIL|
-+				S3C2410_SDIDSTA_RXCRCFAIL|
-+				S3C2410_SDIDSTA_DATATIMEOUT)) {
-+			printf("mmc_block_read: err SDIDSTA=0x%08x\n", sdidsta);
-+			return -EIO;
-+		}
-+
-+		while (fifo--) {
-+			//debug("dst_u32 = 0x%08x\n", dst_u32);
-+			*(dst_u32++) = sdi->SDIDAT;
-+			if (len >= 4)
-+				len -= 4;
-+			else {
-+				len = 0;
-+				break;
-+			}
-+		}
-+	}
-+
-+	debug("waiting for SDIDSTA  (currently 0x%08x\n", sdi->SDIDSTA);
-+	while (!(sdi->SDIDSTA & (1 << 4))) {}
-+	debug("done waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA);
-+
-+	sdi->SDIDCON = 0;
-+
-+	if (!(sdi->SDIDSTA & S3C2410_SDIDSTA_XFERFINISH))
-+		debug("mmc_block_read; transfer not finished!\n");
-+
-+	return 0;
-+}
-+
-+static int mmc_block_write(ulong dst, uchar *src, int len)
-+{
-+	printf("MMC block write not yet supported on S3C2410!\n");
-+	return -1;
-+}
-+
-+
-+int mmc_read(ulong src, uchar *dst, int size)
-+{
-+	ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
-+	ulong mmc_block_size, mmc_block_address;
-+
-+	if (size == 0)
-+		return 0;
-+
-+	if (!mmc_ready) {
-+		printf("Please initialize the MMC first\n");
-+		return -1;
-+	}
-+
-+	mmc_block_size = MMC_BLOCK_SIZE;
-+	mmc_block_address = ~(mmc_block_size - 1);
-+
-+	src -= CFG_MMC_BASE;
-+	end = src + size;
-+	part_start = ~mmc_block_address & src;
-+	part_end = ~mmc_block_address & end;
-+	aligned_start = mmc_block_address & src;
-+	aligned_end = mmc_block_address & end;
-+
-+	/* all block aligned accesses */
-+	debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+	src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+	if (part_start) {
-+		part_len = mmc_block_size - part_start;
-+		debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+		src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+		if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0)
-+			return -1;
-+
-+		memcpy(dst, mmc_buf+part_start, part_len);
-+		dst += part_len;
-+		src += part_len;
-+	}
-+	debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+	src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+	for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
-+		debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+		src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+		if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0)
-+			return -1;
-+	}
-+	debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+	src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+	if (part_end && src < end) {
-+		debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+		src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+		if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0)
-+			return -1;
-+
-+		memcpy(dst, mmc_buf, part_end);
-+	}
-+	return 0;
-+}
-+
-+int mmc_write(uchar *src, ulong dst, int size)
-+{
-+	ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
-+	ulong mmc_block_size, mmc_block_address;
-+
-+	if (size == 0)
-+		return 0;
-+
-+	if (!mmc_ready) {
-+		printf("Please initialize the MMC first\n");
-+		return -1;
-+	}
-+
-+	mmc_block_size = MMC_BLOCK_SIZE;
-+	mmc_block_address = ~(mmc_block_size - 1);
-+
-+	dst -= CFG_MMC_BASE;
-+	end = dst + size;
-+	part_start = ~mmc_block_address & dst;
-+	part_end = ~mmc_block_address & end;
-+	aligned_start = mmc_block_address & dst;
-+	aligned_end = mmc_block_address & end;
-+
-+	/* all block aligned accesses */
-+	debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+	src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+	if (part_start) {
-+		part_len = mmc_block_size - part_start;
-+		debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+		(ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end);
-+		if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0)
-+			return -1;
-+
-+		memcpy(mmc_buf+part_start, src, part_len);
-+		if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0)
-+			return -1;
-+
-+		dst += part_len;
-+		src += part_len;
-+	}
-+	debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+	src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+	for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
-+		debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+		src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+		if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0)
-+			return -1;
-+
-+	}
-+	debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+	src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+	if (part_end && dst < end) {
-+		debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+		src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+		if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0)
-+			return -1;
-+
-+		memcpy(mmc_buf, src, part_end);
-+		if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0)
-+			return -1;
-+
-+	}
-+	return 0;
-+}
-+
-+ulong mmc_bread(int dev_num, ulong blknr, ulong blkcnt, void *dst)
-+{
-+	int mmc_block_size = MMC_BLOCK_SIZE;
-+	ulong src = blknr * mmc_block_size + CFG_MMC_BASE;
-+
-+	mmc_read(src, dst, blkcnt*mmc_block_size);
-+	return blkcnt;
-+}
-+
-+/* MMC_DEFAULT_RCA should probably be just 1, but this may break other code
-+   that expects it to be shifted. */
-+static u_int16_t rca = MMC_DEFAULT_RCA >> 16;
-+
-+static u_int32_t mmc_size(const struct mmc_csd *csd)
-+{
-+	u_int32_t block_len, mult, blocknr;
-+
-+	block_len = csd->read_bl_len << 12;
-+	mult = csd->c_size_mult1 << 8;
-+	blocknr = (csd->c_size+1) * mult;
-+
-+	return blocknr * block_len;
-+}
-+
-+struct sd_cid {
-+	char		pnm_0;	/* product name */
-+	char		oid_1;	/* OEM/application ID */
-+	char		oid_0;
-+	uint8_t		mid;	/* manufacturer ID */
-+	char		pnm_4;
-+	char		pnm_3;
-+	char		pnm_2;
-+	char		pnm_1;
-+	uint8_t		psn_2;	/* product serial number */
-+	uint8_t		psn_1;
-+	uint8_t		psn_0;	/* MSB */
-+	uint8_t		prv;	/* product revision */
-+	uint8_t		crc;	/* CRC7 checksum, b0 is unused and set to 1 */
-+	uint8_t		mdt_1;	/* manufacturing date, LSB, RRRRyyyy yyyymmmm */
-+	uint8_t		mdt_0;	/* MSB */
-+	uint8_t		psn_3;	/* LSB */
-+};
-+
-+static void print_mmc_cid(mmc_cid_t *cid)
-+{
-+	printf("MMC found. Card desciption is:\n");
-+	printf("Manufacturer ID = %02x%02x%02x\n",
-+		cid->id[0], cid->id[1], cid->id[2]);
-+	printf("HW/FW Revision = %x %x\n",cid->hwrev, cid->fwrev);
-+	cid->hwrev = cid->fwrev = 0;	/* null terminate string */
-+	printf("Product Name = %s\n",cid->name);
-+	printf("Serial Number = %02x%02x%02x\n",
-+		cid->sn[0], cid->sn[1], cid->sn[2]);
-+	printf("Month = %d\n",cid->month);
-+	printf("Year = %d\n",1997 + cid->year);
-+}
-+
-+static void print_sd_cid(const struct sd_cid *cid)
-+{
-+	printf("Manufacturer:       0x%02x, OEM \"%c%c\"\n",
-+	    cid->mid, cid->oid_0, cid->oid_1);
-+	printf("Product name:       \"%c%c%c%c%c\", revision %d.%d\n",
-+	    cid->pnm_0, cid->pnm_1, cid->pnm_2, cid->pnm_3, cid->pnm_4,
-+	    cid->prv >> 4, cid->prv & 15);
-+	printf("Serial number:      %u\n",
-+	    cid->psn_0 << 24 | cid->psn_1 << 16 | cid->psn_2 << 8 |
-+	    cid->psn_3);
-+	printf("Manufacturing date: %d/%d\n",
-+	    cid->mdt_1 & 15,
-+	    2000+((cid->mdt_0 & 15) << 4)+((cid->mdt_1 & 0xf0) >> 4));
-+	printf("CRC:                0x%02x, b0 = %d\n",
-+	    cid->crc >> 1, cid->crc & 1);
-+}
-+
-+int mmc_init(int verbose)
-+{
-+ 	int retries, rc = -ENODEV;
-+	int is_sd = 0;
-+	u_int32_t *resp;
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+
-+	sdi = S3C2410_GetBase_SDI();
-+
-+	debug("mmc_init(PCLK=%u)\n", get_PCLK());
-+
-+	clk_power->CLKCON |= (1 << 9);
-+
-+	/* S3C2410 has some bug that prevents reliable operation at higher speed */
-+	//sdi->SDIPRE = 0x3e;  /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
-+	sdi->SDIPRE = 0x02;  /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
-+	sdi->SDIBSIZE = 512;
-+	sdi->SDIDTIMER = 0xffff;
-+	sdi->SDIIMSK = 0x0;
-+	sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK;
-+	udelay(125000); /* FIXME: 74 SDCLK cycles */
-+
-+	mmc_csd.c_size = 0;
-+
-+	/* reset */
-+	retries = 10;
-+	resp = mmc_cmd(MMC_CMD_RESET, 0, 0);
-+
-+	printf("trying to detect SD Card...\n");
-+	while (retries--) {
-+		udelay(100000);
-+		resp = mmc_cmd(55, 0x00000000, CMD_F_RESP);
-+		resp = mmc_cmd(41, 0x00300000, CMD_F_RESP);
-+
-+		if (resp[0] & (1 << 31)) {
-+			is_sd = 1;
-+			break;
-+		}
-+	}
-+
-+	if (retries == 0 && !is_sd) {
-+		retries = 10;
-+		printf("failed to detect SD Card, trying MMC\n");
-+		resp = mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ffc000, CMD_F_RESP);
-+		while (retries-- && resp && !(resp[4] & 0x80)) {
-+			debug("resp %x %x\n", resp[0], resp[1]);
-+			udelay(50);
-+			resp = mmc_cmd(1, 0x00ffff00, CMD_F_RESP);
-+		}
-+	}
-+
-+	/* try to get card id */
-+	resp = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, CMD_F_RESP|CMD_F_RESP_LONG);
-+	if (resp) {
-+		if (!is_sd) {
-+			/* TODO configure mmc driver depending on card
-+			   attributes */
-+			mmc_cid_t *cid = (mmc_cid_t *)resp;
-+
-+			if (verbose)
-+				print_mmc_cid(cid);
-+			sprintf((char *) mmc_dev.vendor,
-+				"Man %02x%02x%02x Snr %02x%02x%02x",
-+				cid->id[0], cid->id[1], cid->id[2],
-+				cid->sn[0], cid->sn[1], cid->sn[2]);
-+			sprintf((char *) mmc_dev.product,"%s",cid->name);
-+			sprintf((char *) mmc_dev.revision,"%x %x",
-+				cid->hwrev, cid->fwrev);
-+		}
-+		else {
-+			struct sd_cid *cid = (struct sd_cid *) resp;
-+
-+			if (verbose)
-+				print_sd_cid(cid);
-+			sprintf((char *) mmc_dev.vendor,
-+			    "Man %02 OEM %c%c \"%c%c%c%c%c\"",
-+			    cid->mid, cid->oid_0, cid->oid_1,
-+			    cid->pnm_0, cid->pnm_1, cid->pnm_2, cid->pnm_3,
-+			    cid->pnm_4);
-+			sprintf((char *) mmc_dev.product, "%d",
-+			    cid->psn_0 << 24 | cid->psn_1 << 16 |
-+			    cid->psn_2 << 8 | cid->psn_3);
-+			sprintf((char *) mmc_dev.revision, "%d.%d",
-+			    cid->prv >> 4, cid->prv & 15);
-+		}
-+
-+		/* fill in device description */
-+		mmc_dev.if_type = IF_TYPE_MMC;
-+		mmc_dev.part_type = PART_TYPE_DOS;
-+		mmc_dev.dev = 0;
-+		mmc_dev.lun = 0;
-+		mmc_dev.type = 0;
-+		/* FIXME fill in the correct size (is set to 32MByte) */
-+		mmc_dev.blksz = 512;
-+		mmc_dev.lba = 0x10000;
-+		mmc_dev.removable = 0;
-+		mmc_dev.block_read = mmc_bread;
-+
-+		/* MMC exists, get CSD too */
-+		resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, CMD_F_RESP);
-+		if (is_sd)
-+			rca = resp[0] >> 16;
-+
-+		resp = mmc_cmd(MMC_CMD_SEND_CSD, rca<<16, CMD_F_RESP|CMD_F_RESP_LONG);
-+		if (resp) {
-+			mmc_csd_t *csd = (mmc_csd_t *)resp;
-+			memcpy(&mmc_csd, csd, sizeof(csd));
-+			rc = 0;
-+			mmc_ready = 1;
-+			/* FIXME add verbose printout for csd */
-+			printf("READ_BL_LEN=%u, C_SIZE_MULT=%u, C_SIZE=%u\n",
-+				csd->read_bl_len, csd->c_size_mult1, csd->c_size);
-+			printf("size = %u\n", mmc_size(csd));
-+		}
-+	}
-+
-+	resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca<<16, CMD_F_RESP);
-+
-+#ifdef CONFIG_MMC_WIDE
-+	if (is_sd) {
-+		resp = mmc_cmd(55, rca<<16, CMD_F_RESP);
-+		resp = mmc_cmd(6, 0x02, CMD_F_RESP);
-+		wide = 1;
-+	}
-+#endif
-+
-+	fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
-+
-+	return rc;
-+}
-+
-+int
-+mmc_ident(block_dev_desc_t *dev)
-+{
-+	return 0;
-+}
-+
-+int
-+mmc2info(ulong addr)
-+{
-+	/* FIXME hard codes to 32 MB device */
-+	if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000)
-+		return 1;
-+
-+	return 0;
-+}
-+
-+#endif	/* CONFIG_MMC */
-Index: u-boot/include/asm-arm/arch-s3c24x0/mmc.h
-===================================================================
---- /dev/null
-+++ u-boot/include/asm-arm/arch-s3c24x0/mmc.h
-@@ -0,0 +1,112 @@
-+/*
-+ *  linux/drivers/mmc/mmc_pxa.h
-+ *
-+ *  Author: Vladimir Shebordaev, Igor Oblakov
-+ *  Copyright:  MontaVista Software Inc.
-+ *
-+ *  $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ */
-+#ifndef __MMC_PXA_P_H__
-+#define __MMC_PXA_P_H__
-+
-+#include <asm/arch/regs-sdi.h>
-+
-+#define MMC_DEFAULT_RCA			(1<<16)
-+
-+#define MMC_BLOCK_SIZE			512
-+#define MMC_CMD_RESET			0
-+#define MMC_CMD_SEND_OP_COND		1
-+#define MMC_CMD_ALL_SEND_CID 		2
-+#define MMC_CMD_SET_RCA			3
-+#define MMC_CMD_SELECT_CARD		7
-+#define MMC_CMD_SEND_CSD 		9
-+#define MMC_CMD_SEND_CID 		10
-+#define MMC_CMD_SEND_STATUS		13
-+#define MMC_CMD_SET_BLOCKLEN		16
-+#define MMC_CMD_READ_BLOCK		17
-+#define MMC_CMD_RD_BLK_MULTI		18
-+#define MMC_CMD_WRITE_BLOCK		24
-+
-+#define MMC_MAX_BLOCK_SIZE		512
-+
-+#define MMC_R1_IDLE_STATE		0x01
-+#define MMC_R1_ERASE_STATE		0x02
-+#define MMC_R1_ILLEGAL_CMD		0x04
-+#define MMC_R1_COM_CRC_ERR		0x08
-+#define MMC_R1_ERASE_SEQ_ERR		0x01
-+#define MMC_R1_ADDR_ERR			0x02
-+#define MMC_R1_PARAM_ERR		0x04
-+
-+#define MMC_R1B_WP_ERASE_SKIP		0x0002
-+#define MMC_R1B_ERR			0x0004
-+#define MMC_R1B_CC_ERR			0x0008
-+#define MMC_R1B_CARD_ECC_ERR		0x0010
-+#define MMC_R1B_WP_VIOLATION		0x0020
-+#define MMC_R1B_ERASE_PARAM		0x0040
-+#define MMC_R1B_OOR			0x0080
-+#define MMC_R1B_IDLE_STATE		0x0100
-+#define MMC_R1B_ERASE_RESET		0x0200
-+#define MMC_R1B_ILLEGAL_CMD		0x0400
-+#define MMC_R1B_COM_CRC_ERR		0x0800
-+#define MMC_R1B_ERASE_SEQ_ERR		0x1000
-+#define MMC_R1B_ADDR_ERR		0x2000
-+#define MMC_R1B_PARAM_ERR		0x4000
-+
-+typedef struct mmc_cid
-+{
-+	/* FIXME: BYTE_ORDER */
-+	uchar	year:4,
-+		month:4;
-+	uchar	sn[3];
-+	uchar	fwrev:4,
-+		hwrev:4;
-+	uchar	name[6];
-+	uchar	id[3];
-+} mmc_cid_t;
-+
-+typedef struct mmc_csd
-+{
-+	uchar	ecc:2,
-+		file_format:2,
-+		tmp_write_protect:1,
-+		perm_write_protect:1,
-+		copy:1,
-+		file_format_grp:1;
-+	uint64_t content_prot_app:1,
-+		rsvd3:4,
-+		write_bl_partial:1,
-+		write_bl_len:4,
-+		r2w_factor:3,
-+		default_ecc:2,
-+		wp_grp_enable:1,
-+		wp_grp_size:5,
-+		erase_grp_mult:5,
-+		erase_grp_size:5,
-+		c_size_mult1:3,
-+		vdd_w_curr_max:3,
-+		vdd_w_curr_min:3,
-+		vdd_r_curr_max:3,
-+		vdd_r_curr_min:3,
-+		c_size:12,
-+		rsvd2:2,
-+		dsr_imp:1,
-+		read_blk_misalign:1,
-+		write_blk_misalign:1,
-+		read_bl_partial:1;
-+
-+	ushort	read_bl_len:4,
-+		ccc:12;
-+	uchar	tran_speed;
-+	uchar	nsac;
-+	uchar	taac;
-+	uchar	rsvd1:2,
-+  		spec_vers:4,
-+		csd_structure:2;
-+} mmc_csd_t;
-+
-+
-+#endif /* __MMC_PXA_P_H__ */
-Index: u-boot/include/asm-arm/arch-s3c24x0/regs-sdi.h
-===================================================================
---- /dev/null
-+++ u-boot/include/asm-arm/arch-s3c24x0/regs-sdi.h
-@@ -0,0 +1,110 @@
-+/* linux/include/asm/arch-s3c2410/regs-sdi.h
-+ *
-+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
-+ *		      http://www.simtec.co.uk/products/SWLINUX/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * S3C2410 MMC/SDIO register definitions
-+ *
-+ *  Changelog:
-+ *    18-Aug-2004 Ben Dooks      Created initial file
-+ *    29-Nov-2004 Koen Martens   Added some missing defines, fixed duplicates
-+ *    29-Nov-2004 Ben Dooks	 Updated Koen's patch
-+*/
-+
-+#ifndef __ASM_ARM_REGS_SDI
-+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-+
-+#define S3C2440_SDICON_SDRESET        (1<<8)
-+#define S3C2440_SDICON_MMCCLOCK       (1<<5)
-+#define S3C2410_SDICON_BYTEORDER      (1<<4)
-+#define S3C2410_SDICON_SDIOIRQ        (1<<3)
-+#define S3C2410_SDICON_RWAITEN        (1<<2)
-+#define S3C2410_SDICON_FIFORESET      (1<<1)
-+#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
-+
-+#define S3C2410_SDICMDCON_ABORT       (1<<12)
-+#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
-+#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
-+#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
-+#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
-+#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
-+#define S3C2410_SDICMDCON_INDEX       (0x3f)
-+
-+#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
-+#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
-+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-+#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
-+#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
-+#define S3C2410_SDICMDSTAT_INDEX      (0xff)
-+
-+#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
-+#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
-+#define S3C2440_SDIDCON_DS_WORD       (2<<22)
-+#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
-+#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
-+#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
-+#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
-+#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
-+#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
-+#define S3C2410_SDIDCON_DMAEN         (1<<15)
-+#define S3C2410_SDIDCON_STOP          (1<<14)
-+#define S3C2440_SDIDCON_DATSTART      (1<<14)
-+#define S3C2410_SDIDCON_DATMODE	      (3<<12)
-+#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
-+
-+/* constants for S3C2410_SDIDCON_DATMODE */
-+#define S3C2410_SDIDCON_XFER_READY    (0<<12)
-+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-+#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
-+#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
-+
-+#define S3C2410_SDIDCNT_BLKNUM_MASK   (0xFFF)
-+#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
-+
-+#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
-+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-+#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
-+#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
-+#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
-+#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
-+#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
-+#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
-+#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
-+#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
-+#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
-+
-+#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
-+#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
-+#define S3C2410_SDIFSTA_TFDET          (1<<13)
-+#define S3C2410_SDIFSTA_RFDET          (1<<12)
-+#define S3C2410_SDIFSTA_TFHALF         (1<<11)
-+#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
-+#define S3C2410_SDIFSTA_RFLAST         (1<<9)
-+#define S3C2410_SDIFSTA_RFFULL         (1<<8)
-+#define S3C2410_SDIFSTA_RFHALF         (1<<7)
-+#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
-+
-+#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
-+#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
-+#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
-+#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
-+#define S3C2410_SDIIMSK_READWAIT       (1<<13)
-+#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
-+#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
-+#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
-+#define S3C2410_SDIIMSK_DATACRC        (1<<9)
-+#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
-+#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
-+#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
-+#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
-+#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
-+#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
-+#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
-+#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
-+#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
-+
-+#endif /* __ASM_ARM_REGS_SDI */
-Index: u-boot/include/s3c24x0.h
-===================================================================
---- u-boot.orig/include/s3c24x0.h
-+++ u-boot/include/s3c24x0.h
-@@ -637,13 +637,7 @@
- 	S3C24X0_REG32	SDIDCNT;
- 	S3C24X0_REG32	SDIDSTA;
- 	S3C24X0_REG32	SDIFSTA;
--#ifdef __BIG_ENDIAN
--	S3C24X0_REG8	res[3];
--	S3C24X0_REG8	SDIDAT;
--#else
--	S3C24X0_REG8	SDIDAT;
--	S3C24X0_REG8	res[3];
--#endif
-+	S3C24X0_REG32	SDIDAT;
- 	S3C24X0_REG32	SDIIMSK;
- } /*__attribute__((__packed__))*/ S3C2410_SDI;
- 
-@@ -1123,11 +1117,7 @@
- #define rSDIDatCnt		(*(volatile unsigned *)0x5A000030)
- #define rSDIDatSta		(*(volatile unsigned *)0x5A000034)
- #define rSDIFSTA		(*(volatile unsigned *)0x5A000038)
--#ifdef __BIG_ENDIAN
--#define rSDIDAT			(*(volatile unsigned char *)0x5A00003F)
--#else
--#define rSDIDAT			(*(volatile unsigned char *)0x5A00003C)
--#endif
-+#define rSDIDAT			(*(volatile unsigned *)0x5A00003C)
- #define rSDIIntMsk		(*(volatile unsigned *)0x5A000040)
- 
- #endif
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-nand.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-nand.patch
deleted file mode 100644
index 9c10edc958..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-nand.patch
+++ /dev/null
@@ -1,525 +0,0 @@
-This patch adds NAND (including boot-from-NAND via steppingstone) support to
-the S3C2410 SoC code in u-boot
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/cpu/arm920t/s3c24x0/Makefile
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/Makefile	2007-02-28 03:47:44.000000000 +0100
-+++ u-boot/cpu/arm920t/s3c24x0/Makefile	2007-03-01 14:29:32.000000000 +0100
-@@ -26,7 +26,7 @@
- LIB	= $(obj)lib$(SOC).a
- 
- COBJS	= i2c.o interrupts.o serial.o speed.o \
--	  usb_ohci.o
-+	  usb_ohci.o nand_read.o nand.o
- 
- SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
- OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-Index: u-boot/cpu/arm920t/s3c24x0/nand.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot/cpu/arm920t/s3c24x0/nand.c	2007-03-01 14:30:27.000000000 +0100
-@@ -0,0 +1,225 @@
-+/*
-+ * (C) Copyright 2006 Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if 0
-+#define DEBUGN	printf
-+#else
-+#define DEBUGN(x, args ...) {}
-+#endif
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-+#if !defined(CFG_NAND_LEGACY)
-+
-+#include <nand.h>
-+#include <s3c2410.h>
-+
-+#define __REGb(x)	(*(volatile unsigned char *)(x))
-+#define __REGi(x)	(*(volatile unsigned int *)(x))
-+
-+#define	NF_BASE		0x4e000000
-+#define	NFCONF		__REGi(NF_BASE + 0x0)
-+#define	NFCMD		__REGb(NF_BASE + 0x4)
-+#define	NFADDR		__REGb(NF_BASE + 0x8)
-+#define	NFDATA		__REGb(NF_BASE + 0xc)
-+#define	NFSTAT		__REGb(NF_BASE + 0x10)
-+#define NFECC0		__REGb(NF_BASE + 0x14)
-+#define NFECC1		__REGb(NF_BASE + 0x15)
-+#define NFECC2		__REGb(NF_BASE + 0x16)
-+
-+#define S3C2410_NFCONF_EN          (1<<15)
-+#define S3C2410_NFCONF_512BYTE     (1<<14)
-+#define S3C2410_NFCONF_4STEP       (1<<13)
-+#define S3C2410_NFCONF_INITECC     (1<<12)
-+#define S3C2410_NFCONF_nFCE        (1<<11)
-+#define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
-+#define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
-+#define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
-+
-+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+	struct nand_chip *chip = mtd->priv;
-+
-+	DEBUGN("hwcontrol(): 0x%02x: ", cmd);
-+
-+	switch (cmd) {
-+	case NAND_CTL_SETNCE:
-+		NFCONF &= ~S3C2410_NFCONF_nFCE;
-+		DEBUGN("NFCONF=0x%08x\n", NFCONF);
-+		break;
-+	case NAND_CTL_CLRNCE:
-+		NFCONF |= S3C2410_NFCONF_nFCE;
-+		DEBUGN("NFCONF=0x%08x\n", NFCONF);
-+		break;
-+	case NAND_CTL_SETALE:
-+		chip->IO_ADDR_W = NF_BASE + 0x8;
-+		DEBUGN("SETALE\n");
-+		break;
-+	case NAND_CTL_SETCLE:
-+		chip->IO_ADDR_W = NF_BASE + 0x4;
-+		DEBUGN("SETCLE\n");
-+		break;
-+	default:
-+		chip->IO_ADDR_W = NF_BASE + 0xc;
-+		break;
-+	}
-+	return;
-+}
-+
-+static int s3c2410_dev_ready(struct mtd_info *mtd)
-+{
-+	DEBUGN("dev_ready\n");
-+	return (NFSTAT & 0x01);
-+}
-+
-+static void s3c2410_cmdfunc(struct mtd_info *mtd, unsigned cmd,
-+			    int column, int page_addr)
-+{
-+	DEBUGN("cmdfunc(): 0x%02x, col=%d, page=%d\n", cmd, column, page_addr);
-+
-+	switch (cmd) {
-+	case NAND_CMD_READ0:
-+	case NAND_CMD_READ1:
-+	case NAND_CMD_READOOB:
-+		NFCMD = cmd;
-+		NFADDR = column & 0xff;
-+		NFADDR = page_addr & 0xff;
-+		NFADDR = (page_addr >> 8) & 0xff;
-+		NFADDR = (page_addr >> 16) & 0xff;
-+		break;
-+	case NAND_CMD_READID:
-+		NFCMD = cmd;
-+		NFADDR = 0;
-+		break;
-+	case NAND_CMD_PAGEPROG:
-+		NFCMD = cmd;
-+		printf("PAGEPROG not implemented\n");
-+		break;
-+	case NAND_CMD_ERASE1:
-+		NFCMD = cmd;
-+		NFADDR = page_addr & 0xff;
-+		NFADDR = (page_addr >> 8) & 0xff;
-+		NFADDR = (page_addr >> 16) & 0xff;
-+		break;
-+	case NAND_CMD_ERASE2:
-+		NFCMD = cmd;
-+		break;
-+	case NAND_CMD_SEQIN:
-+		printf("SEQIN not implemented\n");
-+		break;
-+	case NAND_CMD_STATUS:
-+		NFCMD = cmd;
-+		break;
-+	case NAND_CMD_RESET:
-+		NFCMD = cmd;
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	while (!s3c2410_dev_ready(mtd));
-+}
-+
-+#ifdef CONFIG_S3C2410_NAND_HWECC
-+void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+	DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd ,mode);
-+	NFCONF |= S3C2410_NFCONF_INITECC;
-+}
-+
-+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
-+{
-+	ecc_code[0] = NFECC0;
-+	ecc_code[1] = NFECC1;
-+	ecc_code[2] = NFECC2;
-+	DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
-+
-+	return 0;
-+}
-+
-+int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
-+{
-+	if (read_ecc[0] == calc_ecc[0] &&
-+	    read_ecc[1] == calc_ecc[1] &&
-+	    read_ecc[2] == calc_ecc[2])
-+	    	return 0;
-+
-+	printf("s3c2410_nand_correct_data: not implemented\n");
-+	return -1;
-+}
-+#endif
-+
-+int board_nand_init(struct nand_chip *nand)
-+{
-+	u_int32_t cfg;
-+	u_int8_t tacls, twrph0, twrph1;
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+
-+	DEBUGN("board_nand_init()\n");
-+
-+	clk_power->CLKCON |= (1 << 4);
-+
-+	/* initialize hardware */
-+	twrph0 = 3; twrph1 = 0; tacls = 0;
-+
-+	cfg = S3C2410_NFCONF_EN;
-+	cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
-+	cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
-+	cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
-+
-+	NFCONF = cfg;
-+	//NFCONF = 0xf842;
-+
-+	/* initialize nand_chip data structure */
-+	nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
-+
-+	/* read_buf and write_buf are default */
-+	/* read_byte and write_byte are default */
-+
-+	/* hwcontrol always must be implemented */
-+	nand->hwcontrol = s3c2410_hwcontrol;
-+
-+	nand->dev_ready = s3c2410_dev_ready;
-+
-+#ifdef CONFIG_S3C2410_NAND_HWECC
-+	nand->enable_hwecc = s3c2410_nand_enable_hwecc;
-+	nand->calculate_ecc = s3c2410_nand_calculate_ecc;
-+	nand->correct_data = s3c2410_nand_correct_data;
-+	nand->eccmode = NAND_ECC_HW3_512;
-+#else
-+	nand->eccmode = NAND_ECC_SOFT;
-+#endif
-+
-+#ifdef CONFIG_S3C2410_NAND_BBT
-+	nand->options = NAND_USE_FLASH_BBT;
-+#else
-+	nand->options = 0;
-+#endif
-+
-+	DEBUGN("end of nand_init\n");
-+
-+	return 0;
-+}
-+
-+#else
-+ #error "U-Boot legacy NAND support not available for S3C2410"
-+#endif
-+#endif
-Index: u-boot/cpu/arm920t/s3c24x0/nand_read.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot/cpu/arm920t/s3c24x0/nand_read.c	2007-02-28 03:51:24.000000000 +0100
-@@ -0,0 +1,98 @@
-+/*
-+ * nand_read.c: Simple NAND read functions for booting from NAND
-+ *
-+ * This is used by cpu/arm920/start.S assembler code,
-+ * and the board-specific linker script must make sure this
-+ * file is linked within the first 4kB of NAND flash.
-+ *
-+ * Taken from GPLv2 licensed vivi bootloader,
-+ * Copyright (C) 2002 MIZI Research, Inc.
-+ *
-+ * Author: Hwang, Chideok <hwang@mizi.com>
-+ * Date  : $Date: 2004/02/04 10:37:37 $
-+ *
-+ * u-boot integration and bad-block skipping (C) 2006 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ */
-+
-+#include <common.h>
-+
-+#ifdef CONFIG_S3C2410_NAND_BOOT
-+
-+#define __REGb(x)	(*(volatile unsigned char *)(x))
-+#define __REGi(x)	(*(volatile unsigned int *)(x))
-+#define NF_BASE		0x4e000000
-+#define NFCONF		__REGi(NF_BASE + 0x0)
-+#define NFCMD		__REGb(NF_BASE + 0x4)
-+#define NFADDR		__REGb(NF_BASE + 0x8)
-+#define NFDATA		__REGb(NF_BASE + 0xc)
-+#define NFSTAT		__REGb(NF_BASE + 0x10)
-+
-+#define BUSY 1
-+inline void wait_idle(void)
-+{
-+	int i;
-+
-+	while (!(NFSTAT & BUSY))
-+		for (i=0; i<10; i++);
-+}
-+
-+#define NAND_SECTOR_SIZE	512
-+#define NAND_BLOCK_MASK		(NAND_SECTOR_SIZE - 1)
-+#define NAND_PAGE_SIZE		0x4000
-+
-+/* low level nand read function */
-+int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size)
-+{
-+	int i, j;
-+
-+	if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK))
-+		return -1;	/* invalid alignment */
-+
-+	/* chip Enable */
-+	NFCONF &= ~0x800;
-+	for (i=0; i<10; i++);
-+
-+	for (i=start_addr; i < (start_addr + size);) {
-+#ifdef CONFIG_S3C2410_NAND_SKIP_BAD
-+		if (start_addr % NAND_PAGE_SIZE == 0) {
-+			unsigned char data;
-+			NFCMD = 0x50;
-+			NFADDR = 517&0xf;
-+			NFADDR = (i >> 9) & 0xff;
-+			NFADDR = (i >> 17) & 0xff;
-+			NFADDR = (i >> 25) & 0xff;
-+			wait_idle();
-+			data = (NFDATA & 0xff);
-+			if (data != 0xff) {
-+				/* Bad block */
-+				i += NAND_PAGE_SIZE;
-+				size += NAND_PAGE_SIZE;
-+				continue;
-+			}
-+		}
-+#endif
-+		/* READ0 */
-+		NFCMD = 0;
-+
-+		/* Write Address */
-+		NFADDR = i & 0xff;
-+		NFADDR = (i >> 9) & 0xff;
-+		NFADDR = (i >> 17) & 0xff;
-+		NFADDR = (i >> 25) & 0xff;
-+
-+		wait_idle();
-+
-+		for (j=0; j < NAND_SECTOR_SIZE; j++, i++) {
-+			*buf = (NFDATA & 0xff);
-+			buf++;
-+		}
-+	}
-+
-+	/* chip Disable */
-+	NFCONF |= 0x800;	/* chip disable */
-+
-+	return 0;
-+}
-+
-+#endif /* CONFIG_S3C2410_NAND_BOOT */
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S	2007-02-28 03:47:44.000000000 +0100
-+++ u-boot/cpu/arm920t/start.S	2007-03-01 14:29:22.000000000 +0100
-@@ -5,6 +5,10 @@
-  *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
-  *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
-  *
-+ * S3C2410 NAND portions
-+ *  Copyright (c) 2001  MIZI Research, Inc.
-+ *  Copyright (c) 2006  Openmoko, Inc. (Harald Welte <laforge@openmmoko.org>
-+ *
-  * See file CREDITS for list of people who contributed to this
-  * project.
-  *
-@@ -27,6 +31,7 @@
- 
- #include <config.h>
- #include <version.h>
-+#include <s3c2410.h>
- 
- 
- /*
-@@ -161,6 +166,7 @@
- #endif
- 
- #ifndef CONFIG_SKIP_RELOCATE_UBOOT
-+#ifndef CONFIG_S3C2410_NAND_BOOT
- relocate:				/* relocate U-Boot to RAM	    */
- 	adr	r0, _start		/* r0 <- current position of code   */
- 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-@@ -177,6 +183,93 @@
- 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
- 	cmp	r0, r2			/* until source end addreee [r2]    */
- 	ble	copy_loop
-+#else /* NAND_BOOT */
-+relocate:
-+copy_myself:
-+	/* mov	r10, lr */
-+
-+	@ reset NAND
-+	mov	r1, #S3C2410_NAND_BASE
-+	ldr	r2, =0xf842		@ initial value enable tacls=3,rph0=6,rph1=0
-+	str	r2, [r1, #oNFCONF]
-+	ldr	r2, [r1, #oNFCONF]
-+	bic	r2, r2, #0x800		@ enable chip
-+	str	r2, [r1, #oNFCONF]
-+	mov	r2, #0xff		@ RESET command
-+	strb	r2, [r1, #oNFCMD]
-+	mov	r3, #0			@ wait
-+1:	add	r3, r3, #0x1
-+	cmp	r3, #0xa
-+	blt	1b
-+2:	ldr	r2, [r1, #oNFSTAT]	@ wait ready
-+	tst	r2, #0x1
-+	beq	2b
-+	ldr	r2, [r1, #oNFCONF]
-+	orr	r2, r2, #0x800		@ disable chip
-+	str	r2, [r1, #oNFCONF]
-+
-+#if 0
-+	@ get ready to call C functions (for nand_read())
-+	ldr	sp, DW_STACK_START	@ setup stack pointer
-+	mov	fp, #0			@ no previous frame, so fp=0
-+#else
-+	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-+	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-+	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
-+#ifdef CONFIG_USE_IRQ
-+	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-+#endif
-+	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-+#endif
-+
-+	@ copy u-boot to RAM
-+	ldr	r0, _TEXT_BASE
-+	mov     r1, #0x0
-+	mov	r2, #CFG_UBOOT_SIZE
-+	bl	nand_read_ll
-+
-+	tst	r0, #0x0
-+	beq	ok_nand_read
-+#ifdef CONFIG_DEBUG_LL
-+bad_nand_read:
-+	ldr	r0, STR_FAIL
-+	ldr	r1, SerBase
-+	bl	PrintWord
-+1:	b	1b		@ infinite loop
-+#endif
-+
-+ok_nand_read:
-+#ifdef CONFIG_DEBUG_LL
-+	ldr	r0, STR_OK
-+	ldr	r1, SerBase
-+	bl	PrintWord
-+#endif
-+
-+	@ verify
-+	mov	r0, #0
-+	@ldr	r1, =0x33f00000
-+	ldr	r1, _TEXT_BASE
-+	mov	r2, #0x400	@ 4 bytes * 1024 = 4K-bytes
-+go_next:
-+	ldr	r3, [r0], #4
-+	ldr	r4, [r1], #4
-+	teq	r3, r4
-+	bne	notmatch
-+	subs	r2, r2, #4
-+	beq	done_nand_read
-+	bne	go_next
-+notmatch:
-+#ifdef CONFIG_DEBUG_LL
-+	sub	r0, r0, #4
-+	ldr	r1, SerBase
-+	bl	PrintHexWord
-+	ldr	r0, STR_FAIL
-+	ldr	r1, SerBase
-+	bl	PrintWord
-+#endif
-+1:	b	1b
-+done_nand_read:
-+#endif /* NAND_BOOT */
- #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
- 
- 	/* Set up the stack						    */
-Index: u-boot/include/s3c2410.h
-===================================================================
---- u-boot.orig/include/s3c2410.h	2007-02-28 03:51:24.000000000 +0100
-+++ u-boot/include/s3c2410.h	2007-03-01 14:29:22.000000000 +0100
-@@ -38,12 +38,6 @@
- #define S3C2410_ECCSIZE		512
- #define S3C2410_ECCBYTES	3
- 
--typedef enum {
--	S3C24X0_UART0,
--	S3C24X0_UART1,
--	S3C24X0_UART2
--} S3C24X0_UARTS_NR;
--
- /* S3C2410 device base addresses */
- #define S3C24X0_MEMCTL_BASE		0x48000000
- #define S3C24X0_USB_HOST_BASE		0x49000000
-@@ -65,9 +59,23 @@
- #define S3C2410_SDI_BASE		0x5A000000
- 
- 
-+#define oNFCONF			0x00
-+#define oNFCMD			0x04
-+#define oNFADDR			0x08
-+#define oNFDATA			0x0C
-+#define oNFSTAT			0x10
-+#define oNFECC			0x14
-+
-+#ifndef __ASSEMBLER__
-+
- /* include common stuff */
- #include <s3c24x0.h>
- 
-+typedef enum {
-+	S3C24X0_UART0,
-+	S3C24X0_UART1,
-+	S3C24X0_UART2
-+} S3C24X0_UARTS_NR;
- 
- static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void)
- {
-@@ -142,6 +150,7 @@
- 	return (S3C2410_SDI * const)S3C2410_SDI_BASE;
- }
- 
-+#endif
- 
- /* ISR */
- #define pISR_RESET		(*(unsigned *)(_ISR_STARTADDRESS+0x0))
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-norelocate_irqvec_cpy.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-norelocate_irqvec_cpy.patch
deleted file mode 100644
index 0d5a49771d..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-norelocate_irqvec_cpy.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-If we've somehow magically make u-boot end up in RAM (JTAG, ...), then that RAM
-is mapped to 0x30000000 and not 0, so we need to copy the interrupt vectors, etc. 
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -332,7 +332,23 @@ done_nand_read:
- 	strb	r1, [r0]
- #endif /* CONFIG_S3C2410_NAND_BOOT */
- done_relocate:
--#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
-+
-+#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C2410)
-+	/* In the case of the S3C2410, if we've somehow magically (JTAG, ...)
-+	   ended up in RAM, then that ram is mapped to 0x30000000 and not 0.
-+	   So we need to copy the interrupt vectors, etc.  */
-+
-+	mov	r0, #0
-+	ldr	r1, _TEXT_BASE
-+	mov	r2, #0x40
-+irqvec_cpy_next:
-+	ldr	r3, [r1], #4
-+	str	r3, [r0], #4
-+	subs	r2, r2, #4
-+	bne	irqvec_cpy_next
-+#endif /* CONFIG_USE_IRQ */
-+
-+#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */
- 
- 	/* Set up the stack						    */
- stack_setup:
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-warnings-fix.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-warnings-fix.patch
deleted file mode 100644
index 8cc442a865..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410-warnings-fix.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-Index: u-boot/include/s3c2410.h
-===================================================================
---- u-boot.orig/include/s3c2410.h	2007-02-16 23:53:20.000000000 +0100
-+++ u-boot/include/s3c2410.h	2007-02-16 23:53:21.000000000 +0100
-@@ -69,75 +69,75 @@
- #include <s3c24x0.h>
- 
- 
--static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void)
-+static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void)
- {
- 	return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE;
- }
--static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void)
-+static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void)
- {
- 	return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE;
- }
--static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void)
-+static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void)
- {
- 	return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE;
- }
--static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void)
-+static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void)
- {
- 	return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE;
- }
--static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void)
-+static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void)
- {
- 	return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE;
- }
--static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void)
-+static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void)
- {
- 	return (S3C24X0_LCD * const)S3C24X0_LCD_BASE;
- }
--static inline S3C2410_NAND * const S3C2410_GetBase_NAND(void)
-+static inline S3C2410_NAND * S3C2410_GetBase_NAND(void)
- {
- 	return (S3C2410_NAND * const)S3C2410_NAND_BASE;
- }
--static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
-+static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
- {
- 	return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000));
- }
--static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void)
-+static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void)
- {
- 	return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE;
- }
--static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void)
-+static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void)
- {
- 	return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE;
- }
--static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void)
-+static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void)
- {
- 	return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE;
- }
--static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void)
-+static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void)
- {
- 	return (S3C24X0_I2C * const)S3C24X0_I2C_BASE;
- }
--static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void)
-+static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void)
- {
- 	return (S3C24X0_I2S * const)S3C24X0_I2S_BASE;
- }
--static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void)
-+static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void)
- {
- 	return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE;
- }
--static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void)
-+static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void)
- {
- 	return (S3C24X0_RTC * const)S3C24X0_RTC_BASE;
- }
--static inline S3C2410_ADC * const S3C2410_GetBase_ADC(void)
-+static inline S3C2410_ADC * S3C2410_GetBase_ADC(void)
- {
- 	return (S3C2410_ADC * const)S3C2410_ADC_BASE;
- }
--static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void)
-+static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void)
- {
- 	return (S3C24X0_SPI * const)S3C24X0_SPI_BASE;
- }
--static inline S3C2410_SDI * const S3C2410_GetBase_SDI(void)
-+static inline S3C2410_SDI * S3C2410_GetBase_SDI(void)
- {
- 	return (S3C2410_SDI * const)S3C2410_SDI_BASE;
- }
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410_fb.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410_fb.patch
deleted file mode 100644
index 9ed81b9cb6..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410_fb.patch
+++ /dev/null
@@ -1,215 +0,0 @@
-Index: u-boot/drivers/Makefile
-===================================================================
---- u-boot.orig/drivers/Makefile
-+++ u-boot/drivers/Makefile
-@@ -52,7 +52,7 @@
- 	  ks8695eth.o \
- 	  pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o	\
- 	  rpx_pcmcia.o \
--	  fsl_i2c.o
-+	  fsl_i2c.o s3c2410_fb.o
- 
- SRCS	:= $(COBJS:.o=.c)
- OBJS	:= $(addprefix $(obj),$(COBJS))
-Index: u-boot/drivers/s3c2410_fb.c
-===================================================================
---- /dev/null
-+++ u-boot/drivers/s3c2410_fb.c
-@@ -0,0 +1,166 @@
-+/*
-+ * (C) Copyright 2006 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if defined(CONFIG_VIDEO_S3C2410)
-+
-+#include <video_fb.h>
-+#include "videomodes.h"
-+#include <s3c2410.h>
-+/*
-+ * Export Graphic Device
-+ */
-+GraphicDevice smi;
-+
-+#define VIDEO_MEM_SIZE	0x200000	/* 480x640x16bit = 614400 bytes */
-+
-+extern void board_video_init(GraphicDevice *pGD);
-+
-+/*******************************************************************************
-+ *
-+ * Init video chip with common Linux graphic modes (lilo)
-+ */
-+void *video_hw_init (void)
-+{
-+	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-+	GraphicDevice *pGD = (GraphicDevice *)&smi;
-+	int videomode;
-+	unsigned long t1, hsynch, vsynch;
-+	char *penv;
-+	int tmp, i, bits_per_pixel;
-+	struct ctfb_res_modes *res_mode;
-+	struct ctfb_res_modes var_mode;
-+	unsigned char videoout;
-+
-+	/* Search for video chip */
-+	printf("Video: ");
-+
-+	tmp = 0;
-+
-+	videomode = CFG_DEFAULT_VIDEO_MODE;
-+	/* get video mode via environment */
-+	if ((penv = getenv ("videomode")) != NULL) {
-+		/* deceide if it is a string */
-+		if (penv[0] <= '9') {
-+			videomode = (int) simple_strtoul (penv, NULL, 16);
-+			tmp = 1;
-+		}
-+	} else {
-+		tmp = 1;
-+	}
-+	if (tmp) {
-+		/* parameter are vesa modes */
-+		/* search params */
-+		for (i = 0; i < VESA_MODES_COUNT; i++) {
-+			if (vesa_modes[i].vesanr == videomode)
-+				break;
-+		}
-+		if (i == VESA_MODES_COUNT) {
-+			printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
-+			i = 0;
-+		}
-+		res_mode =
-+			(struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].
-+								 resindex];
-+		bits_per_pixel = vesa_modes[i].bits_per_pixel;
-+	} else {
-+
-+		res_mode = (struct ctfb_res_modes *) &var_mode;
-+		bits_per_pixel = video_get_params (res_mode, penv);
-+	}
-+
-+	/* calculate hsynch and vsynch freq (info only) */
-+	t1 = (res_mode->left_margin + res_mode->xres +
-+	      res_mode->right_margin + res_mode->hsync_len) / 8;
-+	t1 *= 8;
-+	t1 *= res_mode->pixclock;
-+	t1 /= 1000;
-+	hsynch = 1000000000L / t1;
-+	t1 *=
-+		(res_mode->upper_margin + res_mode->yres +
-+		 res_mode->lower_margin + res_mode->vsync_len);
-+	t1 /= 1000;
-+	vsynch = 1000000000L / t1;
-+
-+	/* fill in Graphic device struct */
-+	sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
-+		 res_mode->yres, bits_per_pixel, (hsynch / 1000),
-+		 (vsynch / 1000));
-+	printf ("%s\n", pGD->modeIdent);
-+	pGD->winSizeX = res_mode->xres;
-+	pGD->winSizeY = res_mode->yres;
-+	pGD->plnSizeX = res_mode->xres;
-+	pGD->plnSizeY = res_mode->yres;
-+	switch (bits_per_pixel) {
-+	case 8:
-+		pGD->gdfBytesPP = 1;
-+		pGD->gdfIndex = GDF__8BIT_INDEX;
-+		break;
-+	case 15:
-+		pGD->gdfBytesPP = 2;
-+		pGD->gdfIndex = GDF_15BIT_555RGB;
-+		break;
-+	case 16:
-+		pGD->gdfBytesPP = 2;
-+		pGD->gdfIndex = GDF_16BIT_565RGB;
-+		break;
-+	case 24:
-+		pGD->gdfBytesPP = 3;
-+		pGD->gdfIndex = GDF_24BIT_888RGB;
-+		break;
-+	}
-+
-+	/* statically configure settings */
-+	pGD->winSizeX = pGD->plnSizeX = 480;
-+	pGD->winSizeY = pGD->plnSizeY = 640;
-+	pGD->gdfBytesPP = 2;
-+	pGD->gdfIndex = GDF_16BIT_565RGB;
-+
-+	pGD->frameAdrs = LCD_VIDEO_ADDR;
-+	pGD->memSize = VIDEO_MEM_SIZE;
-+
-+	board_video_init(pGD);
-+
-+	lcd->LCDSADDR1 = pGD->frameAdrs >> 1;
-+
-+	/* This marks the end of the frame buffer. */
-+	lcd->LCDSADDR2 = (lcd->LCDSADDR1&0x1fffff) + (pGD->winSizeX+0) * pGD->winSizeY;
-+	lcd->LCDSADDR3 = pGD->winSizeX;
-+
-+	/* Clear video memory */
-+	memset(pGD->frameAdrs, 0, pGD->memSize);
-+
-+	/* Enable  Display  */
-+	lcd->LCDCON1 |= 0x01;	/* ENVID = 1 */
-+
-+	return ((void*)&smi);
-+}
-+
-+void
-+video_set_lut (unsigned int index,	/* color number */
-+	       unsigned char r,	/* red */
-+	       unsigned char g,	/* green */
-+	       unsigned char b	/* blue */
-+    )
-+{
-+}
-+
-+#endif /* CONFIG_VIDEO_S3C2410 */
-Index: u-boot/drivers/cfb_console.c
-===================================================================
---- u-boot.orig/drivers/cfb_console.c
-+++ u-boot/drivers/cfb_console.c
-@@ -141,6 +141,14 @@
- #endif
- 
- /*****************************************************************************/
-+/* Defines for the S3C2410 driver					     */
-+/*****************************************************************************/
-+#ifdef CONFIG_VIDEO_S3C2410
-+/* it actually is little-endian, but the host CPU, too ! */
-+//#define VIDEO_FB_LITTLE_ENDIAN
-+#endif
-+
-+/*****************************************************************************/
- /* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc	     */
- /*****************************************************************************/
- #include <video_fb.h>
-@@ -307,6 +315,11 @@
- #define SHORTSWAP32(x)	 (x)
- #endif
- 
-+#ifdef CONFIG_VIDEO_S3C2410
-+#undef SHORTSWAP32
-+#define	SHORTSWAP32(x)	((((x) & 0xffff) << 16) | (((x) >> 16) & 0xffff))
-+#endif
-+
- #if defined(DEBUG) || defined(DEBUG_CFB_CONSOLE)
- #define PRINTD(x)	  printf(x)
- #else
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410_udc.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410_udc.patch
deleted file mode 100644
index 8dadbbb7de..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2410_udc.patch
+++ /dev/null
@@ -1,1263 +0,0 @@
-USB Device Controller Driver for Samsung S3C2410 SoC
-
-Index: u-boot/drivers/Makefile
-===================================================================
---- u-boot.orig/drivers/Makefile
-+++ u-boot/drivers/Makefile
-@@ -47,7 +47,7 @@
- 	  status_led.o sym53c8xx.o systemace.o ahci.o \
- 	  ti_pci1410a.o tigon3.o tsec.o \
- 	  tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
--	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
-+	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \
- 	  videomodes.o w83c553f.o \
- 	  ks8695eth.o \
- 	  pcf50606.o \
-Index: u-boot/drivers/usbdcore_s3c2410.c
-===================================================================
---- /dev/null
-+++ u-boot/drivers/usbdcore_s3c2410.c
-@@ -0,0 +1,730 @@
-+/* S3C2410 USB Device Controller Driver for u-boot
-+ *
-+ * (C) Copyright 2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on Linux' s3c2410_udc.c, which is
-+ * Copyright (C) 2004-2006 Herbert Pötzl - Arnaud Patard
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
-+ *
-+ */
-+
-+#include <config.h>
-+
-+#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE)
-+
-+#include <common.h>
-+
-+/* we can't use the regular debug macros since the console might be
-+ * set to usbtty, which would cause deadlocks! */
-+#ifdef	DEBUG
-+#undef debug
-+#undef debugX
-+#define debug(fmt,args...)	serial_printf (fmt ,##args)
-+#define debugX(level,fmt,args...) if (DEBUG>=level) serial_printf(fmt,##args)
-+#endif
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#include <asm/io.h>
-+#include <s3c2410.h>
-+
-+#include "usbdcore.h"
-+#include "usbdcore_s3c2410.h"
-+#include "usbdcore_ep0.h"
-+#include <usb_cdc_acm.h>
-+
-+enum ep0_state {
-+        EP0_IDLE,
-+        EP0_IN_DATA_PHASE,
-+        EP0_OUT_DATA_PHASE,
-+        EP0_END_XFER,
-+        EP0_STALL,
-+};
-+
-+static struct urb *ep0_urb = NULL;
-+
-+static struct usb_device_instance *udc_device;	/* Used in interrupt handler */
-+
-+static inline int fifo_count_out(void)
-+{
-+	int tmp;
-+
-+	tmp = inl(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8;
-+	tmp |= inl(S3C2410_UDC_OUT_FIFO_CNT1_REG);
-+
-+	return tmp & 0xffff;
-+}
-+
-+static const unsigned long ep_fifo_reg[S3C2410_UDC_NUM_ENDPOINTS] = {
-+	S3C2410_UDC_EP0_FIFO_REG,
-+	S3C2410_UDC_EP1_FIFO_REG,
-+	S3C2410_UDC_EP2_FIFO_REG,
-+	S3C2410_UDC_EP3_FIFO_REG,
-+	S3C2410_UDC_EP4_FIFO_REG,
-+};
-+
-+static int s3c2410_write_noniso_tx_fifo(struct usb_endpoint_instance *endpoint)
-+{
-+	struct urb *urb = endpoint->tx_urb;
-+	unsigned int last, i;
-+	unsigned int ep = endpoint->endpoint_address & 0x7f;
-+	unsigned long fifo_reg = ep_fifo_reg[ep];
-+
-+	/* WARNING: don't ever put serial debug printf's in non-error codepaths
-+	 * here, it is called from the time critical EP0 codepath ! */
-+
-+	if (!urb || ep >= S3C2410_UDC_NUM_ENDPOINTS) {
-+		serial_printf("no urb or wrong endpoint\n");
-+		return -1;
-+	}
-+
-+	S3C2410_UDC_SETIX(ep);
-+	if ((last = MIN(urb->actual_length - endpoint->sent,
-+		        endpoint->tx_packetSize))) {
-+		u8 *cp = urb->buffer + endpoint->sent;
-+
-+		for (i = 0; i < last; i++)
-+			outb(*(cp+i), fifo_reg);
-+	}
-+	endpoint->last = last;
-+
-+	if (endpoint->sent + last < urb->actual_length) {
-+		/* not all data has been transmitted so far */
-+		return 0;
-+	}
-+
-+	if (last == endpoint->tx_packetSize) {
-+		/* we need to send one more packet (ZLP) */
-+		return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+
-+static void s3c2410_deconfigure_device (void)
-+{
-+	/* FIXME: Implement this */
-+}
-+
-+static void s3c2410_configure_device (struct usb_device_instance *device)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+	S3C24X0_CLOCK_POWER * const cpower = S3C24X0_GetBase_CLOCK_POWER();
-+
-+	/* disable EP0-4 SUBD interrupts ? */
-+	outl(0x00, S3C2410_UDC_USB_INT_EN_REG);
-+
-+	/* UPLL already configured by board-level init code */
-+
-+	/* configure USB pads to device mode */
-+	gpio->MISCCR &= ~(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND1);
-+
-+	/* don't disable USB clock */
-+	cpower->CLKSLOW &= ~S3C2410_CLKSLOW_UCLK_OFF;
-+
-+	/* clear interrupt registers */
-+	inl(S3C2410_UDC_EP_INT_REG);
-+	inl(S3C2410_UDC_USB_INT_REG);
-+	outl(0xff, S3C2410_UDC_EP_INT_REG);
-+	outl(0xff, S3C2410_UDC_USB_INT_REG);
-+
-+	/* enable USB interrupts for RESET and SUSPEND/RESUME */
-+	outl(S3C2410_UDC_USBINT_RESET|S3C2410_UDC_USBINT_SUSPEND,
-+	     S3C2410_UDC_USB_INT_EN_REG);
-+}
-+
-+static void udc_set_address(unsigned char address)
-+{
-+	address |= 0x80; /* ADDR_UPDATE bit */
-+	outl(address, S3C2410_UDC_FUNC_ADDR_REG);
-+}
-+
-+extern struct usb_device_descriptor device_descriptor;
-+
-+static void s3c2410_udc_ep0(void)
-+{
-+	u_int8_t ep0csr;
-+	struct usb_endpoint_instance *ep0 = udc_device->bus->endpoint_array;
-+
-+	S3C2410_UDC_SETIX(0);
-+	ep0csr = inl(S3C2410_UDC_IN_CSR1_REG);
-+
-+	/* clear stall status */
-+	if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) {
-+	    	serial_printf("Clearing SENT_STALL\n");
-+		clear_ep0_sst();
-+		if (ep0csr & S3C2410_UDC_EP0_CSR_SOPKTRDY)
-+			clear_ep0_opr();
-+		ep0->state = EP0_IDLE;
-+		return;
-+	}
-+
-+	/* clear setup end */
-+	if (ep0csr & S3C2410_UDC_EP0_CSR_SE
-+	    /* && ep0->state != EP0_IDLE */) {
-+	    	serial_printf("Clearing SETUP_END\n");
-+		clear_ep0_se();
-+#if 1
-+		if (ep0csr & S3C2410_UDC_EP0_CSR_SOPKTRDY) {
-+			/* Flush FIFO */
-+			while (inl(S3C2410_UDC_OUT_FIFO_CNT1_REG))
-+				inl(S3C2410_UDC_EP0_FIFO_REG);
-+			clear_ep0_opr();
-+		}
-+#endif
-+		ep0->state = EP0_IDLE;
-+		return;
-+	}
-+
-+	/* Don't ever put [serial] debugging in non-error codepaths here, it
-+	 * will violate the tight timing constraints of this USB Device
-+	 * controller (and lead to bus enumeration failures) */
-+
-+	switch (ep0->state) {
-+		int i, fifo_count;
-+		unsigned char *datap;
-+	case EP0_IDLE:
-+		if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY))
-+			break;
-+
-+		datap = (unsigned char *) &ep0_urb->device_request;
-+		/* host->device packet has been received */
-+
-+		/* pull it out of the fifo */
-+		fifo_count = fifo_count_out();
-+		for (i = 0; i < fifo_count; i++) {
-+			*datap = (unsigned char)inl(S3C2410_UDC_EP0_FIFO_REG);
-+			datap++;
-+		}
-+		if (fifo_count != 8) {
-+			debug("STRANGE FIFO COUNT: %u bytes\n", fifo_count);
-+			set_ep0_ss();
-+			return;
-+		}
-+
-+		if (ep0_urb->device_request.wLength == 0) {
-+			if (ep0_recv_setup(ep0_urb)) {
-+				/* Not a setup packet, stall next EP0 transaction */
-+				debug("can't parse setup packet1\n");
-+				set_ep0_ss();
-+				set_ep0_de_out();
-+				ep0->state = EP0_IDLE;
-+				return;
-+			}
-+			/* There are some requests with which we need to deal
-+			 * manually here */
-+			switch (ep0_urb->device_request.bRequest) {
-+			case USB_REQ_SET_CONFIGURATION:
-+				if (!ep0_urb->device_request.wValue)
-+					usbd_device_event_irq(udc_device,
-+							DEVICE_DE_CONFIGURED, 0);
-+				else
-+					usbd_device_event_irq(udc_device,
-+							DEVICE_CONFIGURED, 0);
-+				break;
-+			case USB_REQ_SET_ADDRESS:
-+				udc_set_address(udc_device->address);
-+				usbd_device_event_irq(udc_device,
-+						DEVICE_ADDRESS_ASSIGNED, 0);
-+				break;
-+			default:
-+				break;
-+			}
-+			set_ep0_de_out();
-+			ep0->state = EP0_IDLE;
-+		} else {
-+			if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
-+			    == USB_REQ_HOST2DEVICE) {
-+				clear_ep0_opr();
-+				ep0->state = EP0_OUT_DATA_PHASE;
-+				ep0_urb->buffer = ep0_urb->buffer_data;
-+				ep0_urb->buffer_length = sizeof(ep0_urb->buffer_data);
-+				ep0_urb->actual_length = 0;
-+			} else {
-+				ep0->state = EP0_IN_DATA_PHASE;
-+
-+				if (ep0_recv_setup(ep0_urb)) {
-+					/* Not a setup packet, stall next EP0 transaction */
-+					debug("can't parse setup packet2\n");
-+					set_ep0_ss();
-+					//set_ep0_de_out();
-+					ep0->state = EP0_IDLE;
-+					return;
-+				}
-+				clear_ep0_opr();
-+				ep0->tx_urb = ep0_urb;
-+				ep0->sent = ep0->last = 0;
-+
-+				if (s3c2410_write_noniso_tx_fifo(ep0)) {
-+					ep0->state = EP0_IDLE;
-+					set_ep0_de_in();
-+				} else
-+					set_ep0_ipr();
-+			}
-+		}
-+		break;
-+	case EP0_IN_DATA_PHASE:
-+		if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY)) {
-+			ep0->sent += ep0->last;
-+
-+			if (s3c2410_write_noniso_tx_fifo(ep0)) {
-+				ep0->state = EP0_IDLE;
-+				set_ep0_de_in();
-+			} else
-+				set_ep0_ipr();
-+		}
-+		break;
-+	case EP0_OUT_DATA_PHASE:
-+		if (ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) {
-+			u32 urb_avail = ep0_urb->buffer_length - ep0_urb->actual_length;
-+			u_int8_t *cp = ep0_urb->buffer + ep0_urb->actual_length;
-+			int i, fifo_count;
-+
-+			fifo_count = fifo_count_out();
-+			if (fifo_count < urb_avail)
-+				urb_avail = fifo_count;
-+
-+			for (i = 0; i < urb_avail; i++)
-+				*cp++ = inl(S3C2410_UDC_EP0_FIFO_REG);
-+
-+			ep0_urb->actual_length += urb_avail;
-+
-+			if (fifo_count < ep0->rcv_packetSize ||
-+			    ep0_urb->actual_length >= ep0_urb->device_request.wLength) {
-+				ep0->state = EP0_IDLE;
-+				if (ep0_recv_setup(ep0_urb)) {
-+					/* Not a setup packet, stall next EP0 transaction */
-+					debug("can't parse setup packet3\n");
-+					set_ep0_ss();
-+					//set_ep0_de_out();
-+					return;
-+				}
-+				set_ep0_de_out();
-+			} else
-+				clear_ep0_opr();
-+		}
-+		break;
-+	case EP0_END_XFER:
-+		ep0->state = EP0_IDLE;
-+		break;
-+	case EP0_STALL:
-+		//set_ep0_ss;
-+		ep0->state = EP0_IDLE;
-+		break;
-+	}
-+}
-+
-+
-+static void s3c2410_udc_epn(int ep)
-+{
-+	struct usb_endpoint_instance *endpoint;
-+	struct urb *urb;
-+	u32 ep_csr1;
-+
-+	if (ep >= S3C2410_UDC_NUM_ENDPOINTS)
-+		return;
-+
-+	endpoint = &udc_device->bus->endpoint_array[ep];
-+
-+	S3C2410_UDC_SETIX(ep);
-+
-+	if (endpoint->endpoint_address & USB_DIR_IN) {
-+		/* IN transfer (device to host) */
-+		ep_csr1 = inl(S3C2410_UDC_IN_CSR1_REG);
-+		debug("for ep=%u, CSR1=0x%x ", ep, ep_csr1);
-+
-+		urb = endpoint->tx_urb;
-+		if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) {
-+			/* Stall handshake */
-+			debug("stall\n");
-+			outl(0x00, S3C2410_UDC_IN_CSR1_REG);
-+			return;
-+		}
-+		if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && urb &&
-+		      urb->actual_length) {
-+
-+			debug("completing previously send data ");
-+			usbd_tx_complete(endpoint);
-+
-+			/* push pending data into FIFO */
-+			if ((endpoint->last == endpoint->tx_packetSize) &&
-+			    (urb->actual_length - endpoint->sent - endpoint->last == 0)) {
-+				endpoint->sent += endpoint->last;
-+				/* Write 0 bytes of data (ZLP) */
-+				debug("ZLP ");
-+				outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG);
-+			} else {
-+				/* write actual data to fifo */
-+				debug("TX_DATA ");
-+				s3c2410_write_noniso_tx_fifo(endpoint);
-+				outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG);
-+			}
-+		}
-+		debug("\n");
-+	} else {
-+		/* OUT transfer (host to device) */
-+		ep_csr1 = inl(S3C2410_UDC_OUT_CSR1_REG);
-+		debug("for ep=%u, CSR1=0x%x ", ep, ep_csr1);
-+
-+		urb = endpoint->rcv_urb;
-+		if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) {
-+			/* Stall handshake */
-+			outl(0x00, S3C2410_UDC_IN_CSR1_REG);
-+			return;
-+		}
-+		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && urb) {
-+			/* Read pending data from fifo */
-+			u32 fifo_count = fifo_count_out();
-+			int is_last = 0;
-+			u32 i, urb_avail = urb->buffer_length - urb->actual_length;
-+			u8 *cp = urb->buffer + urb->actual_length;
-+
-+			if (fifo_count < endpoint->rcv_packetSize)
-+				is_last = 1;
-+
-+			debug("fifo_count=%u is_last=%, urb_avail=%u)\n",
-+				fifo_count, is_last, urb_avail);
-+
-+			if (fifo_count < urb_avail)
-+				urb_avail = fifo_count;
-+
-+			for (i = 0; i < urb_avail; i++)
-+				*cp++ = inb(ep_fifo_reg[ep]);
-+
-+			if (is_last)
-+				outl(ep_csr1 & ~S3C2410_UDC_OCSR1_PKTRDY,
-+				     S3C2410_UDC_OUT_CSR1_REG);
-+
-+			usbd_rcv_complete(endpoint, urb_avail, 0);
-+		}
-+	}
-+
-+	urb = endpoint->rcv_urb;
-+}
-+
-+/*
-+-------------------------------------------------------------------------------
-+*/
-+
-+/* this is just an empty wrapper for usbtty who assumes polling operation */
-+void udc_irq(void)
-+{
-+}
-+
-+/* Handle general USB interrupts and dispatch according to type.
-+ * This function implements TRM Figure 14-13.
-+ */
-+void s3c2410_udc_irq(void)
-+{
-+	struct usb_endpoint_instance *ep0 = udc_device->bus->endpoint_array;
-+	u_int32_t save_idx = inl(S3C2410_UDC_INDEX_REG);
-+
-+	/* read interrupt sources */
-+	u_int32_t usb_status = inl(S3C2410_UDC_USB_INT_REG);
-+	u_int32_t usbd_status = inl(S3C2410_UDC_EP_INT_REG);
-+
-+	//debug("< IRQ usbs=0x%02x, usbds=0x%02x start >", usb_status, usbd_status);
-+
-+	/* clear interrupts */
-+	outl(usb_status, S3C2410_UDC_USB_INT_REG);
-+
-+	if (usb_status & S3C2410_UDC_USBINT_RESET) {
-+		//serial_putc('R');
-+		debug("RESET pwr=0x%x\n", inl(S3C2410_UDC_PWR_REG));
-+		udc_setup_ep(udc_device, 0, ep0);
-+		outl(S3C2410_UDC_EP0_CSR_SSE|S3C2410_UDC_EP0_CSR_SOPKTRDY, S3C2410_UDC_EP0_CSR_REG);
-+		ep0->state = EP0_IDLE;
-+		usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
-+	}
-+
-+	if (usb_status & S3C2410_UDC_USBINT_RESUME) {
-+		debug("RESUME\n");
-+		usbd_device_event_irq(udc_device, DEVICE_BUS_ACTIVITY, 0);
-+	}
-+
-+	if (usb_status & S3C2410_UDC_USBINT_SUSPEND) {
-+		debug("SUSPEND\n");
-+		usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0);
-+	}
-+
-+	/* Endpoint Interrupts */
-+	if (usbd_status) {
-+		int i;
-+
-+		if (usbd_status & S3C2410_UDC_INT_EP0) {
-+			outl(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG);
-+			s3c2410_udc_ep0();
-+		}
-+
-+		for (i = 1; i < 5; i++) {
-+			u_int32_t tmp = 1 << i;
-+
-+			if (usbd_status & tmp) {
-+				/* FIXME: Handle EP X */
-+				outl(tmp, S3C2410_UDC_EP_INT_REG);
-+				s3c2410_udc_epn(i);
-+			}
-+		}
-+	}
-+	S3C2410_UDC_SETIX(save_idx);
-+}
-+
-+/*
-+-------------------------------------------------------------------------------
-+*/
-+
-+
-+/*
-+ * Start of public functions.
-+ */
-+
-+/* Called to start packet transmission. */
-+void udc_endpoint_write (struct usb_endpoint_instance *endpoint)
-+{
-+	unsigned short epnum =
-+		endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
-+
-+	debug("Entering for ep %x ", epnum);
-+
-+	if (endpoint->tx_urb) {
-+		u32 ep_csr1;
-+		debug("We have an URB, transmitting\n");
-+
-+		s3c2410_write_noniso_tx_fifo(endpoint);
-+
-+		S3C2410_UDC_SETIX(epnum);
-+
-+		ep_csr1 = inl(S3C2410_UDC_IN_CSR1_REG);
-+		outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG);
-+	} else
-+		debug("\n");
-+}
-+
-+/* Start to initialize h/w stuff */
-+int udc_init (void)
-+{
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
-+
-+	udc_device = NULL;
-+
-+	/* Set and check clock control.
-+	 * We might ought to be using the clock control API to do
-+	 * this instead of fiddling with the clock registers directly
-+	 * here.
-+	 */
-+	clk_power->CLKCON |= (1 << 7);
-+
-+	/* Print banner with device revision */
-+	printf("USB:   S3C2410 USB Deviced\n");
-+
-+	/*
-+	 * At this point, device is ready for configuration...
-+	 */
-+	outl(0x00, S3C2410_UDC_EP_INT_EN_REG);
-+	outl(0x00, S3C2410_UDC_USB_INT_EN_REG);
-+
-+	irq->INTMSK &= ~BIT_USBD;
-+
-+	return 0;
-+}
-+
-+/*
-+ * udc_setup_ep - setup endpoint
-+ *
-+ * Associate a physical endpoint with endpoint_instance
-+ */
-+int udc_setup_ep (struct usb_device_instance *device,
-+		   unsigned int ep, struct usb_endpoint_instance *endpoint)
-+{
-+	int ep_addr = endpoint->endpoint_address;
-+	int packet_size;
-+	int attributes;
-+	u_int32_t maxp;
-+
-+	S3C2410_UDC_SETIX(ep);
-+
-+	if (ep) {
-+		if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+			/* IN endpoint */
-+			outl(S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT,
-+			     S3C2410_UDC_IN_CSR1_REG);
-+			outl(S3C2410_UDC_ICSR2_MODEIN, S3C2410_UDC_IN_CSR2_REG);
-+			packet_size = endpoint->tx_packetSize;
-+			attributes = endpoint->tx_attributes;
-+		} else {
-+			/* OUT endpoint */
-+			outl(S3C2410_UDC_ICSR1_CLRDT, S3C2410_UDC_IN_CSR1_REG);
-+			outl(0, S3C2410_UDC_IN_CSR2_REG);
-+			outl(S3C2410_UDC_OCSR1_FFLUSH|S3C2410_UDC_OCSR1_CLRDT,
-+			     S3C2410_UDC_OUT_CSR1_REG);
-+			outl(0, S3C2410_UDC_OUT_CSR2_REG);
-+			packet_size = endpoint->rcv_packetSize;
-+			attributes = endpoint->rcv_attributes;
-+		}
-+	} else
-+		packet_size = endpoint->tx_packetSize;
-+
-+	switch (packet_size) {
-+	case 8:
-+		maxp = S3C2410_UDC_MAXP_8;
-+		break;
-+	case 16:
-+		maxp = S3C2410_UDC_MAXP_16;
-+		break;
-+	case 32:
-+		maxp = S3C2410_UDC_MAXP_32;
-+		break;
-+	case 64:
-+		maxp = S3C2410_UDC_MAXP_64;
-+		break;
-+	default:
-+		debug("invalid packet size %u\n", packet_size);
-+		return -1;
-+	}
-+
-+	debug("setting up endpoint %u addr %x packet_size %u maxp %u\n", ep,
-+		endpoint->endpoint_address, packet_size, maxp);
-+
-+	/* Set maximum packet size */
-+	writel(maxp, S3C2410_UDC_MAXP_REG);
-+
-+	return 0;
-+}
-+
-+/* ************************************************************************** */
-+
-+/**
-+ * udc_connected - is the USB cable connected
-+ *
-+ * Return non-zero if cable is connected.
-+ */
-+#if 0
-+int udc_connected (void)
-+{
-+	return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT);
-+}
-+#endif
-+
-+/* Turn on the USB connection by enabling the pullup resistor */
-+void udc_connect (void)
-+{
-+	debug("connect, enable Pullup\n");
-+	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
-+
-+	udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 0);
-+	udelay(10000);
-+	udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 1);
-+
-+	irq->INTMSK &= ~BIT_USBD;
-+}
-+
-+/* Turn off the USB connection by disabling the pullup resistor */
-+void udc_disconnect (void)
-+{
-+	debug("disconnect, disable Pullup\n");
-+	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
-+
-+	udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 0);
-+
-+	/* Disable interrupt (we don't want to get interrupts while the kernel
-+	 * is relocating itself */
-+	irq->INTMSK |= BIT_USBD;
-+}
-+
-+/* Switch on the UDC */
-+void udc_enable (struct usb_device_instance *device)
-+{
-+	debug("enable device %p, status %d\n", device, device->status);
-+
-+	/* Save the device structure pointer */
-+	udc_device = device;
-+
-+	/* Setup ep0 urb */
-+	if (!ep0_urb)
-+		ep0_urb = usbd_alloc_urb(udc_device,
-+					 udc_device->bus->endpoint_array);
-+	else
-+		serial_printf("udc_enable: ep0_urb already allocated %p\n",
-+			       ep0_urb);
-+
-+	s3c2410_configure_device(device);
-+}
-+
-+/* Switch off the UDC */
-+void udc_disable (void)
-+{
-+	debug("disable UDC\n");
-+
-+	s3c2410_deconfigure_device();
-+
-+	/* Free ep0 URB */
-+	if (ep0_urb) {
-+		/*usbd_dealloc_urb(ep0_urb); */
-+		ep0_urb = NULL;
-+	}
-+
-+	/* Reset device pointer.
-+	 * We ought to do this here to balance the initialization of udc_device
-+	 * in udc_enable, but some of our other exported functions get called
-+	 * by the bus interface driver after udc_disable, so we have to hang on
-+	 * to the device pointer to avoid a null pointer dereference. */
-+	/* udc_device = NULL; */
-+}
-+
-+/**
-+ * udc_startup - allow udc code to do any additional startup
-+ */
-+void udc_startup_events (struct usb_device_instance *device)
-+{
-+	/* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
-+	usbd_device_event_irq (device, DEVICE_INIT, 0);
-+
-+	/* The DEVICE_CREATE event puts the USB device in the state
-+	 * STATE_ATTACHED.
-+	 */
-+	usbd_device_event_irq (device, DEVICE_CREATE, 0);
-+
-+	/* Some USB controller driver implementations signal
-+	 * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
-+	 * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
-+	 * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
-+	 * The OMAP USB client controller has the capability to detect when the
-+	 * USB cable is connected to a powered USB bus via the ATT bit in the
-+	 * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and
-+	 * DEVICE_RESET events until later.
-+	 */
-+
-+	/* The GTA01 can detect usb device attachment, but we just assume being
-+	 * attached for now (go to STATE_POWERED) */
-+	usbd_device_event_irq (device, DEVICE_HUB_CONFIGURED, 0);
-+
-+	udc_enable (device);
-+}
-+
-+void udc_set_nak(int epid)
-+{
-+	/* FIXME: implement this */
-+}
-+
-+void udc_unset_nak(int epid)
-+{
-+	/* FIXME: implement this */
-+}
-+
-+#endif /* CONFIG_S3C2410 && CONFIG_USB_DEVICE */
-Index: u-boot/drivers/usbdcore_s3c2410.h
-===================================================================
---- /dev/null
-+++ u-boot/drivers/usbdcore_s3c2410.h
-@@ -0,0 +1,273 @@
-+/* linux/include/asm/arch-s3c2410/regs-udc.h
-+ *
-+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
-+ *
-+ * This include file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ *  Changelog:
-+ *    01-08-2004	Initial creation
-+ *    12-09-2004	Cleanup for submission
-+ *    24-10-2004	Fixed S3C2410_UDC_MAXP_REG definition
-+ *    10-03-2005	Changed S3C2410_VA to S3C24XX_VA
-+ *    10-01-2007	Modify for u-boot
-+ */
-+
-+#ifndef __ASM_ARCH_REGS_UDC_H
-+#define __ASM_ARCH_REGS_UDC_H
-+
-+#define S3C2410_UDC_REG_BASE_PHYS	0x52000000
-+#define S3C2410_UDC_NUM_ENDPOINTS	5
-+
-+#define S3C2410_USBDREG(x) (x + S3C2410_UDC_REG_BASE_PHYS)
-+
-+#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
-+#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
-+#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
-+
-+#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
-+#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
-+
-+#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
-+
-+#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
-+#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
-+
-+#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
-+#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
-+#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
-+#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
-+#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
-+
-+#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
-+#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
-+#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
-+#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
-+#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
-+#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
-+
-+#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
-+#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
-+#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
-+#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
-+#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
-+#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
-+
-+#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
-+#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
-+#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
-+#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
-+#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
-+#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
-+
-+#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
-+#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
-+#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
-+#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
-+#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
-+#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
-+
-+#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
-+
-+/* indexed registers */
-+
-+#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
-+
-+#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
-+
-+#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
-+#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
-+
-+#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
-+#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
-+#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
-+#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
-+
-+
-+
-+#define S3C2410_UDC_PWR_ISOUP		(1<<7) // R/W
-+#define S3C2410_UDC_PWR_RESET		(1<<3) // R
-+#define S3C2410_UDC_PWR_RESUME		(1<<2) // R/W
-+#define S3C2410_UDC_PWR_SUSPEND		(1<<1) // R
-+#define S3C2410_UDC_PWR_ENSUSPEND	(1<<0) // R/W
-+
-+#define S3C2410_UDC_PWR_DEFAULT		0x00
-+
-+#define S3C2410_UDC_INT_EP4		(1<<4) // R/W (clear only)
-+#define S3C2410_UDC_INT_EP3		(1<<3) // R/W (clear only)
-+#define S3C2410_UDC_INT_EP2		(1<<2) // R/W (clear only)
-+#define S3C2410_UDC_INT_EP1		(1<<1) // R/W (clear only)
-+#define S3C2410_UDC_INT_EP0		(1<<0) // R/W (clear only)
-+
-+#define S3C2410_UDC_USBINT_RESET	(1<<2) // R/W (clear only)
-+#define S3C2410_UDC_USBINT_RESUME	(1<<1) // R/W (clear only)
-+#define S3C2410_UDC_USBINT_SUSPEND	(1<<0) // R/W (clear only)
-+
-+#define S3C2410_UDC_INTE_EP4		(1<<4) // R/W
-+#define S3C2410_UDC_INTE_EP3		(1<<3) // R/W
-+#define S3C2410_UDC_INTE_EP2		(1<<2) // R/W
-+#define S3C2410_UDC_INTE_EP1		(1<<1) // R/W
-+#define S3C2410_UDC_INTE_EP0		(1<<0) // R/W
-+
-+#define S3C2410_UDC_USBINTE_RESET	(1<<2) // R/W
-+#define S3C2410_UDC_USBINTE_SUSPEND	(1<<0) // R/W
-+
-+
-+#define S3C2410_UDC_INDEX_EP0		(0x00)
-+#define S3C2410_UDC_INDEX_EP1		(0x01) // ??
-+#define S3C2410_UDC_INDEX_EP2		(0x02) // ??
-+#define S3C2410_UDC_INDEX_EP3		(0x03) // ??
-+#define S3C2410_UDC_INDEX_EP4		(0x04) // ??
-+
-+#define S3C2410_UDC_ICSR1_CLRDT		(1<<6) // R/W
-+#define S3C2410_UDC_ICSR1_SENTSTL	(1<<5) // R/W (clear only)
-+#define S3C2410_UDC_ICSR1_SENDSTL	(1<<4) // R/W
-+#define S3C2410_UDC_ICSR1_FFLUSH	(1<<3) // W   (set only)
-+#define S3C2410_UDC_ICSR1_UNDRUN	(1<<2) // R/W (clear only)
-+#define S3C2410_UDC_ICSR1_PKTRDY	(1<<0) // R/W (set only)
-+
-+#define S3C2410_UDC_ICSR2_AUTOSET	(1<<7) // R/W
-+#define S3C2410_UDC_ICSR2_ISO		(1<<6) // R/W
-+#define S3C2410_UDC_ICSR2_MODEIN	(1<<5) // R/W
-+#define S3C2410_UDC_ICSR2_DMAIEN	(1<<4) // R/W
-+
-+#define S3C2410_UDC_OCSR1_CLRDT		(1<<7) // R/W
-+#define S3C2410_UDC_OCSR1_SENTSTL	(1<<6) // R/W (clear only)
-+#define S3C2410_UDC_OCSR1_SENDSTL	(1<<5) // R/W
-+#define S3C2410_UDC_OCSR1_FFLUSH	(1<<4) // R/W
-+#define S3C2410_UDC_OCSR1_DERROR	(1<<3) // R
-+#define S3C2410_UDC_OCSR1_OVRRUN	(1<<2) // R/W (clear only)
-+#define S3C2410_UDC_OCSR1_PKTRDY	(1<<0) // R/W (clear only)
-+
-+#define S3C2410_UDC_OCSR2_AUTOCLR	(1<<7) // R/W
-+#define S3C2410_UDC_OCSR2_ISO		(1<<6) // R/W
-+#define S3C2410_UDC_OCSR2_DMAIEN	(1<<5) // R/W
-+
-+#define S3C2410_UDC_SETIX(X)	writel(X, S3C2410_UDC_INDEX_REG)
-+
-+#define S3C2410_UDC_EP0_CSR_OPKRDY	(1<<0)
-+#define S3C2410_UDC_EP0_CSR_IPKRDY	(1<<1)
-+#define S3C2410_UDC_EP0_CSR_SENTSTL	(1<<2)
-+#define S3C2410_UDC_EP0_CSR_DE		(1<<3)
-+#define S3C2410_UDC_EP0_CSR_SE		(1<<4)
-+#define S3C2410_UDC_EP0_CSR_SENDSTL	(1<<5)
-+#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1<<6)
-+#define S3C2410_UDC_EP0_CSR_SSE	(1<<7)
-+
-+#define S3C2410_UDC_MAXP_8		(1<<0)
-+#define S3C2410_UDC_MAXP_16		(1<<1)
-+#define S3C2410_UDC_MAXP_32		(1<<2)
-+#define S3C2410_UDC_MAXP_64		(1<<3)
-+
-+/****************** MACROS ******************/
-+#define BIT_MASK	0xFF
-+
-+#if 1
-+#define maskl(v,m,a)      \
-+		writel((readl(a) & ~(m))|((v)&(m)), (a))
-+#else
-+#define maskl(v,m,a)	do {					\
-+	unsigned long foo = readl(a);				\
-+	unsigned long bar = (foo & ~(m)) | ((v)&(m));		\
-+	serial_printf("0x%08x:0x%x->0x%x\n", (a), foo, bar);	\
-+	writel(bar, (a));					\
-+} while(0)
-+#endif
-+
-+#define clear_ep0_sst() do {			\
-+	S3C2410_UDC_SETIX(0); 			\
-+	writel(0x00, S3C2410_UDC_EP0_CSR_REG); 	\
-+} while(0)
-+
-+#define clear_ep0_se() do {				\
-+	S3C2410_UDC_SETIX(0); 				\
-+	maskl(S3C2410_UDC_EP0_CSR_SSE,			\
-+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG); 	\
-+} while(0)
-+
-+#define clear_ep0_opr() do {				\
-+	S3C2410_UDC_SETIX(0);				\
-+	maskl(S3C2410_UDC_EP0_CSR_SOPKTRDY,		\
-+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG); 	\
-+} while(0)
-+
-+#define set_ep0_ipr() do {				\
-+	S3C2410_UDC_SETIX(0);				\
-+	maskl(S3C2410_UDC_EP0_CSR_IPKRDY,		\
-+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG); 	\
-+} while(0)
-+
-+#define set_ep0_de() do {				\
-+	S3C2410_UDC_SETIX(0);				\
-+	maskl(S3C2410_UDC_EP0_CSR_DE,			\
-+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
-+} while(0)
-+
-+#define set_ep0_ss() do {				\
-+	S3C2410_UDC_SETIX(0);				\
-+	maskl(S3C2410_UDC_EP0_CSR_SENDSTL,		\
-+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
-+} while(0)
-+
-+#define set_ep0_de_out() do {				\
-+	S3C2410_UDC_SETIX(0);				\
-+	maskl((S3C2410_UDC_EP0_CSR_SOPKTRDY	 	\
-+		| S3C2410_UDC_EP0_CSR_DE),		\
-+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
-+} while(0)
-+
-+#define set_ep0_sse_out() do {				\
-+	S3C2410_UDC_SETIX(0);				\
-+	maskl((S3C2410_UDC_EP0_CSR_SOPKTRDY 		\
-+		| S3C2410_UDC_EP0_CSR_SSE),		\
-+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
-+} while(0)
-+
-+#define set_ep0_de_in() do {				\
-+	S3C2410_UDC_SETIX(0);				\
-+	maskl((S3C2410_UDC_EP0_CSR_IPKRDY		\
-+		| S3C2410_UDC_EP0_CSR_DE),		\
-+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
-+} while(0)
-+
-+
-+#if 0
-+
-+#define clear_stall_ep1_out(base) do {			\
-+	S3C2410_UDC_SETIX(base,EP1);			\
-+	orl(0,base+S3C2410_UDC_OUT_CSR1_REG);		\
-+} while(0)
-+
-+
-+#define clear_stall_ep2_out(base) do {			\
-+	S3C2410_UDC_SETIX(base,EP2);			\
-+	orl(0, base+S3C2410_UDC_OUT_CSR1_REG);		\
-+} while(0)
-+
-+
-+#define clear_stall_ep3_out(base) do {			\
-+	S3C2410_UDC_SETIX(base,EP3);			\
-+	orl(0,base+S3C2410_UDC_OUT_CSR1_REG);		\
-+} while(0)
-+
-+
-+#define clear_stall_ep4_out(base) do {			\
-+	S3C2410_UDC_SETIX(base,EP4);			\
-+	orl(0, base+S3C2410_UDC_OUT_CSR1_REG);		\
-+} while(0)
-+
-+#endif
-+
-+/* S3C2410 Endpoint parameters */
-+#define EP0_MAX_PACKET_SIZE	16
-+#define UDC_OUT_ENDPOINT 	2
-+#define UDC_OUT_PACKET_SIZE	64
-+#define UDC_IN_ENDPOINT		1
-+#define UDC_IN_PACKET_SIZE 	64
-+#define UDC_INT_ENDPOINT	5
-+#define UDC_INT_PACKET_SIZE	16
-+#define UDC_BULK_PACKET_SIZE	16
-+
-+#endif
-Index: u-boot/drivers/usbdcore_ep0.c
-===================================================================
---- u-boot.orig/drivers/usbdcore_ep0.c
-+++ u-boot/drivers/usbdcore_ep0.c
-@@ -43,7 +43,7 @@
- 
- #include <common.h>
- 
--#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
-+#if defined(CONFIG_USB_DEVICE)
- #include "usbdcore.h"
- 
- #if 0
-@@ -187,9 +187,13 @@
- 	if (!urb || !urb->buffer || !urb->buffer_length
- 	    || (urb->buffer_length < 255)) {
- 		dbg_ep0 (2, "invalid urb %p", urb);
-+		serial_printf("invalid urb %p", urb);
- 		return -1L;
- 	}
- 
-+	/* re-initialize the ep0 buffer pointer */
-+	urb->buffer = (u8 *) urb->buffer_data;
-+
- 	/* setup tx urb */
- 	urb->actual_length = 0;
- 	cp = urb->buffer;
-@@ -206,17 +210,8 @@
- 			     usbd_device_device_descriptor (device, port))) {
- 				return -1;
- 			}
--			/* copy descriptor for this device */
--			copy_config (urb, device_descriptor,
--				     sizeof (struct usb_device_descriptor),
--				     max);
--
--			/* correct the correct control endpoint 0 max packet size into the descriptor */
--			device_descriptor =
--				(struct usb_device_descriptor *) urb->buffer;
--			device_descriptor->bMaxPacketSize0 =
--				urb->device->bus->maxpacketsize;
--
-+			urb->buffer = device_descriptor;
-+			urb->actual_length = MIN(sizeof(*device_descriptor), max);
- 		}
- 		/*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */
- 		break;
-@@ -250,11 +245,9 @@
- 					 index);
- 				return -1;
- 			}
--			copy_config (urb, configuration_descriptor,
--				     sizeof (struct
--					     usb_configuration_descriptor),
--				     max);
--
-+			urb->buffer = configuration_descriptor;
-+			urb->actual_length =
-+				MIN(le16_to_cpu(configuration_descriptor->wTotalLength), max);
- 		}
- 		break;
- 
-@@ -376,6 +369,7 @@
- 	dbg_ep0 (0, "entering ep0_recv_setup()");
- 	if (!urb || !urb->device) {
- 		dbg_ep0 (3, "invalid URB %p", urb);
-+		serial_printf("invalid URB %p", urb);
- 		return -1;
- 	}
- 
-@@ -400,6 +394,7 @@
- 			return device->cdc_recv_setup(request, urb);
- 		dbg_ep0 (1, "non standard request: %x",
- 			 request->bmRequestType & USB_REQ_TYPE_MASK);
-+		serial_printf("non standard request: %x", request->bmRequestType & USB_REQ_TYPE_MASK);
- 		return -1;	/* Stall here */
- 	}
- 
-@@ -448,6 +443,8 @@
- 		dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
- 			 USBD_DEVICE_REQUESTS (request->bRequest),
- 			 usbd_device_states[device->device_state]);
-+		serial_printf("request %s not allowed in UNKNOWN state: %s", USBD_DEVICE_REQUESTS (request->bRequest), usbd_device_states[device->device_state]);
-+		break;
- 		return -1;
- 	}
- 
-@@ -545,7 +542,8 @@
- 			/*dbg_ep0(2, "address: %d %d %d", */
- 			/*        request->wValue, le16_to_cpu(request->wValue), device->address); */
- 
--			serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n");
-+			//serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n");
-+			//udc_set_address(device->address);
- 			return 0;
- 
- 		case USB_REQ_SET_DESCRIPTOR:	/* XXX should we support this? */
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -173,6 +173,16 @@
- #define CONFIG_USB_OHCI		1
- #endif
- 
-+#define CONFIG_USB_DEVICE	1
-+#define CONFIG_USB_TTY		1
-+#define CFG_CONSOLE_IS_IN_ENV	1
-+#define CONFIG_USBD_VENDORID 		0x1457     /* Linux/NetChip */
-+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x5120    /* gserial */
-+#define CONFIG_USBD_PRODUCTID_CDCACM 	0x5119    /* CDC ACM */
-+#define CONFIG_USBD_MANUFACTURER	"Openmoko, Inc"
-+#define CONFIG_USBD_PRODUCT_NAME	"Neo1973 Bootloader " U_BOOT_VERSION
-+#define CONFIG_EXTRA_ENV_SETTINGS 	"usbtty=cdc_acm\0"
-+
- /*-----------------------------------------------------------------------
-  * Physical Memory Map
-  */
-Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c
-+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c
-@@ -222,6 +222,13 @@
- 	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
- 	u_int32_t intpnd = irq->INTPND;
- 
-+#ifdef CONFIG_USB_DEVICE
-+	if (intpnd & BIT_USBD) {
-+		s3c2410_udc_irq();
-+		irq->SRCPND = BIT_USBD;
-+		irq->INTPND = BIT_USBD;
-+	}
-+#endif /* USB_DEVICE */
- }
- #endif /* USE_IRQ */
- 
-Index: u-boot/drivers/usbtty.h
-===================================================================
---- u-boot.orig/drivers/usbtty.h
-+++ u-boot/drivers/usbtty.h
-@@ -29,6 +29,8 @@
- #include "usbdcore_mpc8xx.h"
- #elif defined(CONFIG_OMAP1510)
- #include "usbdcore_omap1510.h"
-+#elif defined(CONFIG_S3C2410)
-+#include "usbdcore_s3c2410.h"
- #endif
- 
- #include <config.h>
-Index: u-boot/board/neo1973/common/cmd_neo1973.c
-===================================================================
---- u-boot.orig/board/neo1973/common/cmd_neo1973.c
-+++ u-boot/board/neo1973/common/cmd_neo1973.c
-@@ -72,6 +72,18 @@
- 			neo1973_vibrator(1);
- 		else
- 			neo1973_vibrator(0);
-+	} else if (!strcmp(argv[1], "udc")) {
-+		if (argc < 3)
-+			goto out_help;
-+		if (!strcmp(argv[2], "udc")) {
-+			if (argc < 4)
-+				goto out_help;
-+			if (!strcmp(argv[3], "on"))
-+				udc_connect();
-+			else
-+				udc_disconnect();
-+		} else
-+			goto out_help;
- 	} else {
- out_help:
- 		printf("Usage:\n%s\n", cmdtp->usage);
-@@ -95,5 +107,6 @@
- 	"neo1973 charger off - disable charging\n"
- 	"neo1973 backlight (on|off) - switch backlight on or off\n"
- 	"neo1973 vibrator (on|off) - switch vibrator on or off\n"
-+	"neo1973 udc pullup (on|off) - switch pull-up on or off\n"
- );
- #endif	/* CFG_CMD_BDI */
-Index: u-boot/board/neo1973/gta01/Makefile
-===================================================================
---- u-boot.orig/board/neo1973/gta01/Makefile
-+++ u-boot/board/neo1973/gta01/Makefile
-@@ -25,7 +25,7 @@
- 
- LIB	= lib$(BOARD).a
- 
--OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o
-+OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o
- SOBJS	:= ../common/lowlevel_init.o
- 
- $(LIB):	$(OBJS) $(SOBJS)
-Index: u-boot/board/neo1973/common/udc.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/udc.c
-@@ -0,0 +1,23 @@
-+
-+#include <common.h>
-+#include <usbdcore.h>
-+#include <s3c2410.h>
-+
-+void udc_ctrl(enum usbd_event event, int param)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	switch (event) {
-+	case UDC_CTRL_PULLUP_ENABLE:
-+#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \
-+    defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
-+		if (param)
-+			gpio->GPBDAT |= (1 << 9);
-+		else
-+			gpio->GPBDAT &= ~(1 << 9);
-+#endif
-+		break;
-+	default:
-+		break;
-+	}
-+}
-Index: u-boot/include/usbdcore.h
-===================================================================
---- u-boot.orig/include/usbdcore.h
-+++ u-boot/include/usbdcore.h
-@@ -671,4 +671,10 @@
- void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad);
- void usbd_tx_complete (struct usb_endpoint_instance *endpoint);
- 
-+enum usbd_event {
-+	UDC_CTRL_PULLUP_ENABLE,
-+};
-+
-+void udc_ctrl(enum usbd_event event, int param);
-+#endif
- #endif
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2440.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2440.patch
deleted file mode 100644
index da0fb8cf2d..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2440.patch
+++ /dev/null
@@ -1,1301 +0,0 @@
-Add proper support for S3C2440 CPU's
-
-Index: u-boot/include/s3c24x0.h
-===================================================================
---- u-boot.orig/include/s3c24x0.h
-+++ u-boot/include/s3c24x0.h
-@@ -82,7 +82,7 @@
- 	S3C24X0_REG32	PRIORITY;
- 	S3C24X0_REG32	INTPND;
- 	S3C24X0_REG32	INTOFFSET;
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	S3C24X0_REG32	SUBSRCPND;
- 	S3C24X0_REG32	INTSUBMSK;
- #endif
-@@ -92,11 +92,11 @@
- /* DMAS (see manual chapter 8) */
- typedef struct {
- 	S3C24X0_REG32	DISRC;
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	S3C24X0_REG32	DISRCC;
- #endif
- 	S3C24X0_REG32	DIDST;
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	S3C24X0_REG32	DIDSTC;
- #endif
- 	S3C24X0_REG32	DCON;
-@@ -107,7 +107,7 @@
- #ifdef CONFIG_S3C2400
- 	S3C24X0_REG32	res[1];
- #endif
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	S3C24X0_REG32	res[7];
- #endif
- } /*__attribute__((__packed__))*/ S3C24X0_DMA;
-@@ -126,6 +126,9 @@
- 	S3C24X0_REG32	CLKCON;
- 	S3C24X0_REG32	CLKSLOW;
- 	S3C24X0_REG32	CLKDIVN;
-+#ifdef CONFIG_S3C2440
-+	S3C24X0_REG32	CAMDIVN;
-+#endif
- } /*__attribute__((__packed__))*/ S3C24X0_CLOCK_POWER;
- 
- 
-@@ -145,7 +148,7 @@
- 	S3C24X0_REG32	res[8];
- 	S3C24X0_REG32	DITHMODE;
- 	S3C24X0_REG32	TPAL;
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	S3C24X0_REG32	LCDINTPND;
- 	S3C24X0_REG32	LCDSRCPND;
- 	S3C24X0_REG32	LCDINTMSK;
-@@ -157,6 +160,9 @@
- /* NAND FLASH (see S3C2410 manual chapter 6) */
- typedef struct {
- 	S3C24X0_REG32	NFCONF;
-+#ifdef CONFIG_S3C2440
-+	S3C24X0_REG32	NFCONT;
-+#endif
- 	S3C24X0_REG32	NFCMD;
- 	S3C24X0_REG32	NFADDR;
- 	S3C24X0_REG32	NFDATA;
-@@ -164,6 +170,15 @@
- 	S3C24X0_REG32	NFECC;
- } /*__attribute__((__packed__))*/ S3C2410_NAND;
- 
-+/* NAND FLASH (see S3C2440 manual chapter 6) */
-+typedef struct {
-+	S3C24X0_REG32	NFCONF;
-+	S3C24X0_REG32	NFCMD;
-+	S3C24X0_REG32	NFADDR;
-+	S3C24X0_REG32	NFDATA;
-+	S3C24X0_REG32	NFSTAT;
-+	S3C24X0_REG32	NFECC;
-+} /*__attribute__((__packed__))*/ S3C2440_NAND;
- 
- /* UART (see manual chapter 11) */
- typedef struct {
-@@ -451,6 +466,65 @@
- 	S3C24X0_REG32	GSTATUS3;
- 	S3C24X0_REG32	GSTATUS4;
- #endif
-+#ifdef CONFIG_S3C2440
-+	S3C24X0_REG32	GPACON;
-+	S3C24X0_REG32	GPADAT;
-+	S3C24X0_REG32	res1[2];
-+	S3C24X0_REG32	GPBCON;
-+	S3C24X0_REG32	GPBDAT;
-+	S3C24X0_REG32	GPBUP;
-+	S3C24X0_REG32	res2;
-+	S3C24X0_REG32	GPCCON;
-+	S3C24X0_REG32	GPCDAT;
-+	S3C24X0_REG32	GPCUP;
-+	S3C24X0_REG32	res3;
-+	S3C24X0_REG32	GPDCON;
-+	S3C24X0_REG32	GPDDAT;
-+	S3C24X0_REG32	GPDUP;
-+	S3C24X0_REG32	res4;
-+	S3C24X0_REG32	GPECON;
-+	S3C24X0_REG32	GPEDAT;
-+	S3C24X0_REG32	GPEUP;
-+	S3C24X0_REG32	res5;
-+	S3C24X0_REG32	GPFCON;
-+	S3C24X0_REG32	GPFDAT;
-+	S3C24X0_REG32	GPFUP;
-+	S3C24X0_REG32	res6;
-+	S3C24X0_REG32	GPGCON;
-+	S3C24X0_REG32	GPGDAT;
-+	S3C24X0_REG32	GPGUP;
-+	S3C24X0_REG32	res7;
-+	S3C24X0_REG32	GPHCON;
-+	S3C24X0_REG32	GPHDAT;
-+	S3C24X0_REG32	GPHUP;
-+	S3C24X0_REG32	res8;
-+
-+	S3C24X0_REG32	MISCCR;
-+	S3C24X0_REG32	DCLKCON;
-+	S3C24X0_REG32	EXTINT0;
-+	S3C24X0_REG32	EXTINT1;
-+	S3C24X0_REG32	EXTINT2;
-+	S3C24X0_REG32	EINTFLT0;
-+	S3C24X0_REG32	EINTFLT1;
-+	S3C24X0_REG32	EINTFLT2;
-+	S3C24X0_REG32	EINTFLT3;
-+	S3C24X0_REG32	EINTMASK;
-+	S3C24X0_REG32	EINTPEND;
-+	S3C24X0_REG32	GSTATUS0;
-+	S3C24X0_REG32	GSTATUS1;
-+	S3C24X0_REG32	GSTATUS2;
-+	S3C24X0_REG32	GSTATUS3;
-+	S3C24X0_REG32	GSTATUS4;
-+
-+	S3C24X0_REG32	res9;
-+	S3C24X0_REG32	DSC0;
-+	S3C24X0_REG32	DSC1;
-+	S3C24X0_REG32	MSLCON;
-+	S3C24X0_REG32	GPJCON;
-+	S3C24X0_REG32	GPJDAT;
-+	S3C24X0_REG32	GPJUP;
-+	S3C24X0_REG32	res10;
-+#endif
- } /*__attribute__((__packed__))*/ S3C24X0_GPIO;
- 
- 
-@@ -637,8 +711,13 @@
- 	S3C24X0_REG32	SDIDCNT;
- 	S3C24X0_REG32	SDIDSTA;
- 	S3C24X0_REG32	SDIFSTA;
-+#if defined(CONFIG_S3C2410)
- 	S3C24X0_REG32	SDIDAT;
- 	S3C24X0_REG32	SDIIMSK;
-+#elif defined(CONFIG_S3C2440)
-+	S3C24X0_REG32	SDIIMSK;
-+	S3C24X0_REG32	SDIDAT;
-+#endif
- } /*__attribute__((__packed__))*/ S3C2410_SDI;
- 
- 
-Index: u-boot/rtc/s3c24x0_rtc.c
-===================================================================
---- u-boot.orig/rtc/s3c24x0_rtc.c
-+++ u-boot/rtc/s3c24x0_rtc.c
-@@ -34,6 +34,8 @@
- #include <s3c2400.h>
- #elif defined(CONFIG_S3C2410)
- #include <s3c2410.h>
-+#elif defined(CONFIG_S3C2440)
-+#include <s3c2440.h>
- #endif
- 
- #include <rtc.h>
-Index: u-boot/include/s3c2440.h
-===================================================================
---- /dev/null
-+++ u-boot/include/s3c2440.h
-@@ -0,0 +1,300 @@
-+/*
-+ * (C) Copyright 2003
-+ * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/************************************************
-+ * NAME	    : s3c2440.h
-+ * Version  : 2007.
-+ *
-+ * Based on S3C2410X User's manual Rev 1.1
-+ ************************************************/
-+
-+#ifndef __S3C2440_H__
-+#define __S3C2440_H__
-+
-+#define S3C24X0_UART_CHANNELS	3
-+#define S3C24X0_SPI_CHANNELS	2
-+
-+/* S3C2440 only supports 512 Byte HW ECC */
-+#define S3C2440_ECCSIZE		512
-+#define S3C2440_ECCBYTES	3
-+
-+/* S3C2440 device base addresses */
-+#define S3C24X0_MEMCTL_BASE		0x48000000
-+#define S3C24X0_USB_HOST_BASE		0x49000000
-+#define S3C24X0_INTERRUPT_BASE		0x4A000000
-+#define S3C24X0_DMA_BASE		0x4B000000
-+#define S3C24X0_CLOCK_POWER_BASE	0x4C000000
-+#define S3C24X0_LCD_BASE		0x4D000000
-+#define S3C2440_NAND_BASE		0x4E000000
-+#define S3C24X0_UART_BASE		0x50000000
-+#define S3C24X0_TIMER_BASE		0x51000000
-+#define S3C24X0_USB_DEVICE_BASE		0x52000140
-+#define USB_DEVICE_PHYS_ADR		0x52000000
-+#define S3C24X0_WATCHDOG_BASE		0x53000000
-+#define S3C24X0_I2C_BASE		0x54000000
-+#define S3C24X0_I2S_BASE		0x55000000
-+#define S3C24X0_GPIO_BASE		0x56000000
-+#define S3C24X0_RTC_BASE		0x57000000
-+#define S3C2440_ADC_BASE		0x58000000
-+#define S3C24X0_SPI_BASE		0x59000000
-+#define S3C2440_SDI_BASE		0x5A000000
-+
-+#define oNFCONF			0x00
-+#define oNFCONT			0x04
-+
-+#ifndef __ASSEMBLER__
-+
-+/* include common stuff */
-+#include <s3c24x0.h>
-+
-+typedef enum {
-+	S3C24X0_UART0,
-+	S3C24X0_UART1,
-+	S3C24X0_UART2
-+} S3C24X0_UARTS_NR;
-+
-+static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void)
-+{
-+	return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE;
-+}
-+static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void)
-+{
-+	return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE;
-+}
-+static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void)
-+{
-+	return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE;
-+}
-+static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void)
-+{
-+	return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE;
-+}
-+static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void)
-+{
-+	return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE;
-+}
-+static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void)
-+{
-+	return (S3C24X0_LCD * const)S3C24X0_LCD_BASE;
-+}
-+static inline S3C2440_NAND * S3C2440_GetBase_NAND(void)
-+{
-+	return (S3C2440_NAND * const)S3C2440_NAND_BASE;
-+}
-+static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
-+{
-+	return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000));
-+}
-+static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void)
-+{
-+	return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE;
-+}
-+static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void)
-+{
-+	return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE;
-+}
-+static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void)
-+{
-+	return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE;
-+}
-+static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void)
-+{
-+	return (S3C24X0_I2C * const)S3C24X0_I2C_BASE;
-+}
-+static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void)
-+{
-+	return (S3C24X0_I2S * const)S3C24X0_I2S_BASE;
-+}
-+static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void)
-+{
-+	return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE;
-+}
-+static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void)
-+{
-+	return (S3C24X0_RTC * const)S3C24X0_RTC_BASE;
-+}
-+/*
-+static inline S3C2440_ADC * S3C2440_GetBase_ADC(void)
-+{
-+	return (S3C2440_ADC * const)S3C2440_ADC_BASE;
-+}
-+static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void)
-+{
-+	return (S3C24X0_SPI * const)S3C24X0_SPI_BASE;
-+}
-+*/
-+static inline S3C2410_SDI * S3C2410_GetBase_SDI(void)
-+{
-+	return (S3C2410_SDI * const)S3C2440_SDI_BASE;
-+}
-+
-+#endif /* __ASSEMBLER__ */
-+
-+/* ISR */
-+#define pISR_RESET		(*(unsigned *)(_ISR_STARTADDRESS+0x0))
-+#define pISR_UNDEF		(*(unsigned *)(_ISR_STARTADDRESS+0x4))
-+#define pISR_SWI		(*(unsigned *)(_ISR_STARTADDRESS+0x8))
-+#define pISR_PABORT		(*(unsigned *)(_ISR_STARTADDRESS+0xC))
-+#define pISR_DABORT		(*(unsigned *)(_ISR_STARTADDRESS+0x10))
-+#define pISR_RESERVED		(*(unsigned *)(_ISR_STARTADDRESS+0x14))
-+#define pISR_IRQ		(*(unsigned *)(_ISR_STARTADDRESS+0x18))
-+#define pISR_FIQ		(*(unsigned *)(_ISR_STARTADDRESS+0x1C))
-+
-+#define pISR_EINT0		(*(unsigned *)(_ISR_STARTADDRESS+0x20))
-+#define pISR_EINT1		(*(unsigned *)(_ISR_STARTADDRESS+0x24))
-+#define pISR_EINT2		(*(unsigned *)(_ISR_STARTADDRESS+0x28))
-+#define pISR_EINT3		(*(unsigned *)(_ISR_STARTADDRESS+0x2C))
-+#define pISR_EINT4_7		(*(unsigned *)(_ISR_STARTADDRESS+0x30))
-+#define pISR_EINT8_23		(*(unsigned *)(_ISR_STARTADDRESS+0x34))
-+#define pISR_BAT_FLT		(*(unsigned *)(_ISR_STARTADDRESS+0x3C))
-+#define pISR_TICK		(*(unsigned *)(_ISR_STARTADDRESS+0x40))
-+#define pISR_WDT		(*(unsigned *)(_ISR_STARTADDRESS+0x44))
-+#define pISR_TIMER0		(*(unsigned *)(_ISR_STARTADDRESS+0x48))
-+#define pISR_TIMER1		(*(unsigned *)(_ISR_STARTADDRESS+0x4C))
-+#define pISR_TIMER2		(*(unsigned *)(_ISR_STARTADDRESS+0x50))
-+#define pISR_TIMER3		(*(unsigned *)(_ISR_STARTADDRESS+0x54))
-+#define pISR_TIMER4		(*(unsigned *)(_ISR_STARTADDRESS+0x58))
-+#define pISR_UART2		(*(unsigned *)(_ISR_STARTADDRESS+0x5C))
-+#define pISR_NOTUSED		(*(unsigned *)(_ISR_STARTADDRESS+0x60))
-+#define pISR_DMA0		(*(unsigned *)(_ISR_STARTADDRESS+0x64))
-+#define pISR_DMA1		(*(unsigned *)(_ISR_STARTADDRESS+0x68))
-+#define pISR_DMA2		(*(unsigned *)(_ISR_STARTADDRESS+0x6C))
-+#define pISR_DMA3		(*(unsigned *)(_ISR_STARTADDRESS+0x70))
-+#define pISR_SDI		(*(unsigned *)(_ISR_STARTADDRESS+0x74))
-+#define pISR_SPI0		(*(unsigned *)(_ISR_STARTADDRESS+0x78))
-+#define pISR_UART1		(*(unsigned *)(_ISR_STARTADDRESS+0x7C))
-+#define pISR_USBD		(*(unsigned *)(_ISR_STARTADDRESS+0x84))
-+#define pISR_USBH		(*(unsigned *)(_ISR_STARTADDRESS+0x88))
-+#define pISR_IIC		(*(unsigned *)(_ISR_STARTADDRESS+0x8C))
-+#define pISR_UART0		(*(unsigned *)(_ISR_STARTADDRESS+0x90))
-+#define pISR_SPI1		(*(unsigned *)(_ISR_STARTADDRESS+0x94))
-+#define pISR_RTC		(*(unsigned *)(_ISR_STARTADDRESS+0x98))
-+#define pISR_ADC		(*(unsigned *)(_ISR_STARTADDRESS+0xA0))
-+
-+
-+/* PENDING BIT */
-+#define BIT_EINT0		(0x1)
-+#define BIT_EINT1		(0x1<<1)
-+#define BIT_EINT2		(0x1<<2)
-+#define BIT_EINT3		(0x1<<3)
-+#define BIT_EINT4_7		(0x1<<4)
-+#define BIT_EINT8_23		(0x1<<5)
-+#define BIT_BAT_FLT		(0x1<<7)
-+#define BIT_TICK		(0x1<<8)
-+#define BIT_WDT			(0x1<<9)
-+#define BIT_TIMER0		(0x1<<10)
-+#define BIT_TIMER1		(0x1<<11)
-+#define BIT_TIMER2		(0x1<<12)
-+#define BIT_TIMER3		(0x1<<13)
-+#define BIT_TIMER4		(0x1<<14)
-+#define BIT_UART2		(0x1<<15)
-+#define BIT_LCD			(0x1<<16)
-+#define BIT_DMA0		(0x1<<17)
-+#define BIT_DMA1		(0x1<<18)
-+#define BIT_DMA2		(0x1<<19)
-+#define BIT_DMA3		(0x1<<20)
-+#define BIT_SDI			(0x1<<21)
-+#define BIT_SPI0		(0x1<<22)
-+#define BIT_UART1		(0x1<<23)
-+#define BIT_USBD		(0x1<<25)
-+#define BIT_USBH		(0x1<<26)
-+#define BIT_IIC			(0x1<<27)
-+#define BIT_UART0		(0x1<<28)
-+#define BIT_SPI1		(0x1<<29)
-+#define BIT_RTC			(0x1<<30)
-+#define BIT_ADC			(0x1<<31)
-+#define BIT_ALLMSK		(0xFFFFFFFF)
-+
-+#define ClearPending(bit) {\
-+		 rSRCPND = bit;\
-+		 rINTPND = bit;\
-+		 rINTPND;\
-+		 }
-+/* Wait until rINTPND is changed for the case that the ISR is very short. */
-+
-+#define __REG(x)	(*(volatile unsigned long *)(x))
-+#define __REGl(x)	(*(volatile unsigned long *)(x))
-+#define __REGw(x)	(*(volatile unsigned short *)(x))
-+#define __REGb(x)	(*(volatile unsigned char *)(x))
-+#define __REG2(x,y)	(*(volatile unsigned long *)((x) + (y)))
-+
-+/*
-+ *  * Nand flash controller
-+ *   */
-+
-+#define NFDATA8			(*(volatile unsigned char *)0x4E000010)
-+#define NFDATA16		(*(volatile unsigned short *)0x4E000010)
-+#define NFDATA32		(*(volatile unsigned *)0x4E000010)
-+
-+#define NFCONF                  __REG(0x4E000000)
-+#define NFCONT                  __REG(0x4E000004)
-+#define NFCMD                  __REG(0x4E000008)
-+#define NFADDR                  __REGb(0x4E00000C)
-+#define NFMECCD0                __REG(0x4E000014)
-+#define NFMECCD1                __REG(0x4E000018)
-+#define NFSECCD                 __REG(0x4E00001C)
-+#define NFSTAT                  __REG(0x4E000020)
-+#define NFESTAT0                __REG(0x4E000024)
-+#define NFESTAT1                __REG(0x4E000028)
-+#define NFMECC0                 __REG(0x4E00002C)
-+#define NFMECC1                 __REG(0x4E000030)
-+#define NFSECC                  __REG(0x4E000034)
-+#define NFSBLK                  __REG(0x4E000038)
-+
-+
-+#define S3C2410_MISCCR_USBDEV	    (0<<3)
-+#define S3C2410_MISCCR_USBHOST	    (1<<3)
-+
-+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
-+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
-+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
-+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
-+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
-+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
-+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
-+
-+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
-+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
-+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
-+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
-+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
-+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
-+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
-+
-+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
-+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
-+
-+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
-+
-+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
-+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)
-+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
-+
-+#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
-+#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
-+#define S3C2410_CLKSLOW_SLOW		(1<<4)
-+#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
-+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
-+
-+#endif /*__S3C2440_H__*/
-Index: u-boot/include/common.h
-===================================================================
---- u-boot.orig/include/common.h
-+++ u-boot/include/common.h
-@@ -454,7 +454,7 @@
- ulong	get_OPB_freq (void);
- ulong	get_PCI_freq (void);
- #endif
--#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X)
-+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || defined(CONFIG_LH7A40X)
- void	s3c2410_irq(void);
- #define ARM920_IRQ_CALLBACK s3c2410_irq
- ulong	get_FCLK (void);
-Index: u-boot/cpu/arm920t/s3c24x0/usb_ohci.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/usb_ohci.c
-+++ u-boot/cpu/arm920t/s3c24x0/usb_ohci.c
-@@ -44,6 +44,8 @@
- #include <s3c2400.h>
- #elif defined(CONFIG_S3C2410)
- #include <s3c2410.h>
-+#elif defined(CONFIG_S3C2440)
-+#include <s3c2440.h>
- #endif
- 
- #include <malloc.h>
-Index: u-boot/cpu/arm920t/s3c24x0/speed.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/speed.c
-+++ u-boot/cpu/arm920t/s3c24x0/speed.c
-@@ -30,12 +30,15 @@
-  */
- 
- #include <common.h>
--#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
-+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \
-+    defined (CONFIG_S3C2440) || defined (CONFIG_TRAB)
- 
- #if defined(CONFIG_S3C2400)
- #include <s3c2400.h>
- #elif defined(CONFIG_S3C2410)
- #include <s3c2410.h>
-+#elif defined(CONFIG_S3C2440)
-+#include <s3c2440.h>
- #endif
- 
- #define MPLL 0
-@@ -66,8 +69,12 @@
-     m = ((r & 0xFF000) >> 12) + 8;
-     p = ((r & 0x003F0) >> 4) + 2;
-     s = r & 0x3;
--
-+#ifndef CONFIG_S3C2440
-     return((CONFIG_SYS_CLK_FREQ * m) / (p << s));
-+#else
-+    /* To avoid integer overflow, changed the calc order */
-+    return( 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s )) );
-+#endif
- }
- 
- /* return FCLK frequency */
-@@ -81,7 +88,21 @@
- {
-     S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
- 
-+#ifndef CONFIG_S3C2440
-     return((clk_power->CLKDIVN & 0x2) ? get_FCLK()/2 : get_FCLK());
-+#else
-+    switch (clk_power->CLKDIVN & 0x6) {
-+        case 0x0:
-+	    return get_FCLK();
-+	case 0x2:
-+	    return get_FCLK()/2;
-+	case 0x4:
-+	    return (clk_power->CAMDIVN & 0x200) ? get_FCLK()/8 : get_FCLK()/4;
-+	case 0x6:
-+	    return (clk_power->CAMDIVN & 0x100) ? get_FCLK()/6 : get_FCLK()/3;
-+    }
-+    return 0;
-+#endif
- }
- 
- /* return PCLK frequency */
-@@ -98,4 +119,5 @@
-     return(get_PLLCLK(UPLL));
- }
- 
--#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
-+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) ||
-+          defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */
-Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c
-+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c
-@@ -30,13 +30,16 @@
-  */
- 
- #include <common.h>
--#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
-+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \
-+    defined(CONFIG_S3C2440) || defined (CONFIG_TRAB)
- 
- #include <arm920t.h>
- #if defined(CONFIG_S3C2400)
- #include <s3c2400.h>
- #elif defined(CONFIG_S3C2410)
- #include <s3c2410.h>
-+#elif defined(CONFIG_S3C2440)
-+#include <s3c2440.h>
- #endif
- 
- int timer_load_val = 0;
-@@ -59,6 +62,7 @@
- 	/* use PWM Timer 4 because it has no output */
- 	/* prescaler for Timer 4 is 16 */
- 	timers->TCFG0 = 0x0f00;
-+#ifndef CONFIG_S3C2440
- 	if (timer_load_val == 0)
- 	{
- 		/*
-@@ -68,6 +72,9 @@
- 		 */
- 		timer_load_val = get_PCLK()/(2 * 16 * 100);
- 	}
-+#else
-+	timer_load_val = get_PCLK()/(2 * 16 * 100);
-+#endif
- 	/* load value for 10 ms timeout */
- 	lastdec = timers->TCNTB4 = timer_load_val;
- 	/* auto load, manual update of Timer 4 */
-@@ -178,6 +185,7 @@
- 	tbclk = timer_load_val * 100;
- #elif defined(CONFIG_SBC2410X) || \
-       defined(CONFIG_SMDK2410) || \
-+      defined(CONFIG_SMDK2440) || \
-       defined(CONFIG_VCMA9)
- 	tbclk = CFG_HZ;
- #else
-@@ -232,4 +240,5 @@
- }
- #endif /* USE_IRQ */
- 
--#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
-+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) ||
-+	  defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */
-Index: u-boot/cpu/arm920t/s3c24x0/serial.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/serial.c
-+++ u-boot/cpu/arm920t/s3c24x0/serial.c
-@@ -19,12 +19,15 @@
-  */
- 
- #include <common.h>
--#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
-+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \
-+    defined(CONFIG_S3C2440) || defined (CONFIG_TRAB)
- 
- #if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
- #include <s3c2400.h>
- #elif defined(CONFIG_S3C2410)
- #include <s3c2410.h>
-+#elif defined(CONFIG_S3C2440)
-+#include <s3c2440.h>
- #endif
- 
- DECLARE_GLOBAL_DATA_PTR;
-@@ -180,4 +183,5 @@
- 	}
- }
- 
--#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
-+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) ||
-+	  defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */
-Index: u-boot/cpu/arm920t/s3c24x0/i2c.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/i2c.c
-+++ u-boot/cpu/arm920t/s3c24x0/i2c.c
-@@ -34,6 +34,8 @@
- #include <s3c2400.h>
- #elif defined(CONFIG_S3C2410)
- #include <s3c2410.h>
-+#elif defined(CONFIG_S3C2440)
-+#include <s3c2440.h>
- #endif
- #include <i2c.h>
- 
-@@ -63,7 +65,7 @@
- {
- 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- 
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	return (gpio->GPEDAT & 0x8000) >> 15;
- #endif
- #ifdef CONFIG_S3C2400
-@@ -82,7 +84,7 @@
- {
- 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- 
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
- #endif
- #ifdef CONFIG_S3C2400
-@@ -139,7 +141,7 @@
- 	}
- 
- 	if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 		ulong old_gpecon = gpio->GPECON;
- #endif
- #ifdef CONFIG_S3C2400
-@@ -147,7 +149,7 @@
- #endif
- 		/* bus still busy probably by (most) previously interrupted transfer */
- 
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 		/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
- 		gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
- #endif
-@@ -171,7 +173,7 @@
- 		udelay (1000);
- 
- 		/* restore pin functions */
--#ifdef CONFIG_S3C2410
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 		gpio->GPECON = old_gpecon;
- #endif
- #ifdef CONFIG_S3C2400
-Index: u-boot/drivers/usbdcore_s3c2410.c
-===================================================================
---- u-boot.orig/drivers/usbdcore_s3c2410.c
-+++ u-boot/drivers/usbdcore_s3c2410.c
-@@ -24,7 +24,7 @@
- 
- #include <config.h>
- 
--#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE)
-+#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) && defined(CONFIG_USB_DEVICE)
- 
- #include <common.h>
- 
-Index: u-boot/drivers/usbtty.h
-===================================================================
---- u-boot.orig/drivers/usbtty.h
-+++ u-boot/drivers/usbtty.h
-@@ -29,7 +29,7 @@
- #include "usbdcore_mpc8xx.h"
- #elif defined(CONFIG_OMAP1510)
- #include "usbdcore_omap1510.h"
--#elif defined(CONFIG_S3C2410)
-+#elif defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- #include "usbdcore_s3c2410.h"
- #endif
- 
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -31,7 +31,11 @@
- 
- #include <config.h>
- #include <version.h>
-+#if defined(CONFIG_S3C2410)
- #include <s3c2410.h>
-+#elif defined(CONFIG_S3C2440)
-+#include <s3c2440.h>
-+#endif
- 
- 
- /*
-@@ -142,14 +146,32 @@
- # define pWTCON		0x15300000
- # define INTMSK		0x14400008	/* Interupt-Controller base addresses */
- # define CLKDIVN	0x14800014	/* clock divisor register */
--#elif defined(CONFIG_S3C2410)
-+#elif defined(CONFIG_S3C2410) || defined (CONFIG_S3C2440)
- # define pWTCON		0x53000000
- # define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
- # define INTSUBMSK	0x4A00001C
- # define CLKDIVN	0x4C000014	/* clock divisor register */
- #endif
- 
--#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
-+#if defined(CONFIG_S3C2410)
-+# define INTSUBMSK_val	0x7ff
-+# define MPLLCON_val	((0x90 << 12) + (0x7 << 4) + 0x0)	/* 202 MHz */
-+# define UPLLCON_val	((0x78 << 12) + (0x2 << 4) + 0x3)
-+# define CLKDIVN_val	3 /* FCLK:HCLK:PCLK = 1:2:4 */
-+#elif defined(CONFIG_S3C2440)
-+# define INTSUBMSK_val	0xffff
-+#if (CONFIG_SYS_CLK_FREQ == 16934400)
-+# define MPLLCON_val	((0x61 << 12) + (0x1 << 4) + 0x2)	/* 296.35 MHz */
-+# define UPLLCON_val	((0x3c << 12) + (0x4 << 4) + 0x2)	/*  47.98 MHz */
-+#else if (CONFIG_SYS_CLK_FREQ == 12000000)
-+# define MPLLCON_val	((0x44 << 12) + (0x1 << 4) + 0x1)	/* 304.00 MHz */
-+# define UPLLCON_val	((0x38 << 12) + (0x2 << 4) + 0x2)	/*  48.00 MHz */
-+#endif
-+# define CLKDIVN_val	7 /* FCLK:HCLK:PCLK = 1:3:6 */
-+# define CAMDIVN	0x4C000018
-+#endif
-+
-+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	ldr     r0, =pWTCON
- 	mov     r1, #0x0
- 	str     r1, [r0]
-@@ -160,24 +182,34 @@
- 	mov	r1, #0xffffffff
- 	ldr	r0, =INTMSK
- 	str	r1, [r0]
--# if defined(CONFIG_S3C2410)
--	ldr	r1, =0x3ff
-+# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
-+	ldr	r1, =INTSUBMSK_val
- 	ldr	r0, =INTSUBMSK
- 	str	r1, [r0]
- # endif
- 
--	/* default FCLK is 202 MHz ! */
-+#if defined(CONFIG_S3C2440)
-+	/* Make sure we get FCLK:HCLK:PCLK = 1:3:6 */
-+	ldr	r0, =CAMDIVN
-+	mov	r1, #0
-+	str	r1, [r0]
-+#endif
-+
-+	/* Clock asynchronous mode */
-+	mrc	p15, 0, r1, c1, c0, 0
-+	orr	r1, r1, #0xc0000000
-+	mcr	p15, 0, r1, c1, c0, 0
-+
-+
- #define LOCKTIME	0x4c000000
- #define UPLLCON		0x4c000008
--//#define MPLLCFG		((0x90 << 12) + (0x2 << 4) + 0x2)
--#define MPLLCFG		((0x90 << 12) + (0x7 << 4) + 0x0)
--#define UPLLCFG		((0x78 << 12) + (0x2 << 4) + 0x3)
-+
- 	ldr	r0, =LOCKTIME
- 	mov	r1, #0xffffff
- 	str	r1, [r0]
- 
- 	ldr	r0, =UPLLCON
--	ldr	r1, =UPLLCFG
-+	ldr	r1, =UPLLCON_val
- 	str	r1, [r0]
- 
- 	/* Page 7-19, seven nops between UPLL and MPLL */
-@@ -189,12 +221,12 @@
- 	nop
- 	nop
- 
--	ldr	r1, =MPLLCFG
-+	ldr	r1, =MPLLCON_val
- 	str	r1, [r0, #-4]		/* MPLLCON */
- 
- 	/* FCLK:HCLK:PCLK = 1:2:4 */
- 	ldr	r0, =CLKDIVN
--	mov	r1, #3
-+	mov	r1, #CLKDIVN_val
- 	str	r1, [r0]
- 
- #if 1
-@@ -222,7 +254,7 @@
- 	str	r1, [r0, #0x28]
- #endif
- 
--#endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 */
-+#endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 */
- 
- #ifndef CONFIG_SKIP_LOWLEVEL_INIT
- #ifndef CONFIG_LL_INIT_NAND_ONLY
-@@ -279,7 +311,7 @@
- #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY)
- 	bl	cpu_init_crit
- #endif
--#if defined(CONFIG_S3C2410)
-+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- 	/* ensure some refresh has happened */
- 	ldr	r1, =0xfffff
- 1:	subs	r1, r1, #1
-@@ -290,11 +322,12 @@
- 	ldr	r0, [ r1 ]
- 	tst	r0, #0x02		/* is this resume from power down */
- 	ldrne	pc, [r1, #4]		/* gstatus3 */
--#endif /* CONFIG_S3C2410 */
-+#endif /* CONFIG_S3C2410 || CONFIG_S3C2440 */
- #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
- 
- 	/* mov	r10, lr */
- 
-+#if defined(CONFIG_S3C2410)
- 	@ reset NAND
- 	mov	r1, #S3C2410_NAND_BASE
- 	ldr	r2, =0xf842		@ initial value enable tacls=3,rph0=6,rph1=0
-@@ -314,6 +347,17 @@
- 	ldr	r2, [r1, #oNFCONF]
- 	orr	r2, r2, #0x800		@ disable chip
- 	str	r2, [r1, #oNFCONF]
-+#elif defined(CONFIG_S3C2440)
-+	mov	r1, #S3C2440_NAND_BASE
-+	ldr	r2, =0xfff0		@ initial value tacls=3,rph0=7,rph1=7
-+	ldr	r3, [r1, #oNFCONF]
-+	orr	r3, r3, r2
-+	str	r3, [r1, #oNFCONF]
-+
-+	ldr	r3, [r1, #oNFCONT]
-+	orr	r3, r3, #1		@ enable nand controller
-+	str	r3, [r1, #oNFCONT]
-+#endif
- 
- #if 0
- 	@ get ready to call C functions (for nand_read())
-@@ -382,7 +426,7 @@
- #endif /* CONFIG_S3C2410_NAND_BOOT */
- done_relocate:
- 
--#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C2410)
-+#if defined(CONFIG_USE_IRQ) && (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440))
- 	/* In the case of the S3C2410, if we've somehow magically (JTAG, ...)
- 	   ended up in RAM, then that ram is mapped to 0x30000000 and not 0.
- 	   So we need to copy the interrupt vectors, etc.  */
-Index: u-boot/cpu/arm920t/s3c24x0/nand_read.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/nand_read.c
-+++ u-boot/cpu/arm920t/s3c24x0/nand_read.c
-@@ -16,30 +16,141 @@
-  */
- 
- #include <common.h>
-+#include <linux/mtd/nand.h>
- 
- #ifdef CONFIG_S3C2410_NAND_BOOT
- 
- #define __REGb(x)	(*(volatile unsigned char *)(x))
-+#define __REGw(x)	(*(volatile unsigned short *)(x))
- #define __REGi(x)	(*(volatile unsigned int *)(x))
- #define NF_BASE		0x4e000000
-+#if defined(CONFIG_S3C2410)
- #define NFCONF		__REGi(NF_BASE + 0x0)
- #define NFCMD		__REGb(NF_BASE + 0x4)
- #define NFADDR		__REGb(NF_BASE + 0x8)
- #define NFDATA		__REGb(NF_BASE + 0xc)
- #define NFSTAT		__REGb(NF_BASE + 0x10)
-+#define NFSTAT_BUSY	1
-+#define nand_select()	(NFCONF &= ~0x800)
-+#define nand_deselect()	(NFCONF |= 0x800)
-+#define nand_clear_RnB()	do {} while (0)
-+#elif defined(CONFIG_S3C2440)
-+#define NFCONF		__REGi(NF_BASE + 0x0)
-+#define NFCONT		__REGi(NF_BASE + 0x4)
-+#define NFCMD		__REGb(NF_BASE + 0x8)
-+#define NFADDR		__REGb(NF_BASE + 0xc)
-+#define NFDATA		__REGb(NF_BASE + 0x10)
-+#define NFDATA16	__REGw(NF_BASE + 0x10)
-+#define NFSTAT		__REGb(NF_BASE + 0x20)
-+#define NFSTAT_BUSY	1
-+#define nand_select()	(NFCONT &= ~(1 << 1))
-+#define nand_deselect()	(NFCONT |= (1 << 1))
-+#define nand_clear_RnB()	(NFSTAT |= (1 << 2))
-+#endif
- 
--#define BUSY 1
--inline void wait_idle(void)
-+static inline void nand_wait(void)
- {
- 	int i;
- 
--	while (!(NFSTAT & BUSY))
-+	while (!(NFSTAT & NFSTAT_BUSY))
- 		for (i=0; i<10; i++);
- }
- 
--#define NAND_SECTOR_SIZE	512
--#define NAND_BLOCK_MASK		(NAND_SECTOR_SIZE - 1)
--#define NAND_PAGE_SIZE		0x4000
-+#if defined(CONFIG_S3C2410)
-+/* configuration for 2410 with 512byte sized flash */
-+#define NAND_PAGE_SIZE		512
-+#define BAD_BLOCK_OFFSET	517
-+#define NAND_BLOCK_MASK		(NAND_PAGE_SIZE - 1)
-+#define NAND_BLOCK_SIZE		0x4000
-+#else
-+/* configuration for 2440 with 2048byte sized flash */
-+#define NAND_5_ADDR_CYCLE
-+#define NAND_PAGE_SIZE		2048
-+#define BAD_BLOCK_OFFSET	NAND_PAGE_SIZE
-+#define	NAND_BLOCK_MASK		(NAND_PAGE_SIZE - 1)
-+#define NAND_BLOCK_SIZE		(NAND_PAGE_SIZE * 64)
-+#endif
-+
-+/* compile time failure in case of an invalid configuration */
-+#if defined(CONFIG_S3C2410) && (NAND_PAGE_SIZE != 512)
-+#error "S3C2410 does not support nand page size != 512"
-+#endif
-+
-+static int is_bad_block(unsigned long i)
-+{
-+	unsigned char data;
-+	unsigned long page_num;
-+
-+	/* FIXME: do this twice, for first and second page in block */
-+
-+	nand_clear_RnB();
-+#if (NAND_PAGE_SIZE == 512)
-+	NFCMD = NAND_CMD_READOOB; /* 0x50 */
-+	NFADDR = BAD_BLOCK_OFFSET & 0xf;
-+	NFADDR = (i >> 9) & 0xff;
-+	NFADDR = (i >> 17) & 0xff;
-+	NFADDR = (i >> 25) & 0xff;
-+#elif (NAND_PAGE_SIZE == 2048)
-+	page_num = i >> 11; /* addr / 2048 */
-+	NFCMD = NAND_CMD_READ0;
-+	NFADDR = BAD_BLOCK_OFFSET & 0xff;
-+	NFADDR = (BAD_BLOCK_OFFSET >> 8) & 0xff;
-+	NFADDR = page_num & 0xff;
-+	NFADDR = (page_num >> 8) & 0xff;
-+	NFADDR = (page_num >> 16) & 0xff;
-+	NFCMD = NAND_CMD_READSTART;
-+#endif
-+	nand_wait();
-+	data = (NFDATA & 0xff);
-+	if (data != 0xff)
-+		return 1;
-+
-+	return 0;
-+}
-+
-+static int nand_read_page_ll(unsigned char *buf, unsigned long addr)
-+{
-+	unsigned short *ptr16 = (unsigned short *)buf;
-+	unsigned int i, page_num;
-+
-+	nand_clear_RnB();
-+
-+	NFCMD = NAND_CMD_READ0;
-+
-+#if (NAND_PAGE_SIZE == 512)
-+	/* Write Address */
-+	NFADDR = addr & 0xff;
-+	NFADDR = (addr >> 9) & 0xff;
-+	NFADDR = (addr >> 17) & 0xff;
-+	NFADDR = (addr >> 25) & 0xff;
-+#elif (NAND_PAGE_SIZE == 2048)
-+	page_num = addr >> 11; /* addr / 2048 */
-+	/* Write Address */
-+	NFADDR = 0;
-+	NFADDR = 0;
-+	NFADDR = page_num & 0xff;
-+	NFADDR = (page_num >> 8) & 0xff;
-+	NFADDR = (page_num >> 16) & 0xff;
-+	NFCMD = NAND_CMD_READSTART;
-+#else
-+#error "unsupported nand page size"
-+#endif
-+	nand_wait();
-+
-+#if defined(CONFIG_S3C2410)
-+	for (i = 0; i < NAND_PAGE_SIZE; i++) {
-+		*buf = (NFDATA & 0xff);
-+		buf++;
-+	}
-+#elif defined(CONFIG_S3C2440)
-+	for (i = 0; i < NAND_PAGE_SIZE/2; i++) {
-+		*ptr16 = NFDATA16;
-+		ptr16++;
-+	}
-+#endif
-+
-+	return NAND_PAGE_SIZE;
-+}
- 
- /* low level nand read function */
- int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size)
-@@ -50,47 +161,28 @@
- 		return -1;	/* invalid alignment */
- 
- 	/* chip Enable */
--	NFCONF &= ~0x800;
-+	nand_select();
-+	nand_clear_RnB();
- 	for (i=0; i<10; i++);
- 
- 	for (i=start_addr; i < (start_addr + size);) {
- #ifdef CONFIG_S3C2410_NAND_SKIP_BAD
--		if (start_addr % NAND_PAGE_SIZE == 0) {
--			unsigned char data;
--			NFCMD = 0x50;
--			NFADDR = 517&0xf;
--			NFADDR = (i >> 9) & 0xff;
--			NFADDR = (i >> 17) & 0xff;
--			NFADDR = (i >> 25) & 0xff;
--			wait_idle();
--			data = (NFDATA & 0xff);
--			if (data != 0xff) {
-+		if (start_addr % NAND_BLOCK_SIZE == 0) {
-+			if (is_bad_block(i)) {
- 				/* Bad block */
--				i += NAND_PAGE_SIZE;
--				size += NAND_PAGE_SIZE;
-+				i += NAND_BLOCK_SIZE;
-+				size += NAND_BLOCK_SIZE;
- 				continue;
- 			}
- 		}
- #endif
--		/* READ0 */
--		NFCMD = 0;
--
--		/* Write Address */
--		NFADDR = i & 0xff;
--		NFADDR = (i >> 9) & 0xff;
--		NFADDR = (i >> 17) & 0xff;
--		NFADDR = (i >> 25) & 0xff;
--
--		wait_idle();
--
--		for (j=0; j < NAND_SECTOR_SIZE; j++, i++) {
--			*buf = (NFDATA & 0xff);
--			buf++;
--		}
-+		j = nand_read_page_ll(buf, i);
-+		i += j;
-+		buf += j;
- 	}
- 
- 	/* chip Disable */
--	NFCONF |= 0x800;	/* chip disable */
-+	nand_deselect();
- 
- 	return 0;
- }
-Index: u-boot/cpu/arm920t/s3c24x0/nand.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c
-+++ u-boot/cpu/arm920t/s3c24x0/nand.c
-@@ -36,24 +36,54 @@
- #define __REGi(x)	(*(volatile unsigned int *)(x))
- 
- #define	NF_BASE		0x4e000000
-+
- #define	NFCONF		__REGi(NF_BASE + 0x0)
--#define	NFCMD		__REGb(NF_BASE + 0x4)
--#define	NFADDR		__REGb(NF_BASE + 0x8)
--#define	NFDATA		__REGb(NF_BASE + 0xc)
--#define	NFSTAT		__REGb(NF_BASE + 0x10)
-+
-+#if defined(CONFIG_S3C2410)
-+
-+#define oNFCMD		0x4
-+#define	oNFADDR		0x8
-+#define oNFDATA		0xc
-+#define oNFSTAT		0x10
- #define NFECC0		__REGb(NF_BASE + 0x14)
- #define NFECC1		__REGb(NF_BASE + 0x15)
- #define NFECC2		__REGb(NF_BASE + 0x16)
-+#define NFCONF_nFCE	(1<<11)
- 
- #define S3C2410_NFCONF_EN          (1<<15)
- #define S3C2410_NFCONF_512BYTE     (1<<14)
- #define S3C2410_NFCONF_4STEP       (1<<13)
- #define S3C2410_NFCONF_INITECC     (1<<12)
--#define S3C2410_NFCONF_nFCE        (1<<11)
- #define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
- #define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
- #define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
- 
-+#elif defined(CONFIG_S3C2440)
-+
-+#define oNFCMD		0x8
-+#define oNFADDR		0xc
-+#define oNFDATA		0x10
-+#define oNFSTAT		0x20
-+
-+#define	NFCONT		__REGi(NF_BASE + 0x04)
-+#define	NFMECC0		__REGi(NF_BASE + 0x2C)
-+#define NFCONF_nFCE	(1<<1)
-+#define S3C2440_NFCONF_INITECC		(1<<4)
-+#define S3C2440_NFCONF_MAINECCLOCK	(1<<5)
-+#define nand_select()		(NFCONT &= ~(1 << 1))
-+#define nand_deselect()		(NFCONT |= (1 << 1))
-+#define nand_clear_RnB()	(NFSTAT |= (1 << 2))
-+#define nand_detect_RB()	{ while(!(NFSTAT&(1<<2))); }
-+#define nand_wait()		{ while(!(NFSTAT & 0x4)); } /* RnB_TransDectect */
-+
-+#endif
-+
-+#define	NFCMD		__REGb(NF_BASE + oNFCMD)
-+#define	NFADDR		__REGb(NF_BASE + oNFADDR)
-+#define	NFDATA		__REGb(NF_BASE + oNFDATA)
-+#define	NFSTAT		__REGb(NF_BASE + oNFSTAT)
-+
-+
- static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
- {
- 	struct nand_chip *chip = mtd->priv;
-@@ -62,23 +92,31 @@
- 
- 	switch (cmd) {
- 	case NAND_CTL_SETNCE:
--		NFCONF &= ~S3C2410_NFCONF_nFCE;
-+#if defined(CONFIG_S3C2410)
-+		NFCONF &= ~NFCONF_nFCE;
-+#elif defined(CONFIG_S3C2440)
-+		NFCONT &= ~NFCONF_nFCE;
-+#endif
- 		DEBUGN("NFCONF=0x%08x\n", NFCONF);
- 		break;
- 	case NAND_CTL_CLRNCE:
--		NFCONF |= S3C2410_NFCONF_nFCE;
-+#if defined(CONFIG_S3C2410)
-+		NFCONF |= NFCONF_nFCE;
-+#elif defined(CONFIG_S3C2440)
-+		NFCONT &= ~NFCONF_nFCE;
-+#endif
- 		DEBUGN("NFCONF=0x%08x\n", NFCONF);
- 		break;
- 	case NAND_CTL_SETALE:
--		chip->IO_ADDR_W = NF_BASE + 0x8;
-+		chip->IO_ADDR_W = NF_BASE + oNFADDR;
- 		DEBUGN("SETALE\n");
- 		break;
- 	case NAND_CTL_SETCLE:
--		chip->IO_ADDR_W = NF_BASE + 0x4;
-+		chip->IO_ADDR_W = NF_BASE + oNFCMD;
- 		DEBUGN("SETCLE\n");
- 		break;
- 	default:
--		chip->IO_ADDR_W = NF_BASE + 0xc;
-+		chip->IO_ADDR_W = NF_BASE + oNFDATA;
- 		break;
- 	}
- 	return;
-@@ -180,16 +218,21 @@
- 	/* initialize hardware */
- 	twrph0 = 3; twrph1 = 0; tacls = 0;
- 
-+#if defined(CONFIG_S3C2410)
- 	cfg = S3C2410_NFCONF_EN;
- 	cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
- 	cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
- 	cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
- 
- 	NFCONF = cfg;
--	//NFCONF = 0xf842;
-+#elif defined(CONFIG_S3C2440)
-+	twrph0 = 7; twrph1 = 7; tacls = 7;
-+	NFCONF = (tacls<<12)|(twrph0<<8)|(twrph1<<4)|(0<<0);
-+	NFCONT = (0<<13)|(0<<12)|(0<<10)|(0<<9)|(0<<8)|(1<<6)|(1<<5)|(1<<4)|(1<<1)|(1<<0);
-+#endif
- 
- 	/* initialize nand_chip data structure */
--	nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
-+	nand->IO_ADDR_R = nand->IO_ADDR_W = NF_BASE + oNFDATA;
- 
- 	/* read_buf and write_buf are default */
- 	/* read_byte and write_byte are default */
-@@ -214,12 +257,23 @@
- 	nand->options = 0;
- #endif
- 
-+#if defined(CONFIG_S3C2440)
-+/*
-+	nand_select();
-+	nand_clear_RnB();
-+	NFCMD = NAND_CMD_RESET;
-+	{ volatile int i; for (i = 0; i < 10; i ++); }
-+	nand_detect_RB();
-+	nand_deselect();
-+*/
-+#endif
-+
- 	DEBUGN("end of nand_init\n");
- 
- 	return 0;
- }
- 
- #else
-- #error "U-Boot legacy NAND support not available for S3C2410"
-+ #error "U-Boot legacy NAND support not available for S3C24xx"
- #endif
- #endif
-Index: u-boot/cpu/arm920t/s3c24x0/mmc.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/mmc.c
-+++ u-boot/cpu/arm920t/s3c24x0/mmc.c
-@@ -137,6 +137,9 @@
- 	dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART;
- 	if (wide)
- 		dcon |= S3C2410_SDIDCON_WIDEBUS;
-+#if defined(CONFIG_S3C2440)
-+	dcon |= S3C2440_SDIDCON_DS_WORD | S3C2440_SDIDCON_DATSTART;
-+#endif
- 	sdi->SDIDCON = dcon;
- 
- 	/* send read command */
-@@ -394,13 +397,18 @@
- 
- 	clk_power->CLKCON |= (1 << 9);
- 
-+	sdi->SDIBSIZE = 512;
-+#if defined(CONFIG_S3C2410)
- 	/* S3C2410 has some bug that prevents reliable operation at higher speed */
- 	//sdi->SDIPRE = 0x3e;  /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
--	sdi->SDIPRE = 0x02;  /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
--	sdi->SDIBSIZE = 512;
-+	sdi->SDIPRE = 0x02;  /* 2410: SDCLK = PCLK/2 / (SDIPRE+1) = 11MHz */
- 	sdi->SDIDTIMER = 0xffff;
-+#elif defined(CONFIG_S3C2440)
-+	sdi->SDIPRE = 0x05;  /* 2410: SDCLK = PCLK / (SDIPRE+1) = 11MHz */
-+	sdi->SDIDTIMER = 0x7fffff;
-+#endif
- 	sdi->SDIIMSK = 0x0;
--	sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK;
-+	sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2410_SDICON_CLOCKTYPE;
- 	udelay(125000); /* FIXME: 74 SDCLK cycles */
- 
- 	mmc_csd.c_size = 0;
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2443.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2443.patch
deleted file mode 100644
index b2e94d4428..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-s3c2443.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -35,6 +35,8 @@
- #include <s3c2410.h>
- #elif defined(CONFIG_S3C2440)
- #include <s3c2440.h>
-+#elif defined(CONFIG_S3C2443)
-+#include <s3c2443.h>
- #endif
- 
- 
-@@ -164,9 +166,15 @@
- # define UPLLCON_val	((0x3c << 12) + (0x4 << 4) + 0x2)
- # define CLKDIVN_val	7 /* FCLK:HCLK:PCLK = 1:3:6 */
- # define CAMDIVN	0x4C000018
-+#elif defined(CONFIG_S3C2443)
-+# define INTSUBMSK_val	0x1fffffff
-+# define EPLLCON_val	((40 << 16) | (1 << 8) | (1))		/* 96 MHz */
-+# define MPLLCON_val	((81 << 16) | (2 << 8) | (0))		/* 1068 MHz */
-+# define CLKDIV0_val	((8 << 9) | (1 << 4) | (1 << 3) | (1 << 2)
- #endif
- 
--#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
-+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || \
-+    defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443)
- 	ldr     r0, =pWTCON
- 	mov     r1, #0x0
- 	str     r1, [r0]
-@@ -177,7 +185,7 @@
- 	mov	r1, #0xffffffff
- 	ldr	r0, =INTMSK
- 	str	r1, [r0]
--# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
-+# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443)
- 	ldr	r1, =INTSUBMSK_val
- 	ldr	r0, =INTSUBMSK
- 	str	r1, [r0]
-@@ -196,6 +204,43 @@
- 	mcr	p15, 0, r1, c1, c0, 0
- 
- 
-+#if defined(CONFIG_S3C2443)
-+#define LOCKCON0	0x4c000000
-+#define LOCKCON1	0x4c000004
-+#define MPLLCON		0x4c000010
-+#define EPLLCON		0x4c000018
-+
-+	ldr	r0, =CLKDIV0
-+	ldr	r1, =CLKDIV0_val
-+	str	r1, [r0]
-+
-+	/* set safe (way too long) locktime for both PLLs */
-+	ldr	r0, =LOCKCON0
-+	mov	r1, #0xffffff
-+	str	r1, [r0]
-+	ldr	r0, =LOCKCON1
-+	str	r1, [r0]
-+
-+	/* configure MPLL */
-+	ldr	r0, =MPLLCON
-+	ldr	r1, =MPLLCON_val
-+	str	r1, [r0]
-+
-+	/* select MPLL clock out for SYSCLK */
-+	ldr	r0, =CLKSRC
-+	ldr	r1, [r0]
-+	orr	r1, r1, #0x10
-+	str	r1, [r0]
-+
-+#if 0
-+	/* configure EPLL */
-+	ldr	r0, =EPLLCON
-+	ldr	r1, =EPLLCON_val
-+	str	r1, [r0]
-+#endif
-+
-+
-+#else /* i.e. 2440, 2410 and 2440 */
- #define LOCKTIME	0x4c000000
- #define UPLLCON		0x4c000008
- 
-@@ -223,6 +268,7 @@
- 	ldr	r0, =CLKDIVN
- 	mov	r1, #CLKDIVN_val
- 	str	r1, [r0]
-+#endif
- 
- #if 1
- 	/* enable uart */
-@@ -249,7 +295,7 @@
- 	str	r1, [r0, #0x28]
- #endif
- 
--#endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 */
-+#endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 || CONFIG_S3C2443 */
- 
- #ifndef CONFIG_SKIP_LOWLEVEL_INIT
- #ifndef CONFIG_LL_INIT_NAND_ONLY
-Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c
-+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c
-@@ -31,7 +31,8 @@
- 
- #include <common.h>
- #if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \
--    defined(CONFIG_S3C2440) || defined (CONFIG_TRAB)
-+    defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443) || \
-+    defined (CONFIG_TRAB)
- 
- #include <arm920t.h>
- #if defined(CONFIG_S3C2400)
-@@ -40,6 +41,8 @@
- #include <s3c2410.h>
- #elif defined(CONFIG_S3C2440)
- #include <s3c2440.h>
-+#elif defined(CONFIG_S3C2443)
-+#include <s3c2443.h>
- #endif
- 
- int timer_load_val = 0;
-@@ -186,6 +189,7 @@
- #elif defined(CONFIG_SBC2410X) || \
-       defined(CONFIG_SMDK2410) || \
-       defined(CONFIG_SMDK2440) || \
-+      defined(CONFIG_SMDK2443) || \
-       defined(CONFIG_VCMA9)
- 	tbclk = CFG_HZ;
- #else
-Index: u-boot/drivers/usbdcore_s3c2410.c
-===================================================================
---- u-boot.orig/drivers/usbdcore_s3c2410.c
-+++ u-boot/drivers/usbdcore_s3c2410.c
-@@ -24,7 +24,8 @@
- 
- #include <config.h>
- 
--#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) && defined(CONFIG_USB_DEVICE)
-+#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || \
-+     defined(CONFIG_S3C2443)) && defined(CONFIG_USB_DEVICE)
- 
- #include <common.h>
- 
-Index: u-boot/include/s3c2443.h
-===================================================================
---- /dev/null
-+++ u-boot/include/s3c2443.h
-@@ -0,0 +1,106 @@
-+/*
-+ * (C) Copyright 2007 Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __S3C2443_H
-+#define __S3C2443_H
-+
-+#include <s3c24x0.h>
-+
-+/* CLOCK & POWER MANAGEMENT (see S3C2443 manual chapter 2) */
-+typedef struct {
-+	S3C24X0_REG32	LOCKCON0;
-+	S3C24X0_REG32	LOCKCON1;
-+	S3C24X0_REG32	OSCSET;
-+	S3C24X0_REG32	res1;
-+	S3C24X0_REG32	MPLLCON;
-+	S3C24X0_REG32	res2;
-+	S3C24X0_REG32	EPLLCON;
-+	S3C24X0_REG32	res3;
-+	S3C24X0_REG32	CLKSRC;
-+	S3C24X0_REG32	CLKDIV0;
-+	S3C24X0_REG32	CLKDIV1;
-+	S3C24X0_REG32	res4;
-+	S3C24X0_REG32	HCLKCON;
-+	S3C24X0_REG32	PCLKCON;
-+	S3C24X0_REG32	SCLKCON;
-+	S3C24X0_REG32	res5;
-+	S3C24X0_REG32	PWRMODE;
-+	S3C24X0_REG32	SWRST;
-+	S3C24X0_REG32	res6[2];
-+	S3C24X0_REG32	BUSPRI0;
-+	S3C24X0_REG32	res7[3];
-+} /*__attribute__((__packed__))*/ S3C2443_CLOCK_POWER;
-+
-+/* NAND FLASH (see S3C2443 manual chapter 7) */
-+typedef struct {
-+	S3C24X0_REG32	NFCONF;
-+	S3C24X0_REG32	NFCONT;
-+	S3C24X0_REG32	NFCMD;
-+	S3C24X0_REG32	NFADDR;
-+	S3C24X0_REG32	NFDATA;
-+	S3C24X0_REG32	NFMECCD0;
-+	S3C24X0_REG32	NFMECCD1;
-+	S3C24X0_REG32	NFSECCD;
-+	S3C24X0_REG32	NFSBLK;
-+	S3C24X0_REG32	NFEBLK;
-+	S3C24X0_REG32	NFSTAT;
-+	S3C24X0_REG32	NFECCERR0;
-+	S3C24X0_REG32	NFECCERR1;
-+	S3C24X0_REG32	NFMECC0;
-+	S3C24X0_REG32	NFMECC1;
-+	S3C24X0_REG32	NFSECC;
-+	S3C24X0_REG32	NFMLCBITPT;
-+} /*__attribute__((__packed__))*/ S3C2443_NAND;
-+
-+/* STATIC MEMORY (see S3C2443 manual chapter 5) */
-+struct s3c2443_sm_bank {
-+	S3C24X0_REG32	SMBIDCYR;
-+	S3C24X0_REG32	SMBWSTRDR;
-+	S3C24X0_REG32	SMBWSTWRR;
-+	S3C24X0_REG32	SMBWSTOENR;
-+	S3C24X0_REG32	SMBWSTWENR;
-+	S3C24X0_REG32	SMBCR;
-+	S3C24X0_REG32	SMBSR;
-+	S3C24X0_REG32	SMBWSTBRDR;
-+};
-+
-+typedef struct {
-+	struct s3c2443_sm_bank bank[5];	/* 0x4f000000..0x4f0000bf */
-+	S3C24X0_REG32	res[0x40];	/* 0x4f0000c0..0x4f0000ff */
-+	S3C24X0_REG32	SMBONETYPER;
-+	S3C24X0_REG32	SMCSR;
-+	S3C24X0_REG32	SMCCR;
-+} /*__attribute__((__packed__))*/ S3C2443_SMEM;
-+
-+
-+/* MOBILE DRAM (see S3C2443 manual chapter 6) */
-+typedef struct {
-+	S3C24X0_REG32	BANKCFG;
-+	S3C24X0_REG32	BANKCON1;
-+	S3C24X0_REG32	BANKCON2;
-+	S3C24X0_REG32	BANKCON3;
-+	S3C24X0_REG32	REFRESH;
-+	S3C24X0_REG32	TIMEOUT;
-+} /*__attribute__((__packed__))*/ S3C2443_MDRAM
-+
-+#endif /* __S3C2443_H */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-smdk2440.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-smdk2440.patch
deleted file mode 100644
index 25d34de66a..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-smdk2440.patch
+++ /dev/null
@@ -1,1481 +0,0 @@
-Add support for the Samsung SMDK2440 development board
-
-Index: u-boot/Makefile
-===================================================================
---- u-boot.orig/Makefile
-+++ u-boot/Makefile
-@@ -2035,6 +2035,9 @@
- smdk2410_config	:	unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
- 
-+smdk2440_config :	unconfig
-+	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2440 NULL s3c24x0
-+
- SX1_config :		unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm925t sx1
- 
-Index: u-boot/include/configs/smdk2440.h
-===================================================================
---- /dev/null
-+++ u-boot/include/configs/smdk2440.h
-@@ -0,0 +1,296 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ * Gary Jennejohn <gj@denx.de>
-+ * David Mueller <d.mueller@elsoft.ch>
-+ *
-+ * Configuation settings for the SAMSUNG SMDK2440 board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#if 0
-+/* If we want to start u-boot from usb bootloader in NOR flash */
-+#define CONFIG_SKIP_RELOCATE_UBOOT	1
-+#define	CONFIG_SKIP_LOWLEVEL_INIT	1
-+#else
-+/* If we want to start u-boot directly from within NAND flash */
-+#define CONFIG_LL_INIT_NAND_ONLY
-+#define CONFIG_S3C2410_NAND_BOOT	1
-+#define CONFIG_S3C2410_NAND_SKIP_BAD	1
-+#endif
-+
-+#define CFG_UBOOT_SIZE		0x40000 /* size of u-boot, for NAND loading */
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_S3C2440		1	/* in a SAMSUNG S3C2440 SoC     */
-+#define CONFIG_SMDK2440		1	/* on a SAMSUNG SMDK2440 Board  */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ	16934400/* SMDK2440 has 16.9344MHz input clock */
-+
-+
-+#define USE_920T_MMU		1
-+#define CONFIG_USE_IRQ		1
-+//#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 2048*1024)
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
-+#define CS8900_BASE		0x19000300
-+#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1          1	/* we use SERIAL 1 on SMDK2440 */
-+#define CONFIG_HWFLOW		1
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define	CONFIG_RTC_S3C24X0	1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE		115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS \
-+			(CONFIG_CMD_DFL	 | \
-+			/*CFG_CMD_BSP	 | */ \
-+			CFG_CMD_CACHE	 | \
-+			CFG_CMD_DATE	 | \
-+			/*CFG_CMD_DHCP	 | */ \
-+			CFG_CMD_DIAG	 | \
-+			CFG_CMD_ELF	 | \
-+			CFG_CMD_EXT2	 | \
-+			CFG_CMD_FAT	 | \
-+			/*CFG_CMD_HWFLOW	 | */ \
-+			/* CFG_CMD_IDE	 | */ \
-+			/* CFG_CMD_IRQ	 | */ \
-+			CFG_CMD_JFFS2	 | \
-+			CFG_CMD_MMC	 | \
-+			CFG_CMD_NAND	 | \
-+			CFG_CMD_PING	 | \
-+			CFG_CMD_PORTIO	 | \
-+			CFG_CMD_REGINFO  | \
-+			CFG_CMD_SAVES	 | \
-+			CFG_CMD_USB)
-+
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY	3
-+#define CONFIG_BOOTARGS    	"root=/dev/mtdblock4 rootfstype=jffs2 console=ttySAC2,115200 loglevel=8"
-+#define CONFIG_ETHADDR		00:0c:20:02:0a:5b 
-+#define CONFIG_NETMASK          255.255.255.0
-+#define CONFIG_IPADDR		192.168.1.100
-+#define CONFIG_SERVERIP		192.168.1.21
-+/*#define CONFIG_BOOTFILE	"elinos-lart" */
-+//#define CONFIG_BOOTCOMMAND	"nand read 0x32000000 0x34000 0x200000; bootm"
-+#define CONFIG_BOOTCOMMAND	"nand read.e 0x32000000 0x100000 0x200000; bootm"
-+
-+#define CONFIG_DOS_PARTITION	1
-+			
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define	CFG_LONGHELP				/* undef to save memory		*/
-+#define	CFG_PROMPT		"SMDK2440 # "	/* Monitor Command Prompt	*/
-+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define	CFG_MAXARGS		32		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+
-+#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
-+
-+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define	CFG_LOAD_ADDR		0x32000000	/* default load address	*/
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define	CFG_HZ			1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(512*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(8*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+/* IDE/ATA config */
-+
-+#if 0
-+#define CFG_IDE_MAXBUS		1
-+#define CFG_IDE_MAXDEVICE	2
-+#define CFG_IDE_PREINIT		0
-+
-+#define CFG_ATA_BASE_ADDR	
-+#endif
-+
-+#define CONFIG_USB_OHCI		1
-+
-+#define CONFIG_USB_DEVICE	1
-+#define CONFIG_USB_TTY		1
-+#define CFG_CONSOLE_IS_IN_ENV	1
-+#define CONFIG_USBD_VENDORID		0x1457	/* FIC */
-+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x5120	/* gserial */
-+#define CONFIG_USBD_PRODUCTID_CDCACM	0x511b	/* SMDK2440 CDC ACM */
-+#define CONFIG_USBD_MANUFACTURER	"Openmoko, Inc."
-+#define CONFIG_USBD_PRODUCT_NAME	"S3C2440 Bootloader " U_BOOT_VERSION
-+#define CONFIG_EXTRA_ENV_SETTINGS	"usbtty=cdc_acm\0"
-+#define CONFIG_USBD_DFU			1
-+#define CONFIG_USBD_DFU_XFER_SIZE	4096
-+#define CONFIG_USBD_DFU_INTERFACE	2
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-+
-+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-+
-+#define CFG_FLASH_BASE		PHYS_FLASH_1
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+#define CONFIG_AMD_LV400	1	/* uncomment this if you have a LV400 flash */
-+#if 0
-+#define CONFIG_AMD_LV800	1	/* uncomment this if you have a LV800 flash */
-+#endif
-+
-+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-+#ifdef CONFIG_AMD_LV800
-+#define PHYS_FLASH_SIZE		0x00100000 /* 1MB */
-+#define CFG_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
-+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
-+#endif
-+#ifdef CONFIG_AMD_LV400
-+#define PHYS_FLASH_SIZE		0x00080000 /* 512KB */
-+#define CFG_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
-+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x070000) /* addr of environment */
-+#endif
-+
-+/* timeout values are in ticks */
-+#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-+#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
-+
-+#define	CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_SIZE		0x20000		/* 128k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET_OOB	1
-+#define CFG_PREBOOT_OVERRIDE	1
-+
-+#define NAND_MAX_CHIPS		1
-+#define CFG_NAND_BASE		0x4e000000
-+#define CFG_MAX_NAND_DEVICE	1
-+
-+#define CONFIG_MMC		1
-+#define CFG_MMC_BASE		0xff000000
-+
-+#define CONFIG_EXT2		1
-+
-+#define CONFIG_NEW_QT2440	0
-+
-+/* FAT driver in u-boot is broken currently */
-+#define CONFIG_FAT		1
-+#define CONFIG_SUPPORT_VFAT
-+
-+#if 1
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_CMDLINE	1
-+#define CONFIG_JFFS2_NAND	1
-+#define CONFIG_JFFS2_NAND_DEV	0
-+//#define CONFIG_JFFS2_NAND_OFF		0x634000
-+//#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
-+#endif
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_CMDLINE_TAG		1
-+#if 0
-+#define CONFIG_SERIAL_TAG		1
-+#define CONFIG_REVISION_TAG		1
-+#endif
-+
-+
-+#if 0
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+
-+#define VIDEO_KBD_INIT_FCT	0
-+#define VIDEO_TSTC_FCT		serial_tstc
-+#define VIDEO_GETC_FCT		serial_getc
-+
-+#define LCD_VIDEO_ADDR		0x33d00000
-+#endif
-+
-+#define CONFIG_S3C2410_NAND_BBT		1
-+//#define CONFIG_S3C2410_NAND_HWECC	1
-+
-+#define CFG_NAND_YAFFS_WRITE
-+#define CFG_NAND_YAFFS1_NEW_OOB_LAYOUT
-+
-+#define MTDIDS_DEFAULT		"nand0=smdk2440-nand"
-+#define MTPARTS_DEFAULT		"smdk2440-nand:0x00100000(u-boot),0x00200000(kernel),0x00200000(update),0x00100000(splash),0x01400000(jffs2),-(temp)"
-+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "smdk2440-nand"
-+#define CONFIG_NAND_DYNPART
-+
-+#endif	/* __CONFIG_H */
-Index: u-boot/include/configs/smdk2440nand.h
-===================================================================
---- /dev/null
-+++ u-boot/include/configs/smdk2440nand.h
-@@ -0,0 +1,47 @@
-+/*
-+ * (C) Copyright 2004 
-+ *  Samsung Electronics  : SW.LEE <hitchcar@samsung.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ */
-+
-+#ifndef __SMDK2440_NAND_H
-+#define __SMDK2440_NAND_H
-+
-+#define CFG_ENV_NAND_BLOCK     8
-+
-+#if 0 //old flash
-+#define NAND_OOB_SIZE           (16)
-+#define NAND_PAGES_IN_BLOCK     (32)
-+#define NAND_PAGE_SIZE          (512)
-+
-+#define NAND_BLOCK_SIZE         (NAND_PAGE_SIZE*NAND_PAGES_IN_BLOCK)
-+#define NAND_BLOCK_MASK         (NAND_BLOCK_SIZE - 1)
-+#define NAND_PAGE_MASK          (NAND_PAGE_SIZE - 1)
-+#else	//new flash
-+#define NAND_OOB_SIZE           (64)
-+#define NAND_PAGES_IN_BLOCK     (64)
-+#define NAND_PAGE_SIZE          (2048)
-+
-+#define NAND_BLOCK_SIZE         (NAND_PAGE_SIZE*NAND_PAGES_IN_BLOCK)
-+#define NAND_BLOCK_MASK         (NAND_BLOCK_SIZE - 1)
-+#define NAND_PAGE_MASK          (NAND_PAGE_SIZE - 1)
-+
-+#endif
-+
-+
-+
-+//#define NAND_3_ADDR_CYCLE	1
-+//#define S3C24X0_16BIT_NAND	1
-+
-+#ifdef KINGFISH
-+#undef S3C24X0_16BIT_NAND	
-+#define S3C24X0_16BIT_NAND	1
-+#endif
-+
-+#endif	
-+
-Index: u-boot/board/smdk2440/Makefile
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/Makefile
-@@ -0,0 +1,67 @@
-+#
-+# (C) Copyright 2000-2006
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= $(obj)lib$(BOARD).a
-+
-+COBJS	:= smdk2440.o flash.o udc.o
-+SOBJS	:= lowlevel_init.o
-+
-+.PHONY:	all
-+
-+all:	$(LIB) lowlevel_foo.bin
-+
-+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS	:= $(addprefix $(obj),$(COBJS))
-+SOBJS	:= $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-+
-+lowlevel_foo.o:	lowlevel_foo.S
-+	$(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \
-+	  -o lowlevel_foo.o lowlevel_foo.S
-+
-+lowlevel_foo:	lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds
-+	$(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \
-+	  lowlevel_init.o lowlevel_foo.o -o lowlevel_foo
-+
-+lowlevel_foo.bin:	lowlevel_foo
-+	$(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \
-+	  lowlevel_foo lowlevel_foo.bin
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-Index: u-boot/board/smdk2440/config.mk
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/config.mk
-@@ -0,0 +1,29 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+#
-+# SAMSUNG SMDK2440 board with S3C2440 (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+CONFIG_USB_DFU_VENDOR=0x1457
-+CONFIG_USB_DFU_PRODUCT=0x511b
-+CONFIG_USB_DFU_REVISION=0x0100
-+
-+#
-+# SMDK2440 has 1 bank of 64 MB DRAM
-+#
-+# 3000'0000 to 3400'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# we load ourself to 33F8'0000
-+#
-+# download area is 3300'0000
-+#
-+
-+
-+TEXT_BASE = 0x33F80000
-Index: u-boot/board/smdk2440/flash.c
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/flash.c
-@@ -0,0 +1,433 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Alex Zuepke <azu@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+ulong myflush (void);
-+
-+
-+#define FLASH_BANK_SIZE	PHYS_FLASH_SIZE
-+#define MAIN_SECT_SIZE  0x10000	/* 64 KB */
-+
-+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-+
-+
-+#define CMD_READ_ARRAY		0x000000F0
-+#define CMD_UNLOCK1		0x000000AA
-+#define CMD_UNLOCK2		0x00000055
-+#define CMD_ERASE_SETUP		0x00000080
-+#define CMD_ERASE_CONFIRM	0x00000030
-+#define CMD_PROGRAM		0x000000A0
-+#define CMD_UNLOCK_BYPASS	0x00000020
-+
-+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
-+
-+#define BIT_ERASE_DONE		0x00000080
-+#define BIT_RDY_MASK		0x00000080
-+#define BIT_PROGRAM_ERROR	0x00000020
-+#define BIT_TIMEOUT		0x80000000	/* our flag */
-+
-+#define READY 1
-+#define ERR   2
-+#define TMO   4
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+ulong flash_init (void)
-+{
-+	int i, j;
-+	ulong size = 0;
-+
-+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-+		ulong flashbase = 0;
-+
-+		flash_info[i].flash_id =
-+#if defined(CONFIG_AMD_LV400)
-+			(AMD_MANUFACT & FLASH_VENDMASK) |
-+			(AMD_ID_LV400B & FLASH_TYPEMASK);
-+#elif defined(CONFIG_AMD_LV800)
-+			(AMD_MANUFACT & FLASH_VENDMASK) |
-+			(AMD_ID_LV800B & FLASH_TYPEMASK);
-+#else
-+#error "Unknown flash configured"
-+#endif
-+			flash_info[i].size = FLASH_BANK_SIZE;
-+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-+		if (i == 0)
-+			flashbase = PHYS_FLASH_1;
-+		else
-+			panic ("configured too many flash banks!\n");
-+		for (j = 0; j < flash_info[i].sector_count; j++) {
-+			if (j <= 3) {
-+				/* 1st one is 16 KB */
-+				if (j == 0) {
-+					flash_info[i].start[j] =
-+						flashbase + 0;
-+				}
-+
-+				/* 2nd and 3rd are both 8 KB */
-+				if ((j == 1) || (j == 2)) {
-+					flash_info[i].start[j] =
-+						flashbase + 0x4000 + (j -
-+								      1) *
-+						0x2000;
-+				}
-+
-+				/* 4th 32 KB */
-+				if (j == 3) {
-+					flash_info[i].start[j] =
-+						flashbase + 0x8000;
-+				}
-+			} else {
-+				flash_info[i].start[j] =
-+					flashbase + (j - 3) * MAIN_SECT_SIZE;
-+			}
-+		}
-+		size += flash_info[i].size;
-+	}
-+
-+	flash_protect (FLAG_PROTECT_SET,
-+		       CFG_FLASH_BASE,
-+		       CFG_FLASH_BASE + monitor_flash_len - 1,
-+		       &flash_info[0]);
-+
-+	flash_protect (FLAG_PROTECT_SET,
-+		       CFG_ENV_ADDR,
-+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
-+
-+	return size;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+void flash_print_info (flash_info_t * info)
-+{
-+	int i;
-+
-+	switch (info->flash_id & FLASH_VENDMASK) {
-+	case (AMD_MANUFACT & FLASH_VENDMASK):
-+		printf ("AMD: ");
-+		break;
-+	default:
-+		printf ("Unknown Vendor ");
-+		break;
-+	}
-+
-+	switch (info->flash_id & FLASH_TYPEMASK) {
-+	case (AMD_ID_LV400B & FLASH_TYPEMASK):
-+		printf ("1x Amd29LV400BB (4Mbit)\n");
-+		break;
-+	case (AMD_ID_LV800B & FLASH_TYPEMASK):
-+		printf ("1x Amd29LV800BB (8Mbit)\n");
-+		break;
-+	default:
-+		printf ("Unknown Chip Type\n");
-+		goto Done;
-+		break;
-+	}
-+
-+	printf ("  Size: %ld MB in %d Sectors\n",
-+		info->size >> 20, info->sector_count);
-+
-+	printf ("  Sector Start Addresses:");
-+	for (i = 0; i < info->sector_count; i++) {
-+		if ((i % 5) == 0) {
-+			printf ("\n   ");
-+		}
-+		printf (" %08lX%s", info->start[i],
-+			info->protect[i] ? " (RO)" : "     ");
-+	}
-+	printf ("\n");
-+
-+      Done:;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+int flash_erase (flash_info_t * info, int s_first, int s_last)
-+{
-+	ushort result;
-+	int iflag, cflag, prot, sect;
-+	int rc = ERR_OK;
-+	int chip;
-+
-+	/* first look for protection bits */
-+
-+	if (info->flash_id == FLASH_UNKNOWN)
-+		return ERR_UNKNOWN_FLASH_TYPE;
-+
-+	if ((s_first < 0) || (s_first > s_last)) {
-+		return ERR_INVAL;
-+	}
-+
-+	if ((info->flash_id & FLASH_VENDMASK) !=
-+	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-+		return ERR_UNKNOWN_FLASH_VENDOR;
-+	}
-+
-+	prot = 0;
-+	for (sect = s_first; sect <= s_last; ++sect) {
-+		if (info->protect[sect]) {
-+			prot++;
-+		}
-+	}
-+	if (prot)
-+		return ERR_PROTECTED;
-+
-+	/*
-+	 * Disable interrupts which might cause a timeout
-+	 * here. Remember that our exception vectors are
-+	 * at address 0 in the flash, and we don't want a
-+	 * (ticker) exception to happen while the flash
-+	 * chip is in programming mode.
-+	 */
-+	cflag = icache_status ();
-+	icache_disable ();
-+	iflag = disable_interrupts ();
-+
-+	/* Start erase on unprotected sectors */
-+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-+		printf ("Erasing sector %2d ... ", sect);
-+
-+		/* arm simple, non interrupt dependent timer */
-+		reset_timer_masked ();
-+
-+		if (info->protect[sect] == 0) {	/* not protected */
-+			vu_short *addr = (vu_short *) (info->start[sect]);
-+
-+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-+
-+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+			*addr = CMD_ERASE_CONFIRM;
-+
-+			/* wait until flash is ready */
-+			chip = 0;
-+
-+			do {
-+				result = *addr;
-+
-+				/* check timeout */
-+				if (get_timer_masked () >
-+				    CFG_FLASH_ERASE_TOUT) {
-+					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+					chip = TMO;
-+					break;
-+				}
-+
-+				if (!chip
-+				    && (result & 0xFFFF) & BIT_ERASE_DONE)
-+					chip = READY;
-+
-+				if (!chip
-+				    && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
-+					chip = ERR;
-+
-+			} while (!chip);
-+
-+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+
-+			if (chip == ERR) {
-+				rc = ERR_PROG_ERROR;
-+				goto outahere;
-+			}
-+			if (chip == TMO) {
-+				rc = ERR_TIMOUT;
-+				goto outahere;
-+			}
-+
-+			printf ("ok.\n");
-+		} else {	/* it was protected */
-+
-+			printf ("protected!\n");
-+		}
-+	}
-+
-+	if (ctrlc ())
-+		printf ("User Interrupt!\n");
-+
-+      outahere:
-+	/* allow flash to settle - wait 10 ms */
-+	udelay_masked (10000);
-+
-+	if (iflag)
-+		enable_interrupts ();
-+
-+	if (cflag)
-+		icache_enable ();
-+
-+	return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash
-+ */
-+
-+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
-+{
-+	vu_short *addr = (vu_short *) dest;
-+	ushort result;
-+	int rc = ERR_OK;
-+	int cflag, iflag;
-+	int chip;
-+
-+	/*
-+	 * Check if Flash is (sufficiently) erased
-+	 */
-+	result = *addr;
-+	if ((result & data) != data)
-+		return ERR_NOT_ERASED;
-+
-+
-+	/*
-+	 * Disable interrupts which might cause a timeout
-+	 * here. Remember that our exception vectors are
-+	 * at address 0 in the flash, and we don't want a
-+	 * (ticker) exception to happen while the flash
-+	 * chip is in programming mode.
-+	 */
-+	cflag = icache_status ();
-+	icache_disable ();
-+	iflag = disable_interrupts ();
-+
-+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+	MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
-+	*addr = CMD_PROGRAM;
-+	*addr = data;
-+
-+	/* arm simple, non interrupt dependent timer */
-+	reset_timer_masked ();
-+
-+	/* wait until flash is ready */
-+	chip = 0;
-+	do {
-+		result = *addr;
-+
-+		/* check timeout */
-+		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
-+			chip = ERR | TMO;
-+			break;
-+		}
-+		if (!chip && ((result & 0x80) == (data & 0x80)))
-+			chip = READY;
-+
-+		if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
-+			result = *addr;
-+
-+			if ((result & 0x80) == (data & 0x80))
-+				chip = READY;
-+			else
-+				chip = ERR;
-+		}
-+
-+	} while (!chip);
-+
-+	*addr = CMD_READ_ARRAY;
-+
-+	if (chip == ERR || *addr != data)
-+		rc = ERR_PROG_ERROR;
-+
-+	if (iflag)
-+		enable_interrupts ();
-+
-+	if (cflag)
-+		icache_enable ();
-+
-+	return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash.
-+ */
-+
-+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-+{
-+	ulong cp, wp;
-+	int l;
-+	int i, rc;
-+	ushort data;
-+
-+	wp = (addr & ~1);	/* get lower word aligned address */
-+
-+	/*
-+	 * handle unaligned start bytes
-+	 */
-+	if ((l = addr - wp) != 0) {
-+		data = 0;
-+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-+			data = (data >> 8) | (*(uchar *) cp << 8);
-+		}
-+		for (; i < 2 && cnt > 0; ++i) {
-+			data = (data >> 8) | (*src++ << 8);
-+			--cnt;
-+			++cp;
-+		}
-+		for (; cnt == 0 && i < 2; ++i, ++cp) {
-+			data = (data >> 8) | (*(uchar *) cp << 8);
-+		}
-+
-+		if ((rc = write_hword (info, wp, data)) != 0) {
-+			return (rc);
-+		}
-+		wp += 2;
-+	}
-+
-+	/*
-+	 * handle word aligned part
-+	 */
-+	while (cnt >= 2) {
-+		data = *((vu_short *) src);
-+		if ((rc = write_hword (info, wp, data)) != 0) {
-+			return (rc);
-+		}
-+		src += 2;
-+		wp += 2;
-+		cnt -= 2;
-+	}
-+
-+	if (cnt == 0) {
-+		return ERR_OK;
-+	}
-+
-+	/*
-+	 * handle unaligned tail bytes
-+	 */
-+	data = 0;
-+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-+		data = (data >> 8) | (*src++ << 8);
-+		--cnt;
-+	}
-+	for (; i < 2; ++i, ++cp) {
-+		data = (data >> 8) | (*(uchar *) cp << 8);
-+	}
-+
-+	return write_hword (info, wp, data);
-+}
-Index: u-boot/board/smdk2440/lowlevel_init.S
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/lowlevel_init.S
-@@ -0,0 +1,167 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
-+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
-+ *
-+ * Modified for the Samsung SMDK2410 by
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE  <hitchcar@sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON	0x48000000
-+
-+/* BWSCON */
-+#define DW8		 	(0x0)
-+#define DW16		 	(0x1)
-+#define DW32		 	(0x2)
-+#define WAIT		 	(0x1<<2)
-+#define UBLB		 	(0x1<<3)
-+
-+#define B1_BWSCON	  	(DW32)
-+#define B2_BWSCON	  	(DW16)
-+#define B3_BWSCON	  	(DW16 + WAIT + UBLB)
-+#define B4_BWSCON	  	(DW16)
-+#define B5_BWSCON	  	(DW16)
-+#define B6_BWSCON	  	(DW32)
-+#define B7_BWSCON	  	(DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs		 	0x0	/*  0clk */
-+#define B0_Tcos		 	0x0	/*  0clk */
-+#define B0_Tacc		 	0x7	/* 14clk */
-+#define B0_Tcoh		 	0x0	/*  0clk */
-+#define B0_Tah		 	0x0	/*  0clk */
-+#define B0_Tacp		 	0x0
-+#define B0_PMC		 	0x0	/* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs		 	0x0	/*  0clk */
-+#define B1_Tcos		 	0x0	/*  0clk */
-+#define B1_Tacc		 	0x7	/* 14clk */
-+#define B1_Tcoh		 	0x0	/*  0clk */
-+#define B1_Tah		 	0x0	/*  0clk */
-+#define B1_Tacp		 	0x0
-+#define B1_PMC		 	0x0
-+
-+#define B2_Tacs		 	0x0
-+#define B2_Tcos		 	0x0
-+#define B2_Tacc		 	0x7
-+#define B2_Tcoh		 	0x0
-+#define B2_Tah		 	0x0
-+#define B2_Tacp		 	0x0
-+#define B2_PMC		 	0x0
-+
-+#define B3_Tacs		 	0x0	/*  0clk */
-+#define B3_Tcos		 	0x3	/*  4clk */
-+#define B3_Tacc		 	0x7	/* 14clk */
-+#define B3_Tcoh		 	0x1	/*  1clk */
-+#define B3_Tah		 	0x0	/*  0clk */
-+#define B3_Tacp		 	0x3     /*  6clk */
-+#define B3_PMC		 	0x0	/* normal */
-+
-+#define B4_Tacs		 	0x0	/*  0clk */
-+#define B4_Tcos		 	0x0	/*  0clk */
-+#define B4_Tacc		 	0x7	/* 14clk */
-+#define B4_Tcoh		 	0x0	/*  0clk */
-+#define B4_Tah		 	0x0	/*  0clk */
-+#define B4_Tacp		 	0x0
-+#define B4_PMC		 	0x0	/* normal */
-+
-+#define B5_Tacs		 	0x0	/*  0clk */
-+#define B5_Tcos		 	0x0	/*  0clk */
-+#define B5_Tacc		 	0x7	/* 14clk */
-+#define B5_Tcoh		 	0x0	/*  0clk */
-+#define B5_Tah		 	0x0	/*  0clk */
-+#define B5_Tacp		 	0x0
-+#define B5_PMC		 	0x0	/* normal */
-+
-+#define B6_MT		 	0x3	/* SDRAM */
-+#define B6_Trcd	 	 	0x1
-+#define B6_SCAN		 	0x1	/* 9bit */
-+
-+#define B7_MT		 	0x3	/* SDRAM */
-+#define B7_Trcd		 	0x1	/* 3clk */
-+#define B7_SCAN		 	0x1	/* 9bit */
-+
-+/* REFRESH parameter */
-+#define REFEN		 	0x1	/* Refresh enable */
-+#define TREFMD		 	0x0	/* CBR(CAS before RAS)/Auto refresh */
-+#define Trp		 	0x0	/* 2clk */
-+#define Trc		 	0x3	/* 7clk */
-+#define Tchr		 	0x2	/* 3clk */
-+#define REFCNT		 	1113	/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+	.word	TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+	/* memory control configuration */
-+	/* make r0 relative the current location so that it */
-+	/* reads SMRDATA out of FLASH rather than memory ! */
-+	ldr     r0, =SMRDATA
-+	ldr	r1, _TEXT_BASE
-+	sub	r0, r0, r1
-+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
-+	add     r2, r0, #13*4
-+0:
-+	ldr     r3, [r0], #4
-+	str     r3, [r1], #4
-+	cmp     r2, r0
-+	bne     0b
-+
-+	/* everything is fine now */
-+	mov	pc, lr
-+
-+	.ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+    .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+    .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+    .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+    .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+    .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+    .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+    .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+    .word 0x32
-+    .word 0x30
-+    .word 0x30
-Index: u-boot/board/smdk2440/smdk2440.c
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/smdk2440.c
-@@ -0,0 +1,152 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2440.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#define FCLK_SPEED 1
-+
-+#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
-+#define M_MDIV	0xC3
-+#define M_PDIV	0x4
-+#define M_SDIV	0x1
-+#elif FCLK_SPEED==1		/* Fout = 399.65MHz */
-+#define M_MDIV	0x6e
-+#define M_PDIV	0x3
-+#define M_SDIV	0x1
-+#endif
-+
-+#define USB_CLOCK 1
-+
-+#if USB_CLOCK==0
-+#define U_M_MDIV	0xA1
-+#define U_M_PDIV	0x3
-+#define U_M_SDIV	0x1
-+#elif USB_CLOCK==1
-+#define U_M_MDIV	0x3c
-+#define U_M_PDIV	0x4
-+#define U_M_SDIV	0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+	__asm__ volatile ("1:\n"
-+	  "subs %0, %1, #1\n"
-+	  "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	/* to reduce PLL lock time, adjust the LOCKTIME register */
-+	clk_power->LOCKTIME = 0xFFFFFF;
-+
-+	/* configure MPLL */
-+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (4000);
-+
-+	/* configure UPLL */
-+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (8000);
-+
-+	/* set up the I/O ports */
-+	gpio->GPACON = 0x007FFFFF;
-+	gpio->GPBCON = 0x002a9655;
-+	gpio->GPBUP = 0x000007FF;
-+	gpio->GPCCON = 0xAAAAAAAA;
-+	gpio->GPCUP = 0x0000FFFF;
-+	gpio->GPDCON = 0xAAAAAAAA;
-+	gpio->GPDUP = 0x0000FFFF;
-+	gpio->GPECON = 0xAAAAAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+	gpio->GPFCON = 0x000055AA;
-+	gpio->GPFUP = 0x000000FF;
-+	gpio->GPGCON = 0xFD95FFBA;
-+	gpio->GPGUP = 0x0000FFFF;
-+#ifdef CONFIG_SERIAL3
-+	gpio->GPHCON = 0x002AAAAA;
-+#else
-+	gpio->GPHCON = 0x002AFAAA;
-+#endif
-+	gpio->GPHUP = 0x000007FF;
-+
-+	gpio->GPJCON = 0x2AAAAAA;
-+
-+#if 0
-+	/* USB Device Part */
-+	/*GPGCON is reset for USB Device */
-+	gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */
-+	gpio->GPGUP = gpio->GPGUP | ( 1 << 12);			/* Pull up disable */
-+
-+	gpio->GPGDAT |= ( 1 << 12) ; 
-+	gpio->GPGDAT &= ~( 1 << 12) ; 
-+	udelay(20000);
-+	gpio->GPGDAT |= ( 1 << 12) ; 
-+#endif
-+
-+	/* arch number of SMDK2440-Board */
-+	gd->bd->bi_arch_number = MACH_TYPE_S3C2440;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0x30000100;
-+
-+	icache_enable();
-+	dcache_enable();
-+
-+	return 0;
-+}
-+
-+int dram_init (void)
-+{
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+	return 0;
-+}
-+
-+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000.
-+   "initrd" is sized such that it can hold two uncompressed 16 bit 640*480
-+   images: 640*480*2*2 = 1228800 < 1245184. */
-+
-+unsigned int dynpart_size[] = {
-+    CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 };
-+char *dynpart_names[] = {
-+    "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL };
-+
-+
-Index: u-boot/board/smdk2440/u-boot.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/u-boot.lds
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/arm920t/start.o	(.text)
-+	  cpu/arm920t/s3c24x0/nand_read.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/board/smdk2440/udc.c
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/udc.c
-@@ -0,0 +1,23 @@
-+
-+#include <common.h>
-+#include <usbdcore.h>
-+#include <s3c2440.h>
-+
-+void udc_ctrl(enum usbd_event event, int param)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	switch (event) {
-+	case UDC_CTRL_PULLUP_ENABLE:
-+		if (param)
-+			gpio->GPGDAT |= (1 << 12);
-+		else
-+			gpio->GPGDAT &= ~(1 << 12);
-+		break;
-+	case UDC_CTRL_500mA_ENABLE:
-+		/* IGNORE */
-+		break;
-+	default:
-+		break;
-+	}
-+}
-Index: u-boot/board/smdk2440/lowlevel_foo.S
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/lowlevel_foo.S
-@@ -0,0 +1,82 @@
-+
-+_start:
-+	b 	reset
-+undefvec:
-+	b	undefvec
-+swivec:
-+	b	swivec
-+pabtvec:
-+	b	pabtvec
-+dabtvec:
-+	b	dabtvec
-+rsvdvec:
-+	b	rsvdvec
-+irqvec:
-+	b	irqvec
-+fiqvec:
-+	b	fiqvec
-+
-+reset:
-+	/*
-+	 * set the cpu to SVC32 mode
-+	 */
-+	mrs	r0,cpsr
-+	bic	r0,r0,#0x1f
-+	orr	r0,r0,#0xd3
-+	msr	cpsr,r0
-+
-+/* turn off the watchdog */
-+#define pWTCON		0x53000000
-+#define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
-+#define INTSUBMSK	0x4A00001C
-+#define CLKDIVN	0x4C000014	/* clock divisor register */
-+
-+	ldr     r0, =pWTCON
-+	mov     r1, #0x0
-+	str     r1, [r0]
-+
-+	mov	r1, #0xffffffff
-+	ldr	r0, =INTMSK
-+	str	r1, [r0]
-+	ldr	r1, =0x3ff
-+	ldr	r0, =INTSUBMSK
-+	str	r1, [r0]
-+
-+	/* FCLK:HCLK:PCLK = 1:2:4 */
-+	/* default FCLK is 120 MHz ! */
-+	ldr	r0, =CLKDIVN
-+	mov	r1, #3
-+	str	r1, [r0]
-+
-+	bl	cpu_init_crit
-+	ldr	r0,=TEXT_BASE
-+	mov	pc, r0
-+
-+cpu_init_crit:
-+	/*
-+	 * flush v4 I/D caches
-+	 */
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-+
-+	/*
-+	 * disable MMU stuff and caches
-+	 */
-+	mrc	p15, 0, r0, c1, c0, 0
-+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-+	mcr	p15, 0, r0, c1, c0, 0
-+
-+	/*
-+	 * before relocating, we have to setup RAM timing
-+	 * because memory timing is board-dependend, you will
-+	 * find a lowlevel_init.S in your board directory.
-+	 */
-+	mov	ip, lr
-+	bl	lowlevel_init
-+	mov	lr, ip
-+	mov	pc, lr
-+
-Index: u-boot/board/smdk2440/lowlevel_foo.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2440/lowlevel_foo.lds
-@@ -0,0 +1,56 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  lowlevel_foo.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-smdk2443.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-smdk2443.patch
deleted file mode 100644
index 285c546e73..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-smdk2443.patch
+++ /dev/null
@@ -1,1411 +0,0 @@
-Index: u-boot/Makefile
-===================================================================
---- u-boot.orig/Makefile
-+++ u-boot/Makefile
-@@ -2045,6 +2045,9 @@
- smdk2440_config :	unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2440 NULL s3c24x0
- 
-+smdk2443_config :	unconfig
-+	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2443 NULL s3c24x0
-+
- SX1_config :		unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm925t sx1
- 
-Index: u-boot/board/smdk2443/Makefile
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/Makefile
-@@ -0,0 +1,67 @@
-+#
-+# (C) Copyright 2000-2006
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= $(obj)lib$(BOARD).a
-+
-+COBJS	:= smdk2443.o flash.o udc.o
-+SOBJS	:= lowlevel_init.o
-+
-+.PHONY:	all
-+
-+all:	$(LIB) lowlevel_foo.bin
-+
-+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS	:= $(addprefix $(obj),$(COBJS))
-+SOBJS	:= $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-+
-+lowlevel_foo.o:	lowlevel_foo.S
-+	$(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \
-+	  -o lowlevel_foo.o lowlevel_foo.S
-+
-+lowlevel_foo:	lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds
-+	$(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \
-+	  lowlevel_init.o lowlevel_foo.o -o lowlevel_foo
-+
-+lowlevel_foo.bin:	lowlevel_foo
-+	$(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \
-+	  lowlevel_foo lowlevel_foo.bin
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-Index: u-boot/board/smdk2443/smdk2443.c
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/smdk2443.c
-@@ -0,0 +1,147 @@
-+/*
-+ * (C) Copyright 2006 Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2440.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#define FCLK_SPEED 1
-+
-+#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
-+#define M_MDIV	0xC3
-+#define M_PDIV	0x4
-+#define M_SDIV	0x1
-+#elif FCLK_SPEED==1		/* Fout = 399.65MHz */
-+#define M_MDIV	0x6e
-+#define M_PDIV	0x3
-+#define M_SDIV	0x1
-+#endif
-+
-+#define USB_CLOCK 1
-+
-+#if USB_CLOCK==0
-+#define U_M_MDIV	0xA1
-+#define U_M_PDIV	0x3
-+#define U_M_SDIV	0x1
-+#elif USB_CLOCK==1
-+#define U_M_MDIV	0x3c
-+#define U_M_PDIV	0x4
-+#define U_M_SDIV	0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+	__asm__ volatile ("1:\n"
-+	  "subs %0, %1, #1\n"
-+	  "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	/* to reduce PLL lock time, adjust the LOCKTIME register */
-+	clk_power->LOCKTIME = 0xFFFFFF;
-+
-+	/* configure MPLL */
-+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (4000);
-+
-+	/* configure UPLL */
-+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+	/* some delay between MPLL and UPLL */
-+	delay (8000);
-+
-+	/* set up the I/O ports */
-+	gpio->GPACON = 0x007FFFFF;
-+	gpio->GPBCON = 0x00044555;
-+	gpio->GPBUP = 0x000007FF;
-+	gpio->GPCCON = 0xAAAAAAAA;
-+	gpio->GPCUP = 0x0000FFFF;
-+	gpio->GPDCON = 0xAAAAAAAA;
-+	gpio->GPDUP = 0x0000FFFF;
-+	gpio->GPECON = 0xAAAAAAAA;
-+	gpio->GPEUP = 0x0000FFFF;
-+	gpio->GPFCON = 0x000055AA;
-+	gpio->GPFUP = 0x000000FF;
-+	gpio->GPGCON = 0xFD95FFBA;
-+	gpio->GPGUP = 0x0000FFFF;
-+#ifdef CONFIG_SERIAL3
-+	gpio->GPHCON = 0x002AAAAA;
-+#else
-+	gpio->GPHCON = 0x002AFAAA;
-+#endif
-+	gpio->GPHUP = 0x000007FF;
-+
-+#if 0
-+	/* USB Device Part */
-+	/*GPGCON is reset for USB Device */
-+	gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */
-+	gpio->GPGUP = gpio->GPGUP | ( 1 << 12);			/* Pull up disable */
-+
-+	gpio->GPGDAT |= ( 1 << 12) ;
-+	gpio->GPGDAT &= ~( 1 << 12) ;
-+	udelay(20000);
-+	gpio->GPGDAT |= ( 1 << 12) ;
-+#endif
-+
-+	/* arch number of SMDK2440-Board */
-+	gd->bd->bi_arch_number = MACH_TYPE_S3C2440;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = 0x30000100;
-+
-+	icache_enable();
-+	dcache_enable();
-+
-+	return 0;
-+}
-+
-+int dram_init (void)
-+{
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+	return 0;
-+}
-+
-+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000.
-+   "initrd" is sized such that it can hold two uncompressed 16 bit 640*480
-+   images: 640*480*2*2 = 1228800 < 1245184. */
-+
-+unsigned int dynpart_size[] = {
-+    CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 };
-+
-+char *dynpart_names[] = {
-+    "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL };
-+
-+
-Index: u-boot/board/smdk2443/u-boot.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/u-boot.lds
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  cpu/arm920t/start.o	(.text)
-+	  cpu/arm920t/s3c24x0/nand_read.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/include/configs/smdk2443.h
-===================================================================
---- /dev/null
-+++ u-boot/include/configs/smdk2443.h
-@@ -0,0 +1,289 @@
-+/*
-+ * (C) Copyright 2007 Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * Configuation settings for the SAMSUNG SMDK2443 board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#if 0
-+/* If we want to start u-boot from usb bootloader in NOR flash */
-+#define CONFIG_SKIP_RELOCATE_UBOOT	1
-+#define	CONFIG_SKIP_LOWLEVEL_INIT	1
-+#else
-+/* If we want to start u-boot directly from within NAND flash */
-+#define CONFIG_LL_INIT_NAND_ONLY
-+#define CONFIG_S3C2410_NAND_BOOT	1
-+#define CONFIG_S3C2410_NAND_SKIP_BAD	1
-+#endif
-+
-+#define CFG_UBOOT_SIZE		0x40000 /* size of u-boot, for NAND loading */
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_S3C2440		1	/* in a SAMSUNG S3C2440 SoC     */
-+#define CONFIG_SMDK2443		1	/* on a SAMSUNG SMDK2440 Board  */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ	16934400/* SMDK2440 has 16.9344MHz input clock */
-+
-+
-+#define USE_920T_MMU		1
-+#define CONFIG_USE_IRQ		1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 2048*1024)
-+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
-+#define CS8900_BASE		0x19000300
-+#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1          1	/* we use SERIAL 1 on SMDK2440 */
-+#define CONFIG_HWFLOW		1
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define	CONFIG_RTC_S3C24X0	1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE		115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS \
-+			(CONFIG_CMD_DFL	 | \
-+			/*CFG_CMD_BSP	 | */ \
-+			CFG_CMD_CACHE	 | \
-+			CFG_CMD_DATE	 | \
-+			/*CFG_CMD_DHCP	 | */ \
-+			CFG_CMD_DIAG	 | \
-+			CFG_CMD_ELF	 | \
-+			CFG_CMD_EXT2	 | \
-+			CFG_CMD_FAT	 | \
-+			/*CFG_CMD_HWFLOW	 | */ \
-+			/* CFG_CMD_IDE	 | */ \
-+			/* CFG_CMD_IRQ	 | */ \
-+			CFG_CMD_JFFS2	 | \
-+			CFG_CMD_MMC	 | \
-+			CFG_CMD_NAND	 | \
-+			CFG_CMD_PING	 | \
-+			CFG_CMD_PORTIO	 | \
-+			CFG_CMD_REGINFO  | \
-+			CFG_CMD_SAVES	 | \
-+			CFG_CMD_LICENSE	 | \
-+			CFG_CMD_USB)
-+
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY	3
-+#define CONFIG_BOOTARGS    	"root=/dev/mtdblock4 rootfstype=jffs2 console=ttySAC2,115200 loglevel=8"
-+#define CONFIG_ETHADDR		00:0c:20:02:0a:5b
-+#define CONFIG_NETMASK          255.255.255.0
-+#define CONFIG_IPADDR		192.168.1.100
-+#define CONFIG_SERVERIP		192.168.1.21
-+#define CONFIG_BOOTCOMMAND	"nand read.e 0x32000000 0x100000 0x200000; bootm"
-+
-+#define CONFIG_DOS_PARTITION	1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define	CFG_LONGHELP				/* undef to save memory		*/
-+#define	CFG_PROMPT		"SMDK2443 # "	/* Monitor Command Prompt	*/
-+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define	CFG_MAXARGS		32		/* max number of command args	*/
-+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-+
-+#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-+#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
-+
-+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-+
-+#define	CFG_LOAD_ADDR		0x32000000	/* default load address	*/
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define	CFG_HZ			1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE	(512*1024)	/* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ	(8*1024)	/* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-+#endif
-+
-+/* IDE/ATA config */
-+
-+#if 0
-+#define CFG_IDE_MAXBUS		1
-+#define CFG_IDE_MAXDEVICE	2
-+#define CFG_IDE_PREINIT		0
-+
-+#define CFG_ATA_BASE_ADDR
-+#endif
-+
-+#define CONFIG_USB_OHCI		1
-+
-+#define CONFIG_USB_DEVICE	1
-+#define CONFIG_USB_TTY		1
-+#define CFG_CONSOLE_IS_IN_ENV	1
-+#define CONFIG_USBD_VENDORID		0x1457     /* Linux/NetChip */
-+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x5120    /* gserial */
-+#define CONFIG_USBD_PRODUCTID_CDCACM	0x5119    /* CDC ACM */
-+#define CONFIG_USBD_MANUFACTURER	"FiWin"
-+#define CONFIG_USBD_PRODUCT_NAME	"S3C2443 Bootloader " U_BOOT_VERSION
-+#define CONFIG_EXTRA_ENV_SETTINGS	"usbtty=cdc_acm\0"
-+#define CONFIG_USBD_DFU			1
-+#define CONFIG_USBD_DFU_XFER_SIZE	4096
-+#define CONFIG_USBD_DFU_INTERFACE	2
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-+
-+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-+
-+#define CFG_FLASH_BASE		PHYS_FLASH_1
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+#define CONFIG_AMD_LV400	1	/* uncomment this if you have a LV400 flash */
-+#if 0
-+#define CONFIG_AMD_LV800	1	/* uncomment this if you have a LV800 flash */
-+#endif
-+
-+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-+#ifdef CONFIG_AMD_LV800
-+#define PHYS_FLASH_SIZE		0x00100000 /* 1MB */
-+#define CFG_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
-+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
-+#endif
-+#ifdef CONFIG_AMD_LV400
-+#define PHYS_FLASH_SIZE		0x00080000 /* 512KB */
-+#define CFG_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
-+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x070000) /* addr of environment */
-+#endif
-+
-+/* timeout values are in ticks */
-+#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-+#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
-+
-+#define	CFG_ENV_IS_IN_NAND	1
-+#define CFG_ENV_SIZE		0x20000		/* 128k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET_OOB	1
-+#define CFG_PREBOOT_OVERRIDE	1
-+
-+#define NAND_MAX_CHIPS		1
-+#define CFG_NAND_BASE		0x4e000000
-+#define CFG_MAX_NAND_DEVICE	1
-+
-+#define CONFIG_MMC		1
-+#define CFG_MMC_BASE		0xff000000
-+
-+#define CONFIG_EXT2		1
-+
-+/* FAT driver in u-boot is broken currently */
-+#define CONFIG_FAT		1
-+#define CONFIG_SUPPORT_VFAT
-+
-+#if 1
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_CMDLINE	1
-+#define CONFIG_JFFS2_NAND	1
-+#define CONFIG_JFFS2_NAND_DEV	0
-+//#define CONFIG_JFFS2_NAND_OFF		0x634000
-+//#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
-+#endif
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_CMDLINE_TAG		1
-+#if 0
-+#define CONFIG_SERIAL_TAG		1
-+#define CONFIG_REVISION_TAG		1
-+#endif
-+
-+
-+#if 0
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+
-+#define VIDEO_KBD_INIT_FCT	0
-+#define VIDEO_TSTC_FCT		serial_tstc
-+#define VIDEO_GETC_FCT		serial_getc
-+
-+#define LCD_VIDEO_ADDR		0x33d00000
-+#endif
-+
-+#define CONFIG_S3C2410_NAND_BBT		1
-+//#define CONFIG_S3C2410_NAND_HWECC	1
-+
-+#define CFG_NAND_YAFFS_WRITE
-+#define CFG_NAND_YAFFS1_NEW_OOB_LAYOUT
-+
-+#define MTDIDS_DEFAULT		"nand0=smdk2443-nand"
-+#define MTPARTS_DEFAULT		"smdk2443-nand:0x00100000(u-boot),0x00200000(kernel),0x00200000(update),0x00100000(splash),0x01400000(jffs2),-(temp)"
-+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "smdk2443-nand"
-+#define CONFIG_NAND_DYNPART
-+
-+#endif	/* __CONFIG_H */
-Index: u-boot/board/smdk2443/lowlevel_foo.S
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/lowlevel_foo.S
-@@ -0,0 +1,82 @@
-+
-+_start:
-+	b 	reset
-+undefvec:
-+	b	undefvec
-+swivec:
-+	b	swivec
-+pabtvec:
-+	b	pabtvec
-+dabtvec:
-+	b	dabtvec
-+rsvdvec:
-+	b	rsvdvec
-+irqvec:
-+	b	irqvec
-+fiqvec:
-+	b	fiqvec
-+
-+reset:
-+	/*
-+	 * set the cpu to SVC32 mode
-+	 */
-+	mrs	r0,cpsr
-+	bic	r0,r0,#0x1f
-+	orr	r0,r0,#0xd3
-+	msr	cpsr,r0
-+
-+/* turn off the watchdog */
-+#define pWTCON		0x53000000
-+#define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
-+#define INTSUBMSK	0x4A00001C
-+#define CLKDIVN	0x4C000014	/* clock divisor register */
-+
-+	ldr     r0, =pWTCON
-+	mov     r1, #0x0
-+	str     r1, [r0]
-+
-+	mov	r1, #0xffffffff
-+	ldr	r0, =INTMSK
-+	str	r1, [r0]
-+	ldr	r1, =0x3ff
-+	ldr	r0, =INTSUBMSK
-+	str	r1, [r0]
-+
-+	/* FCLK:HCLK:PCLK = 1:2:4 */
-+	/* default FCLK is 120 MHz ! */
-+	ldr	r0, =CLKDIVN
-+	mov	r1, #3
-+	str	r1, [r0]
-+
-+	bl	cpu_init_crit
-+	ldr	r0,=TEXT_BASE
-+	mov	pc, r0
-+
-+cpu_init_crit:
-+	/*
-+	 * flush v4 I/D caches
-+	 */
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-+
-+	/*
-+	 * disable MMU stuff and caches
-+	 */
-+	mrc	p15, 0, r0, c1, c0, 0
-+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-+	mcr	p15, 0, r0, c1, c0, 0
-+
-+	/*
-+	 * before relocating, we have to setup RAM timing
-+	 * because memory timing is board-dependend, you will
-+	 * find a lowlevel_init.S in your board directory.
-+	 */
-+	mov	ip, lr
-+	bl	lowlevel_init
-+	mov	lr, ip
-+	mov	pc, lr
-+
-Index: u-boot/board/smdk2443/lowlevel_init.S
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/lowlevel_init.S
-@@ -0,0 +1,163 @@
-+/*
-+ * SMDK2443 Memory Setup
-+ *
-+ * Copyright (C) 2007 by Openmoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE  <hitchcar@sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON	0x48000000
-+
-+/* BWSCON */
-+#define DW8		 	(0x0)
-+#define DW16		 	(0x1)
-+#define DW32		 	(0x2)
-+#define WAIT		 	(0x1<<2)
-+#define UBLB		 	(0x1<<3)
-+
-+#define B1_BWSCON	  	(DW32)
-+#define B2_BWSCON	  	(DW16)
-+#define B3_BWSCON	  	(DW16 + WAIT + UBLB)
-+#define B4_BWSCON	  	(DW16)
-+#define B5_BWSCON	  	(DW16)
-+#define B6_BWSCON	  	(DW32)
-+#define B7_BWSCON	  	(DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs		 	0x0	/*  0clk */
-+#define B0_Tcos		 	0x0	/*  0clk */
-+#define B0_Tacc		 	0x7	/* 14clk */
-+#define B0_Tcoh		 	0x0	/*  0clk */
-+#define B0_Tah		 	0x0	/*  0clk */
-+#define B0_Tacp		 	0x0
-+#define B0_PMC		 	0x0	/* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs		 	0x0	/*  0clk */
-+#define B1_Tcos		 	0x0	/*  0clk */
-+#define B1_Tacc		 	0x7	/* 14clk */
-+#define B1_Tcoh		 	0x0	/*  0clk */
-+#define B1_Tah		 	0x0	/*  0clk */
-+#define B1_Tacp		 	0x0
-+#define B1_PMC		 	0x0
-+
-+#define B2_Tacs		 	0x0
-+#define B2_Tcos		 	0x0
-+#define B2_Tacc		 	0x7
-+#define B2_Tcoh		 	0x0
-+#define B2_Tah		 	0x0
-+#define B2_Tacp		 	0x0
-+#define B2_PMC		 	0x0
-+
-+#define B3_Tacs		 	0x0	/*  0clk */
-+#define B3_Tcos		 	0x3	/*  4clk */
-+#define B3_Tacc		 	0x7	/* 14clk */
-+#define B3_Tcoh		 	0x1	/*  1clk */
-+#define B3_Tah		 	0x0	/*  0clk */
-+#define B3_Tacp		 	0x3     /*  6clk */
-+#define B3_PMC		 	0x0	/* normal */
-+
-+#define B4_Tacs		 	0x0	/*  0clk */
-+#define B4_Tcos		 	0x0	/*  0clk */
-+#define B4_Tacc		 	0x7	/* 14clk */
-+#define B4_Tcoh		 	0x0	/*  0clk */
-+#define B4_Tah		 	0x0	/*  0clk */
-+#define B4_Tacp		 	0x0
-+#define B4_PMC		 	0x0	/* normal */
-+
-+#define B5_Tacs		 	0x0	/*  0clk */
-+#define B5_Tcos		 	0x0	/*  0clk */
-+#define B5_Tacc		 	0x7	/* 14clk */
-+#define B5_Tcoh		 	0x0	/*  0clk */
-+#define B5_Tah		 	0x0	/*  0clk */
-+#define B5_Tacp		 	0x0
-+#define B5_PMC		 	0x0	/* normal */
-+
-+#define B6_MT		 	0x3	/* SDRAM */
-+#define B6_Trcd	 	 	0x1
-+#define B6_SCAN		 	0x1	/* 9bit */
-+
-+#define B7_MT		 	0x3	/* SDRAM */
-+#define B7_Trcd		 	0x1	/* 3clk */
-+#define B7_SCAN		 	0x1	/* 9bit */
-+
-+/* REFRESH parameter */
-+#define REFEN		 	0x1	/* Refresh enable */
-+#define TREFMD		 	0x0	/* CBR(CAS before RAS)/Auto refresh */
-+#define Trp		 	0x0	/* 2clk */
-+#define Trc		 	0x3	/* 7clk */
-+#define Tchr		 	0x2	/* 3clk */
-+#define REFCNT		 	1113	/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+	.word	TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+	/* memory control configuration */
-+	/* make r0 relative the current location so that it */
-+	/* reads SMRDATA out of FLASH rather than memory ! */
-+	ldr     r0, =SMRDATA
-+	ldr	r1, _TEXT_BASE
-+	sub	r0, r0, r1
-+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
-+	add     r2, r0, #13*4
-+0:
-+	ldr     r3, [r0], #4
-+	str     r3, [r1], #4
-+	cmp     r2, r0
-+	bne     0b
-+
-+	/* everything is fine now */
-+	mov	pc, lr
-+
-+	.ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+    .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+    .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+    .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+    .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+    .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+    .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+    .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+    .word 0x32
-+    .word 0x30
-+    .word 0x30
-Index: u-boot/board/smdk2443/config.mk
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/config.mk
-@@ -0,0 +1,29 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+#
-+# SAMSUNG SMDK2443 board with S3C2443 (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+CONFIG_USB_DFU_VENDOR=0x1457
-+CONFIG_USB_DFU_PRODUCT=0x511c
-+CONFIG_USB_DFU_REVISION=0x0100
-+
-+#
-+# SMDK2443 has 1 bank of 64 MB DRAM
-+#
-+# 3000'0000 to 3400'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# we load ourself to 33F8'0000
-+#
-+# download area is 3300'0000
-+#
-+
-+
-+TEXT_BASE = 0x33F80000
-Index: u-boot/board/smdk2443/lowlevel_foo.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/lowlevel_foo.lds
-@@ -0,0 +1,56 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	. = 0x00000000;
-+
-+	. = ALIGN(4);
-+	.text      :
-+	{
-+	  lowlevel_foo.o (.text)
-+	  *(.text)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(.rodata) }
-+
-+	. = ALIGN(4);
-+	.data : { *(.data) }
-+
-+	. = ALIGN(4);
-+	.got : { *(.got) }
-+
-+	. = .;
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : { *(.u_boot_cmd) }
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	__bss_start = .;
-+	.bss : { *(.bss) }
-+	_end = .;
-+}
-Index: u-boot/board/smdk2443/flash.c
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/flash.c
-@@ -0,0 +1,433 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Alex Zuepke <azu@sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+ulong myflush (void);
-+
-+
-+#define FLASH_BANK_SIZE	PHYS_FLASH_SIZE
-+#define MAIN_SECT_SIZE  0x10000	/* 64 KB */
-+
-+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-+
-+
-+#define CMD_READ_ARRAY		0x000000F0
-+#define CMD_UNLOCK1		0x000000AA
-+#define CMD_UNLOCK2		0x00000055
-+#define CMD_ERASE_SETUP		0x00000080
-+#define CMD_ERASE_CONFIRM	0x00000030
-+#define CMD_PROGRAM		0x000000A0
-+#define CMD_UNLOCK_BYPASS	0x00000020
-+
-+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
-+
-+#define BIT_ERASE_DONE		0x00000080
-+#define BIT_RDY_MASK		0x00000080
-+#define BIT_PROGRAM_ERROR	0x00000020
-+#define BIT_TIMEOUT		0x80000000	/* our flag */
-+
-+#define READY 1
-+#define ERR   2
-+#define TMO   4
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+ulong flash_init (void)
-+{
-+	int i, j;
-+	ulong size = 0;
-+
-+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-+		ulong flashbase = 0;
-+
-+		flash_info[i].flash_id =
-+#if defined(CONFIG_AMD_LV400)
-+			(AMD_MANUFACT & FLASH_VENDMASK) |
-+			(AMD_ID_LV400B & FLASH_TYPEMASK);
-+#elif defined(CONFIG_AMD_LV800)
-+			(AMD_MANUFACT & FLASH_VENDMASK) |
-+			(AMD_ID_LV800B & FLASH_TYPEMASK);
-+#else
-+#error "Unknown flash configured"
-+#endif
-+			flash_info[i].size = FLASH_BANK_SIZE;
-+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-+		if (i == 0)
-+			flashbase = PHYS_FLASH_1;
-+		else
-+			panic ("configured too many flash banks!\n");
-+		for (j = 0; j < flash_info[i].sector_count; j++) {
-+			if (j <= 3) {
-+				/* 1st one is 16 KB */
-+				if (j == 0) {
-+					flash_info[i].start[j] =
-+						flashbase + 0;
-+				}
-+
-+				/* 2nd and 3rd are both 8 KB */
-+				if ((j == 1) || (j == 2)) {
-+					flash_info[i].start[j] =
-+						flashbase + 0x4000 + (j -
-+								      1) *
-+						0x2000;
-+				}
-+
-+				/* 4th 32 KB */
-+				if (j == 3) {
-+					flash_info[i].start[j] =
-+						flashbase + 0x8000;
-+				}
-+			} else {
-+				flash_info[i].start[j] =
-+					flashbase + (j - 3) * MAIN_SECT_SIZE;
-+			}
-+		}
-+		size += flash_info[i].size;
-+	}
-+
-+	flash_protect (FLAG_PROTECT_SET,
-+		       CFG_FLASH_BASE,
-+		       CFG_FLASH_BASE + monitor_flash_len - 1,
-+		       &flash_info[0]);
-+
-+	flash_protect (FLAG_PROTECT_SET,
-+		       CFG_ENV_ADDR,
-+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
-+
-+	return size;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+void flash_print_info (flash_info_t * info)
-+{
-+	int i;
-+
-+	switch (info->flash_id & FLASH_VENDMASK) {
-+	case (AMD_MANUFACT & FLASH_VENDMASK):
-+		printf ("AMD: ");
-+		break;
-+	default:
-+		printf ("Unknown Vendor ");
-+		break;
-+	}
-+
-+	switch (info->flash_id & FLASH_TYPEMASK) {
-+	case (AMD_ID_LV400B & FLASH_TYPEMASK):
-+		printf ("1x Amd29LV400BB (4Mbit)\n");
-+		break;
-+	case (AMD_ID_LV800B & FLASH_TYPEMASK):
-+		printf ("1x Amd29LV800BB (8Mbit)\n");
-+		break;
-+	default:
-+		printf ("Unknown Chip Type\n");
-+		goto Done;
-+		break;
-+	}
-+
-+	printf ("  Size: %ld MB in %d Sectors\n",
-+		info->size >> 20, info->sector_count);
-+
-+	printf ("  Sector Start Addresses:");
-+	for (i = 0; i < info->sector_count; i++) {
-+		if ((i % 5) == 0) {
-+			printf ("\n   ");
-+		}
-+		printf (" %08lX%s", info->start[i],
-+			info->protect[i] ? " (RO)" : "     ");
-+	}
-+	printf ("\n");
-+
-+      Done:;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+int flash_erase (flash_info_t * info, int s_first, int s_last)
-+{
-+	ushort result;
-+	int iflag, cflag, prot, sect;
-+	int rc = ERR_OK;
-+	int chip;
-+
-+	/* first look for protection bits */
-+
-+	if (info->flash_id == FLASH_UNKNOWN)
-+		return ERR_UNKNOWN_FLASH_TYPE;
-+
-+	if ((s_first < 0) || (s_first > s_last)) {
-+		return ERR_INVAL;
-+	}
-+
-+	if ((info->flash_id & FLASH_VENDMASK) !=
-+	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-+		return ERR_UNKNOWN_FLASH_VENDOR;
-+	}
-+
-+	prot = 0;
-+	for (sect = s_first; sect <= s_last; ++sect) {
-+		if (info->protect[sect]) {
-+			prot++;
-+		}
-+	}
-+	if (prot)
-+		return ERR_PROTECTED;
-+
-+	/*
-+	 * Disable interrupts which might cause a timeout
-+	 * here. Remember that our exception vectors are
-+	 * at address 0 in the flash, and we don't want a
-+	 * (ticker) exception to happen while the flash
-+	 * chip is in programming mode.
-+	 */
-+	cflag = icache_status ();
-+	icache_disable ();
-+	iflag = disable_interrupts ();
-+
-+	/* Start erase on unprotected sectors */
-+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-+		printf ("Erasing sector %2d ... ", sect);
-+
-+		/* arm simple, non interrupt dependent timer */
-+		reset_timer_masked ();
-+
-+		if (info->protect[sect] == 0) {	/* not protected */
-+			vu_short *addr = (vu_short *) (info->start[sect]);
-+
-+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-+
-+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+			*addr = CMD_ERASE_CONFIRM;
-+
-+			/* wait until flash is ready */
-+			chip = 0;
-+
-+			do {
-+				result = *addr;
-+
-+				/* check timeout */
-+				if (get_timer_masked () >
-+				    CFG_FLASH_ERASE_TOUT) {
-+					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+					chip = TMO;
-+					break;
-+				}
-+
-+				if (!chip
-+				    && (result & 0xFFFF) & BIT_ERASE_DONE)
-+					chip = READY;
-+
-+				if (!chip
-+				    && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
-+					chip = ERR;
-+
-+			} while (!chip);
-+
-+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+
-+			if (chip == ERR) {
-+				rc = ERR_PROG_ERROR;
-+				goto outahere;
-+			}
-+			if (chip == TMO) {
-+				rc = ERR_TIMOUT;
-+				goto outahere;
-+			}
-+
-+			printf ("ok.\n");
-+		} else {	/* it was protected */
-+
-+			printf ("protected!\n");
-+		}
-+	}
-+
-+	if (ctrlc ())
-+		printf ("User Interrupt!\n");
-+
-+      outahere:
-+	/* allow flash to settle - wait 10 ms */
-+	udelay_masked (10000);
-+
-+	if (iflag)
-+		enable_interrupts ();
-+
-+	if (cflag)
-+		icache_enable ();
-+
-+	return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash
-+ */
-+
-+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
-+{
-+	vu_short *addr = (vu_short *) dest;
-+	ushort result;
-+	int rc = ERR_OK;
-+	int cflag, iflag;
-+	int chip;
-+
-+	/*
-+	 * Check if Flash is (sufficiently) erased
-+	 */
-+	result = *addr;
-+	if ((result & data) != data)
-+		return ERR_NOT_ERASED;
-+
-+
-+	/*
-+	 * Disable interrupts which might cause a timeout
-+	 * here. Remember that our exception vectors are
-+	 * at address 0 in the flash, and we don't want a
-+	 * (ticker) exception to happen while the flash
-+	 * chip is in programming mode.
-+	 */
-+	cflag = icache_status ();
-+	icache_disable ();
-+	iflag = disable_interrupts ();
-+
-+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+	MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
-+	*addr = CMD_PROGRAM;
-+	*addr = data;
-+
-+	/* arm simple, non interrupt dependent timer */
-+	reset_timer_masked ();
-+
-+	/* wait until flash is ready */
-+	chip = 0;
-+	do {
-+		result = *addr;
-+
-+		/* check timeout */
-+		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
-+			chip = ERR | TMO;
-+			break;
-+		}
-+		if (!chip && ((result & 0x80) == (data & 0x80)))
-+			chip = READY;
-+
-+		if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
-+			result = *addr;
-+
-+			if ((result & 0x80) == (data & 0x80))
-+				chip = READY;
-+			else
-+				chip = ERR;
-+		}
-+
-+	} while (!chip);
-+
-+	*addr = CMD_READ_ARRAY;
-+
-+	if (chip == ERR || *addr != data)
-+		rc = ERR_PROG_ERROR;
-+
-+	if (iflag)
-+		enable_interrupts ();
-+
-+	if (cflag)
-+		icache_enable ();
-+
-+	return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash.
-+ */
-+
-+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-+{
-+	ulong cp, wp;
-+	int l;
-+	int i, rc;
-+	ushort data;
-+
-+	wp = (addr & ~1);	/* get lower word aligned address */
-+
-+	/*
-+	 * handle unaligned start bytes
-+	 */
-+	if ((l = addr - wp) != 0) {
-+		data = 0;
-+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-+			data = (data >> 8) | (*(uchar *) cp << 8);
-+		}
-+		for (; i < 2 && cnt > 0; ++i) {
-+			data = (data >> 8) | (*src++ << 8);
-+			--cnt;
-+			++cp;
-+		}
-+		for (; cnt == 0 && i < 2; ++i, ++cp) {
-+			data = (data >> 8) | (*(uchar *) cp << 8);
-+		}
-+
-+		if ((rc = write_hword (info, wp, data)) != 0) {
-+			return (rc);
-+		}
-+		wp += 2;
-+	}
-+
-+	/*
-+	 * handle word aligned part
-+	 */
-+	while (cnt >= 2) {
-+		data = *((vu_short *) src);
-+		if ((rc = write_hword (info, wp, data)) != 0) {
-+			return (rc);
-+		}
-+		src += 2;
-+		wp += 2;
-+		cnt -= 2;
-+	}
-+
-+	if (cnt == 0) {
-+		return ERR_OK;
-+	}
-+
-+	/*
-+	 * handle unaligned tail bytes
-+	 */
-+	data = 0;
-+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-+		data = (data >> 8) | (*src++ << 8);
-+		--cnt;
-+	}
-+	for (; i < 2; ++i, ++cp) {
-+		data = (data >> 8) | (*(uchar *) cp << 8);
-+	}
-+
-+	return write_hword (info, wp, data);
-+}
-Index: u-boot/board/smdk2443/udc.c
-===================================================================
---- /dev/null
-+++ u-boot/board/smdk2443/udc.c
-@@ -0,0 +1,23 @@
-+
-+#include <common.h>
-+#include <usbdcore.h>
-+#include <s3c2440.h>
-+
-+void udc_ctrl(enum usbd_event event, int param)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+	switch (event) {
-+	case UDC_CTRL_PULLUP_ENABLE:
-+		if (param)
-+			gpio->GPGDAT |= (1 << 12);
-+		else
-+			gpio->GPGDAT &= ~(1 << 12);
-+		break;
-+	case UDC_CTRL_500mA_ENABLE:
-+		/* IGNORE */
-+		break;
-+	default:
-+		break;
-+	}
-+}
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-strtoul.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-strtoul.patch
deleted file mode 100644
index a88e94b006..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-strtoul.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-Make simple_strtoul work with upper-case hex numbers.
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/lib_generic/vsprintf.c
-===================================================================
---- u-boot.orig/lib_generic/vsprintf.c
-+++ u-boot/lib_generic/vsprintf.c
-@@ -25,21 +25,22 @@ unsigned long simple_strtoul(const char 
- {
- 	unsigned long result = 0,value;
- 
--	if (*cp == '0') {
--		cp++;
--		if ((*cp == 'x') && isxdigit(cp[1])) {
--			base = 16;
--			cp++;
--		}
--		if (!base) {
--			base = 8;
--		}
--	}
- 	if (!base) {
- 		base = 10;
-+		if (*cp == '0') {
-+			base = 8;
-+			cp++;
-+			if ((toupper(*cp) == 'X') && isxdigit(cp[1])) {
-+				cp++;
-+				base = 16;
-+			}
-+		}
-+	} else if (base == 16) {
-+		if (cp[0] == '0' && toupper(cp[1]) == 'X')
-+			cp += 2;
- 	}
--	while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp)
--	    ? toupper(*cp) : *cp)-'A'+10) < base) {
-+	while (isxdigit(*cp) &&
-+	       (value = isdigit(*cp) ? *cp-'0' : toupper(*cp)-'A'+10) < base) {
- 		result = result*base + value;
- 		cp++;
- 	}
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-usbtty-acm.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-usbtty-acm.patch
deleted file mode 100644
index 722a227aa6..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/uboot-usbtty-acm.patch
+++ /dev/null
@@ -1,1607 +0,0 @@
-This patch adds cdc_acm interoperability to u-boot usbtty.
-
-It was taken (almost blindly) from the Linux for Siemens SX1 project on
-handhelds.org.  Please don't complain to me about coding style issues
-or whitespace changes in this one - HW.
-
-Index: u-boot/drivers/usbtty.c
-===================================================================
---- u-boot.orig/drivers/usbtty.c	2007-02-08 21:11:27.000000000 +0100
-+++ u-boot/drivers/usbtty.c	2007-02-08 21:11:55.000000000 +0100
-@@ -1,6 +1,9 @@
- /*
-  * (C) Copyright 2003
-  * Gerry Hamel, geh@ti.com, Texas Instruments
-+ * 
-+ * (C) Copyright 2006
-+ * Bryan O'Donoghue, bodonoghue <at> codehermit.ie
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-@@ -22,26 +25,61 @@
- 
- #ifdef CONFIG_USB_TTY
- 
-+#include <asm/io.h>
- #include <circbuf.h>
- #include <devices.h>
- #include "usbtty.h"
-+#include "usb_cdc_acm.h"
-+#include "usbdescriptors.h"
-+#include <config.h>		/* If defined, override Linux identifiers with
-+			   	 * vendor specific ones */
- 
- #if 0
--#define TTYDBG(fmt,args...) serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
-+//+++ debug print into memory buffer,like kernel log
-+static	char* log_buf = 0x10e00000; // somewhere in RAM
-+static	char  log_str[512];
-+#define TTYDBG(fmt,args...)\
-+	sprintf(log_str,"\n[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args);\
-+	memcpy(log_buf, log_str, strlen(log_str));\
-+	log_buf+=strlen(log_str);\
-+	strcpy(log_buf,"\n---------------------------------------------------")\
-+//---
- #else
- #define TTYDBG(fmt,args...) do{}while(0)
- #endif
- 
- #if 0
--#define TTYERR(fmt,args...) serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
-+#define TTYDBG(fmt,args...)\
-+	serial_printf("[%s] %s %d: "fmt"\n", __FILE__,__FUNCTION__,__LINE__,##args)
-+#endif
-+
-+#if 0
-+#define TTYERR(fmt,args...)\
-+	serial_printf("ERROR![%s] %s %d: "fmt"\n", __FILE__,__FUNCTION__,\
-+	__LINE__,##args)
- #else
- #define TTYERR(fmt,args...) do{}while(0)
- #endif
- 
- /*
-+ * Defines
-+ */
-+#define NUM_CONFIGS    1
-+#define MAX_INTERFACES 2
-+#define NUM_ENDPOINTS  3
-+#define ACM_TX_ENDPOINT 3
-+#define ACM_RX_ENDPOINT 2
-+#define GSERIAL_TX_ENDPOINT 2
-+#define GSERIAL_RX_ENDPOINT 1
-+#define NUM_ACM_INTERFACES 2
-+#define NUM_GSERIAL_INTERFACES 1
-+#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface"
-+#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface"
-+
-+/*
-  * Buffers to hold input and output data
-  */
--#define USBTTY_BUFFER_SIZE 256
-+#define USBTTY_BUFFER_SIZE 2048
- static circbuf_t usbtty_input;
- static circbuf_t usbtty_output;
- 
-@@ -50,157 +88,336 @@
-  * Instance variables
-  */
- static device_t usbttydev;
--static struct usb_device_instance	 device_instance[1];
--static struct usb_bus_instance		 bus_instance[1];
-+static struct usb_device_instance device_instance[1];
-+static struct usb_bus_instance bus_instance[1];
- static struct usb_configuration_instance config_instance[NUM_CONFIGS];
--static struct usb_interface_instance	 interface_instance[NUM_INTERFACES];
--static struct usb_alternate_instance	 alternate_instance[NUM_INTERFACES];
--static struct usb_endpoint_instance	 endpoint_instance[NUM_ENDPOINTS+1]; /* one extra for control endpoint */
--
--/*
-- * Static allocation of urbs
-- */
--#define RECV_ENDPOINT 1
--#define TX_ENDPOINT 2
-+static struct usb_interface_instance interface_instance[MAX_INTERFACES];
-+static struct usb_alternate_instance alternate_instance[MAX_INTERFACES];
-+/* one extra for control endpoint */
-+static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1];
- 
- /*
-  * Global flag
-  */
- int usbtty_configured_flag = 0;
- 
--
- /*
-  * Serial number
-  */
- static char serial_number[16];
- 
-+
- /*
-- * Descriptors
-+ * Descriptors, Strings, Local variables.
-  */
-+
-+/* defined and used by usbdcore_ep0.c */
-+extern struct usb_string_descriptor **usb_strings;
-+
-+/* Indicies, References */
-+static unsigned short rx_endpoint = 0;
-+static unsigned short tx_endpoint = 0;
-+static unsigned short interface_count = 0;
-+static struct usb_string_descriptor *usbtty_string_table[STR_COUNT];
-+
-+/* USB Descriptor Strings */
- static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4};
- static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)];
- static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)];
- static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)];
- static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)];
--static u8 wstrInterface[2 + 2*(sizeof(CONFIG_USBD_INTERFACE_STR)-1)];
--
--static struct usb_string_descriptor *usbtty_string_table[] = {
--  (struct usb_string_descriptor*)wstrLang,
--  (struct usb_string_descriptor*)wstrManufacturer,
--  (struct usb_string_descriptor*)wstrProduct,
--  (struct usb_string_descriptor*)wstrSerial,
--  (struct usb_string_descriptor*)wstrConfiguration,
--  (struct usb_string_descriptor*)wstrInterface
--};
--extern struct usb_string_descriptor **usb_strings; /* defined and used by omap1510_ep0.c */
-+static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
-+static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
- 
-+/* Standard USB Data Structures */
-+static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES];
-+static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS];
-+static struct usb_configuration_descriptor	*configuration_descriptor = 0;
- static struct usb_device_descriptor device_descriptor = {
--  bLength:	      sizeof(struct usb_device_descriptor),
--  bDescriptorType:    USB_DT_DEVICE,
--  bcdUSB:	      USB_BCD_VERSION,
--  bDeviceClass:	      USBTTY_DEVICE_CLASS,
--  bDeviceSubClass:    USBTTY_DEVICE_SUBCLASS,
--  bDeviceProtocol:    USBTTY_DEVICE_PROTOCOL,
--  bMaxPacketSize0:    EP0_MAX_PACKET_SIZE,
--  idVendor:	      CONFIG_USBD_VENDORID,
--  idProduct:	      CONFIG_USBD_PRODUCTID,
--  bcdDevice:	      USBTTY_BCD_DEVICE,
--  iManufacturer:      STR_MANUFACTURER,
--  iProduct:	      STR_PRODUCT,
--  iSerialNumber:      STR_SERIAL,
--  bNumConfigurations: NUM_CONFIGS
--  };
--static struct usb_configuration_descriptor config_descriptors[NUM_CONFIGS] = {
--  {
--    bLength:		 sizeof(struct usb_configuration_descriptor),
--    bDescriptorType:	 USB_DT_CONFIG,
--    wTotalLength:	 (sizeof(struct usb_configuration_descriptor)*NUM_CONFIGS) +
--			 (sizeof(struct usb_interface_descriptor)*NUM_INTERFACES) +
--			 (sizeof(struct usb_endpoint_descriptor)*NUM_ENDPOINTS),
--    bNumInterfaces:	 NUM_INTERFACES,
--    bConfigurationValue: 1,
--    iConfiguration:	 STR_CONFIG,
--    bmAttributes:	 BMATTRIBUTE_SELF_POWERED | BMATTRIBUTE_RESERVED,
--    bMaxPower:		 USBTTY_MAXPOWER
--  },
--};
--static struct usb_interface_descriptor interface_descriptors[NUM_INTERFACES] = {
--  {
--    bLength:		 sizeof(struct usb_interface_descriptor),
--    bDescriptorType:	 USB_DT_INTERFACE,
--    bInterfaceNumber:	 0,
--    bAlternateSetting:	 0,
--    bNumEndpoints:	 NUM_ENDPOINTS,
--    bInterfaceClass:	 USBTTY_INTERFACE_CLASS,
--    bInterfaceSubClass:	 USBTTY_INTERFACE_SUBCLASS,
--    bInterfaceProtocol:	 USBTTY_INTERFACE_PROTOCOL,
--    iInterface:		 STR_INTERFACE
--  },
-+	.bLength = sizeof(struct usb_device_descriptor),
-+	.bDescriptorType =	USB_DT_DEVICE,
-+	.bcdUSB = 		cpu_to_le16(USB_BCD_VERSION),
-+	.bDeviceSubClass =	0x00,
-+	.bDeviceProtocol =	0x00,
-+	.bMaxPacketSize0 =	EP0_MAX_PACKET_SIZE,
-+	.idVendor =		cpu_to_le16(CONFIG_USBD_VENDORID),
-+	.bcdDevice =		cpu_to_le16(USBTTY_BCD_DEVICE),
-+	.iManufacturer =	STR_MANUFACTURER,
-+	.iProduct =		STR_PRODUCT,
-+	.iSerialNumber =	STR_SERIAL,
-+	.bNumConfigurations =	NUM_CONFIGS
- };
--static struct usb_endpoint_descriptor ep_descriptors[NUM_ENDPOINTS] = {
--  {
--    bLength:		 sizeof(struct usb_endpoint_descriptor),
--    bDescriptorType:	 USB_DT_ENDPOINT,
--    bEndpointAddress:	 CONFIG_USBD_SERIAL_OUT_ENDPOINT | USB_DIR_OUT,
--    bmAttributes:	 USB_ENDPOINT_XFER_BULK,
--    wMaxPacketSize:	 CONFIG_USBD_SERIAL_OUT_PKTSIZE,
--    bInterval:		 0
--  },
--  {
--    bLength:		 sizeof(struct usb_endpoint_descriptor),
--    bDescriptorType:	 USB_DT_ENDPOINT,
--    bEndpointAddress:	 CONFIG_USBD_SERIAL_IN_ENDPOINT | USB_DIR_IN,
--    bmAttributes:	 USB_ENDPOINT_XFER_BULK,
--    wMaxPacketSize:	 CONFIG_USBD_SERIAL_IN_PKTSIZE,
--    bInterval:		 0
--  },
--  {
--    bLength:		 sizeof(struct usb_endpoint_descriptor),
--    bDescriptorType:	 USB_DT_ENDPOINT,
--    bEndpointAddress:	 CONFIG_USBD_SERIAL_INT_ENDPOINT | USB_DIR_IN,
--    bmAttributes:	 USB_ENDPOINT_XFER_INT,
--    wMaxPacketSize:	 CONFIG_USBD_SERIAL_INT_PKTSIZE,
--    bInterval:		 0
--  },
--};
--static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS] = {
--  &(ep_descriptors[0]),
--  &(ep_descriptors[1]),
--  &(ep_descriptors[2]),
-+
-+
-+/*
-+ * Static CDC ACM specific descriptors
-+ */
-+
-+struct acm_config_desc {
-+	struct usb_configuration_descriptor configuration_desc;
-+	
-+	/* Master Interface */
-+	struct usb_interface_descriptor interface_desc;
-+	
-+	struct usb_class_header_function_descriptor usb_class_header;
-+	struct usb_class_call_management_descriptor usb_class_call_mgt;
-+	struct usb_class_abstract_control_descriptor usb_class_acm;
-+	struct usb_class_union_function_descriptor usb_class_union;
-+	struct usb_endpoint_descriptor notification_endpoint;
-+
-+	/* Slave Interface */
-+	struct usb_interface_descriptor data_class_interface;
-+	struct usb_endpoint_descriptor 
-+		data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed));
-+} __attribute__((packed));
-+
-+static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
-+	{
-+		.configuration_desc ={
-+			.bLength = 
-+				sizeof(struct usb_configuration_descriptor),
-+    			.bDescriptorType = USB_DT_CONFIG,
-+			.wTotalLength =	 
-+				cpu_to_le16(sizeof(struct acm_config_desc)),
-+	    		.bNumInterfaces = NUM_ACM_INTERFACES,
-+    			.bConfigurationValue = 1,
-+			.iConfiguration = STR_CONFIG,
-+			.bmAttributes = 
-+				BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
-+			.bMaxPower = USBTTY_MAXPOWER
-+		},
-+		/* Interface 1 */
-+		.interface_desc = {
-+			.bLength  = sizeof(struct usb_interface_descriptor),
-+			.bDescriptorType = USB_DT_INTERFACE,
-+			.bInterfaceNumber = 0,
-+			.bAlternateSetting = 0,
-+			.bNumEndpoints = 0x01,
-+			.bInterfaceClass = 
-+				COMMUNICATIONS_INTERFACE_CLASS_CONTROL,
-+			.bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS,
-+			.bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL,
-+			.iInterface = STR_CTRL_INTERFACE,
-+		},
-+		.usb_class_header = {
-+			.bFunctionLength	= 
-+				sizeof(struct usb_class_header_function_descriptor),
-+			.bDescriptorType	= CS_INTERFACE,	
-+			.bDescriptorSubtype	= USB_ST_HEADER,
-+			.bcdCDC	= cpu_to_le16(110),
-+		},
-+		.usb_class_call_mgt = {
-+			.bFunctionLength	= 
-+				sizeof(struct usb_class_call_management_descriptor),
-+			.bDescriptorType	= CS_INTERFACE,
-+			.bDescriptorSubtype	= USB_ST_CMF,
-+			.bmCapabilities		= 0x00,	
-+			.bDataInterface		= 0x01,	
-+		},
-+		.usb_class_acm = {
-+			.bFunctionLength	= 
-+				sizeof(struct usb_class_abstract_control_descriptor),
-+			.bDescriptorType	= CS_INTERFACE,
-+			.bDescriptorSubtype	= USB_ST_ACMF,	
-+			.bmCapabilities		= 0x00,	
-+		},
-+		.usb_class_union = {
-+			.bFunctionLength	= 	
-+				sizeof(struct usb_class_union_function_descriptor),
-+			.bDescriptorType	= CS_INTERFACE,
-+			.bDescriptorSubtype	= USB_ST_UF,
-+			.bMasterInterface	= 0x00,	
-+			.bSlaveInterface0	= 0x01,	
-+		},
-+		.notification_endpoint = {
-+			.bLength =		
-+				sizeof(struct usb_endpoint_descriptor),
-+			.bDescriptorType	= USB_DT_ENDPOINT,
-+			.bEndpointAddress	= 0x01 | USB_DIR_IN,
-+			.bmAttributes		= USB_ENDPOINT_XFER_INT,
-+			.wMaxPacketSize		
-+				= cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
-+			.bInterval		= 0xFF,
-+		},
-+
-+		/* Interface 2 */
-+		.data_class_interface = {
-+			.bLength		= 
-+				sizeof(struct usb_interface_descriptor),
-+			.bDescriptorType	= USB_DT_INTERFACE,
-+			.bInterfaceNumber	= 0x01,
-+			.bAlternateSetting	= 0x00,
-+			.bNumEndpoints		= 0x02,
-+			.bInterfaceClass	= 
-+				COMMUNICATIONS_INTERFACE_CLASS_DATA,
-+			.bInterfaceSubClass	= DATA_INTERFACE_SUBCLASS_NONE,
-+			.bInterfaceProtocol	= DATA_INTERFACE_PROTOCOL_NONE,
-+			.iInterface		= STR_DATA_INTERFACE,
-+		},
-+		.data_endpoints = {
-+			{
-+				.bLength		= 
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType	= USB_DT_ENDPOINT,
-+				.bEndpointAddress	= 0x02 | USB_DIR_OUT,
-+				.bmAttributes		= 
-+					USB_ENDPOINT_XFER_BULK,
-+				.wMaxPacketSize		= 
-+					cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
-+				.bInterval		= 0xFF,
-+			},
-+			{
-+				.bLength		= 
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType	= USB_DT_ENDPOINT,
-+				.bEndpointAddress	= 0x03 | USB_DIR_IN,
-+				.bmAttributes		= 
-+					USB_ENDPOINT_XFER_BULK,
-+				.wMaxPacketSize		= 
-+					cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
-+				.bInterval		= 0xFF,
-+			},
-+		},
-+	},
-+};	
-+
-+static struct rs232_emu rs232_desc={
-+		.dter 		=  	115200,
-+	   	.stop_bits	=	0x00,
-+	   	.parity		=	0x00,
-+		.data_bits	=	0x08
- };
- 
--/* utility function for converting char* to wide string used by USB */
--static void str2wide (char *str, u16 * wide)
--{
--	int i;
- 
--	for (i = 0; i < strlen (str) && str[i]; i++)
--		wide[i] = (u16) str[i];
--}
-+/*
-+ * Static Generic Serial specific data
-+ */
-+
-+
-+struct gserial_config_desc {
-+	
-+	struct usb_configuration_descriptor configuration_desc;
-+	struct usb_interface_descriptor 
-+		interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed));
-+	struct usb_endpoint_descriptor 
-+		data_endpoints[NUM_ENDPOINTS] __attribute__((packed));
-+
-+} __attribute__((packed));
-+
-+static struct gserial_config_desc 
-+gserial_configuration_descriptors[NUM_CONFIGS] ={
-+	{
-+		.configuration_desc ={
-+			.bLength = sizeof(struct usb_configuration_descriptor),
-+			.bDescriptorType = USB_DT_CONFIG,
-+			.wTotalLength =	 
-+				cpu_to_le16(sizeof(struct gserial_config_desc)),
-+			.bNumInterfaces = NUM_GSERIAL_INTERFACES,
-+			.bConfigurationValue = 1,
-+			.iConfiguration = STR_CONFIG,
-+			.bmAttributes = 
-+				BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
-+			.bMaxPower = USBTTY_MAXPOWER
-+		},
-+		.interface_desc = {
-+			{
-+				.bLength  = 
-+					sizeof(struct usb_interface_descriptor),
-+				.bDescriptorType = USB_DT_INTERFACE,
-+				.bInterfaceNumber = 0,
-+				.bAlternateSetting = 0,
-+				.bNumEndpoints = NUM_ENDPOINTS,
-+				.bInterfaceClass = 
-+					COMMUNICATIONS_INTERFACE_CLASS_VENDOR,
-+				.bInterfaceSubClass = 
-+					COMMUNICATIONS_NO_SUBCLASS,
-+				.bInterfaceProtocol = 
-+					COMMUNICATIONS_NO_PROTOCOL,
-+				.iInterface = STR_DATA_INTERFACE
-+			},
-+  		},
-+		.data_endpoints  = {
-+			{
-+				.bLength =		
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType =	USB_DT_ENDPOINT,
-+				.bEndpointAddress =	0x01 | USB_DIR_OUT,
-+				.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-+				.wMaxPacketSize =	
-+					cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE),
-+				.bInterval=		0xFF,
-+			},
-+			{
-+				.bLength =		
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType =	USB_DT_ENDPOINT,
-+				.bEndpointAddress =	0x02 | USB_DIR_IN,
-+				.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-+				.wMaxPacketSize = 	
-+					cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
-+				.bInterval = 		0xFF,
-+			},
-+			{
-+				.bLength = 		
-+					sizeof(struct usb_endpoint_descriptor),
-+				.bDescriptorType =	USB_DT_ENDPOINT,
-+				.bEndpointAddress =	0x03 | USB_DIR_IN,
-+				.bmAttributes =		USB_ENDPOINT_XFER_INT,
-+    				.wMaxPacketSize =	
-+					cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
-+				.bInterval =		0xFF,
-+			},
-+		},
-+	},
-+};
- 
- /*
-- * Prototypes
-+ * Static Function Prototypes
-  */
-+
- static void usbtty_init_strings (void);
- static void usbtty_init_instances (void);
- static void usbtty_init_endpoints (void);
--
-+static void usbtty_init_terminal_type(short type);
- static void usbtty_event_handler (struct usb_device_instance *device,
--				  usb_device_event_t event, int data);
-+				usb_device_event_t event, int data);
-+static int usbtty_cdc_setup(struct usb_device_request *request, 
-+				struct urb *urb);
- static int usbtty_configured (void);
--
- static int write_buffer (circbuf_t * buf);
- static int fill_buffer (circbuf_t * buf);
- 
- void usbtty_poll (void);
--static void pretend_interrupts (void);
- 
-+/* utility function for converting char* to wide string used by USB */
-+static void str2wide (char *str, u16 * wide)
-+{
-+	int i;
-+	for (i = 0; i < strlen (str) && str[i]; i++){
-+		#if defined(__LITTLE_ENDIAN)
-+			wide[i] = (u16) str[i];
-+		#elif defined(__BIG_ENDIAN)
-+			wide[i] = ((u16)(str[i])<<8);
-+		#else
-+			#error "__LITTLE_ENDIAN or __BIG_ENDIAN undefined"
-+		#endif
-+	}
-+}
- 
- /*
-  * Test whether a character is in the RX buffer
-  */
-+
- int usbtty_tstc (void)
- {
-+	struct usb_endpoint_instance *endpoint =
-+		&endpoint_instance[rx_endpoint];
-+
-+	/* If no input data exists, allow more RX to be accepted */
-+	if(usbtty_input.size <= 0){
-+		udc_unset_nak(endpoint->endpoint_address&0x03);
-+	}
-+
- 	usbtty_poll ();
- 	return (usbtty_input.size > 0);
- }
-@@ -210,15 +427,21 @@
-  * otherwise. When the function is succesfull, the character read is
-  * written into its argument c.
-  */
-+
- int usbtty_getc (void)
- {
- 	char c;
-+	struct usb_endpoint_instance *endpoint =
-+		&endpoint_instance[rx_endpoint];
- 
- 	while (usbtty_input.size <= 0) {
-+		udc_unset_nak(endpoint->endpoint_address&0x03);
- 		usbtty_poll ();
- 	}
- 
- 	buf_pop (&usbtty_input, &c, 1);
-+	udc_set_nak(endpoint->endpoint_address&0x03);
-+
- 	return c;
- }
- 
-@@ -238,7 +461,6 @@
- 	}
- }
- 
--
- /* usbtty_puts() helper function for finding the next '\n' in a string */
- static int next_nl_pos (const char *s)
- {
-@@ -252,8 +474,9 @@
- }
- 
- /*
-- * Output a string to the usb client port.
-+ * Output a string to the usb client port - implementing flow control
-  */
-+
- static void __usbtty_puts (const char *str, int len)
- {
- 	int maxlen = usbtty_output.totalsize;
-@@ -261,22 +484,19 @@
- 
- 	/* break str into chunks < buffer size, if needed */
- 	while (len > 0) {
--		space = maxlen - usbtty_output.size;
-+		usbtty_poll ();
- 
-+		space = maxlen - usbtty_output.size;
- 		/* Empty buffer here, if needed, to ensure space... */
--		if (space <= 0) {
-+		if (space) {
- 			write_buffer (&usbtty_output);
--			space = maxlen - usbtty_output.size;
--			if (space <= 0) {
--				space = len;	/* allow old data to be overwritten. */
--			}
--		}
--
--		n = MIN (space, MIN (len, maxlen));
--		buf_push (&usbtty_output, str, n);
-+			
-+			n = MIN (space, MIN (len, maxlen));
-+			buf_push (&usbtty_output, str, n);
- 
--		str += n;
--		len -= n;
-+			str += n;
-+			len -= n;			
-+		}
- 	}
- }
- 
-@@ -313,8 +533,10 @@
- {
- 	int rc;
- 	char * sn;
-+	char * tt;
- 	int snlen;
- 
-+	/* Get serial number */
- 	if (!(sn = getenv("serial#"))) {
- 		sn = "000000000000";
- 	}
-@@ -327,6 +549,14 @@
- 	memcpy (serial_number, sn, snlen);
- 	serial_number[snlen] = '\0';
- 
-+	/* Decide on which type of UDC device to be.
-+	 */
-+
-+	if(!(tt = getenv("usbtty"))) {
-+		tt = "generic";
-+	}
-+	usbtty_init_terminal_type(strcmp(tt,"cdc_acm"));
-+	
- 	/* prepare buffers... */
- 	buf_init (&usbtty_input, USBTTY_BUFFER_SIZE);
- 	buf_init (&usbtty_output, USBTTY_BUFFER_SIZE);
-@@ -337,7 +567,7 @@
- 	usbtty_init_strings ();
- 	usbtty_init_instances ();
- 
--	udc_startup_events (device_instance);	/* Enable our device, initialize udc pointers */
-+	udc_startup_events (device_instance);/* Enable dev, init udc pointers */
- 	udc_connect ();		/* Enable pullup for host detection */
- 
- 	usbtty_init_endpoints ();
-@@ -362,34 +592,52 @@
- {
- 	struct usb_string_descriptor *string;
- 
-+	usbtty_string_table[STR_LANG] = 
-+		(struct usb_string_descriptor*)wstrLang;
-+
- 	string = (struct usb_string_descriptor *) wstrManufacturer;
--	string->bLength = sizeof (wstrManufacturer);
-+	string->bLength = sizeof(wstrManufacturer);
- 	string->bDescriptorType = USB_DT_STRING;
- 	str2wide (CONFIG_USBD_MANUFACTURER, string->wData);
-+	usbtty_string_table[STR_MANUFACTURER]=string;
-+
- 
- 	string = (struct usb_string_descriptor *) wstrProduct;
--	string->bLength = sizeof (wstrProduct);
-+	string->bLength = sizeof(wstrProduct);
- 	string->bDescriptorType = USB_DT_STRING;
- 	str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData);
-+	usbtty_string_table[STR_PRODUCT]=string;
-+
- 
- 	string = (struct usb_string_descriptor *) wstrSerial;
--	string->bLength = 2 + 2*strlen(serial_number);
-+	string->bLength = sizeof(serial_number);
- 	string->bDescriptorType = USB_DT_STRING;
- 	str2wide (serial_number, string->wData);
-+	usbtty_string_table[STR_SERIAL]=string;
-+
- 
- 	string = (struct usb_string_descriptor *) wstrConfiguration;
--	string->bLength = sizeof (wstrConfiguration);
-+	string->bLength = sizeof(wstrConfiguration);
- 	string->bDescriptorType = USB_DT_STRING;
- 	str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData);
-+	usbtty_string_table[STR_CONFIG]=string;
-+
-+
-+	string = (struct usb_string_descriptor *) wstrDataInterface;
-+	string->bLength = sizeof(wstrDataInterface);
-+	string->bDescriptorType = USB_DT_STRING;
-+	str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData);
-+	usbtty_string_table[STR_DATA_INTERFACE]=string;
- 
--	string = (struct usb_string_descriptor *) wstrInterface;
--	string->bLength = sizeof (wstrInterface);
-+	string = (struct usb_string_descriptor *) wstrCtrlInterface;
-+	string->bLength = sizeof(wstrCtrlInterface);
- 	string->bDescriptorType = USB_DT_STRING;
--	str2wide (CONFIG_USBD_INTERFACE_STR, string->wData);
-+	str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData);
-+	usbtty_string_table[STR_CTRL_INTERFACE]=string;
- 
- 	/* Now, initialize the string table for ep0 handling */
- 	usb_strings = usbtty_string_table;
--}
-+}	
- 
- static void usbtty_init_instances (void)
- {
-@@ -400,6 +648,7 @@
- 	device_instance->device_state = STATE_INIT;
- 	device_instance->device_descriptor = &device_descriptor;
- 	device_instance->event = usbtty_event_handler;
-+	device_instance->cdc_recv_setup = usbtty_cdc_setup;
- 	device_instance->bus = bus_instance;
- 	device_instance->configurations = NUM_CONFIGS;
- 	device_instance->configuration_instance_array = config_instance;
-@@ -415,8 +664,8 @@
- 	/* configuration instance */
- 	memset (config_instance, 0,
- 		sizeof (struct usb_configuration_instance));
--	config_instance->interfaces = NUM_INTERFACES;
--	config_instance->configuration_descriptor = config_descriptors;
-+	config_instance->interfaces = interface_count;
-+	config_instance->configuration_descriptor = configuration_descriptor;
- 	config_instance->interface_instance_array = interface_instance;
- 
- 	/* interface instance */
-@@ -447,17 +696,22 @@
- 			sizeof (struct usb_endpoint_instance));
- 
- 		endpoint_instance[i].endpoint_address =
--			ep_descriptors[i - 1].bEndpointAddress;
-+			ep_descriptor_ptrs[i - 1]->bEndpointAddress;
- 
--		endpoint_instance[i].rcv_packetSize =
--			ep_descriptors[i - 1].wMaxPacketSize;
- 		endpoint_instance[i].rcv_attributes =
--			ep_descriptors[i - 1].bmAttributes;
-+			ep_descriptor_ptrs[i - 1]->bmAttributes;
-+
-+		endpoint_instance[i].rcv_packetSize =
-+			le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
-+		
-+		endpoint_instance[i].tx_attributes =
-+			ep_descriptor_ptrs[i - 1]->bmAttributes;
- 
- 		endpoint_instance[i].tx_packetSize =
--			ep_descriptors[i - 1].wMaxPacketSize;
-+			le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
-+
- 		endpoint_instance[i].tx_attributes =
--			ep_descriptors[i - 1].bmAttributes;
-+			ep_descriptor_ptrs[i - 1]->bmAttributes;
- 
- 		urb_link_init (&endpoint_instance[i].rcv);
- 		urb_link_init (&endpoint_instance[i].rdy);
-@@ -480,13 +734,79 @@
- 	int i;
- 
- 	bus_instance->max_endpoints = NUM_ENDPOINTS + 1;
--	for (i = 0; i <= NUM_ENDPOINTS; i++) {
-+	for (i = 1; i <= NUM_ENDPOINTS; i++) {		
- 		udc_setup_ep (device_instance, i, &endpoint_instance[i]);
- 	}
- }
- 
-+/* usbtty_init_terminal_type
-+ * 
-+ * Do some late binding for our device type.
-+ */
-+static void usbtty_init_terminal_type(short type)
-+{
-+	switch(type){
-+		/* CDC ACM */			
-+		case 0:
-+			/* Assign endpoint descriptors */
-+			ep_descriptor_ptrs[0] = 
-+				&acm_configuration_descriptors[0].notification_endpoint;
-+			ep_descriptor_ptrs[1] = 
-+				&acm_configuration_descriptors[0].data_endpoints[0];
-+			ep_descriptor_ptrs[2] = 
-+				&acm_configuration_descriptors[0].data_endpoints[1];
-+
-+			/* Enumerate Device Descriptor */
-+			device_descriptor.bDeviceClass = 
-+				COMMUNICATIONS_DEVICE_CLASS;
-+			device_descriptor.idProduct =
-+				cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM);
-+
-+			/* Assign endpoint indices */
-+			tx_endpoint = ACM_TX_ENDPOINT;
-+			rx_endpoint = ACM_RX_ENDPOINT;
-+			
-+			/* Configuration Descriptor */
-+			configuration_descriptor =
-+				(struct usb_configuration_descriptor*)
-+				&acm_configuration_descriptors;
-+
-+			/* Interface count */
-+			interface_count = NUM_ACM_INTERFACES;
-+		break;
-+
-+		/* BULK IN/OUT & Default */
-+		case 1:
-+		default:
-+			/* Assign endpoint descriptors */
-+			ep_descriptor_ptrs[0] = 
-+				&gserial_configuration_descriptors[0].data_endpoints[0];
-+			ep_descriptor_ptrs[1] = 
-+				&gserial_configuration_descriptors[0].data_endpoints[1];
-+			ep_descriptor_ptrs[2] = 
-+				&gserial_configuration_descriptors[0].data_endpoints[2];
-+
-+			/* Enumerate Device Descriptor */
-+			device_descriptor.bDeviceClass = 0xFF;
-+			device_descriptor.idProduct =
-+				cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL);
-+
-+			/* Assign endpoint indices */
-+			tx_endpoint = GSERIAL_TX_ENDPOINT;
-+			rx_endpoint = GSERIAL_RX_ENDPOINT;
-+
-+			/* Configuration Descriptor */
-+			configuration_descriptor = 
-+				(struct usb_configuration_descriptor*)
-+				&gserial_configuration_descriptors;
-+
-+			/* Interface count */
-+			interface_count = NUM_GSERIAL_INTERFACES;
-+		break;
-+	}
-+}
- 
--/*********************************************************************************/
-+/******************************************************************************/
- 
- static struct urb *next_urb (struct usb_device_instance *device,
- 			     struct usb_endpoint_instance *endpoint)
-@@ -522,82 +842,179 @@
- 
- static int write_buffer (circbuf_t * buf)
- {
--	if (!usbtty_configured ()) {
--		return 0;
--	}
-+        if (!usbtty_configured ()) {
-+                return 0;
-+        }
-+
-+        if (buf->size) {
-+
-+                struct usb_endpoint_instance *endpoint =
-+                        &endpoint_instance[tx_endpoint];
-+                struct urb *current_urb = NULL;
-+                char *dest;
-+
-+                int space_avail;
-+                int popnum, popped;
-+                int total = 0;
-+
-+                /* Break buffer into urb sized pieces, and link each to the endpoint */
-+                while (buf->size > 0) {
-+		TTYDBG ("buf->size= %d",buf->size);
-+                        current_urb = next_urb (device_instance, endpoint);
-+                        if (!current_urb) {
-+                                TTYDBG ("current_urb is NULL, buf->size %d\n",
-+                                        buf->size);
-+                                return total;
-+                        }
-+
-+                        dest = current_urb->buffer +
-+                                current_urb->actual_length;
-+
-+                        space_avail =
-+                                current_urb->buffer_length -
-+                                current_urb->actual_length;
-+		TTYDBG ("space_avail= %d",space_avail);
-+                        popnum = MIN (space_avail, buf->size);
-+                        if (popnum == 0)
-+                                break;
-+
-+                        popped = buf_pop (buf, dest, popnum);
-+		TTYDBG ("popped= %d, %s",popped, dest);
-+                        if (popped == 0)
-+                                break;
-+                        current_urb->actual_length += popped;
-+                        total += popped;
-+
-+                        /* If endpoint->last == 0, then transfers have not started on this endpoint */
-+                        if (endpoint->last == 0) {
-+                                udc_endpoint_write (endpoint);
-+                        }
-+
-+                }               /* end while */
-+		TTYDBG (" total= %d",total);
-+                return total;
-+        }                       /* end if tx_urb */
- 
--	if (buf->size) {
-+        return 0;
-+}
-+// static int write_buffer (circbuf_t * buf)
-+// {
-+// 	if (!usbtty_configured ()) {
-+// 		return 0;
-+// 	}
-+// 	
-+// 	struct usb_endpoint_instance *endpoint =
-+// 			&endpoint_instance[tx_endpoint];
-+// 	struct urb *current_urb = NULL;
-+// 
-+// 	current_urb = next_urb (device_instance, endpoint);
-+// 	/* TX data still exists - send it now 
-+// 	 */	
-+// 	if(endpoint->sent < current_urb->actual_length){
-+// 		if(udc_endpoint_write (endpoint)){
-+// 			/* Write pre-empted by RX */
-+// 			return -1;
-+// 		}
-+// 	}
-+// 
-+// 	if (buf->size) {
-+// 		char *dest;
-+// 
-+// 		int space_avail;
-+// 		int popnum, popped;
-+// 		int total = 0;
-+// 
-+// 		/* Break buffer into urb sized pieces, 
-+// 		 * and link each to the endpoint 
-+// 		 */
-+// 		while (buf->size > 0) {
-+// 			
-+// 			if (!current_urb) {
-+// 				TTYERR ("current_urb is NULL, buf->size %d\n",
-+// 					buf->size);
-+// 				return total;
-+// 			}
-+// 
-+// 			dest = (char*)current_urb->buffer +
-+// 				current_urb->actual_length;
-+// 
-+// 			space_avail =
-+// 				current_urb->buffer_length -
-+// 				current_urb->actual_length;
-+// 			popnum = MIN (space_avail, buf->size);
-+// 			if (popnum == 0)
-+// 				break;
-+// 
-+// 			popped = buf_pop (buf, dest, popnum);
-+// 			if (popped == 0)
-+// 				break;
-+// 			current_urb->actual_length += popped;
-+// 			total += popped;
-+// 
-+// 			/* If endpoint->last == 0, then transfers have 
-+// 			 * not started on this endpoint 
-+// 			 */
-+// 			if (endpoint->last == 0) {
-+// 				if(udc_endpoint_write (endpoint)){
-+// 					/* Write pre-empted by RX */
-+// 					return -1;
-+// 				}
-+// 			}
-+// 
-+// 		}/* end while */
-+// 		return total;
-+// 	}
-+// 
-+// 	return 0;
-+// }
- 
--		struct usb_endpoint_instance *endpoint =
--			&endpoint_instance[TX_ENDPOINT];
--		struct urb *current_urb = NULL;
--		char *dest;
--
--		int space_avail;
--		int popnum, popped;
--		int total = 0;
--
--		/* Break buffer into urb sized pieces, and link each to the endpoint */
--		while (buf->size > 0) {
--			current_urb = next_urb (device_instance, endpoint);
--			if (!current_urb) {
--				TTYERR ("current_urb is NULL, buf->size %d\n",
--					buf->size);
--				return total;
--			}
--
--			dest = current_urb->buffer +
--				current_urb->actual_length;
--
--			space_avail =
--				current_urb->buffer_length -
--				current_urb->actual_length;
--			popnum = MIN (space_avail, buf->size);
--			if (popnum == 0)
--				break;
--
--			popped = buf_pop (buf, dest, popnum);
--			if (popped == 0)
--				break;
--			current_urb->actual_length += popped;
--			total += popped;
--
--			/* If endpoint->last == 0, then transfers have not started on this endpoint */
--			if (endpoint->last == 0) {
--				udc_endpoint_write (endpoint);
--			}
--
--		}		/* end while */
--		return total;
--	}			/* end if tx_urb */
-+static int fill_buffer (circbuf_t * buf)
-+{
-+        struct usb_endpoint_instance *endpoint =
-+                &endpoint_instance[rx_endpoint];
- 
--	return 0;
--}
-+        if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) {
-+		unsigned int nb = endpoint->rcv_urb->actual_length;
-+                char *src = (char *) endpoint->rcv_urb->buffer;
- 
-+                buf_push (buf, src, nb);
-+                endpoint->rcv_urb->actual_length = 0;
-+
-+		TTYDBG ("nb= %d",nb);
-+                return nb;
-+        }
-+
-+        return 0;
-+}
-+/*
- static int fill_buffer (circbuf_t * buf)
- {
- 	struct usb_endpoint_instance *endpoint =
--		&endpoint_instance[RECV_ENDPOINT];
-+		&endpoint_instance[rx_endpoint];
- 
- 	if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) {
--		unsigned int nb = endpoint->rcv_urb->actual_length;
-+		unsigned int nb = 0; 
- 		char *src = (char *) endpoint->rcv_urb->buffer;
-+		unsigned int rx_avail = buf->totalsize - buf->size;
- 
--		buf_push (buf, src, nb);
--		endpoint->rcv_urb->actual_length = 0;
-+		if(rx_avail >= endpoint->rcv_urb->actual_length){
- 
-+			nb = endpoint->rcv_urb->actual_length;
-+			buf_push (buf, src, nb);
-+			endpoint->rcv_urb->actual_length = 0;
-+			
-+		}
- 		return nb;
- 	}
--
- 	return 0;
- }
--
-+*/
- static int usbtty_configured (void)
- {
- 	return usbtty_configured_flag;
- }
- 
--/*********************************************************************************/
-+/******************************************************************************/
- 
- static void usbtty_event_handler (struct usb_device_instance *device,
- 				  usb_device_event_t event, int data)
-@@ -619,8 +1036,34 @@
- 	}
- }
- 
--/*********************************************************************************/
-+/******************************************************************************/
- 
-+int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb)
-+{
-+	switch (request->bRequest){
-+
-+	   	case ACM_SET_CONTROL_LINE_STATE:	/* Implies DTE ready */
-+			break;
-+	   	case ACM_SEND_ENCAPSULATED_COMMAND :	/* Required */
-+			break;
-+		case ACM_SET_LINE_ENCODING :		/* DTE stop/parity bits
-+							 * per character */		
-+			break;
-+	   	case ACM_GET_ENCAPSULATED_RESPONSE :	/* request response */
-+			break;
-+		case ACM_GET_LINE_ENCODING :		/* request DTE rate,
-+							 * stop/parity bits */
-+			memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc));
-+			urb->actual_length = sizeof(rs232_desc);
-+
-+			break;
-+	 	default:
-+			return 1;
-+	}
-+	return 0;
-+}
-+
-+/******************************************************************************/
- 
- /*
-  * Since interrupt handling has not yet been implemented, we use this function
-@@ -630,36 +1073,29 @@
- void usbtty_poll (void)
- {
- 	/* New interrupts? */
--	pretend_interrupts ();
-+	udc_irq();
- 
--	/* Write any output data to host buffer (do this before checking interrupts to avoid missing one) */
-+	/* Write any output data to host buffer 
-+	 * (do this before checking interrupts to avoid missing one) 
-+	 */
- 	if (usbtty_configured ()) {
- 		write_buffer (&usbtty_output);
- 	}
- 
- 	/* New interrupts? */
--	pretend_interrupts ();
--
--	/* Check for new data from host.. (do this after checking interrupts to get latest data) */
-+	udc_irq();
-+	
-+	/* Check for new data from host.. 
-+	 * (do this after checking interrupts to get latest data) 
-+	 */
- 	if (usbtty_configured ()) {
- 		fill_buffer (&usbtty_input);
- 	}
- 
- 	/* New interrupts? */
--	pretend_interrupts ();
--}
-+	udc_irq();
- 
--static void pretend_interrupts (void)
--{
--	/* Loop while we have interrupts.
--	 * If we don't do this, the input chain
--	 * polling delay is likely to miss
--	 * host requests.
--	 */
--	while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
--		/* Handle any new IRQs */
--		omap1510_udc_irq ();
--		omap1510_udc_noniso_irq ();
--	}
- }
-+
-+
- #endif
-Index: u-boot/drivers/usbtty.h
-===================================================================
---- u-boot.orig/drivers/usbtty.h	2007-02-08 21:11:27.000000000 +0100
-+++ u-boot/drivers/usbtty.h	2007-02-08 21:11:55.000000000 +0100
-@@ -2,6 +2,9 @@
-  * (C) Copyright 2003
-  * Gerry Hamel, geh@ti.com, Texas Instruments
-  *
-+ * (C) Copyright 2006
-+ * Bryan O'Donoghue, bodonoghue <at> codehermit.ie, CodeHermit
-+ *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2 of the License, or
-@@ -21,44 +24,49 @@
- #ifndef __USB_TTY_H__
- #define __USB_TTY_H__
- 
--
- #include "usbdcore.h"
-+#if defined(CONFIG_PPC)
-+#include "usbdcore_mpc8xx.h"
-+#elif defined(CONFIG_OMAP1510)
- #include "usbdcore_omap1510.h"
-+#endif
- 
-+#include <config.h>
-+#include <version.h>
- 
--#define NUM_CONFIGS    1
--#define NUM_INTERFACES 1
--#define NUM_ENDPOINTS  3
-+/* If no VendorID/ProductID is defined in config.h, pretend to be Linux 
-+ * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
- 
--#define EP0_MAX_PACKET_SIZE 64
-+#ifndef CONFIG_USBD_VENDORID
-+#define CONFIG_USBD_VENDORID 0x0525 	/* Linux/NetChip */
-+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6	/* gserial */
-+#define CONFIG_USBD_PRODUCTID_CDCACM  0xa4a7	/* CDC ACM */
-+#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
-+#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
-+#endif /* CONFIG_USBD_VENDORID */
- 
- #define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
--#define CONFIG_USBD_INTERFACE_STR     "Simple Serial Data Interface - Bulk Mode"
--
--
--#define CONFIG_USBD_SERIAL_OUT_ENDPOINT 2
--#define CONFIG_USBD_SERIAL_OUT_PKTSIZE	64
--#define CONFIG_USBD_SERIAL_IN_ENDPOINT	1
--#define CONFIG_USBD_SERIAL_IN_PKTSIZE	64
--#define CONFIG_USBD_SERIAL_INT_ENDPOINT 5
--#define CONFIG_USBD_SERIAL_INT_PKTSIZE	16
- 
-+#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT 
-+#define CONFIG_USBD_SERIAL_OUT_PKTSIZE	UDC_OUT_PACKET_SIZE
-+#define CONFIG_USBD_SERIAL_IN_ENDPOINT	UDC_IN_ENDPOINT
-+#define CONFIG_USBD_SERIAL_IN_PKTSIZE	UDC_IN_PACKET_SIZE
-+#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
-+#define CONFIG_USBD_SERIAL_INT_PKTSIZE	UDC_INT_PACKET_SIZE
-+#define CONFIG_USBD_SERIAL_BULK_PKTSIZE	UDC_BULK_PACKET_SIZE
- 
- #define USBTTY_DEVICE_CLASS	COMMUNICATIONS_DEVICE_CLASS
--#define USBTTY_DEVICE_SUBCLASS	COMMUNICATIONS_NO_SUBCLASS
--#define USBTTY_DEVICE_PROTOCOL	COMMUNICATIONS_NO_PROTOCOL
- 
--#define USBTTY_INTERFACE_CLASS	   0xFF /* Vendor Specific */
--#define USBTTY_INTERFACE_SUBCLASS  0x02
--#define USBTTY_INTERFACE_PROTOCOL  0x01
--
--#define USBTTY_BCD_DEVICE 0x0
--#define USBTTY_MAXPOWER	  0x0
--
--#define STR_MANUFACTURER 1
--#define STR_PRODUCT	 2
--#define STR_SERIAL	 3
--#define STR_CONFIG	 4
--#define STR_INTERFACE	 5
-+#define USBTTY_BCD_DEVICE	0x00
-+#define USBTTY_MAXPOWER  	0x00
-+
-+#define STR_LANG		0x00
-+#define STR_MANUFACTURER	0x01
-+#define STR_PRODUCT		0x02
-+#define STR_SERIAL		0x03
-+#define STR_CONFIG		0x04
-+#define STR_DATA_INTERFACE	0x05
-+#define STR_CTRL_INTERFACE	0x06
-+#define STR_COUNT		0x07
- 
- #endif
-Index: u-boot/drivers/usbdcore_omap1510.c
-===================================================================
---- u-boot.orig/drivers/usbdcore_omap1510.c	2007-02-08 21:11:27.000000000 +0100
-+++ u-boot/drivers/usbdcore_omap1510.c	2007-02-08 21:11:55.000000000 +0100
-@@ -960,7 +960,7 @@
- /* Handle general USB interrupts and dispatch according to type.
-  * This function implements TRM Figure 14-13.
-  */
--void omap1510_udc_irq (void)
-+static void omap1510_udc_irq (void)
- {
- 	u16 irq_src = inw (UDC_IRQ_SRC);
- 	int valid_irq = 0;
-@@ -1000,7 +1000,7 @@
- }
- 
- /* This function implements TRM Figure 14-26. */
--void omap1510_udc_noniso_irq (void)
-+static void omap1510_udc_noniso_irq (void)
- {
- 	unsigned short epnum;
- 	unsigned short irq_src = inw (UDC_IRQ_SRC);
-@@ -1054,6 +1054,20 @@
- 			       irq_src);
- }
- 
-+void udc_irq(void)
-+{
-+	/* Loop while we have interrupts.
-+	 * If we don't do this, the input chain
-+	 * polling delay is likely to miss
-+	 * host requests.
-+	 */
-+	while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
-+		/* Handle any new IRQs */
-+		omap1510_udc_irq ();
-+		omap1510_udc_noniso_irq ();
-+	}
-+}
-+
- /*
- -------------------------------------------------------------------------------
- */
-Index: u-boot/include/usb_cdc_acm.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ u-boot/include/usb_cdc_acm.h	2007-02-08 21:11:55.000000000 +0100
-@@ -0,0 +1,43 @@
-+/*
-+ * (C) Copyright 2006
-+ * Bryan O'Donoghue, deckard <at> codehermit.ie, CodeHermit
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+/* ACM Control Requests */
-+#define ACM_SEND_ENCAPSULATED_COMMAND	0x00
-+#define ACM_GET_ENCAPSULATED_RESPONSE	0x01
-+#define ACM_SET_COMM_FEATURE		0x02
-+#define ACM_GET_COMM_FEATRUE		0x03
-+#define ACM_CLEAR_COMM_FEATURE		0x04
-+#define ACM_SET_LINE_ENCODING		0x20
-+#define ACM_GET_LINE_ENCODING		0x21
-+#define ACM_SET_CONTROL_LINE_STATE	0x22
-+#define ACM_SEND_BREAK			0x23
-+
-+/* ACM Notification Codes */
-+#define ACM_NETWORK_CONNECTION		0x00
-+#define ACM_RESPONSE_AVAILABLE		0x01
-+#define ACM_SERIAL_STATE		0x20
-+
-+/* Format of response expected by a ACM_GET_LINE_ENCODING request */ 
-+struct rs232_emu{
-+		unsigned long dter;
-+		unsigned char stop_bits;
-+		unsigned char parity;
-+		unsigned char data_bits;
-+}__attribute__((packed));
-Index: u-boot/include/usbdcore_omap1510.h
-===================================================================
---- u-boot.orig/include/usbdcore_omap1510.h	2007-02-08 21:11:27.000000000 +0100
-+++ u-boot/include/usbdcore_omap1510.h	2007-02-08 21:11:55.000000000 +0100
-@@ -161,13 +161,23 @@
- #define UDC_VBUS_CTRL	    (1 << 19)
- #define UDC_VBUS_MODE	    (1 << 18)
- 
--
--void omap1510_udc_irq(void);
--void omap1510_udc_noniso_irq(void);
--
-+/* OMAP Endpoint parameters */
-+#define EP0_MAX_PACKET_SIZE 64
-+#define UDC_OUT_ENDPOINT 2
-+#define UDC_OUT_PACKET_SIZE 64
-+#define UDC_IN_ENDPOINT		1
-+#define UDC_IN_PACKET_SIZE 64
-+#define UDC_INT_ENDPOINT 5
-+#define UDC_INT_PACKET_SIZE	16
-+#define UDC_BULK_PACKET_SIZE	16
-+
-+void udc_irq (void);
-+/* Flow control */
-+void udc_set_nak(int epid);
-+void udc_unset_nak (int epid);
- 
- /* Higher level functions for abstracting away from specific device */
--void udc_endpoint_write(struct usb_endpoint_instance *endpoint);
-+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
- 
- int  udc_init (void);
- 
-Index: u-boot/include/usbdescriptors.h
-===================================================================
---- u-boot.orig/include/usbdescriptors.h	2007-02-08 21:11:27.000000000 +0100
-+++ u-boot/include/usbdescriptors.h	2007-02-08 21:11:55.000000000 +0100
-@@ -92,15 +92,17 @@
- #define COMMUNICATIONS_DEVICE_CLASS	0x02
- 
- /* c.f. CDC 4.2 Table 15 */
--#define COMMUNICATIONS_INTERFACE_CLASS	0x02
-+#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL	0x02
-+#define COMMUNICATIONS_INTERFACE_CLASS_DATA	0x0A
-+#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR	0x0FF
- 
- /* c.f. CDC 4.3 Table 16 */
--#define COMMUNICATIONS_NO_SUBCLASS	0x00
-+#define COMMUNICATIONS_NO_SUBCLASS            0x00
- #define COMMUNICATIONS_DLCM_SUBCLASS	0x01
--#define COMMUNICATIONS_ACM_SUBCLASS	0x02
--#define COMMUNICATIONS_TCM_SUBCLASS	0x03
-+#define COMMUNICATIONS_ACM_SUBCLASS           0x02
-+#define COMMUNICATIONS_TCM_SUBCLASS           0x03
- #define COMMUNICATIONS_MCCM_SUBCLASS	0x04
--#define COMMUNICATIONS_CCM_SUBCLASS	0x05
-+#define COMMUNICATIONS_CCM_SUBCLASS           0x05
- #define COMMUNICATIONS_ENCM_SUBCLASS	0x06
- #define COMMUNICATIONS_ANCM_SUBCLASS	0x07
- 
-@@ -110,15 +112,22 @@
- #define COMMUNICATIONS_MDLM_SUBCLASS	0x0a
- #define COMMUNICATIONS_OBEX_SUBCLASS	0x0b
- 
--/* c.f. CDC 4.6 Table 18 */
-+/* c.f. CDC 4.4 Table 17 */
-+#define COMMUNICATIONS_NO_PROTOCOL            0x00
-+#define COMMUNICATIONS_V25TER_PROTOCOL        0x01    /*Common AT Hayes compatible*/
-+
-+/* c.f. CDC 4.5 Table 18 */
- #define DATA_INTERFACE_CLASS		0x0a
- 
-+/* c.f. CDC 4.6 No Table */
-+#define DATA_INTERFACE_SUBCLASS_NONE  0x00    /* No subclass pertinent */
-+
- /* c.f. CDC 4.7 Table 19 */
--#define COMMUNICATIONS_NO_PROTOCOL	0x00
-+#define DATA_INTERFACE_PROTOCOL_NONE  0x00    /* No class protcol required */
- 
- 
- /* c.f. CDC 5.2.3 Table 24 */
--#define CS_INTERFACE			0x24
-+#define CS_INTERFACE          0x24
- #define CS_ENDPOINT			0x25
- 
- /*
-@@ -128,7 +137,7 @@
-  * c.f. WMCD 5.3 Table 5.3
-  */
- 
--#define USB_ST_HEADER			0x00
-+#define USB_ST_HEADER         0x00
- #define USB_ST_CMF			0x01
- #define USB_ST_ACMF			0x02
- #define USB_ST_DLMF			0x03
-@@ -137,18 +146,18 @@
- #define USB_ST_UF			0x06
- #define USB_ST_CSF			0x07
- #define USB_ST_TOMF			0x08
--#define USB_ST_USBTF			0x09
-+#define USB_ST_USBTF          0x09
- #define USB_ST_NCT			0x0a
- #define USB_ST_PUF			0x0b
- #define USB_ST_EUF			0x0c
- #define USB_ST_MCMF			0x0d
- #define USB_ST_CCMF			0x0e
- #define USB_ST_ENF			0x0f
--#define USB_ST_ATMNF			0x10
-+#define USB_ST_ATMNF          0x10
- 
- #define USB_ST_WHCM			0x11
- #define USB_ST_MDLM			0x12
--#define USB_ST_MDLMD			0x13
-+#define USB_ST_MDLMD          0x13
- #define USB_ST_DMM			0x14
- #define USB_ST_OBEX			0x15
- #define USB_ST_CS			0x16
-@@ -312,7 +321,8 @@
- 	u8 bDescriptorType;
- 	u8 bDescriptorSubtype;	/* 0x06 */
- 	u8 bMasterInterface;
--	u8 bSlaveInterface0[0];
-+      //u8 bSlaveInterface0[0];
-+      u8 bSlaveInterface0;
- } __attribute__ ((packed));
- 
- struct usb_class_country_selection_descriptor {
-Index: u-boot/include/usbdcore.h
-===================================================================
---- u-boot.orig/include/usbdcore.h	2007-02-08 21:11:27.000000000 +0100
-+++ u-boot/include/usbdcore.h	2007-02-08 21:11:55.000000000 +0100
-@@ -576,6 +576,9 @@
- 
- 	void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data);
- 
-+	/* Do cdc device specific control requests */
-+	int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb);
-+
- 	/* bus interface */
- 	struct usb_bus_instance *bus;	/* which bus interface driver */
- 
-Index: u-boot/drivers/usbdcore_ep0.c
-===================================================================
---- u-boot.orig/drivers/usbdcore_ep0.c	2007-02-08 21:12:05.000000000 +0100
-+++ u-boot/drivers/usbdcore_ep0.c	2007-02-08 21:12:08.000000000 +0100
-@@ -223,7 +223,6 @@
- 
- 	case USB_DESCRIPTOR_TYPE_CONFIGURATION:
- 		{
--			int bNumInterface;
- 			struct usb_configuration_descriptor
- 				*configuration_descriptor;
- 			struct usb_device_descriptor *device_descriptor;
-@@ -256,105 +255,6 @@
- 					     usb_configuration_descriptor),
- 				     max);
- 
--
--			/* iterate across interfaces for specified configuration */
--			dbg_ep0 (0, "bNumInterfaces: %d",
--				 configuration_descriptor->bNumInterfaces);
--			for (bNumInterface = 0;
--			     bNumInterface <
--			     configuration_descriptor->bNumInterfaces;
--			     bNumInterface++) {
--
--				int bAlternateSetting;
--				struct usb_interface_instance
--					*interface_instance;
--
--				dbg_ep0 (3, "[%d] bNumInterfaces: %d",
--					 bNumInterface,
--					 configuration_descriptor->bNumInterfaces);
--
--				if (! (interface_instance = usbd_device_interface_instance (device,
--								     port, index, bNumInterface)))
--				{
--					dbg_ep0 (3, "[%d] interface_instance NULL",
--						 bNumInterface);
--					return -1;
--				}
--				/* iterate across interface alternates */
--				for (bAlternateSetting = 0;
--				     bAlternateSetting < interface_instance->alternates;
--				     bAlternateSetting++) {
--					/*int class; */
--					int bNumEndpoint;
--					struct usb_interface_descriptor *interface_descriptor;
--
--					struct usb_alternate_instance *alternate_instance;
--
--					dbg_ep0 (3, "[%d:%d] alternates: %d",
--						 bNumInterface,
--						 bAlternateSetting,
--						 interface_instance->alternates);
--
--					if (! (alternate_instance = usbd_device_alternate_instance (device, port, index, bNumInterface, bAlternateSetting))) {
--						dbg_ep0 (3, "[%d] alternate_instance NULL",
--							 bNumInterface);
--						return -1;
--					}
--					/* copy descriptor for this interface */
--					copy_config (urb, alternate_instance->interface_descriptor,
--						     sizeof (struct usb_interface_descriptor),
--						     max);
--
--					/*dbg_ep0(3, "[%d:%d] classes: %d endpoints: %d", bNumInterface, bAlternateSetting, */
--					/*        alternate_instance->classes, alternate_instance->endpoints); */
--
--					/* iterate across classes for this alternate interface */
--#if 0
--					for (class = 0;
--					     class < alternate_instance->classes;
--					     class++) {
--						struct usb_class_descriptor *class_descriptor;
--						/*dbg_ep0(3, "[%d:%d:%d] classes: %d", bNumInterface, bAlternateSetting, */
--						/*        class, alternate_instance->classes); */
--						if (!(class_descriptor = usbd_device_class_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, class))) {
--							dbg_ep0 (3, "[%d] class NULL",
--								 class);
--							return -1;
--						}
--						/* copy descriptor for this class */
--						copy_config (urb, class_descriptor,
--							sizeof (struct usb_class_descriptor),
--							max);
--					}
--#endif
--
--					/* iterate across endpoints for this alternate interface */
--					interface_descriptor = alternate_instance->interface_descriptor;
--					for (bNumEndpoint = 0;
--					     bNumEndpoint < alternate_instance->endpoints;
--					     bNumEndpoint++) {
--						struct usb_endpoint_descriptor *endpoint_descriptor;
--						dbg_ep0 (3, "[%d:%d:%d] endpoint: %d",
--							 bNumInterface,
--							 bAlternateSetting,
--							 bNumEndpoint,
--							 interface_descriptor->
--							 bNumEndpoints);
--						if (!(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, bNumEndpoint))) {
--							dbg_ep0 (3, "[%d] endpoint NULL",
--								 bNumEndpoint);
--							return -1;
--						}
--						/* copy descriptor for this endpoint */
--						copy_config (urb, endpoint_descriptor,
--							     sizeof (struct usb_endpoint_descriptor),
--							     max);
--					}
--				}
--			}
--			dbg_ep0 (3, "lengths: %d %d",
--				 le16_to_cpu (configuration_descriptor->wTotalLength),
--				 urb->actual_length);
- 		}
- 		break;
- 
-@@ -363,6 +263,7 @@
- 			struct usb_string_descriptor *string_descriptor;
- 
- 			if (!(string_descriptor = usbd_get_string (index))) {
-+				dbg_ep0(0, "Invalid string index %u\n", index);
- 				return -1;
- 			}
- 			/*dbg_ep0(3, "string_descriptor: %p", string_descriptor); */
-@@ -495,6 +396,8 @@
- 
- 	/* handle USB Standard Request (c.f. USB Spec table 9-2) */
- 	if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
-+		if (device->device_state <= STATE_CONFIGURED)
-+			return device->cdc_recv_setup(request, urb);
- 		dbg_ep0 (1, "non standard request: %x",
- 			 request->bmRequestType & USB_REQ_TYPE_MASK);
- 		return -1;	/* Stall here */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/unbusy-i2c.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/unbusy-i2c.patch
deleted file mode 100644
index 680b301620..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/unbusy-i2c.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-board/neo1973/gta01/gta01.c: added logic to detect pending PMU interrupts
-board/neo1973/gta01/gta01.c (neo1973_new_second, neo1973_on_key_pressed): only
-  poll PMU if there is a pending interrupt
-board/neo1973/gta01/pcf50606.c (pcf50606_initial_regs): cleared (unmasked)
-  SECONDM in INT1M
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/board/neo1973/gta01/gta01.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/gta01.c
-+++ u-boot/board/neo1973/gta01/gta01.c
-@@ -375,19 +375,60 @@
- #endif
- }
- 
-+static int pwr_int_pending(void)
-+{
-+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+#if defined(CONFIG_ARCH_GTA01B_v4)
-+	return !(gpio->GPGDAT & (1 << 1));	/* EINT9/GPG1 */
-+#else
-+	return !(gpio->GPGDAT & (1 << 8));	/* EINT16/GPG8 */
-+#endif /* !CONFIG_ARCH_GTA01B_v4 */
-+}
-+
-+static int have_int1(uint8_t mask)
-+{
-+	static uint8_t pending = 0;
-+
-+	if (pwr_int_pending()) {
-+		/*
-+		 * We retrieve all interupts, so that we clear any stray ones
-+		 * in INT2 and INT3.
-+		 */
-+		uint8_t int1,int2,int3;
-+
-+		int1 = pcf50606_reg_read(PCF50606_REG_INT1);
-+		int2 = pcf50606_reg_read(PCF50606_REG_INT2);
-+		int3 = pcf50606_reg_read(PCF50606_REG_INT3);
-+		pending |= int1;
-+	}
-+	if (!(pending & mask))
-+		return 0;
-+	pending &= ~mask;
-+	return 1;
-+}
-+
- int neo1973_new_second(void)
- {
--	return pcf50606_reg_read(PCF50606_REG_INT1) & PCF50606_INT1_SECOND;
-+	return have_int1(PCF50606_INT1_SECOND);
- }
- 
- int neo1973_on_key_pressed(void)
- {
--	return !(pcf50606_reg_read(PCF50606_REG_OOCS) & PFC50606_OOCS_ONKEY);
-+	static int pressed = -1;
-+
-+	if (pressed == -1 ||
-+	    have_int1(PCF50606_INT1_ONKEYF | PCF50606_INT1_ONKEYR)) {
-+		pressed = !(pcf50606_reg_read(PCF50606_REG_OOCS) &
-+		     PFC50606_OOCS_ONKEY);
-+}
-+	return pressed;
- }
- 
- int neo1973_aux_key_pressed(void)
- {
- 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
- 	if (gpio->GPFDAT & (1 << 6))
- 		return 0;
- 	return 1;
-Index: u-boot/board/neo1973/gta01/pcf50606.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/pcf50606.c
-+++ u-boot/board/neo1973/gta01/pcf50606.c
-@@ -6,7 +6,7 @@
- const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = {
- 	[PCF50606_REG_OOCS] 	= 0x00,
- 	/* gap */
--	[PCF50606_REG_INT1M]	= PCF50606_INT1_SECOND,
-+	[PCF50606_REG_INT1M]	= 0x00,
- 	[PCF50606_REG_INT2M]	= 0x00,
- 	[PCF50606_REG_INT3M]	= PCF50606_INT3_TSCPRES,
- 	[PCF50606_REG_OOCC1] 	= PCF50606_OOCC1_RTCWAK |
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/usbdcore-multiple_configs.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/usbdcore-multiple_configs.patch
deleted file mode 100644
index 339289699a..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/usbdcore-multiple_configs.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-This patch fixes bugs in usbdcore*.c related to the use of devices
-with multiple configurations.
-
-The original code made mistakes about the meaning of configuration value and
-configuration index, and the resulting off-by-one errors resulted in:
-
-* SET_CONFIGURATION always selected the first configuration, no matter what
-  wValue is being passed.
-* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
-  configuration (index 0).
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/drivers/usbdcore_ep0.c
-===================================================================
---- u-boot.orig/drivers/usbdcore_ep0.c	2007-03-14 20:29:05.000000000 +0100
-+++ u-boot/drivers/usbdcore_ep0.c	2007-03-14 20:29:06.000000000 +0100
-@@ -233,8 +233,8 @@
- 				return -1;
- 			}
- 			/*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
--			if (index > device_descriptor->bNumConfigurations) {
--				dbg_ep0 (0, "index too large: %d > %d", index,
-+			if (index >= device_descriptor->bNumConfigurations) {
-+				dbg_ep0 (0, "index too large: %d >= %d", index,
- 					 device_descriptor->
- 					 bNumConfigurations);
- 				return -1;
-@@ -593,13 +593,8 @@
- 
- 		case USB_REQ_SET_CONFIGURATION:
- 			/* c.f. 9.4.7 - the top half of wValue is reserved */
--			/* */
--			if ((device->configuration =
--			     le16_to_cpu (request->wValue) & 0x7f) != 0) {
--				/* c.f. 9.4.7 - zero is the default or addressed state, in our case this */
--				/* is the same is configuration zero */
--				device->configuration = 0;	/* TBR - ?????? */
--			}
-+			device->configuration = le16_to_cpu(request->wValue) & 0xff;
-+
- 			/* reset interface and alternate settings */
- 			device->interface = device->alternate = 0;
- 
-Index: u-boot/drivers/usbdcore.c
-===================================================================
---- u-boot.orig/drivers/usbdcore.c	2007-03-14 20:29:05.000000000 +0100
-+++ u-boot/drivers/usbdcore.c	2007-03-14 20:37:37.000000000 +0100
-@@ -147,12 +147,9 @@
- static struct usb_configuration_instance *usbd_device_configuration_instance (struct usb_device_instance *device,
- 		unsigned int port, unsigned int configuration)
- {
--	/* XXX */
--	configuration = configuration ? configuration - 1 : 0;
--
--	if (configuration >= device->configurations) {
-+	if (configuration >= device->configurations)
- 		return NULL;
--	}
-+
- 	return device->configuration_instance_array + configuration;
- }
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/wakeup-reason-nand-only.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/wakeup-reason-nand-only.patch
deleted file mode 100644
index 132a9f8da5..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/wakeup-reason-nand-only.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-This patch should get rid of spurious poweroff after booting from RAM.
-Experimental.
-
-cpu/arm920t/start.S: record in global variable "booted_from_nand" whether we
-  booted from NAND or not
-board/neo1973/neo1973.c (board_late_init): if booted from RAM, assume that
-  wakeup cause was "reset", and skip poweroff check
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/board/neo1973/gta01/gta01.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/gta01.c
-+++ u-boot/board/neo1973/gta01/gta01.c
-@@ -226,12 +226,16 @@
- 
- int board_late_init(void)
- {
-+	extern unsigned char booted_from_nand;
- 	unsigned char tmp;
- 	char buf[32];
- 
- 	/* Initialize the Power Management Unit with a safe register set */
- 	pcf50606_init();
- 
-+	if (!booted_from_nand)
-+		goto woken_by_reset;
-+
- 	/* obtain wake-up reason, save INT1 in environment */
- 	tmp = pcf50606_reg_read(PCF50606_REG_INT1);
- 	sprintf(buf, "0x%02x", tmp);
-@@ -274,6 +278,7 @@
- 		neo1973_poweroff();
- 	}
- 
-+woken_by_reset:
- 	/* if there's no other reason, must be regular reset */
- 	neo1973_wakeup_cause = NEO1973_WAKEUP_RESET;
- 
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -77,6 +77,14 @@
-  *************************************************************************
-  */
- 
-+#ifdef CONFIG_S3C2410_NAND_BOOT
-+.globl	booted_from_nand
-+booted_from_nand:
-+	.word	0
-+_booted_from_nand:
-+	.word	booted_from_nand
-+#endif /* CONFIG_S3C2410_NAND_BOOT */
-+
- _TEXT_BASE:
- 	.word	TEXT_BASE
- 
-@@ -281,6 +289,9 @@
- #endif
- 1:	b	1b
- done_nand_read:
-+	ldr	r0, _booted_from_nand
-+	mov	r1, #1
-+	strb	r1, [r0]
- #endif /* CONFIG_S3C2410_NAND_BOOT */
- done_relocate:
- #endif /* CONFIG_SKIP_RELOCATE_UBOOT */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native_oe.bb b/recipes/u-boot/u-boot-mkimage-openmoko-native_oe.bb
deleted file mode 100644
index 0256ef318c..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native_oe.bb
+++ /dev/null
@@ -1,86 +0,0 @@
-require u-boot-openmoko_git.bb
-
-inherit native
-
-PV = "1.2.0+git9912121f7ed804ea58fd62f3f230b5dcfc357d88svn2238"
-PR = "r1"
-
-SRC_URI = "git://git.denx.de/u-boot.git;protocol=git;tag=9912121f7ed804ea58fd62f3f230b5dcfc357d88 \
-file://uboot-machtypes.patch \
-file://ext2load_hex.patch \
-file://uboot-s3c2410-warnings-fix.patch \
-file://uboot-strtoul.patch \
-file://uboot-cramfs_but_no_jffs2.patch \
-file://nand-read_write_oob.patch \
-file://uboot-arm920t-gd_in_irq.patch \
-file://uboot-arm920_s3c2410_irq_demux.patch \
-file://uboot-s3c2410-nand.patch \
-file://uboot-cmd_s3c2410.patch \
-file://uboot-s3c2410-mmc.patch \
-file://env_nand_oob.patch \
-file://dynenv-harden.patch \
-file://uboot-s3c2410_fb.patch \
-file://uboot-20061030-qt2410.patch \
-file://uboot-20061030-neo1973.patch \
-file://uboot-s3c2410-misccr-definitions.patch \
-file://boot-from-ram-reloc.patch \
-file://boot-from-ram-and-nand.patch \
-file://wakeup-reason-nand-only.patch \
-file://uboot-neo1973-resume.patch \
-file://nand-dynamic_partitions.patch \
-file://uboot-s3c2410-norelocate_irqvec_cpy.patch \
-file://uboot-usbtty-acm.patch \
-file://uboot-s3c2410_udc.patch \
-file://bbt-create-optional.patch \
-file://nand-createbbt.patch \
-file://dontask.patch \
-file://nand-badisbad.patch \
-file://uboot-bbt-quiet.patch \
-file://raise-limits.patch \
-file://splashimage-command.patch \
-file://cmd-unzip.patch \
-file://enable-splash-bmp.patch \
-file://preboot-override.patch \
-file://lowlevel_foo.patch \
-file://default-env.patch \
-file://console-ansi.patch \
-file://boot-menu.patch \
-file://uboot-dfu.patch \
-file://uboot-neo1973-defaultenv.patch \
-file://uboot-nand-markbad-reallybad.patch \
-file://usbdcore-multiple_configs.patch \
-file://neo1973-chargefast.patch \
-file://uboot-s3c2440.patch \
-file://uboot-smdk2440.patch \
-file://uboot-hxd8.patch \
-file://uboot-license.patch \
-file://uboot-gta02.patch \
-file://uboot-s3c2443.patch \
-file://uboot-smdk2443.patch \
-file://unbusy-i2c.patch \
-file://makefile-no-dirafter.patch \
-"
-
-PROVIDES = ""
-TARGET_LDFLAGS = ""
-
-do_quilt() {
-:
-}
-
-do_compile () {
-        chmod +x board/neo1973/gta01/split_by_variant.sh
-        oe_runmake gta01bv3_config
-        oe_runmake clean
-        oe_runmake tools
-}
-
-do_stage () {
-        install -m 0755 tools/mkimage ${STAGING_BINDIR}/uboot-mkimage
-        ln -sf ${STAGING_BINDIR}/uboot-mkimage ${STAGING_BINDIR}/mkimage
-}
-
-do_deploy () {
-:
-}
-
diff --git a/recipes/u-boot/u-boot.inc b/recipes/u-boot/u-boot.inc
index 661bf3645d..d19716c0bd 100644
--- a/recipes/u-boot/u-boot.inc
+++ b/recipes/u-boot/u-boot.inc
@@ -65,8 +65,3 @@ do_deploy () {
 }
 do_deploy[dirs] = "${S}"
 addtask deploy before do_build after do_compile
-
-do_stage() {
-	install -d ${STAGING_BINDIR_NATIVE}
-	install -m 755 tools/mkimage ${STAGING_BINDIR_NATIVE}/
-}