aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--busybox/busybox-1.00/openslug/defconfig0
-rw-r--r--busybox/switchbox-1.00/linuxrc36
-rw-r--r--busybox/switchbox_1.00.oe2
-rw-r--r--classes/nslu2_flashimg.oeclass8
-rw-r--r--conf/distro/openslug.conf17
-rw-r--r--conf/distro/unslung.conf2
-rw-r--r--ixp425-eth/ixp425-eth_1.1.oe3
-rw-r--r--ixp4xx/ixp4xx-csr/build-timing-annoyance.patch0
-rw-r--r--ixp4xx/ixp4xx-csr_1.4.oe6
-rw-r--r--linux/openslug-kernel-2.6.9/defconfig1098
-rw-r--r--meta/openslug-image.oe20
-rw-r--r--nslu2-binary-only/nslu2-switchbox-firmware.oe4
-rw-r--r--nslu2-binary-only/unslung-ramdisk-2.3r25/README249
-rw-r--r--nslu2-binary-only/unslung-ramdisk-2.3r25/linuxrc46
-rw-r--r--nslu2-binary-only/unslung-ramdisk-2.3r25/unslung.patch278
-rw-r--r--nslu2-binary-only/unslung-standard-ramdisk_2.3r25.oe4
16 files changed, 1721 insertions, 52 deletions
diff --git a/busybox/busybox-1.00/openslug/defconfig b/busybox/busybox-1.00/openslug/defconfig
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/busybox/busybox-1.00/openslug/defconfig
diff --git a/busybox/switchbox-1.00/linuxrc b/busybox/switchbox-1.00/linuxrc
index 70ad6855b6..858bac7258 100644
--- a/busybox/switchbox-1.00/linuxrc
+++ b/busybox/switchbox-1.00/linuxrc
@@ -5,36 +5,6 @@ mounted=
/bin/mount -t proc proc /proc
/bin/echo "0x0100" > /proc/sys/kernel/real-root-dev
-/bin/sleep 10
-
-if [ -z "$mounted" ] && /bin/mount -rt ext3 /dev/sda2 /mnt/tmpmnt ; then
-
- if [ -x /mnt/tmpmnt/bin/init ] &&
- [ -d /mnt/tmpmnt/unslung ] && [ -r /mnt/tmpmnt/.unslung ] ; then
- /bin/echo "Root filesystem will be mounted from /dev/sda2 ..."
- /bin/echo "Firmware Version: `/bin/cat /mnt/tmpmnt/.unslung`"
- mounted=/mnt/tmpmnt
- /bin/echo "0x0802" > /proc/sys/kernel/real-root-dev
- [ -r $mounted/unslung/rc.linuxrc ] && . $mounted/unslung/rc.linuxrc
- fi
-
- /bin/umount /mnt/tmpmnt
-fi
-
-if [ -z "$mounted" ] && /bin/mount -rt ext3 /dev/sdb2 /mnt/tmpmnt ; then
-
- if [ -x /mnt/tmpmnt/bin/init ] &&
- [ -d /mnt/tmpmnt/unslung ] && [ -r /mnt/tmpmnt/.unslung ] ; then
- /bin/echo "Root filesystem will be mounted from /dev/sdb2 ..."
- /bin/echo "Firmware Version: `/bin/cat /mnt/tmpmnt/.unslung`"
- mounted=/mnt/tmpmnt
- /bin/echo "0x0812" > /proc/sys/kernel/real-root-dev
- [ -r $mounted/unslung/rc.linuxrc ] && . $mounted/unslung/rc.linuxrc
- fi
-
- /bin/umount /mnt/tmpmnt
-fi
-
if [ -z "$mounted" ] && /bin/mount -rt jffs2 /dev/mtdblock4 /mnt/tmpmnt ; then
if [ -x /mnt/tmpmnt/sbin/init -o -x /mnt/tmpmnt/bin/init ] ; then
@@ -47,13 +17,11 @@ if [ -z "$mounted" ] && /bin/mount -rt jffs2 /dev/mtdblock4 /mnt/tmpmnt ; then
fi
if [ -z "$mounted" ] ; then
- if [ -x /mnt/tmpmnt/bin/init ] &&
- [ -d /mnt/tmpmnt/unslung ] && [ -r /mnt/tmpmnt/.unslung ] ; then
+
+ if [ -x /mnt/tmpmnt/sbin/init -o -x /mnt/tmpmnt/bin/init ] ; then
/bin/echo "Root filesystem will be mounted from /dev/ram0 ..."
- /bin/echo "Firmware Version: `/bin/cat /.unslung`"
mounted=/mnt/tmpmnt
/bin/echo "0x0100" > /proc/sys/kernel/real-root-dev
- [ -r $mounted/unslung/rc.linuxrc ] && . $mounted/unslung/rc.linuxrc
fi
fi
diff --git a/busybox/switchbox_1.00.oe b/busybox/switchbox_1.00.oe
index 2536e46eef..42b82d8a9d 100644
--- a/busybox/switchbox_1.00.oe
+++ b/busybox/switchbox_1.00.oe
@@ -5,7 +5,7 @@ HOMEPAGE = "http://www.busybox.net"
LICENSE = "GPL"
SECTION = "base"
PRIORITY = "required"
-PR = "r1"
+PR = "r2"
SRC_URI = "http://www.busybox.net/downloads/busybox-${PV}.tar.gz \
file://defconfig \
diff --git a/classes/nslu2_flashimg.oeclass b/classes/nslu2_flashimg.oeclass
index 8bca7ebf64..b71531a7f8 100644
--- a/classes/nslu2_flashimg.oeclass
+++ b/classes/nslu2_flashimg.oeclass
@@ -6,10 +6,14 @@ nslu2_pack_image () {
${STAGING_LIBDIR}/nslu2-binaries/switchbox.ext2.gz \
${DEPLOY_DIR_IMAGE}/slug/
install -m 0644 ${DEPLOY_DIR_IMAGE}/zImage-${IMAGE_BASENAME} ${DEPLOY_DIR_IMAGE}/slug/vmlinuz
- install -m 0644 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.gz ${DEPLOY_DIR_IMAGE}/slug/ramdisk.ext2.gz
+ if [ "${NSLU2_BUILD_RAMDISK_FIRMWARE}" == "1" ] ; then
+ install -m 0644 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.gz ${DEPLOY_DIR_IMAGE}/slug/ramdisk.ext2.gz
+ fi
install -m 0644 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 ${DEPLOY_DIR_IMAGE}/slug/flashdisk.jffs2
cd ${DEPLOY_DIR_IMAGE}/slug
- slugimage -p -r Ramdisk:ramdisk.ext2.gz -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ramdisk.img
+ if [ "${NSLU2_BUILD_RAMDISK_FIRMWARE}" == "1" ] ; then
+ slugimage -p -r Ramdisk:ramdisk.ext2.gz -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ramdisk.img
+ fi
slugimage -p -r Ramdisk:switchbox.ext2.gz,Flashdisk:flashdisk.jffs2 -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.flashdisk.img
rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2
rm -rf ${DEPLOY_DIR_IMAGE}/slug
diff --git a/conf/distro/openslug.conf b/conf/distro/openslug.conf
index 78a6975b66..f49eba243f 100644
--- a/conf/distro/openslug.conf
+++ b/conf/distro/openslug.conf
@@ -7,19 +7,28 @@ TARGET_OS = "linux-uclibc"
INHERIT += " package_ipk debian nslu2_flashimg"
-IMAGE_FSTYPES = "ext2.gz jffs2"
+IMAGE_FSTYPES = "jffs2"
OPENSLUG_DEVICE_TABLE = "${@oe.which(oe.data.getVar('OEPATH', d, 1), 'files/device_table-nslu2.txt')}"
-EXTRA_IMAGECMD_ext2.gz = "-f ${OPENSLUG_DEVICE_TABLE}"
EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x20000 -D ${OPENSLUG_DEVICE_TABLE}"
-BOOTSTRAP_EXTRA_DEPENDS += "virtual/kernel module-init-tools"
-BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-usbnet kernel-module-usbserial \
+OPENSLUG_EXTRA_DEPENDS += "virtual/kernel module-init-tools"
+OPENSLUG_EXTRA_RDEPENDS += "kernel-module-usbnet kernel-module-usbserial \
kernel-module-usbcore kernel-module-usb-storage kernel-module-ohci-hcd \
kernel-module-pegasus kernel-module-p8022 kernel-module-kaweth \
kernel-module-ehci-hcd \
kernel-module-scsi-mod kernel-module-sd-mod kernel-module-ext3 kernel-module-jbd \
module-init-tools"
+OPENSLUG_EXTRA_INSTALL += "kernel-module-usbnet kernel-module-usbserial \
+kernel-module-usbcore kernel-module-usb-storage kernel-module-ohci-hcd \
+kernel-module-pegasus kernel-module-p8022 kernel-module-kaweth \
+kernel-module-ehci-hcd \
+kernel-module-scsi-mod kernel-module-sd-mod kernel-module-ext3 kernel-module-jbd \
+module-init-tools"
+
+BOOTSTRAP_EXTRA_DEPENDS += "${OPENSLUG_EXTRA_DEPENDS}"
+BOOTSTRAP_EXTRA_RDEPENDS += "${OPENSLUG_EXTRA_RDEPENDS}"
+
PREFERRED_PROVIDER_virtual/kernel ?= "openslug-kernel"
PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross"
diff --git a/conf/distro/unslung.conf b/conf/distro/unslung.conf
index b005eb398f..dc06b61c68 100644
--- a/conf/distro/unslung.conf
+++ b/conf/distro/unslung.conf
@@ -8,7 +8,7 @@ TARGET_OS = "linux"
INHERIT += " package_ipk nslu2_flashimg"
IMAGE_FSTYPES = "ext2.gz jffs2"
-
+NSLU2_BUILD_RAMDISK_FIRMWARE = 1
UNSLUNG_DEVICE_TABLE = "${@oe.which(oe.data.getVar('OEPATH', d, 1), 'files/device_table-unslung.txt')}"
EXTRA_IMAGECMD_ext2.gz = "-f ${UNSLUNG_DEVICE_TABLE}"
EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x20000 -D ${UNSLUNG_DEVICE_TABLE}"
diff --git a/ixp425-eth/ixp425-eth_1.1.oe b/ixp425-eth/ixp425-eth_1.1.oe
index 0342e86b13..9cf39daa87 100644
--- a/ixp425-eth/ixp425-eth_1.1.oe
+++ b/ixp425-eth/ixp425-eth_1.1.oe
@@ -24,7 +24,6 @@ do_ixp425_c_patch_unpack () {
install -m 0644 ${DL_DIR}/ixp425_eth.c.patch ${WORKDIR}/
}
-#addtask ixp425_c_patch_unpack after do_unpack before do_patch
addtask ixp425_c_patch_unpack after do_unpack before do_pre_patch
do_pre_patch () {
@@ -44,5 +43,5 @@ do_compile () {
do_install () {
install -d ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/net
- install -m 0644 ixp425_eth.o ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/net/
+ install -m 0644 ixp425_eth.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/net/
}
diff --git a/ixp4xx/ixp4xx-csr/build-timing-annoyance.patch b/ixp4xx/ixp4xx-csr/build-timing-annoyance.patch
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/ixp4xx/ixp4xx-csr/build-timing-annoyance.patch
diff --git a/ixp4xx/ixp4xx-csr_1.4.oe b/ixp4xx/ixp4xx-csr_1.4.oe
index 4a9295e516..accb992520 100644
--- a/ixp4xx/ixp4xx-csr_1.4.oe
+++ b/ixp4xx/ixp4xx-csr_1.4.oe
@@ -4,7 +4,8 @@ LICENSE = "${PN}"
LICENSE_HOMEPAGE = "http://www.intel.com/design/network/swsup/ixp400AccessLibrary-1_4.htm"
SRC_URI = "http://www.intel.com/design/network/swsup/ixp400AccessLibrary-1_4.zip \
http://www.wnk.at/ixp400_accesslib_kernel26/data/patch_accesslib_kernel26_20040811.diff;patch=1 \
- file://badpaths.patch;patch=1"
+ file://badpaths.patch;patch=1 \
+ file://build-timing-annoyance.patch;patch=1"
S = "${WORKDIR}/ixp400_xscale_sw"
PR = "r1"
@@ -14,6 +15,7 @@ inherit module
#LINUX_MACH_CFLAGS := -D__LINUX_ARM_ARCH__=5 -mcpu=xscale -mtune=xscale
CFLAGS = "-fno-common -D__KERNEL__ -DMODULE -D__linux -DCPU=33 -DXSCALE=33 \
+ -D__LINUX_ARM_ARCH__=5 \
-I${S}/src/linux -I${S}/src/include \
${BUILD_OPTIMIZATION} \
-I${STAGING_KERNEL_DIR}/include"
@@ -34,7 +36,7 @@ do_compile () {
do_stage () {
install -d ${STAGING_INCDIR}/linux/ixp4xx-csr
install -m 0644 src/include/*.h ${STAGING_INCDIR}/linux/ixp4xx-csr/
- cp -r --dereference src/linux/* ${STAGING_INCDIR}/linux/ixp4xx-csr/
+ cp -rf --dereference src/linux/* ${STAGING_INCDIR}/linux/ixp4xx-csr/
}
do_install () {
diff --git a/linux/openslug-kernel-2.6.9/defconfig b/linux/openslug-kernel-2.6.9/defconfig
index e69de29bb2..8bbf20ebfb 100644
--- a/linux/openslug-kernel-2.6.9/defconfig
+++ b/linux/openslug-kernel-2.6.9/defconfig
@@ -0,0 +1,1098 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE_PB is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+# CONFIG_ARCH_AVILA is not set
+# CONFIG_ARCH_ADI_COYOTE is not set
+#CONFIG_ARCH_IXDP425=y
+#CONFIG_ARCH_IXCDP1100=y
+# CONFIG_ARCH_PRPMC1100 is not set
+#CONFIG_ARCH_IXDP4XX=y
+CONFIG_ARCH_NSLU2=y
+
+#
+# IXP4xx Options
+#
+CONFIG_IXP4XX_INDIRECT_PCI=y
+CONFIG_DMABOUNCE=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_MINICACHE=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_XSCALE_PMU=y
+
+#
+# General setup
+#
+CONFIG_PCI=y
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_NAMES is not set
+
+#
+# PCMCIA/CardBus support
+#
+# CONFIG_PCMCIA is not set
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PM=y
+# CONFIG_PREEMPT is not set
+CONFIG_APM=y
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="root=/dev/ram0 initrd=0x01000000,10M mem=32M@0x00000000 console=ttyS0,115200n8"
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PCI is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_CARMEL is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=10240
+CONFIG_BLK_DEV_INITRD=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_NETLINK_DEV=m
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_NAT=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_TOS=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_CSZ=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_DELAY is not set
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=m
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISA is not set
+CONFIG_I2C_IXP4XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Hardware Sensors Chip support
+#
+CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+CONFIG_SENSORS_EEPROM=y
+CONFIG_SENSORS_X1205=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# Misc devices
+#
+
+#
+# USB support
+#
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811HS is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Human Interface Devices (HID)
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network adaptors
+#
+# CONFIG_USB_CATC is not set
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+
+#
+# USB Host-to-Host Cables
+#
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_GENESYS=y
+CONFIG_USB_NET1080=y
+CONFIG_USB_PL2301=y
+
+#
+# Intelligent USB Devices/Gadgets
+#
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_ZAURUS=y
+CONFIG_USB_CDCETHER=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_AX8817X=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Kernel hacking
+#
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/meta/openslug-image.oe b/meta/openslug-image.oe
index 36cadd84a4..a11eca136a 100644
--- a/meta/openslug-image.oe
+++ b/meta/openslug-image.oe
@@ -1,10 +1,26 @@
+PR = "r1"
+
IMAGE_BASENAME = "openslug"
IMAGE_LINGUAS = ""
USE_DEVFS = "1"
-IPKG_INSTALL = "task-bootstrap"
+OPENSLUG_HIDDEN_PACKAGES = "ipkg-native ipkg-utils-native fakeroot-native patcher-native virtual/armeb-linux-uclibc-gcc \
+ virtual/libc makedevs-native mtd-native slugimage-native nslu2-linksys-firmware nslu2-switchbox-firmware "
+
+DEPENDS = "base-files base-passwd-3.5.7 \
+ busybox dropbear hotplug initscripts modutils netbase \
+ sysvinit tinylogin lrzsz portmap \
+ modutils-initscripts ixp4xx-csr ixp425-eth \
+ ipkg-collateral ipkg ipkg-link \
+ ${OPENSLUG_EXTRA_DEPENDS}"
-DEPENDS = "task-bootstrap"
+IPKG_INSTALL = "base-files base-passwd \
+ busybox dropbear hotplug initscripts netbase \
+ modutils-depmod modutils-modinfo modutils-initscripts \
+ update-modules sysvinit tinylogin lrzsz portmap \
+ ixp4xx-csr ixp425-eth \
+ ipkg-collateral ipkg ipkg-link \
+ ${OPENSLUG_EXTRA_INSTALL}"
inherit image_ipk
diff --git a/nslu2-binary-only/nslu2-switchbox-firmware.oe b/nslu2-binary-only/nslu2-switchbox-firmware.oe
index 298189ecdb..39f3a0a4b1 100644
--- a/nslu2-binary-only/nslu2-switchbox-firmware.oe
+++ b/nslu2-binary-only/nslu2-switchbox-firmware.oe
@@ -2,9 +2,9 @@ SECTION = "base"
DEPENDS = ""
PACKAGES = ""
INHIBIT_DEFAULT_DEPS = "1"
-PR = "r2"
+PR = "r3"
-SRC_URI = "http://www.nslu2-linux.org/downloads/switchbox-3.2.tar.gz"
+SRC_URI = "http://www.nslu2-linux.org/downloads/switchbox-3.3.tar.gz"
S = "${WORKDIR}"
do_compile () {
diff --git a/nslu2-binary-only/unslung-ramdisk-2.3r25/README b/nslu2-binary-only/unslung-ramdisk-2.3r25/README
index e69de29bb2..9ed4211cf4 100644
--- a/nslu2-binary-only/unslung-ramdisk-2.3r25/README
+++ b/nslu2-binary-only/unslung-ramdisk-2.3r25/README
@@ -0,0 +1,249 @@
+UNSLUNG-2.x family release README
+
+Unslung is a replacement firmware image for the NSLU2 which is designed
+to allow you to mount the root filesystem from an external disk,
+without changing the standard product functionality.
+
+This is intended to be a way of distributing and loading new packages
+for the NSLU2, with minimal changes to the standard user interface and
+firmware.
+
+The changes in the UNSLUNG 2.x firmware from the standard Linksys
+2.3R25 can be found at:
+
+ http://www.nslu2-linux.org/wiki/Unslung/UnslungStandard
+
+For more information about the Unslung firmware, including details on
+how to build it from source code yourself, look at:
+
+ http://www.nslu2-linux.org/wiki/Unslung
+
+PRE-INSTALLATION CONSIDERATIONS
+
+1) It is strongly recommended that you test telnet Redboot access first.
+ See http://www.nslu2-linux.org/wiki/HowTo/TelnetIntoRedBoot
+2) It is strongly recommended you select a 'virgin' disk for unslinging;
+ that is a disk that empty; or that can be reformatted. It is
+ absolutely required that the disk is (or has previously been)
+ formatted by the NSLU2. It is possible to upgrade from Unslung 1.x
+ to Unslung 2.x without reformatting your disk. The unsling script
+ will not touch anything in /unslung or /opt, so make sure all your
+ file modifications are in those directories, as you were warned
+ in the README for Unslung 1.x :-)
+
+INSTALLATION DETAILS
+
+1) Make sure your NSLU2 is working properly.
+2) Flash unslung-standard-2.x.img as you normally would flash new firmware.
+3) Verify your NSLU2 is working normally at this point.
+4) Make sure that you do *not* have a disk plugged in when you reboot to
+ perform the next part of the installation.
+
+'UNSLINGING' DETAILS
+
+0) Note that this only has to be done when you update the firmware.
+ Also note that you should not have a disk plugged in at this stage.
+1) Enable telnet by going to http://192.168.1.77/Management/telnet.cgi,
+ and press the enable button.
+2) Telnet into the NSLU2 using the username root and password uNSLUng.
+3) Identify which drive you wish you "unsling", and plug it in.
+ Wait a minute or two while the disk is mounted. If the disk has not
+ been previously formatted on the NSLU2, then now is the time to do
+ that. Make sure that the drive is recognised in the web interface.
+4) In the telnet session, run "/sbin/unsling" and watch the ramdisk files
+ be copied to your disk. The files from the ramdisk will be copied to
+ the "conf" partition, not the "data" partition.
+5) Note that unsling will not change the password on your disk, so if
+ you had previously changed the password on a disk, then your password
+ will not be changed.
+6) Reboot.
+
+Congratulations, you're now Unslung! You should have an extra 10M of free
+memory to use for other things.
+
+Make sure you add an entry to the "The Unslung 2.x" table in the Yahoo
+group. Just use the next free integer for your Unslung number.
+
+If you make no further changes, your NSLU2 will continue to operate
+normally. But to customize things, you'll be downloading packages and
+adding stuff to the /unslung directory on the new hard drive root
+using diversion scripts.
+
+POST-INSTALLATION DETAILS
+
+Diversion scripts go into /unslung. You can divert as many or as few
+scripts as you like. Simply add the name of the standard rc script
+into /unslung and it will be run.
+
+For example, I have a script /unslung/rc.local:
+
+#! /bin/sh
+/opt/bin/do_foo
+return 1
+
+That will run at the beginning of the normal /etc/rc.d/rc.local, and then
+the rest of the factory rc.local will be executed. If I do NOT want to run
+the factory rc.local, my script would be
+
+#!/bin/sh
+/opt/bin/do_foo
+return 0
+
+That is, if the diversion script returns with something other than 0, it will
+run the rest of the factory script.
+
+Note that any variable definitions or function declarations are allowed to
+happen before the diversion script is called. This allows you to use the
+variables and functions defined by the factory script.
+
+PACKAGE INSTALLATION
+
+1) Run "ipkg update" on the NSLU2.
+2) Run "ipkg list" to see the available packages.
+3) Run "ipkg install <package-name>" to install them.
+4) Note that if you upgrade an existing 1.11-beta disk, all your
+ downloaded packages will still be on your hard disk and should work as
+ before, but the ipkg system will probably have forgotten what you have
+ downloaded. You can re-install any you need to by typing
+ "ipk install -force-overwrite <package>".
+
+ADDITIONAL INFORMATION:
+
+1) If you wish to see the contents of the ramdisk, temporarily make a
+ directory called /initrd in your new hard drive /, then the ramdisk
+ will not be dismounted. You will not see a RAM benefit if you do this,
+ so use with caution. After you're done looking at the contents of the
+ ramdisk, unmount it and remove the initrd directory for RAM savings on
+ the next reboot.
+
+2) The linuxrc is written in such a way that if a known good unslung disk
+ is NOT attached, it will revert to failsafe booting from ramdisk.
+
+3) There is a version check mechanism which tags your unslung hard disk
+ at a certain firmware version (including the unslung version) and
+ will not boot from it if the versions do not match. When you flash a
+ new version of unslung, then you must re-run unsling to update the
+ root disk (and that's when you check your diversion scripts to make
+ sure they are still compatible with the new firmware version).
+
+4) The unsling script will never touch any files under /unslung or /opt,
+ so please store all your additional files there. However, any existing
+ files that you modify in any other of the standard directories will
+ be overwritten when you next update the firmware and unsling the disk.
+ If you need to modify a file in /etc for example, then write a
+ diversion script which does it on each boot (perhaps by symlinking
+ it to a file in /opt/etc which will not be touched by unsling).
+
+5) The diversion of startup scripts is done at the lowest granularity,
+ so you can, for instance, just divert the rc.xinetd script if you
+ want, and leave all the others unchanged.
+
+6) The diversion mechanism allows you to add to, or replace, the Linksys
+ script functionality.
+
+7) The /sbin/unsling script can take a new version of the Linksys
+ ramdisk, and update your unslung hard disk root filesystem from
+ that. This makes sure that unslung can take advantage of any new
+ Linksys features. As noted in item #4, if you have modified any
+ of the files from the Linksys ramdisk, then they will be overwritten.
+ Keep your modifications in /unslung and /opt and they will be safe.
+
+8) Note that telnet is not enabled by default - there is an openssh
+ package available to replace telnet access with secure shell
+ access. The rationale behind not enabling it by default is to
+ ensure that an unslung NSLU2 without a hard disk attached has the
+ same network footprint as the standard firmware.
+
+9) This simple diversion script will enable telnet on boot
+
+ # /unslung/rc.xinetd
+ #! /bin/sh
+ echo "telnet stream tcp nowait root /usr/sbin/telnetd" > /etc/inetd.conf
+ # Additional lines must append (using >>), ie:
+ # echo "ftp stream tcp nowait root /usr/sbin/ftpd -a=passwd" >> /etc/inetd.conf
+ return 1
+
+10) Note that the PATH is set so that downloadable packages do not
+ override the factory executables. This is so that a package
+ can't break the standard functionality. You can use a diversion
+ script or a .profile in the /root directory to change the PATH
+ if you would prefer to take the chance and get a different
+ behaviour.
+
+11) The Unslung firmware will automatically execute any scripts
+ which are in /opt/etc/init.d - and this is where any packages
+ put their startup scripts so that they execute on each boot.
+
+CHANGELOG:
+
+1.11:
+
+First public release
+
+1.12:
+
+Added a symlink to slingbox for gzip. Added flashfs (as simple utility for preserving
+user files across hard disk formats during beta testing).
+
+1.13:
+
+Added LD_LIBRARY_PATH to /etc/profile (only works for telnet and ssh
+access, not for serial or diversion scripts).
+
+1.14:
+
+Added Unslung Doc link to the User Guide page.
+
+2.3:
+
+Moved development to OpenEmbedded.
+
+2.4:
+
+Updated to the latest ipk binary instead of the simple script.
+
+2.5:
+
+Added the real wget (instead of using the busybox version). This is
+so we can support .netrc files for commercial packages.
+
+2.6:
+
+Fixed the unsling script so it removes conflicting files on an upgrade.
+
+2.7:
+
+Began development of the -able variant.
+
+2.8:
+
+Added the patch for genesys enclosures.
+
+2.9:
+
+Reorganised the various variants into a more consistent scheme.
+
+2.10:
+
+Added the ext3flash-on-disk1 functionality.
+
+2.11:
+
+Added the README to /opt/doc.
+
+2.12:
+
+First public release of 2.x firmware.
+
+3.1:
+
+Added jffs2 functionality.
+
+3.2:
+
+Incorporated switchbox functionality.
+
+3.3:
+
+Added ramdisks for /dev and /var to reduce internal flash writes.
+
diff --git a/nslu2-binary-only/unslung-ramdisk-2.3r25/linuxrc b/nslu2-binary-only/unslung-ramdisk-2.3r25/linuxrc
new file mode 100644
index 0000000000..7e7e477e04
--- /dev/null
+++ b/nslu2-binary-only/unslung-ramdisk-2.3r25/linuxrc
@@ -0,0 +1,46 @@
+#!/bin/sh
+
+/bin/echo "Firmware Version: `/bin/cat /.unslung`"
+
+mounted=
+
+/bin/mount -t proc proc /proc
+/bin/echo "0x0100" > /proc/sys/kernel/real-root-dev
+
+/bin/sleep 10
+
+if [ -z "$mounted" ] && /bin/mount -rt ext3 /dev/sda2 /mnt/tmpmnt ; then
+
+ if [ -x /mnt/tmpmnt/bin/init ] &&
+ [ -d /mnt/tmpmnt/unslung ] && [ -r /mnt/tmpmnt/.unslung ] &&
+ [ "`/bin/cat /.unslung`" = "`/bin/cat /mnt/tmpmnt/.unslung`" ] ; then
+ /bin/echo "Root filesystem will be mounted from /dev/sda2 ..."
+ mounted=/mnt/tmpmnt
+ /bin/echo "0x0802" > /proc/sys/kernel/real-root-dev
+ [ -r $mounted/unslung/rc.linuxrc ] && . $mounted/unslung/rc.linuxrc
+ fi
+
+ /bin/umount /mnt/tmpmnt
+fi
+
+if [ -z "$mounted" ] && /bin/mount -rt ext3 /dev/sdb2 /mnt/tmpmnt ; then
+
+ if [ -x /mnt/tmpmnt/bin/init ] &&
+ [ -d /mnt/tmpmnt/unslung ] && [ -r /mnt/tmpmnt/.unslung ] &&
+ [ "`/bin/cat /.unslung`" = "`/bin/cat /mnt/tmpmnt/.unslung`" ] ; then
+ /bin/echo "Root filesystem will be mounted from /dev/sdb2 ..."
+ mounted=/mnt/tmpmnt
+ /bin/echo "0x0812" > /proc/sys/kernel/real-root-dev
+ [ -r $mounted/unslung/rc.linuxrc ] && . $mounted/unslung/rc.linuxrc
+ fi
+
+ /bin/umount /mnt/tmpmnt
+fi
+
+if [ -z "$mounted" ] ; then
+ /bin/echo "Root filesystem will be mounted from /dev/ram0 ..."
+fi
+
+/bin/umount /proc
+
+exit 0
diff --git a/nslu2-binary-only/unslung-ramdisk-2.3r25/unslung.patch b/nslu2-binary-only/unslung-ramdisk-2.3r25/unslung.patch
index e69de29bb2..2dedb1ac46 100644
--- a/nslu2-binary-only/unslung-ramdisk-2.3r25/unslung.patch
+++ b/nslu2-binary-only/unslung-ramdisk-2.3r25/unslung.patch
@@ -0,0 +1,278 @@
+diff -BurN /dev/null/nslu/.unslung /mnt/nslu/.unslung
+--- /dev/null/nslu/.unslung 1970-01-01 09:30:00.000000000 +0930
++++ /mnt/nslu/.unslung 2004-08-30 21:46:35.000000000 +0930
+@@ -0,0 +1 @@
++V2.3R25-uNSLUng-X.Y
+\ No newline at end of file
+diff -BurN /dev/null/nslu/etc/passwd /mnt/nslu/etc/passwd
+--- /dev/null/nslu/etc/passwd 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/passwd 2004-08-30 09:02:51.000000000 -0400
+@@ -1,4 +1,4 @@
+-root:WeeOvKUvbQ6nI:0:0:root:/root:/bin/sh
++root:t1PLUeOinN/eI:0:0:root:/root:/bin/sh
+ bin:x:1:1:bin:/bin:
+ lp:x:4:7:lp:/share/spool:
+ mail:x:8:12:mail:/var/spool/mail:
+diff -BurN /dev/null/nslu/etc/profile /mnt/nslu/etc/profile
+--- /dev/null/nslu/etc/profile 1969-12-31 19:00:00.000000000 -0500
++++ /mnt/nslu/etc/profile 2004-08-30 09:02:51.000000000 -0400
+@@ -0,0 +1,2 @@
++export PATH=$PATH:/opt/bin:/opt/sbin:/opt/usr/bin:/opt/usr/sbin
++export LD_LIBRARY_PATH=/opt/lib
+diff -BurN /dev/null/nslu/etc/rc /mnt/nslu/etc/rc
+--- /dev/null/nslu/etc/rc 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc 2004-09-01 21:47:47.000000000 -0400
+@@ -1,4 +1,7 @@
+ ## Simple beta script to verify csr
++
++if ( [ -f /unslung/rc ] && . /unslung/rc ) ; then return 0 ; fi
++
+ /usr/bin/Set_Led r_blinking &
+ mount -t proc proc /proc
+ mount -o remount,rw /dev/root /
+diff -BurN /dev/null/nslu/etc/rc.d/rc.1 /mnt/nslu/etc/rc.d/rc.1
+--- /dev/null/nslu/etc/rc.d/rc.1 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.1 2004-09-01 21:56:17.000000000 -0400
+@@ -1,5 +1,7 @@
+ #!/bin/sh
+
++if ( [ -f /unslung/rc.1 ] && . /unslung/rc.1 ) ; then return 0 ; fi
++
+ #/sbin/ifconfig ixp0 hw ether 00:C0:02:01:01:04
+ /bin/echo "Starting Set CGI_ds.conf:"; /etc/rc.d/rc.bootbin; check_status
+
+@@ -17,6 +19,10 @@
+ /bin/echo "Starting Crond :"; . /etc/rc.d/rc.crond
+ /bin/echo "Starting Rest Task :"; . /etc/rc.d/rc.local
+
++if [ -f /.unslung ] ; then
++ /bin/echo "Starting UNSLUNG Packages:"; ( . /etc/rc.d/rc.unslung )
++fi
++
+ /usr/bin/Set_Led ready
+ /usr/bin/Set_Led beep1
+ /bin/echo "Checking disk status :"; /usr/sbin/CheckDiskFull 2 >/dev/null
+diff -BurN /dev/null/nslu/etc/rc.d/rc.crond /mnt/nslu/etc/rc.d/rc.crond
+--- /dev/null/nslu/etc/rc.d/rc.crond 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.crond 2004-09-01 21:56:37.000000000 -0400
+@@ -1,5 +1,7 @@
+ #!/bin/sh
+
++if ( [ -r /unslung/rc.crond ] && . /unslung/rc.crond ) ; then return 0 ; fi
++
+ if [ -n "`pidof crond`" ] ;then
+ /bin/killall crond 2>/dev/null
+ fi
+diff -BurN /dev/null/nslu/etc/rc.d/rc.halt /mnt/nslu/etc/rc.d/rc.halt
+--- /dev/null/nslu/etc/rc.d/rc.halt 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.halt 2004-09-01 21:57:01.000000000 -0400
+@@ -1,4 +1,7 @@
+ #!/bin/sh
++
++if ( [ -r /unslung/rc.halt ] && . /unslung/rc.halt ) ; then return 0 ; fi
++
+ /bin/killall -2 upnpd &>/dev/null
+ /bin/killall nmbd &>/dev/null
+ /bin/killall smbd &>/dev/null
+diff -BurN /dev/null/nslu/etc/rc.d/rc.local /mnt/nslu/etc/rc.d/rc.local
+--- /dev/null/nslu/etc/rc.d/rc.local 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.local 2004-09-01 21:57:17.000000000 -0400
+@@ -1,5 +1,9 @@
+ #!/bin/sh
++
+ HOSTNAME=`hostname`
++
++if ( [ -r /unslung/rc.local ] && . /unslung/rc.local ) ; then return 0 ; fi
++
+ /usr/sbin/CheckResetButton 2>/dev/null
+ /usr/sbin/CheckPowerButton 2>/dev/null
+ /usr/sbin/do_umount 2>/dev/null
+diff -BurN /dev/null/nslu/etc/rc.d/rc.modules /mnt/nslu/etc/rc.d/rc.modules
+--- /dev/null/nslu/etc/rc.d/rc.modules 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.modules 2004-09-01 21:57:34.000000000 -0400
+@@ -1,4 +1,7 @@
+ #!/bin/sh
++
++if ( [ -f /unslung/rc.modules ] && . /unslung/rc.modules ) ; then return 0 ; fi
++
+ insmod pbuttons &>/dev/null
+ insmod rbuttons &>/dev/null
+ insmod x1226-rtc &>/dev/null
+diff -BurN /dev/null/nslu/etc/rc.d/rc.network /mnt/nslu/etc/rc.d/rc.network
+--- /dev/null/nslu/etc/rc.d/rc.network 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.network 2004-09-01 21:57:46.000000000 -0400
+@@ -1,3 +1,6 @@
+ #!/bin/sh
++
++if ( [ -f /unslung/rc.network ] && . /unslung/rc.network ) ; then return 0 ; fi
++
+ /sbin/ifup; #check_status
+ /bin/echo "call rc.network!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+diff -BurN /dev/null/nslu/etc/rc.d/rc.quickset /mnt/nslu/etc/rc.d/rc.quickset
+--- /dev/null/nslu/etc/rc.d/rc.quickset 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.quickset 2004-09-01 21:57:57.000000000 -0400
+@@ -1,3 +1,6 @@
+ #!/bin/sh
++
++if ( [ -f /unslung/rc.quickset ] && . /unslung/rc.quickset ) ; then return 0 ; fi
++
+ /usr/sbin/QuickSet; check_status
+ /usr/sbin/USB_Detect; check_status
+diff -BurN /dev/null/nslu/etc/rc.d/rc.quota /mnt/nslu/etc/rc.d/rc.quota
+--- /dev/null/nslu/etc/rc.d/rc.quota 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.quota 2004-09-01 21:58:08.000000000 -0400
+@@ -1,5 +1,7 @@
+ #!/bin/sh
+
++if ( [ -f /unslung/rc.quota ] && . /unslung/rc.quota ) ; then return 0 ; fi
++
+ # Check and turn on disk quota.
+ if [ -x "/usr/bin/quotacheck" ]
+ then
+diff -BurN /dev/null/nslu/etc/rc.d/rc.reboot /mnt/nslu/etc/rc.d/rc.reboot
+--- /dev/null/nslu/etc/rc.d/rc.reboot 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.reboot 2004-09-01 21:58:19.000000000 -0400
+@@ -1,4 +1,7 @@
+ #!/bin/sh
++
++if ( [ -r /unslung/rc.reboot ] && . /unslung/rc.reboot ) ; then return 0 ; fi
++
+ /bin/killall -2 upnpd 2>/dev/null
+ sleep 4
+ /sbin/ifdown ixp0
+diff -BurN /dev/null/nslu/etc/rc.d/rc.reset_usrgrpshare /mnt/nslu/etc/rc.d/rc.reset_usrgrpshare
+--- /dev/null/nslu/etc/rc.d/rc.reset_usrgrpshare 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.reset_usrgrpshare 2004-09-01 21:58:36.000000000 -0400
+@@ -1,2 +1,5 @@
+ #!/bin/sh
++
++if ( [ -f /unslung/rc.reset_usrgrpshare ] && . /unslung/rc.reset_usrgrpshare ) ; then return 0 ; fi
++
+ /usr/sbin/reset_ugs;
+diff -BurN /dev/null/nslu/etc/rc.d/rc.rstimezone /mnt/nslu/etc/rc.d/rc.rstimezone
+--- /dev/null/nslu/etc/rc.d/rc.rstimezone 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.rstimezone 2004-09-01 21:58:47.000000000 -0400
+@@ -1,4 +1,7 @@
+ #!/bin/sh
++
++if ( [ -f /unslung/rc.rstimezone ] && . /unslung/rc.rstimezone ) ; then return 0 ; fi
++
+ #TIME=`/usr/sbin/hwclock`
+ /usr/sbin/Set_TimeZone >/dev/null
+ #/bin/date -s "$TIME"
+diff -BurN /dev/null/nslu/etc/rc.d/rc.samba /mnt/nslu/etc/rc.d/rc.samba
+--- /dev/null/nslu/etc/rc.d/rc.samba 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.samba 2004-09-01 21:58:57.000000000 -0400
+@@ -1,4 +1,7 @@
+ #!/bin/sh
++
++if ( [ -f /unslung/rc.samba ] && . /unslung/rc.samba ) ; then return 0 ; fi
++
+ if [ -n "`pidof smbd`" ] ; then
+ killall smbd 2>/dev/null
+ fi
+diff -BurN /dev/null/nslu/etc/rc.d/rc.sysinit /mnt/nslu/etc/rc.d/rc.sysinit
+--- /dev/null/nslu/etc/rc.d/rc.sysinit 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.sysinit 2004-09-01 21:59:04.000000000 -0400
+@@ -1,7 +1,16 @@
+ #!/bin/sh
++
+ export PATH=/bin:/sbin:/usr/bin:/usr/sbin
++
++if [ -f /.unslung ] ; then
++ export PATH=${PATH}:/opt/bin:/opt/sbin:/opt/usr/bin:/opt/usr/sbin
++fi
++
+ . /etc/rc.d/rc.functions
+ . /etc/sysconfig/network
++
++if ( [ -f /unslung/rc.sysinit ] && . /unslung/rc.sysinit ) ; then return 0 ; fi
++
+ mkdir -p /var/lock/samba >/dev/null
+ /bin/echo "Creating ramfs for /var/lock/samba:"; mount -t ramfs none /var/lock/samba -o maxsize=64
+ /bin/echo "Limit the space of log folder:"; mount -t ramfs none /var/log -o maxsize=128
+diff -BurN /dev/null/nslu/etc/rc.d/rc.thttpd /mnt/nslu/etc/rc.d/rc.thttpd
+--- /dev/null/nslu/etc/rc.d/rc.thttpd 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.thttpd 2004-09-01 21:59:13.000000000 -0400
+@@ -1,4 +1,7 @@
+ #!/bin/sh
++
++if ( [ -f /unslung/rc.thttpd ] && . /unslung/rc.thttpd ) ; then return 0 ; fi
++
+ if [ -n "`pidof thttpd`" ] ;then
+ /bin/killall thttpd 2>/dev/null
+ fi
+diff -BurN /dev/null/nslu/etc/rc.d/rc.xinetd /mnt/nslu/etc/rc.d/rc.xinetd
+--- /dev/null/nslu/etc/rc.d/rc.xinetd 2004-07-27 23:37:55.000000000 -0400
++++ /mnt/nslu/etc/rc.d/rc.xinetd 2004-09-01 21:59:34.000000000 -0400
+@@ -1,4 +1,7 @@
+ #!/bin/sh
++
++if ( [ -f /unslung/rc.xinetd ] && . /unslung/rc.xinetd ) ; then return 0 ; fi
++
+ if [ -n "`pidof inetd`" ] ;then
+ killall inetd 2>/dev/null
+ # killall -9 inetd &>/dev/null
+diff -BurN /dev/null/nslu/usr/local/passwd /mnt/nslu/usr/local/passwd
+--- /dev/null/nslu/usr/local/passwd 2004-07-27 23:37:56.000000000 -0400
++++ /mnt/nslu/usr/local/passwd 2004-08-30 09:02:51.000000000 -0400
+@@ -1,4 +1,4 @@
+-root:WeeOvKUvbQ6nI:0:0:root:/root:/bin/sh
++root:t1PLUeOinN/eI:0:0:root:/root:/bin/sh
+ bin:x:1:1:bin:/bin:
+ lp:x:4:7:lp:/share/spool:
+ mail:x:8:12:mail:/var/spool/mail:
+--- /dev/null/nslu/etc/rc.d/rc.sysinit 2004-11-09 21:45:46.000000000 +1030
++++ /mnt/nslu/etc/rc.d/rc.sysinit 2004-11-09 21:41:47.000000000 +1030
+@@ -12,8 +12,18 @@
+ if ( [ -f /unslung/rc.sysinit ] && . /unslung/rc.sysinit ) ; then return 0 ; fi
+
+ mkdir -p /var/lock/samba >/dev/null
+-/bin/echo "Creating ramfs for /var/lock/samba:"; mount -t ramfs none /var/lock/samba -o maxsize=64
+-/bin/echo "Limit the space of log folder:"; mount -t ramfs none /var/log -o maxsize=128
++
++/bin/echo "Creating ramfs for /dev:"
++/bin/mount -t ramfs none /mnt/tmpmnt
++/bin/cp -r /dev/* /mnt/tmpmnt/
++/bin/mount -o bind /mnt/tmpmnt /dev
++/bin/umount /mnt/tmpmnt
++/bin/echo "Creating ramfs for /var:"
++/bin/mount -t ramfs none /mnt/tmpmnt
++/bin/cp -r /var/* /mnt/tmpmnt/
++/bin/mount -o bind /mnt/tmpmnt /var
++/bin/umount /mnt/tmpmnt
++
+ mkdir -p /var/log/samba >/dev/null
+ touch /var/log/server.log >/dev/null
+ chmod 755 /var/log/samba >/dev/null
+--- /dev/null/nslu/etc/rc.d/rc.1.orig 2004-11-09 21:45:52.000000000 +1030
++++ /mnt/nslu/etc/rc.d/rc.1 2004-11-09 21:44:27.000000000 +1030
+@@ -5,6 +5,14 @@
+ #/sbin/ifconfig ixp0 hw ether 00:C0:02:01:01:04
+ /bin/echo "Starting Set CGI_ds.conf:"; /etc/rc.d/rc.bootbin; check_status
+
++if ( [ -f /share/hdd/conf/.ext3flash ] ) ; then
++ /bin/echo "Remounting /dev/sda1 as ext3flash:"
++ /bin/mount -o remount,rw,noatime /dev/sda1
++ /bin/echo "Remounting /dev/sda2 as ext3flash:"
++ /bin/mount -o remount,rw,noatime /dev/sda2
++ /bin/echo "Removing swap from ext3flash:"
++ /sbin/swapoff /dev/sda3
++fi
+
+ /bin/echo "Restore time and timezone:"; /etc/rc.d/rc.rstimezone; check_status
+ /bin/echo "Restore usrgrpshares:"; /etc/rc.d/rc.reset_usrgrpshare; check_status
+--- /dev/null/nslu/etc/rc.d/rc.quota 2004-11-11 00:05:21.000000000 +1030
++++ /mnt/nslu/etc/rc.d/rc.quota 2004-11-11 00:04:52.000000000 +1030
+@@ -10,6 +10,11 @@
+ echo "Done."
+ fi
+
++if ( [ -f /share/hdd/conf/.ext3flash ] ) ; then
++ /bin/echo "Remounting /dev/sda1 as ext3flash:"
++ /bin/mount -o remount,rw,noatime /dev/sda1
++fi
++
+ if [ -x "/usr/bin/quotaon" ]
+ then
+ echo "Turning on quota."
diff --git a/nslu2-binary-only/unslung-standard-ramdisk_2.3r25.oe b/nslu2-binary-only/unslung-standard-ramdisk_2.3r25.oe
index b883a0d770..b072d5b83b 100644
--- a/nslu2-binary-only/unslung-standard-ramdisk_2.3r25.oe
+++ b/nslu2-binary-only/unslung-standard-ramdisk_2.3r25.oe
@@ -1,8 +1,8 @@
SECTION = "base"
-PR = "r20"
+PR = "r21"
-UNSLUNG_VERSION = "3.2-alpha"
+UNSLUNG_VERSION = "3.3-alpha"
UNSLUNG_VARIANT ?= "standard"
DEPENDS = "nslu2-linksys-libs"
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-05 09:50:25 +0000