diff options
Diffstat (limited to 'irda-utils/irda-utils/m4.patch')
| -rw-r--r-- | irda-utils/irda-utils/m4.patch | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/irda-utils/irda-utils/m4.patch b/irda-utils/irda-utils/m4.patch index e69de29bb2..9c077bb24b 100644 --- a/irda-utils/irda-utils/m4.patch +++ b/irda-utils/irda-utils/m4.patch @@ -0,0 +1,204 @@ + +# +# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher +# + +--- /dev/null ++++ irda-utils-0.9.15/irdadump/m4/glib.m4 +@@ -0,0 +1,196 @@ ++# Configure paths for GLIB ++# Owen Taylor 97-11-3 ++ ++dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) ++dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or ++dnl gthread is specified in MODULES, pass to glib-config ++dnl ++AC_DEFUN(AM_PATH_GLIB, ++[dnl ++dnl Get the cflags and libraries from the glib-config script ++dnl ++AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)], ++ glib_config_prefix="$withval", glib_config_prefix="") ++AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)], ++ glib_config_exec_prefix="$withval", glib_config_exec_prefix="") ++AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program], ++ , enable_glibtest=yes) ++ ++ if test x$glib_config_exec_prefix != x ; then ++ glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix" ++ if test x${GLIB_CONFIG+set} != xset ; then ++ GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config ++ fi ++ fi ++ if test x$glib_config_prefix != x ; then ++ glib_config_args="$glib_config_args --prefix=$glib_config_prefix" ++ if test x${GLIB_CONFIG+set} != xset ; then ++ GLIB_CONFIG=$glib_config_prefix/bin/glib-config ++ fi ++ fi ++ ++ for module in . $4 ++ do ++ case "$module" in ++ gmodule) ++ glib_config_args="$glib_config_args gmodule" ++ ;; ++ gthread) ++ glib_config_args="$glib_config_args gthread" ++ ;; ++ esac ++ done ++ ++ AC_PATH_PROG(GLIB_CONFIG, glib-config, no) ++ min_glib_version=ifelse([$1], ,0.99.7,$1) ++ AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) ++ no_glib="" ++ if test "$GLIB_CONFIG" = "no" ; then ++ no_glib=yes ++ else ++ GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags` ++ GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs` ++ glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \ ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` ++ glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \ ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` ++ glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \ ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` ++ if test "x$enable_glibtest" = "xyes" ; then ++ ac_save_CFLAGS="$CFLAGS" ++ ac_save_LIBS="$LIBS" ++ CFLAGS="$CFLAGS $GLIB_CFLAGS" ++ LIBS="$GLIB_LIBS $LIBS" ++dnl ++dnl Now check if the installed GLIB is sufficiently new. (Also sanity ++dnl checks the results of glib-config to some extent ++dnl ++ rm -f conf.glibtest ++ AC_TRY_RUN([ ++#include <glib.h> ++#include <stdio.h> ++#include <stdlib.h> ++ ++int ++main () ++{ ++ int major, minor, micro; ++ char *tmp_version; ++ ++ system ("touch conf.glibtest"); ++ ++ /* HP/UX 9 (%@#!) writes to sscanf strings */ ++ tmp_version = g_strdup("$min_glib_version"); ++ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { ++ printf("%s, bad version string\n", "$min_glib_version"); ++ exit(1); ++ } ++ ++ if ((glib_major_version != $glib_config_major_version) || ++ (glib_minor_version != $glib_config_minor_version) || ++ (glib_micro_version != $glib_config_micro_version)) ++ { ++ printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", ++ $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, ++ glib_major_version, glib_minor_version, glib_micro_version); ++ printf ("*** was found! If glib-config was correct, then it is best\n"); ++ printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n"); ++ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); ++ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); ++ printf("*** required on your system.\n"); ++ printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n"); ++ printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n"); ++ printf("*** before re-running configure\n"); ++ } ++ else if ((glib_major_version != GLIB_MAJOR_VERSION) || ++ (glib_minor_version != GLIB_MINOR_VERSION) || ++ (glib_micro_version != GLIB_MICRO_VERSION)) ++ { ++ printf("*** GLIB header files (version %d.%d.%d) do not match\n", ++ GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); ++ printf("*** library (version %d.%d.%d)\n", ++ glib_major_version, glib_minor_version, glib_micro_version); ++ } ++ else ++ { ++ if ((glib_major_version > major) || ++ ((glib_major_version == major) && (glib_minor_version > minor)) || ++ ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) ++ { ++ return 0; ++ } ++ else ++ { ++ printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", ++ glib_major_version, glib_minor_version, glib_micro_version); ++ printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", ++ major, minor, micro); ++ printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); ++ printf("***\n"); ++ printf("*** If you have already installed a sufficiently new version, this error\n"); ++ printf("*** probably means that the wrong copy of the glib-config shell script is\n"); ++ printf("*** being found. The easiest way to fix this is to remove the old version\n"); ++ printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n"); ++ printf("*** correct copy of glib-config. (In this case, you will have to\n"); ++ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); ++ printf("*** so that the correct libraries are found at run-time))\n"); ++ } ++ } ++ return 1; ++} ++],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) ++ CFLAGS="$ac_save_CFLAGS" ++ LIBS="$ac_save_LIBS" ++ fi ++ fi ++ if test "x$no_glib" = x ; then ++ AC_MSG_RESULT(yes) ++ ifelse([$2], , :, [$2]) ++ else ++ AC_MSG_RESULT(no) ++ if test "$GLIB_CONFIG" = "no" ; then ++ echo "*** The glib-config script installed by GLIB could not be found" ++ echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in" ++ echo "*** your path, or set the GLIB_CONFIG environment variable to the" ++ echo "*** full path to glib-config." ++ else ++ if test -f conf.glibtest ; then ++ : ++ else ++ echo "*** Could not run GLIB test program, checking why..." ++ CFLAGS="$CFLAGS $GLIB_CFLAGS" ++ LIBS="$LIBS $GLIB_LIBS" ++ AC_TRY_LINK([ ++#include <glib.h> ++#include <stdio.h> ++], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], ++ [ echo "*** The test program compiled, but did not run. This usually means" ++ echo "*** that the run-time linker is not finding GLIB or finding the wrong" ++ echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" ++ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" ++ echo "*** to the installed location Also, make sure you have run ldconfig if that" ++ echo "*** is required on your system" ++ echo "***" ++ echo "*** If you have an old version installed, it is best to remove it, although" ++ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ++ echo "***" ++ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" ++ echo "*** came with the system with the command" ++ echo "***" ++ echo "*** rpm --erase --nodeps gtk gtk-devel" ], ++ [ echo "*** The test program failed to compile or link. See the file config.log for the" ++ echo "*** exact error that occured. This usually means GLIB was incorrectly installed" ++ echo "*** or that you have moved GLIB since it was installed. In the latter case, you" ++ echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ]) ++ CFLAGS="$ac_save_CFLAGS" ++ LIBS="$ac_save_LIBS" ++ fi ++ fi ++ GLIB_CFLAGS="" ++ GLIB_LIBS="" ++ ifelse([$3], , :, [$3]) ++ fi ++ AC_SUBST(GLIB_CFLAGS) ++ AC_SUBST(GLIB_LIBS) ++ rm -f conf.glibtest ++]) |