diff options
Diffstat (limited to 'packages/nonworking/apache/apache/apache-2.0.48/configure.patch')
| -rw-r--r-- | packages/nonworking/apache/apache/apache-2.0.48/configure.patch | 390 |
1 files changed, 0 insertions, 390 deletions
diff --git a/packages/nonworking/apache/apache/apache-2.0.48/configure.patch b/packages/nonworking/apache/apache/apache-2.0.48/configure.patch deleted file mode 100644 index 13217ed4b9..0000000000 --- a/packages/nonworking/apache/apache/apache-2.0.48/configure.patch +++ /dev/null @@ -1,390 +0,0 @@ - -# -# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher -# - ---- httpd-2.0.48/./configure.in~configure -+++ httpd-2.0.48/./configure.in -@@ -4,8 +4,9 @@ - dnl Use ./buildconf to produce a configure script - dnl - --AC_PREREQ(2.13) --AC_INIT(ABOUT_APACHE) -+AC_PREREQ(2.57) -+AC_INIT -+AC_CONFIG_SRCDIR([ABOUT_APACHE]) - - AC_CONFIG_HEADER(include/ap_config_auto.h) - AC_CONFIG_AUX_DIR(build) -@@ -55,7 +56,7 @@ - dnl shared library support for these packages doesn't currently - dnl work on some platforms - --AC_CANONICAL_SYSTEM -+AC_CANONICAL_TARGET([]) - - orig_prefix="$prefix" - -@@ -209,7 +210,7 @@ - APR_SETVAR(SINGLE_LISTEN_UNSERIALIZED_ACCEPT, [1]) - ;; - *-solaris2*) -- dnl This is a hack -- we should be using AC_TRY_RUN instead -+ dnl This is a hack -- we should be using AC_RUN_IFELSE([AC_LANG_SOURCE([[]])],[],[],[]) instead - ap_platform_runtime_link_flag="-R" - dnl solaris 8 and above don't have a thundering herd - dnl not sure about rev's before this one. -@@ -286,7 +287,7 @@ - dnl ## Check for typedefs, structures, and compiler characteristics. - - AC_C_CONST --if test "$ac_cv_prog_gcc" = "yes"; then -+if test "$ac_cv_c_compiler_gnu" = "yes"; then - APR_ADDTO(NOTEST_CPPFLAGS,-DAP_HAVE_DESIGNATED_INITIALIZER) - fi - -@@ -305,9 +306,8 @@ - - dnl ## Check for the tm_gmtoff field in struct tm to get the timezone diffs - AC_CACHE_CHECK([for tm_gmtoff in struct tm], ac_cv_struct_tm_gmtoff, --[AC_TRY_COMPILE([#include <sys/types.h> --#include <time.h>], [struct tm tm; tm.tm_gmtoff;], -- ac_cv_struct_tm_gmtoff=yes, ac_cv_struct_tm_gmtoff=no)]) -+[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/types.h> -+#include <time.h>]], [[struct tm tm; tm.tm_gmtoff;]])],[ac_cv_struct_tm_gmtoff=yes],[ac_cv_struct_tm_gmtoff=no])]) - if test "$ac_cv_struct_tm_gmtoff" = "yes"; then - AC_DEFINE(HAVE_GMTOFF) - fi ---- httpd-2.0.48/./srclib/apr/configure.in~configure -+++ httpd-2.0.48/./srclib/apr/configure.in -@@ -4,7 +4,8 @@ - dnl Process this file with autoconf to produce a configure script. - dnl Use ./buildconf to prepare build files and run autoconf for APR. - --AC_INIT(build/apr_common.m4) -+AC_INIT -+AC_CONFIG_SRCDIR([build/apr_common.m4]) - AC_CONFIG_HEADER(include/arch/unix/apr_private.h) - AC_CONFIG_AUX_DIR(build) - -@@ -29,7 +30,7 @@ - dnl - APR_CONFIG_NICE(config.nice) - --AC_CANONICAL_SYSTEM -+AC_CANONICAL_TARGET([]) - echo "Configuring APR library" - echo "Platform: $host" - -@@ -532,18 +533,14 @@ - dnl Linux is silly as it has pthread_rwlock_init defined - dnl but keeps the pthread_rwlock_t structure hidden unless - dnl special things are defined. -- AC_TRY_COMPILE([#include <sys/types.h> --#include <pthread.h>], -- [pthread_rwlock_t rwlock=PTHREAD_RWLOCK_INITIALIZER;], -- ac_cv_struct_pthread_rw=yes, ac_cv_struct_pthread_rw=no) -+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/types.h> -+#include <pthread.h>]], [[pthread_rwlock_t rwlock=PTHREAD_RWLOCK_INITIALIZER;]])],[ac_cv_struct_pthread_rw=yes],[ac_cv_struct_pthread_rw=no]) - if test "$ac_cv_struct_pthread_rw" = "no"; then -- AC_TRY_COMPILE([#define _XOPEN_SOURCE 500 -+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#define _XOPEN_SOURCE 500 - #define _BSD_SOURCE - #define _SVID_SOURCE - #include <sys/types.h> --#include <pthread.h>], -- [pthread_rwlock_t rwlock=PTHREAD_RWLOCK_INITIALIZER;], -- ac_cv_struct_pthread_rw=yes, ac_cv_struct_pthread_rw=no) -+#include <pthread.h>]], [[pthread_rwlock_t rwlock=PTHREAD_RWLOCK_INITIALIZER;]])],[ac_cv_struct_pthread_rw=yes],[ac_cv_struct_pthread_rw=no]) - if test "$ac_cv_struct_pthread_rw" = "yes"; then - APR_ADDTO(CPPFLAGS, [-D_XOPEN_SOURCE=500 -D_BSD_SOURCE]) - APR_ADDTO(CPPFLAGS, [-D_SVID_SOURCE]) -@@ -624,7 +621,7 @@ - if test "$ac_cv_func_mmap" = "yes" && - test "$ac_cv_file__dev_zero" = "yes"; then - AC_MSG_CHECKING(for mmap that can map /dev/zero) -- AC_TRY_RUN([ -+ AC_RUN_IFELSE([AC_LANG_SOURCE([[ - #include <sys/types.h> - #include <sys/stat.h> - #include <fcntl.h> -@@ -647,7 +644,7 @@ - return 3; - } - return 0; -- }], [], [ac_cv_file__dev_zero=no], [ac_cv_file__dev_zero=no]) -+ }]])],[],[ac_cv_file__dev_zero=no],[ac_cv_file__dev_zero=no]) - - AC_MSG_RESULT($ac_cv_file__dev_zero) - fi -@@ -852,7 +849,8 @@ - AC_SUBST(sendfile) - - AC_CHECK_FUNCS(sigaction, [ have_sigaction="1" ], [ have_sigaction="0" ]) --AC_DECL_SYS_SIGLIST -+AC_CHECK_DECLS([sys_siglist]) -+ - - AC_CHECK_FUNCS(fork, [ fork="1" ], [ fork="0" ]) - APR_CHECK_INET_ADDR -@@ -961,12 +959,11 @@ - # being included by itself. Check for <netinet/tcp.h> manually, - # including another header file first. - AC_CACHE_CHECK([for netinet/tcp.h], [apr_cv_hdr_netinet_tcp_h], --[AC_TRY_CPP( --[#ifdef HAVE_NETINET_IN_H -+[AC_PREPROC_IFELSE([AC_LANG_SOURCE([[#ifdef HAVE_NETINET_IN_H - #include <netinet/in.h> - #endif - #include <netinet/tcp.h> --], [apr_cv_hdr_netinet_tcp_h=yes], [apr_cv_hdr_netinet_tcp_h=no])]) -+]])],[apr_cv_hdr_netinet_tcp_h=yes],[apr_cv_hdr_netinet_tcp_h=no])]) - if test "$apr_cv_hdr_netinet_tcp_h" = "yes"; then - netinet_tcph=1 - AC_DEFINE([HAVE_NETINET_TCP_H], 1, [Defined if netinet/tcp.h is present]) -@@ -1039,7 +1036,7 @@ - if test "x$ac_cv_sizeof_voidp" != "x"; then - voidp_size=$ac_cv_sizeof_voidp - else -- AC_ERROR([Cannot determine size of void*]) -+ AC_MSG_ERROR([Cannot determine size of void*]) - fi - - dnl Checks for integer size -@@ -1378,7 +1375,7 @@ - fi - - AC_CACHE_CHECK(struct rlimit,ac_cv_struct_rlimit,[ --AC_TRY_RUN([ -+AC_RUN_IFELSE([AC_LANG_SOURCE([[ - #include <sys/types.h> - #include <sys/time.h> - #include <sys/resource.h> -@@ -1388,10 +1385,10 @@ - limit.rlim_cur = 0; - limit.rlim_max = 0; - exit(0); --}], [ -- ac_cv_struct_rlimit=yes ], [ -- ac_cv_struct_rlimit=no ], [ -- ac_cv_struct_rlimit=no ] ) ] ) -+}]])],[ -+ ac_cv_struct_rlimit=yes ],[ -+ ac_cv_struct_rlimit=no ],[ -+ ac_cv_struct_rlimit=no ]) ] ) - struct_rlimit=0 - test "x$ac_cv_struct_rlimit" = xyes && struct_rlimit=1 - AC_SUBST(struct_rlimit) -@@ -1405,7 +1402,7 @@ - - # Some systems return ENOSYS from sem_open. - AC_CACHE_CHECK(for working sem_open,ac_cv_func_sem_open,[ --AC_TRY_RUN([ -+AC_RUN_IFELSE([AC_LANG_SOURCE([[ - #include <errno.h> - #include <stdlib.h> - #include <fcntl.h> -@@ -1424,22 +1421,21 @@ - sem_close(psem); - sem_unlink(sem_name); - exit(0); --}], [ac_cv_func_sem_open=yes], [ac_cv_func_sem_open=no], --[ac_cv_func_sem_open=no])]) -+}]])],[ac_cv_func_sem_open=yes],[ac_cv_func_sem_open=no],[ac_cv_func_sem_open=no])]) - - # It's stupid, but not all platforms have union semun, even those that need it. - AC_MSG_CHECKING(for union semun in sys/sem.h) --AC_TRY_COMPILE([ -+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ - #include <sys/types.h> - #include <sys/ipc.h> - #include <sys/sem.h> --],[ -+]], [[ - union semun arg; - semctl(0, 0, 0, arg); --], [have_union_semun="1" union_semun=yes ] --msg=yes, [ -+]])],[have_union_semun="1" union_semun=yes -+msg=yes],[ - have_union_semun="0" --msg=no ] ) -+msg=no ]) - AC_MSG_RESULT([$msg]) - AC_SUBST(have_union_semun) - -@@ -1461,7 +1457,7 @@ - # Linux and older versions of AIX have this problem. - APR_IFALLYES(header:pthread.h define:PTHREAD_PROCESS_SHARED func:pthread_mutexattr_setpshared, [ - AC_CACHE_CHECK([for working PROCESS_SHARED locks], apr_cv_process_shared_works, [ -- AC_TRY_RUN([ -+ AC_RUN_IFELSE([AC_LANG_SOURCE([[ - #include <sys/types.h> - #include <pthread.h> - int main() -@@ -1479,7 +1475,7 @@ - if (pthread_mutex_destroy(&mutex)) - exit(5); - exit(0); -- }], [apr_cv_process_shared_works=yes], [apr_cv_process_shared_works=no])]) -+ }]])],[apr_cv_process_shared_works=yes],[apr_cv_process_shared_works=no],[])]) - # Override detection of pthread_mutexattr_setpshared - ac_cv_func_pthread_mutexattr_setpshared=$apr_cv_process_shared_works]) - -@@ -1488,15 +1484,15 @@ - if test "$ac_cv_func_pthread_mutexattr_setrobust_np" = "no"; then - AC_CACHE_CHECK([for pthread_mutexattr_setrobust_np with _POSIX_THREAD_PRIO_INHERIT], - [apr_cv_setrobust_with_prio_inherit], [ -- AC_TRY_COMPILE([#define _POSIX_THREAD_PRIO_INHERIT -+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#define _POSIX_THREAD_PRIO_INHERIT - #include <sys/types.h> --#include <pthread.h>],[ -+#include <pthread.h>]], [[ - int main() - { - pthread_mutexattr_t attr; - pthread_mutexattr_setrobust_np(&attr, PTHREAD_MUTEX_ROBUST_NP); - return 0; -- }], [apr_cv_setrobust_with_prio_inherit=yes], [apr_cv_setrobust_with_prio_inherit=no])]) -+ }]])],[apr_cv_setrobust_with_prio_inherit=yes],[apr_cv_setrobust_with_prio_inherit=no])]) - if test "$apr_cv_setrobust_with_prio_inherit" = "yes"; then - ac_cv_func_pthread_mutexattr_setrobust_np=yes - APR_ADDTO(CPPFLAGS, -D_POSIX_THREAD_PRIO_INHERIT) -@@ -1664,7 +1660,7 @@ - if test -r "$apr_devrandom"; then - rand="1" - else -- AC_ERROR([$apr_devrandom not found or unreadable.]) -+ AC_MSG_ERROR([$apr_devrandom not found or unreadable.]) - fi - fi - -@@ -1700,9 +1696,8 @@ - dnl ----------------------------- Checking for Time Support - echo "${nl}Checking for Time Support..." - AC_CACHE_CHECK([for tm_gmtoff in struct tm], ac_cv_struct_tm_gmtoff, --[AC_TRY_COMPILE([#include <sys/types.h> --#include <time.h>], [struct tm tm; tm.tm_gmtoff;], -- ac_cv_struct_tm_gmtoff=yes, ac_cv_struct_tm_gmtoff=no)]) -+[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/types.h> -+#include <time.h>]], [[struct tm tm; tm.tm_gmtoff;]])],[ac_cv_struct_tm_gmtoff=yes],[ac_cv_struct_tm_gmtoff=no])]) - - if test "$ac_cv_struct_tm_gmtoff" = "yes"; then - AC_DEFINE(HAVE_GMTOFF, 1, [Define if struct tm has a tm_gmtoff field]) -@@ -1711,14 +1706,14 @@ - dnl ----------------------------- Checking for Networking Support - echo "${nl}Checking for Networking support..." - AC_MSG_CHECKING(for in_addr in netinet/in.h) --AC_TRY_COMPILE([ -+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ - #include <sys/types.h> - #include <netinet/in.h> --],[ -+]], [[ - struct in_addr arg; - arg.s_addr = htonl(INADDR_ANY); --], [ have_in_addr="1" --msg=yes ] , [ have_in_addr="0" -+]])],[ have_in_addr="1" -+msg=yes ],[ have_in_addr="0" - msg=no ]) - AC_MSG_RESULT([$msg]) - -@@ -1920,12 +1915,13 @@ - dir=include/arch/unix - test -d $dir || $MKDIR $dir - --AC_OUTPUT([ -+AC_CONFIG_FILES([ - $MAKEFILE1 $MAKEFILE2 $MAKEFILE3 - include/apr.h - build/apr_rules.mk - apr-config --],[ -+]) -+AC_CONFIG_COMMANDS([default],[[ - for i in $SAVE_FILES; do - if cmp -s $i $i.save 2>/dev/null; then - mv $i.save $i -@@ -1934,7 +1930,8 @@ - rm -f $i.save - done - chmod +x apr-config --]) -+]],[[]]) -+AC_OUTPUT - - dnl ----------------------------- Fixup Makefiles for VPATH support - ---- httpd-2.0.48/./srclib/pcre/configure.in~configure -+++ httpd-2.0.48/./srclib/pcre/configure.in -@@ -3,7 +3,8 @@ - dnl This is required at the start; the name is the name of a file - dnl it should be seeing, to verify it is in the same directory. - --AC_INIT(dftables.c) -+AC_INIT -+AC_CONFIG_SRCDIR([dftables.c]) - - dnl Arrange to build config.h from config.in. Note that pcre.h is - dnl built differently, as it is just a "substitution" file. -@@ -101,4 +102,6 @@ - AC_SUBST(PCRE_POSIXLIB_VERSION) - - dnl This must be last; it determines what files are written as well as config.h --AC_OUTPUT(Makefile pcre.h:pcre.in pcre-config,[chmod a+x pcre-config]) -+AC_CONFIG_FILES([Makefile pcre.h:pcre.in pcre-config]) -+AC_CONFIG_COMMANDS([default],[[chmod a+x pcre-config]],[[]]) -+AC_OUTPUT ---- httpd-2.0.48/./srclib/apr-util/xml/expat/configure.in~configure -+++ httpd-2.0.48/./srclib/apr-util/xml/expat/configure.in -@@ -10,7 +10,8 @@ - dnl in the file COPYING that comes with this distribution. - dnl - --AC_INIT(Makefile.in) -+AC_INIT -+AC_CONFIG_SRCDIR([Makefile.in]) - AC_CONFIG_AUX_DIR(conftools) - - dnl -@@ -45,7 +46,7 @@ - - AC_CONFIG_HEADER(config.h) - --AC_CANONICAL_SYSTEM -+AC_CANONICAL_TARGET([]) - case "$host_alias" in - *os2*) - # Use a custom made libtool replacement -@@ -106,4 +107,5 @@ - - AC_CHECK_FUNCS(memmove bcopy) - --AC_OUTPUT(Makefile lib/Makefile lib/expat.h) -+AC_CONFIG_FILES([Makefile lib/Makefile lib/expat.h]) -+AC_OUTPUT ---- httpd-2.0.48/./srclib/apr-util/configure.in~configure -+++ httpd-2.0.48/./srclib/apr-util/configure.in -@@ -2,8 +2,9 @@ - dnl Process this file with autoconf to produce a configure script - dnl - --AC_PREREQ(2.13) --AC_INIT(export_vars.sh.in) -+AC_PREREQ(2.57) -+AC_INIT -+AC_CONFIG_SRCDIR([export_vars.sh.in]) - - AC_CONFIG_HEADER(include/private/apu_config.h) - AC_CONFIG_AUX_DIR(build) -@@ -30,7 +31,7 @@ - USE_VPATH=1 - fi - --AC_CANONICAL_SYSTEM -+AC_CANONICAL_TARGET([]) - - dnl - dnl compute the top directory of the build |