diff options
Diffstat (limited to 'recipes/linux/linux-gumstix-2.6.15/header.patch')
| -rw-r--r-- | recipes/linux/linux-gumstix-2.6.15/header.patch | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/recipes/linux/linux-gumstix-2.6.15/header.patch b/recipes/linux/linux-gumstix-2.6.15/header.patch new file mode 100644 index 0000000000..51cfa08cc6 --- /dev/null +++ b/recipes/linux/linux-gumstix-2.6.15/header.patch @@ -0,0 +1,87 @@ +Index: linux-2.6.15gum/include/asm-arm/arch-pxa/gumstix.h +=================================================================== +--- /dev/null ++++ linux-2.6.15gum/include/asm-arm/arch-pxa/gumstix.h +@@ -0,0 +1,82 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/gumstix.h ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++/* BTRESET - Reset line to Bluetooth module, active low signal. */ ++#define GPIO_GUMSTIX_BTRESET 7 ++#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) ++ ++ ++/* GPIOn - Input from MAX823 (or equiv), normalizing USB +5V ++ into a clean interrupt signal for determining cable presence ++ On the original gumstix, this is GPIO81, and GPIO83 needs to be defined as well. ++ On the gumstix F, this moves to GPIO17 and GPIO37 */ ++/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn ++ has detected a cable insertion; driven low otherwise. */ ++ ++#ifdef CONFIG_ARCH_GUMSTIX_ORIG ++ ++#define GPIO_GUMSTIX_USB_GPIOn 81 ++#define GPIO_GUMSTIX_USB_GPIOx 83 ++ ++#else ++ ++#define GPIO_GUMSTIX_USB_GPIOn 35 ++#define GPIO_GUMSTIX_USB_GPIOx 41 ++ ++#endif ++ ++#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) /* usb state change */ ++#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) ++#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) ++#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) ++ ++ ++/* ++ * SMC Ethernet definitions ++ * ETH_RST provides a hardware reset line to the ethernet chip ++ * ETH is the IRQ line in from the ethernet chip to the PXA ++ */ ++#define GPIO_GUMSTIX_ETH0_RST 80 ++#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) ++#define GPIO_GUMSTIX_ETH1_RST 52 ++#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) ++ ++#define GPIO_GUMSTIX_ETH0 36 ++#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) ++#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) ++#define GPIO_GUMSTIX_ETH1 27 ++#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) ++#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) ++ ++ ++/* ++ * The following are missing from pxa-regs.h ++ */ ++ ++#define GPIO4_nBVD1 4 ++#define GPIO4_nSTSCHG GPIO4_nBVD1 ++#define GPIO8_RESET 8 ++#define GPIO11_nPCD1 11 ++#define GPIO22_nINPACK 22 ++#define GPIO26_PRDY_nBSY0 26 ++#define GPIO36_nBVD2 36 ++ ++#define GPIO4_nBVD1_MD ( GPIO4_nBVD1| GPIO_IN ) ++#define GPIO4_nSTSCHG_MD ( GPIO4_nSTSCHG | GPIO_IN ) ++#define GPIO8_RESET_MD ( GPIO8_RESET | GPIO_OUT ) ++#define GPIO11_nPCD1_MD ( GPIO11_nPCD1 | GPIO_IN ) ++#define GPIO22_nINPACK_MD ( GPIO22_nINPACK | GPIO_IN ) ++#define GPIO26_PRDY_nBSY0_MD ( GPIO26_PRDY_nBSY0 | GPIO_IN ) ++#define GPIO36_nBVD2_MD ( GPIO36_nBVD2 | GPIO_IN ) ++ ++#define GUMSTIX_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) ++#define GUMSTIX_nPCD1_IRQ IRQ_GPIO(GPIO11_nPCD1) ++#define GUSMTIX_nBVD1_IRQ IRQ_GPIO(GPIO4_nBVD1) ++#define GUMSTIX_nBVD2_IRQ IRQ_GPIO(GPIO36_nBVD2) ++#define GUMSTIX_PRDY_nBSY0_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY0) |