diff options
Diffstat (limited to 'recipes/olsrd/files/olsrd.conf')
| -rw-r--r-- | recipes/olsrd/files/olsrd.conf | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/recipes/olsrd/files/olsrd.conf b/recipes/olsrd/files/olsrd.conf new file mode 100644 index 0000000000..dbd0472803 --- /dev/null +++ b/recipes/olsrd/files/olsrd.conf @@ -0,0 +1,151 @@ +# +# olsr.org configuration file +# + +# +# Periodically print the internal state, including information on +# route calculation +# + +DebugLevel 2 + +# +# Clear the screen each time the internal state changes +# + +ClearScreen yes + +# +# IP version to use +# + +IpVersion 4 + +# +# IPv4 HNAs - syntax: netaddr netmask +# + +Hna4 +{ +# 0.0.0.0 0.0.0.0 +} + +# +# Do not use hysteresis +# + +UseHysteresis no + +# +# If using hysteresis, use "smooth" parameters +# + +HystScaling 0.10 +HystThrHigh 0.80 +HystThrLow 0.30 + +# +# Which neighbours should be advertised via TC messages? +# +# 0 - only advertise our MPR selectors +# 1 - advertise our MPR selectors and our MPRs +# 2 - advertise all neighbors +# + +TcRedundancy 2 + +# +# Specifies by how many MPRs each two-hop neighbour should be covered +# + +MprCoverage 9 + +# +# Enable the link quality extensions? +# +# 0 - no +# 1 - yes, use link quality for MPR selection +# 2 - yes, use link quality for MPR selection and routing +# + +LinkQualityLevel 2 + +# +# Windows size for packet loss calculation +# + +LinkQualityWinSize 20 + +# +# Load the dot draw plugin +# + +LoadPlugin "olsrd_httpinfo.so.0.1" +{ + PlParam "Port" "8080" + PlParam "Net" "192.168.0.0 255.255.255.0" +} + +#LoadPlugin "olsrd_dot_draw.so.0.3" +#{ + # accept connection from IP: + # default 127.0.0.1 (localhost) + #PlParam "accept" "192.168.0.5" +#} + +# +# Interfaces - +# change to the name of your WLAN interface +# + +Interface "eth0" "wlan0" "wlan1" "ath0" "ath1" +{ + + # + # HELLO interval in seconds (float) + # + + HelloInterval 2.0 + + # + # HELLO validity time + # + + HelloValidityTime 40.0 + + # + # TC interval in seconds (float) + # + + TcInterval 3.0 + + # + # TC validity time + # + + TcValidityTime 15.0 + + # + # MID interval in seconds (float) + # + + MidInterval 5.0 + + # + # MID validity time + # + + MidValidityTime 15.0 + + # + # HNA interval in seconds (float) + # + + HnaInterval 5.0 + + # + # HNA validity time + # + + HnaValidityTime 15.0 +} |