diff options
Diffstat (limited to 'recipes')
29 files changed, 2883 insertions, 0 deletions
diff --git a/recipes/gcc/gcc-4.3.3.inc b/recipes/gcc/gcc-4.3.3.inc index 2947b185b9..6ccb0f1895 100644 --- a/recipes/gcc/gcc-4.3.3.inc +++ b/recipes/gcc/gcc-4.3.3.inc @@ -65,6 +65,33 @@ SRC_URI_append_sh3 = " file://sh3-installfix-fixheaders.patch;patch=1 " SRC_URI_append_sh4 = " file://sh_unwind.patch;patch=1 \ file://gcc-4.2.3-linux-multilib-fix.patch;patch=1 \ " +SRC_URI_append_ep93xx = " \ + file://ep93xx/arm-crunch-readme.patch;patch=1 \ + file://ep93xx/arm-crunch-saveregs.patch;patch=1 \ + file://ep93xx/arm-crunch-scratch.patch;patch=1 \ + file://ep93xx/arm-crunch-eabi-ieee754-endian-littleword-littlebyte.patch;patch=1 \ + file://ep93xx/arm-crunch-eabi-mvf0-scratch-ieee754.patch;patch=1 \ + file://ep93xx/arm-crunch-20000320.patch;patch=1 \ + file://ep93xx/arm-crunch-disable-cmpdi.patch;patch=1 \ + file://ep93xx/arm-crunch-fix-64bit-const-offsets.patch;patch=1 \ + file://ep93xx/arm-crunch-fp_consts.patch;patch=1 \ + file://ep93xx/arm-crunch-neg-enable.patch;patch=1 \ + file://ep93xx/arm-crunch-neg-protect.patch;patch=1 \ + file://ep93xx/arm-crunch-repair-truncxfsi.patch;patch=1 \ + file://ep93xx/arm-crunch-floatsi-no-scratch.patch;patch=1 \ + file://ep93xx/arm-crunch-movsf-movdf-Uy.patch;patch=1 \ + file://ep93xx/arm-crunch-drop-thumb2.patch;patch=1 \ + file://ep93xx/arm-crunch-arm_dbx_register_number.patch;patch=1 \ + file://ep93xx/arm-crunch-pipeline.patch;patch=1 \ + file://ep93xx/arm-crunch-ccmav-mode.patch;patch=1 \ + file://ep93xx/arm-crunch-cfcpy-with-cfsh64.patch;patch=1 \ + file://ep93xx/arm-crunch-mieee.patch;patch=1 \ + file://ep93xx/arm-size-bugfix.patch;patch=1 \ + file://ep93xx/arm-prologue_use-length.patch;patch=1 \ + file://ep93xx/arm-crunch-cftruncd32-attr.patch;patch=1 \ + file://ep93xx/arm-crunch-fix-cirrus-reorg5.patch;patch=1 \ + file://ep93xx/arm-crunch-cirrus-di-flag.patch;patch=1 \ +" # Language Overrides FORTRAN = "" FORTRAN_linux-gnueabi = ",fortran" diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/README b/recipes/gcc/gcc-4.3.3/ep93xx/README new file mode 100644 index 0000000000..a656a850cb --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/README @@ -0,0 +1,11 @@ +This is a set of patches for gcc-4.3 that fix code generation for the +Maverick Crunch FPU present in Cirrus Logic EP93xx devices. + +They are based on the patch ideas for OpenEmbedded that Hasjim Williams sent me +privately in April 2008, with my own reimplementation of the CCMAV mode and the +addition of a -mieee switch to fully respect denormalized values (with a 50% +speed penalty). + +See the comments at the top of each patch file for further details. + + Martin Guy <martinwguy@yahoo.it>, 21 November 2008 - 12 March 2009 diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/URL b/recipes/gcc/gcc-4.3.3/ep93xx/URL new file mode 100644 index 0000000000..7761ed8cee --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/URL @@ -0,0 +1 @@ +http://martinwguy.co.uk/martin/crunch/gcc-4.3.3-patches/ diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-20000320.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-20000320.patch new file mode 100644 index 0000000000..8a9836bb2e --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-20000320.patch @@ -0,0 +1,13 @@ +Fix one test in the testsuite to know about Maverick crunch word order + +--- gcc-4.3.2/gcc/testsuite/gcc.c-torture/execute/ieee/20000320-1.c.original 2007-06-07 16:33:44.000000000 +1000 ++++ gcc-4.3.2/gcc/testsuite/gcc.c-torture/execute/ieee/20000320-1.c 2007-06-07 16:34:05.000000000 +1000 +@@ -48,7 +48,7 @@ + exit (0); + + c(0x3690000000000000ULL, 0x00000000U); +-#if (defined __arm__ || defined __thumb__) && ! (defined __ARMEB__ || defined __VFP_FP__) ++#if (defined __arm__ || defined __thumb__) && ! (defined __ARMEB__ || defined __VFP_FP__) && ! (defined __MAVERICK__) + /* The ARM always stores FP numbers in big-wordian format, + even when running in little-byteian mode. */ + c(0x0000000136900000ULL, 0x00000001U); diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-arm_dbx_register_number.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-arm_dbx_register_number.patch new file mode 100644 index 0000000000..4d4b9da298 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-arm_dbx_register_number.patch @@ -0,0 +1,15 @@ +Include the Maverick Crunch registers in the GCC->DWARF2 register number +mapping. Without this, cc -g with maverick hardfloat fails. + +--- gcc-4.3.2/gcc/config/arm/arm.c-original 2008-04-11 16:16:25.000000000 +1000 ++++ gcc-4.3.2/gcc/config/arm/arm.c 2008-04-11 16:19:15.000000000 +1000 +@@ -18298,6 +18298,9 @@ + if (IS_FPA_REGNUM (regno)) + return (TARGET_AAPCS_BASED ? 96 : 16) + regno - FIRST_FPA_REGNUM; + ++ if (IS_CIRRUS_REGNUM (regno)) ++ return 28 + regno - FIRST_CIRRUS_FP_REGNUM; ++ + /* FIXME: VFPv3 register numbering. */ + if (IS_VFP_REGNUM (regno)) + return 64 + regno - FIRST_VFP_REGNUM; diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-ccmav-mode.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-ccmav-mode.patch new file mode 100644 index 0000000000..0edb1c0334 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-ccmav-mode.patch @@ -0,0 +1,734 @@ +These modifications implement a new condition code mode CCMAV which is used +on floating point comparisons that were performed in the Maverick Crunch FPU. + +This is necessary because the Maverick sets the conditions codes differently +from the ARM/FPA/VFP. Since we do not use the Maverick's 32-bit int modes nor +its 64-bit comparison, these different conditions pertain to all floating point +comparisons when compiling for Maverick hardfloat. + + ARM/FPA/VFP - (cmp*): MaverickCrunch - (cfcmp*): + N Z C V N Z C V + A == B 0 1 1 0 A == B 0 1 0 0 + A < B 1 0 0 0 A < B 1 0 0 0 + A > B 0 0 1 0 A > B 1 0 0 1 + unord 0 0 1 1 unord 0 0 0 0 + +The new mode is set on floating point comparisons instead of the usual +CCFP and CCFPE, then acted upon when the conditional instruction flags +are output. + +Furthermore, the list of conditions that cannot be tested with a single +conditional test is different. On ARM/FPA/VFP it is UNEQ and LTGT while +on Maverick it is GE UNLT ORDERED and UNORDERED. +We handle this with a new predicate "maverick_comparison_operator" that omits +the comparisons that cannot be represented and we split the cond_exec pattern +into for CCMAV mode plus a separate rule for every non-Maverick CC mode. +This prevents generation of conditional instructions that cannot be represented. + +Although Maverick can also represent LTGT and UNEQ with a single test, we do not +include these since it would mean splitting every other rule that uses +"arm_comparison_operator" in a similar way for very little gain. + +A few other tests are added to prevent optimisations that would +generate these unrepresentable conditions. + +None of these changes affect code generation for ARM or for other FPUs. + +One missed optimisation: movsfcc and movdfcc have been +disabled for Maverick because we don't use the Maverick's instructions +conditionally to avoid hardware bugs. But a limited movsfcc and movdfcc +could be included when Maverick, that applies to all modes where the things +to be moved do not involve the Maverick registers, if such a thing is feasible +without the optimizer moving things into registers between the expand and the +instruction generation. + + Martin Guy <martinwguy@yahoo.it>, November 2008 + +--- gcc-4.3.2/gcc/config/arm/arm-modes.def.old 2007-08-02 11:49:31.000000000 +0100 ++++ gcc-4.3.2/gcc/config/arm/arm-modes.def 2008-11-18 14:39:39.000000000 +0000 +@@ -27,6 +27,7 @@ + + /* CCFPEmode should be used with floating inequalities, + CCFPmode should be used with floating equalities. ++ CCMAVmode should be used with comparisons performed in the Maverick FPU + CC_NOOVmode should be used with SImode integer equalities. + CC_Zmode should be used if only the Z flag is set correctly + CC_Nmode should be used if only the N (sign) flag is set correctly +@@ -37,6 +38,7 @@ + CC_MODE (CC_SWP); + CC_MODE (CCFP); + CC_MODE (CCFPE); ++CC_MODE (CCMAV); + CC_MODE (CC_DNE); + CC_MODE (CC_DEQ); + CC_MODE (CC_DLE); +--- gcc-4.3.2/gcc/config/arm/arm.h 2008-11-18 15:32:10.000000000 +0000 ++++ cluster/gcc-4.3.2/gcc/config/arm/arm.h 2008-11-21 19:24:10.000000000 +0000 +@@ -2306,7 +2306,7 @@ + #define REVERSIBLE_CC_MODE(MODE) 1 + + #define REVERSE_CONDITION(CODE,MODE) \ +- (((MODE) == CCFPmode || (MODE) == CCFPEmode) \ ++ (((MODE) == CCFPmode || (MODE) == CCFPEmode || (MODE) == CCMAVmode) \ + ? reverse_condition_maybe_unordered (code) \ + : reverse_condition (code)) + +--- gcc-4.3.2/gcc/config/arm/predicates.md.old 2007-08-02 11:49:31.000000000 +0100 ++++ gcc-4.3.2/gcc/config/arm/predicates.md 2008-11-20 15:05:50.000000000 +0000 +@@ -195,6 +195,16 @@ + (define_special_predicate "arm_comparison_operator" + (match_code "eq,ne,le,lt,ge,gt,geu,gtu,leu,ltu,unordered,ordered,unlt,unle,unge,ungt")) + ++;; Comparisons that can be predicated after a Maverick FP comparison, true for ++;; floating point comparisons other than GE, UNLT, UNORDERED or ORDERED ++;; ++;; Maverick can also match LTGT and UNEQ with a single condition ++;; but including these means duplicating every rule containing ++;; arm_comparison_operator including cond_branch and all the *cc rules. ++;; Extra speed when predicating ltgt and uneq is rare enough not to be worth it. ++(define_special_predicate "maverick_comparison_operator" ++(match_code "eq,ne,le,lt,gt,unle,unge,ungt")) ++ + (define_special_predicate "minmax_operator" + (and (match_code "smin,smax,umin,umax") + (match_test "mode == GET_MODE (op)"))) +--- gcc-4.3.2/gcc/config/arm/arm.c.old 2008-11-19 10:01:53.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.c 2008-11-21 12:49:48.000000000 +0000 +@@ -1720,6 +1720,14 @@ + return 0; + } + ++ /* Optimisation of __builtin_inunordered at the end of a ++ * function would generate conditional return on (UN)ORDERED, which cannot ++ * be represented by a single condition code test on Maverick. ++ * Since we do not have access to the specific condition used, ++ * we just disable all conditional returns on Maverick. */ ++ if (iscond && TARGET_MAVERICK && TARGET_HARD_FLOAT) ++ return 0; ++ + /* If there are saved registers but the LR isn't saved, then we need + two instructions for the return. */ + if (saved_int_regs && !(saved_int_regs & (1 << LR_REGNUM))) +@@ -7733,6 +7741,10 @@ + comparison, and CCFPE otherwise. */ + if (GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT) + { ++ /* Comparisons performed in the Maverick FPU set the CCs their own way. */ ++ if (TARGET_HARD_FLOAT && TARGET_MAVERICK) ++ return CCMAVmode; ++ + switch (op) + { + case EQ: +@@ -7751,8 +7763,6 @@ + case LE: + case GT: + case GE: +- if (TARGET_HARD_FLOAT && TARGET_MAVERICK) +- return CCFPmode; + return CCFPEmode; + + default: +@@ -13367,6 +13377,29 @@ + default: gcc_unreachable (); + } + ++ case CCMAVmode: ++ /* Maverick cmp sets the condition codes differently from ARM/FPA/VFP */ ++ switch (comp_code) ++ { ++ case GT: return ARM_VS; ++ case LE: return ARM_LE; ++ case LT: return ARM_LT; ++ case NE: return ARM_NE; ++ case EQ: return ARM_EQ; ++ case UNLE: return ARM_VC; ++ case UNGT: return ARM_GT; ++ case UNGE: return ARM_GE; ++ case UNEQ: return ARM_PL; ++ case LTGT: return ARM_MI; ++ /* These cannot be represented by a single condition code. */ ++ case GE: /* Fall through */ ++ case UNLT:/* Fall through */ ++ case ORDERED:/* Fall through */ ++ case UNORDERED:/* Fall through */ ++ default: ++ gcc_unreachable (); ++ } ++ + case CC_SWPmode: + switch (comp_code) + { +--- gcc-4.3.2/gcc/config/arm/arm.md.old 2008-11-21 19:08:44.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.md 2008-11-21 19:09:18.000000000 +0000 +@@ -258,7 +258,9 @@ + ; they are altered at all + ; + ; JUMP_CLOB is used when the condition cannot be represented by a single +-; instruction (UNEQ and LTGT). These cannot be predicated. ++; instruction. This applies to UNEQ and LTGT for ARM/FPA/VFP comparisons, ++; GE UNLT ORDERED and UNORDERED for Maverick comparisons. ++; These cannot be predicated. + ; + ; NOCOND means that the condition codes are neither altered nor affect the + ; output of this insn +@@ -7332,9 +7334,9 @@ + + ;; Cirrus SF compare instruction + (define_insn "*cirrus_cmpsf" +- [(set (reg:CCFP CC_REGNUM) +- (compare:CCFP (match_operand:SF 0 "cirrus_fp_register" "v") +- (match_operand:SF 1 "cirrus_fp_register" "v")))] ++ [(set (reg:CCMAV CC_REGNUM) ++ (compare:CCMAV (match_operand:SF 0 "cirrus_fp_register" "v") ++ (match_operand:SF 1 "cirrus_fp_register" "v")))] + "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfcmps%?\\tr15, %V0, %V1" + [(set_attr "type" "farith") +@@ -7343,9 +7347,9 @@ + + ;; Cirrus DF compare instruction + (define_insn "*cirrus_cmpdf" +- [(set (reg:CCFP CC_REGNUM) +- (compare:CCFP (match_operand:DF 0 "cirrus_fp_register" "v") +- (match_operand:DF 1 "cirrus_fp_register" "v")))] ++ [(set (reg:CCMAV CC_REGNUM) ++ (compare:CCMAV (match_operand:DF 0 "cirrus_fp_register" "v") ++ (match_operand:DF 1 "cirrus_fp_register" "v")))] + "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfcmpd%?\\tr15, %V0, %V1" + [(set_attr "type" "farith") +@@ -7482,12 +7484,18 @@ + "operands[1] = arm_gen_compare_reg (LTU, arm_compare_op0, arm_compare_op1);" + ) + ++;; Some of the following patterns may need two branch instructions, since ++;; there is no single instruction that will handle all cases. Specifically: ++;; ARM/FPA/VFP cannot test UNEQ and LTGT ++;; Maverick cannot test GE on floating point values, UNLT, ORDERED or UNORDERED. ++ + (define_expand "bunordered" + [(set (pc) + (if_then_else (unordered (match_dup 1) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNORDERED, arm_compare_op0, + arm_compare_op1);" + ) +@@ -7497,7 +7505,8 @@ + (if_then_else (ordered (match_dup 1) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (ORDERED, arm_compare_op0, + arm_compare_op1);" + ) +@@ -7507,7 +7516,8 @@ + (if_then_else (ungt (match_dup 1) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNGT, arm_compare_op0, arm_compare_op1);" + ) + +@@ -7516,7 +7526,8 @@ + (if_then_else (unlt (match_dup 1) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNLT, arm_compare_op0, arm_compare_op1);" + ) + +@@ -7525,7 +7536,8 @@ + (if_then_else (unge (match_dup 1) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNGE, arm_compare_op0, arm_compare_op1);" + ) + +@@ -7534,18 +7546,18 @@ + (if_then_else (unle (match_dup 1) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNLE, arm_compare_op0, arm_compare_op1);" + ) + +-;; The following two patterns need two branch instructions, since there is +-;; no single instruction that will handle all cases. + (define_expand "buneq" + [(set (pc) + (if_then_else (uneq (match_dup 1) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNEQ, arm_compare_op0, arm_compare_op1);" + ) + +@@ -7554,7 +7566,8 @@ + (if_then_else (ltgt (match_dup 1) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (LTGT, arm_compare_op0, arm_compare_op1);" + ) + +@@ -7562,7 +7575,7 @@ + ;; Patterns to match conditional branch insns. + ;; + +-; Special pattern to match UNEQ. ++; Special pattern to match UNEQ for FPA and VFP. + (define_insn "*arm_buneq" + [(set (pc) + (if_then_else (uneq (match_operand 1 "cc_register" "") (const_int 0)) +@@ -7578,7 +7591,7 @@ + (set_attr "length" "8")] + ) + +-; Special pattern to match LTGT. ++; Special pattern to match LTGT for FPA and VFP. + (define_insn "*arm_bltgt" + [(set (pc) + (if_then_else (ltgt (match_operand 1 "cc_register" "") (const_int 0)) +@@ -7594,6 +7607,101 @@ + (set_attr "length" "8")] + ) + ++; Special pattern to match floating point GE for Maverick. ++(define_insn "*cirrus_bge" ++ [(set (pc) ++ (if_then_else (ge (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (label_ref (match_operand 0 "" "")) ++ (pc)))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"beq\\t%l0\;bvs\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob") ++ (set_attr "length" "8")] ++) ++ ++; Special pattern to match UNORDERED for Maverick. ++(define_insn "*cirrus_bunordered" ++ [(set (pc) ++ (if_then_else (unordered (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (label_ref (match_operand 0 "" "")) ++ (pc)))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"beq\\t.+12\;bmi\\t.+8\;b\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob") ++ (set_attr "length" "12")] ++) ++ ++; Special pattern to match ORDERED for Maverick. ++(define_insn "*cirrus_bordered" ++ [(set (pc) ++ (if_then_else (ordered (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (label_ref (match_operand 0 "" "")) ++ (pc)))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"beq\\t%l0\;bmi\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob") ++ (set_attr "length" "8")] ++) ++ ++; Special pattern to match UNLT for Maverick. ++(define_insn "*cirrus_bunlt" ++ [(set (pc) ++ (if_then_else (unlt (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (label_ref (match_operand 0 "" "")) ++ (pc)))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"beq\\t.+12\;bvs\\t.+8\;b\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob") ++ (set_attr "length" "12")] ++) ++ ++; Special atterns to match UNEQ and LTGT for Maverick, to handle ++; the two cases not covered by generic *arm_cond_branch ++ ++(define_insn "*cirrus_buneq" ++ [(set (pc) ++ (if_then_else (uneq (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (label_ref (match_operand 0 "" "")) ++ (pc)))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"bpl\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob")] ++) ++ ++(define_insn "*cirrus_bltgt" ++ [(set (pc) ++ (if_then_else (ltgt (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (label_ref (match_operand 0 "" "")) ++ (pc)))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"bmi\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob")] ++) ++ + (define_insn "*arm_cond_branch" + [(set (pc) + (if_then_else (match_operator 1 "arm_comparison_operator" +@@ -7613,7 +7721,7 @@ + (set_attr "type" "branch")] + ) + +-; Special pattern to match reversed UNEQ. ++; Special pattern to match reversed UNEQ for FPA and VFP. + (define_insn "*arm_buneq_reversed" + [(set (pc) + (if_then_else (uneq (match_operand 1 "cc_register" "") (const_int 0)) +@@ -7629,7 +7737,7 @@ + (set_attr "length" "8")] + ) + +-; Special pattern to match reversed LTGT. ++; Special pattern to match reversed LTGT for FPA and VFP. + (define_insn "*arm_bltgt_reversed" + [(set (pc) + (if_then_else (ltgt (match_operand 1 "cc_register" "") (const_int 0)) +@@ -7645,6 +7753,101 @@ + (set_attr "length" "8")] + ) + ++; Patterns to match reversed UNEQ and LTGT for Maverick, the two cases ++; not covered by generic "*arm_cond_branch_reversed" ++ ++(define_insn "*cirrus_buneq_reversed" ++ [(set (pc) ++ (if_then_else (uneq (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (pc) ++ (label_ref (match_operand 0 "" ""))))] ++ "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"bmi\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob")] ++) ++ ++(define_insn "*cirrus_bltgt_reversed" ++ [(set (pc) ++ (if_then_else (ltgt (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (pc) ++ (label_ref (match_operand 0 "" ""))))] ++ "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"bpl\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob")] ++) ++ ++; Special pattern to match reversed floating point GE for Maverick. ++(define_insn "*cirrus_bge_reversed" ++ [(set (pc) ++ (if_then_else (ge (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (pc) ++ (label_ref (match_operand 0 "" ""))))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"beq\\t.+12\;bvs\\t.+8\;b\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob") ++ (set_attr "length" "12")] ++) ++ ++; Special pattern to match reversed UNORDERED for Maverick. ++(define_insn "*cirrus_bunordered_reversed" ++ [(set (pc) ++ (if_then_else (unordered (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (pc) ++ (label_ref (match_operand 0 "" ""))))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"beq\\t%l0\;bmi\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob") ++ (set_attr "length" "8")] ++) ++ ++; Special pattern to match reversed ORDERED for Maverick. ++(define_insn "*cirrus_bordered_reversed" ++ [(set (pc) ++ (if_then_else (ordered (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (pc) ++ (label_ref (match_operand 0 "" ""))))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"beq\\t.+12\;bmi\\t.+8\;b\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob") ++ (set_attr "length" "12")] ++) ++ ++; Special pattern to match reversed UNLT for Maverick. ++(define_insn "*cirrus_bunlt_reversed" ++ [(set (pc) ++ (if_then_else (unlt (match_operand:CCMAV 1 "cc_register" "") (const_int 0)) ++ (pc) ++ (label_ref (match_operand 0 "" ""))))] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "* ++ gcc_assert (!arm_ccfsm_state); ++ ++ return \"beq\\t%l0\;bvs\\t%l0\"; ++ " ++ [(set_attr "conds" "jump_clob") ++ (set_attr "length" "8")] ++) ++ + (define_insn "*arm_cond_branch_reversed" + [(set (pc) + (if_then_else (match_operator 1 "arm_comparison_operator" +@@ -7696,11 +7899,16 @@ + "operands[1] = arm_gen_compare_reg (LE, arm_compare_op0, arm_compare_op1);" + ) + ++; SGE can only be represented as a single condition code on ARM/VFP/FPA, ++; not with Maverick when the operands are floating point. + (define_expand "sge" + [(set (match_operand:SI 0 "s_register_operand" "") + (ge:SI (match_dup 1) (const_int 0)))] + "TARGET_32BIT" +- "operands[1] = arm_gen_compare_reg (GE, arm_compare_op0, arm_compare_op1);" ++ "if (TARGET_HARD_FLOAT && TARGET_MAVERICK ++ && GET_MODE_CLASS (GET_MODE (arm_compare_op0)) == MODE_FLOAT) ++ FAIL; ++ operands[1] = arm_gen_compare_reg (GE, arm_compare_op0, arm_compare_op1);" + ) + + (define_expand "slt" +@@ -7738,6 +7946,7 @@ + "operands[1] = arm_gen_compare_reg (LTU, arm_compare_op0, arm_compare_op1);" + ) + ++; SORDERED and SUNORDERED cannot be represented on Maverick + (define_expand "sunordered" + [(set (match_operand:SI 0 "s_register_operand" "") + (unordered:SI (match_dup 1) (const_int 0)))] +@@ -7757,7 +7966,8 @@ + (define_expand "sungt" + [(set (match_operand:SI 0 "s_register_operand" "") + (ungt:SI (match_dup 1) (const_int 0)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNGT, arm_compare_op0, + arm_compare_op1);" + ) +@@ -7765,11 +7975,13 @@ + (define_expand "sunge" + [(set (match_operand:SI 0 "s_register_operand" "") + (unge:SI (match_dup 1) (const_int 0)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNGE, arm_compare_op0, + arm_compare_op1);" + ) + ++; SUNLT cannot be represented on Maverick + (define_expand "sunlt" + [(set (match_operand:SI 0 "s_register_operand" "") + (unlt:SI (match_dup 1) (const_int 0)))] +@@ -7781,7 +7993,8 @@ + (define_expand "sunle" + [(set (match_operand:SI 0 "s_register_operand" "") + (unle:SI (match_dup 1) (const_int 0)))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP || TARGET_MAVERICK)" + "operands[1] = arm_gen_compare_reg (UNLE, arm_compare_op0, + arm_compare_op1);" + ) +@@ -8039,20 +8252,32 @@ + enum rtx_code code = GET_CODE (operands[1]); + rtx ccreg; + +- if (code == UNEQ || code == LTGT) +- FAIL; ++ /* Reject comparisons not representable by a single condition code */ ++ if (TARGET_HARD_FLOAT && TARGET_MAVERICK ++ && GET_MODE_CLASS (GET_MODE (arm_compare_op0)) == MODE_FLOAT) ++ { ++ if (code == GE || code == UNLT || code == ORDERED || code == UNORDERED) ++ FAIL; ++ } ++ else ++ { ++ if (code == UNEQ || code == LTGT) ++ FAIL; ++ } + + ccreg = arm_gen_compare_reg (code, arm_compare_op0, arm_compare_op1); + operands[1] = gen_rtx_fmt_ee (code, VOIDmode, ccreg, const0_rtx); + }" + ) + ++; We do not use Maverick conditional FP instructions to avoid hardware bugs ++ + (define_expand "movsfcc" + [(set (match_operand:SF 0 "s_register_operand" "") + (if_then_else:SF (match_operand 1 "arm_comparison_operator" "") + (match_operand:SF 2 "s_register_operand" "") + (match_operand:SF 3 "nonmemory_operand" "")))] +- "TARGET_32BIT" ++ "TARGET_32BIT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK)" + " + { + enum rtx_code code = GET_CODE (operands[1]); +@@ -10419,7 +10644,7 @@ + + operands[5] = gen_rtx_REG (mode, CC_REGNUM); + operands[6] = gen_rtx_COMPARE (mode, operands[2], operands[3]); +- if (mode == CCFPmode || mode == CCFPEmode) ++ if (mode == CCFPmode || mode == CCFPEmode || mode == CCMAVmode) + rc = reverse_condition_maybe_unordered (rc); + else + rc = reverse_condition (rc); +@@ -10470,7 +10695,7 @@ + + operands[6] = gen_rtx_REG (mode, CC_REGNUM); + operands[7] = gen_rtx_COMPARE (mode, operands[2], operands[3]); +- if (mode == CCFPmode || mode == CCFPEmode) ++ if (mode == CCFPmode || mode == CCFPEmode || mode == CCMAVmode) + rc = reverse_condition_maybe_unordered (rc); + else + rc = reverse_condition (rc); +@@ -10502,7 +10727,7 @@ + + operands[6] = gen_rtx_REG (mode, CC_REGNUM); + operands[7] = gen_rtx_COMPARE (mode, operands[2], operands[3]); +- if (mode == CCFPmode || mode == CCFPEmode) ++ if (mode == CCFPmode || mode == CCFPEmode || mode == CCMAVmode) + rc = reverse_condition_maybe_unordered (rc); + else + rc = reverse_condition (rc); +@@ -10809,13 +11034,75 @@ + "TARGET_32BIT && arm_arch5e" + "pld\\t%a0") + ++;; Special predication patterns for Maverick Crunch floating-point ++;; which has a different set of predicable conditions after a floating ++;; point comparison. ++ ++(define_cond_exec ++ [(match_operator 0 "maverick_comparison_operator" ++ [(match_operand:CCMAV 1 "cc_register" "") ++ (const_int 0)])] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "" ++) ++ ++;; Every else is the same as the general ARM pattern. ++ ++(define_cond_exec ++ [(match_operator 0 "arm_comparison_operator" ++ [(match_operand:CC_NOOV 1 "cc_register" "") ++ (const_int 0)])] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "" ++) ++ ++(define_cond_exec ++ [(match_operator 0 "arm_comparison_operator" ++ [(match_operand:CC_Z 1 "cc_register" "") ++ (const_int 0)])] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "" ++) ++ ++(define_cond_exec ++ [(match_operator 0 "arm_comparison_operator" ++ [(match_operand:CC_SWP 1 "cc_register" "") ++ (const_int 0)])] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "" ++) ++ ++(define_cond_exec ++ [(match_operator 0 "arm_comparison_operator" ++ [(match_operand:CC_C 1 "cc_register" "") ++ (const_int 0)])] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "" ++) ++ ++(define_cond_exec ++ [(match_operator 0 "arm_comparison_operator" ++ [(match_operand:CC_N 1 "cc_register" "") ++ (const_int 0)])] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "" ++) ++ ++(define_cond_exec ++ [(match_operator 0 "arm_comparison_operator" ++ [(match_operand:CC 1 "cc_register" "") ++ (const_int 0)])] ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "" ++) ++ + ;; General predication pattern + + (define_cond_exec + [(match_operator 0 "arm_comparison_operator" + [(match_operand 1 "cc_register" "") + (const_int 0)])] +- "TARGET_32BIT" ++ "TARGET_32BIT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK)" + "" + ) + diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cfcpy-with-cfsh64.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cfcpy-with-cfsh64.patch new file mode 100644 index 0000000000..6260699167 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cfcpy-with-cfsh64.patch @@ -0,0 +1,27 @@ +cfcpys and cfcpyd have hardware bugs which mean they truncate denormalized +values to zero and convert minus zero to plus zero. + +A 64-bit shift with a shift count of 0 copies them bitwise. + + Martin Guy <martinwguy@yahoo.it>, December 2008 + +--- gcc-4.3.2/gcc/config/arm/cirrus.md.old 2008-11-21 19:06:37.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2008-12-03 12:13:08.000000000 +0000 +@@ -485,7 +485,7 @@ + && (GET_CODE (operands[0]) != MEM + || register_operand (operands[1], SFmode))" + "@ +- cfcpys%?\\t%V0, %V1 ++ cfsh64%?\\t%Z0, %Z1, #0\\t%@ float + cfldrs%?\\t%V0, %1 + cfmvsr%?\\t%V0, %1 + cfmvrs%?\\t%0, %V1 +@@ -514,7 +514,7 @@ + case 1: return \"stm%?ia\\t%m0, %M1\\t%@ double\"; + case 2: return \"#\"; + case 3: case 4: return output_move_double (operands); +- case 5: return \"cfcpyd%?\\t%V0, %V1\"; ++ case 5: return \"cfsh64%?\\t%Z0, %Z1, #0\\t%@ double\"; + case 6: return \"cfldrd%?\\t%V0, %1\"; + case 7: return \"cfmvdlr\\t%V0, %Q1\;cfmvdhr%?\\t%V0, %R1\"; + case 8: return \"cfmvrdl%?\\t%Q0, %V1\;cfmvrdh%?\\t%R0, %V1\"; diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cftruncd32-attr.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cftruncd32-attr.patch new file mode 100644 index 0000000000..bdc603ac91 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cftruncd32-attr.patch @@ -0,0 +1,12 @@ +--- gcc-4.3.2/gcc/config/arm/cirrus.md.old 2009-02-16 16:19:19.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2009-03-10 12:13:10.000000000 +0000 +@@ -425,7 +425,8 @@ + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cftruncd32%?\\t%Y2, %V1\;cfmvr64l%?\\t%0, %Z2" + [(set_attr "type" "f_cvt") +- (set_attr "length" "8")] ++ (set_attr "length" "8") ++ (set_attr "cirrus" "normal")] + ) + + ; Cirrus hardware bugs: denormalized values on input are truncated to zero diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cirrus-di-flag.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cirrus-di-flag.patch new file mode 100644 index 0000000000..c25c108eaa --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-cirrus-di-flag.patch @@ -0,0 +1,248 @@ +This patch disables all 64-bit integer operations of the MaverickCrunch unit +unless the new flag -mcirrus-di is supplied (as well as -mcpu-ep9312 +-mfpu=maverick -mfloat-abi=softfp). + +The 64-bit instructions (or their GCC support) are known to be buggy, as shown +for example by openssl-0.9.8g's testsuite: +In the unpacked openssl source directory: + $ ./config + $ vi Makefile + > /^CC= /s/$/-4.3-crunch/ + > /^CFLAG= /s/$/ -mcpu=ep9312 -mfpu=maverick -mfloat-abi=softfp -mcirrus-di/ + > :wq + $ make + $ make test +fails if either of the two files: */sha/sha512.c and */bn/bn_asm.c are compiled +with cirrus 64-bit support enabled. If you disable cfmul64, sha512.c works ok, +but I've disabled everything down to cfadd64, cfsub64 and 64-bit load and store +and bn_asm still fails, which suggests another hardware timing bug. + +--- gcc-4.3.2/gcc/config/arm/arm.opt.old 2009-03-10 22:08:13.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.opt 2009-03-10 12:47:31.000000000 +0000 +@@ -63,6 +63,10 @@ + Target Report Mask(CALLER_INTERWORKING) + Thumb: Assume function pointers may go to non-Thumb aware code + ++mcirrus-di ++Target Report Mask(CIRRUS_DI) ++Cirrus: Enable processing of 64-bit integers in the MaverickCrunch unit (buggy) ++ + mcpu= + Target RejectNegative Joined + Specify the name of the target CPU +--- gcc-4.3.2/gcc/config/arm/arm.c.old 2009-03-10 09:32:31.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.c 2009-03-10 12:44:48.000000000 +0000 +@@ -13917,7 +13917,8 @@ + upper 32 bits. This causes gcc all sorts of grief. We can't + even split the registers into pairs because Cirrus SI values + get sign extended to 64bits-- aldyh. */ +- return (GET_MODE_CLASS (mode) == MODE_FLOAT) || (mode == DImode); ++ return (GET_MODE_CLASS (mode) == MODE_FLOAT) ++ || (mode == DImode && TARGET_CIRRUS_DI); + + if (TARGET_HARD_FLOAT && TARGET_VFP + && IS_VFP_REGNUM (regno)) +--- gcc-4.3.2/gcc/config/arm/arm.md.old 2009-03-10 12:14:01.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.md 2009-03-10 12:42:55.000000000 +0000 +@@ -369,7 +369,7 @@ + (clobber (reg:CC CC_REGNUM))])] + "TARGET_EITHER" + " +- if (TARGET_HARD_FLOAT && TARGET_MAVERICK) ++ if (TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI) + { + if (!cirrus_fp_register (operands[0], DImode)) + operands[0] = force_reg (DImode, operands[0]); +@@ -405,7 +405,7 @@ + (plus:DI (match_operand:DI 1 "s_register_operand" "%0, 0") + (match_operand:DI 2 "s_register_operand" "r, 0"))) + (clobber (reg:CC CC_REGNUM))] +- "TARGET_32BIT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK)" ++ "TARGET_32BIT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI)" + "#" + "TARGET_32BIT && reload_completed" + [(parallel [(set (reg:CC_C CC_REGNUM) +@@ -433,7 +433,7 @@ + (match_operand:SI 2 "s_register_operand" "r,r")) + (match_operand:DI 1 "s_register_operand" "r,0"))) + (clobber (reg:CC CC_REGNUM))] +- "TARGET_32BIT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK)" ++ "TARGET_32BIT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI)" + "#" + "TARGET_32BIT && reload_completed" + [(parallel [(set (reg:CC_C CC_REGNUM) +@@ -462,7 +462,7 @@ + (match_operand:SI 2 "s_register_operand" "r,r")) + (match_operand:DI 1 "s_register_operand" "r,0"))) + (clobber (reg:CC CC_REGNUM))] +- "TARGET_32BIT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK)" ++ "TARGET_32BIT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI)" + "#" + "TARGET_32BIT && reload_completed" + [(parallel [(set (reg:CC_C CC_REGNUM) +@@ -857,7 +857,7 @@ + (clobber (reg:CC CC_REGNUM))])] + "TARGET_EITHER" + " +- if (TARGET_HARD_FLOAT && TARGET_MAVERICK ++ if (TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI + && TARGET_32BIT + && cirrus_fp_register (operands[0], DImode) + && cirrus_fp_register (operands[1], DImode)) +@@ -2979,7 +2979,8 @@ + values to iwmmxt regs and back. */ + FAIL; + } +- else if (!TARGET_REALLY_IWMMXT && !(TARGET_HARD_FLOAT && TARGET_MAVERICK)) ++ else if (!TARGET_REALLY_IWMMXT ++ && !(TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI)) + FAIL; + " + ) +@@ -4544,7 +4545,8 @@ + [(set (match_operand:DI 0 "nonimmediate_di_operand" "=r, r, r, r, m") + (match_operand:DI 1 "di_operand" "rDa,Db,Dc,mi,r"))] + "TARGET_ARM +- && !(TARGET_HARD_FLOAT && (TARGET_MAVERICK || TARGET_VFP)) ++ && !(TARGET_HARD_FLOAT ++ && ((TARGET_MAVERICK && TARGET_CIRRUS_DI) || TARGET_VFP)) + && !TARGET_IWMMXT + && ( register_operand (operands[0], DImode) + || register_operand (operands[1], DImode))" +@@ -4664,7 +4666,7 @@ + [(set (match_operand:DI 0 "nonimmediate_operand" "=l,l,l,l,>,l, m,*r") + (match_operand:DI 1 "general_operand" "l, I,J,>,l,mi,l,*r"))] + "TARGET_THUMB1 +- && !(TARGET_HARD_FLOAT && TARGET_MAVERICK) ++ && !(TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI) + && ( register_operand (operands[0], DImode) + || register_operand (operands[1], DImode))" + "* +--- gcc-4.3.2/gcc/config/arm/cirrus.md.old 2009-03-10 12:13:10.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2009-03-10 12:32:00.000000000 +0000 +@@ -85,7 +85,7 @@ + [(set (match_operand:DI 0 "cirrus_fp_register" "=v") + (plus:DI (match_operand:DI 1 "cirrus_fp_register" "v") + (match_operand:DI 2 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfadd64%?\\t%V0, %V1, %V2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -126,7 +126,7 @@ + [(set (match_operand:DI 0 "cirrus_fp_register" "=v") + (minus:DI (match_operand:DI 1 "cirrus_fp_register" "v") + (match_operand:DI 2 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfsub64%?\\t%V0, %V1, %V2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -176,7 +176,7 @@ + [(set (match_operand:DI 0 "cirrus_fp_register" "=v") + (mult:DI (match_operand:DI 2 "cirrus_fp_register" "v") + (match_operand:DI 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfmul64%?\\t%V0, %V1, %V2" + [(set_attr "type" "fmul") + (set_attr "cirrus" "normal")] +@@ -261,7 +261,7 @@ + [(set (match_operand:DI 0 "cirrus_fp_register" "=v") + (ashift:DI (match_operand:DI 1 "cirrus_fp_register" "v") + (match_operand:SI 2 "register_operand" "r")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfrshl64%?\\t%V1, %V0, %s2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -271,7 +271,7 @@ + [(set (match_operand:DI 0 "cirrus_fp_register" "=v") + (ashift:DI (match_operand:DI 1 "cirrus_fp_register" "v") + (match_operand:SI 2 "cirrus_shift_const" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfsh64%?\\t%V0, %V1, #%s2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -281,7 +281,7 @@ + [(set (match_operand:DI 0 "cirrus_fp_register" "=v") + (ashiftrt:DI (match_operand:DI 1 "cirrus_fp_register" "v") + (match_operand:SI 2 "cirrus_shift_const" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfsh64%?\\t%V0, %V1, #-%s2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -290,7 +290,7 @@ + (define_insn "*cirrus_absdi2" + [(set (match_operand:DI 0 "cirrus_fp_register" "=v") + (abs:DI (match_operand:DI 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfabs64%?\\t%V0, %V1" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -301,7 +301,7 @@ + [(set (match_operand:DI 0 "cirrus_fp_register" "=v") + (neg:DI (match_operand:DI 1 "cirrus_fp_register" "v"))) + (clobber (reg:CC CC_REGNUM))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfneg64%?\\t%V0, %V1" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -392,7 +392,7 @@ + (define_insn "floatdisf2" + [(set (match_operand:SF 0 "cirrus_fp_register" "=v") + (float:SF (match_operand:DI 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfcvt64s%?\\t%V0, %V1" + [(set_attr "type" "f_cvt") + (set_attr "cirrus" "normal")] +@@ -401,7 +401,7 @@ + (define_insn "floatdidf2" + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") + (float:DF (match_operand:DI 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "cfcvt64d%?\\t%V0, %V1" + [(set_attr "type" "f_cvt") + (set_attr "cirrus" "normal")] +@@ -454,7 +454,7 @@ + (define_insn "*cirrus_arm_movdi" + [(set (match_operand:DI 0 "nonimmediate_di_operand" "=r,r,o<>,v,r,v,m,v") + (match_operand:DI 1 "di_operand" "rIK,mi,r,r,v,mi,v,v"))] +- "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK && TARGET_CIRRUS_DI" + "* + { + switch (which_alternative) +--- gcc-4.3.2/gcc/doc/invoke.texi.old 2009-03-10 17:17:19.000000000 +0000 ++++ gcc-4.3.2/gcc/doc/invoke.texi 2009-03-10 17:24:19.000000000 +0000 +@@ -429,6 +429,7 @@ + -msingle-pic-base -mno-single-pic-base @gol + -mpic-register=@var{reg} @gol + -mnop-fun-dllimport @gol ++-mirrus-di @gol + -mieee @gol + -mpoke-function-name @gol + -mthumb -marm @gol +@@ -8670,6 +8671,16 @@ + Specify the register to be used for PIC addressing. The default is R10 + unless stack-checking is enabled, when R9 is used. + ++@item -mcirrus-di ++When compiling for the Maverick FPU, enable handling of 64-bit integers ++in the FPU (add, subtract, multiply, arithmetic shifts and conversions). ++Normally they are disabled because some instruction sequences can give ++erroneous results. ++This option only has any effect if the ++@option{-mcpu=ep9312} @option{-mfpu=maverick} options have been used and is ++disabled by default. ++The default can be re-enabled by use of the @option{-mno-cirrus-di} switch. ++ + @item -mieee + When compiling for the Maverick FPU, disable the instructions that fail + to honor denormalized values. As these include floating point add, sub, diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-disable-cmpdi.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-disable-cmpdi.patch new file mode 100644 index 0000000000..7db1274ef9 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-disable-cmpdi.patch @@ -0,0 +1,29 @@ +Disable the Maverick's cmpdi instruction which cannot perform the simultaneous +signed/unsigned comparison expected by GCC. + +diff -ruN /home/hwilliams/openembedded/build/tmp/work/ep9312-angstrom-linux-gnueabi/gcc-cross-4.1.2-r0/gcc-4.1.2/gcc/config/arm/arm.md gcc-4.1.2/gcc/config/arm/arm.md +--- /home/hwilliams/openembedded/build/tmp/work/ep9312-angstrom-linux-gnueabi/gcc-cross-4.1.2-r0/gcc-4.1.2/gcc/config/arm/arm.md 2006-09-28 03:10:22.000000000 +1000 ++++ gcc-4.1.2/gcc/config/arm/arm.md 2007-05-15 09:53:21.000000000 +1000 +@@ -7354,10 +7366,12 @@ + ) + + ;; Cirrus DI compare instruction ++;; This is disabled and left go through ARM core registers, because currently ++;; Crunch coprocessor does only signed comparison. + (define_expand "cmpdi" + [(match_operand:DI 0 "cirrus_fp_register" "") + (match_operand:DI 1 "cirrus_fp_register" "")] +- "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK & 0" + "{ + arm_compare_op0 = operands[0]; + arm_compare_op1 = operands[1]; +@@ -7368,7 +7382,7 @@ + [(set (reg:CC CC_REGNUM) + (compare:CC (match_operand:DI 0 "cirrus_fp_register" "v") + (match_operand:DI 1 "cirrus_fp_register" "v")))] +- "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK & 0" + "cfcmp64%?\\tr15, %V0, %V1" + [(set_attr "type" "mav_farith") + (set_attr "cirrus" "compare")] diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-drop-thumb2.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-drop-thumb2.patch new file mode 100644 index 0000000000..2722e2d0d1 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-drop-thumb2.patch @@ -0,0 +1,98 @@ +MaverickCrunch FPUs only exist in silicon with an arm920t core and Cirrus have +stopped development of their ARM processors (1 April 2008, no joke!) + +This means Maverick-Thumb2 combinations will never exist in hardware, +so remove all existing Maverick+Thumb2 descriptions. + + Martin Guy <martinwguy@yahoo.it> November 2008 + +--- gcc-4.3.2/gcc/config/arm/cirrus.md.old 2008-11-18 12:09:40.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2008-11-18 12:12:38.000000000 +0000 +@@ -452,87 +452,3 @@ + (set_attr "neg_pool_range" " *, *, *, *, 1008, *, 1008, *, *, *") + (set_attr "cirrus" " not, not,not, not, not,normal,double,move,normal,double")] + ) +- +-(define_insn "*cirrus_thumb2_movdi" +- [(set (match_operand:DI 0 "nonimmediate_di_operand" "=r,r,o<>,v,r,v,m,v") +- (match_operand:DI 1 "di_operand" "rIK,mi,r,r,v,mi,v,v"))] +- "TARGET_THUMB2 && TARGET_HARD_FLOAT && TARGET_MAVERICK" +- "* +- { +- switch (which_alternative) +- { +- case 0: +- case 1: +- case 2: +- return (output_move_double (operands)); +- +- case 3: return \"cfmv64lr%?\\t%V0, %Q1\;cfmv64hr%?\\t%V0, %R1\"; +- case 4: return \"cfmvr64l%?\\t%Q0, %V1\;cfmvr64h%?\\t%R0, %V1\"; +- +- case 5: return \"cfldr64%?\\t%V0, %1\"; +- case 6: return \"cfstr64%?\\t%V1, %0\"; +- +- /* Shifting by 0 will just copy %1 into %0. */ +- case 7: return \"cfsh64%?\\t%V0, %V1, #0\"; +- +- default: abort (); +- } +- }" +- [(set_attr "length" " 8, 8, 8, 8, 8, 4, 4, 4") +- (set_attr "type" " *,load2,store2, *, *, load2,store2, *") +- (set_attr "pool_range" " *,4096, *, *, *, 1020, *, *") +- (set_attr "neg_pool_range" " *, 0, *, *, *, 1008, *, *") +- (set_attr "cirrus" "not, not, not,move,normal,double,double,normal")] +-) +- +-(define_insn "*thumb2_cirrus_movsf_hard_insn" +- [(set (match_operand:SF 0 "nonimmediate_operand" "=v,v,v,r,m,r,r,m") +- (match_operand:SF 1 "general_operand" "v,mE,r,v,v,r,mE,r"))] +- "TARGET_THUMB2 && TARGET_HARD_FLOAT && TARGET_MAVERICK +- && (GET_CODE (operands[0]) != MEM +- || register_operand (operands[1], SFmode))" +- "@ +- cfcpys%?\\t%V0, %V1 +- cfldrs%?\\t%V0, %1 +- cfmvsr%?\\t%V0, %1 +- cfmvrs%?\\t%0, %V1 +- cfstrs%?\\t%V1, %0 +- mov%?\\t%0, %1 +- ldr%?\\t%0, %1\\t%@ float +- str%?\\t%1, %0\\t%@ float" +- [(set_attr "length" " *, *, *, *, *, 4, 4, 4") +- (set_attr "type" " *, load1, *, *,store1, *,load1,store1") +- (set_attr "pool_range" " *, 1020, *, *, *, *,4096, *") +- (set_attr "neg_pool_range" " *, 1008, *, *, *, *, 0, *") +- (set_attr "cirrus" "normal,normal,move,normal,normal,not, not, not")] +-) +- +-(define_insn "*thumb2_cirrus_movdf_hard_insn" +- [(set (match_operand:DF 0 "nonimmediate_operand" "=r,Q,r,m,r,v,v,v,r,m") +- (match_operand:DF 1 "general_operand" "Q,r,r,r,mF,v,mF,r,v,v"))] +- "TARGET_THUMB2 +- && TARGET_HARD_FLOAT && TARGET_MAVERICK +- && (GET_CODE (operands[0]) != MEM +- || register_operand (operands[1], DFmode))" +- "* +- { +- switch (which_alternative) +- { +- case 0: return \"ldm%?ia\\t%m1, %M0\\t%@ double\"; +- case 1: return \"stm%?ia\\t%m0, %M1\\t%@ double\"; +- case 2: case 3: case 4: return output_move_double (operands); +- case 5: return \"cfcpyd%?\\t%V0, %V1\"; +- case 6: return \"cfldrd%?\\t%V0, %1\"; +- case 7: return \"cfmvdlr\\t%V0, %Q1\;cfmvdhr%?\\t%V0, %R1\"; +- case 8: return \"cfmvrdl%?\\t%Q0, %V1\;cfmvrdh%?\\t%R0, %V1\"; +- case 9: return \"cfstrd%?\\t%V1, %0\"; +- default: abort (); +- } +- }" +- [(set_attr "type" "load1,store2, *,store2,load1, *, load1, *, *,store2") +- (set_attr "length" " 4, 4, 8, 8, 8, 4, 4, 8, 8, 4") +- (set_attr "pool_range" " *, *, *, *,4092, *, 1020, *, *, *") +- (set_attr "neg_pool_range" " *, *, *, *, 0, *, 1008, *, *, *") +- (set_attr "cirrus" " not, not,not, not, not,normal,double,move,normal,double")] +-) +- diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-eabi-ieee754-endian-littleword-littlebyte.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-eabi-ieee754-endian-littleword-littlebyte.patch new file mode 100644 index 0000000000..f16336d05d --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-eabi-ieee754-endian-littleword-littlebyte.patch @@ -0,0 +1,15 @@ +Define Maverick floating point word order in libgcc's assemble support routines + +--- ../gcc-cross-4.1.2-r4-unpatched/gcc-4.1.2/gcc/config/arm/ieee754-df.S 2007-06-07 13:06:52.000000000 +1000 ++++ gcc-4.1.2/gcc/config/arm/ieee754-df.S 2008-04-07 13:15:49.000000000 +1000 +@@ -42,8 +42,9 @@ + + + @ For FPA, float words are always big-endian. ++@ For MAVERICK, float words are always little-endian. + @ For VFP, floats words follow the memory system mode. +-#if defined(__VFP_FP__) && !defined(__ARMEB__) ++#if ((defined(__VFP_FP__) && !defined(__ARMEB__)) || defined(__MAVERICK__)) + #define xl r0 + #define xh r1 + #define yl r2 diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-eabi-mvf0-scratch-ieee754.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-eabi-mvf0-scratch-ieee754.patch new file mode 100644 index 0000000000..72283f5381 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-eabi-mvf0-scratch-ieee754.patch @@ -0,0 +1,89 @@ +Don't try to copy results into an FPA register when compiling for Maverick + +diff -urN gcc-4.3.0/gcc/config/arm-original/arm/ieee754-df.S gcc-4.3.0/gcc/config/arm/ieee754-df.S +--- gcc-4.3.0/gcc/config/arm-original/arm/ieee754-df.S 2008-02-19 14:32:15.000000000 +1000 ++++ gcc-4.3.0/gcc/config/arm/ieee754-df.S 2008-04-10 16:38:45.000000000 +1000 +@@ -500,7 +500,7 @@ + ARM_FUNC_ALIAS aeabi_ul2d floatundidf + + orrs r2, r0, r1 +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + do_it eq, t + mvfeqd f0, #0.0 + #else +@@ -508,7 +508,7 @@ + #endif + RETc(eq) + +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + @ For hard FPA code we want to return via the tail below so that + @ we can return the result in f0 as well as in r0/r1 for backwards + @ compatibility. +@@ -526,7 +526,7 @@ + ARM_FUNC_ALIAS aeabi_l2d floatdidf + + orrs r2, r0, r1 +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + do_it eq, t + mvfeqd f0, #0.0 + #else +@@ -534,7 +534,7 @@ + #endif + RETc(eq) + +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + @ For hard FPA code we want to return via the tail below so that + @ we can return the result in f0 as well as in r0/r1 for backwards + @ compatibility. +@@ -586,7 +586,7 @@ + add r4, r4, r2 + b LSYM(Lad_p) + +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + + @ Legacy code expects the result to be returned in f0. Copy it + @ there as well. +diff -urN gcc-4.3.0/gcc/config/arm-original/arm/ieee754-sf.S gcc-4.3.0/gcc/config/arm/ieee754-sf.S +--- gcc-4.3.0/gcc/config/arm-original/arm/ieee754-sf.S 2008-02-19 14:32:15.000000000 +1000 ++++ gcc-4.3.0/gcc/config/arm/ieee754-sf.S 2008-04-10 16:39:15.000000000 +1000 +@@ -330,7 +330,7 @@ + ARM_FUNC_ALIAS aeabi_ul2f floatundisf + + orrs r2, r0, r1 +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + do_it eq, t + mvfeqs f0, #0.0 + #else +@@ -345,7 +345,7 @@ + ARM_FUNC_ALIAS aeabi_l2f floatdisf + + orrs r2, r0, r1 +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + do_it eq, t + mvfeqs f0, #0.0 + #else +@@ -363,7 +363,7 @@ + rsc ah, ah, #0 + #endif + 1: +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + @ For hard FPA code we want to return via the tail below so that + @ we can return the result in f0 as well as in r0 for backwards + @ compatibility. +@@ -432,7 +432,7 @@ + biceq r0, r0, ip, lsr #31 + RET + +-#if !defined (__VFP_FP__) && !defined(__SOFTFP__) ++#if !defined (__VFP_FP__) && !defined (__MAVERICK__) && !defined(__SOFTFP__) + + LSYM(f0_ret): + str r0, [sp, #-4]! diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fix-64bit-const-offsets.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fix-64bit-const-offsets.patch new file mode 100644 index 0000000000..e3d67013d4 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fix-64bit-const-offsets.patch @@ -0,0 +1,25 @@ +Fixup possible address offsets for constant double integers +also when using Maverick to handle 64-bit integers. + +--- gcc-4.3.2/gcc/config/arm/arm.c-original 2007-06-12 14:46:20.000000000 +1000 ++++ gcc-4.3.2/gcc/config/arm/arm.c 2007-06-12 14:48:06.000000000 +1000 +@@ -3815,7 +3815,8 @@ + + use_ldrd = (TARGET_LDRD + && (mode == DImode +- || (mode == DFmode && (TARGET_SOFT_FLOAT || TARGET_VFP)))); ++ || (mode == DFmode ++ && (TARGET_SOFT_FLOAT || TARGET_VFP || TARGET_MAVERICK)))); + + if (code == POST_INC || code == PRE_DEC + || ((code == PRE_INC || code == POST_DEC) +@@ -4424,7 +4424,8 @@ + /* VFP addressing modes actually allow greater offsets, but for + now we just stick with the lowest common denominator. */ + if (mode == DImode +- || ((TARGET_SOFT_FLOAT || TARGET_VFP) && mode == DFmode)) ++ || (mode == DFmode ++ && (TARGET_SOFT_FLOAT || TARGET_VFP || TARGET_MAVERICK))) + { + low_n = n & 0x0f; + n &= ~0x0f; diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fix-cirrus-reorg5.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fix-cirrus-reorg5.patch new file mode 100644 index 0000000000..313b7001bd --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fix-cirrus-reorg5.patch @@ -0,0 +1,313 @@ +This patch: +- maps branch-cirrus_insn to branch-nop-nop-cirrus_insn +- maps branch-noncirrus-cirrus to branch-noncirrus-nop-cirrus +- inserts a nop in load rN - load/store64 mvX,[rN] sequences to avoid an + undocumented hardware bug. +- always fixes up invalid code sequences when compiling hard Maverick insns + and removes the -mcirrus-fix-invalid-insns flag because chip development + has stopped and all existing silicon has these bugs, while the extra code + that claimed to do other things for the extra bugs in the old revision D0 + silicon was complete junk. +- Takes the cirrus checking out of the main arm_reorg loop, to remove the + speed penalty it caused when not compiling for Maverick. + + Martin Guy <martinwguy@yahoo.it> 3 March 2009 + +--- gcc-4.3.2/gcc/config/arm/arm.c.orig 2009-02-18 14:59:22.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.c 2009-03-10 09:32:31.000000000 +0000 +@@ -134,7 +134,7 @@ + static int arm_address_cost (rtx); + static bool arm_memory_load_p (rtx); + static bool arm_cirrus_insn_p (rtx); +-static void cirrus_reorg (rtx); ++static void cirrus_reorg (void); + static void arm_init_builtins (void); + static rtx arm_expand_builtin (tree, rtx, rtx, enum machine_mode, int); + static void arm_init_iwmmxt_builtins (void); +@@ -6580,122 +6580,122 @@ + + /* Cirrus reorg for invalid instruction combinations. */ + static void +-cirrus_reorg (rtx first) ++cirrus_reorg (void) + { +- enum attr_cirrus attr; +- rtx body = PATTERN (first); +- rtx t; +- int nops; +- +- /* Any branch must be followed by 2 non Cirrus instructions. */ +- if (GET_CODE (first) == JUMP_INSN && GET_CODE (body) != RETURN) +- { +- nops = 0; +- t = next_nonnote_insn (first); +- +- if (arm_cirrus_insn_p (t)) +- ++ nops; +- +- if (arm_cirrus_insn_p (next_nonnote_insn (t))) +- ++ nops; +- +- while (nops --) +- emit_insn_after (gen_nop (), first); +- +- return; +- } +- +- /* (float (blah)) is in parallel with a clobber. */ +- if (GET_CODE (body) == PARALLEL && XVECLEN (body, 0) > 0) +- body = XVECEXP (body, 0, 0); +- +- if (GET_CODE (body) == SET) +- { +- rtx lhs = XEXP (body, 0), rhs = XEXP (body, 1); +- +- /* cfldrd, cfldr64, cfstrd, cfstr64 must +- be followed by a non Cirrus insn. */ +- if (get_attr_cirrus (first) == CIRRUS_DOUBLE) +- { +- if (arm_cirrus_insn_p (next_nonnote_insn (first))) +- emit_insn_after (gen_nop (), first); ++ rtx insn, body; + +- return; +- } +- else if (arm_memory_load_p (first)) +- { +- unsigned int arm_regno; ++ /* Examine every instruction and see if it needs adjusting */ ++ for (insn = get_insns (); insn; insn = next_insn (insn)) ++ switch (GET_CODE (insn)) ++ { ++ case JUMP_INSN: ++ /* Any branch must be followed by 2 non Cirrus instructions. */ ++ body = PATTERN (insn); ++ if (GET_CODE (body) != RETURN) ++ { ++ rtx next = next_real_insn (insn); + +- /* Any ldr/cfmvdlr, ldr/cfmvdhr, ldr/cfmvsr, ldr/cfmv64lr, +- ldr/cfmv64hr combination where the Rd field is the same +- in both instructions must be split with a non Cirrus +- insn. Example: ++ if (arm_cirrus_insn_p (next)) ++ { ++ emit_insn_after (gen_nop (), insn); ++ emit_insn_after (gen_nop (), insn); ++ } ++ else ++ if (arm_cirrus_insn_p (next_real_insn (next))) ++ emit_insn_after (gen_nop (), next); ++ } ++ break; + ++ case INSN: ++ /* Any ldr/cfstrd combination where the Rd field is the same ++ in both instructions must be split with a non Cirrus insn. ++ Example: + ldr r0, blah + nop +- cfmvsr mvf0, r0. */ +- +- /* Get Arm register number for ldr insn. */ +- if (GET_CODE (lhs) == REG) +- arm_regno = REGNO (lhs); +- else +- { +- gcc_assert (GET_CODE (rhs) == REG); +- arm_regno = REGNO (rhs); +- } ++ cfstrd mvd0, [r0] ++ otherwise the FPU stores to random memory locations. ++ */ ++ body = PATTERN (insn); + +- /* Next insn. */ +- first = next_nonnote_insn (first); +- +- if (! arm_cirrus_insn_p (first)) +- return; ++ /* If first insn is ldr rN, <mem>... */ ++ if (GET_CODE (body) == SET && arm_memory_load_p (insn)) ++ { ++ rtx next = next_real_insn (insn); + +- body = PATTERN (first); ++ /* ...and second is cirrus double word load or store... */ ++ if (arm_cirrus_insn_p (next) ++ && get_attr_cirrus (next) == CIRRUS_DOUBLE) ++ { ++ rtx nextbody = PATTERN (next); ++ rtx ldr_target; /* destination of ldr insn: rN */ ++ rtx arm_part; /* src or dest espression involving [rN] */ ++ unsigned int arm_regno; /* the arm reg in the [rN] part */ + +- /* (float (blah)) is in parallel with a clobber. */ +- if (GET_CODE (body) == PARALLEL && XVECLEN (body, 0)) +- body = XVECEXP (body, 0, 0); +- +- if (GET_CODE (body) == FLOAT) +- body = XEXP (body, 0); +- +- if (get_attr_cirrus (first) == CIRRUS_MOVE +- && GET_CODE (XEXP (body, 1)) == REG +- && arm_regno == REGNO (XEXP (body, 1))) +- emit_insn_after (gen_nop (), first); ++ ldr_target = XEXP (body, 0); ++ gcc_assert (GET_CODE (ldr_target) == REG); + +- return; +- } +- } ++ gcc_assert (GET_CODE (nextbody) == SET); + +- /* get_attr cannot accept USE or CLOBBER. */ +- if (!first +- || GET_CODE (first) != INSN +- || GET_CODE (PATTERN (first)) == USE +- || GET_CODE (PATTERN (first)) == CLOBBER) +- return; ++ /* Find the load or store address of the insn */ ++ switch (GET_CODE (XEXP (nextbody, 0))) ++ { ++ case MEM: /* it's cfstrd/64 */ ++ gcc_assert (GET_CODE (XEXP (nextbody, 1)) == REG); ++ arm_part = XEXP (XEXP (nextbody, 0), 0); ++ break; + +- attr = get_attr_cirrus (first); ++ case REG: /* it's cfldrd/64 */ ++ if (GET_CODE (XEXP (nextbody, 1)) == MEM) ++ arm_part = XEXP (XEXP (nextbody, 1), 0); ++ else ++ /* It can also be const_double or const_int, which will ++ * turn into harmless [pc, #offset] in arm_reorg() */ ++ continue; ++ break; + +- /* Any coprocessor compare instruction (cfcmps, cfcmpd, ...) +- must be followed by a non-coprocessor instruction. */ +- if (attr == CIRRUS_COMPARE) +- { +- nops = 0; ++ default: ++ gcc_unreachable (); ++ } + +- t = next_nonnote_insn (first); ++ /* Find the arm register number in the [rN] expression */ ++ arm_regno = 0; /* none */ ++ switch (GET_CODE (arm_part)) ++ { ++ case REG: /* it's [rN] */ ++ arm_regno = REGNO (arm_part); ++ break; + +- if (arm_cirrus_insn_p (t)) +- ++ nops; ++ case PLUS: /* it's [rN, #XXX] or [rN, -#YYY]. */ ++ if (GET_CODE (XEXP (arm_part, 0)) == REG) ++ arm_regno = REGNO (XEXP (arm_part, 0)); /* usual case */ ++ else if (GET_CODE (XEXP (arm_part, 1)) == REG) ++ arm_regno = REGNO (XEXP (arm_part, 1)); /* inverted */ ++ else ++ gcc_unreachable(); ++ break; + +- if (arm_cirrus_insn_p (next_nonnote_insn (t))) +- ++ nops; ++ case PRE_INC: ++ case POST_INC: ++ case PRE_DEC: ++ case POST_DEC: ++ gcc_assert (GET_CODE (XEXP (arm_part, 0)) == REG); ++ arm_regno = REGNO (XEXP (arm_part, 0)); ++ break; + +- while (nops --) +- emit_insn_after (gen_nop (), first); ++ default: ++ /* Do nothing */ ++ continue; ++ } + +- return; +- } ++ if (arm_regno == REGNO (ldr_target)) ++ emit_insn_after (gen_nop (), insn); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } + } + + /* Return TRUE if X references a SYMBOL_REF. */ +@@ -9293,6 +9296,10 @@ + + minipool_fix_head = minipool_fix_tail = NULL; + ++ /* Do cirrus_reorg() first as it may insert extra instructions */ ++ if (TARGET_MAVERICK && TARGET_HARD_FLOAT) ++ cirrus_reorg (); ++ + /* The first insn must always be a note, or the code below won't + scan it properly. */ + insn = get_insns (); +@@ -9302,12 +9309,6 @@ + /* Scan all the insns and record the operands that will need fixing. */ + for (insn = next_nonnote_insn (insn); insn; insn = next_nonnote_insn (insn)) + { +- if (TARGET_CIRRUS_FIX_INVALID_INSNS +- && (arm_cirrus_insn_p (insn) +- || GET_CODE (insn) == JUMP_INSN +- || arm_memory_load_p (insn))) +- cirrus_reorg (insn); +- + if (GET_CODE (insn) == BARRIER) + push_minipool_barrier (insn, address); + else if (INSN_P (insn)) +--- gcc-4.3.2/gcc/config/arm/arm.opt.orig 2009-03-02 10:17:08.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.opt 2009-03-02 10:27:30.000000000 +0000 +@@ -63,10 +63,6 @@ + Target Report Mask(CALLER_INTERWORKING) + Thumb: Assume function pointers may go to non-Thumb aware code + +-mcirrus-fix-invalid-insns +-Target Report Mask(CIRRUS_FIX_INVALID_INSNS) +-Cirrus: Place NOPs to avoid invalid instruction combinations +- + mcpu= + Target RejectNegative Joined + Specify the name of the target CPU +--- gcc-4.3.2/gcc/doc/invoke.texi.old 2008-12-04 11:48:54.000000000 +0000 ++++ gcc-4.3.2/gcc/doc/invoke.texi 2009-03-02 10:26:45.000000000 +0000 +@@ -429,7 +429,6 @@ + -msingle-pic-base -mno-single-pic-base @gol + -mpic-register=@var{reg} @gol + -mnop-fun-dllimport @gol +--mcirrus-fix-invalid-insns -mno-cirrus-fix-invalid-insns @gol + -mieee @gol + -mpoke-function-name @gol + -mthumb -marm @gol +@@ -8671,18 +8671,6 @@ + Specify the register to be used for PIC addressing. The default is R10 + unless stack-checking is enabled, when R9 is used. + +-@item -mcirrus-fix-invalid-insns +-@opindex mcirrus-fix-invalid-insns +-@opindex mno-cirrus-fix-invalid-insns +-Insert NOPs into the instruction stream to in order to work around +-problems with invalid Maverick instruction combinations. This option +-is only valid if the @option{-mcpu=ep9312} option has been used to +-enable generation of instructions for the Cirrus Maverick floating +-point co-processor. This option is not enabled by default, since the +-problem is only present in older Maverick implementations. The default +-can be re-enabled by use of the @option{-mno-cirrus-fix-invalid-insns} +-switch. +- + @item -mieee + When compiling for the Maverick FPU, disable the instructions that fail + to honor denormalized values. As these include floating point add, sub, diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-floatsi-no-scratch.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-floatsi-no-scratch.patch new file mode 100644 index 0000000000..d5eaa89152 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-floatsi-no-scratch.patch @@ -0,0 +1,35 @@ +When converting from 32-bit integers (in ARM registers) to single and double +precision floating points (in Maverick registers), transfer the 32-bit value +straight to the destination register and convert it in place there, +instead of pointlessly using an extra Maverick register. + + Martin Guy <martinwguy@yahoo.it> 15 Nov 2008 + +--- gcc-4.3.2/gcc/config/arm/cirrus.md.old 2008-11-15 18:17:52.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2008-11-15 18:24:41.000000000 +0000 +@@ -300,10 +300,9 @@ + ;; Convert Cirrus-SI to Cirrus-SF + (define_insn "cirrus_floatsisf2" + [(set (match_operand:SF 0 "cirrus_fp_register" "=v") +- (float:SF (match_operand:SI 1 "s_register_operand" "r"))) ++ (float:SF (match_operand:SI 1 "s_register_operand" "r")))] +- (clobber (match_scratch:DF 2 "=v"))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" +- "cfmv64lr%?\\t%Z2, %1\;cfcvt32s%?\\t%V0, %Y2" ++ "cfmv64lr%?\\t%Z0, %1\;cfcvt32s%?\\t%V0, %Y0" + [(set_attr "length" "8") + (set_attr "cirrus" "move")] + ) +@@ -310,10 +309,9 @@ + + (define_insn "cirrus_floatsidf2" + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") +- (float:DF (match_operand:SI 1 "s_register_operand" "r"))) ++ (float:DF (match_operand:SI 1 "s_register_operand" "r")))] +- (clobber (match_scratch:DF 2 "=v"))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" +- "cfmv64lr%?\\t%Z2, %1\;cfcvt32d%?\\t%V0, %Y2" ++ "cfmv64lr%?\\t%Z0, %1\;cfcvt32d%?\\t%V0, %Y0" + [(set_attr "length" "8") + (set_attr "cirrus" "move")] + ) diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fp_consts.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fp_consts.patch new file mode 100644 index 0000000000..0bc886bd99 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-fp_consts.patch @@ -0,0 +1,15 @@ +Maverick does not have immediate FP constants. + +--- gcc-4.3.2/gcc/config/arm/arm.c-original 2007-06-12 16:17:14.000000000 +1000 ++++ gcc-4.3.2/gcc/config/arm/arm.c 2007-06-12 16:17:28.000000000 +1000 +@@ -5699,7 +5699,9 @@ + int i; + REAL_VALUE_TYPE r; + ++ if (TARGET_MAVERICK) ++ fp_consts_inited = 0; +- if (TARGET_VFP) ++ else if (TARGET_VFP) + fp_consts_inited = 1; + else + fp_consts_inited = 8; diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-mieee.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-mieee.patch new file mode 100644 index 0000000000..793f52506d --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-mieee.patch @@ -0,0 +1,267 @@ +This patch adds an -mieee flag to GCC for ARM, that only has any effect when +hard MaverickCrunch FPU code generation is selected. +It disables the buggy instructions that do not recognise or do not generate +denormalized values when they should: + add, sub, neg, abs and float<->double conversions. +That leaves only floating point multiplication, comparison, conversions to/from +integers and the 64-bit integer operations. + + Martin Guy <martinwguy@yahoo.it>, December 2008 + +--- gcc-4.3.2/gcc/doc/invoke.texi.old 2008-06-25 02:37:53.000000000 +0100 ++++ gcc-4.3.2/gcc/doc/invoke.texi 2008-12-04 11:48:54.000000000 +0000 +@@ -430,6 +430,7 @@ + -mpic-register=@var{reg} @gol + -mnop-fun-dllimport @gol + -mcirrus-fix-invalid-insns -mno-cirrus-fix-invalid-insns @gol ++-mieee @gol + -mpoke-function-name @gol + -mthumb -marm @gol + -mtpcs-frame -mtpcs-leaf-frame @gol +@@ -8682,6 +8683,15 @@ + can be re-enabled by use of the @option{-mno-cirrus-fix-invalid-insns} + switch. + ++@item -mieee ++When compiling for the Maverick FPU, disable the instructions that fail ++to honor denormalized values. As these include floating point add, sub, ++neg, abs and float<->double conversions, it incurs a severe speed penalty. ++This option only has an effect if the ++@option{-mcpu=ep9312} @option{-mfpu=maverick} options have been used and is ++disabled by default. ++The default can be re-enabled by use of the @option{-mno-ieee} switch. ++ + @item -mpoke-function-name + @opindex mpoke-function-name + Write the name of each function into the text section, directly +--- gcc-4.3.2/gcc/config/arm/arm.opt.old 2007-08-02 11:49:31.000000000 +0100 ++++ gcc-4.3.2/gcc/config/arm/arm.opt 2008-12-04 11:42:50.000000000 +0000 +@@ -93,6 +93,10 @@ + Target RejectNegative + Alias for -mfloat-abi=hard + ++mieee ++Target Report Mask(IEEE) ++Cirrus: Enable denormalized values by disabling buggy Maverick instructions ++ + mlittle-endian + Target Report RejectNegative InverseMask(BIG_END) + Assume target CPU is configured as little endian +--- gcc-4.3.2/gcc/config/arm/arm.c.old 2008-11-21 19:09:18.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.c 2008-12-03 12:03:31.000000000 +0000 +@@ -902,6 +902,10 @@ + target_float_abi_name = "hard"; + return true; + ++ case OPT_mieee: ++ target_flags |= MASK_IEEE; ++ return true; ++ + case OPT_msoft_float: + target_float_abi_name = "soft"; + return true; +--- gcc-4.3.2/gcc/config/arm/arm.md.old 2008-12-03 15:29:38.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.md 2008-12-04 12:14:56.000000000 +0000 +@@ -831,7 +831,7 @@ + [(set (match_operand:SF 0 "s_register_operand" "") + (plus:SF (match_operand:SF 1 "s_register_operand" "") + (match_operand:SF 2 "arm_float_add_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && !(TARGET_MAVERICK && TARGET_IEEE)" + " + if (TARGET_MAVERICK + && !cirrus_fp_register (operands[2], SFmode)) +@@ -842,7 +842,7 @@ + [(set (match_operand:DF 0 "s_register_operand" "") + (plus:DF (match_operand:DF 1 "s_register_operand" "") + (match_operand:DF 2 "arm_float_add_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && !(TARGET_MAVERICK && TARGET_IEEE)" + " + if (TARGET_MAVERICK + && !cirrus_fp_register (operands[2], DFmode)) +@@ -1064,7 +1064,7 @@ + [(set (match_operand:SF 0 "s_register_operand" "") + (minus:SF (match_operand:SF 1 "arm_float_rhs_operand" "") + (match_operand:SF 2 "arm_float_rhs_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && !(TARGET_MAVERICK && TARGET_IEEE)" + " + if (TARGET_MAVERICK) + { +@@ -1079,7 +1079,7 @@ + [(set (match_operand:DF 0 "s_register_operand" "") + (minus:DF (match_operand:DF 1 "arm_float_rhs_operand" "") + (match_operand:DF 2 "arm_float_rhs_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && !(TARGET_MAVERICK && TARGET_IEEE)" + " + if (TARGET_MAVERICK) + { +@@ -3367,7 +3367,7 @@ + (neg:SF (match_operand:SF 1 "s_register_operand" "")))] + "TARGET_32BIT && TARGET_HARD_FLOAT + && (TARGET_FPA || TARGET_VFP +- || (TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS(SFmode))" ++ || (TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS(SFmode) && ! TARGET_IEEE))" + "" + ) + +@@ -3376,7 +3376,7 @@ + (neg:DF (match_operand:DF 1 "s_register_operand" "")))] + "TARGET_32BIT && TARGET_HARD_FLOAT + && (TARGET_FPA || TARGET_VFP +- || (TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS(DFmode))" ++ || (TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS(DFmode) && ! TARGET_IEEE))" + "") + + ;; abssi2 doesn't really clobber the condition codes if a different register +@@ -3456,13 +3456,13 @@ + (define_expand "abssf2" + [(set (match_operand:SF 0 "s_register_operand" "") + (abs:SF (match_operand:SF 1 "s_register_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && !(TARGET_MAVERICK && TARGET_IEEE)" + "") + + (define_expand "absdf2" + [(set (match_operand:DF 0 "s_register_operand" "") + (abs:DF (match_operand:DF 1 "s_register_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && !(TARGET_MAVERICK && TARGET_IEEE)" + "") + + (define_expand "sqrtsf2" +@@ -3600,7 +3600,7 @@ + [(set (match_operand:SF 0 "s_register_operand" "") + (float_truncate:SF + (match_operand:DF 1 "s_register_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && !(TARGET_MAVERICK && TARGET_IEEE)" + "" + ) + +@@ -4462,7 +4462,7 @@ + (define_expand "extendsfdf2" + [(set (match_operand:DF 0 "s_register_operand" "") + (float_extend:DF (match_operand:SF 1 "s_register_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && !(TARGET_MAVERICK && TARGET_IEEE)" + "" + ) + +--- gcc-4.3.2/gcc/config/arm/cirrus.md.old 2008-12-03 12:13:08.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2008-12-04 14:01:59.000000000 +0000 +@@ -101,11 +101,12 @@ + (set_attr "cirrus" "normal")] + ) + ++; Cirrus hardware bug: denormalized values on input are truncated to zero + (define_insn "*cirrus_addsf3" + [(set (match_operand:SF 0 "cirrus_fp_register" "=v") + (plus:SF (match_operand:SF 1 "cirrus_fp_register" "v") + (match_operand:SF 2 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! TARGET_IEEE" + "cfadds%?\\t%V0, %V1, %V2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -115,7 +116,7 @@ + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") + (plus:DF (match_operand:DF 1 "cirrus_fp_register" "v") + (match_operand:DF 2 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! TARGET_IEEE" + "cfaddd%?\\t%V0, %V1, %V2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -145,7 +146,7 @@ + [(set (match_operand:SF 0 "cirrus_fp_register" "=v") + (minus:SF (match_operand:SF 1 "cirrus_fp_register" "v") + (match_operand:SF 2 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! TARGET_IEEE" + "cfsubs%?\\t%V0, %V1, %V2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -155,7 +156,7 @@ + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") + (minus:DF (match_operand:DF 1 "cirrus_fp_register" "v") + (match_operand:DF 2 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! TARGET_IEEE" + "cfsubd%?\\t%V0, %V1, %V2" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -316,10 +317,12 @@ + ) + + ; Cirrus hardware bug: neg 0 -> 0 instead of -0 ++; Cirrus hardware bug: denormalized values on input are truncated to zero + (define_insn "*cirrus_negsf2" + [(set (match_operand:SF 0 "cirrus_fp_register" "=v") + (neg:SF (match_operand:SF 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS (SFmode)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK ++ && ! HONOR_SIGNED_ZEROS (SFmode) && ! TARGET_IEEE" + "cfnegs%?\\t%V0, %V1" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -328,7 +331,8 @@ + (define_insn "*cirrus_negdf2" + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") + (neg:DF (match_operand:DF 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS (DFmode)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK ++ && ! HONOR_SIGNED_ZEROS (DFmode) && ! TARGET_IEEE" + "cfnegd%?\\t%V0, %V1" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -345,10 +349,11 @@ + (set_attr "cirrus" "normal")] + ) + ++; Cirrus hardware bug: denormalized values on input are truncated to zero + (define_insn "*cirrus_abssf2" + [(set (match_operand:SF 0 "cirrus_fp_register" "=v") + (abs:SF (match_operand:SF 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! TARGET_IEEE" + "cfabss%?\\t%V0, %V1" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -357,7 +362,7 @@ + (define_insn "*cirrus_absdf2" + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") + (abs:DF (match_operand:DF 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! TARGET_IEEE" + "cfabsd%?\\t%V0, %V1" + [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] +@@ -423,20 +428,23 @@ + (set_attr "length" "8")] + ) + ++; Cirrus hardware bugs: denormalized values on input are truncated to zero ++; and double-to-single float never produces denormalized values. + (define_insn "*cirrus_truncdfsf2" + [(set (match_operand:SF 0 "cirrus_fp_register" "=v") + (float_truncate:SF + (match_operand:DF 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! TARGET_IEEE" + "cfcvtds%?\\t%V0, %V1" + [(set_attr "type" "f_cvt") + (set_attr "cirrus" "normal")] + ) + ++; Cirrus hardware bug: denormalized values on input are truncated to zero + (define_insn "*cirrus_extendsfdf2" + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") + (float_extend:DF (match_operand:SF 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! TARGET_IEEE" + "cfcvtsd%?\\t%V0, %V1" + [(set_attr "type" "f_cvt") + (set_attr "cirrus" "normal")] diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-movsf-movdf-Uy.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-movsf-movdf-Uy.patch new file mode 100644 index 0000000000..b0cd7f84eb --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-movsf-movdf-Uy.patch @@ -0,0 +1,65 @@ +This is a rewriting of the OE patch of the same name. + +The OE patch is different to this in that it: +- reorders the constraints (we keep them in the same order) +- its definition of attr "type" seem not to correspond to the insns it uses + (so here we define them to what seems right) +- in movdf, it replaces operand 1 "general_operand" with "soft_df_operand" and + removes the first two clauses (r<->Q = memory indexed by base register) + +--- gcc-4.3.2/gcc/config/arm/cirrus.md.old 2008-11-15 18:46:25.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2008-11-18 11:51:52.000000000 +0000 +@@ -403,8 +403,8 @@ + ;; on HARD_REGNO_MODE_OK. + + (define_insn "*cirrus_movsf_hard_insn" +- [(set (match_operand:SF 0 "nonimmediate_operand" "=v,v,v,r,m,r,r,m") +- (match_operand:SF 1 "general_operand" "v,mE,r,v,v,r,mE,r"))] ++ [(set (match_operand:SF 0 "nonimmediate_operand" "=v,v ,v,r,Uy,r,r,m") ++ (match_operand:SF 1 "general_operand" "v,UyE,r,v,v ,r,mE,r"))] + "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK + && (GET_CODE (operands[0]) != MEM + || register_operand (operands[1], SFmode))" +@@ -414,19 +414,18 @@ + cfmvsr%?\\t%V0, %1 + cfmvrs%?\\t%0, %V1 + cfstrs%?\\t%V1, %0 +- mov%?\\t%0, %1 ++ mov%?\\t%0, %1\\t%@ float + ldr%?\\t%0, %1\\t%@ float + str%?\\t%1, %0\\t%@ float" +- [(set_attr "length" " *, *, *, *, *, 4, 4, 4") +- (set_attr "type" " *, load1, *, *,store1, *,load1,store1") +- (set_attr "pool_range" " *, 1020, *, *, *, *,4096, *") +- (set_attr "neg_pool_range" " *, 1008, *, *, *, *,4084, *") ++ [(set_attr "type" "ffarith,f_loads,r_2_f,f_2_r,f_stores,*,load1,store1") ++ (set_attr "pool_range" " *, 1020, *, *, *, *,4096, *") ++ (set_attr "neg_pool_range" " *, 1008, *, *, *, *,4080, *") + (set_attr "cirrus" "normal,normal,move,normal,normal,not, not, not")] + ) + + (define_insn "*cirrus_movdf_hard_insn" +- [(set (match_operand:DF 0 "nonimmediate_operand" "=r,Q,r,m,r,v,v,v,r,m") +- (match_operand:DF 1 "general_operand" "Q,r,r,r,mF,v,mF,r,v,v"))] ++ [(set (match_operand:DF 0 "nonimmediate_operand" "=r,Q,r,m,r ,v,v ,v,r,Uy") ++ (match_operand:DF 1 "general_operand" "Q,r,r,r,mF,v,UyF,r,v,v"))] + "TARGET_ARM + && TARGET_HARD_FLOAT && TARGET_MAVERICK + && (GET_CODE (operands[0]) != MEM +@@ -447,11 +446,11 @@ + default: gcc_unreachable (); + } + }" +- [(set_attr "type" "load1,store2, *,store2,load1, *, load1, *, *,store2") +- (set_attr "length" " 4, 4, 8, 8, 8, 4, 4, 8, 8, 4") +- (set_attr "pool_range" " *, *, *, *, 252, *, 1020, *, *, *") +- (set_attr "neg_pool_range" " *, *, *, *, 244, *, 1008, *, *, *") +- (set_attr "cirrus" " not, not,not, not, not,normal,double,move,normal,double")] ++ [(set_attr "type" "load2,store2, *,store2,load2,ffarith,f_loadd,r_2_f,f_2_r,store2") ++ (set_attr "length" " 4, 4, 8, 8, 8, 4, 4, 8, 8, 4") ++ (set_attr "pool_range" " *, *, *, *, 1020, *, 1020, *, *, *") ++ (set_attr "neg_pool_range" " *, *, *, *, 1008, *, 1008, *, *, *") ++ (set_attr "cirrus" " not, not,not, not, not,normal,double,move,normal,double")] + ) + + (define_insn "*cirrus_thumb2_movdi" diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-neg-enable.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-neg-enable.patch new file mode 100644 index 0000000000..d675407435 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-neg-enable.patch @@ -0,0 +1,31 @@ +In arm.md, enable expansion for neg[sd]f for Maverick - the instructions are +already already defined in cirrus.md + +Without this patch for some reason it still manages to produce cfnegd +instructions but not cfnegs, presumably via some optimization path. + + Martin Guy <martinwguy@yahoo.it> December 2008 + +--- gcc-4.3.2/gcc/config/arm/arm.md.old 2008-12-03 15:22:43.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.md 2008-12-03 15:29:38.000000000 +0000 +@@ -3366,14 +3366,18 @@ + (define_expand "negsf2" + [(set (match_operand:SF 0 "s_register_operand" "") + (neg:SF (match_operand:SF 1 "s_register_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP ++ || (TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS(SFmode))" + "" + ) + + (define_expand "negdf2" + [(set (match_operand:DF 0 "s_register_operand" "") + (neg:DF (match_operand:DF 1 "s_register_operand" "")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && (TARGET_FPA || TARGET_VFP)" ++ "TARGET_32BIT && TARGET_HARD_FLOAT ++ && (TARGET_FPA || TARGET_VFP ++ || (TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS(DFmode))" + "") + + ;; abssi2 doesn't really clobber the condition codes if a different register diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-neg-protect.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-neg-protect.patch new file mode 100644 index 0000000000..63d3090e94 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-neg-protect.patch @@ -0,0 +1,33 @@ +The Crunch cfnegs and cfnegd instructions have a hardware bug in all silicon +revisions (D0 to E2) whereby neg(0) returns 0 (not -0). See erratum 12. + +For ieee-correctness, and to pass another case in GCC's IEEE testsuite, +we disable the instruction and do it in software unless +-funsafe-math-optimizations (included in -ffast-math) is given. + + Martin Guy <martinwguy@yahoo.it>, September 2008 + +--- gcc-4.3.2/gcc/config/arm/cirrus.md-original 2007-06-12 17:01:24.000000000 +1000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2007-06-12 17:03:26.000000000 +1000 +@@ -254,18 +254,19 @@ + [(set_attr "cirrus" "normal")] + ) + ++; Cirrus hardware bug: neg 0 -> 0 instead of -0 + (define_insn "*cirrus_negsf2" + [(set (match_operand:SF 0 "cirrus_fp_register" "=v") + (neg:SF (match_operand:SF 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS (SFmode)" + "cfnegs%?\\t%V0, %V1" + [(set_attr "cirrus" "normal")] + ) + + (define_insn "*cirrus_negdf2" + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") + (neg:DF (match_operand:DF 1 "cirrus_fp_register" "v")))] +- "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" ++ "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS (DFmode)" + "cfnegd%?\\t%V0, %V1" + [(set_attr "cirrus" "normal")] + ) diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-pipeline.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-pipeline.patch new file mode 100644 index 0000000000..a6ae3f6a29 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-pipeline.patch @@ -0,0 +1,461 @@ +Patch to add description of MaverickCrunch pipelines. + +This increases the speed as measured by the fftw benchmark from +5.4 to 5.8 mflops and reduced LAME's execution time from 2m30 to 2m20. + +I don't know who wrote this - I got it from Hasjim Williams. + + -martinwguy + +--- gcc-4.3.2/gcc/config/arm/arm.md.old 2008-11-21 19:06:18.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.md 2008-11-21 19:06:37.000000000 +0000 +@@ -230,13 +230,10 @@ + ; store2 store 2 words + ; store3 store 3 words + ; store4 store 4 (or more) words +-; Additions for Cirrus Maverick co-processor: +-; mav_farith Floating point arithmetic (4 cycle) +-; mav_dmult Double multiplies (7 cycle) + ; + + (define_attr "type" +- "alu,alu_shift,alu_shift_reg,mult,block,float,fdivx,fdivd,fdivs,fmul,fmuls,fmuld,fmacs,fmacd,ffmul,farith,ffarith,f_flag,float_em,f_load,f_store,f_loads,f_loadd,f_stores,f_stored,f_mem_r,r_mem_f,f_2_r,r_2_f,f_cvt,branch,call,load_byte,load1,load2,load3,load4,store1,store2,store3,store4,mav_farith,mav_dmult" ++ "alu,alu_shift,alu_shift_reg,mult,block,float,fdivx,fdivd,fdivs,fmul,fmuls,fmuld,fmacs,fmacd,ffmul,farith,ffarith,f_flag,float_em,f_load,f_store,f_loads,f_loadd,f_stores,f_stored,f_mem_r,r_mem_f,f_2_r,r_2_f,f_cvt,branch,call,load_byte,load1,load2,load3,load4,store1,store2,store3,store4" + (if_then_else + (eq_attr "insn" "smulxy,smlaxy,smlalxy,smulwy,smlawx,mul,muls,mla,mlas,umull,umulls,umlal,umlals,smull,smulls,smlal,smlals") + (const_string "mult") +@@ -7340,7 +7337,7 @@ + (match_operand:SF 1 "cirrus_fp_register" "v")))] + "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfcmps%?\\tr15, %V0, %V1" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "compare")] + ) + +@@ -7351,7 +7348,7 @@ + (match_operand:DF 1 "cirrus_fp_register" "v")))] + "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfcmpd%?\\tr15, %V0, %V1" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "compare")] + ) + +@@ -7374,7 +7371,7 @@ + (match_operand:DI 1 "cirrus_fp_register" "v")))] + "TARGET_ARM && TARGET_HARD_FLOAT && TARGET_MAVERICK & 0" + "cfcmp64%?\\tr15, %V0, %V1" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "compare")] + ) + +--- gcc-4.3.2/gcc/config/arm/cirrus.md.old 2008-11-21 14:25:50.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/cirrus.md 2008-11-21 14:42:01.000000000 +0000 +@@ -19,6 +19,58 @@ + ;; along with GCC; see the file COPYING3. If not see + ;; <http://www.gnu.org/licenses/>. + ++;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ++;; Pipeline description ++;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ++ ++(define_automaton "crunch") ++ ++;; There are 2 pipelines in the CRUNCH unit. ++;; ++;; - A 8/9-stage? FMAC pipeline (7/8? execute + writeback) ++;; ++;; - A 4-stage LS pipeline (execute + 2 memory + writeback) with forward from ++;; second memory stage for loads. ++ ++(define_cpu_unit "crunch_fmac" "crunch") ++ ++(define_cpu_unit "crunch_ls" "crunch") ++ ++;; The CRUNCH "type" attributes differ from those used in the FPA and VFP model. ++;; ffarith Fast floating point insns. ++;; farith Most arithmetic insns. ++;; fmul Double precision multiply. ++;; f_load[sd] Floating point load from memory. ++;; f_store[sd] Floating point store to memory. ++;; f_2_r Transfer crunch to arm reg. ++;; r_2_f Transfer arm to crunch reg. ++;; f_cvt Convert floating<->integral ++ ++(define_insn_reservation "crunch_ffarith" 18 ++ (and (eq_attr "fpu" "maverick") ++ (eq_attr "type" "ffarith")) ++ "crunch_fmac") ++ ++(define_insn_reservation "crunch_farith" 18 ++ (and (eq_attr "fpu" "maverick") ++ (eq_attr "type" "farith,f_cvt")) ++ "crunch_fmac") ++ ++(define_insn_reservation "crunch_fmul" 30 ++ (and (eq_attr "fpu" "maverick") ++ (eq_attr "type" "fmul")) ++ "crunch_fmac*2") ++ ++;; Moves to/from arm regs also use the load/store pipeline. ++(define_insn_reservation "crunch_fload" 8 ++ (and (eq_attr "fpu" "maverick") ++ (eq_attr "type" "f_loads,f_loadd,r_2_f")) ++ "crunch_ls") ++ ++(define_insn_reservation "crunch_fstore" 8 ++ (and (eq_attr "fpu" "maverick") ++ (eq_attr "type" "f_stores,f_stored,f_2_r")) ++ "crunch_ls") + + ; Cirrus types for invalid insn combinations + ; not Not a cirrus insn +@@ -35,7 +87,7 @@ + (match_operand:DI 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfadd64%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -45,7 +97,7 @@ + (match_operand:SI 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfadd32%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -55,7 +107,7 @@ + (match_operand:SF 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfadds%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -65,7 +117,7 @@ + (match_operand:DF 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfaddd%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -75,7 +127,7 @@ + (match_operand:DI 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfsub64%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -85,7 +137,7 @@ + (match_operand:SI 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfsub32%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -95,7 +147,7 @@ + (match_operand:SF 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfsubs%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -105,7 +157,7 @@ + (match_operand:DF 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfsubd%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -115,7 +167,7 @@ + (match_operand:SI 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfmul32%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -125,7 +177,7 @@ + (match_operand:DI 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfmul64%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_dmult") ++ [(set_attr "type" "fmul") + (set_attr "cirrus" "normal")] + ) + +@@ -137,7 +189,7 @@ + (match_operand:SI 3 "cirrus_fp_register" "0")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfmac32%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -150,7 +202,7 @@ + (match_operand:SI 3 "cirrus_fp_register" "v"))))] + "0 && TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfmsc32%?\\t%V0, %V2, %V3" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -160,7 +212,7 @@ + (match_operand:SF 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfmuls%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_farith") ++ [(set_attr "type" "farith") + (set_attr "cirrus" "normal")] + ) + +@@ -170,7 +222,7 @@ + (match_operand:DF 2 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfmuld%?\\t%V0, %V1, %V2" +- [(set_attr "type" "mav_dmult") ++ [(set_attr "type" "fmul") + (set_attr "cirrus" "normal")] + ) + +@@ -180,7 +232,8 @@ + (match_operand:SI 2 "cirrus_shift_const" "")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfsh32%?\\t%V0, %V1, #%s2" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "cirrus_ashiftrt_const" +@@ -189,7 +242,8 @@ + (match_operand:SI 2 "cirrus_shift_const" "")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfsh32%?\\t%V0, %V1, #-%s2" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "cirrus_ashlsi3" +@@ -198,7 +252,8 @@ + (match_operand:SI 2 "register_operand" "r")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfrshl32%?\\t%V1, %V0, %s2" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "ashldi3_cirrus" +@@ -207,7 +262,8 @@ + (match_operand:SI 2 "register_operand" "r")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfrshl64%?\\t%V1, %V0, %s2" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "cirrus_ashldi_const" +@@ -216,7 +272,8 @@ + (match_operand:SI 2 "cirrus_shift_const" "")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfsh64%?\\t%V0, %V1, #%s2" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "cirrus_ashiftrtdi_const" +@@ -225,7 +282,8 @@ + (match_operand:SI 2 "cirrus_shift_const" "")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfsh64%?\\t%V0, %V1, #-%s2" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "*cirrus_absdi2" +@@ -233,7 +291,8 @@ + (abs:DI (match_operand:DI 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfabs64%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + ;; This doesn't really clobber ``cc''. Fixme: aldyh. +@@ -243,7 +302,8 @@ + (clobber (reg:CC CC_REGNUM))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfneg64%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "*cirrus_negsi2" +@@ -251,7 +311,8 @@ + (neg:SI (match_operand:SI 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfneg32%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + ; Cirrus hardware bug: neg 0 -> 0 instead of -0 +@@ -260,7 +321,8 @@ + (neg:SF (match_operand:SF 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS (SFmode)" + "cfnegs%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "*cirrus_negdf2" +@@ -268,7 +330,8 @@ + (neg:DF (match_operand:DF 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && ! HONOR_SIGNED_ZEROS (DFmode)" + "cfnegd%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + ;; This doesn't really clobber the condition codes either. +@@ -278,7 +341,8 @@ + (clobber (reg:CC CC_REGNUM))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK && 0" + "cfabs32%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "*cirrus_abssf2" +@@ -286,7 +350,8 @@ + (abs:SF (match_operand:SF 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfabss%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "*cirrus_absdf2" +@@ -294,7 +359,8 @@ + (abs:DF (match_operand:DF 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfabsd%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "farith") ++ (set_attr "cirrus" "normal")] + ) + + ;; Convert Cirrus-SI to Cirrus-SF +@@ -303,7 +369,8 @@ + (float:SF (match_operand:SI 1 "s_register_operand" "r")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfmv64lr%?\\t%Z0, %1\;cfcvt32s%?\\t%V0, %Y0" +- [(set_attr "length" "8") ++ [(set_attr "type" "f_cvt") ++ (set_attr "length" "8") + (set_attr "cirrus" "move")] + ) + +@@ -312,7 +379,8 @@ + (float:DF (match_operand:SI 1 "s_register_operand" "r")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfmv64lr%?\\t%Z0, %1\;cfcvt32d%?\\t%V0, %Y0" +- [(set_attr "length" "8") ++ [(set_attr "type" "f_cvt") ++ (set_attr "length" "8") + (set_attr "cirrus" "move")] + ) + +@@ -321,14 +389,18 @@ + (float:SF (match_operand:DI 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfcvt64s%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")]) ++ [(set_attr "type" "f_cvt") ++ (set_attr "cirrus" "normal")] ++) + + (define_insn "floatdidf2" + [(set (match_operand:DF 0 "cirrus_fp_register" "=v") + (float:DF (match_operand:DI 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfcvt64d%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")]) ++ [(set_attr "type" "f_cvt") ++ (set_attr "cirrus" "normal")] ++) + + (define_insn "cirrus_truncsfsi2" + [(set (match_operand:SI 0 "s_register_operand" "=r") +@@ -336,7 +408,8 @@ + (clobber (match_scratch:DF 2 "=v"))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cftruncs32%?\\t%Y2, %V1\;cfmvr64l%?\\t%0, %Z2" +- [(set_attr "length" "8") ++ [(set_attr "type" "f_cvt") ++ (set_attr "length" "8") + (set_attr "cirrus" "normal")] + ) + +@@ -346,7 +419,8 @@ + (clobber (match_scratch:DF 2 "=v"))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cftruncd32%?\\t%Y2, %V1\;cfmvr64l%?\\t%0, %Z2" +- [(set_attr "length" "8")] ++ [(set_attr "type" "f_cvt") ++ (set_attr "length" "8")] + ) + + (define_insn "*cirrus_truncdfsf2" +@@ -355,7 +429,8 @@ + (match_operand:DF 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfcvtds%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "f_cvt") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "*cirrus_extendsfdf2" +@@ -363,7 +438,8 @@ + (float_extend:DF (match_operand:SF 1 "cirrus_fp_register" "v")))] + "TARGET_32BIT && TARGET_HARD_FLOAT && TARGET_MAVERICK" + "cfcvtsd%?\\t%V0, %V1" +- [(set_attr "cirrus" "normal")] ++ [(set_attr "type" "f_cvt") ++ (set_attr "cirrus" "normal")] + ) + + (define_insn "*cirrus_arm_movdi" diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-readme.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-readme.patch new file mode 100644 index 0000000000..9d75abd08a --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-readme.patch @@ -0,0 +1,107 @@ +--- gcc-4.3.2-orig/gcc/config/arm/README-Maverick 1970-01-01 01:00:00.000000000 +0100 ++++ gcc-4.3.2/gcc/config/arm/README-Maverick 2009-03-10 22:04:26.000000000 +0000 +@@ -0,0 +1,104 @@ ++Cirrus Logic MaverickCrunch FPU support ++======================================= ++ ++The MaverickCrunch is an FPU coprocessor that only exists in combination ++with an arm920t (ARMv4t arch) integer core in the 200MHz EP93xx devices. ++Code generation for it is usually selected with ++ -mcpu=ep9312 -mfpu=maverick (and most likely -mfloat-abi=softfp) ++ ++Within GCC, the names "cirrus" "maverick" and "crunch" are used randomly ++in filenames and identifiers, but they all refer to the same thing. ++ ++Initial support was mainlined by RedHat in gcc-3 but this never generated ++working code. Cirrus Logic funded the company Nucleusys to produce a modified ++GCC for it, but this never worked either. The first set of patches to pass ++the testsuite were made by Hasjim Williams for Open Embedded, though they ++did this by disabling various features and optimisations, therby incurring ++a small negative impact on regular ARM code generation. ++The OE ideas were reimplemented by Martin Guy to produce a working compiler ++with no negwative impact on regular code generation. ++ ++The FPU's characteristics ++------------------------- ++Like most ARM coprocessors, it runs in parallel with the ARM though its ++instructions are inserted into the regular ARM instructions stream. ++It has 16 64-bit registers that can be operated as 32-bit or 64-bit integers ++or as 32-bit or 64-bit floats, three 72-bit saturating multiplier-accumulators. ++It can add, sub, mul, cmp, abs and neg these types, convert between them and ++transfer values between its registers and the ARM registers or main memory. ++ ++Comparisons performed in the Maverick unit set the condition codes differently ++from the ARM/FPA/VFP instructions: ++ ++ ARM/FPA/VFP - (cmp*): MaverickCrunch - (cfcmp*): ++ N Z C V N Z C V ++ A == B 0 1 1 0 A == B 0 1 0 0 ++ A < B 1 0 0 0 A < B 1 0 0 0 ++ A > B 0 0 1 0 A > B 1 0 0 1 ++ unord 0 0 1 1 unord 0 0 0 0 ++ ++which means that the same conditions have to be tested for with different ARM ++conditions after a Maverick comparison. Furthermore, some conditions cannot ++be tested with a single condition. ++This was already true on ARM/FPA/VFP for conditions UNEQ and LTGT; ++on Maverick comparisons it is GE UNLT ORDERED and UNORDERED that cannot. ++(GE after a floating point comparison, that is, not after an integer comarison) ++ ++GCC's use of the Maverick unit ++------------------------------ ++GCC only uses the 32-bit and 64-bit floating point modes and the 64-bit ++integer mode. It does not use the 72-bit accumulators or the 32-bit integer ++mode because, from "GCC Machine Descriptions": ++ "It is obligatory to support floating point `movm' instructions ++ into and out of any registers that can hold fixed point values, ++ because unions and structures (which have modes SImode or DImode) ++ can be in those registers and they may have floating point members." ++(search also for "grief" in arm.c). ++ ++It does not use the 64-bit integer comparison instruction because it can only ++do a signed or an unsigned comparison, while GCC expect the comparison to set ++the conditions codes for both modes and then to use the signed or unsigned ++mode when the condition code bits are tested. ++ ++The different setting of the condition codes is tracked with an additional ++CCMAV mode for the condition code register, set when a comparison is performed ++in the Maverick unit. This always indicates a floating point comparison since ++the Maverick's 64-bit comparison is not used. ++ ++Hardware bugs and workarounds ++----------------------------- ++All silicon implementations of the FPU have a dozen hardware bugs, mostly ++timing-dependent bugs that can write garbage into registers or memory or get ++conditional tests wrong, as well as a widespread failure to respect ++denormalised values. See http://wiki.debian.org/ArmEabiMaverickCrunch ++ ++There used to be a -mcirrus-fix-invalid-instructions flag that claimed ++to avoid bugs in revision D0 silicon but its code was broken junk. ++Currently GCC always avoids the timing bugs in revision D1 to E2 silicon, ++while the many extra timing bugs in the now rare revision D0 are not handled. ++ ++By default, the instructions that drop denoermalized values are enabled ++so as to obtain maximum speed at lower precision. By default, the cfnegs ++and cfnegd instrutions are disabled, since they also fail to produce negative ++zero. They can be enabled with -fno-signed-zeros. ++ ++When -mfpu=maverick is selected, an additional -mieee flag is active that ++gives full IEEE precision by performs all the non-denorm-respecting ++floating point instructions in the softfloat library routines or in the ++integer registers. ++ ++The 64-bit integer support is still buggy so it is disabled unless the ++-mcirrus-di flag is supplied. As well as the having unidentified ++hardware bugs which make openssl's testsuite fail in */sha/sha512.c and in ++*/bn/bn_adm.c, 64-bit shifts only work up to 31 places left or 32 right. ++ ++Other bugs ++---------- ++There seems to be no way to configure GCC to select Maverick code generation ++as the default. ++ ++--with-arch=ep9312 the assembler barfs saying that ep9312 is not a ++recognised architecture. ++--with-arch=armv4t the build fails when it tries to compile hard FPA ++instructions into libgcc, ++--with-cpu=ep9312 it compiles armv5t instructions into libgcc diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-repair-truncxfsi.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-repair-truncxfsi.patch new file mode 100644 index 0000000000..b15ad24a85 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-repair-truncxfsi.patch @@ -0,0 +1,29 @@ +Fix two bugs in the Maverick trunc[sd]fsi expansions: +- the target of cirrus_truncsfsi2 is an ARM register, not a Maverick register. +- a typo in both descriptions transfers info for operand 0 into operand 1 + + Martin Guy <martinwguy"yahoo.it> 15 Nov 2008 + +--- gcc-4.3.2/gcc/config/arm/arm.md.old 2008-11-09 19:13:54.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.md 2008-11-15 18:11:08.000000000 +0000 +@@ -3574,10 +3574,8 @@ + " + if (TARGET_MAVERICK) + { +- if (!cirrus_fp_register (operands[0], SImode)) +- operands[0] = force_reg (SImode, operands[0]); + if (!cirrus_fp_register (operands[1], SFmode)) +- operands[1] = force_reg (SFmode, operands[0]); ++ operands[1] = force_reg (SFmode, operands[1]); + emit_insn (gen_cirrus_truncsfsi2 (operands[0], operands[1])); + DONE; + } +@@ -3591,7 +3589,7 @@ + if (TARGET_MAVERICK) + { + if (!cirrus_fp_register (operands[1], DFmode)) +- operands[1] = force_reg (DFmode, operands[0]); ++ operands[1] = force_reg (DFmode, operands[1]); + emit_insn (gen_cirrus_truncdfsi2 (operands[0], operands[1])); + DONE; + } diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-saveregs.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-saveregs.patch new file mode 100644 index 0000000000..6bbc959bde --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-saveregs.patch @@ -0,0 +1,88 @@ +Save Maverick registers on function entry and restore them on exit if they +are modified within the function and are among those that must be preserved +across function calls. + +Also check whether Maverik registers need restoring when deciding whether to +return directly from the middle of a function without an epilogue. + +This combines futaris' [saveregs] and [use_return_insn] patches. + +--- gcc-4.3.2-orig/gcc/config/arm/arm.c 2008-06-11 11:52:55.000000000 +0100 ++++ gcc-4.3.2/gcc/config/arm/arm.c 2008-09-27 12:40:19.000000000 +0100 +@@ -1738,6 +1738,12 @@ + if (df_regs_ever_live_p (regno) && !call_used_regs[regno]) + return 0; + ++ /* Likewise Maverick regs. */ ++ if (TARGET_MAVERICK) ++ for (regno = FIRST_CIRRUS_FP_REGNUM; regno <= LAST_CIRRUS_FP_REGNUM; regno++) ++ if (df_regs_ever_live_p (regno) && !call_used_regs[regno]) ++ return 0; ++ + if (TARGET_REALLY_IWMMXT) + for (regno = FIRST_IWMMXT_REGNUM; regno <= LAST_IWMMXT_REGNUM; regno++) + if (df_regs_ever_live_p (regno) && ! call_used_regs[regno]) +@@ -11315,6 +11321,17 @@ + reg, FP_REGNUM, floats_offset - vfp_offset); + } + } ++ else if (arm_fpu_arch == FPUTYPE_MAVERICK) ++ { ++ for (reg = LAST_CIRRUS_FP_REGNUM; reg >= FIRST_CIRRUS_FP_REGNUM; reg--) ++ if (df_regs_ever_live_p (reg) && !call_used_regs[reg]) ++ { ++ floats_offset += 8; ++ asm_fprintf (f, "\tcfldrd\tmvd%d, [%r, #-%d]\n", ++ reg - FIRST_CIRRUS_FP_REGNUM, FP_REGNUM, ++ floats_offset - vfp_offset); ++ } ++ } + else + { + start_reg = LAST_FPA_REGNUM; +@@ -11480,6 +11497,13 @@ + asm_fprintf (f, "\tldfe\t%r, [%r], #12\n", + reg, SP_REGNUM); + } ++ else if (arm_fpu_arch == FPUTYPE_MAVERICK) ++ { ++ for (reg = FIRST_CIRRUS_FP_REGNUM; reg <= LAST_CIRRUS_FP_REGNUM; reg++) ++ if (df_regs_ever_live_p (reg) && !call_used_regs[reg]) ++ asm_fprintf (f, "\tcfldrd\tmvd%u, [%r], #8\n", ++ reg - FIRST_CIRRUS_FP_REGNUM, SP_REGNUM); ++ } + else + { + start_reg = FIRST_FPA_REGNUM; +@@ -11991,6 +12015,11 @@ + func_type = arm_current_func_type (); + if (! IS_VOLATILE (func_type)) + { ++ /* Space for saved MAVERICK registers. */ ++ for (regno = FIRST_CIRRUS_FP_REGNUM; regno <= LAST_CIRRUS_FP_REGNUM; regno++) ++ if (df_regs_ever_live_p (regno) && !call_used_regs[regno]) ++ saved += 8; ++ + /* Space for saved FPA registers. */ + for (regno = FIRST_FPA_REGNUM; regno <= LAST_FPA_REGNUM; regno++) + if (df_regs_ever_live_p (regno) && ! call_used_regs[regno]) +@@ -12156,6 +12185,19 @@ + saved_size += 12; + } + } ++ else if (arm_fpu_arch == FPUTYPE_MAVERICK) ++ { ++ for (reg = LAST_CIRRUS_FP_REGNUM; reg >= FIRST_CIRRUS_FP_REGNUM; reg--) ++ if (df_regs_ever_live_p (reg) && !call_used_regs[reg]) ++ { ++ insn = gen_rtx_PRE_DEC (DFmode, stack_pointer_rtx); ++ insn = gen_rtx_MEM (DFmode, insn); ++ insn = emit_insn (gen_rtx_SET (VOIDmode, insn, ++ gen_rtx_REG (DFmode, reg))); ++ RTX_FRAME_RELATED_P (insn) = 1; ++ saved_size += 8; ++ } ++ } + else + { + start_reg = LAST_FPA_REGNUM; diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-scratch.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-scratch.patch new file mode 100644 index 0000000000..fa3dc80b70 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-crunch-scratch.patch @@ -0,0 +1,27 @@ +Increase the number of Cirrus scratch registers from 4 to 8 (ie half of them) + +--- gcc-4.3.2/gcc/config/arm/arm.h.old 2008-09-26 16:01:45.000000000 +0100 ++++ gcc-4.3.2/gcc/config/arm/arm.h 2008-09-28 11:20:19.000000000 +0100 +@@ -626,8 +626,8 @@ + + /* + mvf0 Cirrus floating point result +- mvf1-mvf3 Cirrus floating point scratch +- mvf4-mvf15 S Cirrus floating point variable. */ ++ mvf1-mvf7 Cirrus floating point scratch ++ mvf8-mvf15 S Cirrus floating point variable. */ + + /* s0-s15 VFP scratch (aka d0-d7). + s16-s31 S VFP variable (aka d8-d15). +diff -urN gcc-4.3.0/gcc/config/arm/arm.h gcc-4.3.0/gcc/config/arm/arm.h +--- gcc-4.3.2/gcc/config/arm/arm.h 2008-04-07 12:17:46.000000000 +1000 ++++ gcc-4.3.2/gcc/config/arm/arm.h 2008-04-07 12:18:10.000000000 +1000 +@@ -753,7 +752,7 @@ + regno <= LAST_CIRRUS_FP_REGNUM; ++ regno) \ + { \ + fixed_regs[regno] = 0; \ +- call_used_regs[regno] = regno < FIRST_CIRRUS_FP_REGNUM + 4; \ ++ call_used_regs[regno] = regno < FIRST_CIRRUS_FP_REGNUM + 8; \ + } \ + } \ + if (TARGET_VFP) \ diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-prologue_use-length.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-prologue_use-length.patch new file mode 100644 index 0000000000..d08b4fcad1 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-prologue_use-length.patch @@ -0,0 +1,10 @@ +--- gcc-4.3.2/gcc/config/arm/arm.md.old 2008-12-09 10:23:57.000000000 +0000 ++++ gcc-4.3.2/gcc/config/arm/arm.md 2009-03-10 12:14:01.000000000 +0000 +@@ -11110,6 +11110,7 @@ + [(unspec:SI [(match_operand:SI 0 "register_operand" "")] UNSPEC_PROLOGUE_USE)] + "" + "%@ %0 needed for prologue" ++ [(set_attr "length" "0")] + ) + + diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/arm-size-bugfix.patch b/recipes/gcc/gcc-4.3.3/ep93xx/arm-size-bugfix.patch new file mode 100644 index 0000000000..c3f3f3d288 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/arm-size-bugfix.patch @@ -0,0 +1,33 @@ +Fix an obvious bug in GCC-4.3.2's ARM code generator. + +PR target/37668 + * arm.c (arm_size_rtx_costs, case NEG): Don't fall through if the + result will be in an FPU register. + +This has been applied in gcc-4.4.0 + + Martin Guy <martinwguy@yahoo.it> + +*** gcc-4.3.2/gcc/config/arm/arm.c (revision 142660) +--- gcc-4.3.2/gcc/config/arm/arm.c (local) +*************** arm_size_rtx_costs (rtx x, int code, int +*** 5201,5207 **** + + case NEG: + if (TARGET_HARD_FLOAT && GET_MODE_CLASS (mode) == MODE_FLOAT) +! *total = COSTS_N_INSNS (1); + /* Fall through */ + case NOT: + *total = COSTS_N_INSNS (ARM_NUM_REGS (mode)); +--- 5201,5211 ---- + + case NEG: + if (TARGET_HARD_FLOAT && GET_MODE_CLASS (mode) == MODE_FLOAT) +! { +! *total = COSTS_N_INSNS (1); +! return false; +! } +! + /* Fall through */ + case NOT: + *total = COSTS_N_INSNS (ARM_NUM_REGS (mode)); diff --git a/recipes/gcc/gcc-4.3.3/ep93xx/series b/recipes/gcc/gcc-4.3.3/ep93xx/series new file mode 100644 index 0000000000..e6bfe421f1 --- /dev/null +++ b/recipes/gcc/gcc-4.3.3/ep93xx/series @@ -0,0 +1,25 @@ +arm-crunch-readme.patch +arm-crunch-saveregs.patch +arm-crunch-scratch.patch +arm-crunch-eabi-ieee754-endian-littleword-littlebyte.patch +arm-crunch-eabi-mvf0-scratch-ieee754.patch +arm-crunch-20000320.patch +arm-crunch-disable-cmpdi.patch +arm-crunch-fix-64bit-const-offsets.patch +arm-crunch-fp_consts.patch +arm-crunch-neg-enable.patch +arm-crunch-neg-protect.patch +arm-crunch-repair-truncxfsi.patch +arm-crunch-floatsi-no-scratch.patch +arm-crunch-movsf-movdf-Uy.patch +arm-crunch-drop-thumb2.patch +arm-crunch-arm_dbx_register_number.patch +arm-crunch-pipeline.patch +arm-crunch-ccmav-mode.patch +arm-crunch-cfcpy-with-cfsh64.patch +arm-crunch-mieee.patch +arm-size-bugfix.patch +arm-prologue_use-length.patch +arm-crunch-cftruncd32-attr.patch +arm-crunch-fix-cirrus-reorg5.patch +arm-crunch-cirrus-di-flag.patch |