aboutsummaryrefslogtreecommitdiffstats
path: root/packages/slugos-init
AgeCommit message (Collapse)Author
2009-02-13SlugOS: setup-optware.sh - whitespace fix.Mike Westerhof
2009-02-13SlugOS: slugos-init - add /sbin/setup-optware.shMike Westerhof
2009-02-08SlugOS: /sbin/sysconf - accomodate bugs in recent busybox ash, fix a few typosMike Westerhof
(ash can no longer handle: command <>/dev/tty >&0 -- fails with "Bad file descriptor" error.)
2009-01-25SlugOS: slugos-init - add modprobe.d/usb to the files list.Mike Westerhof
2009-01-25SlugOS: add modprobe.d/usb - ensure usb modules are loaded in correct orderMike Westerhof
Avoid kernel warning message.
2008-12-14SlugOS: slugos-init - bump PRMike Westerhof
2008-12-14SlugOS: leds - fix the extraneous error message if no beeper correctly.Mike Westerhof
2008-12-14SlugOS: slugos-init - bump PR, and tuck away the reflash tool on the rootfsMike Westerhof
2008-12-14SlugOS: turnup - comment out some messages printed during normal operationMike Westerhof
(some were clearly debug, and the syslog messages are just confusing to the average user -- best to limit output to "silence if all is well")
2008-12-14SlugOS: leds - fix extraneous error message issued on beeperless systemsMike Westerhof
2008-12-14SlugOS: turnup - ensure that /sys and /proc are mounted first in linuxrcMike Westerhof
(fixes lack of "beep" when userspace starts)
2008-12-07slugos-init: cleanup work, eliminate a warning messages at boot time.Mike Westerhof
2008-12-07slugos-init: remove last traces of /boot/kexecMike Westerhof
2008-12-07slugos-init: drop boot/kexec, alway mount /proc and /sysMike Westerhof
2008-10-18bb files: Revert the introduction of FILE_PRHolger Hans Peter Freyther
This is a partial revert of aa03004ace2fabb135a6208ef8c2d2b312aa7b0b. The approach that was taken leads to disagreement and the change was pushed too early. DISTRO_PR is going to say and will be used inside the package creation. There will be more disucssion on the list about where to continue from here.
2008-10-15[PR] Change PR to FILE_PR and intro PR as FILE_PR + DISTRO_PRHolger Hans Peter Freyther
Allow a distribution to globally bump the PR of every package this is useful when there was a change in the toolchain and every package is going to be different. find packages/ \( -name '*.bb' -or -name '*.inc' \) -exec sed -i s/"^PR="/"FILE_PR ="/ {} \; find packages/ \( -name '*.bb' -or -name '*.inc' \) -exec sed -i s/"^PR ="/"FILE_PR ="/ {} \; Acked-By: Koen Kooi <koen@openembedded.org>
2008-10-15mtn2git: remove .mtn2git_empty files in non-empty directoriesJan Luebbe
2008-09-21slugos-init: leds: Apply patch for varying input event number (from Gordon ↵Rod Whitby
Farquharson)
2008-08-29SlugOS 5.0: enable mdraid supportMike Westerhof
2008-08-29SlugOS 5.0: /etc/default/functions - also make sure that /dev/tty0 existsMike Westerhof
as one of the minimal device nodes.
2008-08-29SlugOS 5.0 : conffiles - innocuous change to the comments to correct ipkg/opkg.Mike Westerhof
This has the desired side-effect of requiring manual review by the user of sysconf restoration after upgrading to SlugOS 5.0
2008-08-25SlugOS 5.0 - slugos-init: update to make nfs boot work correctly; cleanupMike Westerhof
of kexec stuff (although kexec won't work with the current kernel yet).
2008-08-24SlugOS 5 - replace "mount -U" with "mount UUID=" which works with both mountMike Westerhof
and busybox mount; also update boot/disk script to ensure that some key devices exist in the new /dev which will enable booting to a virgin nfsroot.
2008-08-22SlugOS 5.0 - make booting to a ramdisk (via turnup ram) work again;Mike Westerhof
need to accomodate an inconsistency between find and busybox find.
2008-08-22slugOS 5.0 is born - initial commit.Mike Westerhof
- enable many busybox options - replace several packages in rootfs with busybox, and adjust various config files and scripts to accomodate busybox options - change default alignment behavior to be more lenient Note: this is the first of many disruptive changes for SlugOS 5; this version is to be considered unstable at best!
2008-04-03slugos-init: Updated the leds script to handle new led naming scheme.Rod Whitby
2008-03-26slugos-init: Changed boot scripts to only load modules if they are not ↵Rod Whitby
already loaded
2008-03-22sysconf: make sure temporary partition is unmounted even in event of error.Mike Westerhof
2008-02-10SlugOS: make "turnup nfs" work correctly with the new network driver (loadsMike Westerhof
firmware, and ensures we do not ifup the interface if the rootfs in nfs).
2008-02-04SlugOS: updated boot scripts to support nfs rootfs with the new network driver.Mike Westerhof
2008-01-25divers: remove lines of the form "PACKAGES = ${PN}" from 63 filesRolf Leggewie
2008-01-25slugos-init: Updated leds handling to match latest kernel patchesRod Whitby
2007-12-24slugos-init: Removed reflash scriptRod Whitby
2007-11-21slugos-init: turnup - use volatiles to create /var/log/lastlog when turned-upMike Westerhof
to external storage (NFS, memstick, or disk). This stops openssh complaining.
2007-10-06slugos-init: Load ehci-hcd on bootRod Whitby
2007-08-12Bump PRMike Westerhof
2007-08-12zleds: announce via beeper when rc3.d scripts are completed (ssh login is ↵Mike Westerhof
ready).
2007-07-03/boot/kexec: Added tftp method to fetch kernel to boot, added notes onMike Westerhof
usage to the comments section.
2007-07-02SlugOS init files: fixed network boot code for dsmg600 and added delay to ifupMike Westerhof
(fix dhcp timeout before link negotiation complete) for network boot. Added kexec boot script (no turnup support yet, manual only).
2007-06-27slugos-init: Another spot to support rootfs mtd partition naming.Rod Whitby
2007-06-26slugos-init: Updated turnup, sysconf and reflash scripts to handle the root ↵Rod Whitby
partition being named 'rootfs' instead of the vendor firmware naming.
2007-06-04turnup: updated to use the populate-volatile mechanism to manage /varMike Westerhof
when initializing a rootfs on disk, memstick, or nfs.
2007-04-03slugos-init: change find option -mount to -xdev in turnup (so that turnupMike Westerhof
can work with either busybox find or with the full find utility).
2007-03-30slugos-init: Remove special altboot support - turnup flash is all that is ↵Rod Whitby
required.
2007-03-30slugos-init: Add support for handing boot control over to altboot.Rod Whitby
2007-03-16slugos-init: improve the handling of the ready led for the nas100d (i.e. ↵Rod Whitby
stop it blinking when everything is up)
2007-02-21slugos-init: turnup disk -s<n> fixed, default delay set to 10 secsMike Westerhof
2007-02-15slugos-init: No longer require the links.conf for the /dev/rtc linkRod Whitby
2006-12-31remove extra whitespace at end-of-line in about 900 bb files.Rolf Leggewie
2006-12-25slugos: Added NAS100d image supportRod Whitby