From f186c8103c9195eb53238c928fe03f7af1d43479 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 9 Dec 2008 00:35:08 +0300 Subject: linux-kexecboot: support tosa port patches from linux-rp-2.6.24 to linux-kexecboot to enable booting on tosa. Signed-off-by: Dmitry Baryshkov --- ...me-registration-of-regions-of-memory-that.patch | 201 ++++ ...97-switch-AC-unit-to-correct-state-before.patch | 56 + ...alloc_coherent-on-ARM-so-that-it-supports.patch | 260 +++++ .../tosa/0003-Core-MFD-support.patch | 243 +++++ .../0004-Add-support-for-tc6393xb-MFD-core.patch | 907 ++++++++++++++++ .../0005-Add-support-for-tc6387xb-MFD-core.patch | 249 +++++ .../0006-Add-support-for-t7l66xb-MFD-core.patch | 653 +++++++++++ ...07-Common-headers-for-TMIO-MFD-subdevices.patch | 81 ++ .../tosa/0008-Nand-driver-for-TMIO-devices.patch | 608 +++++++++++ .../tosa/0009-FB-driver-for-TMIO-devices.patch | 1128 ++++++++++++++++++++ .../tosa/0010-OHCI-driver-for-TMIO-devices.patch | 431 ++++++++ .../tosa/0011-MMC-driver-for-TMIO-devices.patch | 891 ++++++++++++++++ .../tosa/0012-Tosa-keyboard-support.patch | 593 ++++++++++ ...-gadget-pxa2xx_udc-supports-inverted-vbus.patch | 61 ++ .../tosa/0014-tosa_udc_use_gpio_vbus.patch.patch | 38 + .../tosa/0015-sharpsl-export-params.patch | 32 + ...fixes-the-pxa25x-clocks-definitions-to-ad.patch | 44 + .../0017-Convert-pxa2xx-UDC-to-use-debugfs.patch | 280 +++++ ...2xx_udc-to-balance-calls-to-clk_enable-cl.patch | 225 ++++ ...xa-remove-periodic-mode-emulation-support.patch | 128 +++ ...ew-device-clock-backports-from-2.6.24-git.patch | 257 +++++ ...y-drivers-gpio-directory-for-gpiolib-infr.patch | 121 +++ ...-implementation-infrastructure-that-platf.patch | 746 +++++++++++++ ...-gpiolib-support-for-the-PXA-architecture.patch | 498 +++++++++ ...cumentation-gpio.txt-primarily-to-include.patch | 238 +++++ ...f-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch | 434 ++++++++ ...nk-we-should-check-for-IRQs-when-determin.patch | 134 +++ ...ne-of-the-most-common-for-small-non-recha.patch | 59 + ...spend-resume-wakeup-support-for-pda_power.patch | 72 ++ ...ing-VOLTAGE_-properties-for-apm-calculati.patch | 163 +++ .../0030-Core-driver-for-WM97xx-touchscreens.patch | 1083 +++++++++++++++++++ ...31-Add-chip-driver-for-WM9705-touchscreen.patch | 383 +++++++ ...32-Add-chip-driver-for-WM9712-touchscreen.patch | 492 +++++++++ ...33-Add-chip-driver-for-WM9713-touchscreen.patch | 490 +++++++++ ...-WM97xx-touchscreens-in-streaming-mode-on.patch | 329 ++++++ ...m-and-MAINTAINERS-entry-for-WM97xx-touchs.patch | 122 +++ .../0036-Set-id-to-1-for-wm97xx-subdevices.patch | 35 + ...the-codec-list-in-snd_soc_dapm_new_widget.patch | 41 + ...the-codec-list-in-snd_soc_dapm_new_widget.patch | 57 + ...Add-generic-framework-for-managing-clocks.patch | 446 ++++++++ .../tosa/0040-Clocklib-debugfs-support.patch | 108 ++ ...e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch | 593 ++++++++++ .../0042-Use-correct-clock-for-IrDA-on-pxa.patch | 26 + .../0043-Use-clocklib-for-sa1100-sub-arch.patch | 153 +++ .../tosa/0044-fix-tmio_mmc-debug-compilation.patch | 26 + .../tosa/0045-Update-tmio_ohci.patch | 416 ++++++++ .../tosa/0046-patch-tc6393xb-cleanup.patch | 66 ++ ...use-bitmasks-instead-of-bit-field-structs.patch | 412 +++++++ .../tosa/0048-tc6393xb-GPIO-support.patch | 225 ++++ .../0049-platform-support-for-TMIO-on-tosa.patch | 373 +++++++ .../tosa/0050-tosa-update-for-tc6393xb-gpio.patch | 99 ++ ...-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch | 86 ++ .../0052-tosa-platform-backlight-support.patch | 400 +++++++ .../tosa/0053-sound-soc-codecs-wm9712.c-28.patch | 56 + .../tosa/0054-sound-soc-codecs-wm9712.c-2.patch | 28 + ...WERON-to-the-list-of-devices-that-we-supp.patch | 30 + ...6-Support-resetting-by-asserting-GPIO-pin.patch | 126 +++ .../tosa/0057-Clean-up-tosa-resetting.patch | 70 ++ .../tosa/0058-Fix-tosakbd-suspend.patch | 27 + .../tosa/0059-patch-tosa-wakeup-test.patch | 46 + ...0060-Add-support-for-power_supply-on-tosa.patch | 623 +++++++++++ .../tosa/0061-tosa-bat-unify.patch | 342 ++++++ .../tosa/0062-tosa-bat-fix-charging.patch | 78 ++ .../tosa/0063-patch-tosa-bat-jacket-detect.patch | 84 ++ .../tosa/0064-Export-modes-via-sysfs.patch | 27 + .../tosa/0065-wm97xx-core-fixes.patch | 49 + .../0066-tmiofb_probe-should-be-__devinit.patch | 26 + .../tosa/0067-modeswitching.patch | 225 ++++ .../tosa/0068-Preliminary-tosa-denoiser.patch | 239 +++++ .../linux-kexecboot-2.6.24/tosa/defconfig | 802 ++------------ .../tosa/tmiofb-fix-unaccel.patch | 33 + .../linux-kexecboot-2.6.24/tosa/tosa-bl-fixup.diff | 103 ++ packages/kexecboot/linux-kexecboot_2.6.24.bb | 9 +- 73 files changed, 18617 insertions(+), 698 deletions(-) create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-Allow-runtime-registration-of-regions-of-memory-that.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0002-Modify-dma_alloc_coherent-on-ARM-so-that-it-supports.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0003-Core-MFD-support.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0004-Add-support-for-tc6393xb-MFD-core.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0005-Add-support-for-tc6387xb-MFD-core.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0006-Add-support-for-t7l66xb-MFD-core.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0007-Common-headers-for-TMIO-MFD-subdevices.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0008-Nand-driver-for-TMIO-devices.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0009-FB-driver-for-TMIO-devices.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0010-OHCI-driver-for-TMIO-devices.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0012-Tosa-keyboard-support.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0013-USB-gadget-pxa2xx_udc-supports-inverted-vbus.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0014-tosa_udc_use_gpio_vbus.patch.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0015-sharpsl-export-params.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0019-pxa-remove-periodic-mode-emulation-support.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0020-Provide-dew-device-clock-backports-from-2.6.24-git.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0021-Add-an-empty-drivers-gpio-directory-for-gpiolib-infr.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0023-This-adds-gpiolib-support-for-the-PXA-architecture.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0024-Update-Documentation-gpio.txt-primarily-to-include.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0025-Signed-off-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0029-Support-using-VOLTAGE_-properties-for-apm-calculati.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0030-Core-driver-for-WM97xx-touchscreens.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0031-Add-chip-driver-for-WM9705-touchscreen.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0032-Add-chip-driver-for-WM9712-touchscreen.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0033-Add-chip-driver-for-WM9713-touchscreen.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0034-Driver-for-WM97xx-touchscreens-in-streaming-mode-on.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0035-Build-system-and-MAINTAINERS-entry-for-WM97xx-touchs.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0036-Set-id-to-1-for-wm97xx-subdevices.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0037-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0038-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0039-Add-generic-framework-for-managing-clocks.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0040-Clocklib-debugfs-support.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0041-From-80a359e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0042-Use-correct-clock-for-IrDA-on-pxa.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0044-fix-tmio_mmc-debug-compilation.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0045-Update-tmio_ohci.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0046-patch-tc6393xb-cleanup.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0047-tc6393xb-use-bitmasks-instead-of-bit-field-structs.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0048-tc6393xb-GPIO-support.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0049-platform-support-for-TMIO-on-tosa.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0050-tosa-update-for-tc6393xb-gpio.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0051-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0052-tosa-platform-backlight-support.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0053-sound-soc-codecs-wm9712.c-28.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0054-sound-soc-codecs-wm9712.c-2.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0055-Add-GPIO_POWERON-to-the-list-of-devices-that-we-supp.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0057-Clean-up-tosa-resetting.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0058-Fix-tosakbd-suspend.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0059-patch-tosa-wakeup-test.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0060-Add-support-for-power_supply-on-tosa.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0061-tosa-bat-unify.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0062-tosa-bat-fix-charging.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0063-patch-tosa-bat-jacket-detect.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0064-Export-modes-via-sysfs.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0065-wm97xx-core-fixes.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0066-tmiofb_probe-should-be-__devinit.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0067-modeswitching.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/0068-Preliminary-tosa-denoiser.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/tmiofb-fix-unaccel.patch create mode 100644 packages/kexecboot/linux-kexecboot-2.6.24/tosa/tosa-bl-fixup.diff diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-Allow-runtime-registration-of-regions-of-memory-that.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-Allow-runtime-registration-of-regions-of-memory-that.patch new file mode 100644 index 0000000000..ba79b4a470 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-Allow-runtime-registration-of-regions-of-memory-that.patch @@ -0,0 +1,201 @@ +From d48a09b301d9a460d5ce027433e8cb8872e7b5c3 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 4 Jan 2008 18:26:38 +0000 +Subject: [PATCH 01/64] Allow runtime registration of regions of memory that require dma bouncing. + +--- + arch/arm/common/Kconfig | 4 ++ + arch/arm/common/dmabounce.c | 82 ++++++++++++++++++++++++++++++++++++- + arch/arm/common/sa1111.c | 2 +- + arch/arm/mach-ixp4xx/Kconfig | 1 + + arch/arm/mach-ixp4xx/common-pci.c | 2 +- + 5 files changed, 87 insertions(+), 4 deletions(-) + +diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig +index 3e07346..5f357fb 100644 +--- a/arch/arm/common/Kconfig ++++ b/arch/arm/common/Kconfig +@@ -13,10 +13,14 @@ config ICST307 + config SA1111 + bool + select DMABOUNCE ++ select PLATFORM_DMABOUNCE + + config DMABOUNCE + bool + ++config PLATFORM_DMABOUNCE ++ bool ++ + config TIMER_ACORN + bool + +diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c +index 52fc6a8..ed80abe 100644 +--- a/arch/arm/common/dmabounce.c ++++ b/arch/arm/common/dmabounce.c +@@ -16,6 +16,7 @@ + * + * Copyright (C) 2002 Hewlett Packard Company. + * Copyright (C) 2004 MontaVista Software, Inc. ++ * Copyright (C) 2007 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License +@@ -24,6 +25,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -80,6 +82,80 @@ struct dmabounce_device_info { + rwlock_t lock; + }; + ++struct dmabounce_check_entry { ++ struct list_head list; ++ dmabounce_check checker; ++ void *data; ++}; ++ ++static struct list_head checkers = LIST_HEAD_INIT(checkers); ++static rwlock_t checkers_lock = RW_LOCK_UNLOCKED; ++ ++int ++dmabounce_register_checker(dmabounce_check function, void *data) ++{ ++ unsigned long flags; ++ struct dmabounce_check_entry *entry = ++ kzalloc(sizeof(struct dmabounce_check_entry), GFP_ATOMIC); ++ ++ if (!entry) ++ return ENOMEM; ++ ++ INIT_LIST_HEAD(&entry->list); ++ entry->checker = function; ++ entry->data = data; ++ ++ write_lock_irqsave(&checkers_lock, flags); ++ list_add(&entry->list, &checkers); ++ write_unlock_irqrestore(&checkers_lock, flags); ++ ++ return 0; ++} ++ ++void ++dmabounce_remove_checker(dmabounce_check function, void *data) ++{ ++ unsigned long flags; ++ struct list_head *pos; ++ ++ write_lock_irqsave(&checkers_lock, flags); ++ __list_for_each(pos, &checkers) { ++ struct dmabounce_check_entry *entry = container_of(pos, ++ struct dmabounce_check_entry, list); ++ if (entry->checker == function && entry->data == data) { ++ list_del(pos); ++ write_unlock_irqrestore(&checkers_lock, flags); ++ kfree(entry); ++ return; ++ } ++ } ++ ++ write_unlock_irqrestore(&checkers_lock, flags); ++ printk(KERN_WARNING "dmabounce checker not found: %p\n", function); ++} ++ ++static int dma_needs_bounce(struct device *dev, dma_addr_t dma, size_t size) ++{ ++ unsigned long flags; ++ struct list_head *pos; ++ ++ read_lock_irqsave(&checkers_lock, flags); ++ __list_for_each(pos, &checkers) { ++ struct dmabounce_check_entry *entry = container_of(pos, ++ struct dmabounce_check_entry, list); ++ if (entry->checker(dev, dma, size, entry->data)) { ++ read_unlock_irqrestore(&checkers_lock, flags); ++ return 1; ++ } ++ } ++ ++ read_unlock_irqrestore(&checkers_lock, flags); ++#ifdef CONFIG_PLATFORM_DMABOUNCE ++ return platform_dma_needs_bounce(dev, dma, size); ++#else ++ return 0; ++#endif ++} + #ifdef STATS + static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr, + char *buf) +@@ -239,7 +315,7 @@ map_single(struct device *dev, void *ptr, size_t size, + struct safe_buffer *buf; + + buf = alloc_safe_buffer(device_info, ptr, size, dir); +- if (buf == 0) { ++ if (buf == NULL) { + dev_err(dev, "%s: unable to map unsafe buffer %p!\n", + __func__, ptr); + return 0; +@@ -643,7 +719,6 @@ dmabounce_unregister_dev(struct device *dev) + dev->bus_id, dev->bus->name); + } + +- + EXPORT_SYMBOL(dma_map_single); + EXPORT_SYMBOL(dma_unmap_single); + EXPORT_SYMBOL(dma_map_sg); +@@ -653,6 +728,9 @@ EXPORT_SYMBOL(dma_sync_single_for_device); + EXPORT_SYMBOL(dma_sync_sg); + EXPORT_SYMBOL(dmabounce_register_dev); + EXPORT_SYMBOL(dmabounce_unregister_dev); ++EXPORT_SYMBOL(dmabounce_register_checker); ++EXPORT_SYMBOL(dmabounce_remove_checker); ++ + + MODULE_AUTHOR("Christopher Hoover , Deepak Saxena "); + MODULE_DESCRIPTION("Special dma_{map/unmap/dma_sync}_* routines for systems with limited DMA windows"); +diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c +index eb06d0b..3b8fbdd 100644 +--- a/arch/arm/common/sa1111.c ++++ b/arch/arm/common/sa1111.c +@@ -778,7 +778,7 @@ static void __sa1111_remove(struct sa1111 *sachip) + * This should only get called for sa1111_device types due to the + * way we configure our device dma_masks. + */ +-int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) ++int platform_dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) + { + /* + * Section 4.6 of the "Intel StrongARM SA-1111 Development Module +diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig +index 61b2dfc..5870371 100644 +--- a/arch/arm/mach-ixp4xx/Kconfig ++++ b/arch/arm/mach-ixp4xx/Kconfig +@@ -161,6 +161,7 @@ comment "IXP4xx Options" + config DMABOUNCE + bool + default y ++ select PLATFORM_DMABOUNCE + depends on PCI + + config IXP4XX_INDIRECT_PCI +diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c +index bf04121..ac46492 100644 +--- a/arch/arm/mach-ixp4xx/common-pci.c ++++ b/arch/arm/mach-ixp4xx/common-pci.c +@@ -336,7 +336,7 @@ static int ixp4xx_pci_platform_notify_remove(struct device *dev) + return 0; + } + +-int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) ++int platform_dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) + { + return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M); + } +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch new file mode 100644 index 0000000000..09f0cb946c --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch @@ -0,0 +1,56 @@ +From 688df15bb534519e0698cc8e4a4d9234afd32105 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Fri, 7 Nov 2008 15:50:39 +0300 +Subject: [PATCH] pxa2xx-ac97: switch AC unit to correct state before probing + +If AC97 unit is in partially enabled state, early request_irq can trigger +IRQ storm or even full hang up. Workaround this by forcibly switching ACLINK off +at the start of the probe. + +Signed-off-by: Dmitry Baryshkov +--- + sound/soc/pxa/pxa2xx-ac97.c | 30 +++++++++++++++++------------- + 1 files changed, 17 insertions(+), 13 deletions(-) + +Index: linux-2.6.24/sound/soc/pxa/pxa2xx-ac97.c +=================================================================== +--- linux-2.6.24.orig/sound/soc/pxa/pxa2xx-ac97.c 2008-01-25 01:58:37.000000000 +0300 ++++ linux-2.6.24/sound/soc/pxa/pxa2xx-ac97.c 2008-11-15 20:02:45.396976363 +0300 +@@ -284,10 +284,6 @@ static int pxa2xx_ac97_probe(struct plat + { + int ret; + +- ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL); +- if (ret < 0) +- goto err; +- + pxa_gpio_mode(GPIO31_SYNC_AC97_MD); + pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); + pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); +@@ -296,15 +292,23 @@ static int pxa2xx_ac97_probe(struct plat + /* Use GPIO 113 as AC97 Reset on Bulverde */ + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + #endif ++ GCR = GCR_ACLINK_OFF; ++ + pxa_set_cken(CKEN_AC97, 1); ++ ++ ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL); ++ if (ret < 0) ++ goto err; ++ ++ + return 0; + +- err: +- if (CKEN & (1 << CKEN_AC97)) { ++err: ++/* if (CKEN & (1 << CKEN_AC97)) {*/ + GCR |= GCR_ACLINK_OFF; + free_irq(IRQ_AC97, NULL); + pxa_set_cken(CKEN_AC97, 0); +- } ++/* }*/ + return ret; + } + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0002-Modify-dma_alloc_coherent-on-ARM-so-that-it-supports.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0002-Modify-dma_alloc_coherent-on-ARM-so-that-it-supports.patch new file mode 100644 index 0000000000..a562ef921b --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0002-Modify-dma_alloc_coherent-on-ARM-so-that-it-supports.patch @@ -0,0 +1,260 @@ +From 8e95f90487d2fb46fd862744ddb34f47c30b0c5a Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 4 Jan 2008 18:27:50 +0000 +Subject: [PATCH 02/64] Modify dma_alloc_coherent on ARM so that it supports device local DMA. + +--- + arch/arm/mm/consistent.c | 125 +++++++++++++++++++++++++++++++++++++++++ + include/asm-arm/dma-mapping.h | 37 +++++++------ + 2 files changed, 145 insertions(+), 17 deletions(-) + +diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c +index 333a82a..3da0f94 100644 +--- a/arch/arm/mm/consistent.c ++++ b/arch/arm/mm/consistent.c +@@ -3,6 +3,8 @@ + * + * Copyright (C) 2000-2004 Russell King + * ++ * Device local coherent memory support added by Ian Molton (spyro@f2s.com) ++ * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +@@ -20,6 +22,7 @@ + + #include + #include ++#include + #include + #include + +@@ -35,6 +38,13 @@ + #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) + #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) + ++struct dma_coherent_mem { ++ void *virt_base; ++ u32 device_base; ++ int size; ++ int flags; ++ unsigned long *bitmap; ++}; + + /* + * These are the page tables (2MB each) covering uncached, DMA consistent allocations +@@ -153,6 +163,13 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, + unsigned long order; + u64 mask = ISA_DMA_THRESHOLD, limit; + ++ /* Following is a work-around (a.k.a. hack) to prevent pages ++ * with __GFP_COMP being passed to split_page() which cannot ++ * handle them. The real problem is that this flag probably ++ * should be 0 on ARM as it is not supported on this ++ * platform--see CONFIG_HUGETLB_PAGE. */ ++ gfp &= ~(__GFP_COMP); ++ + if (!consistent_pte[0]) { + printk(KERN_ERR "%s: not initialised\n", __func__); + dump_stack(); +@@ -160,6 +177,26 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, + } + + if (dev) { ++ ++ if (dev->dma_mem) { ++ unsigned long flags; ++ int pgnum; ++ void *ret; ++ ++ spin_lock_irqsave(&consistent_lock, flags); ++ pgnum = bitmap_find_free_region(dev->dma_mem->bitmap, ++ dev->dma_mem->size, ++ get_order(size)); ++ spin_unlock_irqrestore(&consistent_lock, flags); ++ ++ if (pgnum >= 0) { ++ *handle = dev->dma_mem->device_base + (pgnum << PAGE_SHIFT); ++ ret = dev->dma_mem->virt_base + (pgnum << PAGE_SHIFT); ++ memset(ret, 0, size); ++ return ret; ++ } ++ } ++ + mask = dev->coherent_dma_mask; + + /* +@@ -177,6 +214,9 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, + mask, (unsigned long long)ISA_DMA_THRESHOLD); + goto no_page; + } ++ ++ if (dev->dma_mem && dev->dma_mem->flags & DMA_MEMORY_EXCLUSIVE) ++ return NULL; + } + + /* +@@ -359,6 +399,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr + pte_t *ptep; + int idx; + u32 off; ++ struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; ++ unsigned long order; + + WARN_ON(irqs_disabled()); + +@@ -368,6 +410,15 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr + } + + size = PAGE_ALIGN(size); ++ order = get_order(size); ++ ++ /* What if mem is valid and the range is not? */ ++ if (mem && cpu_addr >= mem->virt_base && cpu_addr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { ++ int page = (cpu_addr - mem->virt_base) >> PAGE_SHIFT; ++ ++ bitmap_release_region(mem->bitmap, page, order); ++ return; ++ } + + spin_lock_irqsave(&consistent_lock, flags); + c = vm_region_find(&consistent_head, (unsigned long)cpu_addr); +@@ -437,6 +488,80 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr + } + EXPORT_SYMBOL(dma_free_coherent); + ++int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, ++ dma_addr_t device_addr, size_t size, int flags) ++{ ++ void __iomem *mem_base; ++ int pages = size >> PAGE_SHIFT; ++ int bitmap_size = (pages + 31)/32; ++ ++ if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0) ++ goto out; ++ if (!size) ++ goto out; ++ if (dev->dma_mem) ++ goto out; ++ ++ /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */ ++ mem_base = ioremap_nocache(bus_addr, size); ++ if (!mem_base) ++ goto out; ++ ++ dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL); ++ if (!dev->dma_mem) ++ goto out; ++ memset(dev->dma_mem, 0, sizeof(struct dma_coherent_mem)); ++ dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL); ++ if (!dev->dma_mem->bitmap) ++ goto free1_out; ++ ++ dev->dma_mem->virt_base = mem_base; ++ dev->dma_mem->device_base = device_addr; ++ dev->dma_mem->size = pages; ++ dev->dma_mem->flags = flags; ++ ++ if (flags & DMA_MEMORY_MAP) ++ return DMA_MEMORY_MAP; ++ ++ return DMA_MEMORY_IO; ++ ++ free1_out: ++ kfree(dev->dma_mem->bitmap); ++ out: ++ return 0; ++} ++EXPORT_SYMBOL(dma_declare_coherent_memory); ++ ++void dma_release_declared_memory(struct device *dev) ++{ ++ struct dma_coherent_mem *mem = dev->dma_mem; ++ ++ if (!mem) ++ return; ++ dev->dma_mem = NULL; ++ kfree(mem->bitmap); ++ kfree(mem); ++} ++EXPORT_SYMBOL(dma_release_declared_memory); ++ ++void *dma_mark_declared_memory_occupied(struct device *dev, ++ dma_addr_t device_addr, size_t size) ++{ ++ struct dma_coherent_mem *mem = dev->dma_mem; ++ int pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; ++ int pos, err; ++ ++ if (!mem) ++ return ERR_PTR(-EINVAL); ++ ++ pos = (device_addr - mem->device_base) >> PAGE_SHIFT; ++ err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages)); ++ if (err != 0) ++ return ERR_PTR(err); ++ return mem->virt_base + (pos << PAGE_SHIFT); ++} ++EXPORT_SYMBOL(dma_mark_declared_memory_occupied); ++ + /* + * Initialise the consistent memory allocation. + */ +diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h +index e99406a..f18ba05 100644 +--- a/include/asm-arm/dma-mapping.h ++++ b/include/asm-arm/dma-mapping.h +@@ -7,6 +7,19 @@ + + #include + ++#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY ++extern int ++dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, ++ dma_addr_t device_addr, size_t size, int flags); ++ ++extern void ++dma_release_declared_memory(struct device *dev); ++ ++extern void * ++dma_mark_declared_memory_occupied(struct device *dev, ++ dma_addr_t device_addr, size_t size); ++ ++ + /* + * DMA-consistent mapping functions. These allocate/free a region of + * uncached, unwrite-buffered mapped memory space for use with DMA +@@ -433,23 +446,13 @@ extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long) + */ + extern void dmabounce_unregister_dev(struct device *); + +-/** +- * dma_needs_bounce +- * +- * @dev: valid struct device pointer +- * @dma_handle: dma_handle of unbounced buffer +- * @size: size of region being mapped +- * +- * Platforms that utilize the dmabounce mechanism must implement +- * this function. +- * +- * The dmabounce routines call this function whenever a dma-mapping +- * is requested to determine whether a given buffer needs to be bounced +- * or not. The function must return 0 if the buffer is OK for +- * DMA access and 1 if the buffer needs to be bounced. +- * +- */ +-extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); ++typedef int (*dmabounce_check)(struct device *dev, dma_addr_t dma, size_t size, void *data); ++extern int dmabounce_register_checker(dmabounce_check, void *data); ++extern void dmabounce_remove_checker(dmabounce_check, void *data); ++#ifdef CONFIG_PLATFORM_DMABOUNCE ++extern int platform_dma_needs_bounce(struct device *dev, dma_addr_t dma, size_t size, void *data); ++#endif ++ + #endif /* CONFIG_DMABOUNCE */ + + #endif /* __KERNEL__ */ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0003-Core-MFD-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0003-Core-MFD-support.patch new file mode 100644 index 0000000000..d84a4f7835 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0003-Core-MFD-support.patch @@ -0,0 +1,243 @@ +From a07910753f9965842b6647f0561db125b538f5ed Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 4 Jan 2008 18:32:44 +0000 +Subject: [PATCH 03/64] Core MFD support + +This patch provides a common subdevice registration system for MFD type +chips, using platfrom device. + +It also provides a new resource type for IRQs such that a subdevices IRQ may +be computed based on the MFD cores IRQ handler, since many MFDs provide an IRQ +multiplex. +--- + drivers/mfd/Kconfig | 4 ++ + drivers/mfd/Makefile | 2 + + drivers/mfd/mfd-core.c | 116 ++++++++++++++++++++++++++++++++++++++++++++++ + include/linux/ioport.h | 1 + + include/linux/mfd-core.h | 51 ++++++++++++++++++++ + 5 files changed, 174 insertions(+), 0 deletions(-) + create mode 100644 drivers/mfd/mfd-core.c + create mode 100644 include/linux/mfd-core.h + +diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig +index 2571619..1205c89 100644 +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -5,6 +5,10 @@ + menu "Multifunction device drivers" + depends on HAS_IOMEM + ++config MFD_CORE ++ tristate ++ default n ++ + config MFD_SM501 + tristate "Support for Silicon Motion SM501" + ---help--- +diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile +index 5143209..6c20064 100644 +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -4,6 +4,8 @@ + + obj-$(CONFIG_MFD_SM501) += sm501.o + ++obj-$(CONFIG_MFD_CORE) += mfd-core.o ++ + obj-$(CONFIG_MCP) += mcp-core.o + obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o + obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o +diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c +new file mode 100644 +index 0000000..88874e1 +--- /dev/null ++++ b/drivers/mfd/mfd-core.c +@@ -0,0 +1,116 @@ ++/* ++ * drivers/mfd/mfd-core.c ++ * ++ * core MFD support ++ * Copyright (c) 2006 Ian Molton ++ * Copyright (c) 2007 Dmitry Baryshkov ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++ ++#define SIGNED_SHIFT(val, shift) ((shift) >= 0 ? \ ++ ((val) << (shift)) : \ ++ ((val) >> -(shift))) ++ ++int mfd_add_devices( ++ struct platform_device *parent, ++ const struct mfd_cell *cells, int n_devs, ++ struct resource *mem, ++ int relative_addr_shift, ++ int irq_base) ++{ ++ int i; ++ ++ for (i = 0; i < n_devs; i++) { ++ struct resource *res = NULL; ++ const struct mfd_cell *cell = cells + i; ++ struct platform_device *pdev; ++ int ret = -ENOMEM; ++ int r; ++ ++ pdev = platform_device_alloc(cell->name, -1); ++ if (!pdev) ++ goto fail_alloc; ++ ++ pdev->dev.uevent_suppress = 0; ++ pdev->dev.parent = &parent->dev; ++ ++ ret = platform_device_add_data(pdev, &cell, sizeof(struct mfd_cell *)); ++ if (ret) ++ goto fail_device; ++ ++ res = kzalloc(cell->num_resources * sizeof(struct resource), ++ GFP_KERNEL); ++ if (!res) ++ goto fail_device; ++ ++ for (r = 0; r < cell->num_resources; r++) { ++ res[r].name = cell->resources[r].name; ++ ++ /* Find out base to use */ ++ if (cell->resources[r].flags & IORESOURCE_MEM) { ++ res[r].parent = mem; ++ res[r].start = mem->start + ++ SIGNED_SHIFT(cell->resources[r].start, ++ relative_addr_shift); ++ res[r].end = mem->start + ++ SIGNED_SHIFT(cell->resources[r].end, ++ relative_addr_shift); ++ } else if ((cell->resources[r].flags & IORESOURCE_IRQ) && ++ (cell->resources[r].flags & IORESOURCE_IRQ_MFD_SUBDEVICE)) { ++ res[r].start = irq_base + ++ cell->resources[r].start; ++ res[r].end = irq_base + ++ cell->resources[r].end; ++ } else { ++ res[r].start = cell->resources[r].start; ++ res[r].end = cell->resources[r].end; ++ } ++ ++ res[r].flags = cell->resources[r].flags; ++ } ++ ++ ret = platform_device_add_resources(pdev, ++ res, ++ cell->num_resources); ++ kfree(res); ++ ++ if (ret) ++ goto fail_device; ++ ++ ret = platform_device_add(pdev); ++ ++ if (ret) { ++ platform_device_del(pdev); ++fail_device: ++ platform_device_put(pdev); ++fail_alloc: ++ mfd_remove_devices(parent); ++ return ret; ++ } ++ } ++ return 0; ++} ++EXPORT_SYMBOL(mfd_add_devices); ++ ++static int mfd_remove_devices_fn(struct device *dev, void *unused) ++{ ++ platform_device_unregister(container_of(dev, struct platform_device, dev)); ++ return 0; ++} ++ ++void mfd_remove_devices(struct platform_device *parent) ++{ ++ device_for_each_child(&parent->dev, NULL, mfd_remove_devices_fn); ++} ++EXPORT_SYMBOL(mfd_remove_devices); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov"); +diff --git a/include/linux/ioport.h b/include/linux/ioport.h +index 6187a85..0348c71 100644 +--- a/include/linux/ioport.h ++++ b/include/linux/ioport.h +@@ -56,6 +56,7 @@ struct resource_list { + #define IORESOURCE_IRQ_HIGHLEVEL (1<<2) + #define IORESOURCE_IRQ_LOWLEVEL (1<<3) + #define IORESOURCE_IRQ_SHAREABLE (1<<4) ++#define IORESOURCE_IRQ_MFD_SUBDEVICE (1<<5) + + /* ISA PnP DMA specific bits (IORESOURCE_BITS) */ + #define IORESOURCE_DMA_TYPE_MASK (3<<0) +diff --git a/include/linux/mfd-core.h b/include/linux/mfd-core.h +new file mode 100644 +index 0000000..0e9de78 +--- /dev/null ++++ b/include/linux/mfd-core.h +@@ -0,0 +1,51 @@ ++#ifndef MFD_CORE_H ++#define MFD_CORE_H ++/* ++ * drivers/mfd/mfd-core.h ++ * ++ * core MFD support ++ * Copyright (c) 2006 Ian Molton ++ * Copyright (c) 2007 Dmitry Baryshkov ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++ ++struct mfd_cell { ++ const char *name; ++ ++ int (*enable)(struct platform_device *dev); ++ int (*disable)(struct platform_device *dev); ++ int (*suspend)(struct platform_device *dev); ++ int (*resume)(struct platform_device *dev); ++ ++ void *driver_data; /* data passed to drivers */ ++ ++ /* ++ * This resources can be specified relatievly to the parent device. ++ * For accessing device you should use resources from device ++ */ ++ int num_resources; ++ const struct resource *resources; ++}; ++ ++static inline __maybe_unused struct mfd_cell * ++mfd_get_cell(struct platform_device *pdev) ++{ ++ return *((struct mfd_cell **)(pdev->dev.platform_data)); ++} ++ ++extern int mfd_add_devices( ++ struct platform_device *parent, ++ const struct mfd_cell *cells, int n_devs, ++ struct resource *mem, ++ int relative_addr_shift, ++ int irq_base); ++ ++extern void mfd_remove_devices(struct platform_device *parent); ++ ++#endif +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0004-Add-support-for-tc6393xb-MFD-core.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0004-Add-support-for-tc6393xb-MFD-core.patch new file mode 100644 index 0000000000..a78c0f37f3 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0004-Add-support-for-tc6393xb-MFD-core.patch @@ -0,0 +1,907 @@ +From 3f56cac281fb407b7d8e574d18ee7d72aa7e7c28 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Sat, 29 Dec 2007 15:02:30 +0000 +Subject: [PATCH 04/64] Add support for tc6393xb MFD core + +--- + drivers/mfd/Kconfig | 6 + + drivers/mfd/Makefile | 2 + + drivers/mfd/tc6393xb.c | 740 ++++++++++++++++++++++++++++++++++++++++++ + include/linux/mfd/tc6393xb.h | 108 ++++++ + 4 files changed, 856 insertions(+), 0 deletions(-) + create mode 100644 drivers/mfd/tc6393xb.c + create mode 100644 include/linux/mfd/tc6393xb.h + +diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig +index 1205c89..9903d0a 100644 +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -9,6 +9,12 @@ config MFD_CORE + tristate + default n + ++config MFD_TC6393XB ++ bool "Support Toshiba TC6393XB" ++ select MFD_CORE ++ help ++ Support for Toshiba Mobile IO Controller TC6393XB ++ + config MFD_SM501 + tristate "Support for Silicon Motion SM501" + ---help--- +diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile +index 6c20064..ffd342e 100644 +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -6,6 +6,8 @@ obj-$(CONFIG_MFD_SM501) += sm501.o + + obj-$(CONFIG_MFD_CORE) += mfd-core.o + ++obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o ++ + obj-$(CONFIG_MCP) += mcp-core.o + obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o + obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o +diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c +new file mode 100644 +index 0000000..9439f39 +--- /dev/null ++++ b/drivers/mfd/tc6393xb.c +@@ -0,0 +1,740 @@ ++/* ++ * Toshiba TC6393XB SoC support ++ * ++ * Copyright(c) 2005-2006 Chris Humbert ++ * Copyright(c) 2005 Dirk Opfer ++ * Copyright(c) 2005 Ian Molton ++ * Copyright(c) 2007 Dmitry Baryshkov ++ * ++ * Based on code written by Sharp/Lineo for 2.4 kernels ++ * Based on locomo.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct tc6393xb_scr { ++ u8 x00[8]; ++ u8 revid; /* 0x08 Revision ID */ ++ u8 x01[0x47]; ++ u8 isr; /* 0x50 Interrupt Status */ ++ u8 x02; ++ u8 imr; /* 0x52 Interrupt Mask */ ++ u8 x03; ++ u8 irr; /* 0x54 Interrupt Routing */ ++ u8 x04[0x0b]; ++ u16 gper; /* 0x60 GP Enable */ ++ u8 x05[2]; ++ u16 gpi_sr[2]; /* 0x64 GPI Status */ ++ u16 gpi_imr[2]; /* 0x68 GPI INT Mask */ ++ u16 gpi_eder[2]; /* 0x6c GPI Edge Detect Enable */ ++ u16 gpi_lir[4]; /* 0x70 GPI Level Invert */ ++ u16 gpo_dsr[2]; /* 0x78 GPO Data Set */ ++ u16 gpo_doecr[2]; /* 0x7c GPO Data OE Control */ ++ u16 gp_iarcr[2]; /* 0x80 GP Internal Active Reg Control */ ++ u16 gp_iarlcr[2]; /* 0x84 GP Internal Active Reg Level Con*/ ++ u8 gpi_bcr[4]; /* 0x88 GPI Buffer Control */ ++ u16 gpa_iarcr; /* 0x8c GPa Internal Active Reg Control */ ++ u8 x06[2]; ++ u16 gpa_iarlcr; /* 0x90 GPa Internal Active Reg Level Co*/ ++ u8 x07[2]; ++ u16 gpa_bcr; /* 0x94 GPa Buffer Control */ ++ u8 x08[2]; ++ u16 ccr; /* 0x98 Clock Control */ ++ u16 pll2cr; /* 0x9a PLL2 Control */ ++ u16 pll1cr[2]; /* 0x9c PLL1 Control */ ++ u8 diarcr; /* 0xa0 Device Internal Active Reg Contr*/ ++ u8 dbocr; /* 0xa1 Device Buffer Off Control */ ++ u8 x09[0x3e]; ++ u8 fer; /* 0xe0 Function Enable */ ++ u8 x10[3]; ++ u16 mcr; /* 0xe4 Mode Control */ ++ u8 x11[0x14]; ++ u8 config; /* 0xfc Configuration Control */ ++ u8 x12[2]; ++ u8 debug; /* 0xff Debug */ ++} __attribute__ ((packed)); ++ ++/*--------------------------------------------------------------------------*/ ++ ++struct tc6393xb { ++ struct tc6393xb_scr __iomem *scr; ++ ++ spinlock_t lock; /* protects RMW cycles */ ++ ++ struct { ++ union tc6393xb_scr_fer fer; ++ union tc6393xb_scr_ccr ccr; ++ u8 gpi_bcr[4]; ++ } suspend_state; ++ ++ struct resource rscr; ++ struct resource *iomem; ++ int irq; ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++static int tc6393xb_mmc_enable(struct platform_device *mmc) { ++ struct platform_device *dev = to_platform_device(mmc->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.ck32ken = 1; ++ iowrite16(ccr.raw, &scr->ccr); ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static int tc6393xb_mmc_disable(struct platform_device *mmc) { ++ struct platform_device *dev = to_platform_device(mmc->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.ck32ken = 0; ++ iowrite16(ccr.raw, &scr->ccr); ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++/*--------------------------------------------------------------------------*/ ++ ++static int tc6393xb_nand_disable(struct platform_device *nand) ++{ ++ return 0; ++} ++ ++static int tc6393xb_nand_enable(struct platform_device *nand) ++{ ++ struct platform_device *dev = to_platform_device(nand->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ /* SMD buffer on */ ++ dev_dbg(&dev->dev, "SMD buffer on\n"); ++ iowrite8(0xff, scr->gpi_bcr + 1); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++int tc6393xb_lcd_set_power(struct platform_device *fb, bool on) ++{ ++ struct platform_device *dev = to_platform_device(fb->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_fer fer; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ fer.raw = ioread8(&scr->fer); ++ fer.bits.slcden = on ? 1 : 0; ++ iowrite8(fer.raw, &scr->fer); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++EXPORT_SYMBOL(tc6393xb_lcd_set_power); ++ ++int tc6393xb_lcd_mode(struct platform_device *fb_dev, ++ struct fb_videomode *mode) { ++ struct tc6393xb *tc6393xb = ++ platform_get_drvdata(to_platform_device(fb_dev->dev.parent)); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ ++ iowrite16(mode->pixclock, scr->pll1cr + 0); ++ iowrite16(mode->pixclock >> 16, scr->pll1cr + 1); ++ ++ return 0; ++} ++EXPORT_SYMBOL(tc6393xb_lcd_mode); ++ ++static int tc6393xb_ohci_disable(struct platform_device *ohci) ++{ ++ struct platform_device *dev = to_platform_device(ohci->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ union tc6393xb_scr_fer fer; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ fer.raw = ioread8(&scr->fer); ++ fer.bits.usben = 0; ++ iowrite8(fer.raw, &scr->fer); ++ ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.usbcken = 0; ++ iowrite16(ccr.raw, &scr->ccr); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static int tc6393xb_ohci_enable(struct platform_device *ohci) ++{ ++ struct platform_device *dev = to_platform_device(ohci->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ union tc6393xb_scr_fer fer; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.usbcken = 1; ++ iowrite16(ccr.raw, &scr->ccr); ++ ++ fer.raw = ioread8(&scr->fer); ++ fer.bits.usben = 1; ++ iowrite8(fer.raw, &scr->fer); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static int tc6393xb_fb_disable(struct platform_device *fb) ++{ ++ struct platform_device *dev = to_platform_device(fb->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ union tc6393xb_scr_fer fer; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ /* ++ * FIXME: is this correct or it should be moved to other _disable? ++ */ ++ fer.raw = ioread8(&scr->fer); ++ fer.bits.slcden = 0; ++/* fer.bits.lcdcven = 0; */ ++ iowrite8(fer.raw, &scr->fer); ++ ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.mclksel = disable; ++ iowrite16(ccr.raw, &scr->ccr); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static int tc6393xb_fb_enable(struct platform_device *fb) ++{ ++ struct platform_device *dev = to_platform_device(fb->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.mclksel = m48MHz; ++ iowrite16(ccr.raw, &scr->ccr); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static int tc6393xb_fb_suspend(struct platform_device *fb) ++{ ++ struct platform_device *dev = to_platform_device(fb->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.mclksel = disable; ++ iowrite16(ccr.raw, &scr->ccr); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static int tc6393xb_fb_resume(struct platform_device *fb) ++{ ++ struct platform_device *dev = to_platform_device(fb->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.mclksel = m48MHz; ++ iowrite16(ccr.raw, &scr->ccr); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static struct resource tc6393xb_mmc_resources[] = { ++ { ++ .name = TMIO_MMC_CONTROL, ++ .start = 0x800, ++ .end = 0x9ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_MMC_CONFIG, ++ .start = 0x200, ++ .end = 0x2ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_MMC_IRQ, ++ .start = IRQ_TC6393_MMC, ++ .end = IRQ_TC6393_MMC, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE, ++ }, ++}; ++ ++const static struct resource tc6393xb_nand_resources[] = { ++ { ++ .name = TMIO_NAND_CONFIG, ++ .start = 0x0100, ++ .end = 0x01ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_NAND_CONTROL, ++ .start = 0x1000, ++ .end = 0x1007, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_NAND_IRQ, ++ .start = IRQ_TC6393_NAND, ++ .end = IRQ_TC6393_NAND, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE, ++ }, ++}; ++ ++const static struct resource tc6393xb_ohci_resources[] = { ++ { ++ .name = TMIO_OHCI_CONFIG, ++ .start = 0x0300, ++ .end = 0x03ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_OHCI_CONTROL, ++ .start = 0x3000, ++ .end = 0x31ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_OHCI_SRAM, ++ .start = 0x010000, ++ .end = 0x017fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_OHCI_SRAM_ALIAS, ++ .start = 0x018000, ++ .end = 0x01ffff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_OHCI_IRQ, ++ .start = IRQ_TC6393_OHCI, ++ .end = IRQ_TC6393_OHCI, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE, ++ }, ++}; ++ ++const static struct resource tc6393xb_fb_resources[] = { ++ { ++ .name = TMIO_FB_CONFIG, ++ .start = 0x0500, ++ .end = 0x05ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_FB_CONTROL, ++ .start = 0x5000, ++ .end = 0x51ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_FB_VRAM, ++ .start = 0x100000, ++ .end = 0x1fffff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_FB_IRQ, ++ .start = IRQ_TC6393_FB, ++ .end = IRQ_TC6393_FB, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE, ++ }, ++}; ++ ++static struct mfd_cell tc6393xb_cells[] = { ++ { ++ .name = "tmio-nand", ++ .enable = tc6393xb_nand_enable, ++ .disable = tc6393xb_nand_disable, ++ .num_resources = ARRAY_SIZE(tc6393xb_nand_resources), ++ .resources = tc6393xb_nand_resources, ++ }, ++ { ++ .name = "tmio-ohci", ++ .enable = tc6393xb_ohci_enable, ++ .disable = tc6393xb_ohci_disable, ++ .num_resources = ARRAY_SIZE(tc6393xb_ohci_resources), ++ .resources = tc6393xb_ohci_resources, ++ }, ++ { ++ .name = "tmio-fb", ++ .enable = tc6393xb_fb_enable, ++ .disable = tc6393xb_fb_disable, ++ .suspend = tc6393xb_fb_suspend, ++ .resume = tc6393xb_fb_resume, ++ .num_resources = ARRAY_SIZE(tc6393xb_fb_resources), ++ .resources = tc6393xb_fb_resources, ++ }, ++ { ++ .name = "tmio-mmc", ++ .enable = tc6393xb_mmc_enable, ++ .disable = tc6393xb_mmc_disable, ++ .num_resources = ARRAY_SIZE(tc6393xb_mmc_resources), ++ .resources = tc6393xb_mmc_resources, ++ }, ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++static void ++tc6393xb_irq(unsigned int irq, struct irq_desc *desc) ++{ ++ struct platform_device *dev = get_irq_chip_data(irq); ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ unsigned int isr; ++ unsigned int i; ++ ++ desc->chip->ack(irq); ++ ++ while ((isr = ioread8(&scr->isr) & ~ioread8(&scr->imr))) ++ for (i = 0; i < TC6393XB_NR_IRQS; i++) { ++ if (isr & (1 << i)) ++ desc_handle_irq(tcpd->irq_base + i, ++ irq_desc + tcpd->irq_base + i); ++ } ++} ++ ++static void tc6393xb_irq_ack(unsigned int irq) ++{ ++} ++ ++static void tc6393xb_irq_mask(unsigned int irq) ++{ ++ struct platform_device *dev = get_irq_chip_data(irq); ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ iowrite8(ioread8(&scr->imr) | (1 << (irq - tcpd->irq_base)), ++ &scr->imr); ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++} ++ ++static void tc6393xb_irq_unmask(unsigned int irq) ++{ ++ struct platform_device *dev = get_irq_chip_data(irq); ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ iowrite8(ioread8(&scr->imr) & ~(1 << (irq - tcpd->irq_base)), ++ &scr->imr); ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++} ++ ++static struct irq_chip tc6393xb_chip = { ++ .name = "tc6393xb", ++ .ack = tc6393xb_irq_ack, ++ .mask = tc6393xb_irq_mask, ++ .unmask = tc6393xb_irq_unmask, ++}; ++ ++static void tc6393xb_attach_irq(struct platform_device *dev) ++{ ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ unsigned int irq; ++ ++ for ( ++ irq = tcpd->irq_base; ++ irq <= tcpd->irq_base + TC6393XB_NR_IRQS; ++ irq++) { ++ set_irq_chip(irq, &tc6393xb_chip); ++ set_irq_chip_data(irq, dev); ++ set_irq_handler(irq, handle_edge_irq); ++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ } ++ ++ set_irq_type(tc6393xb->irq, IRQT_FALLING); ++ set_irq_chip_data(tc6393xb->irq, dev); ++ set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq); ++} ++ ++static void tc6393xb_detach_irq(struct platform_device *dev) ++{ ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ unsigned int irq; ++ ++ set_irq_chained_handler(tc6393xb->irq, NULL); ++ set_irq_chip_data(tc6393xb->irq, NULL); ++ ++ for ( ++ irq = tcpd->irq_base; ++ irq <= tcpd->irq_base + TC6393XB_NR_IRQS; ++ irq++) { ++ set_irq_flags(irq, 0); ++ set_irq_chip(irq, NULL); ++ set_irq_chip_data(irq, NULL); ++ } ++} ++ ++static int tc6393xb_hw_init(struct platform_device *dev, int resume) ++{ ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ int ret; ++ int i; ++ ++ if (resume) ++ ret = tcpd->resume(dev); ++ else ++ ret = tcpd->enable(dev); ++ if (ret) ++ return ret; ++ ++ iowrite8(resume ? ++ tc6393xb->suspend_state.fer.raw : ++ 0, &scr->fer); ++ iowrite16(tcpd->scr_pll2cr, &scr->pll2cr); ++ iowrite16(resume? ++ tc6393xb->suspend_state.ccr.raw : ++ tcpd->scr_ccr.raw, &scr->ccr); ++ iowrite16(tcpd->scr_mcr.raw, &scr->mcr); ++ iowrite16(tcpd->scr_gper, &scr->gper); ++ iowrite8(0, &scr->irr); ++ iowrite8(0xbf, &scr->imr); ++ iowrite16(tcpd->scr_gpo_dsr, scr->gpo_dsr + 0); ++ iowrite16(tcpd->scr_gpo_dsr >> 16, scr->gpo_dsr + 1); ++ iowrite16(tcpd->scr_gpo_doecr, scr->gpo_doecr + 0); ++ iowrite16(tcpd->scr_gpo_doecr >> 16, scr->gpo_doecr + 1); ++ ++ if (resume) ++ for (i = 0; i < 4; i++) ++ iowrite8(tc6393xb->suspend_state.gpi_bcr[i], ++ scr->gpi_bcr + i); ++ ++ return 0; ++} ++ ++static int __devinit tc6393xb_probe(struct platform_device *dev) ++{ ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb; ++ struct resource *iomem; ++ struct resource *rscr; ++ int retval; ++ ++ iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); ++ if (!iomem) ++ return -EINVAL; ++ ++ tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL); ++ if (!tc6393xb) { ++ retval = -ENOMEM; ++ goto err_kzalloc; ++ } ++ ++ spin_lock_init(&tc6393xb->lock); ++ ++ platform_set_drvdata(dev, tc6393xb); ++ tc6393xb->iomem = iomem; ++ tc6393xb->irq = platform_get_irq(dev, 0); ++ ++ rscr = &tc6393xb->rscr; ++ rscr->name = "tc6393xb-core"; ++ rscr->start = iomem->start; ++ rscr->end = iomem->start + 0xff; ++ rscr->flags = IORESOURCE_MEM; ++ ++ retval = request_resource(iomem, rscr); ++ if (retval) ++ goto err_request_scr; ++ ++ tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1); ++ if (!tc6393xb->scr) { ++ retval = -ENOMEM; ++ goto err_ioremap; ++ } ++ ++ retval = tc6393xb_hw_init(dev, 0); ++ if (retval) ++ goto err_hw_init; ++ ++ printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n", ++ ioread8(&tc6393xb->scr->revid), ++ (unsigned long) iomem->start, tc6393xb->irq); ++ ++ if (tc6393xb->irq) ++ tc6393xb_attach_irq(dev); ++ ++ tc6393xb_cells[0].driver_data = tcpd->nand_data; ++ tc6393xb_cells[1].driver_data = NULL; /* tcpd->ohci_data; */ ++ tc6393xb_cells[2].driver_data = tcpd->fb_data; ++ ++ retval = mfd_add_devices(dev, ++ tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), ++ iomem, 0, tcpd->irq_base); ++ ++ if (retval == 0) ++ return 0; ++ ++ if (tc6393xb->irq) ++ tc6393xb_detach_irq(dev); ++ ++err_hw_init: ++ iounmap(tc6393xb->scr); ++err_ioremap: ++ release_resource(rscr); ++err_request_scr: ++ kfree(tc6393xb); ++err_kzalloc: ++ release_resource(iomem); ++ return retval; ++} ++ ++static int __devexit tc6393xb_remove(struct platform_device *dev) { ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ int ret; ++ ++ if (tc6393xb->irq) ++ tc6393xb_detach_irq(dev); ++ ++ ret = tcpd->disable(dev); ++ ++ iounmap(tc6393xb->scr); ++ release_resource(&tc6393xb->rscr); ++ release_resource(tc6393xb->iomem); ++ ++ mfd_remove_devices(dev); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ kfree(tc6393xb); ++ ++ return ret; ++} ++ ++#ifdef CONFIG_PM ++static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ int i; ++ ++ ++ tc6393xb->suspend_state.ccr.raw = ioread16(&scr->ccr); ++ tc6393xb->suspend_state.fer.raw = ioread8(&scr->fer); ++ for (i = 0; i < 4; i++) ++ tc6393xb->suspend_state.gpi_bcr[i] = ++ ioread8(scr->gpi_bcr + i); ++ ++ return tcpd->suspend(dev); ++} ++ ++static int tc6393xb_resume(struct platform_device *dev) ++{ ++ return tc6393xb_hw_init(dev, 1); ++} ++#else ++#define tc6393xb_suspend NULL ++#define tc6393xb_resume NULL ++#endif ++ ++static struct platform_driver tc6393xb_driver = { ++ .probe = tc6393xb_probe, ++ .remove = __devexit_p(tc6393xb_remove), ++ .suspend = tc6393xb_suspend, ++ .resume = tc6393xb_resume, ++ ++ .driver = { ++ .name = "tc6393xb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init tc6393xb_init(void) ++{ ++ return platform_driver_register(&tc6393xb_driver); ++} ++ ++static void __exit tc6393xb_exit(void) ++{ ++ platform_driver_unregister(&tc6393xb_driver); ++} ++ ++module_init(tc6393xb_init); ++module_exit(tc6393xb_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer"); ++MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller"); +diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h +new file mode 100644 +index 0000000..e699294 +--- /dev/null ++++ b/include/linux/mfd/tc6393xb.h +@@ -0,0 +1,108 @@ ++/* ++ * Toshiba TC6393XB SoC support ++ * ++ * Copyright(c) 2005-2006 Chris Humbert ++ * Copyright(c) 2005 Dirk Opfer ++ * Copyright(c) 2005 Ian Molton ++ * Copyright(c) 2007 Dmitry Baryshkov ++ * ++ * Based on code written by Sharp/Lineo for 2.4 kernels ++ * Based on locomo.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef TC6393XB_H ++#define TC6393XB_H ++ ++#include ++#include ++ ++union tc6393xb_scr_fer { ++ u8 raw; ++struct { ++ unsigned usben:1; /* D0 USB enable */ ++ unsigned lcdcven:1; /* D1 polysylicon TFT enable */ ++ unsigned slcden:1; /* D2 SLCD enable */ ++} __attribute__ ((packed)) bits; ++} __attribute__ ((packed)); ++ ++union tc6393xb_scr_ccr { ++ u16 raw; ++struct { ++ unsigned ck32ken:1; /* D0 SD host clock enable */ ++ unsigned usbcken:1; /* D1 USB host clock enable */ ++ unsigned x00:2; ++ unsigned sharp:1; /* D4 ??? set in Sharp's code */ ++ unsigned x01:3; ++ enum { disable = 0, ++ m12MHz = 1, ++ m24MHz = 2, ++ m48MHz = 3, ++ } mclksel:3; /* D10-D8 LCD controller clock */ ++ unsigned x02:1; ++ enum { h24MHz = 0, ++ h48MHz = 1, ++ } hclksel:2; /* D13-D12 host bus clock */ ++ unsigned x03:2; ++} __attribute__ ((packed)) bits; ++} __attribute__ ((packed)); ++ ++enum pincontrol { ++ opendrain = 0, ++ tristate = 1, ++ pushpull = 2, ++ /* reserved = 3, */ ++}; ++ ++union tc6393xb_scr_mcr { ++ u16 raw; ++struct { ++ enum pincontrol rdyst:2; /* D1-D0 HRDY control */ ++ unsigned x00:1; ++ unsigned aren:1; /* D3 HRDY pull up resistance cut off */ ++ enum pincontrol intst:2; /* D5-D4 #HINT control */ ++ unsigned x01:1; ++ unsigned aien:1; /* D7 #HINT pull up resitance cut off */ ++ unsigned x02:8; ++} __attribute__ ((packed)) bits; ++} __attribute__ ((packed)); ++ ++struct tc6393xb_platform_data { ++ u16 scr_pll2cr; /* PLL2 Control */ ++ union tc6393xb_scr_ccr scr_ccr; /* Clock Control */ ++ union tc6393xb_scr_mcr scr_mcr; /* Mode Control */ ++ u16 scr_gper; /* GP Enable */ ++ u32 scr_gpo_doecr; /* GPO Data OE Control */ ++ u32 scr_gpo_dsr; /* GPO Data Set */ ++ ++ int (*enable)(struct platform_device *dev); ++ int (*disable)(struct platform_device *dev); ++ int (*suspend)(struct platform_device *dev); ++ int (*resume)(struct platform_device *dev); ++ ++ int irq_base; /* a base for cascaded irq */ ++ ++ struct tmio_nand_data *nand_data; ++ struct tmio_fb_data *fb_data; ++}; ++ ++extern int tc6393xb_lcd_set_power(struct platform_device *fb_dev, bool on); ++extern int tc6393xb_lcd_mode(struct platform_device *fb_dev, ++ struct fb_videomode *mode); ++ ++ ++/* ++ * Relative to irq_base ++ */ ++#define IRQ_TC6393_NAND 0 ++#define IRQ_TC6393_MMC 1 ++#define IRQ_TC6393_OHCI 2 ++#define IRQ_TC6393_SERIAL 3 ++#define IRQ_TC6393_FB 4 ++ ++#define TC6393XB_NR_IRQS 8 ++ ++#endif +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0005-Add-support-for-tc6387xb-MFD-core.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0005-Add-support-for-tc6387xb-MFD-core.patch new file mode 100644 index 0000000000..7183e3af6d --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0005-Add-support-for-tc6387xb-MFD-core.patch @@ -0,0 +1,249 @@ +From a6a6faf1dbb90c950fe55a1719720457bfb5830a Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Sun, 16 Dec 2007 02:19:49 +0000 +Subject: [PATCH 05/64] Add support for tc6387xb MFD core + +--- + drivers/mfd/Kconfig | 6 ++ + drivers/mfd/Makefile | 1 + + drivers/mfd/tc6387xb.c | 163 ++++++++++++++++++++++++++++++++++++++++++ + include/linux/mfd/tc6387xb.h | 28 +++++++ + 4 files changed, 198 insertions(+), 0 deletions(-) + create mode 100644 drivers/mfd/tc6387xb.c + create mode 100644 include/linux/mfd/tc6387xb.h + +diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig +index 9903d0a..1575323 100644 +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -9,6 +9,12 @@ config MFD_CORE + tristate + default n + ++config MFD_TC6387XB ++ bool "Support Toshiba TC6387XB" ++ select MFD_CORE ++ help ++ Support for Toshiba Mobile IO Controller TC6387XB ++ + config MFD_TC6393XB + bool "Support Toshiba TC6393XB" + select MFD_CORE +diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile +index ffd342e..41b2190 100644 +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -6,6 +6,7 @@ obj-$(CONFIG_MFD_SM501) += sm501.o + + obj-$(CONFIG_MFD_CORE) += mfd-core.o + ++obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o + obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o + + obj-$(CONFIG_MCP) += mcp-core.o +diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c +new file mode 100644 +index 0000000..c81fca2 +--- /dev/null ++++ b/drivers/mfd/tc6387xb.c +@@ -0,0 +1,163 @@ ++/* ++ * Toshiba TC6387XB support ++ * Copyright (c) 2005 Ian Molton ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This file contains TC6387XB base support. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++ ++#ifdef CONFIG_PM ++static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev); ++ ++ if (pdata && pdata->suspend) ++ pdata->suspend(dev); ++ ++ return 0; ++} ++ ++static int tc6387xb_resume(struct platform_device *dev) ++{ ++ struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev); ++ ++ if (pdata && pdata->resume) ++ pdata->resume(dev); ++ ++ return 0; ++} ++#else ++#define tc6387xb_suspend NULL ++#define tc6387xb_resume NULL ++#endif ++ ++/*--------------------------------------------------------------------------*/ ++ ++static int tc6387xb_mmc_enable(struct platform_device *mmc) { ++ struct platform_device *dev = to_platform_device(mmc->dev.parent); ++ struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data; ++ ++ if(tc6387xb->enable_mmc_clock) ++ tc6387xb->enable_mmc_clock(dev); ++ ++ return 0; ++} ++ ++static int tc6387xb_mmc_disable(struct platform_device *mmc) { ++ struct platform_device *dev = to_platform_device(mmc->dev.parent); ++ struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data; ++ ++ if(tc6387xb->disable_mmc_clock) ++ tc6387xb->disable_mmc_clock(dev); ++ ++ return 0; ++} ++ ++ ++/*--------------------------------------------------------------------------*/ ++ ++static struct resource tc6387xb_mmc_resources[] = { ++ { ++ .name = TMIO_MMC_CONTROL, ++ .start = 0x800, ++ .end = 0x9ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_MMC_CONFIG, ++ .start = 0x200, ++ .end = 0x2ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_MMC_IRQ, ++ .start = 0, ++ .end = 0, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE, ++ }, ++}; ++ ++static struct mfd_cell tc6387xb_cells[] = { ++ { ++ .name = "tmio-mmc", ++ .enable = tc6387xb_mmc_enable, ++ .disable = tc6387xb_mmc_disable, ++ .num_resources = ARRAY_SIZE(tc6387xb_mmc_resources), ++ .resources = tc6387xb_mmc_resources, ++ }, ++}; ++ ++static int tc6387xb_probe(struct platform_device *dev) ++{ ++ struct tc6387xb_platform_data *data = platform_get_drvdata(dev); ++ struct resource *iomem; ++ int irq; ++ ++ iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); ++ if (!iomem) ++ return -EINVAL; ++ ++ irq = platform_get_irq(dev, 0); ++ ++ if(data && data->enable) ++ data->enable(dev); ++ ++ printk(KERN_INFO "Toshiba tc6393xb initialised\n"); ++ ++ return mfd_add_devices(dev, tc6387xb_cells, ARRAY_SIZE(tc6387xb_cells), ++ iomem, 0, irq); ++} ++ ++static int tc6387xb_remove(struct platform_device *dev) ++{ ++ struct tc6387xb_platform_data *data = platform_get_drvdata(dev); ++ ++ if(data && data->disable) ++ data->disable(dev); ++ ++ return 0; ++} ++ ++ ++static struct platform_driver tc6387xb_platform_driver = { ++ .driver = { ++ .name = "tc6387xb", ++ }, ++ .probe = tc6387xb_probe, ++ .remove = tc6387xb_remove, ++ .suspend = tc6387xb_suspend, ++ .resume = tc6387xb_resume, ++}; ++ ++ ++static int __init tc6387xb_init(void) ++{ ++ return platform_driver_register (&tc6387xb_platform_driver); ++} ++ ++static void __exit tc6387xb_exit(void) ++{ ++ platform_driver_unregister(&tc6387xb_platform_driver); ++} ++ ++module_init(tc6387xb_init); ++module_exit(tc6387xb_exit); ++ ++MODULE_DESCRIPTION("Toshiba TC6387XB core driver"); ++MODULE_LICENSE("GPLv2"); ++MODULE_AUTHOR("Ian Molton"); +diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h +new file mode 100644 +index 0000000..496770b +--- /dev/null ++++ b/include/linux/mfd/tc6387xb.h +@@ -0,0 +1,28 @@ ++/* ++ * linux/include/asm-arm/hardware/tc6387xb.h ++ * ++ * This file contains the definitions for the TC6393XB ++ * ++ * (C) Copyright 2005 Ian Molton ++ * ++ * May be copied or modified under the terms of the GNU General Public ++ * License. See linux/COPYING for more information. ++ * ++ */ ++#ifndef MFD_T7L66XB_H ++#define MFD_T7L66XB_H ++ ++#include ++#include ++ ++struct tc6387xb_platform_data ++{ ++ int (*enable_mmc_clock)(struct platform_device *dev); ++ int (*disable_mmc_clock)(struct platform_device *dev); ++ int (*enable)(struct platform_device *dev); ++ int (*disable)(struct platform_device *dev); ++ int (*suspend)(struct platform_device *dev); ++ int (*resume)(struct platform_device *dev); ++}; ++ ++#endif +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0006-Add-support-for-t7l66xb-MFD-core.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0006-Add-support-for-t7l66xb-MFD-core.patch new file mode 100644 index 0000000000..e7aff2455b --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0006-Add-support-for-t7l66xb-MFD-core.patch @@ -0,0 +1,653 @@ +From 2e31fea352ca97988452f1f2c94809de2977ce40 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Sat, 29 Dec 2007 15:08:52 +0000 +Subject: [PATCH 06/64] Add support for t7l66xb MFD core + +--- + drivers/mfd/Kconfig | 6 + + drivers/mfd/Makefile | 1 + + drivers/mfd/t7l66xb.c | 550 +++++++++++++++++++++++++++++++++++++++++++ + include/linux/mfd/t7l66xb.h | 45 ++++ + 4 files changed, 602 insertions(+), 0 deletions(-) + create mode 100644 drivers/mfd/t7l66xb.c + create mode 100644 include/linux/mfd/t7l66xb.h + +diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig +index 1575323..f79a969 100644 +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -9,6 +9,12 @@ config MFD_CORE + tristate + default n + ++config MFD_T7L66XB ++ bool "Support Toshiba T7L66XB" ++ select MFD_CORE ++ help ++ Support for Toshiba Mobile IO Controller T7L66XB ++ + config MFD_TC6387XB + bool "Support Toshiba TC6387XB" + select MFD_CORE +diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile +index 41b2190..b2037ae 100644 +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -6,6 +6,7 @@ obj-$(CONFIG_MFD_SM501) += sm501.o + + obj-$(CONFIG_MFD_CORE) += mfd-core.o + ++obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o + obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o + obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o + +diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c +new file mode 100644 +index 0000000..308776a +--- /dev/null ++++ b/drivers/mfd/t7l66xb.c +@@ -0,0 +1,550 @@ ++/* ++ * ++ * Toshiba T7L66XB core mfd support ++ * ++ * Copyright (c) 2005 Ian Molton ++ * Copyright (c) 2007 Ian Molton ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * T7L66 features: ++ * ++ * Supported in this driver: ++ * SD/MMC ++ * SM/NAND flash controller ++ * OHCI controller ++ * ++ * As yet not supported ++ * GPIO interface (on NAND pins) ++ * Serial interface ++ * TFT 'interface converter' ++ * PCMCIA interface logic ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++union t7l66xb_dev_ctl { ++ u8 raw; ++struct { ++ unsigned usb_en:1; /* D0 USB enable */ ++ unsigned mmc_en:1; /* D1 MMC enable */ ++} __attribute__ ((packed)); ++} __attribute__ ((packed)); ++ ++ ++struct t7l66xb_scr { ++ u8 x00[8]; ++ u8 revid; /* 0x08 Revision ID */ ++ u8 x01[57]; ++ u8 imr; /* 0x42 Interrupt Mask */ ++ u8 x03[157]; ++ union t7l66xb_dev_ctl dev_ctl; /* 0xe0 Device control */ ++ u8 isr; /* 0xe1 Interrupt Status */ ++ u8 x04[14]; ++ u8 gpio_output_ctl; /* 0xf0 */ ++ u8 gpio_output_status; /* 0xf1 */ ++ u16 gpio_input_status; /* 0xf2 */ ++ u8 x05[4]; ++ u8 active_pullup_down_ctl; /* 0xf8 */ ++ u8 x06[7]; ++} __attribute__ ((packed)); ++ ++ ++/*--------------------------------------------------------------------------*/ ++ ++struct t7l66xb ++{ ++ struct t7l66xb_scr __iomem *scr; ++ spinlock_t lock; ++ ++ struct resource rscr; ++ struct resource *iomem; ++ int irq; ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++static int t7l66xb_ohci_enable(struct platform_device *ohci) ++{ ++ struct platform_device *dev = to_platform_device(ohci->dev.parent); ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned long flags; ++ union t7l66xb_dev_ctl dev_ctl; ++ ++ spin_lock_irqsave(&t7l66xb->lock, flags); ++ ++ dev_ctl.raw = readb(&scr->dev_ctl); ++ dev_ctl.usb_en = 1; ++ writeb(dev_ctl.raw, &scr->dev_ctl); ++ ++ spin_unlock_irqrestore(&t7l66xb->lock, flags); ++ ++ return 0; ++} ++ ++static int t7l66xb_ohci_disable(struct platform_device *ohci) ++{ ++ struct platform_device *dev = to_platform_device(ohci->dev.parent); ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned long flags; ++ union t7l66xb_dev_ctl dev_ctl; ++ ++ spin_lock_irqsave(&t7l66xb->lock, flags); ++ ++ dev_ctl.raw = readb(&scr->dev_ctl); ++ dev_ctl.usb_en = 0; ++ writeb(dev_ctl.raw, &scr->dev_ctl); ++ ++ spin_unlock_irqrestore(&t7l66xb->lock, flags); ++ ++ return 0; ++} ++ ++/*--------------------------------------------------------------------------*/ ++ ++static int t7l66xb_mmc_enable(struct platform_device *ohci) ++{ ++ struct platform_device *dev = to_platform_device(ohci->dev.parent); ++ struct t7l66xb_platform_data *pdata = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned long flags; ++ union t7l66xb_dev_ctl dev_ctl; ++ ++ spin_lock_irqsave(&t7l66xb->lock, flags); ++ ++ if(pdata->enable_clk32k) ++ pdata->enable_clk32k(dev); ++ dev_ctl.raw = readb(&scr->dev_ctl); ++ dev_ctl.mmc_en = 1; ++ writeb(dev_ctl.raw, &scr->dev_ctl); ++ ++ spin_unlock_irqrestore(&t7l66xb->lock, flags); ++ ++ return 0; ++} ++ ++static int t7l66xb_mmc_disable(struct platform_device *ohci) ++{ ++ struct platform_device *dev = to_platform_device(ohci->dev.parent); ++ struct t7l66xb_platform_data *pdata = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned long flags; ++ union t7l66xb_dev_ctl dev_ctl; ++ ++ spin_lock_irqsave(&t7l66xb->lock, flags); ++ ++ dev_ctl.raw = readb(&scr->dev_ctl); ++ dev_ctl.mmc_en = 0; ++ writeb(dev_ctl.raw, &scr->dev_ctl); ++ if(pdata->disable_clk32k) ++ pdata->disable_clk32k(dev); ++ ++ spin_unlock_irqrestore(&t7l66xb->lock, flags); ++ ++ return 0; ++} ++ ++/*--------------------------------------------------------------------------*/ ++ ++static int t7l66xb_nand_disable(struct platform_device *nand) ++{ ++ struct platform_device *dev = to_platform_device(nand->dev.parent); ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned long flags; ++ union t7l66xb_dev_ctl dev_ctl; ++ ++ spin_lock_irqsave(&t7l66xb->lock, flags); ++ ++ dev_ctl.raw = readb(&scr->dev_ctl); ++// dev_ctl.nand_en = 0; ++ writeb(dev_ctl.raw, &scr->dev_ctl); ++ ++ spin_unlock_irqrestore(&t7l66xb->lock, flags); ++ ++ return 0; ++} ++ ++static int t7l66xb_nand_enable(struct platform_device *nand) ++{ ++ struct platform_device *dev = to_platform_device(nand->dev.parent); ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned long flags; ++ union t7l66xb_dev_ctl dev_ctl; ++ ++ spin_lock_irqsave(&t7l66xb->lock, flags); ++ ++ dev_ctl.raw = readb(&scr->dev_ctl); ++ // dev_ctl.nand_en = 1; ++ writeb(dev_ctl.raw, &scr->dev_ctl); ++ ++ spin_unlock_irqrestore(&t7l66xb->lock, flags); ++ ++ return 0; ++} ++ ++/*--------------------------------------------------------------------------*/ ++ ++const static struct resource t7l66xb_mmc_resources[] = { ++ { ++ .name = TMIO_MMC_CONTROL, ++ .start = 0x800, ++ .end = 0x9ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_MMC_CONFIG, ++ .start = 0x200, ++ .end = 0x2ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_MMC_IRQ, ++ .start = IRQ_T7L66XB_MMC, ++ .end = IRQ_T7L66XB_MMC, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE, ++ }, ++}; ++ ++const static struct resource t7l66xb_ohci_resources[] = { ++ { ++ .name = TMIO_OHCI_CONFIG, ++ .start = 0x0300, ++ .end = 0x03ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_OHCI_CONTROL, ++ .start = 0xa00, ++ .end = 0xbff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_OHCI_SRAM, ++ .start = 0x01000, ++ .end = 0x02fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_OHCI_IRQ, ++ .start = IRQ_T7L66XB_OHCI, ++ .end = IRQ_T7L66XB_OHCI, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE, ++ }, ++}; ++ ++const static struct resource t7l66xb_nand_resources[] = { ++ { ++ .name = TMIO_NAND_CONFIG, ++ .start = 0x0100, ++ .end = 0x01ff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_NAND_CONTROL, ++ .start = 0xc00, ++ .end = 0xc07, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = TMIO_NAND_IRQ, ++ .start = IRQ_T7L66XB_NAND, ++ .end = IRQ_T7L66XB_NAND, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_MFD_SUBDEVICE, ++ }, ++}; ++ ++static struct mfd_cell t7l66xb_cells[] = { ++ { ++ .name = "tmio-mmc", ++ .enable = t7l66xb_mmc_enable, ++ .disable = t7l66xb_mmc_disable, ++ .num_resources = ARRAY_SIZE(t7l66xb_mmc_resources), ++ .resources = t7l66xb_mmc_resources, ++ }, ++ { ++ .name = "tmio-ohci", ++ .enable = t7l66xb_ohci_enable, ++ .disable = t7l66xb_ohci_disable, ++ .num_resources = ARRAY_SIZE(t7l66xb_ohci_resources), ++ .resources = t7l66xb_ohci_resources, ++ }, ++ { ++ .name = "tmio-nand", ++ .enable = t7l66xb_nand_enable, ++ .disable = t7l66xb_nand_disable, ++ .num_resources = ARRAY_SIZE(t7l66xb_nand_resources), ++ .resources = t7l66xb_nand_resources, ++ }, ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++/* Handle the T7L66XB interrupt mux */ ++static void t7l66xb_irq(unsigned int irq, struct irq_desc *desc) ++{ ++ struct platform_device *dev = get_irq_chip_data(irq); ++ struct t7l66xb_platform_data *tcpd = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned int isr; ++ unsigned int i; ++ ++ desc->chip->ack(irq); ++ while ((isr = readb(&scr->isr) & ~readb(&scr->imr))) ++ for (i = 0; i < T7L66XB_NR_IRQS; i++) ++ if (isr & (1 << i)) ++ desc_handle_irq(tcpd->irq_base + i, ++ irq_desc + tcpd->irq_base + i); ++} ++ ++static void t7l66xb_irq_mask(unsigned int irq) ++{ ++ struct platform_device *dev = get_irq_chip_data(irq); ++ struct t7l66xb_platform_data *tcpd = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&t7l66xb->lock, flags); ++ iowrite8(ioread8(&scr->imr) | (1 << (irq - tcpd->irq_base)), ++ &scr->imr); ++ spin_unlock_irqrestore(&t7l66xb->lock, flags); ++} ++ ++static void t7l66xb_irq_unmask(unsigned int irq) ++{ ++ struct platform_device *dev = get_irq_chip_data(irq); ++ struct t7l66xb_platform_data *tcpd = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ struct t7l66xb_scr __iomem *scr = t7l66xb->scr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&t7l66xb->lock, flags); ++ iowrite8(ioread8(&scr->imr) & ~(1 << (irq - tcpd->irq_base)), ++ &scr->imr); ++ spin_unlock_irqrestore(&t7l66xb->lock, flags); ++} ++ ++static struct irq_chip t7l66xb_chip = { ++ .name = "t7l66xb", ++ .ack = t7l66xb_irq_mask, ++ .mask = t7l66xb_irq_mask, ++ .unmask = t7l66xb_irq_unmask, ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++/* Install the IRQ handler */ ++static void t7l66xb_attach_irq(struct platform_device *dev) ++{ ++ struct t7l66xb_platform_data *tcpd = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ unsigned int irq; ++ ++ for ( ++ irq = tcpd->irq_base; ++ irq <= tcpd->irq_base + T7L66XB_NR_IRQS; ++ irq++) { ++ set_irq_chip (irq, &t7l66xb_chip); ++ set_irq_chip_data (irq, dev); ++ set_irq_handler(irq, handle_level_irq); ++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ } ++ ++ set_irq_type (t7l66xb->irq, IRQT_FALLING); ++ set_irq_chip_data (t7l66xb->irq, dev); ++ set_irq_chained_handler (t7l66xb->irq, t7l66xb_irq); ++} ++ ++static void t7l66xb_detach_irq(struct platform_device *dev) ++{ ++ struct t7l66xb_platform_data *tcpd = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ unsigned int irq; ++ ++ set_irq_chained_handler(t7l66xb->irq, NULL); ++ set_irq_chip_data(t7l66xb->irq, NULL); ++ ++ for ( ++ irq = tcpd->irq_base; ++ irq <= tcpd->irq_base + T7L66XB_NR_IRQS; ++ irq++) { ++ set_irq_flags(irq, 0); ++ set_irq_chip(irq, NULL); ++ set_irq_chip_data(irq, NULL); ++ } ++} ++ ++/*--------------------------------------------------------------------------*/ ++ ++#ifdef CONFIG_PM ++static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct t7l66xb_platform_data *pdata = dev->dev.platform_data; ++ ++ ++ if (pdata && pdata->suspend) ++ pdata->suspend(dev); ++ ++ return 0; ++} ++ ++static int t7l66xb_resume(struct platform_device *dev) ++{ ++ struct t7l66xb_platform_data *pdata = dev->dev.platform_data; ++ ++ if (pdata && pdata->resume) ++ pdata->resume(dev); ++ ++ return 0; ++} ++#else ++#define t7l66xb_suspend NULL ++#define t7l66xb_resume NULL ++#endif ++ ++/*--------------------------------------------------------------------------*/ ++ ++static int t7l66xb_probe(struct platform_device *dev) ++{ ++ struct t7l66xb_platform_data *pdata = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb; ++ struct resource *iomem; ++ struct resource *rscr; ++ int retval = -ENOMEM; ++ ++ iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); ++ if (!iomem) ++ return -EINVAL; ++ ++ t7l66xb = kzalloc (sizeof *t7l66xb, GFP_KERNEL); ++ if (!t7l66xb) ++ goto err_kzalloc; ++ ++ spin_lock_init(&t7l66xb->lock); ++ ++ platform_set_drvdata(dev, t7l66xb); ++ t7l66xb->iomem = iomem; ++ t7l66xb->irq = platform_get_irq(dev, 0); ++ ++ rscr = &t7l66xb->rscr; ++ rscr->name = "t7l66xb-core"; ++ rscr->start = iomem->start; ++ rscr->end = iomem->start + 0xff; ++ rscr->flags = IORESOURCE_MEM; ++ ++ if((retval = request_resource(iomem, rscr))) ++ goto err_request_scr; ++ ++ t7l66xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1); ++ if (!t7l66xb->scr) { ++ retval = -ENOMEM; ++ goto err_ioremap; ++ } ++ ++ if (pdata && pdata->enable) ++ pdata->enable(dev); ++ ++ writeb(0xbf, &t7l66xb->scr->imr); /* Mask all interrupts */ ++ ++ printk(KERN_INFO "%s rev %d @ 0x%08lx, irq %d\n", ++ dev->name, readb(&t7l66xb->scr->revid), ++ (unsigned long)t7l66xb->scr, t7l66xb->irq); ++ ++ if(t7l66xb->irq) ++ t7l66xb_attach_irq(dev); ++ ++ t7l66xb_cells[2].driver_data = pdata->nand_data; ++ ++ if(!(retval = mfd_add_devices(dev, t7l66xb_cells, ++ ARRAY_SIZE(t7l66xb_cells), ++ iomem, 0, pdata->irq_base))) ++ return 0; ++ ++ if(t7l66xb->irq) ++ t7l66xb_detach_irq(dev); ++ ++ iounmap(t7l66xb->scr); ++err_ioremap: ++ release_resource(rscr); ++err_request_scr: ++ kfree(t7l66xb); ++err_kzalloc: ++ release_resource(iomem); ++ return retval; ++} ++ ++static int t7l66xb_remove(struct platform_device *dev) ++{ ++ struct t7l66xb_platform_data *pdata = dev->dev.platform_data; ++ struct t7l66xb *t7l66xb = platform_get_drvdata(dev); ++ int ret; ++ ++ if (t7l66xb->irq) ++ t7l66xb_detach_irq(dev); ++ ++ ret = pdata->disable(dev); ++ ++ iounmap(t7l66xb->scr); ++ release_resource(&t7l66xb->rscr); ++ release_resource(t7l66xb->iomem); ++ ++ mfd_remove_devices(dev); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ kfree(t7l66xb); ++ ++ return ret; ++ ++} ++ ++static struct platform_driver t7l66xb_platform_driver = { ++ .driver = { ++ .name = "t7l66xb", ++ .owner = THIS_MODULE, ++ }, ++ .suspend = t7l66xb_suspend, ++ .resume = t7l66xb_resume, ++ .probe = t7l66xb_probe, ++ .remove = t7l66xb_remove, ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++static int __init t7l66xb_init(void) ++{ ++ int retval = 0; ++ ++ retval = platform_driver_register (&t7l66xb_platform_driver); ++ return retval; ++} ++ ++static void __exit t7l66xb_exit(void) ++{ ++ platform_driver_unregister(&t7l66xb_platform_driver); ++} ++ ++module_init(t7l66xb_init); ++module_exit(t7l66xb_exit); ++ ++MODULE_DESCRIPTION("Toshiba T7L66XB core driver"); ++MODULE_LICENSE("GPLv2"); ++MODULE_AUTHOR("Ian Molton"); ++ +diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h +new file mode 100644 +index 0000000..06b8de5 +--- /dev/null ++++ b/include/linux/mfd/t7l66xb.h +@@ -0,0 +1,45 @@ ++/* ++ * linux/include/asm-arm/hardware/t7l66xb.h ++ * ++ * This file contains the definitions for the T7L66XB ++ * ++ * (C) Copyright 2005 Ian Molton ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef _ASM_ARCH_T7L66XB_SOC ++#define _ASM_ARCH_T7L66XB_SOC ++ ++#include ++#include ++ ++ ++struct t7l66xb_platform_data ++{ ++ int (*enable_clk32k)(struct platform_device *dev); ++ int (*disable_clk32k)(struct platform_device *dev); ++ ++ int (*enable)(struct platform_device *dev); ++ int (*disable)(struct platform_device *dev); ++ int (*suspend)(struct platform_device *dev); ++ int (*resume)(struct platform_device *dev); ++ ++ int irq_base; /* a base for cascaded irq */ ++ ++ struct tmio_nand_data *nand_data; ++}; ++ ++ ++#define T7L66XB_NAND_CNF_BASE (0x000100) ++#define T7L66XB_NAND_CTL_BASE (0x001000) ++ ++#define IRQ_T7L66XB_NAND (3) ++#define IRQ_T7L66XB_MMC (1) ++#define IRQ_T7L66XB_OHCI (2) ++ ++#define T7L66XB_NR_IRQS 8 ++ ++#endif +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0007-Common-headers-for-TMIO-MFD-subdevices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0007-Common-headers-for-TMIO-MFD-subdevices.patch new file mode 100644 index 0000000000..2f5f11400c --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0007-Common-headers-for-TMIO-MFD-subdevices.patch @@ -0,0 +1,81 @@ +From d6e8b347dbcce9e0e8d2204b774c1c33cfcb483e Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Sat, 29 Dec 2007 15:27:43 +0000 +Subject: [PATCH 07/64] Common headers for TMIO MFD subdevices + +--- + include/linux/mfd/tmio.h | 62 ++++++++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 62 insertions(+), 0 deletions(-) + create mode 100644 include/linux/mfd/tmio.h + +diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h +new file mode 100644 +index 0000000..b42a4c3 +--- /dev/null ++++ b/include/linux/mfd/tmio.h +@@ -0,0 +1,62 @@ ++#ifndef MFD_TMIO_H ++#define MFD_TMIO_H ++ ++#include ++#include ++ ++struct fb_videomode; ++ ++/* ++ * data for the NAND controller ++ */ ++struct tmio_nand_data { ++ struct nand_bbt_descr *badblock_pattern; ++ struct mtd_partition *partition; ++ unsigned int num_partitions; ++}; ++ ++struct tmio_fb_data { ++ int (*lcd_set_power)(struct platform_device *fb_dev, ++ bool on); ++ int (*lcd_mode)(struct platform_device *fb_dev, ++ struct fb_videomode *mode); ++ int num_modes; ++ struct fb_videomode *modes; ++}; ++ ++static u32 __maybe_unused tmio_ioread32(const void __iomem *addr) ++{ ++ return ((u32) ioread16(addr)) | (((u32) ioread16(addr + 2)) << 16); ++} ++ ++static u32 __maybe_unused tmio_iowrite32(u32 val, const void __iomem *addr) ++{ ++ iowrite16(val, addr); ++ iowrite16(val >> 16, addr + 2); ++ return val; ++} ++ ++#define FBIO_TMIO_ACC_WRITE 0x7C639300 ++#define FBIO_TMIO_ACC_SYNC 0x7C639301 ++ ++#define TMIO_MMC_CONFIG "tmio-mmc-config" ++#define TMIO_MMC_CONTROL "tmio-mmc-control" ++#define TMIO_MMC_IRQ "tmio-mmc" ++ ++#define TMIO_NAND_CONFIG "tmio-nand-config" ++#define TMIO_NAND_CONTROL "tmio-nand-control" ++#define TMIO_NAND_IRQ "tmio-nand" ++ ++#define TMIO_FB_CONFIG "tmio-fb-config" ++#define TMIO_FB_CONTROL "tmio-fb-control" ++#define TMIO_FB_VRAM "tmio-fb-vram" ++#define TMIO_FB_IRQ "tmio-fb" ++ ++#define TMIO_OHCI_CONFIG "tmio-ohci-config" ++#define TMIO_OHCI_CONTROL "tmio-ohci-control" ++#define TMIO_OHCI_SRAM "tmio-ohci-sram" ++#define TMIO_OHCI_SRAM_ALIAS "tmio-ohci-sram-alias" ++#define TMIO_OHCI_IRQ "tmio-ohci" ++ ++#endif ++ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0008-Nand-driver-for-TMIO-devices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0008-Nand-driver-for-TMIO-devices.patch new file mode 100644 index 0000000000..48b8000ab7 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0008-Nand-driver-for-TMIO-devices.patch @@ -0,0 +1,608 @@ +From 917b3997a39396f5f51418930de7b933ad053bad Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Sat, 29 Dec 2007 15:14:23 +0000 +Subject: [PATCH 08/64] Nand driver for TMIO devices + +--- + drivers/mtd/nand/Kconfig | 7 + + drivers/mtd/nand/Makefile | 1 + + drivers/mtd/nand/tmio_nand.c | 557 ++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 565 insertions(+), 0 deletions(-) + create mode 100644 drivers/mtd/nand/tmio_nand.c + +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index 246d451..43e489a 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -284,6 +284,13 @@ config MTD_NAND_CM_X270 + depends on MTD_NAND && MACH_ARMCORE + + ++config MTD_NAND_TMIO ++ tristate "NAND Flash device on Toshiba Mobile IO Controller" ++ depends on MTD_NAND && MFD_CORE ++ help ++ Support for NAND flash connected to a Toshiba Mobile IO ++ Controller in some PDAs, including the Sharp SL6000x. ++ + config MTD_NAND_NANDSIM + tristate "Support for NAND Flash Simulator" + depends on MTD_PARTITIONS +diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile +index 3ad6c01..d839ebd 100644 +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o + obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o + obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o + obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o ++obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o + obj-$(CONFIG_MTD_ALAUDA) += alauda.o + +diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c +new file mode 100644 +index 0000000..450b4ec +--- /dev/null ++++ b/drivers/mtd/nand/tmio_nand.c +@@ -0,0 +1,557 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/*--------------------------------------------------------------------------*/ ++ ++/* tmio_nfcr.mode Register Command List */ ++#define FCR_MODE_DATA 0x94 /* Data Data_Mode */ ++#define FCR_MODE_COMMAND 0x95 /* Data Command_Mode */ ++#define FCR_MODE_ADDRESS 0x96 /* Data Address_Mode */ ++ ++#define FCR_MODE_HWECC_CALC 0xB4 /* HW-ECC Data */ ++#define FCR_MODE_HWECC_RESULT 0xD4 /* HW-ECC Calculation Result Read_Mode */ ++#define FCR_MODE_HWECC_RESET 0xF4 /* HW-ECC Reset */ ++ ++#define FCR_MODE_POWER_ON 0x0C /* Power Supply ON to SSFDC card */ ++#define FCR_MODE_POWER_OFF 0x08 /* Power Supply OFF to SSFDC card */ ++ ++#define FCR_MODE_LED_OFF 0x00 /* LED OFF */ ++#define FCR_MODE_LED_ON 0x04 /* LED ON */ ++ ++#define FCR_MODE_EJECT_ON 0x68 /* Ejection Demand from Penguin is Advanced */ ++#define FCR_MODE_EJECT_OFF 0x08 /* Ejection Demand from Penguin is Not Advanced */ ++ ++#define FCR_MODE_LOCK 0x6C /* Operates By Lock_Mode. Ejection Switch is Invalid */ ++#define FCR_MODE_UNLOCK 0x0C /* Operates By UnLock_Mode.Ejection Switch is Effective */ ++ ++#define FCR_MODE_CONTROLLER_ID 0x40 /* Controller ID Read */ ++#define FCR_MODE_STANDBY 0x00 /* SSFDC card Changes Standby State */ ++ ++#define FCR_MODE_WE 0x80 ++#define FCR_MODE_ECC1 0x40 ++#define FCR_MODE_ECC0 0x20 ++#define FCR_MODE_CE 0x10 ++#define FCR_MODE_PCNT1 0x08 ++#define FCR_MODE_PCNT0 0x04 ++#define FCR_MODE_ALE 0x02 ++#define FCR_MODE_CLE 0x01 ++ ++#define FCR_STATUS_BUSY 0x80 ++ ++/* ++ *NAND Flash Host Controller Configuration Register ++ */ ++struct tmio_nfhccr { ++ u8 x00[4]; ++ u16 command; /* 0x04 Command */ ++ u8 x01[0x0a]; ++ u16 base[2]; /* 0x10 NAND Flash Control Reg Base Addr*/ ++ u8 x02[0x29]; ++ u8 intp; /* 0x3d Interrupt Pin */ ++ u8 x03[0x0a]; ++ u8 inte; /* 0x48 Interrupt Enable */ ++ u8 x04; ++ u8 ec; /* 0x4a Event Control */ ++ u8 x05; ++ u8 icc; /* 0x4c Internal Clock Control */ ++ u8 x06[0x0e]; ++ u8 eccc; /* 0x5b ECC Control */ ++ u8 x07[4]; ++ u8 nftc; /* 0x60 NAND Flash Transaction Control */ ++ u8 nfm; /* 0x61 NAND Flash Monitor */ ++ u8 nfpsc; /* 0x62 NAND Flash Power Supply Control */ ++ u8 nfdc; /* 0x63 NAND Flash Detect Control */ ++ u8 x08[0x9c]; ++} __attribute__ ((packed)); ++ ++/* ++ *NAND Flash Control Register ++ */ ++struct tmio_nfcr { ++union { ++ u8 u8; /* 0x00 Data Register */ ++ u16 u16; ++ u32 u32; ++} __attribute__ ((packed)); ++ u8 mode; /* 0x04 Mode Register */ ++ u8 status; /* 0x05 Status Register */ ++ u8 isr; /* 0x06 Interrupt Status Register */ ++ u8 imr; /* 0x07 Interrupt Mask Register */ ++} __attribute__ ((packed)); ++ ++struct tmio_nand { ++ struct mtd_info mtd; ++ struct nand_chip chip; ++ ++ struct platform_device *dev; ++ ++ struct tmio_nfhccr __iomem *ccr; ++ struct tmio_nfcr __iomem *fcr; ++ ++ unsigned int irq; ++ ++ /* for tmio_nand_read_byte */ ++ u8 read; ++ unsigned read_good:1; ++}; ++ ++#define mtd_to_tmio(m) container_of(m, struct tmio_nand, mtd) ++ ++#ifdef CONFIG_MTD_CMDLINE_PARTS ++static const char *part_probes[] = { "cmdlinepart", NULL }; ++#endif ++ ++/*--------------------------------------------------------------------------*/ ++ ++static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd, ++ unsigned int ctrl) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ struct nand_chip *chip = mtd->priv; ++ ++ if (ctrl & NAND_CTRL_CHANGE) { ++ u8 mode; ++ ++ if (ctrl & NAND_NCE) { ++ mode = FCR_MODE_DATA; ++ ++ if (ctrl & NAND_CLE) ++ mode |= FCR_MODE_CLE; ++ else ++ mode &= ~FCR_MODE_CLE; ++ ++ if (ctrl & NAND_ALE) ++ mode |= FCR_MODE_ALE; ++ else ++ mode &= ~FCR_MODE_ALE; ++ } else { ++ mode = FCR_MODE_STANDBY; ++ } ++ ++ iowrite8(mode, &fcr->mode); ++ tmio->read_good = 0; ++ } ++ ++ if (cmd != NAND_CMD_NONE) ++ writeb(cmd, chip->IO_ADDR_W); ++} ++ ++static int tmio_nand_dev_ready(struct mtd_info *mtd) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ ++ return !(ioread8(&fcr->status) & FCR_STATUS_BUSY); ++} ++ ++static irqreturn_t tmio_irq(int irq, void *__dev) ++{ ++ struct platform_device *dev = __dev; ++ struct tmio_nand *tmio = platform_get_drvdata(dev); ++ struct nand_chip *nand_chip = &tmio->chip; ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ ++ /* disable RDYREQ interrupt */ ++ iowrite8(0x00, &fcr->imr); ++ ++ if (unlikely(!waitqueue_active(&nand_chip->controller->wq))) ++ dev_warn(&dev->dev, "spurious interrupt\n"); ++ ++ wake_up(&nand_chip->controller->wq); ++ return IRQ_HANDLED; ++} ++ ++/* ++ *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB. ++ *This interrupt is normally disabled, but for long operations like ++ *erase and write, we enable it to wake us up. The irq handler ++ *disables the interrupt. ++ */ ++static int ++tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ long timeout; ++ ++ /* enable RDYREQ interrupt */ ++ iowrite8(0x0f, &fcr->isr); ++ iowrite8(0x81, &fcr->imr); ++ ++ timeout = wait_event_timeout(nand_chip->controller->wq, tmio_nand_dev_ready(mtd), ++ msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20)); ++ ++ if (unlikely(!tmio_nand_dev_ready(mtd))) { ++ iowrite8(0x00, &fcr->imr); ++ dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n", ++ nand_chip->state == FL_ERASING ? "erase" : "program", ++ nand_chip->state == FL_ERASING ? 400 : 20); ++ ++ } else if (unlikely(!timeout)) { ++ iowrite8(0x00, &fcr->imr); ++ dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n"); ++ } ++ ++ nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); ++ return nand_chip->read_byte(mtd); ++} ++ ++/* ++ *The TMIO controller combines two 8-bit data bytes into one 16-bit ++ *word. This function separates them so nand_base.c works as expected, ++ *especially its NAND_CMD_READID routines. ++ * ++ *To prevent stale data from being read, tmio_nand_hwcontrol() clears ++ *tmio->read_good. ++ */ ++static u_char tmio_nand_read_byte(struct mtd_info *mtd) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ unsigned int data; ++ ++ if (tmio->read_good--) ++ return tmio->read; ++ ++ data = ioread16(&fcr->u16); ++ tmio->read = data >> 8; ++ return data; ++} ++ ++/* ++ *The TMIO controller converts an 8-bit NAND interface to a 16-bit ++ *bus interface, so all data reads and writes must be 16-bit wide. ++ *Thus, we implement 16-bit versions of the read, write, and verify ++ *buffer functions. ++ */ ++static void ++tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ ++ iowrite16_rep(&fcr->u16, buf, len >> 1); ++} ++ ++static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ ++ ioread16_rep(&fcr->u16, buf, len >> 1); ++} ++ ++static int ++tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ u16 *p = (u16 *) buf; ++ ++ for (len >>= 1; len; len--) ++ if (*(p++) != ioread16(&fcr->u16)) ++ return -EFAULT; ++ return 0; ++} ++ ++static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ ++ iowrite8(FCR_MODE_HWECC_RESET, &fcr->mode); ++ ioread8(&fcr->u8); /* dummy read */ ++ iowrite8(FCR_MODE_HWECC_CALC, &fcr->mode); ++} ++ ++static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, ++ u_char *ecc_code) ++{ ++ struct tmio_nand *tmio = mtd_to_tmio(mtd); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ unsigned int ecc; ++ ++ iowrite8(FCR_MODE_HWECC_RESULT, &fcr->mode); ++ ++ ecc = ioread16(&fcr->u16); ++ ecc_code[1] = ecc; /* 000-255 LP7-0 */ ++ ecc_code[0] = ecc >> 8; /* 000-255 LP15-8 */ ++ ecc = ioread16(&fcr->u16); ++ ecc_code[2] = ecc; /* 000-255 CP5-0,11b */ ++ ecc_code[4] = ecc >> 8; /* 256-511 LP7-0 */ ++ ecc = ioread16(&fcr->u16); ++ ecc_code[3] = ecc; /* 256-511 LP15-8 */ ++ ecc_code[5] = ecc >> 8; /* 256-511 CP5-0,11b */ ++ ++ iowrite8(FCR_MODE_DATA, &fcr->mode); ++ return 0; ++} ++ ++static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ const struct resource *nfcr = NULL; ++ struct tmio_nfhccr __iomem *ccr = tmio->ccr; ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ unsigned long base; ++ int i; ++ ++ for (i = 0; i < cell->num_resources; i++) ++ if (!strcmp((cell->resources+i)->name, TMIO_NAND_CONTROL)) ++ nfcr = &cell->resources[i]; ++ ++ if (nfcr == NULL) ++ return -ENOMEM; ++ ++ if (!cell->enable) { ++ printk(KERN_ERR "null cell enable!"); ++ return -EINVAL; ++ } ++ ++ cell->enable(dev); ++ ++ /* (4Ch) CLKRUN Enable 1st spcrunc */ ++ iowrite8(0x81, &ccr->icc); ++ ++ /* (10h)BaseAddress 0x1000 spba.spba2 */ ++ base = nfcr->start; ++ iowrite16(base, ccr->base + 0); ++ iowrite16(base >> 16, ccr->base + 1); ++ ++ /* (04h)Command Register I/O spcmd */ ++ iowrite8(0x02, &ccr->command); ++ ++ /* (62h) Power Supply Control ssmpwc */ ++ /* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */ ++ iowrite8(0x02, &ccr->nfpsc); ++ ++ /* (63h) Detect Control ssmdtc */ ++ iowrite8(0x02, &ccr->nfdc); ++ ++ /* Interrupt status register clear sintst */ ++ iowrite8(0x0f, &fcr->isr); ++ ++ /* After power supply, Media are reset smode */ ++ iowrite8(FCR_MODE_POWER_ON, &fcr->mode); ++ iowrite8(FCR_MODE_COMMAND, &fcr->mode); ++ iowrite8(NAND_CMD_RESET, &fcr->u8); ++ ++ /* Standby Mode smode */ ++ iowrite8(FCR_MODE_STANDBY, &fcr->mode); ++ ++ mdelay(5); ++ ++ return 0; ++} ++ ++static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct tmio_nfcr __iomem *fcr = tmio->fcr; ++ ++ iowrite8(FCR_MODE_POWER_OFF, &fcr->mode); ++ cell->disable(dev); ++} ++ ++static int tmio_probe(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct tmio_nand_data *data = cell->driver_data; ++ struct resource *ccr = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_NAND_CONFIG); ++ struct resource *fcr = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_NAND_CONTROL); ++ int irq = platform_get_irq(dev, 0); ++ struct tmio_nand *tmio; ++ struct mtd_info *mtd; ++ struct nand_chip *nand_chip; ++ struct mtd_partition *parts; ++ int nbparts = 0; ++ int retval; ++ ++ if (data == NULL) { ++ dev_err(&dev->dev, "NULL platform data!\n"); ++ return -EINVAL; ++ } ++ ++ tmio = kzalloc(sizeof *tmio, GFP_KERNEL); ++ if (!tmio) { ++ retval = -ENOMEM; ++ goto err_kzalloc; ++ } ++ ++ tmio->dev = dev; ++ ++ platform_set_drvdata(dev, tmio); ++ mtd = &tmio->mtd; ++ nand_chip = &tmio->chip; ++ mtd->priv = nand_chip; ++ mtd->name = "tmio-nand"; ++ ++ tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1); ++ if (!tmio->ccr) { ++ retval = -EIO; ++ goto err_iomap_ccr; ++ } ++ ++ tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1); ++ if (!tmio->fcr) { ++ retval = -EIO; ++ goto err_iomap_fcr; ++ } ++ ++ retval = tmio_hw_init(dev, tmio); ++ if (retval) ++ goto err_hwinit; ++ ++ /* Set address of NAND IO lines */ ++ nand_chip->IO_ADDR_R = tmio->fcr; ++ nand_chip->IO_ADDR_W = tmio->fcr; ++ ++ /* Set address of hardware control function */ ++ nand_chip->cmd_ctrl = tmio_nand_hwcontrol; ++ nand_chip->dev_ready = tmio_nand_dev_ready; ++ nand_chip->read_byte = tmio_nand_read_byte; ++ nand_chip->write_buf = tmio_nand_write_buf; ++ nand_chip->read_buf = tmio_nand_read_buf; ++ nand_chip->verify_buf = tmio_nand_verify_buf; ++ ++ /* set eccmode using hardware ECC */ ++ nand_chip->ecc.mode = NAND_ECC_HW; ++ nand_chip->ecc.size = 512; ++ nand_chip->ecc.bytes = 6; ++ nand_chip->ecc.hwctl = tmio_nand_enable_hwecc; ++ nand_chip->ecc.calculate = tmio_nand_calculate_ecc; ++ nand_chip->ecc.correct = nand_correct_data; ++ nand_chip->badblock_pattern = data->badblock_pattern; ++ ++ /* 15 us command delay time */ ++ nand_chip->chip_delay = 15; ++ ++ retval = request_irq(irq, &tmio_irq, ++ IRQF_DISABLED, dev->dev.bus_id, dev); ++ if (retval) { ++ dev_err(&dev->dev, "request_irq error %d\n", retval); ++ goto err_irq; ++ } ++ ++ tmio->irq = irq; ++ nand_chip->waitfunc = tmio_nand_wait; ++ ++ /* Scan to find existence of the device */ ++ if (nand_scan(mtd, 1)) { ++ retval = -ENODEV; ++ goto err_scan; ++ } ++ /* Register the partitions */ ++#ifdef CONFIG_MTD_PARTITIONS ++#ifdef CONFIG_MTD_CMDLINE_PARTS ++ nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0); ++#endif ++ if (nbparts <= 0) { ++ parts = data->partition; ++ nbparts = data->num_partitions; ++ } ++ ++ retval = add_mtd_partitions(mtd, parts, nbparts); ++#else ++ retval = add_mtd_device(mtd); ++#endif ++ ++ if (!retval) ++ return retval; ++ ++ nand_release(mtd); ++ ++err_scan: ++ if (tmio->irq) ++ free_irq(tmio->irq, dev); ++err_irq: ++ tmio_hw_stop(dev, tmio); ++err_hwinit: ++ iounmap(tmio->fcr); ++err_iomap_fcr: ++ iounmap(tmio->ccr); ++err_iomap_ccr: ++ kfree(tmio); ++err_kzalloc: ++ return retval; ++} ++ ++static int tmio_remove(struct platform_device *dev) ++{ ++ struct tmio_nand *tmio = platform_get_drvdata(dev); ++ ++ nand_release(&tmio->mtd); ++ if (tmio->irq) ++ free_irq(tmio->irq, tmio); ++ tmio_hw_stop(dev, tmio); ++ iounmap(tmio->fcr); ++ iounmap(tmio->ccr); ++ kfree(tmio); ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int tmio_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ ++ if (cell->suspend) ++ cell->suspend(dev); ++ ++ tmio_hw_stop(dev, platform_get_drvdata(dev)); ++ return 0; ++} ++ ++static int tmio_resume(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ ++ tmio_hw_init(dev, platform_get_drvdata(dev)); ++ ++ if (cell->resume) ++ cell->resume(dev); ++ ++ return 0; ++} ++#endif ++ ++static struct platform_driver tmio_driver = { ++ .driver.name = "tmio-nand", ++ .driver.owner = THIS_MODULE, ++ .probe = tmio_probe, ++ .remove = tmio_remove, ++#ifdef CONFIG_PM ++ .suspend = tmio_suspend, ++ .resume = tmio_resume, ++#endif ++}; ++ ++static int __init tmio_init(void) ++{ ++ return platform_driver_register(&tmio_driver); ++} ++ ++static void __exit tmio_exit(void) ++{ ++ platform_driver_unregister(&tmio_driver); ++} ++ ++module_init(tmio_init); ++module_exit(tmio_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Dirk Opfer, Chris Humbert, Dmitry Baryshkov"); ++MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0009-FB-driver-for-TMIO-devices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0009-FB-driver-for-TMIO-devices.patch new file mode 100644 index 0000000000..5fc96f8973 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0009-FB-driver-for-TMIO-devices.patch @@ -0,0 +1,1128 @@ +From 519d015892ab0a7cad1f6b26fcd38117171384ce Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Tue, 1 Jan 2008 21:22:23 +0000 +Subject: [PATCH 09/64] FB driver for TMIO devices + +--- + drivers/video/Kconfig | 22 + + drivers/video/Makefile | 1 + + drivers/video/tmiofb.c | 1062 ++++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 1085 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/tmiofb.c + +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index 5b3dbcf..6d0df58 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -1782,6 +1782,28 @@ config FB_W100 + + If unsure, say N. + ++config FB_TMIO ++ tristate "Toshiba Mobice IO FrameBuffer support" ++ depends on FB && MFD_CORE ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ ---help--- ++ Frame buffer driver for the Toshiba Mobile IO integrated as found ++ on the Sharp SL-6000 series ++ ++ This driver is also available as a module ( = code which can be ++ inserted and removed from the running kernel whenever you want). The ++ module will be called tmiofb. If you want to compile it as a module, ++ say M here and read . ++ ++ If unsure, say N. ++ ++config FB_TMIO_ACCELL ++ bool "tmiofb acceleration" ++ depends on FB_TMIO ++ default y ++ + config FB_S3C2410 + tristate "S3C2410 LCD framebuffer support" + depends on FB && ARCH_S3C2410 +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index 83e02b3..74e9384 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -97,6 +97,7 @@ obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o + obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o + obj-$(CONFIG_FB_PXA) += pxafb.o + obj-$(CONFIG_FB_W100) += w100fb.o ++obj-$(CONFIG_FB_TMIO) += tmiofb.o + obj-$(CONFIG_FB_AU1100) += au1100fb.o + obj-$(CONFIG_FB_AU1200) += au1200fb.o + obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o +diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c +new file mode 100644 +index 0000000..6b963a1 +--- /dev/null ++++ b/drivers/video/tmiofb.c +@@ -0,0 +1,1062 @@ ++/* ++ * Frame Buffer Device for Toshiba Mobile IO(TMIO) controller ++ * ++ * Copyright(C) 2005-2006 Chris Humbert ++ * Copyright(C) 2005 Dirk Opfer ++ * ++ * Based on: ++ * drivers/video/w100fb.c ++ * code written by Sharp/Lineo for 2.4 kernels ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++/* Why should fb driver call console functions? because acquire_console_sem() */ ++#include ++#include ++#include ++ ++/* ++ * accelerator commands ++ */ ++#define TMIOFB_ACC_CSADR(x) (0x00000000 | ((x) & 0x001ffffe)) ++#define TMIOFB_ACC_CHPIX(x) (0x01000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_CVPIX(x) (0x02000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_PSADR(x) (0x03000000 | ((x) & 0x00fffffe)) ++#define TMIOFB_ACC_PHPIX(x) (0x04000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_PVPIX(x) (0x05000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_PHOFS(x) (0x06000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_PVOFS(x) (0x07000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_POADR(x) (0x08000000 | ((x) & 0x00fffffe)) ++#define TMIOFB_ACC_RSTR(x) (0x09000000 | ((x) & 0x000000ff)) ++#define TMIOFB_ACC_TCLOR(x) (0x0A000000 | ((x) & 0x0000ffff)) ++#define TMIOFB_ACC_FILL(x) (0x0B000000 | ((x) & 0x0000ffff)) ++#define TMIOFB_ACC_DSADR(x) (0x0C000000 | ((x) & 0x00fffffe)) ++#define TMIOFB_ACC_SSADR(x) (0x0D000000 | ((x) & 0x00fffffe)) ++#define TMIOFB_ACC_DHPIX(x) (0x0E000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_DVPIX(x) (0x0F000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_SHPIX(x) (0x10000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_SVPIX(x) (0x11000000 | ((x) & 0x000003ff)) ++#define TMIOFB_ACC_LBINI(x) (0x12000000 | ((x) & 0x0000ffff)) ++#define TMIOFB_ACC_LBK2(x) (0x13000000 | ((x) & 0x0000ffff)) ++#define TMIOFB_ACC_SHBINI(x) (0x14000000 | ((x) & 0x0000ffff)) ++#define TMIOFB_ACC_SHBK2(x) (0x15000000 | ((x) & 0x0000ffff)) ++#define TMIOFB_ACC_SVBINI(x) (0x16000000 | ((x) & 0x0000ffff)) ++#define TMIOFB_ACC_SVBK2(x) (0x17000000 | ((x) & 0x0000ffff)) ++ ++#define TMIOFB_ACC_CMGO 0x20000000 ++#define TMIOFB_ACC_CMGO_CEND 0x00000001 ++#define TMIOFB_ACC_CMGO_INT 0x00000002 ++#define TMIOFB_ACC_CMGO_CMOD 0x00000010 ++#define TMIOFB_ACC_CMGO_CDVRV 0x00000020 ++#define TMIOFB_ACC_CMGO_CDHRV 0x00000040 ++#define TMIOFB_ACC_CMGO_RUND 0x00008000 ++#define TMIOFB_ACC_SCGO 0x21000000 ++#define TMIOFB_ACC_SCGO_CEND 0x00000001 ++#define TMIOFB_ACC_SCGO_INT 0x00000002 ++#define TMIOFB_ACC_SCGO_ROP3 0x00000004 ++#define TMIOFB_ACC_SCGO_TRNS 0x00000008 ++#define TMIOFB_ACC_SCGO_DVRV 0x00000010 ++#define TMIOFB_ACC_SCGO_DHRV 0x00000020 ++#define TMIOFB_ACC_SCGO_SVRV 0x00000040 ++#define TMIOFB_ACC_SCGO_SHRV 0x00000080 ++#define TMIOFB_ACC_SCGO_DSTXY 0x00008000 ++#define TMIOFB_ACC_SBGO 0x22000000 ++#define TMIOFB_ACC_SBGO_CEND 0x00000001 ++#define TMIOFB_ACC_SBGO_INT 0x00000002 ++#define TMIOFB_ACC_SBGO_DVRV 0x00000010 ++#define TMIOFB_ACC_SBGO_DHRV 0x00000020 ++#define TMIOFB_ACC_SBGO_SVRV 0x00000040 ++#define TMIOFB_ACC_SBGO_SHRV 0x00000080 ++#define TMIOFB_ACC_SBGO_SBMD 0x00000100 ++#define TMIOFB_ACC_FLGO 0x23000000 ++#define TMIOFB_ACC_FLGO_CEND 0x00000001 ++#define TMIOFB_ACC_FLGO_INT 0x00000002 ++#define TMIOFB_ACC_FLGO_ROP3 0x00000004 ++#define TMIOFB_ACC_LDGO 0x24000000 ++#define TMIOFB_ACC_LDGO_CEND 0x00000001 ++#define TMIOFB_ACC_LDGO_INT 0x00000002 ++#define TMIOFB_ACC_LDGO_ROP3 0x00000004 ++#define TMIOFB_ACC_LDGO_ENDPX 0x00000008 ++#define TMIOFB_ACC_LDGO_LVRV 0x00000010 ++#define TMIOFB_ACC_LDGO_LHRV 0x00000020 ++#define TMIOFB_ACC_LDGO_LDMOD 0x00000040 ++ ++/* a FIFO is always allocated, even if acceleration is not used */ ++#define TMIOFB_FIFO_SIZE 512 ++ ++/* ++ * LCD Host Controller Configuration Register ++ * ++ * This iomem area supports only 16-bit IO. ++ */ ++struct tmio_lhccr { ++ u16 x00[2]; ++ u16 cmd; /* 0x04 Command */ ++ u16 x01; ++ u16 revid; /* 0x08 Revision ID */ ++ u16 x02[3]; ++ u16 basel; /* 0x10 LCD Control Reg Base Addr Low */ ++ u16 baseh; /* 0x12 LCD Control Reg Base Addr High */ ++ u16 x03[0x16]; ++ u16 ugcc; /* 0x40 Unified Gated Clock Control */ ++ u16 gcc; /* 0x42 Gated Clock Control */ ++ u16 x04[6]; ++ u16 usc; /* 0x50 Unified Software Clear */ ++ u16 x05[7]; ++ u16 vramrtc; /* 0x60 VRAM Timing Control */ ++ /* 0x61 VRAM Refresh Control */ ++ u16 vramsac; /* 0x62 VRAM Access Control */ ++ /* 0x63 VRAM Status */ ++ u16 vrambc; /* 0x64 VRAM Block Control */ ++ u16 x06[0x4d]; ++}; ++ ++/* ++ * LCD Control Register ++ * ++ * This iomem area supports only 16-bit IO. ++ */ ++struct tmio_lcr { ++ u16 uis; /* 0x000 Unified Interrupt Status */ ++ u16 x00[3]; ++ u16 vhpn; /* 0x008 VRAM Horizontal Pixel Number */ ++ u16 cfsal; /* 0x00a Command FIFO Start Address Low */ ++ u16 cfsah; /* 0x00c Command FIFO Start Address High */ ++ u16 cfs; /* 0x00e Command FIFO Size */ ++ u16 cfws; /* 0x010 Command FIFO Writeable Size */ ++ u16 bbie; /* 0x012 BitBLT Interrupt Enable */ ++ u16 bbisc; /* 0x014 BitBLT Interrupt Status and Clear */ ++ u16 ccs; /* 0x016 Command Count Status */ ++ u16 bbes; /* 0x018 BitBLT Execution Status */ ++ u16 x01; ++ u16 cmdl; /* 0x01c Command Low */ ++ u16 cmdh; /* 0x01e Command High */ ++ u16 x02; ++ u16 cfc; /* 0x022 Command FIFO Clear */ ++ u16 ccifc; /* 0x024 CMOS Camera IF Control */ ++ u16 hwt; /* 0x026 Hardware Test */ ++ u16 x03[0x6c]; ++ u16 lcdccrc;/* 0x100 LCDC Clock and Reset Control */ ++ u16 lcdcc; /* 0x102 LCDC Control */ ++ u16 lcdcopc;/* 0x104 LCDC Output Pin Control */ ++ u16 x04; ++ u16 lcdis; /* 0x108 LCD Interrupt Status */ ++ u16 lcdim; /* 0x10a LCD Interrupt Mask */ ++ u16 lcdie; /* 0x10c LCD Interrupt Enable */ ++ u16 x05[10]; ++ u16 gdsal; /* 0x122 Graphics Display Start Address Low */ ++ u16 gdsah; /* 0x124 Graphics Display Start Address High */ ++ u16 x06[2]; ++ u16 vhpcl; /* 0x12a VRAM Horizontal Pixel Count Low */ ++ u16 vhpch; /* 0x12c VRAM Horizontal Pixel Count High */ ++ u16 gm; /* 0x12e Graphic Mode(VRAM access enable) */ ++ u16 x07[8]; ++ u16 ht; /* 0x140 Horizontal Total */ ++ u16 hds; /* 0x142 Horizontal Display Start */ ++ u16 hss; /* 0x144 H-Sync Start */ ++ u16 hse; /* 0x146 H-Sync End */ ++ u16 x08[2]; ++ u16 hnp; /* 0x14c Horizontal Number of Pixels */ ++ u16 x09; ++ u16 vt; /* 0x150 Vertical Total */ ++ u16 vds; /* 0x152 Vertical Display Start */ ++ u16 vss; /* 0x154 V-Sync Start */ ++ u16 vse; /* 0x156 V-Sync End */ ++ u16 x0a[4]; ++ u16 cdln; /* 0x160 Current Display Line Number */ ++ u16 iln; /* 0x162 Interrupt Line Number */ ++ u16 sp; /* 0x164 Sync Polarity */ ++ u16 misc; /* 0x166 MISC(RGB565 mode) */ ++ u16 x0b; ++ u16 vihss; /* 0x16a Video Interface H-Sync Start */ ++ u16 vivs; /* 0x16c Video Interface Vertical Start */ ++ u16 vive; /* 0x16e Video Interface Vertical End */ ++ u16 vivss; /* 0x170 Video Interface V-Sync Start */ ++ u16 x0c[6]; ++ u16 vccis; /* 0x17e Video / CMOS Camera Interface Select */ ++ u16 vidwsal;/* 0x180 VI Data Write Start Address Low */ ++ u16 vidwsah;/* 0x182 VI Data Write Start Address High */ ++ u16 vidrsal;/* 0x184 VI Data Read Start Address Low */ ++ u16 vidrsah;/* 0x186 VI Data Read Start Address High */ ++ u16 vipddst;/* 0x188 VI Picture Data Display Start Timing */ ++ u16 vipddet;/* 0x186 VI Picture Data Display End Timing */ ++ u16 vie; /* 0x18c Video Interface Enable */ ++ u16 vcs; /* 0x18e Video/Camera Select */ ++ u16 x0d[2]; ++ u16 vphwc; /* 0x194 Video Picture Horizontal Wait Count */ ++ u16 vphs; /* 0x196 Video Picture Horizontal Size */ ++ u16 vpvwc; /* 0x198 Video Picture Vertical Wait Count */ ++ u16 vpvs; /* 0x19a Video Picture Vertical Size */ ++ u16 x0e[2]; ++ u16 plhpix; /* 0x1a0 PLHPIX */ ++ u16 xs; /* 0x1a2 XStart */ ++ u16 xckhw; /* 0x1a4 XCK High Width */ ++ u16 x0f; ++ u16 sths; /* 0x1a8 STH Start */ ++ u16 vt2; /* 0x1aa Vertical Total */ ++ u16 ycksw; /* 0x1ac YCK Start Wait */ ++ u16 ysts; /* 0x1ae YST Start */ ++ u16 ppols; /* 0x1b0 #PPOL Start */ ++ u16 precw; /* 0x1b2 PREC Width */ ++ u16 vclkhw; /* 0x1b4 VCLK High Width */ ++ u16 oc; /* 0x1b6 Output Control */ ++ u16 x10[0x24]; ++}; ++static char *mode_option __devinitdata; ++ ++struct tmiofb_par { ++ u32 pseudo_palette[16]; ++ ++#ifdef CONFIG_FB_TMIO_ACCELL ++ wait_queue_head_t wait_acc; ++ bool use_polling; ++#endif ++ ++ struct tmio_lhccr __iomem *ccr; ++ struct tmio_lcr __iomem *lcr; ++ void __iomem *vram; ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++static irqreturn_t tmiofb_irq(int irq, void *__info); ++ ++/*--------------------------------------------------------------------------*/ ++ ++ ++/* ++ * Turns off the LCD controller and LCD host controller. ++ */ ++static int tmiofb_hw_stop(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct tmio_fb_data *data = cell->driver_data; ++ struct fb_info *info = platform_get_drvdata(dev); ++ struct tmiofb_par *par = info->par; ++ struct tmio_lhccr __iomem *ccr = par->ccr; ++ struct tmio_lcr __iomem *lcr = par->lcr; ++ ++ iowrite16(0, &ccr->ugcc); ++ iowrite16(0, &lcr->gm); ++ data->lcd_set_power(dev, 0); ++ iowrite16(0x0010, &lcr->lcdccrc); ++ ++ return 0; ++} ++ ++/* ++ * Initializes the LCD host controller. ++ */ ++static int tmiofb_hw_init(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct tmio_fb_data *data = cell->driver_data; ++ struct fb_info *info = platform_get_drvdata(dev); ++ struct tmiofb_par *par = info->par; ++ struct tmio_lhccr __iomem *ccr = par->ccr; ++ struct tmio_lcr __iomem *lcr = par->lcr; ++ const struct resource *nlcr = NULL; ++ const struct resource *vram = NULL; ++ unsigned long base; ++ int i; ++ ++ for (i = 0; i < cell->num_resources; i++) { ++ if (!strcmp((cell->resources+i)->name, TMIO_FB_CONTROL)) ++ nlcr = &cell->resources[i]; ++ if (!strcmp((cell->resources+i)->name, TMIO_FB_VRAM)) ++ vram = &cell->resources[i]; ++ } ++ ++ if (nlcr == NULL || vram == NULL) ++ return -EINVAL; ++ ++ base = nlcr->start; ++ ++ if (info->mode == NULL) { ++ printk(KERN_ERR "tmio-fb: null info->mode\n"); ++ info->mode = data->modes; ++ } ++ ++ data->lcd_mode(dev, info->mode); ++ ++ iowrite16(0x003a, &ccr->ugcc); ++ iowrite16(0x003a, &ccr->gcc); ++ iowrite16(0x3f00, &ccr->usc); ++ ++ data->lcd_set_power(dev, 1); ++ mdelay(2); ++ ++ iowrite16(0x0000, &ccr->usc); ++ iowrite16(base >> 16, &ccr->baseh); ++ iowrite16(base, &ccr->basel); ++ iowrite16(0x0002, &ccr->cmd); /* base address enable */ ++ iowrite16(0x40a8, &ccr->vramrtc); /* VRAMRC, VRAMTC */ ++ iowrite16(0x0018, &ccr->vramsac); /* VRAMSTS, VRAMAC */ ++ iowrite16(0x0002, &ccr->vrambc); ++ mdelay(2); ++ iowrite16(0x000b, &ccr->vrambc); ++ ++ base = vram->start + info->screen_size; ++ iowrite16(base >> 16, &lcr->cfsah); ++ iowrite16(base, &lcr->cfsal); ++ iowrite16(TMIOFB_FIFO_SIZE - 1, &lcr->cfs); ++ iowrite16(1, &lcr->cfc); ++ iowrite16(1, &lcr->bbie); ++ iowrite16(0, &lcr->cfws); ++ ++ return 0; ++} ++ ++/* ++ * Sets the LCD controller's output resolution and pixel clock ++ */ ++static void tmiofb_hw_mode(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct tmio_fb_data *data = cell->driver_data; ++ struct fb_info *info = platform_get_drvdata(dev); ++ struct fb_videomode *mode = info->mode; ++ struct tmiofb_par *par = info->par; ++ struct tmio_lcr __iomem *lcr = par->lcr; ++ unsigned int i; ++ ++ iowrite16(0, &lcr->gm); ++ data->lcd_set_power(dev, 0); ++ iowrite16(0x0010, &lcr->lcdccrc); ++ data->lcd_mode(dev, mode); ++ data->lcd_set_power(dev, 1); ++ ++ iowrite16(i = mode->xres * 2, &lcr->vhpn); ++ iowrite16(0, &lcr->gdsah); ++ iowrite16(0, &lcr->gdsal); ++ iowrite16(i >> 16, &lcr->vhpch); ++ iowrite16(i, &lcr->vhpcl); ++ iowrite16(i = 0, &lcr->hss); ++ iowrite16(i += mode->hsync_len, &lcr->hse); ++ iowrite16(i += mode->left_margin, &lcr->hds); ++ iowrite16(i += mode->xres + mode->right_margin, &lcr->ht); ++ iowrite16(mode->xres, &lcr->hnp); ++ iowrite16(i = 0, &lcr->vss); ++ iowrite16(i += mode->vsync_len, &lcr->vse); ++ iowrite16(i += mode->upper_margin, &lcr->vds); ++ iowrite16(i += mode->yres, &lcr->iln); ++ iowrite16(i += mode->lower_margin, &lcr->vt); ++ iowrite16(3, /* RGB565 mode */ &lcr->misc); ++ iowrite16(1, /* VRAM enable */ &lcr->gm); ++ iowrite16(0x4007, &lcr->lcdcc); ++ iowrite16(3, /* sync polarity */ &lcr->sp); ++ ++ iowrite16(0x0010, &lcr->lcdccrc); ++ mdelay(5); ++ iowrite16(0x0014, &lcr->lcdccrc); /* STOP_CKP */ ++ mdelay(5); ++ iowrite16(0x0015, &lcr->lcdccrc); /* STOP_CKP | SOFT_RESET */ ++ iowrite16(0xfffa, &lcr->vcs); ++} ++ ++/*--------------------------------------------------------------------------*/ ++ ++#ifdef CONFIG_FB_TMIO_ACCELL ++static int __must_check ++tmiofb_acc_wait(struct fb_info *info, unsigned int ccs) ++{ ++ struct tmiofb_par *par = info->par; ++ struct tmio_lcr __iomem *lcr = par->lcr; ++ if (in_atomic() || par->use_polling) { ++ int i = 0; ++ while (ioread16(&lcr->ccs) > ccs) { ++ udelay(1); ++ i++; ++ if (i > 10000) { ++ printk(KERN_ERR "tmiofb: timeout waiting for %d\n", ccs); ++ return -ETIMEDOUT; ++ } ++ tmiofb_irq(-1, info); ++ } ++ } else { ++ if (!wait_event_interruptible_timeout(par->wait_acc, ++ ioread16(&par->lcr->ccs) <= ccs, 1000)) { ++ printk(KERN_ERR "tmiofb: timeout waiting for %d\n", ccs); ++ return -ETIMEDOUT; ++ } ++ } ++ ++ return 0; ++} ++ ++/* ++ * Writes an accelerator command to the accelerator's FIFO. ++ */ ++static int ++tmiofb_acc_write(struct fb_info *info, const u32 *cmd, unsigned int count) ++{ ++ struct tmiofb_par *par = info->par; ++ struct tmio_lcr __iomem *lcr = par->lcr; ++ int ret; ++ ++ ret = tmiofb_acc_wait(info, TMIOFB_FIFO_SIZE - count); ++ if (ret) ++ return ret; ++ ++ for (; count; count--, cmd++) { ++ iowrite16(*cmd >> 16, &lcr->cmdh); ++ iowrite16(*cmd, &lcr->cmdl); ++ } ++ ++ return ret; ++} ++ ++/* ++ * Wait for the accelerator to finish its operations before writing ++ * to the framebuffer for consistent display output. ++ */ ++static int tmiofb_sync(struct fb_info *fbi) ++{ ++ struct tmiofb_par *par = fbi->par; ++ ++ int ret; ++ int i = 0; ++ ++ ret = tmiofb_acc_wait(fbi, 0); ++ ++ while (ioread16(&par->lcr->bbes) & 2) { /* blit active */ ++ udelay(1); ++ i++ ; ++ if (i > 10000) { ++ printk(KERN_ERR "timeout waiting for blit to end!\n"); ++ return -ETIMEDOUT; ++ } ++ } ++ ++ return ret; ++} ++ ++static void ++tmiofb_fillrect(struct fb_info *fbi, const struct fb_fillrect *rect) ++{ ++ const u32 cmd [] = { ++ TMIOFB_ACC_DSADR((rect->dy * fbi->mode->xres + rect->dx) * 2), ++ TMIOFB_ACC_DHPIX(rect->width - 1), ++ TMIOFB_ACC_DVPIX(rect->height - 1), ++ TMIOFB_ACC_FILL(rect->color), ++ TMIOFB_ACC_FLGO, ++ }; ++ ++ if (fbi->state != FBINFO_STATE_RUNNING || ++ fbi->flags & FBINFO_HWACCEL_DISABLED) { ++ cfb_fillrect(fbi, rect); ++ return; ++ } ++ ++ tmiofb_acc_write(fbi, cmd, ARRAY_SIZE(cmd)); ++} ++ ++static void ++tmiofb_copyarea(struct fb_info *fbi, const struct fb_copyarea *area) ++{ ++ const u32 cmd [] = { ++ TMIOFB_ACC_DSADR((area->dy * fbi->mode->xres + area->dx) * 2), ++ TMIOFB_ACC_DHPIX(area->width - 1), ++ TMIOFB_ACC_DVPIX(area->height - 1), ++ TMIOFB_ACC_SSADR((area->sy * fbi->mode->xres + area->sx) * 2), ++ TMIOFB_ACC_SCGO, ++ }; ++ ++ if (fbi->state != FBINFO_STATE_RUNNING || ++ fbi->flags & FBINFO_HWACCEL_DISABLED) { ++ cfb_copyarea(fbi, area); ++ return; ++ } ++ ++ tmiofb_acc_write(fbi, cmd, ARRAY_SIZE(cmd)); ++} ++#endif ++ ++static void tmiofb_clearscreen(struct fb_info *info) ++{ ++ const struct fb_fillrect rect = { ++ .dx = 0, ++ .dy = 0, ++ .width = info->mode->xres, ++ .height = info->mode->yres, ++ .color = 0, ++ }; ++ ++ info->fbops->fb_fillrect(info, &rect); ++} ++ ++static int tmiofb_vblank(struct fb_info *fbi, struct fb_vblank *vblank) ++{ ++ struct tmiofb_par *par = fbi->par; ++ struct fb_videomode *mode = fbi->mode; ++ unsigned int vcount = ioread16(&par->lcr->cdln); ++ unsigned int vds = mode->vsync_len + mode->upper_margin; ++ ++ vblank->vcount = vcount; ++ vblank->flags = FB_VBLANK_HAVE_VBLANK | FB_VBLANK_HAVE_VCOUNT ++ | FB_VBLANK_HAVE_VSYNC; ++ ++ if (vcount < mode->vsync_len) ++ vblank->flags |= FB_VBLANK_VSYNCING; ++ ++ if (vcount < vds || vcount > vds + mode->yres) ++ vblank->flags |= FB_VBLANK_VBLANKING; ++ ++ return 0; ++} ++ ++ ++static int tmiofb_ioctl(struct fb_info *fbi, ++ unsigned int cmd, unsigned long arg) ++{ ++ switch (cmd) { ++ case FBIOGET_VBLANK: { ++ struct fb_vblank vblank = {0}; ++ void __user *argp = (void __user *) arg; ++ ++ tmiofb_vblank(fbi, &vblank); ++ if (copy_to_user(argp, &vblank, sizeof vblank)) ++ return -EFAULT; ++ return 0; ++ } ++ ++#ifdef CONFIG_FB_TMIO_ACCELL ++ case FBIO_TMIO_ACC_SYNC: ++ tmiofb_sync(fbi); ++ return 0; ++ ++ case FBIO_TMIO_ACC_WRITE: { ++ u32 __user *argp = (void __user *) arg; ++ u32 len; ++ u32 acc [16]; ++ ++ if (copy_from_user(&len, argp, sizeof(u32))) ++ return -EFAULT; ++ if (len > ARRAY_SIZE(acc)) ++ return -EINVAL; ++ if (copy_from_user(acc, argp + 1, sizeof(u32) * len)) ++ return -EFAULT; ++ ++ return tmiofb_acc_write(fbi, acc, len); ++ } ++#endif ++ } ++ ++ return -EINVAL; ++} ++ ++/*--------------------------------------------------------------------------*/ ++ ++/* Select the smallest mode that allows the desired resolution to be ++ * displayed. If desired, the x and y parameters can be rounded up to ++ * match the selected mode. ++ */ ++static struct fb_videomode* ++tmiofb_find_mode(struct fb_info *info, struct fb_var_screeninfo *var) ++{ ++ struct mfd_cell *cell = mfd_get_cell(to_platform_device(info->device)); ++ struct tmio_fb_data *data = cell->driver_data; ++ struct fb_videomode *best = NULL; ++ int i; ++ ++ for (i = 0; i < data->num_modes; i++) { ++ struct fb_videomode *mode = data->modes + i; ++ ++ if (mode->xres >= var->xres && mode->yres >= var->yres ++ && (!best || (mode->xres < best->xres ++ && mode->yres < best->yres))) ++ best = mode; ++ } ++ ++ return best; ++} ++ ++static int tmiofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ ++ struct fb_videomode *mode; ++ ++ mode = tmiofb_find_mode(info, var); ++ if (!mode || var->bits_per_pixel > 16) ++ return -EINVAL; ++ ++ fb_videomode_to_var(var, mode); ++ ++ var->xres_virtual = mode->xres; ++ var->yres_virtual = info->screen_size / (mode->xres * 2); ++ var->xoffset = 0; ++ var->yoffset = 0; ++ var->bits_per_pixel = 16; ++ var->grayscale = 0; ++ var->red.offset = 11; var->red.length = 5; ++ var->green.offset = 5; var->green.length = 6; ++ var->blue.offset = 0; var->blue.length = 5; ++ var->transp.offset = 0; var->transp.length = 0; ++ var->nonstd = 0; ++ var->height = 82; /* mm */ ++ var->width = 60; /* mm */ ++ var->rotate = 0; ++ return 0; ++} ++ ++static int tmiofb_set_par(struct fb_info *info) ++{ ++/* struct fb_var_screeninfo *var = &info->var; ++ struct fb_videomode *mode; ++ ++ mode = tmiofb_find_mode(info, var); ++ if (!mode) ++ return -EINVAL; ++ ++ if (info->mode == mode) ++ return 0; ++ ++ info->mode = mode; */ ++ info->fix.line_length = info->mode->xres * 2; ++ ++ tmiofb_hw_mode(to_platform_device(info->device)); ++ tmiofb_clearscreen(info); ++ return 0; ++} ++ ++static int tmiofb_setcolreg(unsigned regno, unsigned red, unsigned green, ++ unsigned blue, unsigned transp, ++ struct fb_info *info) ++{ ++ struct tmiofb_par *par = info->par; ++ ++ if (regno < ARRAY_SIZE(par->pseudo_palette)) { ++ par->pseudo_palette [regno] = ++ ((red & 0xf800)) | ++ ((green & 0xfc00) >> 5) | ++ ((blue & 0xf800) >> 11); ++ return 0; ++ } ++ ++ return 1; ++} ++ ++static struct fb_ops tmiofb_ops = { ++ .owner = THIS_MODULE, ++ ++ .fb_ioctl = tmiofb_ioctl, ++ .fb_check_var = tmiofb_check_var, ++ .fb_set_par = tmiofb_set_par, ++ .fb_setcolreg = tmiofb_setcolreg, ++ .fb_imageblit = cfb_imageblit, ++#ifdef CONFIG_FB_TMIO_ACCELL ++ .fb_sync = tmiofb_sync, ++ .fb_fillrect = tmiofb_fillrect, ++ .fb_copyarea = tmiofb_copyarea, ++#else ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++#endif ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++/* ++ * reasons for an interrupt: ++ * uis bbisc lcdis ++ * 0100 0001 accelerator command completed ++ * 2000 0001 vsync start ++ * 2000 0002 display start ++ * 2000 0004 line number match(0x1ff mask???) ++ */ ++static irqreturn_t tmiofb_irq(int irq, void *__info) ++{ ++ struct fb_info *info = __info; ++ struct tmiofb_par *par = info->par; ++ struct tmio_lcr __iomem *lcr = par->lcr; ++ unsigned int bbisc = ioread16(&lcr->bbisc); ++ ++ ++ if (unlikely(par->use_polling && irq != -1)) { ++ printk(KERN_INFO "tmiofb: switching to waitq\n"); ++ par->use_polling = false; ++ } ++ ++ iowrite16(bbisc, &lcr->bbisc); ++ ++#ifdef CONFIG_FB_TMIO_ACCELL ++ if (bbisc & 1) ++ wake_up(&par->wait_acc); ++#endif ++ ++ return IRQ_HANDLED; ++} ++ ++static int tmiofb_probe(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct tmio_fb_data *data = cell->driver_data; ++ struct resource *ccr = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_FB_CONFIG); ++ struct resource *lcr = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_FB_CONTROL); ++ struct resource *vram = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_FB_VRAM); ++ int irq = platform_get_irq(dev, 0); ++ struct fb_info *info; ++ struct tmiofb_par *par; ++ int retval; ++ ++ if (data == NULL) { ++ dev_err(&dev->dev, "NULL platform data!\n"); ++ return -EINVAL; ++ } ++ ++ info = framebuffer_alloc(sizeof(struct tmiofb_par), &dev->dev); ++ ++ if (!info) { ++ retval = -ENOMEM; ++ goto err_framebuffer_alloc; ++ } ++ ++ par = info->par; ++ platform_set_drvdata(dev, info); ++ ++#ifdef CONFIG_FB_TMIO_ACCELL ++ init_waitqueue_head(&par->wait_acc); ++ ++ par->use_polling = true; ++ ++ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA ++ | FBINFO_HWACCEL_FILLRECT; ++#else ++ info->flags = FBINFO_DEFAULT; ++#endif ++ ++ info->fbops = &tmiofb_ops; ++ ++ strcpy(info->fix.id, "tmio-fb"); ++ info->fix.smem_start = vram->start; ++ info->fix.smem_len = vram->end - vram->start + 1; ++ info->fix.type = FB_TYPE_PACKED_PIXELS; ++ info->fix.visual = FB_VISUAL_TRUECOLOR; ++ info->fix.mmio_start = lcr->start; ++ info->fix.mmio_len = lcr->end - lcr->start + 1; ++ info->fix.accel = FB_ACCEL_NONE; ++ info->screen_size = info->fix.smem_len - (4 * TMIOFB_FIFO_SIZE); ++ info->pseudo_palette = par->pseudo_palette; ++ ++ par->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1); ++ if (!par->ccr) { ++ retval = -ENOMEM; ++ goto err_ioremap_ccr; ++ } ++ ++ par->lcr = ioremap(info->fix.mmio_start, info->fix.mmio_len); ++ if (!par->lcr) { ++ retval = -ENOMEM; ++ goto err_ioremap_lcr; ++ } ++ ++ par->vram = ioremap(info->fix.smem_start, info->fix.smem_len); ++ if (!par->vram) { ++ retval = -ENOMEM; ++ goto err_ioremap_vram; ++ } ++ info->screen_base = par->vram; ++ ++ retval = request_irq(irq, &tmiofb_irq, IRQF_DISABLED, ++ dev->dev.bus_id, info); ++ ++ if (retval) ++ goto err_request_irq; ++ ++ retval = fb_find_mode(&info->var, info, mode_option, ++ data->modes, data->num_modes, ++ data->modes, 16); ++ if (!retval) { ++ retval = -EINVAL; ++ goto err_find_mode; ++ } ++ ++ retval = cell->enable(dev); ++ if (retval) ++ goto err_enable; ++ ++ retval = tmiofb_hw_init(dev); ++ if (retval) ++ goto err_hw_init; ++ ++/* retval = tmiofb_set_par(info); ++ if (retval) ++ goto err_set_par;*/ ++ ++ retval = register_framebuffer(info); ++ if (retval < 0) ++ goto err_register_framebuffer; ++ ++ printk(KERN_INFO "fb%d: %s frame buffer device\n", ++ info->node, info->fix.id); ++ ++ return 0; ++ ++err_register_framebuffer: ++/*err_set_par:*/ ++ tmiofb_hw_stop(dev); ++err_hw_init: ++ cell->disable(dev); ++err_enable: ++err_find_mode: ++ free_irq(irq, info); ++err_request_irq: ++ iounmap(par->vram); ++err_ioremap_vram: ++ iounmap(par->lcr); ++err_ioremap_lcr: ++ iounmap(par->ccr); ++err_ioremap_ccr: ++ platform_set_drvdata(dev, NULL); ++ framebuffer_release(info); ++err_framebuffer_alloc: ++ return retval; ++} ++ ++static int __devexit tmiofb_remove(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct fb_info *info = platform_get_drvdata(dev); ++ int irq = platform_get_irq(dev, 0); ++ struct tmiofb_par *par; ++ ++ if (info) { ++ par = info->par; ++ unregister_framebuffer(info); ++ ++ tmiofb_hw_stop(dev); ++ ++ cell->disable(dev); ++ ++ free_irq(irq, info); ++ ++ iounmap(par->vram); ++ iounmap(par->lcr); ++ iounmap(par->ccr); ++ ++ framebuffer_release(info); ++ platform_set_drvdata(dev, NULL); ++ } ++ ++ return 0; ++} ++ ++#if 0 ++static void tmiofb_dump_regs(struct platform_device *dev) ++{ ++ struct fb_info *info = platform_get_drvdata(dev); ++ struct tmiofb_par *par = info->par; ++ struct tmio_lhccr __iomem *ccr = par->ccr; ++ struct tmio_lcr __iomem *lcr = par->lcr; ++ ++ printk("lhccr:\n"); ++#define CCR_PR(n) printk("\t" #n " = \t%04x\n", ioread16(&ccr->n)); ++ CCR_PR(cmd); ++ CCR_PR(revid); ++ CCR_PR(basel); ++ CCR_PR(baseh); ++ CCR_PR(ugcc); ++ CCR_PR(gcc); ++ CCR_PR(usc); ++ CCR_PR(vramrtc); ++ CCR_PR(vramsac); ++ CCR_PR(vrambc); ++#undef CCR_PR ++ ++ printk("lcr: \n"); ++#define LCR_PR(n) printk("\t" #n " = \t%04x\n", ioread16(&lcr->n)); ++ LCR_PR(uis); ++ LCR_PR(vhpn); ++ LCR_PR(cfsal); ++ LCR_PR(cfsah); ++ LCR_PR(cfs); ++ LCR_PR(cfws); ++ LCR_PR(bbie); ++ LCR_PR(bbisc); ++ LCR_PR(ccs); ++ LCR_PR(bbes); ++ LCR_PR(cmdl); ++ LCR_PR(cmdh); ++ LCR_PR(cfc); ++ LCR_PR(ccifc); ++ LCR_PR(hwt); ++ LCR_PR(lcdccrc); ++ LCR_PR(lcdcc); ++ LCR_PR(lcdcopc); ++ LCR_PR(lcdis); ++ LCR_PR(lcdim); ++ LCR_PR(lcdie); ++ LCR_PR(gdsal); ++ LCR_PR(gdsah); ++ LCR_PR(vhpcl); ++ LCR_PR(vhpch); ++ LCR_PR(gm); ++ LCR_PR(ht); ++ LCR_PR(hds); ++ LCR_PR(hss); ++ LCR_PR(hse); ++ LCR_PR(hnp); ++ LCR_PR(vt); ++ LCR_PR(vds); ++ LCR_PR(vss); ++ LCR_PR(vse); ++ LCR_PR(cdln); ++ LCR_PR(iln); ++ LCR_PR(sp); ++ LCR_PR(misc); ++ LCR_PR(vihss); ++ LCR_PR(vivs); ++ LCR_PR(vive); ++ LCR_PR(vivss); ++ LCR_PR(vccis); ++ LCR_PR(vidwsal); ++ LCR_PR(vidwsah); ++ LCR_PR(vidrsal); ++ LCR_PR(vidrsah); ++ LCR_PR(vipddst); ++ LCR_PR(vipddet); ++ LCR_PR(vie); ++ LCR_PR(vcs); ++ LCR_PR(vphwc); ++ LCR_PR(vphs); ++ LCR_PR(vpvwc); ++ LCR_PR(vpvs); ++ LCR_PR(plhpix); ++ LCR_PR(xs); ++ LCR_PR(xckhw); ++ LCR_PR(sths); ++ LCR_PR(vt2); ++ LCR_PR(ycksw); ++ LCR_PR(ysts); ++ LCR_PR(ppols); ++ LCR_PR(precw); ++ LCR_PR(vclkhw); ++ LCR_PR(oc); ++#undef LCR_PR ++} ++#endif ++ ++#ifdef CONFIG_PM ++static int tmiofb_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct fb_info *info = platform_get_drvdata(dev); ++ struct tmiofb_par *par = info->par; ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ int retval = 0; ++ ++ acquire_console_sem(); ++ ++ fb_set_suspend(info, 1); ++ ++ if (info->fbops->fb_sync) ++ info->fbops->fb_sync(info); ++ ++ ++ printk(KERN_INFO "tmiofb: switching to polling\n"); ++ par->use_polling = true; ++ tmiofb_hw_stop(dev); ++ ++ if (cell->suspend) ++ retval = cell->suspend(dev); ++ ++ release_console_sem(); ++ ++ return retval; ++} ++ ++static int tmiofb_resume(struct platform_device *dev) ++{ ++ struct fb_info *info = platform_get_drvdata(dev); ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ int retval; ++ ++ acquire_console_sem(); ++ ++ if (cell->resume) { ++ retval = cell->resume(dev); ++ if (retval) ++ return retval; ++ } ++ ++ tmiofb_irq(-1, info); ++ ++ tmiofb_hw_init(dev); ++ ++ tmiofb_hw_mode(dev); ++ ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ return 0; ++} ++#endif ++ ++static struct platform_driver tmiofb_driver = { ++ .driver.name = "tmio-fb", ++ .driver.owner = THIS_MODULE, ++ .probe = tmiofb_probe, ++ .remove = __devexit_p(tmiofb_remove), ++#ifdef CONFIG_PM ++ .suspend = tmiofb_suspend, ++ .resume = tmiofb_resume, ++#endif ++}; ++ ++/*--------------------------------------------------------------------------*/ ++ ++#ifndef MODULE ++static void __init tmiofb_setup(char *options) ++{ ++ char *this_opt; ++ ++ if (!options || !*options) ++ return; ++ ++ while ((this_opt = strsep(&options, ",")) != NULL) { ++ if (!*this_opt) continue; ++ /* ++ * FIXME ++ */ ++ } ++} ++#endif ++ ++static int __init tmiofb_init(void) ++{ ++#ifndef MODULE ++ char *option = NULL; ++ ++ if (fb_get_options("tmiofb", &option)) ++ return -ENODEV; ++ tmiofb_setup(option); ++#endif ++ return platform_driver_register(&tmiofb_driver); ++} ++ ++static void __exit tmiofb_cleanup(void) ++{ ++ platform_driver_unregister(&tmiofb_driver); ++} ++ ++module_init(tmiofb_init); ++module_exit(tmiofb_cleanup); ++ ++MODULE_DESCRIPTION("TMIO framebuffer driver"); ++MODULE_AUTHOR("Chris Humbert, Dirk Opfer, Dmitry Baryshkov"); ++MODULE_LICENSE("GPL"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0010-OHCI-driver-for-TMIO-devices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0010-OHCI-driver-for-TMIO-devices.patch new file mode 100644 index 0000000000..f358c069d0 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0010-OHCI-driver-for-TMIO-devices.patch @@ -0,0 +1,431 @@ +From e5f06830bc8d3ef4792c9c0569825d0347b39852 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 4 Jan 2008 18:43:31 +0000 +Subject: [PATCH 10/64] OHCI driver for TMIO devices + +--- + drivers/usb/Kconfig | 1 + + drivers/usb/host/Kconfig | 1 + + drivers/usb/host/ohci-hcd.c | 5 + + drivers/usb/host/ohci-tmio.c | 369 ++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 376 insertions(+), 0 deletions(-) + create mode 100644 drivers/usb/host/ohci-tmio.c + +diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig +index 7580aa5..8912042 100644 +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -36,6 +36,7 @@ config USB_ARCH_HAS_OHCI + default y if ARCH_EP93XX + default y if ARCH_AT91 + default y if ARCH_PNX4008 ++ default y if MFD_TC6393XB + # PPC: + default y if STB03xxx + default y if PPC_MPC52xx +diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig +index 49a91c5..5ae3589 100644 +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -101,6 +101,7 @@ config USB_OHCI_HCD + depends on USB && USB_ARCH_HAS_OHCI + select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + select I2C if ARCH_PNX4008 ++ select DMABOUNCE if MFD_TC6393XB + ---help--- + The Open Host Controller Interface (OHCI) is a standard for accessing + USB 1.1 host controller hardware. It does more in hardware than Intel's +diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c +index ecfe800..77abf3e 100644 +--- a/drivers/usb/host/ohci-hcd.c ++++ b/drivers/usb/host/ohci-hcd.c +@@ -1043,6 +1043,11 @@ MODULE_LICENSE ("GPL"); + #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver + #endif + ++#ifdef CONFIG_MFD_TC6393XB ++#include "ohci-tmio.c" ++#define PLATFORM_DRIVER ohci_hcd_tmio_driver ++#endif ++ + #ifdef CONFIG_USB_OHCI_HCD_SSB + #include "ohci-ssb.c" + #define SSB_OHCI_DRIVER ssb_ohci_driver +diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c +new file mode 100644 +index 0000000..be609f3 +--- /dev/null ++++ b/drivers/usb/host/ohci-tmio.c +@@ -0,0 +1,369 @@ ++/* ++ * OHCI HCD(Host Controller Driver) for USB. ++ * ++ *(C) Copyright 1999 Roman Weissgaerber ++ *(C) Copyright 2000-2002 David Brownell ++ *(C) Copyright 2002 Hewlett-Packard Company ++ * ++ * Bus glue for Toshiba Mobile IO(TMIO) Controller's OHCI core ++ *(C) Copyright 2005 Chris Humbert ++ * ++ * This is known to work with the following variants: ++ * TC6393XB revision 3 (32kB SRAM) ++ * ++ * The TMIO's OHCI core DMAs through a small internal buffer that ++ * is directly addressable by the CPU. dma_declare_coherent_memory ++ * and DMA bounce buffers allow the higher-level OHCI host driver to ++ * work. However, the dma API doesn't handle dma mapping failures ++ * well(dma_sg_map() is a prime example), so it is unusable. ++ * ++ * This HC pretends be a PIO-ish controller and uses the kernel's ++ * generic allocator for the entire SRAM. Using the USB core's ++ * usb_operations, we provide hcd_buffer_alloc/free. Using the OHCI's ++ * ohci_ops, we provide memory management for OHCI's TDs and EDs. We ++ * internally queue a URB's TDs until enough dma memory is available ++ * to enqueue them with the HC. ++ * ++ * Written from sparse documentation from Toshiba and Sharp's driver ++ * for the 2.4 kernel, ++ * usb-ohci-tc6393.c(C) Copyright 2004 Lineo Solutions, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/*#include ++#include ++#include ++#include ++#include ++#include */ ++#include ++#include ++#include ++#include ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * USB Host Controller Configuration Register ++ */ ++struct tmio_uhccr { ++ u8 x00[8]; ++ u8 revid; /* 0x08 Revision ID */ ++ u8 x01[7]; ++ u16 basel; /* 0x10 USB Control Register Base Address Low */ ++ u16 baseh; /* 0x12 USB Control Register Base Address High */ ++ u8 x02[0x2c]; ++ u8 ilme; /* 0x40 Internal Local Memory Enable */ ++ u8 x03[0x0b]; ++ u16 pm; /* 0x4c Power Management */ ++ u8 x04[2]; ++ u8 intc; /* 0x50 INT Control */ ++ u8 x05[3]; ++ u16 lmw1l; /* 0x54 Local Memory Window 1 LMADRS Low */ ++ u16 lmw1h; /* 0x56 Local Memory Window 1 LMADRS High */ ++ u16 lmw1bl; /* 0x58 Local Memory Window 1 Base Address Low */ ++ u16 lmw1bh; /* 0x5A Local Memory Window 1 Base Address High */ ++ u16 lmw2l; /* 0x5C Local Memory Window 2 LMADRS Low */ ++ u16 lmw2h; /* 0x5E Local Memory Window 2 LMADRS High */ ++ u16 lmw2bl; /* 0x60 Local Memory Window 2 Base Address Low */ ++ u16 lmw2bh; /* 0x62 Local Memory Window 2 Base Address High */ ++ u8 x06[0x98]; ++ u8 misc; /* 0xFC MISC */ ++ u8 x07[3]; ++} __attribute__((packed)); ++ ++#define UHCCR_PM_GKEN 0x0001 ++#define UHCCR_PM_CKRNEN 0x0002 ++#define UHCCR_PM_USBPW1 0x0004 ++#define UHCCR_PM_USBPW2 0x0008 ++#define UHCCR_PM_PMEE 0x0100 ++#define UHCCR_PM_PMES 0x8000 ++ ++/*-------------------------------------------------------------------------*/ ++ ++struct tmio_hcd { ++ struct tmio_uhccr __iomem *ccr; ++}; ++ ++#define hcd_to_tmio(hcd) ((struct tmio_hcd *)(hcd_to_ohci(hcd) + 1)) ++#define ohci_to_tmio(ohci) ((struct tmio_hcd *)(ohci + 1)) ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void tmio_stop_hc(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct tmio_hcd *tmio = hcd_to_tmio(hcd); ++ struct tmio_uhccr __iomem *ccr = tmio->ccr; ++ u16 pm; ++ ++ pm = UHCCR_PM_GKEN | UHCCR_PM_CKRNEN | UHCCR_PM_USBPW1 | UHCCR_PM_USBPW2; ++ iowrite8(0, &ccr->intc); ++ iowrite8(0, &ccr->ilme); ++ iowrite16(0, &ccr->basel); ++ iowrite16(0, &ccr->baseh); ++ iowrite16(pm, &ccr->pm); ++ ++ cell->disable(dev); ++} ++ ++static void tmio_start_hc(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct tmio_hcd *tmio = hcd_to_tmio(hcd); ++ struct tmio_uhccr __iomem *ccr = tmio->ccr; ++ u16 pm; ++ unsigned long base = hcd->rsrc_start; ++ ++ pm = UHCCR_PM_CKRNEN | UHCCR_PM_GKEN | UHCCR_PM_PMEE | UHCCR_PM_PMES; ++ cell->enable(dev); ++ ++ iowrite16(pm, &ccr->pm); ++ iowrite16(base, &ccr->basel); ++ iowrite16(base >> 16, &ccr->baseh); ++ iowrite8(1, &ccr->ilme); ++ iowrite8(2, &ccr->intc); ++ ++ dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n", ++ ioread8(&ccr->revid), hcd->rsrc_start, hcd->irq); ++} ++ ++static int usb_hcd_tmio_probe(const struct hc_driver *driver, ++ struct platform_device *dev) ++{ ++ struct resource *config = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_CONFIG); ++ struct resource *regs = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_CONTROL); ++ struct resource *sram = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM); ++ int irq = platform_get_irq(dev, 0); ++ struct tmio_hcd *tmio; ++ struct ohci_hcd *ohci; ++ struct usb_hcd *hcd; ++ int retval; ++ ++ if (usb_disabled()) ++ return -ENODEV; ++ ++ hcd = usb_create_hcd(driver, &dev->dev, dev->dev.bus_id); ++ if (!hcd) { ++ retval = -ENOMEM; ++ goto err_usb_create_hcd; ++ } ++ ++ hcd->rsrc_start = regs->start; ++ hcd->rsrc_len = regs->end - regs->start + 1; ++ ++ tmio = hcd_to_tmio(hcd); ++ ++ tmio->ccr = ioremap(config->start, config->end - config->start + 1); ++ if (!tmio->ccr) { ++ retval = -ENOMEM; ++ goto err_ioremap_ccr; ++ } ++ ++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); ++ if (!hcd->regs) { ++ retval = -ENOMEM; ++ goto err_ioremap_regs; ++ } ++ ++ if (dma_declare_coherent_memory(&dev->dev, sram->start, ++ sram->start, ++ sram->end - sram->start + 1, ++ DMA_MEMORY_MAP) != DMA_MEMORY_MAP) { ++ retval = -EBUSY; ++ goto err_dma_declare; ++ } ++ ++ retval = dmabounce_register_dev(&dev->dev, 512, 4096); ++ if (retval) ++ goto err_dmabounce_register_dev; ++ ++ tmio_start_hc(dev); ++ ohci = hcd_to_ohci(hcd); ++ ohci_hcd_init(ohci); ++ ++ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); ++ ++ if (retval == 0) ++ return retval; ++ ++ tmio_stop_hc(dev); ++ ++ dmabounce_unregister_dev(&dev->dev); ++err_dmabounce_register_dev: ++ dma_release_declared_memory(&dev->dev); ++err_dma_declare: ++ iounmap(hcd->regs); ++err_ioremap_regs: ++ iounmap(tmio->ccr); ++err_ioremap_ccr: ++ usb_put_hcd(hcd); ++err_usb_create_hcd: ++ ++ return retval; ++} ++ ++static void usb_hcd_tmio_remove(struct usb_hcd *hcd, struct platform_device *dev) ++{ ++ struct tmio_hcd *tmio = hcd_to_tmio(hcd); ++ ++ usb_remove_hcd(hcd); ++ tmio_stop_hc(dev); ++ dmabounce_unregister_dev(&dev->dev); ++ dma_release_declared_memory(&dev->dev); ++ iounmap(hcd->regs); ++ iounmap(tmio->ccr); ++ usb_put_hcd(hcd); ++} ++ ++static int __devinit ++ohci_tmio_start(struct usb_hcd *hcd) ++{ ++ struct ohci_hcd *ohci = hcd_to_ohci(hcd); ++ int retval; ++ ++ if ((retval = ohci_init(ohci)) < 0) ++ return retval; ++ ++ if ((retval = ohci_run(ohci)) < 0) { ++ err("can't start %s", hcd->self.bus_name); ++ ohci_stop(hcd); ++ return retval; ++ } ++ ++ return 0; ++} ++ ++static const struct hc_driver ohci_tmio_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "TMIO OHCI USB Host Controller", ++ .hcd_priv_size = sizeof(struct ohci_hcd) + sizeof (struct tmio_hcd), ++ ++ /* generic hardware linkage */ ++ .irq = ohci_irq, ++ .flags = HCD_USB11 | HCD_MEMORY, ++ ++ /* basic lifecycle operations */ ++ .start = ohci_tmio_start, ++ .stop = ohci_stop, ++ .shutdown = ohci_shutdown, ++ ++ /* managing i/o requests and associated device resources */ ++ .urb_enqueue = ohci_urb_enqueue, ++ .urb_dequeue = ohci_urb_dequeue, ++ .endpoint_disable = ohci_endpoint_disable, ++ ++ /* scheduling support */ ++ .get_frame_number = ohci_get_frame, ++ ++ /* root hub support */ ++ .hub_status_data = ohci_hub_status_data, ++ .hub_control = ohci_hub_control, ++ .hub_irq_enable = ohci_rhsc_enable, ++#ifdef CONFIG_PM ++ .bus_suspend = ohci_bus_suspend, ++ .bus_resume = ohci_bus_resume, ++#endif ++ .start_port_reset = ohci_start_port_reset, ++}; ++ ++/*-------------------------------------------------------------------------*/ ++static struct platform_driver ohci_hcd_tmio_driver; ++ ++static int ++tmio_dmabounce_check(struct device *dev, dma_addr_t dma, size_t size, void *data) ++{ ++ struct resource *sram = data; ++#ifdef DEBUG ++ printk(KERN_ERR "tmio_dmabounce_check: %08x %d\n", dma, size); ++#endif ++ ++ if (dev->driver != &ohci_hcd_tmio_driver.driver) ++ return 0; ++ ++ if (sram->start <= dma && dma + size <= sram->end) ++ return 0; ++ ++ return 1; ++} ++ ++static u64 dma_mask = DMA_32BIT_MASK; ++ ++static int ohci_hcd_tmio_drv_probe(struct platform_device *dev) ++{ ++ struct resource *sram = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM); ++ ++ dev->dev.dma_mask = &dma_mask; ++ dev->dev.coherent_dma_mask = DMA_32BIT_MASK; ++ ++ dmabounce_register_checker(tmio_dmabounce_check, sram); ++ ++ return usb_hcd_tmio_probe(&ohci_tmio_hc_driver, dev); ++} ++ ++static int ohci_hcd_tmio_drv_remove(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct resource *sram = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM); ++ ++ usb_hcd_tmio_remove(hcd, dev); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ dmabounce_remove_checker(tmio_dmabounce_check, sram); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct ohci_hcd *ohci = hcd_to_ohci(hcd); ++ ++ if (time_before(jiffies, ohci->next_statechange)) ++ msleep(5); ++ ohci->next_statechange = jiffies; ++ ++ tmio_stop_hc(dev); ++ hcd->state = HC_STATE_SUSPENDED; ++ dev->dev.power.power_state = PMSG_SUSPEND; ++ ++ return 0; ++} ++ ++static int ohci_hcd_tmio_drv_resume(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct ohci_hcd *ohci = hcd_to_ohci(hcd); ++ ++ if (time_before(jiffies, ohci->next_statechange)) ++ msleep(5); ++ ohci->next_statechange = jiffies; ++ ++ tmio_start_hc(dev); ++ ++ dev->dev.power.power_state = PMSG_ON; ++ usb_hcd_resume_root_hub(hcd); ++ ++ return 0; ++} ++#endif ++ ++static struct platform_driver ohci_hcd_tmio_driver = { ++ .probe = ohci_hcd_tmio_drv_probe, ++ .remove = ohci_hcd_tmio_drv_remove, ++ .shutdown = usb_hcd_platform_shutdown, ++#ifdef CONFIG_PM ++ .suspend = ohci_hcd_tmio_drv_suspend, ++ .resume = ohci_hcd_tmio_drv_resume, ++#endif ++ .driver = { ++ .name = "tmio-ohci", ++ }, ++}; +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch new file mode 100644 index 0000000000..6ff752d1ff --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch @@ -0,0 +1,891 @@ +From b358a64c1fdd1eb80da57f919c893d910db95e37 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Sat, 29 Dec 2007 15:26:19 +0000 +Subject: [PATCH 11/64] MMC driver for TMIO devices + +--- + drivers/mmc/host/Kconfig | 6 + + drivers/mmc/host/Makefile | 1 + + drivers/mmc/host/tmio_mmc.c | 633 +++++++++++++++++++++++++++++++++++++++++++ + drivers/mmc/host/tmio_mmc.h | 205 ++++++++++++++ + 4 files changed, 845 insertions(+), 0 deletions(-) + create mode 100644 drivers/mmc/host/tmio_mmc.c + create mode 100644 drivers/mmc/host/tmio_mmc.h + +diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig +index 5fef678..f8f9b7e 100644 +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -130,3 +130,9 @@ config MMC_SPI + + If unsure, or if your system has no SPI master driver, say N. + ++config MMC_TMIO ++ tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" ++ depends on MMC ++ help ++ This provides support for the SD/MMC cell found in TC6393XB, ++ T7L66XB and also ipaq ASIC3 +diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile +index 3877c87..7ac956b 100644 +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -17,4 +17,5 @@ obj-$(CONFIG_MMC_OMAP) += omap.o + obj-$(CONFIG_MMC_AT91) += at91_mci.o + obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o + obj-$(CONFIG_MMC_SPI) += mmc_spi.o ++obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o + +diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c +new file mode 100644 +index 0000000..735c386 +--- /dev/null ++++ b/drivers/mmc/host/tmio_mmc.c +@@ -0,0 +1,633 @@ ++/* ++ * linux/drivers/mmc/tmio_mmc.c ++ * ++ * Copyright (C) 2004 Ian Molton ++ * Copyright (C) 2007 Ian Molton ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Driver for the MMC / SD / SDIO cell found in: ++ * ++ * TC6393XB TC6391XB TC6387XB T7L66XB ++ * ++ * This driver draws mainly on scattered spec sheets, Reverse engineering ++ * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit ++ * support). (Further 4 bit support from a later datasheet). ++ * ++ * TODO: ++ * Investigate using a workqueue for PIO transfers ++ * Eliminate FIXMEs ++ * SDIO support ++ * Better Power management ++ * Handle MMC errors better ++ * double buffer support ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "tmio_mmc.h" ++ ++/* ++ * Fixme - documentation conflicts on what the clock values are for the ++ * various dividers. ++ * One document I have says that its a divisor of a 24MHz clock, another 33. ++ * This probably depends on HCLK for a given platform, so we may need to ++ * require HCLK be passed to us from the MFD core. ++ * ++ */ ++ ++static void tmio_mmc_set_clock (struct tmio_mmc_host *host, int new_clock) { ++ struct tmio_mmc_cnf __iomem *cnf = host->cnf; ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ u32 clk = 0, clock; ++ ++ if (new_clock) { ++ for(clock = 46875, clk = 0x100; new_clock >= (clock<<1); ){ ++ clock <<= 1; ++ clk >>= 1; ++ } ++ if(clk & 0x1) ++ clk = 0x20000; ++ ++ clk >>= 2; ++ if(clk & 0x8000) /* For full speed we disable the divider. */ ++ writeb(0, &cnf->sd_clk_mode); ++ else ++ writeb(1, &cnf->sd_clk_mode); ++ clk |= 0x100; ++ } ++ ++ writew(clk, &ctl->sd_card_clk_ctl); ++} ++ ++static void tmio_mmc_clk_stop (struct tmio_mmc_host *host) { ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ ++ writew(0x0000, &ctl->clk_and_wait_ctl); ++ msleep(10); ++ writew(readw(&ctl->sd_card_clk_ctl) & ~0x0100, &ctl->sd_card_clk_ctl); ++ msleep(10); ++} ++ ++static void tmio_mmc_clk_start (struct tmio_mmc_host *host) { ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ ++ writew(readw(&ctl->sd_card_clk_ctl) | 0x0100, &ctl->sd_card_clk_ctl); ++ msleep(10); ++ writew(0x0100, &ctl->clk_and_wait_ctl); ++ msleep(10); ++} ++ ++static void reset(struct tmio_mmc_host *host) { ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ ++ /* FIXME - should we set stop clock reg here */ ++ writew(0x0000, &ctl->reset_sd); ++ writew(0x0000, &ctl->reset_sdio); ++ msleep(10); ++ writew(0x0001, &ctl->reset_sd); ++ writew(0x0001, &ctl->reset_sdio); ++ msleep(10); ++} ++ ++static void ++tmio_mmc_finish_request(struct tmio_mmc_host *host) ++{ ++ struct mmc_request *mrq = host->mrq; ++ ++ host->mrq = NULL; ++ host->cmd = NULL; ++ host->data = NULL; ++ ++ mmc_request_done(host->mmc, mrq); ++} ++ ++/* These are the bitmasks the tmio chip requires to implement the MMC response ++ * types. Note that R1 and R6 are the same in this scheme. */ ++#define APP_CMD 0x0040 ++#define RESP_NONE 0x0300 ++#define RESP_R1 0x0400 ++#define RESP_R1B 0x0500 ++#define RESP_R2 0x0600 ++#define RESP_R3 0x0700 ++#define DATA_PRESENT 0x0800 ++#define TRANSFER_READ 0x1000 ++#define TRANSFER_MULTI 0x2000 ++#define SECURITY_CMD 0x4000 ++ ++static void ++tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) ++{ ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ struct mmc_data *data = host->data; ++ int c = cmd->opcode; ++ ++ if(cmd->opcode == MMC_STOP_TRANSMISSION) { ++ writew(0x001, &ctl->stop_internal_action); ++ return; ++ } ++ ++ switch(mmc_resp_type(cmd)) { ++ case MMC_RSP_NONE: c |= RESP_NONE; break; ++ case MMC_RSP_R1: c |= RESP_R1; break; ++ case MMC_RSP_R1B: c |= RESP_R1B; break; ++ case MMC_RSP_R2: c |= RESP_R2; break; ++ case MMC_RSP_R3: c |= RESP_R3; break; ++ default: ++ DBG("Unknown response type %d\n", mmc_resp_type(cmd)); ++ } ++ ++ host->cmd = cmd; ++ ++/* FIXME - this seems to be ok comented out but the spec suggest this bit should ++ * be set when issuing app commands. ++ * if(cmd->flags & MMC_FLAG_ACMD) ++ * c |= APP_CMD; ++ */ ++ if(data) { ++ c |= DATA_PRESENT; ++ if(data->blocks > 1) { ++ writew(0x100, &ctl->stop_internal_action); ++ c |= TRANSFER_MULTI; ++ } ++ if(data->flags & MMC_DATA_READ) ++ c |= TRANSFER_READ; ++ } ++ ++ enable_mmc_irqs(ctl, TMIO_MASK_CMD); ++ ++ /* Fire off the command */ ++ tmio_iowrite32(cmd->arg, ctl->arg_reg); ++ writew(c, &ctl->sd_cmd); ++} ++ ++/* This chip always returns (at least?) as much data as you ask for. ++ * Im unsure what happens if you ask for less than a block. This should be ++ * looked into to ensure that a funny length read doesnt hose the controller. ++ * ++ * FIXME - this chip cannot do 1 and 2 byte data requests in 4 bit mode ++ */ ++static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) { ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ struct mmc_data *data = host->data; ++ unsigned short *buf; ++ unsigned int count; ++ unsigned long flags; ++ ++ if(!data){ ++ DBG("Spurious PIO IRQ\n"); ++ return; ++ } ++ ++ buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) + ++ host->sg_off); ++ ++ /* Ensure we dont read more than one block. The chip will interrupt us ++ * When the next block is available. ++ * FIXME - this is probably not true now IRQ handling is fixed ++ */ ++ count = host->sg_ptr->length - host->sg_off; ++ if(count > data->blksz) ++ count = data->blksz; ++ ++ DBG("count: %08x offset: %08x flags %08x\n", ++ count, host->sg_off, data->flags); ++ ++ /* Transfer the data */ ++ if(data->flags & MMC_DATA_READ) ++ readsw(&ctl->sd_data_port[0], buf, count >> 1); ++ else ++ writesw(&ctl->sd_data_port[0], buf, count >> 1); ++ ++ host->sg_off += count; ++ ++ tmio_mmc_kunmap_atomic(host, &flags); ++ ++ if(host->sg_off == host->sg_ptr->length) ++ tmio_mmc_next_sg(host); ++ ++ return; ++} ++ ++static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) { ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ struct mmc_data *data = host->data; ++ ++ host->data = NULL; ++ ++ if(!data){ ++ DBG("Spurious data end IRQ\n"); ++ return; ++ } ++ ++ /* FIXME - return correct transfer count on errors */ ++ if (!data->error) ++ data->bytes_xfered = data->blocks * data->blksz; ++ else ++ data->bytes_xfered = 0; ++ ++ DBG("Completed data request\n"); ++ ++ /*FIXME - other drivers allow an optional stop command of any given type ++ * which we dont do, as the chip can auto generate them. ++ * Perhaps we can be smarter about when to use auto CMD12 and ++ * only issue the auto request when we know this is the desired ++ * stop command, allowing fallback to the stop command the ++ * upper layers expect. For now, we do what works. ++ */ ++ ++ writew(0x000, &ctl->stop_internal_action); ++ ++ if(data->flags & MMC_DATA_READ) ++ disable_mmc_irqs(ctl, TMIO_MASK_READOP); ++ else ++ disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP); ++ ++ tmio_mmc_finish_request(host); ++} ++ ++static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) { ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ struct mmc_command *cmd = host->cmd; ++ ++ if(!host->cmd) { ++ DBG("Spurious CMD irq\n"); ++ return; ++ } ++ ++ host->cmd = NULL; ++ ++ /* This controller is sicker than the PXA one. not only do we need to ++ * drop the top 8 bits of the first response word, we also need to ++ * modify the order of the response for short response command types. ++ */ ++ ++ /* FIXME - this works but readl is wrong and will break on asic3... */ ++ cmd->resp[3] = tmio_ioread32(&ctl->response[0]); ++ cmd->resp[2] = tmio_ioread32(&ctl->response[2]); ++ cmd->resp[1] = tmio_ioread32(&ctl->response[4]); ++ cmd->resp[0] = tmio_ioread32(&ctl->response[6]); ++ ++ if(cmd->flags & MMC_RSP_136) { ++ cmd->resp[0] = (cmd->resp[0] <<8) | (cmd->resp[1] >>24); ++ cmd->resp[1] = (cmd->resp[1] <<8) | (cmd->resp[2] >>24); ++ cmd->resp[2] = (cmd->resp[2] <<8) | (cmd->resp[3] >>24); ++ cmd->resp[3] <<= 8; ++ } ++ else if(cmd->flags & MMC_RSP_R3) { ++ cmd->resp[0] = cmd->resp[3]; ++ } ++ ++ if (stat & TMIO_STAT_CMDTIMEOUT) ++ cmd->error = -ETIMEDOUT; ++ else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) ++ cmd->error = -EILSEQ; ++ ++ /* If there is data to handle we enable data IRQs here, and ++ * we will ultimatley finish the request in the data_end handler. ++ * If theres no data or we encountered an error, finish now. ++ */ ++ if(host->data && !cmd->error){ ++ if(host->data->flags & MMC_DATA_READ) ++ enable_mmc_irqs(ctl, TMIO_MASK_READOP); ++ else ++ enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP); ++ } ++ else { ++ tmio_mmc_finish_request(host); ++ } ++ ++ return; ++} ++ ++ ++static irqreturn_t tmio_mmc_irq(int irq, void *devid) ++{ ++ struct tmio_mmc_host *host = devid; ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ unsigned int ireg, irq_mask, status; ++ ++ DBG("MMC IRQ begin\n"); ++ ++ status = tmio_ioread32(ctl->status); ++ irq_mask = tmio_ioread32(ctl->irq_mask); ++ ireg = status & TMIO_MASK_IRQ & ~irq_mask; ++ ++#ifdef CONFIG_MMC_DEBUG ++ debug_status(status); ++ debug_status(ireg); ++#endif ++ if (!ireg) { ++ disable_mmc_irqs(ctl, status & ~irq_mask); ++#ifdef CONFIG_MMC_DEBUG ++ WARN("tmio_mmc: Spurious MMC irq, disabling! 0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); ++ debug_status(status); ++#endif ++ goto out; ++ } ++ ++ while (ireg) { ++ /* Card insert / remove attempts */ ++ if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)){ ++ ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE); ++ mmc_detect_change(host->mmc,0); ++ } ++ ++ /* CRC and other errors */ ++/* if (ireg & TMIO_STAT_ERR_IRQ) ++ * handled |= tmio_error_irq(host, irq, stat); ++ */ ++ ++ /* Command completion */ ++ if (ireg & TMIO_MASK_CMD) { ++ tmio_mmc_cmd_irq(host, status); ++ ack_mmc_irqs(ctl, TMIO_MASK_CMD); ++ } ++ ++ /* Data transfer */ ++ if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { ++ ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); ++ tmio_mmc_pio_irq(host); ++ } ++ ++ /* Data transfer completion */ ++ if (ireg & TMIO_STAT_DATAEND) { ++ tmio_mmc_data_irq(host); ++ ack_mmc_irqs(ctl, TMIO_STAT_DATAEND); ++ } ++ ++ /* Check status - keep going until we've handled it all */ ++ status = tmio_ioread32(ctl->status); ++ irq_mask = tmio_ioread32(ctl->irq_mask); ++ ireg = status & TMIO_MASK_IRQ & ~irq_mask; ++ ++#ifdef CONFIG_MMC_DEBUG ++ DBG("Status at end of loop: %08x\n", status); ++ debug_status(status); ++#endif ++ } ++ DBG("MMC IRQ end\n"); ++ ++out: ++ return IRQ_HANDLED; ++} ++ ++static void tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data) ++{ ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ ++ DBG("setup data transfer: blocksize %08x nr_blocks %d\n", ++ data->blksz, data->blocks); ++ ++ tmio_mmc_init_sg(host, data); ++ host->data = data; ++ ++ /* Set transfer length / blocksize */ ++ writew(data->blksz, &ctl->sd_xfer_len); ++ writew(data->blocks, &ctl->xfer_blk_count); ++} ++ ++/* Process requests from the MMC layer */ ++static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct tmio_mmc_host *host = mmc_priv(mmc); ++ ++ WARN_ON(host->mrq != NULL); ++ ++ host->mrq = mrq; ++ ++ /* If we're performing a data request we need to setup some ++ extra information */ ++ if (mrq->data) ++ tmio_mmc_start_data(host, mrq->data); ++ ++ tmio_mmc_start_command(host, mrq->cmd); ++} ++ ++/* Set MMC clock / power. ++ * Note: This controller uses a simple divider scheme therefore it cannot ++ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as ++ * MMC wont run that fast, it has to be clocked at 12MHz which is the next ++ * slowest setting. ++ */ ++static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ struct tmio_mmc_host *host = mmc_priv(mmc); ++ struct tmio_mmc_cnf __iomem *cnf = host->cnf; ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ ++ if(ios->clock) ++ tmio_mmc_set_clock (host, ios->clock); ++ ++ /* Power sequence - OFF -> ON -> UP */ ++ switch (ios->power_mode) { ++ case MMC_POWER_OFF: ++ writeb(0x00, &cnf->pwr_ctl[1]); /* power down SD bus */ ++ tmio_mmc_clk_stop(host); ++ break; ++ case MMC_POWER_ON: ++ writeb(0x02, &cnf->pwr_ctl[1]); /* power up SD bus */ ++ break; ++ case MMC_POWER_UP: ++ tmio_mmc_clk_start(host); /* start bus clock */ ++ break; ++ } ++ ++ switch (ios->bus_width) { ++ case MMC_BUS_WIDTH_1: ++ writew(0x80e0, &ctl->sd_mem_card_opt); ++ break; ++ case MMC_BUS_WIDTH_4: ++ writew(0x00e0, &ctl->sd_mem_card_opt); ++ break; ++ } ++ ++ /* Potentially we may need a 140us pause here. FIXME */ ++ udelay(140); ++} ++ ++static int tmio_mmc_get_ro(struct mmc_host *mmc) { ++ struct tmio_mmc_host *host = mmc_priv(mmc); ++ struct tmio_mmc_ctl __iomem *ctl = host->ctl; ++ ++ return (readw(&ctl->status[0]) & TMIO_STAT_WRPROTECT)?0:1; ++} ++ ++static struct mmc_host_ops tmio_mmc_ops = { ++ .request = tmio_mmc_request, ++ .set_ios = tmio_mmc_set_ios, ++ .get_ro = tmio_mmc_get_ro, ++}; ++ ++static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state) { ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct mmc_host *mmc = platform_get_drvdata(dev); ++ int ret; ++ ++ ret = mmc_suspend_host(mmc, state); ++ ++ /* Tell MFD core it can disable us now.*/ ++ if(!ret && cell->disable) ++ cell->disable(dev); ++ ++ return ret; ++} ++ ++static int tmio_mmc_resume(struct platform_device *dev) { ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct mmc_host *mmc = platform_get_drvdata(dev); ++ struct tmio_mmc_host *host = mmc_priv(mmc); ++ struct tmio_mmc_cnf __iomem *cnf = host->cnf; ++ ++ /* Enable the MMC/SD Control registers */ ++ writew(SDCREN, &cnf->cmd); ++ writel(dev->resource[0].start & 0xfffe, &cnf->ctl_base); ++ ++ /* Tell the MFD core we are ready to be enabled */ ++ if(cell->enable) ++ cell->enable(dev); ++ ++ mmc_resume_host(mmc); ++ ++ return 0; ++} ++ ++static int __devinit tmio_mmc_probe(struct platform_device *dev) ++{ ++ struct mfd_cell *cell = mfd_get_cell(dev); ++ struct tmio_mmc_cnf __iomem *cnf; ++ struct tmio_mmc_ctl __iomem *ctl; ++ struct tmio_mmc_host *host; ++ struct mmc_host *mmc; ++ int ret = -ENOMEM; ++ ++ mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev); ++ if (!mmc) { ++ goto out; ++ } ++ ++ host = mmc_priv(mmc); ++ host->mmc = mmc; ++ platform_set_drvdata(dev, mmc); /* Used so we can de-init safely. */ ++ ++ host->cnf = cnf = ioremap((unsigned long)dev->resource[1].start, ++ (unsigned long)dev->resource[1].end - ++ (unsigned long)dev->resource[1].start); ++ if(!host->cnf) ++ goto host_free; ++ ++ host->ctl = ctl = ioremap((unsigned long)dev->resource[0].start, ++ (unsigned long)dev->resource[0].end - ++ (unsigned long)dev->resource[0].start); ++ if (!host->ctl) { ++ goto unmap_cnf; ++ } ++ ++ mmc->ops = &tmio_mmc_ops; ++ mmc->caps = MMC_CAP_4_BIT_DATA; ++ mmc->f_min = 46875; ++ mmc->f_max = 24000000; ++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; ++ ++ /* Enable the MMC/SD Control registers */ ++ writew(SDCREN, &cnf->cmd); ++ writel(dev->resource[0].start & 0xfffe, &cnf->ctl_base); ++ ++ /* Tell the MFD core we are ready to be enabled */ ++ if(cell->enable) ++ cell->enable(dev); ++ ++ writeb(0x01,&cnf->pwr_ctl[2]); /* Disable SD power during suspend */ ++ writeb(0x1f, &cnf->stop_clk_ctl); /* Route clock to SDIO??? FIXME */ ++ writeb(0x0, &cnf->pwr_ctl[1]); /* Power down SD bus*/ ++ tmio_mmc_clk_stop(host); /* Stop bus clock */ ++ reset(host); /* Reset MMC HC */ ++ ++ host->irq = (unsigned long)dev->resource[2].start; ++ ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc", host); ++ if (ret){ ++ ret = -ENODEV; ++ DBG("Failed to allocate IRQ.\n"); ++ goto unmap_ctl; ++ } ++ set_irq_type(host->irq, IRQT_FALLING); ++ ++ mmc_add_host(mmc); ++ ++ printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc), ++ (unsigned long)host->ctl, host->irq); ++ ++ /* Lets unmask the IRQs we want to know about */ ++ disable_mmc_irqs(ctl, TMIO_MASK_ALL); ++ enable_mmc_irqs(ctl, TMIO_MASK_IRQ); ++ ++ return 0; ++ ++unmap_ctl: ++ iounmap(host->ctl); ++unmap_cnf: ++ iounmap(host->cnf); ++host_free: ++ mmc_free_host(mmc); ++out: ++ return ret; ++} ++ ++static int __devexit tmio_mmc_remove(struct platform_device *dev) ++{ ++ struct mmc_host *mmc = platform_get_drvdata(dev); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ if (mmc) { ++ struct tmio_mmc_host *host = mmc_priv(mmc); ++ mmc_remove_host(mmc); ++ free_irq(host->irq, host); ++ /* FIXME - we might want to consider stopping the chip here. */ ++ iounmap(host->ctl); ++ iounmap(host->cnf); ++ mmc_free_host(mmc); /* FIXME - why does this call hang ? */ ++ } ++ return 0; ++} ++ ++/* ------------------- device registration ----------------------- */ ++ ++static struct platform_driver tmio_mmc_driver = { ++ .driver = { ++ .name = "tmio-mmc", ++ }, ++ .probe = tmio_mmc_probe, ++ .remove = __devexit_p(tmio_mmc_remove), ++#ifdef CONFIG_PM ++ .suspend = tmio_mmc_suspend, ++ .resume = tmio_mmc_resume, ++#endif ++}; ++ ++ ++static int __init tmio_mmc_init(void) ++{ ++ return platform_driver_register (&tmio_mmc_driver); ++} ++ ++static void __exit tmio_mmc_exit(void) ++{ ++ platform_driver_unregister (&tmio_mmc_driver); ++} ++ ++module_init(tmio_mmc_init); ++module_exit(tmio_mmc_exit); ++ ++MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver"); ++MODULE_AUTHOR("Ian Molton "); ++MODULE_LICENSE("GPLv2"); +diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h +new file mode 100644 +index 0000000..d4d9f8f +--- /dev/null ++++ b/drivers/mmc/host/tmio_mmc.h +@@ -0,0 +1,205 @@ ++/* Definitons for use with the tmio_mmc.c ++ * ++ * (c) 2005 Ian Molton ++ * (c) 2007 Ian Molton ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++struct tmio_mmc_cnf { ++ u8 x00[4]; ++ u16 cmd; ++ u8 x01[10]; ++ u32 ctl_base; ++ u8 x02[41]; ++ u8 int_pin; ++ u8 x03[2]; ++ u8 stop_clk_ctl; ++ u8 gclk_ctl; /* Gated Clock Control */ ++ u8 sd_clk_mode; /* 0x42 */ ++ u8 x04; ++ u16 pin_status; ++ u8 x05[2]; ++ u8 pwr_ctl[3]; ++ u8 x06; ++ u8 card_detect_mode; ++ u8 x07[3]; ++ u8 sd_slot; ++ u8 x08[159]; ++ u8 ext_gclk_ctl_1; /* Extended Gated Clock Control 1 */ ++ u8 ext_gclk_ctl_2; /* Extended Gated Clock Control 2 */ ++ u8 x09[7]; ++ u8 ext_gclk_ctl_3; /* Extended Gated Clock Control 3 */ ++ u8 sd_led_en_1; ++ u8 x10[3]; ++ u8 sd_led_en_2; ++ u8 x11; ++} __attribute__ ((packed)); ++ ++#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/ ++ ++struct tmio_mmc_ctl { ++ u16 sd_cmd; ++ u16 x00; ++ u16 arg_reg[2]; ++ u16 stop_internal_action; ++ u16 xfer_blk_count; ++ u16 response[8]; ++ u16 status[2]; ++ u16 irq_mask[2]; ++ u16 sd_card_clk_ctl; ++ u16 sd_xfer_len; ++ u16 sd_mem_card_opt; ++ u16 x01; ++ u16 sd_error_detail_status[2]; ++ u16 sd_data_port[2]; ++ u16 transaction_ctl; ++ u16 x02[85]; ++ u16 reset_sd; ++ u16 x03[15]; ++ u16 sdio_regs[28]; ++ u16 clk_and_wait_ctl; ++ u16 x04[83]; ++ u16 reset_sdio; ++ u16 x05[15]; ++} __attribute__ ((packed)); ++ ++/* Definitions for values the CTRL_STATUS register can take. */ ++#define TMIO_STAT_CMDRESPEND 0x00000001 ++#define TMIO_STAT_DATAEND 0x00000004 ++#define TMIO_STAT_CARD_REMOVE 0x00000008 ++#define TMIO_STAT_CARD_INSERT 0x00000010 ++#define TMIO_STAT_SIGSTATE 0x00000020 ++#define TMIO_STAT_WRPROTECT 0x00000080 ++#define TMIO_STAT_CARD_REMOVE_A 0x00000100 ++#define TMIO_STAT_CARD_INSERT_A 0x00000200 ++#define TMIO_STAT_SIGSTATE_A 0x00000400 ++#define TMIO_STAT_CMD_IDX_ERR 0x00010000 ++#define TMIO_STAT_CRCFAIL 0x00020000 ++#define TMIO_STAT_STOPBIT_ERR 0x00040000 ++#define TMIO_STAT_DATATIMEOUT 0x00080000 ++#define TMIO_STAT_RXOVERFLOW 0x00100000 ++#define TMIO_STAT_TXUNDERRUN 0x00200000 ++#define TMIO_STAT_CMDTIMEOUT 0x00400000 ++#define TMIO_STAT_RXRDY 0x01000000 ++#define TMIO_STAT_TXRQ 0x02000000 ++#define TMIO_STAT_ILL_FUNC 0x20000000 ++#define TMIO_STAT_CMD_BUSY 0x40000000 ++#define TMIO_STAT_ILL_ACCESS 0x80000000 ++ ++/* Define some IRQ masks */ ++/* This is the mask used at reset by the chip */ ++#define TMIO_MASK_ALL 0x837f031d ++#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \ ++ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) ++#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \ ++ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) ++#define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ ++ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) ++#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) ++ ++#define enable_mmc_irqs(ctl, i) \ ++ do { \ ++ u32 mask;\ ++ mask = tmio_ioread32((ctl)->irq_mask); \ ++ mask &= ~((i) & TMIO_MASK_IRQ); \ ++ tmio_iowrite32(mask, (ctl)->irq_mask); \ ++ } while (0) ++ ++#define disable_mmc_irqs(ctl, i) \ ++ do { \ ++ u32 mask;\ ++ mask = tmio_ioread32((ctl)->irq_mask); \ ++ mask |= ((i) & TMIO_MASK_IRQ); \ ++ tmio_iowrite32(mask, (ctl)->irq_mask); \ ++ } while (0) ++ ++#define ack_mmc_irqs(ctl, i) \ ++ do { \ ++ u32 mask;\ ++ mask = tmio_ioread32((ctl)->status); \ ++ mask &= ~((i) & TMIO_MASK_IRQ); \ ++ tmio_iowrite32(mask, (ctl)->status); \ ++ } while (0) ++ ++ ++struct tmio_mmc_host { ++ struct tmio_mmc_cnf __iomem *cnf; ++ struct tmio_mmc_ctl __iomem *ctl; ++ struct mmc_command *cmd; ++ struct mmc_request *mrq; ++ struct mmc_data *data; ++ struct mmc_host *mmc; ++ int irq; ++ ++ /* pio related stuff */ ++ struct scatterlist *sg_ptr; ++ unsigned int sg_len; ++ unsigned int sg_off; ++}; ++ ++#include ++#include ++ ++static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) ++{ ++ host->sg_len = data->sg_len; ++ host->sg_ptr = data->sg; ++ host->sg_off = 0; ++} ++ ++static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host) ++{ ++ host->sg_ptr++; ++ host->sg_off = 0; ++ return --host->sg_len; ++} ++ ++static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host, unsigned long *flags) ++{ ++ struct scatterlist *sg = host->sg_ptr; ++ ++ local_irq_save(*flags); ++ return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; ++} ++ ++static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host, unsigned long *flags) ++{ ++ kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ); ++ local_irq_restore(*flags); ++} ++ ++#ifdef CONFIG_MMC_DEBUG ++#define DBG(args...) printk(args) ++ ++void debug_status(u32 status){ ++ printk("status: %08x = ", status); ++ if(status & TMIO_STAT_CARD_REMOVE) printk("Card_removed "); ++ if(status & TMIO_STAT_CARD_INSERT) printk("Card_insert "); ++ if(status & TMIO_STAT_SIGSTATE) printk("Sigstate "); ++ if(status & TMIO_STAT_WRPROTECT) printk("Write_protect "); ++ if(status & TMIO_STAT_CARD_REMOVE_A) printk("Card_remove_A "); ++ if(status & TMIO_STAT_CARD_INSERT_A) printk("Card_insert_A "); ++ if(status & TMIO_STAT_SIGSTATE_A) printk("Sigstate_A "); ++ if(status & TMIO_STAT_CMD_IDX_ERR) printk("Cmd_IDX_Err "); ++ if(status & TMIO_STAT_STOPBIT_ERR) printk("Stopbit_ERR "); ++ if(status & TMIO_STAT_ILL_FUNC) printk("ILLEGAL_FUNC "); ++ if(status & TMIO_STAT_CMD_BUSY) printk("CMD_BUSY "); ++ if(status & TMIO_STAT_CMDRESPEND) printk("Response_end "); ++ if(status & TMIO_STAT_DATAEND) printk("Data_end "); ++ if(status & TMIO_STAT_CRCFAIL) printk("CRC_failure "); ++ if(status & TMIO_STAT_DATATIMEOUT) printk("Data_timeout "); ++ if(status & TMIO_STAT_CMDTIMEOUT) printk("Command_timeout "); ++ if(status & TMIO_STAT_RXOVERFLOW) printk("RX_OVF "); ++ if(status & TMIO_STAT_TXUNDERRUN) printk("TX_UND "); ++ if(status & TMIO_STAT_RXRDY) printk("RX_rdy "); ++ if(status & TMIO_STAT_TXRQ) printk("TX_req "); ++ if(status & TMIO_STAT_ILL_ACCESS) printk("ILLEGAL_ACCESS "); ++ printk("\n"); ++} ++#else ++#define DBG(fmt,args...) do { } while (0) ++#endif +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0012-Tosa-keyboard-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0012-Tosa-keyboard-support.patch new file mode 100644 index 0000000000..0fa10ebd4c --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0012-Tosa-keyboard-support.patch @@ -0,0 +1,593 @@ +From 6d377e8f80ce421e6842ac5f42081345fbc70002 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 01:27:41 +0300 +Subject: [PATCH 12/64] Tosa keyboard support + +Support keyboard on tosa (Sharp Zaurus SL-6000x). +Largely based on patches by Dirk Opfer. + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/tosa.c | 43 ++++ + drivers/input/keyboard/Kconfig | 21 ++ + drivers/input/keyboard/Makefile | 1 + + drivers/input/keyboard/tosakbd.c | 415 ++++++++++++++++++++++++++++++++++++++ + include/asm-arm/arch-pxa/tosa.h | 30 +++ + 5 files changed, 510 insertions(+), 0 deletions(-) + create mode 100644 drivers/input/keyboard/tosakbd.c + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index 240fd04..e7e0f52 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -21,6 +21,8 @@ + #include + #include + #include ++#include ++#include + + #include + #include +@@ -253,6 +255,46 @@ static struct platform_device tosakbd_device = { + .id = -1, + }; + ++static struct gpio_keys_button tosa_gpio_keys[] = { ++ { ++ .type = EV_PWR, ++ .code = KEY_SUSPEND, ++ .gpio = TOSA_GPIO_ON_KEY, ++ .desc = "On key", ++ .wakeup = 1, ++ .active_low = 1, ++ }, ++ { ++ .type = EV_KEY, ++ .code = TOSA_KEY_RECORD, ++ .gpio = TOSA_GPIO_RECORD_BTN, ++ .desc = "Record Button", ++ .wakeup = 1, ++ .active_low = 1, ++ }, ++ { ++ .type = EV_KEY, ++ .code = TOSA_KEY_SYNC, ++ .gpio = TOSA_GPIO_SYNC, ++ .desc = "Sync Button", ++ .wakeup = 1, ++ .active_low = 1, ++ }, ++}; ++ ++static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = { ++ .buttons = tosa_gpio_keys, ++ .nbuttons = ARRAY_SIZE(tosa_gpio_keys), ++}; ++ ++static struct platform_device tosa_gpio_keys_device = { ++ .name = "gpio-keys", ++ .id = -1, ++ .dev = { ++ .platform_data = &tosa_gpio_keys_platform_data, ++ }, ++}; ++ + /* + * Tosa LEDs + */ +@@ -265,6 +307,7 @@ static struct platform_device *devices[] __initdata = { + &tosascoop_device, + &tosascoop_jc_device, + &tosakbd_device, ++ &tosa_gpio_keys_device, + &tosaled_device, + }; + +diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig +index 086d58c..0c32762 100644 +--- a/drivers/input/keyboard/Kconfig ++++ b/drivers/input/keyboard/Kconfig +@@ -154,6 +154,27 @@ config KEYBOARD_SPITZ + To compile this driver as a module, choose M here: the + module will be called spitzkbd. + ++config KEYBOARD_TOSA ++ tristate "Tosa keyboard" ++ depends on MACH_TOSA ++ default y ++ help ++ Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) ++ ++ To compile this driver as a module, choose M here: the ++ module will be called tosakbd. ++ ++config KEYBOARD_TOSA_USE_EXT_KEYCODES ++ bool "Tosa keyboard: use extended keycodes" ++ depends on KEYBOARD_TOSA ++ default n ++ help ++ Say Y here to enable the tosa keyboard driver to generate extended ++ (>= 127) keycodes. Be aware, that they can't be correctly interpreted ++ by either console keyboard driver or by Kdrive keybd driver. ++ ++ Say Y only if you know, what you are doing! ++ + config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA +diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile +index e97455f..6caa065 100644 +--- a/drivers/input/keyboard/Makefile ++++ b/drivers/input/keyboard/Makefile +@@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o + obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o + obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o + obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o ++obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o + obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o + obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o + obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c +new file mode 100644 +index 0000000..3884d1e +--- /dev/null ++++ b/drivers/input/keyboard/tosakbd.c +@@ -0,0 +1,415 @@ ++/* ++ * Keyboard driver for Sharp Tosa models (SL-6000x) ++ * ++ * Copyright (c) 2005 Dirk Opfer ++ * Copyright (c) 2007 Dmitry Baryshkov ++ * ++ * Based on xtkbd.c/locomkbd.c/corgikbd.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define KB_ROWMASK(r) (1 << (r)) ++#define SCANCODE(r, c) (((r)<<4) + (c) + 1) ++#define NR_SCANCODES SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1 ++ ++#define SCAN_INTERVAL (HZ/10) ++ ++#define KB_DISCHARGE_DELAY 10 ++#define KB_ACTIVATE_DELAY 10 ++ ++static unsigned int tosakbd_keycode[NR_SCANCODES] = { ++0, ++0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P, ++0, 0, 0, 0, 0, 0, 0, 0, ++KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA, ++0, 0, 0, 0, 0, 0, 0, 0, ++KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT, ++0, 0, 0, 0, 0, 0, 0, 0, ++KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK, ++KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0, ++KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT, ++0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, ++KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0, ++0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0, ++KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT, ++0, 0, 0, ++}; ++ ++struct tosakbd { ++ unsigned int keycode[ARRAY_SIZE(tosakbd_keycode)]; ++ struct input_dev *input; ++ ++ spinlock_t lock; /* protect kbd scanning */ ++ struct timer_list timer; ++}; ++ ++ ++/* Helper functions for reading the keyboard matrix ++ * Note: We should really be using pxa_gpio_mode to alter GPDR but it ++ * requires a function call per GPIO bit which is excessive ++ * when we need to access 12 bits at once, multiple times. ++ * These functions must be called within local_irq_save()/local_irq_restore() ++ * or similar. ++ */ ++#define GET_ROWS_STATUS(c) ((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT) ++ ++static inline void tosakbd_discharge_all(void) ++{ ++ /* STROBE All HiZ */ ++ GPCR1 = TOSA_GPIO_HIGH_STROBE_BIT; ++ GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT; ++ GPCR2 = TOSA_GPIO_LOW_STROBE_BIT; ++ GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT; ++} ++ ++static inline void tosakbd_activate_all(void) ++{ ++ /* STROBE ALL -> High */ ++ GPSR1 = TOSA_GPIO_HIGH_STROBE_BIT; ++ GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT; ++ GPSR2 = TOSA_GPIO_LOW_STROBE_BIT; ++ GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT; ++ ++ udelay(KB_DISCHARGE_DELAY); ++ ++ /* STATE CLEAR */ ++ GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT; ++} ++ ++static inline void tosakbd_activate_col(int col) ++{ ++ if (col <= 5) { ++ /* STROBE col -> High, not col -> HiZ */ ++ GPSR1 = TOSA_GPIO_STROBE_BIT(col); ++ GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); ++ } else { ++ /* STROBE col -> High, not col -> HiZ */ ++ GPSR2 = TOSA_GPIO_STROBE_BIT(col); ++ GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); ++ } ++} ++ ++static inline void tosakbd_reset_col(int col) ++{ ++ if (col <= 5) { ++ /* STROBE col -> Low */ ++ GPCR1 = TOSA_GPIO_STROBE_BIT(col); ++ /* STROBE col -> out, not col -> HiZ */ ++ GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); ++ } else { ++ /* STROBE col -> Low */ ++ GPCR2 = TOSA_GPIO_STROBE_BIT(col); ++ /* STROBE col -> out, not col -> HiZ */ ++ GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); ++ } ++} ++/* ++ * The tosa keyboard only generates interrupts when a key is pressed. ++ * So when a key is pressed, we enable a timer. This timer scans the ++ * keyboard, and this is how we detect when the key is released. ++ */ ++ ++/* Scan the hardware keyboard and push any changes up through the input layer */ ++static void tosakbd_scankeyboard(struct platform_device *dev) ++{ ++ struct tosakbd *tosakbd = platform_get_drvdata(dev); ++ unsigned int row, col, rowd; ++ unsigned long flags; ++ unsigned int num_pressed = 0; ++ ++ spin_lock_irqsave(&tosakbd->lock, flags); ++ ++ for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) { ++ /* ++ * Discharge the output driver capacitatance ++ * in the keyboard matrix. (Yes it is significant..) ++ */ ++ tosakbd_discharge_all(); ++ udelay(KB_DISCHARGE_DELAY); ++ ++ tosakbd_activate_col(col); ++ udelay(KB_ACTIVATE_DELAY); ++ ++ rowd = GET_ROWS_STATUS(col); ++ ++ for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) { ++ unsigned int scancode, pressed; ++ scancode = SCANCODE(row, col); ++ pressed = rowd & KB_ROWMASK(row); ++ ++ if (pressed && !tosakbd->keycode[scancode]) ++ dev_warn(&dev->dev, ++ "unhandled scancode: 0x%02x\n", ++ scancode); ++ ++ input_report_key(tosakbd->input, ++ tosakbd->keycode[scancode], ++ pressed); ++ if (pressed) ++ num_pressed++; ++ } ++ ++ tosakbd_reset_col(col); ++ } ++ ++ tosakbd_activate_all(); ++ ++ input_sync(tosakbd->input); ++ ++ /* if any keys are pressed, enable the timer */ ++ if (num_pressed) ++ mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL); ++ ++ spin_unlock_irqrestore(&tosakbd->lock, flags); ++} ++ ++/* ++ * tosa keyboard interrupt handler. ++ */ ++static irqreturn_t tosakbd_interrupt(int irq, void *__dev) ++{ ++ struct platform_device *dev = __dev; ++ struct tosakbd *tosakbd = platform_get_drvdata(dev); ++ ++ if (!timer_pending(&tosakbd->timer)) { ++ /** wait chattering delay **/ ++ udelay(20); ++ tosakbd_scankeyboard(dev); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/* ++ * tosa timer checking for released keys ++ */ ++static void tosakbd_timer_callback(unsigned long __dev) ++{ ++ struct platform_device *dev = (struct platform_device *)__dev; ++ tosakbd_scankeyboard(dev); ++} ++ ++#ifdef CONFIG_PM ++static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct tosakbd *tosakbd = platform_get_drvdata(dev); ++ ++ del_timer_sync(&tosakbd->timer); ++ ++ return 0; ++} ++ ++static int tosakbd_resume(struct platform_device *dev) ++{ ++ tosakbd_scankeyboard(dev); ++ ++ return 0; ++} ++#else ++#define tosakbd_suspend NULL ++#define tosakbd_resume NULL ++#endif ++ ++static int __devinit tosakbd_probe(struct platform_device *pdev) { ++ ++ int i; ++ struct tosakbd *tosakbd; ++ struct input_dev *input_dev; ++ int error; ++ ++ tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL); ++ if (!tosakbd) ++ return -ENOMEM; ++ ++ input_dev = input_allocate_device(); ++ if (!input_dev) { ++ kfree(tosakbd); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(pdev, tosakbd); ++ ++ spin_lock_init(&tosakbd->lock); ++ ++ /* Init Keyboard rescan timer */ ++ init_timer(&tosakbd->timer); ++ tosakbd->timer.function = tosakbd_timer_callback; ++ tosakbd->timer.data = (unsigned long) pdev; ++ ++ tosakbd->input = input_dev; ++ ++ input_set_drvdata(input_dev, tosakbd); ++ input_dev->name = "Tosa Keyboard"; ++ input_dev->phys = "tosakbd/input0"; ++ input_dev->dev.parent = &pdev->dev; ++ ++ input_dev->id.bustype = BUS_HOST; ++ input_dev->id.vendor = 0x0001; ++ input_dev->id.product = 0x0001; ++ input_dev->id.version = 0x0100; ++ ++ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); ++ input_dev->keycode = tosakbd->keycode; ++ input_dev->keycodesize = sizeof(unsigned int); ++ input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode); ++ ++ memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode)); ++ ++ for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++) ++ __set_bit(tosakbd->keycode[i], input_dev->keybit); ++ clear_bit(0, input_dev->keybit); ++ ++ /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ ++ for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { ++ int gpio = TOSA_GPIO_KEY_SENSE(i); ++ int irq; ++ error = gpio_request(gpio, "tosakbd"); ++ if (error < 0) { ++ printk(KERN_ERR "tosakbd: failed to request GPIO %d, " ++ " error %d\n", gpio, error); ++ goto fail; ++ } ++ ++ error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i)); ++ if (error < 0) { ++ printk(KERN_ERR "tosakbd: failed to configure input" ++ " direction for GPIO %d, error %d\n", ++ gpio, error); ++ gpio_free(gpio); ++ goto fail; ++ } ++ ++ irq = gpio_to_irq(gpio); ++ if (irq < 0) { ++ error = irq; ++ printk(KERN_ERR "gpio-keys: Unable to get irq number" ++ " for GPIO %d, error %d\n", ++ gpio, error); ++ gpio_free(gpio); ++ goto fail; ++ } ++ ++ error = request_irq(irq, tosakbd_interrupt, ++ IRQF_DISABLED | IRQF_TRIGGER_RISING, ++ "tosakbd", pdev); ++ ++ if (error) { ++ printk("tosakbd: Can't get IRQ: %d: error %d!\n", ++ irq, error); ++ gpio_free(gpio); ++ goto fail; ++ } ++ } ++ ++ /* Set Strobe lines as outputs - set high */ ++ for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) { ++ int gpio = TOSA_GPIO_KEY_STROBE(i); ++ error = gpio_request(gpio, "tosakbd"); ++ if (error < 0) { ++ printk(KERN_ERR "tosakbd: failed to request GPIO %d, " ++ " error %d\n", gpio, error); ++ goto fail2; ++ } ++ ++ error = gpio_direction_output(gpio, 1); ++ if (error < 0) { ++ printk(KERN_ERR "tosakbd: failed to configure input" ++ " direction for GPIO %d, error %d\n", ++ gpio, error); ++ gpio_free(gpio); ++ goto fail; ++ } ++ ++ } ++ ++ error = input_register_device(input_dev); ++ if (error) { ++ printk(KERN_ERR "tosakbd: Unable to register input device, " ++ "error: %d\n", error); ++ goto fail; ++ } ++ ++ printk(KERN_INFO "input: Tosa Keyboard Registered\n"); ++ ++ return 0; ++ ++fail2: ++ while (--i >= 0) ++ gpio_free(TOSA_GPIO_KEY_STROBE(i)); ++ ++ i = TOSA_KEY_SENSE_NUM; ++fail: ++ while (--i >= 0) { ++ free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev); ++ gpio_free(TOSA_GPIO_KEY_SENSE(i)); ++ } ++ ++ platform_set_drvdata(pdev, NULL); ++ input_free_device(input_dev); ++ kfree(tosakbd); ++ ++ return error; ++} ++ ++static int __devexit tosakbd_remove(struct platform_device *dev) { ++ ++ int i; ++ struct tosakbd *tosakbd = platform_get_drvdata(dev); ++ ++ for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) ++ gpio_free(TOSA_GPIO_KEY_STROBE(i)); ++ ++ for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { ++ free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev); ++ gpio_free(TOSA_GPIO_KEY_SENSE(i)); ++ } ++ ++ del_timer_sync(&tosakbd->timer); ++ ++ input_unregister_device(tosakbd->input); ++ ++ kfree(tosakbd); ++ ++ return 0; ++} ++ ++static struct platform_driver tosakbd_driver = { ++ .probe = tosakbd_probe, ++ .remove = __devexit_p(tosakbd_remove), ++ .suspend = tosakbd_suspend, ++ .resume = tosakbd_resume, ++ .driver = { ++ .name = "tosa-keyboard", ++ }, ++}; ++ ++static int __devinit tosakbd_init(void) ++{ ++ return platform_driver_register(&tosakbd_driver); ++} ++ ++static void __exit tosakbd_exit(void) ++{ ++ platform_driver_unregister(&tosakbd_driver); ++} ++ ++module_init(tosakbd_init); ++module_exit(tosakbd_exit); ++ ++MODULE_AUTHOR("Dirk Opfer "); ++MODULE_DESCRIPTION("Tosa Keyboard Driver"); ++MODULE_LICENSE("GPL v2"); +diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h +index c3364a2..c05e4fa 100644 +--- a/include/asm-arm/arch-pxa/tosa.h ++++ b/include/asm-arm/arch-pxa/tosa.h +@@ -163,4 +163,34 @@ + + extern struct platform_device tosascoop_jc_device; + extern struct platform_device tosascoop_device; ++ ++#define TOSA_KEY_SYNC KEY_102ND /* ??? */ ++ ++ ++#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES ++#define TOSA_KEY_RECORD KEY_YEN ++#define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA ++#define TOSA_KEY_CANCEL KEY_ESC ++#define TOSA_KEY_CENTER KEY_HIRAGANA ++#define TOSA_KEY_OK KEY_HENKAN ++#define TOSA_KEY_CALENDAR KEY_KATAKANAHIRAGANA ++#define TOSA_KEY_HOMEPAGE KEY_HANGEUL ++#define TOSA_KEY_LIGHT KEY_MUHENKAN ++#define TOSA_KEY_MENU KEY_HANJA ++#define TOSA_KEY_FN KEY_RIGHTALT ++#define TOSA_KEY_MAIL KEY_ZENKAKUHANKAKU ++#else ++#define TOSA_KEY_RECORD KEY_RECORD ++#define TOSA_KEY_ADDRESSBOOK KEY_ADDRESSBOOK ++#define TOSA_KEY_CANCEL KEY_CANCEL ++#define TOSA_KEY_CENTER KEY_SELECT /* ??? */ ++#define TOSA_KEY_OK KEY_OK ++#define TOSA_KEY_CALENDAR KEY_CALENDAR ++#define TOSA_KEY_HOMEPAGE KEY_HOMEPAGE ++#define TOSA_KEY_LIGHT KEY_KBDILLUMTOGGLE ++#define TOSA_KEY_MENU KEY_MENU ++#define TOSA_KEY_FN KEY_FN ++#define TOSA_KEY_MAIL KEY_MAIL ++#endif ++ + #endif /* _ASM_ARCH_TOSA_H_ */ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0013-USB-gadget-pxa2xx_udc-supports-inverted-vbus.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0013-USB-gadget-pxa2xx_udc-supports-inverted-vbus.patch new file mode 100644 index 0000000000..082a2c72b8 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0013-USB-gadget-pxa2xx_udc-supports-inverted-vbus.patch @@ -0,0 +1,61 @@ +From 18c1a92a09faf75ebdac7ac471c741a6622cf3e2 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 01:27:49 +0300 +Subject: [PATCH 13/64] USB: gadget: pxa2xx_udc supports inverted vbus + +Some boards (like e.g. Tosa) invert the VBUS-detection signal: +it's low when a host is supplying VBUS, and high otherwise. +Allow specifying whether gpio_vbus value is inverted. + +Signed-off-by: Dmitry Baryshkov +Signed-off-by: David Brownell +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/gadget/pxa2xx_udc.c | 9 +++++++-- + include/asm-arm/mach/udc_pxa2xx.h | 2 ++ + 2 files changed, 9 insertions(+), 2 deletions(-) + +diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c +index 3173b39..4f7d4ef 100644 +--- a/drivers/usb/gadget/pxa2xx_udc.c ++++ b/drivers/usb/gadget/pxa2xx_udc.c +@@ -127,8 +127,10 @@ static int is_vbus_present(void) + { + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + +- if (mach->gpio_vbus) +- return gpio_get_value(mach->gpio_vbus); ++ if (mach->gpio_vbus) { ++ int value = gpio_get_value(mach->gpio_vbus); ++ return mach->gpio_vbus_inverted ? !value : value; ++ } + if (mach->udc_is_connected) + return mach->udc_is_connected(); + return 1; +@@ -1397,6 +1399,9 @@ static irqreturn_t udc_vbus_irq(int irq, void *_dev) + struct pxa2xx_udc *dev = _dev; + int vbus = gpio_get_value(dev->mach->gpio_vbus); + ++ if (dev->mach->gpio_vbus_inverted) ++ vbus = !vbus; ++ + pxa2xx_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; + } +diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h +index ff0a957..f191e14 100644 +--- a/include/asm-arm/mach/udc_pxa2xx.h ++++ b/include/asm-arm/mach/udc_pxa2xx.h +@@ -19,7 +19,9 @@ struct pxa2xx_udc_mach_info { + * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane + * VBUS IRQ and omit the methods above. Store the GPIO number + * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. ++ * Note that sometimes the signals go through inverters... + */ ++ bool gpio_vbus_inverted; + u16 gpio_vbus; /* high == vbus present */ + u16 gpio_pullup; /* high == pullup activated */ + }; +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0014-tosa_udc_use_gpio_vbus.patch.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0014-tosa_udc_use_gpio_vbus.patch.patch new file mode 100644 index 0000000000..98783efea0 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0014-tosa_udc_use_gpio_vbus.patch.patch @@ -0,0 +1,38 @@ +From 932ff38b17c7847c43e2bad01b510b64c27f9810 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 01:27:59 +0300 +Subject: [PATCH 14/64] tosa_udc_use_gpio_vbus.patch + +Use gpio_vbus instead of udc_is_connected for udc on tosa. + +Signed-off-by: Dmitry Baryshkov +Acked-by: Russell King +--- + arch/arm/mach-pxa/tosa.c | 9 ++------- + 1 files changed, 2 insertions(+), 7 deletions(-) + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index e7e0f52..5268e94 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -159,15 +159,10 @@ static void tosa_udc_command(int cmd) + } + } + +-static int tosa_udc_is_connected(void) +-{ +- return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0); +-} +- +- + static struct pxa2xx_udc_mach_info udc_info __initdata = { + .udc_command = tosa_udc_command, +- .udc_is_connected = tosa_udc_is_connected, ++ .gpio_vbus = TOSA_GPIO_USB_IN, ++ .gpio_vbus_inverted = 1, + }; + + /* +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0015-sharpsl-export-params.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0015-sharpsl-export-params.patch new file mode 100644 index 0000000000..f8e57e8306 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0015-sharpsl-export-params.patch @@ -0,0 +1,32 @@ +From bba216220d17d1091413e82c9924ac5614402c05 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Wed, 9 Jan 2008 01:28:06 +0300 +Subject: [PATCH 15/64] sharpsl export params + +--- + arch/arm/common/sharpsl_param.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c +index aad4d94..d56c932 100644 +--- a/arch/arm/common/sharpsl_param.c ++++ b/arch/arm/common/sharpsl_param.c +@@ -12,6 +12,7 @@ + */ + + #include ++#include + #include + #include + +@@ -36,6 +37,7 @@ + #define PHAD_MAGIC MAGIC_CHG('P','H','A','D') + + struct sharpsl_param_info sharpsl_param; ++EXPORT_SYMBOL(sharpsl_param); + + void sharpsl_save_param(void) + { +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch new file mode 100644 index 0000000000..d73de0698c --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch @@ -0,0 +1,44 @@ +From 0fe7b491b70efafbd41185f8e95a3eada65984a1 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Mon, 28 Jan 2008 01:49:28 +0300 +Subject: [PATCH 16/64] This patch fixes the pxa25x clocks definitions to add hwuart. + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/pxa25x.c | 9 ++++++++- + 1 files changed, 8 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c +index 9732d5d..006a6e0 100644 +--- a/arch/arm/mach-pxa/pxa25x.c ++++ b/arch/arm/mach-pxa/pxa25x.c +@@ -111,11 +111,14 @@ static const struct clkops clk_pxa25x_lcd_ops = { + * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz + * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) + */ ++static struct clk pxa25x_hwuart_clk = ++ INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev) ++; ++ + static struct clk pxa25x_clks[] = { + INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev), + INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev), + INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), +- INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), + INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL), + INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), + INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), +@@ -303,6 +306,10 @@ static int __init pxa25x_init(void) + { + int ret = 0; + ++ /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ ++ if (cpu_is_pxa25x()) ++ clks_register(&pxa25x_hwuart_clk, 1); ++ + if (cpu_is_pxa21x() || cpu_is_pxa25x()) { + clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); + +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch new file mode 100644 index 0000000000..5163361da3 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch @@ -0,0 +1,280 @@ +From 71857e8f6c4a8d2d3eac3037f02e0c30c6fdb37e Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 01:43:28 +0300 +Subject: [PATCH 17/64] Convert pxa2xx UDC to use debugfs + +Use debugfs instead of /proc/driver/udc + +Signed-off-by: Dmitry Baryshkov +--- + drivers/usb/gadget/pxa2xx_udc.c | 100 +++++++++++++++++---------------------- + drivers/usb/gadget/pxa2xx_udc.h | 10 +++- + 2 files changed, 51 insertions(+), 59 deletions(-) + +diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c +index 4f7d4ef..2900556 100644 +--- a/drivers/usb/gadget/pxa2xx_udc.c ++++ b/drivers/usb/gadget/pxa2xx_udc.c +@@ -38,13 +38,14 @@ + #include + #include + #include +-#include + #include + #include + #include + #include + #include + #include ++#include ++#include + + #include + #include +@@ -993,45 +994,36 @@ static const struct usb_gadget_ops pxa2xx_udc_ops = { + + /*-------------------------------------------------------------------------*/ + +-#ifdef CONFIG_USB_GADGET_DEBUG_FILES +- +-static const char proc_node_name [] = "driver/udc"; ++#ifdef CONFIG_USB_GADGET_DEBUG_FS + ++static struct pxa2xx_udc memory; + static int +-udc_proc_read(char *page, char **start, off_t off, int count, +- int *eof, void *_dev) ++udc_seq_show(struct seq_file *m, void *d) + { +- char *buf = page; +- struct pxa2xx_udc *dev = _dev; +- char *next = buf; +- unsigned size = count; ++ struct pxa2xx_udc *dev = m->private; + unsigned long flags; +- int i, t; ++ int i; + u32 tmp; + +- if (off != 0) +- return 0; ++ ++ BUG_ON(dev == NULL); + + local_irq_save(flags); + + /* basic device status */ +- t = scnprintf(next, size, DRIVER_DESC "\n" ++ seq_printf(m, DRIVER_DESC "\n" + "%s version: %s\nGadget driver: %s\nHost %s\n\n", + driver_name, DRIVER_VERSION SIZE_STR "(pio)", + dev->driver ? dev->driver->driver.name : "(none)", + is_vbus_present() ? "full speed" : "disconnected"); +- size -= t; +- next += t; + + /* registers for device and ep0 */ +- t = scnprintf(next, size, ++ seq_printf(m, + "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", + UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); +- size -= t; +- next += t; + + tmp = UDCCR; +- t = scnprintf(next, size, ++ seq_printf(m, + "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCR_REM) ? " rem" : "", + (tmp & UDCCR_RSTIR) ? " rstir" : "", +@@ -1041,11 +1033,9 @@ udc_proc_read(char *page, char **start, off_t off, int count, + (tmp & UDCCR_RSM) ? " rsm" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : ""); +- size -= t; +- next += t; + + tmp = UDCCS0; +- t = scnprintf(next, size, ++ seq_printf(m, + "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCS0_SA) ? " sa" : "", + (tmp & UDCCS0_RNE) ? " rne" : "", +@@ -1055,28 +1045,22 @@ udc_proc_read(char *page, char **start, off_t off, int count, + (tmp & UDCCS0_FTF) ? " ftf" : "", + (tmp & UDCCS0_IPR) ? " ipr" : "", + (tmp & UDCCS0_OPR) ? " opr" : ""); +- size -= t; +- next += t; + + if (dev->has_cfr) { + tmp = UDCCFR; +- t = scnprintf(next, size, ++ seq_printf(m, + "udccfr %02X =%s%s\n", tmp, + (tmp & UDCCFR_AREN) ? " aren" : "", + (tmp & UDCCFR_ACM) ? " acm" : ""); +- size -= t; +- next += t; + } + + if (!is_vbus_present() || !dev->driver) + goto done; + +- t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", ++ seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", + dev->stats.write.bytes, dev->stats.write.ops, + dev->stats.read.bytes, dev->stats.read.ops, + dev->stats.irqs); +- size -= t; +- next += t; + + /* dump endpoint queues */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { +@@ -1090,55 +1074,57 @@ udc_proc_read(char *page, char **start, off_t off, int count, + if (!d) + continue; + tmp = *dev->ep [i].reg_udccs; +- t = scnprintf(next, size, ++ seq_printf(m, + "%s max %d %s udccs %02x irqs %lu\n", + ep->ep.name, le16_to_cpu (d->wMaxPacketSize), + "pio", tmp, ep->pio_irqs); + /* TODO translate all five groups of udccs bits! */ + + } else /* ep0 should only have one transfer queued */ +- t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n", ++ seq_printf(m, "ep0 max 16 pio irqs %lu\n", + ep->pio_irqs); +- if (t <= 0 || t > size) +- goto done; +- size -= t; +- next += t; + + if (list_empty(&ep->queue)) { +- t = scnprintf(next, size, "\t(nothing queued)\n"); +- if (t <= 0 || t > size) +- goto done; +- size -= t; +- next += t; ++ seq_printf(m, "\t(nothing queued)\n"); + continue; + } + list_for_each_entry(req, &ep->queue, queue) { +- t = scnprintf(next, size, ++ seq_printf(m, + "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); +- if (t <= 0 || t > size) +- goto done; +- size -= t; +- next += t; + } + } + + done: + local_irq_restore(flags); +- *eof = 1; +- return count - size; ++ return 0; + } + +-#define create_proc_files() \ +- create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev) +-#define remove_proc_files() \ +- remove_proc_entry(proc_node_name, NULL) ++static int ++udc_debugfs_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, udc_seq_show, inode->i_private); ++} ++ ++static const struct file_operations debug_fops = { ++ .open = udc_debugfs_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++ .owner = THIS_MODULE, ++}; ++ ++#define create_debug_files(dev) \ ++ dev->debugfs_udc = debugfs_create_file(dev->gadget.name, S_IRUGO, \ ++ NULL, dev, &debug_fops) ++#define remove_debug_files(dev) \ ++ if (dev->debugfs_udc) debugfs_remove(dev->debugfs_udc) + + #else /* !CONFIG_USB_GADGET_DEBUG_FILES */ + +-#define create_proc_files() do {} while (0) +-#define remove_proc_files() do {} while (0) ++#define create_debug_files(dev) do {} while (0) ++#define remove_debug_files(dev) do {} while (0) + + #endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +@@ -2245,7 +2231,7 @@ lubbock_fail0: + goto err_vbus_irq; + } + } +- create_proc_files(); ++ create_debug_files(dev); + + return 0; + +@@ -2282,7 +2268,7 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) + return -EBUSY; + + udc_disable(dev); +- remove_proc_files(); ++ remove_debug_files(dev); + + if (dev->got_irq) { + free_irq(platform_get_irq(pdev, 0), dev); +diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h +index 1db46d7..c08b1a2 100644 +--- a/drivers/usb/gadget/pxa2xx_udc.h ++++ b/drivers/usb/gadget/pxa2xx_udc.h +@@ -129,6 +129,10 @@ struct pxa2xx_udc { + struct pxa2xx_udc_mach_info *mach; + u64 dma_mask; + struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS]; ++ ++#ifdef CONFIG_USB_GADGET_DEBUG_FS ++ struct dentry *debugfs_udc; ++#endif + }; + + /*-------------------------------------------------------------------------*/ +@@ -153,6 +157,8 @@ static struct pxa2xx_udc *the_controller; + + #ifdef DEBUG + ++static int is_vbus_present(void); ++ + static const char *state_name[] = { + "EP0_IDLE", + "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", +@@ -207,8 +213,7 @@ dump_state(struct pxa2xx_udc *dev) + unsigned i; + + DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", +- //is_usb_connected() ? "host " : "disconnected", +- "host ", ++ is_vbus_present() ? "host " : "disconnected", + state_name[dev->ep0state], + UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); + dump_udccr("udccr"); +@@ -224,7 +230,7 @@ dump_state(struct pxa2xx_udc *dev) + } else + DMSG("ep0 driver '%s'\n", dev->driver->driver.name); + +- //if (!is_usb_connected()) +- // return; ++ if (!is_vbus_present()) ++ return; + + dump_udccs0 ("udccs0"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch new file mode 100644 index 0000000000..7bf4ad02d6 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch @@ -0,0 +1,225 @@ +From b9a0fdbf333b461682d5da8b9aaa42f4de91ffcf Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Sun, 10 Feb 2008 03:29:17 +0300 +Subject: [PATCH 18/64] Fix the pxa2xx_udc to balance calls to clk_enable/clk_disable + +Signed-off-by: Dmitry Baryshkov dbaryshkov@gmail.com +--- + drivers/usb/gadget/pxa2xx_udc.c | 84 +++++++++++++++++++++++---------------- + drivers/usb/gadget/pxa2xx_udc.h | 6 ++- + 2 files changed, 54 insertions(+), 36 deletions(-) + +diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c +index 2900556..8e32d07 100644 +--- a/drivers/usb/gadget/pxa2xx_udc.c ++++ b/drivers/usb/gadget/pxa2xx_udc.c +@@ -680,7 +680,7 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->stopped) { +- if (ep->desc == 0 /* ep0 */) { ++ if (ep->desc == NULL /* ep0 */) { + unsigned length = _req->length; + + switch (dev->ep0state) { +@@ -734,7 +734,7 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) + } + + /* pio or dma irq handler advances the queue. */ +- if (likely (req != 0)) ++ if (likely (req != NULL)) + list_add_tail(&req->queue, &ep->queue); + local_irq_restore(flags); + +@@ -934,20 +934,35 @@ static void udc_disable(struct pxa2xx_udc *); + /* We disable the UDC -- and its 48 MHz clock -- whenever it's not + * in active use. + */ +-static int pullup(struct pxa2xx_udc *udc, int is_active) ++static int pullup(struct pxa2xx_udc *udc) + { +- is_active = is_active && udc->vbus && udc->pullup; ++ int is_active = udc->vbus && udc->pullup && ! udc->suspended; + DMSG("%s\n", is_active ? "active" : "inactive"); +- if (is_active) +- udc_enable(udc); +- else { +- if (udc->gadget.speed != USB_SPEED_UNKNOWN) { +- DMSG("disconnect %s\n", udc->driver +- ? udc->driver->driver.name +- : "(no driver)"); +- stop_activity(udc, udc->driver); ++ if (is_active) { ++ if (!udc->active) { ++ udc->active = 1; ++#ifdef CONFIG_ARCH_PXA ++ /* Enable clock for USB device */ ++ clk_enable(udc->clk); ++#endif ++ udc_enable(udc); + } +- udc_disable(udc); ++ } else { ++ if (udc->active) { ++ if (udc->gadget.speed != USB_SPEED_UNKNOWN) { ++ DMSG("disconnect %s\n", udc->driver ++ ? udc->driver->driver.name ++ : "(no driver)"); ++ stop_activity(udc, udc->driver); ++ } ++ udc_disable(udc); ++#ifdef CONFIG_ARCH_PXA ++ /* Disable clock for USB device */ ++ clk_disable(udc->clk); ++#endif ++ udc->active = 0; ++ } ++ + } + return 0; + } +@@ -958,9 +973,9 @@ static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active) + struct pxa2xx_udc *udc; + + udc = container_of(_gadget, struct pxa2xx_udc, gadget); +- udc->vbus = is_active = (is_active != 0); ++ udc->vbus = (is_active != 0); + DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); +- pullup(udc, is_active); ++ pullup(udc); + return 0; + } + +@@ -975,9 +990,8 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) + return -EOPNOTSUPP; + +- is_active = (is_active != 0); +- udc->pullup = is_active; +- pullup(udc, is_active); ++ udc->pullup = (is_active != 0); ++ pullup(udc); + return 0; + } + +@@ -998,7 +1012,7 @@ static const struct usb_gadget_ops pxa2xx_udc_ops = { + + static struct pxa2xx_udc memory; + static int +-udc_seq_show(struct seq_file *m, void *d) ++udc_seq_show(struct seq_file *m, void *_d) + { + struct pxa2xx_udc *dev = m->private; + unsigned long flags; +@@ -1145,11 +1159,6 @@ static void udc_disable(struct pxa2xx_udc *dev) + + udc_clear_mask_UDCCR(UDCCR_UDE); + +-#ifdef CONFIG_ARCH_PXA +- /* Disable clock for USB device */ +- clk_disable(dev->clk); +-#endif +- + ep0_idle (dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; + } +@@ -1190,11 +1199,6 @@ static void udc_enable (struct pxa2xx_udc *dev) + { + udc_clear_mask_UDCCR(UDCCR_UDE); + +-#ifdef CONFIG_ARCH_PXA +- /* Enable clock for USB device */ +- clk_enable(dev->clk); +-#endif +- + /* try to clear these bits before we enable the udc */ + udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); + +@@ -1285,7 +1289,7 @@ fail: + * for set_configuration as well as eventual disconnect. + */ + DMSG("registered gadget driver '%s'\n", driver->driver.name); +- pullup(dev, 1); ++ pullup(dev); + dump_state(dev); + return 0; + } +@@ -1328,7 +1332,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) + return -EINVAL; + + local_irq_disable(); +- pullup(dev, 0); ++ dev->pullup = 0; ++ pullup(dev); + stop_activity(dev, driver); + local_irq_enable(); + +@@ -2267,7 +2272,9 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) + if (dev->driver) + return -EBUSY; + +- udc_disable(dev); ++ dev->pullup = 0; ++ pullup(dev); ++ + remove_debug_files(dev); + + if (dev->got_irq) { +@@ -2315,10 +2322,15 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) + static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) + { + struct pxa2xx_udc *udc = platform_get_drvdata(dev); ++ unsigned long flags; + + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) + WARN("USB host won't detect disconnect!\n"); +- pullup(udc, 0); ++ udc->suspended = 1; ++ ++ local_irq_save(flags); ++ pullup(udc); ++ local_irq_restore(flags); + + return 0; + } +@@ -2326,8 +2338,12 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) + static int pxa2xx_udc_resume(struct platform_device *dev) + { + struct pxa2xx_udc *udc = platform_get_drvdata(dev); ++ unsigned long flags; + +- pullup(udc, 1); ++ udc->suspended = 0; ++ local_irq_save(flags); ++ pullup(udc); ++ local_irq_restore(flags); + + return 0; + } +diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h +index c08b1a2..93586b2 100644 +--- a/drivers/usb/gadget/pxa2xx_udc.h ++++ b/drivers/usb/gadget/pxa2xx_udc.h +@@ -119,7 +119,9 @@ struct pxa2xx_udc { + has_cfr : 1, + req_pending : 1, + req_std : 1, +- req_config : 1; ++ req_config : 1, ++ suspended : 1, ++ active : 1; + + #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) + struct timer_list timer; +@@ -239,7 +241,7 @@ dump_state(struct pxa2xx_udc *dev) + dev->stats.read.bytes, dev->stats.read.ops); + + for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { +- if (dev->ep [i].desc == 0) ++ if (dev->ep [i].desc == NULL) + continue; + DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs); + } +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0019-pxa-remove-periodic-mode-emulation-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0019-pxa-remove-periodic-mode-emulation-support.patch new file mode 100644 index 0000000000..4b4107d655 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0019-pxa-remove-periodic-mode-emulation-support.patch @@ -0,0 +1,128 @@ +From bda65817167cce5294e1d84670f36815262ed550 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Sun, 3 Feb 2008 21:58:12 +0300 +Subject: [PATCH 19/64] pxa: remove periodic mode emulation support + +Apparantly, the generic time subsystem can accurately emulate periodic +mode via the one-shot support code, so we don't need our own periodic +emulation code anymore. Just ensure that we build support for one shot +into the generic time subsystem. + +Signed-off-by: Russell King +--- + arch/arm/Kconfig | 1 + + arch/arm/mach-pxa/time.c | 61 ++++++---------------------------------------- + 2 files changed, 9 insertions(+), 53 deletions(-) + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index a04f507..1be7182 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -345,6 +345,7 @@ config ARCH_PXA + select GENERIC_GPIO + select GENERIC_TIME + select GENERIC_CLOCKEVENTS ++ select TICK_ONESHOT + help + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. + +diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c +index fbfa192..3c4abbf 100644 +--- a/arch/arm/mach-pxa/time.c ++++ b/arch/arm/mach-pxa/time.c +@@ -59,55 +59,17 @@ unsigned long long sched_clock(void) + } + + ++#define MIN_OSCR_DELTA 16 ++ + static irqreturn_t + pxa_ost0_interrupt(int irq, void *dev_id) + { +- int next_match; + struct clock_event_device *c = dev_id; + +- if (c->mode == CLOCK_EVT_MODE_ONESHOT) { +- /* Disarm the compare/match, signal the event. */ +- OIER &= ~OIER_E0; +- OSSR = OSSR_M0; +- c->event_handler(c); +- } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) { +- /* Call the event handler as many times as necessary +- * to recover missed events, if any (if we update +- * OSMR0 and OSCR0 is still ahead of us, we've missed +- * the event). As we're dealing with that, re-arm the +- * compare/match for the next event. +- * +- * HACK ALERT: +- * +- * There's a latency between the instruction that +- * writes to OSMR0 and the actual commit to the +- * physical hardware, because the CPU doesn't (have +- * to) run at bus speed, there's a write buffer +- * between the CPU and the bus, etc. etc. So if the +- * target OSCR0 is "very close", to the OSMR0 load +- * value, the update to OSMR0 might not get to the +- * hardware in time and we'll miss that interrupt. +- * +- * To be safe, if the new OSMR0 is "very close" to the +- * target OSCR0 value, we call the event_handler as +- * though the event actually happened. According to +- * Nico's comment in the previous version of this +- * code, experience has shown that 6 OSCR ticks is +- * "very close" but he went with 8. We will use 16, +- * based on the results of testing on PXA270. +- * +- * To be doubly sure, we also tell clkevt via +- * clockevents_register_device() not to ask for +- * anything that might put us "very close". +- */ +-#define MIN_OSCR_DELTA 16 +- do { +- OSSR = OSSR_M0; +- next_match = (OSMR0 += LATCH); +- c->event_handler(c); +- } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA) +- && (c->mode == CLOCK_EVT_MODE_PERIODIC)); +- } ++ /* Disarm the compare/match, signal the event. */ ++ OIER &= ~OIER_E0; ++ OSSR = OSSR_M0; ++ c->event_handler(c); + + return IRQ_HANDLED; + } +@@ -133,14 +95,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) + unsigned long irqflags; + + switch (mode) { +- case CLOCK_EVT_MODE_PERIODIC: +- raw_local_irq_save(irqflags); +- OSSR = OSSR_M0; +- OIER |= OIER_E0; +- OSMR0 = OSCR + LATCH; +- raw_local_irq_restore(irqflags); +- break; +- + case CLOCK_EVT_MODE_ONESHOT: + raw_local_irq_save(irqflags); + OIER &= ~OIER_E0; +@@ -158,13 +112,14 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) + break; + + case CLOCK_EVT_MODE_RESUME: ++ case CLOCK_EVT_MODE_PERIODIC: + break; + } + } + + static struct clock_event_device ckevt_pxa_osmr0 = { + .name = "osmr0", +- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, ++ .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .cpumask = CPU_MASK_CPU0, +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0020-Provide-dew-device-clock-backports-from-2.6.24-git.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0020-Provide-dew-device-clock-backports-from-2.6.24-git.patch new file mode 100644 index 0000000000..0a42bc5855 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0020-Provide-dew-device-clock-backports-from-2.6.24-git.patch @@ -0,0 +1,257 @@ +From ee8ca5742e0000dd2369ef4d328c2c1117276a3b Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Mon, 4 Feb 2008 02:56:28 +0300 +Subject: [PATCH 20/64] Provide dew device/clock backports from 2.6.24-git + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/Kconfig | 1 + + arch/arm/mach-pxa/devices.h | 12 ++++++++++++ + arch/arm/mach-pxa/pxa25x.c | 18 ++++++++++++------ + arch/arm/mach-pxa/pxa27x.c | 22 ++++++++++++++++------ + arch/arm/mach-pxa/pxa3xx.c | 30 ++++++++++++++++++++++++++++++ + kernel/Makefile | 1 + + 6 files changed, 72 insertions(+), 12 deletions(-) + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 1be7182..10faf9c 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -367,6 +367,7 @@ config ARCH_SA1100 + select ARCH_DISCONTIGMEM_ENABLE + select ARCH_MTD_XIP + select GENERIC_GPIO ++ select GENERIC_TIME + help + Support for StrongARM 11x0 based boards. + +diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h +index 94c8d5c..96c7c89 100644 +--- a/arch/arm/mach-pxa/devices.h ++++ b/arch/arm/mach-pxa/devices.h +@@ -1,4 +1,6 @@ + extern struct platform_device pxa_device_mci; ++extern struct platform_device pxa3xx_device_mci2; ++extern struct platform_device pxa3xx_device_mci3; + extern struct platform_device pxa_device_udc; + extern struct platform_device pxa_device_fb; + extern struct platform_device pxa_device_ffuart; +@@ -12,3 +14,13 @@ extern struct platform_device pxa_device_rtc; + + extern struct platform_device pxa27x_device_i2c_power; + extern struct platform_device pxa27x_device_ohci; ++ ++extern struct platform_device pxa25x_device_ssp; ++extern struct platform_device pxa25x_device_nssp; ++extern struct platform_device pxa25x_device_assp; ++extern struct platform_device pxa27x_device_ssp1; ++extern struct platform_device pxa27x_device_ssp2; ++extern struct platform_device pxa27x_device_ssp3; ++extern struct platform_device pxa3xx_device_ssp4; ++ ++void __init pxa_register_device(struct platform_device *dev, void *data); +diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c +index 006a6e0..5988d99 100644 +--- a/arch/arm/mach-pxa/pxa25x.c ++++ b/arch/arm/mach-pxa/pxa25x.c +@@ -123,12 +123,15 @@ static struct clk pxa25x_clks[] = { + INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), + INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), + INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), ++ ++ INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev), ++ INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev), ++ INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev), ++ + /* + INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), + INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), +- INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL), + INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), +- INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL), + */ + INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), + }; +@@ -216,8 +219,6 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) + + static void pxa25x_cpu_pm_enter(suspend_state_t state) + { +- CKEN = 0; +- + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ +@@ -239,6 +240,8 @@ static void __init pxa25x_init_pm(void) + { + pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns; + } ++#else ++static inline void pxa25x_init_pm(void) {} + #endif + + /* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm +@@ -300,6 +303,9 @@ static struct platform_device *pxa25x_devices[] __initdata = { + &pxa_device_i2s, + &pxa_device_ficp, + &pxa_device_rtc, ++ &pxa25x_device_ssp, ++ &pxa25x_device_nssp, ++ &pxa25x_device_assp, + }; + + static int __init pxa25x_init(void) +@@ -315,9 +321,9 @@ static int __init pxa25x_init(void) + + if ((ret = pxa_init_dma(16))) + return ret; +-#ifdef CONFIG_PM ++ + pxa25x_init_pm(); +-#endif ++ + ret = platform_add_devices(pxa25x_devices, + ARRAY_SIZE(pxa25x_devices)); + } +diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c +index 8e126e6..30ca4fd 100644 +--- a/arch/arm/mach-pxa/pxa27x.c ++++ b/arch/arm/mach-pxa/pxa27x.c +@@ -150,11 +150,12 @@ static struct clk pxa27x_clks[] = { + INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), + INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), + ++ INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), ++ INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), ++ INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), ++ + /* + INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), +- INIT_CKEN("SSPCLK", SSP1, 13000000, 0, NULL), +- INIT_CKEN("SSPCLK", SSP2, 13000000, 0, NULL), +- INIT_CKEN("SSPCLK", SSP3, 13000000, 0, NULL), + INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), + INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), + INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), +@@ -304,6 +305,8 @@ static void __init pxa27x_init_pm(void) + { + pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns; + } ++#else ++static inline void pxa27x_init_pm(void) {} + #endif + + /* PXA27x: Various gpios can issue wakeup events. This logic only +@@ -423,6 +426,11 @@ struct platform_device pxa27x_device_i2c_power = { + .num_resources = ARRAY_SIZE(i2c_power_resources), + }; + ++void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info) ++{ ++ pxa27x_device_i2c_power.dev.platform_data = info; ++} ++ + static struct platform_device *devices[] __initdata = { + &pxa_device_mci, + &pxa_device_udc, +@@ -435,7 +443,9 @@ static struct platform_device *devices[] __initdata = { + &pxa_device_ficp, + &pxa_device_rtc, + &pxa27x_device_i2c_power, +- &pxa27x_device_ohci, ++ &pxa27x_device_ssp1, ++ &pxa27x_device_ssp2, ++ &pxa27x_device_ssp3, + }; + + static int __init pxa27x_init(void) +@@ -446,9 +456,9 @@ static int __init pxa27x_init(void) + + if ((ret = pxa_init_dma(32))) + return ret; +-#ifdef CONFIG_PM ++ + pxa27x_init_pm(); +-#endif ++ + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + } + return ret; +diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c +index 61d9c9d..ccab9da 100644 +--- a/arch/arm/mach-pxa/pxa3xx.c ++++ b/arch/arm/mach-pxa/pxa3xx.c +@@ -189,8 +189,31 @@ static struct clk pxa3xx_clks[] = { + + PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), + PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), ++ PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev), ++ ++ PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), ++ PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), ++ PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), ++ PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev), ++ ++ PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev), ++ PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev), ++ PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev), + }; + ++#ifdef CONFIG_PM ++#define SLEEP_SAVE_SIZE 4 ++ ++#define ISRAM_START 0x5c000000 ++#define ISRAM_SIZE SZ_256K ++ ++static inline void pxa3xx_init_pm(void) {} ++static inline void pxa3xx_init_irq_pm(void) {} ++#else ++static inline void pxa3xx_init_pm(void) {} ++static inline void pxa3xx_init_irq_pm(void) {} ++#endif ++ + void __init pxa3xx_init_irq(void) + { + /* enable CP6 access */ +@@ -202,6 +225,7 @@ void __init pxa3xx_init_irq(void) + pxa_init_irq_low(); + pxa_init_irq_high(); + pxa_init_irq_gpio(128); ++ pxa3xx_init_irq_pm(); + } + + /* +@@ -219,6 +243,10 @@ static struct platform_device *devices[] __initdata = { + &pxa_device_i2s, + &pxa_device_ficp, + &pxa_device_rtc, ++ &pxa27x_device_ssp1, ++ &pxa27x_device_ssp2, ++ &pxa27x_device_ssp3, ++ &pxa3xx_device_ssp4, + }; + + static int __init pxa3xx_init(void) +@@ -231,6 +259,8 @@ static int __init pxa3xx_init(void) + if ((ret = pxa_init_dma(32))) + return ret; + ++ pxa3xx_init_pm(); ++ + return platform_add_devices(devices, ARRAY_SIZE(devices)); + } + return 0; +diff --git a/kernel/Makefile b/kernel/Makefile +index dfa9695..6d9a87c 100644 +--- a/kernel/Makefile ++++ b/kernel/Makefile +@@ -57,6 +57,7 @@ obj-$(CONFIG_SYSCTL) += utsname_sysctl.o + obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o + obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o + obj-$(CONFIG_MARKERS) += marker.o ++obj-$(CONFIG_LATENCYTOP) += latencytop.o + + ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y) + # According to Alan Modra , the -fno-omit-frame-pointer is +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0021-Add-an-empty-drivers-gpio-directory-for-gpiolib-infr.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0021-Add-an-empty-drivers-gpio-directory-for-gpiolib-infr.patch new file mode 100644 index 0000000000..3f8512128a --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0021-Add-an-empty-drivers-gpio-directory-for-gpiolib-infr.patch @@ -0,0 +1,121 @@ +From b77665c545bc260d2b93add129413e4a724d7e6e Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Fri, 18 Jan 2008 00:35:00 +0300 +Subject: [PATCH 21/64] Add an empty drivers/gpio directory for gpiolib infrastructure and GPIO + expanders. It will be populated by later patches. + +This won't be the only place to hold such gpio_chip code. Many external chips +add a few GPIOs as secondary functionality (such as MFD drivers) and platform +code frequently needs to closely integrate GPIO and IRQ support. + +This is placed *early* in the build/link sequence since it's common for other +drivers to depend on GPIOs to do their work, so they must be initialized early +in the device_initcall() sequence. + +Signed-off-by: David Brownell +Acked-by: Jean Delvare +Cc: Eric Miao +Cc: Sam Ravnborg +Cc: Haavard Skinnemoen +Cc: Philipp Zabel +Cc: Russell King +Cc: Ben Gardner +Signed-off-by: Andrew Morton +--- + arch/arm/Kconfig | 2 ++ + drivers/Kconfig | 2 ++ + drivers/Makefile | 1 + + drivers/gpio/Kconfig | 32 ++++++++++++++++++++++++++++++++ + drivers/gpio/Makefile | 3 +++ + 5 files changed, 40 insertions(+), 0 deletions(-) + create mode 100644 drivers/gpio/Kconfig + create mode 100644 drivers/gpio/Makefile + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 10faf9c..06ca241 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1042,6 +1042,8 @@ source "drivers/i2c/Kconfig" + + source "drivers/spi/Kconfig" + ++source "drivers/gpio/Kconfig" ++ + source "drivers/w1/Kconfig" + + source "drivers/power/Kconfig" +diff --git a/drivers/Kconfig b/drivers/Kconfig +index f4076d9..90e295a 100644 +--- a/drivers/Kconfig ++++ b/drivers/Kconfig +@@ -52,6 +52,8 @@ source "drivers/i2c/Kconfig" + + source "drivers/spi/Kconfig" + ++source "drivers/gpio/Kconfig" ++ + source "drivers/w1/Kconfig" + + source "drivers/power/Kconfig" +diff --git a/drivers/Makefile b/drivers/Makefile +index 8cb37e3..8e5101f 100644 +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -5,6 +5,7 @@ + # Rewritten to use lists instead of if-statements. + # + ++obj-$(CONFIG_HAVE_GPIO_LIB) += gpio/ + obj-$(CONFIG_PCI) += pci/ + obj-$(CONFIG_PARISC) += parisc/ + obj-$(CONFIG_RAPIDIO) += rapidio/ +diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig +new file mode 100644 +index 0000000..560687c +--- /dev/null ++++ b/drivers/gpio/Kconfig +@@ -0,0 +1,32 @@ ++# ++# GPIO infrastructure and expanders ++# ++ ++config HAVE_GPIO_LIB ++ bool ++ help ++ Platforms select gpiolib if they use this infrastructure ++ for all their GPIOs, usually starting with ones integrated ++ into SOC processors. ++ ++menu "GPIO Support" ++ depends on HAVE_GPIO_LIB ++ ++config DEBUG_GPIO ++ bool "Debug GPIO calls" ++ depends on DEBUG_KERNEL ++ help ++ Say Y here to add some extra checks and diagnostics to GPIO calls. ++ The checks help ensure that GPIOs have been properly initialized ++ before they are used and that sleeping calls aren not made from ++ nonsleeping contexts. They can make bitbanged serial protocols ++ slower. The diagnostics help catch the type of setup errors ++ that are most common when setting up new platforms or boards. ++ ++# put expanders in the right section, in alphabetical order ++ ++comment "I2C GPIO expanders:" ++ ++comment "SPI GPIO expanders:" ++ ++endmenu +diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile +new file mode 100644 +index 0000000..cdbba6b +--- /dev/null ++++ b/drivers/gpio/Makefile +@@ -0,0 +1,3 @@ ++# gpio support: dedicated expander chips, etc ++ ++ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch new file mode 100644 index 0000000000..f39fedbbaa --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch @@ -0,0 +1,746 @@ +From 3a0251c01446f3a6763e4406ca5495102db63aa4 Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Fri, 18 Jan 2008 00:35:20 +0300 +Subject: [PATCH 22/64] Provide new implementation infrastructure that platforms may choose to use + when implementing the GPIO programming interface. Platforms can update their + GPIO support to use this. In many cases the incremental cost to access a + non-inlined GPIO should be less than a dozen instructions, with the memory + cost being about a page (total) of extra data and code. The upside is: + + * Providing two features which were "want to have (but OK to defer)" when + GPIO interfaces were first discussed in November 2006: + + - A "struct gpio_chip" to plug in GPIOs that aren't directly supported + by SOC platforms, but come from FPGAs or other multifunction devices + using conventional device registers (like UCB-1x00 or SM501 GPIOs, + and southbridges in PCs with more open specs than usual). + + - Full support for message-based GPIO expanders, where registers are + accessed through sleeping I/O calls. Previous support for these + "cansleep" calls was just stubs. (One example: the widely used + pcf8574 I2C chips, with 8 GPIOs each.) + + * Including a non-stub implementation of the gpio_{request,free}() calls, + making those calls much more useful. The diagnostic labels are also + recorded given DEBUG_FS, so /sys/kernel/debug/gpio can show a snapshot + of all GPIOs known to this infrastructure. + +The driver programming interfaces introduced in 2.6.21 do not change at all; +this infrastructure is entirely below those covers. + +Signed-off-by: David Brownell +Cc: Sam Ravnborg +Cc: Jean Delvare +Cc: Eric Miao +Cc: Haavard Skinnemoen +Cc: Philipp Zabel +Cc: Russell King +Cc: Ben Gardner +Signed-off-by: Andrew Morton +--- + drivers/gpio/Makefile | 2 + + drivers/gpio/gpiolib.c | 567 ++++++++++++++++++++++++++++++++++++++++++++ + include/asm-generic/gpio.h | 98 ++++++++ + 3 files changed, 667 insertions(+), 0 deletions(-) + create mode 100644 drivers/gpio/gpiolib.c + +diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile +index cdbba6b..2db28ce 100644 +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -1,3 +1,5 @@ + # gpio support: dedicated expander chips, etc + + ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG ++ ++obj-$(CONFIG_HAVE_GPIO_LIB) += gpiolib.o +diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c +new file mode 100644 +index 0000000..d8db2f8 +--- /dev/null ++++ b/drivers/gpio/gpiolib.c +@@ -0,0 +1,567 @@ ++#include ++#include ++#include ++#include ++ ++#include ++ ++ ++/* Optional implementation infrastructure for GPIO interfaces. ++ * ++ * Platforms may want to use this if they tend to use very many GPIOs ++ * that aren't part of a System-On-Chip core; or across I2C/SPI/etc. ++ * ++ * When kernel footprint or instruction count is an issue, simpler ++ * implementations may be preferred. The GPIO programming interface ++ * allows for inlining speed-critical get/set operations for common ++ * cases, so that access to SOC-integrated GPIOs can sometimes cost ++ * only an instruction or two per bit. ++ */ ++ ++ ++/* When debugging, extend minimal trust to callers and platform code. ++ * Also emit diagnostic messages that may help initial bringup, when ++ * board setup or driver bugs are most common. ++ * ++ * Otherwise, minimize overhead in what may be bitbanging codepaths. ++ */ ++#ifdef DEBUG ++#define extra_checks 1 ++#else ++#define extra_checks 0 ++#endif ++ ++/* gpio_lock prevents conflicts during gpio_desc[] table updates. ++ * While any GPIO is requested, its gpio_chip is not removable; ++ * each GPIO's "requested" flag serves as a lock and refcount. ++ */ ++static DEFINE_SPINLOCK(gpio_lock); ++ ++struct gpio_desc { ++ struct gpio_chip *chip; ++ unsigned long flags; ++/* flag symbols are bit numbers */ ++#define FLAG_REQUESTED 0 ++#define FLAG_IS_OUT 1 ++ ++#ifdef CONFIG_DEBUG_FS ++ const char *label; ++#endif ++}; ++static struct gpio_desc gpio_desc[ARCH_NR_GPIOS]; ++ ++static inline void desc_set_label(struct gpio_desc *d, const char *label) ++{ ++#ifdef CONFIG_DEBUG_FS ++ d->label = label; ++#endif ++} ++ ++/* Warn when drivers omit gpio_request() calls -- legal but ill-advised ++ * when setting direction, and otherwise illegal. Until board setup code ++ * and drivers use explicit requests everywhere (which won't happen when ++ * those calls have no teeth) we can't avoid autorequesting. This nag ++ * message should motivate switching to explicit requests... ++ */ ++static void gpio_ensure_requested(struct gpio_desc *desc) ++{ ++ if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) { ++ pr_warning("GPIO-%d autorequested\n", (int)(desc - gpio_desc)); ++ desc_set_label(desc, "[auto]"); ++ } ++} ++ ++/* caller holds gpio_lock *OR* gpio is marked as requested */ ++static inline struct gpio_chip *gpio_to_chip(unsigned gpio) ++{ ++ return gpio_desc[gpio].chip; ++} ++ ++/** ++ * gpiochip_add() - register a gpio_chip ++ * @chip: the chip to register, with chip->base initialized ++ * Context: potentially before irqs or kmalloc will work ++ * ++ * Returns a negative errno if the chip can't be registered, such as ++ * because the chip->base is invalid or already associated with a ++ * different chip. Otherwise it returns zero as a success code. ++ */ ++int gpiochip_add(struct gpio_chip *chip) ++{ ++ unsigned long flags; ++ int status = 0; ++ unsigned id; ++ ++ /* NOTE chip->base negative is reserved to mean a request for ++ * dynamic allocation. We don't currently support that. ++ */ ++ ++ if (chip->base < 0 || (chip->base + chip->ngpio) >= ARCH_NR_GPIOS) { ++ status = -EINVAL; ++ goto fail; ++ } ++ ++ spin_lock_irqsave(&gpio_lock, flags); ++ ++ /* these GPIO numbers must not be managed by another gpio_chip */ ++ for (id = chip->base; id < chip->base + chip->ngpio; id++) { ++ if (gpio_desc[id].chip != NULL) { ++ status = -EBUSY; ++ break; ++ } ++ } ++ if (status == 0) { ++ for (id = chip->base; id < chip->base + chip->ngpio; id++) { ++ gpio_desc[id].chip = chip; ++ gpio_desc[id].flags = 0; ++ } ++ } ++ ++ spin_unlock_irqrestore(&gpio_lock, flags); ++fail: ++ /* failures here can mean systems won't boot... */ ++ if (status) ++ pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n", ++ chip->base, chip->base + chip->ngpio, ++ chip->label ? : "generic"); ++ return status; ++} ++EXPORT_SYMBOL_GPL(gpiochip_add); ++ ++/** ++ * gpiochip_remove() - unregister a gpio_chip ++ * @chip: the chip to unregister ++ * ++ * A gpio_chip with any GPIOs still requested may not be removed. ++ */ ++int gpiochip_remove(struct gpio_chip *chip) ++{ ++ unsigned long flags; ++ int status = 0; ++ unsigned id; ++ ++ spin_lock_irqsave(&gpio_lock, flags); ++ ++ for (id = chip->base; id < chip->base + chip->ngpio; id++) { ++ if (test_bit(FLAG_REQUESTED, &gpio_desc[id].flags)) { ++ status = -EBUSY; ++ break; ++ } ++ } ++ if (status == 0) { ++ for (id = chip->base; id < chip->base + chip->ngpio; id++) ++ gpio_desc[id].chip = NULL; ++ } ++ ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ return status; ++} ++EXPORT_SYMBOL_GPL(gpiochip_remove); ++ ++ ++/* These "optional" allocation calls help prevent drivers from stomping ++ * on each other, and help provide better diagnostics in debugfs. ++ * They're called even less than the "set direction" calls. ++ */ ++int gpio_request(unsigned gpio, const char *label) ++{ ++ struct gpio_desc *desc; ++ int status = -EINVAL; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&gpio_lock, flags); ++ ++ if (gpio >= ARCH_NR_GPIOS) ++ goto done; ++ desc = &gpio_desc[gpio]; ++ if (desc->chip == NULL) ++ goto done; ++ ++ /* NOTE: gpio_request() can be called in early boot, ++ * before IRQs are enabled. ++ */ ++ ++ if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) { ++ desc_set_label(desc, label ? : "?"); ++ status = 0; ++ } else ++ status = -EBUSY; ++ ++done: ++ if (status) ++ pr_debug("gpio_request: gpio-%d (%s) status %d\n", ++ gpio, label ? : "?", status); ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ return status; ++} ++EXPORT_SYMBOL_GPL(gpio_request); ++ ++void gpio_free(unsigned gpio) ++{ ++ unsigned long flags; ++ struct gpio_desc *desc; ++ ++ if (gpio >= ARCH_NR_GPIOS) { ++ WARN_ON(extra_checks); ++ return; ++ } ++ ++ spin_lock_irqsave(&gpio_lock, flags); ++ ++ desc = &gpio_desc[gpio]; ++ if (desc->chip && test_and_clear_bit(FLAG_REQUESTED, &desc->flags)) ++ desc_set_label(desc, NULL); ++ else ++ WARN_ON(extra_checks); ++ ++ spin_unlock_irqrestore(&gpio_lock, flags); ++} ++EXPORT_SYMBOL_GPL(gpio_free); ++ ++ ++/** ++ * gpiochip_is_requested - return string iff signal was requested ++ * @chip: controller managing the signal ++ * @offset: of signal within controller's 0..(ngpio - 1) range ++ * ++ * Returns NULL if the GPIO is not currently requested, else a string. ++ * If debugfs support is enabled, the string returned is the label passed ++ * to gpio_request(); otherwise it is a meaningless constant. ++ * ++ * This function is for use by GPIO controller drivers. The label can ++ * help with diagnostics, and knowing that the signal is used as a GPIO ++ * can help avoid accidentally multiplexing it to another controller. ++ */ ++const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset) ++{ ++ unsigned gpio = chip->base + offset; ++ ++ if (gpio >= ARCH_NR_GPIOS || gpio_desc[gpio].chip != chip) ++ return NULL; ++ if (test_bit(FLAG_REQUESTED, &gpio_desc[gpio].flags) == 0) ++ return NULL; ++#ifdef CONFIG_DEBUG_FS ++ return gpio_desc[gpio].label; ++#else ++ return "?"; ++#endif ++} ++EXPORT_SYMBOL_GPL(gpiochip_is_requested); ++ ++ ++/* Drivers MUST set GPIO direction before making get/set calls. In ++ * some cases this is done in early boot, before IRQs are enabled. ++ * ++ * As a rule these aren't called more than once (except for drivers ++ * using the open-drain emulation idiom) so these are natural places ++ * to accumulate extra debugging checks. Note that we can't (yet) ++ * rely on gpio_request() having been called beforehand. ++ */ ++ ++int gpio_direction_input(unsigned gpio) ++{ ++ unsigned long flags; ++ struct gpio_chip *chip; ++ struct gpio_desc *desc = &gpio_desc[gpio]; ++ int status = -EINVAL; ++ ++ spin_lock_irqsave(&gpio_lock, flags); ++ ++ if (gpio >= ARCH_NR_GPIOS) ++ goto fail; ++ chip = desc->chip; ++ if (!chip || !chip->get || !chip->direction_input) ++ goto fail; ++ gpio -= chip->base; ++ if (gpio >= chip->ngpio) ++ goto fail; ++ gpio_ensure_requested(desc); ++ ++ /* now we know the gpio is valid and chip won't vanish */ ++ ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ ++ might_sleep_if(extra_checks && chip->can_sleep); ++ ++ status = chip->direction_input(chip, gpio); ++ if (status == 0) ++ clear_bit(FLAG_IS_OUT, &desc->flags); ++ return status; ++fail: ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ if (status) ++ pr_debug("%s: gpio-%d status %d\n", ++ __FUNCTION__, gpio, status); ++ return status; ++} ++EXPORT_SYMBOL_GPL(gpio_direction_input); ++ ++int gpio_direction_output(unsigned gpio, int value) ++{ ++ unsigned long flags; ++ struct gpio_chip *chip; ++ struct gpio_desc *desc = &gpio_desc[gpio]; ++ int status = -EINVAL; ++ ++ spin_lock_irqsave(&gpio_lock, flags); ++ ++ if (gpio >= ARCH_NR_GPIOS) ++ goto fail; ++ chip = desc->chip; ++ if (!chip || !chip->set || !chip->direction_output) ++ goto fail; ++ gpio -= chip->base; ++ if (gpio >= chip->ngpio) ++ goto fail; ++ gpio_ensure_requested(desc); ++ ++ /* now we know the gpio is valid and chip won't vanish */ ++ ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ ++ might_sleep_if(extra_checks && chip->can_sleep); ++ ++ status = chip->direction_output(chip, gpio, value); ++ if (status == 0) ++ set_bit(FLAG_IS_OUT, &desc->flags); ++ return status; ++fail: ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ if (status) ++ pr_debug("%s: gpio-%d status %d\n", ++ __FUNCTION__, gpio, status); ++ return status; ++} ++EXPORT_SYMBOL_GPL(gpio_direction_output); ++ ++ ++/* I/O calls are only valid after configuration completed; the relevant ++ * "is this a valid GPIO" error checks should already have been done. ++ * ++ * "Get" operations are often inlinable as reading a pin value register, ++ * and masking the relevant bit in that register. ++ * ++ * When "set" operations are inlinable, they involve writing that mask to ++ * one register to set a low value, or a different register to set it high. ++ * Otherwise locking is needed, so there may be little value to inlining. ++ * ++ *------------------------------------------------------------------------ ++ * ++ * IMPORTANT!!! The hot paths -- get/set value -- assume that callers ++ * have requested the GPIO. That can include implicit requesting by ++ * a direction setting call. Marking a gpio as requested locks its chip ++ * in memory, guaranteeing that these table lookups need no more locking ++ * and that gpiochip_remove() will fail. ++ * ++ * REVISIT when debugging, consider adding some instrumentation to ensure ++ * that the GPIO was actually requested. ++ */ ++ ++/** ++ * __gpio_get_value() - return a gpio's value ++ * @gpio: gpio whose value will be returned ++ * Context: any ++ * ++ * This is used directly or indirectly to implement gpio_get_value(). ++ * It returns the zero or nonzero value provided by the associated ++ * gpio_chip.get() method; or zero if no such method is provided. ++ */ ++int __gpio_get_value(unsigned gpio) ++{ ++ struct gpio_chip *chip; ++ ++ chip = gpio_to_chip(gpio); ++ WARN_ON(extra_checks && chip->can_sleep); ++ return chip->get ? chip->get(chip, gpio - chip->base) : 0; ++} ++EXPORT_SYMBOL_GPL(__gpio_get_value); ++ ++/** ++ * __gpio_set_value() - assign a gpio's value ++ * @gpio: gpio whose value will be assigned ++ * @value: value to assign ++ * Context: any ++ * ++ * This is used directly or indirectly to implement gpio_set_value(). ++ * It invokes the associated gpio_chip.set() method. ++ */ ++void __gpio_set_value(unsigned gpio, int value) ++{ ++ struct gpio_chip *chip; ++ ++ chip = gpio_to_chip(gpio); ++ WARN_ON(extra_checks && chip->can_sleep); ++ chip->set(chip, gpio - chip->base, value); ++} ++EXPORT_SYMBOL_GPL(__gpio_set_value); ++ ++/** ++ * __gpio_cansleep() - report whether gpio value access will sleep ++ * @gpio: gpio in question ++ * Context: any ++ * ++ * This is used directly or indirectly to implement gpio_cansleep(). It ++ * returns nonzero if access reading or writing the GPIO value can sleep. ++ */ ++int __gpio_cansleep(unsigned gpio) ++{ ++ struct gpio_chip *chip; ++ ++ /* only call this on GPIOs that are valid! */ ++ chip = gpio_to_chip(gpio); ++ ++ return chip->can_sleep; ++} ++EXPORT_SYMBOL_GPL(__gpio_cansleep); ++ ++ ++ ++/* There's no value in making it easy to inline GPIO calls that may sleep. ++ * Common examples include ones connected to I2C or SPI chips. ++ */ ++ ++int gpio_get_value_cansleep(unsigned gpio) ++{ ++ struct gpio_chip *chip; ++ ++ might_sleep_if(extra_checks); ++ chip = gpio_to_chip(gpio); ++ return chip->get(chip, gpio - chip->base); ++} ++EXPORT_SYMBOL_GPL(gpio_get_value_cansleep); ++ ++void gpio_set_value_cansleep(unsigned gpio, int value) ++{ ++ struct gpio_chip *chip; ++ ++ might_sleep_if(extra_checks); ++ chip = gpio_to_chip(gpio); ++ chip->set(chip, gpio - chip->base, value); ++} ++EXPORT_SYMBOL_GPL(gpio_set_value_cansleep); ++ ++ ++#ifdef CONFIG_DEBUG_FS ++ ++#include ++#include ++ ++ ++static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) ++{ ++ unsigned i; ++ unsigned gpio = chip->base; ++ struct gpio_desc *gdesc = &gpio_desc[gpio]; ++ int is_out; ++ ++ for (i = 0; i < chip->ngpio; i++, gpio++, gdesc++) { ++ if (!test_bit(FLAG_REQUESTED, &gdesc->flags)) ++ continue; ++ ++ is_out = test_bit(FLAG_IS_OUT, &gdesc->flags); ++ seq_printf(s, " gpio-%-3d (%-12s) %s %s", ++ gpio, gdesc->label, ++ is_out ? "out" : "in ", ++ chip->get ++ ? (chip->get(chip, i) ? "hi" : "lo") ++ : "? "); ++ ++ if (!is_out) { ++ int irq = gpio_to_irq(gpio); ++ struct irq_desc *desc = irq_desc + irq; ++ ++ /* This races with request_irq(), set_irq_type(), ++ * and set_irq_wake() ... but those are "rare". ++ * ++ * More significantly, trigger type flags aren't ++ * currently maintained by genirq. ++ */ ++ if (irq >= 0 && desc->action) { ++ char *trigger; ++ ++ switch (desc->status & IRQ_TYPE_SENSE_MASK) { ++ case IRQ_TYPE_NONE: ++ trigger = "(default)"; ++ break; ++ case IRQ_TYPE_EDGE_FALLING: ++ trigger = "edge-falling"; ++ break; ++ case IRQ_TYPE_EDGE_RISING: ++ trigger = "edge-rising"; ++ break; ++ case IRQ_TYPE_EDGE_BOTH: ++ trigger = "edge-both"; ++ break; ++ case IRQ_TYPE_LEVEL_HIGH: ++ trigger = "level-high"; ++ break; ++ case IRQ_TYPE_LEVEL_LOW: ++ trigger = "level-low"; ++ break; ++ default: ++ trigger = "?trigger?"; ++ break; ++ } ++ ++ seq_printf(s, " irq-%d %s%s", ++ irq, trigger, ++ (desc->status & IRQ_WAKEUP) ++ ? " wakeup" : ""); ++ } ++ } ++ ++ seq_printf(s, "\n"); ++ } ++} ++ ++static int gpiolib_show(struct seq_file *s, void *unused) ++{ ++ struct gpio_chip *chip = NULL; ++ unsigned gpio; ++ int started = 0; ++ ++ /* REVISIT this isn't locked against gpio_chip removal ... */ ++ ++ for (gpio = 0; gpio < ARCH_NR_GPIOS; gpio++) { ++ if (chip == gpio_desc[gpio].chip) ++ continue; ++ chip = gpio_desc[gpio].chip; ++ if (!chip) ++ continue; ++ ++ seq_printf(s, "%sGPIOs %d-%d, %s%s:\n", ++ started ? "\n" : "", ++ chip->base, chip->base + chip->ngpio - 1, ++ chip->label ? : "generic", ++ chip->can_sleep ? ", can sleep" : ""); ++ started = 1; ++ if (chip->dbg_show) ++ chip->dbg_show(s, chip); ++ else ++ gpiolib_dbg_show(s, chip); ++ } ++ return 0; ++} ++ ++static int gpiolib_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, gpiolib_show, NULL); ++} ++ ++static struct file_operations gpiolib_operations = { ++ .open = gpiolib_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static int __init gpiolib_debugfs_init(void) ++{ ++ /* /sys/kernel/debug/gpio */ ++ (void) debugfs_create_file("gpio", S_IFREG | S_IRUGO, ++ NULL, NULL, &gpiolib_operations); ++ return 0; ++} ++subsys_initcall(gpiolib_debugfs_init); ++ ++#endif /* DEBUG_FS */ +diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h +index 2d0aab1..f29a502 100644 +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -1,6 +1,102 @@ + #ifndef _ASM_GENERIC_GPIO_H + #define _ASM_GENERIC_GPIO_H + ++#ifdef CONFIG_HAVE_GPIO_LIB ++ ++/* Platforms may implement their GPIO interface with library code, ++ * at a small performance cost for non-inlined operations and some ++ * extra memory (for code and for per-GPIO table entries). ++ * ++ * While the GPIO programming interface defines valid GPIO numbers ++ * to be in the range 0..MAX_INT, this library restricts them to the ++ * smaller range 0..ARCH_NR_GPIOS. ++ */ ++ ++#ifndef ARCH_NR_GPIOS ++#define ARCH_NR_GPIOS 256 ++#endif ++ ++struct seq_file; ++ ++/** ++ * struct gpio_chip - abstract a GPIO controller ++ * @label: for diagnostics ++ * @direction_input: configures signal "offset" as input, or returns error ++ * @get: returns value for signal "offset"; for output signals this ++ * returns either the value actually sensed, or zero ++ * @direction_output: configures signal "offset" as output, or returns error ++ * @set: assigns output value for signal "offset" ++ * @dbg_show: optional routine to show contents in debugfs; default code ++ * will be used when this is omitted, but custom code can show extra ++ * state (such as pullup/pulldown configuration). ++ * @base: identifies the first GPIO number handled by this chip; or, if ++ * negative during registration, requests dynamic ID allocation. ++ * @ngpio: the number of GPIOs handled by this controller; the last GPIO ++ * handled is (base + ngpio - 1). ++ * @can_sleep: flag must be set iff get()/set() methods sleep, as they ++ * must while accessing GPIO expander chips over I2C or SPI ++ * ++ * A gpio_chip can help platforms abstract various sources of GPIOs so ++ * they can all be accessed through a common programing interface. ++ * Example sources would be SOC controllers, FPGAs, multifunction ++ * chips, dedicated GPIO expanders, and so on. ++ * ++ * Each chip controls a number of signals, identified in method calls ++ * by "offset" values in the range 0..(@ngpio - 1). When those signals ++ * are referenced through calls like gpio_get_value(gpio), the offset ++ * is calculated by subtracting @base from the gpio number. ++ */ ++struct gpio_chip { ++ char *label; ++ ++ int (*direction_input)(struct gpio_chip *chip, ++ unsigned offset); ++ int (*get)(struct gpio_chip *chip, ++ unsigned offset); ++ int (*direction_output)(struct gpio_chip *chip, ++ unsigned offset, int value); ++ void (*set)(struct gpio_chip *chip, ++ unsigned offset, int value); ++ void (*dbg_show)(struct seq_file *s, ++ struct gpio_chip *chip); ++ int base; ++ u16 ngpio; ++ unsigned can_sleep:1; ++}; ++ ++extern const char *gpiochip_is_requested(struct gpio_chip *chip, ++ unsigned offset); ++ ++/* add/remove chips */ ++extern int gpiochip_add(struct gpio_chip *chip); ++extern int __must_check gpiochip_remove(struct gpio_chip *chip); ++ ++ ++/* Always use the library code for GPIO management calls, ++ * or when sleeping may be involved. ++ */ ++extern int gpio_request(unsigned gpio, const char *label); ++extern void gpio_free(unsigned gpio); ++ ++extern int gpio_direction_input(unsigned gpio); ++extern int gpio_direction_output(unsigned gpio, int value); ++ ++extern int gpio_get_value_cansleep(unsigned gpio); ++extern void gpio_set_value_cansleep(unsigned gpio, int value); ++ ++ ++/* A platform's code may want to inline the I/O calls when ++ * the GPIO is constant and refers to some always-present controller, ++ * giving direct access to chip registers and tight bitbanging loops. ++ */ ++extern int __gpio_get_value(unsigned gpio); ++extern void __gpio_set_value(unsigned gpio, int value); ++ ++extern int __gpio_cansleep(unsigned gpio); ++ ++ ++#else ++ + /* platforms that don't directly support access to GPIOs through I2C, SPI, + * or other blocking infrastructure can use these wrappers. + */ +@@ -22,4 +118,6 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value) + gpio_set_value(gpio, value); + } + ++#endif ++ + #endif /* _ASM_GENERIC_GPIO_H */ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0023-This-adds-gpiolib-support-for-the-PXA-architecture.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0023-This-adds-gpiolib-support-for-the-PXA-architecture.patch new file mode 100644 index 0000000000..7a37be85cf --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0023-This-adds-gpiolib-support-for-the-PXA-architecture.patch @@ -0,0 +1,498 @@ +From 49da9bd487e54164a75503e0037a054cce697ed5 Mon Sep 17 00:00:00 2001 +From: Philipp Zabel +Date: Tue, 12 Feb 2008 04:38:12 +0300 +Subject: [PATCH 23/64] This adds gpiolib support for the PXA architecture: + - move all GPIO API functions from generic.c into gpio.c + - convert the gpio_get/set_value macros into inline functions + +This makes it easier to hook up GPIOs provided by external chips like +ASICs and CPLDs. + +Signed-off-by: Philipp Zabel +Signed-off-by: David Brownell +Acked-by: Russell King +Cc: Jean Delvare +Cc: Eric Miao +Cc: Sam Ravnborg +Cc: Haavard Skinnemoen +Cc: Ben Gardner +Signed-off-by: Andrew Morton +--- + arch/arm/Kconfig | 1 + + arch/arm/mach-pxa/Makefile | 3 +- + arch/arm/mach-pxa/generic.c | 93 ---------------- + arch/arm/mach-pxa/generic.h | 1 + + arch/arm/mach-pxa/gpio.c | 197 +++++++++++++++++++++++++++++++++++ + arch/arm/mach-pxa/irq.c | 2 + + include/asm-arm/arch-pxa/gpio.h | 48 ++++----- + include/asm-arm/arch-pxa/pxa-regs.h | 13 +++ + 8 files changed, 236 insertions(+), 122 deletions(-) + create mode 100644 arch/arm/mach-pxa/gpio.c + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 06ca241..423e953 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -346,6 +346,7 @@ config ARCH_PXA + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT ++ select HAVE_GPIO_LIB + help + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. + +diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile +index 4263527..5cb0216 100644 +--- a/arch/arm/mach-pxa/Makefile ++++ b/arch/arm/mach-pxa/Makefile +@@ -3,7 +3,8 @@ + # + + # Common support (must be linked before board specific support) +-obj-y += clock.o generic.o irq.o dma.o time.o ++obj-y += clock.o generic.o irq.o dma.o \ ++ time.o gpio.o + obj-$(CONFIG_PXA25x) += pxa25x.o + obj-$(CONFIG_PXA27x) += pxa27x.o + obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o +diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c +index 1c34946..6c07292 100644 +--- a/arch/arm/mach-pxa/generic.c ++++ b/arch/arm/mach-pxa/generic.c +@@ -32,7 +32,6 @@ + #include + + #include +-#include + #include + #include + #include +@@ -73,97 +72,6 @@ unsigned int get_memclk_frequency_10khz(void) + EXPORT_SYMBOL(get_memclk_frequency_10khz); + + /* +- * Handy function to set GPIO alternate functions +- */ +-int pxa_last_gpio; +- +-int pxa_gpio_mode(int gpio_mode) +-{ +- unsigned long flags; +- int gpio = gpio_mode & GPIO_MD_MASK_NR; +- int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; +- int gafr; +- +- if (gpio > pxa_last_gpio) +- return -EINVAL; +- +- local_irq_save(flags); +- if (gpio_mode & GPIO_DFLT_LOW) +- GPCR(gpio) = GPIO_bit(gpio); +- else if (gpio_mode & GPIO_DFLT_HIGH) +- GPSR(gpio) = GPIO_bit(gpio); +- if (gpio_mode & GPIO_MD_MASK_DIR) +- GPDR(gpio) |= GPIO_bit(gpio); +- else +- GPDR(gpio) &= ~GPIO_bit(gpio); +- gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); +- GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); +- local_irq_restore(flags); +- +- return 0; +-} +- +-EXPORT_SYMBOL(pxa_gpio_mode); +- +-int gpio_direction_input(unsigned gpio) +-{ +- unsigned long flags; +- u32 mask; +- +- if (gpio > pxa_last_gpio) +- return -EINVAL; +- +- mask = GPIO_bit(gpio); +- local_irq_save(flags); +- GPDR(gpio) &= ~mask; +- local_irq_restore(flags); +- +- return 0; +-} +-EXPORT_SYMBOL(gpio_direction_input); +- +-int gpio_direction_output(unsigned gpio, int value) +-{ +- unsigned long flags; +- u32 mask; +- +- if (gpio > pxa_last_gpio) +- return -EINVAL; +- +- mask = GPIO_bit(gpio); +- local_irq_save(flags); +- if (value) +- GPSR(gpio) = mask; +- else +- GPCR(gpio) = mask; +- GPDR(gpio) |= mask; +- local_irq_restore(flags); +- +- return 0; +-} +-EXPORT_SYMBOL(gpio_direction_output); +- +-/* +- * Return GPIO level +- */ +-int pxa_gpio_get_value(unsigned gpio) +-{ +- return __gpio_get_value(gpio); +-} +- +-EXPORT_SYMBOL(pxa_gpio_get_value); +- +-/* +- * Set output GPIO level +- */ +-void pxa_gpio_set_value(unsigned gpio, int value) +-{ +- __gpio_set_value(gpio, value); +-} +- +-EXPORT_SYMBOL(pxa_gpio_set_value); +- +-/* + * Routine to safely enable or disable a clock in the CKEN + */ + void __pxa_set_cken(int clock, int enable) +@@ -178,7 +86,6 @@ void __pxa_set_cken(int clock, int enable) + + local_irq_restore(flags); + } +- + EXPORT_SYMBOL(__pxa_set_cken); + + /* +diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h +index b30f240..727a9f5 100644 +--- a/arch/arm/mach-pxa/generic.h ++++ b/arch/arm/mach-pxa/generic.h +@@ -16,6 +16,7 @@ extern void __init pxa_init_irq_low(void); + extern void __init pxa_init_irq_high(void); + extern void __init pxa_init_irq_gpio(int gpio_nr); + extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)); ++extern void __init pxa_init_gpio(int gpio_nr); + extern void __init pxa25x_init_irq(void); + extern void __init pxa27x_init_irq(void); + extern void __init pxa3xx_init_irq(void); +diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c +new file mode 100644 +index 0000000..8638dd7 +--- /dev/null ++++ b/arch/arm/mach-pxa/gpio.c +@@ -0,0 +1,197 @@ ++/* ++ * linux/arch/arm/mach-pxa/gpio.c ++ * ++ * Generic PXA GPIO handling ++ * ++ * Author: Nicolas Pitre ++ * Created: Jun 15, 2001 ++ * Copyright: MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "generic.h" ++ ++ ++struct pxa_gpio_chip { ++ struct gpio_chip chip; ++ void __iomem *regbase; ++}; ++ ++int pxa_last_gpio; ++ ++/* ++ * Configure pins for GPIO or other functions ++ */ ++int pxa_gpio_mode(int gpio_mode) ++{ ++ unsigned long flags; ++ int gpio = gpio_mode & GPIO_MD_MASK_NR; ++ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; ++ int gafr; ++ ++ if (gpio > pxa_last_gpio) ++ return -EINVAL; ++ ++ local_irq_save(flags); ++ if (gpio_mode & GPIO_DFLT_LOW) ++ GPCR(gpio) = GPIO_bit(gpio); ++ else if (gpio_mode & GPIO_DFLT_HIGH) ++ GPSR(gpio) = GPIO_bit(gpio); ++ if (gpio_mode & GPIO_MD_MASK_DIR) ++ GPDR(gpio) |= GPIO_bit(gpio); ++ else ++ GPDR(gpio) &= ~GPIO_bit(gpio); ++ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); ++ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++EXPORT_SYMBOL(pxa_gpio_mode); ++ ++static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) ++{ ++ unsigned long flags; ++ u32 mask = 1 << offset; ++ u32 value; ++ struct pxa_gpio_chip *pxa; ++ void __iomem *gpdr; ++ ++ pxa = container_of(chip, struct pxa_gpio_chip, chip); ++ gpdr = pxa->regbase + GPDR_OFFSET; ++ local_irq_save(flags); ++ value = __raw_readl(gpdr); ++ value &= ~mask; ++ __raw_writel(value, gpdr); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++static int pxa_gpio_direction_output(struct gpio_chip *chip, ++ unsigned offset, int value) ++{ ++ unsigned long flags; ++ u32 mask = 1 << offset; ++ u32 tmp; ++ struct pxa_gpio_chip *pxa; ++ void __iomem *gpdr; ++ ++ pxa = container_of(chip, struct pxa_gpio_chip, chip); ++ __raw_writel(mask, ++ pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET)); ++ gpdr = pxa->regbase + GPDR_OFFSET; ++ local_irq_save(flags); ++ tmp = __raw_readl(gpdr); ++ tmp |= mask; ++ __raw_writel(tmp, gpdr); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++/* ++ * Return GPIO level ++ */ ++static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset) ++{ ++ u32 mask = 1 << offset; ++ struct pxa_gpio_chip *pxa; ++ ++ pxa = container_of(chip, struct pxa_gpio_chip, chip); ++ return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask; ++} ++ ++/* ++ * Set output GPIO level ++ */ ++static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) ++{ ++ u32 mask = 1 << offset; ++ struct pxa_gpio_chip *pxa; ++ ++ pxa = container_of(chip, struct pxa_gpio_chip, chip); ++ ++ if (value) ++ __raw_writel(mask, pxa->regbase + GPSR_OFFSET); ++ else ++ __raw_writel(mask, pxa->regbase + GPCR_OFFSET); ++} ++ ++static struct pxa_gpio_chip pxa_gpio_chip[] = { ++ [0] = { ++ .regbase = GPIO0_BASE, ++ .chip = { ++ .label = "gpio-0", ++ .direction_input = pxa_gpio_direction_input, ++ .direction_output = pxa_gpio_direction_output, ++ .get = pxa_gpio_get, ++ .set = pxa_gpio_set, ++ .base = 0, ++ .ngpio = 32, ++ }, ++ }, ++ [1] = { ++ .regbase = GPIO1_BASE, ++ .chip = { ++ .label = "gpio-1", ++ .direction_input = pxa_gpio_direction_input, ++ .direction_output = pxa_gpio_direction_output, ++ .get = pxa_gpio_get, ++ .set = pxa_gpio_set, ++ .base = 32, ++ .ngpio = 32, ++ }, ++ }, ++ [2] = { ++ .regbase = GPIO2_BASE, ++ .chip = { ++ .label = "gpio-2", ++ .direction_input = pxa_gpio_direction_input, ++ .direction_output = pxa_gpio_direction_output, ++ .get = pxa_gpio_get, ++ .set = pxa_gpio_set, ++ .base = 64, ++ .ngpio = 32, /* 21 for PXA25x */ ++ }, ++ }, ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) ++ [3] = { ++ .regbase = GPIO3_BASE, ++ .chip = { ++ .label = "gpio-3", ++ .direction_input = pxa_gpio_direction_input, ++ .direction_output = pxa_gpio_direction_output, ++ .get = pxa_gpio_get, ++ .set = pxa_gpio_set, ++ .base = 96, ++ .ngpio = 32, ++ }, ++ }, ++#endif ++}; ++ ++void __init pxa_init_gpio(int gpio_nr) ++{ ++ int i; ++ ++ /* add a GPIO chip for each register bank. ++ * the last PXA25x register only contains 21 GPIOs ++ */ ++ for (i = 0; i < gpio_nr; i += 32) { ++ if (i+32 > gpio_nr) ++ pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i; ++ gpiochip_add(&pxa_gpio_chip[i/32].chip); ++ } ++} +diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c +index 07acb45..d0965ef 100644 +--- a/arch/arm/mach-pxa/irq.c ++++ b/arch/arm/mach-pxa/irq.c +@@ -310,6 +310,8 @@ void __init pxa_init_irq_gpio(int gpio_nr) + /* Install handler for GPIO>=2 edge detect interrupts */ + set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low); + set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); ++ ++ pxa_init_gpio(gpio_nr); + } + + void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)) +diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h +index 9dbc2dc..bdbf5f9 100644 +--- a/include/asm-arm/arch-pxa/gpio.h ++++ b/include/asm-arm/arch-pxa/gpio.h +@@ -28,43 +28,35 @@ + #include + #include + +-static inline int gpio_request(unsigned gpio, const char *label) +-{ +- return 0; +-} ++#include + +-static inline void gpio_free(unsigned gpio) +-{ +- return; +-} + +-extern int gpio_direction_input(unsigned gpio); +-extern int gpio_direction_output(unsigned gpio, int value); ++/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). ++ * Those cases currently cause holes in the GPIO number space. ++ */ ++#define NR_BUILTIN_GPIO 128 + +-static inline int __gpio_get_value(unsigned gpio) ++static inline int gpio_get_value(unsigned gpio) + { +- return GPLR(gpio) & GPIO_bit(gpio); ++ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) ++ return GPLR(gpio) & GPIO_bit(gpio); ++ else ++ return __gpio_get_value(gpio); + } + +-#define gpio_get_value(gpio) \ +- (__builtin_constant_p(gpio) ? \ +- __gpio_get_value(gpio) : \ +- pxa_gpio_get_value(gpio)) +- +-static inline void __gpio_set_value(unsigned gpio, int value) ++static inline void gpio_set_value(unsigned gpio, int value) + { +- if (value) +- GPSR(gpio) = GPIO_bit(gpio); +- else +- GPCR(gpio) = GPIO_bit(gpio); ++ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { ++ if (value) ++ GPSR(gpio) = GPIO_bit(gpio); ++ else ++ GPCR(gpio) = GPIO_bit(gpio); ++ } else { ++ __gpio_set_value(gpio, value); ++ } + } + +-#define gpio_set_value(gpio,value) \ +- (__builtin_constant_p(gpio) ? \ +- __gpio_set_value(gpio, value) : \ +- pxa_gpio_set_value(gpio, value)) +- +-#include /* cansleep wrappers */ ++#define gpio_cansleep __gpio_cansleep + + #define gpio_to_irq(gpio) IRQ_GPIO(gpio) + #define irq_to_gpio(irq) IRQ_TO_GPIO(irq) +diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h +index 1bd398d..bd57417 100644 +--- a/include/asm-arm/arch-pxa/pxa-regs.h ++++ b/include/asm-arm/arch-pxa/pxa-regs.h +@@ -1131,6 +1131,19 @@ + * General Purpose I/O + */ + ++#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) ++#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) ++#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) ++#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) ++ ++#define GPLR_OFFSET 0x00 ++#define GPDR_OFFSET 0x0C ++#define GPSR_OFFSET 0x18 ++#define GPCR_OFFSET 0x24 ++#define GRER_OFFSET 0x30 ++#define GFER_OFFSET 0x3C ++#define GEDR_OFFSET 0x48 ++ + #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ + #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ + #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0024-Update-Documentation-gpio.txt-primarily-to-include.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0024-Update-Documentation-gpio.txt-primarily-to-include.patch new file mode 100644 index 0000000000..e460379de6 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0024-Update-Documentation-gpio.txt-primarily-to-include.patch @@ -0,0 +1,238 @@ +From 7ba82399f2d2df6114ad552999f2e1b9a19cb47a Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Sat, 19 Jan 2008 19:41:18 +0300 +Subject: [PATCH 24/64] Update Documentation/gpio.txt, primarily to include the new "gpiolib" + infrastructure. + +Signed-off-by: David Brownell +Cc: Jean Delvare +Cc: Eric Miao +Cc: Sam Ravnborg +Cc: Haavard Skinnemoen +Cc: Philipp Zabel +Cc: Russell King +Cc: Ben Gardner +Signed-off-by: Andrew Morton +--- + Documentation/gpio.txt | 133 +++++++++++++++++++++++++++++++++++++++++++---- + 1 files changed, 121 insertions(+), 12 deletions(-) + +diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt +index 6bc2ba2..8da724e 100644 +--- a/Documentation/gpio.txt ++++ b/Documentation/gpio.txt +@@ -32,7 +32,7 @@ The exact capabilities of GPIOs vary between systems. Common options: + - Input values are likewise readable (1, 0). Some chips support readback + of pins configured as "output", which is very useful in such "wire-OR" + cases (to support bidirectional signaling). GPIO controllers may have +- input de-glitch logic, sometimes with software controls. ++ input de-glitch/debounce logic, sometimes with software controls. + + - Inputs can often be used as IRQ signals, often edge triggered but + sometimes level triggered. Such IRQs may be configurable as system +@@ -60,10 +60,13 @@ used on a board that's wired differently. Only least-common-denominator + functionality can be very portable. Other features are platform-specific, + and that can be critical for glue logic. + +-Plus, this doesn't define an implementation framework, just an interface. ++Plus, this doesn't require any implementation framework, just an interface. + One platform might implement it as simple inline functions accessing chip + registers; another might implement it by delegating through abstractions +-used for several very different kinds of GPIO controller. ++used for several very different kinds of GPIO controller. (There is some ++optional code supporting such an implementation strategy, described later ++in this document, but drivers acting as clients to the GPIO interface must ++not care how it's implemented.) + + That said, if the convention is supported on their platform, drivers should + use it when possible. Platforms should declare GENERIC_GPIO support in +@@ -121,6 +124,11 @@ before tasking is enabled, as part of early board setup. + For output GPIOs, the value provided becomes the initial output value. + This helps avoid signal glitching during system startup. + ++For compatibility with legacy interfaces to GPIOs, setting the direction ++of a GPIO implicitly requests that GPIO (see below) if it has not been ++requested already. That compatibility may be removed in the future; ++explicitly requesting GPIOs is strongly preferred. ++ + Setting the direction can fail if the GPIO number is invalid, or when + that particular GPIO can't be used in that mode. It's generally a bad + idea to rely on boot firmware to have set the direction correctly, since +@@ -133,6 +141,7 @@ Spinlock-Safe GPIO access + ------------------------- + Most GPIO controllers can be accessed with memory read/write instructions. + That doesn't need to sleep, and can safely be done from inside IRQ handlers. ++(That includes hardirq contexts on RT kernels.) + + Use these calls to access such GPIOs: + +@@ -145,7 +154,7 @@ Use these calls to access such GPIOs: + The values are boolean, zero for low, nonzero for high. When reading the + value of an output pin, the value returned should be what's seen on the + pin ... that won't always match the specified output value, because of +-issues including wire-OR and output latencies. ++issues including open-drain signaling and output latencies. + + The get/set calls have no error returns because "invalid GPIO" should have + been reported earlier from gpio_direction_*(). However, note that not all +@@ -170,7 +179,8 @@ get to the head of a queue to transmit a command and get its response. + This requires sleeping, which can't be done from inside IRQ handlers. + + Platforms that support this type of GPIO distinguish them from other GPIOs +-by returning nonzero from this call: ++by returning nonzero from this call (which requires a valid GPIO number, ++either explicitly or implicitly requested): + + int gpio_cansleep(unsigned gpio); + +@@ -209,8 +219,11 @@ before tasking is enabled, as part of early board setup. + These calls serve two basic purposes. One is marking the signals which + are actually in use as GPIOs, for better diagnostics; systems may have + several hundred potential GPIOs, but often only a dozen are used on any +-given board. Another is to catch conflicts between drivers, reporting +-errors when drivers wrongly think they have exclusive use of that signal. ++given board. Another is to catch conflicts, identifying errors when ++(a) two or more drivers wrongly think they have exclusive use of that ++signal, or (b) something wrongly believes it's safe to remove drivers ++needed to manage a signal that's in active use. That is, requesting a ++GPIO can serve as a kind of lock. + + These two calls are optional because not not all current Linux platforms + offer such functionality in their GPIO support; a valid implementation +@@ -223,6 +236,9 @@ Note that requesting a GPIO does NOT cause it to be configured in any + way; it just marks that GPIO as in use. Separate code must handle any + pin setup (e.g. controlling which pin the GPIO uses, pullup/pulldown). + ++Also note that it's your responsibility to have stopped using a GPIO ++before you free it. ++ + + GPIOs mapped to IRQs + -------------------- +@@ -238,7 +254,7 @@ map between them using calls like: + + Those return either the corresponding number in the other namespace, or + else a negative errno code if the mapping can't be done. (For example, +-some GPIOs can't used as IRQs.) It is an unchecked error to use a GPIO ++some GPIOs can't be used as IRQs.) It is an unchecked error to use a GPIO + number that wasn't set up as an input using gpio_direction_input(), or + to use an IRQ number that didn't originally come from gpio_to_irq(). + +@@ -299,17 +315,110 @@ Related to multiplexing is configuration and enabling of the pullups or + pulldowns integrated on some platforms. Not all platforms support them, + or support them in the same way; and any given board might use external + pullups (or pulldowns) so that the on-chip ones should not be used. ++(When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.) + + There are other system-specific mechanisms that are not specified here, + like the aforementioned options for input de-glitching and wire-OR output. + Hardware may support reading or writing GPIOs in gangs, but that's usually + configuration dependent: for GPIOs sharing the same bank. (GPIOs are + commonly grouped in banks of 16 or 32, with a given SOC having several such +-banks.) Some systems can trigger IRQs from output GPIOs. Code relying on +-such mechanisms will necessarily be nonportable. ++banks.) Some systems can trigger IRQs from output GPIOs, or read values ++from pins not managed as GPIOs. Code relying on such mechanisms will ++necessarily be nonportable. + +-Dynamic definition of GPIOs is not currently supported; for example, as ++Dynamic definition of GPIOs is not currently standard; for example, as + a side effect of configuring an add-on board with some GPIO expanders. + + These calls are purely for kernel space, but a userspace API could be built +-on top of it. ++on top of them. ++ ++ ++GPIO implementor's framework (OPTIONAL) ++======================================= ++As noted earlier, there is an optional implementation framework making it ++easier for platforms to support different kinds of GPIO controller using ++the same programming interface. ++ ++As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file ++will be found there. That will list all the controllers registered through ++this framework, and the state of the GPIOs currently in use. ++ ++ ++Controller Drivers: gpio_chip ++----------------------------- ++In this framework each GPIO controller is packaged as a "struct gpio_chip" ++with information common to each controller of that type: ++ ++ - methods to establish GPIO direction ++ - methods used to access GPIO values ++ - flag saying whether calls to its methods may sleep ++ - optional debugfs dump method (showing extra state like pullup config) ++ - label for diagnostics ++ ++There is also per-instance data, which may come from device.platform_data: ++the number of its first GPIO, and how many GPIOs it exposes. ++ ++The code implementing a gpio_chip should support multiple instances of the ++controller, possibly using the driver model. That code will configure each ++gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be ++rare; use gpiochip_remove() when it is unavoidable. ++ ++Most often a gpio_chip is part of an instance-specific structure with state ++not exposed by the GPIO interfaces, such as addressing, power management, ++and more. Chips such as codecs will have complex non-GPIO state, ++ ++Any debugfs dump method should normally ignore signals which haven't been ++requested as GPIOs. They can use gpiochip_is_requested(), which returns ++either NULL or the label associated with that GPIO when it was requested. ++ ++ ++Platform Support ++---------------- ++To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB" ++and arrange that its includes and defines ++three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep(). ++They may also want to provide a custom value for ARCH_NR_GPIOS. ++ ++Trivial implementations of those functions can directly use framework ++code, which always dispatches through the gpio_chip: ++ ++ #define gpio_get_value __gpio_get_value ++ #define gpio_set_value __gpio_set_value ++ #define gpio_cansleep __gpio_cansleep ++ ++Fancier implementations could instead define those as inline functions with ++logic optimizing access to specific SOC-based GPIOs. For example, if the ++referenced GPIO is the constant "12", getting or setting its value could ++cost as little as two or three instructions, never sleeping. When such an ++optimization is not possible those calls must delegate to the framework ++code, costing at least a few dozen instructions. For bitbanged I/O, such ++instruction savings can be significant. ++ ++For SOCs, platform-specific code defines and registers gpio_chip instances ++for each bank of on-chip GPIOs. Those GPIOs should be numbered/labeled to ++match chip vendor documentation, and directly match board schematics. They ++may well start at zero and go up to a platform-specific limit. Such GPIOs ++are normally integrated into platform initialization to make them always be ++available, from arch_initcall() or earlier; they can often serve as IRQs. ++ ++ ++Board Support ++------------- ++For external GPIO controllers -- such as I2C or SPI expanders, ASICs, multi ++function devices, FPGAs or CPLDs -- most often board-specific code handles ++registering controller devices and ensures that their drivers know what GPIO ++numbers to use with gpiochip_add(). Their numbers often start right after ++platform-specific GPIOs. ++ ++For example, board setup code could create structures identifying the range ++of GPIOs that chip will expose, and passes them to each GPIO expander chip ++using platform_data. Then the chip driver's probe() routine could pass that ++data to gpiochip_add(). ++ ++Initialization order can be important. For example, when a device relies on ++an I2C-based GPIO, its probe() routine should only be called after that GPIO ++becomes available. That may mean the device should not be registered until ++calls for that GPIO can work. One way to address such dependencies is for ++such gpio_chip controllers to provide setup() and teardown() callbacks to ++board specific code; those board specific callbacks would register devices ++once all the necessary resources are available. +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0025-Signed-off-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0025-Signed-off-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch new file mode 100644 index 0000000000..84d0fd3e19 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0025-Signed-off-by-Dmitry-Baryshkov-dbaryshkov-gmail.co.patch @@ -0,0 +1,434 @@ +From 39717c1328f6aa13330eded0e0e268993cfd1eea Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Tue, 12 Feb 2008 10:39:53 +0300 +Subject: [PATCH 25/64] Signed-off-by: Dmitry Baryshkov + +--- + arch/arm/mach-pxa/Makefile | 2 +- + arch/arm/mach-pxa/devices.c | 401 +++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 402 insertions(+), 1 deletions(-) + create mode 100644 arch/arm/mach-pxa/devices.c + +diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile +index 5cb0216..f276d24 100644 +--- a/arch/arm/mach-pxa/Makefile ++++ b/arch/arm/mach-pxa/Makefile +@@ -4,7 +4,7 @@ + + # Common support (must be linked before board specific support) + obj-y += clock.o generic.o irq.o dma.o \ +- time.o gpio.o ++ time.o gpio.o devices.o + obj-$(CONFIG_PXA25x) += pxa25x.o + obj-$(CONFIG_PXA27x) += pxa27x.o + obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o +diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c +new file mode 100644 +index 0000000..928131a +--- /dev/null ++++ b/arch/arm/mach-pxa/devices.c +@@ -0,0 +1,401 @@ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "devices.h" ++ ++#ifdef CONFIG_PXA25x ++ ++static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32); ++ ++static struct resource pxa25x_resource_ssp[] = { ++ [0] = { ++ .start = 0x41000000, ++ .end = 0x4100001f, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_SSP, ++ .end = IRQ_SSP, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ /* DRCMR for RX */ ++ .start = 13, ++ .end = 13, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ /* DRCMR for TX */ ++ .start = 14, ++ .end = 14, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa25x_device_ssp = { ++ .name = "pxa25x-ssp", ++ .id = 0, ++ .dev = { ++ .dma_mask = &pxa25x_ssp_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++ .resource = pxa25x_resource_ssp, ++ .num_resources = ARRAY_SIZE(pxa25x_resource_ssp), ++}; ++ ++static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32); ++ ++static struct resource pxa25x_resource_nssp[] = { ++ [0] = { ++ .start = 0x41400000, ++ .end = 0x4140002f, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_NSSP, ++ .end = IRQ_NSSP, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ /* DRCMR for RX */ ++ .start = 15, ++ .end = 15, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ /* DRCMR for TX */ ++ .start = 16, ++ .end = 16, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa25x_device_nssp = { ++ .name = "pxa25x-nssp", ++ .id = 1, ++ .dev = { ++ .dma_mask = &pxa25x_nssp_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++ .resource = pxa25x_resource_nssp, ++ .num_resources = ARRAY_SIZE(pxa25x_resource_nssp), ++}; ++ ++static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32); ++ ++static struct resource pxa25x_resource_assp[] = { ++ [0] = { ++ .start = 0x41500000, ++ .end = 0x4150002f, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_ASSP, ++ .end = IRQ_ASSP, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ /* DRCMR for RX */ ++ .start = 23, ++ .end = 23, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ /* DRCMR for TX */ ++ .start = 24, ++ .end = 24, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa25x_device_assp = { ++ /* ASSP is basically equivalent to NSSP */ ++ .name = "pxa25x-nssp", ++ .id = 2, ++ .dev = { ++ .dma_mask = &pxa25x_assp_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++ .resource = pxa25x_resource_assp, ++ .num_resources = ARRAY_SIZE(pxa25x_resource_assp), ++}; ++#endif /* CONFIG_PXA25x */ ++ ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) ++ ++static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32); ++ ++static struct resource pxa27x_resource_ohci[] = { ++ [0] = { ++ .start = 0x4C000000, ++ .end = 0x4C00ff6f, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_USBH1, ++ .end = IRQ_USBH1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device pxa27x_device_ohci = { ++ .name = "pxa27x-ohci", ++ .id = -1, ++ .dev = { ++ .dma_mask = &pxa27x_ohci_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++ .num_resources = ARRAY_SIZE(pxa27x_resource_ohci), ++ .resource = pxa27x_resource_ohci, ++}; ++ ++void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) ++{ ++ pxa_register_device(&pxa27x_device_ohci, info); ++} ++ ++static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32); ++ ++static struct resource pxa27x_resource_ssp1[] = { ++ [0] = { ++ .start = 0x41000000, ++ .end = 0x4100003f, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_SSP, ++ .end = IRQ_SSP, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ /* DRCMR for RX */ ++ .start = 13, ++ .end = 13, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ /* DRCMR for TX */ ++ .start = 14, ++ .end = 14, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa27x_device_ssp1 = { ++ .name = "pxa27x-ssp", ++ .id = 0, ++ .dev = { ++ .dma_mask = &pxa27x_ssp1_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++ .resource = pxa27x_resource_ssp1, ++ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp1), ++}; ++ ++static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32); ++ ++static struct resource pxa27x_resource_ssp2[] = { ++ [0] = { ++ .start = 0x41700000, ++ .end = 0x4170003f, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_SSP2, ++ .end = IRQ_SSP2, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ /* DRCMR for RX */ ++ .start = 15, ++ .end = 15, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ /* DRCMR for TX */ ++ .start = 16, ++ .end = 16, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa27x_device_ssp2 = { ++ .name = "pxa27x-ssp", ++ .id = 1, ++ .dev = { ++ .dma_mask = &pxa27x_ssp2_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++ .resource = pxa27x_resource_ssp2, ++ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp2), ++}; ++ ++static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32); ++ ++static struct resource pxa27x_resource_ssp3[] = { ++ [0] = { ++ .start = 0x41900000, ++ .end = 0x4190003f, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_SSP3, ++ .end = IRQ_SSP3, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ /* DRCMR for RX */ ++ .start = 66, ++ .end = 66, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ /* DRCMR for TX */ ++ .start = 67, ++ .end = 67, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa27x_device_ssp3 = { ++ .name = "pxa27x-ssp", ++ .id = 2, ++ .dev = { ++ .dma_mask = &pxa27x_ssp3_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++ .resource = pxa27x_resource_ssp3, ++ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), ++}; ++#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ ++ ++#ifdef CONFIG_PXA3xx ++static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32); ++ ++static struct resource pxa3xx_resource_ssp4[] = { ++ [0] = { ++ .start = 0x41a00000, ++ .end = 0x41a0003f, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_SSP4, ++ .end = IRQ_SSP4, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ /* DRCMR for RX */ ++ .start = 2, ++ .end = 2, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ /* DRCMR for TX */ ++ .start = 3, ++ .end = 3, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa3xx_device_ssp4 = { ++ /* PXA3xx SSP is basically equivalent to PXA27x */ ++ .name = "pxa27x-ssp", ++ .id = 3, ++ .dev = { ++ .dma_mask = &pxa3xx_ssp4_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++ .resource = pxa3xx_resource_ssp4, ++ .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4), ++}; ++ ++static struct resource pxa3xx_resources_mci2[] = { ++ [0] = { ++ .start = 0x42000000, ++ .end = 0x42000fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_MMC2, ++ .end = IRQ_MMC2, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ .start = 93, ++ .end = 93, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ .start = 94, ++ .end = 94, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa3xx_device_mci2 = { ++ .name = "pxa2xx-mci", ++ .id = 1, ++ .dev = { ++ .dma_mask = &pxamci_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(pxa3xx_resources_mci2), ++ .resource = pxa3xx_resources_mci2, ++}; ++ ++void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info) ++{ ++ pxa_register_device(&pxa3xx_device_mci2, info); ++} ++ ++static struct resource pxa3xx_resources_mci3[] = { ++ [0] = { ++ .start = 0x42500000, ++ .end = 0x42500fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_MMC3, ++ .end = IRQ_MMC3, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ .start = 100, ++ .end = 100, ++ .flags = IORESOURCE_DMA, ++ }, ++ [3] = { ++ .start = 101, ++ .end = 101, ++ .flags = IORESOURCE_DMA, ++ }, ++}; ++ ++struct platform_device pxa3xx_device_mci3 = { ++ .name = "pxa2xx-mci", ++ .id = 2, ++ .dev = { ++ .dma_mask = &pxamci_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(pxa3xx_resources_mci3), ++ .resource = pxa3xx_resources_mci3, ++}; ++ ++void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info) ++{ ++ pxa_register_device(&pxa3xx_device_mci3, info); ++} ++ ++#endif /* CONFIG_PXA3xx */ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch new file mode 100644 index 0000000000..e1323e4edc --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch @@ -0,0 +1,134 @@ +From cbe46408b666983284e8be290950d526dbc0f0a4 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:08:16 +0300 +Subject: [PATCH 26/64] I don't think we should check for IRQs when determining which one + of power supplies to register. Better use is_{ac,usb}_online + callbacks, this will not produce an obstacle to implement polling -- + when irqs aren't mandatory. I'll send my two pending patches to show + the idea. + +For this particular issue, I think something like that should work. +If it works for you, I'll commit that version, preserving your +authorship, of course. +--- + drivers/power/pda_power.c | 80 ++++++++++++++++++++++++-------------------- + 1 files changed, 44 insertions(+), 36 deletions(-) + +diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c +index c058f28..d98622f 100644 +--- a/drivers/power/pda_power.c ++++ b/drivers/power/pda_power.c +@@ -168,66 +168,74 @@ static int pda_power_probe(struct platform_device *pdev) + pda_power_supplies[1].num_supplicants = pdata->num_supplicants; + } + +- ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]); +- if (ret) { +- dev_err(dev, "failed to register %s power supply\n", +- pda_power_supplies[0].name); +- goto supply0_failed; +- } ++ if (pdata->is_ac_online) { ++ ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]); ++ if (ret) { ++ dev_err(dev, "failed to register %s power supply\n", ++ pda_power_supplies[0].name); ++ goto ac_supply_failed; ++ } + +- ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]); +- if (ret) { +- dev_err(dev, "failed to register %s power supply\n", +- pda_power_supplies[1].name); +- goto supply1_failed; ++ if (ac_irq) { ++ ret = request_irq(ac_irq->start, power_changed_isr, ++ get_irq_flags(ac_irq), ac_irq->name, ++ &pda_power_supplies[0]); ++ if (ret) { ++ dev_err(dev, "request ac irq failed\n"); ++ goto ac_irq_failed; ++ } ++ } + } + +- if (ac_irq) { +- ret = request_irq(ac_irq->start, power_changed_isr, +- get_irq_flags(ac_irq), ac_irq->name, +- &pda_power_supplies[0]); ++ if (pdata->is_usb_online) { ++ ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]); + if (ret) { +- dev_err(dev, "request ac irq failed\n"); +- goto ac_irq_failed; ++ dev_err(dev, "failed to register %s power supply\n", ++ pda_power_supplies[1].name); ++ goto usb_supply_failed; + } +- } + +- if (usb_irq) { +- ret = request_irq(usb_irq->start, power_changed_isr, +- get_irq_flags(usb_irq), usb_irq->name, +- &pda_power_supplies[1]); +- if (ret) { +- dev_err(dev, "request usb irq failed\n"); +- goto usb_irq_failed; ++ if (usb_irq) { ++ ret = request_irq(usb_irq->start, power_changed_isr, ++ get_irq_flags(usb_irq), ++ usb_irq->name, ++ &pda_power_supplies[1]); ++ if (ret) { ++ dev_err(dev, "request usb irq failed\n"); ++ goto usb_irq_failed; ++ } + } + } + +- goto success; ++ return 0; + + usb_irq_failed: +- if (ac_irq) ++ if (pdata->is_usb_online) ++ power_supply_unregister(&pda_power_supplies[1]); ++usb_supply_failed: ++ if (pdata->is_ac_online && ac_irq) + free_irq(ac_irq->start, &pda_power_supplies[0]); + ac_irq_failed: +- power_supply_unregister(&pda_power_supplies[1]); +-supply1_failed: +- power_supply_unregister(&pda_power_supplies[0]); +-supply0_failed: ++ if (pdata->is_ac_online) ++ power_supply_unregister(&pda_power_supplies[0]); ++ac_supply_failed: + noirqs: + wrongid: +-success: + return ret; + } + + static int pda_power_remove(struct platform_device *pdev) + { +- if (usb_irq) ++ if (pdata->is_usb_online && usb_irq) + free_irq(usb_irq->start, &pda_power_supplies[1]); +- if (ac_irq) ++ if (pdata->is_ac_online && ac_irq) + free_irq(ac_irq->start, &pda_power_supplies[0]); + del_timer_sync(&charger_timer); + del_timer_sync(&supply_timer); +- power_supply_unregister(&pda_power_supplies[1]); +- power_supply_unregister(&pda_power_supplies[0]); ++ if (pdata->is_usb_online) ++ power_supply_unregister(&pda_power_supplies[1]); ++ if (pdata->is_ac_online) ++ power_supply_unregister(&pda_power_supplies[0]); + return 0; + } + +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch new file mode 100644 index 0000000000..240d2d0bd9 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch @@ -0,0 +1,59 @@ +From e5e9808fd5ed9cb54dd9da9fb91b32c4f7e9da52 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:08:17 +0300 +Subject: [PATCH 27/64] Add LiMn (one of the most common for small non-rechargable batteries)i + battery technology and voltage_min/_max properties support. + +Signed-off-by: Dmitry Baryshkov +--- + drivers/power/power_supply_sysfs.c | 5 ++++- + include/linux/power_supply.h | 3 +++ + 2 files changed, 7 insertions(+), 1 deletions(-) + +diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c +index 249f61b..45d2f95 100644 +--- a/drivers/power/power_supply_sysfs.c ++++ b/drivers/power/power_supply_sysfs.c +@@ -46,7 +46,8 @@ static ssize_t power_supply_show_property(struct device *dev, + "Unspecified failure" + }; + static char *technology_text[] = { +- "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd" ++ "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", ++ "LiMn" + }; + static char *capacity_level_text[] = { + "Unknown", "Critical", "Low", "Normal", "High", "Full" +@@ -88,6 +89,8 @@ static struct device_attribute power_supply_attrs[] = { + POWER_SUPPLY_ATTR(present), + POWER_SUPPLY_ATTR(online), + POWER_SUPPLY_ATTR(technology), ++ POWER_SUPPLY_ATTR(voltage_max), ++ POWER_SUPPLY_ATTR(voltage_min), + POWER_SUPPLY_ATTR(voltage_max_design), + POWER_SUPPLY_ATTR(voltage_min_design), + POWER_SUPPLY_ATTR(voltage_now), +diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h +index 606c095..cdbc5b8 100644 +--- a/include/linux/power_supply.h ++++ b/include/linux/power_supply.h +@@ -54,6 +54,7 @@ enum { + POWER_SUPPLY_TECHNOLOGY_LIPO, + POWER_SUPPLY_TECHNOLOGY_LiFe, + POWER_SUPPLY_TECHNOLOGY_NiCd, ++ POWER_SUPPLY_TECHNOLOGY_LiMn, + }; + + enum { +@@ -72,6 +73,8 @@ enum power_supply_property { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_TECHNOLOGY, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX, ++ POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch new file mode 100644 index 0000000000..ac5df97dff --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch @@ -0,0 +1,72 @@ +From df0801d2cd6a7081700c79f437d1185cbe1960a7 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:08:18 +0300 +Subject: [PATCH 28/64] Add suspend/resume/wakeup support for pda_power. + Now with device_init_wakeup. + +Signed-off-by: Dmitry Baryshkov +--- + drivers/power/pda_power.c | 34 ++++++++++++++++++++++++++++++++++ + 1 files changed, 34 insertions(+), 0 deletions(-) + +diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c +index d98622f..28360e8 100644 +--- a/drivers/power/pda_power.c ++++ b/drivers/power/pda_power.c +@@ -207,6 +207,8 @@ static int pda_power_probe(struct platform_device *pdev) + } + } + ++ device_init_wakeup(&pdev->dev, 1); ++ + return 0; + + usb_irq_failed: +@@ -239,12 +241,44 @@ static int pda_power_remove(struct platform_device *pdev) + return 0; + } + ++#ifdef CONFIG_PM ++static int pda_power_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ if (device_may_wakeup(&pdev->dev)) { ++ if (ac_irq) ++ enable_irq_wake(ac_irq->start); ++ if (usb_irq) ++ enable_irq_wake(usb_irq->start); ++ } ++ ++ return 0; ++} ++ ++static int pda_power_resume(struct platform_device *pdev) ++{ ++ if (device_may_wakeup(&pdev->dev)) { ++ if (usb_irq) ++ disable_irq_wake(usb_irq->start); ++ if (ac_irq) ++ disable_irq_wake(ac_irq->start); ++ } ++ ++ return 0; ++} ++#else ++#define pda_power_suspend NULL ++#define pda_power_resume NULL ++#endif ++ ++ + static struct platform_driver pda_power_pdrv = { + .driver = { + .name = "pda-power", + }, + .probe = pda_power_probe, + .remove = pda_power_remove, ++ .suspend = pda_power_suspend, ++ .resume = pda_power_resume, + }; + + static int __init pda_power_init(void) +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0029-Support-using-VOLTAGE_-properties-for-apm-calculati.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0029-Support-using-VOLTAGE_-properties-for-apm-calculati.patch new file mode 100644 index 0000000000..7347fd5a00 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0029-Support-using-VOLTAGE_-properties-for-apm-calculati.patch @@ -0,0 +1,163 @@ +From 57d1450b4e5f27fa78c75895dc30213bde7191bc Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:08:18 +0300 +Subject: [PATCH 29/64] Support using VOLTAGE_* properties for apm calculations. It's pretty + dummy, but useful for batteries for which we can only get voltages. + +--- + drivers/power/apm_power.c | 63 ++++++++++++++++++++++++++++++++++++-------- + 1 files changed, 51 insertions(+), 12 deletions(-) + +diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c +index bbf3ee1..526c96e 100644 +--- a/drivers/power/apm_power.c ++++ b/drivers/power/apm_power.c +@@ -13,6 +13,12 @@ + #include + #include + ++typedef enum { ++ SOURCE_ENERGY, ++ SOURCE_CHARGE, ++ SOURCE_VOLTAGE, ++} apm_source; ++ + #define PSY_PROP(psy, prop, val) psy->get_property(psy, \ + POWER_SUPPLY_PROP_##prop, val) + +@@ -87,7 +93,7 @@ static void find_main_battery(void) + } + } + +-static int calculate_time(int status, int using_charge) ++static int calculate_time(int status, apm_source source) + { + union power_supply_propval full; + union power_supply_propval empty; +@@ -106,20 +112,34 @@ static int calculate_time(int status, int using_charge) + return -1; + } + +- if (using_charge) { ++ switch (source) { ++ case SOURCE_CHARGE: + full_prop = POWER_SUPPLY_PROP_CHARGE_FULL; + full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN; + empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY; + empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY; + cur_avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG; + cur_now_prop = POWER_SUPPLY_PROP_CHARGE_NOW; +- } else { ++ break; ++ case SOURCE_ENERGY: + full_prop = POWER_SUPPLY_PROP_ENERGY_FULL; + full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN; + empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY; + empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY; + cur_avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG; + cur_now_prop = POWER_SUPPLY_PROP_ENERGY_NOW; ++ break; ++ case SOURCE_VOLTAGE: ++ full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX; ++ full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN; ++ empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN; ++ empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN; ++ cur_avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG; ++ cur_now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW; ++ break; ++ default: ++ printk(KERN_ERR "Unsupported source: %d\n", source); ++ return -1; + } + + if (_MPSY_PROP(full_prop, &full)) { +@@ -146,7 +166,7 @@ static int calculate_time(int status, int using_charge) + return -((cur.intval - empty.intval) * 60L) / I.intval; + } + +-static int calculate_capacity(int using_charge) ++static int calculate_capacity(apm_source source) + { + enum power_supply_property full_prop, empty_prop; + enum power_supply_property full_design_prop, empty_design_prop; +@@ -154,20 +174,33 @@ static int calculate_capacity(int using_charge) + union power_supply_propval empty, full, cur; + int ret; + +- if (using_charge) { ++ switch (source) { ++ case SOURCE_CHARGE: + full_prop = POWER_SUPPLY_PROP_CHARGE_FULL; + empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY; + full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN; + empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN; + now_prop = POWER_SUPPLY_PROP_CHARGE_NOW; + avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG; +- } else { ++ break; ++ case SOURCE_ENERGY: + full_prop = POWER_SUPPLY_PROP_ENERGY_FULL; + empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY; + full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN; + empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN; + now_prop = POWER_SUPPLY_PROP_ENERGY_NOW; + avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG; ++ case SOURCE_VOLTAGE: ++ full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX; ++ empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN; ++ full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN; ++ empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN; ++ now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW; ++ avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG; ++ break; ++ default: ++ printk(KERN_ERR "Unsupported source: %d\n", source); ++ return -1; + } + + if (_MPSY_PROP(full_prop, &full)) { +@@ -234,10 +267,12 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info) + info->battery_life = capacity.intval; + } else { + /* try calculate using energy */ +- info->battery_life = calculate_capacity(0); ++ info->battery_life = calculate_capacity(SOURCE_ENERGY); + /* if failed try calculate using charge instead */ + if (info->battery_life == -1) +- info->battery_life = calculate_capacity(1); ++ info->battery_life = calculate_capacity(SOURCE_CHARGE); ++ if (info->battery_life == -1) ++ info->battery_life = calculate_capacity(SOURCE_VOLTAGE); + } + + /* charging status */ +@@ -263,18 +298,22 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info) + !MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full)) { + info->time = time_to_full.intval / 60; + } else { +- info->time = calculate_time(status.intval, 0); ++ info->time = calculate_time(status.intval, SOURCE_ENERGY); + if (info->time == -1) +- info->time = calculate_time(status.intval, 1); ++ info->time = calculate_time(status.intval, SOURCE_CHARGE); ++ if (info->time == -1) ++ info->time = calculate_time(status.intval, SOURCE_VOLTAGE); + } + } else { + if (!MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty) || + !MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty)) { + info->time = time_to_empty.intval / 60; + } else { +- info->time = calculate_time(status.intval, 0); ++ info->time = calculate_time(status.intval, SOURCE_ENERGY); ++ if (info->time == -1) ++ info->time = calculate_time(status.intval, SOURCE_CHARGE); + if (info->time == -1) +- info->time = calculate_time(status.intval, 1); ++ info->time = calculate_time(status.intval, SOURCE_VOLTAGE); + } + } + +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0030-Core-driver-for-WM97xx-touchscreens.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0030-Core-driver-for-WM97xx-touchscreens.patch new file mode 100644 index 0000000000..1c86a39c74 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0030-Core-driver-for-WM97xx-touchscreens.patch @@ -0,0 +1,1083 @@ +From d3e044e0e10e6c6b75716cb927e92b4ec284132f Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Sat, 26 Jan 2008 21:14:20 +0300 +Subject: [PATCH 30/64] Core driver for WM97xx touchscreens + +This patch series adds support for the touchscreen controllers provided +by Wolfson Microelectronics WM97xx series chips in both polled and +streaming modes. + +These drivers have been maintained out of tree since 2003. During that +time the driver the primary maintainer was Liam Girdwood and a number of +people have made contributions including Stanley Cai, Rodolfo Giometti, +Russell King, Marc Kleine-Budde, Ian Molton, Vincent Sanders, Andrew +Zabolotny, Graeme Gregory, Mike Arthur and myself. Apologies to anyone +I have omitted. + +Signed-off-by: Liam Girdwood +Signed-off-by: Graeme Gregory +Signed-off-by: Mike Arthur +Signed-off-by: Mark Brown +Cc: Dmitry Baryshkov +Cc: Stanley Cai +Cc: Rodolfo Giometti +Cc: Russell King +Cc: Marc Kleine-Budde +Cc: Ian Molton +Cc: Vincent Sanders +Cc: Andrew Zabolotny +--- + drivers/input/touchscreen/wm97xx-core.c | 724 +++++++++++++++++++++++++++++++ + include/linux/wm97xx.h | 309 +++++++++++++ + 2 files changed, 1033 insertions(+), 0 deletions(-) + create mode 100644 drivers/input/touchscreen/wm97xx-core.c + create mode 100644 include/linux/wm97xx.h + +diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c +new file mode 100644 +index 0000000..27a0a99 +--- /dev/null ++++ b/drivers/input/touchscreen/wm97xx-core.c +@@ -0,0 +1,724 @@ ++/* ++ * wm97xx-core.c -- Touch screen driver core for Wolfson WM9705, WM9712 ++ * and WM9713 AC97 Codecs. ++ * ++ * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC. ++ * Author: Liam Girdwood ++ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com ++ * Parts Copyright : Ian Molton ++ * Andrew Zabolotny ++ * Russell King ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * Notes: ++ * ++ * Features: ++ * - supports WM9705, WM9712, WM9713 ++ * - polling mode ++ * - continuous mode (arch-dependent) ++ * - adjustable rpu/dpp settings ++ * - adjustable pressure current ++ * - adjustable sample settle delay ++ * - 4 and 5 wire touchscreens (5 wire is WM9712 only) ++ * - pen down detection ++ * - battery monitor ++ * - sample AUX adcs ++ * - power management ++ * - codec GPIO ++ * - codec event notification ++ * Todo ++ * - Support for async sampling control for noisy LCDs. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define TS_NAME "wm97xx" ++#define WM_CORE_VERSION "0.65" ++#define DEFAULT_PRESSURE 0xb0c0 ++ ++ ++/* ++ * Touchscreen absolute values ++ * ++ * These parameters are used to help the input layer discard out of ++ * range readings and reduce jitter etc. ++ * ++ * o min, max:- indicate the min and max values your touch screen returns ++ * o fuzz:- use a higher number to reduce jitter ++ * ++ * The default values correspond to Mainstone II in QVGA mode ++ * ++ * Please read ++ * Documentation/input/input-programming.txt for more details. ++ */ ++ ++static int abs_x[3] = {350, 3900, 5}; ++module_param_array(abs_x, int, NULL, 0); ++MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz"); ++ ++static int abs_y[3] = {320, 3750, 40}; ++module_param_array(abs_y, int, NULL, 0); ++MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz"); ++ ++static int abs_p[3] = {0, 150, 4}; ++module_param_array(abs_p, int, NULL, 0); ++MODULE_PARM_DESC(abs_p, "Touchscreen absolute Pressure min, max, fuzz"); ++ ++/* ++ * wm97xx IO access, all IO locking done by AC97 layer ++ */ ++int wm97xx_reg_read(struct wm97xx *wm, u16 reg) ++{ ++ if (wm->ac97) ++ return wm->ac97->bus->ops->read(wm->ac97, reg); ++ else ++ return -1; ++} ++EXPORT_SYMBOL_GPL(wm97xx_reg_read); ++ ++void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val) ++{ ++ /* cache digitiser registers */ ++ if (reg >= AC97_WM9713_DIG1 && reg <= AC97_WM9713_DIG3) ++ wm->dig[(reg - AC97_WM9713_DIG1) >> 1] = val; ++ ++ /* cache gpio regs */ ++ if (reg >= AC97_GPIO_CFG && reg <= AC97_MISC_AFE) ++ wm->gpio[(reg - AC97_GPIO_CFG) >> 1] = val; ++ ++ /* wm9713 irq reg */ ++ if (reg == 0x5a) ++ wm->misc = val; ++ ++ if (wm->ac97) ++ wm->ac97->bus->ops->write(wm->ac97, reg, val); ++} ++EXPORT_SYMBOL_GPL(wm97xx_reg_write); ++ ++/** ++ * wm97xx_read_aux_adc - Read the aux adc. ++ * @wm: wm97xx device. ++ * @adcsel: codec ADC to be read ++ * ++ * Reads the selected AUX ADC. ++ */ ++ ++int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel) ++{ ++ int power_adc = 0, auxval; ++ u16 power = 0; ++ ++ /* get codec */ ++ mutex_lock(&wm->codec_mutex); ++ ++ /* When the touchscreen is not in use, we may have to power up ++ * the AUX ADC before we can use sample the AUX inputs-> ++ */ ++ if (wm->id == WM9713_ID2 && ++ (power = wm97xx_reg_read(wm, AC97_EXTENDED_MID)) & 0x8000) { ++ power_adc = 1; ++ wm97xx_reg_write(wm, AC97_EXTENDED_MID, power & 0x7fff); ++ } ++ ++ /* Prepare the codec for AUX reading */ ++ wm->codec->aux_prepare(wm); ++ ++ /* Turn polling mode on to read AUX ADC */ ++ wm->pen_probably_down = 1; ++ wm->codec->poll_sample(wm, adcsel, &auxval); ++ ++ if (power_adc) ++ wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000); ++ ++ wm->codec->dig_restore(wm); ++ ++ wm->pen_probably_down = 0; ++ ++ mutex_unlock(&wm->codec_mutex); ++ return auxval & 0xfff; ++} ++EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc); ++ ++/** ++ * wm97xx_get_gpio - Get the status of a codec GPIO. ++ * @wm: wm97xx device. ++ * @gpio: gpio ++ * ++ * Get the status of a codec GPIO pin ++ */ ++ ++enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio) ++{ ++ u16 status; ++ enum wm97xx_gpio_status ret; ++ ++ mutex_lock(&wm->codec_mutex); ++ status = wm97xx_reg_read(wm, AC97_GPIO_STATUS); ++ ++ if (status & gpio) ++ ret = WM97XX_GPIO_HIGH; ++ else ++ ret = WM97XX_GPIO_LOW; ++ ++ mutex_unlock(&wm->codec_mutex); ++ return ret; ++} ++EXPORT_SYMBOL_GPL(wm97xx_get_gpio); ++ ++/** ++ * wm97xx_set_gpio - Set the status of a codec GPIO. ++ * @wm: wm97xx device. ++ * @gpio: gpio ++ * ++ * ++ * Set the status of a codec GPIO pin ++ */ ++ ++void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio, ++ enum wm97xx_gpio_status status) ++{ ++ u16 reg; ++ ++ mutex_lock(&wm->codec_mutex); ++ reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS); ++ ++ if (status & WM97XX_GPIO_HIGH) ++ reg |= gpio; ++ else ++ reg &= ~gpio; ++ ++ if (wm->id == WM9712_ID2) ++ wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1); ++ else ++ wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg); ++ mutex_unlock(&wm->codec_mutex); ++} ++EXPORT_SYMBOL_GPL(wm97xx_set_gpio); ++ ++/* ++ * Codec GPIO pin configuration, this sets pin direction, polarity, ++ * stickyness and wake up. ++ */ ++void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir, ++ enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky, ++ enum wm97xx_gpio_wake wake) ++{ ++ u16 reg; ++ ++ mutex_lock(&wm->codec_mutex); ++ reg = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); ++ ++ if (pol == WM97XX_GPIO_POL_HIGH) ++ reg |= gpio; ++ else ++ reg &= ~gpio; ++ ++ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, reg); ++ reg = wm97xx_reg_read(wm, AC97_GPIO_STICKY); ++ ++ if (sticky == WM97XX_GPIO_STICKY) ++ reg |= gpio; ++ else ++ reg &= ~gpio; ++ ++ wm97xx_reg_write(wm, AC97_GPIO_STICKY, reg); ++ reg = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); ++ ++ if (wake == WM97XX_GPIO_WAKE) ++ reg |= gpio; ++ else ++ reg &= ~gpio; ++ ++ wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, reg); ++ reg = wm97xx_reg_read(wm, AC97_GPIO_CFG); ++ ++ if (dir == WM97XX_GPIO_IN) ++ reg |= gpio; ++ else ++ reg &= ~gpio; ++ ++ wm97xx_reg_write(wm, AC97_GPIO_CFG, reg); ++ mutex_unlock(&wm->codec_mutex); ++} ++EXPORT_SYMBOL_GPL(wm97xx_config_gpio); ++ ++/* ++ * Handle a pen down interrupt. ++ */ ++static void wm97xx_pen_irq_worker(struct work_struct *work) ++{ ++ struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work); ++ ++ /* do we need to enable the touch panel reader */ ++ if (wm->id == WM9705_ID2) { ++ if (wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD) & ++ WM97XX_PEN_DOWN) ++ wm->pen_is_down = 1; ++ else ++ wm->pen_is_down = 0; ++ } else { ++ u16 status, pol; ++ mutex_lock(&wm->codec_mutex); ++ status = wm97xx_reg_read(wm, AC97_GPIO_STATUS); ++ pol = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); ++ ++ if (WM97XX_GPIO_13 & pol & status) { ++ wm->pen_is_down = 1; ++ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol & ++ ~WM97XX_GPIO_13); ++ } else { ++ wm->pen_is_down = 0; ++ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol | ++ WM97XX_GPIO_13); ++ } ++ ++ if (wm->id == WM9712_ID2) ++ wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status & ++ ~WM97XX_GPIO_13) << 1); ++ else ++ wm97xx_reg_write(wm, AC97_GPIO_STATUS, status & ++ ~WM97XX_GPIO_13); ++ mutex_unlock(&wm->codec_mutex); ++ } ++ ++ queue_delayed_work(wm->ts_workq, &wm->ts_reader, 0); ++ ++ if (!wm->pen_is_down && wm->mach_ops && wm->mach_ops->acc_enabled) ++ wm->mach_ops->acc_pen_up(wm); ++ wm->mach_ops->irq_enable(wm, 1); ++} ++ ++/* ++ * Codec PENDOWN irq handler ++ * ++ * We have to disable the codec interrupt in the handler because it can ++ * take upto 1ms to clear the interrupt source. The interrupt is then enabled ++ * again in the slow handler when the source has been cleared. ++ */ ++static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) ++{ ++ struct wm97xx *wm = dev_id; ++ wm->mach_ops->irq_enable(wm, 0); ++ queue_work(wm->ts_workq, &wm->pen_event_work); ++ return IRQ_HANDLED; ++} ++ ++/* ++ * initialise pen IRQ handler and workqueue ++ */ ++static int wm97xx_init_pen_irq(struct wm97xx *wm) ++{ ++ u16 reg; ++ ++ /* If an interrupt is supplied an IRQ enable operation must also be ++ * provided. */ ++ BUG_ON(!wm->mach_ops->irq_enable); ++ ++ INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker); ++ ++ if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, ++ "wm97xx-pen", wm)) { ++ dev_err(wm->dev, ++ "Failed to register pen down interrupt, polling"); ++ wm->pen_irq = 0; ++ return -EINVAL; ++ } ++ ++ /* enable PEN down on wm9712/13 */ ++ if (wm->id != WM9705_ID2) { ++ reg = wm97xx_reg_read(wm, AC97_MISC_AFE); ++ wm97xx_reg_write(wm, AC97_MISC_AFE, reg & 0xfffb); ++ reg = wm97xx_reg_read(wm, 0x5a); ++ wm97xx_reg_write(wm, 0x5a, reg & ~0x0001); ++ } ++ ++ return 0; ++} ++ ++static int wm97xx_read_samples(struct wm97xx *wm) ++{ ++ struct wm97xx_data data; ++ int rc; ++ ++ mutex_lock(&wm->codec_mutex); ++ ++ if (wm->mach_ops && wm->mach_ops->acc_enabled) ++ rc = wm->mach_ops->acc_pen_down(wm); ++ else ++ rc = wm->codec->poll_touch(wm, &data); ++ ++ if (rc & RC_PENUP) { ++ if (wm->pen_is_down) { ++ wm->pen_is_down = 0; ++ dev_dbg(wm->dev, "pen up\n"); ++ input_report_abs(wm->input_dev, ABS_PRESSURE, 0); ++ input_sync(wm->input_dev); ++ } else if (!(rc & RC_AGAIN)) { ++ /* We need high frequency updates only while ++ * pen is down, the user never will be able to ++ * touch screen faster than a few times per ++ * second... On the other hand, when the user ++ * is actively working with the touchscreen we ++ * don't want to lose the quick response. So we ++ * will slowly increase sleep time after the ++ * pen is up and quicky restore it to ~one task ++ * switch when pen is down again. ++ */ ++ if (wm->ts_reader_interval < HZ / 10) ++ wm->ts_reader_interval++; ++ } ++ ++ } else if (rc & RC_VALID) { ++ dev_dbg(wm->dev, ++ "pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n", ++ data.x >> 12, data.x & 0xfff, data.y >> 12, ++ data.y & 0xfff, data.p >> 12, data.p & 0xfff); ++ input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff); ++ input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff); ++ input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff); ++ input_sync(wm->input_dev); ++ wm->pen_is_down = 1; ++ wm->ts_reader_interval = wm->ts_reader_min_interval; ++ } else if (rc & RC_PENDOWN) { ++ dev_dbg(wm->dev, "pen down"); ++ wm->pen_is_down = 1; ++ wm->ts_reader_interval = wm->ts_reader_min_interval; ++ } ++ ++ mutex_unlock(&wm->codec_mutex); ++ return rc; ++} ++ ++/* ++* The touchscreen sample reader. ++*/ ++static void wm97xx_ts_reader(struct work_struct *work) ++{ ++ int rc; ++ struct wm97xx *wm = container_of(work, struct wm97xx, ts_reader.work); ++ ++ BUG_ON(!wm->codec); ++ ++ do { ++ rc = wm97xx_read_samples(wm); ++ } while (rc & RC_AGAIN); ++ ++ if (wm->pen_is_down || !wm->pen_irq) ++ queue_delayed_work(wm->ts_workq, &wm->ts_reader, ++ wm->ts_reader_interval); ++} ++ ++/** ++ * wm97xx_ts_input_open - Open the touch screen input device. ++ * @idev: Input device to be opened. ++ * ++ * Called by the input sub system to open a wm97xx touchscreen device. ++ * Starts the touchscreen thread and touch digitiser. ++ */ ++static int wm97xx_ts_input_open(struct input_dev *idev) ++{ ++ struct wm97xx *wm = input_get_drvdata(idev); ++ ++ wm->ts_workq = create_singlethread_workqueue("kwm97xx"); ++ if (wm->ts_workq == NULL) { ++ dev_err(wm->dev, ++ "Failed to create workqueue\n"); ++ return -EINVAL; ++ } ++ ++ /* start digitiser */ ++ if (wm->mach_ops && wm->mach_ops->acc_enabled) ++ wm->codec->acc_enable(wm, 1); ++ wm->codec->dig_enable(wm, 1); ++ ++ INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader); ++ ++ wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1; ++ if (wm->ts_reader_min_interval < 1) ++ wm->ts_reader_min_interval = 1; ++ wm->ts_reader_interval = wm->ts_reader_min_interval; ++ ++ wm->pen_is_down = 0; ++ if (wm->pen_irq) ++ wm97xx_init_pen_irq(wm); ++ else ++ dev_err(wm->dev, "No IRQ specified\n"); ++ ++ /* If we either don't have an interrupt for pen down events or ++ * failed to acquire it then we need to poll. ++ */ ++ if (wm->pen_irq == 0) ++ queue_delayed_work(wm->ts_workq, &wm->ts_reader, ++ wm->ts_reader_interval); ++ ++ return 0; ++} ++ ++/** ++ * wm97xx_ts_input_close - Close the touch screen input device. ++ * @idev: Input device to be closed. ++ * ++ * Called by the input sub system to close a wm97xx touchscreen device. ++ * Kills the touchscreen thread and stops the touch digitiser. ++ */ ++ ++static void wm97xx_ts_input_close(struct input_dev *idev) ++{ ++ struct wm97xx *wm = input_get_drvdata(idev); ++ ++ if (wm->pen_irq) ++ free_irq(wm->pen_irq, wm); ++ ++ wm->pen_is_down = 0; ++ ++ /* ts_reader rearms itself so we need to explicitly stop it ++ * before we destroy the workqueue. ++ */ ++ cancel_delayed_work_sync(&wm->ts_reader); ++ destroy_workqueue(wm->ts_workq); ++ ++ /* stop digitiser */ ++ wm->codec->dig_enable(wm, 0); ++ if (wm->mach_ops && wm->mach_ops->acc_enabled) ++ wm->codec->acc_enable(wm, 0); ++} ++ ++static int wm97xx_probe(struct device *dev) ++{ ++ struct wm97xx *wm; ++ int ret = 0, id = 0; ++ ++ wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL); ++ if (!wm) ++ return -ENOMEM; ++ mutex_init(&wm->codec_mutex); ++ ++ wm->dev = dev; ++ dev->driver_data = wm; ++ wm->ac97 = to_ac97_t(dev); ++ ++ /* check that we have a supported codec */ ++ id = wm97xx_reg_read(wm, AC97_VENDOR_ID1); ++ if (id != WM97XX_ID1) { ++ dev_err(dev, "Device with vendor %04x is not a wm97xx\n", id); ++ kfree(wm); ++ return -ENODEV; ++ } ++ ++ wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2); ++ ++ dev_info(wm->dev, "detected a wm97%02x codec", wm->id & 0xff); ++ ++ switch (wm->id & 0xff) { ++#ifdef CONFIG_TOUCHSCREEN_WM9705 ++ case 0x05: ++ wm->codec = &wm9705_codec; ++ break; ++#endif ++#ifdef CONFIG_TOUCHSCREEN_WM9712 ++ case 0x12: ++ wm->codec = &wm9712_codec; ++ break; ++#endif ++#ifdef CONFIG_TOUCHSCREEN_WM9713 ++ case 0x13: ++ wm->codec = &wm9713_codec; ++ break; ++#endif ++ default: ++ dev_err(wm->dev, "Support for wm97%02x not compiled in.\n", ++ wm->id & 0xff); ++ kfree(wm); ++ return -ENODEV; ++ } ++ ++ wm->input_dev = input_allocate_device(); ++ if (wm->input_dev == NULL) { ++ kfree(wm); ++ return -ENOMEM; ++ } ++ ++ /* set up touch configuration */ ++ wm->input_dev->name = "wm97xx touchscreen"; ++ wm->input_dev->open = wm97xx_ts_input_open; ++ wm->input_dev->close = wm97xx_ts_input_close; ++ set_bit(EV_ABS, wm->input_dev->evbit); ++ set_bit(ABS_X, wm->input_dev->absbit); ++ set_bit(ABS_Y, wm->input_dev->absbit); ++ set_bit(ABS_PRESSURE, wm->input_dev->absbit); ++ input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1], ++ abs_x[2], 0); ++ input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1], ++ abs_y[2], 0); ++ input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1], ++ abs_p[2], 0); ++ input_set_drvdata(wm->input_dev, wm); ++ wm->input_dev->dev.parent = dev; ++ ret = input_register_device(wm->input_dev); ++ if (ret < 0) { ++ input_free_device(wm->input_dev); ++ kfree(wm); ++ return -ENOMEM; ++ } ++ ++ /* set up physical characteristics */ ++ wm->codec->phy_init(wm); ++ ++ /* load gpio cache */ ++ wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG); ++ wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); ++ wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY); ++ wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); ++ wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); ++ wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); ++ ++ /* register our battery device */ ++ wm->battery_dev = platform_device_alloc("wm97xx-battery", 0); ++ if (!wm->battery_dev) ++ goto batt_err; ++ platform_set_drvdata(wm->battery_dev, wm); ++ wm->battery_dev->dev.parent = dev; ++ ret = platform_device_register(wm->battery_dev); ++ if (ret < 0) ++ goto batt_reg_err; ++ ++ /* register our extended touch device (for machine specific ++ * extensions) */ ++ wm->touch_dev = platform_device_alloc("wm97xx-touch", 0); ++ if (!wm->touch_dev) ++ goto touch_err; ++ platform_set_drvdata(wm->touch_dev, wm); ++ wm->touch_dev->dev.parent = dev; ++ ret = platform_device_register(wm->touch_dev); ++ if (ret < 0) ++ goto touch_reg_err; ++ ++ return ret; ++ ++ touch_reg_err: ++ platform_device_put(wm->touch_dev); ++ touch_err: ++ platform_device_unregister(wm->battery_dev); ++ batt_reg_err: ++ platform_device_put(wm->battery_dev); ++ batt_err: ++ input_unregister_device(wm->input_dev); ++ kfree(wm); ++ return ret; ++} ++ ++static int wm97xx_remove(struct device *dev) ++{ ++ struct wm97xx *wm = dev_get_drvdata(dev); ++ ++ platform_device_unregister(wm->battery_dev); ++ platform_device_unregister(wm->touch_dev); ++ input_unregister_device(wm->input_dev); ++ ++ kfree(wm); ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int wm97xx_resume(struct device *dev) ++{ ++ struct wm97xx *wm = dev_get_drvdata(dev); ++ ++ /* restore digitiser and gpios */ ++ if (wm->id == WM9713_ID2) { ++ wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig[0]); ++ wm97xx_reg_write(wm, 0x5a, wm->misc); ++ if (wm->input_dev->users) { ++ u16 reg; ++ reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) & 0x7fff; ++ wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg); ++ } ++ } ++ ++ wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig[1]); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2]); ++ ++ wm97xx_reg_write(wm, AC97_GPIO_CFG, wm->gpio[0]); ++ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, wm->gpio[1]); ++ wm97xx_reg_write(wm, AC97_GPIO_STICKY, wm->gpio[2]); ++ wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, wm->gpio[3]); ++ wm97xx_reg_write(wm, AC97_GPIO_STATUS, wm->gpio[4]); ++ wm97xx_reg_write(wm, AC97_MISC_AFE, wm->gpio[5]); ++ ++ return 0; ++} ++ ++#else ++#define wm97xx_resume NULL ++#endif ++ ++/* ++ * Machine specific operations ++ */ ++int wm97xx_register_mach_ops(struct wm97xx *wm, ++ struct wm97xx_mach_ops *mach_ops) ++{ ++ mutex_lock(&wm->codec_mutex); ++ if (wm->mach_ops) { ++ mutex_unlock(&wm->codec_mutex); ++ return -EINVAL; ++ } ++ wm->mach_ops = mach_ops; ++ mutex_unlock(&wm->codec_mutex); ++ return 0; ++} ++EXPORT_SYMBOL_GPL(wm97xx_register_mach_ops); ++ ++void wm97xx_unregister_mach_ops(struct wm97xx *wm) ++{ ++ mutex_lock(&wm->codec_mutex); ++ wm->mach_ops = NULL; ++ mutex_unlock(&wm->codec_mutex); ++} ++EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops); ++ ++static struct device_driver wm97xx_driver = { ++ .name = "ac97", ++ .bus = &ac97_bus_type, ++ .owner = THIS_MODULE, ++ .probe = wm97xx_probe, ++ .remove = wm97xx_remove, ++ .resume = wm97xx_resume, ++}; ++ ++static int __init wm97xx_init(void) ++{ ++ return driver_register(&wm97xx_driver); ++} ++ ++static void __exit wm97xx_exit(void) ++{ ++ driver_unregister(&wm97xx_driver); ++} ++ ++module_init(wm97xx_init); ++module_exit(wm97xx_exit); ++ ++/* Module information */ ++MODULE_AUTHOR("Liam Girdwood "); ++MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver"); ++MODULE_LICENSE("GPL"); +diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h +new file mode 100644 +index 0000000..fc6e0b3 +--- /dev/null ++++ b/include/linux/wm97xx.h +@@ -0,0 +1,309 @@ ++ ++/* ++ * Register bits and API for Wolfson WM97xx series of codecs ++ */ ++ ++#ifndef _LINUX_WM97XX_H ++#define _LINUX_WM97XX_H ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include /* Input device layer */ ++#include ++ ++/* ++ * WM97xx AC97 Touchscreen registers ++ */ ++#define AC97_WM97XX_DIGITISER1 0x76 ++#define AC97_WM97XX_DIGITISER2 0x78 ++#define AC97_WM97XX_DIGITISER_RD 0x7a ++#define AC97_WM9713_DIG1 0x74 ++#define AC97_WM9713_DIG2 AC97_WM97XX_DIGITISER1 ++#define AC97_WM9713_DIG3 AC97_WM97XX_DIGITISER2 ++ ++/* ++ * WM97xx register bits ++ */ ++#define WM97XX_POLL 0x8000 /* initiate a polling measurement */ ++#define WM97XX_ADCSEL_X 0x1000 /* x coord measurement */ ++#define WM97XX_ADCSEL_Y 0x2000 /* y coord measurement */ ++#define WM97XX_ADCSEL_PRES 0x3000 /* pressure measurement */ ++#define WM97XX_ADCSEL_MASK 0x7000 ++#define WM97XX_COO 0x0800 /* enable coordinate mode */ ++#define WM97XX_CTC 0x0400 /* enable continuous mode */ ++#define WM97XX_CM_RATE_93 0x0000 /* 93.75Hz continuous rate */ ++#define WM97XX_CM_RATE_187 0x0100 /* 187.5Hz continuous rate */ ++#define WM97XX_CM_RATE_375 0x0200 /* 375Hz continuous rate */ ++#define WM97XX_CM_RATE_750 0x0300 /* 750Hz continuous rate */ ++#define WM97XX_CM_RATE_8K 0x00f0 /* 8kHz continuous rate */ ++#define WM97XX_CM_RATE_12K 0x01f0 /* 12kHz continuous rate */ ++#define WM97XX_CM_RATE_24K 0x02f0 /* 24kHz continuous rate */ ++#define WM97XX_CM_RATE_48K 0x03f0 /* 48kHz continuous rate */ ++#define WM97XX_CM_RATE_MASK 0x03f0 ++#define WM97XX_RATE(i) (((i & 3) << 8) | ((i & 4) ? 0xf0 : 0)) ++#define WM97XX_DELAY(i) ((i << 4) & 0x00f0) /* sample delay times */ ++#define WM97XX_DELAY_MASK 0x00f0 ++#define WM97XX_SLEN 0x0008 /* slot read back enable */ ++#define WM97XX_SLT(i) ((i - 5) & 0x7) /* panel slot (5-11) */ ++#define WM97XX_SLT_MASK 0x0007 ++#define WM97XX_PRP_DETW 0x4000 /* detect on, digitise off, wake */ ++#define WM97XX_PRP_DET 0x8000 /* detect on, digitise off, no wake */ ++#define WM97XX_PRP_DET_DIG 0xc000 /* setect on, digitise on */ ++#define WM97XX_RPR 0x2000 /* wake up on pen down */ ++#define WM97XX_PEN_DOWN 0x8000 /* pen is down */ ++#define WM97XX_ADCSRC_MASK 0x7000 /* ADC source mask */ ++ ++#define WM97XX_AUX_ID1 0x8001 ++#define WM97XX_AUX_ID2 0x8002 ++#define WM97XX_AUX_ID3 0x8003 ++#define WM97XX_AUX_ID4 0x8004 ++ ++ ++/* WM9712 Bits */ ++#define WM9712_45W 0x1000 /* set for 5-wire touchscreen */ ++#define WM9712_PDEN 0x0800 /* measure only when pen down */ ++#define WM9712_WAIT 0x0200 /* wait until adc is read before next sample */ ++#define WM9712_PIL 0x0100 /* current used for pressure measurement. set 400uA else 200uA */ ++#define WM9712_MASK_HI 0x0040 /* hi on mask pin (47) stops conversions */ ++#define WM9712_MASK_EDGE 0x0080 /* rising/falling edge on pin delays sample */ ++#define WM9712_MASK_SYNC 0x00c0 /* rising/falling edge on mask initiates sample */ ++#define WM9712_RPU(i) (i&0x3f) /* internal pull up on pen detect (64k / rpu) */ ++#define WM9712_PD(i) (0x1 << i) /* power management */ ++ ++/* WM9712 Registers */ ++#define AC97_WM9712_POWER 0x24 ++#define AC97_WM9712_REV 0x58 ++ ++/* WM9705 Bits */ ++#define WM9705_PDEN 0x1000 /* measure only when pen is down */ ++#define WM9705_PINV 0x0800 /* inverts sense of pen down output */ ++#define WM9705_BSEN 0x0400 /* BUSY flag enable, pin47 is 1 when busy */ ++#define WM9705_BINV 0x0200 /* invert BUSY (pin47) output */ ++#define WM9705_WAIT 0x0100 /* wait until adc is read before next sample */ ++#define WM9705_PIL 0x0080 /* current used for pressure measurement. set 400uA else 200uA */ ++#define WM9705_PHIZ 0x0040 /* set PHONE and PCBEEP inputs to high impedance */ ++#define WM9705_MASK_HI 0x0010 /* hi on mask stops conversions */ ++#define WM9705_MASK_EDGE 0x0020 /* rising/falling edge on pin delays sample */ ++#define WM9705_MASK_SYNC 0x0030 /* rising/falling edge on mask initiates sample */ ++#define WM9705_PDD(i) (i & 0x000f) /* pen detect comparator threshold */ ++ ++ ++/* WM9713 Bits */ ++#define WM9713_PDPOL 0x0400 /* Pen down polarity */ ++#define WM9713_POLL 0x0200 /* initiate a polling measurement */ ++#define WM9713_CTC 0x0100 /* enable continuous mode */ ++#define WM9713_ADCSEL_X 0x0002 /* X measurement */ ++#define WM9713_ADCSEL_Y 0x0004 /* Y measurement */ ++#define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */ ++#define WM9713_COO 0x0001 /* enable coordinate mode */ ++#define WM9713_PDEN 0x0800 /* measure only when pen down */ ++#define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */ ++#define WM9713_WAIT 0x0200 /* coordinate wait */ ++ ++/* AUX ADC ID's */ ++#define TS_COMP1 0x0 ++#define TS_COMP2 0x1 ++#define TS_BMON 0x2 ++#define TS_WIPER 0x3 ++ ++/* ID numbers */ ++#define WM97XX_ID1 0x574d ++#define WM9712_ID2 0x4c12 ++#define WM9705_ID2 0x4c05 ++#define WM9713_ID2 0x4c13 ++ ++/* Codec GPIO's */ ++#define WM97XX_MAX_GPIO 16 ++#define WM97XX_GPIO_1 (1 << 1) ++#define WM97XX_GPIO_2 (1 << 2) ++#define WM97XX_GPIO_3 (1 << 3) ++#define WM97XX_GPIO_4 (1 << 4) ++#define WM97XX_GPIO_5 (1 << 5) ++#define WM97XX_GPIO_6 (1 << 6) ++#define WM97XX_GPIO_7 (1 << 7) ++#define WM97XX_GPIO_8 (1 << 8) ++#define WM97XX_GPIO_9 (1 << 9) ++#define WM97XX_GPIO_10 (1 << 10) ++#define WM97XX_GPIO_11 (1 << 11) ++#define WM97XX_GPIO_12 (1 << 12) ++#define WM97XX_GPIO_13 (1 << 13) ++#define WM97XX_GPIO_14 (1 << 14) ++#define WM97XX_GPIO_15 (1 << 15) ++ ++ ++#define AC97_LINK_FRAME 21 /* time in uS for AC97 link frame */ ++ ++ ++/*---------------- Return codes from sample reading functions ---------------*/ ++ ++/* More data is available; call the sample gathering function again */ ++#define RC_AGAIN 0x00000001 ++/* The returned sample is valid */ ++#define RC_VALID 0x00000002 ++/* The pen is up (the first RC_VALID without RC_PENUP means pen is down) */ ++#define RC_PENUP 0x00000004 ++/* The pen is down (RC_VALID implies RC_PENDOWN, but sometimes it is helpful ++ to tell the handler that the pen is down but we don't know yet his coords, ++ so the handler should not sleep or wait for pendown irq) */ ++#define RC_PENDOWN 0x00000008 ++ ++/* ++ * The wm97xx driver provides a private API for writing platform-specific ++ * drivers. ++ */ ++ ++/* The structure used to return arch specific sampled data into */ ++struct wm97xx_data { ++ int x; ++ int y; ++ int p; ++}; ++ ++/* ++ * Codec GPIO status ++ */ ++enum wm97xx_gpio_status { ++ WM97XX_GPIO_HIGH, ++ WM97XX_GPIO_LOW ++}; ++ ++/* ++ * Codec GPIO direction ++ */ ++enum wm97xx_gpio_dir { ++ WM97XX_GPIO_IN, ++ WM97XX_GPIO_OUT ++}; ++ ++/* ++ * Codec GPIO polarity ++ */ ++enum wm97xx_gpio_pol { ++ WM97XX_GPIO_POL_HIGH, ++ WM97XX_GPIO_POL_LOW ++}; ++ ++/* ++ * Codec GPIO sticky ++ */ ++enum wm97xx_gpio_sticky { ++ WM97XX_GPIO_STICKY, ++ WM97XX_GPIO_NOTSTICKY ++}; ++ ++/* ++ * Codec GPIO wake ++ */ ++enum wm97xx_gpio_wake { ++ WM97XX_GPIO_WAKE, ++ WM97XX_GPIO_NOWAKE ++}; ++ ++/* ++ * Digitiser ioctl commands ++ */ ++#define WM97XX_DIG_START 0x1 ++#define WM97XX_DIG_STOP 0x2 ++#define WM97XX_PHY_INIT 0x3 ++#define WM97XX_AUX_PREPARE 0x4 ++#define WM97XX_DIG_RESTORE 0x5 ++ ++struct wm97xx; ++ ++extern struct wm97xx_codec_drv wm9705_codec; ++extern struct wm97xx_codec_drv wm9712_codec; ++extern struct wm97xx_codec_drv wm9713_codec; ++ ++/* ++ * Codec driver interface - allows mapping to WM9705/12/13 and newer codecs ++ */ ++struct wm97xx_codec_drv { ++ u16 id; ++ char *name; ++ ++ /* read 1 sample */ ++ int (*poll_sample) (struct wm97xx *, int adcsel, int *sample); ++ ++ /* read X,Y,[P] in poll */ ++ int (*poll_touch) (struct wm97xx *, struct wm97xx_data *); ++ ++ int (*acc_enable) (struct wm97xx *, int enable); ++ void (*phy_init) (struct wm97xx *); ++ void (*dig_enable) (struct wm97xx *, int enable); ++ void (*dig_restore) (struct wm97xx *); ++ void (*aux_prepare) (struct wm97xx *); ++}; ++ ++ ++/* Machine specific and accelerated touch operations */ ++struct wm97xx_mach_ops { ++ ++ /* accelerated touch readback - coords are transmited on AC97 link */ ++ int acc_enabled; ++ void (*acc_pen_up) (struct wm97xx *); ++ int (*acc_pen_down) (struct wm97xx *); ++ int (*acc_startup) (struct wm97xx *); ++ void (*acc_shutdown) (struct wm97xx *); ++ ++ /* interrupt mask control - required for accelerated operation */ ++ void (*irq_enable) (struct wm97xx *, int enable); ++ ++ /* pre and post sample - can be used to minimise any analog noise */ ++ void (*pre_sample) (int); /* function to run before sampling */ ++ void (*post_sample) (int); /* function to run after sampling */ ++}; ++ ++struct wm97xx { ++ u16 dig[3], id, gpio[6], misc; /* Cached codec registers */ ++ u16 dig_save[3]; /* saved during aux reading */ ++ struct wm97xx_codec_drv *codec; /* attached codec driver*/ ++ struct input_dev *input_dev; /* touchscreen input device */ ++ struct snd_ac97 *ac97; /* ALSA codec access */ ++ struct device *dev; /* ALSA device */ ++ struct platform_device *battery_dev; ++ struct platform_device *touch_dev; ++ struct wm97xx_mach_ops *mach_ops; ++ struct mutex codec_mutex; ++ struct delayed_work ts_reader; /* Used to poll touchscreen */ ++ unsigned long ts_reader_interval; /* Current interval for timer */ ++ unsigned long ts_reader_min_interval; /* Minimum interval */ ++ unsigned int pen_irq; /* Pen IRQ number in use */ ++ struct workqueue_struct *ts_workq; ++ struct work_struct pen_event_work; ++ u16 acc_slot; /* AC97 slot used for acc touch data */ ++ u16 acc_rate; /* acc touch data rate */ ++ unsigned pen_is_down:1; /* Pen is down */ ++ unsigned aux_waiting:1; /* aux measurement waiting */ ++ unsigned pen_probably_down:1; /* used in polling mode */ ++}; ++ ++/* ++ * Codec GPIO access (not supported on WM9705) ++ * This can be used to set/get codec GPIO and Virtual GPIO status. ++ */ ++enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio); ++void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio, ++ enum wm97xx_gpio_status status); ++void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, ++ enum wm97xx_gpio_dir dir, ++ enum wm97xx_gpio_pol pol, ++ enum wm97xx_gpio_sticky sticky, ++ enum wm97xx_gpio_wake wake); ++ ++/* codec AC97 IO access */ ++int wm97xx_reg_read(struct wm97xx *wm, u16 reg); ++void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val); ++ ++/* aux adc readback */ ++int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel); ++ ++/* machine ops */ ++int wm97xx_register_mach_ops(struct wm97xx *, struct wm97xx_mach_ops *); ++void wm97xx_unregister_mach_ops(struct wm97xx *); ++ ++#endif +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0031-Add-chip-driver-for-WM9705-touchscreen.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0031-Add-chip-driver-for-WM9705-touchscreen.patch new file mode 100644 index 0000000000..3890795f61 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0031-Add-chip-driver-for-WM9705-touchscreen.patch @@ -0,0 +1,383 @@ +From 7b366ca784d0540613a43908de803e4dedc100d3 Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Sat, 26 Jan 2008 21:14:20 +0300 +Subject: [PATCH 31/64] Add chip driver for WM9705 touchscreen + +Signed-off-by: Liam Girdwood +Signed-off-by: Graeme Gregory +Signed-off-by: Mike Arthur +Signed-off-by: Mark Brown +Cc: Dmitry Baryshkov +Cc: Stanley Cai +Cc: Rodolfo Giometti +Cc: Russell King +Cc: Marc Kleine-Budde +Cc: Ian Molton +Cc: Vince Sanders +Cc: Andrew Zabolotny +--- + drivers/input/touchscreen/wm9705.c | 352 ++++++++++++++++++++++++++++++++++++ + 1 files changed, 352 insertions(+), 0 deletions(-) + create mode 100644 drivers/input/touchscreen/wm9705.c + +diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c +new file mode 100644 +index 0000000..f185104 +--- /dev/null ++++ b/drivers/input/touchscreen/wm9705.c +@@ -0,0 +1,352 @@ ++/* ++ * wm9705.c -- Codec driver for Wolfson WM9705 AC97 Codec. ++ * ++ * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC. ++ * Author: Liam Girdwood ++ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com ++ * Parts Copyright : Ian Molton ++ * Andrew Zabolotny ++ * Russell King ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define TS_NAME "wm97xx" ++#define WM9705_VERSION "0.62" ++#define DEFAULT_PRESSURE 0xb0c0 ++ ++/* ++ * Module parameters ++ */ ++ ++/* ++ * Set current used for pressure measurement. ++ * ++ * Set pil = 2 to use 400uA ++ * pil = 1 to use 200uA and ++ * pil = 0 to disable pressure measurement. ++ * ++ * This is used to increase the range of values returned by the adc ++ * when measureing touchpanel pressure. ++ */ ++static int pil; ++module_param(pil, int, 0); ++MODULE_PARM_DESC(pil, "Set current used for pressure measurement."); ++ ++/* ++ * Set threshold for pressure measurement. ++ * ++ * Pen down pressure below threshold is ignored. ++ */ ++static int pressure = DEFAULT_PRESSURE & 0xfff; ++module_param(pressure, int, 0); ++MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement."); ++ ++/* ++ * Set adc sample delay. ++ * ++ * For accurate touchpanel measurements, some settling time may be ++ * required between the switch matrix applying a voltage across the ++ * touchpanel plate and the ADC sampling the signal. ++ * ++ * This delay can be set by setting delay = n, where n is the array ++ * position of the delay in the array delay_table below. ++ * Long delays > 1ms are supported for completeness, but are not ++ * recommended. ++ */ ++static int delay = 4; ++module_param(delay, int, 0); ++MODULE_PARM_DESC(delay, "Set adc sample delay."); ++ ++/* ++ * Pen detect comparator threshold. ++ * ++ * 0 to Vmid in 15 steps, 0 = use zero power comparator with Vmid threshold ++ * i.e. 1 = Vmid/15 threshold ++ * 15 = Vmid/1 threshold ++ * ++ * Adjust this value if you are having problems with pen detect not ++ * detecting any down events. ++ */ ++static int pdd = 8; ++module_param(pdd, int, 0); ++MODULE_PARM_DESC(pdd, "Set pen detect comparator threshold"); ++ ++/* ++ * Set adc mask function. ++ * ++ * Sources of glitch noise, such as signals driving an LCD display, may feed ++ * through to the touch screen plates and affect measurement accuracy. In ++ * order to minimise this, a signal may be applied to the MASK pin to delay or ++ * synchronise the sampling. ++ * ++ * 0 = No delay or sync ++ * 1 = High on pin stops conversions ++ * 2 = Edge triggered, edge on pin delays conversion by delay param (above) ++ * 3 = Edge triggered, edge on pin starts conversion after delay param ++ */ ++static int mask; ++module_param(mask, int, 0); ++MODULE_PARM_DESC(mask, "Set adc mask function."); ++ ++/* ++ * ADC sample delay times in uS ++ */ ++static const int delay_table[] = { ++ 21, /* 1 AC97 Link frames */ ++ 42, /* 2 */ ++ 84, /* 4 */ ++ 167, /* 8 */ ++ 333, /* 16 */ ++ 667, /* 32 */ ++ 1000, /* 48 */ ++ 1333, /* 64 */ ++ 2000, /* 96 */ ++ 2667, /* 128 */ ++ 3333, /* 160 */ ++ 4000, /* 192 */ ++ 4667, /* 224 */ ++ 5333, /* 256 */ ++ 6000, /* 288 */ ++ 0 /* No delay, switch matrix always on */ ++}; ++ ++/* ++ * Delay after issuing a POLL command. ++ * ++ * The delay is 3 AC97 link frames + the touchpanel settling delay ++ */ ++static inline void poll_delay(int d) ++{ ++ udelay(3 * AC97_LINK_FRAME + delay_table[d]); ++} ++ ++/* ++ * set up the physical settings of the WM9705 ++ */ ++static void wm9705_phy_init(struct wm97xx *wm) ++{ ++ u16 dig1 = 0, dig2 = WM97XX_RPR; ++ ++ /* ++ * mute VIDEO and AUX as they share X and Y touchscreen ++ * inputs on the WM9705 ++ */ ++ wm97xx_reg_write(wm, AC97_AUX, 0x8000); ++ wm97xx_reg_write(wm, AC97_VIDEO, 0x8000); ++ ++ /* touchpanel pressure current*/ ++ if (pil == 2) { ++ dig2 |= WM9705_PIL; ++ dev_dbg(wm->dev, ++ "setting pressure measurement current to 400uA."); ++ } else if (pil) ++ dev_dbg(wm->dev, ++ "setting pressure measurement current to 200uA."); ++ if (!pil) ++ pressure = 0; ++ ++ /* polling mode sample settling delay */ ++ if (delay != 4) { ++ if (delay < 0 || delay > 15) { ++ dev_dbg(wm->dev, "supplied delay out of range."); ++ delay = 4; ++ } ++ } ++ dig1 &= 0xff0f; ++ dig1 |= WM97XX_DELAY(delay); ++ dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.", ++ delay_table[delay]); ++ ++ /* WM9705 pdd */ ++ dig2 |= (pdd & 0x000f); ++ dev_dbg(wm->dev, "setting pdd to Vmid/%d", 1 - (pdd & 0x000f)); ++ ++ /* mask */ ++ dig2 |= ((mask & 0x3) << 4); ++ ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2); ++} ++ ++static void wm9705_dig_enable(struct wm97xx *wm, int enable) ++{ ++ if (enable) { ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, ++ wm->dig[2] | WM97XX_PRP_DET_DIG); ++ wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */ ++ } else ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, ++ wm->dig[2] & ~WM97XX_PRP_DET_DIG); ++} ++ ++static void wm9705_aux_prepare(struct wm97xx *wm) ++{ ++ memcpy(wm->dig_save, wm->dig, sizeof(wm->dig)); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG); ++} ++ ++static void wm9705_dig_restore(struct wm97xx *wm) ++{ ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]); ++} ++ ++static inline int is_pden(struct wm97xx *wm) ++{ ++ return wm->dig[2] & WM9705_PDEN; ++} ++ ++/* ++ * Read a sample from the WM9705 adc in polling mode. ++ */ ++static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample) ++{ ++ int timeout = 5 * delay; ++ ++ if (!wm->pen_probably_down) { ++ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (!(data & WM97XX_PEN_DOWN)) ++ return RC_PENUP; ++ wm->pen_probably_down = 1; ++ } ++ ++ /* set up digitiser */ ++ if (adcsel & 0x8000) ++ adcsel = ((adcsel & 0x7fff) + 3) << 12; ++ ++ if (wm->mach_ops && wm->mach_ops->pre_sample) ++ wm->mach_ops->pre_sample(adcsel); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, ++ adcsel | WM97XX_POLL | WM97XX_DELAY(delay)); ++ ++ /* wait 3 AC97 time slots + delay for conversion */ ++ poll_delay(delay); ++ ++ /* wait for POLL to go low */ ++ while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) ++ && timeout) { ++ udelay(AC97_LINK_FRAME); ++ timeout--; ++ } ++ ++ if (timeout <= 0) { ++ /* If PDEN is set, we can get a timeout when pen goes up */ ++ if (is_pden(wm)) ++ wm->pen_probably_down = 0; ++ else ++ dev_dbg(wm->dev, "adc sample timeout"); ++ return RC_PENUP; ++ } ++ ++ *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (wm->mach_ops && wm->mach_ops->post_sample) ++ wm->mach_ops->post_sample(adcsel); ++ ++ /* check we have correct sample */ ++ if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) { ++ dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel, ++ *sample & WM97XX_ADCSEL_MASK); ++ return RC_PENUP; ++ } ++ ++ if (!(*sample & WM97XX_PEN_DOWN)) { ++ wm->pen_probably_down = 0; ++ return RC_PENUP; ++ } ++ ++ return RC_VALID; ++} ++ ++/* ++ * Sample the WM9705 touchscreen in polling mode ++ */ ++static int wm9705_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) ++{ ++ int rc; ++ ++ rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X, &data->x); ++ if (rc != RC_VALID) ++ return rc; ++ rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y); ++ if (rc != RC_VALID) ++ return rc; ++ if (pil) { ++ rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p); ++ if (rc != RC_VALID) ++ return rc; ++ } else ++ data->p = DEFAULT_PRESSURE; ++ ++ return RC_VALID; ++} ++ ++/* ++ * Enable WM9705 continuous mode, i.e. touch data is streamed across ++ * an AC97 slot ++ */ ++static int wm9705_acc_enable(struct wm97xx *wm, int enable) ++{ ++ u16 dig1, dig2; ++ int ret = 0; ++ ++ dig1 = wm->dig[1]; ++ dig2 = wm->dig[2]; ++ ++ if (enable) { ++ /* continous mode */ ++ if (wm->mach_ops->acc_startup && ++ (ret = wm->mach_ops->acc_startup(wm)) < 0) ++ return ret; ++ dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK | ++ WM97XX_DELAY_MASK | WM97XX_SLT_MASK); ++ dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN | ++ WM97XX_DELAY(delay) | ++ WM97XX_SLT(wm->acc_slot) | ++ WM97XX_RATE(wm->acc_rate); ++ if (pil) ++ dig1 |= WM97XX_ADCSEL_PRES; ++ dig2 |= WM9705_PDEN; ++ } else { ++ dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN); ++ dig2 &= ~WM9705_PDEN; ++ if (wm->mach_ops->acc_shutdown) ++ wm->mach_ops->acc_shutdown(wm); ++ } ++ ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2); ++ return ret; ++} ++ ++struct wm97xx_codec_drv wm9705_codec = { ++ .id = WM9705_ID2, ++ .name = "wm9705", ++ .poll_sample = wm9705_poll_sample, ++ .poll_touch = wm9705_poll_touch, ++ .acc_enable = wm9705_acc_enable, ++ .phy_init = wm9705_phy_init, ++ .dig_enable = wm9705_dig_enable, ++ .dig_restore = wm9705_dig_restore, ++ .aux_prepare = wm9705_aux_prepare, ++}; ++EXPORT_SYMBOL_GPL(wm9705_codec); ++ ++/* Module information */ ++MODULE_AUTHOR("Liam Girdwood "); ++MODULE_DESCRIPTION("WM9705 Touch Screen Driver"); ++MODULE_LICENSE("GPL"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0032-Add-chip-driver-for-WM9712-touchscreen.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0032-Add-chip-driver-for-WM9712-touchscreen.patch new file mode 100644 index 0000000000..6265910a1e --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0032-Add-chip-driver-for-WM9712-touchscreen.patch @@ -0,0 +1,492 @@ +From b2640063b8321bdfb324c00d5f0c3366ac31696b Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Sat, 26 Jan 2008 21:14:19 +0300 +Subject: [PATCH 32/64] Add chip driver for WM9712 touchscreen + +Signed-off-by: Liam Girdwood +Signed-off-by: Graeme Gregory +Signed-off-by: Mike Arthur +Signed-off-by: Mark Brown +Cc: Dmitry Baryshkov +Cc: Stanley Cai +Cc: Rodolfo Giometti +Cc: Russell King +Cc: Marc Kleine-Budde +Cc: Ian Molton +Cc: Vince Sanders +Cc: Andrew Zabolotny +--- + drivers/input/touchscreen/wm9712.c | 461 ++++++++++++++++++++++++++++++++++++ + 1 files changed, 461 insertions(+), 0 deletions(-) + create mode 100644 drivers/input/touchscreen/wm9712.c + +diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c +new file mode 100644 +index 0000000..eaab326 +--- /dev/null ++++ b/drivers/input/touchscreen/wm9712.c +@@ -0,0 +1,461 @@ ++/* ++ * wm9712.c -- Codec driver for Wolfson WM9712 AC97 Codecs. ++ * ++ * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC. ++ * Author: Liam Girdwood ++ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com ++ * Parts Copyright : Ian Molton ++ * Andrew Zabolotny ++ * Russell King ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define TS_NAME "wm97xx" ++#define WM9712_VERSION "0.61" ++#define DEFAULT_PRESSURE 0xb0c0 ++ ++/* ++ * Module parameters ++ */ ++ ++/* ++ * Set internal pull up for pen detect. ++ * ++ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive) ++ * i.e. pull up resistance = 64k Ohms / rpu. ++ * ++ * Adjust this value if you are having problems with pen detect not ++ * detecting any down event. ++ */ ++static int rpu = 8; ++module_param(rpu, int, 0); ++MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect."); ++ ++/* ++ * Set current used for pressure measurement. ++ * ++ * Set pil = 2 to use 400uA ++ * pil = 1 to use 200uA and ++ * pil = 0 to disable pressure measurement. ++ * ++ * This is used to increase the range of values returned by the adc ++ * when measureing touchpanel pressure. ++ */ ++static int pil; ++module_param(pil, int, 0); ++MODULE_PARM_DESC(pil, "Set current used for pressure measurement."); ++ ++/* ++ * Set threshold for pressure measurement. ++ * ++ * Pen down pressure below threshold is ignored. ++ */ ++static int pressure = DEFAULT_PRESSURE & 0xfff; ++module_param(pressure, int, 0); ++MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement."); ++ ++/* ++ * Set adc sample delay. ++ * ++ * For accurate touchpanel measurements, some settling time may be ++ * required between the switch matrix applying a voltage across the ++ * touchpanel plate and the ADC sampling the signal. ++ * ++ * This delay can be set by setting delay = n, where n is the array ++ * position of the delay in the array delay_table below. ++ * Long delays > 1ms are supported for completeness, but are not ++ * recommended. ++ */ ++static int delay = 3; ++module_param(delay, int, 0); ++MODULE_PARM_DESC(delay, "Set adc sample delay."); ++ ++/* ++ * Set five_wire = 1 to use a 5 wire touchscreen. ++ * ++ * NOTE: Five wire mode does not allow for readback of pressure. ++ */ ++static int five_wire; ++module_param(five_wire, int, 0); ++MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen."); ++ ++/* ++ * Set adc mask function. ++ * ++ * Sources of glitch noise, such as signals driving an LCD display, may feed ++ * through to the touch screen plates and affect measurement accuracy. In ++ * order to minimise this, a signal may be applied to the MASK pin to delay or ++ * synchronise the sampling. ++ * ++ * 0 = No delay or sync ++ * 1 = High on pin stops conversions ++ * 2 = Edge triggered, edge on pin delays conversion by delay param (above) ++ * 3 = Edge triggered, edge on pin starts conversion after delay param ++ */ ++static int mask; ++module_param(mask, int, 0); ++MODULE_PARM_DESC(mask, "Set adc mask function."); ++ ++/* ++ * Coordinate Polling Enable. ++ * ++ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together ++ * for every poll. ++ */ ++static int coord; ++module_param(coord, int, 0); ++MODULE_PARM_DESC(coord, "Polling coordinate mode"); ++ ++/* ++ * ADC sample delay times in uS ++ */ ++static const int delay_table[] = { ++ 21, /* 1 AC97 Link frames */ ++ 42, /* 2 */ ++ 84, /* 4 */ ++ 167, /* 8 */ ++ 333, /* 16 */ ++ 667, /* 32 */ ++ 1000, /* 48 */ ++ 1333, /* 64 */ ++ 2000, /* 96 */ ++ 2667, /* 128 */ ++ 3333, /* 160 */ ++ 4000, /* 192 */ ++ 4667, /* 224 */ ++ 5333, /* 256 */ ++ 6000, /* 288 */ ++ 0 /* No delay, switch matrix always on */ ++}; ++ ++/* ++ * Delay after issuing a POLL command. ++ * ++ * The delay is 3 AC97 link frames + the touchpanel settling delay ++ */ ++static inline void poll_delay(int d) ++{ ++ udelay(3 * AC97_LINK_FRAME + delay_table[d]); ++} ++ ++/* ++ * set up the physical settings of the WM9712 ++ */ ++static void wm9712_phy_init(struct wm97xx *wm) ++{ ++ u16 dig1 = 0; ++ u16 dig2 = WM97XX_RPR | WM9712_RPU(1); ++ ++ /* WM9712 rpu */ ++ if (rpu) { ++ dig2 &= 0xffc0; ++ dig2 |= WM9712_RPU(rpu); ++ dev_dbg(wm->dev, "setting pen detect pull-up to %d Ohms", ++ 64000 / rpu); ++ } ++ ++ /* touchpanel pressure current*/ ++ if (pil == 2) { ++ dig2 |= WM9712_PIL; ++ dev_dbg(wm->dev, ++ "setting pressure measurement current to 400uA."); ++ } else if (pil) ++ dev_dbg(wm->dev, ++ "setting pressure measurement current to 200uA."); ++ if (!pil) ++ pressure = 0; ++ ++ /* WM9712 five wire */ ++ if (five_wire) { ++ dig2 |= WM9712_45W; ++ dev_dbg(wm->dev, "setting 5-wire touchscreen mode."); ++ } ++ ++ /* polling mode sample settling delay */ ++ if (delay < 0 || delay > 15) { ++ dev_dbg(wm->dev, "supplied delay out of range."); ++ delay = 4; ++ } ++ dig1 &= 0xff0f; ++ dig1 |= WM97XX_DELAY(delay); ++ dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.", ++ delay_table[delay]); ++ ++ /* mask */ ++ dig2 |= ((mask & 0x3) << 6); ++ if (mask) { ++ u16 reg; ++ /* Set GPIO4 as Mask Pin*/ ++ reg = wm97xx_reg_read(wm, AC97_MISC_AFE); ++ wm97xx_reg_write(wm, AC97_MISC_AFE, reg | WM97XX_GPIO_4); ++ reg = wm97xx_reg_read(wm, AC97_GPIO_CFG); ++ wm97xx_reg_write(wm, AC97_GPIO_CFG, reg | WM97XX_GPIO_4); ++ } ++ ++ /* wait - coord mode */ ++ if (coord) ++ dig2 |= WM9712_WAIT; ++ ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2); ++} ++ ++static void wm9712_dig_enable(struct wm97xx *wm, int enable) ++{ ++ u16 dig2 = wm->dig[2]; ++ ++ if (enable) { ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, ++ dig2 | WM97XX_PRP_DET_DIG); ++ wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */ ++ } else ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, ++ dig2 & ~WM97XX_PRP_DET_DIG); ++} ++ ++static void wm9712_aux_prepare(struct wm97xx *wm) ++{ ++ memcpy(wm->dig_save, wm->dig, sizeof(wm->dig)); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG); ++} ++ ++static void wm9712_dig_restore(struct wm97xx *wm) ++{ ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]); ++} ++ ++static inline int is_pden(struct wm97xx *wm) ++{ ++ return wm->dig[2] & WM9712_PDEN; ++} ++ ++/* ++ * Read a sample from the WM9712 adc in polling mode. ++ */ ++static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) ++{ ++ int timeout = 5 * delay; ++ ++ if (!wm->pen_probably_down) { ++ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (!(data & WM97XX_PEN_DOWN)) ++ return RC_PENUP; ++ wm->pen_probably_down = 1; ++ } ++ ++ /* set up digitiser */ ++ if (adcsel & 0x8000) ++ adcsel = ((adcsel & 0x7fff) + 3) << 12; ++ ++ if (wm->mach_ops && wm->mach_ops->pre_sample) ++ wm->mach_ops->pre_sample(adcsel); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, ++ adcsel | WM97XX_POLL | WM97XX_DELAY(delay)); ++ ++ /* wait 3 AC97 time slots + delay for conversion */ ++ poll_delay(delay); ++ ++ /* wait for POLL to go low */ ++ while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) ++ && timeout) { ++ udelay(AC97_LINK_FRAME); ++ timeout--; ++ } ++ ++ if (timeout <= 0) { ++ /* If PDEN is set, we can get a timeout when pen goes up */ ++ if (is_pden(wm)) ++ wm->pen_probably_down = 0; ++ else ++ dev_dbg(wm->dev, "adc sample timeout"); ++ return RC_PENUP; ++ } ++ ++ *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (wm->mach_ops && wm->mach_ops->post_sample) ++ wm->mach_ops->post_sample(adcsel); ++ ++ /* check we have correct sample */ ++ if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) { ++ dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel, ++ *sample & WM97XX_ADCSEL_MASK); ++ return RC_PENUP; ++ } ++ ++ if (!(*sample & WM97XX_PEN_DOWN)) { ++ wm->pen_probably_down = 0; ++ return RC_PENUP; ++ } ++ ++ return RC_VALID; ++} ++ ++/* ++ * Read a coord from the WM9712 adc in polling mode. ++ */ ++static int wm9712_poll_coord(struct wm97xx *wm, struct wm97xx_data *data) ++{ ++ int timeout = 5 * delay; ++ ++ if (!wm->pen_probably_down) { ++ u16 data_rd = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (!(data_rd & WM97XX_PEN_DOWN)) ++ return RC_PENUP; ++ wm->pen_probably_down = 1; ++ } ++ ++ /* set up digitiser */ ++ if (wm->mach_ops && wm->mach_ops->pre_sample) ++ wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y); ++ ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, ++ WM97XX_COO | WM97XX_POLL | WM97XX_DELAY(delay)); ++ ++ /* wait 3 AC97 time slots + delay for conversion and read x */ ++ poll_delay(delay); ++ data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ /* wait for POLL to go low */ ++ while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) ++ && timeout) { ++ udelay(AC97_LINK_FRAME); ++ timeout--; ++ } ++ ++ if (timeout <= 0) { ++ /* If PDEN is set, we can get a timeout when pen goes up */ ++ if (is_pden(wm)) ++ wm->pen_probably_down = 0; ++ else ++ dev_dbg(wm->dev, "adc sample timeout"); ++ return RC_PENUP; ++ } ++ ++ /* read back y data */ ++ data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (pil) ++ data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ else ++ data->p = DEFAULT_PRESSURE; ++ ++ if (wm->mach_ops && wm->mach_ops->post_sample) ++ wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y); ++ ++ /* check we have correct sample */ ++ if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y)) ++ goto err; ++ if (pil && !(data->p & WM97XX_ADCSEL_PRES)) ++ goto err; ++ ++ if (!(data->x & WM97XX_PEN_DOWN)) { ++ wm->pen_probably_down = 0; ++ return RC_PENUP; ++ } ++ return RC_VALID; ++err: ++ return RC_PENUP; ++} ++ ++/* ++ * Sample the WM9712 touchscreen in polling mode ++ */ ++static int wm9712_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) ++{ ++ int rc; ++ ++ if (coord) { ++ rc = wm9712_poll_coord(wm, data); ++ if (rc != RC_VALID) ++ return rc; ++ } else { ++ rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X, &data->x); ++ if (rc != RC_VALID) ++ return rc; ++ ++ rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y); ++ if (rc != RC_VALID) ++ return rc; ++ ++ if (pil && !five_wire) { ++ rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES, ++ &data->p); ++ if (rc != RC_VALID) ++ return rc; ++ } else ++ data->p = DEFAULT_PRESSURE; ++ } ++ return RC_VALID; ++} ++ ++/* ++ * Enable WM9712 continuous mode, i.e. touch data is streamed across ++ * an AC97 slot ++ */ ++static int wm9712_acc_enable(struct wm97xx *wm, int enable) ++{ ++ u16 dig1, dig2; ++ int ret = 0; ++ ++ dig1 = wm->dig[1]; ++ dig2 = wm->dig[2]; ++ ++ if (enable) { ++ /* continous mode */ ++ if (wm->mach_ops->acc_startup) { ++ ret = wm->mach_ops->acc_startup(wm); ++ if (ret < 0) ++ return ret; ++ } ++ dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK | ++ WM97XX_DELAY_MASK | WM97XX_SLT_MASK); ++ dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN | ++ WM97XX_DELAY(delay) | ++ WM97XX_SLT(wm->acc_slot) | ++ WM97XX_RATE(wm->acc_rate); ++ if (pil) ++ dig1 |= WM97XX_ADCSEL_PRES; ++ dig2 |= WM9712_PDEN; ++ } else { ++ dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN); ++ dig2 &= ~WM9712_PDEN; ++ if (wm->mach_ops->acc_shutdown) ++ wm->mach_ops->acc_shutdown(wm); ++ } ++ ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1); ++ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2); ++ return 0; ++} ++ ++struct wm97xx_codec_drv wm9712_codec = { ++ .id = WM9712_ID2, ++ .name = "wm9712", ++ .poll_sample = wm9712_poll_sample, ++ .poll_touch = wm9712_poll_touch, ++ .acc_enable = wm9712_acc_enable, ++ .phy_init = wm9712_phy_init, ++ .dig_enable = wm9712_dig_enable, ++ .dig_restore = wm9712_dig_restore, ++ .aux_prepare = wm9712_aux_prepare, ++}; ++EXPORT_SYMBOL_GPL(wm9712_codec); ++ ++/* Module information */ ++MODULE_AUTHOR("Liam Girdwood "); ++MODULE_DESCRIPTION("WM9712 Touch Screen Driver"); ++MODULE_LICENSE("GPL"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0033-Add-chip-driver-for-WM9713-touchscreen.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0033-Add-chip-driver-for-WM9713-touchscreen.patch new file mode 100644 index 0000000000..a9dfa18557 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0033-Add-chip-driver-for-WM9713-touchscreen.patch @@ -0,0 +1,490 @@ +From 05b2a361eedb5461e902c73ebc6e30f9916b3a8a Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Sat, 26 Jan 2008 21:14:19 +0300 +Subject: [PATCH 33/64] Add chip driver for WM9713 touchscreen + +Signed-off-by: Liam Girdwood +Signed-off-by: Graeme Gregory +Signed-off-by: Mike Arthur +Signed-off-by: Mark Brown +Cc: Dmitry Baryshkov +Cc: Stanley Cai +Cc: Rodolfo Giometti +Cc: Russell King +Cc: Marc Kleine-Budde +Cc: Ian Molton +Cc: Vince Sanders +Cc: Andrew Zabolotny +--- + drivers/input/touchscreen/wm9713.c | 459 ++++++++++++++++++++++++++++++++++++ + 1 files changed, 459 insertions(+), 0 deletions(-) + create mode 100644 drivers/input/touchscreen/wm9713.c + +diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c +new file mode 100644 +index 0000000..5067e59 +--- /dev/null ++++ b/drivers/input/touchscreen/wm9713.c +@@ -0,0 +1,459 @@ ++/* ++ * wm9713.c -- Codec touch driver for Wolfson WM9713 AC97 Codec. ++ * ++ * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC. ++ * Author: Liam Girdwood ++ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com ++ * Parts Copyright : Ian Molton ++ * Andrew Zabolotny ++ * Russell King ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define TS_NAME "wm97xx" ++#define WM9713_VERSION "0.53" ++#define DEFAULT_PRESSURE 0xb0c0 ++ ++/* ++ * Module parameters ++ */ ++ ++/* ++ * Set internal pull up for pen detect. ++ * ++ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive) ++ * i.e. pull up resistance = 64k Ohms / rpu. ++ * ++ * Adjust this value if you are having problems with pen detect not ++ * detecting any down event. ++ */ ++static int rpu = 8; ++module_param(rpu, int, 0); ++MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect."); ++ ++/* ++ * Set current used for pressure measurement. ++ * ++ * Set pil = 2 to use 400uA ++ * pil = 1 to use 200uA and ++ * pil = 0 to disable pressure measurement. ++ * ++ * This is used to increase the range of values returned by the adc ++ * when measureing touchpanel pressure. ++ */ ++static int pil; ++module_param(pil, int, 0); ++MODULE_PARM_DESC(pil, "Set current used for pressure measurement."); ++ ++/* ++ * Set threshold for pressure measurement. ++ * ++ * Pen down pressure below threshold is ignored. ++ */ ++static int pressure = DEFAULT_PRESSURE & 0xfff; ++module_param(pressure, int, 0); ++MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement."); ++ ++/* ++ * Set adc sample delay. ++ * ++ * For accurate touchpanel measurements, some settling time may be ++ * required between the switch matrix applying a voltage across the ++ * touchpanel plate and the ADC sampling the signal. ++ * ++ * This delay can be set by setting delay = n, where n is the array ++ * position of the delay in the array delay_table below. ++ * Long delays > 1ms are supported for completeness, but are not ++ * recommended. ++ */ ++static int delay = 4; ++module_param(delay, int, 0); ++MODULE_PARM_DESC(delay, "Set adc sample delay."); ++ ++/* ++ * Set adc mask function. ++ * ++ * Sources of glitch noise, such as signals driving an LCD display, may feed ++ * through to the touch screen plates and affect measurement accuracy. In ++ * order to minimise this, a signal may be applied to the MASK pin to delay or ++ * synchronise the sampling. ++ * ++ * 0 = No delay or sync ++ * 1 = High on pin stops conversions ++ * 2 = Edge triggered, edge on pin delays conversion by delay param (above) ++ * 3 = Edge triggered, edge on pin starts conversion after delay param ++ */ ++static int mask; ++module_param(mask, int, 0); ++MODULE_PARM_DESC(mask, "Set adc mask function."); ++ ++/* ++ * Coordinate Polling Enable. ++ * ++ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together ++ * for every poll. ++ */ ++static int coord; ++module_param(coord, int, 0); ++MODULE_PARM_DESC(coord, "Polling coordinate mode"); ++ ++/* ++ * ADC sample delay times in uS ++ */ ++static const int delay_table[] = { ++ 21, /* 1 AC97 Link frames */ ++ 42, /* 2 */ ++ 84, /* 4 */ ++ 167, /* 8 */ ++ 333, /* 16 */ ++ 667, /* 32 */ ++ 1000, /* 48 */ ++ 1333, /* 64 */ ++ 2000, /* 96 */ ++ 2667, /* 128 */ ++ 3333, /* 160 */ ++ 4000, /* 192 */ ++ 4667, /* 224 */ ++ 5333, /* 256 */ ++ 6000, /* 288 */ ++ 0 /* No delay, switch matrix always on */ ++}; ++ ++/* ++ * Delay after issuing a POLL command. ++ * ++ * The delay is 3 AC97 link frames + the touchpanel settling delay ++ */ ++static inline void poll_delay(int d) ++{ ++ udelay(3 * AC97_LINK_FRAME + delay_table[d]); ++} ++ ++/* ++ * set up the physical settings of the WM9713 ++ */ ++static void wm9713_phy_init(struct wm97xx *wm) ++{ ++ u16 dig1 = 0, dig2, dig3; ++ ++ /* default values */ ++ dig2 = WM97XX_DELAY(4) | WM97XX_SLT(5); ++ dig3 = WM9712_RPU(1); ++ ++ /* rpu */ ++ if (rpu) { ++ dig3 &= 0xffc0; ++ dig3 |= WM9712_RPU(rpu); ++ dev_info(wm->dev, "setting pen detect pull-up to %d Ohms\n", ++ 64000 / rpu); ++ } ++ ++ /* touchpanel pressure */ ++ if (pil == 2) { ++ dig3 |= WM9712_PIL; ++ dev_info(wm->dev, ++ "setting pressure measurement current to 400uA."); ++ } else if (pil) ++ dev_info(wm->dev, ++ "setting pressure measurement current to 200uA."); ++ if (!pil) ++ pressure = 0; ++ ++ /* sample settling delay */ ++ if (delay < 0 || delay > 15) { ++ dev_info(wm->dev, "supplied delay out of range."); ++ delay = 4; ++ dev_info(wm->dev, "setting adc sample delay to %d u Secs.", ++ delay_table[delay]); ++ } ++ dig2 &= 0xff0f; ++ dig2 |= WM97XX_DELAY(delay); ++ ++ /* mask */ ++ dig3 |= ((mask & 0x3) << 4); ++ if (coord) ++ dig3 |= WM9713_WAIT; ++ ++ wm->misc = wm97xx_reg_read(wm, 0x5a); ++ ++ wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3); ++ wm97xx_reg_write(wm, AC97_GPIO_STICKY, 0x0); ++} ++ ++static void wm9713_dig_enable(struct wm97xx *wm, int enable) ++{ ++ u16 val; ++ ++ if (enable) { ++ val = wm97xx_reg_read(wm, AC97_EXTENDED_MID); ++ wm97xx_reg_write(wm, AC97_EXTENDED_MID, val & 0x7fff); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] | ++ WM97XX_PRP_DET_DIG); ++ wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */ ++ } else { ++ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] & ++ ~WM97XX_PRP_DET_DIG); ++ val = wm97xx_reg_read(wm, AC97_EXTENDED_MID); ++ wm97xx_reg_write(wm, AC97_EXTENDED_MID, val | 0x8000); ++ } ++} ++ ++static void wm9713_dig_restore(struct wm97xx *wm) ++{ ++ wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig_save[0]); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig_save[1]); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig_save[2]); ++} ++ ++static void wm9713_aux_prepare(struct wm97xx *wm) ++{ ++ memcpy(wm->dig_save, wm->dig, sizeof(wm->dig)); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG1, 0); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG2, 0); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG3, WM97XX_PRP_DET_DIG); ++} ++ ++static inline int is_pden(struct wm97xx *wm) ++{ ++ return wm->dig[2] & WM9713_PDEN; ++} ++ ++/* ++ * Read a sample from the WM9713 adc in polling mode. ++ */ ++static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample) ++{ ++ u16 dig1; ++ int timeout = 5 * delay; ++ ++ if (!wm->pen_probably_down) { ++ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (!(data & WM97XX_PEN_DOWN)) ++ return RC_PENUP; ++ wm->pen_probably_down = 1; ++ } ++ ++ /* set up digitiser */ ++ if (adcsel & 0x8000) ++ adcsel = 1 << ((adcsel & 0x7fff) + 3); ++ ++ dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1); ++ dig1 &= ~WM9713_ADCSEL_MASK; ++ ++ if (wm->mach_ops && wm->mach_ops->pre_sample) ++ wm->mach_ops->pre_sample(adcsel); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | adcsel | WM9713_POLL); ++ ++ /* wait 3 AC97 time slots + delay for conversion */ ++ poll_delay(delay); ++ ++ /* wait for POLL to go low */ ++ while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) && ++ timeout) { ++ udelay(AC97_LINK_FRAME); ++ timeout--; ++ } ++ ++ if (timeout <= 0) { ++ /* If PDEN is set, we can get a timeout when pen goes up */ ++ if (is_pden(wm)) ++ wm->pen_probably_down = 0; ++ else ++ dev_dbg(wm->dev, "adc sample timeout"); ++ return RC_PENUP; ++ } ++ ++ *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (wm->mach_ops && wm->mach_ops->post_sample) ++ wm->mach_ops->post_sample(adcsel); ++ ++ /* check we have correct sample */ ++ if ((*sample & WM97XX_ADCSRC_MASK) != ffs(adcsel >> 1) << 12) { ++ dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel, ++ *sample & WM97XX_ADCSRC_MASK); ++ return RC_PENUP; ++ } ++ ++ if (!(*sample & WM97XX_PEN_DOWN)) { ++ wm->pen_probably_down = 0; ++ return RC_PENUP; ++ } ++ ++ return RC_VALID; ++} ++ ++/* ++ * Read a coordinate from the WM9713 adc in polling mode. ++ */ ++static int wm9713_poll_coord(struct wm97xx *wm, struct wm97xx_data *data) ++{ ++ u16 dig1; ++ int timeout = 5 * delay; ++ ++ if (!wm->pen_probably_down) { ++ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (!(data & WM97XX_PEN_DOWN)) ++ return RC_PENUP; ++ wm->pen_probably_down = 1; ++ } ++ ++ /* set up digitiser */ ++ dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1); ++ dig1 &= ~WM9713_ADCSEL_MASK; ++ if (pil) ++ dig1 |= WM97XX_ADCSEL_PRES; ++ ++ if (wm->mach_ops && wm->mach_ops->pre_sample) ++ wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG1, ++ dig1 | WM9713_POLL | WM9713_COO); ++ ++ /* wait 3 AC97 time slots + delay for conversion */ ++ poll_delay(delay); ++ data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ /* wait for POLL to go low */ ++ while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) ++ && timeout) { ++ udelay(AC97_LINK_FRAME); ++ timeout--; ++ } ++ ++ if (timeout <= 0) { ++ /* If PDEN is set, we can get a timeout when pen goes up */ ++ if (is_pden(wm)) ++ wm->pen_probably_down = 0; ++ else ++ dev_dbg(wm->dev, "adc sample timeout"); ++ return RC_PENUP; ++ } ++ ++ /* read back data */ ++ data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ if (pil) ++ data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); ++ else ++ data->p = DEFAULT_PRESSURE; ++ ++ if (wm->mach_ops && wm->mach_ops->post_sample) ++ wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y); ++ ++ /* check we have correct sample */ ++ if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y)) ++ goto err; ++ if (pil && !(data->p & WM97XX_ADCSEL_PRES)) ++ goto err; ++ ++ if (!(data->x & WM97XX_PEN_DOWN)) { ++ wm->pen_probably_down = 0; ++ return RC_PENUP; ++ } ++ return RC_VALID; ++err: ++ return RC_PENUP; ++} ++ ++/* ++ * Sample the WM9713 touchscreen in polling mode ++ */ ++static int wm9713_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) ++{ ++ int rc; ++ ++ if (coord) { ++ rc = wm9713_poll_coord(wm, data); ++ if (rc != RC_VALID) ++ return rc; ++ } else { ++ rc = wm9713_poll_sample(wm, WM9713_ADCSEL_X, &data->x); ++ if (rc != RC_VALID) ++ return rc; ++ rc = wm9713_poll_sample(wm, WM9713_ADCSEL_Y, &data->y); ++ if (rc != RC_VALID) ++ return rc; ++ if (pil) { ++ rc = wm9713_poll_sample(wm, WM9713_ADCSEL_PRES, ++ &data->p); ++ if (rc != RC_VALID) ++ return rc; ++ } else ++ data->p = DEFAULT_PRESSURE; ++ } ++ return RC_VALID; ++} ++ ++/* ++ * Enable WM9713 continuous mode, i.e. touch data is streamed across ++ * an AC97 slot ++ */ ++static int wm9713_acc_enable(struct wm97xx *wm, int enable) ++{ ++ u16 dig1, dig2, dig3; ++ int ret = 0; ++ ++ dig1 = wm->dig[0]; ++ dig2 = wm->dig[1]; ++ dig3 = wm->dig[2]; ++ ++ if (enable) { ++ /* continous mode */ ++ if (wm->mach_ops->acc_startup && ++ (ret = wm->mach_ops->acc_startup(wm)) < 0) ++ return ret; ++ ++ dig1 &= ~WM9713_ADCSEL_MASK; ++ dig1 |= WM9713_CTC | WM9713_COO | WM9713_ADCSEL_X | ++ WM9713_ADCSEL_Y; ++ if (pil) ++ dig1 |= WM9713_ADCSEL_PRES; ++ dig2 &= ~(WM97XX_DELAY_MASK | WM97XX_SLT_MASK | ++ WM97XX_CM_RATE_MASK); ++ dig2 |= WM97XX_SLEN | WM97XX_DELAY(delay) | ++ WM97XX_SLT(wm->acc_slot) | WM97XX_RATE(wm->acc_rate); ++ dig3 |= WM9713_PDEN; ++ } else { ++ dig1 &= ~(WM9713_CTC | WM9713_COO); ++ dig2 &= ~WM97XX_SLEN; ++ dig3 &= ~WM9713_PDEN; ++ if (wm->mach_ops->acc_shutdown) ++ wm->mach_ops->acc_shutdown(wm); ++ } ++ ++ wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2); ++ wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3); ++ return ret; ++} ++ ++struct wm97xx_codec_drv wm9713_codec = { ++ .id = WM9713_ID2, ++ .name = "wm9713", ++ .poll_sample = wm9713_poll_sample, ++ .poll_touch = wm9713_poll_touch, ++ .acc_enable = wm9713_acc_enable, ++ .phy_init = wm9713_phy_init, ++ .dig_enable = wm9713_dig_enable, ++ .dig_restore = wm9713_dig_restore, ++ .aux_prepare = wm9713_aux_prepare, ++}; ++EXPORT_SYMBOL_GPL(wm9713_codec); ++ ++/* Module information */ ++MODULE_AUTHOR("Liam Girdwood "); ++MODULE_DESCRIPTION("WM9713 Touch Screen Driver"); ++MODULE_LICENSE("GPL"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0034-Driver-for-WM97xx-touchscreens-in-streaming-mode-on.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0034-Driver-for-WM97xx-touchscreens-in-streaming-mode-on.patch new file mode 100644 index 0000000000..0391cfcd83 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0034-Driver-for-WM97xx-touchscreens-in-streaming-mode-on.patch @@ -0,0 +1,329 @@ +From 821604bad5ce1ef942eeb420afd9ea2c5c92875e Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Sat, 26 Jan 2008 21:14:19 +0300 +Subject: [PATCH 34/64] Driver for WM97xx touchscreens in streaming mode on Mainstone + +Signed-off-by: Liam Girdwood +Signed-off-by: Graeme Gregory +Signed-off-by: Mike Arthur +Signed-off-by: Mark Brown +Cc: Dmitry Baryshkov +Cc: Stanley Cai +Cc: Rodolfo Giometti +Cc: Russell King +Cc: Marc Kleine-Budde +Cc: Ian Molton +Cc: Vince Sanders +Cc: Andrew Zabolotny +--- + drivers/input/touchscreen/mainstone-wm97xx.c | 298 ++++++++++++++++++++++++++ + 1 files changed, 298 insertions(+), 0 deletions(-) + create mode 100644 drivers/input/touchscreen/mainstone-wm97xx.c + +diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c +new file mode 100644 +index 0000000..8e1c35d +--- /dev/null ++++ b/drivers/input/touchscreen/mainstone-wm97xx.c +@@ -0,0 +1,298 @@ ++/* ++ * mainstone-wm97xx.c -- Mainstone Continuous Touch screen driver for ++ * Wolfson WM97xx AC97 Codecs. ++ * ++ * Copyright 2004, 2007 Wolfson Microelectronics PLC. ++ * Author: Liam Girdwood ++ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com ++ * Parts Copyright : Ian Molton ++ * Andrew Zabolotny ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * Notes: ++ * This is a wm97xx extended touch driver to capture touch ++ * data in a continuous manner on the Intel XScale archictecture ++ * ++ * Features: ++ * - codecs supported:- WM9705, WM9712, WM9713 ++ * - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define VERSION "0.13" ++ ++struct continuous { ++ u16 id; /* codec id */ ++ u8 code; /* continuous code */ ++ u8 reads; /* number of coord reads per read cycle */ ++ u32 speed; /* number of coords per second */ ++}; ++ ++#define WM_READS(sp) ((sp / HZ) + 1) ++ ++static const struct continuous cinfo[] = { ++ {WM9705_ID2, 0, WM_READS(94), 94}, ++ {WM9705_ID2, 1, WM_READS(188), 188}, ++ {WM9705_ID2, 2, WM_READS(375), 375}, ++ {WM9705_ID2, 3, WM_READS(750), 750}, ++ {WM9712_ID2, 0, WM_READS(94), 94}, ++ {WM9712_ID2, 1, WM_READS(188), 188}, ++ {WM9712_ID2, 2, WM_READS(375), 375}, ++ {WM9712_ID2, 3, WM_READS(750), 750}, ++ {WM9713_ID2, 0, WM_READS(94), 94}, ++ {WM9713_ID2, 1, WM_READS(120), 120}, ++ {WM9713_ID2, 2, WM_READS(154), 154}, ++ {WM9713_ID2, 3, WM_READS(188), 188}, ++}; ++ ++/* continuous speed index */ ++static int sp_idx; ++static u16 last, tries; ++ ++/* ++ * Pen sampling frequency (Hz) in continuous mode. ++ */ ++static int cont_rate = 200; ++module_param(cont_rate, int, 0); ++MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)"); ++ ++/* ++ * Pen down detection. ++ * ++ * This driver can either poll or use an interrupt to indicate a pen down ++ * event. If the irq request fails then it will fall back to polling mode. ++ */ ++static int pen_int; ++module_param(pen_int, int, 0); ++MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)"); ++ ++/* ++ * Pressure readback. ++ * ++ * Set to 1 to read back pen down pressure ++ */ ++static int pressure; ++module_param(pressure, int, 0); ++MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)"); ++ ++/* ++ * AC97 touch data slot. ++ * ++ * Touch screen readback data ac97 slot ++ */ ++static int ac97_touch_slot = 5; ++module_param(ac97_touch_slot, int, 0); ++MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number"); ++ ++ ++/* flush AC97 slot 5 FIFO on pxa machines */ ++#ifdef CONFIG_PXA27x ++static void wm97xx_acc_pen_up(struct wm97xx *wm) ++{ ++ set_current_state(TASK_INTERRUPTIBLE); ++ schedule_timeout(1); ++ ++ while (MISR & (1 << 2)) ++ MODR; ++} ++#else ++static void wm97xx_acc_pen_up(struct wm97xx *wm) ++{ ++ int count = 16; ++ set_current_state(TASK_INTERRUPTIBLE); ++ schedule_timeout(1); ++ ++ while (count < 16) { ++ MODR; ++ count--; ++ } ++} ++#endif ++ ++static int wm97xx_acc_pen_down(struct wm97xx *wm) ++{ ++ u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES; ++ int reads = 0; ++ ++ /* data is never immediately available after pen down irq */ ++ set_current_state(TASK_INTERRUPTIBLE); ++ schedule_timeout(1); ++ ++ if (tries > 5) { ++ tries = 0; ++ return RC_PENUP; ++ } ++ ++ x = MODR; ++ if (x == last) { ++ tries++; ++ return RC_AGAIN; ++ } ++ last = x; ++ do { ++ if (reads) ++ x = MODR; ++ y = MODR; ++ if (pressure) ++ p = MODR; ++ ++ /* are samples valid */ ++ if ((x & 0x7000) != WM97XX_ADCSEL_X || ++ (y & 0x7000) != WM97XX_ADCSEL_Y || ++ (p & 0x7000) != WM97XX_ADCSEL_PRES) ++ goto up; ++ ++ /* coordinate is good */ ++ tries = 0; ++ input_report_abs(wm->input_dev, ABS_X, x & 0xfff); ++ input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); ++ input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); ++ input_sync(wm->input_dev); ++ reads++; ++ } while (reads < cinfo[sp_idx].reads); ++up: ++ return RC_PENDOWN | RC_AGAIN; ++} ++ ++static int wm97xx_acc_startup(struct wm97xx *wm) ++{ ++ int idx = 0; ++ ++ /* check we have a codec */ ++ if (wm->ac97 == NULL) ++ return -ENODEV; ++ ++ /* Go you big red fire engine */ ++ for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) { ++ if (wm->id != cinfo[idx].id) ++ continue; ++ sp_idx = idx; ++ if (cont_rate <= cinfo[idx].speed) ++ break; ++ } ++ wm->acc_rate = cinfo[sp_idx].code; ++ wm->acc_slot = ac97_touch_slot; ++ dev_info(wm->dev, ++ "mainstone accelerated touchscreen driver, %d samples/sec\n", ++ cinfo[sp_idx].speed); ++ ++ /* codec specific irq config */ ++ if (pen_int) { ++ switch (wm->id) { ++ case WM9705_ID2: ++ wm->pen_irq = IRQ_GPIO(4); ++ set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE); ++ break; ++ case WM9712_ID2: ++ case WM9713_ID2: ++ /* enable pen down interrupt */ ++ /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */ ++ wm->pen_irq = MAINSTONE_AC97_IRQ; ++ wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, ++ WM97XX_GPIO_POL_HIGH, ++ WM97XX_GPIO_STICKY, ++ WM97XX_GPIO_WAKE); ++ wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT, ++ WM97XX_GPIO_POL_HIGH, ++ WM97XX_GPIO_NOTSTICKY, ++ WM97XX_GPIO_NOWAKE); ++ break; ++ default: ++ dev_err(wm->dev, ++ "pen down irq not supported on this device\n"); ++ pen_int = 0; ++ break; ++ } ++ } ++ ++ return 0; ++} ++ ++static void wm97xx_acc_shutdown(struct wm97xx *wm) ++{ ++ /* codec specific deconfig */ ++ if (pen_int) { ++ switch (wm->id & 0xffff) { ++ case WM9705_ID2: ++ wm->pen_irq = 0; ++ break; ++ case WM9712_ID2: ++ case WM9713_ID2: ++ /* disable interrupt */ ++ wm->pen_irq = 0; ++ break; ++ } ++ } ++} ++ ++static void wm97xx_irq_enable(struct wm97xx *wm, int enable) ++{ ++ if (enable) ++ enable_irq(wm->pen_irq); ++ else ++ disable_irq(wm->pen_irq); ++} ++ ++static struct wm97xx_mach_ops mainstone_mach_ops = { ++ .acc_enabled = 1, ++ .acc_pen_up = wm97xx_acc_pen_up, ++ .acc_pen_down = wm97xx_acc_pen_down, ++ .acc_startup = wm97xx_acc_startup, ++ .acc_shutdown = wm97xx_acc_shutdown, ++ .irq_enable = wm97xx_irq_enable, ++}; ++ ++static int mainstone_wm97xx_probe(struct platform_device *pdev) ++{ ++ struct wm97xx *wm = platform_get_drvdata(pdev); ++ return wm97xx_register_mach_ops(wm, &mainstone_mach_ops); ++} ++ ++static int mainstone_wm97xx_remove(struct platform_device *pdev) ++{ ++ struct wm97xx *wm = platform_get_drvdata(pdev); ++ wm97xx_unregister_mach_ops(wm); ++ return 0; ++} ++ ++static struct platform_driver mainstone_wm97xx_driver = { ++ .probe = mainstone_wm97xx_probe, ++ .remove = mainstone_wm97xx_remove, ++ .driver = { ++ .name = "wm97xx-touch", ++ }, ++}; ++ ++static int __init mainstone_wm97xx_init(void) ++{ ++ return platform_driver_register(&mainstone_wm97xx_driver); ++} ++ ++static void __exit mainstone_wm97xx_exit(void) ++{ ++ platform_driver_unregister(&mainstone_wm97xx_driver); ++} ++ ++module_init(mainstone_wm97xx_init); ++module_exit(mainstone_wm97xx_exit); ++ ++/* Module information */ ++MODULE_AUTHOR("Liam Girdwood "); ++MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone"); ++MODULE_LICENSE("GPL"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0035-Build-system-and-MAINTAINERS-entry-for-WM97xx-touchs.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0035-Build-system-and-MAINTAINERS-entry-for-WM97xx-touchs.patch new file mode 100644 index 0000000000..aa0918f43e --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0035-Build-system-and-MAINTAINERS-entry-for-WM97xx-touchs.patch @@ -0,0 +1,122 @@ +From eba6a504393932764a33aae64021827dd2c5c70c Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Sat, 26 Jan 2008 21:14:18 +0300 +Subject: [PATCH 35/64] Build system and MAINTAINERS entry for WM97xx touchscreen drivers + +Signed-off-by: Mark Brown +Signed-off-by: Liam Girdwood +--- + MAINTAINERS | 10 +++++++ + drivers/input/touchscreen/Kconfig | 52 ++++++++++++++++++++++++++++++++++++ + drivers/input/touchscreen/Makefile | 7 +++++ + 3 files changed, 69 insertions(+), 0 deletions(-) + +diff --git a/MAINTAINERS b/MAINTAINERS +index 2340cfb..f02851c 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -4204,6 +4204,16 @@ L: linux-wireless@vger.kernel.org + W: http://oops.ghostprotocols.net:81/blog + S: Maintained + ++WM97XX TOUCHSCREEN DRIVERS ++P: Mark Brown ++M: broonie@opensource.wolfsonmicro.com ++P: Liam Girdwood ++M: liam.girdwood@wolfsonmicro.com ++L: linux-input@vger.kernel.org ++T: git git://opensource.wolfsonmicro.com/linux-2.6-touch ++W: http://opensource.wolfsonmicro.com/node/7 ++S: Supported ++ + X.25 NETWORK LAYER + P: Henner Eisen + M: eis@baty.hanse.de +diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig +index 90e8e92..0be05a2 100644 +--- a/drivers/input/touchscreen/Kconfig ++++ b/drivers/input/touchscreen/Kconfig +@@ -158,6 +158,58 @@ config TOUCHSCREEN_TOUCHRIGHT + To compile this driver as a module, choose M here: the + module will be called touchright. + ++config TOUCHSCREEN_WM97XX ++ tristate "Support for WM97xx AC97 touchscreen controllers" ++ depends on AC97_BUS ++ ++config TOUCHSCREEN_WM9705 ++ bool "WM9705 Touchscreen interface support" ++ depends on TOUCHSCREEN_WM97XX ++ help ++ Say Y here if you have a Wolfson Microelectronics WM9705 touchscreen ++ controller connected to your system. ++ ++ If unsure, say N. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called wm9705. ++ ++config TOUCHSCREEN_WM9712 ++ bool "WM9712 Touchscreen interface support" ++ depends on TOUCHSCREEN_WM97XX ++ help ++ Say Y here if you have a Wolfson Microelectronics WM9712 touchscreen ++ controller connected to your system. ++ ++ If unsure, say N. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called wm9712. ++ ++config TOUCHSCREEN_WM9713 ++ bool "WM9713 Touchscreen interface support" ++ depends on TOUCHSCREEN_WM97XX ++ help ++ Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen ++ controller connected to your system. ++ ++ If unsure, say N. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called wm9713. ++ ++config TOUCHSCREEN_WM97XX_MAINSTONE ++ tristate "WM97xx Mainstone accelerated touch" ++ depends on TOUCHSCREEN_WM97XX && ARCH_PXA ++ help ++ Say Y here for support for streaming mode with WM97xx touchscreens ++ on Mainstone systems. ++ ++ If unsure, say N ++ ++ To compile this driver as a module, choose M here: the ++ module will be called mainstone-wm97xx ++ + config TOUCHSCREEN_TOUCHWIN + tristate "Touchwin serial touchscreen" + select SERIO +diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile +index 35d4097..d38156e 100644 +--- a/drivers/input/touchscreen/Makefile ++++ b/drivers/input/touchscreen/Makefile +@@ -4,6 +4,8 @@ + + # Each configuration option enables a list of files. + ++wm97xx-ts-y := wm97xx-core.o ++ + obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o + obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o + obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o +@@ -19,3 +21,8 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o + obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o + obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o + obj-$(CONFIG_TOUCHSCREEN_TSC2101) += tsc2101_ts.o ++obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o ++obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o ++wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o ++wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o ++wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0036-Set-id-to-1-for-wm97xx-subdevices.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0036-Set-id-to-1-for-wm97xx-subdevices.patch new file mode 100644 index 0000000000..dd10b34586 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0036-Set-id-to-1-for-wm97xx-subdevices.patch @@ -0,0 +1,35 @@ +From 9ea478cbd5473f52ca036cccc00dddad717d7861 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 30 Jan 2008 19:27:13 +0300 +Subject: [PATCH 36/64] Set id to -1 for wm97xx subdevices + +Signed-off-by: Dmitry Baryshkov +--- + drivers/input/touchscreen/wm97xx-core.c | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c +index 27a0a99..e066acc 100644 +--- a/drivers/input/touchscreen/wm97xx-core.c ++++ b/drivers/input/touchscreen/wm97xx-core.c +@@ -592,7 +592,7 @@ static int wm97xx_probe(struct device *dev) + wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); + + /* register our battery device */ +- wm->battery_dev = platform_device_alloc("wm97xx-battery", 0); ++ wm->battery_dev = platform_device_alloc("wm97xx-battery", -1); + if (!wm->battery_dev) + goto batt_err; + platform_set_drvdata(wm->battery_dev, wm); +@@ -603,7 +603,7 @@ static int wm97xx_probe(struct device *dev) + + /* register our extended touch device (for machine specific + * extensions) */ +- wm->touch_dev = platform_device_alloc("wm97xx-touch", 0); ++ wm->touch_dev = platform_device_alloc("wm97xx-touch", -1); + if (!wm->touch_dev) + goto touch_err; + platform_set_drvdata(wm->touch_dev, wm); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0037-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0037-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch new file mode 100644 index 0000000000..010194dd96 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0037-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch @@ -0,0 +1,41 @@ +From d2888c7643b07687b14a839239cbe7fc5bf565e6 Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Mon, 14 Jan 2008 23:24:26 +0300 +Subject: [PATCH 37/64] Don't lock the codec list in snd_soc_dapm_new_widgets() + +snd_soc_dapm_new_widgets() takes the codec lock when adding new widgets, +causing lockdep warnings when applications later call down through ALSA +to adjust controls. Since widgets are only added during probe this lock +should be unneeded so don't take it. + +Thanks to Dmitry Baryshkov for reporting this issue. + +Signed-off-by: Mark Brown +Cc: Dmitry Baryshkov +--- + sound/soc/soc-dapm.c | 2 -- + 1 files changed, 0 insertions(+), 2 deletions(-) + +diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c +index 29a546f..e46cdc5 100644 +--- a/sound/soc/soc-dapm.c ++++ b/sound/soc/soc-dapm.c +@@ -963,7 +963,6 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec) + { + struct snd_soc_dapm_widget *w; + +- mutex_lock(&codec->mutex); + list_for_each_entry(w, &codec->dapm_widgets, list) + { + if (w->new) +@@ -998,7 +997,6 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec) + } + + dapm_power_widgets(codec, SND_SOC_DAPM_STREAM_NOP); +- mutex_unlock(&codec->mutex); + return 0; + } + EXPORT_SYMBOL_GPL(snd_soc_dapm_new_widgets); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0038-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0038-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch new file mode 100644 index 0000000000..7a3eb61a27 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0038-Don-t-lock-the-codec-list-in-snd_soc_dapm_new_widget.patch @@ -0,0 +1,57 @@ +From 5bae1fab16c7b14a458aa90e5654fe3a1d8d960f Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Sun, 20 Jan 2008 00:06:06 +0300 +Subject: [PATCH 38/64] Don't lock the codec list in snd_soc_dapm_new_widgets() + +On Wed, Jan 16, 2008 at 02:40:55AM +0300, Dmitry wrote: + +> I'm sorry, but I tested this patch only now. And I just got another +> message from lockdep: + +Could you give this patch a try, please? +--- + sound/soc/soc-core.c | 7 +++++-- + 1 files changed, 5 insertions(+), 2 deletions(-) + +diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c +index e6a67b5..7f3ed9f 100644 +--- a/sound/soc/soc-core.c ++++ b/sound/soc/soc-core.c +@@ -1090,7 +1090,6 @@ int snd_soc_register_card(struct snd_soc_device *socdev) + struct snd_soc_machine *machine = socdev->machine; + int ret = 0, i, ac97 = 0, err = 0; + +- mutex_lock(&codec->mutex); + for(i = 0; i < machine->num_links; i++) { + if (socdev->machine->dai_link[i].init) { + err = socdev->machine->dai_link[i].init(codec); +@@ -1116,12 +1115,14 @@ int snd_soc_register_card(struct snd_soc_device *socdev) + goto out; + } + ++ mutex_lock(&codec->mutex); + #ifdef CONFIG_SND_SOC_AC97_BUS + if (ac97) { + ret = soc_ac97_dev_register(codec); + if (ret < 0) { + printk(KERN_ERR "asoc: AC97 device register failed\n"); + snd_card_free(codec->card); ++ mutex_unlock(&codec->mutex); + goto out; + } + } +@@ -1134,8 +1135,10 @@ int snd_soc_register_card(struct snd_soc_device *socdev) + err = device_create_file(socdev->dev, &dev_attr_codec_reg); + if (err < 0) + printk(KERN_WARNING "asoc: failed to add codec sysfs entries\n"); +-out: ++ + mutex_unlock(&codec->mutex); ++ ++out: + return ret; + } + EXPORT_SYMBOL_GPL(snd_soc_register_card); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0039-Add-generic-framework-for-managing-clocks.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0039-Add-generic-framework-for-managing-clocks.patch new file mode 100644 index 0000000000..c09c208c6a --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0039-Add-generic-framework-for-managing-clocks.patch @@ -0,0 +1,446 @@ +From 62c9a23cfa7181369637d0b61a8e90c83c562f03 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Mon, 4 Feb 2008 03:01:06 +0300 +Subject: [PATCH 39/64] Add generic framework for managing clocks. + +Provide a generic framework that platform may choose +to support clocks api. In particular this provides +platform-independant struct clk definition, a full +implementation of clocks api and a set of functions +for registering and unregistering clocks in a safe way. + +Signed-off-by: Dmitry Baryshkov +--- + include/linux/clklib.h | 85 ++++++++++++++ + init/Kconfig | 7 + + kernel/Makefile | 1 + + kernel/clklib.c | 295 ++++++++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 388 insertions(+), 0 deletions(-) + create mode 100644 include/linux/clklib.h + create mode 100644 kernel/clklib.c + +diff --git a/include/linux/clklib.h b/include/linux/clklib.h +new file mode 100644 +index 0000000..4bd9b4a +--- /dev/null ++++ b/include/linux/clklib.h +@@ -0,0 +1,85 @@ ++/* ++ * Copyright (C) 2008 Dmitry Baryshkov ++ * ++ * This file is released under the GPL v2. ++ */ ++ ++#ifndef CLKLIB_H ++#define CLKLIB_H ++ ++#include ++ ++struct clk { ++ struct list_head node; ++ struct clk *parent; ++ ++ const char *name; ++ struct module *owner; ++ ++ int users; ++ unsigned long rate; ++ int delay; ++ ++ int (*can_get) (struct clk *, struct device *); ++ int (*set_parent) (struct clk *, struct clk *); ++ int (*enable) (struct clk *); ++ void (*disable) (struct clk *); ++ unsigned long (*getrate) (struct clk*); ++ int (*setrate) (struct clk *, unsigned long); ++ long (*roundrate) (struct clk *, unsigned long); ++ ++ void *priv; ++}; ++ ++int clk_register(struct clk *clk); ++void clk_unregister(struct clk *clk); ++static void __maybe_unused clks_register(struct clk *clks, size_t num) ++{ ++ int i; ++ for (i = 0; i < num; i++) { ++ clk_register(&clks[i]); ++ } ++} ++ ++ ++int clk_alloc_function(const char *parent, struct clk *clk); ++ ++struct clk_function { ++ const char *parent; ++ struct clk *clk; ++}; ++ ++#define CLK_FUNC(_clock, _function, _can_get, _data, _format) \ ++ { \ ++ .parent = _clock, \ ++ .clk = &(struct clk) { \ ++ .name= _function, \ ++ .owner = THIS_MODULE, \ ++ .can_get = _can_get, \ ++ .priv = _data, \ ++ .format = _format, \ ++ }, \ ++ } ++ ++static int __maybe_unused clk_alloc_functions( ++ struct clk_function *funcs, ++ int num) ++{ ++ int i; ++ int rc; ++ ++ for (i = 0; i < num; i++) { ++ rc = clk_alloc_function(funcs[i].parent, funcs[i].clk); ++ ++ if (rc) { ++ printk(KERN_ERR "Error allocating %s.%s function.\n", ++ funcs[i].parent, ++ funcs[i].clk->name); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++#endif +diff --git a/init/Kconfig b/init/Kconfig +index b9d11a8..05b62ba 100644 +--- a/init/Kconfig ++++ b/init/Kconfig +@@ -435,6 +435,13 @@ config CC_OPTIMIZE_FOR_SIZE + config SYSCTL + bool + ++config HAVE_CLOCK_LIB ++ bool ++ help ++ Platforms select clocklib if they use this infrastructure ++ for managing their clocks both built into SoC and provided ++ by external devices. ++ + menuconfig EMBEDDED + bool "Configure standard kernel features (for small systems)" + help +diff --git a/kernel/Makefile b/kernel/Makefile +index 6d9a87c..0b2ade7 100644 +--- a/kernel/Makefile ++++ b/kernel/Makefile +@@ -58,6 +58,7 @@ obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o + obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o + obj-$(CONFIG_MARKERS) += marker.o + obj-$(CONFIG_LATENCYTOP) += latencytop.o ++obj-$(CONFIG_HAVE_CLOCK_LIB) += clklib.o + + ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y) + # According to Alan Modra , the -fno-omit-frame-pointer is +diff --git a/kernel/clklib.c b/kernel/clklib.c +new file mode 100644 +index 0000000..203af3d +--- /dev/null ++++ b/kernel/clklib.c +@@ -0,0 +1,295 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static LIST_HEAD(clocks); ++static DEFINE_SPINLOCK(clocks_lock); ++ ++static int __clk_register(struct clk *clk) ++{ ++ if (clk->parent && ++ !try_module_get(clk->parent->owner)) ++ return -EINVAL; ++ ++ list_add_tail(&clk->node, &clocks); ++ ++ return 0; ++} ++ ++int clk_register(struct clk *clk) ++{ ++ unsigned long flags; ++ int rc; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ rc = __clk_register(clk); ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return rc; ++} ++EXPORT_SYMBOL(clk_register); ++ ++void clk_unregister(struct clk *clk) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ list_del(&clk->node); ++ if (clk->parent) ++ module_put(clk->parent->owner); ++ spin_unlock_irqrestore(&clocks_lock, flags); ++} ++EXPORT_SYMBOL(clk_unregister); ++ ++struct clk *clk_get(struct device *dev, const char *id) ++{ ++ struct clk *p, *clk = ERR_PTR(-ENOENT); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ list_for_each_entry(p, &clocks, node) { ++ if (strcmp(id, p->name) == 0 && ++ (!p->can_get || p->can_get(p, dev)) && ++ try_module_get(p->owner)) { ++ clk = p; ++ break; ++ } ++ } ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return clk; ++} ++EXPORT_SYMBOL(clk_get); ++ ++void clk_put(struct clk *clk) ++{ ++ unsigned long flags; ++ ++ if (!clk || IS_ERR(clk)) ++ return; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ module_put(clk->owner); ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++} ++EXPORT_SYMBOL(clk_put); ++ ++int clk_set_parent(struct clk *clk, struct clk *parent) ++{ ++ int rc; ++ unsigned long flags; ++ ++ if (!clk || IS_ERR(clk)) ++ return -EINVAL; ++ ++ if (!clk->set_parent) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ rc = clk->set_parent(clk, parent); ++ if (!rc) ++ clk->parent = parent; ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return rc; ++} ++EXPORT_SYMBOL(clk_set_parent); ++ ++static int __clk_enable(struct clk *clk) ++{ ++ int rc = 0; ++ ++ if (clk->parent) { ++ rc = __clk_enable(clk->parent); ++ ++ if (rc) ++ return rc; ++ } ++ ++ if (clk->users++ == 0) ++ if (clk->enable) ++ rc = clk->enable(clk); ++ ++ if (clk->delay) ++ udelay(clk->delay); ++ ++ return rc; ++} ++ ++int clk_enable(struct clk *clk) ++{ ++ unsigned long flags; ++ int rc; ++ ++ if (!clk || IS_ERR(clk)) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ rc = __clk_enable(clk); ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return rc; ++} ++EXPORT_SYMBOL(clk_enable); ++ ++static void __clk_disable(struct clk *clk) ++{ ++ if (clk->users <= 0) { ++ WARN_ON(1); ++ return; ++ } ++ ++ if (--clk->users == 0) ++ if (clk->disable) ++ clk->disable(clk); ++ ++ if (clk->parent) ++ __clk_disable(clk->parent); ++} ++ ++void clk_disable(struct clk *clk) ++{ ++ unsigned long flags; ++ ++ if (!clk || IS_ERR(clk)) ++ return; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ __clk_disable(clk); ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++} ++EXPORT_SYMBOL(clk_disable); ++ ++static unsigned long __clk_get_rate(struct clk *clk) ++{ ++ unsigned long rate = 0; ++ ++ for (;;) { ++ if (rate || !clk) ++ return rate; ++ ++ if (clk->getrate) ++ rate = clk->getrate(clk); ++ else if (clk->rate) ++ rate = clk->rate; ++ else ++ clk = clk->parent; ++ } ++} ++ ++unsigned long clk_get_rate(struct clk *clk) ++{ ++ unsigned long rate = 0; ++ unsigned long flags; ++ ++ if (!clk || IS_ERR(clk)) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ rate = __clk_get_rate(clk); ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return rate; ++} ++EXPORT_SYMBOL(clk_get_rate); ++ ++long clk_round_rate(struct clk *clk, unsigned long rate) ++{ ++ long res; ++ unsigned long flags; ++ ++ if (!clk || IS_ERR(clk)) ++ return -EINVAL; ++ ++ if (!clk->roundrate) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ res = clk->roundrate(clk, rate); ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return res; ++} ++EXPORT_SYMBOL(clk_round_rate); ++ ++int clk_set_rate(struct clk *clk, unsigned long rate) ++{ ++ int rc; ++ unsigned long flags; ++ ++ if (!clk || IS_ERR(clk)) ++ return -EINVAL; ++ ++ if (!clk->setrate) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ rc = clk->setrate(clk, rate); ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return rc; ++} ++EXPORT_SYMBOL(clk_set_rate); ++ ++int clk_alloc_function(const char *parent, struct clk *clk) ++{ ++ int rc = 0; ++ unsigned long flags; ++ struct clk *pclk; ++ bool found = false; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ list_for_each_entry(pclk, &clocks, node) { ++ if (strcmp(parent, pclk->name) == 0 && ++ try_module_get(pclk->owner)) { ++ found = true; ++ break; ++ } ++ } ++ ++ if (!found) { ++ rc = -ENODEV; ++ goto out; ++ } ++ ++ clk->parent = pclk; ++ ++ __clk_register(clk); ++ /* ++ * We locked parent owner during search ++ * and also in __clk_register. Free one reference ++ */ ++ module_put(pclk->owner); ++ ++out: ++ if (rc) { ++ kfree(clk); ++ } ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return rc; ++} ++EXPORT_SYMBOL(clk_alloc_function); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0040-Clocklib-debugfs-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0040-Clocklib-debugfs-support.patch new file mode 100644 index 0000000000..160b274f4f --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0040-Clocklib-debugfs-support.patch @@ -0,0 +1,108 @@ +From cae12d96586dac77d223559d686487ea2d457a41 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Mon, 4 Feb 2008 03:01:05 +0300 +Subject: [PATCH 40/64] Clocklib debugfs support + +Provide /sys/kernel/debug/clock to ease debugging. + +Signed-off-by: Dmitry Baryshkov +--- + include/linux/clklib.h | 5 +++ + kernel/clklib.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 73 insertions(+), 0 deletions(-) + +diff --git a/include/linux/clklib.h b/include/linux/clklib.h +index 4bd9b4a..f916693 100644 +--- a/include/linux/clklib.h ++++ b/include/linux/clklib.h +@@ -28,6 +28,11 @@ struct clk { + int (*setrate) (struct clk *, unsigned long); + long (*roundrate) (struct clk *, unsigned long); + ++ /* ++ * format any additional info ++ */ ++ int (*format) (struct clk *, struct seq_file *); ++ + void *priv; + }; + +diff --git a/kernel/clklib.c b/kernel/clklib.c +index 203af3d..b782220 100644 +--- a/kernel/clklib.c ++++ b/kernel/clklib.c +@@ -293,3 +293,71 @@ out: + return rc; + } + EXPORT_SYMBOL(clk_alloc_function); ++ ++#ifdef CONFIG_DEBUG_FS ++ ++#include ++#include ++static void dump_clocks(struct seq_file *s, struct clk *parent, int nest) ++{ ++ struct clk *clk; ++ int i; ++ ++ list_for_each_entry(clk, &clocks, node) { ++ if (clk->parent == parent) { ++ for (i = 0; i < nest; i++) ++ seq_putc(s, ' '); ++ seq_puts(s, clk->name); ++ ++ i = nest + strlen(clk->name); ++ if (i >= 16) ++ i = 15; ++ for (; i < 16; i++) ++ seq_putc(s, ' '); ++ seq_printf(s, "%c use=%d rate=%lu KHz", ++ clk->set_parent ? '*' : ' ', ++ clk->users, ++ __clk_get_rate(clk)); ++ if (clk->format) ++ clk->format(clk, s); ++ seq_putc(s, '\n'); ++ ++ dump_clocks(s, clk, nest + 1); ++ } ++ } ++} ++ ++static int clocklib_show(struct seq_file *s, void *unused) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&clocks_lock, flags); ++ ++ dump_clocks(s, NULL, 0); ++ ++ spin_unlock_irqrestore(&clocks_lock, flags); ++ ++ return 0; ++} ++ ++static int clocklib_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, clocklib_show, NULL); ++} ++ ++static struct file_operations clocklib_operations = { ++ .open = clocklib_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static int __init clocklib_debugfs_init(void) ++{ ++ debugfs_create_file("clock", S_IFREG | S_IRUGO, ++ NULL, NULL, &clocklib_operations); ++ return 0; ++} ++subsys_initcall(clocklib_debugfs_init); ++ ++#endif /* DEBUG_FS */ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0041-From-80a359e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0041-From-80a359e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch new file mode 100644 index 0000000000..9c95c67e78 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0041-From-80a359e60c2aec59ccf4fca0a7fd20495f82b1d2-Mon-Se.patch @@ -0,0 +1,593 @@ +From 2a143b9546b01fd6c58ebaac7eb46568a17d6a41 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Tue, 12 Feb 2008 04:58:59 +0300 +Subject: [PATCH 41/64] From 80a359e60c2aec59ccf4fca0a7fd20495f82b1d2 Mon Sep 17 00:00:00 2001 + In-Reply-To: <20080207005839.GA28509@doriath.ww600.siemens.net> + References: <20080207005839.GA28509@doriath.ww600.siemens.net> + Date: Thu, 7 Feb 2008 03:35:08 +0300 + Subject: [PATCH 3/5] Use clocklib for ARM pxa sub-arch. + Signed-off-by: Dmitry Baryshkov + +--- + arch/arm/Kconfig | 1 + + arch/arm/mach-pxa/clock.c | 108 ++++++-------------------------------------- + arch/arm/mach-pxa/clock.h | 58 +++++++++++++----------- + arch/arm/mach-pxa/pxa25x.c | 64 +++++++++++++++----------- + arch/arm/mach-pxa/pxa27x.c | 61 +++++++++++++----------- + arch/arm/mach-pxa/pxa3xx.c | 91 +++++++++++++++++++++---------------- + 6 files changed, 169 insertions(+), 214 deletions(-) + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 423e953..47f3c73 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -347,6 +347,7 @@ config ARCH_PXA + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select HAVE_GPIO_LIB ++ select HAVE_CLOCK_LIB + help + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. + +diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c +index 83ef5ec..3296b02 100644 +--- a/arch/arm/mach-pxa/clock.c ++++ b/arch/arm/mach-pxa/clock.c +@@ -8,6 +8,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -19,123 +20,42 @@ + #include "generic.h" + #include "clock.h" + +-static LIST_HEAD(clocks); +-static DEFINE_MUTEX(clocks_mutex); +-static DEFINE_SPINLOCK(clocks_lock); +- +-struct clk *clk_get(struct device *dev, const char *id) +-{ +- struct clk *p, *clk = ERR_PTR(-ENOENT); +- +- mutex_lock(&clocks_mutex); +- list_for_each_entry(p, &clocks, node) { +- if (strcmp(id, p->name) == 0 && +- (p->dev == NULL || p->dev == dev)) { +- clk = p; +- break; +- } +- } +- mutex_unlock(&clocks_mutex); +- +- return clk; +-} +-EXPORT_SYMBOL(clk_get); +- +-void clk_put(struct clk *clk) ++static int clk_gpio27_enable(struct clk *clk) + { +-} +-EXPORT_SYMBOL(clk_put); +- +-int clk_enable(struct clk *clk) +-{ +- unsigned long flags; +- +- spin_lock_irqsave(&clocks_lock, flags); +- if (clk->enabled++ == 0) +- clk->ops->enable(clk); +- spin_unlock_irqrestore(&clocks_lock, flags); +- +- if (clk->delay) +- udelay(clk->delay); ++ pxa_gpio_mode(GPIO11_3_6MHz_MD); + + return 0; + } +-EXPORT_SYMBOL(clk_enable); +- +-void clk_disable(struct clk *clk) +-{ +- unsigned long flags; +- +- WARN_ON(clk->enabled == 0); +- +- spin_lock_irqsave(&clocks_lock, flags); +- if (--clk->enabled == 0) +- clk->ops->disable(clk); +- spin_unlock_irqrestore(&clocks_lock, flags); +-} +-EXPORT_SYMBOL(clk_disable); +- +-unsigned long clk_get_rate(struct clk *clk) +-{ +- unsigned long rate; +- +- rate = clk->rate; +- if (clk->ops->getrate) +- rate = clk->ops->getrate(clk); +- +- return rate; +-} +-EXPORT_SYMBOL(clk_get_rate); +- +- +-static void clk_gpio27_enable(struct clk *clk) +-{ +- pxa_gpio_mode(GPIO11_3_6MHz_MD); +-} + + static void clk_gpio27_disable(struct clk *clk) + { ++ /* FIXME: disable clock */ + } + +-static const struct clkops clk_gpio27_ops = { +- .enable = clk_gpio27_enable, +- .disable = clk_gpio27_disable, +-}; +- +- +-void clk_cken_enable(struct clk *clk) ++int clk_cken_enable(struct clk *clk) + { +- CKEN |= 1 << clk->cken; ++ int cken = ((struct clk_cken_priv *)clk->priv)->cken; ++ CKEN |= 1 << cken; ++ ++ return 0; + } + + void clk_cken_disable(struct clk *clk) + { +- CKEN &= ~(1 << clk->cken); ++ int cken = ((struct clk_cken_priv *)clk->priv)->cken; ++ CKEN &= ~(1 << cken); + } + +-const struct clkops clk_cken_ops = { +- .enable = clk_cken_enable, +- .disable = clk_cken_disable, +-}; +- + static struct clk common_clks[] = { + { + .name = "GPIO27_CLK", +- .ops = &clk_gpio27_ops, + .rate = 3686400, ++ .owner = THIS_MODULE, ++ .enable = clk_gpio27_enable, ++ .disable = clk_gpio27_disable, + }, + }; + +-void clks_register(struct clk *clks, size_t num) +-{ +- int i; +- +- mutex_lock(&clocks_mutex); +- for (i = 0; i < num; i++) +- list_add(&clks[i].node, &clocks); +- mutex_unlock(&clocks_mutex); +-} +- + static int __init clk_init(void) + { + clks_register(common_clks, ARRAY_SIZE(common_clks)); +diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h +index bc6b77e..5d0d067 100644 +--- a/arch/arm/mach-pxa/clock.h ++++ b/arch/arm/mach-pxa/clock.h +@@ -1,43 +1,47 @@ +-struct clk; ++#include ++#include + +-struct clkops { +- void (*enable)(struct clk *); +- void (*disable)(struct clk *); +- unsigned long (*getrate)(struct clk *); ++struct clk_cken_priv { ++ unsigned int cken; + }; + +-struct clk { +- struct list_head node; +- const char *name; +- struct device *dev; +- const struct clkops *ops; +- unsigned long rate; +- unsigned int cken; +- unsigned int delay; +- unsigned int enabled; +-}; +- +-#define INIT_CKEN(_name, _cken, _rate, _delay, _dev) \ ++#define INIT_CKEN(_name, _cken, _rate, _delay) \ + { \ + .name = _name, \ +- .dev = _dev, \ +- .ops = &clk_cken_ops, \ ++ .enable = clk_cken_enable, \ ++ .disable = clk_cken_disable, \ + .rate = _rate, \ +- .cken = CKEN_##_cken, \ + .delay = _delay, \ ++ .priv = &(struct clk_cken_priv) { \ ++ .cken = CKEN_##_cken, \ ++ }, \ + } + +-#define INIT_CK(_name, _cken, _ops, _dev) \ ++#define INIT_CK(_name, _cken, _getrate) \ + { \ + .name = _name, \ +- .dev = _dev, \ +- .ops = _ops, \ +- .cken = CKEN_##_cken, \ ++ .enable = clk_cken_enable, \ ++ .disable = clk_cken_disable, \ ++ .getrate = _getrate, \ ++ .priv = &(struct clk_cken_priv) { \ ++ .cken = CKEN_##_cken, \ ++ }, \ + } + +-extern const struct clkops clk_cken_ops; +- +-void clk_cken_enable(struct clk *clk); ++int clk_cken_enable(struct clk *clk); + void clk_cken_disable(struct clk *clk); + + void clks_register(struct clk *clks, size_t num); ++ ++static int __maybe_unused clk_dev_can_get(struct clk *clk, struct device *dev) ++{ ++ return (dev == clk->priv); ++} ++ ++static int __maybe_unused clk_dev_format(struct clk *clk, struct seq_file *s) ++{ ++ BUG_ON(!clk->priv); ++ seq_puts(s, "for device "); ++ seq_puts(s, ((struct device *)clk->priv)->bus_id); ++ return 0; ++} +diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c +index 5988d99..ed3719b 100644 +--- a/arch/arm/mach-pxa/pxa25x.c ++++ b/arch/arm/mach-pxa/pxa25x.c +@@ -100,40 +100,50 @@ static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk) + return pxa25x_get_memclk_frequency_10khz() * 10000; + } + +-static const struct clkops clk_pxa25x_lcd_ops = { +- .enable = clk_cken_enable, +- .disable = clk_cken_disable, +- .getrate = clk_pxa25x_lcd_getrate, +-}; +- + /* + * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz) + * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz + * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) + */ +-static struct clk pxa25x_hwuart_clk = +- INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev) +-; ++static struct clk pxa25x_hwuart_clk[] = { ++ INIT_CKEN("HWUARTCLK", HWUART, 14745600, 1), ++ { ++ .parent = &pxa25x_hwuart_clk[0], ++ .name = "UARTCLK", ++ .can_get = clk_dev_can_get, ++ .priv = &pxa_device_hwuart.dev, ++ }, ++}; + + static struct clk pxa25x_clks[] = { +- INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev), +- INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev), +- INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), +- INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL), +- INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), +- INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), +- INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), +- +- INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev), +- INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev), +- INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev), ++ INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_getrate), ++ INIT_CKEN("FFUARTCLK", FFUART, 14745600, 1), ++ INIT_CKEN("BTUARTCLK", BTUART, 14745600, 1), ++ INIT_CKEN("STUARTCLK", STUART, 14745600, 1), ++ INIT_CKEN("UDCCLK", USB, 47923000, 5), ++ INIT_CKEN("MMCCLK", MMC, 19169000, 0), ++ INIT_CKEN("I2CCLK", I2C, 31949000, 0), ++ ++ INIT_CKEN("SSP_CLK", SSP, 3686400, 0), ++ INIT_CKEN("NSSPCLK", NSSP, 3686400, 0), ++ INIT_CKEN("ASSPCLK", ASSP, 3686400, 0), + + /* +- INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), +- INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), +- INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), ++ INIT_CKEN("PWMCLK", PWM0, 3686400, 0), ++ INIT_CKEN("PWMCLK", PWM0, 3686400, 0), ++ INIT_CKEN("I2SCLK", I2S, 14745600, 0), + */ +- INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), ++ INIT_CKEN("FICPCLK", FICP, 47923000, 0), ++}; ++ ++static struct clk_function __initdata pxa25x_clk_funcs[] = { ++ CLK_FUNC("FFUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_ffuart.dev, clk_dev_format), ++ CLK_FUNC("BTUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_btuart.dev, clk_dev_format), ++ CLK_FUNC("STUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_stuart.dev, clk_dev_format), ++ CLK_FUNC("STUARTCLK", "SIRCLK", NULL, NULL, NULL), ++ CLK_FUNC("SSP_CLK", "SSPCLK", clk_dev_can_get, &pxa25x_device_ssp.dev, clk_dev_format), ++ CLK_FUNC("NSSPCLK", "SSPCLK", clk_dev_can_get, &pxa25x_device_nssp.dev, clk_dev_format), ++ CLK_FUNC("ASSPCLK", "SSPCLK", clk_dev_can_get, &pxa25x_device_assp.dev, clk_dev_format), + }; + + #ifdef CONFIG_PM +@@ -313,11 +323,13 @@ static int __init pxa25x_init(void) + int ret = 0; + + /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ +- if (cpu_is_pxa25x()) +- clks_register(&pxa25x_hwuart_clk, 1); ++ if (cpu_is_pxa25x()) { ++ clks_register(pxa25x_hwuart_clk, ARRAY_SIZE(pxa25x_hwuart_clk)); ++ } + + if (cpu_is_pxa21x() || cpu_is_pxa25x()) { + clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); ++ clk_alloc_functions(pxa25x_clk_funcs, ARRAY_SIZE(pxa25x_clk_funcs)); + + if ((ret = pxa_init_dma(16))) + return ret; +diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c +index 30ca4fd..c51e7b2 100644 +--- a/arch/arm/mach-pxa/pxa27x.c ++++ b/arch/arm/mach-pxa/pxa27x.c +@@ -126,44 +126,48 @@ static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk) + return pxa27x_get_lcdclk_frequency_10khz() * 10000; + } + +-static const struct clkops clk_pxa27x_lcd_ops = { +- .enable = clk_cken_enable, +- .disable = clk_cken_disable, +- .getrate = clk_pxa27x_lcd_getrate, +-}; +- + static struct clk pxa27x_clks[] = { +- INIT_CK("LCDCLK", LCD, &clk_pxa27x_lcd_ops, &pxa_device_fb.dev), +- INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL), ++ INIT_CK("LCDCLK", LCD, &clk_pxa27x_lcd_getrate), ++ INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_getrate), + +- INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), +- INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), +- INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL), ++ INIT_CKEN("FFUARTCLK", FFUART, 14857000, 1), ++ INIT_CKEN("BTUARTCLK", BTUART, 14857000, 1), ++ INIT_CKEN("STUARTCLK", STUART, 14857000, 1), + +- INIT_CKEN("I2SCLK", I2S, 14682000, 0, &pxa_device_i2s.dev), +- INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), +- INIT_CKEN("UDCCLK", USB, 48000000, 5, &pxa_device_udc.dev), +- INIT_CKEN("MMCCLK", MMC, 19500000, 0, &pxa_device_mci.dev), +- INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev), ++ INIT_CKEN("I2SCLK", I2S, 14682000, 0), ++ INIT_CKEN("I2CCLK", I2C, 32842000, 0), ++ INIT_CKEN("UDCCLK", USB, 48000000, 5), ++ INIT_CKEN("MMCCLK", MMC, 19500000, 0), ++ INIT_CKEN("FICPCLK", FICP, 48000000, 0), + +- INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev), +- INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), +- INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), ++ INIT_CKEN("USBCLK", USBHOST, 48000000, 0), ++ INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0), ++ INIT_CKEN("KBDCLK", KEYPAD, 32768, 0), + +- INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), +- INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), +- INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), ++ INIT_CKEN("SSP1CLK", SSP1, 13000000, 0), ++ INIT_CKEN("SSP2CLK", SSP2, 13000000, 0), ++ INIT_CKEN("SSP3CLK", SSP3, 13000000, 0), + + /* +- INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), +- INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), +- INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), +- INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), +- INIT_CKEN("IMCLK", IM, 0, 0, NULL), +- INIT_CKEN("MEMCLK", MEMC, 0, 0, NULL), ++ INIT_CKEN("PWMCLK", PWM0, 13000000, 0), ++ INIT_CKEN("MSLCLK", MSL, 48000000, 0), ++ INIT_CKEN("USIMCLK", USIM, 48000000, 0), ++ INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0), ++ INIT_CKEN("IMCLK", IM, 0, 0), ++ INIT_CKEN("MEMCLK", MEMC, 0, 0), + */ + }; + ++static struct clk_function __initdata pxa27x_clk_funcs[] = { ++ CLK_FUNC("FFUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_ffuart.dev, clk_dev_format), ++ CLK_FUNC("BTUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_btuart.dev, clk_dev_format), ++ CLK_FUNC("STUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_stuart.dev, clk_dev_format), ++ CLK_FUNC("STUARTCLK", "SIRCLK", NULL, NULL, NULL), ++ CLK_FUNC("SSP1CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp1.dev, clk_dev_format), ++ CLK_FUNC("SSP2CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp2.dev, clk_dev_format), ++ CLK_FUNC("SSP3CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp3.dev, clk_dev_format), ++}; ++ + #ifdef CONFIG_PM + + #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x +@@ -453,6 +457,7 @@ static int __init pxa27x_init(void) + int ret = 0; + if (cpu_is_pxa27x()) { + clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks)); ++ clk_alloc_functions(pxa27x_clk_funcs, ARRAY_SIZE(pxa27x_clk_funcs)); + + if ((ret = pxa_init_dma(32))) + return ret; +diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c +index ccab9da..0f8bbf3 100644 +--- a/arch/arm/mach-pxa/pxa3xx.c ++++ b/arch/arm/mach-pxa/pxa3xx.c +@@ -122,27 +122,31 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk) + return hsio_clk; + } + +-static void clk_pxa3xx_cken_enable(struct clk *clk) ++static int clk_pxa3xx_cken_enable(struct clk *clk) + { +- unsigned long mask = 1ul << (clk->cken & 0x1f); ++ int cken = ((struct clk_cken_priv *)clk->priv)->cken; ++ unsigned long mask = 1ul << (cken & 0x1f); + + local_irq_disable(); + +- if (clk->cken < 32) ++ if (cken < 32) + CKENA |= mask; + else + CKENB |= mask; + + local_irq_enable(); ++ ++ return 0; + } + + static void clk_pxa3xx_cken_disable(struct clk *clk) + { +- unsigned long mask = 1ul << (clk->cken & 0x1f); ++ int cken = ((struct clk_cken_priv *)clk->priv)->cken; ++ unsigned long mask = 1ul << (cken & 0x1f); + + local_irq_disable(); + +- if (clk->cken < 32) ++ if (cken < 32) + CKENA &= ~mask; + else + CKENB &= ~mask; +@@ -150,55 +154,63 @@ static void clk_pxa3xx_cken_disable(struct clk *clk) + local_irq_enable(); + } + +-static const struct clkops clk_pxa3xx_cken_ops = { +- .enable = clk_pxa3xx_cken_enable, +- .disable = clk_pxa3xx_cken_disable, +-}; +- +-static const struct clkops clk_pxa3xx_hsio_ops = { +- .enable = clk_pxa3xx_cken_enable, +- .disable = clk_pxa3xx_cken_disable, +- .getrate = clk_pxa3xx_hsio_getrate, +-}; +- +-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev) \ ++#define PXA3xx_CKEN(_name, _cken, _rate, _delay) \ + { \ + .name = _name, \ +- .dev = _dev, \ +- .ops = &clk_pxa3xx_cken_ops, \ ++ .enable = clk_pxa3xx_cken_enable, \ ++ .disable = clk_pxa3xx_cken_disable, \ + .rate = _rate, \ +- .cken = CKEN_##_cken, \ + .delay = _delay, \ ++ .priv = &(struct clk_cken_priv) { \ ++ .cken = CKEN_##_cken, \ ++ }, \ + } + +-#define PXA3xx_CK(_name, _cken, _ops, _dev) \ ++#define PXA3xx_CK(_name, _cken, _getrate) \ + { \ + .name = _name, \ +- .dev = _dev, \ +- .ops = _ops, \ +- .cken = CKEN_##_cken, \ ++ .enable = clk_pxa3xx_cken_enable, \ ++ .disable = clk_pxa3xx_cken_disable, \ ++ .getrate = _getrate, \ ++ .priv = &(struct clk_cken_priv) { \ ++ .cken = CKEN_##_cken, \ ++ }, \ + } + + static struct clk pxa3xx_clks[] = { +- PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), +- PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), ++ PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_getrate), ++ PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_getrate), + +- PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), +- PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), +- PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL), ++ PXA3xx_CKEN("FFUARTCLK", FFUART, 14857000, 1), ++ PXA3xx_CKEN("BTUARTCLK", BTUART, 14857000, 1), ++ PXA3xx_CKEN("STUARTCLK", STUART, 14857000, 1), + +- PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), +- PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), +- PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev), ++ PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0), ++ PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5), ++ PXA3xx_CKEN("USBCLK", USBH, 48000000, 0), + +- PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), +- PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), +- PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), +- PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev), ++ PXA3xx_CKEN("SSP1CLK", SSP1, 13000000, 0), ++ PXA3xx_CKEN("SSP2CLK", SSP2, 13000000, 0), ++ PXA3xx_CKEN("SSP3CLK", SSP3, 13000000, 0), ++ PXA3xx_CKEN("SSP4CLK", SSP4, 13000000, 0), ++ ++ PXA3xx_CKEN("MMC1CLK", MMC1, 19500000, 0), ++ PXA3xx_CKEN("MMC2CLK", MMC2, 19500000, 0), ++ PXA3xx_CKEN("MMC3CLK", MMC3, 19500000, 0), ++}; + +- PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev), +- PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev), +- PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev), ++static struct clk_function __initdata pxa3xx_clk_funcs[] = { ++ CLK_FUNC("FFUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_ffuart.dev, clk_dev_format), ++ CLK_FUNC("BTUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_btuart.dev, clk_dev_format), ++ CLK_FUNC("STUARTCLK", "UARTCLK", clk_dev_can_get, &pxa_device_stuart.dev, clk_dev_format), ++ CLK_FUNC("STUARTCLK", "SIRCLK", NULL, NULL, NULL), ++ CLK_FUNC("SSP1CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp1.dev, clk_dev_format), ++ CLK_FUNC("SSP2CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp2.dev, clk_dev_format), ++ CLK_FUNC("SSP3CLK", "SSPCLK", clk_dev_can_get, &pxa27x_device_ssp3.dev, clk_dev_format), ++ CLK_FUNC("SSP4CLK", "SSPCLK", clk_dev_can_get, &pxa3xx_device_ssp4.dev, clk_dev_format), ++ CLK_FUNC("MMC1CLK", "MMCCLK", clk_dev_can_get, &pxa_device_mci.dev, clk_dev_format), ++ CLK_FUNC("MMC2CLK", "MMCCLK", clk_dev_can_get, &pxa3xx_device_mci2.dev, clk_dev_format), ++ CLK_FUNC("MMC3CLK", "MMCCLK", clk_dev_can_get, &pxa3xx_device_mci3.dev, clk_dev_format), + }; + + #ifdef CONFIG_PM +@@ -255,6 +267,7 @@ static int __init pxa3xx_init(void) + + if (cpu_is_pxa3xx()) { + clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks)); ++ clk_alloc_functions(pxa3xx_clk_funcs, ARRAY_SIZE(pxa3xx_clk_funcs)); + + if ((ret = pxa_init_dma(32))) + return ret; +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0042-Use-correct-clock-for-IrDA-on-pxa.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0042-Use-correct-clock-for-IrDA-on-pxa.patch new file mode 100644 index 0000000000..a605735df0 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0042-Use-correct-clock-for-IrDA-on-pxa.patch @@ -0,0 +1,26 @@ +From 70dfe7e736467af6242c61092cb64f44d2fd50e3 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Mon, 4 Feb 2008 03:01:05 +0300 +Subject: [PATCH 42/64] Use correct clock for IrDA on pxa + +Signed-off-by: Dmitry Baryshkov +--- + drivers/net/irda/pxaficp_ir.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c +index 8c09344..36d2ec0 100644 +--- a/drivers/net/irda/pxaficp_ir.c ++++ b/drivers/net/irda/pxaficp_ir.c +@@ -814,7 +814,7 @@ static int pxa_irda_probe(struct platform_device *pdev) + si->dev = &pdev->dev; + si->pdata = pdev->dev.platform_data; + +- si->sir_clk = clk_get(&pdev->dev, "UARTCLK"); ++ si->sir_clk = clk_get(&pdev->dev, "SIRCLK"); + si->fir_clk = clk_get(&pdev->dev, "FICPCLK"); + if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) { + err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch new file mode 100644 index 0000000000..22b8414b2d --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch @@ -0,0 +1,153 @@ +From 3932e0f5c4c05200c030b60606ed2eb83550f4bb Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Mon, 4 Feb 2008 03:01:04 +0300 +Subject: [PATCH 43/64] Use clocklib for sa1100 sub-arch. + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/Kconfig | 1 + + arch/arm/mach-sa1100/clock.c | 95 ++--------------------------------------- + 2 files changed, 6 insertions(+), 90 deletions(-) + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 47f3c73..fa47201 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -370,6 +370,7 @@ config ARCH_SA1100 + select ARCH_MTD_XIP + select GENERIC_GPIO + select GENERIC_TIME ++ select HAVE_CLOCK_LIB + help + Support for StrongARM 11x0 based boards. + +diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c +index fc97fe5..6b3cc51 100644 +--- a/arch/arm/mach-sa1100/clock.c ++++ b/arch/arm/mach-sa1100/clock.c +@@ -8,83 +8,13 @@ + #include + #include + #include ++#include + #include + #include + + #include + +-/* +- * Very simple clock implementation - we only have one clock to +- * deal with at the moment, so we only match using the "name". +- */ +-struct clk { +- struct list_head node; +- unsigned long rate; +- const char *name; +- unsigned int enabled; +- void (*enable)(void); +- void (*disable)(void); +-}; +- +-static LIST_HEAD(clocks); +-static DEFINE_MUTEX(clocks_mutex); +-static DEFINE_SPINLOCK(clocks_lock); +- +-struct clk *clk_get(struct device *dev, const char *id) +-{ +- struct clk *p, *clk = ERR_PTR(-ENOENT); +- +- mutex_lock(&clocks_mutex); +- list_for_each_entry(p, &clocks, node) { +- if (strcmp(id, p->name) == 0) { +- clk = p; +- break; +- } +- } +- mutex_unlock(&clocks_mutex); +- +- return clk; +-} +-EXPORT_SYMBOL(clk_get); +- +-void clk_put(struct clk *clk) +-{ +-} +-EXPORT_SYMBOL(clk_put); +- +-int clk_enable(struct clk *clk) +-{ +- unsigned long flags; +- +- spin_lock_irqsave(&clocks_lock, flags); +- if (clk->enabled++ == 0) +- clk->enable(); +- spin_unlock_irqrestore(&clocks_lock, flags); +- return 0; +-} +-EXPORT_SYMBOL(clk_enable); +- +-void clk_disable(struct clk *clk) +-{ +- unsigned long flags; +- +- WARN_ON(clk->enabled == 0); +- +- spin_lock_irqsave(&clocks_lock, flags); +- if (--clk->enabled == 0) +- clk->disable(); +- spin_unlock_irqrestore(&clocks_lock, flags); +-} +-EXPORT_SYMBOL(clk_disable); +- +-unsigned long clk_get_rate(struct clk *clk) +-{ +- return clk->rate; +-} +-EXPORT_SYMBOL(clk_get_rate); +- +- +-static void clk_gpio27_enable(void) ++static int clk_gpio27_enable(struct clk *clk) + { + /* + * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: +@@ -93,9 +23,11 @@ static void clk_gpio27_enable(void) + GAFR |= GPIO_32_768kHz; + GPDR |= GPIO_32_768kHz; + TUCR = TUCR_3_6864MHz; ++ ++ return 0; + } + +-static void clk_gpio27_disable(void) ++static void clk_gpio27_disable(struct clk *clk) + { + TUCR = 0; + GPDR &= ~GPIO_32_768kHz; +@@ -109,23 +41,6 @@ static struct clk clk_gpio27 = { + .disable = clk_gpio27_disable, + }; + +-int clk_register(struct clk *clk) +-{ +- mutex_lock(&clocks_mutex); +- list_add(&clk->node, &clocks); +- mutex_unlock(&clocks_mutex); +- return 0; +-} +-EXPORT_SYMBOL(clk_register); +- +-void clk_unregister(struct clk *clk) +-{ +- mutex_lock(&clocks_mutex); +- list_del(&clk->node); +- mutex_unlock(&clocks_mutex); +-} +-EXPORT_SYMBOL(clk_unregister); +- + static int __init clk_init(void) + { + clk_register(&clk_gpio27); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0044-fix-tmio_mmc-debug-compilation.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0044-fix-tmio_mmc-debug-compilation.patch new file mode 100644 index 0000000000..5ca8228604 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0044-fix-tmio_mmc-debug-compilation.patch @@ -0,0 +1,26 @@ +From 03fdebde257197c13c0d10882e16a2a888ab4e0a Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Sat, 2 Feb 2008 20:23:01 +0300 +Subject: [PATCH 44/64] fix tmio_mmc debug compilation + +Signed-off-by: Dmitry Baryshkov +--- + drivers/mmc/host/tmio_mmc.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c +index 735c386..b0d38e2 100644 +--- a/drivers/mmc/host/tmio_mmc.c ++++ b/drivers/mmc/host/tmio_mmc.c +@@ -329,7 +329,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid) + if (!ireg) { + disable_mmc_irqs(ctl, status & ~irq_mask); + #ifdef CONFIG_MMC_DEBUG +- WARN("tmio_mmc: Spurious MMC irq, disabling! 0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); ++ printk(KERN_WARNING "tmio_mmc: Spurious MMC irq, disabling! 0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); + debug_status(status); + #endif + goto out; +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0045-Update-tmio_ohci.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0045-Update-tmio_ohci.patch new file mode 100644 index 0000000000..10f483b89d --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0045-Update-tmio_ohci.patch @@ -0,0 +1,416 @@ +From fe3c05491370965eb821aedc95f771b86ebab3ab Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:01:44 +0300 +Subject: [PATCH 45/64] Update tmio_ohci: + Ports management. + Basic support for ohci suspend/resume. + +Signed-off-by: Dmitry Baryshkov +--- + drivers/mfd/tc6393xb.c | 40 ++++++++ + drivers/usb/host/ohci-tmio.c | 206 +++++++++++++++++++++++++++++++++++++++--- + 2 files changed, 235 insertions(+), 11 deletions(-) + +diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c +index 9439f39..5d17687 100644 +--- a/drivers/mfd/tc6393xb.c ++++ b/drivers/mfd/tc6393xb.c +@@ -224,6 +224,44 @@ static int tc6393xb_ohci_enable(struct platform_device *ohci) + return 0; + } + ++static int tc6393xb_ohci_suspend(struct platform_device *ohci) ++{ ++ struct platform_device *dev = to_platform_device(ohci->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.usbcken = 0; ++ iowrite16(ccr.raw, &scr->ccr); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static int tc6393xb_ohci_resume(struct platform_device *ohci) ++{ ++ struct platform_device *dev = to_platform_device(ohci->dev.parent); ++ struct tc6393xb *tc6393xb = platform_get_drvdata(dev); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ union tc6393xb_scr_ccr ccr; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ ccr.raw = ioread16(&scr->ccr); ++ ccr.bits.usbcken = 1; ++ iowrite16(ccr.raw, &scr->ccr); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ + static int tc6393xb_fb_disable(struct platform_device *fb) + { + struct platform_device *dev = to_platform_device(fb->dev.parent); +@@ -423,6 +461,8 @@ static struct mfd_cell tc6393xb_cells[] = { + .name = "tmio-ohci", + .enable = tc6393xb_ohci_enable, + .disable = tc6393xb_ohci_disable, ++ .suspend = tc6393xb_ohci_suspend, ++ .resume = tc6393xb_ohci_resume, + .num_resources = ARRAY_SIZE(tc6393xb_ohci_resources), + .resources = tc6393xb_ohci_resources, + }, +diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c +index be609f3..65e3cd3 100644 +--- a/drivers/usb/host/ohci-tmio.c ++++ b/drivers/usb/host/ohci-tmio.c +@@ -75,10 +75,13 @@ struct tmio_uhccr { + u8 x07[3]; + } __attribute__((packed)); + ++#define MAX_TMIO_OHCI_PORTS 3 ++ + #define UHCCR_PM_GKEN 0x0001 + #define UHCCR_PM_CKRNEN 0x0002 + #define UHCCR_PM_USBPW1 0x0004 + #define UHCCR_PM_USBPW2 0x0008 ++#define UHCCR_PM_USBPW3 0x0008 + #define UHCCR_PM_PMEE 0x0100 + #define UHCCR_PM_PMES 0x8000 + +@@ -86,44 +89,96 @@ struct tmio_uhccr { + + struct tmio_hcd { + struct tmio_uhccr __iomem *ccr; ++ spinlock_t lock; /* protects RMW cycles and disabled_ports data */ ++ bool disabled_ports[MAX_TMIO_OHCI_PORTS]; + }; + + #define hcd_to_tmio(hcd) ((struct tmio_hcd *)(hcd_to_ohci(hcd) + 1)) + #define ohci_to_tmio(ohci) ((struct tmio_hcd *)(ohci + 1)) + ++struct indexed_device_attribute{ ++ struct device_attribute dev_attr; ++ int index; ++}; ++#define to_indexed_dev_attr(_dev_attr) \ ++ container_of(_dev_attr, struct indexed_device_attribute, dev_attr) ++ ++#define INDEXED_ATTR(_name, _mode, _show, _store, _index) \ ++ { .dev_attr = __ATTR(_name ## _index, _mode, _show, _store), \ ++ .index = _index } ++ ++#define INDEXED_DEVICE_ATTR(_name, _mode, _show, _store, _index) \ ++struct indexed_device_attribute dev_attr_##_name ## _index \ ++ = INDEXED_ATTR(_name, _mode, _show, _store, _index) ++ ++static bool disabled_tmio_ports[MAX_TMIO_OHCI_PORTS]; ++module_param_array(disabled_tmio_ports, bool, NULL, 0644); ++MODULE_PARM_DESC(disabled_tmio_ports, ++ "disable specified TC6393 usb ports (default: all enabled)"); ++ + /*-------------------------------------------------------------------------*/ + ++static void tmio_write_pm(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct tmio_hcd *tmio = hcd_to_tmio(hcd); ++ struct tmio_uhccr __iomem *ccr = tmio->ccr; ++ u16 pm; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tmio->lock, flags); ++ ++ pm = UHCCR_PM_GKEN | UHCCR_PM_CKRNEN | ++ UHCCR_PM_PMEE | UHCCR_PM_PMES; ++ ++ if (tmio->disabled_ports[0]) ++ pm |= UHCCR_PM_USBPW1; ++ if (tmio->disabled_ports[1]) ++ pm |= UHCCR_PM_USBPW2; ++ if (tmio->disabled_ports[2]) ++ pm |= UHCCR_PM_USBPW3; ++ ++ iowrite16(pm, &ccr->pm); ++ spin_unlock_irqrestore(&tmio->lock, flags); ++} ++ + static void tmio_stop_hc(struct platform_device *dev) + { + struct mfd_cell *cell = mfd_get_cell(dev); + struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + struct tmio_uhccr __iomem *ccr = tmio->ccr; + u16 pm; + +- pm = UHCCR_PM_GKEN | UHCCR_PM_CKRNEN | UHCCR_PM_USBPW1 | UHCCR_PM_USBPW2; ++ pm = UHCCR_PM_GKEN | UHCCR_PM_CKRNEN; ++ switch (ohci->num_ports) { ++ default: ++ dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports); ++ case 3: ++ pm |= UHCCR_PM_USBPW3; ++ case 2: ++ pm |= UHCCR_PM_USBPW2; ++ case 1: ++ pm |= UHCCR_PM_USBPW1; ++ } + iowrite8(0, &ccr->intc); + iowrite8(0, &ccr->ilme); + iowrite16(0, &ccr->basel); + iowrite16(0, &ccr->baseh); +- iowrite16(pm, &ccr->pm); ++ iowrite16(pm, &ccr->pm); + + cell->disable(dev); + } + + static void tmio_start_hc(struct platform_device *dev) + { +- struct mfd_cell *cell = mfd_get_cell(dev); + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + struct tmio_uhccr __iomem *ccr = tmio->ccr; +- u16 pm; + unsigned long base = hcd->rsrc_start; + +- pm = UHCCR_PM_CKRNEN | UHCCR_PM_GKEN | UHCCR_PM_PMEE | UHCCR_PM_PMES; +- cell->enable(dev); +- +- iowrite16(pm, &ccr->pm); ++ tmio_write_pm(dev); + iowrite16(base, &ccr->basel); + iowrite16(base >> 16, &ccr->baseh); + iowrite8(1, &ccr->ilme); +@@ -133,9 +188,56 @@ static void tmio_start_hc(struct platform_device *dev) + ioread8(&ccr->revid), hcd->rsrc_start, hcd->irq); + } + ++static ssize_t tmio_disabled_port_show(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct usb_hcd *hcd = dev_get_drvdata(dev); ++ struct tmio_hcd *tmio = hcd_to_tmio(hcd); ++ int index = to_indexed_dev_attr(attr)->index; ++ return snprintf(buf, PAGE_SIZE, "%c", ++ tmio->disabled_ports[index-1]? 'Y': 'N'); ++} ++ ++static ssize_t tmio_disabled_port_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct usb_hcd *hcd = dev_get_drvdata(dev); ++ struct tmio_hcd *tmio = hcd_to_tmio(hcd); ++ int index = to_indexed_dev_attr(attr)->index; ++ ++ if (!count) ++ return -EINVAL; ++ ++ switch (buf[0]) { ++ case 'y': case 'Y': case '1': ++ tmio->disabled_ports[index-1] = true; ++ break; ++ case 'n': case 'N': case '0': ++ tmio->disabled_ports[index-1] = false; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ tmio_write_pm(to_platform_device(dev)); ++ ++ return 1; ++} ++ ++ ++static INDEXED_DEVICE_ATTR(disabled_usb_port, S_IRUGO | S_IWUSR, ++ tmio_disabled_port_show, tmio_disabled_port_store, 1); ++static INDEXED_DEVICE_ATTR(disabled_usb_port, S_IRUGO | S_IWUSR, ++ tmio_disabled_port_show, tmio_disabled_port_store, 2); ++static INDEXED_DEVICE_ATTR(disabled_usb_port, S_IRUGO | S_IWUSR, ++ tmio_disabled_port_show, tmio_disabled_port_store, 3); ++ + static int usb_hcd_tmio_probe(const struct hc_driver *driver, + struct platform_device *dev) + { ++ struct mfd_cell *cell = mfd_get_cell(dev); + struct resource *config = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_CONFIG); + struct resource *regs = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_CONTROL); + struct resource *sram = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM); +@@ -159,6 +261,12 @@ static int usb_hcd_tmio_probe(const struct hc_driver *driver, + + tmio = hcd_to_tmio(hcd); + ++ spin_lock_init(&tmio->lock); ++ ++ memcpy(tmio->disabled_ports, ++ disabled_tmio_ports, ++ sizeof(disabled_tmio_ports)); ++ + tmio->ccr = ioremap(config->start, config->end - config->start + 1); + if (!tmio->ccr) { + retval = -ENOMEM; +@@ -183,17 +291,46 @@ static int usb_hcd_tmio_probe(const struct hc_driver *driver, + if (retval) + goto err_dmabounce_register_dev; + ++ retval = cell->enable(dev); ++ if (retval) ++ goto err_enable; ++ + tmio_start_hc(dev); + ohci = hcd_to_ohci(hcd); + ohci_hcd_init(ohci); + + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); ++ if (retval) ++ goto err_add_hcd; ++ ++ switch (ohci->num_ports) { ++ default: ++ dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ++ ohci->num_ports); ++ case 3: ++ retval |= device_create_file(&dev->dev, ++ &dev_attr_disabled_usb_port3.dev_attr); ++ case 2: ++ retval |= device_create_file(&dev->dev, ++ &dev_attr_disabled_usb_port2.dev_attr); ++ case 1: ++ retval |= device_create_file(&dev->dev, ++ &dev_attr_disabled_usb_port1.dev_attr); ++ } + + if (retval == 0) + return retval; + +- tmio_stop_hc(dev); ++ device_remove_file(&dev->dev, &dev_attr_disabled_usb_port3.dev_attr); ++ device_remove_file(&dev->dev, &dev_attr_disabled_usb_port2.dev_attr); ++ device_remove_file(&dev->dev, &dev_attr_disabled_usb_port1.dev_attr); ++ ++ usb_remove_hcd(hcd); + ++err_add_hcd: ++ tmio_stop_hc(dev); ++ cell->disable(dev); ++err_enable: + dmabounce_unregister_dev(&dev->dev); + err_dmabounce_register_dev: + dma_release_declared_memory(&dev->dev); +@@ -212,6 +349,9 @@ static void usb_hcd_tmio_remove(struct usb_hcd *hcd, struct platform_device *dev + { + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + ++ device_remove_file(&dev->dev, &dev_attr_disabled_usb_port3.dev_attr); ++ device_remove_file(&dev->dev, &dev_attr_disabled_usb_port2.dev_attr); ++ device_remove_file(&dev->dev, &dev_attr_disabled_usb_port1.dev_attr); + usb_remove_hcd(hcd); + tmio_stop_hc(dev); + dmabounce_unregister_dev(&dev->dev); +@@ -297,13 +437,22 @@ static u64 dma_mask = DMA_32BIT_MASK; + static int ohci_hcd_tmio_drv_probe(struct platform_device *dev) + { + struct resource *sram = platform_get_resource_byname(dev, IORESOURCE_MEM, TMIO_OHCI_SRAM); ++ int retval; + + dev->dev.dma_mask = &dma_mask; + dev->dev.coherent_dma_mask = DMA_32BIT_MASK; + ++ /* FIXME: move dmabounce checkers to tc6393xb core? */ + dmabounce_register_checker(tmio_dmabounce_check, sram); + +- return usb_hcd_tmio_probe(&ohci_tmio_hc_driver, dev); ++ retval = usb_hcd_tmio_probe(&ohci_tmio_hc_driver, dev); ++ ++ if (retval == 0) ++ return retval; ++ ++ dmabounce_remove_checker(tmio_dmabounce_check, sram); ++ ++ return retval; + } + + static int ohci_hcd_tmio_drv_remove(struct platform_device *dev) +@@ -323,14 +472,31 @@ static int ohci_hcd_tmio_drv_remove(struct platform_device *dev) + #ifdef CONFIG_PM + static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state) + { ++ struct mfd_cell *cell = mfd_get_cell(dev); + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); ++ struct tmio_hcd *tmio = hcd_to_tmio(hcd); ++ struct tmio_uhccr __iomem *ccr = tmio->ccr; ++ unsigned long flags; ++ u8 misc; ++ int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + +- tmio_stop_hc(dev); ++ spin_lock_irqsave(&tmio->lock, flags); ++ ++ misc = ioread8(&ccr->misc); ++ misc |= 1 << 3; /* USSUSP */ ++ iowrite8(misc, &ccr->misc); ++ ++ spin_unlock_irqrestore(&tmio->lock, flags); ++ ++ ret = cell->suspend(dev); ++ if (ret) ++ return ret; ++ + hcd->state = HC_STATE_SUSPENDED; + dev->dev.power.power_state = PMSG_SUSPEND; + +@@ -339,15 +505,33 @@ static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t s + + static int ohci_hcd_tmio_drv_resume(struct platform_device *dev) + { ++ struct mfd_cell *cell = mfd_get_cell(dev); + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); ++ struct tmio_hcd *tmio = hcd_to_tmio(hcd); ++ struct tmio_uhccr __iomem *ccr = tmio->ccr; ++ unsigned long flags; ++ u8 misc; ++ int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + ++ ret = cell->resume(dev); ++ if (ret) ++ return ret; ++ + tmio_start_hc(dev); + ++ spin_lock_irqsave(&tmio->lock, flags); ++ ++ misc = ioread8(&ccr->misc); ++ misc &= ~(1 << 3); /* USSUSP */ ++ iowrite8(misc, &ccr->misc); ++ ++ spin_unlock_irqrestore(&tmio->lock, flags); ++ + dev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(hcd); + +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0046-patch-tc6393xb-cleanup.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0046-patch-tc6393xb-cleanup.patch new file mode 100644 index 0000000000..c4b57cb2d1 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0046-patch-tc6393xb-cleanup.patch @@ -0,0 +1,66 @@ +From edaab7ec86235871d8ad219a1d225ce12f67f8af Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:13:29 +0300 +Subject: [PATCH 46/64] patch tc6393xb-cleanup + +--- + drivers/mfd/tc6393xb.c | 20 ++++++++++++-------- + 1 files changed, 12 insertions(+), 8 deletions(-) + +diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c +index 5d17687..dfae61d 100644 +--- a/drivers/mfd/tc6393xb.c ++++ b/drivers/mfd/tc6393xb.c +@@ -590,16 +590,8 @@ static int tc6393xb_hw_init(struct platform_device *dev, int resume) + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- int ret; + int i; + +- if (resume) +- ret = tcpd->resume(dev); +- else +- ret = tcpd->enable(dev); +- if (ret) +- return ret; +- + iowrite8(resume ? + tc6393xb->suspend_state.fer.raw : + 0, &scr->fer); +@@ -664,6 +656,10 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) + goto err_ioremap; + } + ++ retval = tcpd->enable(dev); ++ if (retval) ++ goto err_enable; ++ + retval = tc6393xb_hw_init(dev, 0); + if (retval) + goto err_hw_init; +@@ -690,6 +686,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) + tc6393xb_detach_irq(dev); + + err_hw_init: ++ tcpd->disable(dev); ++err_enable: + iounmap(tc6393xb->scr); + err_ioremap: + release_resource(rscr); +@@ -743,6 +741,12 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state) + + static int tc6393xb_resume(struct platform_device *dev) + { ++ struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; ++ int ret = tcpd->resume(dev); ++ ++ if (ret) ++ return ret; ++ + return tc6393xb_hw_init(dev, 1); + } + #else +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0047-tc6393xb-use-bitmasks-instead-of-bit-field-structs.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0047-tc6393xb-use-bitmasks-instead-of-bit-field-structs.patch new file mode 100644 index 0000000000..54e88253d1 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0047-tc6393xb-use-bitmasks-instead-of-bit-field-structs.patch @@ -0,0 +1,412 @@ +From c18b8e34c39ec0d395988318e6651076a748d6bd Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Tue, 12 Feb 2008 04:40:54 +0300 +Subject: [PATCH 47/64] tc6393xb: use bitmasks instead of bit-field structs + +Signed-off-by: Dmitry Baryshkov +--- + drivers/mfd/tc6393xb.c | 162 ++++++++++++++++++++++++----------------- + include/linux/mfd/tc6393xb.h | 63 +++------------- + 2 files changed, 107 insertions(+), 118 deletions(-) + +diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c +index dfae61d..1a394e4 100644 +--- a/drivers/mfd/tc6393xb.c ++++ b/drivers/mfd/tc6393xb.c +@@ -24,6 +24,31 @@ + #include + #include + ++#define TC6393XB_FER_USBEN BIT(0) /* USB host enable */ ++#define TC6393XB_FER_LCDCVEN BIT(1) /* polysilicon TFT enable */ ++#define TC6393XB_FER_SLCDEN BIT(2) /* SLCD enable */ ++ ++enum pincontrol { ++ opendrain = 0, ++ tristate = 1, ++ pushpull = 2, ++ /* reserved = 3, */ ++}; ++ ++#define TC6393XB_MCR_RDY_MASK (3 << 0) ++#define TC6393XB_MCR_RDY_OPENDRAIN (0 << 0) ++#define TC6393XB_MCR_RDY_TRISTATE (1 << 0) ++#define TC6393XB_MCR_RDY_PUSHPULL (2 << 0) ++#define TC6393XB_MCR_RDY_UNK BIT(2) ++#define TC6393XB_MCR_RDY_EN BIT(3) ++#define TC6393XB_MCR_INT_MASK (3 << 4) ++#define TC6393XB_MCR_INT_OPENDRAIN (0 << 4) ++#define TC6393XB_MCR_INT_TRISTATE (1 << 4) ++#define TC6393XB_MCR_INT_PUSHPULL (2 << 4) ++#define TC6393XB_MCR_INT_UNK BIT(6) ++#define TC6393XB_MCR_INT_EN BIT(7) ++/* bits 8 - 16 are unknown */ ++ + struct tc6393xb_scr { + u8 x00[8]; + u8 revid; /* 0x08 Revision ID */ +@@ -74,8 +99,8 @@ struct tc6393xb { + spinlock_t lock; /* protects RMW cycles */ + + struct { +- union tc6393xb_scr_fer fer; +- union tc6393xb_scr_ccr ccr; ++ u8 fer; ++ u16 ccr; + u8 gpi_bcr[4]; + } suspend_state; + +@@ -90,13 +115,13 @@ static int tc6393xb_mmc_enable(struct platform_device *mmc) { + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; ++ u16 ccr; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.ck32ken = 1; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr |= TC6393XB_CCR_CK32K; ++ iowrite16(ccr, &scr->ccr); + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +@@ -106,13 +131,13 @@ static int tc6393xb_mmc_disable(struct platform_device *mmc) { + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; ++ u16 ccr; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.ck32ken = 0; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr &= ~TC6393XB_CCR_CK32K; ++ iowrite16(ccr, &scr->ccr); + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +@@ -148,14 +173,17 @@ int tc6393xb_lcd_set_power(struct platform_device *fb, bool on) + struct platform_device *dev = to_platform_device(fb->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_fer fer; ++ u8 fer; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + +- fer.raw = ioread8(&scr->fer); +- fer.bits.slcden = on ? 1 : 0; +- iowrite8(fer.raw, &scr->fer); ++ fer = ioread8(&scr->fer); ++ if (on) ++ fer |= TC6393XB_FER_SLCDEN; ++ else ++ fer &= ~TC6393XB_FER_SLCDEN; ++ iowrite8(fer, &scr->fer); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -181,19 +209,19 @@ static int tc6393xb_ohci_disable(struct platform_device *ohci) + struct platform_device *dev = to_platform_device(ohci->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; +- union tc6393xb_scr_fer fer; ++ u16 ccr; ++ u8 fer; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + +- fer.raw = ioread8(&scr->fer); +- fer.bits.usben = 0; +- iowrite8(fer.raw, &scr->fer); ++ fer = ioread8(&scr->fer); ++ fer &= ~TC6393XB_FER_USBEN; ++ iowrite8(fer, &scr->fer); + +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.usbcken = 0; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr &= ~TC6393XB_CCR_USBCK; ++ iowrite16(ccr, &scr->ccr); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -205,19 +233,19 @@ static int tc6393xb_ohci_enable(struct platform_device *ohci) + struct platform_device *dev = to_platform_device(ohci->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; +- union tc6393xb_scr_fer fer; ++ u16 ccr; ++ u8 fer; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.usbcken = 1; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr |= TC6393XB_CCR_USBCK; ++ iowrite16(ccr, &scr->ccr); + +- fer.raw = ioread8(&scr->fer); +- fer.bits.usben = 1; +- iowrite8(fer.raw, &scr->fer); ++ fer = ioread8(&scr->fer); ++ fer |= TC6393XB_FER_USBEN; ++ iowrite8(fer, &scr->fer); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -229,14 +257,14 @@ static int tc6393xb_ohci_suspend(struct platform_device *ohci) + struct platform_device *dev = to_platform_device(ohci->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; ++ u16 ccr; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.usbcken = 0; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr &= ~TC6393XB_CCR_USBCK; ++ iowrite16(ccr, &scr->ccr); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -248,14 +276,14 @@ static int tc6393xb_ohci_resume(struct platform_device *ohci) + struct platform_device *dev = to_platform_device(ohci->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; ++ u16 ccr; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.usbcken = 1; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr |= TC6393XB_CCR_USBCK; ++ iowrite16(ccr, &scr->ccr); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -267,8 +295,8 @@ static int tc6393xb_fb_disable(struct platform_device *fb) + struct platform_device *dev = to_platform_device(fb->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; +- union tc6393xb_scr_fer fer; ++ u16 ccr; ++ u8 fer; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); +@@ -276,14 +304,13 @@ static int tc6393xb_fb_disable(struct platform_device *fb) + /* + * FIXME: is this correct or it should be moved to other _disable? + */ +- fer.raw = ioread8(&scr->fer); +- fer.bits.slcden = 0; +-/* fer.bits.lcdcven = 0; */ +- iowrite8(fer.raw, &scr->fer); ++ fer = ioread8(&scr->fer); ++ fer &= ~TC6393XB_FER_SLCDEN; ++ iowrite8(fer, &scr->fer); + +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.mclksel = disable; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr = (ccr & ~TC6393XB_CCR_MCLK_MASK) | TC6393XB_CCR_MCLK_OFF; ++ iowrite16(ccr, &scr->ccr); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -295,14 +322,14 @@ static int tc6393xb_fb_enable(struct platform_device *fb) + struct platform_device *dev = to_platform_device(fb->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; ++ u16 ccr; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.mclksel = m48MHz; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr = (ccr & ~TC6393XB_CCR_MCLK_MASK) | TC6393XB_CCR_MCLK_48; ++ iowrite16(ccr, &scr->ccr); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -314,14 +341,14 @@ static int tc6393xb_fb_suspend(struct platform_device *fb) + struct platform_device *dev = to_platform_device(fb->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; ++ u16 ccr; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.mclksel = disable; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr = (ccr & ~TC6393XB_CCR_MCLK_MASK) | TC6393XB_CCR_MCLK_OFF; ++ iowrite16(ccr, &scr->ccr); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -333,14 +360,14 @@ static int tc6393xb_fb_resume(struct platform_device *fb) + struct platform_device *dev = to_platform_device(fb->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +- union tc6393xb_scr_ccr ccr; ++ u16 ccr; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + +- ccr.raw = ioread16(&scr->ccr); +- ccr.bits.mclksel = m48MHz; +- iowrite16(ccr.raw, &scr->ccr); ++ ccr = ioread16(&scr->ccr); ++ ccr = (ccr & ~TC6393XB_CCR_MCLK_MASK) | TC6393XB_CCR_MCLK_48; ++ iowrite16(ccr, &scr->ccr); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + +@@ -592,14 +619,15 @@ static int tc6393xb_hw_init(struct platform_device *dev, int resume) + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; + int i; + +- iowrite8(resume ? +- tc6393xb->suspend_state.fer.raw : +- 0, &scr->fer); ++ iowrite8(resume ? tc6393xb->suspend_state.fer : 0, ++ &scr->fer); + iowrite16(tcpd->scr_pll2cr, &scr->pll2cr); + iowrite16(resume? +- tc6393xb->suspend_state.ccr.raw : +- tcpd->scr_ccr.raw, &scr->ccr); +- iowrite16(tcpd->scr_mcr.raw, &scr->mcr); ++ tc6393xb->suspend_state.ccr : ++ tcpd->scr_ccr, &scr->ccr); ++ iowrite16(TC6393XB_MCR_RDY_OPENDRAIN | TC6393XB_MCR_RDY_UNK | TC6393XB_MCR_RDY_EN | ++ TC6393XB_MCR_INT_OPENDRAIN | TC6393XB_MCR_INT_UNK | TC6393XB_MCR_INT_EN | ++ BIT(15), &scr->mcr); + iowrite16(tcpd->scr_gper, &scr->gper); + iowrite8(0, &scr->irr); + iowrite8(0xbf, &scr->imr); +@@ -730,8 +758,8 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state) + int i; + + +- tc6393xb->suspend_state.ccr.raw = ioread16(&scr->ccr); +- tc6393xb->suspend_state.fer.raw = ioread8(&scr->fer); ++ tc6393xb->suspend_state.ccr = ioread16(&scr->ccr); ++ tc6393xb->suspend_state.fer = ioread8(&scr->fer); + for (i = 0; i < 4; i++) + tc6393xb->suspend_state.gpi_bcr[i] = + ioread8(scr->gpi_bcr + i); +diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h +index e699294..2c69f63 100644 +--- a/include/linux/mfd/tc6393xb.h ++++ b/include/linux/mfd/tc6393xb.h +@@ -20,60 +20,21 @@ + #include + #include + +-union tc6393xb_scr_fer { +- u8 raw; +-struct { +- unsigned usben:1; /* D0 USB enable */ +- unsigned lcdcven:1; /* D1 polysylicon TFT enable */ +- unsigned slcden:1; /* D2 SLCD enable */ +-} __attribute__ ((packed)) bits; +-} __attribute__ ((packed)); +- +-union tc6393xb_scr_ccr { +- u16 raw; +-struct { +- unsigned ck32ken:1; /* D0 SD host clock enable */ +- unsigned usbcken:1; /* D1 USB host clock enable */ +- unsigned x00:2; +- unsigned sharp:1; /* D4 ??? set in Sharp's code */ +- unsigned x01:3; +- enum { disable = 0, +- m12MHz = 1, +- m24MHz = 2, +- m48MHz = 3, +- } mclksel:3; /* D10-D8 LCD controller clock */ +- unsigned x02:1; +- enum { h24MHz = 0, +- h48MHz = 1, +- } hclksel:2; /* D13-D12 host bus clock */ +- unsigned x03:2; +-} __attribute__ ((packed)) bits; +-} __attribute__ ((packed)); +- +-enum pincontrol { +- opendrain = 0, +- tristate = 1, +- pushpull = 2, +- /* reserved = 3, */ +-}; +- +-union tc6393xb_scr_mcr { +- u16 raw; +-struct { +- enum pincontrol rdyst:2; /* D1-D0 HRDY control */ +- unsigned x00:1; +- unsigned aren:1; /* D3 HRDY pull up resistance cut off */ +- enum pincontrol intst:2; /* D5-D4 #HINT control */ +- unsigned x01:1; +- unsigned aien:1; /* D7 #HINT pull up resitance cut off */ +- unsigned x02:8; +-} __attribute__ ((packed)) bits; +-} __attribute__ ((packed)); ++#define TC6393XB_CCR_CK32K BIT(0) ++#define TC6393XB_CCR_USBCK BIT(1) ++#define TC6393XB_CCR_UNK1 BIT(4) ++#define TC6393XB_CCR_MCLK_MASK (7 << 8) ++#define TC6393XB_CCR_MCLK_OFF (0 << 8) ++#define TC6393XB_CCR_MCLK_12 (1 << 8) ++#define TC6393XB_CCR_MCLK_24 (2 << 8) ++#define TC6393XB_CCR_MCLK_48 (3 << 8) ++#define TC6393XB_CCR_HCLK_MASK (3 << 12) ++#define TC6393XB_CCR_HCLK_24 (0 << 12) ++#define TC6393XB_CCR_HCLK_48 (1 << 12) + + struct tc6393xb_platform_data { + u16 scr_pll2cr; /* PLL2 Control */ +- union tc6393xb_scr_ccr scr_ccr; /* Clock Control */ +- union tc6393xb_scr_mcr scr_mcr; /* Mode Control */ ++ u16 scr_ccr; /* Clock Control */ + u16 scr_gper; /* GP Enable */ + u32 scr_gpo_doecr; /* GPO Data OE Control */ + u32 scr_gpo_dsr; /* GPO Data Set */ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0048-tc6393xb-GPIO-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0048-tc6393xb-GPIO-support.patch new file mode 100644 index 0000000000..ef47d6cc21 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0048-tc6393xb-GPIO-support.patch @@ -0,0 +1,225 @@ +From 4fb4d83c7090ea21619bb652f2ea9b5c8c0c453e Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 01:42:58 +0300 +Subject: [PATCH 48/64] tc6393xb GPIO support + +Signed-off-by: Dmitry Baryshkov +--- + drivers/mfd/tc6393xb.c | 124 ++++++++++++++++++++++++++++++++++++++++-- + include/linux/mfd/tc6393xb.h | 2 +- + 2 files changed, 119 insertions(+), 7 deletions(-) + +diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c +index 1a394e4..9001687 100644 +--- a/drivers/mfd/tc6393xb.c ++++ b/drivers/mfd/tc6393xb.c +@@ -49,6 +49,8 @@ enum pincontrol { + #define TC6393XB_MCR_INT_EN BIT(7) + /* bits 8 - 16 are unknown */ + ++#include ++ + struct tc6393xb_scr { + u8 x00[8]; + u8 revid; /* 0x08 Revision ID */ +@@ -96,6 +98,8 @@ struct tc6393xb_scr { + struct tc6393xb { + struct tc6393xb_scr __iomem *scr; + ++ struct gpio_chip gpio; ++ + spinlock_t lock; /* protects RMW cycles */ + + struct { +@@ -513,6 +517,96 @@ static struct mfd_cell tc6393xb_cells[] = { + + /*--------------------------------------------------------------------------*/ + ++static int tc6393xb_gpio_get(struct gpio_chip *chip, ++ unsigned offset) ++{ ++ struct tc6393xb *tc6393xb = container_of(chip, ++ struct tc6393xb, gpio); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ u32 mask = 1 << offset; ++ ++ return tmio_ioread32(scr->gpo_dsr) & mask; ++} ++ ++static void __tc6393xb_gpio_set(struct gpio_chip *chip, ++ unsigned offset, int value) ++{ ++ struct tc6393xb *tc6393xb = container_of(chip, ++ struct tc6393xb, gpio); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ u32 dsr; ++ ++ dsr = tmio_ioread32(scr->gpo_dsr); ++ if (value) ++ dsr |= (1L << offset); ++ else ++ dsr &= ~(1L << offset); ++ ++ tmio_iowrite32(dsr, scr->gpo_dsr); ++} ++ ++static void tc6393xb_gpio_set(struct gpio_chip *chip, ++ unsigned offset, int value) ++{ ++ struct tc6393xb *tc6393xb = container_of(chip, ++ struct tc6393xb, gpio); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ __tc6393xb_gpio_set(chip, offset, value); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++} ++ ++static int tc6393xb_gpio_direction_input(struct gpio_chip *chip, ++ unsigned offset) ++{ ++ struct tc6393xb *tc6393xb = container_of(chip, ++ struct tc6393xb, gpio); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ unsigned long flags; ++ u32 doecr; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ doecr = tmio_ioread32(scr->gpo_doecr); ++ ++ doecr &= ~(1 << offset); ++ ++ tmio_iowrite32(doecr, scr->gpo_doecr); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++static int tc6393xb_gpio_direction_output(struct gpio_chip *chip, ++ unsigned offset, int value) ++{ ++ struct tc6393xb *tc6393xb = container_of(chip, ++ struct tc6393xb, gpio); ++ struct tc6393xb_scr __iomem *scr = tc6393xb->scr; ++ unsigned long flags; ++ u32 doecr; ++ ++ spin_lock_irqsave(&tc6393xb->lock, flags); ++ ++ doecr = tmio_ioread32(scr->gpo_doecr); ++ ++ doecr |= (1 << offset); ++ ++ tmio_iowrite32(doecr, scr->gpo_doecr); ++ ++ __tc6393xb_gpio_set(chip, offset, value); ++ ++ spin_unlock_irqrestore(&tc6393xb->lock, flags); ++ ++ return 0; ++} ++ ++/*--------------------------------------------------------------------------*/ ++ + static void + tc6393xb_irq(unsigned int irq, struct irq_desc *desc) + { +@@ -631,10 +725,8 @@ static int tc6393xb_hw_init(struct platform_device *dev, int resume) + iowrite16(tcpd->scr_gper, &scr->gper); + iowrite8(0, &scr->irr); + iowrite8(0xbf, &scr->imr); +- iowrite16(tcpd->scr_gpo_dsr, scr->gpo_dsr + 0); +- iowrite16(tcpd->scr_gpo_dsr >> 16, scr->gpo_dsr + 1); +- iowrite16(tcpd->scr_gpo_doecr, scr->gpo_doecr + 0); +- iowrite16(tcpd->scr_gpo_doecr >> 16, scr->gpo_doecr + 1); ++ tmio_iowrite32(tcpd->scr_gpo_dsr, &scr->gpo_dsr); ++ tmio_iowrite32(tcpd->scr_gpo_doecr, &scr->gpo_doecr); + + if (resume) + for (i = 0; i < 4; i++) +@@ -650,7 +742,7 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) + struct tc6393xb *tc6393xb; + struct resource *iomem; + struct resource *rscr; +- int retval; ++ int retval, temp; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!iomem) +@@ -696,6 +788,18 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) + ioread8(&tc6393xb->scr->revid), + (unsigned long) iomem->start, tc6393xb->irq); + ++ tc6393xb->gpio.label = "tc6393xb"; ++ tc6393xb->gpio.base = tcpd->gpio_base; ++ tc6393xb->gpio.ngpio = 16; /* FIXME: actually 32, but I'm not sure */ ++ tc6393xb->gpio.set = tc6393xb_gpio_set; ++ tc6393xb->gpio.get = tc6393xb_gpio_get; ++ tc6393xb->gpio.direction_input = tc6393xb_gpio_direction_input; ++ tc6393xb->gpio.direction_output = tc6393xb_gpio_direction_output; ++ ++ retval = gpiochip_add(&tc6393xb->gpio); ++ if (retval) ++ goto err_gpio_add; ++ + if (tc6393xb->irq) + tc6393xb_attach_irq(dev); + +@@ -713,6 +817,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) + if (tc6393xb->irq) + tc6393xb_detach_irq(dev); + ++err_gpio_add: ++ temp = gpiochip_remove(&tc6393xb->gpio); + err_hw_init: + tcpd->disable(dev); + err_enable: +@@ -734,6 +840,12 @@ static int __devexit tc6393xb_remove(struct platform_device *dev) { + if (tc6393xb->irq) + tc6393xb_detach_irq(dev); + ++ ret = gpiochip_remove(&tc6393xb->gpio); ++ if (ret) { ++ dev_err(&dev->dev, "Can't remove gpio chip: %d\n", ret); ++ return ret; ++ } ++ + ret = tcpd->disable(dev); + + iounmap(tc6393xb->scr); +@@ -804,7 +916,7 @@ static void __exit tc6393xb_exit(void) + platform_driver_unregister(&tc6393xb_driver); + } + +-module_init(tc6393xb_init); ++subsys_initcall(tc6393xb_init); + module_exit(tc6393xb_exit); + + MODULE_LICENSE("GPL"); +diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h +index 2c69f63..97c4c7c 100644 +--- a/include/linux/mfd/tc6393xb.h ++++ b/include/linux/mfd/tc6393xb.h +@@ -45,6 +45,7 @@ struct tc6393xb_platform_data { + int (*resume)(struct platform_device *dev); + + int irq_base; /* a base for cascaded irq */ ++ int gpio_base; + + struct tmio_nand_data *nand_data; + struct tmio_fb_data *fb_data; +@@ -54,7 +55,6 @@ extern int tc6393xb_lcd_set_power(struct platform_device *fb_dev, bool on); + extern int tc6393xb_lcd_mode(struct platform_device *fb_dev, + struct fb_videomode *mode); + +- + /* + * Relative to irq_base + */ +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0049-platform-support-for-TMIO-on-tosa.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0049-platform-support-for-TMIO-on-tosa.patch new file mode 100644 index 0000000000..ff1186cb71 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0049-platform-support-for-TMIO-on-tosa.patch @@ -0,0 +1,373 @@ +From 30588bdd5c5cdd9fbe269643f582862a76f09efb Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Tue, 12 Feb 2008 04:52:48 +0300 +Subject: [PATCH 49/64] platform support for TMIO on tosa + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/tosa.c | 179 ++++++++++++++++++++++++++++++++++++++- + include/asm-arm/arch-pxa/irqs.h | 1 + + include/asm-arm/arch-pxa/tosa.h | 45 ++++++++-- + sound/soc/pxa/tosa.c | 3 +- + 4 files changed, 216 insertions(+), 12 deletions(-) + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index 5268e94..e2eec0f 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -18,7 +18,13 @@ + #include + #include + #include ++#include ++#include + #include ++#include ++#include ++#include ++#include + #include + #include + #include +@@ -298,12 +304,183 @@ static struct platform_device tosaled_device = { + .id = -1, + }; + ++/* ++ * Toshiba Mobile IO Controller ++ */ ++static struct resource tc6393xb_resources[] = { ++ [0] = { ++ .start = TOSA_LCDC_PHYS, ++ .end = TOSA_LCDC_PHYS + 0x3ffffff, ++ .flags = IORESOURCE_MEM, ++ }, ++ ++ [1] = { ++ .start = TOSA_IRQ_GPIO_TC6393XB_INT, ++ .end = TOSA_IRQ_GPIO_TC6393XB_INT, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++ ++static int tosa_tc6393xb_enable(struct platform_device *dev) ++{ ++ ++ reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON); ++ reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND); ++ reset_scoop_gpio(&tosascoop_device.dev, TOSA_SCOOP_TC6393XB_REST_IN); /* #PCLR */ ++ pxa_gpio_mode(GPIO11_3_6MHz_MD); ++ pxa_gpio_mode(GPIO18_RDY_MD); ++ mdelay(1); ++ set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND); ++ mdelay(10); ++ set_scoop_gpio(&tosascoop_device.dev, TOSA_SCOOP_TC6393XB_REST_IN); /* #PCLR */ ++ set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON); ++ ++ return 0; ++} ++ ++static int tosa_tc6393xb_disable(struct platform_device *dev) ++{ ++ ++ reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON); ++ reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND); ++ reset_scoop_gpio(&tosascoop_device.dev, TOSA_SCOOP_TC6393XB_REST_IN); /* #PCLR */ ++ pxa_gpio_mode(GPIO11_3_6MHz_MD|GPIO_OUT); ++ GPSR0 = GPIO_bit(GPIO11_3_6MHz); ++ ++ return 0; ++} ++ ++static int tosa_tc6393xb_resume(struct platform_device *dev) ++{ ++ ++ pxa_gpio_mode(GPIO11_3_6MHz_MD); ++ pxa_gpio_mode(GPIO18_RDY_MD); ++ mdelay(1); ++ set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND); ++ mdelay(10); ++ set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON); ++ mdelay(10); ++ ++ return 0; ++} ++ ++static int tosa_tc6393xb_suspend(struct platform_device *dev) ++{ ++ ++ reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_L3V_ON); ++ reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_TC6393XB_SUSPEND); ++ pxa_gpio_mode(GPIO11_3_6MHz_MD|GPIO_OUT); ++ GPSR0 = GPIO_bit(GPIO11_3_6MHz); ++ ++ return 0; ++} ++ ++static struct mtd_partition tosa_nand_partition[] = { ++ { ++ .name = "smf", ++ .offset = 0, ++ .size = 7 * 1024 * 1024, ++ }, ++ { ++ .name = "root", ++ .offset = MTDPART_OFS_APPEND, ++ .size = 28 * 1024 * 1024, ++ }, ++ { ++ .name = "home", ++ .offset = MTDPART_OFS_APPEND, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; ++ ++static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = { ++ .options = 0, ++ .offs = 4, ++ .len = 2, ++ .pattern = scan_ff_pattern ++}; ++ ++static struct tmio_nand_data tosa_tc6393xb_nand_config = { ++ .num_partitions = ARRAY_SIZE(tosa_nand_partition), ++ .partition = tosa_nand_partition, ++ .badblock_pattern = &tosa_tc6393xb_nand_bbt, ++}; ++ ++static struct fb_videomode tosa_tc6393xb_lcd_mode[] = { ++ { ++ .xres = 480, ++ .yres = 640, ++ .pixclock = 0x002cdf00,/* PLL divisor */ ++ .left_margin = 0x004c, ++ .right_margin = 0x005b, ++ .upper_margin = 0x0001, ++ .lower_margin = 0x000d, ++ .hsync_len = 0x0002, ++ .vsync_len = 0x0001, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ },{ ++ .xres = 240, ++ .yres = 320, ++ .pixclock = 0x00e7f203,/* PLL divisor */ ++ .left_margin = 0x0024, ++ .right_margin = 0x002f, ++ .upper_margin = 0x0001, ++ .lower_margin = 0x000d, ++ .hsync_len = 0x0002, ++ .vsync_len = 0x0001, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ } ++}; ++ ++static struct tmio_fb_data tosa_tc6393xb_fb_config = { ++ .lcd_set_power = tc6393xb_lcd_set_power, ++ .lcd_mode = tc6393xb_lcd_mode, ++ .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode), ++ .modes = &tosa_tc6393xb_lcd_mode[0], ++}; ++ ++static struct tc6393xb_platform_data tosa_tc6393xb_setup = { ++ .scr_pll2cr = 0x0cc1, ++ .scr_ccr = TC6393XB_CCR_UNK1 | TC6393XB_CCR_HCLK_48, ++ .scr_gper = 0x3300, ++ .scr_gpo_dsr = TOSA_TC6393XB_CARD_VCC_ON | TOSA_TC6393XB_CHARGE_OFF_JC, ++ .scr_gpo_doecr = TOSA_TC6393XB_GPO_OE, ++ ++ .irq_base = IRQ_BOARD_START, ++ ++ .enable = tosa_tc6393xb_enable, ++ .disable = tosa_tc6393xb_disable, ++ .suspend = tosa_tc6393xb_suspend, ++ .resume = tosa_tc6393xb_resume, ++ ++ .nand_data = &tosa_tc6393xb_nand_config, ++ .fb_data = &tosa_tc6393xb_fb_config, ++}; ++ ++ ++struct platform_device tc6393xb_device = { ++ .name = "tc6393xb", ++ .id = -1, ++ .dev = { ++ .platform_data = &tosa_tc6393xb_setup, ++ }, ++ .num_resources = ARRAY_SIZE(tc6393xb_resources), ++ .resource = tc6393xb_resources, ++}; ++EXPORT_SYMBOL(tc6393xb_device); ++ + static struct platform_device *devices[] __initdata = { + &tosascoop_device, + &tosascoop_jc_device, + &tosakbd_device, + &tosa_gpio_keys_device, + &tosaled_device, ++ &tc6393xb_device, + }; + + static void tosa_poweroff(void) +@@ -332,7 +509,7 @@ static void __init tosa_init(void) + arm_pm_restart = tosa_restart; + + pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); +- pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); ++ pxa_gpio_mode(TOSA_GPIO_TC6393XB_INT | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); + + /* setup sleep mode values */ +diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h +index b76ee6d..bf622d8 100644 +--- a/include/asm-arm/arch-pxa/irqs.h ++++ b/include/asm-arm/arch-pxa/irqs.h +@@ -180,6 +180,7 @@ + #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) + #elif defined(CONFIG_ARCH_LUBBOCK) || \ + defined(CONFIG_MACH_LOGICPD_PXA270) || \ ++ defined(CONFIG_MACH_TOSA) || \ + defined(CONFIG_MACH_MAINSTONE) + #define NR_IRQS (IRQ_BOARD_END) + #else +diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h +index c05e4fa..1b202b2 100644 +--- a/include/asm-arm/arch-pxa/tosa.h ++++ b/include/asm-arm/arch-pxa/tosa.h +@@ -20,11 +20,35 @@ + /* Jacket Scoop */ + #define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) + ++#define TC6393XB_GPIO(i) (1 << (i)) ++/* ++ * TC6393 GPIOs ++ */ ++#define TOSA_TC6393XB_TG_ON TC6393XB_GPIO(0) ++#define TOSA_TC6393XB_L_MUTE TC6393XB_GPIO(1) ++#define TOSA_TC6393XB_BL_C20MA TC6393XB_GPIO(3) ++#define TOSA_TC6393XB_CARD_VCC_ON TC6393XB_GPIO(4) ++#define TOSA_TC6393XB_CHARGE_OFF TC6393XB_GPIO(6) ++#define TOSA_TC6393XB_CHARGE_OFF_JC TC6393XB_GPIO(7) ++#define TOSA_TC6393XB_BAT0_V_ON TC6393XB_GPIO(9) ++#define TOSA_TC6393XB_BAT1_V_ON TC6393XB_GPIO(10) ++#define TOSA_TC6393XB_BU_CHRG_ON TC6393XB_GPIO(11) ++#define TOSA_TC6393XB_BAT_SW_ON TC6393XB_GPIO(12) ++#define TOSA_TC6393XB_BAT0_TH_ON TC6393XB_GPIO(14) ++#define TOSA_TC6393XB_BAT1_TH_ON TC6393XB_GPIO(15) ++ ++#define TOSA_TC6393XB_GPO_OE (TOSA_TC6393XB_TG_ON | TOSA_TC6393XB_L_MUTE | TOSA_TC6393XB_BL_C20MA | \ ++ TOSA_TC6393XB_CARD_VCC_ON | TOSA_TC6393XB_CHARGE_OFF | \ ++ TOSA_TC6393XB_CHARGE_OFF_JC | TOSA_TC6393XB_BAT0_V_ON | \ ++ TOSA_TC6393XB_BAT1_V_ON | TOSA_TC6393XB_BU_CHRG_ON | \ ++ TOSA_TC6393XB_BAT_SW_ON | TOSA_TC6393XB_BAT0_TH_ON | \ ++ TOSA_TC6393XB_BAT1_TH_ON) ++ + /* + * SCOOP2 internal GPIOs + */ + #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 +-#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 ++#define TOSA_SCOOP_TC6393XB_REST_IN SCOOP_GPCR_PA12 + #define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13 + #define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14 + #define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15 +@@ -34,11 +58,11 @@ + #define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 + + /* GPIO Direction 1 : output mode / 0:input mode */ +-#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ ++#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393XB_REST_IN | \ + TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\ + TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) + /* GPIO out put level when init 1: Hi */ +-#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) ++#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393XB_REST_IN ) + + /* + * SCOOP2 jacket GPIOs +@@ -47,8 +71,8 @@ + #define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 + #define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 + #define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14 +-#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 +-#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 ++#define TOSA_SCOOP_JC_TC6393XB_SUSPEND SCOOP_GPCR_PA15 ++#define TOSA_SCOOP_JC_TC6393XB_L3V_ON SCOOP_GPCR_PA16 + #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 + #define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18 + #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 +@@ -56,7 +80,7 @@ + /* GPIO Direction 1 : output mode / 0:input mode */ + #define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ + TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \ +- TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ ++ TOSA_SCOOP_JC_TC6393XB_SUSPEND | TOSA_SCOOP_JC_TC6393XB_L3V_ON | \ + TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) + /* GPIO out put level when init 1: Hi */ + #define TOSA_SCOOP_JC_IO_OUT ( 0 ) +@@ -94,13 +118,13 @@ + #define TOSA_GPIO_JACKET_DETECT (7) + #define TOSA_GPIO_nSD_DETECT (9) + #define TOSA_GPIO_nSD_INT (10) +-#define TOSA_GPIO_TC6393_CLK (11) ++#define TOSA_GPIO_TC6393XB_CLK (11) + #define TOSA_GPIO_BAT1_CRG (12) + #define TOSA_GPIO_CF_CD (13) + #define TOSA_GPIO_BAT0_CRG (14) +-#define TOSA_GPIO_TC6393_INT (15) ++#define TOSA_GPIO_TC6393XB_INT (15) + #define TOSA_GPIO_BAT0_LOW (17) +-#define TOSA_GPIO_TC6393_RDY (18) ++#define TOSA_GPIO_TC6393XB_RDY (18) + #define TOSA_GPIO_ON_RESET (19) + #define TOSA_GPIO_EAR_IN (20) + #define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ +@@ -147,7 +171,7 @@ + #define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) + #define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) + #define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) +-#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) ++#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) + #define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) + #define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) + #define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) +@@ -161,6 +185,7 @@ + + #define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) + ++extern struct platform_device tc6393xb_device; + extern struct platform_device tosascoop_jc_device; + extern struct platform_device tosascoop_device; + +diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c +index 5504e30..21c51b5 100644 +--- a/sound/soc/pxa/tosa.c ++++ b/sound/soc/pxa/tosa.c +@@ -32,7 +32,6 @@ + #include + + #include +-#include + #include + #include + #include +@@ -138,10 +137,12 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol, + /* tosa dapm event handlers */ + static int tosa_hp_event(struct snd_soc_dapm_widget *w, int event) + { ++#if 0 + if (SND_SOC_DAPM_EVENT_ON(event)) + set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); + else + reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); ++#endif + return 0; + } + +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0050-tosa-update-for-tc6393xb-gpio.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0050-tosa-update-for-tc6393xb-gpio.patch new file mode 100644 index 0000000000..c9b5ac29d4 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0050-tosa-update-for-tc6393xb-gpio.patch @@ -0,0 +1,99 @@ +From f24c23ba56cdd072b332e8de3e0cff8a31e7e36a Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:03:19 +0300 +Subject: [PATCH 50/64] tosa update for tc6393xb gpio + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/tosa.c | 6 +++++- + include/asm-arm/arch-pxa/tosa.h | 36 ++++++++++++++++++++++++------------ + 2 files changed, 29 insertions(+), 13 deletions(-) + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index e2eec0f..3e832dc 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -35,6 +35,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -448,10 +449,13 @@ static struct tc6393xb_platform_data tosa_tc6393xb_setup = { + .scr_pll2cr = 0x0cc1, + .scr_ccr = TC6393XB_CCR_UNK1 | TC6393XB_CCR_HCLK_48, + .scr_gper = 0x3300, +- .scr_gpo_dsr = TOSA_TC6393XB_CARD_VCC_ON | TOSA_TC6393XB_CHARGE_OFF_JC, ++ .scr_gpo_dsr = ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_CARD_VCC_ON) | ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_CHARGE_OFF_JC), + .scr_gpo_doecr = TOSA_TC6393XB_GPO_OE, + + .irq_base = IRQ_BOARD_START, ++ .gpio_base = TOSA_TC6393XB_GPIO_BASE, + + .enable = tosa_tc6393xb_enable, + .disable = tosa_tc6393xb_disable, +diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h +index 1b202b2..410fa9a 100644 +--- a/include/asm-arm/arch-pxa/tosa.h ++++ b/include/asm-arm/arch-pxa/tosa.h +@@ -20,16 +20,21 @@ + /* Jacket Scoop */ + #define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) + +-#define TC6393XB_GPIO(i) (1 << (i)) + /* + * TC6393 GPIOs + */ +-#define TOSA_TC6393XB_TG_ON TC6393XB_GPIO(0) +-#define TOSA_TC6393XB_L_MUTE TC6393XB_GPIO(1) +-#define TOSA_TC6393XB_BL_C20MA TC6393XB_GPIO(3) +-#define TOSA_TC6393XB_CARD_VCC_ON TC6393XB_GPIO(4) ++ ++#define TOSA_TC6393XB_GPIO_BASE NR_BUILTIN_GPIO ++ ++#define TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) ++#define TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) ++ ++#define TOSA_TC6393XB_TG_ON TC6393XB_GPIO(0) ++#define TOSA_TC6393XB_L_MUTE TC6393XB_GPIO(1) ++#define TOSA_TC6393XB_BL_C20MA TC6393XB_GPIO(3) ++#define TOSA_TC6393XB_CARD_VCC_ON TC6393XB_GPIO(4) + #define TOSA_TC6393XB_CHARGE_OFF TC6393XB_GPIO(6) +-#define TOSA_TC6393XB_CHARGE_OFF_JC TC6393XB_GPIO(7) ++#define TOSA_TC6393XB_CHARGE_OFF_JC TC6393XB_GPIO(7) + #define TOSA_TC6393XB_BAT0_V_ON TC6393XB_GPIO(9) + #define TOSA_TC6393XB_BAT1_V_ON TC6393XB_GPIO(10) + #define TOSA_TC6393XB_BU_CHRG_ON TC6393XB_GPIO(11) +@@ -37,12 +42,19 @@ + #define TOSA_TC6393XB_BAT0_TH_ON TC6393XB_GPIO(14) + #define TOSA_TC6393XB_BAT1_TH_ON TC6393XB_GPIO(15) + +-#define TOSA_TC6393XB_GPO_OE (TOSA_TC6393XB_TG_ON | TOSA_TC6393XB_L_MUTE | TOSA_TC6393XB_BL_C20MA | \ +- TOSA_TC6393XB_CARD_VCC_ON | TOSA_TC6393XB_CHARGE_OFF | \ +- TOSA_TC6393XB_CHARGE_OFF_JC | TOSA_TC6393XB_BAT0_V_ON | \ +- TOSA_TC6393XB_BAT1_V_ON | TOSA_TC6393XB_BU_CHRG_ON | \ +- TOSA_TC6393XB_BAT_SW_ON | TOSA_TC6393XB_BAT0_TH_ON | \ +- TOSA_TC6393XB_BAT1_TH_ON) ++#define TOSA_TC6393XB_GPO_OE ( \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_TG_ON) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_L_MUTE) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_BL_C20MA) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_CARD_VCC_ON) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_CHARGE_OFF) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_CHARGE_OFF_JC) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT0_V_ON) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT1_V_ON) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_BU_CHRG_ON) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT_SW_ON) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT0_TH_ON) | \ ++ TC6393XB_GPIO_BIT(TOSA_TC6393XB_BAT1_TH_ON)) + + /* + * SCOOP2 internal GPIOs +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0051-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0051-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch new file mode 100644 index 0000000000..585f1af288 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0051-fix-sound-soc-pxa-tosa.c-to-new-gpio-api.patch @@ -0,0 +1,86 @@ +From 38ef1b452cc3138157b92d02b31cad439d12d0ca Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:03:34 +0300 +Subject: [PATCH 51/64] fix sound/soc/pxa/tosa.c to new gpio api + +Signed-off-by: Dmitry Baryshkov +--- + sound/soc/pxa/tosa.c | 33 ++++++++++++++++++++++++++------- + 1 files changed, 26 insertions(+), 7 deletions(-) + +diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c +index 21c51b5..b758de8 100644 +--- a/sound/soc/pxa/tosa.c ++++ b/sound/soc/pxa/tosa.c +@@ -36,6 +36,7 @@ + #include + #include + #include ++#include + + #include "../codecs/wm9712.h" + #include "pxa2xx-pcm.h" +@@ -137,11 +138,11 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol, + /* tosa dapm event handlers */ + static int tosa_hp_event(struct snd_soc_dapm_widget *w, int event) + { +-#if 0 ++#ifdef CONFIG_MFD_TC6393XB + if (SND_SOC_DAPM_EVENT_ON(event)) +- set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); ++ gpio_set_value(TOSA_TC6393XB_L_MUTE, 1); + else +- reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); ++ gpio_set_value(TOSA_TC6393XB_L_MUTE, 0); + #endif + return 0; + } +@@ -262,16 +263,31 @@ static int __init tosa_init(void) + if (!machine_is_tosa()) + return -ENODEV; + ++#ifdef CONFIG_MFD_TC6393XB ++ ret = gpio_request(TOSA_TC6393XB_L_MUTE, "Headphone Jack"); ++ if (ret) ++ return ret; ++ gpio_direction_output(TOSA_TC6393XB_L_MUTE, 0); ++#endif + tosa_snd_device = platform_device_alloc("soc-audio", -1); +- if (!tosa_snd_device) +- return -ENOMEM; ++ if (!tosa_snd_device) { ++ ret = -ENOMEM; ++ goto err_alloc; ++ } + + platform_set_drvdata(tosa_snd_device, &tosa_snd_devdata); + tosa_snd_devdata.dev = &tosa_snd_device->dev; + ret = platform_device_add(tosa_snd_device); + +- if (ret) +- platform_device_put(tosa_snd_device); ++ if (!ret) ++ return 0; ++ ++ platform_device_put(tosa_snd_device); ++ ++err_alloc: ++#ifdef CONFIG_MFD_TC6393XB ++ gpio_free(TOSA_TC6393XB_L_MUTE); ++#endif + + return ret; + } +@@ -279,6 +295,9 @@ static int __init tosa_init(void) + static void __exit tosa_exit(void) + { + platform_device_unregister(tosa_snd_device); ++#ifdef CONFIG_MFD_TC6393XB ++ gpio_free(TOSA_TC6393XB_L_MUTE); ++#endif + } + + module_init(tosa_init); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0052-tosa-platform-backlight-support.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0052-tosa-platform-backlight-support.patch new file mode 100644 index 0000000000..ef5263c18e --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0052-tosa-platform-backlight-support.patch @@ -0,0 +1,400 @@ +From c7537657bc33d4ee1616accd0259e160d57c5c1b Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Wed, 9 Jan 2008 02:05:40 +0300 +Subject: [PATCH 52/64] tosa platform backlight support + +Signed-off-by: Dmitry Baryshkov +--- + drivers/video/backlight/Kconfig | 10 + + drivers/video/backlight/Makefile | 1 + + drivers/video/backlight/tosa_bl.c | 345 +++++++++++++++++++++++++++++++++++++ + 3 files changed, 356 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/backlight/tosa_bl.c + +diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig +index 9609a6c..f47a601 100644 +--- a/drivers/video/backlight/Kconfig ++++ b/drivers/video/backlight/Kconfig +@@ -59,6 +59,16 @@ config BACKLIGHT_CORGI + known as the Corgi backlight driver. If you have a Sharp Zaurus + SL-C7xx, SL-Cxx00 or SL-6000x say y. Most users can say n. + ++config BACKLIGHT_TOSA ++ tristate "Sharp Tosa LCD/Backlight Driver (SL-6000)" ++ depends on BACKLIGHT_CLASS_DEVICE && MACH_TOSA ++ default y ++ select I2C ++ select I2C_PXA ++ select PXA_SSP ++ help ++ If you have a Sharp Zaurus SL-6000y enable this driver. ++ + config BACKLIGHT_LOCOMO + tristate "Sharp LOCOMO LCD/Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO +diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile +index 965a78b..e8a6a7c 100644 +--- a/drivers/video/backlight/Makefile ++++ b/drivers/video/backlight/Makefile +@@ -5,6 +5,7 @@ obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o + + obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o + obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o ++obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o + obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o + obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o + obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o +diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c +new file mode 100644 +index 0000000..11a89c6 +--- /dev/null ++++ b/drivers/video/backlight/tosa_bl.c +@@ -0,0 +1,345 @@ ++/* ++ * LCD / Backlight control code for Sharp SL-6000x (tosa) ++ * ++ * Copyright (c) 2005 Dirk Opfer ++ * Copyright (c) 2007 Dmitry Baryshkov ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DAC_BASE 0x4e ++#define DAC_CH1 0 ++#define DAC_CH2 1 ++ ++#define TG_REG0_VQV 0x0001 ++#define TG_REG0_COLOR 0x0002 ++#define TG_REG0_UD 0x0004 ++#define TG_REG0_LR 0x0008 ++#define COMADJ_DEFAULT 97 ++ ++static unsigned short normal_i2c[] = { DAC_BASE, I2C_CLIENT_END }; ++I2C_CLIENT_INSMOD; ++ ++struct tosa_bl_data { ++ struct i2c_client client; ++ ++ int comadj; ++ spinlock_t nssp_lock; ++ struct ssp_dev nssp_dev; ++ struct ssp_state nssp_state; ++ ++ struct backlight_device *bl_dev; ++}; ++ ++static struct i2c_driver tosa_bl_driver; ++ ++static void pxa_nssp_output(struct tosa_bl_data *data, unsigned char reg, unsigned char value) ++{ ++ unsigned long flag; ++ u32 dummy; ++ u32 dat = ( ((reg << 5) & 0xe0) | (value & 0x1f) ); ++ spin_lock_irqsave(&data->nssp_lock, flag); ++ ++ ssp_config(&data->nssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(128)); ++ ssp_enable(&data->nssp_dev); ++ ++ ssp_write_word(&data->nssp_dev,dat); ++ ++ /* Read null data back from device to prevent SSP overflow */ ++ ssp_read_word(&data->nssp_dev, &dummy); ++ ssp_disable(&data->nssp_dev); ++ spin_unlock_irqrestore(&data->nssp_lock, flag); ++ ++} ++ ++static void tosa_set_backlight(struct tosa_bl_data *data, int brightness) ++{ ++ /* SetBacklightDuty */ ++ i2c_smbus_write_byte_data(&data->client, DAC_CH2, (unsigned char)brightness); ++ ++ /* SetBacklightVR */ ++ if (brightness) ++ gpio_set_value(TOSA_TC6393XB_BL_C20MA, 1); ++ else ++ gpio_set_value(TOSA_TC6393XB_BL_C20MA, 0); ++ ++ /* bl_enable GP04=1 otherwise GP04=0*/ ++ pxa_nssp_output(data, TG_GPODR2, brightness ? 0x01 : 0x00); ++} ++ ++static void tosa_lcd_tg_init(struct tosa_bl_data *data) ++{ ++ dev_dbg(&data->bl_dev->dev, "tosa_lcd_init\n"); ++ ++ /* L3V On */ ++ set_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC6393XB_L3V_ON); ++ mdelay(60); ++ ++ /* TG On */ ++ gpio_set_value(TOSA_TC6393XB_TG_ON, 0); ++ mdelay(60); ++ ++ pxa_nssp_output(data, TG_TPOSCTL,0x00); /* delayed 0clk TCTL signal for VGA */ ++ pxa_nssp_output(data, TG_GPOSR,0x02); /* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */ ++} ++ ++static void tosa_lcd_tg_on(struct tosa_bl_data *data/*, const struct fb_videomode *mode*/) ++{ ++ const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR; ++ ++ tosa_lcd_tg_init(data); ++ ++ dev_dbg(&data->bl_dev->dev, "tosa_lcd_on\n"); ++ pxa_nssp_output(data, TG_PNLCTL, value | (/*mode->yres == 320 ? 0 : */ TG_REG0_VQV)); ++ ++ /* TG LCD pannel power up */ ++ pxa_nssp_output(data, TG_PINICTL,0x4); ++ mdelay(50); ++ ++ /* TG LCD GVSS */ ++ pxa_nssp_output(data, TG_PINICTL,0x0); ++ mdelay(50); ++ ++ /* set common voltage */ ++ i2c_smbus_write_byte_data(&data->client, DAC_CH1, data->comadj); ++} ++ ++static void tosa_lcd_tg_off(struct tosa_bl_data *data) ++{ ++ tosa_set_backlight(data, 0); ++ dev_dbg(&data->bl_dev->dev, "tosa_lcd_off\n"); ++ /* TG LCD VHSA off */ ++ pxa_nssp_output(data, TG_PINICTL,0x4); ++ mdelay(50); ++ ++ /* TG LCD signal off */ ++ pxa_nssp_output(data, TG_PINICTL,0x6); ++ mdelay(50); ++ ++ /* TG Off */ ++ gpio_set_value(TOSA_TC6393XB_TG_ON, 1); ++ mdelay(100); ++ ++ /* L3V Off */ ++ reset_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC6393XB_L3V_ON); ++} ++ ++ ++static int tosa_bl_update_status(struct backlight_device *dev) ++{ ++ struct backlight_properties *props = &dev->props; ++ struct tosa_bl_data *data = dev_get_drvdata(&dev->dev); ++ int new_power = max(props->power, props->fb_blank); ++ ++ tosa_set_backlight(data, props->brightness); ++ ++ if (new_power) ++ tosa_lcd_tg_off(data); ++ else ++ tosa_lcd_tg_on(data); ++ ++ return 0; ++} ++ ++static int tosa_bl_get_brightness(struct backlight_device *dev) ++{ ++ struct backlight_properties *props = &dev->props; ++ ++ return props->brightness; ++} ++ ++static struct backlight_ops tosa_bl_ops = { ++ .get_brightness = tosa_bl_get_brightness, ++ .update_status = tosa_bl_update_status, ++}; ++ ++static int tosa_bl_detect_client(struct i2c_adapter *adapter, int address, ++ int kind) ++{ ++ int err = 0; ++ struct i2c_client *client; ++ struct tosa_bl_data *data; ++ ++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA )) ++ goto out; ++ ++ if (!(data = kzalloc(sizeof(struct tosa_bl_data), GFP_KERNEL))) { ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ client = &data->client; ++ i2c_set_clientdata(client, data); ++ ++ client->addr = address; ++ client->adapter = adapter; ++ client->driver = &tosa_bl_driver; ++ ++ strlcpy(client->name, "tosa_bl", I2C_NAME_SIZE); ++ ++ spin_lock_init(&data->nssp_lock); ++ data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj; ++ ++ err = gpio_request(TOSA_TC6393XB_BL_C20MA, "backlight"); ++ if (err) { ++ dev_dbg(&data->bl_dev->dev, "Unable to request gpio!\n"); ++ goto err_gpio_bl; ++ } ++ ++ err = gpio_request(TOSA_TC6393XB_TG_ON, "tg"); ++ if (err) { ++ dev_dbg(&data->bl_dev->dev, "Unable to request gpio!\n"); ++ goto err_gpio_tg; ++ } ++ ++ err = ssp_init(&data->nssp_dev,2,0); ++ if (err) { ++ dev_err(&data->bl_dev->dev, "Unable to register NSSP handler!\n"); ++ goto err_ssp_init; ++ } ++ ++ /* Tell the i2c layer a new client has arrived */ ++ err = i2c_attach_client(client); ++ if (err) ++ goto err_i2c_attach; ++ ++ gpio_direction_output(TOSA_TC6393XB_BL_C20MA, 0); ++ gpio_direction_output(TOSA_TC6393XB_TG_ON, 1); ++ ++ tosa_lcd_tg_init(data); ++ ++ data->bl_dev = backlight_device_register("tosa_bl", ++ &client->dev, data, &tosa_bl_ops); ++ if (err) ++ goto err_bl_register; ++ ++ data->bl_dev->props.brightness = 69; ++ data->bl_dev->props.max_brightness = 255; ++ data->bl_dev->props.power = FB_BLANK_UNBLANK; ++ backlight_update_status(data->bl_dev); ++ ++ ++ return 0; ++ ++err_bl_register: ++ tosa_set_backlight(data, 0); ++ tosa_lcd_tg_off(data); ++ ++ err = i2c_detach_client(client); ++ if (err) ++ return err; ++err_i2c_attach: ++ ssp_exit(&data->nssp_dev); ++err_ssp_init: ++ gpio_free(TOSA_TC6393XB_TG_ON); ++err_gpio_tg: ++ gpio_free(TOSA_TC6393XB_BL_C20MA); ++err_gpio_bl: ++ kfree(data); ++out: ++ return err; ++} ++ ++static int tosa_bl_detach_client(struct i2c_client *client) ++{ ++ int err = 0; ++ struct tosa_bl_data *data = i2c_get_clientdata(client); ++ ++ backlight_device_unregister(data->bl_dev); ++ ++ tosa_set_backlight(data, 0); ++ tosa_lcd_tg_off(data); ++ ++ /* Try to detach the client from i2c space */ ++ if ((err = i2c_detach_client(client))) ++ return err; ++ ++ ssp_exit(&data->nssp_dev); ++ ++ gpio_free(TOSA_TC6393XB_TG_ON); ++ gpio_free(TOSA_TC6393XB_BL_C20MA); ++ ++ kfree(data); ++ ++ return err; ++} ++ ++#ifdef CONFIG_PM ++static int tosa_bl_suspend(struct i2c_client *client, pm_message_t mesg) ++{ ++ struct tosa_bl_data *data = i2c_get_clientdata(client); ++ ++ tosa_lcd_tg_off(data); ++ ssp_flush(&data->nssp_dev); ++ ssp_save_state(&data->nssp_dev,&data->nssp_state); ++ ++ return 0; ++} ++ ++static int tosa_bl_resume(struct i2c_client *client) ++{ ++ struct tosa_bl_data *data = i2c_get_clientdata(client); ++ ++ ssp_restore_state(&data->nssp_dev,&data->nssp_state); ++ ssp_enable(&data->nssp_dev); ++ tosa_bl_update_status(data->bl_dev); ++ ++ return 0; ++} ++#else ++#define tosa_bl_suspend NULL ++#define tosa_bl_resume NULL ++#endif ++ ++static int tosa_bl_attach_adapter(struct i2c_adapter *adapter) ++{ ++ return i2c_probe(adapter, &addr_data, &tosa_bl_detect_client); ++} ++ ++static struct i2c_driver tosa_bl_driver = { ++ .driver = { ++ .name = "tosa_bl", ++ }, ++ ++ .attach_adapter = tosa_bl_attach_adapter, ++ .detach_client = tosa_bl_detach_client, ++ ++ .suspend = tosa_bl_suspend, ++ .resume = tosa_bl_resume, ++}; ++ ++static int __init tosa_bl_init(void) ++{ ++ return i2c_add_driver(&tosa_bl_driver); ++} ++ ++static void __exit tosa_bl_cleanup (void) ++{ ++ i2c_del_driver(&tosa_bl_driver); ++} ++ ++module_init(tosa_bl_init); ++module_exit(tosa_bl_cleanup); ++ ++MODULE_DESCRIPTION("Tosa LCD device"); ++MODULE_AUTHOR("Dirk Opfer, Dmitry Baryshkov"); ++MODULE_LICENSE("GPL v2"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0053-sound-soc-codecs-wm9712.c-28.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0053-sound-soc-codecs-wm9712.c-28.patch new file mode 100644 index 0000000000..0675342508 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0053-sound-soc-codecs-wm9712.c-28.patch @@ -0,0 +1,56 @@ +From 47616d22f8f303dfd66cf3b9125af212194a0f3c Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 9 Jan 2008 02:08:17 +0300 +Subject: [PATCH 53/64] sound/soc/codecs/wm9712.c | 28 ++++++++++++++++++---------- + 1 file changed, 18 insertions(+), 10 deletions(-) + +Index: git/sound/soc/codecs/wm9712.c +=================================================================== +--- + sound/soc/codecs/wm9712.c | 28 ++++++++++++++++++---------- + 1 files changed, 18 insertions(+), 10 deletions(-) + +diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c +index 986b5d5..dfb31e1 100644 +--- a/sound/soc/codecs/wm9712.c ++++ b/sound/soc/codecs/wm9712.c +@@ -606,18 +606,26 @@ static int wm9712_dapm_event(struct snd_soc_codec *codec, int event) + + static int wm9712_reset(struct snd_soc_codec *codec, int try_warm) + { +- if (try_warm && soc_ac97_ops.warm_reset) { +- soc_ac97_ops.warm_reset(codec->ac97); +- if (!(ac97_read(codec, 0) & 0x8000)) +- return 1; +- } ++ int retry = 3; + +- soc_ac97_ops.reset(codec->ac97); +- if (ac97_read(codec, 0) & 0x8000) +- goto err; +- return 0; ++ while (retry--) ++ { ++ if(try_warm && soc_ac97_ops.warm_reset) { ++ soc_ac97_ops.warm_reset(codec->ac97); ++ if(ac97_read(codec, 0) & 0x8000) ++ continue; ++ else ++ return 1; ++ } ++ ++ soc_ac97_ops.reset(codec->ac97); ++ if(ac97_read(codec, 0) & 0x8000) ++ continue; ++ else ++ return 0; ++ ++ } + +-err: + printk(KERN_ERR "WM9712 AC97 reset failed\n"); + return -EIO; + } +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0054-sound-soc-codecs-wm9712.c-2.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0054-sound-soc-codecs-wm9712.c-2.patch new file mode 100644 index 0000000000..be7300ab24 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0054-sound-soc-codecs-wm9712.c-2.patch @@ -0,0 +1,28 @@ +From 08fbae2307163b3f0c3b704c4b00a9447752a45e Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Thu, 10 Jan 2008 17:56:58 +0300 +Subject: [PATCH 54/64] sound/soc/codecs/wm9712.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +Index: git/sound/soc/codecs/wm9712.c +=================================================================== +--- + sound/soc/codecs/wm9712.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c +index dfb31e1..a3d9f96 100644 +--- a/sound/soc/codecs/wm9712.c ++++ b/sound/soc/codecs/wm9712.c +@@ -647,7 +647,7 @@ static int wm9712_soc_resume(struct platform_device *pdev) + int i, ret; + u16 *cache = codec->reg_cache; + +- ret = wm9712_reset(codec, 1); ++ ret = wm9712_reset(codec, 0); + if (ret < 0){ + printk(KERN_ERR "could not reset AC97 codec\n"); + return ret; +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0055-Add-GPIO_POWERON-to-the-list-of-devices-that-we-supp.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0055-Add-GPIO_POWERON-to-the-list-of-devices-that-we-supp.patch new file mode 100644 index 0000000000..5bf691cbda --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0055-Add-GPIO_POWERON-to-the-list-of-devices-that-we-supp.patch @@ -0,0 +1,30 @@ +From bee8b808445a53a7dbb6c15a27064f14dec410c5 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Sun, 20 Jan 2008 03:01:41 +0300 +Subject: [PATCH 55/64] Add GPIO_POWERON to the list of devices that we support resume on. + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/tosa.c | 6 +++--- + 1 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index 3e832dc..d1cf3dc 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -517,9 +517,9 @@ static void __init tosa_init(void) + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); + + /* setup sleep mode values */ +- PWER = 0x00000002; +- PFER = 0x00000000; +- PRER = 0x00000002; ++ PWER = BIT(TOSA_GPIO_POWERON) | BIT(TOSA_GPIO_RESET); ++ PFER = 0; ++ PRER = BIT(TOSA_GPIO_POWERON) | BIT(TOSA_GPIO_RESET); + PGSR0 = 0x00000000; + PGSR1 = 0x00FF0002; + PGSR2 = 0x00014000; +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch new file mode 100644 index 0000000000..99220f9200 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch @@ -0,0 +1,126 @@ +From e039614a0ce6df645f8fa4cbe32e4b21fe46a288 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Sun, 20 Jan 2008 02:44:03 +0300 +Subject: [PATCH 56/64] Support resetting by asserting GPIO pin + +This adds support for resetting via assertion of GPIO pin. +This e.g. is used on Sharp Zaurus SL-6000. + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/gpio.c | 43 +++++++++++++++++++++++++++++++++++++ + arch/arm/mach-pxa/pm.c | 4 +- + include/asm-arm/arch-pxa/system.h | 10 ++++++++ + 3 files changed, 55 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c +index 8638dd7..589da3b 100644 +--- a/arch/arm/mach-pxa/gpio.c ++++ b/arch/arm/mach-pxa/gpio.c +@@ -19,6 +19,7 @@ + #include + #include + #include ++#include + + #include "generic.h" + +@@ -194,4 +195,46 @@ void __init pxa_init_gpio(int gpio_nr) + pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i; + gpiochip_add(&pxa_gpio_chip[i/32].chip); + } ++ ++ if (reset_gpio < gpio_nr) ++ init_reset_gpio(); ++} ++ ++int reset_gpio = -1; ++static int __init reset_gpio_setup(char *str) ++{ ++ if (get_option(&str, &reset_gpio) != 1) { ++ printk(KERN_ERR "reset_gpio: bad value secified"); ++ return 0; ++ } ++ ++ return 1; ++} ++ ++__setup("reset_gpio=", reset_gpio_setup); ++ ++int init_reset_gpio(void) ++{ ++ int rc = 0; ++ if (reset_gpio == -1) ++ goto out; ++ ++ rc = gpio_request(reset_gpio, "reset generator"); ++ if (rc) { ++ printk(KERN_ERR "Can't request reset_gpio\n"); ++ goto out; ++ } ++ ++ rc = gpio_direction_input(reset_gpio); ++ if (rc) { ++ printk(KERN_ERR "Can't configure reset_gpio for input\n"); ++ gpio_free(reset_gpio); ++ goto out; ++ } ++ ++out: ++ if (rc) ++ reset_gpio = -1; ++ ++ return rc; + } +diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c +index a941c71..64f37e5 100644 +--- a/arch/arm/mach-pxa/pm.c ++++ b/arch/arm/mach-pxa/pm.c +@@ -40,8 +40,8 @@ int pxa_pm_enter(suspend_state_t state) + + pxa_cpu_pm_fns->save(sleep_save); + +- /* Clear sleep reset status */ +- RCSR = RCSR_SMR; ++ /* Clear reset status */ ++ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + /* before sleeping, calculate and save a checksum */ + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) +diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h +index 1d56a3e..c075018 100644 +--- a/include/asm-arm/arch-pxa/system.h ++++ b/include/asm-arm/arch-pxa/system.h +@@ -11,6 +11,7 @@ + */ + + #include ++#include + #include "hardware.h" + #include "pxa-regs.h" + +@@ -19,12 +20,21 @@ static inline void arch_idle(void) + cpu_do_idle(); + } + ++extern int reset_gpio; ++ ++int init_reset_gpio(void); + + static inline void arch_reset(char mode) + { ++ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; ++ + if (mode == 's') { + /* Jump into ROM at address 0 */ + cpu_reset(0); ++ } else if (mode == 'g' && reset_gpio != -1) { ++ /* Use GPIO reset */ ++ gpio_direction_output(reset_gpio, 0); ++ gpio_set_value(reset_gpio, 1); + } else { + /* Initialize the watchdog and let it fire */ + OWER = OWER_WME; +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0057-Clean-up-tosa-resetting.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0057-Clean-up-tosa-resetting.patch new file mode 100644 index 0000000000..441e1bba75 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0057-Clean-up-tosa-resetting.patch @@ -0,0 +1,70 @@ +From a6f03929fa4d20cef339dbed7ef5cd1e040d0548 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Sun, 20 Jan 2008 02:48:07 +0300 +Subject: [PATCH 57/64] Clean up tosa resetting + +Use new gpio-assertion reset. + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/tosa.c | 16 +++++++--------- + 1 files changed, 7 insertions(+), 9 deletions(-) + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index d1cf3dc..2b4aef7 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -41,6 +41,8 @@ + #include + #include + #include ++#include ++#include + + #include + #include +@@ -489,13 +491,7 @@ static struct platform_device *devices[] __initdata = { + + static void tosa_poweroff(void) + { +- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; +- +- pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT); +- GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET); +- +- mdelay(1000); +- arm_machine_restart('h'); ++ arm_machine_restart('g'); + } + + static void tosa_restart(char mode) +@@ -504,7 +500,7 @@ static void tosa_restart(char mode) + if((MSC0 & 0xffff0000) == 0x7ff00000) + MSC0 = (MSC0 & 0xffff) | 0x7ee00000; + +- tosa_poweroff(); ++ arm_machine_restart('g'); + } + + static void __init tosa_init(void) +@@ -512,7 +508,6 @@ static void __init tosa_init(void) + pm_power_off = tosa_poweroff; + arm_pm_restart = tosa_restart; + +- pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_TC6393XB_INT | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); + +@@ -544,6 +539,9 @@ static void __init fixup_tosa(struct machine_desc *desc, + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); ++ ++ if (reset_gpio == -1) ++ reset_gpio = TOSA_GPIO_ON_RESET; + } + + MACHINE_START(TOSA, "SHARP Tosa") +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0058-Fix-tosakbd-suspend.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0058-Fix-tosakbd-suspend.patch new file mode 100644 index 0000000000..e965857dff --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0058-Fix-tosakbd-suspend.patch @@ -0,0 +1,27 @@ +From 8b57c409802e5feef64c4bb7659570e06558c0f2 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Sun, 20 Jan 2008 02:24:43 +0300 +Subject: [PATCH 58/64] Fix tosakbd suspend + +Signed-off-by: Dmitry Baryshkov +--- + drivers/input/keyboard/tosakbd.c | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c +index 3884d1e..306cbe8 100644 +--- a/drivers/input/keyboard/tosakbd.c ++++ b/drivers/input/keyboard/tosakbd.c +@@ -210,6 +210,9 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) + + del_timer_sync(&tosakbd->timer); + ++ PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT); ++ PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT); ++ + return 0; + } + +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0059-patch-tosa-wakeup-test.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0059-patch-tosa-wakeup-test.patch new file mode 100644 index 0000000000..812b5bad41 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0059-patch-tosa-wakeup-test.patch @@ -0,0 +1,46 @@ +From 00f6e9b946d1f653fc776d71c86a1f6a7534cd1d Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Fri, 25 Jan 2008 19:16:20 +0300 +Subject: [PATCH 59/64] patch tosa-wakeup-test + +--- + arch/arm/mach-pxa/tosa.c | 18 +++++++++++++++++- + 1 files changed, 17 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index 2b4aef7..7008919 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -260,12 +260,28 @@ static struct platform_device tosakbd_device = { + }; + + static struct gpio_keys_button tosa_gpio_keys[] = { ++ /* ++ * Two following keys are directly tied to "ON" button of tosa. Why? ++ * The first one can be used as a wakeup source, the second can't: ++ * it's outside of permitted area. ++ */ ++ { ++ .type = EV_PWR, ++ .code = KEY_RESERVED, ++ .gpio = TOSA_GPIO_POWERON, ++ .desc = "Poweron", ++ .wakeup = 1, ++ .active_low = 1, ++ }, + { + .type = EV_PWR, + .code = KEY_SUSPEND, + .gpio = TOSA_GPIO_ON_KEY, + .desc = "On key", +- .wakeup = 1, ++ /* ++ * can't be used as wakeup ++ * .wakeup = 1, ++ */ + .active_low = 1, + }, + { +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0060-Add-support-for-power_supply-on-tosa.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0060-Add-support-for-power_supply-on-tosa.patch new file mode 100644 index 0000000000..f7420de040 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0060-Add-support-for-power_supply-on-tosa.patch @@ -0,0 +1,623 @@ +From f6ec15733eb55e851c8ad19c2143d425558f6044 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Mon, 4 Feb 2008 20:11:58 +0300 +Subject: [PATCH 60/64] Add support for power_supply on tosa + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/Makefile | 2 +- + arch/arm/mach-pxa/tosa_power.c | 82 +++++++ + drivers/leds/leds-tosa.c | 2 +- + drivers/power/Kconfig | 7 + + drivers/power/Makefile | 1 + + drivers/power/tosa_battery.c | 458 ++++++++++++++++++++++++++++++++++++++++ + 6 files changed, 550 insertions(+), 2 deletions(-) + create mode 100644 arch/arm/mach-pxa/tosa_power.c + create mode 100644 drivers/power/tosa_battery.c + +diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile +index f276d24..2b68254 100644 +--- a/arch/arm/mach-pxa/Makefile ++++ b/arch/arm/mach-pxa/Makefile +@@ -21,7 +21,7 @@ obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o cor + obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o + obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o + obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o +-obj-$(CONFIG_MACH_TOSA) += tosa.o ++obj-$(CONFIG_MACH_TOSA) += tosa.o tosa_power.o + obj-$(CONFIG_MACH_EM_X270) += em-x270.o + + ifeq ($(CONFIG_MACH_ZYLONITE),y) +diff --git a/arch/arm/mach-pxa/tosa_power.c b/arch/arm/mach-pxa/tosa_power.c +new file mode 100644 +index 0000000..61ca7dc +--- /dev/null ++++ b/arch/arm/mach-pxa/tosa_power.c +@@ -0,0 +1,82 @@ ++/* ++ * Battery and Power Management code for the Sharp SL-6000x ++ * ++ * Copyright (c) 2005 Dirk Opfer ++ * Copyright (c) 2008 Dmitry Baryshkov ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static int tosa_power_ac_online(void) ++{ ++ return gpio_get_value(TOSA_GPIO_AC_IN) == 0; ++} ++ ++static char *tosa_ac_supplied_to[] = { ++ "main-battery", ++ "backup-battery", ++ "jacket-battery", ++}; ++ ++static struct pda_power_pdata tosa_power_data = { ++ .is_ac_online = tosa_power_ac_online, ++ .supplied_to = tosa_ac_supplied_to, ++ .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to), ++}; ++ ++static struct resource tosa_power_resource[] = { ++ { ++ .name = "ac", ++ .start = gpio_to_irq(TOSA_GPIO_AC_IN), ++ .end = gpio_to_irq(TOSA_GPIO_AC_IN), ++ .flags = IORESOURCE_IRQ | ++ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ }, ++}; ++ ++static struct platform_device tosa_power_device = { ++ .name = "pda-power", ++ .id = -1, ++ .dev.platform_data = &tosa_power_data, ++ .resource = tosa_power_resource, ++ .num_resources = ARRAY_SIZE(tosa_power_resource), ++}; ++ ++static int __init tosa_power_init(void) ++{ ++ int ret = gpio_request(TOSA_GPIO_AC_IN, "ac"); ++ if (ret) ++ goto err_gpio_req; ++ ++ ret = gpio_direction_input(TOSA_GPIO_AC_IN); ++ if (ret) ++ goto err_gpio_in; ++ ++ return platform_device_register(&tosa_power_device); ++ ++err_gpio_in: ++ gpio_free(TOSA_GPIO_AC_IN); ++err_gpio_req: ++ return ret; ++} ++ ++static void __exit tosa_power_exit(void) ++{ ++ platform_device_unregister(&tosa_power_device); ++ gpio_free(TOSA_GPIO_AC_IN); ++} ++ ++module_init(tosa_power_init); ++module_exit(tosa_power_exit); +diff --git a/drivers/leds/leds-tosa.c b/drivers/leds/leds-tosa.c +index fb2416a..b4498b5 100644 +--- a/drivers/leds/leds-tosa.c ++++ b/drivers/leds/leds-tosa.c +@@ -46,7 +46,7 @@ static void tosaled_green_set(struct led_classdev *led_cdev, + + static struct led_classdev tosa_amber_led = { + .name = "tosa:amber", +- .default_trigger = "sharpsl-charge", ++ .default_trigger = "main-battery-charging", + .brightness_set = tosaled_amber_set, + }; + +diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig +index 58c806e..e3a9c37 100644 +--- a/drivers/power/Kconfig ++++ b/drivers/power/Kconfig +@@ -49,4 +49,11 @@ config BATTERY_OLPC + help + Say Y to enable support for the battery on the OLPC laptop. + ++config BATTERY_TOSA ++ tristate "Sharp SL-6000 (tosa) battery" ++ depends on MACH_TOSA && MFD_TC6393XB ++ help ++ Say Y to enable support for the battery on the Sharp Zaurus ++ SL-6000 (tosa) models. ++ + endif # POWER_SUPPLY +diff --git a/drivers/power/Makefile b/drivers/power/Makefile +index 6413ded..1e408fa 100644 +--- a/drivers/power/Makefile ++++ b/drivers/power/Makefile +@@ -20,3 +20,4 @@ obj-$(CONFIG_APM_POWER) += apm_power.o + obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o + obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o + obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o ++obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o +diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c +new file mode 100644 +index 0000000..b0fd2f2 +--- /dev/null ++++ b/drivers/power/tosa_battery.c +@@ -0,0 +1,458 @@ ++/* ++ * Battery and Power Management code for the Sharp SL-6000x ++ * ++ * Copyright (c) 2005 Dirk Opfer ++ * Copyright (c) 2008 Dmitry Baryshkov ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#define BAT_TO_VOLTS(v) ((v) * 1000000 / 414) ++#define BU_TO_VOLTS(v) ((v) * 1000000 / 1266) ++/* ++ * It's pretty strange value, but that's roughly what I get from ++ * zaurus maintainer menu ++ */ ++//#define BAT_TO_TEMP(t) ((t) * 10000/2000) ++#define BAT_TO_TEMP(t) (t) ++ ++static DEFINE_MUTEX(bat_lock); /* protects gpio pins */ ++static struct work_struct bat_work; ++ ++struct tosa_bat { ++ int status; ++ struct power_supply psy; ++ int full_chrg; ++ ++ struct mutex work_lock; /* protects data */ ++ bool (*is_present)(struct tosa_bat *bat); ++ int gpio_full; ++ int gpio_charge_off; ++ int gpio_bat; ++ int adc_bat; ++ int gpio_temp; ++ int adc_temp; ++}; ++ ++static struct tosa_bat tosa_bat_main; ++static struct tosa_bat tosa_bat_jacket; ++ ++static enum power_supply_property tosa_bat_main_props[] = { ++ POWER_SUPPLY_PROP_STATUS, ++ POWER_SUPPLY_PROP_TECHNOLOGY, ++ POWER_SUPPLY_PROP_VOLTAGE_NOW, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX, ++ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, ++ POWER_SUPPLY_PROP_TEMP, ++ POWER_SUPPLY_PROP_PRESENT, ++}; ++ ++static enum power_supply_property tosa_bat_bu_props[] = { ++ POWER_SUPPLY_PROP_STATUS, ++ POWER_SUPPLY_PROP_TECHNOLOGY, ++ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, ++ POWER_SUPPLY_PROP_VOLTAGE_NOW, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, ++ POWER_SUPPLY_PROP_PRESENT, ++}; ++ ++static unsigned long tosa_read_bat(struct tosa_bat *bat) ++{ ++ unsigned long value = 0; ++ ++ if (bat->gpio_bat < 0 || bat->adc_bat < 0) ++ return 0; ++ ++ mutex_lock(&bat_lock); ++ gpio_set_value(bat->gpio_bat, 1); ++ mdelay(5); ++ value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, bat->adc_bat); ++ gpio_set_value(bat->gpio_bat, 0); ++ mutex_unlock(&bat_lock); ++ return value; ++} ++ ++static unsigned long tosa_read_temp(struct tosa_bat *bat) ++{ ++ unsigned long value = 0; ++ ++ if (bat->gpio_temp < 0 || bat->adc_temp < 0) ++ return 0; ++ ++ mutex_lock(&bat_lock); ++ gpio_set_value(bat->gpio_temp, 1); ++ mdelay(5); ++ value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, bat->adc_temp); ++ gpio_set_value(bat->gpio_temp, 0); ++ mutex_unlock(&bat_lock); ++ return value; ++} ++ ++static int tosa_bat_get_property(struct power_supply *psy, ++ enum power_supply_property psp, ++ union power_supply_propval *val) ++{ ++ int ret = 0; ++ struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy); ++ ++ if (bat->is_present && !bat->is_present(bat) ++ && psp != POWER_SUPPLY_PROP_PRESENT) { ++ return -ENODEV; ++ } ++ ++ switch (psp) { ++ case POWER_SUPPLY_PROP_STATUS: ++ val->intval = bat->status; ++ break; ++ case POWER_SUPPLY_PROP_TECHNOLOGY: ++ val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO; ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_NOW: ++ val->intval = BAT_TO_VOLTS(tosa_read_bat(bat)); ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_MAX: ++ if (bat->full_chrg == -1) ++ val->intval = -1; ++ else ++ val->intval = BAT_TO_VOLTS(bat->full_chrg); ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: ++ val->intval = BAT_TO_VOLTS(1551); ++ break; ++ case POWER_SUPPLY_PROP_TEMP: ++ val->intval = BAT_TO_TEMP(tosa_read_temp(bat)); ++ break; ++ case POWER_SUPPLY_PROP_PRESENT: ++ val->intval = bat->is_present ? bat->is_present(bat) : 1; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ return ret; ++} ++ ++static int tosa_bu_get_property(struct power_supply *psy, ++ enum power_supply_property psp, ++ union power_supply_propval *val) ++{ ++ int ret = 0; ++ struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy); ++ ++ switch (psp) { ++ case POWER_SUPPLY_PROP_STATUS: ++ val->intval = POWER_SUPPLY_STATUS_UNKNOWN; ++ break; ++ case POWER_SUPPLY_PROP_TECHNOLOGY: ++ val->intval = POWER_SUPPLY_TECHNOLOGY_LiMn; ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: ++ val->intval = 0; ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: ++ val->intval = 3 * 1000000; /* 3 V */ ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_NOW: ++ /* I think so */ ++ val->intval = BU_TO_VOLTS(tosa_read_bat(bat)); ++ break; ++ case POWER_SUPPLY_PROP_PRESENT: ++ val->intval = 1; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ return ret; ++} ++ ++static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) { ++ // FIXME ++ return 1; ++} ++ ++static void tosa_bat_external_power_changed(struct power_supply *psy) ++{ ++ schedule_work(&bat_work); ++} ++ ++static irqreturn_t tosa_bat_full_isr(int irq, void *data) ++{ ++ printk(KERN_ERR "bat_full irq: %d\n", gpio_get_value(irq_to_gpio(irq))); ++ schedule_work(&bat_work); ++ return IRQ_HANDLED; ++} ++ ++static void tosa_bat_update(struct tosa_bat *bat) ++{ ++ int old = bat->status; ++ struct power_supply *psy = &bat->psy; ++ ++ mutex_lock(&bat->work_lock); ++ ++ if (bat->is_present && !bat->is_present(bat)) { ++ printk(KERN_DEBUG "%s not present\n", psy->name); ++ bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING; ++ bat->full_chrg = -1; ++ } else if (power_supply_am_i_supplied(psy)) { ++ if (gpio_get_value(bat->gpio_full)) { ++ printk(KERN_DEBUG "%s full\n", psy->name); ++ ++ if (old == POWER_SUPPLY_STATUS_CHARGING || bat->full_chrg == -1) ++ bat->full_chrg = tosa_read_bat(bat); ++ ++ gpio_set_value(bat->gpio_charge_off, 1); ++ bat->status = POWER_SUPPLY_STATUS_FULL; ++ } else { ++ printk(KERN_ERR "%s charge\n", psy->name); ++ gpio_set_value(bat->gpio_charge_off, 0); ++ bat->status = POWER_SUPPLY_STATUS_CHARGING; ++ } ++ } else { ++ printk(KERN_ERR "%s discharge\n", psy->name); ++ gpio_set_value(bat->gpio_charge_off, 1); ++ bat->status = POWER_SUPPLY_STATUS_DISCHARGING; ++ } ++ ++ if (old != bat->status) ++ power_supply_changed(psy); ++ ++ mutex_unlock(&bat->work_lock); ++} ++ ++static void tosa_bat_work(struct work_struct *work) ++{ ++ tosa_bat_update(&tosa_bat_main); ++ tosa_bat_update(&tosa_bat_jacket); ++} ++ ++ ++static struct tosa_bat tosa_bat_main = { ++ .status = POWER_SUPPLY_STATUS_UNKNOWN, ++ .full_chrg = -1, ++ .psy = { ++ .name = "main-battery", ++ .type = POWER_SUPPLY_TYPE_BATTERY, ++ .properties = tosa_bat_main_props, ++ .num_properties = ARRAY_SIZE(tosa_bat_main_props), ++ .get_property = tosa_bat_get_property, ++ .external_power_changed = tosa_bat_external_power_changed, ++ .use_for_apm = 1, ++ }, ++ ++ .gpio_full = TOSA_GPIO_BAT0_CRG, ++ .gpio_charge_off = TOSA_TC6393XB_CHARGE_OFF, ++ .gpio_bat = TOSA_TC6393XB_BAT0_V_ON, ++ .adc_bat = WM97XX_AUX_ID3, ++ .gpio_temp = TOSA_TC6393XB_BAT1_TH_ON, ++ .adc_temp = WM97XX_AUX_ID2, ++}; ++ ++static struct tosa_bat tosa_bat_jacket = { ++ .status = POWER_SUPPLY_STATUS_UNKNOWN, ++ .full_chrg = -1, ++ .psy = { ++ .name = "jacket-battery", ++ .type = POWER_SUPPLY_TYPE_BATTERY, ++ .properties = tosa_bat_main_props, ++ .num_properties = ARRAY_SIZE(tosa_bat_main_props), ++ .get_property = tosa_bat_get_property, ++ .external_power_changed = tosa_bat_external_power_changed, ++// .use_for_apm = 1, ++ }, ++ ++ .is_present = tosa_jacket_bat_is_present, ++ .gpio_full = TOSA_GPIO_BAT1_CRG, ++ .gpio_charge_off = TOSA_TC6393XB_CHARGE_OFF_JC, ++ .gpio_bat = TOSA_TC6393XB_BAT1_V_ON, ++ .adc_bat = WM97XX_AUX_ID3, ++ .gpio_temp = TOSA_TC6393XB_BAT0_TH_ON, ++ .adc_temp = WM97XX_AUX_ID2, ++}; ++ ++static struct tosa_bat tosa_bat_bu = { ++ .status = POWER_SUPPLY_STATUS_UNKNOWN, ++ .full_chrg = -1, ++ ++ .psy = { ++ .name = "backup-battery", ++ .type = POWER_SUPPLY_TYPE_BATTERY, ++ .properties = tosa_bat_bu_props, ++ .num_properties = ARRAY_SIZE(tosa_bat_bu_props), ++ .get_property = tosa_bu_get_property, ++ .external_power_changed = tosa_bat_external_power_changed, ++ }, ++ ++ .gpio_full = -1, ++ .gpio_charge_off = -1, ++ .gpio_bat = TOSA_TC6393XB_BU_CHRG_ON, ++ .adc_bat = WM97XX_AUX_ID4, ++ .gpio_temp = -1, ++ .adc_temp = -1, ++}; ++ ++static struct { ++ int gpio; ++ char *name; ++ bool output; ++ int value; ++} gpios[] = { ++ { TOSA_TC6393XB_CHARGE_OFF, "main charge off", 1, 1 }, ++ { TOSA_TC6393XB_CHARGE_OFF_JC, "jacket charge off", 1, 1 }, ++ { TOSA_TC6393XB_BAT_SW_ON, "battery switch", 1, 0 }, ++ { TOSA_TC6393XB_BAT0_V_ON, "main battery", 1, 0 }, ++ { TOSA_TC6393XB_BAT1_V_ON, "jacket battery", 1, 0 }, ++ { TOSA_TC6393XB_BAT1_TH_ON, "main battery temp", 1, 0 }, ++ { TOSA_TC6393XB_BAT0_TH_ON, "jacket battery temp", 1, 0 }, ++ { TOSA_TC6393XB_BU_CHRG_ON, "backup battery", 1, 0 }, ++ { TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 }, ++ { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 }, ++ { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 }, ++ { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 }, ++}; ++ ++#ifdef CONFIG_PM ++static int tosa_bat_suspend(struct device *dev, pm_message_t state) ++{ ++ /* do nothing */ ++ return 0; ++} ++ ++static int tosa_bat_resume(struct device *dev) ++{ ++ schedule_work(&bat_work); ++ return 0; ++} ++#else ++#define tosa_bat_suspend NULL ++#define tosa_bat_resume NULL ++#endif ++ ++static int __devinit tosa_bat_probe(struct device *dev) ++{ ++ int ret; ++ int i; ++ ++ if (!machine_is_tosa()) ++ return -ENODEV; ++ ++ for (i = 0; i < ARRAY_SIZE(gpios); i++) { ++ ret = gpio_request(gpios[i].gpio, gpios[i].name); ++ if (ret) { ++ i --; ++ goto err_gpio; ++ } ++ ++ if (gpios[i].output) ++ ret = gpio_direction_output(gpios[i].gpio, ++ gpios[i].value); ++ else ++ ret = gpio_direction_input(gpios[i].gpio); ++ ++ if (ret) ++ goto err_gpio; ++ } ++ ++ mutex_init(&tosa_bat_main.work_lock); ++ mutex_init(&tosa_bat_jacket.work_lock); ++ ++ INIT_WORK(&bat_work, tosa_bat_work); ++ ++ ret = power_supply_register(dev, &tosa_bat_main.psy); ++ if (ret) ++ goto err_psy_reg_main; ++ ret = power_supply_register(dev, &tosa_bat_jacket.psy); ++ if (ret) ++ goto err_psy_reg_jacket; ++ ret = power_supply_register(dev, &tosa_bat_bu.psy); ++ if (ret) ++ goto err_psy_reg_bu; ++ ++ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), ++ tosa_bat_full_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ "main full", &tosa_bat_main); ++ if (ret) ++ goto err_req_main; ++ ++ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), ++ tosa_bat_full_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ "jacket full", &tosa_bat_jacket); ++ if (!ret) { ++ schedule_work(&bat_work); ++ return 0; ++ } ++ ++ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); ++err_req_main: ++ power_supply_unregister(&tosa_bat_bu.psy); ++err_psy_reg_bu: ++ power_supply_unregister(&tosa_bat_jacket.psy); ++err_psy_reg_jacket: ++ power_supply_unregister(&tosa_bat_main.psy); ++err_psy_reg_main: ++ ++ i --; ++err_gpio: ++ for (; i >= 0; i --) ++ gpio_free(gpios[i].gpio); ++ ++ return ret; ++} ++ ++static int __devexit tosa_bat_remove(struct device *dev) ++{ ++ int i; ++ ++ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); ++ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); ++ ++ power_supply_unregister(&tosa_bat_bu.psy); ++ power_supply_unregister(&tosa_bat_jacket.psy); ++ power_supply_unregister(&tosa_bat_main.psy); ++ ++ for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i --) ++ gpio_free(gpios[i].gpio); ++ ++ return 0; ++} ++ ++static struct device_driver tosa_bat_driver = { ++ .name = "wm97xx-battery", ++ .bus = &wm97xx_bus_type, ++ .owner = THIS_MODULE, ++ .probe = tosa_bat_probe, ++ .remove = __devexit_p(tosa_bat_remove), ++ .suspend = tosa_bat_suspend, ++ .resume = tosa_bat_resume, ++}; ++ ++static int __init tosa_bat_init(void) ++{ ++ return driver_register(&tosa_bat_driver); ++} ++ ++static void __exit tosa_bat_exit(void) ++{ ++ driver_unregister(&tosa_bat_driver); ++} ++ ++module_init(tosa_bat_init); ++module_exit(tosa_bat_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Dmitry Baryshkov"); ++MODULE_DESCRIPTION("Tosa battery driver"); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0061-tosa-bat-unify.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0061-tosa-bat-unify.patch new file mode 100644 index 0000000000..2bcede36a9 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0061-tosa-bat-unify.patch @@ -0,0 +1,342 @@ +From f05aa38af5bd5962ae04c4b128644e7f55451527 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Fri, 8 Feb 2008 01:14:48 +0300 +Subject: [PATCH 61/64] tosa-bat-unify + +Signed-off-by: Dmitry Baryshkov +--- + drivers/power/tosa_battery.c | 161 ++++++++++++++++++++--------------------- + 1 files changed, 79 insertions(+), 82 deletions(-) + +diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c +index b0fd2f2..008e791 100644 +--- a/drivers/power/tosa_battery.c ++++ b/drivers/power/tosa_battery.c +@@ -21,15 +21,6 @@ + #include + #include + +-#define BAT_TO_VOLTS(v) ((v) * 1000000 / 414) +-#define BU_TO_VOLTS(v) ((v) * 1000000 / 1266) +-/* +- * It's pretty strange value, but that's roughly what I get from +- * zaurus maintainer menu +- */ +-//#define BAT_TO_TEMP(t) ((t) * 10000/2000) +-#define BAT_TO_TEMP(t) (t) +- + static DEFINE_MUTEX(bat_lock); /* protects gpio pins */ + static struct work_struct bat_work; + +@@ -39,37 +30,27 @@ struct tosa_bat { + int full_chrg; + + struct mutex work_lock; /* protects data */ ++ + bool (*is_present)(struct tosa_bat *bat); + int gpio_full; + int gpio_charge_off; ++ ++ int technology; ++ + int gpio_bat; + int adc_bat; ++ int adc_bat_divider; ++ int bat_max; ++ int bat_min; ++ + int gpio_temp; + int adc_temp; ++ int adc_temp_divider; + }; + + static struct tosa_bat tosa_bat_main; + static struct tosa_bat tosa_bat_jacket; + +-static enum power_supply_property tosa_bat_main_props[] = { +- POWER_SUPPLY_PROP_STATUS, +- POWER_SUPPLY_PROP_TECHNOLOGY, +- POWER_SUPPLY_PROP_VOLTAGE_NOW, +- POWER_SUPPLY_PROP_VOLTAGE_MAX, +- POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, +- POWER_SUPPLY_PROP_TEMP, +- POWER_SUPPLY_PROP_PRESENT, +-}; +- +-static enum power_supply_property tosa_bat_bu_props[] = { +- POWER_SUPPLY_PROP_STATUS, +- POWER_SUPPLY_PROP_TECHNOLOGY, +- POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, +- POWER_SUPPLY_PROP_VOLTAGE_NOW, +- POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, +- POWER_SUPPLY_PROP_PRESENT, +-}; +- + static unsigned long tosa_read_bat(struct tosa_bat *bat) + { + unsigned long value = 0; +@@ -83,6 +64,9 @@ static unsigned long tosa_read_bat(struct tosa_bat *bat) + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, bat->adc_bat); + gpio_set_value(bat->gpio_bat, 0); + mutex_unlock(&bat_lock); ++ ++ value = value * 1000000 / bat->adc_bat_divider; ++ + return value; + } + +@@ -99,6 +83,9 @@ static unsigned long tosa_read_temp(struct tosa_bat *bat) + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, bat->adc_temp); + gpio_set_value(bat->gpio_temp, 0); + mutex_unlock(&bat_lock); ++ ++ value = value * 10000 / bat->adc_temp_divider; ++ + return value; + } + +@@ -119,22 +106,25 @@ static int tosa_bat_get_property(struct power_supply *psy, + val->intval = bat->status; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: +- val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO; ++ val->intval = bat->technology; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: +- val->intval = BAT_TO_VOLTS(tosa_read_bat(bat)); ++ val->intval = tosa_read_bat(bat); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + if (bat->full_chrg == -1) +- val->intval = -1; ++ val->intval = bat->bat_max; + else +- val->intval = BAT_TO_VOLTS(bat->full_chrg); ++ val->intval = bat->full_chrg; ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: ++ val->intval = bat->bat_max; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: +- val->intval = BAT_TO_VOLTS(1551); ++ val->intval = bat->bat_min; + break; + case POWER_SUPPLY_PROP_TEMP: +- val->intval = BAT_TO_TEMP(tosa_read_temp(bat)); ++ val->intval = tosa_read_temp(bat); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = bat->is_present ? bat->is_present(bat) : 1; +@@ -146,40 +136,6 @@ static int tosa_bat_get_property(struct power_supply *psy, + return ret; + } + +-static int tosa_bu_get_property(struct power_supply *psy, +- enum power_supply_property psp, +- union power_supply_propval *val) +-{ +- int ret = 0; +- struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy); +- +- switch (psp) { +- case POWER_SUPPLY_PROP_STATUS: +- val->intval = POWER_SUPPLY_STATUS_UNKNOWN; +- break; +- case POWER_SUPPLY_PROP_TECHNOLOGY: +- val->intval = POWER_SUPPLY_TECHNOLOGY_LiMn; +- break; +- case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: +- val->intval = 0; +- break; +- case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: +- val->intval = 3 * 1000000; /* 3 V */ +- break; +- case POWER_SUPPLY_PROP_VOLTAGE_NOW: +- /* I think so */ +- val->intval = BU_TO_VOLTS(tosa_read_bat(bat)); +- break; +- case POWER_SUPPLY_PROP_PRESENT: +- val->intval = 1; +- break; +- default: +- ret = -EINVAL; +- break; +- } +- return ret; +-} +- + static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) { + // FIXME + return 1; +@@ -241,6 +197,25 @@ static void tosa_bat_work(struct work_struct *work) + } + + ++static enum power_supply_property tosa_bat_main_props[] = { ++ POWER_SUPPLY_PROP_STATUS, ++ POWER_SUPPLY_PROP_TECHNOLOGY, ++ POWER_SUPPLY_PROP_VOLTAGE_NOW, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX, ++ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, ++ POWER_SUPPLY_PROP_TEMP, ++ POWER_SUPPLY_PROP_PRESENT, ++}; ++ ++static enum power_supply_property tosa_bat_bu_props[] = { ++ POWER_SUPPLY_PROP_STATUS, ++ POWER_SUPPLY_PROP_TECHNOLOGY, ++ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, ++ POWER_SUPPLY_PROP_VOLTAGE_NOW, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, ++ POWER_SUPPLY_PROP_PRESENT, ++}; ++ + static struct tosa_bat tosa_bat_main = { + .status = POWER_SUPPLY_STATUS_UNKNOWN, + .full_chrg = -1, +@@ -256,10 +231,18 @@ static struct tosa_bat tosa_bat_main = { + + .gpio_full = TOSA_GPIO_BAT0_CRG, + .gpio_charge_off = TOSA_TC6393XB_CHARGE_OFF, ++ ++ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, ++ + .gpio_bat = TOSA_TC6393XB_BAT0_V_ON, + .adc_bat = WM97XX_AUX_ID3, ++ .adc_bat_divider = 414, ++ .bat_max = 4310000, ++ .bat_min = 1551 * 100000 / 414, ++ + .gpio_temp = TOSA_TC6393XB_BAT1_TH_ON, + .adc_temp = WM97XX_AUX_ID2, ++ .adc_temp_divider = 10000, + }; + + static struct tosa_bat tosa_bat_jacket = { +@@ -278,10 +261,18 @@ static struct tosa_bat tosa_bat_jacket = { + .is_present = tosa_jacket_bat_is_present, + .gpio_full = TOSA_GPIO_BAT1_CRG, + .gpio_charge_off = TOSA_TC6393XB_CHARGE_OFF_JC, ++ ++ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, ++ + .gpio_bat = TOSA_TC6393XB_BAT1_V_ON, + .adc_bat = WM97XX_AUX_ID3, ++ .adc_bat_divider = 414, ++ .bat_max = 4310000, ++ .bat_min = 1551 * 100000 / 414, ++ + .gpio_temp = TOSA_TC6393XB_BAT0_TH_ON, + .adc_temp = WM97XX_AUX_ID2, ++ .adc_temp_divider = 10000, + }; + + static struct tosa_bat tosa_bat_bu = { +@@ -293,16 +284,22 @@ static struct tosa_bat tosa_bat_bu = { + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_bu_props, + .num_properties = ARRAY_SIZE(tosa_bat_bu_props), +- .get_property = tosa_bu_get_property, ++ .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .gpio_full = -1, + .gpio_charge_off = -1, ++ ++ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn, ++ + .gpio_bat = TOSA_TC6393XB_BU_CHRG_ON, + .adc_bat = WM97XX_AUX_ID4, ++ .adc_bat_divider = 1266, ++ + .gpio_temp = -1, + .adc_temp = -1, ++ .adc_temp_divider = -1, + }; + + static struct { +@@ -326,13 +323,14 @@ static struct { + }; + + #ifdef CONFIG_PM +-static int tosa_bat_suspend(struct device *dev, pm_message_t state) ++static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state) + { + /* do nothing */ ++ flush_scheduled_work(); + return 0; + } + +-static int tosa_bat_resume(struct device *dev) ++static int tosa_bat_resume(struct platform_device *dev) + { + schedule_work(&bat_work); + return 0; +@@ -342,7 +340,7 @@ static int tosa_bat_resume(struct device *dev) + #define tosa_bat_resume NULL + #endif + +-static int __devinit tosa_bat_probe(struct device *dev) ++static int __devinit tosa_bat_probe(struct platform_device *dev) + { + int ret; + int i; +@@ -372,13 +370,13 @@ static int __devinit tosa_bat_probe(struct device *dev) + + INIT_WORK(&bat_work, tosa_bat_work); + +- ret = power_supply_register(dev, &tosa_bat_main.psy); ++ ret = power_supply_register(&dev->dev, &tosa_bat_main.psy); + if (ret) + goto err_psy_reg_main; +- ret = power_supply_register(dev, &tosa_bat_jacket.psy); ++ ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy); + if (ret) + goto err_psy_reg_jacket; +- ret = power_supply_register(dev, &tosa_bat_bu.psy); ++ ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy); + if (ret) + goto err_psy_reg_bu; + +@@ -413,7 +411,7 @@ err_gpio: + return ret; + } + +-static int __devexit tosa_bat_remove(struct device *dev) ++static int __devexit tosa_bat_remove(struct platform_device *dev) + { + int i; + +@@ -430,10 +428,9 @@ static int __devexit tosa_bat_remove(struct device *dev) + return 0; + } + +-static struct device_driver tosa_bat_driver = { +- .name = "wm97xx-battery", +- .bus = &wm97xx_bus_type, +- .owner = THIS_MODULE, ++static struct platform_driver tosa_bat_driver = { ++ .driver.name = "wm97xx-battery", ++ .driver.owner = THIS_MODULE, + .probe = tosa_bat_probe, + .remove = __devexit_p(tosa_bat_remove), + .suspend = tosa_bat_suspend, +@@ -442,12 +439,12 @@ static struct device_driver tosa_bat_driver = { + + static int __init tosa_bat_init(void) + { +- return driver_register(&tosa_bat_driver); ++ return platform_driver_register(&tosa_bat_driver); + } + + static void __exit tosa_bat_exit(void) + { +- driver_unregister(&tosa_bat_driver); ++ platform_driver_unregister(&tosa_bat_driver); + } + + module_init(tosa_bat_init); +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0062-tosa-bat-fix-charging.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0062-tosa-bat-fix-charging.patch new file mode 100644 index 0000000000..e3a6b74772 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0062-tosa-bat-fix-charging.patch @@ -0,0 +1,78 @@ +From 0b9f80ab540b2e51f6e86f6a1adec67761f9368d Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Fri, 8 Feb 2008 00:50:03 +0300 +Subject: [PATCH 62/64] tosa-bat-fix-charging + +Signed-off-by: Dmitry Baryshkov +--- + drivers/power/tosa_battery.c | 28 +++++++++++++++++++++------- + 1 files changed, 21 insertions(+), 7 deletions(-) + +diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c +index 008e791..2db9116 100644 +--- a/drivers/power/tosa_battery.c ++++ b/drivers/power/tosa_battery.c +@@ -153,39 +153,53 @@ static irqreturn_t tosa_bat_full_isr(int irq, void *data) + return IRQ_HANDLED; + } + ++static char *status_text[] = { ++ [POWER_SUPPLY_STATUS_UNKNOWN] = "Unknown", ++ [POWER_SUPPLY_STATUS_CHARGING] = "Charging", ++ [POWER_SUPPLY_STATUS_DISCHARGING] = "Discharging", ++ [POWER_SUPPLY_STATUS_NOT_CHARGING] = "Not charging", ++ [POWER_SUPPLY_STATUS_FULL] = "Full", ++}; ++ + static void tosa_bat_update(struct tosa_bat *bat) + { +- int old = bat->status; ++ int old; + struct power_supply *psy = &bat->psy; + + mutex_lock(&bat->work_lock); + ++ old = bat->status; ++ + if (bat->is_present && !bat->is_present(bat)) { +- printk(KERN_DEBUG "%s not present\n", psy->name); ++ printk(KERN_NOTICE "%s not present\n", psy->name); + bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING; + bat->full_chrg = -1; + } else if (power_supply_am_i_supplied(psy)) { ++ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) { ++ gpio_set_value(bat->gpio_charge_off, 0); ++ mdelay(15); ++ } + if (gpio_get_value(bat->gpio_full)) { +- printk(KERN_DEBUG "%s full\n", psy->name); +- + if (old == POWER_SUPPLY_STATUS_CHARGING || bat->full_chrg == -1) + bat->full_chrg = tosa_read_bat(bat); + + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_FULL; + } else { +- printk(KERN_ERR "%s charge\n", psy->name); + gpio_set_value(bat->gpio_charge_off, 0); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } + } else { +- printk(KERN_ERR "%s discharge\n", psy->name); + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_DISCHARGING; + } + +- if (old != bat->status) ++ if (old != bat->status) { ++ printk(KERN_NOTICE "%s %s -> %s\n", psy->name, ++ status_text[old], ++ status_text[bat->status]); + power_supply_changed(psy); ++ } + + mutex_unlock(&bat->work_lock); + } +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0063-patch-tosa-bat-jacket-detect.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0063-patch-tosa-bat-jacket-detect.patch new file mode 100644 index 0000000000..416cae44ec --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0063-patch-tosa-bat-jacket-detect.patch @@ -0,0 +1,84 @@ +From 4ef7289137132959e3db5a1e77580ff9db185d90 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Fri, 8 Feb 2008 01:13:54 +0300 +Subject: [PATCH 63/64] patch tosa-bat-jacket-detect + +--- + drivers/power/tosa_battery.c | 21 +++++++++++++++------ + 1 files changed, 15 insertions(+), 6 deletions(-) + +diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c +index 2db9116..70beed2 100644 +--- a/drivers/power/tosa_battery.c ++++ b/drivers/power/tosa_battery.c +@@ -137,8 +137,7 @@ static int tosa_bat_get_property(struct power_supply *psy, + } + + static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) { +- // FIXME +- return 1; ++ return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0; + } + + static void tosa_bat_external_power_changed(struct power_supply *psy) +@@ -146,9 +145,9 @@ static void tosa_bat_external_power_changed(struct power_supply *psy) + schedule_work(&bat_work); + } + +-static irqreturn_t tosa_bat_full_isr(int irq, void *data) ++static irqreturn_t tosa_bat_gpio_isr(int irq, void *data) + { +- printk(KERN_ERR "bat_full irq: %d\n", gpio_get_value(irq_to_gpio(irq))); ++ printk(KERN_ERR "bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq))); + schedule_work(&bat_work); + return IRQ_HANDLED; + } +@@ -334,6 +333,7 @@ static struct { + { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 }, + { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 }, + { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 }, ++ { TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 }, + }; + + #ifdef CONFIG_PM +@@ -395,19 +395,27 @@ static int __devinit tosa_bat_probe(struct platform_device *dev) + goto err_psy_reg_bu; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), +- tosa_bat_full_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ tosa_bat_gpio_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "main full", &tosa_bat_main); + if (ret) + goto err_req_main; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), +- tosa_bat_full_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ tosa_bat_gpio_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket full", &tosa_bat_jacket); ++ if (ret) ++ goto err_req_jacket; ++ ++ ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), ++ tosa_bat_gpio_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ "jacket detect", &tosa_bat_jacket); + if (!ret) { + schedule_work(&bat_work); + return 0; + } + ++ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); ++err_req_jacket: + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); + err_req_main: + power_supply_unregister(&tosa_bat_bu.psy); +@@ -429,6 +437,7 @@ static int __devexit tosa_bat_remove(struct platform_device *dev) + { + int i; + ++ free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); + +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0064-Export-modes-via-sysfs.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0064-Export-modes-via-sysfs.patch new file mode 100644 index 0000000000..eeb92cfdd5 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0064-Export-modes-via-sysfs.patch @@ -0,0 +1,27 @@ +From feeee5d22c00d9d1e2e06eb5610740be238749b9 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Thu, 7 Feb 2008 22:27:38 +0300 +Subject: [PATCH 64/64] Export modes via sysfs + +Signed-off-by: Dmitry Baryshkov +--- + drivers/video/tmiofb.c | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c +index 6b963a1..9389a77 100644 +--- a/drivers/video/tmiofb.c ++++ b/drivers/video/tmiofb.c +@@ -800,6 +800,9 @@ static int tmiofb_probe(struct platform_device *dev) + if (retval) + goto err_set_par;*/ + ++ fb_videomode_to_modelist(data->modes, data->num_modes, ++ &info->modelist); ++ + retval = register_framebuffer(info); + if (retval < 0) + goto err_register_framebuffer; +-- +1.5.3.8 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0065-wm97xx-core-fixes.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0065-wm97xx-core-fixes.patch new file mode 100644 index 0000000000..5db0cc6ba0 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0065-wm97xx-core-fixes.patch @@ -0,0 +1,49 @@ +From 2544412fc47dc13f4f3935cb4c2fd500d217e905 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 13 Feb 2008 02:00:15 +0300 +Subject: [PATCH] wm97xx-core fixes + +Signed-off-by: Dmitry Baryshkov +--- + drivers/input/touchscreen/wm97xx-core.c | 8 ++++---- + include/linux/wm97xx.h | 1 - + 2 files changed, 4 insertions(+), 5 deletions(-) + +diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c +index 840d9ff..4cbb9e5 100644 +--- a/drivers/input/touchscreen/wm97xx-core.c ++++ b/drivers/input/touchscreen/wm97xx-core.c +@@ -596,7 +596,7 @@ static int wm97xx_probe(struct device *dev) + } + platform_set_drvdata(wm->battery_dev, wm); + wm->battery_dev->dev.parent = dev; +- ret = platform_device_register(wm->battery_dev); ++ ret = platform_device_add(wm->battery_dev); + if (ret < 0) + goto batt_reg_err; + +@@ -609,7 +609,7 @@ static int wm97xx_probe(struct device *dev) + } + platform_set_drvdata(wm->touch_dev, wm); + wm->touch_dev->dev.parent = dev; +- ret = platform_device_register(wm->touch_dev); ++ ret = platform_device_add(wm->touch_dev); + if (ret < 0) + goto touch_reg_err; + +@@ -619,10 +619,12 @@ static int wm97xx_probe(struct device *dev) + platform_device_put(wm->touch_dev); + touch_err: + platform_device_unregister(wm->battery_dev); ++ wm->battery_dev = NULL; + batt_reg_err: + platform_device_put(wm->battery_dev); + batt_err: + input_unregister_device(wm->input_dev); ++ wm->input_dev = NULL; + kfree(wm); + return ret; + } +-- +1.5.4.1 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0066-tmiofb_probe-should-be-__devinit.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0066-tmiofb_probe-should-be-__devinit.patch new file mode 100644 index 0000000000..42320be50b --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0066-tmiofb_probe-should-be-__devinit.patch @@ -0,0 +1,26 @@ +From b6a63ad546cc26519a342f3fdd7b1def49ca33ee Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 13 Feb 2008 02:00:14 +0300 +Subject: [PATCH] tmiofb_probe should be __devinit + +Signed-off-by: Dmitry Baryshkov +--- + drivers/video/tmiofb.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c +index 9389a77..958ee8a 100644 +--- a/drivers/video/tmiofb.c ++++ b/drivers/video/tmiofb.c +@@ -704,7 +704,7 @@ static irqreturn_t tmiofb_irq(int irq, void *__info) + return IRQ_HANDLED; + } + +-static int tmiofb_probe(struct platform_device *dev) ++static int __devinit tmiofb_probe(struct platform_device *dev) + { + struct mfd_cell *cell = mfd_get_cell(dev); + struct tmio_fb_data *data = cell->driver_data; +-- +1.5.4.1 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0067-modeswitching.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0067-modeswitching.patch new file mode 100644 index 0000000000..42b69d9377 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0067-modeswitching.patch @@ -0,0 +1,225 @@ +From aded2e51a7a2113dae6431c858df1d95fb312851 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Wed, 13 Feb 2008 19:34:08 +0300 +Subject: [PATCH] modeswitching + +Signed-off-by: Dmitry Baryshkov +--- + arch/arm/mach-pxa/tosa.c | 33 +++++++++++++++++++++++++++++++- + drivers/mfd/tc6393xb.c | 2 +- + drivers/video/backlight/tosa_bl.c | 38 +++++++++++++++++++++++++++++++++--- + drivers/video/tmiofb.c | 8 +++--- + include/asm-arm/arch-pxa/tosa.h | 2 + + include/linux/mfd/tc6393xb.h | 2 +- + include/linux/mfd/tmio.h | 2 +- + 7 files changed, 75 insertions(+), 12 deletions(-) + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index 94c9915..6631de2 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -455,9 +455,40 @@ static struct fb_videomode tosa_tc6393xb_lcd_mode[] = { + } + }; + ++static DEFINE_SPINLOCK(tosa_lcd_mode_lock); ++ ++static const struct fb_videomode *tosa_lcd_mode = &tosa_tc6393xb_lcd_mode[0]; ++ ++static int tosa_lcd_set_mode(struct platform_device *fb_dev, ++ const struct fb_videomode *mode) ++{ ++ int rc; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&tosa_lcd_mode_lock, flags); ++ rc = tc6393xb_lcd_mode(fb_dev, mode); ++ if (!rc) ++ tosa_lcd_mode = mode; ++ spin_unlock_irqrestore(&tosa_lcd_mode_lock, flags); ++ ++ return rc; ++} ++ ++const struct fb_videomode *tosa_lcd_get_mode(void) ++{ ++ unsigned long flags; ++ const struct fb_videomode *mode; ++ ++ spin_lock_irqsave(&tosa_lcd_mode_lock, flags); ++ mode = tosa_lcd_mode; ++ spin_unlock_irqrestore(&tosa_lcd_mode_lock, flags); ++ ++ return mode; ++} ++ + static struct tmio_fb_data tosa_tc6393xb_fb_config = { + .lcd_set_power = tc6393xb_lcd_set_power, +- .lcd_mode = tc6393xb_lcd_mode, ++ .lcd_mode = tosa_lcd_set_mode, + .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode), + .modes = &tosa_tc6393xb_lcd_mode[0], + }; +diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c +index 9001687..21190f3 100644 +--- a/drivers/mfd/tc6393xb.c ++++ b/drivers/mfd/tc6393xb.c +@@ -196,7 +196,7 @@ int tc6393xb_lcd_set_power(struct platform_device *fb, bool on) + EXPORT_SYMBOL(tc6393xb_lcd_set_power); + + int tc6393xb_lcd_mode(struct platform_device *fb_dev, +- struct fb_videomode *mode) { ++ const struct fb_videomode *mode) { + struct tc6393xb *tc6393xb = + platform_get_drvdata(to_platform_device(fb_dev->dev.parent)); + struct tc6393xb_scr __iomem *scr = tc6393xb->scr; +diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c +index 9ef0bfb..45fc6ae 100644 +--- a/drivers/video/backlight/tosa_bl.c ++++ b/drivers/video/backlight/tosa_bl.c +@@ -48,6 +48,9 @@ struct tosa_bl_data { + struct ssp_dev nssp_dev; + struct ssp_state nssp_state; + ++ /* listen for mode changes */ ++ struct notifier_block fb_notif; ++ + struct backlight_device *bl_dev; + }; + +@@ -103,14 +106,19 @@ static void tosa_lcd_tg_init(struct tosa_bl_data *data) + pxa_nssp_output(data, TG_GPOSR,0x02); /* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */ + } + +-static void tosa_lcd_tg_on(struct tosa_bl_data *data/*, const struct fb_videomode *mode*/) ++static void tosa_lcd_tg_on(struct tosa_bl_data *data) + { +- const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR; ++ const struct fb_videomode *mode = tosa_lcd_get_mode(); ++ ++ int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR; ++ ++ if (mode->yres == 640) ++ value |= TG_REG0_VQV; + + tosa_lcd_tg_init(data); + +- dev_dbg(&data->bl_dev->dev, "tosa_lcd_on\n"); +- pxa_nssp_output(data, TG_PNLCTL, value | (/*mode->yres == 320 ? 0 : */ TG_REG0_VQV)); ++ dev_dbg(&data->bl_dev->dev, "tosa_lcd_on: %04x (%d)\n", value, mode->yres); ++ pxa_nssp_output(data, TG_PNLCTL, value); + + /* TG LCD pannel power up */ + pxa_nssp_output(data, TG_PINICTL,0x4); +@@ -173,6 +181,20 @@ static struct backlight_ops tosa_bl_ops = { + .update_status = tosa_bl_update_status, + }; + ++static int fb_notifier_callback(struct notifier_block *self, ++ unsigned long event, void *_data) ++{ ++ struct tosa_bl_data *bl_data = ++ container_of(self, struct tosa_bl_data, fb_notif); ++ ++ if (event != FB_EVENT_MODE_CHANGE && event != FB_EVENT_MODE_CHANGE_ALL) ++ return 0; ++ ++ tosa_bl_update_status(bl_data->bl_dev); ++ ++ return 0; ++} ++ + static int tosa_bl_detect_client(struct i2c_adapter *adapter, int address, + int kind) + { +@@ -238,9 +260,15 @@ static int tosa_bl_detect_client(struct i2c_adapter *adapter, int address, + data->bl_dev->props.power = FB_BLANK_UNBLANK; + backlight_update_status(data->bl_dev); + ++ data->fb_notif.notifier_call = fb_notifier_callback; ++ err = fb_register_client(&data->fb_notif); ++ if (err) ++ goto err_fb_register; + + return 0; + ++err_fb_register: ++ backlight_device_unregister(data->bl_dev); + err_bl_register: + tosa_set_backlight(data, 0); + tosa_lcd_tg_off(data); +@@ -265,6 +293,8 @@ static int tosa_bl_detach_client(struct i2c_client *client) + int err = 0; + struct tosa_bl_data *data = i2c_get_clientdata(client); + ++ fb_unregister_client(&data->fb_notif); ++ + backlight_device_unregister(data->bl_dev); + + tosa_set_backlight(data, 0); +diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c +index 958ee8a..cc75df9 100644 +--- a/drivers/video/tmiofb.c ++++ b/drivers/video/tmiofb.c +@@ -618,17 +618,17 @@ static int tmiofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) + + static int tmiofb_set_par(struct fb_info *info) + { +-/* struct fb_var_screeninfo *var = &info->var; ++ struct fb_var_screeninfo *var = &info->var; + struct fb_videomode *mode; + + mode = tmiofb_find_mode(info, var); + if (!mode) + return -EINVAL; + +- if (info->mode == mode) +- return 0; ++/* if (info->mode == mode) ++ return 0;*/ + +- info->mode = mode; */ ++ info->mode = mode; + info->fix.line_length = info->mode->xres * 2; + + tmiofb_hw_mode(to_platform_device(info->device)); +diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h +index 410fa9a..624c636 100644 +--- a/include/asm-arm/arch-pxa/tosa.h ++++ b/include/asm-arm/arch-pxa/tosa.h +@@ -230,4 +230,6 @@ extern struct platform_device tosascoop_device; + #define TOSA_KEY_MAIL KEY_MAIL + #endif + ++const struct fb_videomode *tosa_lcd_get_mode(void); ++ + #endif /* _ASM_ARCH_TOSA_H_ */ +diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h +index 97c4c7c..8ab9e91 100644 +--- a/include/linux/mfd/tc6393xb.h ++++ b/include/linux/mfd/tc6393xb.h +@@ -53,7 +53,7 @@ struct tc6393xb_platform_data { + + extern int tc6393xb_lcd_set_power(struct platform_device *fb_dev, bool on); + extern int tc6393xb_lcd_mode(struct platform_device *fb_dev, +- struct fb_videomode *mode); ++ const struct fb_videomode *mode); + + /* + * Relative to irq_base +diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h +index b6d4aac..fe7ff2d 100644 +--- a/include/linux/mfd/tmio.h ++++ b/include/linux/mfd/tmio.h +@@ -19,7 +19,7 @@ struct tmio_fb_data { + int (*lcd_set_power)(struct platform_device *fb_dev, + bool on); + int (*lcd_mode)(struct platform_device *fb_dev, +- struct fb_videomode *mode); ++ const struct fb_videomode *mode); + int num_modes; + struct fb_videomode *modes; + }; +-- +1.5.4.1 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0068-Preliminary-tosa-denoiser.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0068-Preliminary-tosa-denoiser.patch new file mode 100644 index 0000000000..e90e3751c0 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/0068-Preliminary-tosa-denoiser.patch @@ -0,0 +1,239 @@ +From f7dad1cd9c1bd3fce5d228e0b644a51baea50cd9 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Fri, 15 Feb 2008 15:35:07 +0300 +Subject: [PATCH] Preliminary tosa denoiser + +Signed-off-by: Dmitry Baryshkov +--- + drivers/input/touchscreen/Kconfig | 12 ++ + drivers/input/touchscreen/Makefile | 1 + + drivers/input/touchscreen/tosa-wm97xx.c | 182 +++++++++++++++++++++++++++++++ + 3 files changed, 195 insertions(+), 0 deletions(-) + create mode 100644 drivers/input/touchscreen/tosa-wm97xx.c + +diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig +index 0be05a2..938aed2 100644 +--- a/drivers/input/touchscreen/Kconfig ++++ b/drivers/input/touchscreen/Kconfig +@@ -210,6 +210,18 @@ config TOUCHSCREEN_WM97XX_MAINSTONE + To compile this driver as a module, choose M here: the + module will be called mainstone-wm97xx + ++config TOUCHSCREEN_WM97XX_TOSA ++ tristate "WM97xx Tosa denoiser" ++ depends on TOUCHSCREEN_WM97XX && MACH_TOSA ++ help ++ Say Y here for support for touchscreen denoising on ++ Sharl Zaurus SL-6000 (tosa) system. ++ ++ If unsure, say N ++ ++ To compile this driver as a module, choose M here: the ++ module will be called tosa-wm97xx ++ + config TOUCHSCREEN_TOUCHWIN + tristate "Touchwin serial touchscreen" + select SERIO +diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile +index d38156e..d86278b 100644 +--- a/drivers/input/touchscreen/Makefile ++++ b/drivers/input/touchscreen/Makefile +@@ -23,6 +23,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o + obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o + obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o + obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o ++obj-$(CONFIG_TOUCHSCREEN_WM97XX_TOSA) += tosa-wm97xx.o + wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o + wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o + wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o +diff --git a/drivers/input/touchscreen/tosa-wm97xx.c b/drivers/input/touchscreen/tosa-wm97xx.c +new file mode 100644 +index 0000000..8fd542b +--- /dev/null ++++ b/drivers/input/touchscreen/tosa-wm97xx.c +@@ -0,0 +1,182 @@ ++/* ++ * tosa_ts.c -- Touchscreen driver for Sharp SL-6000 (Tosa). ++ * ++ * Copyright 2008 Dmitry Baryshkov ++ * Copyright 2006 Wolfson Microelectronics PLC. ++ * Author: Mike Arthur ++ * linux@wolfsonmicro.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * Revision history ++ * 1st Sep 2006 Initial version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static unsigned long hsync_time = 0; ++ ++static void calc_hsync_time(const struct fb_videomode *mode) ++{ ++ /* The 25 and 44 'magic numbers' are from Sharp's 2.4 patches */ ++ if (mode->yres == 640) { ++ hsync_time = 25; ++ } else if (mode->yres == 320) { ++ hsync_time = 44; ++ } else { ++ printk(KERN_ERR "unknown video mode res specified: %dx%d!", mode->xres, mode->yres); ++ WARN_ON(1); ++ } ++ ++ printk(KERN_ERR "tosa-wm97xx: using %lu hsync time\n", hsync_time); ++} ++ ++static int fb_notifier_callback(struct notifier_block *self, ++ unsigned long event, void *_data) ++{ ++ if (event != FB_EVENT_MODE_CHANGE && event != FB_EVENT_MODE_CHANGE_ALL) ++ return 0; ++ ++ calc_hsync_time(tosa_lcd_get_mode()); ++ ++ return 0; ++} ++ ++static void tosa_lcd_wait_hsync(void) ++{ ++ /* Waits for a rising edge on the VGA line */ ++ while (gpio_get_value(TOSA_GPIO_VGA_LINE) == 0); ++ while (gpio_get_value(TOSA_GPIO_VGA_LINE) != 0); ++} ++ ++/* Taken from the Sharp 2.4 kernel code */ ++#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a)) ++#define CCNT_ON() asm("mcr p14, 0, %0, C0, C0, 0" : : "r"(1)) ++#define CCNT_OFF() asm("mcr p14, 0, %0, C0, C0, 0" : : "r"(0)) ++ ++/* On the Sharp SL-6000 (Tosa), due to a noisy LCD, we need to perform a wait ++ * before sampling the Y axis of the touchscreen */ ++static void tosa_lcd_sync_on(int adcsel) ++{ ++ unsigned long timer1 = 0, timer2 = 0, wait_time = 0; ++ if (adcsel & WM97XX_ADCSEL_Y) { ++ CCNT_ON(); ++ wait_time = hsync_time; ++ ++ if (wait_time) { ++ ++ /* wait for LCD rising edge */ ++ tosa_lcd_wait_hsync(); ++ /* get clock */ ++ CCNT(timer1); ++ CCNT(timer2); ++ ++ while ((timer2 - timer1) < wait_time) { ++ CCNT(timer2); ++ } ++ } ++ } ++} ++ ++static void tosa_lcd_sync_off(int adcsel) ++{ ++ if (adcsel & WM97XX_ADCSEL_Y) ++ CCNT_OFF(); ++} ++ ++static struct wm97xx_mach_ops tosa_mach_ops = { ++ .pre_sample = tosa_lcd_sync_on, ++ .post_sample = tosa_lcd_sync_off, ++}; ++ ++static int __devinit tosa_ts_probe(struct platform_device *dev) { ++ struct wm97xx *wm = platform_get_drvdata(dev); ++ struct notifier_block *notif; ++ int err = -ENOMEM; ++ ++ notif = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); ++ if (!notif) ++ goto err_alloc; ++ ++ notif->notifier_call = fb_notifier_callback; ++ ++ err = gpio_request(TOSA_GPIO_VGA_LINE, "hsync"); ++ if (err) ++ goto err_gpio; ++ ++ err = gpio_direction_input(TOSA_GPIO_VGA_LINE); ++ if (err) ++ goto err_gpio; ++ ++ platform_set_drvdata(dev, notif); ++ ++ err = fb_register_client(notif); ++ if (err) ++ goto err_register; ++ ++ err = wm97xx_register_mach_ops(wm, &tosa_mach_ops); ++ if (err) ++ goto err_wm97xx; ++ ++ calc_hsync_time(tosa_lcd_get_mode()); ++ ++ return 0; ++ ++err_wm97xx: ++ fb_unregister_client(notif); ++err_register: ++ gpio_free(TOSA_GPIO_VGA_LINE); ++err_gpio: ++ kfree(notif); ++err_alloc: ++ return err; ++} ++ ++ ++static int __devexit tosa_ts_remove(struct platform_device *dev) { ++ struct wm97xx *wm = platform_get_drvdata(dev); ++ ++ wm97xx_unregister_mach_ops(wm); ++ ++ fb_unregister_client(platform_get_drvdata(dev)); ++ gpio_free(TOSA_GPIO_VGA_LINE); ++ kfree(platform_get_drvdata(dev)); ++ ++ return 0; ++} ++ ++static struct platform_driver tosa_ts_driver = { ++ .driver.name = "wm97xx-touch", ++ .driver.owner = THIS_MODULE, ++ .probe = tosa_ts_probe, ++ .remove = __devexit_p(tosa_ts_remove), ++}; ++ ++static int __init tosa_ts_init(void) ++{ ++ return platform_driver_register(&tosa_ts_driver); ++} ++ ++static void __exit tosa_ts_exit(void) ++{ ++ platform_driver_unregister(&tosa_ts_driver); ++} ++ ++module_init(tosa_ts_init); ++module_exit(tosa_ts_exit); ++ ++/* Module information */ ++MODULE_AUTHOR("Dmitry Baryshkov, Mike Arthur, mike@mikearthur.co.uk, www.wolfsonmicro.com"); ++MODULE_DESCRIPTION("Sharp SL6000 Tosa Touch Screen Denoiser"); ++MODULE_LICENSE("GPL"); +-- +1.5.4.1 + diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/defconfig b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/defconfig index 379b8bc44e..9513c418f9 100644 --- a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/defconfig +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24 -# Wed Jun 4 12:21:16 2008 +# Mon Dec 8 00:58:55 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -35,9 +35,8 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -52,15 +51,17 @@ CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_HAVE_CLOCK_LIB=y CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_UID16 is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -72,7 +73,7 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -80,12 +81,7 @@ CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -96,9 +92,9 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=m -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set @@ -141,7 +137,6 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_DMABOUNCE=y # # Intel PXA2xx/PXA3xx Implementations @@ -158,6 +153,7 @@ CONFIG_PXA_SHARPSL=y # CONFIG_MACH_ARMCORE is not set CONFIG_PXA_SHARPSL_25x=y # CONFIG_PXA_SHARPSL_27x is not set +# CONFIG_MACH_HTCUNIVERSAL is not set # CONFIG_MACH_POODLE is not set # CONFIG_MACH_CORGI is not set # CONFIG_MACH_SHEPHERD is not set @@ -246,29 +242,15 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 debug " # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y -CONFIG_CPU_FREQ_PXA25x=y # # CPU Frequency scaling # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=m -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +# CONFIG_CPU_FREQ is not set # # Floating point emulation @@ -282,8 +264,8 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set # # Power management options @@ -304,15 +286,9 @@ CONFIG_NET=y # # Networking options # -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y +# CONFIG_PACKET is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set +# CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -326,35 +302,20 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -365,66 +326,14 @@ CONFIG_NETFILTER=y # CONFIG_NETFILTER_NETLINK is not set # CONFIG_NF_CONNTRACK_ENABLED is not set # CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -446,83 +355,8 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m +# CONFIG_IRDA is not set +# CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # @@ -531,12 +365,7 @@ CONFIG_BT_HCIVHCI=m # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y # CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -626,7 +455,6 @@ CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_TMIO=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # @@ -636,10 +464,9 @@ CONFIG_MTD_NAND_TMIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -655,11 +482,10 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=m +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -677,70 +503,22 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set +# CONFIG_MD is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=m +# CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -758,47 +536,18 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set # CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_PCNET is not set # CONFIG_PCMCIA_NMCLAN is not set # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -815,10 +564,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -836,37 +582,21 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_CORGI is not set # CONFIG_KEYBOARD_SPITZ is not set +# CONFIG_SHARPSL_RC is not set CONFIG_KEYBOARD_TOSA=y # CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_CORGI is not set -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -CONFIG_TOUCHSCREEN_WM97XX=y -# CONFIG_TOUCHSCREEN_WM9705 is not set -CONFIG_TOUCHSCREEN_WM9712=y -# CONFIG_TOUCHSCREEN_WM9713 is not set -# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set -CONFIG_TOUCHSCREEN_WM97XX_TOSA=y -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports @@ -880,17 +610,13 @@ CONFIG_INPUT_UINPUT=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support @@ -902,7 +628,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set @@ -935,8 +661,6 @@ CONFIG_I2C_PXA=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support @@ -974,12 +698,7 @@ CONFIG_HAVE_GPIO_LIB=y # SPI GPIO expanders: # # CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_PDA_POWER=y -CONFIG_APM_POWER=y -# CONFIG_BATTERY_DS2760 is not set -CONFIG_BATTERY_TOSA=y +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_WATCHDOG is not set @@ -997,47 +716,15 @@ CONFIG_MFD_CORE=y # CONFIG_MFD_TC6387XB is not set CONFIG_MFD_TC6393XB=y # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set # # Multimedia devices # -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_USB_DSBR=m +# CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m +# CONFIG_DAB is not set # # Graphics support @@ -1070,7 +757,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MBX is not set # CONFIG_FB_W100 is not set CONFIG_FB_TMIO=y -CONFIG_FB_TMIO_ACCELL=y +# CONFIG_FB_TMIO_ACCELL is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -1115,23 +802,19 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m # CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # -CONFIG_SND_DUMMY=m +# CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set @@ -1141,12 +824,6 @@ CONFIG_SND_DUMMY=m # # CONFIG_SND_PXA2XX_AC97 is not set -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - # # PCMCIA devices # @@ -1172,206 +849,21 @@ CONFIG_SND_SOC_WM9712=y # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +# CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - # # USB Gadget Support # -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=m -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y @@ -1381,7 +873,7 @@ CONFIG_MMC_UNSAFE_RESUME=y # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y -CONFIG_SDIO_UART=m +# CONFIG_SDIO_UART is not set # # MMC/SD Host Controller Drivers @@ -1401,7 +893,7 @@ CONFIG_LEDS_TOSA=y # LED Triggers # CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_IDE_DISK=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set CONFIG_RTC_LIB=y @@ -1459,13 +951,10 @@ CONFIG_RTC_DRV_SA1100=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -CONFIG_FS_MBCACHE=y +CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1480,24 +969,19 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -1537,42 +1021,14 @@ CONFIG_JFFS2_RUBIN=y CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -1595,46 +1051,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m +# CONFIG_NLS is not set # CONFIG_DLM is not set # CONFIG_INSTRUMENTATION is not set @@ -1661,47 +1078,42 @@ CONFIG_FRAME_POINTER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m # CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y @@ -1709,12 +1121,12 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m +# CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tmiofb-fix-unaccel.patch b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tmiofb-fix-unaccel.patch new file mode 100644 index 0000000000..d611342170 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tmiofb-fix-unaccel.patch @@ -0,0 +1,33 @@ +Index: linux-2.6.24/drivers/video/tmiofb.c +=================================================================== +--- linux-2.6.24.orig/drivers/video/tmiofb.c 2008-12-07 22:30:26.600128369 +0300 ++++ linux-2.6.24/drivers/video/tmiofb.c 2008-12-07 22:31:42.537112538 +0300 +@@ -689,14 +689,14 @@ static irqreturn_t tmiofb_irq(int irq, v + unsigned int bbisc = ioread16(&lcr->bbisc); + + ++ iowrite16(bbisc, &lcr->bbisc); ++ ++#ifdef CONFIG_FB_TMIO_ACCELL + if (unlikely(par->use_polling && irq != -1)) { + printk(KERN_INFO "tmiofb: switching to waitq\n"); + par->use_polling = false; + } + +- iowrite16(bbisc, &lcr->bbisc); +- +-#ifdef CONFIG_FB_TMIO_ACCELL + if (bbisc & 1) + wake_up(&par->wait_acc); + #endif +@@ -972,8 +972,10 @@ static int tmiofb_suspend(struct platfor + info->fbops->fb_sync(info); + + ++#ifdef CONFIG_FB_TMIO_ACCELL + printk(KERN_INFO "tmiofb: switching to polling\n"); + par->use_polling = true; ++#endif + tmiofb_hw_stop(dev); + + if (cell->suspend) diff --git a/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tosa-bl-fixup.diff b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tosa-bl-fixup.diff new file mode 100644 index 0000000000..c4a23d1f49 --- /dev/null +++ b/packages/kexecboot/linux-kexecboot-2.6.24/tosa/tosa-bl-fixup.diff @@ -0,0 +1,103 @@ +Index: linux-2.6.24/drivers/video/backlight/tosa_bl.c +=================================================================== +--- linux-2.6.24.orig/drivers/video/backlight/tosa_bl.c 2008-11-15 22:59:51.592985003 +0300 ++++ linux-2.6.24/drivers/video/backlight/tosa_bl.c 2008-11-18 04:08:13.021416618 +0300 +@@ -76,6 +76,8 @@ static void pxa_nssp_output(struct tosa_ + + static void tosa_set_backlight(struct tosa_bl_data *data, int brightness) + { ++ pr_debug("tosa_set_backlight\n"); ++ + /* SetBacklightDuty */ + i2c_smbus_write_byte_data(&data->client, DAC_CH2, (unsigned char)brightness); + +@@ -91,7 +93,7 @@ static void tosa_set_backlight(struct to + + static void tosa_lcd_tg_init(struct tosa_bl_data *data) + { +- dev_dbg(&data->bl_dev->dev, "tosa_lcd_init\n"); ++ pr_debug("tosa_lcd_init\n"); + + /* L3V On */ + set_scoop_gpio( &tosascoop_jc_device.dev,TOSA_SCOOP_JC_TC6393XB_L3V_ON); +@@ -116,7 +118,7 @@ static void tosa_lcd_tg_on(struct tosa_b + + tosa_lcd_tg_init(data); + +- dev_dbg(&data->bl_dev->dev, "tosa_lcd_on: %04x (%d)\n", value, mode->yres); ++ pr_debug("tosa_lcd_on: %04x (%d)\n", value, mode->yres); + pxa_nssp_output(data, TG_PNLCTL, value); + + /* TG LCD pannel power up */ +@@ -129,12 +131,15 @@ static void tosa_lcd_tg_on(struct tosa_b + + /* set common voltage */ + i2c_smbus_write_byte_data(&data->client, DAC_CH1, data->comadj); ++ ++ tosa_set_backlight(data, data->bl_dev->props.brightness); ++ + } + + static void tosa_lcd_tg_off(struct tosa_bl_data *data) + { + tosa_set_backlight(data, 0); +- dev_dbg(&data->bl_dev->dev, "tosa_lcd_off\n"); ++ pr_debug("tosa_lcd_off\n"); + /* TG LCD VHSA off */ + pxa_nssp_output(data, TG_PINICTL,0x4); + mdelay(50); +@@ -158,8 +163,6 @@ static int tosa_bl_update_status(struct + struct tosa_bl_data *data = dev_get_drvdata(&dev->dev); + int new_power = max(props->power, props->fb_blank); + +- tosa_set_backlight(data, props->brightness); +- + if (new_power) + tosa_lcd_tg_off(data); + else +@@ -223,22 +226,26 @@ static int tosa_bl_detect_client(struct + + err = gpio_request(TOSA_TC6393XB_BL_C20MA, "backlight"); + if (err) { +- dev_dbg(&data->bl_dev->dev, "Unable to request gpio!\n"); ++ printk(KERN_ERR "tosa-bl; Unable to request gpio!\n"); + goto err_gpio_bl; + } + + err = gpio_request(TOSA_TC6393XB_TG_ON, "tg"); + if (err) { +- dev_dbg(&data->bl_dev->dev, "Unable to request gpio!\n"); ++ printk(KERN_ERR "tosa-bl: Unable to request gpio!\n"); + goto err_gpio_tg; + } + + err = ssp_init(&data->nssp_dev,2,0); + if (err) { +- dev_err(&data->bl_dev->dev, "Unable to register NSSP handler!\n"); ++ printk(KERN_ERR "tosa-bl: Unable to register NSSP handler!\n"); + goto err_ssp_init; + } + ++ pxa_gpio_mode(GPIO83_NSSP_TX); ++ pxa_gpio_mode(GPIO81_NSSP_CLK_OUT); ++ pxa_gpio_mode(GPIO82_NSSP_FRM_OUT); ++ + /* Tell the i2c layer a new client has arrived */ + err = i2c_attach_client(client); + if (err) +@@ -269,7 +276,6 @@ static int tosa_bl_detect_client(struct + err_fb_register: + backlight_device_unregister(data->bl_dev); + err_bl_register: +- tosa_set_backlight(data, 0); + tosa_lcd_tg_off(data); + + err = i2c_detach_client(client); +@@ -296,7 +302,6 @@ static int tosa_bl_detach_client(struct + + backlight_device_unregister(data->bl_dev); + +- tosa_set_backlight(data, 0); + tosa_lcd_tg_off(data); + + /* Try to detach the client from i2c space */ diff --git a/packages/kexecboot/linux-kexecboot_2.6.24.bb b/packages/kexecboot/linux-kexecboot_2.6.24.bb index 43913e8038..9a89b6aeb2 100644 --- a/packages/kexecboot/linux-kexecboot_2.6.24.bb +++ b/packages/kexecboot/linux-kexecboot_2.6.24.bb @@ -6,7 +6,7 @@ DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_collie = "-1" DEFAULT_PREFERENCE_poodle = "1" DEFAULT_PREFERENCE_qemux86 = "-1" -DEFAULT_PREFERENCE_tosa = "-1" +DEFAULT_PREFERENCE_tosa = "1" # Handy URLs # git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046 @@ -121,8 +121,6 @@ SRC_URI_append_tosa = "\ file://tosa/0014-tosa_udc_use_gpio_vbus.patch.patch;patch=1 \ file://tosa/0015-sharpsl-export-params.patch;patch=1 \ file://tosa/0016-This-patch-fixes-the-pxa25x-clocks-definitions-to-ad.patch;patch=1 \ - file://tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch;patch=1 \ - file://tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch;patch=1 \ file://tosa/0026-I-don-t-think-we-should-check-for-IRQs-when-determin.patch;patch=1 \ file://tosa/0027-Add-LiMn-one-of-the-most-common-for-small-non-recha.patch;patch=1 \ file://tosa/0028-Add-suspend-resume-wakeup-support-for-pda_power.patch;patch=1 \ @@ -173,7 +171,12 @@ SRC_URI_append_tosa = "\ file://tosa/0043-Use-clocklib-for-sa1100-sub-arch.patch;patch=1 \ file://tosa/0056-Support-resetting-by-asserting-GPIO-pin.patch;patch=1 \ file://tosa/0057-Clean-up-tosa-resetting.patch;patch=1 \ + file://tosa/0001-pxa2xx-ac97-switch-AC-unit-to-correct-state-before.patch;patch=1 \ + file://tosa/tosa-bl-fixup.diff;patch=1 \ + file://tosa/tmiofb-fix-unaccel.patch;patch=1 \ " +# file://tosa/0017-Convert-pxa2xx-UDC-to-use-debugfs.patch;patch=1 \ +# file://tosa/0018-Fix-the-pxa2xx_udc-to-balance-calls-to-clk_enable-cl.patch;patch=1 \ SRC_URI_append_htcuniversal ="\ file://htcuni-acx.patch;patch=1;status=external \ -- cgit 1.2.3-korg