From f599ffebf9c4133e71fb7095612e9b59de1a83ab Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Thu, 8 Jan 2009 12:41:47 +0100 Subject: linux-omap git : update to current git --- ...-New-display-subsystem-driver-for-OMAP2-3.patch | 10365 +++++++++++++++++++ ...MAPFB-fb-driver-for-new-display-subsystem.patch | 3809 +++++++ .../0003-DSS-Add-generic-DVI-panel.patch | 146 + ...cumentation-for-OMAP2-3-display-subsystem.patch | 259 - ...-New-display-subsystem-driver-for-OMAP2-3.patch | 9842 ------------------ .../0004-DSS-support-for-Beagle-Board.patch | 1605 +++ ...MAPFB-fb-driver-for-new-display-subsystem.patch | 3590 ------- ...05-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch | 156 + .../0006-DSS-Add-generic-DVI-panel.patch | 217 - .../0006-DSS-Support-for-OMAP3-SDP-board.patch | 1877 ++++ .../0007-DSS-Support-for-OMAP3-EVM-board.patch | 255 + .../0007-DSS-support-for-Beagle-Board.patch | 168 - ...DSS-BEAGLE-Enable-DSS-in-beagle-defconfig.patch | 463 - .../linux-omap/0008-DSS-Hacked-N810-support.patch | 1076 ++ ...FB-allocate-fbmem-only-for-fb0-or-if-spes.patch | 121 + ...09-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch | 155 - .../0009-DSS-support-for-OMAP3-SDP-board.patch | 261 - ...FB-remove-extra-omapfb_setup_overlay-call.patch | 29 + ...B-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch | 27 + .../0011-DSS-Support-for-OMAP3-EVM-board.patch | 288 - ...omments-to-FAKE_VSYNC-to-make-things-more.patch | 27 + ...-DSS-OMAPFB-PAGE_ALIGN-sizes-in-mem-alloc.patch | 36 - .../0013-DSS-OMAPFB-remove-extra-spaces.patch | 25 + ...nd-Cleaned-up-as-per-the-latest-Tomi-s-DS.patch | 222 - .../linux-omap/0014-DSS-fix-clk_get_usecount.patch | 67 + packages/linux/linux-omap_git.bb | 30 +- 26 files changed, 19602 insertions(+), 15514 deletions(-) create mode 100644 packages/linux/linux-omap/0001-DSS-New-display-subsystem-driver-for-OMAP2-3.patch create mode 100644 packages/linux/linux-omap/0002-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch create mode 100644 packages/linux/linux-omap/0003-DSS-Add-generic-DVI-panel.patch delete mode 100644 packages/linux/linux-omap/0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch delete mode 100644 packages/linux/linux-omap/0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch create mode 100644 packages/linux/linux-omap/0004-DSS-support-for-Beagle-Board.patch delete mode 100644 packages/linux/linux-omap/0005-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch create mode 100644 packages/linux/linux-omap/0005-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch delete mode 100644 packages/linux/linux-omap/0006-DSS-Add-generic-DVI-panel.patch create mode 100644 packages/linux/linux-omap/0006-DSS-Support-for-OMAP3-SDP-board.patch create mode 100644 packages/linux/linux-omap/0007-DSS-Support-for-OMAP3-EVM-board.patch delete mode 100644 packages/linux/linux-omap/0007-DSS-support-for-Beagle-Board.patch delete mode 100644 packages/linux/linux-omap/0008-DSS-BEAGLE-Enable-DSS-in-beagle-defconfig.patch create mode 100644 packages/linux/linux-omap/0008-DSS-Hacked-N810-support.patch create mode 100644 packages/linux/linux-omap/0009-DSS-OMAPFB-allocate-fbmem-only-for-fb0-or-if-spes.patch delete mode 100644 packages/linux/linux-omap/0009-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch delete mode 100644 packages/linux/linux-omap/0009-DSS-support-for-OMAP3-SDP-board.patch create mode 100644 packages/linux/linux-omap/0010-DSS-OMAPFB-remove-extra-omapfb_setup_overlay-call.patch create mode 100644 packages/linux/linux-omap/0011-DSS-OMAPFB-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch delete mode 100644 packages/linux/linux-omap/0011-DSS-Support-for-OMAP3-EVM-board.patch create mode 100644 packages/linux/linux-omap/0012-DSS-Add-comments-to-FAKE_VSYNC-to-make-things-more.patch delete mode 100644 packages/linux/linux-omap/0012-DSS-OMAPFB-PAGE_ALIGN-sizes-in-mem-alloc.patch create mode 100644 packages/linux/linux-omap/0013-DSS-OMAPFB-remove-extra-spaces.patch delete mode 100644 packages/linux/linux-omap/0013-Refreshed-and-Cleaned-up-as-per-the-latest-Tomi-s-DS.patch create mode 100644 packages/linux/linux-omap/0014-DSS-fix-clk_get_usecount.patch diff --git a/packages/linux/linux-omap/0001-DSS-New-display-subsystem-driver-for-OMAP2-3.patch b/packages/linux/linux-omap/0001-DSS-New-display-subsystem-driver-for-OMAP2-3.patch new file mode 100644 index 0000000000..fda5191421 --- /dev/null +++ b/packages/linux/linux-omap/0001-DSS-New-display-subsystem-driver-for-OMAP2-3.patch @@ -0,0 +1,10365 @@ +From 3128e95ff7e6a1bed47cc5c64a138cc3bbab492a Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 7 Jan 2009 14:30:09 +0200 +Subject: [PATCH] DSS: New display subsystem driver for OMAP2/3 + +Signed-off-by: Tomi Valkeinen +--- + Documentation/arm/OMAP/DSS | 266 +++ + arch/arm/plat-omap/Kconfig | 2 + + arch/arm/plat-omap/Makefile | 2 + + arch/arm/plat-omap/dss/Kconfig | 69 + + arch/arm/plat-omap/dss/Makefile | 6 + + arch/arm/plat-omap/dss/dispc.c | 2113 +++++++++++++++++++ + arch/arm/plat-omap/dss/display.c | 787 +++++++ + arch/arm/plat-omap/dss/dpi.c | 344 ++++ + arch/arm/plat-omap/dss/dsi.c | 3187 +++++++++++++++++++++++++++++ + arch/arm/plat-omap/dss/dss.c | 774 +++++++ + arch/arm/plat-omap/dss/dss.h | 274 +++ + arch/arm/plat-omap/dss/rfbi.c | 1262 ++++++++++++ + arch/arm/plat-omap/dss/sdi.c | 174 ++ + arch/arm/plat-omap/dss/venc.c | 506 +++++ + arch/arm/plat-omap/include/mach/display.h | 462 +++++ + 15 files changed, 10228 insertions(+), 0 deletions(-) + create mode 100644 Documentation/arm/OMAP/DSS + create mode 100644 arch/arm/plat-omap/dss/Kconfig + create mode 100644 arch/arm/plat-omap/dss/Makefile + create mode 100644 arch/arm/plat-omap/dss/dispc.c + create mode 100644 arch/arm/plat-omap/dss/display.c + create mode 100644 arch/arm/plat-omap/dss/dpi.c + create mode 100644 arch/arm/plat-omap/dss/dsi.c + create mode 100644 arch/arm/plat-omap/dss/dss.c + create mode 100644 arch/arm/plat-omap/dss/dss.h + create mode 100644 arch/arm/plat-omap/dss/rfbi.c + create mode 100644 arch/arm/plat-omap/dss/sdi.c + create mode 100644 arch/arm/plat-omap/dss/venc.c + create mode 100644 arch/arm/plat-omap/include/mach/display.h + +diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS +new file mode 100644 +index 0000000..a5e608c +--- /dev/null ++++ b/Documentation/arm/OMAP/DSS +@@ -0,0 +1,266 @@ ++OMAP2/3 Display Subsystem ++------------------------- ++ ++This is an almost total rewrite of the OMAP FB driver in drivers/video/omap ++(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI, ++TV-out and multiple display support. ++ ++The DSS2 driver (omap-dss module) is in arch/arm/plat-omap/dss/, and the FB, ++panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live ++currently side by side, you can choose which one to use. ++ ++Features ++-------- ++ ++Working and tested features include: ++ ++- MIPI DPI (parallel) output ++- MIPI DSI output in command mode ++- MIPI DBI (RFBI) output (not tested for a while, might've gotten broken) ++- SDI output ++- TV output ++- All pieces can be compiled as a module or inside kernel ++- Use DISPC to update any of the outputs ++- Use CPU to update RFBI or DSI output ++- OMAP DISPC planes ++- RGB16, RGB24 packed, RGB24 unpacked ++- YUV2, UYVY ++- Scaling ++- Adjusting DSS FCK to find a good pixel clock ++- Use DSI DPLL to create DSS FCK ++ ++omap-dss driver ++------------ ++ ++The DSS driver does not itself have any support for Linux framebuffer, V4L or ++such like the current ones, but it has an internal kernel API that upper level ++drivers can use. ++ ++The DSS driver models OMAP's overlays, overlay managers and displays in a ++flexible way to enable non-common multi-display configuration. In addition to ++modelling the hardware overlays, omap-dss supports virtual overlays and overlay ++managers. These can be used when updating a display with CPU or system DMA. ++ ++Panel and controller drivers ++---------------------------- ++ ++The drivers implement panel or controller specific functionality and are not ++visible to users except through omapfb driver. They register themselves to the ++DSS driver. ++ ++omapfb driver ++------------- ++ ++The omapfb driver implements arbitrary number of standard linux framebuffers. ++These framebuffers can be routed flexibly to any overlays, thus allowing very ++dynamic display architecture. ++ ++The driver exports some omapfb specific ioctls, which are compatible with the ++ioctls in the old driver. ++ ++The rest of the non standard features are exported via sysfs. Whether the final ++implementation will use sysfs, or ioctls, is still open. ++ ++V4L2 drivers ++------------ ++ ++Currently there are no V4L2 display drivers planned, but it is possible to ++implement such either to omapfb driver, or as a separate one. From omap-dss ++point of view the V4L2 drivers should be similar to framebuffer driver. ++ ++Architecture ++-------------------- ++ ++Some clarification what the different components do: ++ ++ - Framebuffer is a memory area inside OMAP's SDRAM that contains the pixel ++ data for the image. Framebuffer has width and height and color depth. ++ - Overlay defines where the pixels are read from and where they go on the ++ screen. The overlay may be smaller than framebuffer, thus displaying only ++ part of the framebuffer. The position of the overlay may be changed if ++ the overlay is smaller than the display. ++ - Overlay manager combines the overlays in to one image and feeds them to ++ display. ++ - Display is the actual physical display device. ++ ++A framebuffer can be connected to multiple overlays to show the same pixel data ++on all of the overlays. Note that in this case the overlay input sizes must be ++the same, but, in case of video overlays, the output size can be different. Any ++framebuffer can be connected to any overlay. ++ ++An overlay can be connected to one overlay manager. Also DISPC overlays can be ++connected only to DISPC overlay managers, and virtual overlays can be only ++connected to virtual overlays. ++ ++An overlay manager can be connected to one display. There are certain ++restrictions which kinds of displays an overlay manager can be connected: ++ ++ - DISPC TV overlay manager can be only connected to TV display. ++ - Virtual overlay managers can only be connected to DBI or DSI displays. ++ - DISPC LCD overlay manager can be connected to all displays, except TV ++ display. ++ ++Sysfs ++----- ++The sysfs interface is a hack, but works for testing. I don't think sysfs ++interface is the best for this in the final version, but I don't quite know ++what would be the best interfaces for these things. ++ ++In /sys/devices/platform/omapfb we have four files: framebuffers, ++overlays, managers and displays. You can read them so see the current ++setup, and change them by writing to it in the form of ++" : :..." ++ ++"framebuffers" lists all framebuffers. Its format is: ++ ++ p: ++ v: ++ s: ++ t: ++ ++"overlays" lists all overlays. Its format is: ++ ++ t: ++ x: ++ y: ++ iw: ++ ih: ++ w: ++ h: ++ e: ++ ++"managers" lists all overlay managers. Its format is: ++ ++ t: ++ ++"displays" lists all displays. Its format is: ++ ++ e: ++ u: ++ t: ++ h: ++ v: ++ p: ++ m: ++ ++There is also a debug sysfs file at /sys/devices/platform/omap-dss/clk which ++shows how DSS has configured the clocks. ++ ++Examples ++-------- ++ ++In the example scripts "omapfb" is a symlink to /sys/devices/platform/omapfb/. ++ ++Default setup on OMAP3 SDP ++-------------------------- ++ ++Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI ++and TV-out are not in use. The columns from left to right are: ++framebuffers, overlays, overlay managers, displays. Framebuffers are ++handled by omapfb, and the rest by the DSS. ++ ++FB0 --- GFX -\ DVI ++FB1 --- VID1 --+- LCD ---- LCD ++FB2 --- VID2 -/ TV ----- TV ++ ++Switch from LCD to DVI ++---------------------- ++ ++dviline=`cat omapfb/displays |grep dvi` ++w=`echo $dviline | cut -d " " -f 5 | cut -d ":" -f 2 | cut -d "/" -f 1` ++h=`echo $dviline | cut -d " " -f 6 | cut -d ":" -f 2 | cut -d "/" -f 1` ++ ++echo "lcd e:0" > omapfb/displays ++echo "lcd t:none" > omapfb/managers ++fbset -fb /dev/fb0 -xres $w -yres $h ++# at this point you have to switch the dvi/lcd dip-switch from the omap board ++echo "lcd t:dvi" > omapfb/managers ++echo "dvi e:1" > omapfb/displays ++ ++After this the configuration looks like: ++ ++FB0 --- GFX -\ -- DVI ++FB1 --- VID1 --+- LCD -/ LCD ++FB2 --- VID2 -/ TV ----- TV ++ ++Clone GFX overlay to LCD and TV ++------------------------------- ++ ++tvline=`cat /sys/devices/platform/omapfb/displays |grep tv` ++w=`echo $tvline | cut -d " " -f 5 | cut -d ":" -f 2 | cut -d "/" -f 1` ++h=`echo $tvline | cut -d " " -f 6 | cut -d ":" -f 2 | cut -d "/" -f 1` ++ ++echo "1 t:none" > omapfb/framebuffers ++echo "0 t:gfx,vid1" > omapfb/framebuffers ++echo "gfx e:1" > omapfb/overlays ++echo "vid1 t:tv w:$w h:$h e:1" > omapfb/overlays ++echo "tv e:1" > omapfb/displays ++ ++After this the configuration looks like (only relevant parts shown): ++ ++FB0 +-- GFX ---- LCD ---- LCD ++ \- VID1 ---- TV ---- TV ++ ++Misc notes ++---------- ++ ++OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator. If ++that fails, it will fall back to dma_alloc_writecombine(). ++ ++Using DSI DPLL to generate pixel clock it is possible produce the pixel clock ++of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. ++ ++Arguments ++--------- ++ ++vram ++ - Amount of total VRAM to preallocate. For example, "10M". ++ ++omapfb.video_mode ++ - Default video mode for default display. For example, ++ "800x400MR-24@60". See drivers/video/modedb.c ++ ++omapfb.vram ++ - VRAM allocated for each framebuffer. Normally omapfb allocates vram ++ depending on the display size. With this you can manually allocate ++ more. For example "4M,3M" allocates 4M for fb0, 3M for fb1. ++ ++omapfb.debug ++ - Enable debug printing. You have to have OMAPFB debug support enabled ++ in kernel config. ++ ++omap-dss.def_disp ++ - Name of default display, to which all overlays will be connected. ++ Common examples are "lcd" or "tv". ++ ++omap-dss.debug ++ - Enable debug printing. You have to have DSS debug support enabled in ++ kernel config. ++ ++TODO ++---- ++ ++DSS locking ++ ++Error checking ++- Lots of checks are missing or implemented just as BUG() ++ ++Rotate (external FB) ++Rotate (VRFB) ++Rotate (SMS) ++ ++System DMA update for DSI ++- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how ++ to skip the empty byte?) ++ ++Power management ++- Context saving ++ ++Resolution change ++- The x/y res of the framebuffer are not display resolutions, but the size ++ of the overlay. ++- The display resolution affects all planes on the display. ++ ++OMAP1 support ++- Not sure if needed ++ +diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig +index 2465aea..cd7d9e2 100644 +--- a/arch/arm/plat-omap/Kconfig ++++ b/arch/arm/plat-omap/Kconfig +@@ -245,6 +245,8 @@ config OMAP_SERIAL_WAKE + to data on the serial RX line. This allows you to wake the + system from serial console. + ++source "arch/arm/plat-omap/dss/Kconfig" ++ + endmenu + + endif +diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile +index 1259846..2740497 100644 +--- a/arch/arm/plat-omap/Makefile ++++ b/arch/arm/plat-omap/Makefile +@@ -29,3 +29,5 @@ obj-$(CONFIG_OMAP_MMU_FWK) += mmu.o + # OMAP mailbox framework + obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o + ++# OMAP2/3 Display Subsystem ++obj-y += dss/ +diff --git a/arch/arm/plat-omap/dss/Kconfig b/arch/arm/plat-omap/dss/Kconfig +new file mode 100644 +index 0000000..6b342df +--- /dev/null ++++ b/arch/arm/plat-omap/dss/Kconfig +@@ -0,0 +1,69 @@ ++config OMAP2_DSS ++ tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" ++ depends on ARCH_OMAP2 || ARCH_OMAP3 ++ help ++ OMAP2/3 Display Subsystem support. ++ ++if OMAP2_DSS ++ ++config OMAP2_DSS_DEBUG_SUPPORT ++ bool "Debug support" ++ default y ++ help ++ This enables debug messages. You need to enable printing ++ with 'debug' module parameter. ++ ++config OMAP2_DSS_RFBI ++ bool "RFBI support" ++ default y ++ ++config OMAP2_DSS_VENC ++ bool "VENC support" ++ default y ++ ++if ARCH_OMAP3 ++ ++config OMAP2_DSS_SDI ++ bool "SDI support" ++ default y ++ ++config OMAP2_DSS_DSI ++ bool "DSI support" ++ default y ++ ++endif ++ ++config OMAP2_DSS_USE_DSI_PLL ++ bool "Use DSI PLL for PCLK (EXPERIMENTAL)" ++ default n ++ depends on OMAP2_DSS_DSI ++ help ++ Use DSI PLL to generate pixel clock. ++ Currently only for DPI output. ++ ++config OMAP2_DSS_FAKE_VSYNC ++ bool "Fake VSYNC irq from manual update displays" ++ default n ++ help ++ If this is selected, DSI will fake a DISPC VSYNC interrupt ++ when DSI has sent a frame. ++ ++config OMAP2_DSS_MIN_FCK_PER_PCK ++ int "Minimum FCK/PCK ratio (for scaling)" ++ range 0 32 ++ default 0 ++ help ++ This can be used to adjust the minimum FCK/PCK ratio. ++ ++ With this you can make sure that DISPC FCK is at least ++ n x PCK. Video plane scaling requires higher FCK than ++ normally. ++ ++ If this is set to 0, there's no extra constraint on the ++ DISPC FCK. However, the FCK will at minimum be ++ 2xPCK (if active matrix) or 3xPCK (if passive matrix). ++ ++ Max FCK is 173MHz, so this doesn't work if your PCK ++ is very high. ++ ++endif +diff --git a/arch/arm/plat-omap/dss/Makefile b/arch/arm/plat-omap/dss/Makefile +new file mode 100644 +index 0000000..e98c6c1 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/Makefile +@@ -0,0 +1,6 @@ ++obj-$(CONFIG_OMAP2_DSS) += omap-dss.o ++omap-dss-y := dss.o display.o dispc.o dpi.o ++omap-dss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o ++omap-dss-$(CONFIG_OMAP2_DSS_VENC) += venc.o ++omap-dss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o ++omap-dss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o +diff --git a/arch/arm/plat-omap/dss/dispc.c b/arch/arm/plat-omap/dss/dispc.c +new file mode 100644 +index 0000000..20caa48 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dispc.c +@@ -0,0 +1,2113 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dispc.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "DISPC" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++ ++#include "dss.h" ++ ++/* DISPC */ ++#define DISPC_BASE 0x48050400 ++ ++#define DISPC_SZ_REGS SZ_1K ++ ++struct dispc_reg { u16 idx; }; ++ ++#define DISPC_REG(idx) ((const struct dispc_reg) { idx }) ++ ++/* DISPC common */ ++#define DISPC_REVISION DISPC_REG(0x0000) ++#define DISPC_SYSCONFIG DISPC_REG(0x0010) ++#define DISPC_SYSSTATUS DISPC_REG(0x0014) ++#define DISPC_IRQSTATUS DISPC_REG(0x0018) ++#define DISPC_IRQENABLE DISPC_REG(0x001C) ++#define DISPC_CONTROL DISPC_REG(0x0040) ++#define DISPC_CONFIG DISPC_REG(0x0044) ++#define DISPC_CAPABLE DISPC_REG(0x0048) ++#define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C) ++#define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050) ++#define DISPC_TRANS_COLOR0 DISPC_REG(0x0054) ++#define DISPC_TRANS_COLOR1 DISPC_REG(0x0058) ++#define DISPC_LINE_STATUS DISPC_REG(0x005C) ++#define DISPC_LINE_NUMBER DISPC_REG(0x0060) ++#define DISPC_TIMING_H DISPC_REG(0x0064) ++#define DISPC_TIMING_V DISPC_REG(0x0068) ++#define DISPC_POL_FREQ DISPC_REG(0x006C) ++#define DISPC_DIVISOR DISPC_REG(0x0070) ++#define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074) ++#define DISPC_SIZE_DIG DISPC_REG(0x0078) ++#define DISPC_SIZE_LCD DISPC_REG(0x007C) ++ ++/* DISPC GFX plane */ ++#define DISPC_GFX_BA0 DISPC_REG(0x0080) ++#define DISPC_GFX_BA1 DISPC_REG(0x0084) ++#define DISPC_GFX_POSITION DISPC_REG(0x0088) ++#define DISPC_GFX_SIZE DISPC_REG(0x008C) ++#define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0) ++#define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4) ++#define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8) ++#define DISPC_GFX_ROW_INC DISPC_REG(0x00AC) ++#define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0) ++#define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4) ++#define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8) ++ ++#define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4) ++#define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8) ++#define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC) ++ ++#define DISPC_CPR_COEF_R DISPC_REG(0x0220) ++#define DISPC_CPR_COEF_G DISPC_REG(0x0224) ++#define DISPC_CPR_COEF_B DISPC_REG(0x0228) ++ ++#define DISPC_GFX_PRELOAD DISPC_REG(0x022C) ++ ++/* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */ ++#define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx) ++ ++#define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000) ++#define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004) ++#define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008) ++#define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C) ++#define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010) ++#define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014) ++#define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018) ++#define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C) ++#define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020) ++#define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024) ++#define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028) ++#define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C) ++#define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030) ++ ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8) ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8) ++/* coef index i = {0, 1, 2, 3, 4} */ ++#define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4) ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_V(n, i) DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4) ++ ++#define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04) ++ ++ ++#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_OCP_ERR | \ ++ DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_SYNC_LOST | \ ++ DISPC_IRQ_SYNC_LOST_DIGIT) ++ ++#define DISPC_MAX_NR_ISRS 8 ++ ++static struct { ++ omap_dispc_isr_t isr; ++ void *arg; ++ u32 mask; ++} registered_isr[DISPC_MAX_NR_ISRS]; ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dispc_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) ++ ++static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, ++ DISPC_VID_ATTRIBUTES(0), ++ DISPC_VID_ATTRIBUTES(1) }; ++ ++static struct { ++ void __iomem *base; ++ ++ struct clk *dpll4_m4_ck; ++ ++ spinlock_t irq_lock; ++ ++ unsigned long cache_req_pck; ++ unsigned long cache_prate; ++ struct dispc_clock_info cache_cinfo; ++ ++ u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; ++} dispc; ++ ++static inline void dispc_write_reg(const struct dispc_reg idx, u32 val) ++{ ++ __raw_writel(val, dispc.base + idx.idx); ++} ++ ++static inline u32 dispc_read_reg(const struct dispc_reg idx) ++{ ++ return __raw_readl(dispc.base + idx.idx); ++} ++ ++#define SR(reg) \ ++ dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg) ++#define RR(reg) \ ++ dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)]) ++ ++void dispc_save_context(void) ++{ ++ if (cpu_is_omap24xx()) ++ return; ++ ++ SR(SYSCONFIG); ++ SR(IRQENABLE); ++ SR(CONTROL); ++ SR(CONFIG); ++ SR(DEFAULT_COLOR0); ++ SR(DEFAULT_COLOR1); ++ SR(TRANS_COLOR0); ++ SR(TRANS_COLOR1); ++ SR(LINE_NUMBER); ++ SR(TIMING_H); ++ SR(TIMING_V); ++ SR(POL_FREQ); ++ SR(DIVISOR); ++ SR(GLOBAL_ALPHA); ++ SR(SIZE_DIG); ++ SR(SIZE_LCD); ++ ++ SR(GFX_BA0); ++ SR(GFX_BA1); ++ SR(GFX_POSITION); ++ SR(GFX_SIZE); ++ SR(GFX_ATTRIBUTES); ++ SR(GFX_FIFO_THRESHOLD); ++ SR(GFX_ROW_INC); ++ SR(GFX_PIXEL_INC); ++ SR(GFX_WINDOW_SKIP); ++ SR(GFX_TABLE_BA); ++ ++ SR(DATA_CYCLE1); ++ SR(DATA_CYCLE2); ++ SR(DATA_CYCLE3); ++ ++ SR(CPR_COEF_R); ++ SR(CPR_COEF_G); ++ SR(CPR_COEF_B); ++ ++ SR(GFX_PRELOAD); ++ ++ /* VID1 */ ++ SR(VID_BA0(0)); ++ SR(VID_BA1(0)); ++ SR(VID_POSITION(0)); ++ SR(VID_SIZE(0)); ++ SR(VID_ATTRIBUTES(0)); ++ SR(VID_FIFO_THRESHOLD(0)); ++ SR(VID_ROW_INC(0)); ++ SR(VID_PIXEL_INC(0)); ++ SR(VID_FIR(0)); ++ SR(VID_PICTURE_SIZE(0)); ++ SR(VID_ACCU0(0)); ++ SR(VID_ACCU1(0)); ++ ++ SR(VID_FIR_COEF_H(0, 0)); ++ SR(VID_FIR_COEF_H(0, 1)); ++ SR(VID_FIR_COEF_H(0, 2)); ++ SR(VID_FIR_COEF_H(0, 3)); ++ SR(VID_FIR_COEF_H(0, 4)); ++ SR(VID_FIR_COEF_H(0, 5)); ++ SR(VID_FIR_COEF_H(0, 6)); ++ SR(VID_FIR_COEF_H(0, 7)); ++ ++ SR(VID_FIR_COEF_HV(0, 0)); ++ SR(VID_FIR_COEF_HV(0, 1)); ++ SR(VID_FIR_COEF_HV(0, 2)); ++ SR(VID_FIR_COEF_HV(0, 3)); ++ SR(VID_FIR_COEF_HV(0, 4)); ++ SR(VID_FIR_COEF_HV(0, 5)); ++ SR(VID_FIR_COEF_HV(0, 6)); ++ SR(VID_FIR_COEF_HV(0, 7)); ++ ++ SR(VID_CONV_COEF(0, 0)); ++ SR(VID_CONV_COEF(0, 1)); ++ SR(VID_CONV_COEF(0, 2)); ++ SR(VID_CONV_COEF(0, 3)); ++ SR(VID_CONV_COEF(0, 4)); ++ ++ SR(VID_FIR_COEF_V(0, 0)); ++ SR(VID_FIR_COEF_V(0, 1)); ++ SR(VID_FIR_COEF_V(0, 2)); ++ SR(VID_FIR_COEF_V(0, 3)); ++ SR(VID_FIR_COEF_V(0, 4)); ++ SR(VID_FIR_COEF_V(0, 5)); ++ SR(VID_FIR_COEF_V(0, 6)); ++ SR(VID_FIR_COEF_V(0, 7)); ++ ++ SR(VID_PRELOAD(0)); ++ ++ /* VID2 */ ++ SR(VID_BA0(1)); ++ SR(VID_BA1(1)); ++ SR(VID_POSITION(1)); ++ SR(VID_SIZE(1)); ++ SR(VID_ATTRIBUTES(1)); ++ SR(VID_FIFO_THRESHOLD(1)); ++ SR(VID_ROW_INC(1)); ++ SR(VID_PIXEL_INC(1)); ++ SR(VID_FIR(1)); ++ SR(VID_PICTURE_SIZE(1)); ++ SR(VID_ACCU0(1)); ++ SR(VID_ACCU1(1)); ++ ++ SR(VID_FIR_COEF_H(1, 0)); ++ SR(VID_FIR_COEF_H(1, 1)); ++ SR(VID_FIR_COEF_H(1, 2)); ++ SR(VID_FIR_COEF_H(1, 3)); ++ SR(VID_FIR_COEF_H(1, 4)); ++ SR(VID_FIR_COEF_H(1, 5)); ++ SR(VID_FIR_COEF_H(1, 6)); ++ SR(VID_FIR_COEF_H(1, 7)); ++ ++ SR(VID_FIR_COEF_HV(1, 0)); ++ SR(VID_FIR_COEF_HV(1, 1)); ++ SR(VID_FIR_COEF_HV(1, 2)); ++ SR(VID_FIR_COEF_HV(1, 3)); ++ SR(VID_FIR_COEF_HV(1, 4)); ++ SR(VID_FIR_COEF_HV(1, 5)); ++ SR(VID_FIR_COEF_HV(1, 6)); ++ SR(VID_FIR_COEF_HV(1, 7)); ++ ++ SR(VID_CONV_COEF(1, 0)); ++ SR(VID_CONV_COEF(1, 1)); ++ SR(VID_CONV_COEF(1, 2)); ++ SR(VID_CONV_COEF(1, 3)); ++ SR(VID_CONV_COEF(1, 4)); ++ ++ SR(VID_FIR_COEF_V(1, 0)); ++ SR(VID_FIR_COEF_V(1, 1)); ++ SR(VID_FIR_COEF_V(1, 2)); ++ SR(VID_FIR_COEF_V(1, 3)); ++ SR(VID_FIR_COEF_V(1, 4)); ++ SR(VID_FIR_COEF_V(1, 5)); ++ SR(VID_FIR_COEF_V(1, 6)); ++ SR(VID_FIR_COEF_V(1, 7)); ++ ++ SR(VID_PRELOAD(1)); ++} ++ ++void dispc_restore_context(void) ++{ ++ RR(SYSCONFIG); ++ RR(IRQENABLE); ++ /*RR(CONTROL);*/ ++ RR(CONFIG); ++ RR(DEFAULT_COLOR0); ++ RR(DEFAULT_COLOR1); ++ RR(TRANS_COLOR0); ++ RR(TRANS_COLOR1); ++ RR(LINE_NUMBER); ++ RR(TIMING_H); ++ RR(TIMING_V); ++ RR(POL_FREQ); ++ RR(DIVISOR); ++ RR(GLOBAL_ALPHA); ++ RR(SIZE_DIG); ++ RR(SIZE_LCD); ++ ++ RR(GFX_BA0); ++ RR(GFX_BA1); ++ RR(GFX_POSITION); ++ RR(GFX_SIZE); ++ RR(GFX_ATTRIBUTES); ++ RR(GFX_FIFO_THRESHOLD); ++ RR(GFX_ROW_INC); ++ RR(GFX_PIXEL_INC); ++ RR(GFX_WINDOW_SKIP); ++ RR(GFX_TABLE_BA); ++ ++ RR(DATA_CYCLE1); ++ RR(DATA_CYCLE2); ++ RR(DATA_CYCLE3); ++ ++ RR(CPR_COEF_R); ++ RR(CPR_COEF_G); ++ RR(CPR_COEF_B); ++ ++ RR(GFX_PRELOAD); ++ ++ /* VID1 */ ++ RR(VID_BA0(0)); ++ RR(VID_BA1(0)); ++ RR(VID_POSITION(0)); ++ RR(VID_SIZE(0)); ++ RR(VID_ATTRIBUTES(0)); ++ RR(VID_FIFO_THRESHOLD(0)); ++ RR(VID_ROW_INC(0)); ++ RR(VID_PIXEL_INC(0)); ++ RR(VID_FIR(0)); ++ RR(VID_PICTURE_SIZE(0)); ++ RR(VID_ACCU0(0)); ++ RR(VID_ACCU1(0)); ++ ++ RR(VID_FIR_COEF_H(0, 0)); ++ RR(VID_FIR_COEF_H(0, 1)); ++ RR(VID_FIR_COEF_H(0, 2)); ++ RR(VID_FIR_COEF_H(0, 3)); ++ RR(VID_FIR_COEF_H(0, 4)); ++ RR(VID_FIR_COEF_H(0, 5)); ++ RR(VID_FIR_COEF_H(0, 6)); ++ RR(VID_FIR_COEF_H(0, 7)); ++ ++ RR(VID_FIR_COEF_HV(0, 0)); ++ RR(VID_FIR_COEF_HV(0, 1)); ++ RR(VID_FIR_COEF_HV(0, 2)); ++ RR(VID_FIR_COEF_HV(0, 3)); ++ RR(VID_FIR_COEF_HV(0, 4)); ++ RR(VID_FIR_COEF_HV(0, 5)); ++ RR(VID_FIR_COEF_HV(0, 6)); ++ RR(VID_FIR_COEF_HV(0, 7)); ++ ++ RR(VID_CONV_COEF(0, 0)); ++ RR(VID_CONV_COEF(0, 1)); ++ RR(VID_CONV_COEF(0, 2)); ++ RR(VID_CONV_COEF(0, 3)); ++ RR(VID_CONV_COEF(0, 4)); ++ ++ RR(VID_FIR_COEF_V(0, 0)); ++ RR(VID_FIR_COEF_V(0, 1)); ++ RR(VID_FIR_COEF_V(0, 2)); ++ RR(VID_FIR_COEF_V(0, 3)); ++ RR(VID_FIR_COEF_V(0, 4)); ++ RR(VID_FIR_COEF_V(0, 5)); ++ RR(VID_FIR_COEF_V(0, 6)); ++ RR(VID_FIR_COEF_V(0, 7)); ++ ++ RR(VID_PRELOAD(0)); ++ ++ /* VID2 */ ++ RR(VID_BA0(1)); ++ RR(VID_BA1(1)); ++ RR(VID_POSITION(1)); ++ RR(VID_SIZE(1)); ++ RR(VID_ATTRIBUTES(1)); ++ RR(VID_FIFO_THRESHOLD(1)); ++ RR(VID_ROW_INC(1)); ++ RR(VID_PIXEL_INC(1)); ++ RR(VID_FIR(1)); ++ RR(VID_PICTURE_SIZE(1)); ++ RR(VID_ACCU0(1)); ++ RR(VID_ACCU1(1)); ++ ++ RR(VID_FIR_COEF_H(1, 0)); ++ RR(VID_FIR_COEF_H(1, 1)); ++ RR(VID_FIR_COEF_H(1, 2)); ++ RR(VID_FIR_COEF_H(1, 3)); ++ RR(VID_FIR_COEF_H(1, 4)); ++ RR(VID_FIR_COEF_H(1, 5)); ++ RR(VID_FIR_COEF_H(1, 6)); ++ RR(VID_FIR_COEF_H(1, 7)); ++ ++ RR(VID_FIR_COEF_HV(1, 0)); ++ RR(VID_FIR_COEF_HV(1, 1)); ++ RR(VID_FIR_COEF_HV(1, 2)); ++ RR(VID_FIR_COEF_HV(1, 3)); ++ RR(VID_FIR_COEF_HV(1, 4)); ++ RR(VID_FIR_COEF_HV(1, 5)); ++ RR(VID_FIR_COEF_HV(1, 6)); ++ RR(VID_FIR_COEF_HV(1, 7)); ++ ++ RR(VID_CONV_COEF(1, 0)); ++ RR(VID_CONV_COEF(1, 1)); ++ RR(VID_CONV_COEF(1, 2)); ++ RR(VID_CONV_COEF(1, 3)); ++ RR(VID_CONV_COEF(1, 4)); ++ ++ RR(VID_FIR_COEF_V(1, 0)); ++ RR(VID_FIR_COEF_V(1, 1)); ++ RR(VID_FIR_COEF_V(1, 2)); ++ RR(VID_FIR_COEF_V(1, 3)); ++ RR(VID_FIR_COEF_V(1, 4)); ++ RR(VID_FIR_COEF_V(1, 5)); ++ RR(VID_FIR_COEF_V(1, 6)); ++ RR(VID_FIR_COEF_V(1, 7)); ++ ++ RR(VID_PRELOAD(1)); ++ ++ /* enable last, because LCD & DIGIT enable are here */ ++ RR(CONTROL); ++} ++ ++#undef SR ++#undef RR ++ ++static inline void enable_clocks(int enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++void dispc_go(enum omap_channel channel) ++{ ++ int bit; ++ unsigned long tmo; ++ ++ enable_clocks(1); ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 0; /* LCDENABLE */ ++ else ++ bit = 1; /* DIGITALENABLE */ ++ ++ /* if the channel is not enabled, we don't need GO */ ++ if (REG_GET(DISPC_CONTROL, bit, bit) == 0) ++ goto end; ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 5; /* GOLCD */ ++ else ++ bit = 6; /* GODIGIT */ ++ ++ tmo = jiffies + msecs_to_jiffies(200); ++ while (REG_GET(DISPC_CONTROL, bit, bit) == 1) { ++ if (time_after(jiffies, tmo)) { ++ DSSERR("timeout waiting GO flag\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ ++ DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT"); ++ ++ REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); ++end: ++ enable_clocks(0); ++} ++ ++static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value); ++} ++ ++static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value); ++} ++ ++ ++static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup, ++ int vscaleup) ++{ ++ /* Coefficients for horizontal up-sampling */ ++ const u32 coef_hup[8] = { ++ 0x00800000, ++ 0x0D7CF800, ++ 0x1E70F5FF, ++ 0x335FF5FE, ++ 0xF74949F7, ++ 0xF55F33FB, ++ 0xF5701EFE, ++ 0xF87C0DFF, ++ }; ++ ++ /* Coefficients for horizontal down-sampling */ ++ const u32 coef_hdown[8] = { ++ 0x24382400, ++ 0x28371FFE, ++ 0x2C361BFB, ++ 0x303516F9, ++ 0x11343311, ++ 0x1635300C, ++ 0x1B362C08, ++ 0x1F372804, ++ }; ++ ++ /* Coefficients for horizontal and vertical up-sampling */ ++ const u32 coef_hvup[8] = { ++ 0x00800000, ++ 0x037B02FF, ++ 0x0C6F05FE, ++ 0x205907FB, ++ 0x00404000, ++ 0x075920FE, ++ 0x056F0CFF, ++ 0x027B0300, ++ }; ++ ++ /* Coefficients for horizontal and vertical down-sampling */ ++ const u32 coef_hvdown[8] = { ++ 0x24382400, ++ 0x28391F04, ++ 0x2D381B08, ++ 0x3237170C, ++ 0x123737F7, ++ 0x173732F9, ++ 0x1B382DFB, ++ 0x1F3928FE, ++ }; ++ ++ const u32 *h_coef; ++ const u32 *hv_coef; ++ const u32 *hv_coef_mod; ++ int i; ++ ++ if (hscaleup) ++ h_coef = coef_hup; ++ else ++ h_coef = coef_hdown; ++ ++ if (vscaleup) { ++ hv_coef = coef_hvup; ++ ++ if (hscaleup) ++ hv_coef_mod = NULL; ++ else ++ hv_coef_mod = coef_hvdown; ++ } else { ++ hv_coef = coef_hvdown; ++ ++ if (hscaleup) ++ hv_coef_mod = coef_hvup; ++ else ++ hv_coef_mod = NULL; ++ } ++ ++ for (i = 0; i < 8; i++) { ++ u32 h, hv; ++ ++ h = h_coef[i]; ++ ++ hv = hv_coef[i]; ++ ++ if (hv_coef_mod) { ++ hv &= 0xffffff00; ++ hv |= (hv_coef_mod[i] & 0xff); ++ } ++ ++ _dispc_write_firh_reg(plane, i, h); ++ _dispc_write_firhv_reg(plane, i, hv); ++ } ++} ++ ++static void _dispc_setup_color_conv_coef(void) ++{ ++ const struct color_conv_coef { ++ int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; ++ int full_range; ++ } ctbl_bt601_5 = { ++ 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, ++ }; ++ ++ const struct color_conv_coef *ct; ++ ++#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) ++ ++ ct = &ctbl_bt601_5; ++ ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb)); ++ ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb)); ++ ++#undef CVAL ++ ++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11); ++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11); ++} ++ ++ ++static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) ++{ ++ const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0, ++ DISPC_VID_BA0(0), ++ DISPC_VID_BA0(1) }; ++ ++ dispc_write_reg(ba0_reg[plane], paddr); ++} ++ ++static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) ++{ ++ const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1, ++ DISPC_VID_BA1(0), ++ DISPC_VID_BA1(1) }; ++ ++ dispc_write_reg(ba1_reg[plane], paddr); ++} ++ ++static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) ++{ ++ const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION, ++ DISPC_VID_POSITION(0), ++ DISPC_VID_POSITION(1) }; ++ ++ u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); ++ dispc_write_reg(pos_reg[plane], val); ++} ++ ++static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) ++{ ++ const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE, ++ DISPC_VID_PICTURE_SIZE(0), ++ DISPC_VID_PICTURE_SIZE(1) }; ++ u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ dispc_write_reg(siz_reg[plane], val); ++} ++ ++static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) ++{ ++ u32 val; ++ const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0), ++ DISPC_VID_SIZE(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ dispc_write_reg(vsi_reg[plane-1], val); ++} ++ ++static void _dispc_set_row_inc(enum omap_plane plane, int inc) ++{ ++ const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, ++ DISPC_VID_ROW_INC(0), ++ DISPC_VID_ROW_INC(1) }; ++ ++ dispc_write_reg(ri_reg[plane], inc); ++} ++ ++static void _dispc_set_color_mode(enum omap_plane plane, ++ enum omap_color_mode color_mode) ++{ ++ u32 m = 0; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_CLUT1: ++ m = 0x0; break; ++ case OMAP_DSS_COLOR_CLUT2: ++ m = 0x1; break; ++ case OMAP_DSS_COLOR_CLUT4: ++ m = 0x2; break; ++ case OMAP_DSS_COLOR_CLUT8: ++ m = 0x3; break; ++ case OMAP_DSS_COLOR_RGB12U: ++ m = 0x4; break; ++ case OMAP_DSS_COLOR_ARGB16: ++ m = 0x5; break; ++ case OMAP_DSS_COLOR_RGB16: ++ m = 0x6; break; ++ case OMAP_DSS_COLOR_RGB24U: ++ m = 0x8; break; ++ case OMAP_DSS_COLOR_RGB24P: ++ m = 0x9; break; ++ case OMAP_DSS_COLOR_YUV2: ++ m = 0xa; break; ++ case OMAP_DSS_COLOR_UYVY: ++ m = 0xb; break; ++ case OMAP_DSS_COLOR_ARGB32: ++ m = 0xc; break; ++ case OMAP_DSS_COLOR_RGBA32: ++ m = 0xd; break; ++ case OMAP_DSS_COLOR_RGBX32: ++ m = 0xe; break; ++ default: ++ BUG(); break; ++ } ++ ++ REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1); ++} ++ ++static void _dispc_set_channel_out(enum omap_plane plane, ++ enum omap_channel channel) ++{ ++ int shift; ++ u32 val; ++ ++ switch (plane) { ++ case OMAP_DSS_GFX: ++ shift = 8; ++ break; ++ case OMAP_DSS_VIDEO1: ++ case OMAP_DSS_VIDEO2: ++ shift = 16; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, channel, shift, shift); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++void dispc_set_burst_size(enum omap_plane plane, ++ enum omap_burst_size burst_size) ++{ ++ int shift; ++ u32 val; ++ ++ enable_clocks(1); ++ ++ switch (plane) { ++ case OMAP_DSS_GFX: ++ shift = 6; ++ break; ++ case OMAP_DSS_VIDEO1: ++ case OMAP_DSS_VIDEO2: ++ shift = 14; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, burst_size, shift+1, shift); ++ dispc_write_reg(dispc_reg_att[plane], val); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_vid_color_conv(enum omap_plane plane, int enable) ++{ ++ u32 val; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, enable, 9, 9); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++void dispc_set_lcd_size(int width, int height) ++{ ++ u32 val; ++ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ enable_clocks(1); ++ dispc_write_reg(DISPC_SIZE_LCD, val); ++ enable_clocks(0); ++} ++ ++void dispc_set_digit_size(int width, int height) ++{ ++ u32 val; ++ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ enable_clocks(1); ++ dispc_write_reg(DISPC_SIZE_DIG, val); ++ enable_clocks(0); ++} ++ ++u32 dispc_get_plane_fifo_size(enum omap_plane plane) ++{ ++ const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, ++ DISPC_VID_FIFO_SIZE_STATUS(0), ++ DISPC_VID_FIFO_SIZE_STATUS(1) }; ++ u32 size; ++ ++ enable_clocks(1); ++ ++ if (cpu_is_omap24xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); ++ else if (cpu_is_omap34xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); ++ else ++ BUG(); ++ ++ enable_clocks(0); ++ ++ return size; ++} ++ ++void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high) ++{ ++ const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, ++ DISPC_VID_FIFO_THRESHOLD(0), ++ DISPC_VID_FIFO_THRESHOLD(1) }; ++ const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, ++ DISPC_VID_FIFO_SIZE_STATUS(0), ++ DISPC_VID_FIFO_SIZE_STATUS(1) }; ++ u32 size; ++ ++ enable_clocks(1); ++ ++ if (cpu_is_omap24xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); ++ else if (cpu_is_omap34xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); ++ else ++ BUG(); ++ ++ BUG_ON(low > size || high > size); ++ ++ DSSDBG("fifo(%d) size %d, low/high old %u/%u, new %u/%u\n", ++ plane, size, ++ REG_GET(ftrs_reg[plane], 11, 0), ++ REG_GET(ftrs_reg[plane], 27, 16), ++ low, high); ++ ++ if (cpu_is_omap24xx()) ++ dispc_write_reg(ftrs_reg[plane], ++ FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0)); ++ else ++ dispc_write_reg(ftrs_reg[plane], ++ FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0)); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) ++{ ++ u32 val; ++ const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0), ++ DISPC_VID_FIR(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); ++ dispc_write_reg(fir_reg[plane-1], val); ++} ++ ++static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) ++{ ++ u32 val; ++ const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0), ++ DISPC_VID_ACCU0(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); ++ dispc_write_reg(ac0_reg[plane-1], val); ++} ++ ++static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) ++{ ++ u32 val; ++ const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0), ++ DISPC_VID_ACCU1(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); ++ dispc_write_reg(ac1_reg[plane-1], val); ++} ++ ++ ++static void _dispc_set_scaling(enum omap_plane plane, ++ int orig_width, int orig_height, ++ int out_width, int out_height, ++ int ilace) ++{ ++ int fir_hinc; ++ int fir_vinc; ++ int hscaleup, vscaleup; ++ int fieldmode = 0; ++ int accu0 = 0; ++ int accu1 = 0; ++ u32 l; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ hscaleup = orig_width <= out_width; ++ vscaleup = orig_height <= out_height; ++ ++ _dispc_set_scale_coef(plane, hscaleup, vscaleup); ++ ++ if (!orig_width || orig_width == out_width) ++ fir_hinc = 0; ++ else ++ fir_hinc = 1024 * orig_width / out_width; ++ ++ if (!orig_height || orig_height == out_height) ++ fir_vinc = 0; ++ else ++ fir_vinc = 1024 * orig_height / out_height; ++ ++ _dispc_set_fir(plane, fir_hinc, fir_vinc); ++ ++ l = dispc_read_reg(dispc_reg_att[plane]); ++ l &= ~(0x0f << 5); ++ ++ l |= fir_hinc ? (1 << 5) : 0; ++ l |= fir_vinc ? (1 << 6) : 0; ++ ++ l |= hscaleup ? 0 : (1 << 7); ++ l |= vscaleup ? 0 : (1 << 8); ++ ++ dispc_write_reg(dispc_reg_att[plane], l); ++ ++ if (ilace) { ++ if (fieldmode) { ++ accu0 = fir_vinc / 2; ++ accu1 = 0; ++ } else { ++ accu0 = 0; ++ accu1 = fir_vinc / 2; ++ if (accu1 >= 1024/2) { ++ accu0 = 1024/2; ++ accu1 -= accu0; ++ } ++ } ++ } ++ ++ _dispc_set_vid_accu0(plane, 0, accu0); ++ _dispc_set_vid_accu1(plane, 0, accu1); ++} ++ ++static int _dispc_setup_plane(enum omap_plane plane, ++ enum omap_channel channel_out, ++ u32 paddr, int screen_width, ++ int pos_x, int pos_y, ++ int width, int height, ++ int out_width, int out_height, ++ enum omap_color_mode color_mode, ++ int ilace) ++{ ++ int fieldmode = 0; ++ int bpp; ++ int cconv; ++ int scaling = 0; ++ ++ if (plane == OMAP_DSS_GFX) { ++ if (width != out_width || height != out_height) ++ return -EINVAL; ++ } else { ++ /* video plane */ ++ if (width != out_width || height != out_height) ++ scaling = 1; ++ ++ if (out_width < width/2 || ++ out_width > width*8) ++ return -EINVAL; ++ ++ if (out_height < height/2 || ++ out_height > height*8) ++ return -EINVAL; ++ } ++ ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ bpp = 16; ++ cconv = 0; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ bpp = 24; ++ cconv = 0; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ bpp = 32; ++ cconv = 0; ++ break; ++ ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ BUG_ON(plane == OMAP_DSS_GFX); ++ bpp = 16; ++ cconv = 1; ++ break; ++ ++ default: ++ BUG(); ++ return 1; ++ } ++ ++ if (ilace) { ++ if (height == out_height || height > out_height) ++ fieldmode = 1; ++ } ++ ++ if (fieldmode) ++ height /= 2; ++ ++ if (ilace) ++ out_height /= 2; ++ ++ if (plane != OMAP_DSS_GFX) ++ _dispc_set_scaling(plane, width, height, ++ out_width, out_height, ++ ilace); ++ ++ /* attributes */ ++ _dispc_set_channel_out(plane, channel_out); ++ _dispc_set_color_mode(plane, color_mode); ++ if (plane != OMAP_DSS_GFX) ++ _dispc_set_vid_color_conv(plane, cconv); ++ ++ /* */ ++ ++ _dispc_set_plane_ba0(plane, paddr); ++ ++ if (fieldmode) ++ _dispc_set_plane_ba1(plane, paddr + screen_width * bpp/8); ++ else ++ _dispc_set_plane_ba1(plane, paddr); ++ ++ ++ _dispc_set_plane_pos(plane, pos_x, pos_y); ++ ++ _dispc_set_pic_size(plane, width, height); ++ ++ if (plane != OMAP_DSS_GFX) ++ _dispc_set_vid_size(plane, out_width, out_height); ++ ++ _dispc_set_row_inc(plane, ++ (screen_width - width) * bpp / 8 + ++ (fieldmode ? screen_width * bpp / 8 : 0) + ++ 1); ++ ++ return 0; ++} ++ ++static void _dispc_enable_plane(enum omap_plane plane, int enable) ++{ ++ REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0); ++} ++ ++ ++void dispc_enable_lcd_out(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); ++ enable_clocks(0); ++} ++ ++void dispc_enable_digit_out(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); ++ enable_clocks(0); ++} ++ ++void dispc_lcd_enable_signal_polarity(int act_high) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); ++ enable_clocks(0); ++} ++ ++void dispc_lcd_enable_signal(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); ++ enable_clocks(0); ++} ++ ++void dispc_pck_free_enable(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); ++ enable_clocks(0); ++} ++ ++void dispc_enable_fifohandcheck(int enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); ++ enable_clocks(0); ++} ++ ++ ++void dispc_set_lcd_display_type(enum omap_lcd_display_type type) ++{ ++ int mode; ++ ++ switch (type) { ++ case OMAP_DSS_LCD_DISPLAY_STN: ++ mode = 0; ++ break; ++ ++ case OMAP_DSS_LCD_DISPLAY_TFT: ++ mode = 1; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); ++ enable_clocks(0); ++} ++ ++void dispc_set_loadmode(enum omap_dss_load_mode mode) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); ++ enable_clocks(0); ++} ++ ++ ++void omap_dispc_set_default_color(enum omap_channel channel, u32 color) ++{ ++ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, ++ DISPC_DEFAULT_COLOR1 }; ++ ++ enable_clocks(1); ++ dispc_write_reg(def_reg[channel], color); ++ enable_clocks(0); ++} ++ ++void omap_dispc_set_trans_key(enum omap_channel ch, ++ enum omap_dss_color_key_type type, ++ u32 trans_key) ++{ ++ const struct dispc_reg tr_reg[] = { ++ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; ++ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); ++ ++ dispc_write_reg(tr_reg[ch], trans_key); ++ enable_clocks(0); ++} ++ ++void omap_dispc_enable_trans_key(enum omap_channel ch, int enable) ++{ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); ++ enable_clocks(0); ++} ++ ++void dispc_set_tft_data_lines(int data_lines) ++{ ++ int code; ++ ++ switch (data_lines) { ++ case 12: ++ code = 0; ++ break; ++ case 16: ++ code = 1; ++ break; ++ case 18: ++ code = 2; ++ break; ++ case 24: ++ code = 3; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); ++ enable_clocks(0); ++} ++ ++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode) ++{ ++ u32 l; ++ int stallmode; ++ int gpout0 = 1; ++ int gpout1; ++ ++ switch (mode) { ++ case OMAP_DSS_PARALLELMODE_BYPASS: ++ stallmode = 0; ++ gpout1 = 1; ++ break; ++ ++ case OMAP_DSS_PARALLELMODE_RFBI: ++ stallmode = 1; ++ gpout1 = 0; ++ break; ++ ++ case OMAP_DSS_PARALLELMODE_DSI: ++ stallmode = 1; ++ gpout1 = 1; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ ++ l = dispc_read_reg(DISPC_CONTROL); ++ ++ l = FLD_MOD(l, stallmode, 11, 11); ++ l = FLD_MOD(l, gpout0, 15, 15); ++ l = FLD_MOD(l, gpout1, 16, 16); ++ ++ dispc_write_reg(DISPC_CONTROL, l); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp, ++ int vsw, int vfp, int vbp) ++{ ++ u32 timing_h, timing_v; ++ ++ BUG_ON(hsw < 1 || hsw > 64); ++ BUG_ON(hfp < 1 || hfp > 256); ++ BUG_ON(hbp < 1 || hbp > 256); ++ ++ BUG_ON(vsw < 1 || vsw > 64); ++ BUG_ON(vfp < 0 || vfp > 255); ++ BUG_ON(vbp < 0 || vbp > 255); ++ ++ timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | ++ FLD_VAL(hbp-1, 27, 20); ++ ++ timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | ++ FLD_VAL(vbp, 27, 20); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_TIMING_H, timing_h); ++ dispc_write_reg(DISPC_TIMING_V, timing_v); ++ enable_clocks(0); ++} ++ ++/* change name to mode? */ ++void dispc_set_lcd_timings(struct omap_video_timings *timings) ++{ ++ unsigned xtot, ytot; ++ unsigned long ht, vt; ++ ++ _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp, ++ timings->vsw, timings->vfp, timings->vbp); ++ ++ dispc_set_lcd_size(timings->x_res, timings->y_res); ++ ++ xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp; ++ ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp; ++ ++ ht = (timings->pixel_clock * 1000) / xtot; ++ vt = (timings->pixel_clock * 1000) / xtot / ytot; ++ ++ DSSDBG("xres %u yres %u\n", timings->x_res, timings->y_res); ++ DSSDBG("pck %u\n", timings->pixel_clock); ++ DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n", ++ timings->hsw, timings->hfp, timings->hbp, ++ timings->vsw, timings->vfp, timings->vbp); ++ ++ DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt); ++} ++ ++void dispc_set_lcd_divisor(int lck_div, int pck_div) ++{ ++ BUG_ON(lck_div < 1); ++ BUG_ON(pck_div < 2); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_DIVISOR, ++ FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); ++ enable_clocks(0); ++} ++ ++static void dispc_get_lcd_divisor(int *lck_div, int *pck_div) ++{ ++ u32 l; ++ l = dispc_read_reg(DISPC_DIVISOR); ++ *lck_div = FLD_GET(l, 23, 16); ++ *pck_div = FLD_GET(l, 7, 0); ++} ++ ++unsigned long dispc_fclk_rate(void) ++{ ++ unsigned long r = 0; ++ ++ if (dss_get_dispc_clk_source() == 0) ++ r = dss_clk_get_rate(DSS_CLK_FCK1); ++ else ++#ifdef CONFIG_OMAP2_DSS_DSI ++ r = dsi_get_dsi1_pll_rate(); ++#else ++ BUG(); ++#endif ++ return r; ++} ++ ++unsigned long dispc_pclk_rate(void) ++{ ++ int lcd, pcd; ++ unsigned long r; ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_DIVISOR); ++ ++ lcd = FLD_GET(l, 23, 16); ++ pcd = FLD_GET(l, 7, 0); ++ ++ r = dispc_fclk_rate(); ++ ++ return r / lcd / pcd; ++} ++ ++ssize_t dispc_print_clocks(char *buf, ssize_t size) ++{ ++ ssize_t l = 0; ++ int lcd, pcd; ++ ++ enable_clocks(1); ++ ++ dispc_get_lcd_divisor(&lcd, &pcd); ++ ++ l += snprintf(buf + l, size - l, "- dispc -\n"); ++ ++ l += snprintf(buf + l, size - l, "dispc fclk source = %s\n", ++ dss_get_dispc_clk_source() == 0 ? ++ "dss1_alwon_fclk" : "dsi1_pll_fclk"); ++ ++ l += snprintf(buf + l, size - l, ++ "pixel clk = %lu / %d / %d = %lu\n", ++ dispc_fclk_rate(), ++ lcd, pcd, ++ dispc_pclk_rate()); ++ ++ enable_clocks(0); ++ ++ return l; ++} ++ ++static void _dispc_set_pol_freq(int onoff, int rf, int ieo, int ipc, ++ int ihs, int ivs, int acbi, int acb) ++{ ++ u32 l = 0; ++ ++ DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n", ++ onoff, rf, ieo, ipc, ihs, ivs, acbi, acb); ++ ++ l |= FLD_VAL(onoff, 17, 17); ++ l |= FLD_VAL(rf, 16, 16); ++ l |= FLD_VAL(ieo, 15, 15); ++ l |= FLD_VAL(ipc, 14, 14); ++ l |= FLD_VAL(ihs, 13, 13); ++ l |= FLD_VAL(ivs, 12, 12); ++ l |= FLD_VAL(acbi, 11, 8); ++ l |= FLD_VAL(acb, 7, 0); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_POL_FREQ, l); ++ enable_clocks(0); ++} ++ ++void dispc_set_pol_freq(struct omap_panel *panel) ++{ ++ _dispc_set_pol_freq((panel->config & OMAP_DSS_LCD_ONOFF) != 0, ++ (panel->config & OMAP_DSS_LCD_RF) != 0, ++ (panel->config & OMAP_DSS_LCD_IEO) != 0, ++ (panel->config & OMAP_DSS_LCD_IPC) != 0, ++ (panel->config & OMAP_DSS_LCD_IHS) != 0, ++ (panel->config & OMAP_DSS_LCD_IVS) != 0, ++ panel->acbi, panel->acb); ++} ++ ++void find_lck_pck_divs(int is_tft, unsigned long req_pck, unsigned long fck, ++ int *lck_div, int *pck_div) ++{ ++ int pcd_min = is_tft ? 2 : 3; ++ unsigned long best_pck; ++ int best_ld, cur_ld; ++ int best_pd, cur_pd; ++ ++ best_pck = 0; ++ best_ld = 0; ++ best_pd = 0; ++ ++ for (cur_ld = 1; cur_ld <= 255; ++cur_ld) { ++ unsigned long lck = fck / cur_ld; ++ ++ for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) { ++ unsigned long pck = lck / cur_pd; ++ long old_delta = abs(best_pck - req_pck); ++ long new_delta = abs(pck - req_pck); ++ ++ if (best_pck == 0 || new_delta < old_delta) { ++ best_pck = pck; ++ best_ld = cur_ld; ++ best_pd = cur_pd; ++ ++ if (pck == req_pck) ++ goto found; ++ } ++ ++ if (pck < req_pck) ++ break; ++ } ++ ++ if (lck / pcd_min < req_pck) ++ break; ++ } ++ ++found: ++ *lck_div = best_ld; ++ *pck_div = best_pd; ++} ++ ++int dispc_calc_clock_div(int is_tft, unsigned long req_pck, ++ struct dispc_clock_info *cinfo) ++{ ++ unsigned long prate; ++ struct dispc_clock_info cur, best; ++ int match = 0; ++ int min_fck_per_pck; ++ ++ if (cpu_is_omap34xx()) ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ else ++ prate = 0; ++ ++ if (req_pck == dispc.cache_req_pck && ++ ((cpu_is_omap34xx() && prate == dispc.cache_prate) || ++ dispc.cache_cinfo.fck == dss_clk_get_rate(DSS_CLK_FCK1))) { ++ DSSDBG("dispc clock info found from cache.\n"); ++ *cinfo = dispc.cache_cinfo; ++ return 0; ++ } ++ ++ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; ++ ++ if (min_fck_per_pck && ++ req_pck * min_fck_per_pck > DISPC_MAX_FCK) { ++ DSSERR("Requested pixel clock not possible with the current " ++ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " ++ "the constraint off.\n"); ++ min_fck_per_pck = 0; ++ } ++ ++retry: ++ memset(&cur, 0, sizeof(cur)); ++ memset(&best, 0, sizeof(best)); ++ ++ if (cpu_is_omap24xx()) { ++ /* XXX can we change the clock on omap2? */ ++ cur.fck = dss_clk_get_rate(DSS_CLK_FCK1); ++ cur.fck_div = 1; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, cur.fck, ++ &cur.lck_div, &cur.pck_div); ++ ++ cur.lck = cur.fck / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ best = cur; ++ ++ goto found; ++ } else if (cpu_is_omap34xx()) { ++ for (cur.fck_div = 16; cur.fck_div > 0; --cur.fck_div) { ++ cur.fck = prate / cur.fck_div * 2; ++ ++ if (cur.fck > DISPC_MAX_FCK) ++ continue; ++ ++ if (min_fck_per_pck && ++ cur.fck < req_pck * min_fck_per_pck) ++ continue; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, cur.fck, ++ &cur.lck_div, &cur.pck_div); ++ ++ cur.lck = cur.fck / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ if (abs(cur.pck - req_pck) < abs(best.pck - req_pck)) { ++ best = cur; ++ ++ if (cur.pck == req_pck) ++ goto found; ++ } ++ } ++ } else { ++ BUG(); ++ } ++ ++found: ++ if (!match) { ++ if (min_fck_per_pck) { ++ DSSERR("Could not find suitable clock settings.\n" ++ "Turning FCK/PCK constraint off and" ++ "trying again.\n"); ++ min_fck_per_pck = 0; ++ goto retry; ++ } ++ ++ DSSERR("Could not find suitable clock settings.\n"); ++ ++ return -EINVAL; ++ } ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dispc.cache_req_pck = req_pck; ++ dispc.cache_prate = prate; ++ dispc.cache_cinfo = best; ++ ++ return 0; ++} ++ ++int dispc_set_clock_div(struct dispc_clock_info *cinfo) ++{ ++ unsigned long prate; ++ int r; ++ ++ if (cpu_is_omap34xx()) { ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ DSSDBG("dpll4_m4 = %ld\n", prate); ++ } ++ ++ DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div); ++ DSSDBG("lck = %ld (%d)\n", cinfo->lck, cinfo->lck_div); ++ DSSDBG("pck = %ld (%d)\n", cinfo->pck, cinfo->pck_div); ++ ++ if (cpu_is_omap34xx()) { ++ r = clk_set_rate(dispc.dpll4_m4_ck, prate / cinfo->fck_div); ++ if (r) ++ return r; ++ } ++ ++ dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div); ++ ++ return 0; ++} ++ ++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) ++{ ++ int i; ++ int ret = -EBUSY; ++ unsigned long flags; ++ u32 new_mask = 0; ++ ++ if (isr == NULL) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ if (registered_isr[i].isr == isr) { ++ ret = -EINVAL; ++ break; ++ } ++ ++ if (registered_isr[i].isr != NULL) ++ continue; ++ ++ registered_isr[i].isr = isr; ++ registered_isr[i].arg = arg; ++ registered_isr[i].mask = mask; ++ ++ enable_clocks(1); ++ new_mask = dispc_read_reg(DISPC_IRQENABLE); ++ new_mask |= mask; ++ dispc_write_reg(DISPC_IRQENABLE, new_mask); ++ enable_clocks(0); ++ ++ ret = 0; ++ break; ++ } ++ ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ ++ return ret; ++} ++EXPORT_SYMBOL(omap_dispc_register_isr); ++ ++int omap_dispc_unregister_isr(omap_dispc_isr_t isr) ++{ ++ int i, j; ++ unsigned long flags; ++ u32 new_mask = DISPC_IRQ_MASK_ERROR; ++ int ret = -EINVAL; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ if (registered_isr[i].isr != isr) ++ continue; ++ ++ registered_isr[i].isr = NULL; ++ registered_isr[i].arg = NULL; ++ registered_isr[i].mask = 0; ++ ++ for (j = 0; j < DISPC_MAX_NR_ISRS; j++) ++ new_mask |= registered_isr[j].mask; ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_IRQENABLE, new_mask); ++ enable_clocks(0); ++ ++ ret = 0; ++ break; ++ } ++ ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ ++ return ret; ++} ++EXPORT_SYMBOL(omap_dispc_unregister_isr); ++ ++#ifdef DEBUG ++static void print_irq_status(u32 status) ++{ ++ if ((status & DISPC_IRQ_MASK_ERROR) == 0) ++ return; ++ ++ printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DISPC_IRQ_##x) \ ++ printk(#x " "); ++ PIS(GFX_FIFO_UNDERFLOW); ++ PIS(OCP_ERR); ++ PIS(VID1_FIFO_UNDERFLOW); ++ PIS(VID2_FIFO_UNDERFLOW); ++ PIS(SYNC_LOST); ++ PIS(SYNC_LOST_DIGIT); ++#undef PIS ++ ++ printk("\n"); ++} ++#endif ++ ++/* Called from dss.c. Note that we don't touch clocks here, ++ * but we presume they are on because we got an IRQ. However, ++ * an irq handler may turn the clocks off, so we may not have ++ * clock later in the function. */ ++void dispc_irq_handler(void) ++{ ++ int i; ++ u32 irqstatus = dispc_read_reg(DISPC_IRQSTATUS); ++ static int errors; ++ u32 handledirqs = 0; ++ ++#ifdef DEBUG ++ if (dss_debug) ++ print_irq_status(irqstatus); ++#endif ++ /* Ack the interrupt. Do it here before clocks are possibly turned ++ * off */ ++ dispc_write_reg(DISPC_IRQSTATUS, irqstatus); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ if (!registered_isr[i].isr) ++ continue; ++ if (registered_isr[i].mask & irqstatus) { ++ registered_isr[i].isr(registered_isr[i].arg, ++ irqstatus); ++ handledirqs |= registered_isr[i].mask; ++ } ++ } ++ ++ if (irqstatus & ~handledirqs & DISPC_IRQ_MASK_ERROR) { ++ if (printk_ratelimit()) { ++ DSSERR("dispc irq error status %04x\n", ++ irqstatus); ++ } ++ if (errors++ > 100) { ++ DSSERR("Excessive DISPC errors\n" ++ "Turning off lcd and digit\n"); ++ dispc_enable_lcd_out(0); ++ dispc_enable_digit_out(0); ++ } ++ } ++ ++} ++ ++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC ++void dispc_fake_vsync_irq(void) ++{ ++ u32 irqstatus = DISPC_IRQ_VSYNC; ++ int i; ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ if (!registered_isr[i].isr) ++ continue; ++ if (registered_isr[i].mask & irqstatus) ++ registered_isr[i].isr(registered_isr[i].arg, ++ irqstatus); ++ } ++} ++#endif ++ ++static void _omap_dispc_initialize_irq(void) ++{ ++ memset(registered_isr, 0, sizeof(registered_isr)); ++ ++ /* there's SYNC_LOST_DIGIT waiting after enabling the DSS, ++ * so clear it */ ++ dispc_write_reg(DISPC_IRQSTATUS, ++ dispc_read_reg(DISPC_IRQSTATUS)); ++ ++ /* We'll handle these always */ ++ dispc_write_reg(DISPC_IRQENABLE, DISPC_IRQ_MASK_ERROR); ++} ++ ++static void _omap_dispc_initial_config(void) ++{ ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_SYSCONFIG); ++ l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */ ++ l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */ ++ l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */ ++ l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */ ++ dispc_write_reg(DISPC_SYSCONFIG, l); ++ ++ /* FUNCGATED */ ++ REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); ++ ++ /* L3 firewall setting: enable access to OCM RAM */ ++ __raw_writel(0x402000b0, IO_ADDRESS(0x680050a0)); ++ ++ _dispc_setup_color_conv_coef(); ++ ++ dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); ++ ++ /* Set logic clock to fck, pixel clock to fck/2 for now */ ++ dispc_set_lcd_divisor(1, 2); ++} ++ ++int dispc_init(void) ++{ ++ u32 rev; ++ ++ spin_lock_init(&dispc.irq_lock); ++ ++ dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS); ++ if (!dispc.base) { ++ DSSERR("can't ioremap DISPC\n"); ++ return -ENOMEM; ++ } ++ ++ if (cpu_is_omap34xx()) { ++ dispc.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck"); ++ if (IS_ERR(dispc.dpll4_m4_ck)) { ++ DSSERR("Failed to get dpll4_m4_ck\n"); ++ return -ENODEV; ++ } ++ } ++ ++ enable_clocks(1); ++ ++ _omap_dispc_initial_config(); ++ ++ _omap_dispc_initialize_irq(); ++ ++ dispc_save_context(); ++ ++ rev = dispc_read_reg(DISPC_REVISION); ++ printk(KERN_INFO "OMAP DISPC rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++void dispc_exit(void) ++{ ++ if (cpu_is_omap34xx()) ++ clk_put(dispc.dpll4_m4_ck); ++ iounmap(dispc.base); ++} ++ ++int dispc_enable_plane(enum omap_plane plane, int enable) ++{ ++ DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); ++ ++ enable_clocks(1); ++ _dispc_enable_plane(plane, enable); ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, ++ u32 paddr, int screen_width, ++ int pos_x, int pos_y, ++ int width, int height, ++ int out_width, int out_height, ++ enum omap_color_mode color_mode, ++ int ilace) ++{ ++ int r = 0; ++ ++ DSSDBG("dispc_setup_plane %d, %x, sw %d, %d,%d, %dx%d -> " ++ "%dx%d, (ilace %d)\n", ++ plane, paddr, screen_width, pos_x, pos_y, ++ width, height, ++ out_width, out_height, ++ ilace); ++ ++ enable_clocks(1); ++ ++ r = _dispc_setup_plane(plane, channel_out, ++ paddr, screen_width, ++ pos_x, pos_y, ++ width, height, ++ out_width, out_height, ++ color_mode, ilace); ++ ++ enable_clocks(0); ++ ++ return r; ++} ++ ++static int dispc_is_intersecting(int x1, int y1, int w1, int h1, ++ int x2, int y2, int w2, int h2) ++{ ++ if (x1 >= (x2+w2)) ++ return 0; ++ ++ if ((x1+w1) <= x2) ++ return 0; ++ ++ if (y1 >= (y2+h2)) ++ return 0; ++ ++ if ((y1+h1) <= y2) ++ return 0; ++ ++ return 1; ++} ++ ++static int dispc_is_overlay_scaled(struct omap_overlay_info *pi) ++{ ++ if (pi->width != pi->out_width) ++ return 1; ++ ++ if (pi->height != pi->out_height) ++ return 1; ++ ++ return 0; ++} ++ ++/* returns the area that needs updating */ ++void dispc_setup_partial_planes(struct omap_display *display, ++ int *xi, int *yi, int *wi, int *hi) ++{ ++ struct omap_overlay_manager *mgr; ++ int i; ++ ++ int x, y, w, h; ++ ++ x = *xi; ++ y = *yi; ++ w = *wi; ++ h = *hi; ++ ++ DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n", ++ *xi, *yi, *wi, *hi); ++ ++ ++ mgr = display->manager; ++ ++ if (!mgr) { ++ DSSDBG("no manager\n"); ++ return; ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl; ++ struct omap_overlay_info *pi; ++ ovl = &mgr->overlays[i]; ++ ++ if (ovl->manager != mgr) ++ continue; ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) ++ continue; ++ ++ pi = &ovl->info; ++ ++ if (!pi->enabled) ++ continue; ++ /* ++ * If the plane is intersecting and scaled, we ++ * enlarge the update region to accomodate the ++ * whole area ++ */ ++ ++ if (dispc_is_intersecting(x, y, w, h, ++ pi->pos_x, pi->pos_y, ++ pi->out_width, pi->out_height)) { ++ if (dispc_is_overlay_scaled(pi)) { ++ ++ int x1, y1, x2, y2; ++ ++ if (x > pi->pos_x) ++ x1 = pi->pos_x; ++ else ++ x1 = x; ++ ++ if (y > pi->pos_y) ++ y1 = pi->pos_y; ++ else ++ y1 = y; ++ ++ if ((x + w) < (pi->pos_x + pi->out_width)) ++ x2 = pi->pos_x + pi->out_width; ++ else ++ x2 = x + w; ++ ++ if ((y + h) < (pi->pos_y + pi->out_height)) ++ y2 = pi->pos_y + pi->out_height; ++ else ++ y2 = y + h; ++ ++ x = x1; ++ y = y1; ++ w = x2 - x1; ++ h = y2 - y1; ++ ++ DSSDBG("Update area after enlarge due to " ++ "scaling %d, %d %dx%d\n", ++ x, y, w, h); ++ } ++ } ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl = &mgr->overlays[i]; ++ struct omap_overlay_info *pi = &ovl->info; ++ ++ int px = pi->pos_x; ++ int py = pi->pos_y; ++ int pw = pi->width; ++ int ph = pi->height; ++ int pow = pi->out_width; ++ int poh = pi->out_height; ++ u32 pa = pi->paddr; ++ int psw = pi->screen_width; ++ int bpp; ++ ++ if (ovl->manager != mgr) ++ continue; ++ ++ /* ++ * If plane is not enabled or the update region ++ * does not intersect with the plane in question, ++ * we really disable the plane from hardware ++ */ ++ ++ if (!pi->enabled || ++ !dispc_is_intersecting(x, y, w, h, ++ px, py, pow, poh)) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ switch (pi->color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ bpp = 16; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ bpp = 24; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ bpp = 32; ++ break; ++ ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ bpp = 16; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ if (x > pi->pos_x) { ++ px = 0; ++ pw -= (x - pi->pos_x); ++ pa += (x - pi->pos_x) * bpp / 8; ++ } else { ++ px = pi->pos_x - x; ++ } ++ ++ if (y > pi->pos_y) { ++ py = 0; ++ ph -= (y - pi->pos_y); ++ pa += (y - pi->pos_y) * psw * bpp / 8; ++ } else { ++ py = pi->pos_y - y; ++ } ++ ++ if (w < (px+pw)) ++ pw -= (px+pw) - (w); ++ ++ if (h < (py+ph)) ++ ph -= (py+ph) - (h); ++ ++ /* Can't scale the GFX plane */ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 || ++ dispc_is_overlay_scaled(pi) == 0) { ++ pow = pw; ++ poh = ph; ++ } ++ ++ DSSDBG("calc plane %d, %x, sw %d, %d,%d, %dx%d -> %dx%d\n", ++ ovl->id, pa, psw, px, py, pw, ph, pow, poh); ++ ++ dispc_setup_plane(ovl->id, mgr->id, ++ pa, psw, ++ px, py, ++ pw, ph, ++ pow, poh, ++ pi->color_mode, 0); ++ ++ dispc_enable_plane(ovl->id, 1); ++ } ++ ++ *xi = x; ++ *yi = y; ++ *wi = w; ++ *hi = h; ++ ++} ++ +diff --git a/arch/arm/plat-omap/dss/display.c b/arch/arm/plat-omap/dss/display.c +new file mode 100644 +index 0000000..e3ff778 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/display.c +@@ -0,0 +1,787 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/display.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "DISPLAY" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "dss.h" ++ ++#define DSS_MAX_DISPLAYS 8 ++ ++static int num_displays; ++static struct omap_display displays[DSS_MAX_DISPLAYS]; ++ ++static ssize_t show_clk(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ ssize_t l, size = PAGE_SIZE; ++ ++ l = 0; ++ ++ l += dss_print_clocks(buf + l, size - l); ++ ++ l += dispc_print_clocks(buf + l, size - l); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ l += dsi_print_clocks(buf + l, size - l); ++#endif ++ return l; ++} ++ ++static DEVICE_ATTR(clk, S_IRUGO, show_clk, NULL); ++ ++int initialize_sysfs(struct device *dev) ++{ ++ int r; ++ ++ r = device_create_file(dev, &dev_attr_clk); ++ if (r) ++ DSSERR("failed to create sysfs clk file\n"); ++ ++ return r; ++} ++ ++void uninitialize_sysfs(struct device *dev) ++{ ++ device_remove_file(dev, &dev_attr_clk); ++} ++ ++void initialize_displays(struct omap_dss_platform_data *pdata) ++{ ++ int i; ++ ++ num_displays = 0; ++ ++ BUG_ON(pdata->num_displays > DSS_MAX_DISPLAYS); ++ ++ for (i = 0; i < pdata->num_displays; ++i) { ++ struct omap_display *display = &displays[i]; ++ ++ /*atomic_set(&display->ref_count, 0);*/ ++ display->ref_count = 0; ++ ++ display->hw_config = *pdata->displays[i]; ++ display->type = pdata->displays[i]->type; ++ display->name = pdata->displays[i]->name; ++ ++ switch (display->type) { ++ ++ case OMAP_DISPLAY_TYPE_DPI: ++ dpi_init_display(display); ++ break; ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ case OMAP_DISPLAY_TYPE_DBI: ++ rfbi_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_VENC ++ case OMAP_DISPLAY_TYPE_VENC: ++ venc_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ case OMAP_DISPLAY_TYPE_SDI: ++ sdi_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ case OMAP_DISPLAY_TYPE_DSI: ++ dsi_init_display(display); ++ break; ++#endif ++ ++ default: ++ DSSERR("Support for display '%s' not compiled in.\n", ++ display->name); ++ continue; ++ } ++ ++ num_displays++; ++ } ++} ++ ++static int check_overlay(struct omap_overlay *ovl, ++ struct omap_display *display) ++{ ++ struct omap_overlay_info *info; ++ int outw, outh; ++ ++ if (!display) ++ return 0; ++ ++ if (!ovl->info.enabled) ++ return 0; ++ ++ info = &ovl->info; ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { ++ outw = info->width; ++ outh = info->height; ++ } else { ++ if (info->out_width == 0) ++ outw = info->width; ++ else ++ outw = info->out_width; ++ ++ if (info->out_height == 0) ++ outh = info->height; ++ else ++ outh = info->out_height; ++ } ++ ++ if (display->panel->timings.x_res < info->pos_x + outw) ++ return -EINVAL; ++ ++ if (display->panel->timings.y_res < info->pos_y + outh) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++ ++static int omap_dss_set_manager(struct omap_overlay *ovl, ++ struct omap_overlay_manager *mgr) ++{ ++ int r; ++ ++ if (ovl->manager) { ++ DSSERR("overlay '%s' already has a manager '%s'\n", ++ ovl->name, ovl->manager->name); ++ } ++ ++ r = check_overlay(ovl, mgr->display); ++ if (r) ++ return r; ++ ++ ovl->manager = mgr; ++ ++ return 0; ++} ++ ++static int omap_dss_unset_manager(struct omap_overlay *ovl) ++{ ++ if (!ovl->manager) { ++ DSSERR("failed to detach overlay: manager not set\n"); ++ return -EINVAL; ++ } ++ ++ ovl->manager = NULL; ++ ++ return 0; ++} ++ ++static int omap_dss_set_display(struct omap_overlay_manager *mgr, ++ struct omap_display *display) ++{ ++ int i; ++ int r; ++ ++ if (display->manager) { ++ DSSERR("display '%s' already has a manager '%s'\n", ++ display->name, display->manager->name); ++ return -EINVAL; ++ } ++ ++ if ((mgr->supported_displays & display->type) == 0) { ++ DSSERR("display '%s' does not support manager '%s'\n", ++ display->name, mgr->name); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl = &mgr->overlays[i]; ++ ++ if (ovl->manager != mgr || !ovl->info.enabled) ++ continue; ++ ++ r = check_overlay(ovl, display); ++ if (r) ++ return r; ++ } ++ ++ display->manager = mgr; ++ mgr->display = display; ++ ++ return 0; ++} ++ ++static int omap_dss_unset_display(struct omap_overlay_manager *mgr) ++{ ++ if (!mgr->display) { ++ DSSERR("failed to unset display, display not set.\n"); ++ return -EINVAL; ++ } ++ ++ mgr->display->manager = NULL; ++ mgr->display = NULL; ++ ++ return 0; ++} ++ ++static int omap_dss_setup_overlay_input(struct omap_overlay *ovl, ++ u32 paddr, void *vaddr, int screen_width, ++ int width, int height, ++ enum omap_color_mode color_mode) ++{ ++ int r; ++ struct omap_overlay_info old_info; ++ ++ if ((ovl->supported_modes & color_mode) == 0) { ++ DSSERR("overlay doesn't support mode %d\n", color_mode); ++ return -EINVAL; ++ } ++ ++ old_info = ovl->info; ++ ++ ovl->info.paddr = paddr; ++ ovl->info.vaddr = vaddr; ++ ovl->info.screen_width = screen_width; ++ ++ ovl->info.width = width; ++ ovl->info.height = height; ++ ovl->info.color_mode = color_mode; ++ ++ if (ovl->manager) { ++ r = check_overlay(ovl, ovl->manager->display); ++ if (r) { ++ ovl->info = old_info; ++ return r; ++ } ++ } ++ ++ return 0; ++} ++ ++static int omap_dss_setup_overlay_output(struct omap_overlay *ovl, ++ int pos_x, int pos_y, ++ int out_width, int out_height) ++{ ++ int r; ++ struct omap_overlay_info old_info; ++ ++ old_info = ovl->info; ++ ++ ovl->info.pos_x = pos_x; ++ ovl->info.pos_y = pos_y; ++ ovl->info.out_width = out_width; ++ ovl->info.out_height = out_height; ++ ++ if (ovl->manager) { ++ r = check_overlay(ovl, ovl->manager->display); ++ if (r) { ++ ovl->info = old_info; ++ return r; ++ } ++ } ++ ++ return 0; ++} ++ ++static int omap_dss_enable_overlay(struct omap_overlay *ovl, int enable) ++{ ++ struct omap_overlay_info old_info; ++ int r; ++ ++ old_info = ovl->info; ++ ++ ovl->info.enabled = enable ? 1 : 0; ++ ++ if (ovl->manager) { ++ r = check_overlay(ovl, ovl->manager->display); ++ if (r) { ++ ovl->info = old_info; ++ return r; ++ } ++ } ++ ++ return 0; ++} ++ ++ ++static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) ++{ ++ int i; ++ int r = 0; ++ ++ DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); ++ ++ if (!mgr->display) { ++ DSSDBG("no display, aborting apply\n"); ++ return 0; ++ } ++ ++ /* on a manual update display update() handles configuring ++ * planes */ ++ if (mgr->display->get_update_mode) { ++ enum omap_dss_update_mode mode; ++ mode = mgr->display->get_update_mode(mgr->display); ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return 0; ++ } ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ int ilace = 0; ++ int outw, outh; ++ ++ struct omap_overlay *ovl = &mgr->overlays[i]; ++ ++ if (!ovl->manager) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ if (ovl->manager != mgr) ++ continue; ++ ++ if (!ovl->info.enabled) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ if (mgr->display->type == OMAP_DISPLAY_TYPE_VENC) ++ ilace = 1; ++ ++ if (ovl->info.out_width == 0) ++ outw = ovl->info.width; ++ else ++ outw = ovl->info.out_width; ++ ++ if (ovl->info.out_height == 0) ++ outh = ovl->info.height; ++ else ++ outh = ovl->info.out_height; ++ ++ r = dispc_setup_plane(ovl->id, ovl->manager->id, ++ ovl->info.paddr, ++ ovl->info.screen_width, ++ ovl->info.pos_x, ++ ovl->info.pos_y, ++ ovl->info.width, ++ ovl->info.height, ++ outw, ++ outh, ++ ovl->info.color_mode, ++ ilace); ++ ++ if (r) { ++ DSSERR("dispc_setup_plane failed\n"); ++ goto exit; ++ } ++ ++ dispc_enable_plane(ovl->id, 1); ++ } ++ ++ dispc_go(mgr->id); ++ ++exit: ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ return r; ++} ++ ++static struct omap_overlay dispc_overlays[] = { ++ { ++ .name = "gfx", ++ .id = OMAP_DSS_GFX, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ .supported_modes = OMAP_DSS_COLOR_GFX_OMAP3, ++ }, ++ { ++ .name = "vid1", ++ .id = OMAP_DSS_VIDEO1, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ .supported_modes = OMAP_DSS_COLOR_VID_OMAP3, ++ .caps = OMAP_DSS_OVL_CAP_SCALE, ++ }, ++ { ++ .name = "vid2", ++ .id = OMAP_DSS_VIDEO2, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ .supported_modes = OMAP_DSS_COLOR_VID_OMAP3, ++ .caps = OMAP_DSS_OVL_CAP_SCALE, ++ }, ++}; ++ ++static struct omap_overlay_manager dispc_overlay_managers[] = ++{ ++ [OMAP_DSS_OVL_MGR_LCD] = { ++ .name = "lcd", ++ .id = OMAP_DSS_CHANNEL_LCD, ++ .num_overlays = 3, ++ .overlays = dispc_overlays, ++ .set_display = &omap_dss_set_display, ++ .unset_display = &omap_dss_unset_display, ++ .apply = &omap_dss_mgr_apply, ++ .caps = OMAP_DSS_OVL_MGR_CAP_DISPC, ++ .supported_displays = ++ OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI | ++ OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI, ++ }, ++ [OMAP_DSS_OVL_MGR_TV] = { ++ .name = "tv", ++ .id = OMAP_DSS_CHANNEL_DIGIT, ++ .num_overlays = 3, ++ .overlays = dispc_overlays, ++ .set_display = &omap_dss_set_display, ++ .unset_display = &omap_dss_unset_display, ++ .apply = &omap_dss_mgr_apply, ++ .caps = OMAP_DSS_OVL_MGR_CAP_DISPC, ++ .supported_displays = OMAP_DISPLAY_TYPE_VENC, ++ }, ++}; ++ ++static int num_overlays = 3; ++ ++static struct omap_overlay *omap_dss_overlays[10] = { ++ &dispc_overlays[0], ++ &dispc_overlays[1], ++ &dispc_overlays[2], ++}; ++ ++static int num_overlay_managers = 2; ++ ++static struct omap_overlay_manager *omap_dss_overlay_managers[10] = { ++ &dispc_overlay_managers[0], ++ &dispc_overlay_managers[1], ++}; ++ ++ ++static void omap_dss_add_overlay(struct omap_overlay *overlay) ++{ ++ int i = num_overlays++; ++ ++ omap_dss_overlays[i] = overlay; ++} ++ ++static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) ++{ ++ int i = num_overlay_managers++; ++ omap_dss_overlay_managers[i] = manager; ++} ++ ++int omap_dss_get_num_overlays(void) ++{ ++ return num_overlays; ++} ++EXPORT_SYMBOL(omap_dss_get_num_overlays); ++ ++struct omap_overlay *omap_dss_get_overlay(int num) ++{ ++ BUG_ON(num >= num_overlays); ++ return omap_dss_overlays[num]; ++} ++EXPORT_SYMBOL(omap_dss_get_overlay); ++ ++int omap_dss_get_num_overlay_managers(void) ++{ ++ return num_overlay_managers; ++} ++EXPORT_SYMBOL(omap_dss_get_num_overlay_managers); ++ ++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num) ++{ ++ BUG_ON(num >= num_overlay_managers); ++ return omap_dss_overlay_managers[num]; ++} ++EXPORT_SYMBOL(omap_dss_get_overlay_manager); ++ ++static int ovl_mgr_apply_l4(struct omap_overlay_manager *mgr) ++{ ++ DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name); ++ ++ return 0; ++} ++ ++void initialize_overlays(const char *def_disp_name) ++{ ++ int i; ++ struct omap_overlay_manager *lcd_mgr; ++ struct omap_overlay_manager *tv_mgr; ++ struct omap_overlay_manager *def_mgr = NULL; ++ ++ lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD); ++ tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV); ++ ++ if (def_disp_name) { ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ ++ if (strcmp(display->name, def_disp_name) == 0) { ++ if (display->type != OMAP_DISPLAY_TYPE_VENC) { ++ omap_dss_set_display(lcd_mgr, display); ++ def_mgr = lcd_mgr; ++ } else { ++ omap_dss_set_display(tv_mgr, display); ++ def_mgr = tv_mgr; ++ } ++ ++ break; ++ } ++ } ++ ++ if (!def_mgr) ++ DSSWARN("default display %s not found\n", ++ def_disp_name); ++ } ++ ++ if (def_mgr != lcd_mgr) { ++ /* connect lcd manager to first non-VENC display found */ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->type != OMAP_DISPLAY_TYPE_VENC) { ++ omap_dss_set_display(lcd_mgr, display); ++ ++ if (!def_mgr) ++ def_mgr = lcd_mgr; ++ ++ break; ++ } ++ } ++ } ++ ++ if (def_mgr != tv_mgr) { ++ /* connect tv manager to first VENC display found */ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->type == OMAP_DISPLAY_TYPE_VENC) { ++ omap_dss_set_display(tv_mgr, display); ++ ++ if (!def_mgr) ++ def_mgr = tv_mgr; ++ ++ break; ++ } ++ } ++ } ++ ++ /* connect all dispc overlays to def_mgr */ ++ if (def_mgr) { ++ for (i = 0; i < 3; i++) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ omap_dss_set_manager(ovl, def_mgr); ++ } ++ } ++ ++ /* setup L4 overlay as an example */ ++ { ++ static struct omap_overlay ovl = { ++ .name = "l4-ovl", ++ .supported_modes = OMAP_DSS_COLOR_RGB24U, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ }; ++ ++ static struct omap_overlay_manager mgr = { ++ .name = "l4", ++ .num_overlays = 1, ++ .overlays = &ovl, ++ .set_display = &omap_dss_set_display, ++ .unset_display = &omap_dss_unset_display, ++ .apply = &ovl_mgr_apply_l4, ++ .supported_displays = ++ OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI, ++ }; ++ ++ omap_dss_add_overlay(&ovl); ++ omap_dss_add_overlay_manager(&mgr); ++ omap_dss_set_manager(&ovl, &mgr); ++ } ++ ++} ++ ++ ++int omap_dss_get_num_displays(void) ++{ ++ return num_displays; ++} ++EXPORT_SYMBOL(omap_dss_get_num_displays); ++ ++struct omap_display *omap_dss_get_display(int no) ++{ ++ struct omap_display *display; ++ ++ if (no >= num_displays) ++ return NULL; ++ ++ display = &displays[no]; ++ ++ switch (display->type) { ++ case OMAP_DISPLAY_TYPE_VENC: ++ break; ++ ++ case OMAP_DISPLAY_TYPE_DPI: ++ case OMAP_DISPLAY_TYPE_SDI: ++ if (display->panel == NULL) ++ return NULL; ++ break; ++ ++ case OMAP_DISPLAY_TYPE_DBI: ++ case OMAP_DISPLAY_TYPE_DSI: ++ if (display->panel == NULL || display->ctrl == NULL) ++ return NULL; ++ break; ++ ++ default: ++ return NULL; ++ } ++ ++ if (display->panel) { ++ if (!try_module_get(display->panel->owner)) ++ goto err0; ++ ++ if (display->panel->init) ++ if (display->panel->init(display) != 0) ++ goto err1; ++ } ++ ++ if (display->ctrl) { ++ if (!try_module_get(display->ctrl->owner)) ++ goto err2; ++ ++ if (display->ctrl->init) ++ if (display->ctrl->init(display) != 0) ++ goto err3; ++ } ++ ++ display->ref_count++; ++ /* ++ if (atomic_cmpxchg(&display->ref_count, 0, 1) != 0) ++ return 0; ++*/ ++ ++ return display; ++err3: ++ if (display->ctrl) ++ module_put(display->ctrl->owner); ++err2: ++ if (display->panel && display->panel->init) ++ display->panel->cleanup(display); ++err1: ++ if (display->panel) ++ module_put(display->panel->owner); ++err0: ++ return NULL; ++} ++EXPORT_SYMBOL(omap_dss_get_display); ++ ++void omap_dss_put_display(struct omap_display *display) ++{ ++ if (--display->ref_count > 0) ++ return; ++/* ++ if (atomic_cmpxchg(&display->ref_count, 1, 0) != 1) ++ return; ++*/ ++ if (display->ctrl) { ++ if (display->ctrl->cleanup) ++ display->ctrl->cleanup(display); ++ module_put(display->ctrl->owner); ++ } ++ ++ if (display->panel) { ++ if (display->panel->cleanup) ++ display->panel->cleanup(display); ++ module_put(display->panel->owner); ++ } ++} ++EXPORT_SYMBOL(omap_dss_put_display); ++ ++void omap_dss_register_ctrl(struct omap_ctrl *ctrl) ++{ ++ int i; ++ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->hw_config.ctrl_name && ++ strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) { ++ display->ctrl = ctrl; ++ DSSDBG("ctrl '%s' registered\n", ctrl->name); ++ } ++ } ++} ++EXPORT_SYMBOL(omap_dss_register_ctrl); ++ ++void omap_dss_register_panel(struct omap_panel *panel) ++{ ++ int i; ++ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->hw_config.panel_name && ++ strcmp(display->hw_config.panel_name, panel->name) == 0) { ++ display->panel = panel; ++ DSSDBG("panel '%s' registered\n", panel->name); ++ } ++ } ++} ++EXPORT_SYMBOL(omap_dss_register_panel); ++ ++void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl) ++{ ++ int i; ++ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->hw_config.ctrl_name && ++ strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) ++ display->ctrl = NULL; ++ } ++} ++EXPORT_SYMBOL(omap_dss_unregister_ctrl); ++ ++void omap_dss_unregister_panel(struct omap_panel *panel) ++{ ++ int i; ++ ++ for (i = 0; i < num_displays; i++) { ++ struct omap_display *display = &displays[i]; ++ if (display->hw_config.panel_name && ++ strcmp(display->hw_config.panel_name, panel->name) == 0) ++ display->panel = NULL; ++ } ++} ++EXPORT_SYMBOL(omap_dss_unregister_panel); +diff --git a/arch/arm/plat-omap/dss/dpi.c b/arch/arm/plat-omap/dss/dpi.c +new file mode 100644 +index 0000000..2dd8a3b +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dpi.c +@@ -0,0 +1,344 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dpi.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "dss.h" ++ ++ ++static struct { ++ int update_enabled; ++} dpi; ++ ++static void dpi_set_mode(struct omap_display *display) ++{ ++ struct omap_panel *panel = display->panel; ++ int lck_div, pck_div; ++ unsigned long fck; ++ unsigned long pck; ++ int is_tft; ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dispc_set_pol_freq(panel); ++ ++ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ { ++ struct dsi_clock_info cinfo; ++ dsi_pll_calc_pck(is_tft, ++ display->panel->timings.pixel_clock * 1000, ++ &cinfo); ++ ++ dsi_pll_program(&cinfo); ++ ++ dss_select_clk_source(0, 1); ++ ++ dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div); ++ ++ fck = cinfo.dispc_fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#else ++ { ++ struct dispc_clock_info cinfo; ++ dispc_calc_clock_div(is_tft, panel->timings.pixel_clock * 1000, ++ &cinfo); ++ ++ if (dispc_set_clock_div(&cinfo)) { ++ DSSERR("Failed to set DSS clocks\n"); ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ return; ++ } ++ ++ fck = cinfo.fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#endif ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ if (pck != panel->timings.pixel_clock) { ++ DSSWARN("Could not find exact pixel clock. " ++ "Requested %d kHz, got %lu kHz\n", ++ panel->timings.pixel_clock, pck); ++ ++ panel->timings.pixel_clock = pck; ++ } ++ ++ dispc_set_lcd_timings(&panel->timings); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++ ++static int dpi_display_enable(struct omap_display *display) ++{ ++ struct omap_panel *panel = display->panel; ++ int r; ++ int is_tft; ++ unsigned high, low, burst; ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ return -EINVAL; ++ } ++ ++ r = panel->enable(display); ++ if (r) ++ return r; ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dss_clk_enable(DSS_CLK_FCK2); ++ r = dsi_pll_init(0, 1); ++ if (r) ++ return r; ++#endif ++ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); ++ dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT : ++ OMAP_DSS_LCD_DISPLAY_STN); ++ dispc_set_tft_data_lines(display->hw_config.u.dpi.data_lines); ++ ++ dispc_set_burst_size(OMAP_DSS_GFX, OMAP_DSS_BURST_16x32); ++ dispc_set_burst_size(OMAP_DSS_VIDEO1, OMAP_DSS_BURST_16x32); ++ dispc_set_burst_size(OMAP_DSS_VIDEO2, OMAP_DSS_BURST_16x32); ++ ++ burst = 16 * 32 / 8; ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_GFX) - burst; ++ low = dispc_get_plane_fifo_size(OMAP_DSS_GFX) / 4; ++ dispc_setup_plane_fifo(OMAP_DSS_GFX, low, high); ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) - burst; ++ low = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) / 4; ++ dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, low, high); ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) - burst; ++ low = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) / 4; ++ dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, low, high); ++ ++ dpi_set_mode(display); ++ ++ mdelay(2); ++ ++ dispc_enable_lcd_out(1); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static int dpi_display_resume(struct omap_display *display); ++ ++static void dpi_display_disable(struct omap_display *display) ++{ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) ++ return; ++ ++ if (display->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ dpi_display_resume(display); ++ ++ display->panel->disable(display); ++ dispc_enable_lcd_out(0); ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dss_select_clk_source(0, 0); ++ dsi_pll_uninit(); ++ dss_clk_disable(DSS_CLK_FCK2); ++#endif ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++} ++ ++static int dpi_display_suspend(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EINVAL; ++ ++ if (display->panel->suspend) ++ display->panel->suspend(display); ++ ++ dispc_enable_lcd_out(0); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ display->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int dpi_display_resume(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ return -EINVAL; ++ ++ dispc_enable_lcd_out(1); ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ if (display->panel->resume) ++ display->panel->resume(display); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static void dpi_set_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ DSSDBG("dpi_set_timings\n"); ++ display->panel->timings = *timings; ++ if (display->state == OMAP_DSS_DISPLAY_ACTIVE) { ++ dpi_set_mode(display); ++ dispc_go(OMAP_DSS_CHANNEL_LCD); ++ } ++} ++ ++static int dpi_check_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ int is_tft; ++ int r; ++ int lck_div, pck_div; ++ unsigned long fck; ++ unsigned long pck; ++ ++ if (timings->hsw < 1 || timings->hsw > 64 || ++ timings->hfp < 1 || timings->hfp > 256 || ++ timings->hbp < 1 || timings->hbp > 256) { ++ return -EINVAL; ++ } ++ ++ if (timings->vsw < 1 || timings->vsw > 64 || ++ timings->vfp > 256 || timings->vbp > 256) { ++ return -EINVAL; ++ } ++ ++ if (timings->pixel_clock == 0) ++ return -EINVAL; ++ ++ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ { ++ struct dsi_clock_info cinfo; ++ r = dsi_pll_calc_pck(is_tft, timings->pixel_clock * 1000, ++ &cinfo); ++ ++ if (r) ++ return r; ++ ++ fck = cinfo.dispc_fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#else ++ { ++ struct dispc_clock_info cinfo; ++ r = dispc_calc_clock_div(is_tft, timings->pixel_clock * 1000, ++ &cinfo); ++ ++ if (r) ++ return r; ++ ++ fck = cinfo.fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#endif ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ timings->pixel_clock = pck; ++ ++ return 0; ++} ++ ++static void dpi_get_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ *timings = display->panel->timings; ++} ++ ++static int dpi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return -EINVAL; ++ ++ if (mode == OMAP_DSS_UPDATE_DISABLED) { ++ dispc_enable_lcd_out(0); ++ dpi.update_enabled = 0; ++ } else { ++ dispc_enable_lcd_out(1); ++ dpi.update_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode dpi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO : ++ OMAP_DSS_UPDATE_DISABLED; ++} ++ ++void dpi_init_display(struct omap_display *display) ++{ ++ DSSDBG("DPI init_display\n"); ++ ++ display->enable = dpi_display_enable; ++ display->disable = dpi_display_disable; ++ display->suspend = dpi_display_suspend; ++ display->resume = dpi_display_resume; ++ display->set_timings = dpi_set_timings; ++ display->check_timings = dpi_check_timings; ++ display->get_timings = dpi_get_timings; ++ display->set_update_mode = dpi_display_set_update_mode; ++ display->get_update_mode = dpi_display_get_update_mode; ++} ++ ++int dpi_init(void) ++{ ++ return 0; ++} ++ ++void dpi_exit(void) ++{ ++} ++ +diff --git a/arch/arm/plat-omap/dss/dsi.c b/arch/arm/plat-omap/dss/dsi.c +new file mode 100644 +index 0000000..e279571 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dsi.c +@@ -0,0 +1,3187 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dsi.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "DSI" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include "dss.h" ++ ++/*#define VERBOSE*/ ++/*#define VERBOSE_IRQ*/ ++/*#define MEASURE_PERF*/ ++ ++#define DSI_BASE 0x4804FC00 ++ ++struct dsi_reg { u16 idx; }; ++ ++#define DSI_REG(idx) ((const struct dsi_reg) { idx }) ++ ++#define DSI_SZ_REGS SZ_1K ++/* DSI Protocol Engine */ ++ ++#define DSI_REVISION DSI_REG(0x0000) ++#define DSI_SYSCONFIG DSI_REG(0x0010) ++#define DSI_SYSSTATUS DSI_REG(0x0014) ++#define DSI_IRQSTATUS DSI_REG(0x0018) ++#define DSI_IRQENABLE DSI_REG(0x001C) ++#define DSI_CTRL DSI_REG(0x0040) ++#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) ++#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) ++#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) ++#define DSI_CLK_CTRL DSI_REG(0x0054) ++#define DSI_TIMING1 DSI_REG(0x0058) ++#define DSI_TIMING2 DSI_REG(0x005C) ++#define DSI_VM_TIMING1 DSI_REG(0x0060) ++#define DSI_VM_TIMING2 DSI_REG(0x0064) ++#define DSI_VM_TIMING3 DSI_REG(0x0068) ++#define DSI_CLK_TIMING DSI_REG(0x006C) ++#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) ++#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) ++#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) ++#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) ++#define DSI_VM_TIMING4 DSI_REG(0x0080) ++#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) ++#define DSI_VM_TIMING5 DSI_REG(0x0088) ++#define DSI_VM_TIMING6 DSI_REG(0x008C) ++#define DSI_VM_TIMING7 DSI_REG(0x0090) ++#define DSI_STOPCLK_TIMING DSI_REG(0x0094) ++#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) ++#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) ++#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) ++#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) ++#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) ++#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) ++#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) ++ ++/* DSIPHY_SCP */ ++ ++#define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) ++#define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) ++#define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) ++#define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) ++ ++/* DSI_PLL_CTRL_SCP */ ++ ++#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) ++#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) ++#define DSI_PLL_GO DSI_REG(0x300 + 0x0008) ++#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) ++#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dsi_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) ++ ++/* Global interrupts */ ++#define DSI_IRQ_VC0 (1 << 0) ++#define DSI_IRQ_VC1 (1 << 1) ++#define DSI_IRQ_VC2 (1 << 2) ++#define DSI_IRQ_VC3 (1 << 3) ++#define DSI_IRQ_WAKEUP (1 << 4) ++#define DSI_IRQ_RESYNC (1 << 5) ++#define DSI_IRQ_PLL_LOCK (1 << 7) ++#define DSI_IRQ_PLL_UNLOCK (1 << 8) ++#define DSI_IRQ_PLL_RECALL (1 << 9) ++#define DSI_IRQ_COMPLEXIO_ERR (1 << 10) ++#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) ++#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) ++#define DSI_IRQ_TE_TRIGGER (1 << 16) ++#define DSI_IRQ_ACK_TRIGGER (1 << 17) ++#define DSI_IRQ_SYNC_LOST (1 << 18) ++#define DSI_IRQ_LDO_POWER_GOOD (1 << 19) ++#define DSI_IRQ_TA_TIMEOUT (1 << 20) ++#define DSI_IRQ_ERROR_MASK \ ++ (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ ++ DSI_IRQ_TA_TIMEOUT) ++#define DSI_IRQ_CHANNEL_MASK 0xf ++ ++/* Virtual channel interrupts */ ++#define DSI_VC_IRQ_CS (1 << 0) ++#define DSI_VC_IRQ_ECC_CORR (1 << 1) ++#define DSI_VC_IRQ_PACKET_SENT (1 << 2) ++#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) ++#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) ++#define DSI_VC_IRQ_BTA (1 << 5) ++#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) ++#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) ++#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) ++#define DSI_VC_IRQ_ERROR_MASK \ ++ (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ ++ DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ ++ DSI_VC_IRQ_FIFO_TX_UDF) ++ ++/* ComplexIO interrupts */ ++#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) ++#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) ++#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) ++#define DSI_CIO_IRQ_ERRESC1 (1 << 5) ++#define DSI_CIO_IRQ_ERRESC2 (1 << 6) ++#define DSI_CIO_IRQ_ERRESC3 (1 << 7) ++#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) ++#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) ++#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) ++#define DSI_CIO_IRQ_STATEULPS1 (1 << 15) ++#define DSI_CIO_IRQ_STATEULPS2 (1 << 16) ++#define DSI_CIO_IRQ_STATEULPS3 (1 << 17) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) ++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) ++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) ++ ++#define DSI_DT_DCS_SHORT_WRITE_0 0x05 ++#define DSI_DT_DCS_SHORT_WRITE_1 0x15 ++#define DSI_DT_DCS_READ 0x06 ++#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 ++#define DSI_DT_NULL_PACKET 0x09 ++#define DSI_DT_DCS_LONG_WRITE 0x39 ++ ++#define DSI_DT_RX_ACK_WITH_ERR 0x02 ++#define DSI_DT_RX_DCS_LONG_READ 0x1c ++#define DSI_DT_RX_SHORT_READ_1 0x21 ++#define DSI_DT_RX_SHORT_READ_2 0x22 ++ ++#define FINT_MAX 2100000 ++#define FINT_MIN 750000 ++#define REGN_MAX (1 << 7) ++#define REGM_MAX ((1 << 11) - 1) ++#define REGM3_MAX (1 << 4) ++#define REGM4_MAX (1 << 4) ++ ++enum fifo_size { ++ DSI_FIFO_SIZE_0 = 0, ++ DSI_FIFO_SIZE_32 = 1, ++ DSI_FIFO_SIZE_64 = 2, ++ DSI_FIFO_SIZE_96 = 3, ++ DSI_FIFO_SIZE_128 = 4, ++}; ++ ++static struct ++{ ++ void __iomem *base; ++ ++ unsigned long dsi1_pll_fclk; /* Hz */ ++ unsigned long dsi2_pll_fclk; /* Hz */ ++ unsigned long dsiphy; /* Hz */ ++ unsigned long ddr_clk; /* Hz */ ++ ++ u32 ctx[DSI_SZ_REGS / sizeof(u32)]; ++ ++ struct { ++ enum fifo_size fifo_size; ++ int dest_per; /* destination peripheral 0-3 */ ++ } vc[4]; ++ ++ struct mutex lock; ++ ++ unsigned pll_locked; ++ ++ struct completion bta_completion; ++ ++ spinlock_t update_lock; ++ int update_ongoing; ++ int update_syncers; ++ struct completion update_completion; ++ struct delayed_work framedone_work; ++ ++ enum omap_dss_update_mode user_update_mode; /* what the user wants */ ++ enum omap_dss_update_mode update_mode; /* current mode */ ++ int use_te; ++ int framedone_scheduled; /* helps to catch strange framedone bugs */ ++ ++ struct { ++ struct omap_display *display; ++ int x, y, w, h; ++ int bytespp; ++ } update_region; ++ ++ unsigned long cache_req_pck; ++ unsigned long cache_clk_freq; ++ struct dsi_clock_info cache_cinfo; ++ ++#ifdef MEASURE_PERF ++ ktime_t perf_setup_time; ++ ktime_t perf_start_time; ++ int perf_measure_frames; ++#endif ++} dsi; ++ ++static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) ++{ ++ __raw_writel(val, dsi.base + idx.idx); ++} ++ ++static inline u32 dsi_read_reg(const struct dsi_reg idx) ++{ ++ return __raw_readl(dsi.base + idx.idx); ++} ++ ++ ++#define SR(reg) \ ++ dsi.ctx[(DSI_##reg).idx / sizeof(u32)] = dsi_read_reg(DSI_##reg) ++#define RR(reg) \ ++ dsi_write_reg(DSI_##reg, dsi.ctx[(DSI_##reg).idx / sizeof(u32)]) ++ ++void dsi_save_context(void) ++{ ++ SR(SYSCONFIG); ++ SR(IRQENABLE); ++ SR(CTRL); ++ SR(COMPLEXIO_CFG1); ++ SR(COMPLEXIO_IRQ_ENABLE); ++ SR(CLK_CTRL); ++ SR(TIMING1); ++ SR(TIMING2); ++ SR(VM_TIMING1); ++ SR(VM_TIMING2); ++ SR(VM_TIMING3); ++ SR(CLK_TIMING); ++ SR(TX_FIFO_VC_SIZE); ++ SR(RX_FIFO_VC_SIZE); ++ SR(COMPLEXIO_CFG2); ++ SR(VM_TIMING4); ++ SR(VM_TIMING5); ++ SR(VM_TIMING6); ++ SR(VM_TIMING7); ++ SR(STOPCLK_TIMING); ++ ++ SR(VC_CTRL(0)); ++ SR(VC_TE(0)); ++ SR(VC_IRQENABLE(0)); ++ ++ SR(VC_CTRL(1)); ++ SR(VC_TE(1)); ++ SR(VC_IRQENABLE(1)); ++ ++ SR(VC_CTRL(2)); ++ SR(VC_TE(2)); ++ SR(VC_IRQENABLE(2)); ++ ++ SR(VC_CTRL(3)); ++ SR(VC_TE(3)); ++ SR(VC_IRQENABLE(3)); ++ ++ SR(DSIPHY_CFG0); ++ SR(DSIPHY_CFG1); ++ SR(DSIPHY_CFG2); ++ SR(DSIPHY_CFG5); ++ ++ SR(PLL_CONTROL); ++ SR(PLL_CONFIGURATION1); ++ SR(PLL_CONFIGURATION2); ++} ++ ++void dsi_restore_context(void) ++{ ++ RR(SYSCONFIG); ++ RR(IRQENABLE); ++ RR(CTRL); ++ RR(COMPLEXIO_CFG1); ++ RR(COMPLEXIO_IRQ_ENABLE); ++ RR(CLK_CTRL); ++ RR(TIMING1); ++ RR(TIMING2); ++ RR(VM_TIMING1); ++ RR(VM_TIMING2); ++ RR(VM_TIMING3); ++ RR(CLK_TIMING); ++ RR(TX_FIFO_VC_SIZE); ++ RR(RX_FIFO_VC_SIZE); ++ RR(COMPLEXIO_CFG2); ++ RR(VM_TIMING4); ++ RR(VM_TIMING5); ++ RR(VM_TIMING6); ++ RR(VM_TIMING7); ++ RR(STOPCLK_TIMING); ++ ++ RR(VC_CTRL(0)); ++ RR(VC_IRQENABLE(0)); ++ ++ RR(VC_CTRL(1)); ++ RR(VC_IRQENABLE(1)); ++ ++ RR(VC_CTRL(2)); ++ RR(VC_IRQENABLE(2)); ++ ++ RR(VC_CTRL(3)); ++ RR(VC_IRQENABLE(3)); ++ ++ RR(DSIPHY_CFG0); ++ RR(DSIPHY_CFG1); ++ RR(DSIPHY_CFG2); ++ RR(DSIPHY_CFG5); ++ ++ RR(PLL_CONTROL); ++ RR(PLL_CONFIGURATION1); ++ RR(PLL_CONFIGURATION2); ++} ++ ++#undef SR ++#undef RR ++ ++static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, ++ int value) ++{ ++ int t = 100000; ++ ++ while (REG_GET(idx, bitnum, bitnum) != value) { ++ if (--t == 0) ++ return !value; ++ } ++ ++ return value; ++} ++ ++ ++#ifdef MEASURE_PERF ++static void perf_mark_setup(void) ++{ ++ dsi.perf_setup_time = ktime_get(); ++} ++ ++static void perf_mark_start(void) ++{ ++ dsi.perf_start_time = ktime_get(); ++} ++ ++static void perf_show(const char *name) ++{ ++ ktime_t t, setup_time, trans_time; ++ u32 total_bytes; ++ u32 setup_us, trans_us, total_us; ++ const int numframes = 100; ++ static u32 s_trans_us, s_min_us = 0xffffffff, s_max_us; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) ++ return; ++ ++ t = ktime_get(); ++ ++ setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time); ++ setup_us = (u32)ktime_to_us(setup_time); ++ if (setup_us == 0) ++ setup_us = 1; ++ ++ trans_time = ktime_sub(t, dsi.perf_start_time); ++ trans_us = (u32)ktime_to_us(trans_time); ++ if (trans_us == 0) ++ trans_us = 1; ++ ++ total_us = setup_us + trans_us; ++ ++ total_bytes = dsi.update_region.w * ++ dsi.update_region.h * ++ dsi.update_region.bytespp; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { ++ dsi.perf_measure_frames++; ++ ++ if (trans_us < s_min_us) ++ s_min_us = trans_us; ++ ++ if (trans_us > s_max_us) ++ s_max_us = trans_us; ++ ++ s_trans_us += trans_us; ++ ++ if (dsi.perf_measure_frames < numframes) ++ return; ++ ++ DSSINFO("%s update: %d frames in %u us (min/max %u/%u), " ++ "%u fps\n", ++ name, numframes, ++ s_trans_us, ++ s_min_us, ++ s_max_us, ++ 1000*1000 / (s_trans_us / numframes)); ++ ++ dsi.perf_measure_frames = 0; ++ s_trans_us = 0; ++ s_min_us = 0xffffffff; ++ s_max_us = 0; ++ } else { ++ DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, " ++ "%u kbytes/sec\n", ++ name, ++ setup_us, ++ trans_us, ++ total_us, ++ 1000*1000 / total_us, ++ total_bytes, ++ total_bytes * 1000 / total_us); ++ } ++} ++#else ++#define perf_mark_setup() ++#define perf_mark_start() ++#define perf_show(x) ++#endif ++ ++ ++ ++ ++static void print_irq_status(u32 status) ++{ ++#ifndef VERBOSE_IRQ ++ if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) ++ return; ++#endif ++ printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DSI_IRQ_##x) \ ++ printk(#x " "); ++#ifdef VERBOSE_IRQ ++ PIS(VC0); ++ PIS(VC1); ++ PIS(VC2); ++ PIS(VC3); ++#endif ++ PIS(WAKEUP); ++ PIS(RESYNC); ++ PIS(PLL_LOCK); ++ PIS(PLL_UNLOCK); ++ PIS(PLL_RECALL); ++ PIS(COMPLEXIO_ERR); ++ PIS(HS_TX_TIMEOUT); ++ PIS(LP_RX_TIMEOUT); ++ PIS(TE_TRIGGER); ++ PIS(ACK_TRIGGER); ++ PIS(SYNC_LOST); ++ PIS(LDO_POWER_GOOD); ++ PIS(TA_TIMEOUT); ++#undef PIS ++ ++ printk("\n"); ++} ++ ++static void print_irq_status_vc(int channel, u32 status) ++{ ++#ifndef VERBOSE_IRQ ++ if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) ++ return; ++#endif ++ printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); ++ ++#define PIS(x) \ ++ if (status & DSI_VC_IRQ_##x) \ ++ printk(#x " "); ++ PIS(CS); ++ PIS(ECC_CORR); ++#ifdef VERBOSE_IRQ ++ PIS(PACKET_SENT); ++#endif ++ PIS(FIFO_TX_OVF); ++ PIS(FIFO_RX_OVF); ++ PIS(BTA); ++ PIS(ECC_NO_CORR); ++ PIS(FIFO_TX_UDF); ++ PIS(PP_BUSY_CHANGE); ++#undef PIS ++ printk("\n"); ++} ++ ++static void print_irq_status_cio(u32 status) ++{ ++ printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DSI_CIO_IRQ_##x) \ ++ printk(#x " "); ++ PIS(ERRSYNCESC1); ++ PIS(ERRSYNCESC2); ++ PIS(ERRSYNCESC3); ++ PIS(ERRESC1); ++ PIS(ERRESC2); ++ PIS(ERRESC3); ++ PIS(ERRCONTROL1); ++ PIS(ERRCONTROL2); ++ PIS(ERRCONTROL3); ++ PIS(STATEULPS1); ++ PIS(STATEULPS2); ++ PIS(STATEULPS3); ++ PIS(ERRCONTENTIONLP0_1); ++ PIS(ERRCONTENTIONLP1_1); ++ PIS(ERRCONTENTIONLP0_2); ++ PIS(ERRCONTENTIONLP1_2); ++ PIS(ERRCONTENTIONLP0_3); ++ PIS(ERRCONTENTIONLP1_3); ++ PIS(ULPSACTIVENOT_ALL0); ++ PIS(ULPSACTIVENOT_ALL1); ++#undef PIS ++ ++ printk("\n"); ++} ++ ++static int debug_irq; ++ ++/* called from dss */ ++void dsi_irq_handler(void) ++{ ++ u32 irqstatus, vcstatus, ciostatus; ++ int i; ++ ++ irqstatus = dsi_read_reg(DSI_IRQSTATUS); ++ ++ if (irqstatus & DSI_IRQ_ERROR_MASK) { ++ DSSERR("DSI error, irqstatus %x\n", irqstatus); ++ print_irq_status(irqstatus); ++ } else if (debug_irq) { ++ print_irq_status(irqstatus); ++ } ++ ++ for (i = 0; i < 4; ++i) { ++ if ((irqstatus & (1< 30*1000*1000) ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 21, 21); /* LP_RX_SYNCHRO_ENABLE */ ++ ++ return 0; ++} ++ ++ ++enum dsi_pll_power_state { ++ DSI_PLL_POWER_OFF = 0x0, ++ DSI_PLL_POWER_ON_HSCLK = 0x1, ++ DSI_PLL_POWER_ON_ALL = 0x2, ++ DSI_PLL_POWER_ON_DIV = 0x3, ++}; ++ ++static int dsi_pll_power(enum dsi_pll_power_state state) ++{ ++ int t = 0; ++ ++ REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ ++ ++ /* PLL_PWR_STATUS */ ++ while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { ++ udelay(1); ++ if (t++ > 1000) { ++ DSSERR("Failed to set DSI PLL power mode to %d\n", ++ state); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++int dsi_pll_calc_pck(int is_tft, unsigned long req_pck, ++ struct dsi_clock_info *cinfo) ++{ ++ struct dsi_clock_info cur, best; ++ int min_fck_per_pck; ++ int match = 0; ++ ++ if (req_pck == dsi.cache_req_pck && ++ dsi.cache_cinfo.clkin == dss_clk_get_rate(DSS_CLK_FCK2)) { ++ DSSDBG("DSI clock info found from cache\n"); ++ *cinfo = dsi.cache_cinfo; ++ return 0; ++ } ++ ++ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; ++ ++ if (min_fck_per_pck && ++ req_pck * min_fck_per_pck > DISPC_MAX_FCK) { ++ DSSERR("Requested pixel clock not possible with the current " ++ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " ++ "the constraint off.\n"); ++ min_fck_per_pck = 0; ++ } ++ ++ DSSDBG("dsi_pll_calc\n"); ++ ++retry: ++ memset(&best, 0, sizeof(best)); ++ ++ memset(&cur, 0, sizeof(cur)); ++ cur.clkin = dss_clk_get_rate(DSS_CLK_FCK2); ++ cur.use_dss2_fck = 1; ++ cur.highfreq = 0; ++ ++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ ++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ ++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ ++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { ++ if (cur.highfreq == 0) ++ cur.fint = cur.clkin / cur.regn; ++ else ++ cur.fint = cur.clkin / (2 * cur.regn); ++ ++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) ++ continue; ++ ++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ ++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { ++ unsigned long a, b; ++ ++ a = 2 * cur.regm * (cur.clkin/1000); ++ b = cur.regn * (cur.highfreq + 1); ++ cur.dsiphy = a / b * 1000; ++ ++ if (cur.dsiphy > 1800 * 1000 * 1000) ++ break; ++ ++ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ ++ for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; ++ ++cur.regm3) { ++ cur.dispc_fck = cur.dsiphy / cur.regm3; ++ ++ /* this will narrow down the search a bit, ++ * but still give pixclocks below what was ++ * requested */ ++ if (cur.dispc_fck < req_pck) ++ break; ++ ++ if (cur.dispc_fck > DISPC_MAX_FCK) ++ continue; ++ ++ if (min_fck_per_pck && ++ cur.dispc_fck < ++ req_pck * min_fck_per_pck) ++ continue; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, ++ cur.dispc_fck, ++ &cur.lck_div, ++ &cur.pck_div); ++ ++ cur.lck = cur.dispc_fck / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ if (abs(cur.pck - req_pck) < ++ abs(best.pck - req_pck)) { ++ best = cur; ++ ++ if (cur.pck == req_pck) ++ goto found; ++ } ++ } ++ } ++ } ++found: ++ if (!match) { ++ if (min_fck_per_pck) { ++ DSSERR("Could not find suitable clock settings.\n" ++ "Turning FCK/PCK constraint off and" ++ "trying again.\n"); ++ min_fck_per_pck = 0; ++ goto retry; ++ } ++ ++ DSSERR("Could not find suitable clock settings.\n"); ++ ++ return -EINVAL; ++ } ++ ++ /* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4 < 173MHz */ ++ /* hardcoded 48MHz for now. what should it be? */ ++ best.regm4 = best.dsiphy / 48000000; ++ if (best.regm4 > REGM4_MAX) ++ best.regm4 = REGM4_MAX; ++ best.dsi_fck = best.dsiphy / best.regm4; ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dsi.cache_req_pck = req_pck; ++ dsi.cache_clk_freq = 0; ++ dsi.cache_cinfo = best; ++ ++ return 0; ++} ++ ++static int dsi_pll_calc_ddrfreq(unsigned long clk_freq, ++ struct dsi_clock_info *cinfo) ++{ ++ struct dsi_clock_info cur, best; ++ const int use_dss2_fck = 1; ++ unsigned long datafreq; ++ ++ DSSDBG("dsi_pll_calc_ddrfreq\n"); ++ ++ if (clk_freq == dsi.cache_clk_freq && ++ dsi.cache_cinfo.clkin == dss_clk_get_rate(DSS_CLK_FCK2)) { ++ DSSDBG("DSI clock info found from cache\n"); ++ *cinfo = dsi.cache_cinfo; ++ return 0; ++ } ++ ++ datafreq = clk_freq * 4; ++ ++ memset(&best, 0, sizeof(best)); ++ ++ memset(&cur, 0, sizeof(cur)); ++ cur.use_dss2_fck = use_dss2_fck; ++ if (use_dss2_fck) { ++ cur.clkin = dss_clk_get_rate(DSS_CLK_FCK2); ++ cur.highfreq = 0; ++ } else { ++ cur.clkin = dispc_pclk_rate(); ++ if (cur.clkin < 32000000) ++ cur.highfreq = 0; ++ else ++ cur.highfreq = 1; ++ } ++ ++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ ++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ ++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ ++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { ++ if (cur.highfreq == 0) ++ cur.fint = cur.clkin / cur.regn; ++ else ++ cur.fint = cur.clkin / (2 * cur.regn); ++ ++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) ++ continue; ++ ++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ ++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { ++ unsigned long a, b; ++ ++ a = 2 * cur.regm * (cur.clkin/1000); ++ b = cur.regn * (cur.highfreq + 1); ++ cur.dsiphy = a / b * 1000; ++ ++ if (cur.dsiphy > 1800 * 1000 * 1000) ++ break; ++ ++ if (abs(cur.dsiphy - datafreq) < ++ abs(best.dsiphy - datafreq)) { ++ best = cur; ++ /* DSSDBG("best %ld\n", best.dsiphy); */ ++ } ++ ++ if (cur.dsiphy == datafreq) ++ goto found; ++ } ++ } ++found: ++ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ ++ /* hardcoded 48MHz for now. what should it be? */ ++ best.regm3 = best.dsiphy / (48000000); ++ if (best.regm3 > REGM3_MAX) ++ best.regm3 = REGM3_MAX; ++ best.dispc_fck = best.dsiphy / best.regm3; ++ ++ /* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4 < 173MHz */ ++ /* hardcoded 48MHz for now. what should it be? */ ++ best.regm4 = best.dsiphy / (48000000); ++ if (best.regm4 > REGM4_MAX) ++ best.regm4 = REGM4_MAX; ++ best.dsi_fck = best.dsiphy / best.regm4; ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dsi.cache_clk_freq = clk_freq; ++ dsi.cache_req_pck = 0; ++ dsi.cache_cinfo = best; ++ ++ return 0; ++} ++ ++int dsi_pll_program(struct dsi_clock_info *cinfo) ++{ ++ int r = 0; ++ u32 l; ++ ++ DSSDBG("dsi_pll_program\n"); ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ dsi.dsiphy = cinfo->dsiphy; ++ dsi.ddr_clk = dsi.dsiphy / 4; ++ dsi.dsi1_pll_fclk = cinfo->dispc_fck; ++ dsi.dsi2_pll_fclk = cinfo->dsi_fck; ++ ++ DSSDBG("DSI Fint %ld\n", cinfo->fint); ++ ++ DSSDBG("clkin (%s) rate %ld, highfreq %d\n", ++ cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", ++ cinfo->clkin, ++ cinfo->highfreq); ++ ++ /* DSIPHY == CLKIN4DDR */ ++ DSSDBG("DSIPHY = 2 * %d / %d * %lu / %d = %lu\n", ++ cinfo->regm, ++ cinfo->regn, ++ cinfo->clkin, ++ cinfo->highfreq + 1, ++ cinfo->dsiphy); ++ ++ DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", ++ dsi.dsiphy / 1000 / 1000 / 2); ++ ++ DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk); ++ ++ DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", ++ cinfo->regm3, cinfo->dispc_fck); ++ DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", ++ cinfo->regm4, cinfo->dsi_fck); ++ ++ REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION1); ++ l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ ++ l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ ++ l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ ++ l = FLD_MOD(l, cinfo->regm3 - 1, 22, 19); /* DSI_CLOCK_DIV */ ++ l = FLD_MOD(l, cinfo->regm4 - 1, 26, 23); /* DSIPROTO_CLOCK_DIV */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION1, l); ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); ++ l = FLD_MOD(l, 7, 4, 1); /* DSI_PLL_FREQSEL */ ++ /* DSI_PLL_CLKSEL */ ++ l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, 11, 11); ++ l = FLD_MOD(l, cinfo->highfreq, 12, 12); /* DSI_PLL_HIGHFREQ */ ++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ ++ l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ ++ l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); ++ ++ REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ ++ ++ if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { ++ DSSERR("dsi pll go bit not going down.\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { ++ DSSERR("cannot lock PLL\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ dsi.pll_locked = 1; ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); ++ l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ ++ l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ ++ l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ ++ l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ ++ l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ ++ l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ ++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ ++ l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ ++ l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ ++ l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ ++ l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ ++ l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ ++ l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ ++ l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); ++ ++ DSSDBG("PLL config done\n"); ++err: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ return r; ++} ++ ++int dsi_pll_init(int enable_hsclk, int enable_hsdiv) ++{ ++ int r = 0; ++ enum dsi_pll_power_state pwstate; ++ struct dispc_clock_info cinfo; ++ ++ DSSDBG("PLL init\n"); ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ /* configure dispc fck and pixel clock to something sane */ ++ r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo); ++ if (r) ++ return r; ++ ++ r = dispc_set_clock_div(&cinfo); ++ if (r) { ++ DSSERR("Failed to set basic clocks\n"); ++ return r; ++ } ++ ++ /* PLL does not come out of reset without this... */ ++ dispc_pck_free_enable(1); ++ ++ if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { ++ DSSERR("PLL not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ /* ... but if left on, we get problems when planes do not ++ * fill the whole display. No idea about this XXX */ ++ dispc_pck_free_enable(0); ++ ++ if (enable_hsclk && enable_hsdiv) ++ pwstate = DSI_PLL_POWER_ON_ALL; ++ else if (enable_hsclk) ++ pwstate = DSI_PLL_POWER_ON_HSCLK; ++ else if (enable_hsdiv) ++ pwstate = DSI_PLL_POWER_ON_DIV; ++ else ++ pwstate = DSI_PLL_POWER_OFF; ++ ++ r = dsi_pll_power(pwstate); ++ ++ if (r) ++ goto err; ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ DSSDBG("PLL init done\n"); ++ ++ return 0; ++err: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ return r; ++} ++ ++void dsi_pll_uninit(void) ++{ ++ dsi.pll_locked = 0; ++ dsi_pll_power(DSI_PLL_POWER_OFF); ++ DSSDBG("PLL uninit done\n"); ++} ++ ++unsigned long dsi_get_dsi1_pll_rate(void) ++{ ++ return dsi.dsi1_pll_fclk; ++} ++ ++unsigned long dsi_get_dsi2_pll_rate(void) ++{ ++ return dsi.dsi2_pll_fclk; ++} ++ ++ssize_t dsi_print_clocks(char *buf, ssize_t size) ++{ ++ ssize_t l = 0; ++ int clksel; ++ ++ enable_clocks(1); ++ ++ clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); ++ ++ l += snprintf(buf + l, size - l, "- dsi -\n"); ++ ++ l += snprintf(buf + l, size - l, "dsi fclk source = %s\n", ++ dss_get_dsi_clk_source() == 0 ? ++ "dss1_alwon_fclk" : "dsi2_pll_fclk"); ++ ++ l += snprintf(buf + l, size - l, "dsi pll source = %s\n", ++ clksel == 0 ? ++ "dss2_alwon_fclk" : "pclkfree"); ++ ++ l += snprintf(buf + l, size - l, ++ "DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n", ++ dsi.dsiphy, dsi.ddr_clk); ++ ++ l += snprintf(buf + l, size - l, ++ "dsi1_pll_fck\t%lu (%s)\n" ++ "dsi2_pll_fck\t%lu (%s)\n", ++ dsi.dsi1_pll_fclk, ++ dss_get_dispc_clk_source() == 0 ? "off" : "on", ++ dsi.dsi2_pll_fclk, ++ dss_get_dsi_clk_source() == 0 ? "off" : "on"); ++ ++ enable_clocks(0); ++ ++ return l; ++} ++ ++ ++enum dsi_complexio_power_state { ++ DSI_COMPLEXIO_POWER_OFF = 0x0, ++ DSI_COMPLEXIO_POWER_ON = 0x1, ++ DSI_COMPLEXIO_POWER_ULPS = 0x2, ++}; ++ ++static int dsi_complexio_power(enum dsi_complexio_power_state state) ++{ ++ int t = 0; ++ ++ /* PWR_CMD */ ++ REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); ++ ++ /* PWR_STATUS */ ++ while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { ++ udelay(1); ++ if (t++ > 1000) { ++ DSSERR("failed to set complexio power state to " ++ "%d\n", state); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static void dsi_complexio_config(struct omap_display *display) ++{ ++ u32 r; ++ ++ int clk_lane = display->hw_config.u.dsi.clk_lane; ++ int data1_lane = display->hw_config.u.dsi.data1_lane; ++ int data2_lane = display->hw_config.u.dsi.data2_lane; ++ int clk_pol = display->hw_config.u.dsi.clk_pol; ++ int data1_pol = display->hw_config.u.dsi.data1_pol; ++ int data2_pol = display->hw_config.u.dsi.data2_pol; ++ ++ r = dsi_read_reg(DSI_COMPLEXIO_CFG1); ++ r = FLD_MOD(r, clk_lane, 2, 0); ++ r = FLD_MOD(r, clk_pol, 3, 3); ++ r = FLD_MOD(r, data1_lane, 6, 4); ++ r = FLD_MOD(r, data1_pol, 7, 7); ++ r = FLD_MOD(r, data2_lane, 10, 8); ++ r = FLD_MOD(r, data2_pol, 11, 11); ++ dsi_write_reg(DSI_COMPLEXIO_CFG1, r); ++ ++ /* The configuration of the DSI complex I/O (number of data lanes, ++ position, differential order) should not be changed while ++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for ++ the hardware to take into account a new configuration of the complex ++ I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to ++ follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, ++ then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set ++ DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the ++ DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the ++ DSI complex I/O configuration is unknown. */ ++ ++ /* ++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); ++ REG_FLD_MOD(DSI_CTRL, 0, 0, 0); ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); ++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); ++ */ ++} ++ ++static inline int ns2ddr(int ns) ++{ ++ /* convert time in ns to ddr ticks, rounding up */ ++ return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000; ++} ++ ++static void dsi_complexio_timings(void) ++{ ++ u32 r; ++ u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; ++ u32 tlpx_half, tclk_trail, tclk_zero; ++ u32 tclk_prepare; ++ ++ /* calculate timings */ ++ ++ /* 1 * DDR_CLK = 2 * UI */ ++ ++ /* min 40ns + 4*UI max 85ns + 6*UI */ ++ ths_prepare = ns2ddr(59) + 2; ++ ++ /* min 145ns + 10*UI */ ++ ths_prepare_ths_zero = ns2ddr(145) + 5; ++ ++ /* min max(8*UI, 60ns+4*UI) */ ++ ths_trail = max(4, ns2ddr(60) + 2); ++ ++ /* min 100ns */ ++ ths_exit = ns2ddr(100); ++ ++ /* tlpx min 50n */ ++ tlpx_half = ns2ddr(25); ++ ++ /* min 60ns */ ++ tclk_trail = ns2ddr(60); ++ ++ /* min 38ns, max 95ns */ ++ tclk_prepare = ns2ddr(38); ++ ++ /* min tclk-prepare + tclk-zero = 300ns */ ++ tclk_zero = ns2ddr(300 - 38); ++ ++#ifdef VERBOSE ++ DSSDBG("ths_prepare %d, ths_prepare_ths_zero %d\n", ++ ths_prepare, ths_prepare_ths_zero); ++ DSSDBG("ths_trail %d, ths_exit %d\n", ths_trail, ths_exit); ++ ++ ++ DSSDBG("tlpx_half %d, tclk_trail %d, tclk_zero %d\n", tlpx_half, ++ tclk_trail, tclk_zero); ++ DSSDBG("tclk_prepare %d\n", tclk_prepare); ++#endif ++ ++ /* program timings */ ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG0); ++ r = FLD_MOD(r, ths_prepare, 31, 24); ++ r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); ++ r = FLD_MOD(r, ths_trail, 15, 8); ++ r = FLD_MOD(r, ths_exit, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG0, r); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG1); ++ r = FLD_MOD(r, tlpx_half, 22, 16); ++ r = FLD_MOD(r, tclk_trail, 15, 8); ++ r = FLD_MOD(r, tclk_zero, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG1, r); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG2); ++ r = FLD_MOD(r, tclk_prepare, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG2, r); ++} ++ ++ ++static int dsi_complexio_init(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_complexio_init\n"); ++ ++ /* CIO_CLK_ICG, enable L3 clk to CIO */ ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); ++ ++ /* A dummy read using the SCP interface to any DSIPHY register is ++ * required after DSIPHY reset to complete the reset of the DSI complex ++ * I/O. */ ++ dsi_read_reg(DSI_DSIPHY_CFG5); ++ ++ if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) { ++ DSSERR("ComplexIO PHY not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ dsi_complexio_config(display); ++ ++ r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); ++ ++ if (r) ++ goto err; ++ ++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { ++ DSSERR("ComplexIO not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { ++ DSSERR("ComplexIO LDO power down.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ dsi_complexio_timings(); ++ ++ /* ++ The configuration of the DSI complex I/O (number of data lanes, ++ position, differential order) should not be changed while ++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the ++ hardware to recognize a new configuration of the complex I/O (done ++ in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow ++ this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next ++ reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] ++ LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN ++ bit to 1. If the sequence is not followed, the DSi complex I/O ++ configuration is undetermined. ++ */ ++ dsi_if_enable(1); ++ dsi_if_enable(0); ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ ++ dsi_if_enable(1); ++ dsi_if_enable(0); ++ ++ DSSDBG("CIO init done\n"); ++err: ++ return r; ++} ++ ++static void dsi_complexio_uninit(void) ++{ ++ dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); ++} ++ ++ ++ ++static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, ++ enum fifo_size size3, enum fifo_size size4) ++{ ++ u32 r = 0; ++ int add = 0; ++ int i; ++ ++ dsi.vc[0].fifo_size = size1; ++ dsi.vc[1].fifo_size = size2; ++ dsi.vc[2].fifo_size = size3; ++ dsi.vc[3].fifo_size = size4; ++ ++ for (i = 0; i < 4; i++) { ++ u8 v; ++ int size = dsi.vc[i].fifo_size; ++ ++ if (add + size > 4) { ++ DSSERR("Illegal FIFO configuration\n"); ++ BUG(); ++ } ++ ++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); ++ r |= v << (8 * i); ++ /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ ++ add += size; ++ } ++ ++ dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); ++} ++ ++static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, ++ enum fifo_size size3, enum fifo_size size4) ++{ ++ u32 r = 0; ++ int add = 0; ++ int i; ++ ++ dsi.vc[0].fifo_size = size1; ++ dsi.vc[1].fifo_size = size2; ++ dsi.vc[2].fifo_size = size3; ++ dsi.vc[3].fifo_size = size4; ++ ++ for (i = 0; i < 4; i++) { ++ u8 v; ++ int size = dsi.vc[i].fifo_size; ++ ++ if (add + size > 4) { ++ DSSERR("Illegal FIFO configuration\n"); ++ BUG(); ++ } ++ ++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); ++ r |= v << (8 * i); ++ /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ ++ add += size; ++ } ++ ++ dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); ++} ++ ++static int dsi_force_tx_stop_mode_io(void) ++{ ++ u32 r; ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { ++ DSSERR("TX_STOP bit not going down\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void dsi_vc_print_status(int channel) ++{ ++ u32 r; ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " ++ "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", ++ channel, ++ FLD_GET(r, 5, 5), ++ FLD_GET(r, 6, 6), ++ FLD_GET(r, 15, 15), ++ FLD_GET(r, 16, 16), ++ FLD_GET(r, 20, 20)); ++ ++ r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); ++ DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); ++} ++ ++static void dsi_vc_config(int channel) ++{ ++ u32 r; ++ ++ DSSDBG("dsi_vc_config %d\n", channel); ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ ++ r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ ++ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ ++ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ ++ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ ++ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ ++ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ ++ r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ ++ ++ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ ++ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ ++ ++ dsi_write_reg(DSI_VC_CTRL(channel), r); ++} ++ ++static void dsi_vc_config_vp(int channel) ++{ ++ u32 r; ++ ++ DSSDBG("dsi_vc_config_vp\n"); ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ ++ r = FLD_MOD(r, 1, 1, 1); /* SOURCE, 1 = video port */ ++ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ ++ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ ++ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ ++ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ ++ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ ++ r = FLD_MOD(r, 1, 9, 9); /* MODE_SPEED, high speed on/off */ ++ ++ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ ++ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ ++ ++ dsi_write_reg(DSI_VC_CTRL(channel), r); ++} ++ ++ ++static int dsi_vc_enable(int channel, int enable) ++{ ++ DSSDBG("dsi_vc_enable channel %d, enable %d\n", channel, enable); ++ ++ enable = enable ? 1 : 0; ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); ++ ++ if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { ++ DSSERR("Failed to set dsi_vc_enable to %d\n", enable); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void dsi_vc_enable_hs(int channel, int enable) ++{ ++ DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); ++ ++ dsi_vc_enable(channel, 0); ++ dsi_if_enable(0); ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); ++ ++ dsi_vc_enable(channel, 1); ++ dsi_if_enable(1); ++ ++ dsi_force_tx_stop_mode_io(); ++} ++ ++static void dsi_vc_flush_long_data(int channel) ++{ ++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { ++ u32 val; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", ++ (val >> 0) & 0xff, ++ (val >> 8) & 0xff, ++ (val >> 16) & 0xff, ++ (val >> 24) & 0xff); ++ } ++} ++ ++static u16 dsi_vc_flush_receive_data(int channel) ++{ ++ /* RX_FIFO_NOT_EMPTY */ ++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { ++ u32 val; ++ u8 dt; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ DSSDBG("\trawval %#08x\n", val); ++ dt = FLD_GET(val, 7, 0); ++ if (dt == DSI_DT_RX_ACK_WITH_ERR) { ++ u16 err = FLD_GET(val, 23, 8); ++ DSSERR("\tACK with ERROR: %#x\n", err); ++ if (err & (1 << 9)) ++ DSSERR("\t\tECC multibit\n"); ++ if (err & (1 << 11)) ++ DSSERR("\t\tData type not recognized\n"); ++ if (err & (1 << 12)) ++ DSSERR("\t\tInvalid VC ID\n"); ++ ++ } else if (dt == DSI_DT_RX_SHORT_READ_1) { ++ DSSDBG("\tDCS short response, 1 byte: %#x\n", ++ FLD_GET(val, 23, 8)); ++ return FLD_GET(val, 23, 8); ++ } else if (dt == DSI_DT_RX_SHORT_READ_2) { ++ DSSDBG("\tDCS short response, 2 byte: %#x\n", ++ FLD_GET(val, 23, 8)); ++ return FLD_GET(val, 23, 8); ++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { ++ DSSDBG("\tDCS long response, len %d\n", ++ FLD_GET(val, 23, 8)); ++ dsi_vc_flush_long_data(channel); ++ } else { ++ DSSERR("\tunknown datatype\n"); ++ } ++ } ++ return 0; ++} ++ ++static int dsi_vc_send_bta(int channel) ++{ ++ unsigned long tmo; ++ ++ /*DSSDBG("dsi_vc_send_bta_sync %d\n", channel); */ ++ ++ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ ++ DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); ++ dsi_vc_flush_receive_data(channel); ++ } ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ ++ ++ tmo = jiffies + msecs_to_jiffies(10); ++ while (REG_GET(DSI_VC_CTRL(channel), 6, 6) == 1) { ++ if (time_after(jiffies, tmo)) { ++ DSSERR("Failed to send BTA\n"); ++ return -EIO; ++ } ++ } ++ ++ return 0; ++} ++ ++static int dsi_vc_send_bta_sync(int channel) ++{ ++ int r = 0; ++ ++ init_completion(&dsi.bta_completion); ++ ++ dsi_vc_enable_bta_irq(channel); ++ ++ r = dsi_vc_send_bta(channel); ++ if (r) ++ goto err; ++ ++ if (wait_for_completion_timeout(&dsi.bta_completion, ++ msecs_to_jiffies(500)) == 0) { ++ DSSERR("Failed to receive BTA\n"); ++ r = -EIO; ++ goto err; ++ } ++err: ++ dsi_vc_disable_bta_irq(channel); ++ ++ return r; ++} ++ ++static inline void dsi_vc_write_long_header(int channel, u8 data_type, ++ u16 len, u8 ecc) ++{ ++ u32 val; ++ u8 data_id; ++ ++ /*data_id = data_type | channel << 6; */ ++ data_id = data_type | dsi.vc[channel].dest_per << 6; ++ ++ val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | ++ FLD_VAL(ecc, 31, 24); ++ ++ dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); ++} ++ ++static inline void dsi_vc_write_long_payload(int channel, ++ u8 b1, u8 b2, u8 b3, u8 b4) ++{ ++ u32 val; ++ ++ val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; ++ ++/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", ++ b1, b2, b3, b4, val); */ ++ ++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); ++} ++ ++static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, ++ u8 ecc) ++{ ++ /*u32 val; */ ++ int i; ++ u8 *p; ++ int r = 0; ++ u8 b1, b2, b3, b4; ++ ++ /*DSSDBG("dsi_vc_send_long, %d bytes\n", len); */ ++ ++ /* len + header */ ++ if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { ++ DSSERR("unable to send long packet: packet too long.\n"); ++ return -EINVAL; ++ } ++ ++ dsi_vc_write_long_header(channel, data_type, len, ecc); ++ ++ /*dsi_vc_print_status(0); */ ++ ++ p = data; ++ for (i = 0; i < len >> 2; i++) { ++ /*DSSDBG("\tsending full packet %d\n", i); */ ++ /*dsi_vc_print_status(0); */ ++ ++ b1 = *p++; ++ b2 = *p++; ++ b3 = *p++; ++ b4 = *p++; ++ ++ dsi_vc_write_long_payload(channel, b1, b2, b3, b4); ++ } ++ ++ i = len % 4; ++ if (i) { ++ b1 = 0; b2 = 0; b3 = 0; ++ ++ /*DSSDBG("\tsending remainder bytes %d\n", i); */ ++ ++ switch (i) { ++ case 3: ++ b1 = *p++; ++ b2 = *p++; ++ b3 = *p++; ++ break; ++ case 2: ++ b1 = *p++; ++ b2 = *p++; ++ break; ++ case 1: ++ b1 = *p++; ++ break; ++ } ++ ++ dsi_vc_write_long_payload(channel, b1, b2, b3, 0); ++ } ++ ++ return r; ++} ++ ++static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) ++{ ++ u32 r; ++ u8 data_id; ++/* ++ DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", ++ channel, ++ data_type, data & 0xff, (data >> 8) & 0xff); ++*/ ++ if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { ++ DSSERR("ERROR FIFO FULL, aborting transfer\n"); ++ return -EINVAL; ++ } ++ ++ data_id = data_type | channel << 6; ++ ++ r = (data_id << 0) | (data << 8) | (ecc << 24); ++ ++ dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); ++ ++ return 0; ++} ++ ++int dsi_vc_send_null(int channel) ++{ ++ u8 nullpkg[] = {0, 0, 0, 0}; ++ return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); ++} ++EXPORT_SYMBOL(dsi_vc_send_null); ++ ++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) ++{ ++ int r; ++ ++ BUG_ON(len == 0); ++ ++ if (len == 1) { ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, ++ data[0], 0); ++ } else if (len == 2) { ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, ++ data[0] | (data[1] << 8), 0); ++ } else { ++ /* 0x39 = DCS Long Write */ ++ r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, ++ data, len, 0); ++ } ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); ++ ++int dsi_vc_dcs_write(int channel, u8 *data, int len) ++{ ++ int r; ++ ++ r = dsi_vc_dcs_write_nosync(channel, data, len); ++ if (r) ++ return r; ++ ++ /* Some devices need time to process the msg in low power mode. ++ This also makes the write synchronous, and checks that ++ the peripheral is still alive */ ++ r = dsi_vc_send_bta_sync(channel); ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_dcs_write); ++ ++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) ++{ ++ u32 val; ++ u8 dt; ++ int debug = 0; ++ ++ if (debug) ++ DSSDBG("dsi_vc_dcs_read\n"); ++ ++ dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); ++ ++ dsi_vc_send_bta_sync(channel); ++ ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ if (debug) ++ DSSDBG("\trawval %#08x\n", val); ++ dt = FLD_GET(val, 7, 0); ++ if (dt == DSI_DT_RX_ACK_WITH_ERR) { ++ u16 err = FLD_GET(val, 23, 8); ++ DSSERR("\tACK with ERROR: %#x\n", err); ++ if (err & (1 << 9)) ++ DSSERR("\t\tECC multibit\n"); ++ if (err & (1 << 11)) ++ DSSERR("\t\tData type not recognized\n"); ++ if (err & (1 << 12)) ++ DSSERR("\t\tInvalid VC ID\n"); ++ return -1; ++ ++ } else if (dt == DSI_DT_RX_SHORT_READ_1) { ++ u8 data = FLD_GET(val, 15, 8); ++ if (debug) ++ DSSDBG("\tDCS short response, 1 byte: %#x\n", data); ++ ++ if (buflen < 1) ++ return -1; ++ ++ buf[0] = data; ++ ++ return 1; ++ } else if (dt == DSI_DT_RX_SHORT_READ_2) { ++ u16 data = FLD_GET(val, 23, 8); ++ if (debug) ++ DSSDBG("\tDCS short response, 2 byte: %#x\n", data); ++ ++ if (buflen < 2) ++ return -1; ++ ++ buf[0] = data & 0xff; ++ buf[1] = (data >> 8) & 0xff; ++ ++ return 2; ++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { ++ int x; ++ int len = FLD_GET(val, 23, 8); ++ if (debug) ++ DSSDBG("\tDCS long response, len %d\n", len); ++ ++ if (len > buflen) ++ return -1; ++ ++ x = 0; ++ while (x < len) { ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ if (debug) ++ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 " ++ "%#02x\n", ++ (val >> 0) & 0xff, ++ (val >> 8) & 0xff, ++ (val >> 16) & 0xff, ++ (val >> 24) & 0xff); ++ ++ if (x < len) ++ buf[x++] = (val >> 0) & 0xff; ++ if (x < len) ++ buf[x++] = (val >> 8) & 0xff; ++ if (x < len) ++ buf[x++] = (val >> 16) & 0xff; ++ if (x < len) ++ buf[x++] = (val >> 24) & 0xff; ++ } ++ ++ return len; ++ } else { ++ DSSERR("\tunknown datatype\n"); ++ return -1; ++ } ++} ++EXPORT_SYMBOL(dsi_vc_dcs_read); ++ ++ ++int dsi_vc_set_max_rx_packet_size(int channel, u16 len) ++{ ++ return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, ++ len, 0); ++} ++EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); ++ ++ ++static int dsi_set_lp_rx_timeout(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("LP_TX_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING2); ++ r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ ++ r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ ++ r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ ++ r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ ++ dsi_write_reg(DSI_TIMING2, r); ++ ++ DSSDBG("LP_RX_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_ta_timeout(int ns, int x8, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("TA_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ ++ r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ ++ r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ ++ r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ DSSDBG("TA_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_stop_state_counter(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("STOP_STATE_COUNTER_IO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ ++ r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ ++ r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ ++ r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ DSSDBG("STOP_STATE_COUNTER %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_hs_tx_timeout(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in TxByteClkHS */ ++ ++ fck = dsi.ddr_clk / 4; ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("HS_TX_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING2); ++ r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ ++ r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ ++ r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ ++ r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ ++ dsi_write_reg(DSI_TIMING2, r); ++ ++ DSSDBG("HS_TX_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++static int dsi_proto_config(struct omap_display *display) ++{ ++ u32 r; ++ int buswidth = 0; ++ ++ dsi_config_tx_fifo(DSI_FIFO_SIZE_128, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0); ++ ++ dsi_config_rx_fifo(DSI_FIFO_SIZE_128, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0); ++ ++ /* XXX what values for the timeouts? */ ++ dsi_set_stop_state_counter(1000, 0, 0); ++ ++ dsi_set_ta_timeout(50000, 1, 1); ++ ++ /* 3000ns * 16 */ ++ dsi_set_lp_rx_timeout(3000, 0, 1); ++ ++ /* 10000ns * 4 */ ++ dsi_set_hs_tx_timeout(10000, 1, 0); ++ ++ switch (display->ctrl->pixel_size) { ++ case 16: ++ buswidth = 0; ++ break; ++ case 18: ++ buswidth = 1; ++ break; ++ case 24: ++ buswidth = 2; ++ break; ++ default: ++ BUG(); ++ } ++ ++ r = dsi_read_reg(DSI_CTRL); ++ r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ ++ r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ ++ r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ ++ /* XXX what should the ratio be */ ++ r = FLD_MOD(r, 0, 4, 4); /* VP_CLK_RATIO, VP_PCLK = VP_CLK/2 */ ++ r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ ++ r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ ++ r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ ++ r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ ++ r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ ++ r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ ++ r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ ++ ++ dsi_write_reg(DSI_CTRL, r); ++ ++ /* we configure vc0 for L4 communication, and ++ * vc1 for dispc */ ++ dsi_vc_config(0); ++ dsi_vc_config_vp(1); ++ ++ /* set all vc targets to peripheral 0 */ ++ dsi.vc[0].dest_per = 0; ++ dsi.vc[1].dest_per = 0; ++ dsi.vc[2].dest_per = 0; ++ dsi.vc[3].dest_per = 0; ++ ++ return 0; ++} ++ ++static void dsi_proto_timings(void) ++{ ++ int tlpx_half, tclk_zero, tclk_prepare, tclk_trail; ++ int tclk_pre, tclk_post; ++ int ddr_clk_pre, ddr_clk_post; ++ u32 r; ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG1); ++ tlpx_half = FLD_GET(r, 22, 16); ++ tclk_trail = FLD_GET(r, 15, 8); ++ tclk_zero = FLD_GET(r, 7, 0); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG2); ++ tclk_prepare = FLD_GET(r, 7, 0); ++ ++ /* min 8*UI */ ++ tclk_pre = 20; ++ /* min 60ns + 52*UI */ ++ tclk_post = ns2ddr(60) + 26; ++ ++ ddr_clk_pre = (tclk_pre + tlpx_half*2 + tclk_zero + tclk_prepare) / 4; ++ ddr_clk_post = (tclk_post + tclk_trail) / 4; ++ ++ r = dsi_read_reg(DSI_CLK_TIMING); ++ r = FLD_MOD(r, ddr_clk_pre, 15, 8); ++ r = FLD_MOD(r, ddr_clk_post, 7, 0); ++ dsi_write_reg(DSI_CLK_TIMING, r); ++ ++#ifdef VERBOSE ++ DSSDBG("ddr_clk_pre %d, ddr_clk_post %d\n", ++ ddr_clk_pre, ++ ddr_clk_post); ++#endif ++} ++ ++ ++#define DSI_DECL_VARS \ ++ int __dsi_cb = 0; u32 __dsi_cv = 0; ++ ++#define DSI_FLUSH(ch) \ ++ if (__dsi_cb > 0) { \ ++ /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ ++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ ++ __dsi_cb = __dsi_cv = 0; \ ++ } ++ ++#define DSI_PUSH(ch, data) \ ++ do { \ ++ __dsi_cv |= (data) << (__dsi_cb * 8); \ ++ /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ ++ if (++__dsi_cb > 3) \ ++ DSI_FLUSH(ch); \ ++ } while (0) ++ ++static int dsi_update_screen_l4(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ /* Note: supports only 24bit colors in 32bit container */ ++ int first = 1; ++ int fifo_stalls = 0; ++ int max_dsi_packet_size; ++ int max_data_per_packet; ++ int max_pixels_per_packet; ++ int pixels_left; ++ int bytespp = 3; ++ int scr_width; ++ u32 *data; ++ int start_offset; ++ int horiz_inc; ++ int current_x; ++ struct omap_overlay *ovl; ++ ++ debug_irq = 0; ++ ++ DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ ovl = &display->manager->overlays[0]; ++ ++ if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) ++ return -EINVAL; ++ ++ if (display->ctrl->pixel_size != 24) ++ return -EINVAL; ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ scr_width = ovl->info.screen_width; ++ data = ovl->info.vaddr; ++ ++ start_offset = scr_width * y + x; ++ horiz_inc = scr_width - w; ++ current_x = x; ++ ++ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes ++ * in fifo */ ++ ++ /* When using CPU, max long packet size is TX buffer size */ ++ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; ++ ++ /* we seem to get better perf if we divide the tx fifo to half, ++ and while the other half is being sent, we fill the other half ++ max_dsi_packet_size /= 2; */ ++ ++ max_data_per_packet = max_dsi_packet_size - 4 - 1; ++ ++ max_pixels_per_packet = max_data_per_packet / bytespp; ++ ++ DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ pixels_left = w * h; ++ ++ DSSDBG("total pixels %d\n", pixels_left); ++ ++ data += start_offset; ++ ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = bytespp; ++ ++ perf_mark_start(); ++ ++ while (pixels_left > 0) { ++ /* 0x2c = write_memory_start */ ++ /* 0x3c = write_memory_continue */ ++ u8 dcs_cmd = first ? 0x2c : 0x3c; ++ int pixels; ++ DSI_DECL_VARS; ++ first = 0; ++ ++#if 1 ++ /* using fifo not empty */ ++ /* TX_FIFO_NOT_EMPTY */ ++ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { ++ udelay(1); ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return -EIO; ++ } ++ } ++#elif 1 ++ /* using fifo emptiness */ ++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < ++ max_dsi_packet_size) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return -EIO; ++ } ++ } ++#else ++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return -EIO; ++ } ++ } ++#endif ++ pixels = min(max_pixels_per_packet, pixels_left); ++ ++ pixels_left -= pixels; ++ ++ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, ++ 1 + pixels * bytespp, 0); ++ ++ DSI_PUSH(0, dcs_cmd); ++ ++ while (pixels-- > 0) { ++ u32 pix = *data++; ++ ++ DSI_PUSH(0, (pix >> 16) & 0xff); ++ DSI_PUSH(0, (pix >> 8) & 0xff); ++ DSI_PUSH(0, (pix >> 0) & 0xff); ++ ++ current_x++; ++ if (current_x == x+w) { ++ current_x = x; ++ data += horiz_inc; ++ } ++ } ++ ++ DSI_FLUSH(0); ++ } ++ ++ perf_show("L4"); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ return 0; ++} ++ ++#if 0 ++static void dsi_clear_screen_l4(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ int first = 1; ++ int fifo_stalls = 0; ++ int max_dsi_packet_size; ++ int max_data_per_packet; ++ int max_pixels_per_packet; ++ int pixels_left; ++ int bytespp = 3; ++ int pixnum; ++ ++ debug_irq = 0; ++ ++ DSSDBG("dsi_clear_screen_l4 (%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ if (display->ctrl->bpp != 24) ++ return -EINVAL; ++ ++ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) ++ * bytes in fifo */ ++ ++ /* When using CPU, max long packet size is TX buffer size */ ++ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; ++ ++ max_data_per_packet = max_dsi_packet_size - 4 - 1; ++ ++ max_pixels_per_packet = max_data_per_packet / bytespp; ++ ++ enable_clocks(1); ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ pixels_left = w * h; ++ ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = bytespp; ++ ++ start_measuring(); ++ ++ pixnum = 0; ++ ++ while (pixels_left > 0) { ++ /* 0x2c = write_memory_start */ ++ /* 0x3c = write_memory_continue */ ++ u8 dcs_cmd = first ? 0x2c : 0x3c; ++ int pixels; ++ DSI_DECL_VARS; ++ first = 0; ++ ++ /* TX_FIFO_NOT_EMPTY */ ++ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow\n"); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return; ++ } ++ } ++ ++ pixels = min(max_pixels_per_packet, pixels_left); ++ ++ pixels_left -= pixels; ++ ++ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, ++ 1 + pixels * bytespp, 0); ++ ++ DSI_PUSH(0, dcs_cmd); ++ ++ while (pixels-- > 0) { ++ u32 pix; ++ ++ pix = 0x000000; ++ ++ DSI_PUSH(0, (pix >> 16) & 0xff); ++ DSI_PUSH(0, (pix >> 8) & 0xff); ++ DSI_PUSH(0, (pix >> 0) & 0xff); ++ } ++ ++ DSI_FLUSH(0); ++ } ++ ++ enable_clocks(0); ++ ++ end_measuring("L4 CLEAR"); ++} ++#endif ++ ++static int dsi_wait_for_framedone(int stop_update) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ if (dsi.update_ongoing) { ++ long wait = msecs_to_jiffies(1000); ++ dsi.update_syncers++; ++ if (stop_update) ++ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ wait = wait_for_completion_timeout(&dsi.update_completion, ++ wait); ++ if (wait == 0) { ++ DSSERR("timeout waiting sync\n"); ++ return -ETIME; ++ } ++ } else { ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ } ++ ++ return 0; ++} ++ ++static void dsi_setup_update_dispc(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ int bytespp = 3; ++ ++ DSSDBG("dsi_setup_update_dispc(%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ dsi.update_region.display = display; ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = bytespp; ++ ++ enable_clocks(1); ++ ++ dispc_setup_partial_planes(display, &x, &y, &w, &h); ++ ++ dispc_set_lcd_size(w, h); ++ ++ enable_clocks(0); ++} ++ ++static void dsi_update_screen_dispc(struct omap_display *display) ++{ ++ int bytespp = 3; ++ int total_len; ++ int line_packet_len; ++ int x, y, w, h; ++ u32 l; ++ ++ x = dsi.update_region.x; ++ y = dsi.update_region.y; ++ w = dsi.update_region.w; ++ h = dsi.update_region.h; ++ ++ if (dsi.user_update_mode != OMAP_DSS_UPDATE_AUTO) ++ DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ /* TODO: one packet could be longer, I think? Max is the line buffer */ ++ line_packet_len = w * bytespp + 1; /* 1 byte for DCS cmd */ ++ total_len = line_packet_len * h; ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ if (0) ++ dsi_vc_print_status(1); ++ ++ perf_mark_start(); ++ ++ l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ ++ dsi_write_reg(DSI_VC_TE(1), l); ++ ++ dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, line_packet_len, 0); ++ ++ if (dsi.use_te) ++ l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ ++ else ++ l = FLD_MOD(l, 1, 31, 31); /* TE_START */ ++ dsi_write_reg(DSI_VC_TE(1), l); ++ ++ dispc_enable_lcd_out(1); ++ ++ if (dsi.use_te) ++ dsi_vc_send_bta(1); ++} ++ ++static void framedone_callback(void *data, u32 mask) ++{ ++ if (dsi.framedone_scheduled) { ++ DSSERR("Framedone already scheduled. Bogus FRAMEDONE IRQ?\n"); ++ return; ++ } ++ ++ dsi.framedone_scheduled = 1; ++ ++ /* We get FRAMEDONE when DISPC has finished sending pixels and turns ++ * itself off. However, DSI still has the pixels in its buffers, and ++ * is sending the data. Thus we have to wait until we can do a new ++ * transfer or turn the clocks off. We do that in a separate work ++ * func. */ ++ /* XXX When using auto update and delay value 0, the kernel seems to be ++ * very relaxed about when to call our callback. It may take a second. ++ * Thus we use a delay of 1 */ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ schedule_delayed_work(&dsi.framedone_work, 1); ++ else ++ schedule_delayed_work(&dsi.framedone_work, 0); ++} ++ ++static void framedone_worker(struct work_struct *work) ++{ ++ unsigned long flags; ++ u32 l; ++ unsigned long tmo; ++ int i = 0; ++ ++ l = REG_GET(DSI_VC_TE(1), 23, 0); /* TE_SIZE */ ++ ++ /* There shouldn't be much stuff in DSI buffers, if any, so we'll ++ * just busyloop */ ++ if (l > 0) { ++ tmo = jiffies + msecs_to_jiffies(50); ++ while (REG_GET(DSI_VC_TE(1), 23, 0) > 0) { /* TE_SIZE */ ++ i++; ++ if (time_after(jiffies, tmo)) { ++ DSSERR("timeout waiting TE_SIZE to zero\n"); ++ break; ++ } ++ cpu_relax(); ++ } ++ } ++ ++ if (REG_GET(DSI_VC_TE(1), 30, 30)) ++ DSSERR("TE_EN not zero\n"); ++ ++ if (REG_GET(DSI_VC_TE(1), 31, 31)) ++ DSSERR("TE_START not zero\n"); ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ if (dsi.update_ongoing == 0) { ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ DSSERR("framedone irq without update request\n"); ++ return; ++ } ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ ++ perf_show("DISPC"); ++ ++ if (dsi.user_update_mode != OMAP_DSS_UPDATE_AUTO) ++ DSSDBG("FRAMEDONE\n"); ++ ++#if 0 ++ if (l) ++ DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); ++#else ++ if (l > 1024*3) ++ DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); ++#endif ++ ++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC ++ dispc_fake_vsync_irq(); ++#endif ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ dsi.framedone_scheduled = 0; ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) ++ dsi.update_ongoing = 0; ++ ++ while (dsi.update_syncers > 0) { ++ complete(&dsi.update_completion); ++ --dsi.update_syncers; ++ } ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ dsi_update_screen_dispc(dsi.update_region.display); ++ } else { ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ } ++} ++ ++static void dsi_start_auto_update(struct omap_display *display) ++{ ++ unsigned long flags; ++ int bytespp = 3; ++ ++ DSSDBG("starting auto update\n"); ++ ++ dsi.update_region.display = display; ++ dsi.update_region.x = 0; ++ dsi.update_region.y = 0; ++ dsi.update_region.w = display->panel->timings.x_res; ++ dsi.update_region.h = display->panel->timings.y_res; ++ dsi.update_region.bytespp = bytespp; ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ dispc_set_lcd_size(display->panel->timings.x_res, ++ display->panel->timings.y_res); ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ dsi.update_ongoing = 1; ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ dsi_update_screen_dispc(display); ++} ++ ++static void dsi_stop_auto_update(void) ++{ ++ DSSDBG("waiting for display to finish.\n"); ++ dsi_wait_for_framedone(1); ++ DSSDBG("done waiting\n"); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++} ++ ++static int dsi_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == dsi.update_mode) ++ return 0; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_stop_auto_update(); ++ else if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) ++ dsi_wait_for_framedone(0); ++ ++ dsi.update_mode = mode; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_start_auto_update(display); ++ ++ return 0; ++} ++ ++/* Display funcs */ ++ ++static int dsi_display_enable(struct omap_display *display) ++{ ++ int r = 0; ++ struct dsi_clock_info cinfo; ++ u32 low, high; ++ ++ DSSDBG("dsi_display_enable\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ r = -EINVAL; ++ goto err0; ++ } ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ r = omap_dispc_register_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ if (r) { ++ DSSERR("can't get FRAMEDONE irq\n"); ++ goto err1; ++ } ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); ++ dispc_enable_fifohandcheck(1); ++ ++ dispc_set_burst_size(OMAP_DSS_GFX, OMAP_DSS_BURST_16x32); ++ dispc_set_burst_size(OMAP_DSS_VIDEO1, OMAP_DSS_BURST_16x32); ++ dispc_set_burst_size(OMAP_DSS_VIDEO2, OMAP_DSS_BURST_16x32); ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_GFX) - (16*32/8); ++ low = 0; ++ dispc_setup_plane_fifo(OMAP_DSS_GFX, low, high); ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) - (16*32/8); ++ low = 0; ++ dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, low, high); ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) - (16*32/8); ++ low = 0; ++ dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, low, high); ++ ++ dispc_set_tft_data_lines(display->ctrl->pixel_size); ++ ++ { ++ struct omap_video_timings timings = { ++ .hsw = 1, ++ .hfp = 1, ++ .hbp = 1, ++ .vsw = 1, ++ .vfp = 0, ++ .vbp = 0, ++ }; ++ ++ dispc_set_lcd_timings(&timings); ++ } ++ ++ _dsi_print_reset_status(); ++ ++ r = dsi_pll_init(1, 0); ++ if (r) ++ goto err2; ++ ++ r = dsi_pll_calc_ddrfreq(display->hw_config.u.dsi.ddr_clk_hz, &cinfo); ++ if (r) ++ goto err3; ++ ++ r = dsi_pll_program(&cinfo); ++ if (r) ++ goto err3; ++ ++ DSSDBG("PLL OK\n"); ++ ++ r = dsi_complexio_init(display); ++ if (r) ++ goto err3; ++ ++ _dsi_print_reset_status(); ++ ++ dsi_proto_timings(); ++ dsi_set_lp_clk_divisor(); ++ ++ if (1) ++ _dsi_print_reset_status(); ++ ++ r = dsi_proto_config(display); ++ if (r) ++ goto err4; ++ ++ /* enable interface */ ++ dsi_vc_enable(0, 1); ++ dsi_vc_enable(1, 1); ++ dsi_if_enable(1); ++ dsi_force_tx_stop_mode_io(); ++ ++ ++ if (display->ctrl && display->ctrl->enable) { ++ r = display->ctrl->enable(display); ++ if (r) ++ goto err5; ++ } ++ ++ if (display->panel && display->panel->enable) { ++ r = display->panel->enable(display); ++ if (r) ++ goto err6; ++ } ++ ++ if (dsi.use_te) { ++ r = display->ctrl->enable_te(display, 1); ++ if (r) ++ goto err7; ++ } ++ ++ /* enable high-speed after initial config */ ++ dsi_vc_enable_hs(0, 1); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ dsi_set_update_mode(display, dsi.user_update_mode); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++err7: ++ if (display->panel && display->panel->disable) ++ display->panel->disable(display); ++err6: ++ if (display->ctrl && display->ctrl->disable) ++ display->ctrl->disable(display); ++err5: ++ dsi_if_enable(0); ++err4: ++ dsi_complexio_uninit(); ++err3: ++ dsi_pll_uninit(); ++err2: ++ omap_dispc_unregister_isr(framedone_callback); ++err1: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++err0: ++ mutex_unlock(&dsi.lock); ++ DSSDBG("dsi_display_enable FAILED\n"); ++ return r; ++} ++ ++static void dsi_display_disable(struct omap_display *display) ++{ ++ DSSDBG("dsi_display_disable\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) ++ goto end; ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++ ++ omap_dispc_unregister_isr(framedone_callback); ++ ++ if (display->panel && display->panel->disable) ++ display->panel->disable(display); ++ if (display->ctrl && display->ctrl->disable) ++ display->ctrl->disable(display); ++ ++ dsi_complexio_uninit(); ++ dsi_pll_uninit(); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++end: ++ mutex_unlock(&dsi.lock); ++} ++ ++static int dsi_display_suspend(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EINVAL; ++ ++ if (display->panel->suspend) ++ display->panel->suspend(display); ++ ++ if (display->ctrl->suspend) ++ display->ctrl->suspend(display); ++ ++ display->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int dsi_display_resume(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ return -EINVAL; ++ ++ if (display->panel->resume) ++ display->panel->resume(display); ++ ++ if (display->ctrl->resume) ++ display->ctrl->resume(display); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static int dsi_display_update(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ unsigned long flags; ++ int r = 0; ++ ++ DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ mutex_lock(&dsi.lock); ++ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) ++ goto end; /* XXX return error? */ ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ ++ if (dsi.update_ongoing) { ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ DSSERR("DSI is busy\n"); ++ r = -EBUSY; ++ goto end; ++ } ++ ++ perf_mark_setup(); ++ ++ dsi.update_ongoing = 1; ++ ++ if (dsi.update_syncers > 0) ++ DSSERR("someone waiting for sync, and no update ongoing\n"); ++ ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ dsi_setup_update_dispc(display, x, y, w, h); ++ dsi_update_screen_dispc(display); ++ } else { ++ r = dsi_update_screen_l4(display, x, y, w, h); ++ if (r) ++ goto end; ++ ++ spin_lock_irqsave(&dsi.update_lock, flags); ++ dsi.update_ongoing = 0; ++ while (dsi.update_syncers > 0) { ++ complete(&dsi.update_completion); ++ --dsi.update_syncers; ++ } ++ spin_unlock_irqrestore(&dsi.update_lock, flags); ++ } ++ ++end: ++ mutex_unlock(&dsi.lock); ++ return r; ++} ++ ++static int dsi_display_sync(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_display_sync\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) ++ goto end; ++ ++ r = dsi_wait_for_framedone(0); ++ ++end: ++ mutex_unlock(&dsi.lock); ++ return r; ++} ++ ++static int dsi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ int r; ++ ++ DSSDBG("dsi_display_set_update_mode\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ r = dsi_set_update_mode(display, mode); ++ dsi.user_update_mode = mode; ++ ++ mutex_unlock(&dsi.lock); ++ ++ return r; ++} ++ ++static enum omap_dss_update_mode dsi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return dsi.user_update_mode; ++} ++ ++static int dsi_display_enable_te(struct omap_display *display, int enable) ++{ ++ DSSDBG("dsi_display_enable_te\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED); ++ ++ dsi.use_te = enable; ++ display->ctrl->enable_te(display, enable); ++ if (enable) { ++ /* disable LP_RX_TO, so that we can receive TE. ++ * Time to wait for TE is longer than the timer allows */ ++ REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ ++ } else { ++ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ ++ } ++ ++ /* restore the old update mode */ ++ dsi_set_update_mode(display, dsi.user_update_mode); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++} ++ ++static int dsi_display_get_te(struct omap_display *display) ++{ ++ return dsi.use_te; ++} ++ ++static int dsi_display_run_test(struct omap_display *display, int test_num) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_display_run_test %d\n", test_num); ++ ++ mutex_lock(&dsi.lock); ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED); ++ ++ /* run test first in low speed mode */ ++ dsi_vc_enable_hs(0, 0); ++ ++ if (display->ctrl->run_test) { ++ r = display->ctrl->run_test(display, test_num); ++ if (r) ++ goto fail; ++ } ++ ++ if (display->panel->run_test) { ++ r = display->panel->run_test(display, test_num); ++ if (r) ++ goto fail; ++ } ++ ++ /* then in high speed */ ++ dsi_vc_enable_hs(0, 1); ++ ++ if (display->ctrl->run_test) { ++ r = display->ctrl->run_test(display, test_num); ++ if (r) ++ goto fail; ++ } ++ ++ if (display->panel->run_test) ++ r = display->panel->run_test(display, test_num); ++ ++fail: ++ dsi_vc_enable_hs(0, 1); ++ ++ /* restore the old update mode */ ++ dsi_set_update_mode(display, dsi.user_update_mode); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ mutex_unlock(&dsi.lock); ++ ++ return r; ++} ++ ++void dsi_init_display(struct omap_display *display) ++{ ++ DSSDBG("DSI init\n"); ++ ++ display->enable = dsi_display_enable; ++ display->disable = dsi_display_disable; ++ display->suspend = dsi_display_suspend; ++ display->resume = dsi_display_resume; ++ display->update = dsi_display_update; ++ display->sync = dsi_display_sync; ++ display->set_update_mode = dsi_display_set_update_mode; ++ display->get_update_mode = dsi_display_get_update_mode; ++ display->enable_te = dsi_display_enable_te; ++ display->get_te = dsi_display_get_te; ++ display->run_test = dsi_display_run_test; ++ ++ display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++} ++ ++int dsi_init(void) ++{ ++ u32 rev; ++ ++ init_completion(&dsi.bta_completion); ++ INIT_DELAYED_WORK(&dsi.framedone_work, framedone_worker); ++ ++ init_completion(&dsi.update_completion); ++ spin_lock_init(&dsi.update_lock); ++ dsi.update_ongoing = 0; ++ dsi.update_syncers = 0; ++ ++ mutex_init(&dsi.lock); ++ ++ dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); ++ if (!dsi.base) { ++ DSSERR("can't ioremap DSI\n"); ++ return -ENOMEM; ++ } ++ ++ enable_clocks(1); ++ ++ /* Autoidle */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); ++ ++ /* ENWAKEUP */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); ++ ++ /* SIDLEMODE smart-idle */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); ++ ++ _dsi_initialize_irq(); ++ ++ rev = dsi_read_reg(DSI_REVISION); ++ printk(KERN_INFO "OMAP DSI rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++void dsi_exit(void) ++{ ++ iounmap(dsi.base); ++ ++ DSSDBG("omap_dsi_exit\n"); ++} ++ +diff --git a/arch/arm/plat-omap/dss/dss.c b/arch/arm/plat-omap/dss/dss.c +new file mode 100644 +index 0000000..4a403c1 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dss.c +@@ -0,0 +1,774 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dss.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "DSS" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "dss.h" ++ ++#define DSS_BASE 0x48050000 ++ ++#define DSS_SZ_REGS SZ_512 ++ ++struct dss_reg { ++ u16 idx; ++}; ++ ++#define DSS_REG(idx) ((const struct dss_reg) { idx }) ++ ++#define DSS_REVISION DSS_REG(0x0000) ++#define DSS_SYSCONFIG DSS_REG(0x0010) ++#define DSS_SYSSTATUS DSS_REG(0x0014) ++#define DSS_IRQSTATUS DSS_REG(0x0018) ++#define DSS_CONTROL DSS_REG(0x0040) ++#define DSS_SDI_CONTROL DSS_REG(0x0044) ++#define DSS_PLL_CONTROL DSS_REG(0x0048) ++#define DSS_SDI_STATUS DSS_REG(0x005C) ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dss_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) ++ ++static struct { ++ void __iomem *base; ++ ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ struct clk *dss2_fck; ++ struct clk *dss_54m_fck; ++ struct clk *dss_96m_fck; ++ ++ unsigned num_clks_enabled; ++ struct platform_device *pdev; ++ unsigned ctx_id; ++ u32 ctx[DSS_SZ_REGS / sizeof(u32)]; ++} dss; ++ ++static void dss_clk_enable_all_no_ctx(void); ++static void dss_clk_disable_all_no_ctx(void); ++static void dss_clk_enable_no_ctx(enum dss_clock clks); ++static void dss_clk_disable_no_ctx(enum dss_clock clks); ++static int _omap_dss_wait_reset(void); ++ ++static char *def_disp_name; ++module_param_named(def_disp, def_disp_name, charp, 0); ++MODULE_PARM_DESC(def_disp_name, "default display name"); ++ ++#ifdef DEBUG ++unsigned int dss_debug; ++module_param_named(debug, dss_debug, bool, 0644); ++#endif ++ ++static inline void dss_write_reg(const struct dss_reg idx, u32 val) ++{ ++ __raw_writel(val, dss.base + idx.idx); ++} ++ ++static inline u32 dss_read_reg(const struct dss_reg idx) ++{ ++ return __raw_readl(dss.base + idx.idx); ++} ++ ++#define SR(reg) \ ++ dss.ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(DSS_##reg) ++#define RR(reg) \ ++ dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)]) ++ ++static void dss_save_context(void) ++{ ++ if (cpu_is_omap24xx()) ++ return; ++ ++ SR(SYSCONFIG); ++ SR(CONTROL); ++ SR(SDI_CONTROL); ++ SR(PLL_CONTROL); ++} ++ ++static void dss_restore_context(void) ++{ ++ RR(SYSCONFIG); ++ RR(CONTROL); ++ RR(SDI_CONTROL); ++ RR(PLL_CONTROL); ++} ++ ++#undef SR ++#undef RR ++ ++static unsigned dss_get_ctx_id(void) ++{ ++ struct omap_dss_platform_data *pdata = dss.pdev->dev.platform_data; ++ ++ if (!pdata->get_last_off_on_transaction_id) ++ return 0; ++ ++ return pdata->get_last_off_on_transaction_id(&dss.pdev->dev); ++} ++ ++static void save_all_ctx(void) ++{ ++ DSSDBG("save context\n"); ++ ++ dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dss_save_context(); ++ dispc_save_context(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_save_context(); ++#endif ++ ++ dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++static void restore_all_ctx(void) ++{ ++ DSSDBG("restore context\n"); ++ ++ dss_clk_enable_all_no_ctx(); ++ ++ if (_omap_dss_wait_reset()) ++ DSSERR("DSS not coming out of reset after sleep\n"); ++ ++ dss_restore_context(); ++ dispc_restore_context(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_restore_context(); ++#endif ++ ++ dss_clk_disable_all_no_ctx(); ++} ++ ++void dss_sdi_init(int datapairs) ++{ ++ u32 l; ++ ++ BUG_ON(datapairs > 3 || datapairs < 1); ++ ++ l = dss_read_reg(DSS_SDI_CONTROL); ++ l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */ ++ l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */ ++ l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */ ++ dss_write_reg(DSS_SDI_CONTROL, l); ++ ++ l = dss_read_reg(DSS_PLL_CONTROL); ++ l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */ ++ l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */ ++ l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */ ++ dss_write_reg(DSS_PLL_CONTROL, l); ++ ++ /* Reset SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */ ++ udelay(1); /* wait 2x PCLK */ ++ ++ /* Lock SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */ ++ ++ /* Waiting for PLL lock request to complete */ ++ while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6)) ++ ; ++ ++ /* Clearing PLL_GO bit */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28); ++ ++ /* Waiting for PLL to lock */ ++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) ++ ; ++ ++ dispc_lcd_enable_signal(1); ++ ++ /* Waiting for SDI reset to complete */ ++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) ++ ; ++} ++ ++ssize_t dss_print_clocks(char *buf, ssize_t size) ++{ ++ ssize_t l = 0; ++ int i; ++ struct clk *clocks[5] = { ++ dss.dss_ick, ++ dss.dss1_fck, ++ dss.dss2_fck, ++ dss.dss_54m_fck, ++ dss.dss_96m_fck ++ }; ++ ++ l += snprintf(buf + l, size - l, "- dss -\n"); ++ ++ l += snprintf(buf + l, size - l, "internal clk count\t%u\n", ++ dss.num_clks_enabled); ++ ++ for (i = 0; i < 5; i++) { ++ if (!clocks[i]) ++ continue; ++ l += snprintf(buf + l, size - l, "%-15s\t%lu\t%d\n", ++ clocks[i]->name, ++ clk_get_rate(clocks[i]), ++ clk_get_usecount(clocks[i])); ++ } ++ ++ return l; ++} ++ ++static int get_dss_clocks(void) ++{ ++ const struct { ++ struct clk **clock; ++ char *omap2_name; ++ char *omap3_name; ++ } clocks[5] = { ++ { &dss.dss_ick, "dss_ick", "dss_ick" }, /* L3 & L4 ick */ ++ { &dss.dss1_fck, "dss1_fck", "dss1_alwon_fck" }, ++ { &dss.dss2_fck, "dss2_fck", "dss2_alwon_fck" }, ++ { &dss.dss_54m_fck, "dss_54m_fck", "dss_tv_fck" }, ++ { &dss.dss_96m_fck, NULL, "dss_96m_fck" }, ++ }; ++ ++ int r = 0; ++ int i; ++ const int num_clocks = 5; ++ ++ for (i = 0; i < num_clocks; i++) ++ *clocks[i].clock = NULL; ++ ++ for (i = 0; i < num_clocks; i++) { ++ struct clk *clk; ++ const char *clk_name; ++ ++ clk_name = cpu_is_omap34xx() ? clocks[i].omap3_name ++ : clocks[i].omap2_name; ++ ++ if (!clk_name) ++ continue; ++ ++ clk = clk_get(NULL, clk_name); ++ ++ if (IS_ERR(clk)) { ++ DSSERR("can't get clock %s", clk_name); ++ r = PTR_ERR(clk); ++ goto err; ++ } ++ ++ DSSDBG("clk %s, rate %ld\n", ++ clk_name, clk_get_rate(clk)); ++ ++ *clocks[i].clock = clk; ++ } ++ ++ return 0; ++ ++err: ++ for (i = 0; i < num_clocks; i++) { ++ if (!IS_ERR(*clocks[i].clock)) ++ clk_put(*clocks[i].clock); ++ } ++ ++ return r; ++} ++ ++static void put_dss_clocks(void) ++{ ++ if (dss.dss_96m_fck) ++ clk_put(dss.dss_96m_fck); ++ clk_put(dss.dss_54m_fck); ++ clk_put(dss.dss1_fck); ++ clk_put(dss.dss2_fck); ++ clk_put(dss.dss_ick); ++} ++ ++unsigned long dss_clk_get_rate(enum dss_clock clk) ++{ ++ switch (clk) { ++ case DSS_CLK_ICK: ++ return clk_get_rate(dss.dss_ick); ++ case DSS_CLK_FCK1: ++ return clk_get_rate(dss.dss1_fck); ++ case DSS_CLK_FCK2: ++ return clk_get_rate(dss.dss2_fck); ++ case DSS_CLK_54M: ++ return clk_get_rate(dss.dss_54m_fck); ++ case DSS_CLK_96M: ++ return clk_get_rate(dss.dss_96m_fck); ++ } ++ ++ BUG(); ++ return 0; ++} ++ ++static unsigned count_clk_bits(enum dss_clock clks) ++{ ++ unsigned num_clks = 0; ++ ++ if (clks & DSS_CLK_ICK) ++ ++num_clks; ++ if (clks & DSS_CLK_FCK1) ++ ++num_clks; ++ if (clks & DSS_CLK_FCK2) ++ ++num_clks; ++ if (clks & DSS_CLK_54M) ++ ++num_clks; ++ if (clks & DSS_CLK_96M) ++ ++num_clks; ++ ++ return num_clks; ++} ++ ++static void dss_clk_enable_no_ctx(enum dss_clock clks) ++{ ++ unsigned num_clks = count_clk_bits(clks); ++ ++ if (clks & DSS_CLK_ICK) ++ clk_enable(dss.dss_ick); ++ if (clks & DSS_CLK_FCK1) ++ clk_enable(dss.dss1_fck); ++ if (clks & DSS_CLK_FCK2) ++ clk_enable(dss.dss2_fck); ++ if (clks & DSS_CLK_54M) ++ clk_enable(dss.dss_54m_fck); ++ if (clks & DSS_CLK_96M) ++ clk_enable(dss.dss_96m_fck); ++ ++ dss.num_clks_enabled += num_clks; ++} ++ ++void dss_clk_enable(enum dss_clock clks) ++{ ++ dss_clk_enable_no_ctx(clks); ++ ++ if (cpu_is_omap34xx()) { ++ int id = dss_get_ctx_id(); ++ ++ if (id != dss.ctx_id) { ++ DSSDBG("ctx id %u -> id %u\n", ++ dss.ctx_id, id); ++ restore_all_ctx(); ++ dss.ctx_id = id; ++ } ++ } ++} ++ ++static void dss_clk_disable_no_ctx(enum dss_clock clks) ++{ ++ unsigned num_clks = count_clk_bits(clks); ++ ++ if (clks & DSS_CLK_ICK) ++ clk_disable(dss.dss_ick); ++ if (clks & DSS_CLK_FCK1) ++ clk_disable(dss.dss1_fck); ++ if (clks & DSS_CLK_FCK2) ++ clk_disable(dss.dss2_fck); ++ if (clks & DSS_CLK_54M) ++ clk_disable(dss.dss_54m_fck); ++ if (clks & DSS_CLK_96M) ++ clk_disable(dss.dss_96m_fck); ++ ++ dss.num_clks_enabled -= num_clks; ++} ++ ++void dss_clk_disable(enum dss_clock clks) ++{ ++ if (cpu_is_omap34xx()) { ++ unsigned num_clks = count_clk_bits(clks); ++ ++ BUG_ON(dss.num_clks_enabled < num_clks); ++ ++ if (dss.num_clks_enabled == num_clks) ++ save_all_ctx(); ++ } ++ ++ dss_clk_disable_no_ctx(clks); ++} ++ ++static void dss_clk_enable_all_no_ctx(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_enable_no_ctx(clks); ++} ++ ++static void dss_clk_disable_all_no_ctx(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_disable_no_ctx(clks); ++} ++ ++static void dss_clk_disable_all(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_disable(clks); ++} ++ ++void dss_select_clk_source(int dsi, int dispc) ++{ ++ u32 r; ++ r = dss_read_reg(DSS_CONTROL); ++ r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */ ++ r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */ ++ dss_write_reg(DSS_CONTROL, r); ++} ++ ++int dss_get_dsi_clk_source(void) ++{ ++ return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1); ++} ++ ++int dss_get_dispc_clk_source(void) ++{ ++ return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0); ++} ++ ++static irqreturn_t dss_irq_handler_omap2(int irq, void *arg) ++{ ++ dispc_irq_handler(); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t dss_irq_handler_omap3(int irq, void *arg) ++{ ++ u32 irqstatus; ++ ++ irqstatus = dss_read_reg(DSS_IRQSTATUS); ++ ++ if (irqstatus & (1<<0)) /* DISPC_IRQ */ ++ dispc_irq_handler(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ if (irqstatus & (1<<1)) /* DSI_IRQ */ ++ dsi_irq_handler(); ++#endif ++ ++ return IRQ_HANDLED; ++} ++ ++static int _omap_dss_wait_reset(void) ++{ ++ unsigned timeout = 1000; ++ ++ while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) { ++ udelay(1); ++ if (!--timeout) { ++ DSSERR("soft reset failed\n"); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static int _omap_dss_reset(void) ++{ ++ /* Soft reset */ ++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1); ++ return _omap_dss_wait_reset(); ++} ++ ++void dss_set_venc_output(enum omap_dss_venc_type type) ++{ ++ int l = 0; ++ ++ if (type == OMAP_DSS_VENC_TYPE_COMPOSITE) ++ l = 0; ++ else if (type == OMAP_DSS_VENC_TYPE_SVIDEO) ++ l = 1; ++ else ++ BUG(); ++ ++ /* venc out selection. 0 = comp, 1 = svideo */ ++ REG_FLD_MOD(DSS_CONTROL, l, 6, 6); ++} ++ ++void dss_set_dac_pwrdn_bgz(int enable) ++{ ++ REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ ++} ++ ++int dss_init(void) ++{ ++ int r; ++ u32 rev; ++ ++ dss.base = ioremap(DSS_BASE, DSS_SZ_REGS); ++ if (!dss.base) { ++ DSSERR("can't ioremap DSS\n"); ++ r = -ENOMEM; ++ goto fail0; ++ } ++ ++ /* We need to wait here a bit, otherwise we sometimes start to get ++ * synclost errors. I believe we could wait for one framedone or ++ * perhaps vsync interrupt, but, because dispc is not initialized yet, ++ * we don't have access to the irq register. ++ */ ++ msleep(400); ++ ++ _omap_dss_reset(); ++ ++ /* autoidle */ ++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0); ++ ++ /* Select DPLL */ ++ REG_FLD_MOD(DSS_CONTROL, 0, 0, 0); ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */ ++ REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */ ++ REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */ ++#endif ++ ++ r = request_irq(INT_24XX_DSS_IRQ, ++ cpu_is_omap24xx() ++ ? dss_irq_handler_omap2 ++ : dss_irq_handler_omap3, ++ 0, "OMAP DSS", NULL); ++ ++ if (r < 0) { ++ DSSERR("omap2 dss: request_irq failed\n"); ++ goto fail1; ++ } ++ ++ dss_save_context(); ++ ++ rev = dss_read_reg(DSS_REVISION); ++ printk(KERN_INFO "OMAP DSS rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ return 0; ++ ++fail1: ++ iounmap(dss.base); ++fail0: ++ return r; ++} ++ ++void dss_exit(void) ++{ ++ int c; ++ ++ free_irq(INT_24XX_DSS_IRQ, NULL); ++ ++ /* these should be removed at some point */ ++ c = clk_get_usecount(dss.dss_ick); ++ if (c > 0) { ++ DSSERR("warning: dss_ick usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(dss.dss_ick); ++ } ++ ++ c = clk_get_usecount(dss.dss1_fck); ++ if (c > 0) { ++ DSSERR("warning: dss1_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(dss.dss1_fck); ++ } ++ ++ c = clk_get_usecount(dss.dss2_fck); ++ if (c > 0) { ++ DSSERR("warning: dss2_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(dss.dss2_fck); ++ } ++ ++ c = clk_get_usecount(dss.dss_54m_fck); ++ if (c > 0) { ++ DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(dss.dss_54m_fck); ++ } ++ ++ if (dss.dss_96m_fck) { ++ c = clk_get_usecount(dss.dss_96m_fck); ++ if (c > 0) { ++ DSSERR("warning: dss_96m_fck usecount %d, disabling\n", ++ c); ++ while (c-- > 0) ++ clk_disable(dss.dss_96m_fck); ++ } ++ } ++ ++ put_dss_clocks(); ++ ++ iounmap(dss.base); ++} ++ ++ ++ ++static int omap_dss_probe(struct platform_device *pdev) ++{ ++ struct omap_dss_platform_data *pdata = pdev->dev.platform_data; ++ ++ int r; ++ ++ dss.pdev = pdev; ++ ++ r = get_dss_clocks(); ++ if (r) ++ goto fail0; ++ ++ dss_clk_enable_all_no_ctx(); ++ ++ dss.ctx_id = dss_get_ctx_id(); ++ DSSDBG("initial ctx id %u\n", dss.ctx_id); ++ ++ r = dss_init(); ++ if (r) { ++ DSSERR("Failed to initialize DSS\n"); ++ goto fail0; ++ } ++ ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ r = rfbi_init(); ++ if (r) { ++ DSSERR("Failed to initialize rfbi\n"); ++ goto fail0; ++ } ++#endif ++ ++ r = dpi_init(); ++ if (r) { ++ DSSERR("Failed to initialize dpi\n"); ++ goto fail0; ++ } ++ ++ r = dispc_init(); ++ if (r) { ++ DSSERR("Failed to initialize dispc\n"); ++ goto fail0; ++ } ++#ifdef CONFIG_OMAP2_DSS_VENC ++ r = venc_init(); ++ if (r) { ++ DSSERR("Failed to initialize venc\n"); ++ goto fail0; ++ } ++#endif ++ if (cpu_is_omap34xx()) { ++#ifdef CONFIG_OMAP2_DSS_SDI ++ r = sdi_init(); ++ if (r) { ++ DSSERR("Failed to initialize SDI\n"); ++ goto fail0; ++ } ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ r = dsi_init(); ++ if (r) { ++ DSSERR("Failed to initialize DSI\n"); ++ goto fail0; ++ } ++#endif ++ } ++ ++ initialize_displays(pdata); ++ ++ r = initialize_sysfs(&pdev->dev); ++ if (r) ++ goto fail0; ++ ++ initialize_overlays(def_disp_name); ++ ++ dss_clk_disable_all(); ++ ++ return 0; ++ ++ /* XXX fail correctly */ ++fail0: ++ return r; ++} ++ ++static int omap_dss_remove(struct platform_device *pdev) ++{ ++ uninitialize_sysfs(&pdev->dev); ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ venc_exit(); ++#endif ++ dispc_exit(); ++ dpi_exit(); ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ rfbi_exit(); ++#endif ++ if (cpu_is_omap34xx()) { ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_exit(); ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ sdi_exit(); ++#endif ++ } ++ ++ dss_exit(); ++ ++ return 0; ++} ++ ++ ++static struct platform_driver omap_dss_driver = { ++ .probe = omap_dss_probe, ++ .remove = omap_dss_remove, ++ .driver = { ++ .name = "omap-dss", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init omap_dss_init(void) ++{ ++ return platform_driver_register(&omap_dss_driver); ++} ++ ++static void __exit omap_dss_exit(void) ++{ ++ platform_driver_unregister(&omap_dss_driver); ++} ++ ++subsys_initcall(omap_dss_init); ++module_exit(omap_dss_exit); ++ ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("OMAP2/3 Display Subsystem"); ++MODULE_LICENSE("GPL v2"); ++ +diff --git a/arch/arm/plat-omap/dss/dss.h b/arch/arm/plat-omap/dss/dss.h +new file mode 100644 +index 0000000..da628a7 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/dss.h +@@ -0,0 +1,274 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/dss.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#ifndef __OMAP2_DSS_H ++#define __OMAP2_DSS_H ++ ++#ifdef CONFIG_OMAP2_DSS_DEBUG_SUPPORT ++#define DEBUG ++#endif ++ ++#ifdef DEBUG ++extern unsigned int dss_debug; ++#ifdef DSS_SUBSYS_NAME ++#define DSSDBG(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omap-dss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSDBG(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omap-dss: " format, ## __VA_ARGS__) ++#endif ++#else ++#define DSSDBG(format, ...) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSERR(format, ...) \ ++ printk(KERN_ERR "omap-dss " DSS_SUBSYS_NAME " error: " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSERR(format, ...) \ ++ printk(KERN_ERR "omap-dss error: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSINFO(format, ...) \ ++ printk(KERN_INFO "omap-dss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSINFO(format, ...) \ ++ printk(KERN_INFO "omap-dss: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSWARN(format, ...) \ ++ printk(KERN_WARNING "omap-dss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSWARN(format, ...) \ ++ printk(KERN_WARNING "omap-dss: " format, ## __VA_ARGS__) ++#endif ++ ++/* OMAP TRM gives bitfields as start:end, where start is the higher bit ++ number. For example 7:0 */ ++#define FLD_MASK(start, end) (((1 << (start - end + 1)) - 1) << (end)) ++#define FLD_VAL(val, start, end) (((val) << end) & FLD_MASK(start, end)) ++#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end)) ++#define FLD_MOD(orig, val, start, end) \ ++ (((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end)) ++ ++#define DISPC_MAX_FCK 173000000 ++ ++enum omap_burst_size { ++ OMAP_DSS_BURST_4x32 = 0, ++ OMAP_DSS_BURST_8x32 = 1, ++ OMAP_DSS_BURST_16x32 = 2, ++}; ++ ++enum omap_parallel_interface_mode { ++ OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */ ++ OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */ ++ OMAP_DSS_PARALLELMODE_DSI, ++}; ++ ++enum dss_clock { ++ DSS_CLK_ICK = 1 << 0, ++ DSS_CLK_FCK1 = 1 << 1, ++ DSS_CLK_FCK2 = 1 << 2, ++ DSS_CLK_54M = 1 << 3, ++ DSS_CLK_96M = 1 << 4, ++}; ++ ++struct dispc_clock_info { ++ /* rates that we get with dividers below */ ++ unsigned long fck; ++ unsigned long lck; ++ unsigned long pck; ++ ++ /* dividers */ ++ int fck_div; ++ int lck_div; ++ int pck_div; ++}; ++ ++struct dsi_clock_info { ++ /* rates that we get with dividers below */ ++ unsigned long fint; ++ unsigned long dsiphy; ++ unsigned long clkin; /* input clk for DSI PLL */ ++ unsigned long dispc_fck; /* output clk, DSI1_PLL_FCLK */ ++ unsigned long dsi_fck; /* output clk, DSI2_PLL_FCLK */ ++ unsigned long lck; ++ unsigned long pck; ++ ++ /* dividers */ ++ int regn; ++ int regm; ++ int regm3; ++ int regm4; ++ ++ int lck_div; ++ int pck_div; ++ ++ int highfreq; ++ int use_dss2_fck; ++}; ++ ++int initialize_sysfs(struct device *dev); ++void uninitialize_sysfs(struct device *dev); ++void initialize_displays(struct omap_dss_platform_data *pdata); ++void initialize_overlays(const char *def_disp_name); ++ ++/* DSS */ ++int dss_init(void); ++void dss_exit(void); ++ ++void dss_clk_enable(enum dss_clock clks); ++void dss_clk_disable(enum dss_clock clks); ++ ++void dss_sdi_init(int datapairs); ++void dss_select_clk_source(int dsi, int dispc); ++int dss_get_dsi_clk_source(void); ++int dss_get_dispc_clk_source(void); ++void dss_set_venc_output(enum omap_dss_venc_type type); ++void dss_set_dac_pwrdn_bgz(int enable); ++unsigned long dss_clk_get_rate(enum dss_clock clk); ++ssize_t dss_print_clocks(char *buf, ssize_t size); ++ ++/* SDI */ ++int sdi_init(void); ++void sdi_exit(void); ++void sdi_init_display(struct omap_display *display); ++ ++ ++/* DSI */ ++int dsi_init(void); ++void dsi_exit(void); ++ ++void dsi_save_context(void); ++void dsi_restore_context(void); ++ ++void dsi_init_display(struct omap_display *display); ++void dsi_irq_handler(void); ++unsigned long dsi_get_dsi1_pll_rate(void); ++unsigned long dsi_get_dsi2_pll_rate(void); ++int dsi_pll_calc_pck(int is_tft, unsigned long req_pck, ++ struct dsi_clock_info *cinfo); ++int dsi_pll_program(struct dsi_clock_info *cinfo); ++int dsi_pll_init(int enable_hsclk, int enable_hsdiv); ++void dsi_pll_uninit(void); ++ssize_t dsi_print_clocks(char *buf, ssize_t size); ++ ++/* DPI */ ++int dpi_init(void); ++void dpi_exit(void); ++void dpi_init_display(struct omap_display *display); ++ ++/* DISPC */ ++int dispc_init(void); ++void dispc_exit(void); ++void dispc_irq_handler(void); ++void dispc_fake_vsync_irq(void); ++ ++void dispc_save_context(void); ++void dispc_restore_context(void); ++ ++void dispc_lcd_enable_signal_polarity(int act_high); ++void dispc_lcd_enable_signal(int enable); ++void dispc_pck_free_enable(int enable); ++void dispc_enable_fifohandcheck(int enable); ++ ++void dispc_set_lcd_size(int width, int height); ++void dispc_set_digit_size(int width, int height); ++u32 dispc_get_plane_fifo_size(enum omap_plane plane); ++void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high); ++void dispc_set_burst_size(enum omap_plane plane, ++ enum omap_burst_size burst_size); ++ ++void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr); ++void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr); ++void dispc_set_plane_pos(enum omap_plane plane, int x, int y); ++void dispc_set_plane_size(enum omap_plane plane, int width, int height); ++void dispc_set_row_inc(enum omap_plane plane, int inc); ++ ++int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, ++ u32 paddr, int screen_width, ++ int pos_x, int pos_y, ++ int width, int height, ++ int out_width, int out_height, ++ enum omap_color_mode color_mode, ++ int ilace); ++ ++void dispc_go(enum omap_channel channel); ++void dispc_enable_lcd_out(int enable); ++void dispc_enable_digit_out(int enable); ++int dispc_enable_plane(enum omap_plane plane, int enable); ++ ++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode); ++void dispc_set_tft_data_lines(int data_lines); ++void dispc_set_lcd_display_type(enum omap_lcd_display_type type); ++void dispc_set_loadmode(enum omap_dss_load_mode mode); ++ ++void dispc_set_default_color(enum omap_channel channel, u32 color); ++void dispc_set_trans_key(enum omap_channel ch, ++ enum omap_dss_color_key_type type, ++ u32 trans_key); ++void dispc_enable_trans_key(enum omap_channel ch, int enable); ++ ++void dispc_set_lcd_timings(struct omap_video_timings *timings); ++unsigned long dispc_fclk_rate(void); ++unsigned long dispc_pclk_rate(void); ++void dispc_set_pol_freq(struct omap_panel *panel); ++void find_lck_pck_divs(int is_tft, unsigned long req_pck, unsigned long fck, ++ int *lck_div, int *pck_div); ++int dispc_calc_clock_div(int is_tft, unsigned long req_pck, ++ struct dispc_clock_info *cinfo); ++int dispc_set_clock_div(struct dispc_clock_info *cinfo); ++void dispc_set_lcd_divisor(int lck_div, int pck_div); ++ ++void dispc_setup_partial_planes(struct omap_display *display, ++ int *x, int *y, int *w, int *h); ++void dispc_draw_partial_planes(struct omap_display *display); ++ ++ ++ssize_t dispc_print_clocks(char *buf, ssize_t size); ++ ++/* VENC */ ++int venc_init(void); ++void venc_exit(void); ++void venc_init_display(struct omap_display *display); ++ ++/* RFBI */ ++int rfbi_init(void); ++void rfbi_exit(void); ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines); ++void rfbi_enable_rfbi(int enable); ++void rfbi_transfer_area(int width, int height, ++ void (callback)(void *data), void *data); ++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); ++unsigned long rfbi_get_max_tx_rate(void); ++void rfbi_init_display(struct omap_display *display); ++ ++#endif +diff --git a/arch/arm/plat-omap/dss/rfbi.c b/arch/arm/plat-omap/dss/rfbi.c +new file mode 100644 +index 0000000..b4b65e6 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/rfbi.c +@@ -0,0 +1,1262 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/rfbi.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "RFBI" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "dss.h" ++ ++/*#define MEASURE_PERF*/ ++ ++#define RFBI_BASE 0x48050800 ++ ++struct rfbi_reg { u16 idx; }; ++ ++#define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) ++ ++#define RFBI_REVISION RFBI_REG(0x0000) ++#define RFBI_SYSCONFIG RFBI_REG(0x0010) ++#define RFBI_SYSSTATUS RFBI_REG(0x0014) ++#define RFBI_CONTROL RFBI_REG(0x0040) ++#define RFBI_PIXEL_CNT RFBI_REG(0x0044) ++#define RFBI_LINE_NUMBER RFBI_REG(0x0048) ++#define RFBI_CMD RFBI_REG(0x004c) ++#define RFBI_PARAM RFBI_REG(0x0050) ++#define RFBI_DATA RFBI_REG(0x0054) ++#define RFBI_READ RFBI_REG(0x0058) ++#define RFBI_STATUS RFBI_REG(0x005c) ++ ++#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) ++#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) ++#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) ++#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) ++#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) ++#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) ++ ++#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) ++#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) ++ ++#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param)) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) ++ ++/* To work around an RFBI transfer rate limitation */ ++#define OMAP_RFBI_RATE_LIMIT 1 ++ ++enum omap_rfbi_cycleformat { ++ OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, ++ OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, ++ OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, ++ OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, ++}; ++ ++enum omap_rfbi_datatype { ++ OMAP_DSS_RFBI_DATATYPE_12 = 0, ++ OMAP_DSS_RFBI_DATATYPE_16 = 1, ++ OMAP_DSS_RFBI_DATATYPE_18 = 2, ++ OMAP_DSS_RFBI_DATATYPE_24 = 3, ++}; ++ ++enum omap_rfbi_parallelmode { ++ OMAP_DSS_RFBI_PARALLELMODE_8 = 0, ++ OMAP_DSS_RFBI_PARALLELMODE_9 = 1, ++ OMAP_DSS_RFBI_PARALLELMODE_12 = 2, ++ OMAP_DSS_RFBI_PARALLELMODE_16 = 3, ++}; ++ ++enum update_cmd { ++ RFBI_CMD_UPDATE = 0, ++ RFBI_CMD_SYNC = 1, ++}; ++ ++static int rfbi_convert_timings(struct rfbi_timings *t); ++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); ++static void process_cmd_fifo(void); ++ ++static struct { ++ void __iomem *base; ++ ++ unsigned long l4_khz; ++ ++ enum omap_rfbi_datatype datatype; ++ enum omap_rfbi_parallelmode parallelmode; ++ ++ enum omap_rfbi_te_mode te_mode; ++ int te_enabled; ++ ++ void (*framedone_callback)(void *data); ++ void *framedone_callback_data; ++ ++ struct omap_display *display[2]; ++ ++ struct kfifo *cmd_fifo; ++ spinlock_t cmd_lock; ++ struct completion cmd_done; ++ atomic_t cmd_fifo_full; ++ atomic_t cmd_pending; ++#ifdef MEASURE_PERF ++ unsigned perf_bytes; ++ ktime_t perf_setup_time; ++ ktime_t perf_start_time; ++#endif ++} rfbi; ++ ++struct update_region { ++ u16 x; ++ u16 y; ++ u16 w; ++ u16 h; ++}; ++ ++struct update_param { ++ u8 rfbi_module; ++ u8 cmd; ++ ++ union { ++ struct update_region r; ++ struct completion *sync; ++ } par; ++}; ++ ++static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) ++{ ++ __raw_writel(val, rfbi.base + idx.idx); ++} ++ ++static inline u32 rfbi_read_reg(const struct rfbi_reg idx) ++{ ++ return __raw_readl(rfbi.base + idx.idx); ++} ++ ++static void rfbi_enable_clocks(int enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++void omap_rfbi_write_command(const void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ const u8 *b = buf; ++ for (; len; len--) ++ rfbi_write_reg(RFBI_CMD, *b++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ const u16 *w = buf; ++ BUG_ON(len & 1); ++ for (; len; len -= 2) ++ rfbi_write_reg(RFBI_CMD, *w++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_command); ++ ++void omap_rfbi_read_data(void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ u8 *b = buf; ++ for (; len; len--) { ++ rfbi_write_reg(RFBI_READ, 0); ++ *b++ = rfbi_read_reg(RFBI_READ); ++ } ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ u16 *w = buf; ++ BUG_ON(len & ~1); ++ for (; len; len -= 2) { ++ rfbi_write_reg(RFBI_READ, 0); ++ *w++ = rfbi_read_reg(RFBI_READ); ++ } ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_read_data); ++ ++void omap_rfbi_write_data(const void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ const u8 *b = buf; ++ for (; len; len--) ++ rfbi_write_reg(RFBI_PARAM, *b++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ const u16 *w = buf; ++ BUG_ON(len & 1); ++ for (; len; len -= 2) ++ rfbi_write_reg(RFBI_PARAM, *w++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_data); ++ ++void omap_rfbi_write_pixels(const void *buf, int scr_width, int x, int y, ++ int w, int h) ++{ ++ int start_offset = scr_width * y + x; ++ int horiz_offset = scr_width - w; ++ int i; ++ ++ rfbi_enable_clocks(1); ++ ++ if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { ++ const u16 *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ const u8 *b = (const u8 *)pd; ++ rfbi_write_reg(RFBI_PARAM, *(b+1)); ++ rfbi_write_reg(RFBI_PARAM, *(b+0)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { ++ const u32 *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ const u8 *b = (const u8 *)pd; ++ rfbi_write_reg(RFBI_PARAM, *(b+2)); ++ rfbi_write_reg(RFBI_PARAM, *(b+1)); ++ rfbi_write_reg(RFBI_PARAM, *(b+0)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { ++ const u16 *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ rfbi_write_reg(RFBI_PARAM, *pd); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else { ++ BUG(); ++ } ++ ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_pixels); ++ ++#ifdef MEASURE_PERF ++static void perf_mark_setup(void) ++{ ++ rfbi.perf_setup_time = ktime_get(); ++} ++ ++static void perf_mark_start(void) ++{ ++ rfbi.perf_start_time = ktime_get(); ++} ++ ++static void perf_show(const char *name) ++{ ++ ktime_t t, setup_time, trans_time; ++ u32 total_bytes; ++ u32 setup_us, trans_us, total_us; ++ ++ t = ktime_get(); ++ ++ setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time); ++ setup_us = (u32)ktime_to_us(setup_time); ++ if (setup_us == 0) ++ setup_us = 1; ++ ++ trans_time = ktime_sub(t, rfbi.perf_start_time); ++ trans_us = (u32)ktime_to_us(trans_time); ++ if (trans_us == 0) ++ trans_us = 1; ++ ++ total_us = setup_us + trans_us; ++ ++ total_bytes = rfbi.perf_bytes; ++ ++ DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, " ++ "%u kbytes/sec\n", ++ name, ++ setup_us, ++ trans_us, ++ total_us, ++ 1000*1000 / total_us, ++ total_bytes, ++ total_bytes * 1000 / total_us); ++} ++#else ++#define perf_mark_setup() ++#define perf_mark_start() ++#define perf_show(x) ++#endif ++ ++void rfbi_transfer_area(int width, int height, ++ void (callback)(void *data), void *data) ++{ ++ u32 l; ++ ++ /*BUG_ON(callback == 0);*/ ++ BUG_ON(rfbi.framedone_callback != NULL); ++ ++ DSSDBG("rfbi_transfer_area %dx%d\n", width, height); ++ ++ dispc_set_lcd_size(width, height); ++ ++ dispc_enable_lcd_out(1); ++ ++ rfbi.framedone_callback = callback; ++ rfbi.framedone_callback_data = data; ++ ++ rfbi_enable_clocks(1); ++ ++ rfbi_write_reg(RFBI_PIXEL_CNT, width * height); ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ l = FLD_MOD(l, 1, 0, 0); /* enable */ ++ if (!rfbi.te_enabled) ++ l = FLD_MOD(l, 1, 4, 4); /* ITE */ ++ ++ perf_mark_start(); ++ ++ rfbi_write_reg(RFBI_CONTROL, l); ++} ++ ++static void framedone_callback(void *data, u32 mask) ++{ ++ void (*callback)(void *data); ++ ++ DSSDBG("FRAMEDONE\n"); ++ ++ perf_show("DISPC"); ++ ++ REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); ++ ++ rfbi_enable_clocks(0); ++ ++ callback = rfbi.framedone_callback; ++ rfbi.framedone_callback = NULL; ++ ++ /*callback(rfbi.framedone_callback_data);*/ ++ ++ atomic_set(&rfbi.cmd_pending, 0); ++ ++ process_cmd_fifo(); ++} ++ ++#if 1 /* VERBOSE */ ++static void rfbi_print_timings(void) ++{ ++ u32 l; ++ u32 time; ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ time = 1000000000 / rfbi.l4_khz; ++ if (l & (1 << 4)) ++ time *= 2; ++ ++ DSSDBG("Tick time %u ps\n", time); ++ l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); ++ DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " ++ "REONTIME %d, REOFFTIME %d\n", ++ l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, ++ (l >> 20) & 0x0f, (l >> 24) & 0x3f); ++ ++ l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); ++ DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " ++ "ACCESSTIME %d\n", ++ (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, ++ (l >> 22) & 0x3f); ++} ++#else ++static void rfbi_print_timings(void) {} ++#endif ++ ++ ++ ++ ++static u32 extif_clk_period; ++ ++static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) ++{ ++ int bus_tick = extif_clk_period * div; ++ return (ps + bus_tick - 1) / bus_tick * bus_tick; ++} ++ ++static int calc_reg_timing(struct rfbi_timings *t, int div) ++{ ++ t->clk_div = div; ++ ++ t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); ++ ++ t->we_on_time = round_to_extif_ticks(t->we_on_time, div); ++ t->we_off_time = round_to_extif_ticks(t->we_off_time, div); ++ t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); ++ ++ t->re_on_time = round_to_extif_ticks(t->re_on_time, div); ++ t->re_off_time = round_to_extif_ticks(t->re_off_time, div); ++ t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); ++ ++ t->access_time = round_to_extif_ticks(t->access_time, div); ++ t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); ++ t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); ++ ++ DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", ++ t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); ++ DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", ++ t->we_on_time, t->we_off_time, t->re_cycle_time, ++ t->we_cycle_time); ++ DSSDBG("[reg]rdaccess %d cspulse %d\n", ++ t->access_time, t->cs_pulse_width); ++ ++ return rfbi_convert_timings(t); ++} ++ ++static int calc_extif_timings(struct rfbi_timings *t) ++{ ++ u32 max_clk_div; ++ int div; ++ ++ rfbi_get_clk_info(&extif_clk_period, &max_clk_div); ++ for (div = 1; div <= max_clk_div; div++) { ++ if (calc_reg_timing(t, div) == 0) ++ break; ++ } ++ ++ if (div <= max_clk_div) ++ return 0; ++ ++ DSSERR("can't setup timings\n"); ++ return -1; ++} ++ ++ ++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) ++{ ++ int r; ++ ++ if (!t->converted) { ++ r = calc_extif_timings(t); ++ if (r < 0) ++ DSSERR("Failed to calc timings\n"); ++ } ++ ++ BUG_ON(!t->converted); ++ ++ rfbi_enable_clocks(1); ++ rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); ++ rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); ++ ++ /* TIMEGRANULARITY */ ++ REG_FLD_MOD(RFBI_CONFIG(rfbi_module), ++ (t->tim[2] ? 1 : 0), 4, 4); ++ ++ rfbi_print_timings(); ++ rfbi_enable_clocks(0); ++} ++ ++static int ps_to_rfbi_ticks(int time, int div) ++{ ++ unsigned long tick_ps; ++ int ret; ++ ++ /* Calculate in picosecs to yield more exact results */ ++ tick_ps = 1000000000 / (rfbi.l4_khz) * div; ++ ++ ret = (time + tick_ps - 1) / tick_ps; ++ ++ return ret; ++} ++ ++#ifdef OMAP_RFBI_RATE_LIMIT ++unsigned long rfbi_get_max_tx_rate(void) ++{ ++ unsigned long l4_rate, dss1_rate; ++ int min_l4_ticks = 0; ++ int i; ++ ++ /* According to TI this can't be calculated so make the ++ * adjustments for a couple of known frequencies and warn for ++ * others. ++ */ ++ static const struct { ++ unsigned long l4_clk; /* HZ */ ++ unsigned long dss1_clk; /* HZ */ ++ unsigned long min_l4_ticks; ++ } ftab[] = { ++ { 55, 132, 7, }, /* 7.86 MPix/s */ ++ { 110, 110, 12, }, /* 9.16 MPix/s */ ++ { 110, 132, 10, }, /* 11 Mpix/s */ ++ { 120, 120, 10, }, /* 12 Mpix/s */ ++ { 133, 133, 10, }, /* 13.3 Mpix/s */ ++ }; ++ ++ l4_rate = rfbi.l4_khz / 1000; ++ dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000; ++ ++ for (i = 0; i < ARRAY_SIZE(ftab); i++) { ++ /* Use a window instead of an exact match, to account ++ * for different DPLL multiplier / divider pairs. ++ */ ++ if (abs(ftab[i].l4_clk - l4_rate) < 3 && ++ abs(ftab[i].dss1_clk - dss1_rate) < 3) { ++ min_l4_ticks = ftab[i].min_l4_ticks; ++ break; ++ } ++ } ++ if (i == ARRAY_SIZE(ftab)) { ++ /* Can't be sure, return anyway the maximum not ++ * rate-limited. This might cause a problem only for the ++ * tearing synchronisation. ++ */ ++ DSSERR("can't determine maximum RFBI transfer rate\n"); ++ return rfbi.l4_khz * 1000; ++ } ++ return rfbi.l4_khz * 1000 / min_l4_ticks; ++} ++#else ++int rfbi_get_max_tx_rate(void) ++{ ++ return rfbi.l4_khz * 1000; ++} ++#endif ++ ++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) ++{ ++ *clk_period = 1000000000 / rfbi.l4_khz; ++ *max_clk_div = 2; ++} ++ ++static int rfbi_convert_timings(struct rfbi_timings *t) ++{ ++ u32 l; ++ int reon, reoff, weon, weoff, cson, csoff, cs_pulse; ++ int actim, recyc, wecyc; ++ int div = t->clk_div; ++ ++ if (div <= 0 || div > 2) ++ return -1; ++ ++ /* Make sure that after conversion it still holds that: ++ * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, ++ * csoff > cson, csoff >= max(weoff, reoff), actim > reon ++ */ ++ weon = ps_to_rfbi_ticks(t->we_on_time, div); ++ weoff = ps_to_rfbi_ticks(t->we_off_time, div); ++ if (weoff <= weon) ++ weoff = weon + 1; ++ if (weon > 0x0f) ++ return -1; ++ if (weoff > 0x3f) ++ return -1; ++ ++ reon = ps_to_rfbi_ticks(t->re_on_time, div); ++ reoff = ps_to_rfbi_ticks(t->re_off_time, div); ++ if (reoff <= reon) ++ reoff = reon + 1; ++ if (reon > 0x0f) ++ return -1; ++ if (reoff > 0x3f) ++ return -1; ++ ++ cson = ps_to_rfbi_ticks(t->cs_on_time, div); ++ csoff = ps_to_rfbi_ticks(t->cs_off_time, div); ++ if (csoff <= cson) ++ csoff = cson + 1; ++ if (csoff < max(weoff, reoff)) ++ csoff = max(weoff, reoff); ++ if (cson > 0x0f) ++ return -1; ++ if (csoff > 0x3f) ++ return -1; ++ ++ l = cson; ++ l |= csoff << 4; ++ l |= weon << 10; ++ l |= weoff << 14; ++ l |= reon << 20; ++ l |= reoff << 24; ++ ++ t->tim[0] = l; ++ ++ actim = ps_to_rfbi_ticks(t->access_time, div); ++ if (actim <= reon) ++ actim = reon + 1; ++ if (actim > 0x3f) ++ return -1; ++ ++ wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); ++ if (wecyc < weoff) ++ wecyc = weoff; ++ if (wecyc > 0x3f) ++ return -1; ++ ++ recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); ++ if (recyc < reoff) ++ recyc = reoff; ++ if (recyc > 0x3f) ++ return -1; ++ ++ cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); ++ if (cs_pulse > 0x3f) ++ return -1; ++ ++ l = wecyc; ++ l |= recyc << 6; ++ l |= cs_pulse << 12; ++ l |= actim << 22; ++ ++ t->tim[1] = l; ++ ++ t->tim[2] = div - 1; ++ ++ t->converted = 1; ++ ++ return 0; ++} ++ ++/* xxx FIX module selection missing */ ++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int extif_div) ++{ ++ int hs, vs; ++ int min; ++ u32 l; ++ ++ hs = ps_to_rfbi_ticks(hs_pulse_time, 1); ++ vs = ps_to_rfbi_ticks(vs_pulse_time, 1); ++ if (hs < 2) ++ return -EDOM; ++ if (mode == OMAP_DSS_RFBI_TE_MODE_2) ++ min = 2; ++ else /* OMAP_DSS_RFBI_TE_MODE_1 */ ++ min = 4; ++ if (vs < min) ++ return -EDOM; ++ if (vs == hs) ++ return -EINVAL; ++ rfbi.te_mode = mode; ++ DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", ++ mode, hs, vs, hs_pol_inv, vs_pol_inv); ++ ++ rfbi_enable_clocks(1); ++ rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); ++ rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ if (hs_pol_inv) ++ l &= ~(1 << 21); ++ else ++ l |= 1 << 21; ++ if (vs_pol_inv) ++ l &= ~(1 << 20); ++ else ++ l |= 1 << 20; ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_rfbi_setup_te); ++ ++/* xxx FIX module selection missing */ ++int omap_rfbi_enable_te(int enable, unsigned line) ++{ ++ u32 l; ++ ++ DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); ++ if (line > (1 << 11) - 1) ++ return -EINVAL; ++ ++ rfbi_enable_clocks(1); ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ l &= ~(0x3 << 2); ++ if (enable) { ++ rfbi.te_enabled = 1; ++ l |= rfbi.te_mode << 2; ++ } else ++ rfbi.te_enabled = 0; ++ rfbi_write_reg(RFBI_CONFIG(0), l); ++ rfbi_write_reg(RFBI_LINE_NUMBER, line); ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_rfbi_enable_te); ++ ++#if 0 ++static void rfbi_enable_config(int enable1, int enable2) ++{ ++ u32 l; ++ int cs = 0; ++ ++ if (enable1) ++ cs |= 1<<0; ++ if (enable2) ++ cs |= 1<<1; ++ ++ rfbi_enable_clocks(1); ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ ++ l = FLD_MOD(l, cs, 3, 2); ++ l = FLD_MOD(l, 0, 1, 1); ++ ++ rfbi_write_reg(RFBI_CONTROL, l); ++ ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ ++ /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ ++ /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ ++ ++ l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ ++ l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ ++ l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ ++ ++ l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); ++ rfbi_write_reg(RFBI_CONFIG(0), l); ++ ++ rfbi_enable_clocks(0); ++} ++#endif ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines) ++{ ++ u32 l; ++ int cycle1 = 0, cycle2 = 0, cycle3 = 0; ++ enum omap_rfbi_cycleformat cycleformat; ++ enum omap_rfbi_datatype datatype; ++ enum omap_rfbi_parallelmode parallelmode; ++ ++ switch (bpp) { ++ case 12: ++ datatype = OMAP_DSS_RFBI_DATATYPE_12; ++ break; ++ case 16: ++ datatype = OMAP_DSS_RFBI_DATATYPE_16; ++ break; ++ case 18: ++ datatype = OMAP_DSS_RFBI_DATATYPE_18; ++ break; ++ case 24: ++ datatype = OMAP_DSS_RFBI_DATATYPE_24; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ rfbi.datatype = datatype; ++ ++ switch (lines) { ++ case 8: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; ++ break; ++ case 9: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; ++ break; ++ case 12: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; ++ break; ++ case 16: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ rfbi.parallelmode = parallelmode; ++ ++ if ((bpp % lines) == 0) { ++ switch (bpp / lines) { ++ case 1: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; ++ break; ++ case 2: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; ++ break; ++ case 3: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ } else if ((2 * bpp % lines) == 0) { ++ if ((2 * bpp / lines) == 3) ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; ++ else { ++ BUG(); ++ return 1; ++ } ++ } else { ++ BUG(); ++ return 1; ++ } ++ ++ switch (cycleformat) { ++ case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: ++ cycle1 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: ++ cycle1 = lines; ++ cycle2 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: ++ cycle1 = lines; ++ cycle2 = lines; ++ cycle3 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: ++ cycle1 = lines; ++ cycle2 = (lines / 2) | ((lines / 2) << 16); ++ cycle3 = (lines << 16); ++ break; ++ } ++ ++ rfbi_enable_clocks(1); ++ ++ REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ ++ ++ l = 0; ++ l |= FLD_VAL(parallelmode, 1, 0); ++ l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ ++ l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ ++ l |= FLD_VAL(datatype, 6, 5); ++ /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ ++ l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ ++ l |= FLD_VAL(cycleformat, 10, 9); ++ l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ ++ l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ ++ l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ ++ l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ ++ l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ ++ l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ ++ l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ ++ rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); ++ ++ rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); ++ rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); ++ rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); ++ ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ ++ l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ ++ rfbi_write_reg(RFBI_CONTROL, l); ++ ++ ++ DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", ++ bpp, lines, cycle1, cycle2, cycle3); ++ ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(rfbi_configure); ++ ++static int rfbi_find_display(struct omap_display *disp) ++{ ++ if (disp == rfbi.display[0]) ++ return 0; ++ ++ if (disp == rfbi.display[1]) ++ return 1; ++ ++ BUG(); ++ return -1; ++} ++ ++ ++static void signal_fifo_waiters(void) ++{ ++ if (atomic_read(&rfbi.cmd_fifo_full) > 0) { ++ /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */ ++ complete(&rfbi.cmd_done); ++ atomic_dec(&rfbi.cmd_fifo_full); ++ } ++} ++ ++/* returns 1 for async op, and 0 for sync op */ ++static int do_update(struct omap_display *display, struct update_region *upd) ++{ ++ int x = upd->x; ++ int y = upd->y; ++ int w = upd->w; ++ int h = upd->h; ++ ++ perf_mark_setup(); ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ /*display->ctrl->enable_te(display, 1); */ ++ dispc_setup_partial_planes(display, &x, &y, &w, &h); ++ } ++ ++#ifdef MEASURE_PERF ++ rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */ ++#endif ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ rfbi_transfer_area(w, h, NULL, NULL); ++ return 1; ++ } else { ++ struct omap_overlay *ovl; ++ void *addr; ++ int scr_width; ++ ++ ovl = &display->manager->overlays[0]; ++ scr_width = ovl->info.screen_width; ++ addr = ovl->info.vaddr; ++ ++ omap_rfbi_write_pixels(addr, scr_width, x, y, w, h); ++ ++ perf_show("L4"); ++ ++ return 0; ++ } ++} ++ ++static void process_cmd_fifo(void) ++{ ++ int len; ++ struct update_param p; ++ struct omap_display *display; ++ unsigned long flags; ++ ++ if (atomic_inc_return(&rfbi.cmd_pending) != 1) ++ return; ++ ++ while (true) { ++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); ++ ++ len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, ++ sizeof(struct update_param)); ++ if (len == 0) { ++ DSSDBG("nothing more in fifo\n"); ++ atomic_set(&rfbi.cmd_pending, 0); ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ break; ++ } ++ ++ /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ ++ ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ ++ BUG_ON(len != sizeof(struct update_param)); ++ BUG_ON(p.rfbi_module > 1); ++ ++ display = rfbi.display[p.rfbi_module]; ++ ++ if (p.cmd == RFBI_CMD_UPDATE) { ++ if (do_update(display, &p.par.r)) ++ break; /* async op */ ++ } else if (p.cmd == RFBI_CMD_SYNC) { ++ DSSDBG("Signaling SYNC done!\n"); ++ complete(p.par.sync); ++ } else ++ BUG(); ++ } ++ ++ signal_fifo_waiters(); ++} ++ ++static void rfbi_push_cmd(struct update_param *p) ++{ ++ int ret; ++ ++ while (1) { ++ unsigned long flags; ++ int available; ++ ++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); ++ available = RFBI_CMD_FIFO_LEN_BYTES - ++ __kfifo_len(rfbi.cmd_fifo); ++ ++/* DSSDBG("%d bytes left in fifo\n", available); */ ++ if (available < sizeof(struct update_param)) { ++ DSSDBG("Going to wait because FIFO FULL..\n"); ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ atomic_inc(&rfbi.cmd_fifo_full); ++ wait_for_completion(&rfbi.cmd_done); ++ /*DSSDBG("Woke up because fifo not full anymore\n");*/ ++ continue; ++ } ++ ++ ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, ++ sizeof(struct update_param)); ++/* DSSDBG("pushed %d bytes\n", ret);*/ ++ ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ ++ BUG_ON(ret != sizeof(struct update_param)); ++ ++ break; ++ } ++} ++ ++static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h) ++{ ++ struct update_param p; ++ ++ p.rfbi_module = rfbi_module; ++ p.cmd = RFBI_CMD_UPDATE; ++ ++ p.par.r.x = x; ++ p.par.r.y = y; ++ p.par.r.w = w; ++ p.par.r.h = h; ++ ++ DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h); ++ ++ rfbi_push_cmd(&p); ++ ++ process_cmd_fifo(); ++} ++ ++static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp) ++{ ++ struct update_param p; ++ ++ p.rfbi_module = rfbi_module; ++ p.cmd = RFBI_CMD_SYNC; ++ p.par.sync = sync_comp; ++ ++ rfbi_push_cmd(&p); ++ ++ DSSDBG("RFBI sync pushed to cmd fifo\n"); ++ ++ process_cmd_fifo(); ++} ++ ++int rfbi_init(void) ++{ ++ u32 rev; ++ u32 l; ++ ++ spin_lock_init(&rfbi.cmd_lock); ++ rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, ++ &rfbi.cmd_lock); ++ if (IS_ERR(rfbi.cmd_fifo)) ++ return -ENOMEM; ++ ++ init_completion(&rfbi.cmd_done); ++ atomic_set(&rfbi.cmd_fifo_full, 0); ++ atomic_set(&rfbi.cmd_pending, 0); ++ ++ rfbi.base = ioremap(RFBI_BASE, SZ_256); ++ if (!rfbi.base) { ++ DSSERR("can't ioremap RFBI\n"); ++ return -ENOMEM; ++ } ++ ++ rfbi_enable_clocks(1); ++ ++ msleep(10); ++ ++ rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000; ++ ++ /* Enable autoidle and smart-idle */ ++ l = rfbi_read_reg(RFBI_SYSCONFIG); ++ l |= (1 << 0) | (2 << 3); ++ rfbi_write_reg(RFBI_SYSCONFIG, l); ++ ++ rev = rfbi_read_reg(RFBI_REVISION); ++ printk(KERN_INFO "OMAP RFBI rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++ ++void rfbi_exit(void) ++{ ++ DSSDBG("rfbi_exit\n"); ++ ++ kfifo_free(rfbi.cmd_fifo); ++ ++ iounmap(rfbi.base); ++} ++ ++/* struct omap_display support */ ++static int rfbi_display_update(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ int rfbi_module; ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ rfbi_module = rfbi_find_display(display); ++ ++ rfbi_push_update(rfbi_module, x, y, w, h); ++ ++ return 0; ++} ++ ++static int rfbi_display_sync(struct omap_display *display) ++{ ++ struct completion sync_comp; ++ int rfbi_module; ++ ++ rfbi_module = rfbi_find_display(display); ++ ++ init_completion(&sync_comp); ++ rfbi_push_sync(rfbi_module, &sync_comp); ++ DSSDBG("Waiting for SYNC to happen...\n"); ++ wait_for_completion(&sync_comp); ++ DSSDBG("Released from SYNC\n"); ++ return 0; ++} ++ ++static int rfbi_display_enable_te(struct omap_display *display, int enable) ++{ ++ display->ctrl->enable_te(display, enable); ++ return 0; ++} ++ ++static int rfbi_display_enable(struct omap_display *display) ++{ ++ int r; ++ ++ BUG_ON(display->panel == NULL || display->ctrl == NULL); ++ ++ r = omap_dispc_register_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ if (r) { ++ DSSERR("can't get FRAMEDONE irq\n"); ++ return r; ++ } ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); ++ ++ dispc_set_tft_data_lines(display->ctrl->pixel_size); ++ ++ rfbi_configure(display->hw_config.u.rfbi.channel, ++ display->ctrl->pixel_size, ++ display->hw_config.u.rfbi.data_lines); ++ ++ rfbi_set_timings(display->hw_config.u.rfbi.channel, ++ &display->ctrl->timings); ++ ++ ++ if (display->ctrl && display->ctrl->enable) { ++ r = display->ctrl->enable(display); ++ if (r) ++ goto err; ++ } ++ ++ if (display->panel && display->panel->enable) { ++ r = display->panel->enable(display); ++ if (r) ++ goto err; ++ } ++ ++ return 0; ++err: ++ return -ENODEV; ++} ++ ++static void rfbi_display_disable(struct omap_display *display) ++{ ++ display->ctrl->disable(display); ++ omap_dispc_unregister_isr(framedone_callback); ++} ++ ++void rfbi_init_display(struct omap_display *display) ++{ ++ display->enable = rfbi_display_enable; ++ display->disable = rfbi_display_disable; ++ display->update = rfbi_display_update; ++ display->sync = rfbi_display_sync; ++ display->enable_te = rfbi_display_enable_te; ++ ++ rfbi.display[display->hw_config.u.rfbi.channel] = display; ++ ++ display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++} +diff --git a/arch/arm/plat-omap/dss/sdi.c b/arch/arm/plat-omap/dss/sdi.c +new file mode 100644 +index 0000000..02d549b +--- /dev/null ++++ b/arch/arm/plat-omap/dss/sdi.c +@@ -0,0 +1,174 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/sdi.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "SDI" ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "dss.h" ++ ++ ++static struct { ++ int update_enabled; ++} sdi; ++ ++static int sdi_display_enable(struct omap_display *display) ++{ ++ struct dispc_clock_info cinfo; ++ int lck_div, pck_div; ++ unsigned long fck; ++ struct omap_panel *panel = display->panel; ++ unsigned high, low, burst; ++ unsigned long pck; ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ return -EINVAL; ++ } ++ ++ panel->enable(display); ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); ++ ++ dispc_set_burst_size(OMAP_DSS_GFX, OMAP_DSS_BURST_16x32); ++ dispc_set_burst_size(OMAP_DSS_VIDEO1, OMAP_DSS_BURST_16x32); ++ dispc_set_burst_size(OMAP_DSS_VIDEO2, OMAP_DSS_BURST_16x32); ++ ++ burst = 16 * 32 / 8; ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_GFX) - burst; ++ low = dispc_get_plane_fifo_size(OMAP_DSS_GFX) / 4 * 3; ++ dispc_setup_plane_fifo(OMAP_DSS_GFX, low, high); ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) - burst; ++ low = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) / 4 * 3; ++ dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, low, high); ++ ++ high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) - burst; ++ low = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) / 4 * 3; ++ dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, low, high); ++ ++ /* 15.5.9.1.2 */ ++ panel->config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; ++ ++ dispc_set_pol_freq(panel); ++ ++ dispc_calc_clock_div(1, panel->timings.pixel_clock * 1000, ++ &cinfo); ++ ++ if (dispc_set_clock_div(&cinfo)) { ++ DSSERR("Failed to set DSS clocks\n"); ++ return -EINVAL; ++ } ++ ++ fck = cinfo.fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ if (pck != panel->timings.pixel_clock) { ++ DSSWARN("Could not find exact pixel clock. Requested %d kHz, " ++ "got %lu kHz\n", ++ panel->timings.pixel_clock, pck); ++ ++ panel->timings.pixel_clock = pck; ++ } ++ ++ dispc_set_lcd_timings(&panel->timings); ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ dispc_set_tft_data_lines(24); ++ dispc_lcd_enable_signal_polarity(1); ++ dispc_pck_free_enable(1); ++ ++ dss_sdi_init(display->hw_config.u.sdi.datapairs); ++ ++ mdelay(2); ++ ++ dispc_enable_lcd_out(1); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static void sdi_display_disable(struct omap_display *display) ++{ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) ++ return; ++ ++ display->panel->disable(display); ++ dispc_enable_lcd_out(0); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++} ++ ++static int sdi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return -EINVAL; ++ ++ if (mode == OMAP_DSS_UPDATE_DISABLED) { ++ dispc_enable_lcd_out(0); ++ sdi.update_enabled = 0; ++ } else { ++ dispc_enable_lcd_out(1); ++ sdi.update_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode sdi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO : ++ OMAP_DSS_UPDATE_DISABLED; ++} ++ ++ ++void sdi_init_display(struct omap_display *display) ++{ ++ DSSDBG("SDI init\n"); ++ ++ display->enable = sdi_display_enable; ++ display->disable = sdi_display_disable; ++ display->set_update_mode = sdi_display_set_update_mode; ++ display->get_update_mode = sdi_display_get_update_mode; ++} ++ ++int sdi_init(void) ++{ ++ return 0; ++} ++ ++void sdi_exit(void) ++{ ++} +diff --git a/arch/arm/plat-omap/dss/venc.c b/arch/arm/plat-omap/dss/venc.c +new file mode 100644 +index 0000000..81319e4 +--- /dev/null ++++ b/arch/arm/plat-omap/dss/venc.c +@@ -0,0 +1,506 @@ ++/* ++ * linux/arch/arm/plat-omap/dss/venc.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * VENC settings from TI's DSS driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "VENC" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "dss.h" ++ ++#define VENC_BASE 0x48050C00 ++ ++/* Venc registers */ ++#define VENC_REV_ID 0x00 ++#define VENC_STATUS 0x04 ++#define VENC_F_CONTROL 0x08 ++#define VENC_VIDOUT_CTRL 0x10 ++#define VENC_SYNC_CTRL 0x14 ++#define VENC_LLEN 0x1C ++#define VENC_FLENS 0x20 ++#define VENC_HFLTR_CTRL 0x24 ++#define VENC_CC_CARR_WSS_CARR 0x28 ++#define VENC_C_PHASE 0x2C ++#define VENC_GAIN_U 0x30 ++#define VENC_GAIN_V 0x34 ++#define VENC_GAIN_Y 0x38 ++#define VENC_BLACK_LEVEL 0x3C ++#define VENC_BLANK_LEVEL 0x40 ++#define VENC_X_COLOR 0x44 ++#define VENC_M_CONTROL 0x48 ++#define VENC_BSTAMP_WSS_DATA 0x4C ++#define VENC_S_CARR 0x50 ++#define VENC_LINE21 0x54 ++#define VENC_LN_SEL 0x58 ++#define VENC_L21__WC_CTL 0x5C ++#define VENC_HTRIGGER_VTRIGGER 0x60 ++#define VENC_SAVID__EAVID 0x64 ++#define VENC_FLEN__FAL 0x68 ++#define VENC_LAL__PHASE_RESET 0x6C ++#define VENC_HS_INT_START_STOP_X 0x70 ++#define VENC_HS_EXT_START_STOP_X 0x74 ++#define VENC_VS_INT_START_X 0x78 ++#define VENC_VS_INT_STOP_X__VS_INT_START_Y 0x7C ++#define VENC_VS_INT_STOP_Y__VS_EXT_START_X 0x80 ++#define VENC_VS_EXT_STOP_X__VS_EXT_START_Y 0x84 ++#define VENC_VS_EXT_STOP_Y 0x88 ++#define VENC_AVID_START_STOP_X 0x90 ++#define VENC_AVID_START_STOP_Y 0x94 ++#define VENC_FID_INT_START_X__FID_INT_START_Y 0xA0 ++#define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X 0xA4 ++#define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y 0xA8 ++#define VENC_TVDETGP_INT_START_STOP_X 0xB0 ++#define VENC_TVDETGP_INT_START_STOP_Y 0xB4 ++#define VENC_GEN_CTRL 0xB8 ++#define VENC_OUTPUT_CONTROL 0xC4 ++#define VENC_DAC_B__DAC_C 0xC8 ++ ++struct venc_config { ++ u32 f_control; ++ u32 vidout_ctrl; ++ u32 sync_ctrl; ++ u32 llen; ++ u32 flens; ++ u32 hfltr_ctrl; ++ u32 cc_carr_wss_carr; ++ u32 c_phase; ++ u32 gain_u; ++ u32 gain_v; ++ u32 gain_y; ++ u32 black_level; ++ u32 blank_level; ++ u32 x_color; ++ u32 m_control; ++ u32 bstamp_wss_data; ++ u32 s_carr; ++ u32 line21; ++ u32 ln_sel; ++ u32 l21__wc_ctl; ++ u32 htrigger_vtrigger; ++ u32 savid__eavid; ++ u32 flen__fal; ++ u32 lal__phase_reset; ++ u32 hs_int_start_stop_x; ++ u32 hs_ext_start_stop_x; ++ u32 vs_int_start_x; ++ u32 vs_int_stop_x__vs_int_start_y; ++ u32 vs_int_stop_y__vs_ext_start_x; ++ u32 vs_ext_stop_x__vs_ext_start_y; ++ u32 vs_ext_stop_y; ++ u32 avid_start_stop_x; ++ u32 avid_start_stop_y; ++ u32 fid_int_start_x__fid_int_start_y; ++ u32 fid_int_offset_y__fid_ext_start_x; ++ u32 fid_ext_start_y__fid_ext_offset_y; ++ u32 tvdetgp_int_start_stop_x; ++ u32 tvdetgp_int_start_stop_y; ++ u32 gen_ctrl; ++ ++ int width; ++ int height; ++}; ++ ++/* from TRM */ ++static const struct venc_config venc_config_pal_trm = { ++ .f_control = 0, ++ .vidout_ctrl = 1, ++ .sync_ctrl = 0x40, ++ .llen = 0x35F, /* 863 */ ++ .flens = 0x270, /* 624 */ ++ .hfltr_ctrl = 0, ++ .cc_carr_wss_carr = 0x2F7225ED, ++ .c_phase = 0, ++ .gain_u = 0x111, ++ .gain_v = 0x181, ++ .gain_y = 0x140, ++ .black_level = 0x3B, ++ .blank_level = 0x3B, ++ .x_color = 0x7, ++ .m_control = 0x2, ++ .bstamp_wss_data = 0x3F, ++ .s_carr = 0x2A098ACB, ++ .line21 = 0, ++ .ln_sel = 0x01290015, ++ .l21__wc_ctl = 0x0000F603, ++ .htrigger_vtrigger = 0, ++ ++ .savid__eavid = 0x06A70108, ++ .flen__fal = 0x00180270, ++ .lal__phase_reset = 0x00180270, ++ .hs_int_start_stop_x = 0x00880358, ++ .hs_ext_start_stop_x = 0x000F035F, ++ .vs_int_start_x = 0x01A70000, ++ .vs_int_stop_x__vs_int_start_y = 0x000001A7, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0000, ++ .vs_ext_stop_x__vs_ext_start_y = 0x000101AF, ++ .vs_ext_stop_y = 0x00000025, ++ .avid_start_stop_x = 0x03530083, ++ .avid_start_stop_y = 0x026C002E, ++ .fid_int_start_x__fid_int_start_y = 0x0001008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01380001, ++ ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00FF0000, ++ ++ .width = 720, ++ .height = 574, /* for some reason, this isn't 576 */ ++}; ++ ++/* from TRM */ ++static const struct venc_config venc_config_ntsc_trm = { ++ .f_control = 0, ++ .vidout_ctrl = 1, ++ .sync_ctrl = 0x8040, ++ .llen = 0x359, ++ .flens = 0x20C, ++ .hfltr_ctrl = 0, ++ .cc_carr_wss_carr = 0x043F2631, ++ .c_phase = 0, ++ .gain_u = 0x102, ++ .gain_v = 0x16C, ++ .gain_y = 0x12F, ++ .black_level = 0x43, ++ .blank_level = 0x38, ++ .x_color = 0x7, ++ .m_control = 0x1, ++ .bstamp_wss_data = 0x38, ++ .s_carr = 0x21F07C1F, ++ .line21 = 0, ++ .ln_sel = 0x01310011, ++ .l21__wc_ctl = 0x0000F003, ++ .htrigger_vtrigger = 0, ++ ++ .savid__eavid = 0x069300F4, ++ .flen__fal = 0x0016020C, ++ .lal__phase_reset = 0x00060107, ++ .hs_int_start_stop_x = 0x008E0350, ++ .hs_ext_start_stop_x = 0x000F0359, ++ .vs_int_start_x = 0x01A00000, ++ .vs_int_stop_x__vs_int_start_y = 0x020701A0, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, ++ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, ++ .vs_ext_stop_y = 0x00000006, ++ .avid_start_stop_x = 0x03480078, ++ .avid_start_stop_y = 0x02060024, ++ .fid_int_start_x__fid_int_start_y = 0x0001008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01060006, ++ ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00F90000, ++ ++ .width = 720, ++ .height = 482, ++}; ++ ++static const struct venc_config venc_config_pal_bdghi = { ++ .f_control = 0, ++ .vidout_ctrl = 0, ++ .sync_ctrl = 0, ++ .hfltr_ctrl = 0, ++ .x_color = 0, ++ .line21 = 0, ++ .ln_sel = 21, ++ .htrigger_vtrigger = 0, ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00FB0000, ++ ++ .llen = 864-1, ++ .flens = 625-1, ++ .cc_carr_wss_carr = 0x2F7625ED, ++ .c_phase = 0xDF, ++ .gain_u = 0x111, ++ .gain_v = 0x181, ++ .gain_y = 0x140, ++ .black_level = 0x3e, ++ .blank_level = 0x3e, ++ .m_control = 0<<2 | 1<<1, ++ .bstamp_wss_data = 0x42, ++ .s_carr = 0x2a098acb, ++ .l21__wc_ctl = 0<<13 | 0x16<<8 | 0<<0, ++ .savid__eavid = 0x06A70108, ++ .flen__fal = 23<<16 | 624<<0, ++ .lal__phase_reset = 2<<17 | 310<<0, ++ .hs_int_start_stop_x = 0x00920358, ++ .hs_ext_start_stop_x = 0x000F035F, ++ .vs_int_start_x = 0x1a7<<16, ++ .vs_int_stop_x__vs_int_start_y = 0x000601A7, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0036, ++ .vs_ext_stop_x__vs_ext_start_y = 0x27101af, ++ .vs_ext_stop_y = 0x05, ++ .avid_start_stop_x = 0x03530082, ++ .avid_start_stop_y = 0x0270002E, ++ .fid_int_start_x__fid_int_start_y = 0x0005008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01380005, ++ ++ .width = 720, ++ .height = 576, ++}; ++ ++static struct { ++ void __iomem *base; ++ const struct venc_config *config; ++ struct mutex venc_lock; ++} venc; ++ ++static struct omap_panel venc_panel = { ++ .name = "tv-out", ++ .bpp = 24, ++}; ++ ++static inline void venc_write_reg(int idx, u32 val) ++{ ++ __raw_writel(val, venc.base + idx); ++} ++ ++static inline u32 venc_read_reg(int idx) ++{ ++ u32 l = __raw_readl(venc.base + idx); ++ return l; ++} ++ ++static void venc_write_config(const struct venc_config *config) ++{ ++ DSSDBG("write venc conf\n"); ++ ++ venc_write_reg(VENC_LLEN, config->llen); ++ venc_write_reg(VENC_FLENS, config->flens); ++ venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr); ++ venc_write_reg(VENC_C_PHASE, config->c_phase); ++ venc_write_reg(VENC_GAIN_U, config->gain_u); ++ venc_write_reg(VENC_GAIN_V, config->gain_v); ++ venc_write_reg(VENC_GAIN_Y, config->gain_y); ++ venc_write_reg(VENC_BLACK_LEVEL, config->black_level); ++ venc_write_reg(VENC_BLANK_LEVEL, config->blank_level); ++ venc_write_reg(VENC_M_CONTROL, config->m_control); ++ venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data); ++ venc_write_reg(VENC_S_CARR, config->s_carr); ++ venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl); ++ venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid); ++ venc_write_reg(VENC_FLEN__FAL, config->flen__fal); ++ venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset); ++ venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x); ++ venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x); ++ venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x); ++ venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y, ++ config->vs_int_stop_x__vs_int_start_y); ++ venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X, ++ config->vs_int_stop_y__vs_ext_start_x); ++ venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y, ++ config->vs_ext_stop_x__vs_ext_start_y); ++ venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y); ++ venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x); ++ venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y); ++ venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y, ++ config->fid_int_start_x__fid_int_start_y); ++ venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X, ++ config->fid_int_offset_y__fid_ext_start_x); ++ venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y, ++ config->fid_ext_start_y__fid_ext_offset_y); ++ ++ venc_write_reg(VENC_DAC_B__DAC_C, venc_read_reg(VENC_DAC_B__DAC_C)); ++ venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl); ++ venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl); ++ venc_write_reg(VENC_X_COLOR, config->x_color); ++ venc_write_reg(VENC_LINE21, config->line21); ++ venc_write_reg(VENC_LN_SEL, config->ln_sel); ++ venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger); ++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_X, ++ config->tvdetgp_int_start_stop_x); ++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y, ++ config->tvdetgp_int_start_stop_y); ++ venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl); ++ venc_write_reg(VENC_F_CONTROL, config->f_control); ++ venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl); ++} ++ ++static void venc_reset(void) ++{ ++ int t = 1000; ++ ++ venc_write_reg(VENC_F_CONTROL, venc_read_reg(VENC_F_CONTROL) | (1<<8)); ++ while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) { ++ if (--t == 0) { ++ DSSERR("Failed to reset venc\n"); ++ return; ++ } ++ } ++} ++ ++static void venc_enable_clocks(int enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | ++ DSS_CLK_96M); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | ++ DSS_CLK_96M); ++} ++ ++int venc_init(void) ++{ ++ u8 rev_id; ++ int use_pal = 1; /* XXX */ ++ ++ mutex_init(&venc.venc_lock); ++ ++ if (use_pal) ++ venc.config = &venc_config_pal_trm; ++ else ++ venc.config = &venc_config_ntsc_trm; ++ ++ venc_panel.timings.x_res = venc.config->width; ++ venc_panel.timings.y_res = venc.config->height; ++ ++ venc.base = ioremap(VENC_BASE, SZ_1K); ++ if (!venc.base) { ++ DSSERR("can't ioremap VENC\n"); ++ return -ENOMEM; ++ } ++ ++ /* enable clocks */ ++ venc_enable_clocks(1); ++ ++ /* configure venc */ ++ venc_reset(); ++ venc_write_config(venc.config); ++ ++ rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff); ++ printk(KERN_INFO "OMAP VENC rev %d\n", rev_id); ++ ++ venc_enable_clocks(0); ++ ++ return 0; ++} ++ ++void venc_exit(void) ++{ ++ iounmap(venc.base); ++} ++ ++static void venc_sync_lost_handler(void *arg, u32 mask) ++{ ++ /* we just catch SYNC_LOST_DIGIT here so that ++ * dispc doesn't take it as an error */ ++} ++ ++static int venc_enable_display(struct omap_display *display) ++{ ++ DSSDBG("venc_enable_display\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ mutex_unlock(&venc.venc_lock); ++ return -EINVAL; ++ } ++ ++ venc_enable_clocks(1); ++ ++ dss_set_venc_output(display->hw_config.u.venc.type); ++ dss_set_dac_pwrdn_bgz(1); ++ ++ if (display->hw_config.u.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE) { ++ if (cpu_is_omap24xx()) ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0x2); ++ else ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0xa); ++ } else { /* S-Video */ ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0xd); ++ } ++ ++ venc_write_config(venc.config); ++ ++ dispc_set_digit_size(venc.config->width, venc.config->height/2); ++ ++ if (display->hw_config.panel_enable) ++ display->hw_config.panel_enable(display); ++ ++ dispc_go(OMAP_DSS_CHANNEL_DIGIT); ++ ++ omap_dispc_register_isr(venc_sync_lost_handler, NULL, ++ DISPC_IRQ_SYNC_LOST_DIGIT); ++ ++ dispc_enable_digit_out(1); ++ ++ mdelay(20); ++ ++ omap_dispc_unregister_isr(venc_sync_lost_handler); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ mutex_unlock(&venc.venc_lock); ++ ++ return 0; ++} ++ ++static void venc_disable_display(struct omap_display *display) ++{ ++ DSSDBG("venc_disable_display\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) { ++ mutex_unlock(&venc.venc_lock); ++ return; ++ } ++ ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0); ++ dss_set_dac_pwrdn_bgz(0); ++ ++ dispc_enable_digit_out(0); ++ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ ++ venc_enable_clocks(0); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++ ++ mutex_unlock(&venc.venc_lock); ++} ++ ++static void venc_get_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ *timings = venc_panel.timings; ++} ++ ++void venc_init_display(struct omap_display *display) ++{ ++ display->panel = &venc_panel; ++ display->enable = venc_enable_display; ++ display->disable = venc_disable_display; ++ display->get_timings = venc_get_timings; ++} +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +new file mode 100644 +index 0000000..49ab00a +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -0,0 +1,462 @@ ++/* ++ * linux/include/asm-arm/arch-omap/display.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#ifndef __ASM_ARCH_OMAP_DISPLAY_H ++#define __ASM_ARCH_OMAP_DISPLAY_H ++ ++#include ++ ++#define DISPC_IRQ_FRAMEDONE (1 << 0) ++#define DISPC_IRQ_VSYNC (1 << 1) ++#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) ++#define DISPC_IRQ_EVSYNC_ODD (1 << 3) ++#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) ++#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) ++#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) ++#define DISPC_IRQ_GFX_END_WIN (1 << 7) ++#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) ++#define DISPC_IRQ_OCP_ERR (1 << 9) ++#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) ++#define DISPC_IRQ_VID1_END_WIN (1 << 11) ++#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) ++#define DISPC_IRQ_VID2_END_WIN (1 << 13) ++#define DISPC_IRQ_SYNC_LOST (1 << 14) ++#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) ++ ++enum omap_display_type { ++ OMAP_DISPLAY_TYPE_NONE = 0, ++ OMAP_DISPLAY_TYPE_DPI = 1 << 0, ++ OMAP_DISPLAY_TYPE_DBI = 1 << 1, ++ OMAP_DISPLAY_TYPE_SDI = 1 << 2, ++ OMAP_DISPLAY_TYPE_DSI = 1 << 3, ++ OMAP_DISPLAY_TYPE_VENC = 1 << 4, ++}; ++ ++enum omap_plane { ++ OMAP_DSS_GFX = 0, ++ OMAP_DSS_VIDEO1 = 1, ++ OMAP_DSS_VIDEO2 = 2 ++}; ++ ++enum omap_channel { ++ OMAP_DSS_CHANNEL_LCD = 0, ++ OMAP_DSS_CHANNEL_DIGIT = 1, ++}; ++ ++enum omap_color_mode { ++ OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ ++ OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ ++ OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ ++ OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ ++ OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ ++ OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ ++ OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ ++ OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ ++ OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ ++ OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ ++ OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ ++ OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ ++ OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ ++ OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ ++ ++ OMAP_DSS_COLOR_GFX_OMAP3 = ++ OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | ++ OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | ++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | ++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | ++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | ++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, ++ ++ OMAP_DSS_COLOR_VID_OMAP3 = ++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | ++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | ++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | ++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 | ++ OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, ++}; ++ ++enum omap_lcd_display_type { ++ OMAP_DSS_LCD_DISPLAY_STN, ++ OMAP_DSS_LCD_DISPLAY_TFT, ++}; ++ ++enum omap_dss_load_mode { ++ OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, ++ OMAP_DSS_LOAD_CLUT_ONLY = 1, ++ OMAP_DSS_LOAD_FRAME_ONLY = 2, ++ OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, ++}; ++ ++enum omap_dss_color_key_type { ++ OMAP_DSS_COLOR_KEY_GFX_DST = 0, ++ OMAP_DSS_COLOR_KEY_VID_SRC = 1, ++}; ++ ++enum omap_rfbi_te_mode { ++ OMAP_DSS_RFBI_TE_MODE_1 = 1, ++ OMAP_DSS_RFBI_TE_MODE_2 = 2, ++}; ++ ++enum omap_panel_config { ++ OMAP_DSS_LCD_IVS = 1<<0, ++ OMAP_DSS_LCD_IHS = 1<<1, ++ OMAP_DSS_LCD_IPC = 1<<2, ++ OMAP_DSS_LCD_IEO = 1<<3, ++ OMAP_DSS_LCD_RF = 1<<4, ++ OMAP_DSS_LCD_ONOFF = 1<<5, ++ ++ OMAP_DSS_LCD_TFT = 1<<20, ++}; ++ ++enum omap_dss_venc_type { ++ OMAP_DSS_VENC_TYPE_COMPOSITE, ++ OMAP_DSS_VENC_TYPE_SVIDEO, ++}; ++ ++struct omap_display; ++struct omap_panel; ++struct omap_ctrl; ++ ++/* RFBI */ ++ ++struct rfbi_timings { ++ int cs_on_time; ++ int cs_off_time; ++ int we_on_time; ++ int we_off_time; ++ int re_on_time; ++ int re_off_time; ++ int we_cycle_time; ++ int re_cycle_time; ++ int cs_pulse_width; ++ int access_time; ++ ++ int clk_div; ++ ++ u32 tim[5]; /* set by rfbi_convert_timings() */ ++ ++ int converted; ++}; ++ ++void omap_rfbi_write_command(const void *buf, u32 len); ++void omap_rfbi_read_data(void *buf, u32 len); ++void omap_rfbi_write_data(const void *buf, u32 len); ++void omap_rfbi_write_pixels(const void *buf, int scr_width, int x, int y, ++ int w, int h); ++int omap_rfbi_enable_te(int enable, unsigned line); ++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int extif_div); ++ ++/* DSI */ ++int dsi_vc_dcs_write(int channel, u8 *data, int len); ++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); ++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); ++int dsi_vc_set_max_rx_packet_size(int channel, u16 len); ++int dsi_vc_send_null(int channel); ++ ++/* Board specific data */ ++struct omap_display_data { ++ enum omap_display_type type; ++ ++ union { ++ struct { ++ int data_lines; ++ } dpi; ++ ++ struct { ++ int channel; ++ int data_lines; ++ } rfbi; ++ ++ struct { ++ int datapairs; ++ } sdi; ++ ++ struct { ++ int clk_lane; ++ int clk_pol; ++ int data1_lane; ++ int data1_pol; ++ int data2_lane; ++ int data2_pol; ++ unsigned long ddr_clk_hz; ++ } dsi; ++ ++ struct { ++ enum omap_dss_venc_type type; ++ } venc; ++ } u; ++ ++ int panel_reset_gpio; ++ int ctrl_reset_gpio; ++ ++ const char *name; /* for debug */ ++ const char *ctrl_name; ++ const char *panel_name; ++ ++ void *priv; ++ ++ /* platform specific enable/disable */ ++ int (*panel_enable)(struct omap_display *display); ++ void (*panel_disable)(struct omap_display *display); ++ int (*ctrl_enable)(struct omap_display *display); ++ void (*ctrl_disable)(struct omap_display *display); ++ int (*set_backlight)(struct omap_display *display, ++ int level); ++}; ++ ++struct device; ++ ++/* Board specific data */ ++struct omap_dss_platform_data { ++ unsigned (*get_last_off_on_transaction_id)(struct device *dev); ++ int num_displays; ++ struct omap_display_data *displays[]; ++}; ++ ++struct omap_ctrl { ++ struct module *owner; ++ ++ const char *name; ++ ++ int (*init)(struct omap_display *display); ++ void (*cleanup)(struct omap_display *display); ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ void (*setup_update)(struct omap_display *display, ++ int x, int y, int w, int h); ++ ++ int (*enable_te)(struct omap_display *display, int enable); ++ ++ int (*rotate)(struct omap_display *display, int rotate); ++ int (*mirror)(struct omap_display *display, int enable); ++ ++ int (*run_test)(struct omap_display *display, int test); ++ ++ int pixel_size; ++ ++ struct rfbi_timings timings; ++ ++ void *priv; ++}; ++ ++struct omap_video_timings { ++ /* Unit: pixels */ ++ u16 x_res; ++ /* Unit: pixels */ ++ u16 y_res; ++ /* Unit: KHz */ ++ u32 pixel_clock; ++ /* Unit: pixel clocks */ ++ u16 hsw; /* Horizontal synchronization pulse width */ ++ /* Unit: pixel clocks */ ++ u16 hfp; /* Horizontal front porch */ ++ /* Unit: pixel clocks */ ++ u16 hbp; /* Horizontal back porch */ ++ /* Unit: line clocks */ ++ u16 vsw; /* Vertical synchronization pulse width */ ++ /* Unit: line clocks */ ++ u16 vfp; /* Vertical front porch */ ++ /* Unit: line clocks */ ++ u16 vbp; /* Vertical back porch */ ++ ++}; ++ ++struct omap_panel { ++ struct module *owner; ++ ++ const char *name; ++ ++ int (*init)(struct omap_display *display); ++ void (*cleanup)(struct omap_display *display); ++ int (*remove)(struct omap_display *display); ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ int (*run_test)(struct omap_display *display, int test); ++ ++ struct omap_video_timings timings; ++ ++ int acbi; /* ac-bias pin transitions per interrupt */ ++ /* Unit: line clocks */ ++ int acb; /* ac-bias pin frequency */ ++ ++ enum omap_panel_config config; ++ ++ int bpp; ++ ++ void *priv; ++}; ++ ++/* XXX perhaps this should be removed */ ++enum omap_dss_overlay_managers { ++ OMAP_DSS_OVL_MGR_LCD, ++ OMAP_DSS_OVL_MGR_TV, ++}; ++ ++struct omap_overlay_manager; ++ ++struct omap_overlay_info { ++ int enabled; ++ u32 paddr; ++ void *vaddr; ++ int screen_width; ++ int pos_x; ++ int pos_y; ++ int width; ++ int height; ++ int out_width; /* if 0, out_width == width */ ++ int out_height; /* if 0, out_height == height */ ++ enum omap_color_mode color_mode; ++}; ++ ++enum omap_overlay_caps { ++ OMAP_DSS_OVL_CAP_SCALE = 1 << 0, ++}; ++ ++struct omap_overlay { ++ ++ const char *name; ++ int id; ++ struct omap_overlay_manager *manager; ++ enum omap_color_mode supported_modes; ++ struct omap_overlay_info info; ++ enum omap_overlay_caps caps; ++ ++ int (*set_manager)(struct omap_overlay *ovl, ++ struct omap_overlay_manager *mgr); ++ int (*unset_manager)(struct omap_overlay *ovl); ++ ++ int (*setup_input)(struct omap_overlay *ovl, ++ u32 paddr, void *vaddr, ++ int screen_width, ++ int width, int height, ++ enum omap_color_mode color_mode); ++ int (*setup_output)(struct omap_overlay *ovl, ++ int pos_x, int pos_y, ++ int out_width, int out_height); ++ int (*enable)(struct omap_overlay *ovl, int enable); ++}; ++ ++enum omap_overlay_manager_caps { ++ OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, ++}; ++ ++struct omap_overlay_manager { ++ ++ const char *name; ++ int id; ++ enum omap_overlay_manager_caps caps; ++ struct omap_display *display; ++ int num_overlays; ++ struct omap_overlay *overlays; ++ enum omap_display_type supported_displays; ++ ++ int (*set_display)(struct omap_overlay_manager *mgr, ++ struct omap_display *display); ++ int (*unset_display)(struct omap_overlay_manager *mgr); ++ ++ int (*apply)(struct omap_overlay_manager *mgr); ++}; ++ ++enum omap_display_caps { ++ OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, ++}; ++ ++enum omap_dss_update_mode { ++ OMAP_DSS_UPDATE_DISABLED = 0, ++ OMAP_DSS_UPDATE_AUTO, ++ OMAP_DSS_UPDATE_MANUAL, ++}; ++ ++enum omap_dss_display_state { ++ OMAP_DSS_DISPLAY_DISABLED = 0, ++ OMAP_DSS_DISPLAY_ACTIVE, ++ OMAP_DSS_DISPLAY_SUSPENDED, ++}; ++ ++struct omap_display { ++ /*atomic_t ref_count;*/ ++ int ref_count; ++ ++ enum omap_display_type type; ++ const char *name; ++ ++ enum omap_display_caps caps; ++ ++ struct omap_overlay_manager *manager; ++ ++ enum omap_dss_display_state state; ++ ++ struct omap_display_data hw_config; /* board specific data */ ++ struct omap_ctrl *ctrl; /* static common data */ ++ struct omap_panel *panel; /* static common data */ ++ ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ ++ int (*check_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ void (*set_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ void (*get_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ int (*update)(struct omap_display *display, ++ int x, int y, int w, int h); ++ int (*sync)(struct omap_display *display); ++ ++ int (*set_update_mode)(struct omap_display *display, ++ enum omap_dss_update_mode); ++ enum omap_dss_update_mode (*get_update_mode) ++ (struct omap_display *display); ++ ++ int (*enable_te)(struct omap_display *display, int enable); ++ int (*get_te)(struct omap_display *display); ++ ++ int (*run_test)(struct omap_display *display, int test); ++}; ++ ++int omap_dss_get_num_displays(void); ++struct omap_display *omap_dss_get_display(int no); ++void omap_dss_put_display(struct omap_display *display); ++ ++void omap_dss_register_ctrl(struct omap_ctrl *ctrl); ++void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl); ++ ++void omap_dss_register_panel(struct omap_panel *panel); ++void omap_dss_unregister_panel(struct omap_panel *panel); ++ ++int omap_dss_get_num_overlay_managers(void); ++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); ++ ++int omap_dss_get_num_overlays(void); ++struct omap_overlay *omap_dss_get_overlay(int num); ++ ++typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); ++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); ++int omap_dispc_unregister_isr(omap_dispc_isr_t isr); ++ ++#endif +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0002-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch b/packages/linux/linux-omap/0002-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch new file mode 100644 index 0000000000..0d9dba3311 --- /dev/null +++ b/packages/linux/linux-omap/0002-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch @@ -0,0 +1,3809 @@ +From 2167c1818af2d302d3934185b534ea4006c407c7 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 7 Jan 2009 14:30:18 +0200 +Subject: [PATCH] DSS: OMAPFB: fb driver for new display subsystem + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/plat-omap/Makefile | 2 +- + arch/arm/plat-omap/fb-vram.c | 646 +++++++++++++ + arch/arm/plat-omap/fb.c | 22 + + arch/arm/plat-omap/include/mach/omapfb.h | 14 + + drivers/video/Kconfig | 1 + + drivers/video/Makefile | 1 + + drivers/video/omap/Kconfig | 5 +- + drivers/video/omap2/Kconfig | 42 + + drivers/video/omap2/Makefile | 2 + + drivers/video/omap2/omapfb-ioctl.c | 464 ++++++++++ + drivers/video/omap2/omapfb-main.c | 1441 ++++++++++++++++++++++++++++++ + drivers/video/omap2/omapfb-sysfs.c | 901 +++++++++++++++++++ + drivers/video/omap2/omapfb.h | 115 +++ + 13 files changed, 3653 insertions(+), 3 deletions(-) + create mode 100644 arch/arm/plat-omap/fb-vram.c + create mode 100644 drivers/video/omap2/Kconfig + create mode 100644 drivers/video/omap2/Makefile + create mode 100644 drivers/video/omap2/omapfb-ioctl.c + create mode 100644 drivers/video/omap2/omapfb-main.c + create mode 100644 drivers/video/omap2/omapfb-sysfs.c + create mode 100644 drivers/video/omap2/omapfb.h + +diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile +index 2740497..7d602a6 100644 +--- a/arch/arm/plat-omap/Makefile ++++ b/arch/arm/plat-omap/Makefile +@@ -4,7 +4,7 @@ + + # Common support + obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ +- usb.o fb.o io.o ++ usb.o fb.o fb-vram.o io.o + obj-m := + obj-n := + obj- := +diff --git a/arch/arm/plat-omap/fb-vram.c b/arch/arm/plat-omap/fb-vram.c +new file mode 100644 +index 0000000..2994f8f +--- /dev/null ++++ b/arch/arm/plat-omap/fb-vram.c +@@ -0,0 +1,646 @@ ++/* ++ * linux/arch/arm/plat-omap/fb-vram.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++//#define DEBUG ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++ ++#ifdef DEBUG ++#define DBG(format, ...) printk(KERN_DEBUG "VRAM: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define OMAP2_SRAM_START 0x40200000 ++/* Maximum size, in reality this is smaller if SRAM is partially locked. */ ++#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */ ++ ++#define REG_MAP_SIZE(_page_cnt) \ ++ ((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8) ++#define REG_MAP_PTR(_rg, _page_nr) \ ++ (((_rg)->map) + (_page_nr) / (sizeof(unsigned long) * 8)) ++#define REG_MAP_MASK(_page_nr) \ ++ (1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1))) ++ ++#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) ++ ++/* postponed regions are used to temporarily store region information at boot ++ * time when we cannot yet allocate the region list */ ++#define MAX_POSTPONED_REGIONS 10 ++ ++static int postponed_cnt __initdata; ++static struct { ++ unsigned long paddr; ++ size_t size; ++} postponed_regions[MAX_POSTPONED_REGIONS] __initdata; ++ ++struct vram_alloc { ++ struct list_head list; ++ unsigned long paddr; ++ unsigned pages; ++}; ++ ++struct vram_region { ++ struct list_head list; ++ struct list_head alloc_list; ++ unsigned long paddr; ++ void *vaddr; ++ unsigned pages; ++ unsigned dma_alloced:1; ++}; ++ ++static DEFINE_MUTEX(region_mutex); ++static LIST_HEAD(region_list); ++ ++static inline int region_mem_type(unsigned long paddr) ++{ ++ if (paddr >= OMAP2_SRAM_START && ++ paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE) ++ return OMAPFB_MEMTYPE_SRAM; ++ else ++ return OMAPFB_MEMTYPE_SDRAM; ++} ++ ++static struct vram_region *omap_vram_create_region(unsigned long paddr, ++ void *vaddr, unsigned pages) ++{ ++ struct vram_region *rm; ++ ++ rm = kzalloc(sizeof(*rm), GFP_KERNEL); ++ ++ if (rm) { ++ INIT_LIST_HEAD(&rm->alloc_list); ++ rm->paddr = paddr; ++ rm->vaddr = vaddr; ++ rm->pages = pages; ++ } ++ ++ return rm; ++} ++ ++static void omap_vram_free_region(struct vram_region *vr) ++{ ++ list_del(&vr->list); ++ kfree(vr); ++} ++ ++static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr, ++ unsigned long paddr, unsigned pages) ++{ ++ struct vram_alloc *va; ++ struct vram_alloc *new; ++ ++ new = kzalloc(sizeof(*va), GFP_KERNEL); ++ ++ if (!new) ++ return NULL; ++ ++ new->paddr = paddr; ++ new->pages = pages; ++ ++ list_for_each_entry(va, &vr->alloc_list, list) { ++ if (va->paddr > new->paddr) ++ break; ++ } ++ ++ list_add_tail(&new->list, &va->list); ++ ++ return new; ++} ++ ++static void omap_vram_free_allocation(struct vram_alloc *va) ++{ ++ list_del(&va->list); ++ kfree(va); ++} ++ ++static __init int omap_vram_add_region_postponed(unsigned long paddr, size_t size) ++{ ++ if (postponed_cnt == MAX_POSTPONED_REGIONS) ++ return -ENOMEM; ++ ++ postponed_regions[postponed_cnt].paddr = paddr; ++ postponed_regions[postponed_cnt].size = size; ++ ++ ++postponed_cnt; ++ ++ return 0; ++} ++ ++/* add/remove_region can be exported if there's need to add/remove regions ++ * runtime */ ++static int omap_vram_add_region(unsigned long paddr, size_t size) ++{ ++ struct vram_region *rm; ++ void *vaddr; ++ unsigned pages; ++ ++ DBG("adding region paddr %08lx size %d\n", ++ paddr, size); ++ ++ size &= PAGE_MASK; ++ pages = size >> PAGE_SHIFT; ++ ++ vaddr = ioremap_wc(paddr, size); ++ if (vaddr == NULL) ++ return -ENOMEM; ++ ++ rm = omap_vram_create_region(paddr, vaddr, pages); ++ if (rm == NULL) { ++ iounmap(vaddr); ++ return -ENOMEM; ++ } ++ ++ list_add(&rm->list, ®ion_list); ++ ++ return 0; ++} ++ ++#if 0 ++int omap_vram_remove_region(unsigned long paddr) ++{ ++ struct region *rm; ++ unsigned i; ++ ++ DBG("remove region paddr %08lx\n", paddr); ++ list_for_each_entry(rm, ®ion_list, list) ++ if (rm->paddr != paddr) ++ continue; ++ ++ if (rm->paddr != paddr) ++ return -EINVAL; ++ ++ for (i = 0; i < rm->page_cnt; i++) ++ if (region_page_reserved(rm, i)) ++ return -EBUSY; ++ ++ iounmap(rm->vaddr); ++ ++ list_del(&rm->list); ++ ++ kfree(rm); ++ ++ return 0; ++} ++#endif ++ ++int omap_vram_free(unsigned long paddr, void *vaddr, size_t size) ++{ ++ struct vram_region *rm; ++ struct vram_alloc *alloc; ++ unsigned start, end; ++ ++ DBG("free mem paddr %08lx vaddr %p size %d\n", ++ paddr, vaddr, size); ++ ++ size = PAGE_ALIGN(size); ++ ++ mutex_lock(®ion_mutex); ++ ++ list_for_each_entry(rm, ®ion_list, list) { ++ list_for_each_entry(alloc, &rm->alloc_list, list) { ++ start = alloc->paddr; ++ end = alloc->paddr + (alloc->pages >> PAGE_SHIFT); ++ ++ if (start >= paddr && end < paddr + size) ++ goto found; ++ } ++ } ++ ++ mutex_unlock(®ion_mutex); ++ return -EINVAL; ++ ++found: ++ if (rm->dma_alloced) { ++ DBG("freeing dma-alloced\n"); ++ dma_free_writecombine(NULL, size, vaddr, paddr); ++ omap_vram_free_allocation(alloc); ++ omap_vram_free_region(rm); ++ } else { ++ omap_vram_free_allocation(alloc); ++ } ++ ++ mutex_unlock(®ion_mutex); ++ return 0; ++} ++EXPORT_SYMBOL(omap_vram_free); ++ ++#if 0 ++void *omap_vram_reserve(unsigned long paddr, size_t size) ++{ ++ ++ struct region *rm; ++ unsigned start_page; ++ unsigned end_page; ++ unsigned i; ++ void *vaddr; ++ ++ size = PAGE_ALIGN(size); ++ ++ rm = region_find_region(paddr, size); ++ ++ DBG("reserve mem paddr %08lx size %d\n", ++ paddr, size); ++ ++ BUG_ON(rm == NULL); ++ ++ start_page = (paddr - rm->paddr) >> PAGE_SHIFT; ++ end_page = start_page + (size >> PAGE_SHIFT); ++ for (i = start_page; i < end_page; i++) ++ region_reserve_page(rm, i); ++ ++ vaddr = rm->vaddr + (start_page << PAGE_SHIFT); ++ ++ return vaddr; ++} ++EXPORT_SYMBOL(omap_vram_reserve); ++#endif ++static void *_omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr) ++{ ++ struct vram_region *rm; ++ struct vram_alloc *alloc; ++ void *vaddr; ++ ++ list_for_each_entry(rm, ®ion_list, list) { ++ unsigned long start, end; ++ ++ DBG("checking region %lx %d\n", rm->paddr, rm->pages); ++ ++ if (region_mem_type(rm->paddr) != mtype) ++ continue; ++ ++ start = rm->paddr; ++ ++ list_for_each_entry(alloc, &rm->alloc_list, list) { ++ end = alloc->paddr; ++ ++ if (end - start >= pages << PAGE_SHIFT) ++ goto found; ++ ++ start = alloc->paddr + (alloc->pages << PAGE_SHIFT); ++ } ++ ++ end = rm->paddr + (rm->pages << PAGE_SHIFT); ++found: ++ if (end - start < pages << PAGE_SHIFT) ++ continue; ++ ++ DBG("FOUND %lx, end %lx\n", start, end); ++ ++ if (omap_vram_create_allocation(rm, start, pages) == NULL) ++ return NULL; ++ ++ *paddr = start; ++ vaddr = rm->vaddr + (start - rm->paddr); ++ ++ return vaddr; ++ } ++ ++ return NULL; ++} ++ ++static void *_omap_vram_alloc_dma(unsigned pages, unsigned long *paddr) ++{ ++ struct vram_region *rm; ++ void *vaddr; ++ ++ vaddr = dma_alloc_writecombine(NULL, pages << PAGE_SHIFT, ++ (dma_addr_t *)paddr, GFP_KERNEL); ++ ++ if (vaddr == NULL) ++ return NULL; ++ ++ rm = omap_vram_create_region(*paddr, vaddr, pages); ++ if (rm == NULL) { ++ dma_free_writecombine(NULL, pages << PAGE_SHIFT, vaddr, ++ (dma_addr_t)*paddr); ++ return NULL; ++ } ++ ++ rm->dma_alloced = 1; ++ ++ if (omap_vram_create_allocation(rm, *paddr, pages) == NULL) { ++ dma_free_writecombine(NULL, pages << PAGE_SHIFT, vaddr, ++ (dma_addr_t)*paddr); ++ kfree(rm); ++ return NULL; ++ } ++ ++ list_add(&rm->list, ®ion_list); ++ ++ return vaddr; ++} ++ ++void *omap_vram_alloc(int mtype, size_t size, unsigned long *paddr) ++{ ++ void *vaddr; ++ unsigned pages; ++ ++ BUG_ON(mtype > OMAPFB_MEMTYPE_MAX || !size); ++ ++ DBG("alloc mem type %d size %d\n", mtype, size); ++ ++ size = PAGE_ALIGN(size); ++ pages = size >> PAGE_SHIFT; ++ ++ mutex_lock(®ion_mutex); ++ ++ vaddr = _omap_vram_alloc(mtype, pages, paddr); ++ ++ if (vaddr == NULL && mtype == OMAPFB_MEMTYPE_SDRAM) { ++ DBG("fallback to dma_alloc\n"); ++ ++ vaddr = _omap_vram_alloc_dma(pages, paddr); ++ } ++ ++ mutex_unlock(®ion_mutex); ++ ++ return vaddr; ++} ++EXPORT_SYMBOL(omap_vram_alloc); ++ ++#ifdef CONFIG_PROC_FS ++static void *r_next(struct seq_file *m, void *v, loff_t *pos) ++{ ++ struct list_head *l = v; ++ ++ (*pos)++; ++ ++ if (list_is_last(l, ®ion_list)) ++ return 0; ++ ++ return l->next; ++} ++ ++static void *r_start(struct seq_file *m, loff_t *pos) ++{ ++ loff_t p = *pos; ++ struct list_head *l = ®ion_list; ++ ++ mutex_lock(®ion_mutex); ++ ++ do { ++ l = l->next; ++ if (l == ®ion_list) ++ return NULL; ++ } while (p--); ++ ++ return l; ++} ++ ++static void r_stop(struct seq_file *m, void *v) ++{ ++ mutex_unlock(®ion_mutex); ++} ++ ++static int r_show(struct seq_file *m, void *v) ++{ ++ struct vram_region *vr; ++ struct vram_alloc *va; ++ unsigned size; ++ ++ vr = list_entry(v, struct vram_region, list); ++ ++ size = vr->pages << PAGE_SHIFT; ++ seq_printf(m, "%08lx-%08lx v:%p-%p (%d bytes) %s\n", ++ vr->paddr, vr->paddr + size, ++ vr->vaddr, vr->vaddr + size, ++ size, ++ vr->dma_alloced ? "dma_alloc" : ""); ++ ++ list_for_each_entry(va, &vr->alloc_list, list) { ++ size = va->pages << PAGE_SHIFT; ++ seq_printf(m, " %08lx-%08lx (%d bytes)\n", ++ va->paddr, va->paddr + size, ++ size); ++ } ++ ++ ++ ++ return 0; ++} ++ ++static const struct seq_operations resource_op = { ++ .start = r_start, ++ .next = r_next, ++ .stop = r_stop, ++ .show = r_show, ++}; ++ ++static int vram_open(struct inode *inode, struct file *file) ++{ ++ return seq_open(file, &resource_op); ++} ++ ++static const struct file_operations proc_vram_operations = { ++ .open = vram_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = seq_release, ++}; ++ ++static int __init omap_vram_create_proc(void) ++{ ++ proc_create("omap-vram", 0, NULL, &proc_vram_operations); ++ ++ return 0; ++} ++#endif ++ ++static __init int omap_vram_init(void) ++{ ++ int i, r; ++ ++ for (i = 0; i < postponed_cnt; i++) ++ omap_vram_add_region(postponed_regions[i].paddr, ++ postponed_regions[i].size); ++ ++#ifdef CONFIG_PROC_FS ++ r = omap_vram_create_proc(); ++ if (r) ++ return -ENOMEM; ++#endif ++ ++ return 0; ++} ++ ++arch_initcall(omap_vram_init); ++ ++/* boottime vram alloc stuff */ ++static u32 omapfb_sram_vram_start __initdata; ++static u32 omapfb_sram_vram_size __initdata; ++ ++static u32 omapfb_sdram_vram_start __initdata; ++static u32 omapfb_sdram_vram_size __initdata; ++ ++static u32 omapfb_def_sdram_vram_size __initdata; ++ ++static void __init omapfb_early_vram(char **p) ++{ ++ unsigned long size; ++ size = memparse(*p, p); ++ omapfb_def_sdram_vram_size = size; ++} ++__early_param("vram=", omapfb_early_vram); ++ ++/* ++ * Called from map_io. We need to call to this early enough so that we ++ * can reserve the fixed SDRAM regions before VM could get hold of them. ++ */ ++void __init omapfb_reserve_sdram(void) ++{ ++ struct bootmem_data *bdata; ++ unsigned long sdram_start, sdram_size; ++ unsigned long reserved; ++ u32 paddr; ++ u32 size; ++ ++ bdata = NODE_DATA(0)->bdata; ++ sdram_start = bdata->node_min_pfn << PAGE_SHIFT; ++ sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; ++ reserved = 0; ++ ++ /* cmdline arg overrides the board file definition */ ++ if (omapfb_def_sdram_vram_size) { ++ size = omapfb_def_sdram_vram_size; ++ paddr = 0; ++ } else { ++ size = omapfb_sdram_vram_size; ++ paddr = omapfb_sdram_vram_start; ++ } ++ ++ if (size) { ++ if (paddr) { ++ if (paddr < sdram_start || ++ paddr + size > sdram_start + sdram_size) { ++ printk(KERN_ERR "Illegal SDRAM region for VRAM\n"); ++ return; ++ } ++ ++ reserve_bootmem(paddr, size, BOOTMEM_DEFAULT); ++ } else { ++ if (size > sdram_size) { ++ printk(KERN_ERR "Illegal SDRAM size for VRAM\n"); ++ return; ++ } ++ ++ paddr = virt_to_phys(alloc_bootmem(size)); ++ } ++ ++ reserved += size; ++ omap_vram_add_region_postponed(paddr, size); ++ } ++ ++ if (reserved) ++ pr_info("Reserving %lu bytes SDRAM for VRAM\n", reserved); ++} ++ ++/* ++ * Called at sram init time, before anything is pushed to the SRAM stack. ++ * Because of the stack scheme, we will allocate everything from the ++ * start of the lowest address region to the end of SRAM. This will also ++ * include padding for page alignment and possible holes between regions. ++ * ++ * As opposed to the SDRAM case, we'll also do any dynamic allocations at ++ * this point, since the driver built as a module would have problem with ++ * freeing / reallocating the regions. ++ */ ++unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, ++ unsigned long sram_vstart, ++ unsigned long sram_size, ++ unsigned long pstart_avail, ++ unsigned long size_avail) ++{ ++ unsigned long pend_avail; ++ unsigned long reserved; ++ u32 paddr; ++ u32 size; ++ ++ paddr = omapfb_sram_vram_start; ++ size = omapfb_sram_vram_size; ++ ++ reserved = 0; ++ pend_avail = pstart_avail + size_avail; ++ ++ ++ if (!paddr) { ++ /* Dynamic allocation */ ++ if ((size_avail & PAGE_MASK) < size) { ++ printk(KERN_ERR "Not enough SRAM for VRAM\n"); ++ return 0; ++ } ++ size_avail = (size_avail - size) & PAGE_MASK; ++ paddr = pstart_avail + size_avail; ++ } ++ ++ if (paddr < sram_pstart || ++ paddr + size > sram_pstart + sram_size) { ++ printk(KERN_ERR "Illegal SRAM region for VRAM\n"); ++ return 0; ++ } ++ ++ /* Reserve everything above the start of the region. */ ++ if (pend_avail - paddr > reserved) ++ reserved = pend_avail - paddr; ++ size_avail = pend_avail - reserved - pstart_avail; ++ ++ /* ++ * We have a kernel mapping for this already, so the ++ * driver won't have to make one. ++ */ ++ /* XXX do we need the vaddr? */ ++ /* rg.vaddr = (void *)(sram_vstart + paddr - sram_pstart); */ ++ ++ omap_vram_add_region_postponed(paddr, size); ++ ++ if (reserved) ++ pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved); ++ ++ return reserved; ++} ++ ++void __init omap2_set_sdram_vram(u32 size, u32 start) ++{ ++ omapfb_sdram_vram_start = start; ++ omapfb_sdram_vram_size = size; ++} ++ ++void __init omap2_set_sram_vram(u32 size, u32 start) ++{ ++ omapfb_sram_vram_start = start; ++ omapfb_sram_vram_size = size; ++} ++ ++#endif ++ +diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c +index 3746222..ee2cc6f 100644 +--- a/arch/arm/plat-omap/fb.c ++++ b/arch/arm/plat-omap/fb.c +@@ -327,6 +327,28 @@ static inline int omap_init_fb(void) + + arch_initcall(omap_init_fb); + ++#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) ++ ++static u64 omap_fb_dma_mask = ~(u32)0; ++ ++static struct platform_device omap_fb_device = { ++ .name = "omapfb", ++ .id = -1, ++ .dev = { ++ .dma_mask = &omap_fb_dma_mask, ++ .coherent_dma_mask = ~(u32)0, ++ .platform_data = NULL, ++ }, ++ .num_resources = 0, ++}; ++ ++static inline int omap_init_fb(void) ++{ ++ return platform_device_register(&omap_fb_device); ++} ++ ++arch_initcall(omap_init_fb); ++ + #else + + void omapfb_reserve_sdram(void) {} +diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h +index b226bdf..0800f92 100644 +--- a/arch/arm/plat-omap/include/mach/omapfb.h ++++ b/arch/arm/plat-omap/include/mach/omapfb.h +@@ -90,6 +90,13 @@ enum omapfb_color_format { + OMAPFB_COLOR_CLUT_1BPP, + OMAPFB_COLOR_RGB444, + OMAPFB_COLOR_YUY422, ++ ++ OMAPFB_COLOR_ARGB16, ++ OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ ++ OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ ++ OMAPFB_COLOR_ARGB32, ++ OMAPFB_COLOR_RGBA32, ++ OMAPFB_COLOR_RGBX32, + }; + + struct omapfb_update_window { +@@ -393,6 +400,13 @@ extern int omapfb_update_window_async(struct fb_info *fbi, + /* in arch/arm/plat-omap/fb.c */ + extern void omapfb_set_ctrl_platform_data(void *pdata); + ++/* in arch/arm/plat-omap/fb-vram */ ++int omap_vram_free(unsigned long paddr, void *vaddr, size_t size); ++void *omap_vram_reserve(unsigned long paddr, size_t size); ++void *omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); ++extern void omap2_set_sdram_vram(u32 size, u32 start); ++extern void omap2_set_sram_vram(u32 size, u32 start); ++ + #endif /* __KERNEL__ */ + + #endif /* __OMAPFB_H */ +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index 3f3ce13..689a3b1 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -2116,6 +2116,7 @@ config FB_PRE_INIT_FB + the bootloader. + + source "drivers/video/omap/Kconfig" ++source "drivers/video/omap2/Kconfig" + + source "drivers/video/backlight/Kconfig" + source "drivers/video/display/Kconfig" +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index e39e33e..3d9d50e 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -120,6 +120,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o + obj-$(CONFIG_FB_XILINX) += xilinxfb.o + obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o + obj-$(CONFIG_FB_OMAP) += omap/ ++obj-$(CONFIG_OMAP2_DSS) += omap2/ + obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o + obj-$(CONFIG_FB_CARMINE) += carminefb.o + obj-$(CONFIG_FB_MB862XX) += mb862xx/ +diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig +index c355b59..541fab3 100644 +--- a/drivers/video/omap/Kconfig ++++ b/drivers/video/omap/Kconfig +@@ -1,6 +1,7 @@ + config FB_OMAP + tristate "OMAP frame buffer support (EXPERIMENTAL)" +- depends on FB && ARCH_OMAP ++ depends on FB && ARCH_OMAP && (OMAP2_DSS = "n") ++ + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -80,7 +81,7 @@ config FB_OMAP_BOOTLOADER_INIT + + config FB_OMAP_CONSISTENT_DMA_SIZE + int "Consistent DMA memory size (MB)" +- depends on FB_OMAP ++ depends on FB && ARCH_OMAP + range 1 14 + default 2 + help +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +new file mode 100644 +index 0000000..8be51a3 +--- /dev/null ++++ b/drivers/video/omap2/Kconfig +@@ -0,0 +1,42 @@ ++config FB_OMAP2 ++ tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" ++ depends on FB && OMAP2_DSS ++ ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Frame buffer driver for OMAP2/3 based boards. ++ ++config FB_OMAP2_DEBUG ++ bool "Debug support for OMAP2/3 FB" ++ default y ++ depends on FB_OMAP2 ++ help ++ Support for debug output. You have to enable the actual printing ++ with debug module parameter. ++ ++config FB_OMAP2_FORCE_AUTO_UPDATE ++ bool "Force main display to automatic update mode" ++ depends on FB_OMAP2 ++ help ++ Forces main display to automatic update mode (if possible), ++ and also enables tearsync (if possible). By default ++ displays that support manual update are started in manual ++ update mode. ++ ++config FB_OMAP2_NUM_FBS ++ int "Number of framebuffers" ++ range 1 10 ++ default 3 ++ depends on FB_OMAP2 ++ help ++ Select the number of framebuffers created. OMAP2/3 has 3 overlays ++ so normally this would be 3. ++ ++menu "OMAP2/3 Display Device Drivers" ++ depends on OMAP2_DSS ++ ++ ++endmenu ++ +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +new file mode 100644 +index 0000000..51c2e00 +--- /dev/null ++++ b/drivers/video/omap2/Makefile +@@ -0,0 +1,2 @@ ++obj-$(CONFIG_FB_OMAP2) += omapfb.o ++omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o +diff --git a/drivers/video/omap2/omapfb-ioctl.c b/drivers/video/omap2/omapfb-ioctl.c +new file mode 100644 +index 0000000..1f0f044 +--- /dev/null ++++ b/drivers/video/omap2/omapfb-ioctl.c +@@ -0,0 +1,464 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-ioctl.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "omapfb.h" ++ ++static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ struct omap_overlay *ovl; ++ int r = 0; ++ ++ DBG("omapfb_setup_plane\n"); ++ ++ omapfb_lock(fbdev); ++ ++ if (ofbi->num_overlays != 1) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ /* XXX uses only the first overlay */ ++ ovl = ofbi->overlays[0]; ++ ++ if (pi->enabled && !ofbi->region.size) { ++ /* ++ * This plane's memory was freed, can't enable it ++ * until it's reallocated. ++ */ ++ r = -EINVAL; ++ goto out; ++ } ++ ++ if (pi->enabled) { ++ r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y, ++ pi->out_width, pi->out_height); ++ if (r) ++ goto out; ++ } ++ ++ r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y, ++ pi->out_width, pi->out_height); ++ if (r) ++ goto out; ++ ++ ovl->enable(ovl, pi->enabled); ++ ++ if (ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ ++ if (display) { ++ if (display->sync) ++ display->sync(display); ++ ++ if (display->update) ++ display->update(display, 0, 0, ++ display->panel->timings.x_res, ++ display->panel->timings.y_res); ++ } ++ ++out: ++ omapfb_unlock(fbdev); ++ if (r) ++ dev_err(fbdev->dev, "setup_plane failed\n"); ++ return r; ++} ++ ++static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ ++ omapfb_lock(fbdev); ++ ++ if (ofbi->num_overlays != 1) { ++ memset(pi, 0, sizeof(*pi)); ++ } else { ++ struct omap_overlay_info *ovli; ++ struct omap_overlay *ovl; ++ ++ ovl = ofbi->overlays[0]; ++ ovli = &ovl->info; ++ ++ pi->pos_x = ovli->pos_x; ++ pi->pos_y = ovli->pos_y; ++ pi->enabled = ovli->enabled; ++ pi->channel_out = 0; /* xxx */ ++ pi->mirror = 0; ++ pi->out_width = ovli->out_width; ++ pi->out_height = ovli->out_height; ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb_mem_region *rg; ++ struct omap_display *display = fb2display(fbi); ++ int r, i; ++ size_t size; ++ ++ if (mi->type > OMAPFB_MEMTYPE_MAX) ++ return -EINVAL; ++ ++ size = PAGE_ALIGN(mi->size); ++ ++ rg = &ofbi->region; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->info.enabled) { ++ r = -EBUSY; ++ goto out; ++ } ++ } ++ ++ if (rg->size != size || rg->type != mi->type) { ++ struct fb_var_screeninfo new_var; ++ unsigned long old_size = rg->size; ++ ++ if (display->sync) ++ display->sync(display); ++ ++ r = omapfb_realloc_fbmem(fbdev, ofbi->id, size); ++ if (r) ++ goto out; ++ ++ if (old_size != size) { ++ if (size) { ++ memcpy(&new_var, &fbi->var, sizeof(new_var)); ++ r = check_fb_var(fbi, &new_var); ++ if (r < 0) ++ goto out; ++ memcpy(&fbi->var, &new_var, sizeof(fbi->var)); ++ set_fb_fix(fbi); ++ } else { ++ /* ++ * Set these explicitly to indicate that the ++ * plane memory is dealloce'd, the other ++ * screen parameters in var / fix are invalid. ++ */ ++ fbi->fix.smem_start = 0; ++ fbi->fix.smem_len = 0; ++ } ++ } ++ } ++ ++ r = 0; ++out: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb_mem_region *rg; ++ ++ rg = &ofbi->region; ++ memset(mi, 0, sizeof(*mi)); ++ ++ omapfb_lock(fbdev); ++ mi->size = rg->size; ++ mi->type = rg->type; ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_update_window(struct fb_info *fbi, ++ u32 x, u32 y, u32 w, u32 h) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ ++ if (!display) ++ return 0; ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ if (x + w > display->panel->timings.x_res || ++ y + h > display->panel->timings.y_res) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ display->update(display, x, y, w, h); ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_set_update_mode(struct fb_info *fbi, ++ enum omapfb_update_mode mode) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ enum omap_dss_update_mode um; ++ int r; ++ ++ if (!display || !display->set_update_mode) ++ return -EINVAL; ++ ++ switch (mode) { ++ case OMAPFB_UPDATE_DISABLED: ++ um = OMAP_DSS_UPDATE_DISABLED; ++ break; ++ ++ case OMAPFB_AUTO_UPDATE: ++ um = OMAP_DSS_UPDATE_AUTO; ++ break; ++ ++ case OMAPFB_MANUAL_UPDATE: ++ um = OMAP_DSS_UPDATE_MANUAL; ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ omapfb_lock(fbdev); ++ r = display->set_update_mode(display, um); ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_get_update_mode(struct fb_info *fbi, ++ enum omapfb_update_mode *mode) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ enum omap_dss_update_mode m; ++ ++ if (!display || !display->get_update_mode) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ m = display->get_update_mode(display); ++ omapfb_unlock(fbdev); ++ ++ switch (m) { ++ case OMAP_DSS_UPDATE_DISABLED: ++ *mode = OMAPFB_UPDATE_DISABLED; ++ break; ++ case OMAP_DSS_UPDATE_AUTO: ++ *mode = OMAPFB_AUTO_UPDATE; ++ break; ++ case OMAP_DSS_UPDATE_MANUAL: ++ *mode = OMAPFB_MANUAL_UPDATE; ++ break; ++ default: ++ BUG(); ++ } ++ ++ return 0; ++} ++ ++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ ++ union { ++ struct omapfb_update_window_old uwnd_o; ++ struct omapfb_update_window uwnd; ++ struct omapfb_plane_info plane_info; ++ struct omapfb_caps caps; ++ struct omapfb_mem_info mem_info; ++ enum omapfb_update_mode update_mode; ++ int test_num; ++ } p; ++ ++ int r = 0; ++ ++ DBG("ioctl %x (%d)\n", cmd, cmd & 0xff); ++ ++ switch (cmd) { ++ case OMAPFB_SYNC_GFX: ++ if (!display || !display->sync) { ++ r = -EINVAL; ++ break; ++ } ++ ++ omapfb_lock(fbdev); ++ r = display->sync(display); ++ omapfb_unlock(fbdev); ++ break; ++ ++ case OMAPFB_UPDATE_WINDOW_OLD: ++ if (!display || !display->update) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (copy_from_user(&p.uwnd_o, ++ (void __user *)arg, ++ sizeof(p.uwnd_o))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y, ++ p.uwnd_o.width, p.uwnd_o.height); ++ break; ++ ++ case OMAPFB_UPDATE_WINDOW: ++ if (!display || !display->update) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (copy_from_user(&p.uwnd, (void __user *)arg, ++ sizeof(p.uwnd))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y, ++ p.uwnd.width, p.uwnd.height); ++ break; ++ ++ case OMAPFB_SETUP_PLANE: ++ if (copy_from_user(&p.plane_info, (void __user *)arg, ++ sizeof(p.plane_info))) ++ r = -EFAULT; ++ else ++ r = omapfb_setup_plane(fbi, &p.plane_info); ++ break; ++ ++ case OMAPFB_QUERY_PLANE: ++ r = omapfb_query_plane(fbi, &p.plane_info); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.plane_info, ++ sizeof(p.plane_info))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SETUP_MEM: ++ if (copy_from_user(&p.mem_info, (void __user *)arg, ++ sizeof(p.mem_info))) ++ r = -EFAULT; ++ else ++ r = omapfb_setup_mem(fbi, &p.mem_info); ++ break; ++ ++ case OMAPFB_QUERY_MEM: ++ r = omapfb_query_mem(fbi, &p.mem_info); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.mem_info, ++ sizeof(p.mem_info))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_GET_CAPS: ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ p.caps.ctrl = display->caps; ++ ++ if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SET_UPDATE_MODE: ++ if (get_user(p.update_mode, (int __user *)arg)) ++ r = -EFAULT; ++ else ++ r = omapfb_set_update_mode(fbi, p.update_mode); ++ break; ++ ++ case OMAPFB_GET_UPDATE_MODE: ++ r = omapfb_get_update_mode(fbi, &p.update_mode); ++ if (r) ++ break; ++ if (put_user(p.update_mode, ++ (enum omapfb_update_mode __user *)arg)) ++ r = -EFAULT; ++ break; ++ ++ /* LCD and CTRL tests do the same thing for backward ++ * compatibility */ ++ case OMAPFB_LCD_TEST: ++ if (get_user(p.test_num, (int __user *)arg)) { ++ r = -EFAULT; ++ break; ++ } ++ if (!display || !display->run_test) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->run_test(display, p.test_num); ++ ++ break; ++ ++ case OMAPFB_CTRL_TEST: ++ if (get_user(p.test_num, (int __user *)arg)) { ++ r = -EFAULT; ++ break; ++ } ++ if (!display || !display->run_test) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->run_test(display, p.test_num); ++ ++ break; ++ ++ default: ++ DBG("ioctl unhandled\n"); ++ r = -EINVAL; ++ } ++ ++ return r; ++} ++ ++ +diff --git a/drivers/video/omap2/omapfb-main.c b/drivers/video/omap2/omapfb-main.c +new file mode 100644 +index 0000000..76bd416 +--- /dev/null ++++ b/drivers/video/omap2/omapfb-main.c +@@ -0,0 +1,1441 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-main.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "omapfb.h" ++ ++#define MODULE_NAME "omapfb" ++ ++static char *def_mode; ++static char *def_vram; ++ ++#ifdef DEBUG ++unsigned int omapfb_debug; ++module_param_named(debug, omapfb_debug, bool, 0644); ++#endif ++ ++#ifdef DEBUG ++static void fill_fb(void *addr, struct fb_info *fbi) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ ++ const short w = var->xres_virtual; ++ const short h = var->yres_virtual; ++ ++ int y, x; ++ u8 *p = addr; ++ ++ for (y = 0; y < h; y++) { ++ for (x = 0; x < w; x++) { ++ if (var->bits_per_pixel == 16) { ++ u16 *pw = (u16 *)p; ++ ++ if (x < 20 && y < 20) ++ *pw = 0xffff; ++ else if (x == 20 || x == w - 20 || ++ y == 20 || y == h - 20) ++ *pw = 0xffff; ++ else if (x == y || w - x == h - y) ++ *pw = ((1<<5)-1)<<11; ++ else if (w - x == y || x == h - y) ++ *pw = ((1<<6)-1)<<5; ++ else { ++ int t = x / (w/3); ++ if (t == 0) ++ *pw = y % 32; ++ else if (t == 1) ++ *pw = (y % 64) << 5; ++ else if (t == 2) ++ *pw = (y % 32) << 11; ++ } ++ } else if (var->bits_per_pixel == 24) { ++ u8 *pb = (u8 *)p; ++ ++ int r = 0, g = 0, b = 0; ++ ++ if (x < 20 && y < 20) ++ r = g = b = 0xff; ++ else if (x == 20 || x == w - 20 || ++ y == 20 || y == h - 20) ++ r = g = b = 0xff; ++ else if (x == y || w - x == h - y) ++ r = 0xff; ++ else if (w - x == y || x == h - y) ++ g = 0xff; ++ else { ++ int q = x / (w / 3); ++ u8 base = 255 - (y % 256); ++ if (q == 0) ++ r = base; ++ else if (q == 1) ++ g = base; ++ else if (q == 2) ++ b = base; ++ } ++ ++ pb[0] = b; ++ pb[1] = g; ++ pb[2] = r; ++ ++ } else if (var->bits_per_pixel == 32) { ++ u32 *pd = (u32 *)p; ++ ++ if (x < 20 && y < 20) ++ *pd = 0xffffff; ++ else if (x == 20 || x == w - 20 || ++ y == 20 || y == h - 20) ++ *pd = 0xffffff; ++ else if (x == y || w - x == h - y) ++ *pd = 0xff0000; ++ else if (w - x == y || x == h - y) ++ *pd = 0x00ff00; ++ else { ++ u8 base = 255 - (y % 256); ++ *pd = base << ((x / (w/3)) << 3); ++ } ++ } ++ ++ p += var->bits_per_pixel >> 3; ++ } ++ } ++} ++#endif ++ ++static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var) ++{ ++ switch (var->nonstd) { ++ case 0: ++ break; ++ case OMAPFB_COLOR_YUV422: ++ return OMAP_DSS_COLOR_UYVY; ++ ++ case OMAPFB_COLOR_YUY422: ++ return OMAP_DSS_COLOR_YUV2; ++ ++ case OMAPFB_COLOR_ARGB16: ++ return OMAP_DSS_COLOR_ARGB16; ++ ++ case OMAPFB_COLOR_ARGB32: ++ return OMAP_DSS_COLOR_ARGB32; ++ ++ case OMAPFB_COLOR_RGBA32: ++ return OMAP_DSS_COLOR_RGBA32; ++ ++ case OMAPFB_COLOR_RGBX32: ++ return OMAP_DSS_COLOR_RGBX32; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ switch (var->bits_per_pixel) { ++ case 1: ++ return OMAP_DSS_COLOR_CLUT1; ++ case 2: ++ return OMAP_DSS_COLOR_CLUT2; ++ case 4: ++ return OMAP_DSS_COLOR_CLUT4; ++ case 8: ++ return OMAP_DSS_COLOR_CLUT8; ++ case 12: ++ return OMAP_DSS_COLOR_RGB12U; ++ case 16: ++ return OMAP_DSS_COLOR_RGB16; ++ case 24: ++ return OMAP_DSS_COLOR_RGB24P; ++ case 32: ++ return OMAP_DSS_COLOR_RGB24U; ++ default: ++ return -EINVAL; ++ } ++ ++ return -EINVAL; ++} ++ ++void set_fb_fix(struct fb_info *fbi) ++{ ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct omapfb_mem_region *rg = &FB2OFB(fbi)->region; ++ ++ DBG("set_fb_fix\n"); ++ ++ /* used by open/write in fbmem.c */ ++ fbi->screen_base = (char __iomem *)rg->vaddr; ++ ++ /* used by mmap in fbmem.c */ ++ fix->smem_start = rg->paddr; ++ fix->smem_len = rg->size; ++ ++ fix->type = FB_TYPE_PACKED_PIXELS; ++ ++ if (var->nonstd) ++ fix->visual = FB_VISUAL_PSEUDOCOLOR; ++ else { ++ switch (var->bits_per_pixel) { ++ case 32: ++ case 24: ++ case 16: ++ case 12: ++ fix->visual = FB_VISUAL_TRUECOLOR; ++ /* 12bpp is stored in 16 bits */ ++ break; ++ case 1: ++ case 2: ++ case 4: ++ case 8: ++ fix->visual = FB_VISUAL_PSEUDOCOLOR; ++ break; ++ } ++ } ++ ++ fix->accel = FB_ACCEL_NONE; ++ fix->line_length = (var->xres_virtual * var->bits_per_pixel) >> 3; ++ ++ fix->xpanstep = 1; ++ fix->ypanstep = 1; ++} ++ ++/* check new var and possibly modify it to be ok */ ++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omap_display *display = fb2display(fbi); ++ unsigned long max_frame_size; ++ unsigned long line_size; ++ int xres_min, xres_max; ++ int yres_min, yres_max; ++ enum omap_color_mode mode = 0; ++ struct omap_overlay *ovl; ++ ++ DBG("check_fb_var %d\n", ofbi->id); ++ ++ if (ofbi->region.size == 0) { ++ memset(var, 0, sizeof(*var)); ++ return 0; ++ } ++ ++ if (ofbi->num_overlays == 0) { ++ dev_err(ofbi->fbdev->dev, "no overlays, aborting\n"); ++ return -EINVAL; ++ } ++ ++ /* XXX: uses the first overlay */ ++ ovl = ofbi->overlays[0]; ++ ++ /* if we are using non standard mode, fix the bpp first */ ++ switch (var->nonstd) { ++ case 0: ++ break; ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUY422: ++ case OMAPFB_COLOR_ARGB16: ++ var->bits_per_pixel = 16; ++ break; ++ case OMAPFB_COLOR_ARGB32: ++ case OMAPFB_COLOR_RGBA32: ++ case OMAPFB_COLOR_RGBX32: ++ var->bits_per_pixel = 32; ++ break; ++ default: ++ DBG("invalid nonstd mode\n"); ++ return -EINVAL; ++ } ++ ++ mode = fb_mode_to_dss_mode(var); ++ if (mode < 0) { ++ DBG("cannot convert var to omap dss mode\n"); ++ return -EINVAL; ++ } ++ ++ if ((ovl->supported_modes & mode) == 0) { ++ DBG("invalid mode\n"); ++ return -EINVAL; ++ } ++ ++ xres_min = OMAPFB_PLANE_XRES_MIN; ++ xres_max = (display ? display->panel->timings.x_res : 2048) - ovl->info.pos_x; ++ yres_min = OMAPFB_PLANE_YRES_MIN; ++ yres_max = (display ? display->panel->timings.y_res : 2048) - ovl->info.pos_y; ++ ++ if (var->xres < xres_min) ++ var->xres = xres_min; ++ if (var->yres < yres_min) ++ var->yres = yres_min; ++ if (var->xres_virtual < var->xres) ++ var->xres_virtual = var->xres; ++ if (var->yres_virtual < var->yres) ++ var->yres_virtual = var->yres; ++ max_frame_size = ofbi->region.size; ++ line_size = (var->xres_virtual * var->bits_per_pixel) >> 3; ++ ++ if (line_size * var->yres_virtual > max_frame_size) { ++ /* Try to keep yres_virtual first */ ++ line_size = max_frame_size / var->yres_virtual; ++ var->xres_virtual = line_size * 8 / var->bits_per_pixel; ++ if (var->xres_virtual < var->xres) { ++ /* Still doesn't fit. Shrink yres_virtual too */ ++ var->xres_virtual = var->xres; ++ line_size = var->xres * var->bits_per_pixel / 8; ++ var->yres_virtual = max_frame_size / line_size; ++ } ++ /* Recheck this, as the virtual size changed. */ ++ if (var->xres_virtual < var->xres) ++ var->xres = var->xres_virtual; ++ if (var->yres_virtual < var->yres) ++ var->yres = var->yres_virtual; ++ if (var->xres < xres_min || var->yres < yres_min) { ++ DBG("Cannot fit FB to memory\n"); ++ return -EINVAL; ++ } ++ } ++ if (var->xres + var->xoffset > var->xres_virtual) ++ var->xoffset = var->xres_virtual - var->xres; ++ if (var->yres + var->yoffset > var->yres_virtual) ++ var->yoffset = var->yres_virtual - var->yres; ++ ++ if (var->bits_per_pixel == 16) { ++ var->red.offset = 11; var->red.length = 5; ++ var->red.msb_right = 0; ++ var->green.offset = 5; var->green.length = 6; ++ var->green.msb_right = 0; ++ var->blue.offset = 0; var->blue.length = 5; ++ var->blue.msb_right = 0; ++ } else if (var->bits_per_pixel == 24) { ++ var->red.offset = 16; var->red.length = 8; ++ var->red.msb_right = 0; ++ var->green.offset = 8; var->green.length = 8; ++ var->green.msb_right = 0; ++ var->blue.offset = 0; var->blue.length = 8; ++ var->blue.msb_right = 0; ++ var->transp.offset = 0; var->transp.length = 0; ++ } else if (var->bits_per_pixel == 32) { ++ var->red.offset = 16; var->red.length = 8; ++ var->red.msb_right = 0; ++ var->green.offset = 8; var->green.length = 8; ++ var->green.msb_right = 0; ++ var->blue.offset = 0; var->blue.length = 8; ++ var->blue.msb_right = 0; ++ var->transp.offset = 0; var->transp.length = 0; ++ } else { ++ DBG("failed to setup fb color mask\n"); ++ return -EINVAL; ++ } ++ ++ DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n", ++ var->xres, var->yres, ++ var->xres_virtual, var->yres_virtual); ++ ++ var->height = -1; ++ var->width = -1; ++ var->grayscale = 0; ++ ++ if (display && display->get_timings) { ++ struct omap_video_timings timings; ++ display->get_timings(display, &timings); ++ ++ /* pixclock in ps, the rest in pixclock */ ++ var->pixclock = timings.pixel_clock != 0 ? ++ KHZ2PICOS(timings.pixel_clock) : ++ 0; ++ var->left_margin = timings.hfp; ++ var->right_margin = timings.hbp; ++ var->upper_margin = timings.vfp; ++ var->lower_margin = timings.vbp; ++ var->hsync_len = timings.hsw; ++ var->vsync_len = timings.vsw; ++ } else { ++ var->pixclock = 0; ++ var->left_margin = 0; ++ var->right_margin = 0; ++ var->upper_margin = 0; ++ var->lower_margin = 0; ++ var->hsync_len = 0; ++ var->vsync_len = 0; ++ } ++ ++ /* TODO: get these from panel->config */ ++ var->vmode = FB_VMODE_NONINTERLACED; ++ var->sync = 0; ++ ++ return 0; ++} ++ ++/* ++ * --------------------------------------------------------------------------- ++ * fbdev framework callbacks ++ * --------------------------------------------------------------------------- ++ */ ++static int omapfb_open(struct fb_info *fbi, int user) ++{ ++ return 0; ++} ++ ++static int omapfb_release(struct fb_info *fbi, int user) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ ++ DBG("Closing fb with plane index %d\n", ofbi->id); ++ ++ omapfb_lock(fbdev); ++#if 1 ++ if (display) { ++ /* XXX Is this really needed ? */ ++ if (display->sync) ++ display->sync(display); ++ ++ if (display->update) ++ display->update(display, ++ 0, 0, ++ display->panel->timings.x_res, ++ display->panel->timings.y_res); ++ } ++#endif ++ ++ if (display && display->sync) ++ display->sync(display); ++ ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++/* setup overlay according to the fb */ ++int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, ++ int posx, int posy, int outw, int outh) ++{ ++ int r = 0; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_var_screeninfo *var = &fbi->var; ++ enum omap_color_mode mode = 0; ++ int offset; ++ u32 data_start_p; ++ void *data_start_v; ++ ++ DBG("setup_overlay %d\n", ofbi->id); ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 && ++ (outw != var->xres || outh != var->yres)) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ offset = ((var->yoffset * var->xres_virtual + ++ var->xoffset) * var->bits_per_pixel) >> 3; ++ ++ data_start_p = ofbi->region.paddr + offset; ++ data_start_v = ofbi->region.vaddr + offset; ++ ++ mode = fb_mode_to_dss_mode(var); ++ ++ if (mode == -EINVAL) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ r = ovl->setup_input(ovl, ++ data_start_p, data_start_v, ++ var->xres_virtual, ++ var->xres, var->yres, ++ mode); ++ ++ if (r) ++ goto err; ++ ++ r = ovl->setup_output(ovl, ++ posx, posy, ++ outw, outh); ++ ++ if (r) ++ goto err; ++ ++ return 0; ++ ++err: ++ DBG("setup_overlay failed\n"); ++ return r; ++} ++ ++/* apply var to the overlay */ ++int omapfb_apply_changes(struct fb_info *fbi, int init) ++{ ++ int r = 0; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct omap_overlay *ovl; ++ int posx, posy; ++ int outw, outh; ++ int i; ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ ovl = ofbi->overlays[i]; ++ ++ DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); ++ ++ if (ofbi->region.size == 0) { ++ /* the fb is not available. disable the overlay */ ++ ovl->enable(ovl, 0); ++ if (!init && ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ continue; ++ } ++ ++ if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { ++ outw = var->xres; ++ outh = var->yres; ++ } else { ++ outw = ovl->info.out_width; ++ outh = ovl->info.out_height; ++ } ++ ++ if (init) { ++ posx = 0; ++ posy = 0; ++ } else { ++ posx = ovl->info.pos_x; ++ posy = ovl->info.pos_y; ++ } ++ ++ r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh); ++ if (r) ++ goto err; ++ ++ if (!init && ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ } ++ return 0; ++err: ++ DBG("apply_changes failed\n"); ++ return r; ++} ++ ++/* checks var and eventually tweaks it to something supported, ++ * DO NOT MODIFY PAR */ ++static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) ++{ ++ int r; ++ ++ DBG("check_var(%d)\n", FB2OFB(fbi)->id); ++ ++ r = check_fb_var(fbi, var); ++ ++ return r; ++} ++ ++/* set the video mode according to info->var */ ++static int omapfb_set_par(struct fb_info *fbi) ++{ ++ int r; ++ ++ DBG("set_par(%d)\n", FB2OFB(fbi)->id); ++ ++ set_fb_fix(fbi); ++ r = omapfb_apply_changes(fbi, 0); ++ ++ return r; ++} ++ ++static void omapfb_rotate(struct fb_info *fbi, int rotate) ++{ ++ DBG("rotate(%d)\n", FB2OFB(fbi)->id); ++ return; ++} ++ ++static int omapfb_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ int r = 0; ++ ++ DBG("pan_display(%d)\n", ofbi->id); ++ ++ omapfb_lock(fbdev); ++ ++ if (var->xoffset != fbi->var.xoffset || ++ var->yoffset != fbi->var.yoffset) { ++ struct fb_var_screeninfo new_var; ++ ++ new_var = fbi->var; ++ new_var.xoffset = var->xoffset; ++ new_var.yoffset = var->yoffset; ++ ++ r = check_fb_var(fbi, &new_var); ++ ++ if (r == 0) { ++ fbi->var = new_var; ++ set_fb_fix(fbi); ++ r = omapfb_apply_changes(fbi, 0); ++ } ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static void mmap_user_open(struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; ++ ++ atomic_inc(&ofbi->map_count); ++} ++ ++static void mmap_user_close(struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; ++ ++ atomic_dec(&ofbi->map_count); ++} ++ ++static struct vm_operations_struct mmap_user_ops = { ++ .open = mmap_user_open, ++ .close = mmap_user_close, ++}; ++ ++static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb_mem_region *rg = &ofbi->region; ++ unsigned long off; ++ unsigned long start; ++ u32 len; ++ ++ if (vma->vm_end - vma->vm_start == 0) ++ return 0; ++ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) ++ return -EINVAL; ++ off = vma->vm_pgoff << PAGE_SHIFT; ++ ++ start = rg->paddr; ++ len = rg->size; ++ if (off >= len) ++ return -EINVAL; ++ if ((vma->vm_end - vma->vm_start + off) > len) ++ return -EINVAL; ++ off += start; ++ vma->vm_pgoff = off >> PAGE_SHIFT; ++ vma->vm_flags |= VM_IO | VM_RESERVED; ++ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); ++ vma->vm_ops = &mmap_user_ops; ++ vma->vm_private_data = ofbi; ++ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, ++ vma->vm_end - vma->vm_start, vma->vm_page_prot)) ++ return -EAGAIN; ++ /* vm_ops.open won't be called for mmap itself. */ ++ atomic_inc(&ofbi->map_count); ++ return 0; ++} ++ ++/* Store a single color palette entry into a pseudo palette or the hardware ++ * palette if one is available. For now we support only 16bpp and thus store ++ * the entry only to the pseudo palette. ++ */ ++static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, ++ u_int blue, u_int transp, int update_hw_pal) ++{ ++ /*struct omapfb_info *ofbi = FB2OFB(fbi);*/ ++ /*struct omapfb2_device *fbdev = ofbi->fbdev;*/ ++ struct fb_var_screeninfo *var = &fbi->var; ++ int r = 0; ++ ++ enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */ ++ ++ /*switch (plane->color_mode) {*/ ++ switch (mode) { ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUV420: ++ case OMAPFB_COLOR_YUY422: ++ r = -EINVAL; ++ break; ++ case OMAPFB_COLOR_CLUT_8BPP: ++ case OMAPFB_COLOR_CLUT_4BPP: ++ case OMAPFB_COLOR_CLUT_2BPP: ++ case OMAPFB_COLOR_CLUT_1BPP: ++ /* ++ if (fbdev->ctrl->setcolreg) ++ r = fbdev->ctrl->setcolreg(regno, red, green, blue, ++ transp, update_hw_pal); ++ */ ++ /* Fallthrough */ ++ r = -EINVAL; ++ break; ++ case OMAPFB_COLOR_RGB565: ++ case OMAPFB_COLOR_RGB444: ++ case OMAPFB_COLOR_RGB24P: ++ case OMAPFB_COLOR_RGB24U: ++ if (r != 0) ++ break; ++ ++ if (regno < 0) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (regno < 16) { ++ u16 pal; ++ pal = ((red >> (16 - var->red.length)) << ++ var->red.offset) | ++ ((green >> (16 - var->green.length)) << ++ var->green.offset) | ++ (blue >> (16 - var->blue.length)); ++ ((u32 *)(fbi->pseudo_palette))[regno] = pal; ++ } ++ break; ++ default: ++ BUG(); ++ } ++ return r; ++} ++ ++static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, ++ u_int transp, struct fb_info *info) ++{ ++ DBG("setcolreg\n"); ++ ++ return _setcolreg(info, regno, red, green, blue, transp, 1); ++} ++ ++static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) ++{ ++ int count, index, r; ++ u16 *red, *green, *blue, *transp; ++ u16 trans = 0xffff; ++ ++ DBG("setcmap\n"); ++ ++ red = cmap->red; ++ green = cmap->green; ++ blue = cmap->blue; ++ transp = cmap->transp; ++ index = cmap->start; ++ ++ for (count = 0; count < cmap->len; count++) { ++ if (transp) ++ trans = *transp++; ++ r = _setcolreg(info, index++, *red++, *green++, *blue++, trans, ++ count == cmap->len - 1); ++ if (r != 0) ++ return r; ++ } ++ ++ return 0; ++} ++ ++static int omapfb_blank(int blank, struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ int do_update = 0; ++ int r = 0; ++ ++ omapfb_lock(fbdev); ++ ++ switch (blank) { ++ case FB_BLANK_UNBLANK: ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) { ++ r = -EINVAL; ++ goto exit; ++ } ++ ++ if (display->resume) ++ r = display->resume(display); ++ ++ if (r == 0 && display->get_update_mode && ++ display->get_update_mode(display) == ++ OMAP_DSS_UPDATE_MANUAL) ++ do_update = 1; ++ ++ break; ++ ++ case FB_BLANK_POWERDOWN: ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) { ++ r = -EINVAL; ++ goto exit; ++ } ++ ++ if (display->suspend) ++ r = display->suspend(display); ++ ++ break; ++ ++ default: ++ r = -EINVAL; ++ } ++ ++exit: ++ omapfb_unlock(fbdev); ++ ++ if (r == 0 && do_update && display->update) ++ r = display->update(display, ++ 0, 0, ++ display->panel->timings.x_res, ++ display->panel->timings.y_res); ++ ++ return r; ++} ++ ++static struct fb_ops omapfb_ops = { ++ .owner = THIS_MODULE, ++ .fb_open = omapfb_open, ++ .fb_release = omapfb_release, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++ .fb_blank = omapfb_blank, ++ .fb_ioctl = omapfb_ioctl, ++ .fb_check_var = omapfb_check_var, ++ .fb_set_par = omapfb_set_par, ++ .fb_rotate = omapfb_rotate, ++ .fb_pan_display = omapfb_pan_display, ++ .fb_mmap = omapfb_mmap, ++ .fb_setcolreg = omapfb_setcolreg, ++ .fb_setcmap = omapfb_setcmap, ++}; ++ ++static void omapfb_free_fbmem(struct omapfb2_device *fbdev, int fbnum) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[fbnum]); ++ struct omapfb_mem_region *rg; ++ ++ rg = &ofbi->region; ++ ++ if (rg->paddr) ++ if (omap_vram_free(rg->paddr, rg->vaddr, rg->size)) ++ dev_err(fbdev->dev, "VRAM FREE failed\n"); ++ ++ rg->vaddr = NULL; ++ rg->paddr = 0; ++ rg->alloc = 0; ++ rg->size = 0; ++} ++ ++static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ DBG("free all fbmem\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) ++ omapfb_free_fbmem(fbdev, i); ++ ++ return 0; ++} ++ ++static int omapfb_alloc_fbmem(struct omapfb2_device *fbdev, int fbnum, ++ unsigned long size) ++{ ++ struct omapfb_info *ofbi; ++ struct omapfb_mem_region *rg; ++ unsigned long paddr; ++ void *vaddr; ++ ++ size = PAGE_ALIGN(size); ++ ++ ofbi = FB2OFB(fbdev->fbs[fbnum]); ++ rg = &ofbi->region; ++ memset(rg, 0, sizeof(*rg)); ++ ++ DBG("allocating %lu bytes for fb %d\n", ++ size, ofbi->id); ++ ++ vaddr = omap_vram_alloc(OMAPFB_MEMTYPE_SDRAM, size, &paddr); ++ DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr); ++ ++ if (vaddr == NULL) { ++ dev_err(fbdev->dev, ++ "failed to allocate framebuffer\n"); ++ return -ENOMEM; ++ } ++ ++ rg->paddr = paddr; ++ rg->vaddr = vaddr; ++ rg->size = size; ++ rg->alloc = 1; ++ ++ return 0; ++} ++ ++int omapfb_realloc_fbmem(struct omapfb2_device *fbdev, int fbnum, ++ unsigned long size) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[fbnum]); ++ struct omapfb_mem_region *rg = &ofbi->region; ++ unsigned old_size = rg->size; ++ int r; ++ ++ size = PAGE_ALIGN(size); ++ ++ omapfb_free_fbmem(fbdev, fbnum); ++ ++ if (size == 0) ++ return 0; ++ ++ r = omapfb_alloc_fbmem(fbdev, fbnum, size); ++ ++ if (r) ++ omapfb_alloc_fbmem(fbdev, fbnum, old_size); ++ ++ return r; ++} ++ ++/* allocate fbmem using display resolution as reference */ ++static int omapfb_alloc_fbmem_display(struct omapfb2_device *fbdev, int fbnum, ++ unsigned long def_vram) ++{ ++ struct omapfb_info *ofbi; ++ struct omap_display *display; ++ int bytespp; ++ unsigned long size; ++ ++ ofbi = FB2OFB(fbdev->fbs[fbnum]); ++ display = fb2display(fbdev->fbs[fbnum]); ++ ++ if (!display) ++ return 0; ++ ++ switch (display->panel->bpp) { ++ case 16: ++ bytespp = 2; ++ break; ++ case 24: ++ case 32: ++ bytespp = 4; ++ break; ++ default: ++ bytespp = 4; ++ break; ++ } ++ ++ size = display->panel->timings.x_res * display->panel->timings.y_res * ++ bytespp; ++ ++ if (def_vram > size) ++ size = def_vram; ++ ++ return omapfb_alloc_fbmem(fbdev, fbnum, size); ++} ++ ++static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) ++{ ++ int i, r; ++ unsigned long vrams[10]; ++ ++ memset(vrams, 0, sizeof(vrams)); ++ ++ if (def_vram) { ++ char *p = def_vram; ++ i = 0; ++ ++ while (true) { ++ unsigned long size; ++ ++ size = memparse(p, &p); ++ ++ if (size == 0) { ++ dev_err(fbdev->dev, "illegal vram size\n"); ++ break; ++ } ++ ++ vrams[i++] = size; ++ ++ if (*p != ',') ++ break; ++ ++ p++; ++ } ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = omapfb_alloc_fbmem_display(fbdev, i, vrams[i]); ++ ++ if (r) ++ return r; ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ struct omapfb_mem_region *rg; ++ rg = &ofbi->region; ++ ++ DBG("region%d phys %08x virt %p size=%lu\n", ++ i, ++ rg->paddr, ++ rg->vaddr, ++ rg->size); ++ } ++ ++ return 0; ++} ++ ++/* initialize fb_info, var, fix to something sane based on the display */ ++static int fbinfo_init(struct omapfb2_device *fbdev, struct fb_info *fbi) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ struct omap_display *display = fb2display(fbi); ++ int r = 0; ++ ++ fbi->fbops = &omapfb_ops; ++ fbi->flags = FBINFO_FLAG_DEFAULT; ++ fbi->pseudo_palette = fbdev->pseudo_palette; ++ ++ strncpy(fix->id, MODULE_NAME, sizeof(fix->id)); ++ ++ var->nonstd = 0; ++ ++ if (display) { ++ var->xres = display->panel->timings.x_res; ++ var->yres = display->panel->timings.y_res; ++ var->xres_virtual = var->xres; ++ var->yres_virtual = var->yres; ++ /* var->rotate = def_rotate; */ ++ ++ switch (display->panel->bpp) { ++ case 16: ++ var->bits_per_pixel = 16; ++ break; ++ case 18: ++ var->bits_per_pixel = 16; ++ break; ++ case 24: ++ var->bits_per_pixel = 32; ++ break; ++ default: ++ dev_err(fbdev->dev, "illegal display bpp\n"); ++ return -EINVAL; ++ } ++ } ++ ++ r = check_fb_var(fbi, var); ++ if (r) ++ goto err; ++ ++ set_fb_fix(fbi); ++ ++#ifdef DEBUG ++ if (omapfb_debug) ++ fill_fb(FB2OFB(fbi)->region.vaddr, fbi); ++#endif ++err: ++ return r; ++} ++ ++static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi) ++{ ++ fb_dealloc_cmap(&fbi->cmap); ++} ++ ++ ++static void omapfb_free_resources(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ DBG("free_resources\n"); ++ ++ if (fbdev == NULL) ++ return; ++ ++ for (i = 0; i < fbdev->num_fbs; i++) ++ unregister_framebuffer(fbdev->fbs[i]); ++ ++ /* free the reserved fbmem */ ++ omapfb_free_all_fbmem(fbdev); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ fbinfo_cleanup(fbdev, fbdev->fbs[i]); ++ framebuffer_release(fbdev->fbs[i]); ++ } ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED) ++ fbdev->displays[i]->disable(fbdev->displays[i]); ++ ++ omap_dss_put_display(fbdev->displays[i]); ++ } ++ ++ dev_set_drvdata(fbdev->dev, NULL); ++ kfree(fbdev); ++} ++ ++static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) ++{ ++ int r, i; ++ ++ fbdev->num_fbs = 0; ++ ++ DBG("create %d framebuffers\n", CONFIG_FB_OMAP2_NUM_FBS); ++ ++ /* allocate fb_infos */ ++ for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) { ++ struct fb_info *fbi; ++ struct omapfb_info *ofbi; ++ ++ fbi = framebuffer_alloc(sizeof(struct omapfb_info), ++ fbdev->dev); ++ ++ if (fbi == NULL) { ++ dev_err(fbdev->dev, ++ "unable to allocate memory for plane info\n"); ++ return -ENOMEM; ++ } ++ ++ fbdev->fbs[i] = fbi; ++ ++ ofbi = FB2OFB(fbi); ++ ofbi->fbdev = fbdev; ++ ofbi->id = i; ++ fbdev->num_fbs++; ++ } ++ ++ DBG("fb_infos allocated\n"); ++ ++ /* assign overlays for the fbs */ ++ for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ ++ ofbi->overlays[0] = fbdev->overlays[i]; ++ ofbi->num_overlays = 1; ++ } ++ ++ /* allocate fb memories */ ++ r = omapfb_allocate_all_fbs(fbdev); ++ if (r) { ++ dev_err(fbdev->dev, "failed to allocate fbmem\n"); ++ return r; ++ } ++ ++ DBG("fbmems allocated\n"); ++ ++ /* setup fb_infos */ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = fbinfo_init(fbdev, fbdev->fbs[i]); ++ if (r) { ++ dev_err(fbdev->dev, "failed to setup fb_info\n"); ++ return r; ++ } ++ } ++ ++ DBG("fb_infos initialized\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = register_framebuffer(fbdev->fbs[i]); ++ if (r != 0) { ++ dev_err(fbdev->dev, ++ "registering framebuffer %d failed\n", i); ++ return r; ++ } ++ } ++ ++ DBG("framebuffers registered\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = omapfb_apply_changes(fbdev->fbs[i], 1); ++ if (r) ++ dev_err(fbdev->dev, "failed to change mode\n"); ++ } ++ ++ /* Enable the first framebuffer that has overlay that is connected ++ * to display. Usually this would be the GFX plane. */ ++ r = 0; ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ int t; ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ struct omap_overlay *ovl = ofbi->overlays[t]; ++ if (ovl->manager && ovl->manager->display) { ++ ovl->enable(ovl, 1); ++ r = 1; ++ break; ++ } ++ } ++ ++ if (r) ++ break; ++ } ++ ++ DBG("create_framebuffers done\n"); ++ ++ return 0; ++} ++ ++int omapfb_mode_to_timings(const char *mode_str, ++ struct omap_video_timings *timings, unsigned *bpp) ++{ ++ struct fb_info fbi; ++ struct fb_var_screeninfo var; ++ struct fb_ops fbops; ++ int r; ++ ++ /* this is quite a hack, but I wanted to use the modedb and for ++ * that we need fb_info and var, so we create dummy ones */ ++ ++ memset(&fbi, 0, sizeof(fbi)); ++ memset(&var, 0, sizeof(var)); ++ memset(&fbops, 0, sizeof(fbops)); ++ fbi.fbops = &fbops; ++ ++ r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24); ++ ++ if (r != 0) { ++ timings->pixel_clock = PICOS2KHZ(var.pixclock); ++ timings->hfp = var.left_margin; ++ timings->hbp = var.right_margin; ++ timings->vfp = var.upper_margin; ++ timings->vbp = var.lower_margin; ++ timings->hsw = var.hsync_len; ++ timings->vsw = var.vsync_len; ++ timings->x_res = var.xres; ++ timings->y_res = var.yres; ++ ++ switch (var.bits_per_pixel) { ++ case 16: ++ *bpp = 16; ++ break; ++ case 24: ++ case 32: ++ default: ++ *bpp = 24; ++ break; ++ } ++ ++ return 0; ++ } else { ++ return -EINVAL; ++ } ++} ++ ++static int omapfb_probe(struct platform_device *pdev) ++{ ++ struct omapfb2_device *fbdev = NULL; ++ int r = 0; ++ int i, t; ++ struct omap_overlay *ovl; ++ struct omap_display *def_display; ++ ++ DBG("omapfb_probe\n"); ++ ++ if (pdev->num_resources != 0) { ++ dev_err(&pdev->dev, "probed for an unknown device\n"); ++ r = -ENODEV; ++ goto err0; ++ } ++ ++ fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL); ++ if (fbdev == NULL) { ++ r = -ENOMEM; ++ goto err0; ++ } ++ ++ mutex_init(&fbdev->mtx); ++ ++ fbdev->dev = &pdev->dev; ++ platform_set_drvdata(pdev, fbdev); ++ ++ fbdev->num_displays = 0; ++ t = omap_dss_get_num_displays(); ++ for (i = 0; i < t; i++) { ++ struct omap_display *display; ++ display = omap_dss_get_display(i); ++ if (!display) { ++ dev_err(&pdev->dev, "can't get display %d\n", i); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ fbdev->displays[fbdev->num_displays++] = display; ++ } ++ ++ if (fbdev->num_displays == 0) { ++ dev_err(&pdev->dev, "no displays\n"); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ fbdev->num_overlays = omap_dss_get_num_overlays(); ++ for (i = 0; i < fbdev->num_overlays; i++) ++ fbdev->overlays[i] = omap_dss_get_overlay(i); ++ ++ fbdev->num_managers = omap_dss_get_num_overlay_managers(); ++ for (i = 0; i < fbdev->num_managers; i++) ++ fbdev->managers[i] = omap_dss_get_overlay_manager(i); ++ ++ ++ /* gfx overlay should be the default one. find a display ++ * connected to that, and use it as default display */ ++ ovl = omap_dss_get_overlay(0); ++ if (ovl->manager && ovl->manager->display) { ++ def_display = ovl->manager->display; ++ } else { ++ dev_err(&pdev->dev, "cannot find default display\n"); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ if (def_mode && strlen(def_mode) > 0) ++ { ++ struct omap_video_timings timings; ++ unsigned bpp; ++ ++ if (omapfb_mode_to_timings(def_mode, &timings, &bpp) == 0) { ++ if (def_display->set_timings) ++ def_display->set_timings(def_display, &timings); ++ ++ def_display->panel->bpp = bpp; ++ } ++ } ++ ++ r = omapfb_create_framebuffers(fbdev); ++ if (r) ++ goto cleanup; ++ ++ for (i = 0; i < fbdev->num_managers; i++) { ++ struct omap_overlay_manager *mgr; ++ mgr = fbdev->managers[i]; ++ r = mgr->apply(mgr); ++ if (r) { ++ dev_err(fbdev->dev, "failed to apply dispc config\n"); ++ goto cleanup; ++ } ++ } ++ ++ DBG("mgr->apply'ed\n"); ++ ++ r = def_display->enable(def_display); ++ if (r) { ++ dev_err(fbdev->dev, "Failed to enable display '%s'\n", ++ def_display->name); ++ goto cleanup; ++ } ++ ++ /* set the update mode */ ++ if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { ++#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_AUTO); ++ if (def_display->enable_te) ++ def_display->enable_te(def_display, 1); ++#else ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_MANUAL); ++ if (def_display->enable_te) ++ def_display->enable_te(def_display, 0); ++#endif ++ } else { ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_AUTO); ++ } ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ struct omap_display *display = fbdev->displays[i]; ++ ++ if (display->update) ++ display->update(display, ++ 0, 0, ++ display->panel->timings.x_res, ++ display->panel->timings.y_res); ++ } ++ ++ DBG("display->updated\n"); ++ ++ omapfb_create_sysfs(fbdev); ++ DBG("sysfs created\n"); ++ ++ return 0; ++ ++cleanup: ++ omapfb_free_resources(fbdev); ++err0: ++ dev_err(&pdev->dev, "failed to setup omapfb\n"); ++ return r; ++} ++ ++static int omapfb_remove(struct platform_device *pdev) ++{ ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ++ /* FIXME: wait till completion of pending events */ ++ ++ omapfb_remove_sysfs(fbdev); ++ ++ omapfb_free_resources(fbdev); ++ ++ return 0; ++} ++ ++static struct platform_driver omapfb_driver = { ++ .probe = omapfb_probe, ++ .remove = omapfb_remove, ++ .driver = { ++ .name = "omapfb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init omapfb_init(void) ++{ ++ DBG("omapfb_init\n"); ++ ++ if (platform_driver_register(&omapfb_driver)) { ++ printk(KERN_ERR "failed to register omapfb driver\n"); ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++ ++static void __exit omapfb_exit(void) ++{ ++ DBG("omapfb_exit\n"); ++ platform_driver_unregister(&omapfb_driver); ++} ++ ++module_param_named(video_mode, def_mode, charp, 0); ++module_param_named(vram, def_vram, charp, 0); ++ ++/* late_initcall to let panel/ctrl drivers loaded first. ++ * I guess better option would be a more dynamic approach, ++ * so that omapfb reacts to new panels when they are loaded */ ++late_initcall(omapfb_init); ++/*module_init(omapfb_init);*/ ++module_exit(omapfb_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("OMAP2/3 Framebuffer"); ++MODULE_LICENSE("GPL v2"); +diff --git a/drivers/video/omap2/omapfb-sysfs.c b/drivers/video/omap2/omapfb-sysfs.c +new file mode 100644 +index 0000000..4383e44 +--- /dev/null ++++ b/drivers/video/omap2/omapfb-sysfs.c +@@ -0,0 +1,901 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-sysfs.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "omapfb.h" ++ ++static int omapfb_attach_framebuffer(struct fb_info *fbi, ++ struct omap_overlay *ovl) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ int i, t; ++ int r; ++ ++ if (ofbi->num_overlays >= OMAPFB_MAX_OVL_PER_FB) { ++ dev_err(fbdev->dev, "fb has max number of overlays already\n"); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i] == ovl) { ++ dev_err(fbdev->dev, "fb already attached to overlay\n"); ++ return -EINVAL; ++ } ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]); ++ for (t = 0; t < ofbi2->num_overlays; t++) { ++ if (ofbi2->overlays[t] == ovl) { ++ dev_err(fbdev->dev, "overlay already in use\n"); ++ return -EINVAL; ++ } ++ } ++ } ++ ++ ofbi->overlays[ofbi->num_overlays++] = ovl; ++ ++/* ++ if (ovl->manager && ovl->manager->display) ++ omapfb_adjust_fb(fbi, ovl, 0, 0); ++*/ ++ r = omapfb_apply_changes(fbi, 1); ++ if (r) ++ return r; ++ ++ if (ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ ++ return 0; ++} ++ ++static int omapfb_detach_framebuffer(struct fb_info *fbi, ++ struct omap_overlay *ovl) ++{ ++ int i; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i] == ovl) ++ break; ++ } ++ ++ if (i == ofbi->num_overlays) { ++ dev_err(fbdev->dev, "cannot detach fb, overlay not attached\n"); ++ return -EINVAL; ++ } ++ ++ ovl->enable(ovl, 0); ++ ++ if (ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ ++ for (i = i + 1; i < ofbi->num_overlays; i++) ++ ofbi->overlays[i-1] = ofbi->overlays[i]; ++ ++ ofbi->num_overlays--; ++ ++ return 0; ++} ++ ++ ++static ssize_t show_framebuffers(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ssize_t l = 0, size = PAGE_SIZE; ++ int i, t; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ struct omapfb_mem_region *rg; ++ ++ rg = &ofbi->region; ++ ++ l += snprintf(buf + l, size - l, "%d p:%08x v:%p size:%lu t:", ++ ofbi->id, ++ rg->paddr, rg->vaddr, rg->size); ++ ++ if (ofbi->num_overlays == 0) ++ l += snprintf(buf + l, size - l, "none"); ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ struct omap_overlay *ovl; ++ ovl = ofbi->overlays[t]; ++ ++ l += snprintf(buf + l, size - l, "%s%s", ++ t == 0 ? "" : ",", ++ ovl->name); ++ } ++ ++ l += snprintf(buf + l, size - l, "\n"); ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static struct omap_overlay *find_overlay_by_name(struct omapfb2_device *fbdev, ++ char *name) ++{ ++ int i; ++ ++ for (i = 0; i < fbdev->num_overlays; i++) ++ if (strcmp(name, fbdev->overlays[i]->name) == 0) ++ return fbdev->overlays[i]; ++ ++ return NULL; ++} ++ ++static struct omap_display *find_display_by_name(struct omapfb2_device *fbdev, ++ char *name) ++{ ++ int i; ++ ++ for (i = 0; i < fbdev->num_displays; i++) ++ if (strcmp(name, fbdev->displays[i]->name) == 0) ++ return fbdev->displays[i]; ++ ++ return NULL; ++} ++ ++static struct omap_overlay_manager *find_manager_by_name( ++ struct omapfb2_device *fbdev, ++ char *name) ++{ ++ int i; ++ ++ for (i = 0; i < fbdev->num_managers; i++) ++ if (strcmp(name, fbdev->managers[i]->name) == 0) ++ return fbdev->managers[i]; ++ ++ return NULL; ++} ++ ++static int parse_overlays(struct omapfb2_device *fbdev, char *str, ++ struct omap_overlay *ovls[]) ++{ ++ int num_ovls = 0; ++ int s, e = 0; ++ char ovlname[10]; ++ ++ while (1) { ++ struct omap_overlay *ovl; ++ ++ s = e; ++ ++ while (e < strlen(str) && str[e] != ',') ++ e++; ++ ++ strncpy(ovlname, str + s, e - s); ++ ovlname[e-s] = 0; ++ ++ DBG("searching for '%s'\n", ovlname); ++ ovl = find_overlay_by_name(fbdev, ovlname); ++ ++ if (ovl) { ++ DBG("found an overlay\n"); ++ ovls[num_ovls] = ovl; ++ num_ovls++; ++ } else { ++ DBG("unknown overlay %s\n", str); ++ return 0; ++ } ++ ++ if (e == strlen(str)) ++ break; ++ ++ e++; ++ } ++ ++ return num_ovls; ++} ++ ++static ssize_t store_framebuffers(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ int idx; ++ char fbname[3]; ++ unsigned long fbnum; ++ char ovlnames[40]; ++ int num_ovls = 0; ++ struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB]; ++ struct fb_info *fbi; ++ struct omapfb_info *ofbi; ++ int r, i; ++ ++ idx = 0; ++ while (idx < count && buf[idx] != ' ') ++ ++idx; ++ ++ if (idx == count) ++ return -EINVAL; ++ ++ if (idx >= sizeof(fbname)) ++ return -EINVAL; ++ ++ strncpy(fbname, buf, idx); ++ fbname[idx] = 0; ++ idx++; ++ ++ if (strict_strtoul(fbname, 10, &fbnum)) ++ return -EINVAL; ++ ++ r = sscanf(buf + idx, "t:%39s", ovlnames); ++ ++ if (r != 1) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ omapfb_lock(fbdev); ++ ++ if (fbnum >= fbdev->num_fbs) { ++ dev_err(dev, "fb not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ fbi = fbdev->fbs[fbnum]; ++ ofbi = FB2OFB(fbi); ++ ++ if (strcmp(ovlnames, "none") == 0) { ++ num_ovls = 0; ++ } else { ++ num_ovls = parse_overlays(fbdev, ovlnames, ovls); ++ ++ if (num_ovls == 0) { ++ dev_err(dev, "overlays not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ } ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ r = omapfb_detach_framebuffer(fbi, ofbi->overlays[i]); ++ if (r) { ++ dev_err(dev, "detach failed\n"); ++ goto err; ++ } ++ } ++ ++ if (num_ovls > 0) { ++ for (i = 0; i < num_ovls; i++) { ++ r = omapfb_attach_framebuffer(fbi, ovls[i]); ++ if (r) { ++ dev_err(dev, "attach failed\n"); ++ goto err; ++ } ++ } ++ } ++ ++ omapfb_unlock(fbdev); ++ return count; ++ ++err: ++ omapfb_unlock(fbdev); ++ return r; ++} ++ ++static ssize_t show_overlays(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ssize_t l = 0, size = PAGE_SIZE; ++ int i, mgr_num; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < fbdev->num_overlays; i++) { ++ struct omap_overlay *ovl; ++ struct omap_overlay_manager *mgr; ++ ++ ovl = fbdev->overlays[i]; ++ mgr = ovl->manager; ++ ++ for (mgr_num = 0; mgr_num < fbdev->num_managers; mgr_num++) ++ if (fbdev->managers[mgr_num] == mgr) ++ break; ++ ++ l += snprintf(buf + l, size - l, ++ "%s t:%s x:%d y:%d iw:%d ih:%d w: %d h: %d e:%d\n", ++ ovl->name, ++ mgr ? mgr->name : "none", ++ ovl->info.pos_x, ++ ovl->info.pos_y, ++ ovl->info.width, ++ ovl->info.height, ++ ovl->info.out_width, ++ ovl->info.out_height, ++ ovl->info.enabled); ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static ssize_t store_overlays(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ int idx; ++ struct omap_overlay *ovl = NULL; ++ struct omap_overlay_manager *mgr; ++ int r; ++ char ovlname[10]; ++ int posx, posy, outw, outh; ++ int enabled; ++ ++ idx = 0; ++ while (idx < count && buf[idx] != ' ') ++ ++idx; ++ ++ if (idx == count) ++ return -EINVAL; ++ ++ if (idx >= sizeof(ovlname)) ++ return -EINVAL; ++ ++ strncpy(ovlname, buf, idx); ++ ovlname[idx] = 0; ++ idx++; ++ ++ omapfb_lock(fbdev); ++ ++ ovl = find_overlay_by_name(fbdev, ovlname); ++ ++ if (!ovl) { ++ dev_err(dev, "ovl not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ DBG("ovl %s found\n", ovl->name); ++ ++ mgr = ovl->manager; ++ ++ posx = ovl->info.pos_x; ++ posy = ovl->info.pos_y; ++ outw = ovl->info.out_width; ++ outh = ovl->info.out_height; ++ enabled = ovl->info.enabled; ++ ++ while (idx < count) { ++ char c; ++ int val; ++ int len; ++ char sval[10]; ++ ++ r = sscanf(buf + idx, "%c:%d%n", &c, &val, &len); ++ ++ if (r != 2) { ++ val = 0; ++ ++ r = sscanf(buf + idx, "%c:%9s%n", &c, sval, &len); ++ ++ if (r != 2) { ++ dev_err(dev, "sscanf failed, aborting\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ } else { ++ sval[0] = 0; ++ } ++ ++ switch (c) { ++ case 't': ++ if (strcmp(sval, "none") == 0) { ++ mgr = NULL; ++ } else { ++ mgr = find_manager_by_name(fbdev, sval); ++ ++ if (mgr == NULL) { ++ dev_err(dev, "no such manager\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ DBG("manager %s found\n", mgr->name); ++ } ++ ++ break; ++ ++ case 'x': ++ posx = val; ++ break; ++ ++ case 'y': ++ posy = val; ++ break; ++ ++ case 'w': ++ if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) ++ outw = val; ++ break; ++ ++ case 'h': ++ if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) ++ outh = val; ++ break; ++ ++ case 'e': ++ enabled = val; ++ break; ++ ++ default: ++ dev_err(dev, "unknown option %c\n", c); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ idx += len + 1; ++ } ++ ++ r = ovl->setup_output(ovl, posx, posy, outw, outh); ++ ++ if (r) { ++ dev_err(dev, "setup overlay failed\n"); ++ goto err; ++ } ++ ++ if (mgr != ovl->manager) { ++ /* detach old manager */ ++ if (ovl->manager) { ++ r = ovl->unset_manager(ovl); ++ if (r) { ++ dev_err(dev, "detach failed\n"); ++ goto err; ++ } ++ } ++ ++ if (mgr) { ++ r = ovl->set_manager(ovl, mgr); ++ if (r) { ++ dev_err(dev, "Failed to attach overlay\n"); ++ goto err; ++ } ++ } ++ } ++ ++ r = ovl->enable(ovl, enabled); ++ ++ if (r) { ++ dev_err(dev, "enable overlay failed\n"); ++ goto err; ++ } ++ ++ if (mgr) { ++ r = mgr->apply(mgr); ++ if (r) { ++ dev_err(dev, "failed to apply dispc config\n"); ++ goto err; ++ } ++ } else { ++ ovl->enable(ovl, 0); ++ } ++ ++ if (mgr && mgr->display && mgr->display->update) ++ mgr->display->update(mgr->display, ++ 0, 0, ++ mgr->display->panel->timings.x_res, ++ mgr->display->panel->timings.y_res); ++ ++ omapfb_unlock(fbdev); ++ return count; ++ ++err: ++ omapfb_unlock(fbdev); ++ return r; ++} ++ ++static ssize_t show_managers(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ssize_t l = 0, size = PAGE_SIZE; ++ int i; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < fbdev->num_managers; i++) { ++ struct omap_display *display; ++ struct omap_overlay_manager *mgr; ++ ++ mgr = fbdev->managers[i]; ++ display = mgr->display; ++ ++ l += snprintf(buf + l, size - l, "%s t:%s\n", ++ mgr->name, display ? display->name : "none"); ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static ssize_t store_managers(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ int idx; ++ struct omap_overlay_manager *mgr; ++ struct omap_display *display; ++ char mgrname[10]; ++ char displayname[10]; ++ int r; ++ ++ idx = 0; ++ while (idx < count && buf[idx] != ' ') ++ ++idx; ++ ++ if (idx == count) ++ return -EINVAL; ++ ++ if (idx >= sizeof(mgrname)) ++ return -EINVAL; ++ ++ strncpy(mgrname, buf, idx); ++ mgrname[idx] = 0; ++ idx++; ++ ++ omapfb_lock(fbdev); ++ ++ mgr = find_manager_by_name(fbdev, mgrname); ++ ++ if (!mgr) { ++ dev_err(dev, "manager not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ r = sscanf(buf + idx, "t:%9s", displayname); ++ ++ if (r != 1) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ if (strcmp(displayname, "none") == 0) { ++ display = NULL; ++ } else { ++ display = find_display_by_name(fbdev, displayname); ++ ++ if (!display) { ++ dev_err(dev, "display not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ } ++ ++ if (mgr->display) { ++ r = mgr->unset_display(mgr); ++ if (r) { ++ dev_err(dev, "failed to unset display\n"); ++ goto err; ++ } ++ } ++ ++ if (display) { ++ r = mgr->set_display(mgr, display); ++ if (r) { ++ dev_err(dev, "failed to set manager\n"); ++ goto err; ++ } ++ ++ r = mgr->apply(mgr); ++ if (r) { ++ dev_err(dev, "failed to apply dispc config\n"); ++ goto err; ++ } ++ } ++ ++ omapfb_unlock(fbdev); ++ return count; ++ ++err: ++ omapfb_unlock(fbdev); ++ return r; ++} ++ ++static ssize_t show_displays(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ssize_t l = 0, size = PAGE_SIZE; ++ int i; ++ struct omap_video_timings timings; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ struct omap_display *display; ++ enum omap_dss_update_mode mode = -1; ++ int te = 0; ++ ++ display = fbdev->displays[i]; ++ ++ if (display->get_update_mode) ++ mode = display->get_update_mode(display); ++ ++ if (display->get_te) ++ te = display->get_te(display); ++ ++ if (display->get_timings) ++ display->get_timings(display, &timings); ++ else ++ memset(&timings, 0, sizeof(timings)); ++ ++ l += snprintf(buf + l, size - l, ++ "%s e:%d u:%d t:%d h:%u/%u/%u/%u " ++ "v:%u/%u/%u/%u p:%u\n", ++ display->name, ++ display->state != OMAP_DSS_DISPLAY_DISABLED, ++ mode, te, ++ timings.x_res, ++ timings.hfp, timings.hbp, timings.hsw, ++ timings.y_res, ++ timings.vfp, timings.vbp, timings.vsw, ++ timings.pixel_clock); ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static ssize_t store_displays(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ int enable; ++ struct omap_video_timings old_timings; ++ struct omap_video_timings new_timings; ++ enum omap_dss_update_mode mode; ++ struct omap_display *display = NULL; ++ int r; ++ int te; ++ char str[128]; ++ char *s, *tok; ++ ++ if (strlen(buf) > sizeof(str) - 1) ++ return -EINVAL; ++ ++ strcpy(str, buf); ++ ++ /* remove trailing linefeeds */ ++ s = str + strlen(str) - 1; ++ while (s >= str && *s == '\n') { ++ *s = 0; ++ s--; ++ } ++ ++ s = str; ++ ++ if ((tok = strsep(&s, " ")) == 0) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ ++ display = find_display_by_name(fbdev, tok); ++ ++ if (!display) { ++ dev_err(dev, "display not found\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ enable = display->state != OMAP_DSS_DISPLAY_DISABLED; ++ if (display->get_update_mode) ++ mode = display->get_update_mode(display); ++ else ++ mode = 0; ++ ++ if (display->get_te) ++ te = display->get_te(display); ++ else ++ te = 0; ++ ++ if (display->get_timings) ++ display->get_timings(display, &old_timings); ++ else ++ memset(&old_timings, 0, sizeof(old_timings)); ++ ++ memcpy(&new_timings, &old_timings, sizeof(new_timings)); ++ ++ while ((tok = strsep(&s, " "))) { ++ char c, *o; ++ ++ if (strlen(tok) < 3 || tok[1] != ':') { ++ dev_err(dev, "illegal option\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ c = tok[0]; ++ o = tok + 2; ++ ++ switch (c) { ++ case 'e': ++ enable = simple_strtoul(o, NULL, 0); ++ break; ++ ++ case 'u': ++ mode = simple_strtoul(o, NULL, 0); ++ break; ++ ++ case 't': ++ te = simple_strtoul(o, NULL, 0); ++ break; ++ ++ case 'm': { ++ unsigned bpp; ++ if (omapfb_mode_to_timings(o, &new_timings, &bpp) != 0) ++ memset(&new_timings, 0, sizeof(new_timings)); ++ ++ break; ++ } ++ ++ case 'h': { ++ unsigned xres, hfp, hbp, hsw; ++ ++ if (sscanf(o, "%u/%u/%u/%u", ++ &xres, &hfp, &hbp, &hsw) != 4) { ++ dev_err(dev, "illegal horizontal timings\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ new_timings.x_res = xres; ++ new_timings.hfp = hfp; ++ new_timings.hbp = hbp; ++ new_timings.hsw = hsw; ++ break; ++ } ++ ++ case 'v': { ++ unsigned yres, vfp, vbp, vsw; ++ ++ if (sscanf(o, "%u/%u/%u/%u", ++ &yres, &vfp, &vbp, &vsw) != 4) { ++ dev_err(dev, "illegal vertical timings\n"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ new_timings.y_res = yres; ++ new_timings.vfp = vfp; ++ new_timings.vbp = vbp; ++ new_timings.vsw = vsw; ++ break; ++ } ++ ++ case 'p': ++ new_timings.pixel_clock = simple_strtoul(o, NULL, 0); ++ break; ++ ++ default: ++ dev_err(dev, "unknown option %c\n", c); ++ r = -EINVAL; ++ goto err; ++ } ++ } ++ ++ if (memcmp(&new_timings, &old_timings, sizeof(new_timings)) != 0) { ++ if (display->set_timings) ++ display->set_timings(display, &new_timings); ++ ++ /* sigh, bpp is not a setting of the display, but ++ * the overlay. */ ++ //def_display->panel->bpp = bpp; ++ } ++ ++ if (enable != (display->state != OMAP_DSS_DISPLAY_DISABLED)) { ++ if (enable) { ++ r = display->enable(display); ++ if (r) ++ dev_err(dev, "failed to enable display\n"); ++ } else { ++ display->disable(display); ++ } ++ } ++ ++ if (display->set_update_mode && display->get_update_mode) { ++ if (mode != display->get_update_mode(display)) ++ display->set_update_mode(display, mode); ++ } ++ ++ if (display->enable_te && display->get_te) { ++ if (te != display->get_te(display)) ++ display->enable_te(display, te); ++ } ++ ++ r = count; ++err: ++ omapfb_unlock(fbdev); ++ return r; ++} ++ ++ ++static DEVICE_ATTR(framebuffers, S_IRUGO | S_IWUSR, ++ show_framebuffers, store_framebuffers); ++static DEVICE_ATTR(overlays, S_IRUGO | S_IWUSR, ++ show_overlays, store_overlays); ++static DEVICE_ATTR(managers, S_IRUGO | S_IWUSR, ++ show_managers, store_managers); ++static DEVICE_ATTR(displays, S_IRUGO | S_IWUSR, ++ show_displays, store_displays); ++ ++static struct attribute *omapfb_attrs[] = { ++ &dev_attr_framebuffers.attr, ++ &dev_attr_overlays.attr, ++ &dev_attr_managers.attr, ++ &dev_attr_displays.attr, ++ NULL, ++}; ++ ++static struct attribute_group omapfb_attr_group = { ++ .attrs = omapfb_attrs, ++}; ++ ++void omapfb_create_sysfs(struct omapfb2_device *fbdev) ++{ ++ int r; ++ ++ r = sysfs_create_group(&fbdev->dev->kobj, &omapfb_attr_group); ++ if (r) ++ dev_err(fbdev->dev, "failed to create sysfs clk file\n"); ++} ++ ++void omapfb_remove_sysfs(struct omapfb2_device *fbdev) ++{ ++ sysfs_remove_group(&fbdev->dev->kobj, &omapfb_attr_group); ++} ++ +diff --git a/drivers/video/omap2/omapfb.h b/drivers/video/omap2/omapfb.h +new file mode 100644 +index 0000000..9ba4f1b +--- /dev/null ++++ b/drivers/video/omap2/omapfb.h +@@ -0,0 +1,115 @@ ++/* ++ * linux/drivers/video/omap2/omapfb.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ ++#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ ++ ++#ifdef CONFIG_FB_OMAP2_DEBUG ++#define DEBUG ++#endif ++ ++#ifdef DEBUG ++extern unsigned int omapfb_debug; ++#define DBG(format, ...) \ ++ if (omapfb_debug) \ ++ printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par)) ++ ++/* max number of overlays to which a framebuffer data can be direct */ ++#define OMAPFB_MAX_OVL_PER_FB 3 ++ ++/* appended to fb_info */ ++struct omapfb_info { ++ int id; ++ struct omapfb_mem_region region; ++ atomic_t map_count; ++ int num_overlays; ++ struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; ++ struct omapfb2_device *fbdev; ++}; ++ ++struct omapfb2_device { ++ struct device *dev; ++ struct mutex mtx; ++ ++ u32 pseudo_palette[17]; ++ ++ int state; ++ ++ int num_fbs; ++ struct fb_info *fbs[10]; ++ ++ int num_displays; ++ struct omap_display *displays[10]; ++ int num_overlays; ++ struct omap_overlay *overlays[10]; ++ int num_managers; ++ struct omap_overlay_manager *managers[10]; ++}; ++ ++void set_fb_fix(struct fb_info *fbi); ++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var); ++int omapfb_realloc_fbmem(struct omapfb2_device *fbdev, int fbnum, ++ unsigned long size); ++int omapfb_apply_changes(struct fb_info *fbi, int init); ++int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, ++ int posx, int posy, int outw, int outh); ++ ++void omapfb_create_sysfs(struct omapfb2_device *fbdev); ++void omapfb_remove_sysfs(struct omapfb2_device *fbdev); ++ ++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg); ++ ++int omapfb_mode_to_timings(const char *mode_str, ++ struct omap_video_timings *timings, unsigned *bpp); ++ ++/* find the display connected to this fb, if any */ ++static inline struct omap_display *fb2display(struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int i; ++ ++ /* XXX: returns the display connected to first attached overlay */ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->manager) ++ return ofbi->overlays[i]->manager->display; ++ } ++ ++ return NULL; ++} ++ ++static inline void omapfb_lock(struct omapfb2_device *fbdev) ++{ ++ mutex_lock(&fbdev->mtx); ++} ++ ++static inline void omapfb_unlock(struct omapfb2_device *fbdev) ++{ ++ mutex_unlock(&fbdev->mtx); ++} ++ ++ ++#endif +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0003-DSS-Add-generic-DVI-panel.patch b/packages/linux/linux-omap/0003-DSS-Add-generic-DVI-panel.patch new file mode 100644 index 0000000000..d043671eaf --- /dev/null +++ b/packages/linux/linux-omap/0003-DSS-Add-generic-DVI-panel.patch @@ -0,0 +1,146 @@ +From e9f476d658fb5c7de57498d54c0acd6429439350 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Mon, 5 Jan 2009 15:06:40 +0200 +Subject: [PATCH] DSS: Add generic DVI panel + +You also need DSI PLL to generate pix clock for 1280x1024. + +Signed-off-by: Tomi Valkeinen +--- + drivers/video/omap2/Kconfig | 5 ++ + drivers/video/omap2/Makefile | 2 + + drivers/video/omap2/panel-generic.c | 97 +++++++++++++++++++++++++++++++++++ + 3 files changed, 104 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/omap2/panel-generic.c + +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +index 8be51a3..be00882 100644 +--- a/drivers/video/omap2/Kconfig ++++ b/drivers/video/omap2/Kconfig +@@ -37,6 +37,11 @@ config FB_OMAP2_NUM_FBS + menu "OMAP2/3 Display Device Drivers" + depends on OMAP2_DSS + ++config PANEL_GENERIC ++ tristate "Generic Panel" ++ help ++ Generic panel driver. ++ Used for DVI output for Beagle and OMAP3 SDP. + + endmenu + +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +index 51c2e00..f471a2b 100644 +--- a/drivers/video/omap2/Makefile ++++ b/drivers/video/omap2/Makefile +@@ -1,2 +1,4 @@ + obj-$(CONFIG_FB_OMAP2) += omapfb.o + omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o ++ ++obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o +diff --git a/drivers/video/omap2/panel-generic.c b/drivers/video/omap2/panel-generic.c +new file mode 100644 +index 0000000..5c8fecd +--- /dev/null ++++ b/drivers/video/omap2/panel-generic.c +@@ -0,0 +1,97 @@ ++/* ++ * Generic panel support ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++ ++#include ++ ++static int generic_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static int generic_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void generic_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++} ++ ++static int generic_panel_suspend(struct omap_display *display) ++{ ++ generic_panel_disable(display); ++ return 0; ++} ++ ++static int generic_panel_resume(struct omap_display *display) ++{ ++ return generic_panel_enable(display); ++} ++ ++static struct omap_panel generic_panel = { ++ .owner = THIS_MODULE, ++ .name = "panel-generic", ++ .init = generic_panel_init, ++ .enable = generic_panel_enable, ++ .disable = generic_panel_disable, ++ .suspend = generic_panel_suspend, ++ .resume = generic_panel_resume, ++ ++ .timings = { ++ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ ++ .x_res = 640, ++ .y_res = 480, ++ .pixel_clock = 23500, ++ .hfp = 48, ++ .hsw = 32, ++ .hbp = 80, ++ .vfp = 3, ++ .vsw = 4, ++ .vbp = 7, ++ }, ++ ++ .bpp = 24, ++ .config = OMAP_DSS_LCD_TFT, ++}; ++ ++ ++static int __init generic_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&generic_panel); ++ return 0; ++} ++ ++static void __exit generic_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&generic_panel); ++} ++ ++module_init(generic_panel_drv_init); ++module_exit(generic_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch b/packages/linux/linux-omap/0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch deleted file mode 100644 index c3dba570d6..0000000000 --- a/packages/linux/linux-omap/0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch +++ /dev/null @@ -1,259 +0,0 @@ -From 66fad2b53d3427962407b40af79e227635aed780 Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Tue, 4 Nov 2008 15:08:07 +0200 -Subject: [PATCH] DSS: Documentation for OMAP2/3 display subsystem - -Signed-off-by: Tomi Valkeinen ---- - Documentation/arm/OMAP/DSS | 239 ++++++++++++++++++++++++++++++++++++++++++++ - 1 files changed, 239 insertions(+), 0 deletions(-) - create mode 100644 Documentation/arm/OMAP/DSS - -diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS -new file mode 100644 -index 0000000..387bb73 ---- /dev/null -+++ b/Documentation/arm/OMAP/DSS -@@ -0,0 +1,239 @@ -+OMAP2/3 Display Subsystem -+------------------------- -+ -+This is an almost total rewrite of the OMAP FB driver in drivers/video/omap -+(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI, -+TV-out and multiple display support. -+ -+The DSS2 driver (omap-dss module) is in arch/arm/plat-omap/dss/, and the FB, -+panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live -+currently side by side, you can choose which one to use. -+ -+Features -+-------- -+ -+Working and tested features include: -+ -+- MIPI DPI (parallel) output -+- MIPI DSI output in command mode -+- MIPI DBI (RFBI) output (not tested for a while, might've gotten broken) -+- SDI output -+- TV output -+- All pieces can be compiled as a module or inside kernel -+- Use DISPC to update any of the outputs -+- Use CPU to update RFBI or DSI output -+- OMAP DISPC planes -+- RGB16, RGB24 packed, RGB24 unpacked -+- YUV2, UYVY -+- Scaling -+- Adjusting DSS FCK to find a good pixel clock -+- Use DSI DPLL to create DSS FCK -+ -+omap-dss driver -+------------ -+ -+The DSS driver does not itself have any support for Linux framebuffer, V4L or -+such like the current ones, but it has an internal kernel API that upper level -+drivers can use. -+ -+The DSS driver models OMAP's overlays, overlay managers and displays in a -+flexible way to enable non-common multi-display configuration. In addition to -+modelling the hardware overlays, omap-dss supports virtual overlays and overlay -+managers. These can be used when updating a display with CPU or system DMA. -+ -+Panel and controller drivers -+---------------------------- -+ -+The drivers implement panel or controller specific functionality and are not -+visible to users except through omapfb driver. They register themselves to the -+DSS driver. -+ -+omapfb driver -+------------- -+ -+The omapfb driver implements arbitrary number of standard linux framebuffers. -+These framebuffers can be routed flexibly to any overlays, thus allowing very -+dynamic display architecture. -+ -+The driver exports some omapfb specific ioctls, which are compatible with the -+ioctls in the old driver. -+ -+The rest of the non standard features are exported via sysfs. Whether the final -+implementation will use sysfs, or ioctls, is still open. -+ -+V4L2 drivers -+------------ -+ -+Currently there are no V4L2 display drivers planned, but it is possible to -+implement such either to omapfb driver, or as a separate one. From omap-dss -+point of view the V4L2 drivers should be similar to framebuffer driver. -+ -+Architecture -+-------------------- -+ -+Some clarification what the different components do: -+ -+ - Framebuffer is a memory area inside OMAP's SDRAM that contains the pixel -+ data for the image. Framebuffer has width and height and color depth. -+ - Overlay defines where the pixels are read from and where they go on the -+ screen. The overlay may be smaller than framebuffer, thus displaying only -+ part of the framebuffer. The position of the overlay may be changed if -+ the overlay is smaller than the display. -+ - Overlay manager combines the overlays in to one image and feeds them to -+ display. -+ - Display is the actual physical display device. -+ -+A framebuffer can be connected to multiple overlays to show the same pixel data -+on all of the overlays. Note that in this case the overlay input sizes must be -+the same, but, in case of video overlays, the output size can be different. Any -+framebuffer can be connected to any overlay. -+ -+An overlay can be connected to one overlay manager. Also DISPC overlays can be -+connected only to DISPC overlay managers, and virtual overlays can be only -+connected to virtual overlays. -+ -+An overlay manager can be connected to one display. There are certain -+restrictions which kinds of displays an overlay manager can be connected: -+ -+ - DISPC TV overlay manager can be only connected to TV display. -+ - Virtual overlay managers can only be connected to DBI or DSI displays. -+ - DISPC LCD overlay manager can be connected to all displays, except TV -+ display. -+ -+Sysfs -+----- -+The sysfs interface is a hack, but works for testing. I don't think sysfs -+interface is the best for this in the final version, but I don't quite know -+what would be the best interfaces for these things. -+ -+In /sys/devices/platform/omapfb we have four files: framebuffers, -+overlays, managers and displays. You can read them so see the current -+setup, and change them by writing to it in the form of -+" : :..." -+ -+"framebuffers" lists all framebuffers. Its format is: -+ -+ t: -+ -+"overlays" lists all overlays. Its format is: -+ -+ t: -+ x: -+ y: -+ iw: -+ ih: -+ w: -+ h: -+ e: -+ -+"managers" lists all overlay managers. Its format is: -+ -+ t: -+ -+"displays" lists all displays. Its format is: -+ -+ w: -+ h: -+ e: -+ u: -+ t: -+ -+There is also a debug sysfs file at /sys/devices/platform/omap-dss/clk which -+shows how DSS has configured the clocks. -+ -+Examples -+-------- -+ -+In the example scripts "omapfb" is a symlink to /sys/devices/platform/omapfb/. -+ -+Default setup on OMAP3 SDP -+-------------------------- -+ -+Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI -+and TV-out are not in use. The columns from left to right are: -+framebuffers, overlays, overlay managers, displays. Framebuffers are -+handled by omapfb, and the rest by the DSS. -+ -+FB0 --- GFX -\ DVI -+FB1 --- VID1 --+- LCD ---- LCD -+FB2 --- VID2 -/ TV ----- TV -+ -+Switch from LCD to DVI -+---------------------- -+ -+dviline=`cat omapfb/displays |grep dvi` -+w=`echo $dviline | cut -d " " -f 2 | cut -d ":" -f 2` -+h=`echo $dviline | cut -d " " -f 3 | cut -d ":" -f 2` -+ -+echo "lcd e:0" > omapfb/displays -+echo "lcd t:none" > omapfb/managers -+fbset -fb /dev/fb0 -xres $w -yres $h -+# at this point you have to switch the dvi/lcd dip-switch from the omap board -+echo "lcd t:dvi" > omapfb/managers -+echo "dvi e:1" > omapfb/displays -+ -+After this the configuration looks like: -+ -+FB0 --- GFX -\ -- DVI -+FB1 --- VID1 --+- LCD -/ LCD -+FB2 --- VID2 -/ TV ----- TV -+ -+Clone GFX overlay to LCD and TV -+------------------------------- -+ -+tvline=`cat /sys/devices/platform/omapfb/displays |grep tv` -+w=`echo $tvline | cut -d " " -f 2 | cut -d ":" -f 2` -+h=`echo $tvline | cut -d " " -f 3 | cut -d ":" -f 2` -+ -+echo "1 t:none" > omapfb/framebuffers -+echo "0 t:gfx,vid1" > omapfb/framebuffers -+echo "gfx e:1" > omapfb/overlays -+echo "vid1 t:tv w:$w h:$h e:1" > omapfb/overlays -+echo "tv e:1" > omapfb/displays -+ -+After this the configuration looks like (only relevant parts shown): -+ -+FB0 +-- GFX ---- LCD ---- LCD -+ \- VID1 ---- TV ---- TV -+ -+Misc notes -+---------- -+ -+OMAP FB allocates the framebuffer memory when it starts using -+dma_alloc_writecombine(). This requires large continuous physical memory areas -+and you can pre-reserve that area with "Consistent DMA memory size" Kconfig -+option. -+ -+Using DSI DPLL to generate pixel clock it is possible produce the pixel clock -+of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. -+ -+TODO -+---- -+ -+OMAP2 not tested for some time -+- DSS2 did work on OMAP2, but I haven't been able to test it for some time. -+ -+DSS locking -+ -+Error checking -+- Lots of checks are missing or implemented just as BUG() -+ -+Rotate (external FB) -+Rotate (VRFB) -+Rotate (SMS) -+ -+System DMA update for DSI -+- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how -+ to skip the empty byte?) -+ -+Power management -+- Context saving -+ -+Resolution change -+- The x/y res of the framebuffer are not display resolutions, but the size -+ of the overlay. -+- The display resolution affects all planes on the display. -+ -+OMAP1 support -+- Not sure if needed -+ --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch b/packages/linux/linux-omap/0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch deleted file mode 100644 index 661106b4ad..0000000000 --- a/packages/linux/linux-omap/0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch +++ /dev/null @@ -1,9842 +0,0 @@ -From 491d4b0389fb95e43017b7d4d07d866b114f6c7d Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Mon, 8 Dec 2008 13:43:36 +0200 -Subject: [PATCH] DSS: New display subsystem driver for OMAP2/3 - -Signed-off-by: Tomi Valkeinen ---- - arch/arm/plat-omap/Kconfig | 2 + - arch/arm/plat-omap/Makefile | 2 + - arch/arm/plat-omap/dss/Kconfig | 66 + - arch/arm/plat-omap/dss/Makefile | 6 + - arch/arm/plat-omap/dss/dispc.c | 2021 +++++++++++++++++++ - arch/arm/plat-omap/dss/display.c | 765 +++++++ - arch/arm/plat-omap/dss/dpi.c | 320 +++ - arch/arm/plat-omap/dss/dsi.c | 3135 +++++++++++++++++++++++++++++ - arch/arm/plat-omap/dss/dss.c | 789 ++++++++ - arch/arm/plat-omap/dss/dss.h | 268 +++ - arch/arm/plat-omap/dss/rfbi.c | 1225 +++++++++++ - arch/arm/plat-omap/dss/sdi.c | 150 ++ - arch/arm/plat-omap/dss/venc.c | 501 +++++ - arch/arm/plat-omap/include/mach/display.h | 463 +++++ - 14 files changed, 9713 insertions(+), 0 deletions(-) - create mode 100644 arch/arm/plat-omap/dss/Kconfig - create mode 100644 arch/arm/plat-omap/dss/Makefile - create mode 100644 arch/arm/plat-omap/dss/dispc.c - create mode 100644 arch/arm/plat-omap/dss/display.c - create mode 100644 arch/arm/plat-omap/dss/dpi.c - create mode 100644 arch/arm/plat-omap/dss/dsi.c - create mode 100644 arch/arm/plat-omap/dss/dss.c - create mode 100644 arch/arm/plat-omap/dss/dss.h - create mode 100644 arch/arm/plat-omap/dss/rfbi.c - create mode 100644 arch/arm/plat-omap/dss/sdi.c - create mode 100644 arch/arm/plat-omap/dss/venc.c - create mode 100644 arch/arm/plat-omap/include/mach/display.h - -diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig -index 960c13f..4e90667 100644 ---- a/arch/arm/plat-omap/Kconfig -+++ b/arch/arm/plat-omap/Kconfig -@@ -245,6 +245,8 @@ config OMAP_SERIAL_WAKE - to data on the serial RX line. This allows you to wake the - system from serial console. - -+source "arch/arm/plat-omap/dss/Kconfig" -+ - endmenu - - endif -diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile -index 1259846..2740497 100644 ---- a/arch/arm/plat-omap/Makefile -+++ b/arch/arm/plat-omap/Makefile -@@ -29,3 +29,5 @@ obj-$(CONFIG_OMAP_MMU_FWK) += mmu.o - # OMAP mailbox framework - obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o - -+# OMAP2/3 Display Subsystem -+obj-y += dss/ -diff --git a/arch/arm/plat-omap/dss/Kconfig b/arch/arm/plat-omap/dss/Kconfig -new file mode 100644 -index 0000000..ef0b5d9 ---- /dev/null -+++ b/arch/arm/plat-omap/dss/Kconfig -@@ -0,0 +1,66 @@ -+config OMAP2_DSS -+ tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" -+ depends on ARCH_OMAP2 || ARCH_OMAP3 -+ help -+ OMAP2/3 Display Subsystem support. -+ -+if OMAP2_DSS -+ -+config OMAP2_DSS_DEBUG -+ bool "Debug output" -+ default n -+ -+config OMAP2_DSS_RFBI -+ bool "RFBI support" -+ default y -+ -+config OMAP2_DSS_VENC -+ bool "VENC support" -+ default y -+ -+if ARCH_OMAP3 -+ -+config OMAP2_DSS_SDI -+ bool "SDI support" -+ default y -+ -+config OMAP2_DSS_DSI -+ bool "DSI support" -+ default y -+ -+endif -+ -+config OMAP2_DSS_USE_DSI_PLL -+ bool "Use DSI PLL for PCLK (EXPERIMENTAL)" -+ default n -+ depends on OMAP2_DSS_DSI -+ help -+ Use DSI PLL to generate pixel clock. -+ Currently only for DPI output. -+ -+config OMAP2_DSS_FAKE_VSYNC -+ bool "Fake VSYNC irq from manual update displays" -+ default n -+ help -+ If this is selected, DSI will fake a DISPC VSYNC interrupt -+ when DSI has sent a frame. -+ -+config OMAP2_DSS_MIN_FCK_PER_PCK -+ int "Minimum FCK/PCK ratio (for scaling)" -+ range 0 32 -+ default 0 -+ help -+ This can be used to adjust the minimum FCK/PCK ratio. -+ -+ With this you can make sure that DISPC FCK is at least -+ n x PCK. Video plane scaling requires higher FCK than -+ normally. -+ -+ If this is set to 0, there's no extra constraint on the -+ DISPC FCK. However, the FCK will at minimum be -+ 2xPCK (if active matrix) or 3xPCK (if passive matrix). -+ -+ Max FCK is 173MHz, so this doesn't work if your PCK -+ is very high. -+ -+endif -diff --git a/arch/arm/plat-omap/dss/Makefile b/arch/arm/plat-omap/dss/Makefile -new file mode 100644 -index 0000000..e98c6c1 ---- /dev/null -+++ b/arch/arm/plat-omap/dss/Makefile -@@ -0,0 +1,6 @@ -+obj-$(CONFIG_OMAP2_DSS) += omap-dss.o -+omap-dss-y := dss.o display.o dispc.o dpi.o -+omap-dss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o -+omap-dss-$(CONFIG_OMAP2_DSS_VENC) += venc.o -+omap-dss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o -+omap-dss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o -diff --git a/arch/arm/plat-omap/dss/dispc.c b/arch/arm/plat-omap/dss/dispc.c -new file mode 100644 -index 0000000..33fbd0a ---- /dev/null -+++ b/arch/arm/plat-omap/dss/dispc.c -@@ -0,0 +1,2021 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/dispc.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#define DSS_SUBSYS_NAME "DISPC" -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+#include "dss.h" -+ -+/* DISPC */ -+#define DISPC_BASE 0x48050400 -+ -+#define DISPC_SZ_REGS SZ_1K -+ -+struct dispc_reg { u16 idx; }; -+ -+#define DISPC_REG(idx) ((const struct dispc_reg) { idx }) -+ -+/* DISPC common */ -+#define DISPC_REVISION DISPC_REG(0x0000) -+#define DISPC_SYSCONFIG DISPC_REG(0x0010) -+#define DISPC_SYSSTATUS DISPC_REG(0x0014) -+#define DISPC_IRQSTATUS DISPC_REG(0x0018) -+#define DISPC_IRQENABLE DISPC_REG(0x001C) -+#define DISPC_CONTROL DISPC_REG(0x0040) -+#define DISPC_CONFIG DISPC_REG(0x0044) -+#define DISPC_CAPABLE DISPC_REG(0x0048) -+#define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C) -+#define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050) -+#define DISPC_TRANS_COLOR0 DISPC_REG(0x0054) -+#define DISPC_TRANS_COLOR1 DISPC_REG(0x0058) -+#define DISPC_LINE_STATUS DISPC_REG(0x005C) -+#define DISPC_LINE_NUMBER DISPC_REG(0x0060) -+#define DISPC_TIMING_H DISPC_REG(0x0064) -+#define DISPC_TIMING_V DISPC_REG(0x0068) -+#define DISPC_POL_FREQ DISPC_REG(0x006C) -+#define DISPC_DIVISOR DISPC_REG(0x0070) -+#define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074) -+#define DISPC_SIZE_DIG DISPC_REG(0x0078) -+#define DISPC_SIZE_LCD DISPC_REG(0x007C) -+ -+/* DISPC GFX plane */ -+#define DISPC_GFX_BA0 DISPC_REG(0x0080) -+#define DISPC_GFX_BA1 DISPC_REG(0x0084) -+#define DISPC_GFX_POSITION DISPC_REG(0x0088) -+#define DISPC_GFX_SIZE DISPC_REG(0x008C) -+#define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0) -+#define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4) -+#define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8) -+#define DISPC_GFX_ROW_INC DISPC_REG(0x00AC) -+#define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0) -+#define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4) -+#define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8) -+ -+#define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4) -+#define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8) -+#define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC) -+ -+#define DISPC_CPR_COEF_R DISPC_REG(0x0220) -+#define DISPC_CPR_COEF_G DISPC_REG(0x0224) -+#define DISPC_CPR_COEF_B DISPC_REG(0x0228) -+ -+#define DISPC_GFX_PRELOAD DISPC_REG(0x022C) -+ -+/* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */ -+#define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx) -+ -+#define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000) -+#define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004) -+#define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008) -+#define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C) -+#define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010) -+#define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014) -+#define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018) -+#define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C) -+#define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020) -+#define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024) -+#define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028) -+#define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C) -+#define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030) -+ -+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ -+#define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8) -+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ -+#define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8) -+/* coef index i = {0, 1, 2, 3, 4} */ -+#define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4) -+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ -+#define DISPC_VID_FIR_COEF_V(n, i) DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4) -+ -+#define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04) -+ -+ -+#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ -+ DISPC_IRQ_OCP_ERR | \ -+ DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ -+ DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ -+ DISPC_IRQ_SYNC_LOST | \ -+ DISPC_IRQ_SYNC_LOST_DIGIT) -+ -+#define DISPC_MAX_NR_ISRS 8 -+ -+static struct { -+ omap_dispc_isr_t isr; -+ void *arg; -+ u32 mask; -+} registered_isr[DISPC_MAX_NR_ISRS]; -+ -+#define REG_GET(idx, start, end) \ -+ FLD_GET(dispc_read_reg(idx), start, end) -+ -+#define REG_FLD_MOD(idx, val, start, end) \ -+ dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) -+ -+static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, -+ DISPC_VID_ATTRIBUTES(0), -+ DISPC_VID_ATTRIBUTES(1) }; -+ -+static struct { -+ void __iomem *base; -+ -+ struct clk *dpll4_m4_ck; -+ -+ spinlock_t irq_lock; -+ -+ u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; -+} dispc; -+ -+static inline void dispc_write_reg(const struct dispc_reg idx, u32 val) -+{ -+ __raw_writel(val, dispc.base + idx.idx); -+} -+ -+static inline u32 dispc_read_reg(const struct dispc_reg idx) -+{ -+ return __raw_readl(dispc.base + idx.idx); -+} -+ -+#define SR(reg) \ -+ dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg) -+#define RR(reg) \ -+ dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)]) -+ -+void dispc_save_context(void) -+{ -+ SR(SYSCONFIG); -+ SR(IRQENABLE); -+ SR(CONTROL); -+ SR(CONFIG); -+ SR(DEFAULT_COLOR0); -+ SR(DEFAULT_COLOR1); -+ SR(TRANS_COLOR0); -+ SR(TRANS_COLOR1); -+ SR(LINE_NUMBER); -+ SR(TIMING_H); -+ SR(TIMING_V); -+ SR(POL_FREQ); -+ SR(DIVISOR); -+ SR(GLOBAL_ALPHA); -+ SR(SIZE_DIG); -+ SR(SIZE_LCD); -+ -+ SR(GFX_BA0); -+ SR(GFX_BA1); -+ SR(GFX_POSITION); -+ SR(GFX_SIZE); -+ SR(GFX_ATTRIBUTES); -+ SR(GFX_FIFO_THRESHOLD); -+ SR(GFX_ROW_INC); -+ SR(GFX_PIXEL_INC); -+ SR(GFX_WINDOW_SKIP); -+ SR(GFX_TABLE_BA); -+ -+ SR(DATA_CYCLE1); -+ SR(DATA_CYCLE2); -+ SR(DATA_CYCLE3); -+ -+ SR(CPR_COEF_R); -+ SR(CPR_COEF_G); -+ SR(CPR_COEF_B); -+ -+ SR(GFX_PRELOAD); -+ -+ /* VID1 */ -+ SR(VID_BA0(0)); -+ SR(VID_BA1(0)); -+ SR(VID_POSITION(0)); -+ SR(VID_SIZE(0)); -+ SR(VID_ATTRIBUTES(0)); -+ SR(VID_FIFO_THRESHOLD(0)); -+ SR(VID_ROW_INC(0)); -+ SR(VID_PIXEL_INC(0)); -+ SR(VID_FIR(0)); -+ SR(VID_PICTURE_SIZE(0)); -+ SR(VID_ACCU0(0)); -+ SR(VID_ACCU1(0)); -+ -+ SR(VID_FIR_COEF_H(0, 0)); -+ SR(VID_FIR_COEF_H(0, 1)); -+ SR(VID_FIR_COEF_H(0, 2)); -+ SR(VID_FIR_COEF_H(0, 3)); -+ SR(VID_FIR_COEF_H(0, 4)); -+ SR(VID_FIR_COEF_H(0, 5)); -+ SR(VID_FIR_COEF_H(0, 6)); -+ SR(VID_FIR_COEF_H(0, 7)); -+ -+ SR(VID_FIR_COEF_HV(0, 0)); -+ SR(VID_FIR_COEF_HV(0, 1)); -+ SR(VID_FIR_COEF_HV(0, 2)); -+ SR(VID_FIR_COEF_HV(0, 3)); -+ SR(VID_FIR_COEF_HV(0, 4)); -+ SR(VID_FIR_COEF_HV(0, 5)); -+ SR(VID_FIR_COEF_HV(0, 6)); -+ SR(VID_FIR_COEF_HV(0, 7)); -+ -+ SR(VID_CONV_COEF(0, 0)); -+ SR(VID_CONV_COEF(0, 1)); -+ SR(VID_CONV_COEF(0, 2)); -+ SR(VID_CONV_COEF(0, 3)); -+ SR(VID_CONV_COEF(0, 4)); -+ -+ SR(VID_FIR_COEF_V(0, 0)); -+ SR(VID_FIR_COEF_V(0, 1)); -+ SR(VID_FIR_COEF_V(0, 2)); -+ SR(VID_FIR_COEF_V(0, 3)); -+ SR(VID_FIR_COEF_V(0, 4)); -+ SR(VID_FIR_COEF_V(0, 5)); -+ SR(VID_FIR_COEF_V(0, 6)); -+ SR(VID_FIR_COEF_V(0, 7)); -+ -+ SR(VID_PRELOAD(0)); -+ -+ /* VID2 */ -+ SR(VID_BA0(1)); -+ SR(VID_BA1(1)); -+ SR(VID_POSITION(1)); -+ SR(VID_SIZE(1)); -+ SR(VID_ATTRIBUTES(1)); -+ SR(VID_FIFO_THRESHOLD(1)); -+ SR(VID_ROW_INC(1)); -+ SR(VID_PIXEL_INC(1)); -+ SR(VID_FIR(1)); -+ SR(VID_PICTURE_SIZE(1)); -+ SR(VID_ACCU0(1)); -+ SR(VID_ACCU1(1)); -+ -+ SR(VID_FIR_COEF_H(1, 0)); -+ SR(VID_FIR_COEF_H(1, 1)); -+ SR(VID_FIR_COEF_H(1, 2)); -+ SR(VID_FIR_COEF_H(1, 3)); -+ SR(VID_FIR_COEF_H(1, 4)); -+ SR(VID_FIR_COEF_H(1, 5)); -+ SR(VID_FIR_COEF_H(1, 6)); -+ SR(VID_FIR_COEF_H(1, 7)); -+ -+ SR(VID_FIR_COEF_HV(1, 0)); -+ SR(VID_FIR_COEF_HV(1, 1)); -+ SR(VID_FIR_COEF_HV(1, 2)); -+ SR(VID_FIR_COEF_HV(1, 3)); -+ SR(VID_FIR_COEF_HV(1, 4)); -+ SR(VID_FIR_COEF_HV(1, 5)); -+ SR(VID_FIR_COEF_HV(1, 6)); -+ SR(VID_FIR_COEF_HV(1, 7)); -+ -+ SR(VID_CONV_COEF(1, 0)); -+ SR(VID_CONV_COEF(1, 1)); -+ SR(VID_CONV_COEF(1, 2)); -+ SR(VID_CONV_COEF(1, 3)); -+ SR(VID_CONV_COEF(1, 4)); -+ -+ SR(VID_FIR_COEF_V(1, 0)); -+ SR(VID_FIR_COEF_V(1, 1)); -+ SR(VID_FIR_COEF_V(1, 2)); -+ SR(VID_FIR_COEF_V(1, 3)); -+ SR(VID_FIR_COEF_V(1, 4)); -+ SR(VID_FIR_COEF_V(1, 5)); -+ SR(VID_FIR_COEF_V(1, 6)); -+ SR(VID_FIR_COEF_V(1, 7)); -+ -+ SR(VID_PRELOAD(1)); -+} -+ -+void dispc_restore_context(void) -+{ -+ RR(SYSCONFIG); -+ RR(IRQENABLE); -+ //RR(CONTROL); -+ RR(CONFIG); -+ RR(DEFAULT_COLOR0); -+ RR(DEFAULT_COLOR1); -+ RR(TRANS_COLOR0); -+ RR(TRANS_COLOR1); -+ RR(LINE_NUMBER); -+ RR(TIMING_H); -+ RR(TIMING_V); -+ RR(POL_FREQ); -+ RR(DIVISOR); -+ RR(GLOBAL_ALPHA); -+ RR(SIZE_DIG); -+ RR(SIZE_LCD); -+ -+ RR(GFX_BA0); -+ RR(GFX_BA1); -+ RR(GFX_POSITION); -+ RR(GFX_SIZE); -+ RR(GFX_ATTRIBUTES); -+ RR(GFX_FIFO_THRESHOLD); -+ RR(GFX_ROW_INC); -+ RR(GFX_PIXEL_INC); -+ RR(GFX_WINDOW_SKIP); -+ RR(GFX_TABLE_BA); -+ -+ RR(DATA_CYCLE1); -+ RR(DATA_CYCLE2); -+ RR(DATA_CYCLE3); -+ -+ RR(CPR_COEF_R); -+ RR(CPR_COEF_G); -+ RR(CPR_COEF_B); -+ -+ RR(GFX_PRELOAD); -+ -+ /* VID1 */ -+ RR(VID_BA0(0)); -+ RR(VID_BA1(0)); -+ RR(VID_POSITION(0)); -+ RR(VID_SIZE(0)); -+ RR(VID_ATTRIBUTES(0)); -+ RR(VID_FIFO_THRESHOLD(0)); -+ RR(VID_ROW_INC(0)); -+ RR(VID_PIXEL_INC(0)); -+ RR(VID_FIR(0)); -+ RR(VID_PICTURE_SIZE(0)); -+ RR(VID_ACCU0(0)); -+ RR(VID_ACCU1(0)); -+ -+ RR(VID_FIR_COEF_H(0, 0)); -+ RR(VID_FIR_COEF_H(0, 1)); -+ RR(VID_FIR_COEF_H(0, 2)); -+ RR(VID_FIR_COEF_H(0, 3)); -+ RR(VID_FIR_COEF_H(0, 4)); -+ RR(VID_FIR_COEF_H(0, 5)); -+ RR(VID_FIR_COEF_H(0, 6)); -+ RR(VID_FIR_COEF_H(0, 7)); -+ -+ RR(VID_FIR_COEF_HV(0, 0)); -+ RR(VID_FIR_COEF_HV(0, 1)); -+ RR(VID_FIR_COEF_HV(0, 2)); -+ RR(VID_FIR_COEF_HV(0, 3)); -+ RR(VID_FIR_COEF_HV(0, 4)); -+ RR(VID_FIR_COEF_HV(0, 5)); -+ RR(VID_FIR_COEF_HV(0, 6)); -+ RR(VID_FIR_COEF_HV(0, 7)); -+ -+ RR(VID_CONV_COEF(0, 0)); -+ RR(VID_CONV_COEF(0, 1)); -+ RR(VID_CONV_COEF(0, 2)); -+ RR(VID_CONV_COEF(0, 3)); -+ RR(VID_CONV_COEF(0, 4)); -+ -+ RR(VID_FIR_COEF_V(0, 0)); -+ RR(VID_FIR_COEF_V(0, 1)); -+ RR(VID_FIR_COEF_V(0, 2)); -+ RR(VID_FIR_COEF_V(0, 3)); -+ RR(VID_FIR_COEF_V(0, 4)); -+ RR(VID_FIR_COEF_V(0, 5)); -+ RR(VID_FIR_COEF_V(0, 6)); -+ RR(VID_FIR_COEF_V(0, 7)); -+ -+ RR(VID_PRELOAD(0)); -+ -+ /* VID2 */ -+ RR(VID_BA0(1)); -+ RR(VID_BA1(1)); -+ RR(VID_POSITION(1)); -+ RR(VID_SIZE(1)); -+ RR(VID_ATTRIBUTES(1)); -+ RR(VID_FIFO_THRESHOLD(1)); -+ RR(VID_ROW_INC(1)); -+ RR(VID_PIXEL_INC(1)); -+ RR(VID_FIR(1)); -+ RR(VID_PICTURE_SIZE(1)); -+ RR(VID_ACCU0(1)); -+ RR(VID_ACCU1(1)); -+ -+ RR(VID_FIR_COEF_H(1, 0)); -+ RR(VID_FIR_COEF_H(1, 1)); -+ RR(VID_FIR_COEF_H(1, 2)); -+ RR(VID_FIR_COEF_H(1, 3)); -+ RR(VID_FIR_COEF_H(1, 4)); -+ RR(VID_FIR_COEF_H(1, 5)); -+ RR(VID_FIR_COEF_H(1, 6)); -+ RR(VID_FIR_COEF_H(1, 7)); -+ -+ RR(VID_FIR_COEF_HV(1, 0)); -+ RR(VID_FIR_COEF_HV(1, 1)); -+ RR(VID_FIR_COEF_HV(1, 2)); -+ RR(VID_FIR_COEF_HV(1, 3)); -+ RR(VID_FIR_COEF_HV(1, 4)); -+ RR(VID_FIR_COEF_HV(1, 5)); -+ RR(VID_FIR_COEF_HV(1, 6)); -+ RR(VID_FIR_COEF_HV(1, 7)); -+ -+ RR(VID_CONV_COEF(1, 0)); -+ RR(VID_CONV_COEF(1, 1)); -+ RR(VID_CONV_COEF(1, 2)); -+ RR(VID_CONV_COEF(1, 3)); -+ RR(VID_CONV_COEF(1, 4)); -+ -+ RR(VID_FIR_COEF_V(1, 0)); -+ RR(VID_FIR_COEF_V(1, 1)); -+ RR(VID_FIR_COEF_V(1, 2)); -+ RR(VID_FIR_COEF_V(1, 3)); -+ RR(VID_FIR_COEF_V(1, 4)); -+ RR(VID_FIR_COEF_V(1, 5)); -+ RR(VID_FIR_COEF_V(1, 6)); -+ RR(VID_FIR_COEF_V(1, 7)); -+ -+ RR(VID_PRELOAD(1)); -+ -+ /* enable last, because LCD & DIGIT enable are here */ -+ RR(CONTROL); -+} -+ -+#undef SR -+#undef RR -+ -+static inline void enable_clocks(int enable) -+{ -+ if (enable) -+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ else -+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); -+} -+ -+void dispc_go(enum omap_channel channel) -+{ -+ int bit; -+ unsigned long tmo; -+ -+ enable_clocks(1); -+ -+ if (channel == OMAP_DSS_CHANNEL_LCD) -+ bit = 0; /* LCDENABLE */ -+ else -+ bit = 1; /* DIGITALENABLE */ -+ -+ /* if the channel is not enabled, we don't need GO */ -+ if (REG_GET(DISPC_CONTROL, bit, bit) == 0) -+ goto end; -+ -+ if (channel == OMAP_DSS_CHANNEL_LCD) -+ bit = 5; /* GOLCD */ -+ else -+ bit = 6; /* GODIGIT */ -+ -+ tmo = jiffies + msecs_to_jiffies(200); -+ while (REG_GET(DISPC_CONTROL, bit, bit) == 1) { -+ if (time_after(jiffies, tmo)) { -+ DSSERR("timeout waiting GO flag\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ -+ DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT"); -+ -+ REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); -+end: -+ enable_clocks(0); -+} -+ -+static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) -+{ -+ BUG_ON(plane == OMAP_DSS_GFX); -+ -+ dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value); -+} -+ -+static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) -+{ -+ BUG_ON(plane == OMAP_DSS_GFX); -+ -+ dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value); -+} -+ -+ -+static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup, -+ int vscaleup) -+{ -+ /* Coefficients for horizontal up-sampling */ -+ const u32 coef_hup[8] = { -+ 0x00800000, -+ 0x0D7CF800, -+ 0x1E70F5FF, -+ 0x335FF5FE, -+ 0xF74949F7, -+ 0xF55F33FB, -+ 0xF5701EFE, -+ 0xF87C0DFF, -+ }; -+ -+ /* Coefficients for horizontal down-sampling */ -+ const u32 coef_hdown[8] = { -+ 0x24382400, -+ 0x28371FFE, -+ 0x2C361BFB, -+ 0x303516F9, -+ 0x11343311, -+ 0x1635300C, -+ 0x1B362C08, -+ 0x1F372804, -+ }; -+ -+ /* Coefficients for horizontal and vertical up-sampling */ -+ const u32 coef_hvup[8] = { -+ 0x00800000, -+ 0x037B02FF, -+ 0x0C6F05FE, -+ 0x205907FB, -+ 0x00404000, -+ 0x075920FE, -+ 0x056F0CFF, -+ 0x027B0300, -+ }; -+ -+ /* Coefficients for horizontal and vertical down-sampling */ -+ const u32 coef_hvdown[8] = { -+ 0x24382400, -+ 0x28391F04, -+ 0x2D381B08, -+ 0x3237170C, -+ 0x123737F7, -+ 0x173732F9, -+ 0x1B382DFB, -+ 0x1F3928FE, -+ }; -+ -+ const u32 *h_coef; -+ const u32 *hv_coef; -+ const u32 *hv_coef_mod; -+ int i; -+ -+ if (hscaleup) -+ h_coef = coef_hup; -+ else -+ h_coef = coef_hdown; -+ -+ if (vscaleup) { -+ hv_coef = coef_hvup; -+ -+ if (hscaleup) -+ hv_coef_mod = NULL; -+ else -+ hv_coef_mod = coef_hvdown; -+ } else { -+ hv_coef = coef_hvdown; -+ -+ if (hscaleup) -+ hv_coef_mod = coef_hvup; -+ else -+ hv_coef_mod = NULL; -+ } -+ -+ for (i = 0; i < 8; i++) { -+ u32 h, hv; -+ -+ h = h_coef[i]; -+ -+ hv = hv_coef[i]; -+ -+ if (hv_coef_mod) { -+ hv &= 0xffffff00; -+ hv |= (hv_coef_mod[i] & 0xff); -+ } -+ -+ _dispc_write_firh_reg(plane, i, h); -+ _dispc_write_firhv_reg(plane, i, hv); -+ } -+} -+ -+static void _dispc_setup_color_conv_coef(void) -+{ -+ const struct color_conv_coef { -+ int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; -+ int full_range; -+ } ctbl_bt601_5 = { -+ 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, -+ }; -+ -+ const struct color_conv_coef *ct; -+ -+#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) -+ -+ ct = &ctbl_bt601_5; -+ -+ dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry)); -+ dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb)); -+ dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr)); -+ dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by)); -+ dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb)); -+ -+ dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry)); -+ dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb)); -+ dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr)); -+ dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by)); -+ dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb)); -+ -+#undef CVAL -+ -+ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11); -+ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11); -+} -+ -+ -+static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) -+{ -+ const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0, -+ DISPC_VID_BA0(0), -+ DISPC_VID_BA0(1) }; -+ -+ dispc_write_reg(ba0_reg[plane], paddr); -+} -+ -+static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) -+{ -+ const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1, -+ DISPC_VID_BA1(0), -+ DISPC_VID_BA1(1) }; -+ -+ dispc_write_reg(ba1_reg[plane], paddr); -+} -+ -+static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) -+{ -+ const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION, -+ DISPC_VID_POSITION(0), -+ DISPC_VID_POSITION(1) }; -+ -+ u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); -+ dispc_write_reg(pos_reg[plane], val); -+} -+ -+static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) -+{ -+ const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE, -+ DISPC_VID_PICTURE_SIZE(0), -+ DISPC_VID_PICTURE_SIZE(1) }; -+ u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); -+ dispc_write_reg(siz_reg[plane], val); -+} -+ -+static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) -+{ -+ u32 val; -+ const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0), -+ DISPC_VID_SIZE(1) }; -+ -+ BUG_ON(plane == OMAP_DSS_GFX); -+ -+ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); -+ dispc_write_reg(vsi_reg[plane-1], val); -+} -+ -+static void _dispc_set_row_inc(enum omap_plane plane, int inc) -+{ -+ const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, -+ DISPC_VID_ROW_INC(0), -+ DISPC_VID_ROW_INC(1) }; -+ -+ dispc_write_reg(ri_reg[plane], inc); -+} -+ -+static void _dispc_set_color_mode(enum omap_plane plane, -+ enum omap_color_mode color_mode) -+{ -+ u32 m = 0; -+ -+ switch (color_mode) { -+ case OMAP_DSS_COLOR_CLUT1: -+ m = 0x0; break; -+ case OMAP_DSS_COLOR_CLUT2: -+ m = 0x1; break; -+ case OMAP_DSS_COLOR_CLUT4: -+ m = 0x2; break; -+ case OMAP_DSS_COLOR_CLUT8: -+ m = 0x3; break; -+ case OMAP_DSS_COLOR_RGB12U: -+ m = 0x4; break; -+ case OMAP_DSS_COLOR_ARGB16: -+ m = 0x5; break; -+ case OMAP_DSS_COLOR_RGB16: -+ m = 0x6; break; -+ case OMAP_DSS_COLOR_RGB24U: -+ m = 0x8; break; -+ case OMAP_DSS_COLOR_RGB24P: -+ m = 0x9; break; -+ case OMAP_DSS_COLOR_YUV2: -+ m = 0xa; break; -+ case OMAP_DSS_COLOR_UYVY: -+ m = 0xb; break; -+ case OMAP_DSS_COLOR_ARGB32: -+ m = 0xc; break; -+ case OMAP_DSS_COLOR_RGBA32: -+ m = 0xd; break; -+ case OMAP_DSS_COLOR_RGBX32: -+ m = 0xe; break; -+ default: -+ BUG(); break; -+ } -+ -+ REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1); -+} -+ -+static void _dispc_set_channel_out(enum omap_plane plane, -+ enum omap_channel channel) -+{ -+ int shift; -+ u32 val; -+ -+ switch (plane) { -+ case OMAP_DSS_GFX: -+ shift = 8; -+ break; -+ case OMAP_DSS_VIDEO1: -+ case OMAP_DSS_VIDEO2: -+ shift = 16; -+ break; -+ default: -+ BUG(); -+ return; -+ } -+ -+ val = dispc_read_reg(dispc_reg_att[plane]); -+ val = FLD_MOD(val, channel, shift, shift); -+ dispc_write_reg(dispc_reg_att[plane], val); -+} -+ -+static void _dispc_set_burst_size(enum omap_plane plane, -+ enum omap_burst_size burst_size) -+{ -+ int shift; -+ u32 val; -+ -+ switch (plane) { -+ case OMAP_DSS_GFX: -+ shift = 6; -+ break; -+ case OMAP_DSS_VIDEO1: -+ case OMAP_DSS_VIDEO2: -+ shift = 14; -+ break; -+ default: -+ BUG(); -+ return; -+ } -+ -+ val = dispc_read_reg(dispc_reg_att[plane]); -+ val = FLD_MOD(val, burst_size, shift+1, shift); -+ dispc_write_reg(dispc_reg_att[plane], val); -+} -+ -+static void _dispc_set_vid_color_conv(enum omap_plane plane, int enable) -+{ -+ u32 val; -+ -+ BUG_ON(plane == OMAP_DSS_GFX); -+ -+ val = dispc_read_reg(dispc_reg_att[plane]); -+ val = FLD_MOD(val, enable, 9, 9); -+ dispc_write_reg(dispc_reg_att[plane], val); -+} -+ -+void dispc_set_lcd_size(int width, int height) -+{ -+ u32 val; -+ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); -+ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); -+ enable_clocks(1); -+ dispc_write_reg(DISPC_SIZE_LCD, val); -+ enable_clocks(0); -+} -+ -+void dispc_set_digit_size(int width, int height) -+{ -+ u32 val; -+ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); -+ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); -+ enable_clocks(1); -+ dispc_write_reg(DISPC_SIZE_DIG, val); -+ enable_clocks(0); -+} -+ -+void dispc_setup_plane_fifo(enum omap_plane plane, int ext_mode) -+{ -+ const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, -+ DISPC_VID_FIFO_THRESHOLD(0), -+ DISPC_VID_FIFO_THRESHOLD(1) }; -+ const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, -+ DISPC_VID_FIFO_SIZE_STATUS(0), -+ DISPC_VID_FIFO_SIZE_STATUS(1) }; -+ int low, high; -+ u32 size; -+ -+ enable_clocks(1); -+ -+ if (cpu_is_omap24xx()) -+ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); -+ else if (cpu_is_omap34xx()) -+ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); -+ else -+ BUG(); -+ -+ if (ext_mode) { -+ low = size * 3 / 4; -+ high = size; -+ } else { -+ low = size / 4; -+ high = size * 3 / 4; -+ } -+ -+ if (cpu_is_omap24xx()) -+ dispc_write_reg(ftrs_reg[plane], -+ FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0)); -+ else -+ dispc_write_reg(ftrs_reg[plane], -+ FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0)); -+ -+ enable_clocks(0); -+} -+ -+static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) -+{ -+ u32 val; -+ const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0), -+ DISPC_VID_FIR(1) }; -+ -+ BUG_ON(plane == OMAP_DSS_GFX); -+ -+ val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); -+ dispc_write_reg(fir_reg[plane-1], val); -+} -+ -+static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) -+{ -+ u32 val; -+ const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0), -+ DISPC_VID_ACCU0(1) }; -+ -+ BUG_ON(plane == OMAP_DSS_GFX); -+ -+ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); -+ dispc_write_reg(ac0_reg[plane-1], val); -+} -+ -+static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) -+{ -+ u32 val; -+ const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0), -+ DISPC_VID_ACCU1(1) }; -+ -+ BUG_ON(plane == OMAP_DSS_GFX); -+ -+ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); -+ dispc_write_reg(ac1_reg[plane-1], val); -+} -+ -+ -+static void _dispc_set_scaling(enum omap_plane plane, -+ int orig_width, int orig_height, -+ int out_width, int out_height, -+ int ilace) -+{ -+ int fir_hinc; -+ int fir_vinc; -+ int hscaleup, vscaleup; -+ int fieldmode = 0; -+ int accu0 = 0; -+ int accu1 = 0; -+ u32 l; -+ -+ BUG_ON(plane == OMAP_DSS_GFX); -+ -+ hscaleup = orig_width <= out_width; -+ vscaleup = orig_height <= out_height; -+ -+ _dispc_set_scale_coef(plane, hscaleup, vscaleup); -+ -+ if (!orig_width || orig_width == out_width) -+ fir_hinc = 0; -+ else -+ fir_hinc = 1024 * orig_width / out_width; -+ -+ if (!orig_height || orig_height == out_height) -+ fir_vinc = 0; -+ else -+ fir_vinc = 1024 * orig_height / out_height; -+ -+ _dispc_set_fir(plane, fir_hinc, fir_vinc); -+ -+ l = dispc_read_reg(dispc_reg_att[plane]); -+ l &= ~(0x0f << 5); -+ -+ l |= fir_hinc ? (1 << 5) : 0; -+ l |= fir_vinc ? (1 << 6) : 0; -+ -+ l |= hscaleup ? 0 : (1 << 7); -+ l |= vscaleup ? 0 : (1 << 8); -+ -+ dispc_write_reg(dispc_reg_att[plane], l); -+ -+ if (ilace) { -+ if (fieldmode) { -+ accu0 = fir_vinc / 2; -+ accu1 = 0; -+ } else { -+ accu0 = 0; -+ accu1 = fir_vinc / 2; -+ if (accu1 >= 1024/2) { -+ accu0 = 1024/2; -+ accu1 -= accu0; -+ } -+ } -+ } -+ -+ _dispc_set_vid_accu0(plane, 0, accu0); -+ _dispc_set_vid_accu1(plane, 0, accu1); -+} -+ -+static int _dispc_setup_plane(enum omap_plane plane, -+ enum omap_channel channel_out, -+ u32 paddr, int screen_width, -+ int pos_x, int pos_y, -+ int width, int height, -+ int out_width, int out_height, -+ enum omap_color_mode color_mode, -+ int ilace) -+{ -+ int fieldmode = 0; -+ int bpp; -+ int cconv; -+ int scaling = 0; -+ -+ if (plane == OMAP_DSS_GFX) { -+ if (width != out_width || height != out_height) -+ return -EINVAL; -+ } else { -+ /* video plane */ -+ if (width != out_width || height != out_height) -+ scaling = 1; -+ -+ if (out_width < width/2 || -+ out_width > width*8) -+ return -EINVAL; -+ -+ if (out_height < height/2 || -+ out_height > height*8) -+ return -EINVAL; -+ } -+ -+ -+ switch (color_mode) { -+ case OMAP_DSS_COLOR_RGB16: -+ bpp = 16; -+ cconv = 0; -+ break; -+ -+ case OMAP_DSS_COLOR_RGB24P: -+ bpp = 24; -+ cconv = 0; -+ break; -+ -+ case OMAP_DSS_COLOR_RGB24U: -+ bpp = 32; -+ cconv = 0; -+ break; -+ -+ case OMAP_DSS_COLOR_YUV2: -+ case OMAP_DSS_COLOR_UYVY: -+ BUG_ON(plane == OMAP_DSS_GFX); -+ bpp = 16; -+ cconv = 1; -+ break; -+ -+ default: -+ BUG(); -+ return 1; -+ } -+ -+ if (ilace) { -+ if (height == out_height || height > out_height) -+ fieldmode = 1; -+ } -+ -+ if (fieldmode) -+ height /= 2; -+ -+ if (ilace) -+ out_height /= 2; -+ -+ if (plane != OMAP_DSS_GFX) -+ _dispc_set_scaling(plane, width, height, -+ out_width, out_height, -+ ilace); -+ -+ /* attributes */ -+ _dispc_set_channel_out(plane, channel_out); -+ _dispc_set_color_mode(plane, color_mode); -+ if (plane != OMAP_DSS_GFX) -+ _dispc_set_vid_color_conv(plane, cconv); -+ -+ /* */ -+ -+ _dispc_set_plane_ba0(plane, paddr); -+ -+ if (fieldmode) -+ _dispc_set_plane_ba1(plane, paddr + screen_width * bpp/8); -+ else -+ _dispc_set_plane_ba1(plane, paddr); -+ -+ -+ _dispc_set_plane_pos(plane, pos_x, pos_y); -+ -+ _dispc_set_pic_size(plane, width, height); -+ -+ if (plane != OMAP_DSS_GFX) -+ _dispc_set_vid_size(plane, out_width, out_height); -+ -+ _dispc_set_row_inc(plane, -+ (screen_width - width) * bpp / 8 + -+ (fieldmode ? screen_width * bpp / 8 : 0) + -+ 1); -+ -+ return 0; -+} -+ -+static void _dispc_enable_plane(enum omap_plane plane, int enable) -+{ -+ REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0); -+} -+ -+ -+void dispc_enable_lcd_out(int enable) -+{ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); -+ enable_clocks(0); -+} -+ -+void dispc_enable_digit_out(int enable) -+{ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); -+ enable_clocks(0); -+} -+ -+void dispc_lcd_enable_signal_polarity(int act_high) -+{ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); -+ enable_clocks(0); -+} -+ -+void dispc_lcd_enable_signal(int enable) -+{ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); -+ enable_clocks(0); -+} -+ -+void dispc_pck_free_enable(int enable) -+{ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); -+ enable_clocks(0); -+} -+ -+void dispc_enable_fifohandcheck(int enable) -+{ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); -+ enable_clocks(0); -+} -+ -+ -+void dispc_set_lcd_display_type(enum omap_lcd_display_type type) -+{ -+ int mode; -+ -+ switch (type) { -+ case OMAP_DSS_LCD_DISPLAY_STN: -+ mode = 0; -+ break; -+ -+ case OMAP_DSS_LCD_DISPLAY_TFT: -+ mode = 1; -+ break; -+ -+ default: -+ BUG(); -+ return; -+ } -+ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); -+ enable_clocks(0); -+} -+ -+void dispc_set_loadmode(enum omap_dss_load_mode mode) -+{ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); -+ enable_clocks(0); -+} -+ -+ -+void omap_dispc_set_default_color(enum omap_channel channel, u32 color) -+{ -+ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, -+ DISPC_DEFAULT_COLOR1 }; -+ -+ enable_clocks(1); -+ dispc_write_reg(def_reg[channel], color); -+ enable_clocks(0); -+} -+ -+void omap_dispc_set_trans_key(enum omap_channel ch, -+ enum omap_dss_color_key_type type, -+ u32 trans_key) -+{ -+ const struct dispc_reg tr_reg[] = { -+ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; -+ -+ enable_clocks(1); -+ if (ch == OMAP_DSS_CHANNEL_LCD) -+ REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); -+ else /* OMAP_DSS_CHANNEL_DIGIT */ -+ REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); -+ -+ dispc_write_reg(tr_reg[ch], trans_key); -+ enable_clocks(0); -+} -+ -+void omap_dispc_enable_trans_key(enum omap_channel ch, int enable) -+{ -+ enable_clocks(1); -+ if (ch == OMAP_DSS_CHANNEL_LCD) -+ REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); -+ else /* OMAP_DSS_CHANNEL_DIGIT */ -+ REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); -+ enable_clocks(0); -+} -+ -+void dispc_set_tft_data_lines(int data_lines) -+{ -+ int code; -+ -+ switch (data_lines) { -+ case 12: -+ code = 0; -+ break; -+ case 16: -+ code = 1; -+ break; -+ case 18: -+ code = 2; -+ break; -+ case 24: -+ code = 3; -+ break; -+ default: -+ BUG(); -+ return; -+ } -+ -+ enable_clocks(1); -+ REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); -+ enable_clocks(0); -+} -+ -+void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode) -+{ -+ u32 l; -+ int stallmode; -+ int gpout0 = 1; -+ int gpout1; -+ -+ switch (mode) { -+ case OMAP_DSS_PARALLELMODE_BYPASS: -+ stallmode = 0; -+ gpout1 = 1; -+ break; -+ -+ case OMAP_DSS_PARALLELMODE_RFBI: -+ stallmode = 1; -+ gpout1 = 0; -+ break; -+ -+ case OMAP_DSS_PARALLELMODE_DSI: -+ stallmode = 1; -+ gpout1 = 1; -+ break; -+ -+ default: -+ BUG(); -+ return; -+ } -+ -+ enable_clocks(1); -+ -+ l = dispc_read_reg(DISPC_CONTROL); -+ -+ l = FLD_MOD(l, stallmode, 11, 11); -+ l = FLD_MOD(l, gpout0, 15, 15); -+ l = FLD_MOD(l, gpout1, 16, 16); -+ -+ dispc_write_reg(DISPC_CONTROL, l); -+ -+ enable_clocks(0); -+} -+ -+static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp, -+ int vsw, int vfp, int vbp) -+{ -+ u32 timing_h, timing_v; -+ -+ BUG_ON(hsw < 1 || hsw > 64); -+ BUG_ON(hfp < 1 || hfp > 256); -+ BUG_ON(hbp < 1 || hbp > 256); -+ -+ BUG_ON(vsw < 1 || vsw > 64); -+ BUG_ON(vfp < 0 || vfp > 255); -+ BUG_ON(vbp < 0 || vbp > 255); -+ -+ timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | -+ FLD_VAL(hbp-1, 27, 20); -+ -+ timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | -+ FLD_VAL(vbp, 27, 20); -+ -+ enable_clocks(1); -+ dispc_write_reg(DISPC_TIMING_H, timing_h); -+ dispc_write_reg(DISPC_TIMING_V, timing_v); -+ enable_clocks(0); -+} -+ -+void dispc_set_lcd_timings(struct omap_video_timings *timings) -+{ -+ _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp, -+ timings->vsw, timings->vfp, timings->vbp); -+} -+ -+void dispc_set_lcd_divisor(int lck_div, int pck_div) -+{ -+ BUG_ON(lck_div < 1); -+ BUG_ON(pck_div < 2); -+ -+ enable_clocks(1); -+ dispc_write_reg(DISPC_DIVISOR, -+ FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); -+ enable_clocks(0); -+} -+ -+static void dispc_get_lcd_divisor(int *lck_div, int *pck_div) -+{ -+ u32 l; -+ l = dispc_read_reg(DISPC_DIVISOR); -+ *lck_div = FLD_GET(l, 23, 16); -+ *pck_div = FLD_GET(l, 7, 0); -+} -+ -+unsigned long dispc_fclk_rate(void) -+{ -+ unsigned long r = 0; -+ -+ if (dss_get_dispc_clk_source() == 0) -+ r = dss_clk_get_rate(DSS_CLK_FCK1); -+ else -+#ifdef CONFIG_OMAP2_DSS_DSI -+ r = dsi_get_dsi1_pll_rate(); -+#else -+ BUG(); -+#endif -+ return r; -+} -+ -+unsigned long dispc_pclk_rate(void) -+{ -+ int lcd, pcd; -+ unsigned long r; -+ u32 l; -+ -+ l = dispc_read_reg(DISPC_DIVISOR); -+ -+ lcd = FLD_GET(l, 23, 16); -+ pcd = FLD_GET(l, 7, 0); -+ -+ r = dispc_fclk_rate(); -+ -+ return r / lcd / pcd; -+} -+ -+ssize_t dispc_print_clocks(char *buf, ssize_t size) -+{ -+ ssize_t l = 0; -+ int lcd, pcd; -+ -+ enable_clocks(1); -+ -+ dispc_get_lcd_divisor(&lcd, &pcd); -+ -+ l += snprintf(buf + l, size - l, "- dispc -\n"); -+ -+ l += snprintf(buf + l, size - l, "dispc fclk source = %s\n", -+ dss_get_dispc_clk_source() == 0 ? -+ "dss1_alwon_fclk" : "dsi1_pll_fclk"); -+ -+ l += snprintf(buf + l, size - l, -+ "pixel clk = %lu / %d / %d = %lu\n", -+ dispc_fclk_rate(), -+ lcd, pcd, -+ dispc_pclk_rate()); -+ -+ enable_clocks(0); -+ -+ return l; -+} -+ -+static void _dispc_set_pol_freq(int onoff, int rf, int ieo, int ipc, -+ int ihs, int ivs, int acbi, int acb) -+{ -+ u32 l = 0; -+ -+ DSSDBG("polfreq ihs %d, ivs %d, acb %d\n", ihs, ivs, acb); -+ -+ l |= FLD_VAL(onoff, 17, 17); -+ l |= FLD_VAL(rf, 16, 16); -+ l |= FLD_VAL(ieo, 15, 15); -+ l |= FLD_VAL(ipc, 14, 14); -+ l |= FLD_VAL(ihs, 13, 13); -+ l |= FLD_VAL(ivs, 12, 12); -+ l |= FLD_VAL(acbi, 11, 8); -+ l |= FLD_VAL(acb, 7, 0); -+ -+ enable_clocks(1); -+ dispc_write_reg(DISPC_POL_FREQ, l); -+ enable_clocks(0); -+} -+ -+void dispc_set_pol_freq(struct omap_panel *panel) -+{ -+ _dispc_set_pol_freq((panel->config & OMAP_DSS_LCD_ONOFF) != 0, -+ (panel->config & OMAP_DSS_LCD_RF) != 0, -+ (panel->config & OMAP_DSS_LCD_IEO) != 0, -+ (panel->config & OMAP_DSS_LCD_IPC) != 0, -+ (panel->config & OMAP_DSS_LCD_IHS) != 0, -+ (panel->config & OMAP_DSS_LCD_IVS) != 0, -+ panel->acbi, panel->acb); -+} -+ -+void find_lck_pck_divs(int is_tft, unsigned long req_pck, unsigned long fck, -+ int *lck_div, int *pck_div) -+{ -+ int pcd_min = is_tft ? 2 : 3; -+ unsigned long best_pck; -+ int best_ld, cur_ld; -+ int best_pd, cur_pd; -+ -+ best_pck = 0; -+ best_ld = 0; -+ best_pd = 0; -+ -+ for (cur_ld = 1; cur_ld <= 255; ++cur_ld) { -+ unsigned long lck = fck / cur_ld; -+ -+ for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) { -+ unsigned long pck = lck / cur_pd; -+ long old_delta = abs(best_pck - req_pck); -+ long new_delta = abs(pck - req_pck); -+ -+ if (best_pck == 0 || new_delta < old_delta) { -+ best_pck = pck; -+ best_ld = cur_ld; -+ best_pd = cur_pd; -+ -+ if (pck == req_pck) -+ goto found; -+ } -+ -+ if (pck < req_pck) -+ break; -+ } -+ -+ if (lck / pcd_min < req_pck) -+ break; -+ } -+ -+found: -+ *lck_div = best_ld; -+ *pck_div = best_pd; -+} -+ -+int dispc_calc_clock_div(int is_tft, unsigned long req_pck, -+ struct dispc_clock_info *cinfo) -+{ -+ unsigned long prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); -+ struct dispc_clock_info cur, best; -+ int match = 0; -+ int min_fck_per_pck; -+ -+ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; -+ -+ if (min_fck_per_pck && -+ req_pck * min_fck_per_pck > DISPC_MAX_FCK) { -+ DSSERR("Requested pixel clock not possible with the current " -+ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " -+ "the constraint off.\n"); -+ min_fck_per_pck = 0; -+ } -+ -+retry: -+ memset(&cur, 0, sizeof(cur)); -+ memset(&best, 0, sizeof(best)); -+ -+ for (cur.fck_div = 16; cur.fck_div > 0; --cur.fck_div) { -+ cur.fck = prate / cur.fck_div * 2; -+ -+ if (cur.fck > DISPC_MAX_FCK) -+ continue; -+ -+ if (min_fck_per_pck && -+ cur.fck < req_pck * min_fck_per_pck) -+ continue; -+ -+ match = 1; -+ -+ find_lck_pck_divs(is_tft, req_pck, cur.fck, -+ &cur.lck_div, &cur.pck_div); -+ -+ cur.lck = cur.fck / cur.lck_div; -+ cur.pck = cur.lck / cur.pck_div; -+ -+ if (abs(cur.pck - req_pck) < abs(best.pck - req_pck)) { -+ best = cur; -+ -+ if (cur.pck == req_pck) -+ goto found; -+ } -+ } -+ -+found: -+ if (!match) { -+ if (min_fck_per_pck) { -+ DSSERR("Could not find suitable clock settings.\n" -+ "Turning FCK/PCK constraint off and" -+ "trying again.\n"); -+ min_fck_per_pck = 0; -+ goto retry; -+ } -+ -+ DSSERR("Could not find suitable clock settings.\n"); -+ -+ return -EINVAL; -+ } -+ -+ if (cinfo) -+ *cinfo = best; -+ -+ return 0; -+} -+ -+int dispc_set_clock_div(struct dispc_clock_info *cinfo) -+{ -+ unsigned long prate; -+ int r; -+ -+ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); -+ -+ r = clk_set_rate(dispc.dpll4_m4_ck, prate / cinfo->fck_div); -+ -+ if (r) -+ return r; -+ -+ dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div); -+ -+ DSSDBG("dpll4_m4 = %ld\n", prate); -+ DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div); -+ DSSDBG("lck = %ld (%d)\n", cinfo->lck, cinfo->lck_div); -+ DSSDBG("pck = %ld (%d)\n", cinfo->pck, cinfo->pck_div); -+ -+ return 0; -+} -+ -+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) -+{ -+ int i; -+ int ret = -EBUSY; -+ unsigned long flags; -+ u32 new_mask = 0; -+ -+ if (isr == NULL) -+ return -EINVAL; -+ -+ spin_lock_irqsave(&dispc.irq_lock, flags); -+ -+ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { -+ if (registered_isr[i].isr == isr) { -+ ret = -EINVAL; -+ break; -+ } -+ -+ if (registered_isr[i].isr != NULL) -+ continue; -+ -+ registered_isr[i].isr = isr; -+ registered_isr[i].arg = arg; -+ registered_isr[i].mask = mask; -+ -+ enable_clocks(1); -+ new_mask = dispc_read_reg(DISPC_IRQENABLE); -+ new_mask |= mask; -+ dispc_write_reg(DISPC_IRQENABLE, new_mask); -+ enable_clocks(0); -+ -+ ret = 0; -+ break; -+ } -+ -+ spin_unlock_irqrestore(&dispc.irq_lock, flags); -+ -+ return ret; -+} -+EXPORT_SYMBOL(omap_dispc_register_isr); -+ -+int omap_dispc_unregister_isr(omap_dispc_isr_t isr) -+{ -+ int i, j; -+ unsigned long flags; -+ u32 new_mask = DISPC_IRQ_MASK_ERROR; -+ int ret = -EINVAL; -+ -+ spin_lock_irqsave(&dispc.irq_lock, flags); -+ -+ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { -+ if (registered_isr[i].isr != isr) -+ continue; -+ -+ registered_isr[i].isr = NULL; -+ registered_isr[i].arg = NULL; -+ registered_isr[i].mask = 0; -+ -+ for (j = 0; j < DISPC_MAX_NR_ISRS; j++) -+ new_mask |= registered_isr[j].mask; -+ -+ enable_clocks(1); -+ dispc_write_reg(DISPC_IRQENABLE, new_mask); -+ enable_clocks(0); -+ -+ ret = 0; -+ break; -+ } -+ -+ spin_unlock_irqrestore(&dispc.irq_lock, flags); -+ -+ return ret; -+} -+EXPORT_SYMBOL(omap_dispc_unregister_isr); -+ -+#ifdef DEBUG -+static void print_irq_status(u32 status) -+{ -+ if ((status & DISPC_IRQ_MASK_ERROR) == 0) -+ return; -+ -+ printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); -+ -+#define PIS(x) \ -+ if (status & DISPC_IRQ_##x) \ -+ printk(#x " "); -+ PIS(GFX_FIFO_UNDERFLOW); -+ PIS(OCP_ERR); -+ PIS(VID1_FIFO_UNDERFLOW); -+ PIS(VID2_FIFO_UNDERFLOW); -+ PIS(SYNC_LOST); -+ PIS(SYNC_LOST_DIGIT); -+#undef PIS -+ -+ printk("\n"); -+} -+#endif -+ -+/* called from dss */ -+void dispc_irq_handler(void) -+{ -+ int i; -+ u32 irqstatus = dispc_read_reg(DISPC_IRQSTATUS); -+ static int errors; -+ u32 handledirqs = 0; -+ -+#ifdef DEBUG -+ print_irq_status(irqstatus); -+#endif -+ -+ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { -+ if (!registered_isr[i].isr) -+ continue; -+ if (registered_isr[i].mask & irqstatus) { -+ registered_isr[i].isr(registered_isr[i].arg, -+ irqstatus); -+ handledirqs |= registered_isr[i].mask; -+ } -+ } -+ -+ if (irqstatus & ~handledirqs & DISPC_IRQ_MASK_ERROR) { -+ if (printk_ratelimit()) { -+ DSSERR("dispc irq error status %04x\n", -+ irqstatus); -+ } -+ if (errors++ > 100) { -+ DSSERR("Excessive DISPC errors\n" -+ "Turning off lcd and digit\n"); -+ dispc_enable_lcd_out(0); -+ dispc_enable_digit_out(0); -+ } -+ } -+ -+ /* ack the interrupt */ -+ dispc_write_reg(DISPC_IRQSTATUS, irqstatus); -+} -+ -+#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC -+void dispc_fake_vsync_irq(void) -+{ -+ u32 irqstatus = DISPC_IRQ_VSYNC; -+ int i; -+ -+ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { -+ if (!registered_isr[i].isr) -+ continue; -+ if (registered_isr[i].mask & irqstatus) -+ registered_isr[i].isr(registered_isr[i].arg, -+ irqstatus); -+ } -+} -+#endif -+ -+static void _omap_dispc_initialize_irq(void) -+{ -+ memset(registered_isr, 0, sizeof(registered_isr)); -+ -+ /* there's SYNC_LOST_DIGIT waiting after enabling the DSS, -+ * so clear it */ -+ dispc_write_reg(DISPC_IRQSTATUS, -+ dispc_read_reg(DISPC_IRQSTATUS)); -+ -+ /* We'll handle these always */ -+ dispc_write_reg(DISPC_IRQENABLE, DISPC_IRQ_MASK_ERROR); -+} -+ -+static void _omap_dispc_initial_config(void) -+{ -+ u32 l; -+ -+ l = dispc_read_reg(DISPC_SYSCONFIG); -+ l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */ -+ l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */ -+ l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */ -+ l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */ -+ dispc_write_reg(DISPC_SYSCONFIG, l); -+ -+ /* FUNCGATED */ -+ REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); -+ -+ /* L3 firewall setting: enable access to OCM RAM */ -+ __raw_writel(0x402000b0, IO_ADDRESS(0x680050a0)); -+ -+ _dispc_set_burst_size(OMAP_DSS_GFX, OMAP_DSS_BURST_16x32); -+ _dispc_set_burst_size(OMAP_DSS_VIDEO1, OMAP_DSS_BURST_16x32); -+ _dispc_set_burst_size(OMAP_DSS_VIDEO2, OMAP_DSS_BURST_16x32); -+ -+ _dispc_setup_color_conv_coef(); -+ -+ dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); -+ -+ /* Set logic clock to fck, pixel clock to fck/2 for now */ -+ dispc_set_lcd_divisor(1, 2); -+ -+ dispc_setup_plane_fifo(OMAP_DSS_GFX, 0); -+ dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, 0); -+ dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, 0); -+} -+ -+int dispc_init(void) -+{ -+ u32 rev; -+ -+ spin_lock_init(&dispc.irq_lock); -+ -+ dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS); -+ if (!dispc.base) { -+ DSSERR("can't ioremap DISPC\n"); -+ return -ENOMEM; -+ } -+ -+ dispc.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck"); -+ if (IS_ERR(dispc.dpll4_m4_ck)) { -+ DSSERR("Failed to get dpll4_m4_ck\n"); -+ return -ENODEV; -+ } -+ -+ enable_clocks(1); -+ -+ _omap_dispc_initial_config(); -+ -+ _omap_dispc_initialize_irq(); -+ -+ dispc_save_context(); -+ -+ rev = dispc_read_reg(DISPC_REVISION); -+ printk(KERN_INFO "OMAP DISPC rev %d.%d\n", -+ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); -+ -+ enable_clocks(0); -+ -+ return 0; -+} -+ -+void dispc_exit(void) -+{ -+ clk_put(dispc.dpll4_m4_ck); -+ iounmap(dispc.base); -+} -+ -+int dispc_enable_plane(enum omap_plane plane, int enable) -+{ -+ DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); -+ -+ enable_clocks(1); -+ _dispc_enable_plane(plane, enable); -+ enable_clocks(0); -+ -+ return 0; -+} -+ -+int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, -+ u32 paddr, int screen_width, -+ int pos_x, int pos_y, -+ int width, int height, -+ int out_width, int out_height, -+ enum omap_color_mode color_mode, -+ int ilace) -+{ -+ int r = 0; -+ -+ DSSDBG("dispc_setup_plane %d, %x, sw %d, %d,%d, %dx%d -> " -+ "%dx%d, (ilace %d)\n", -+ plane, paddr, screen_width, pos_x, pos_y, -+ width, height, -+ out_width, out_height, -+ ilace); -+ -+ enable_clocks(1); -+ -+ r = _dispc_setup_plane(plane, channel_out, -+ paddr, screen_width, -+ pos_x, pos_y, -+ width, height, -+ out_width, out_height, -+ color_mode, ilace); -+ -+ enable_clocks(0); -+ -+ return r; -+} -+ -+static int dispc_is_intersecting(int x1, int y1, int w1, int h1, -+ int x2, int y2, int w2, int h2) -+{ -+ if (x1 >= (x2+w2)) -+ return 0; -+ -+ if ((x1+w1) <= x2) -+ return 0; -+ -+ if (y1 >= (y2+h2)) -+ return 0; -+ -+ if ((y1+h1) <= y2) -+ return 0; -+ -+ return 1; -+} -+ -+static int dispc_is_overlay_scaled(struct omap_overlay_info *pi) -+{ -+ if (pi->width != pi->out_width) -+ return 1; -+ -+ if (pi->height != pi->out_height) -+ return 1; -+ -+ return 0; -+} -+ -+/* returns the area that needs updating */ -+void dispc_setup_partial_planes(struct omap_display *display, -+ int *xi, int *yi, int *wi, int *hi) -+{ -+ struct omap_overlay_manager *mgr; -+ int i; -+ -+ int x, y, w, h; -+ -+ x = *xi; -+ y = *yi; -+ w = *wi; -+ h = *hi; -+ -+ DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n", -+ *xi, *yi, *wi, *hi); -+ -+ -+ mgr = display->manager; -+ -+ if (!mgr) { -+ DSSDBG("no manager\n"); -+ return; -+ } -+ -+ for (i = 0; i < mgr->num_overlays; i++) { -+ struct omap_overlay *ovl; -+ struct omap_overlay_info *pi; -+ ovl = &mgr->overlays[i]; -+ -+ if (ovl->manager != mgr) -+ continue; -+ -+ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) -+ continue; -+ -+ pi = &ovl->info; -+ -+ if (!pi->enabled) -+ continue; -+ /* -+ * If the plane is intersecting and scaled, we -+ * enlarge the update region to accomodate the -+ * whole area -+ */ -+ -+ if (dispc_is_intersecting(x, y, w, h, -+ pi->pos_x, pi->pos_y, -+ pi->out_width, pi->out_height)) { -+ if (dispc_is_overlay_scaled(pi)) { -+ -+ int x1, y1, x2, y2; -+ -+ if (x > pi->pos_x) -+ x1 = pi->pos_x; -+ else -+ x1 = x; -+ -+ if (y > pi->pos_y) -+ y1 = pi->pos_y; -+ else -+ y1 = y; -+ -+ if ((x + w) < (pi->pos_x + pi->out_width)) -+ x2 = pi->pos_x + pi->out_width; -+ else -+ x2 = x + w; -+ -+ if ((y + h) < (pi->pos_y + pi->out_height)) -+ y2 = pi->pos_y + pi->out_height; -+ else -+ y2 = y + h; -+ -+ x = x1; -+ y = y1; -+ w = x2 - x1; -+ h = y2 - y1; -+ -+ DSSDBG("Update area after enlarge due to " -+ "scaling %d, %d %dx%d\n", -+ x, y, w, h); -+ } -+ } -+ } -+ -+ for (i = 0; i < mgr->num_overlays; i++) { -+ struct omap_overlay *ovl = &mgr->overlays[i]; -+ struct omap_overlay_info *pi = &ovl->info; -+ -+ int px = pi->pos_x; -+ int py = pi->pos_y; -+ int pw = pi->width; -+ int ph = pi->height; -+ int pow = pi->out_width; -+ int poh = pi->out_height; -+ u32 pa = pi->paddr; -+ int psw = pi->screen_width; -+ int bpp; -+ -+ if (ovl->manager != mgr) -+ continue; -+ -+ /* -+ * If plane is not enabled or the update region -+ * does not intersect with the plane in question, -+ * we really disable the plane from hardware -+ */ -+ -+ if (!pi->enabled || -+ !dispc_is_intersecting(x, y, w, h, -+ px, py, pow, poh)) { -+ dispc_enable_plane(ovl->id, 0); -+ continue; -+ } -+ -+ switch (pi->color_mode) { -+ case OMAP_DSS_COLOR_RGB16: -+ bpp = 16; -+ break; -+ -+ case OMAP_DSS_COLOR_RGB24P: -+ bpp = 24; -+ break; -+ -+ case OMAP_DSS_COLOR_RGB24U: -+ bpp = 32; -+ break; -+ -+ case OMAP_DSS_COLOR_YUV2: -+ case OMAP_DSS_COLOR_UYVY: -+ bpp = 16; -+ break; -+ -+ default: -+ BUG(); -+ return; -+ } -+ -+ if (x > pi->pos_x) { -+ px = 0; -+ pw -= (x - pi->pos_x); -+ pa += (x - pi->pos_x) * bpp / 8; -+ } else { -+ px = pi->pos_x - x; -+ } -+ -+ if (y > pi->pos_y) { -+ py = 0; -+ ph -= (y - pi->pos_y); -+ pa += (y - pi->pos_y) * psw * bpp / 8; -+ } else { -+ py = pi->pos_y - y; -+ } -+ -+ if (w < (px+pw)) -+ pw -= (px+pw) - (w); -+ -+ if (h < (py+ph)) -+ ph -= (py+ph) - (h); -+ -+ /* Can't scale the GFX plane */ -+ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 || -+ dispc_is_overlay_scaled(pi) == 0) { -+ pow = pw; -+ poh = ph; -+ } -+ -+ DSSDBG("calc plane %d, %x, sw %d, %d,%d, %dx%d -> %dx%d\n", -+ ovl->id, pa, psw, px, py, pw, ph, pow, poh); -+ -+ dispc_setup_plane(ovl->id, mgr->id, -+ pa, psw, -+ px, py, -+ pw, ph, -+ pow, poh, -+ pi->color_mode, 0); -+ -+ dispc_enable_plane(ovl->id, 1); -+ } -+ -+ *xi = x; -+ *yi = y; -+ *wi = w; -+ *hi = h; -+ -+} -+ -diff --git a/arch/arm/plat-omap/dss/display.c b/arch/arm/plat-omap/dss/display.c -new file mode 100644 -index 0000000..b7f7aff ---- /dev/null -+++ b/arch/arm/plat-omap/dss/display.c -@@ -0,0 +1,765 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/display.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#define DSS_SUBSYS_NAME "DISPLAY" -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "dss.h" -+ -+#define DSS_MAX_DISPLAYS 8 -+ -+static int num_displays; -+static struct omap_display displays[DSS_MAX_DISPLAYS]; -+ -+static ssize_t show_clk(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ ssize_t l, size = PAGE_SIZE; -+ -+ l = 0; -+ -+ l += dss_print_clocks(buf + l, size - l); -+ -+ l += dispc_print_clocks(buf + l, size - l); -+#ifdef CONFIG_OMAP2_DSS_DSI -+ l += dsi_print_clocks(buf + l, size - l); -+#endif -+ return l; -+} -+ -+static DEVICE_ATTR(clk, S_IRUGO, show_clk, NULL); -+ -+int initialize_sysfs(struct device *dev) -+{ -+ int r; -+ -+ r = device_create_file(dev, &dev_attr_clk); -+ if (r) -+ DSSERR("failed to create sysfs clk file\n"); -+ -+ return r; -+} -+ -+void uninitialize_sysfs(struct device *dev) -+{ -+ device_remove_file(dev, &dev_attr_clk); -+} -+ -+void initialize_displays(struct omap_dss_platform_data *pdata) -+{ -+ int i; -+ -+ num_displays = 0; -+ -+ BUG_ON(pdata->num_displays > DSS_MAX_DISPLAYS); -+ -+ for (i = 0; i < pdata->num_displays; ++i) { -+ struct omap_display *display = &displays[i]; -+ -+ /*atomic_set(&display->ref_count, 0);*/ -+ display->ref_count = 0; -+ -+ display->hw_config = *pdata->displays[i]; -+ display->type = pdata->displays[i]->type; -+ display->name = pdata->displays[i]->name; -+ -+ switch (display->type) { -+ -+ case OMAP_DISPLAY_TYPE_DPI: -+ dpi_init_display(display); -+ break; -+#ifdef CONFIG_OMAP2_DSS_RFBI -+ case OMAP_DISPLAY_TYPE_DBI: -+ rfbi_init_display(display); -+ break; -+#endif -+#ifdef CONFIG_OMAP2_DSS_VENC -+ case OMAP_DISPLAY_TYPE_VENC: -+ venc_init_display(display); -+ break; -+#endif -+#ifdef CONFIG_OMAP2_DSS_SDI -+ case OMAP_DISPLAY_TYPE_SDI: -+ sdi_init_display(display); -+ break; -+#endif -+#ifdef CONFIG_OMAP2_DSS_DSI -+ case OMAP_DISPLAY_TYPE_DSI: -+ dsi_init_display(display); -+ break; -+#endif -+ -+ default: -+ DSSERR("Support for display '%s' not compiled in.\n", -+ display->name); -+ continue; -+ } -+ -+ num_displays++; -+ } -+} -+ -+static int check_overlay(struct omap_overlay *ovl, -+ struct omap_display *display) -+{ -+ struct omap_overlay_info *info; -+ int outw, outh; -+ -+ if (!display) -+ return 0; -+ -+ if (!ovl->info.enabled) -+ return 0; -+ -+ info = &ovl->info; -+ -+ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { -+ outw = info->width; -+ outh = info->height; -+ } else { -+ if (info->out_width == 0) -+ outw = info->width; -+ else -+ outw = info->out_width; -+ -+ if (info->out_height == 0) -+ outh = info->height; -+ else -+ outh = info->out_height; -+ } -+ -+ if (display->x_res < info->pos_x + outw) -+ return -EINVAL; -+ -+ if (display->y_res < info->pos_y + outh) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+ -+static int omap_dss_set_manager(struct omap_overlay *ovl, -+ struct omap_overlay_manager *mgr) -+{ -+ int r; -+ -+ if (ovl->manager) { -+ DSSERR("overlay '%s' already has a manager '%s'\n", -+ ovl->name, ovl->manager->name); -+ } -+ -+ r = check_overlay(ovl, mgr->display); -+ if (r) -+ return r; -+ -+ ovl->manager = mgr; -+ -+ return 0; -+} -+ -+static int omap_dss_unset_manager(struct omap_overlay *ovl) -+{ -+ if (!ovl->manager) { -+ DSSERR("failed to detach overlay: manager not set\n"); -+ return -EINVAL; -+ } -+ -+ ovl->manager = NULL; -+ -+ return 0; -+} -+ -+static int omap_dss_set_display(struct omap_overlay_manager *mgr, -+ struct omap_display *display) -+{ -+ int i; -+ int r; -+ -+ if (display->manager) { -+ DSSERR("display '%s' already has a manager '%s'\n", -+ display->name, display->manager->name); -+ return -EINVAL; -+ } -+ -+ if ((mgr->supported_displays & display->type) == 0) { -+ DSSERR("display '%s' does not support manager '%s'\n", -+ display->name, mgr->name); -+ return -EINVAL; -+ } -+ -+ for (i = 0; i < mgr->num_overlays; i++) { -+ struct omap_overlay *ovl = &mgr->overlays[i]; -+ -+ if (ovl->manager != mgr || !ovl->info.enabled) -+ continue; -+ -+ r = check_overlay(ovl, display); -+ if (r) -+ return r; -+ } -+ -+ display->manager = mgr; -+ mgr->display = display; -+ -+ return 0; -+} -+ -+static int omap_dss_unset_display(struct omap_overlay_manager *mgr) -+{ -+ if (!mgr->display) { -+ DSSERR("failed to unset display, display not set.\n"); -+ return -EINVAL; -+ } -+ -+ mgr->display->manager = NULL; -+ mgr->display = NULL; -+ -+ return 0; -+} -+ -+static int omap_dss_setup_overlay_input(struct omap_overlay *ovl, -+ u32 paddr, void *vaddr, int screen_width, -+ int width, int height, -+ enum omap_color_mode color_mode) -+{ -+ int r; -+ struct omap_overlay_info old_info; -+ -+ if ((ovl->supported_modes & color_mode) == 0) { -+ DSSERR("overlay doesn't support mode %d\n", color_mode); -+ return -EINVAL; -+ } -+ -+ old_info = ovl->info; -+ -+ ovl->info.paddr = paddr; -+ ovl->info.vaddr = vaddr; -+ ovl->info.screen_width = screen_width; -+ -+ ovl->info.width = width; -+ ovl->info.height = height; -+ ovl->info.color_mode = color_mode; -+ -+ if (ovl->manager) { -+ r = check_overlay(ovl, ovl->manager->display); -+ if (r) { -+ ovl->info = old_info; -+ return r; -+ } -+ } -+ -+ return 0; -+} -+ -+static int omap_dss_setup_overlay_output(struct omap_overlay *ovl, -+ int pos_x, int pos_y, -+ int out_width, int out_height) -+{ -+ int r; -+ struct omap_overlay_info old_info; -+ -+ old_info = ovl->info; -+ -+ ovl->info.pos_x = pos_x; -+ ovl->info.pos_y = pos_y; -+ ovl->info.out_width = out_width; -+ ovl->info.out_height = out_height; -+ -+ if (ovl->manager) { -+ r = check_overlay(ovl, ovl->manager->display); -+ if (r) { -+ ovl->info = old_info; -+ return r; -+ } -+ } -+ -+ return 0; -+} -+ -+static int omap_dss_enable_overlay(struct omap_overlay *ovl, int enable) -+{ -+ struct omap_overlay_info old_info; -+ int r; -+ -+ old_info = ovl->info; -+ -+ ovl->info.enabled = enable ? 1 : 0; -+ -+ if (ovl->manager) { -+ r = check_overlay(ovl, ovl->manager->display); -+ if (r) { -+ ovl->info = old_info; -+ return r; -+ } -+ } -+ -+ return 0; -+} -+ -+ -+static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) -+{ -+ int i; -+ int r = 0; -+ -+ DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); -+ -+ if (!mgr->display) { -+ DSSDBG("no display, aborting apply\n"); -+ return 0; -+ } -+ -+ /* on a manual update display update() handles configuring -+ * planes */ -+ if (mgr->display->get_update_mode) { -+ enum omap_dss_update_mode mode; -+ mode = mgr->display->get_update_mode(mgr->display); -+ if (mode == OMAP_DSS_UPDATE_MANUAL) -+ return 0; -+ } -+ -+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ -+ for (i = 0; i < mgr->num_overlays; i++) { -+ int ilace = 0; -+ int outw, outh; -+ -+ struct omap_overlay *ovl = &mgr->overlays[i]; -+ -+ if (!ovl->manager) { -+ dispc_enable_plane(ovl->id, 0); -+ continue; -+ } -+ -+ if (ovl->manager != mgr) -+ continue; -+ -+ if (!ovl->info.enabled) { -+ dispc_enable_plane(ovl->id, 0); -+ continue; -+ } -+ -+ if (mgr->display->type == OMAP_DISPLAY_TYPE_VENC) -+ ilace = 1; -+ -+ if (ovl->info.out_width == 0) -+ outw = ovl->info.width; -+ else -+ outw = ovl->info.out_width; -+ -+ if (ovl->info.out_height == 0) -+ outh = ovl->info.height; -+ else -+ outh = ovl->info.out_height; -+ -+ r = dispc_setup_plane(ovl->id, ovl->manager->id, -+ ovl->info.paddr, -+ ovl->info.screen_width, -+ ovl->info.pos_x, -+ ovl->info.pos_y, -+ ovl->info.width, -+ ovl->info.height, -+ outw, -+ outh, -+ ovl->info.color_mode, -+ ilace); -+ -+ if (r) { -+ DSSERR("dispc_setup_plane failed\n"); -+ goto exit; -+ } -+ -+ dispc_enable_plane(ovl->id, 1); -+ } -+ -+ dispc_go(mgr->id); -+ -+exit: -+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ -+ return r; -+} -+ -+static struct omap_overlay dispc_overlays[] = { -+ { -+ .name = "gfx", -+ .id = OMAP_DSS_GFX, -+ .set_manager = &omap_dss_set_manager, -+ .unset_manager = &omap_dss_unset_manager, -+ .setup_input = &omap_dss_setup_overlay_input, -+ .setup_output = &omap_dss_setup_overlay_output, -+ .enable = &omap_dss_enable_overlay, -+ .supported_modes = OMAP_DSS_COLOR_GFX_OMAP3, -+ }, -+ { -+ .name = "vid1", -+ .id = OMAP_DSS_VIDEO1, -+ .set_manager = &omap_dss_set_manager, -+ .unset_manager = &omap_dss_unset_manager, -+ .setup_input = &omap_dss_setup_overlay_input, -+ .setup_output = &omap_dss_setup_overlay_output, -+ .enable = &omap_dss_enable_overlay, -+ .supported_modes = OMAP_DSS_COLOR_VID_OMAP3, -+ .caps = OMAP_DSS_OVL_CAP_SCALE, -+ }, -+ { -+ .name = "vid2", -+ .id = OMAP_DSS_VIDEO2, -+ .set_manager = &omap_dss_set_manager, -+ .unset_manager = &omap_dss_unset_manager, -+ .setup_input = &omap_dss_setup_overlay_input, -+ .setup_output = &omap_dss_setup_overlay_output, -+ .enable = &omap_dss_enable_overlay, -+ .supported_modes = OMAP_DSS_COLOR_VID_OMAP3, -+ .caps = OMAP_DSS_OVL_CAP_SCALE, -+ }, -+}; -+ -+static struct omap_overlay_manager dispc_overlay_managers[] = -+{ -+ [OMAP_DSS_OVL_MGR_LCD] = { -+ .name = "lcd", -+ .id = OMAP_DSS_CHANNEL_LCD, -+ .num_overlays = 3, -+ .overlays = dispc_overlays, -+ .set_display = &omap_dss_set_display, -+ .unset_display = &omap_dss_unset_display, -+ .apply = &omap_dss_mgr_apply, -+ .caps = OMAP_DSS_OVL_MGR_CAP_DISPC, -+ .supported_displays = -+ OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI | -+ OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI, -+ }, -+ [OMAP_DSS_OVL_MGR_TV] = { -+ .name = "tv", -+ .id = OMAP_DSS_CHANNEL_DIGIT, -+ .num_overlays = 3, -+ .overlays = dispc_overlays, -+ .set_display = &omap_dss_set_display, -+ .unset_display = &omap_dss_unset_display, -+ .apply = &omap_dss_mgr_apply, -+ .caps = OMAP_DSS_OVL_MGR_CAP_DISPC, -+ .supported_displays = OMAP_DISPLAY_TYPE_VENC, -+ }, -+}; -+ -+static int num_overlays = 3; -+ -+static struct omap_overlay *omap_dss_overlays[10] = { -+ &dispc_overlays[0], -+ &dispc_overlays[1], -+ &dispc_overlays[2], -+}; -+ -+static int num_overlay_managers = 2; -+ -+static struct omap_overlay_manager *omap_dss_overlay_managers[10] = { -+ &dispc_overlay_managers[0], -+ &dispc_overlay_managers[1], -+}; -+ -+ -+static void omap_dss_add_overlay(struct omap_overlay *overlay) -+{ -+ int i = num_overlays++; -+ -+ omap_dss_overlays[i] = overlay; -+} -+ -+static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) -+{ -+ int i = num_overlay_managers++; -+ omap_dss_overlay_managers[i] = manager; -+} -+ -+int omap_dss_get_num_overlays(void) -+{ -+ return num_overlays; -+} -+EXPORT_SYMBOL(omap_dss_get_num_overlays); -+ -+struct omap_overlay *omap_dss_get_overlay(int num) -+{ -+ BUG_ON(num >= num_overlays); -+ return omap_dss_overlays[num]; -+} -+EXPORT_SYMBOL(omap_dss_get_overlay); -+ -+int omap_dss_get_num_overlay_managers(void) -+{ -+ return num_overlay_managers; -+} -+EXPORT_SYMBOL(omap_dss_get_num_overlay_managers); -+ -+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num) -+{ -+ BUG_ON(num >= num_overlay_managers); -+ return omap_dss_overlay_managers[num]; -+} -+EXPORT_SYMBOL(omap_dss_get_overlay_manager); -+ -+static int ovl_mgr_apply_l4(struct omap_overlay_manager *mgr) -+{ -+ DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name); -+ -+ return 0; -+} -+ -+void initialize_overlays(void) -+{ -+ int i; -+ struct omap_overlay_manager *lcd_mgr; -+ struct omap_overlay_manager *tv_mgr; -+ struct omap_overlay_manager *def_mgr = NULL; -+ -+ lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD); -+ tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV); -+ -+ /* connect lcd manager to first non-VENC display found */ -+ for (i = 0; i < num_displays; i++) { -+ if (displays[i].type != OMAP_DISPLAY_TYPE_VENC) { -+ struct omap_display *display = &displays[i]; -+ omap_dss_set_display(lcd_mgr, display); -+ -+ def_mgr = lcd_mgr; -+ -+ break; -+ } -+ } -+ -+ /* connect tv manager to first VENC display found */ -+ for (i = 0; i < num_displays; i++) { -+ if (displays[i].type == OMAP_DISPLAY_TYPE_VENC) { -+ struct omap_display *display = &displays[i]; -+ omap_dss_set_display(tv_mgr, display); -+ -+ if (!def_mgr) -+ def_mgr = tv_mgr; -+ -+ break; -+ } -+ } -+ -+ /* connect all dispc overlays to def_mgr */ -+ if (def_mgr) { -+ for (i = 0; i < 3; i++) { -+ struct omap_overlay *ovl; -+ ovl = omap_dss_get_overlay(i); -+ omap_dss_set_manager(ovl, def_mgr); -+ } -+ } -+ -+ /* setup L4 overlay as an example */ -+ { -+ static struct omap_overlay ovl = { -+ .name = "l4-ovl", -+ .supported_modes = OMAP_DSS_COLOR_RGB24U, -+ .set_manager = &omap_dss_set_manager, -+ .unset_manager = &omap_dss_unset_manager, -+ .setup_input = &omap_dss_setup_overlay_input, -+ .setup_output = &omap_dss_setup_overlay_output, -+ .enable = &omap_dss_enable_overlay, -+ }; -+ -+ static struct omap_overlay_manager mgr = { -+ .name = "l4", -+ .num_overlays = 1, -+ .overlays = &ovl, -+ .set_display = &omap_dss_set_display, -+ .unset_display = &omap_dss_unset_display, -+ .apply = &ovl_mgr_apply_l4, -+ .supported_displays = -+ OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI, -+ }; -+ -+ omap_dss_add_overlay(&ovl); -+ omap_dss_add_overlay_manager(&mgr); -+ omap_dss_set_manager(&ovl, &mgr); -+ } -+ -+} -+ -+ -+int omap_dss_get_num_displays(void) -+{ -+ return num_displays; -+} -+EXPORT_SYMBOL(omap_dss_get_num_displays); -+ -+struct omap_display *omap_dss_get_display(int no) -+{ -+ struct omap_display *display; -+ -+ if (no >= num_displays) -+ return NULL; -+ -+ display = &displays[no]; -+ -+ switch (display->type) { -+ case OMAP_DISPLAY_TYPE_VENC: -+ break; -+ -+ case OMAP_DISPLAY_TYPE_DPI: -+ case OMAP_DISPLAY_TYPE_SDI: -+ if (display->panel == NULL) -+ return NULL; -+ break; -+ -+ case OMAP_DISPLAY_TYPE_DBI: -+ case OMAP_DISPLAY_TYPE_DSI: -+ if (display->panel == NULL || display->ctrl == NULL) -+ return NULL; -+ break; -+ -+ default: -+ return NULL; -+ } -+ -+ if (display->panel) { -+ if (!try_module_get(display->panel->owner)) -+ goto err0; -+ -+ if (display->panel->init) -+ if (display->panel->init(display) != 0) -+ goto err1; -+ } -+ -+ if (display->ctrl) { -+ if (!try_module_get(display->ctrl->owner)) -+ goto err2; -+ -+ if (display->ctrl->init) -+ if (display->ctrl->init(display) != 0) -+ goto err3; -+ } -+ -+ display->ref_count++; -+ /* -+ if (atomic_cmpxchg(&display->ref_count, 0, 1) != 0) -+ return 0; -+*/ -+ if (display->panel) { -+ display->x_res = display->panel->x_res; -+ display->y_res = display->panel->y_res; -+ display->bpp = display->panel->bpp; -+ } -+ -+ return display; -+err3: -+ if (display->ctrl) -+ module_put(display->ctrl->owner); -+err2: -+ if (display->panel && display->panel->init) -+ display->panel->cleanup(display); -+err1: -+ if (display->panel) -+ module_put(display->panel->owner); -+err0: -+ return NULL; -+} -+EXPORT_SYMBOL(omap_dss_get_display); -+ -+void omap_dss_put_display(struct omap_display *display) -+{ -+ if (--display->ref_count > 0) -+ return; -+/* -+ if (atomic_cmpxchg(&display->ref_count, 1, 0) != 1) -+ return; -+*/ -+ if (display->ctrl) { -+ if (display->ctrl->cleanup) -+ display->ctrl->cleanup(display); -+ module_put(display->ctrl->owner); -+ } -+ -+ if (display->panel) { -+ if (display->panel->cleanup) -+ display->panel->cleanup(display); -+ module_put(display->panel->owner); -+ } -+} -+EXPORT_SYMBOL(omap_dss_put_display); -+ -+void omap_dss_register_ctrl(struct omap_ctrl *ctrl) -+{ -+ int i; -+ -+ for (i = 0; i < num_displays; i++) { -+ struct omap_display *display = &displays[i]; -+ if (display->hw_config.ctrl_name && -+ strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) { -+ display->ctrl = ctrl; -+ DSSDBG("ctrl '%s' registered\n", ctrl->name); -+ } -+ } -+} -+EXPORT_SYMBOL(omap_dss_register_ctrl); -+ -+void omap_dss_register_panel(struct omap_panel *panel) -+{ -+ int i; -+ -+ for (i = 0; i < num_displays; i++) { -+ struct omap_display *display = &displays[i]; -+ if (display->hw_config.panel_name && -+ strcmp(display->hw_config.panel_name, panel->name) == 0) { -+ display->panel = panel; -+ DSSDBG("panel '%s' registered\n", panel->name); -+ } -+ } -+} -+EXPORT_SYMBOL(omap_dss_register_panel); -+ -+void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl) -+{ -+ int i; -+ -+ for (i = 0; i < num_displays; i++) { -+ struct omap_display *display = &displays[i]; -+ if (display->hw_config.ctrl_name && -+ strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) -+ display->ctrl = NULL; -+ } -+} -+EXPORT_SYMBOL(omap_dss_unregister_ctrl); -+ -+void omap_dss_unregister_panel(struct omap_panel *panel) -+{ -+ int i; -+ -+ for (i = 0; i < num_displays; i++) { -+ struct omap_display *display = &displays[i]; -+ if (display->hw_config.panel_name && -+ strcmp(display->hw_config.panel_name, panel->name) == 0) -+ display->panel = NULL; -+ } -+} -+EXPORT_SYMBOL(omap_dss_unregister_panel); -diff --git a/arch/arm/plat-omap/dss/dpi.c b/arch/arm/plat-omap/dss/dpi.c -new file mode 100644 -index 0000000..e3ad44e ---- /dev/null -+++ b/arch/arm/plat-omap/dss/dpi.c -@@ -0,0 +1,320 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/dpi.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "dss.h" -+ -+ -+static struct { -+ int update_enabled; -+} dpi; -+ -+static void dpi_set_mode(struct omap_display *display) -+{ -+ struct omap_panel *panel = display->panel; -+ int lck_div, pck_div; -+ unsigned long fck; -+ unsigned long pck; -+ int is_tft; -+ -+ dispc_set_lcd_size(display->x_res, display->y_res); -+ -+ dispc_set_lcd_timings(&panel->timings); -+ dispc_set_pol_freq(panel); -+ -+ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; -+ -+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL -+ { -+ struct dsi_clock_info cinfo; -+ dsi_pll_calc_pck(is_tft, -+ display->panel->timings.pixel_clock*1000, -+ &cinfo); -+ -+ dsi_pll_program(&cinfo); -+ -+ dss_select_clk_source(0, 1); -+ -+ dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div); -+ -+ fck = cinfo.dispc_fck; -+ lck_div = cinfo.lck_div; -+ pck_div = cinfo.pck_div; -+ } -+#else -+ { -+ struct dispc_clock_info cinfo; -+ dispc_calc_clock_div(is_tft, panel->timings.pixel_clock*1000, -+ &cinfo); -+ -+ if (dispc_set_clock_div(&cinfo)) { -+ DSSERR("Failed to set DSS clocks\n"); -+ return; -+ } -+ -+ fck = cinfo.fck; -+ lck_div = cinfo.lck_div; -+ pck_div = cinfo.pck_div; -+ } -+#endif -+ -+ pck = fck / lck_div / pck_div / 1000; -+ -+ if (pck != panel->timings.pixel_clock) { -+ DSSWARN("Could not find exact pixel clock. Requested %d KHz, " -+ "got %lu KHz.\n", -+ panel->timings.pixel_clock, -+ pck); -+ -+ panel->timings.pixel_clock = pck; -+ } -+ -+ DSSDBG("fck %lu, lck_div %d, pck_div %d\n", fck, lck_div, pck_div); -+#ifdef DEBUG -+ { -+ struct omap_video_timings *t; -+ int xtot, ytot; -+ unsigned long ht, vt; -+ -+ t = &display->panel->timings; -+ xtot = display->panel->x_res + t->hfp + t->hsw + t->hbp; -+ ytot = display->panel->y_res + t->vfp + t->vsw + t->vbp; -+ -+ ht = (pck * 1000) / xtot; -+ vt = (pck * 1000) / xtot / ytot; -+ -+ DSSDBG("hsync %ldHz, vsync %ldHz\n", ht, vt); -+ -+ } -+#endif -+ DSSDBG("pixel clock changed to %d\n", panel->timings.pixel_clock); -+} -+ -+ -+static int dpi_display_enable(struct omap_display *display) -+{ -+ struct omap_panel *panel = display->panel; -+ int r; -+ int is_tft; -+ -+ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { -+ DSSERR("display already enabled\n"); -+ return -EINVAL; -+ } -+ -+ r = panel->enable(display); -+ if (r) -+ return r; -+ -+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ -+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL -+ dss_clk_enable(DSS_CLK_FCK2); -+ r = dsi_pll_init(0, 1); -+ if (r) -+ return r; -+#endif -+ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; -+ -+ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); -+ dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT : -+ OMAP_DSS_LCD_DISPLAY_STN); -+ dispc_set_tft_data_lines(display->hw_config.u.dpi.data_lines); -+ -+ dpi_set_mode(display); -+ -+ mdelay(2); -+ -+ dispc_enable_lcd_out(1); -+ -+ display->state = OMAP_DSS_DISPLAY_ACTIVE; -+ -+ return 0; -+} -+ -+static int dpi_display_resume(struct omap_display *display); -+ -+static void dpi_display_disable(struct omap_display *display) -+{ -+ if (display->state == OMAP_DSS_DISPLAY_DISABLED) -+ return; -+ -+ if (display->state == OMAP_DSS_DISPLAY_SUSPENDED) -+ dpi_display_resume(display); -+ -+ display->panel->disable(display); -+ dispc_enable_lcd_out(0); -+ -+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL -+ dss_select_clk_source(0, 0); -+ dsi_pll_uninit(); -+ dss_clk_disable(DSS_CLK_FCK2); -+#endif -+ -+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ -+ display->state = OMAP_DSS_DISPLAY_DISABLED; -+} -+ -+static int dpi_display_suspend(struct omap_display *display) -+{ -+ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) -+ return -EINVAL; -+ -+ if (display->panel->suspend) -+ display->panel->suspend(display); -+ -+ dispc_enable_lcd_out(0); -+ -+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ -+ display->state = OMAP_DSS_DISPLAY_SUSPENDED; -+ -+ return 0; -+} -+ -+static int dpi_display_resume(struct omap_display *display) -+{ -+ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) -+ return -EINVAL; -+ -+ dispc_enable_lcd_out(1); -+ -+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ -+ if (display->panel->resume) -+ display->panel->resume(display); -+ -+ display->state = OMAP_DSS_DISPLAY_ACTIVE; -+ -+ return 0; -+} -+ -+static void dpi_display_set_mode(struct omap_display *display, -+ int x_res, int y_res, int bpp) -+{ -+ if (display->panel && display->panel->set_mode) -+ display->panel->set_mode(display, x_res, y_res, bpp); -+} -+ -+static void dpi_set_timings(struct omap_display *display, -+ struct omap_video_timings *timings) -+{ -+ DSSDBG("dpi_set_timings\n"); -+ display->panel->timings = *timings; -+ dpi_set_mode(display); -+} -+ -+static int dpi_check_timings(struct omap_display *display, -+ struct omap_video_timings *timings) -+{ -+ int is_tft; -+ int r; -+ -+ if (timings->hsw < 1 || timings->hsw > 64 || -+ timings->hfp < 1 || timings->hfp > 256 || -+ timings->hbp < 1 || timings->hbp > 256) { -+ return -EINVAL; -+ } -+ -+ if (timings->vsw < 1 || timings->vsw > 64 || -+ timings->vfp > 256 || timings->vbp > 256) { -+ return -EINVAL; -+ } -+ -+ if (timings->pixel_clock == 0) -+ return -EINVAL; -+ -+ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; -+ -+#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL -+ r = dsi_pll_calc_pck(is_tft, timings->pixel_clock * 1000, 0); -+#else -+ r = dispc_calc_clock_div(is_tft, timings->pixel_clock * 1000, 0); -+#endif -+ if (r) -+ return r; -+ -+ return 0; -+} -+ -+static void dpi_get_timings(struct omap_display *display, -+ struct omap_video_timings *timings) -+{ -+ *timings = display->panel->timings; -+} -+ -+static int dpi_display_set_update_mode(struct omap_display *display, -+ enum omap_dss_update_mode mode) -+{ -+ if (mode == OMAP_DSS_UPDATE_MANUAL) -+ return -EINVAL; -+ -+ if (mode == OMAP_DSS_UPDATE_DISABLED) { -+ dispc_enable_lcd_out(0); -+ dpi.update_enabled = 0; -+ } else { -+ dispc_enable_lcd_out(1); -+ dpi.update_enabled = 1; -+ } -+ -+ return 0; -+} -+ -+static enum omap_dss_update_mode dpi_display_get_update_mode( -+ struct omap_display *display) -+{ -+ return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO : -+ OMAP_DSS_UPDATE_DISABLED; -+} -+ -+void dpi_init_display(struct omap_display *display) -+{ -+ DSSDBG("DPI init_display\n"); -+ -+ display->enable = dpi_display_enable; -+ display->disable = dpi_display_disable; -+ display->suspend = dpi_display_suspend; -+ display->resume = dpi_display_resume; -+ display->set_mode = dpi_display_set_mode; -+ display->set_timings = dpi_set_timings; -+ display->check_timings = dpi_check_timings; -+ display->get_timings = dpi_get_timings; -+ display->set_update_mode = dpi_display_set_update_mode; -+ display->get_update_mode = dpi_display_get_update_mode; -+} -+ -+int dpi_init(void) -+{ -+ return 0; -+} -+ -+void dpi_exit(void) -+{ -+} -+ -diff --git a/arch/arm/plat-omap/dss/dsi.c b/arch/arm/plat-omap/dss/dsi.c -new file mode 100644 -index 0000000..7f7db32 ---- /dev/null -+++ b/arch/arm/plat-omap/dss/dsi.c -@@ -0,0 +1,3135 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/dsi.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#define DSS_SUBSYS_NAME "DSI" -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include "dss.h" -+ -+/*#define VERBOSE*/ -+/*#define VERBOSE_IRQ*/ -+/*#define MEASURE_PERF*/ -+ -+#define DSI_BASE 0x4804FC00 -+ -+struct dsi_reg { u16 idx; }; -+ -+#define DSI_REG(idx) ((const struct dsi_reg) { idx }) -+ -+#define DSI_SZ_REGS SZ_1K -+/* DSI Protocol Engine */ -+ -+#define DSI_REVISION DSI_REG(0x0000) -+#define DSI_SYSCONFIG DSI_REG(0x0010) -+#define DSI_SYSSTATUS DSI_REG(0x0014) -+#define DSI_IRQSTATUS DSI_REG(0x0018) -+#define DSI_IRQENABLE DSI_REG(0x001C) -+#define DSI_CTRL DSI_REG(0x0040) -+#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) -+#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) -+#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) -+#define DSI_CLK_CTRL DSI_REG(0x0054) -+#define DSI_TIMING1 DSI_REG(0x0058) -+#define DSI_TIMING2 DSI_REG(0x005C) -+#define DSI_VM_TIMING1 DSI_REG(0x0060) -+#define DSI_VM_TIMING2 DSI_REG(0x0064) -+#define DSI_VM_TIMING3 DSI_REG(0x0068) -+#define DSI_CLK_TIMING DSI_REG(0x006C) -+#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) -+#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) -+#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) -+#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) -+#define DSI_VM_TIMING4 DSI_REG(0x0080) -+#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) -+#define DSI_VM_TIMING5 DSI_REG(0x0088) -+#define DSI_VM_TIMING6 DSI_REG(0x008C) -+#define DSI_VM_TIMING7 DSI_REG(0x0090) -+#define DSI_STOPCLK_TIMING DSI_REG(0x0094) -+#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) -+#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) -+#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) -+#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) -+#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) -+#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) -+#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) -+ -+/* DSIPHY_SCP */ -+ -+#define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) -+#define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) -+#define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) -+#define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) -+ -+/* DSI_PLL_CTRL_SCP */ -+ -+#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) -+#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) -+#define DSI_PLL_GO DSI_REG(0x300 + 0x0008) -+#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) -+#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) -+ -+#define REG_GET(idx, start, end) \ -+ FLD_GET(dsi_read_reg(idx), start, end) -+ -+#define REG_FLD_MOD(idx, val, start, end) \ -+ dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) -+ -+/* Global interrupts */ -+#define DSI_IRQ_VC0 (1 << 0) -+#define DSI_IRQ_VC1 (1 << 1) -+#define DSI_IRQ_VC2 (1 << 2) -+#define DSI_IRQ_VC3 (1 << 3) -+#define DSI_IRQ_WAKEUP (1 << 4) -+#define DSI_IRQ_RESYNC (1 << 5) -+#define DSI_IRQ_PLL_LOCK (1 << 7) -+#define DSI_IRQ_PLL_UNLOCK (1 << 8) -+#define DSI_IRQ_PLL_RECALL (1 << 9) -+#define DSI_IRQ_COMPLEXIO_ERR (1 << 10) -+#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) -+#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) -+#define DSI_IRQ_TE_TRIGGER (1 << 16) -+#define DSI_IRQ_ACK_TRIGGER (1 << 17) -+#define DSI_IRQ_SYNC_LOST (1 << 18) -+#define DSI_IRQ_LDO_POWER_GOOD (1 << 19) -+#define DSI_IRQ_TA_TIMEOUT (1 << 20) -+#define DSI_IRQ_ERROR_MASK \ -+ (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ -+ DSI_IRQ_TA_TIMEOUT) -+#define DSI_IRQ_CHANNEL_MASK 0xf -+ -+/* Virtual channel interrupts */ -+#define DSI_VC_IRQ_CS (1 << 0) -+#define DSI_VC_IRQ_ECC_CORR (1 << 1) -+#define DSI_VC_IRQ_PACKET_SENT (1 << 2) -+#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) -+#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) -+#define DSI_VC_IRQ_BTA (1 << 5) -+#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) -+#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) -+#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) -+#define DSI_VC_IRQ_ERROR_MASK \ -+ (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ -+ DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ -+ DSI_VC_IRQ_FIFO_TX_UDF) -+ -+/* ComplexIO interrupts */ -+#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) -+#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) -+#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) -+#define DSI_CIO_IRQ_ERRESC1 (1 << 5) -+#define DSI_CIO_IRQ_ERRESC2 (1 << 6) -+#define DSI_CIO_IRQ_ERRESC3 (1 << 7) -+#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) -+#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) -+#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) -+#define DSI_CIO_IRQ_STATEULPS1 (1 << 15) -+#define DSI_CIO_IRQ_STATEULPS2 (1 << 16) -+#define DSI_CIO_IRQ_STATEULPS3 (1 << 17) -+#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) -+#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) -+#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) -+#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) -+#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) -+#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) -+#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) -+#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) -+ -+#define DSI_DT_DCS_SHORT_WRITE_0 0x05 -+#define DSI_DT_DCS_SHORT_WRITE_1 0x15 -+#define DSI_DT_DCS_READ 0x06 -+#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 -+#define DSI_DT_NULL_PACKET 0x09 -+#define DSI_DT_DCS_LONG_WRITE 0x39 -+ -+#define DSI_DT_RX_ACK_WITH_ERR 0x02 -+#define DSI_DT_RX_DCS_LONG_READ 0x1c -+#define DSI_DT_RX_SHORT_READ_1 0x21 -+#define DSI_DT_RX_SHORT_READ_2 0x22 -+ -+#define FINT_MAX 2100000 -+#define FINT_MIN 750000 -+#define REGN_MAX (1 << 7) -+#define REGM_MAX ((1 << 11) - 1) -+#define REGM3_MAX (1 << 4) -+#define REGM4_MAX (1 << 4) -+ -+enum fifo_size { -+ DSI_FIFO_SIZE_0 = 0, -+ DSI_FIFO_SIZE_32 = 1, -+ DSI_FIFO_SIZE_64 = 2, -+ DSI_FIFO_SIZE_96 = 3, -+ DSI_FIFO_SIZE_128 = 4, -+}; -+ -+static struct -+{ -+ void __iomem *base; -+ -+ unsigned long dsi1_pll_fclk; /* Hz */ -+ unsigned long dsi2_pll_fclk; /* Hz */ -+ unsigned long dsiphy; /* Hz */ -+ unsigned long ddr_clk; /* Hz */ -+ -+ u32 ctx[DSI_SZ_REGS / sizeof(u32)]; -+ -+ struct { -+ enum fifo_size fifo_size; -+ int dest_per; /* destination peripheral 0-3 */ -+ } vc[4]; -+ -+ struct mutex lock; -+ -+ unsigned pll_locked; -+ -+ struct completion bta_completion; -+ -+ spinlock_t update_lock; -+ int update_ongoing; -+ int update_syncers; -+ struct completion update_completion; -+ struct delayed_work framedone_work; -+ -+ enum omap_dss_update_mode user_update_mode; /* what the user wants */ -+ enum omap_dss_update_mode update_mode; /* current mode */ -+ int use_te; -+ int framedone_scheduled; /* helps to catch strange framedone bugs */ -+ -+ struct { -+ struct omap_display *display; -+ int x, y, w, h; -+ int bytespp; -+ } update_region; -+ -+#ifdef MEASURE_PERF -+ ktime_t measure_time; -+ int measure_frames; -+#endif -+} dsi; -+ -+static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) -+{ -+ __raw_writel(val, dsi.base + idx.idx); -+} -+ -+static inline u32 dsi_read_reg(const struct dsi_reg idx) -+{ -+ return __raw_readl(dsi.base + idx.idx); -+} -+ -+ -+#define SR(reg) \ -+ dsi.ctx[(DSI_##reg).idx / sizeof(u32)] = dsi_read_reg(DSI_##reg) -+#define RR(reg) \ -+ dsi_write_reg(DSI_##reg, dsi.ctx[(DSI_##reg).idx / sizeof(u32)]) -+ -+void dsi_save_context(void) -+{ -+ SR(SYSCONFIG); -+ SR(IRQENABLE); -+ SR(CTRL); -+ SR(COMPLEXIO_CFG1); -+ SR(COMPLEXIO_IRQ_ENABLE); -+ SR(CLK_CTRL); -+ SR(TIMING1); -+ SR(TIMING2); -+ SR(VM_TIMING1); -+ SR(VM_TIMING2); -+ SR(VM_TIMING3); -+ SR(CLK_TIMING); -+ SR(TX_FIFO_VC_SIZE); -+ SR(RX_FIFO_VC_SIZE); -+ SR(COMPLEXIO_CFG2); -+ SR(VM_TIMING4); -+ SR(VM_TIMING5); -+ SR(VM_TIMING6); -+ SR(VM_TIMING7); -+ SR(STOPCLK_TIMING); -+ -+ SR(VC_CTRL(0)); -+ SR(VC_TE(0)); -+ SR(VC_IRQENABLE(0)); -+ -+ SR(VC_CTRL(1)); -+ SR(VC_TE(1)); -+ SR(VC_IRQENABLE(1)); -+ -+ SR(VC_CTRL(2)); -+ SR(VC_TE(2)); -+ SR(VC_IRQENABLE(2)); -+ -+ SR(VC_CTRL(3)); -+ SR(VC_TE(3)); -+ SR(VC_IRQENABLE(3)); -+ -+ SR(DSIPHY_CFG0); -+ SR(DSIPHY_CFG1); -+ SR(DSIPHY_CFG2); -+ SR(DSIPHY_CFG5); -+ -+ SR(PLL_CONTROL); -+ SR(PLL_CONFIGURATION1); -+ SR(PLL_CONFIGURATION2); -+} -+ -+void dsi_restore_context(void) -+{ -+ RR(SYSCONFIG); -+ RR(IRQENABLE); -+ RR(CTRL); -+ RR(COMPLEXIO_CFG1); -+ RR(COMPLEXIO_IRQ_ENABLE); -+ RR(CLK_CTRL); -+ RR(TIMING1); -+ RR(TIMING2); -+ RR(VM_TIMING1); -+ RR(VM_TIMING2); -+ RR(VM_TIMING3); -+ RR(CLK_TIMING); -+ RR(TX_FIFO_VC_SIZE); -+ RR(RX_FIFO_VC_SIZE); -+ RR(COMPLEXIO_CFG2); -+ RR(VM_TIMING4); -+ RR(VM_TIMING5); -+ RR(VM_TIMING6); -+ RR(VM_TIMING7); -+ RR(STOPCLK_TIMING); -+ -+ RR(VC_CTRL(0)); -+ RR(VC_IRQENABLE(0)); -+ -+ RR(VC_CTRL(1)); -+ RR(VC_IRQENABLE(1)); -+ -+ RR(VC_CTRL(2)); -+ RR(VC_IRQENABLE(2)); -+ -+ RR(VC_CTRL(3)); -+ RR(VC_IRQENABLE(3)); -+ -+ RR(DSIPHY_CFG0); -+ RR(DSIPHY_CFG1); -+ RR(DSIPHY_CFG2); -+ RR(DSIPHY_CFG5); -+ -+ RR(PLL_CONTROL); -+ RR(PLL_CONFIGURATION1); -+ RR(PLL_CONFIGURATION2); -+} -+ -+#undef SR -+#undef RR -+ -+static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, -+ int value) -+{ -+ int t = 100000; -+ -+ while (REG_GET(idx, bitnum, bitnum) != value) { -+ if (--t == 0) -+ return !value; -+ } -+ -+ return value; -+} -+ -+ -+#ifdef MEASURE_PERF -+static void start_measuring(void) -+{ -+ dsi.measure_time = ktime_get(); -+} -+ -+static void end_measuring(const char *name) -+{ -+ ktime_t t; -+ u32 total_bytes; -+ u32 us; -+ const int numframes = 100; -+ -+ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) -+ return; -+ -+ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { -+ dsi.measure_frames++; -+ if (dsi.measure_frames < numframes) -+ return; -+ dsi.measure_frames = 0; -+ } -+ -+ t = ktime_get(); -+ t = ktime_sub(t, dsi.measure_time); -+ us = (u32)ktime_to_us(t); -+ if (us == 0) -+ us = 1; -+ -+ total_bytes = dsi.update_region.w * -+ dsi.update_region.h * -+ dsi.update_region.bytespp; -+ -+ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { -+ DSSINFO("%s update: %d frames in %u us, %u frames/sec\n", -+ name, numframes, -+ us, -+ 1000*1000 / us); -+ } else { -+ DSSINFO("%s update in %u us (%u Hz), %u bytes, %u kbytes/sec\n", -+ name, -+ us, -+ 1000*1000 / us, -+ total_bytes, -+ total_bytes * 1000 / us); -+ } -+} -+#else -+#define start_measuring() -+#define end_measuring(x) -+#endif -+ -+ -+ -+ -+static void print_irq_status(u32 status) -+{ -+#ifndef VERBOSE_IRQ -+ if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) -+ return; -+#endif -+ printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); -+ -+#define PIS(x) \ -+ if (status & DSI_IRQ_##x) \ -+ printk(#x " "); -+#ifdef VERBOSE_IRQ -+ PIS(VC0); -+ PIS(VC1); -+ PIS(VC2); -+ PIS(VC3); -+#endif -+ PIS(WAKEUP); -+ PIS(RESYNC); -+ PIS(PLL_LOCK); -+ PIS(PLL_UNLOCK); -+ PIS(PLL_RECALL); -+ PIS(COMPLEXIO_ERR); -+ PIS(HS_TX_TIMEOUT); -+ PIS(LP_RX_TIMEOUT); -+ PIS(TE_TRIGGER); -+ PIS(ACK_TRIGGER); -+ PIS(SYNC_LOST); -+ PIS(LDO_POWER_GOOD); -+ PIS(TA_TIMEOUT); -+#undef PIS -+ -+ printk("\n"); -+} -+ -+static void print_irq_status_vc(int channel, u32 status) -+{ -+#ifndef VERBOSE_IRQ -+ if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) -+ return; -+#endif -+ printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); -+ -+#define PIS(x) \ -+ if (status & DSI_VC_IRQ_##x) \ -+ printk(#x " "); -+ PIS(CS); -+ PIS(ECC_CORR); -+#ifdef VERBOSE_IRQ -+ PIS(PACKET_SENT); -+#endif -+ PIS(FIFO_TX_OVF); -+ PIS(FIFO_RX_OVF); -+ PIS(BTA); -+ PIS(ECC_NO_CORR); -+ PIS(FIFO_TX_UDF); -+ PIS(PP_BUSY_CHANGE); -+#undef PIS -+ printk("\n"); -+} -+ -+static void print_irq_status_cio(u32 status) -+{ -+ printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); -+ -+#define PIS(x) \ -+ if (status & DSI_CIO_IRQ_##x) \ -+ printk(#x " "); -+ PIS(ERRSYNCESC1); -+ PIS(ERRSYNCESC2); -+ PIS(ERRSYNCESC3); -+ PIS(ERRESC1); -+ PIS(ERRESC2); -+ PIS(ERRESC3); -+ PIS(ERRCONTROL1); -+ PIS(ERRCONTROL2); -+ PIS(ERRCONTROL3); -+ PIS(STATEULPS1); -+ PIS(STATEULPS2); -+ PIS(STATEULPS3); -+ PIS(ERRCONTENTIONLP0_1); -+ PIS(ERRCONTENTIONLP1_1); -+ PIS(ERRCONTENTIONLP0_2); -+ PIS(ERRCONTENTIONLP1_2); -+ PIS(ERRCONTENTIONLP0_3); -+ PIS(ERRCONTENTIONLP1_3); -+ PIS(ULPSACTIVENOT_ALL0); -+ PIS(ULPSACTIVENOT_ALL1); -+#undef PIS -+ -+ printk("\n"); -+} -+ -+static int debug_irq; -+ -+/* called from dss */ -+void dsi_irq_handler(void) -+{ -+ u32 irqstatus, vcstatus, ciostatus; -+ int i; -+ -+ irqstatus = dsi_read_reg(DSI_IRQSTATUS); -+ -+ if (irqstatus & DSI_IRQ_ERROR_MASK) { -+ DSSERR("DSI error, irqstatus %x\n", irqstatus); -+ print_irq_status(irqstatus); -+ } else if (debug_irq) { -+ print_irq_status(irqstatus); -+ } -+ -+ for (i = 0; i < 4; ++i) { -+ if ((irqstatus & (1< 30*1000*1000) -+ REG_FLD_MOD(DSI_CLK_CTRL, 1, 21, 21); /* LP_RX_SYNCHRO_ENABLE */ -+ -+ return 0; -+} -+ -+ -+enum dsi_pll_power_state { -+ DSI_PLL_POWER_OFF = 0x0, -+ DSI_PLL_POWER_ON_HSCLK = 0x1, -+ DSI_PLL_POWER_ON_ALL = 0x2, -+ DSI_PLL_POWER_ON_DIV = 0x3, -+}; -+ -+static int dsi_pll_power(enum dsi_pll_power_state state) -+{ -+ int t = 0; -+ -+ REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ -+ -+ /* PLL_PWR_STATUS */ -+ while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { -+ udelay(1); -+ if (t++ > 1000) { -+ DSSERR("Failed to set DSI PLL power mode to %d\n", -+ state); -+ return -ENODEV; -+ } -+ } -+ -+ return 0; -+} -+ -+int dsi_pll_calc_pck(int is_tft, unsigned long req_pck, -+ struct dsi_clock_info *cinfo) -+{ -+ struct dsi_clock_info cur, best; -+ int min_fck_per_pck; -+ int match = 0; -+ -+ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; -+ -+ if (min_fck_per_pck && -+ req_pck * min_fck_per_pck > DISPC_MAX_FCK) { -+ DSSERR("Requested pixel clock not possible with the current " -+ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " -+ "the constraint off.\n"); -+ min_fck_per_pck = 0; -+ } -+ -+ DSSDBG("dsi_pll_calc\n"); -+ -+retry: -+ memset(&best, 0, sizeof(best)); -+ -+ memset(&cur, 0, sizeof(cur)); -+ cur.clkin = dss_clk_get_rate(DSS_CLK_FCK2); -+ cur.use_dss2_fck = 1; -+ cur.highfreq = 0; -+ -+ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ -+ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ -+ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ -+ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { -+ if (cur.highfreq == 0) -+ cur.fint = cur.clkin / cur.regn; -+ else -+ cur.fint = cur.clkin / (2 * cur.regn); -+ -+ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) -+ continue; -+ -+ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ -+ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { -+ unsigned long a, b; -+ -+ a = 2 * cur.regm * (cur.clkin/1000); -+ b = cur.regn * (cur.highfreq + 1); -+ cur.dsiphy = a / b * 1000; -+ -+ if (cur.dsiphy > 1800 * 1000 * 1000) -+ break; -+ -+ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ -+ for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; -+ ++cur.regm3) { -+ cur.dispc_fck = cur.dsiphy / cur.regm3; -+ -+ /* this will narrow down the search a bit, -+ * but still give pixclocks below what was -+ * requested */ -+ if (cur.dispc_fck < req_pck) -+ break; -+ -+ if (cur.dispc_fck > DISPC_MAX_FCK) -+ continue; -+ -+ if (min_fck_per_pck && -+ cur.dispc_fck < -+ req_pck * min_fck_per_pck) -+ continue; -+ -+ match = 1; -+ -+ find_lck_pck_divs(is_tft, req_pck, -+ cur.dispc_fck, -+ &cur.lck_div, -+ &cur.pck_div); -+ -+ cur.lck = cur.dispc_fck / cur.lck_div; -+ cur.pck = cur.lck / cur.pck_div; -+ -+ if (abs(cur.pck - req_pck) < -+ abs(best.pck - req_pck)) { -+ best = cur; -+ -+ if (cur.pck == req_pck) -+ goto found; -+ } -+ } -+ } -+ } -+found: -+ if (!match) { -+ if (min_fck_per_pck) { -+ DSSERR("Could not find suitable clock settings.\n" -+ "Turning FCK/PCK constraint off and" -+ "trying again.\n"); -+ min_fck_per_pck = 0; -+ goto retry; -+ } -+ -+ DSSERR("Could not find suitable clock settings.\n"); -+ -+ return -EINVAL; -+ } -+ -+ /* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4 < 173MHz */ -+ /* hardcoded 48MHz for now. what should it be? */ -+ best.regm4 = best.dsiphy / 48000000; -+ if (best.regm4 > REGM4_MAX) -+ best.regm4 = REGM4_MAX; -+ best.dsi_fck = best.dsiphy / best.regm4; -+ -+ if (cinfo) -+ *cinfo = best; -+ -+ return 0; -+} -+ -+static int dsi_pll_calc_datafreq(unsigned long datafreq, -+ struct dsi_clock_info *cinfo) -+{ -+ struct dsi_clock_info cur, best; -+ const int use_dss2_fck = 1; -+ -+ DSSDBG("dsi_pll_calc_datarate\n"); -+ -+ memset(&best, 0, sizeof(best)); -+ -+ memset(&cur, 0, sizeof(cur)); -+ cur.use_dss2_fck = use_dss2_fck; -+ if (use_dss2_fck) { -+ cur.clkin = dss_clk_get_rate(DSS_CLK_FCK2); -+ cur.highfreq = 0; -+ } else { -+ cur.clkin = dispc_pclk_rate(); -+ if (cur.clkin < 32000000) -+ cur.highfreq = 0; -+ else -+ cur.highfreq = 1; -+ } -+ -+ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ -+ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ -+ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ -+ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { -+ if (cur.highfreq == 0) -+ cur.fint = cur.clkin / cur.regn; -+ else -+ cur.fint = cur.clkin / (2 * cur.regn); -+ -+ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) -+ continue; -+ -+ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ -+ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { -+ unsigned long a, b; -+ -+ a = 2 * cur.regm * (cur.clkin/1000); -+ b = cur.regn * (cur.highfreq + 1); -+ cur.dsiphy = a / b * 1000; -+ -+ if (cur.dsiphy > 1800 * 1000 * 1000) -+ break; -+ -+ if (abs(cur.dsiphy - datafreq) < -+ abs(best.dsiphy - datafreq)) { -+ best = cur; -+ /* DSSDBG("best %ld\n", best.dsiphy); */ -+ } -+ -+ if (cur.dsiphy == datafreq) -+ goto found; -+ } -+ } -+found: -+ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ -+ /* hardcoded 48MHz for now. what should it be? */ -+ best.regm3 = best.dsiphy / (48000000); -+ if (best.regm3 > REGM3_MAX) -+ best.regm3 = REGM3_MAX; -+ best.dispc_fck = best.dsiphy / best.regm3; -+ -+ /* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4 < 173MHz */ -+ /* hardcoded 48MHz for now. what should it be? */ -+ best.regm4 = best.dsiphy / (48000000); -+ if (best.regm4 > REGM4_MAX) -+ best.regm4 = REGM4_MAX; -+ best.dsi_fck = best.dsiphy / best.regm4; -+ -+ if (cinfo) -+ *cinfo = best; -+ -+ return 0; -+} -+ -+int dsi_pll_program(struct dsi_clock_info *cinfo) -+{ -+ int r = 0; -+ u32 l; -+ -+ DSSDBG("dsi_pll_program\n"); -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ dsi.dsiphy = cinfo->dsiphy; -+ dsi.ddr_clk = dsi.dsiphy / 4; -+ dsi.dsi1_pll_fclk = cinfo->dispc_fck; -+ dsi.dsi2_pll_fclk = cinfo->dsi_fck; -+ -+ DSSDBG("DSI Fint %ld\n", cinfo->fint); -+ -+ DSSDBG("clkin (%s) rate %ld, highfreq %d\n", -+ cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", -+ cinfo->clkin, -+ cinfo->highfreq); -+ -+ /* DSIPHY == CLKIN4DDR */ -+ DSSDBG("DSIPHY = 2 * %d / %d * %lu / %d = %lu\n", -+ cinfo->regm, -+ cinfo->regn, -+ cinfo->clkin, -+ cinfo->highfreq + 1, -+ cinfo->dsiphy); -+ -+ DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", -+ dsi.dsiphy / 1000 / 1000 / 2); -+ -+ DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk); -+ -+ DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", -+ cinfo->regm3, cinfo->dispc_fck); -+ DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", -+ cinfo->regm4, cinfo->dsi_fck); -+ -+ REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ -+ -+ l = dsi_read_reg(DSI_PLL_CONFIGURATION1); -+ l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ -+ l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ -+ l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ -+ l = FLD_MOD(l, cinfo->regm3 - 1, 22, 19); /* DSI_CLOCK_DIV */ -+ l = FLD_MOD(l, cinfo->regm4 - 1, 26, 23); /* DSIPROTO_CLOCK_DIV */ -+ dsi_write_reg(DSI_PLL_CONFIGURATION1, l); -+ -+ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); -+ l = FLD_MOD(l, 7, 4, 1); /* DSI_PLL_FREQSEL */ -+ /* DSI_PLL_CLKSEL */ -+ l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, 11, 11); -+ l = FLD_MOD(l, cinfo->highfreq, 12, 12); /* DSI_PLL_HIGHFREQ */ -+ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ -+ l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ -+ l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ -+ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); -+ -+ REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ -+ -+ if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { -+ DSSERR("dsi pll go bit not going down.\n"); -+ r = -EIO; -+ goto err; -+ } -+ -+ if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { -+ DSSERR("cannot lock PLL\n"); -+ r = -EIO; -+ goto err; -+ } -+ -+ dsi.pll_locked = 1; -+ -+ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); -+ l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ -+ l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ -+ l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ -+ l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ -+ l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ -+ l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ -+ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ -+ l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ -+ l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ -+ l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ -+ l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ -+ l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ -+ l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ -+ l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ -+ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); -+ -+ DSSDBG("PLL config done\n"); -+err: -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+ -+ return r; -+} -+ -+int dsi_pll_init(int enable_hsclk, int enable_hsdiv) -+{ -+ int r = 0; -+ enum dsi_pll_power_state pwstate; -+ struct dispc_clock_info cinfo; -+ -+ DSSDBG("PLL init\n"); -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ /* configure dispc fck and pixel clock to something sane */ -+ r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo); -+ if (r) -+ return r; -+ -+ r = dispc_set_clock_div(&cinfo); -+ if (r) { -+ DSSERR("Failed to set basic clocks\n"); -+ return r; -+ } -+ -+ /* PLL does not come out of reset without this... */ -+ dispc_pck_free_enable(1); -+ -+ if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { -+ DSSERR("PLL not coming out of reset.\n"); -+ r = -ENODEV; -+ goto err; -+ } -+ -+ /* ... but if left on, we get problems when planes do not -+ * fill the whole display. No idea about this XXX */ -+ dispc_pck_free_enable(0); -+ -+ if (enable_hsclk && enable_hsdiv) -+ pwstate = DSI_PLL_POWER_ON_ALL; -+ else if (enable_hsclk) -+ pwstate = DSI_PLL_POWER_ON_HSCLK; -+ else if (enable_hsdiv) -+ pwstate = DSI_PLL_POWER_ON_DIV; -+ else -+ pwstate = DSI_PLL_POWER_OFF; -+ -+ r = dsi_pll_power(pwstate); -+ -+ if (r) -+ goto err; -+ -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+ -+ DSSDBG("PLL init done\n"); -+ -+ return 0; -+err: -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+ return r; -+} -+ -+void dsi_pll_uninit(void) -+{ -+ dsi.pll_locked = 0; -+ dsi_pll_power(DSI_PLL_POWER_OFF); -+ DSSDBG("PLL uninit done\n"); -+} -+ -+unsigned long dsi_get_dsi1_pll_rate(void) -+{ -+ return dsi.dsi1_pll_fclk; -+} -+ -+unsigned long dsi_get_dsi2_pll_rate(void) -+{ -+ return dsi.dsi2_pll_fclk; -+} -+ -+ssize_t dsi_print_clocks(char *buf, ssize_t size) -+{ -+ ssize_t l = 0; -+ int clksel; -+ -+ enable_clocks(1); -+ -+ clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); -+ -+ l += snprintf(buf + l, size - l, "- dsi -\n"); -+ -+ l += snprintf(buf + l, size - l, "dsi fclk source = %s\n", -+ dss_get_dsi_clk_source() == 0 ? -+ "dss1_alwon_fclk" : "dsi2_pll_fclk"); -+ -+ l += snprintf(buf + l, size - l, "dsi pll source = %s\n", -+ clksel == 0 ? -+ "dss2_alwon_fclk" : "pclkfree"); -+ -+ l += snprintf(buf + l, size - l, -+ "DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n", -+ dsi.dsiphy, dsi.ddr_clk); -+ -+ l += snprintf(buf + l, size - l, -+ "dsi1_pll_fck\t%lu (%s)\n" -+ "dsi2_pll_fck\t%lu (%s)\n", -+ dsi.dsi1_pll_fclk, -+ dss_get_dispc_clk_source() == 0 ? "off" : "on", -+ dsi.dsi2_pll_fclk, -+ dss_get_dsi_clk_source() == 0 ? "off" : "on"); -+ -+ enable_clocks(0); -+ -+ return l; -+} -+ -+ -+enum dsi_complexio_power_state { -+ DSI_COMPLEXIO_POWER_OFF = 0x0, -+ DSI_COMPLEXIO_POWER_ON = 0x1, -+ DSI_COMPLEXIO_POWER_ULPS = 0x2, -+}; -+ -+static int dsi_complexio_power(enum dsi_complexio_power_state state) -+{ -+ int t = 0; -+ -+ /* PWR_CMD */ -+ REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); -+ -+ /* PWR_STATUS */ -+ while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { -+ udelay(1); -+ if (t++ > 1000) { -+ DSSERR("failed to set complexio power state to " -+ "%d\n", state); -+ return -ENODEV; -+ } -+ } -+ -+ return 0; -+} -+ -+static void dsi_complexio_config(struct omap_display *display) -+{ -+ u32 r; -+ -+ int clk_lane = display->hw_config.u.dsi.clk_lane; -+ int data1_lane = display->hw_config.u.dsi.data1_lane; -+ int data2_lane = display->hw_config.u.dsi.data2_lane; -+ int clk_pol = display->hw_config.u.dsi.clk_pol; -+ int data1_pol = display->hw_config.u.dsi.data1_pol; -+ int data2_pol = display->hw_config.u.dsi.data2_pol; -+ -+ r = dsi_read_reg(DSI_COMPLEXIO_CFG1); -+ r = FLD_MOD(r, clk_lane, 2, 0); -+ r = FLD_MOD(r, clk_pol, 3, 3); -+ r = FLD_MOD(r, data1_lane, 6, 4); -+ r = FLD_MOD(r, data1_pol, 7, 7); -+ r = FLD_MOD(r, data2_lane, 10, 8); -+ r = FLD_MOD(r, data2_pol, 11, 11); -+ dsi_write_reg(DSI_COMPLEXIO_CFG1, r); -+ -+ /* The configuration of the DSI complex I/O (number of data lanes, -+ position, differential order) should not be changed while -+ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for -+ the hardware to take into account a new configuration of the complex -+ I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to -+ follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, -+ then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set -+ DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the -+ DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the -+ DSI complex I/O configuration is unknown. */ -+ -+ /* -+ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); -+ REG_FLD_MOD(DSI_CTRL, 0, 0, 0); -+ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); -+ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); -+ */ -+} -+ -+static inline int ns2ddr(int ns) -+{ -+ /* convert time in ns to ddr ticks, rounding up */ -+ return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000; -+} -+ -+static void dsi_complexio_timings(void) -+{ -+ u32 r; -+ u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; -+ u32 tlpx_half, tclk_trail, tclk_zero; -+ u32 tclk_prepare; -+ -+ /* calculate timings */ -+ -+ /* 1 * DDR_CLK = 2 * UI */ -+ -+ /* min 40ns + 4*UI max 85ns + 6*UI */ -+ ths_prepare = ns2ddr(59) + 2; -+ -+ /* min 145ns + 10*UI */ -+ ths_prepare_ths_zero = ns2ddr(145) + 5; -+ -+ /* min max(8*UI, 60ns+4*UI) */ -+ ths_trail = max(4, ns2ddr(60) + 2); -+ -+ /* min 100ns */ -+ ths_exit = ns2ddr(100); -+ -+ /* tlpx min 50n */ -+ tlpx_half = ns2ddr(25); -+ -+ /* min 60ns */ -+ tclk_trail = ns2ddr(60); -+ -+ /* min 38ns, max 95ns */ -+ tclk_prepare = ns2ddr(38); -+ -+ /* min tclk-prepare + tclk-zero = 300ns */ -+ tclk_zero = ns2ddr(300 - 38); -+ -+#ifdef VERBOSE -+ DSSDBG("ths_prepare %d, ths_prepare_ths_zero %d\n", -+ ths_prepare, ths_prepare_ths_zero); -+ DSSDBG("ths_trail %d, ths_exit %d\n", ths_trail, ths_exit); -+ -+ -+ DSSDBG("tlpx_half %d, tclk_trail %d, tclk_zero %d\n", tlpx_half, -+ tclk_trail, tclk_zero); -+ DSSDBG("tclk_prepare %d\n", tclk_prepare); -+#endif -+ -+ /* program timings */ -+ -+ r = dsi_read_reg(DSI_DSIPHY_CFG0); -+ r = FLD_MOD(r, ths_prepare, 31, 24); -+ r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); -+ r = FLD_MOD(r, ths_trail, 15, 8); -+ r = FLD_MOD(r, ths_exit, 7, 0); -+ dsi_write_reg(DSI_DSIPHY_CFG0, r); -+ -+ r = dsi_read_reg(DSI_DSIPHY_CFG1); -+ r = FLD_MOD(r, tlpx_half, 22, 16); -+ r = FLD_MOD(r, tclk_trail, 15, 8); -+ r = FLD_MOD(r, tclk_zero, 7, 0); -+ dsi_write_reg(DSI_DSIPHY_CFG1, r); -+ -+ r = dsi_read_reg(DSI_DSIPHY_CFG2); -+ r = FLD_MOD(r, tclk_prepare, 7, 0); -+ dsi_write_reg(DSI_DSIPHY_CFG2, r); -+} -+ -+ -+static int dsi_complexio_init(struct omap_display *display) -+{ -+ int r = 0; -+ -+ DSSDBG("dsi_complexio_init\n"); -+ -+ /* CIO_CLK_ICG, enable L3 clk to CIO */ -+ REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); -+ -+ if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) { -+ DSSERR("ComplexIO PHY not coming out of reset.\n"); -+ r = -ENODEV; -+ goto err; -+ } -+ -+ dsi_complexio_config(display); -+ -+ r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); -+ -+ if (r) -+ goto err; -+ -+ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { -+ DSSERR("ComplexIO not coming out of reset.\n"); -+ r = -ENODEV; -+ goto err; -+ } -+ -+ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { -+ DSSERR("ComplexIO LDO power down.\n"); -+ r = -ENODEV; -+ goto err; -+ } -+ -+ dsi_complexio_timings(); -+ -+ /* -+ The configuration of the DSI complex I/O (number of data lanes, -+ position, differential order) should not be changed while -+ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the -+ hardware to recognize a new configuration of the complex I/O (done -+ in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow -+ this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next -+ reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] -+ LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN -+ bit to 1. If the sequence is not followed, the DSi complex I/O -+ configuration is undetermined. -+ */ -+ dsi_if_enable(1); -+ dsi_if_enable(0); -+ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ -+ dsi_if_enable(1); -+ dsi_if_enable(0); -+ -+ DSSDBG("CIO init done\n"); -+err: -+ return r; -+} -+ -+static void dsi_complexio_uninit(void) -+{ -+ dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); -+} -+ -+ -+ -+static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, -+ enum fifo_size size3, enum fifo_size size4) -+{ -+ u32 r = 0; -+ int add = 0; -+ int i; -+ -+ dsi.vc[0].fifo_size = size1; -+ dsi.vc[1].fifo_size = size2; -+ dsi.vc[2].fifo_size = size3; -+ dsi.vc[3].fifo_size = size4; -+ -+ for (i = 0; i < 4; i++) { -+ u8 v; -+ int size = dsi.vc[i].fifo_size; -+ -+ if (add + size > 4) { -+ DSSERR("Illegal FIFO configuration\n"); -+ BUG(); -+ } -+ -+ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); -+ r |= v << (8 * i); -+ /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ -+ add += size; -+ } -+ -+ dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); -+} -+ -+static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, -+ enum fifo_size size3, enum fifo_size size4) -+{ -+ u32 r = 0; -+ int add = 0; -+ int i; -+ -+ dsi.vc[0].fifo_size = size1; -+ dsi.vc[1].fifo_size = size2; -+ dsi.vc[2].fifo_size = size3; -+ dsi.vc[3].fifo_size = size4; -+ -+ for (i = 0; i < 4; i++) { -+ u8 v; -+ int size = dsi.vc[i].fifo_size; -+ -+ if (add + size > 4) { -+ DSSERR("Illegal FIFO configuration\n"); -+ BUG(); -+ } -+ -+ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); -+ r |= v << (8 * i); -+ /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ -+ add += size; -+ } -+ -+ dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); -+} -+ -+static int dsi_force_tx_stop_mode_io(void) -+{ -+ u32 r; -+ -+ r = dsi_read_reg(DSI_TIMING1); -+ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ -+ dsi_write_reg(DSI_TIMING1, r); -+ -+ if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { -+ DSSERR("TX_STOP bit not going down\n"); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static void dsi_vc_print_status(int channel) -+{ -+ u32 r; -+ -+ r = dsi_read_reg(DSI_VC_CTRL(channel)); -+ DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " -+ "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", -+ channel, -+ FLD_GET(r, 5, 5), -+ FLD_GET(r, 6, 6), -+ FLD_GET(r, 15, 15), -+ FLD_GET(r, 16, 16), -+ FLD_GET(r, 20, 20)); -+ -+ r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); -+ DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); -+} -+ -+static void dsi_vc_config(int channel) -+{ -+ u32 r; -+ -+ DSSDBG("dsi_vc_config %d\n", channel); -+ -+ r = dsi_read_reg(DSI_VC_CTRL(channel)); -+ -+ r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ -+ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ -+ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ -+ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ -+ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ -+ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ -+ r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ -+ -+ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ -+ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ -+ -+ dsi_write_reg(DSI_VC_CTRL(channel), r); -+} -+ -+static void dsi_vc_config_vp(int channel) -+{ -+ u32 r; -+ -+ DSSDBG("dsi_vc_config_vp\n"); -+ -+ r = dsi_read_reg(DSI_VC_CTRL(channel)); -+ -+ r = FLD_MOD(r, 1, 1, 1); /* SOURCE, 1 = video port */ -+ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ -+ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ -+ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ -+ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ -+ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ -+ r = FLD_MOD(r, 1, 9, 9); /* MODE_SPEED, high speed on/off */ -+ -+ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ -+ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ -+ -+ dsi_write_reg(DSI_VC_CTRL(channel), r); -+} -+ -+ -+static int dsi_vc_enable(int channel, int enable) -+{ -+ DSSDBG("dsi_vc_enable channel %d, enable %d\n", channel, enable); -+ -+ enable = enable ? 1 : 0; -+ -+ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); -+ -+ if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { -+ DSSERR("Failed to set dsi_vc_enable to %d\n", enable); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static void dsi_vc_enable_hs(int channel, int enable) -+{ -+ DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); -+ -+ dsi_vc_enable(channel, 0); -+ dsi_if_enable(0); -+ -+ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); -+ -+ dsi_vc_enable(channel, 1); -+ dsi_if_enable(1); -+ -+ dsi_force_tx_stop_mode_io(); -+} -+ -+static void dsi_vc_flush_long_data(int channel) -+{ -+ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { -+ u32 val; -+ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); -+ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", -+ (val >> 0) & 0xff, -+ (val >> 8) & 0xff, -+ (val >> 16) & 0xff, -+ (val >> 24) & 0xff); -+ } -+} -+ -+static u16 dsi_vc_flush_receive_data(int channel) -+{ -+ /* RX_FIFO_NOT_EMPTY */ -+ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { -+ u32 val; -+ u8 dt; -+ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); -+ DSSDBG("\trawval %#08x\n", val); -+ dt = FLD_GET(val, 7, 0); -+ if (dt == DSI_DT_RX_ACK_WITH_ERR) { -+ u16 err = FLD_GET(val, 23, 8); -+ DSSERR("\tACK with ERROR: %#x\n", err); -+ if (err & (1 << 9)) -+ DSSERR("\t\tECC multibit\n"); -+ if (err & (1 << 11)) -+ DSSERR("\t\tData type not recognized\n"); -+ if (err & (1 << 12)) -+ DSSERR("\t\tInvalid VC ID\n"); -+ -+ } else if (dt == DSI_DT_RX_SHORT_READ_1) { -+ DSSDBG("\tDCS short response, 1 byte: %#x\n", -+ FLD_GET(val, 23, 8)); -+ return FLD_GET(val, 23, 8); -+ } else if (dt == DSI_DT_RX_SHORT_READ_2) { -+ DSSDBG("\tDCS short response, 2 byte: %#x\n", -+ FLD_GET(val, 23, 8)); -+ return FLD_GET(val, 23, 8); -+ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { -+ DSSDBG("\tDCS long response, len %d\n", -+ FLD_GET(val, 23, 8)); -+ dsi_vc_flush_long_data(channel); -+ } else { -+ DSSERR("\tunknown datatype\n"); -+ } -+ } -+ return 0; -+} -+ -+static int dsi_vc_send_bta(int channel) -+{ -+ unsigned long tmo; -+ -+ /*DSSDBG("dsi_vc_send_bta_sync %d\n", channel); */ -+ -+ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ -+ DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); -+ dsi_vc_flush_receive_data(channel); -+ } -+ -+ REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ -+ -+ tmo = jiffies + msecs_to_jiffies(10); -+ while (REG_GET(DSI_VC_CTRL(channel), 6, 6) == 1) { -+ if (time_after(jiffies, tmo)) { -+ DSSERR("Failed to send BTA\n"); -+ return -EIO; -+ } -+ } -+ -+ return 0; -+} -+ -+static int dsi_vc_send_bta_sync(int channel) -+{ -+ int r = 0; -+ -+ init_completion(&dsi.bta_completion); -+ -+ dsi_vc_enable_bta_irq(channel); -+ -+ r = dsi_vc_send_bta(channel); -+ if (r) -+ goto err; -+ -+ if (wait_for_completion_timeout(&dsi.bta_completion, -+ msecs_to_jiffies(500)) == 0) { -+ DSSERR("Failed to receive BTA\n"); -+ r = -EIO; -+ goto err; -+ } -+err: -+ dsi_vc_disable_bta_irq(channel); -+ -+ return r; -+} -+ -+static inline void dsi_vc_write_long_header(int channel, u8 data_type, -+ u16 len, u8 ecc) -+{ -+ u32 val; -+ u8 data_id; -+ -+ /*data_id = data_type | channel << 6; */ -+ data_id = data_type | dsi.vc[channel].dest_per << 6; -+ -+ val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | -+ FLD_VAL(ecc, 31, 24); -+ -+ dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); -+} -+ -+static inline void dsi_vc_write_long_payload(int channel, -+ u8 b1, u8 b2, u8 b3, u8 b4) -+{ -+ u32 val; -+ -+ val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; -+ -+/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", -+ b1, b2, b3, b4, val); */ -+ -+ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); -+} -+ -+static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, -+ u8 ecc) -+{ -+ /*u32 val; */ -+ int i; -+ u8 *p; -+ int r = 0; -+ u8 b1, b2, b3, b4; -+ -+ /*DSSDBG("dsi_vc_send_long, %d bytes\n", len); */ -+ -+ /* len + header */ -+ if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { -+ DSSERR("unable to send long packet: packet too long.\n"); -+ return -EINVAL; -+ } -+ -+ dsi_vc_write_long_header(channel, data_type, len, ecc); -+ -+ /*dsi_vc_print_status(0); */ -+ -+ p = data; -+ for (i = 0; i < len >> 2; i++) { -+ /*DSSDBG("\tsending full packet %d\n", i); */ -+ /*dsi_vc_print_status(0); */ -+ -+ b1 = *p++; -+ b2 = *p++; -+ b3 = *p++; -+ b4 = *p++; -+ -+ dsi_vc_write_long_payload(channel, b1, b2, b3, b4); -+ } -+ -+ i = len % 4; -+ if (i) { -+ b1 = 0; b2 = 0; b3 = 0; -+ -+ /*DSSDBG("\tsending remainder bytes %d\n", i); */ -+ -+ switch (i) { -+ case 3: -+ b1 = *p++; -+ b2 = *p++; -+ b3 = *p++; -+ break; -+ case 2: -+ b1 = *p++; -+ b2 = *p++; -+ break; -+ case 1: -+ b1 = *p++; -+ break; -+ } -+ -+ dsi_vc_write_long_payload(channel, b1, b2, b3, 0); -+ } -+ -+ return r; -+} -+ -+static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) -+{ -+ u32 r; -+ u8 data_id; -+/* -+ DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", -+ channel, -+ data_type, data & 0xff, (data >> 8) & 0xff); -+*/ -+ if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { -+ DSSERR("ERROR FIFO FULL, aborting transfer\n"); -+ return -EINVAL; -+ } -+ -+ data_id = data_type | channel << 6; -+ -+ r = (data_id << 0) | (data << 8) | (ecc << 24); -+ -+ dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); -+ -+ return 0; -+} -+ -+int dsi_vc_send_null(int channel) -+{ -+ u8 nullpkg[] = {0, 0, 0, 0}; -+ return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); -+} -+EXPORT_SYMBOL(dsi_vc_send_null); -+ -+int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) -+{ -+ int r; -+ -+ BUG_ON(len == 0); -+ -+ if (len == 1) { -+ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, -+ data[0], 0); -+ } else if (len == 2) { -+ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, -+ data[0] | (data[1] << 8), 0); -+ } else { -+ /* 0x39 = DCS Long Write */ -+ r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, -+ data, len, 0); -+ } -+ -+ return r; -+} -+EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); -+ -+int dsi_vc_dcs_write(int channel, u8 *data, int len) -+{ -+ int r; -+ -+ r = dsi_vc_dcs_write_nosync(channel, data, len); -+ if (r) -+ return r; -+ -+ /* Some devices need time to process the msg in low power mode. -+ This also makes the write synchronous, and checks that -+ the peripheral is still alive */ -+ r = dsi_vc_send_bta_sync(channel); -+ -+ return r; -+} -+EXPORT_SYMBOL(dsi_vc_dcs_write); -+ -+int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) -+{ -+ u32 val; -+ u8 dt; -+ int debug = 0; -+ -+ if (debug) -+ DSSDBG("dsi_vc_dcs_read\n"); -+ -+ dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); -+ -+ dsi_vc_send_bta_sync(channel); -+ -+ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); -+ if (debug) -+ DSSDBG("\trawval %#08x\n", val); -+ dt = FLD_GET(val, 7, 0); -+ if (dt == DSI_DT_RX_ACK_WITH_ERR) { -+ u16 err = FLD_GET(val, 23, 8); -+ DSSERR("\tACK with ERROR: %#x\n", err); -+ if (err & (1 << 9)) -+ DSSERR("\t\tECC multibit\n"); -+ if (err & (1 << 11)) -+ DSSERR("\t\tData type not recognized\n"); -+ if (err & (1 << 12)) -+ DSSERR("\t\tInvalid VC ID\n"); -+ return -1; -+ -+ } else if (dt == DSI_DT_RX_SHORT_READ_1) { -+ u8 data = FLD_GET(val, 15, 8); -+ if (debug) -+ DSSDBG("\tDCS short response, 1 byte: %#x\n", data); -+ -+ if (buflen < 1) -+ return -1; -+ -+ buf[0] = data; -+ -+ return 1; -+ } else if (dt == DSI_DT_RX_SHORT_READ_2) { -+ u16 data = FLD_GET(val, 23, 8); -+ if (debug) -+ DSSDBG("\tDCS short response, 2 byte: %#x\n", data); -+ -+ if (buflen < 2) -+ return -1; -+ -+ buf[0] = data & 0xff; -+ buf[1] = (data >> 8) & 0xff; -+ -+ return 2; -+ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { -+ int x; -+ int len = FLD_GET(val, 23, 8); -+ if (debug) -+ DSSDBG("\tDCS long response, len %d\n", len); -+ -+ if (len > buflen) -+ return -1; -+ -+ x = 0; -+ while (x < len) { -+ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); -+ if (debug) -+ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 " -+ "%#02x\n", -+ (val >> 0) & 0xff, -+ (val >> 8) & 0xff, -+ (val >> 16) & 0xff, -+ (val >> 24) & 0xff); -+ -+ if (x < len) -+ buf[x++] = (val >> 0) & 0xff; -+ if (x < len) -+ buf[x++] = (val >> 8) & 0xff; -+ if (x < len) -+ buf[x++] = (val >> 16) & 0xff; -+ if (x < len) -+ buf[x++] = (val >> 24) & 0xff; -+ } -+ -+ return len; -+ } else { -+ DSSERR("\tunknown datatype\n"); -+ return -1; -+ } -+} -+EXPORT_SYMBOL(dsi_vc_dcs_read); -+ -+ -+int dsi_vc_set_max_rx_packet_size(int channel, u16 len) -+{ -+ return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, -+ len, 0); -+} -+EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); -+ -+ -+static int dsi_set_lp_rx_timeout(int ns, int x4, int x16) -+{ -+ u32 r; -+ unsigned long fck; -+ int ticks; -+ -+ /* ticks in DSI_FCK */ -+ -+ fck = dsi_fclk_rate(); -+ ticks = (fck / 1000 / 1000) * ns / 1000; -+ -+ if (ticks > 0x1fff) { -+ DSSERR("LP_TX_TO too high\n"); -+ return -EINVAL; -+ } -+ -+ r = dsi_read_reg(DSI_TIMING2); -+ r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ -+ r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ -+ r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ -+ r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ -+ dsi_write_reg(DSI_TIMING2, r); -+ -+ DSSDBG("LP_RX_TO %ld ns (%#x ticks)\n", -+ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / -+ (fck / 1000 / 1000), -+ ticks); -+ -+ return 0; -+} -+ -+static int dsi_set_ta_timeout(int ns, int x8, int x16) -+{ -+ u32 r; -+ unsigned long fck; -+ int ticks; -+ -+ /* ticks in DSI_FCK */ -+ -+ fck = dsi_fclk_rate(); -+ ticks = (fck / 1000 / 1000) * ns / 1000; -+ -+ if (ticks > 0x1fff) { -+ DSSERR("TA_TO too high\n"); -+ return -EINVAL; -+ } -+ -+ r = dsi_read_reg(DSI_TIMING1); -+ r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ -+ r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ -+ r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ -+ r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ -+ dsi_write_reg(DSI_TIMING1, r); -+ -+ DSSDBG("TA_TO %ld ns (%#x ticks)\n", -+ (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / -+ (fck / 1000 / 1000), -+ ticks); -+ -+ return 0; -+} -+ -+static int dsi_set_stop_state_counter(int ns, int x4, int x16) -+{ -+ u32 r; -+ unsigned long fck; -+ int ticks; -+ -+ /* ticks in DSI_FCK */ -+ -+ fck = dsi_fclk_rate(); -+ ticks = (fck / 1000 / 1000) * ns / 1000; -+ -+ if (ticks > 0x1fff) { -+ DSSERR("STOP_STATE_COUNTER_IO too high\n"); -+ return -EINVAL; -+ } -+ -+ r = dsi_read_reg(DSI_TIMING1); -+ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ -+ r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ -+ r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ -+ r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ -+ dsi_write_reg(DSI_TIMING1, r); -+ -+ DSSDBG("STOP_STATE_COUNTER %ld ns (%#x ticks)\n", -+ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / -+ (fck / 1000 / 1000), -+ ticks); -+ -+ return 0; -+} -+ -+static int dsi_set_hs_tx_timeout(int ns, int x4, int x16) -+{ -+ u32 r; -+ unsigned long fck; -+ int ticks; -+ -+ /* ticks in TxByteClkHS */ -+ -+ fck = dsi.ddr_clk / 4; -+ ticks = (fck / 1000 / 1000) * ns / 1000; -+ -+ if (ticks > 0x1fff) { -+ DSSERR("HS_TX_TO too high\n"); -+ return -EINVAL; -+ } -+ -+ r = dsi_read_reg(DSI_TIMING2); -+ r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ -+ r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ -+ r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ -+ r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ -+ dsi_write_reg(DSI_TIMING2, r); -+ -+ DSSDBG("HS_TX_TO %ld ns (%#x ticks)\n", -+ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / -+ (fck / 1000 / 1000), -+ ticks); -+ -+ return 0; -+} -+static int dsi_proto_config(struct omap_display *display) -+{ -+ u32 r; -+ int buswidth = 0; -+ -+ dsi_config_tx_fifo(DSI_FIFO_SIZE_128, -+ DSI_FIFO_SIZE_0, -+ DSI_FIFO_SIZE_0, -+ DSI_FIFO_SIZE_0); -+ -+ dsi_config_rx_fifo(DSI_FIFO_SIZE_128, -+ DSI_FIFO_SIZE_0, -+ DSI_FIFO_SIZE_0, -+ DSI_FIFO_SIZE_0); -+ -+ /* XXX what values for the timeouts? */ -+ dsi_set_stop_state_counter(1000, 0, 0); -+ -+ dsi_set_ta_timeout(50000, 1, 1); -+ -+ /* 3000ns * 16 */ -+ dsi_set_lp_rx_timeout(3000, 0, 1); -+ -+ /* 10000ns * 4 */ -+ dsi_set_hs_tx_timeout(10000, 1, 0); -+ -+ switch (display->bpp) { -+ case 16: -+ buswidth = 0; -+ break; -+ case 18: -+ buswidth = 1; -+ break; -+ case 24: -+ buswidth = 2; -+ break; -+ default: -+ BUG(); -+ } -+ -+ r = dsi_read_reg(DSI_CTRL); -+ r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ -+ r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ -+ r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ -+ /* XXX what should the ratio be */ -+ r = FLD_MOD(r, 0, 4, 4); /* VP_CLK_RATIO, VP_PCLK = VP_CLK/2 */ -+ r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ -+ r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ -+ r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ -+ r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ -+ r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ -+ r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ -+ r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ -+ -+ dsi_write_reg(DSI_CTRL, r); -+ -+ /* we configure vc0 for L4 communication, and -+ * vc1 for dispc */ -+ dsi_vc_config(0); -+ dsi_vc_config_vp(1); -+ -+ /* set all vc targets to peripheral 0 */ -+ dsi.vc[0].dest_per = 0; -+ dsi.vc[1].dest_per = 0; -+ dsi.vc[2].dest_per = 0; -+ dsi.vc[3].dest_per = 0; -+ -+ return 0; -+} -+ -+static void dsi_proto_timings(void) -+{ -+ int tlpx_half, tclk_zero, tclk_prepare, tclk_trail; -+ int tclk_pre, tclk_post; -+ int ddr_clk_pre, ddr_clk_post; -+ u32 r; -+ -+ r = dsi_read_reg(DSI_DSIPHY_CFG1); -+ tlpx_half = FLD_GET(r, 22, 16); -+ tclk_trail = FLD_GET(r, 15, 8); -+ tclk_zero = FLD_GET(r, 7, 0); -+ -+ r = dsi_read_reg(DSI_DSIPHY_CFG2); -+ tclk_prepare = FLD_GET(r, 7, 0); -+ -+ /* min 8*UI */ -+ tclk_pre = 20; -+ /* min 60ns + 52*UI */ -+ tclk_post = ns2ddr(60) + 26; -+ -+ ddr_clk_pre = (tclk_pre + tlpx_half*2 + tclk_zero + tclk_prepare) / 4; -+ ddr_clk_post = (tclk_post + tclk_trail) / 4; -+ -+ r = dsi_read_reg(DSI_CLK_TIMING); -+ r = FLD_MOD(r, ddr_clk_pre, 15, 8); -+ r = FLD_MOD(r, ddr_clk_post, 7, 0); -+ dsi_write_reg(DSI_CLK_TIMING, r); -+ -+#ifdef VERBOSE -+ DSSDBG("ddr_clk_pre %d, ddr_clk_post %d\n", -+ ddr_clk_pre, -+ ddr_clk_post); -+#endif -+} -+ -+ -+#define DSI_DECL_VARS \ -+ int __dsi_cb = 0; u32 __dsi_cv = 0; -+ -+#define DSI_FLUSH(ch) \ -+ if (__dsi_cb > 0) { \ -+ /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ -+ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ -+ __dsi_cb = __dsi_cv = 0; \ -+ } -+ -+#define DSI_PUSH(ch, data) \ -+ do { \ -+ __dsi_cv |= (data) << (__dsi_cb * 8); \ -+ /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ -+ if (++__dsi_cb > 3) \ -+ DSI_FLUSH(ch); \ -+ } while (0) -+ -+static int dsi_update_screen_l4(struct omap_display *display, -+ int x, int y, int w, int h) -+{ -+ /* Note: supports only 24bit colors in 32bit container */ -+ int first = 1; -+ int fifo_stalls = 0; -+ int max_dsi_packet_size; -+ int max_data_per_packet; -+ int max_pixels_per_packet; -+ int pixels_left; -+ int bytespp = 3; -+ int scr_width; -+ u32 *data; -+ int start_offset; -+ int horiz_inc; -+ int current_x; -+ struct omap_overlay *ovl; -+ -+ debug_irq = 0; -+ -+ DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", -+ x, y, w, h); -+ -+ ovl = &display->manager->overlays[0]; -+ -+ if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) -+ return -EINVAL; -+ -+ if (display->ctrl->bpp != 24) -+ return -EINVAL; -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ scr_width = ovl->info.screen_width; -+ data = ovl->info.vaddr; -+ -+ start_offset = scr_width * y + x; -+ horiz_inc = scr_width - w; -+ current_x = x; -+ -+ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes -+ * in fifo */ -+ -+ /* When using CPU, max long packet size is TX buffer size */ -+ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; -+ -+ /* we seem to get better perf if we divide the tx fifo to half, -+ and while the other half is being sent, we fill the other half -+ max_dsi_packet_size /= 2; */ -+ -+ max_data_per_packet = max_dsi_packet_size - 4 - 1; -+ -+ max_pixels_per_packet = max_data_per_packet / bytespp; -+ -+ DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); -+ -+ display->ctrl->setup_update(display, x, y, w, h); -+ -+ pixels_left = w * h; -+ -+ DSSDBG("total pixels %d\n", pixels_left); -+ -+ data += start_offset; -+ -+ dsi.update_region.x = x; -+ dsi.update_region.y = y; -+ dsi.update_region.w = w; -+ dsi.update_region.h = h; -+ dsi.update_region.bytespp = bytespp; -+ -+ start_measuring(); -+ -+ while (pixels_left > 0) { -+ /* 0x2c = write_memory_start */ -+ /* 0x3c = write_memory_continue */ -+ u8 dcs_cmd = first ? 0x2c : 0x3c; -+ int pixels; -+ DSI_DECL_VARS; -+ first = 0; -+ -+#if 1 -+ /* using fifo not empty */ -+ /* TX_FIFO_NOT_EMPTY */ -+ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { -+ udelay(1); -+ fifo_stalls++; -+ if (fifo_stalls > 0xfffff) { -+ DSSERR("fifo stalls overflow, pixels left %d\n", -+ pixels_left); -+ dsi_if_enable(0); -+ enable_clocks(0); -+ return -EIO; -+ } -+ } -+#elif 1 -+ /* using fifo emptiness */ -+ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < -+ max_dsi_packet_size) { -+ fifo_stalls++; -+ if (fifo_stalls > 0xfffff) { -+ DSSERR("fifo stalls overflow, pixels left %d\n", -+ pixels_left); -+ dsi_if_enable(0); -+ enable_clocks(0); -+ return -EIO; -+ } -+ } -+#else -+ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { -+ fifo_stalls++; -+ if (fifo_stalls > 0xfffff) { -+ DSSERR("fifo stalls overflow, pixels left %d\n", -+ pixels_left); -+ dsi_if_enable(0); -+ enable_clocks(0); -+ return -EIO; -+ } -+ } -+#endif -+ pixels = min(max_pixels_per_packet, pixels_left); -+ -+ pixels_left -= pixels; -+ -+ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, -+ 1 + pixels * bytespp, 0); -+ -+ DSI_PUSH(0, dcs_cmd); -+ -+ while (pixels-- > 0) { -+ u32 pix = *data++; -+ -+ DSI_PUSH(0, (pix >> 16) & 0xff); -+ DSI_PUSH(0, (pix >> 8) & 0xff); -+ DSI_PUSH(0, (pix >> 0) & 0xff); -+ -+ current_x++; -+ if (current_x == x+w) { -+ current_x = x; -+ data += horiz_inc; -+ } -+ } -+ -+ DSI_FLUSH(0); -+ } -+ -+ end_measuring("L4"); -+ -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+ -+ return 0; -+} -+ -+#if 0 -+static void dsi_clear_screen_l4(struct omap_display *display, -+ int x, int y, int w, int h) -+{ -+ int first = 1; -+ int fifo_stalls = 0; -+ int max_dsi_packet_size; -+ int max_data_per_packet; -+ int max_pixels_per_packet; -+ int pixels_left; -+ int bytespp = 3; -+ int pixnum; -+ -+ debug_irq = 0; -+ -+ DSSDBG("dsi_clear_screen_l4 (%d,%d %dx%d)\n", -+ x, y, w, h); -+ -+ if (display->ctrl->bpp != 24) -+ return -EINVAL; -+ -+ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) -+ * bytes in fifo */ -+ -+ /* When using CPU, max long packet size is TX buffer size */ -+ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; -+ -+ max_data_per_packet = max_dsi_packet_size - 4 - 1; -+ -+ max_pixels_per_packet = max_data_per_packet / bytespp; -+ -+ enable_clocks(1); -+ -+ display->ctrl->setup_update(display, x, y, w, h); -+ -+ pixels_left = w * h; -+ -+ dsi.update_region.x = x; -+ dsi.update_region.y = y; -+ dsi.update_region.w = w; -+ dsi.update_region.h = h; -+ dsi.update_region.bytespp = bytespp; -+ -+ start_measuring(); -+ -+ pixnum = 0; -+ -+ while (pixels_left > 0) { -+ /* 0x2c = write_memory_start */ -+ /* 0x3c = write_memory_continue */ -+ u8 dcs_cmd = first ? 0x2c : 0x3c; -+ int pixels; -+ DSI_DECL_VARS; -+ first = 0; -+ -+ /* TX_FIFO_NOT_EMPTY */ -+ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { -+ fifo_stalls++; -+ if (fifo_stalls > 0xfffff) { -+ DSSERR("fifo stalls overflow\n"); -+ dsi_if_enable(0); -+ enable_clocks(0); -+ return; -+ } -+ } -+ -+ pixels = min(max_pixels_per_packet, pixels_left); -+ -+ pixels_left -= pixels; -+ -+ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, -+ 1 + pixels * bytespp, 0); -+ -+ DSI_PUSH(0, dcs_cmd); -+ -+ while (pixels-- > 0) { -+ u32 pix; -+ -+ pix = 0x000000; -+ -+ DSI_PUSH(0, (pix >> 16) & 0xff); -+ DSI_PUSH(0, (pix >> 8) & 0xff); -+ DSI_PUSH(0, (pix >> 0) & 0xff); -+ } -+ -+ DSI_FLUSH(0); -+ } -+ -+ enable_clocks(0); -+ -+ end_measuring("L4 CLEAR"); -+} -+#endif -+ -+static int dsi_wait_for_framedone(int stop_update) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dsi.update_lock, flags); -+ if (dsi.update_ongoing) { -+ long wait = msecs_to_jiffies(1000); -+ dsi.update_syncers++; -+ if (stop_update) -+ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ wait = wait_for_completion_timeout(&dsi.update_completion, -+ wait); -+ if (wait == 0) { -+ DSSERR("timeout waiting sync\n"); -+ return -ETIME; -+ } -+ } else { -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ } -+ -+ return 0; -+} -+ -+static void dsi_setup_update_dispc(struct omap_display *display, -+ int x, int y, int w, int h) -+{ -+ int bytespp = 3; -+ -+ DSSDBG("dsi_setup_update_dispc(%d,%d %dx%d)\n", -+ x, y, w, h); -+ -+ dsi.update_region.display = display; -+ dsi.update_region.x = x; -+ dsi.update_region.y = y; -+ dsi.update_region.w = w; -+ dsi.update_region.h = h; -+ dsi.update_region.bytespp = bytespp; -+ -+ enable_clocks(1); -+ -+ dispc_setup_partial_planes(display, &x, &y, &w, &h); -+ -+ dispc_set_lcd_size(w, h); -+ -+ enable_clocks(0); -+} -+ -+static void dsi_update_screen_dispc(struct omap_display *display) -+{ -+ int bytespp = 3; -+ int total_len; -+ int line_packet_len; -+ int x, y, w, h; -+ u32 l; -+ -+ x = dsi.update_region.x; -+ y = dsi.update_region.y; -+ w = dsi.update_region.w; -+ h = dsi.update_region.h; -+ -+ if (dsi.user_update_mode != OMAP_DSS_UPDATE_AUTO) -+ DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", -+ x, y, w, h); -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ /* TODO: one packet could be longer, I think? Max is the line buffer */ -+ line_packet_len = w * bytespp + 1; /* 1 byte for DCS cmd */ -+ total_len = line_packet_len * h; -+ -+ display->ctrl->setup_update(display, x, y, w, h); -+ -+ if (0) -+ dsi_vc_print_status(1); -+ -+ start_measuring(); -+ -+ l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ -+ dsi_write_reg(DSI_VC_TE(1), l); -+ -+ dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, line_packet_len, 0); -+ -+ if (dsi.use_te) -+ l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ -+ else -+ l = FLD_MOD(l, 1, 31, 31); /* TE_START */ -+ dsi_write_reg(DSI_VC_TE(1), l); -+ -+ dispc_enable_lcd_out(1); -+ -+ if (dsi.use_te) -+ dsi_vc_send_bta(1); -+} -+ -+static void framedone_callback(void *data, u32 mask) -+{ -+ if (dsi.framedone_scheduled) { -+ DSSERR("Framedone already scheduled. Bogus FRAMEDONE IRQ?\n"); -+ return; -+ } -+ -+ dsi.framedone_scheduled = 1; -+ -+ /* We get FRAMEDONE when DISPC has finished sending pixels and turns -+ * itself off. However, DSI still has the pixels in its buffers, and -+ * is sending the data. Thus we have to wait until we can do a new -+ * transfer or turn the clocks off. We do that in a separate work -+ * func. */ -+ /* XXX When using auto update and delay value 0, the kernel seems to be -+ * very relaxed about when to call our callback. It may take a second. -+ * Thus we use a delay of 1 */ -+ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) -+ schedule_delayed_work(&dsi.framedone_work, 1); -+ else -+ schedule_delayed_work(&dsi.framedone_work, 0); -+} -+ -+static void framedone_worker(struct work_struct *work) -+{ -+ unsigned long flags; -+ u32 l; -+ unsigned long tmo; -+ int i = 0; -+ -+ l = REG_GET(DSI_VC_TE(1), 23, 0); /* TE_SIZE */ -+ -+ /* There shouldn't be much stuff in DSI buffers, if any, so we'll -+ * just busyloop */ -+ if (l > 0) { -+ tmo = jiffies + msecs_to_jiffies(50); -+ while (REG_GET(DSI_VC_TE(1), 23, 0) > 0) { /* TE_SIZE */ -+ i++; -+ if (time_after(jiffies, tmo)) { -+ DSSERR("timeout waiting TE_SIZE to zero\n"); -+ break; -+ } -+ cpu_relax(); -+ } -+ } -+ -+ if (REG_GET(DSI_VC_TE(1), 30, 30)) -+ DSSERR("TE_EN not zero\n"); -+ -+ if (REG_GET(DSI_VC_TE(1), 31, 31)) -+ DSSERR("TE_START not zero\n"); -+ -+ spin_lock_irqsave(&dsi.update_lock, flags); -+ if (dsi.update_ongoing == 0) { -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ DSSERR("framedone irq without update request\n"); -+ return; -+ } -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ -+ end_measuring("DISPC"); -+ -+ if (dsi.user_update_mode != OMAP_DSS_UPDATE_AUTO) -+ DSSDBG("FRAMEDONE\n"); -+ -+#if 0 -+ if (l) -+ DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); -+#else -+ if (l > 1024*3) -+ DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); -+#endif -+ -+#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC -+ dispc_fake_vsync_irq(); -+#endif -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+ -+ dsi.framedone_scheduled = 0; -+ -+ spin_lock_irqsave(&dsi.update_lock, flags); -+ -+ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) -+ dsi.update_ongoing = 0; -+ -+ while (dsi.update_syncers > 0) { -+ complete(&dsi.update_completion); -+ --dsi.update_syncers; -+ } -+ -+ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ dsi_update_screen_dispc(dsi.update_region.display); -+ } else { -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ } -+} -+ -+static void dsi_start_auto_update(struct omap_display *display) -+{ -+ unsigned long flags; -+ int bytespp = 3; -+ -+ DSSDBG("starting auto update\n"); -+ -+ dsi.update_region.display = display; -+ dsi.update_region.x = 0; -+ dsi.update_region.y = 0; -+ dsi.update_region.w = display->x_res; -+ dsi.update_region.h = display->y_res; -+ dsi.update_region.bytespp = bytespp; -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ dispc_set_lcd_size(display->x_res, display->y_res); -+ -+ spin_lock_irqsave(&dsi.update_lock, flags); -+ dsi.update_ongoing = 1; -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ dsi_update_screen_dispc(display); -+} -+ -+static void dsi_stop_auto_update(void) -+{ -+ DSSDBG("waiting for display to finish.\n"); -+ dsi_wait_for_framedone(1); -+ DSSDBG("done waiting\n"); -+ -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+} -+ -+static int dsi_set_update_mode(struct omap_display *display, -+ enum omap_dss_update_mode mode) -+{ -+ if (mode == dsi.update_mode) -+ return 0; -+ -+ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) -+ dsi_stop_auto_update(); -+ else if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) -+ dsi_wait_for_framedone(0); -+ -+ dsi.update_mode = mode; -+ -+ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) -+ dsi_start_auto_update(display); -+ -+ return 0; -+} -+ -+/* Display funcs */ -+ -+static int dsi_display_enable(struct omap_display *display) -+{ -+ int r = 0; -+ struct dsi_clock_info cinfo; -+ -+ DSSDBG("dsi_display_enable\n"); -+ -+ mutex_lock(&dsi.lock); -+ -+ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { -+ DSSERR("display already enabled\n"); -+ r = -EINVAL; -+ goto err0; -+ } -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ r = omap_dispc_register_isr(framedone_callback, NULL, -+ DISPC_IRQ_FRAMEDONE); -+ if (r) { -+ DSSERR("can't get FRAMEDONE irq\n"); -+ goto err1; -+ } -+ -+ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); -+ -+ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); -+ dispc_enable_fifohandcheck(1); -+ dispc_setup_plane_fifo(OMAP_DSS_GFX, 0); -+ dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, 0); -+ dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, 0); -+ dispc_set_tft_data_lines(display->bpp); -+ -+ { -+ struct omap_video_timings timings = { -+ .hsw = 1, -+ .hfp = 1, -+ .hbp = 1, -+ .vsw = 1, -+ .vfp = 0, -+ .vbp = 0, -+ }; -+ -+ dispc_set_lcd_timings(&timings); -+ } -+ -+ _dsi_print_reset_status(); -+ -+ r = dsi_pll_init(1, 0); -+ if (r) -+ goto err2; -+ -+ /* XXX hardcoded for 300Mbp/lane for now */ -+ r = dsi_pll_calc_datafreq(600 * 1000 * 1000, &cinfo); -+ if (r) -+ goto err3; -+ -+ r = dsi_pll_program(&cinfo); -+ if (r) -+ goto err3; -+ -+ DSSDBG("PLL OK\n"); -+ -+ r = dsi_complexio_init(display); -+ if (r) -+ goto err3; -+ -+ _dsi_print_reset_status(); -+ -+ dsi_proto_timings(); -+ dsi_set_lp_clk_divisor(); -+ -+ if (1) -+ _dsi_print_reset_status(); -+ -+ r = dsi_proto_config(display); -+ if (r) -+ goto err4; -+ -+ /* enable interface */ -+ dsi_vc_enable(0, 1); -+ dsi_vc_enable(1, 1); -+ dsi_if_enable(1); -+ dsi_force_tx_stop_mode_io(); -+ -+ -+ if (display->ctrl && display->ctrl->enable) { -+ r = display->ctrl->enable(display); -+ if (r) -+ goto err5; -+ } -+ -+ if (display->panel && display->panel->enable) { -+ r = display->panel->enable(display); -+ if (r) -+ goto err6; -+ } -+ -+ if (dsi.use_te) { -+ r = display->ctrl->enable_te(display, 1); -+ if (r) -+ goto err7; -+ } -+ -+ /* enable high-speed after initial config */ -+ dsi_vc_enable_hs(0, 1); -+ -+ display->state = OMAP_DSS_DISPLAY_ACTIVE; -+ -+ dsi_set_update_mode(display, dsi.user_update_mode); -+ -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+ mutex_unlock(&dsi.lock); -+ -+ return 0; -+err7: -+ if (display->panel && display->panel->disable) -+ display->panel->disable(display); -+err6: -+ if (display->ctrl && display->ctrl->disable) -+ display->ctrl->disable(display); -+err5: -+ dsi_if_enable(0); -+err4: -+ dsi_complexio_uninit(); -+err3: -+ dsi_pll_uninit(); -+err2: -+ omap_dispc_unregister_isr(framedone_callback); -+err1: -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+err0: -+ mutex_unlock(&dsi.lock); -+ DSSDBG("dsi_display_enable FAILED\n"); -+ return r; -+} -+ -+static void dsi_display_disable(struct omap_display *display) -+{ -+ DSSDBG("dsi_display_disable\n"); -+ -+ mutex_lock(&dsi.lock); -+ -+ if (display->state == OMAP_DSS_DISPLAY_DISABLED) -+ goto end; -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED); -+ -+ display->state = OMAP_DSS_DISPLAY_DISABLED; -+ -+ omap_dispc_unregister_isr(framedone_callback); -+ -+ if (display->panel && display->panel->disable) -+ display->panel->disable(display); -+ if (display->ctrl && display->ctrl->disable) -+ display->ctrl->disable(display); -+ -+ dsi_complexio_uninit(); -+ dsi_pll_uninit(); -+ -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+end: -+ mutex_unlock(&dsi.lock); -+} -+ -+static int dsi_display_suspend(struct omap_display *display) -+{ -+ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) -+ return -EINVAL; -+ -+ if (display->panel->suspend) -+ display->panel->suspend(display); -+ -+ if (display->ctrl->suspend) -+ display->ctrl->suspend(display); -+ -+ display->state = OMAP_DSS_DISPLAY_SUSPENDED; -+ -+ return 0; -+} -+ -+static int dsi_display_resume(struct omap_display *display) -+{ -+ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) -+ return -EINVAL; -+ -+ if (display->panel->resume) -+ display->panel->resume(display); -+ -+ if (display->ctrl->resume) -+ display->ctrl->resume(display); -+ -+ display->state = OMAP_DSS_DISPLAY_ACTIVE; -+ -+ return 0; -+} -+ -+static void dsi_display_set_mode(struct omap_display *display, -+ int x_res, int y_res, int bpp) -+{ -+ DSSDBG("dsi_display_set_mode %dx%d, %dbpp\n", x_res, y_res, bpp); -+} -+ -+static int dsi_display_update(struct omap_display *display, -+ int x, int y, int w, int h) -+{ -+ unsigned long flags; -+ int r = 0; -+ -+ DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); -+ -+ if (w == 0 || h == 0) -+ return 0; -+ -+ mutex_lock(&dsi.lock); -+ -+ if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) -+ goto end; /* XXX return error? */ -+ -+ spin_lock_irqsave(&dsi.update_lock, flags); -+ -+ if (dsi.update_ongoing) { -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ DSSERR("DSI is busy\n"); -+ r = -EBUSY; -+ goto end; -+ } -+ -+ dsi.update_ongoing = 1; -+ -+ if (dsi.update_syncers > 0) -+ DSSERR("someone waiting for sync, and no update ongoing\n"); -+ -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ -+ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { -+ dsi_setup_update_dispc(display, x, y, w, h); -+ dsi_update_screen_dispc(display); -+ } else { -+ r = dsi_update_screen_l4(display, x, y, w, h); -+ if (r) -+ goto end; -+ -+ spin_lock_irqsave(&dsi.update_lock, flags); -+ dsi.update_ongoing = 0; -+ while (dsi.update_syncers > 0) { -+ complete(&dsi.update_completion); -+ --dsi.update_syncers; -+ } -+ spin_unlock_irqrestore(&dsi.update_lock, flags); -+ } -+ -+end: -+ mutex_unlock(&dsi.lock); -+ return r; -+} -+ -+static int dsi_display_sync(struct omap_display *display) -+{ -+ int r = 0; -+ -+ DSSDBG("dsi_display_sync\n"); -+ -+ mutex_lock(&dsi.lock); -+ -+ if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) -+ goto end; -+ -+ r = dsi_wait_for_framedone(0); -+ -+end: -+ mutex_unlock(&dsi.lock); -+ return r; -+} -+ -+static int dsi_display_set_update_mode(struct omap_display *display, -+ enum omap_dss_update_mode mode) -+{ -+ int r; -+ -+ DSSDBG("dsi_display_set_update_mode\n"); -+ -+ mutex_lock(&dsi.lock); -+ -+ r = dsi_set_update_mode(display, mode); -+ dsi.user_update_mode = mode; -+ -+ mutex_unlock(&dsi.lock); -+ -+ return r; -+} -+ -+static enum omap_dss_update_mode dsi_display_get_update_mode( -+ struct omap_display *display) -+{ -+ return dsi.user_update_mode; -+} -+ -+static int dsi_display_enable_te(struct omap_display *display, int enable) -+{ -+ DSSDBG("dsi_display_enable_te\n"); -+ -+ mutex_lock(&dsi.lock); -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED); -+ -+ dsi.use_te = enable; -+ display->ctrl->enable_te(display, enable); -+ if (enable) { -+ /* disable LP_RX_TO, so that we can receive TE. -+ * Time to wait for TE is longer than the timer allows */ -+ REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ -+ } else { -+ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ -+ } -+ -+ /* restore the old update mode */ -+ dsi_set_update_mode(display, dsi.user_update_mode); -+ -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+ -+ mutex_unlock(&dsi.lock); -+ -+ return 0; -+} -+ -+static int dsi_display_get_te(struct omap_display *display) -+{ -+ return dsi.use_te; -+} -+ -+static int dsi_display_run_test(struct omap_display *display, int test_num) -+{ -+ int r = 0; -+ -+ DSSDBG("dsi_display_run_test %d\n", test_num); -+ -+ mutex_lock(&dsi.lock); -+ -+ enable_clocks(1); -+ dsi_enable_pll_clock(1); -+ -+ dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED); -+ -+ /* run test first in low speed mode */ -+ dsi_vc_enable_hs(0, 0); -+ -+ if (display->ctrl->run_test) { -+ r = display->ctrl->run_test(display, test_num); -+ if (r) -+ goto fail; -+ } -+ -+ if (display->panel->run_test) { -+ r = display->panel->run_test(display, test_num); -+ if (r) -+ goto fail; -+ } -+ -+ /* then in high speed */ -+ dsi_vc_enable_hs(0, 1); -+ -+ if (display->ctrl->run_test) { -+ r = display->ctrl->run_test(display, test_num); -+ if (r) -+ goto fail; -+ } -+ -+ if (display->panel->run_test) -+ r = display->panel->run_test(display, test_num); -+ -+fail: -+ dsi_vc_enable_hs(0, 1); -+ -+ /* restore the old update mode */ -+ dsi_set_update_mode(display, dsi.user_update_mode); -+ -+ enable_clocks(0); -+ dsi_enable_pll_clock(0); -+ -+ mutex_unlock(&dsi.lock); -+ -+ return r; -+} -+ -+void dsi_init_display(struct omap_display *display) -+{ -+ DSSDBG("DSI init\n"); -+ -+ display->enable = dsi_display_enable; -+ display->disable = dsi_display_disable; -+ display->suspend = dsi_display_suspend; -+ display->resume = dsi_display_resume; -+ display->set_mode = dsi_display_set_mode; -+ display->update = dsi_display_update; -+ display->sync = dsi_display_sync; -+ display->set_update_mode = dsi_display_set_update_mode; -+ display->get_update_mode = dsi_display_get_update_mode; -+ display->enable_te = dsi_display_enable_te; -+ display->get_te = dsi_display_get_te; -+ display->run_test = dsi_display_run_test; -+ -+ display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; -+} -+ -+int dsi_init(void) -+{ -+ u32 rev; -+ -+ init_completion(&dsi.bta_completion); -+ INIT_DELAYED_WORK(&dsi.framedone_work, framedone_worker); -+ -+ init_completion(&dsi.update_completion); -+ spin_lock_init(&dsi.update_lock); -+ dsi.update_ongoing = 0; -+ dsi.update_syncers = 0; -+ -+ mutex_init(&dsi.lock); -+ -+ dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); -+ if (!dsi.base) { -+ DSSERR("can't ioremap DSI\n"); -+ return -ENOMEM; -+ } -+ -+ enable_clocks(1); -+ -+ /* Autoidle */ -+ REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); -+ -+ /* ENWAKEUP */ -+ REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); -+ -+ /* SIDLEMODE smart-idle */ -+ REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); -+ -+ if (0) -+ _dsi_reset(); -+ -+ _dsi_initialize_irq(); -+ -+ rev = dsi_read_reg(DSI_REVISION); -+ printk(KERN_INFO "OMAP DSI rev %d.%d\n", -+ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); -+ -+ enable_clocks(0); -+ -+ return 0; -+} -+ -+void dsi_exit(void) -+{ -+ iounmap(dsi.base); -+ -+ DSSDBG("omap_dsi_exit\n"); -+} -+ -diff --git a/arch/arm/plat-omap/dss/dss.c b/arch/arm/plat-omap/dss/dss.c -new file mode 100644 -index 0000000..cc402dc ---- /dev/null -+++ b/arch/arm/plat-omap/dss/dss.c -@@ -0,0 +1,789 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/dss.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#define DSS_SUBSYS_NAME "DSS" -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "dss.h" -+ -+#define DSS_BASE 0x48050000 -+ -+#define DSS_SZ_REGS SZ_512 -+ -+struct dss_reg { -+ u16 idx; -+}; -+ -+#define DSS_REG(idx) ((const struct dss_reg) { idx }) -+ -+#define DSS_REVISION DSS_REG(0x0000) -+#define DSS_SYSCONFIG DSS_REG(0x0010) -+#define DSS_SYSSTATUS DSS_REG(0x0014) -+#define DSS_IRQSTATUS DSS_REG(0x0018) -+#define DSS_CONTROL DSS_REG(0x0040) -+#define DSS_SDI_CONTROL DSS_REG(0x0044) -+#define DSS_PLL_CONTROL DSS_REG(0x0048) -+#define DSS_SDI_STATUS DSS_REG(0x005C) -+ -+#define REG_GET(idx, start, end) \ -+ FLD_GET(dss_read_reg(idx), start, end) -+ -+#define REG_FLD_MOD(idx, val, start, end) \ -+ dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) -+ -+static struct { -+ void __iomem *base; -+ -+ struct clk *dss_ick; -+ struct clk *dss1_fck; -+ struct clk *dss2_fck; -+ struct clk *dss_54m_fck; -+ struct clk *dss_96m_fck; -+ -+ unsigned num_clks_enabled; -+ struct platform_device *pdev; -+ unsigned ctx_id; -+ u32 ctx[DSS_SZ_REGS / sizeof(u32)]; -+} dss; -+ -+static void dss_clk_enable_all_no_ctx(void); -+static void dss_clk_disable_all_no_ctx(void); -+static void dss_clk_enable_no_ctx(enum dss_clock clks); -+static void dss_clk_disable_no_ctx(enum dss_clock clks); -+static int _omap_dss_wait_reset(void); -+ -+static inline void dss_write_reg(const struct dss_reg idx, u32 val) -+{ -+ __raw_writel(val, dss.base + idx.idx); -+} -+ -+static inline u32 dss_read_reg(const struct dss_reg idx) -+{ -+ return __raw_readl(dss.base + idx.idx); -+} -+ -+#define SR(reg) \ -+ dss.ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(DSS_##reg) -+#define RR(reg) \ -+ dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)]) -+ -+static void dss_save_context(void) -+{ -+ SR(SYSCONFIG); -+ SR(CONTROL); -+ SR(SDI_CONTROL); -+ SR(PLL_CONTROL); -+} -+ -+static void dss_restore_context(void) -+{ -+ RR(SYSCONFIG); -+ RR(CONTROL); -+ RR(SDI_CONTROL); -+ RR(PLL_CONTROL); -+} -+ -+#undef SR -+#undef RR -+ -+/* PM TESTING */ -+#if 0 -+static unsigned last_tr_id; -+ -+unsigned get_last_off_on_transaction_id(struct device *dev) -+{ -+ return last_tr_id; -+} -+ -+void inc_last_off_on_transaction_id(void) -+{ -+ last_tr_id++; -+} -+ -+unsigned get_last_off_on_transaction_id(struct device *dev); -+ -+unsigned dss_get_ctx_id(void) -+{ -+ return get_last_off_on_transaction_id(&dss.pdev->dev); -+} -+#else -+static unsigned dss_get_ctx_id(void) -+{ -+ return 0; -+} -+#endif -+ -+static void save_all_ctx(void) -+{ -+ DSSDBG("save context\n"); -+ -+ dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); -+ -+ dss_save_context(); -+ dispc_save_context(); -+#ifdef CONFIG_OMAP2_DSS_DSI -+ dsi_save_context(); -+#endif -+ -+ dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); -+} -+ -+static void restore_all_ctx(void) -+{ -+ DSSDBG("restore context\n"); -+ -+ dss_clk_enable_all_no_ctx(); -+ -+ if (_omap_dss_wait_reset()) -+ DSSERR("DSS not coming out of reset after sleep\n"); -+ -+ dss_restore_context(); -+ dispc_restore_context(); -+#ifdef CONFIG_OMAP2_DSS_DSI -+ dsi_restore_context(); -+#endif -+ -+ dss_clk_disable_all_no_ctx(); -+} -+ -+void dss_sdi_init(int datapairs) -+{ -+ u32 l; -+ -+ BUG_ON(datapairs > 3 || datapairs < 1); -+ -+ l = dss_read_reg(DSS_SDI_CONTROL); -+ l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */ -+ l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */ -+ l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */ -+ dss_write_reg(DSS_SDI_CONTROL, l); -+ -+ l = dss_read_reg(DSS_PLL_CONTROL); -+ l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */ -+ l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */ -+ l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */ -+ dss_write_reg(DSS_PLL_CONTROL, l); -+ -+ /* Reset SDI PLL */ -+ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */ -+ udelay(1); /* wait 2x PCLK */ -+ -+ /* Lock SDI PLL */ -+ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */ -+ -+ /* Waiting for PLL lock request to complete */ -+ while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6)) -+ ; -+ -+ /* Clearing PLL_GO bit */ -+ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28); -+ -+ /* Waiting for PLL to lock */ -+ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) -+ ; -+ -+ dispc_lcd_enable_signal(1); -+ -+ /* Waiting for SDI reset to complete */ -+ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) -+ ; -+} -+ -+ssize_t dss_print_clocks(char *buf, ssize_t size) -+{ -+ ssize_t l = 0; -+ int i; -+ struct clk *clocks[5] = { -+ dss.dss_ick, -+ dss.dss1_fck, -+ dss.dss2_fck, -+ dss.dss_54m_fck, -+ dss.dss_96m_fck -+ }; -+ -+ l += snprintf(buf + l, size - l, "- dss -\n"); -+ -+ l += snprintf(buf + l, size - l, "internal clk count\t%u\n", -+ dss.num_clks_enabled); -+ -+ for (i = 0; i < 5; i++) { -+ if (!clocks[i]) -+ continue; -+ l += snprintf(buf + l, size - l, "%-15s\t%lu\t%d\n", -+ clocks[i]->name, -+ clk_get_rate(clocks[i]), -+ clk_get_usecount(clocks[i])); -+ } -+ -+ return l; -+} -+ -+static int get_dss_clocks(void) -+{ -+ const struct { -+ struct clk **clock; -+ char *omap2_name; -+ char *omap3_name; -+ } clocks[5] = { -+ { &dss.dss_ick, "dss_ick", "dss_ick" }, /* L3 & L4 ick */ -+ { &dss.dss1_fck, "dss1_fck", "dss1_alwon_fck" }, -+ { &dss.dss2_fck, "dss2_fck", "dss2_alwon_fck" }, -+ { &dss.dss_54m_fck, "dss_54m_fck", "dss_tv_fck" }, -+ { &dss.dss_96m_fck, NULL, "dss_96m_fck" }, -+ }; -+ -+ int r = 0; -+ int i; -+ const int num_clocks = 5; -+ -+ for (i = 0; i < num_clocks; i++) -+ *clocks[i].clock = NULL; -+ -+ for (i = 0; i < num_clocks; i++) { -+ struct clk *clk; -+ const char *clk_name; -+ -+ clk_name = cpu_is_omap34xx() ? clocks[i].omap3_name -+ : clocks[i].omap2_name; -+ -+ if (!clk_name) -+ continue; -+ -+ clk = clk_get(NULL, clk_name); -+ -+ if (IS_ERR(clk)) { -+ DSSERR("can't get clock %s", clk_name); -+ r = PTR_ERR(clk); -+ goto err; -+ } -+ -+ DSSDBG("clk %s, rate %ld\n", -+ clk_name, clk_get_rate(clk)); -+ -+ *clocks[i].clock = clk; -+ } -+ -+ return 0; -+ -+err: -+ for (i = 0; i < num_clocks; i++) { -+ if (!IS_ERR(*clocks[i].clock)) -+ clk_put(*clocks[i].clock); -+ } -+ -+ return r; -+} -+ -+static void put_dss_clocks(void) -+{ -+ if (dss.dss_96m_fck) -+ clk_put(dss.dss_96m_fck); -+ clk_put(dss.dss_54m_fck); -+ clk_put(dss.dss1_fck); -+ clk_put(dss.dss2_fck); -+ clk_put(dss.dss_ick); -+} -+ -+unsigned long dss_clk_get_rate(enum dss_clock clk) -+{ -+ switch (clk) { -+ case DSS_CLK_ICK: -+ return clk_get_rate(dss.dss_ick); -+ case DSS_CLK_FCK1: -+ return clk_get_rate(dss.dss1_fck); -+ case DSS_CLK_FCK2: -+ return clk_get_rate(dss.dss2_fck); -+ case DSS_CLK_54M: -+ return clk_get_rate(dss.dss_54m_fck); -+ case DSS_CLK_96M: -+ return clk_get_rate(dss.dss_96m_fck); -+ } -+ -+ BUG(); -+ return 0; -+} -+ -+static unsigned count_clk_bits(enum dss_clock clks) -+{ -+ unsigned num_clks = 0; -+ -+ if (clks & DSS_CLK_ICK) -+ ++num_clks; -+ if (clks & DSS_CLK_FCK1) -+ ++num_clks; -+ if (clks & DSS_CLK_FCK2) -+ ++num_clks; -+ if (clks & DSS_CLK_54M) -+ ++num_clks; -+ if (clks & DSS_CLK_96M) -+ ++num_clks; -+ -+ return num_clks; -+} -+ -+static void dss_clk_enable_no_ctx(enum dss_clock clks) -+{ -+ unsigned num_clks = count_clk_bits(clks); -+ -+ if (clks & DSS_CLK_ICK) -+ clk_enable(dss.dss_ick); -+ if (clks & DSS_CLK_FCK1) -+ clk_enable(dss.dss1_fck); -+ if (clks & DSS_CLK_FCK2) -+ clk_enable(dss.dss2_fck); -+ if (clks & DSS_CLK_54M) -+ clk_enable(dss.dss_54m_fck); -+ if (clks & DSS_CLK_96M) -+ clk_enable(dss.dss_96m_fck); -+ -+ dss.num_clks_enabled += num_clks; -+} -+ -+void dss_clk_enable(enum dss_clock clks) -+{ -+ int id; -+ -+ dss_clk_enable_no_ctx(clks); -+ -+ id = dss_get_ctx_id(); -+ -+ if (id != dss.ctx_id) { -+ DSSDBG("ctx id %u -> id %u\n", -+ dss.ctx_id, id); -+ restore_all_ctx(); -+ dss.ctx_id = id; -+ } -+} -+ -+static void dss_clk_disable_no_ctx(enum dss_clock clks) -+{ -+ unsigned num_clks = count_clk_bits(clks); -+ -+ if (clks & DSS_CLK_ICK) -+ clk_disable(dss.dss_ick); -+ if (clks & DSS_CLK_FCK1) -+ clk_disable(dss.dss1_fck); -+ if (clks & DSS_CLK_FCK2) -+ clk_disable(dss.dss2_fck); -+ if (clks & DSS_CLK_54M) -+ clk_disable(dss.dss_54m_fck); -+ if (clks & DSS_CLK_96M) -+ clk_disable(dss.dss_96m_fck); -+ -+ dss.num_clks_enabled -= num_clks; -+} -+ -+void dss_clk_disable(enum dss_clock clks) -+{ -+ unsigned num_clks = count_clk_bits(clks); -+ -+ BUG_ON(dss.num_clks_enabled < num_clks); -+ -+ if (dss.num_clks_enabled == num_clks) -+ save_all_ctx(); -+ -+ dss_clk_disable_no_ctx(clks); -+} -+ -+static void dss_clk_enable_all_no_ctx(void) -+{ -+ enum dss_clock clks; -+ -+ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; -+ if (cpu_is_omap34xx()) -+ clks |= DSS_CLK_96M; -+ dss_clk_enable_no_ctx(clks); -+} -+ -+static void dss_clk_disable_all_no_ctx(void) -+{ -+ enum dss_clock clks; -+ -+ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; -+ if (cpu_is_omap34xx()) -+ clks |= DSS_CLK_96M; -+ dss_clk_disable_no_ctx(clks); -+} -+ -+static void dss_clk_disable_all(void) -+{ -+ enum dss_clock clks; -+ -+ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; -+ if (cpu_is_omap34xx()) -+ clks |= DSS_CLK_96M; -+ dss_clk_disable(clks); -+} -+ -+void dss_select_clk_source(int dsi, int dispc) -+{ -+ u32 r; -+ r = dss_read_reg(DSS_CONTROL); -+ r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */ -+ r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */ -+ dss_write_reg(DSS_CONTROL, r); -+} -+ -+int dss_get_dsi_clk_source(void) -+{ -+ return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1); -+} -+ -+int dss_get_dispc_clk_source(void) -+{ -+ return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0); -+} -+ -+static irqreturn_t dss_irq_handler_omap2(int irq, void *arg) -+{ -+ //clk_enable(dss.dss_ick); -+ //clk_enable(dss.dss1_fck); -+ -+ dispc_irq_handler(); -+ -+ //clk_disable(dss.dss1_fck); -+ //clk_disable(dss.dss_ick); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t dss_irq_handler_omap3(int irq, void *arg) -+{ -+ u32 irqstatus; -+ -+ //clk_enable(dss.dss_ick); // XXX are these needed... -+ //clk_enable(dss.dss1_fck); -+ -+ irqstatus = dss_read_reg(DSS_IRQSTATUS); -+ -+ if (irqstatus & (1<<0)) /* DISPC_IRQ */ -+ dispc_irq_handler(); -+#ifdef CONFIG_OMAP2_DSS_DSI -+ if (irqstatus & (1<<1)) /* DSI_IRQ */ -+ dsi_irq_handler(); -+#endif -+ -+ //clk_disable(dss.dss1_fck); -+ //clk_disable(dss.dss_ick); -+ -+ return IRQ_HANDLED; -+} -+ -+static int _omap_dss_wait_reset(void) -+{ -+ unsigned timeout = 1000; -+ -+ while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) { -+ udelay(1); -+ if (!--timeout) { -+ DSSERR("soft reset failed\n"); -+ return -ENODEV; -+ } -+ } -+ -+ return 0; -+} -+ -+static int _omap_dss_reset(void) -+{ -+ /* Soft reset */ -+ REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1); -+ return _omap_dss_wait_reset(); -+} -+ -+void dss_set_venc_output(enum omap_dss_venc_type type) -+{ -+ int l = 0; -+ -+ if (type == OMAP_DSS_VENC_TYPE_COMPOSITE) -+ l = 0; -+ else if (type == OMAP_DSS_VENC_TYPE_SVIDEO) -+ l = 1; -+ else -+ BUG(); -+ -+ /* venc out selection. 0 = comp, 1 = svideo */ -+ REG_FLD_MOD(DSS_CONTROL, l, 6, 6); -+} -+ -+void dss_set_dac_pwrdn_bgz(int enable) -+{ -+ REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ -+} -+ -+int dss_init(void) -+{ -+ int r; -+ u32 rev; -+ -+ dss.base = ioremap(DSS_BASE, DSS_SZ_REGS); -+ if (!dss.base) { -+ DSSERR("can't ioremap DSS\n"); -+ r = -ENOMEM; -+ goto fail0; -+ } -+ -+ /* We need to wait here a bit, otherwise we sometimes start to get -+ * synclost errors. I believe we could wait for one framedone or -+ * perhaps vsync interrupt, but, because dispc is not initialized yet, -+ * we don't have access to the irq register. -+ */ -+ msleep(400); -+ -+ _omap_dss_reset(); -+ -+ /* autoidle */ -+ REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0); -+ -+ /* Select DPLL */ -+ REG_FLD_MOD(DSS_CONTROL, 0, 0, 0); -+ -+#ifdef CONFIG_OMAP2_DSS_VENC -+ REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */ -+ REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */ -+ REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */ -+#endif -+ -+ r = request_irq(INT_24XX_DSS_IRQ, -+ cpu_is_omap24xx() -+ ? dss_irq_handler_omap2 -+ : dss_irq_handler_omap3, -+ 0, "OMAP DSS", NULL); -+ -+ if (r < 0) { -+ DSSERR("omap2 dss: request_irq failed\n"); -+ goto fail1; -+ } -+ -+ dss_save_context(); -+ -+ rev = dss_read_reg(DSS_REVISION); -+ printk(KERN_INFO "OMAP DSS rev %d.%d\n", -+ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); -+ -+ return 0; -+ -+fail1: -+ iounmap(dss.base); -+fail0: -+ return r; -+} -+ -+void dss_exit(void) -+{ -+ int c; -+ -+ free_irq(INT_24XX_DSS_IRQ, NULL); -+ -+ /* these should be removed at some point */ -+ c = clk_get_usecount(dss.dss_ick); -+ if (c > 0) { -+ DSSERR("warning: dss_ick usecount %d, disabling\n", c); -+ while (c-- > 0) -+ clk_disable(dss.dss_ick); -+ } -+ -+ c = clk_get_usecount(dss.dss1_fck); -+ if (c > 0) { -+ DSSERR("warning: dss1_fck usecount %d, disabling\n", c); -+ while (c-- > 0) -+ clk_disable(dss.dss1_fck); -+ } -+ -+ c = clk_get_usecount(dss.dss2_fck); -+ if (c > 0) { -+ DSSERR("warning: dss2_fck usecount %d, disabling\n", c); -+ while (c-- > 0) -+ clk_disable(dss.dss2_fck); -+ } -+ -+ c = clk_get_usecount(dss.dss_54m_fck); -+ if (c > 0) { -+ DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c); -+ while (c-- > 0) -+ clk_disable(dss.dss_54m_fck); -+ } -+ -+ if (dss.dss_96m_fck) { -+ c = clk_get_usecount(dss.dss_96m_fck); -+ if (c > 0) { -+ DSSERR("warning: dss_96m_fck usecount %d, disabling\n", -+ c); -+ while (c-- > 0) -+ clk_disable(dss.dss_96m_fck); -+ } -+ } -+ -+ put_dss_clocks(); -+ -+ iounmap(dss.base); -+} -+ -+ -+ -+static int omap_dss_probe(struct platform_device *pdev) -+{ -+ struct omap_dss_platform_data *pdata = pdev->dev.platform_data; -+ -+ int r; -+ -+ dss.pdev = pdev; -+ -+ r = get_dss_clocks(); -+ if (r) -+ goto fail0; -+ -+ dss_clk_enable_all_no_ctx(); -+ -+ dss.ctx_id = dss_get_ctx_id(); -+ DSSDBG("initial ctx id %u\n", dss.ctx_id); -+ -+ r = dss_init(); -+ if (r) { -+ DSSERR("Failed to initialize DSS\n"); -+ goto fail0; -+ } -+ -+#ifdef CONFIG_OMAP2_DSS_RFBI -+ r = rfbi_init(); -+ if (r) { -+ DSSERR("Failed to initialize rfbi\n"); -+ goto fail0; -+ } -+#endif -+ -+ r = dpi_init(); -+ if (r) { -+ DSSERR("Failed to initialize dpi\n"); -+ goto fail0; -+ } -+ -+ r = dispc_init(); -+ if (r) { -+ DSSERR("Failed to initialize dispc\n"); -+ goto fail0; -+ } -+#ifdef CONFIG_OMAP2_DSS_VENC -+ r = venc_init(); -+ if (r) { -+ DSSERR("Failed to initialize venc\n"); -+ goto fail0; -+ } -+#endif -+ if (cpu_is_omap34xx()) { -+#ifdef CONFIG_OMAP2_DSS_SDI -+ r = sdi_init(); -+ if (r) { -+ DSSERR("Failed to initialize SDI\n"); -+ goto fail0; -+ } -+#endif -+#ifdef CONFIG_OMAP2_DSS_DSI -+ r = dsi_init(); -+ if (r) { -+ DSSERR("Failed to initialize DSI\n"); -+ goto fail0; -+ } -+#endif -+ } -+ -+ initialize_displays(pdata); -+ -+ r = initialize_sysfs(&pdev->dev); -+ if (r) -+ goto fail0; -+ -+ initialize_overlays(); -+ -+ dss_clk_disable_all(); -+ -+ return 0; -+ -+ /* XXX fail correctly */ -+fail0: -+ return r; -+} -+ -+static int omap_dss_remove(struct platform_device *pdev) -+{ -+ uninitialize_sysfs(&pdev->dev); -+ -+#ifdef CONFIG_OMAP2_DSS_VENC -+ venc_exit(); -+#endif -+ dispc_exit(); -+ dpi_exit(); -+#ifdef CONFIG_OMAP2_DSS_RFBI -+ rfbi_exit(); -+#endif -+ if (cpu_is_omap34xx()) { -+#ifdef CONFIG_OMAP2_DSS_DSI -+ dsi_exit(); -+#endif -+#ifdef CONFIG_OMAP2_DSS_SDI -+ sdi_exit(); -+#endif -+ } -+ -+ dss_exit(); -+ -+ return 0; -+} -+ -+ -+static struct platform_driver omap_dss_driver = { -+ .probe = omap_dss_probe, -+ .remove = omap_dss_remove, -+ .driver = { -+ .name = "omap-dss", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init omap_dss_init(void) -+{ -+ return platform_driver_register(&omap_dss_driver); -+} -+ -+static void __exit omap_dss_exit(void) -+{ -+ platform_driver_unregister(&omap_dss_driver); -+} -+ -+subsys_initcall(omap_dss_init); -+module_exit(omap_dss_exit); -+ -+ -+MODULE_AUTHOR("Tomi Valkeinen "); -+MODULE_DESCRIPTION("OMAP2/3 Display Subsystem"); -+MODULE_LICENSE("GPL v2"); -+ -diff --git a/arch/arm/plat-omap/dss/dss.h b/arch/arm/plat-omap/dss/dss.h -new file mode 100644 -index 0000000..04abdc6 ---- /dev/null -+++ b/arch/arm/plat-omap/dss/dss.h -@@ -0,0 +1,268 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/dss.h -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#ifndef __OMAP2_DSS_H -+#define __OMAP2_DSS_H -+ -+#ifdef CONFIG_OMAP2_DSS_DEBUG -+#define DEBUG -+#endif -+ -+#ifdef DEBUG -+#ifdef DSS_SUBSYS_NAME -+#define DSSDBG(format, ...) \ -+ printk(KERN_DEBUG "omap-dss " DSS_SUBSYS_NAME ": " format, \ -+ ## __VA_ARGS__) -+#else -+#define DSSDBG(format, ...) \ -+ printk(KERN_DEBUG "omap-dss: " format, ## __VA_ARGS__) -+#endif -+#else -+#define DSSDBG(format, ...) -+#endif -+ -+#ifdef DSS_SUBSYS_NAME -+#define DSSERR(format, ...) \ -+ printk(KERN_ERR "omap-dss " DSS_SUBSYS_NAME " error: " format, \ -+ ## __VA_ARGS__) -+#else -+#define DSSERR(format, ...) \ -+ printk(KERN_ERR "omap-dss error: " format, ## __VA_ARGS__) -+#endif -+ -+#ifdef DSS_SUBSYS_NAME -+#define DSSINFO(format, ...) \ -+ printk(KERN_INFO "omap-dss " DSS_SUBSYS_NAME ": " format, \ -+ ## __VA_ARGS__) -+#else -+#define DSSINFO(format, ...) \ -+ printk(KERN_INFO "omap-dss: " format, ## __VA_ARGS__) -+#endif -+ -+#ifdef DSS_SUBSYS_NAME -+#define DSSWARN(format, ...) \ -+ printk(KERN_WARNING "omap-dss " DSS_SUBSYS_NAME ": " format, \ -+ ## __VA_ARGS__) -+#else -+#define DSSWARN(format, ...) \ -+ printk(KERN_WARNING "omap-dss: " format, ## __VA_ARGS__) -+#endif -+ -+/* OMAP TRM gives bitfields as start:end, where start is the higher bit -+ number. For example 7:0 */ -+#define FLD_MASK(start, end) (((1 << (start - end + 1)) - 1) << (end)) -+#define FLD_VAL(val, start, end) (((val) << end) & FLD_MASK(start, end)) -+#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end)) -+#define FLD_MOD(orig, val, start, end) \ -+ (((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end)) -+ -+#define DISPC_MAX_FCK 173000000 -+ -+enum omap_burst_size { -+ OMAP_DSS_BURST_4x32 = 0, -+ OMAP_DSS_BURST_8x32 = 1, -+ OMAP_DSS_BURST_16x32 = 2, -+}; -+ -+enum omap_parallel_interface_mode { -+ OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */ -+ OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */ -+ OMAP_DSS_PARALLELMODE_DSI, -+}; -+ -+enum dss_clock { -+ DSS_CLK_ICK = 1 << 0, -+ DSS_CLK_FCK1 = 1 << 1, -+ DSS_CLK_FCK2 = 1 << 2, -+ DSS_CLK_54M = 1 << 3, -+ DSS_CLK_96M = 1 << 4, -+}; -+ -+struct dispc_clock_info { -+ /* rates that we get with dividers below */ -+ unsigned long fck; -+ unsigned long lck; -+ unsigned long pck; -+ -+ /* dividers */ -+ int fck_div; -+ int lck_div; -+ int pck_div; -+}; -+ -+struct dsi_clock_info { -+ /* rates that we get with dividers below */ -+ unsigned long fint; -+ unsigned long dsiphy; -+ unsigned long clkin; /* input clk for DSI PLL */ -+ unsigned long dispc_fck; /* output clk, DSI1_PLL_FCLK */ -+ unsigned long dsi_fck; /* output clk, DSI2_PLL_FCLK */ -+ unsigned long lck; -+ unsigned long pck; -+ -+ /* dividers */ -+ int regn; -+ int regm; -+ int regm3; -+ int regm4; -+ -+ int lck_div; -+ int pck_div; -+ -+ int highfreq; -+ int use_dss2_fck; -+}; -+ -+int initialize_sysfs(struct device *dev); -+void uninitialize_sysfs(struct device *dev); -+void initialize_displays(struct omap_dss_platform_data *pdata); -+void initialize_overlays(void); -+ -+/* DSS */ -+int dss_init(void); -+void dss_exit(void); -+ -+void dss_clk_enable(enum dss_clock clks); -+void dss_clk_disable(enum dss_clock clks); -+ -+void dss_sdi_init(int datapairs); -+void dss_select_clk_source(int dsi, int dispc); -+int dss_get_dsi_clk_source(void); -+int dss_get_dispc_clk_source(void); -+void dss_set_venc_output(enum omap_dss_venc_type type); -+void dss_set_dac_pwrdn_bgz(int enable); -+unsigned long dss_clk_get_rate(enum dss_clock clk); -+ssize_t dss_print_clocks(char *buf, ssize_t size); -+ -+/* SDI */ -+int sdi_init(void); -+void sdi_exit(void); -+void sdi_init_display(struct omap_display *display); -+ -+ -+/* DSI */ -+int dsi_init(void); -+void dsi_exit(void); -+ -+void dsi_save_context(void); -+void dsi_restore_context(void); -+ -+void dsi_init_display(struct omap_display *display); -+void dsi_irq_handler(void); -+unsigned long dsi_get_dsi1_pll_rate(void); -+unsigned long dsi_get_dsi2_pll_rate(void); -+int dsi_pll_calc_pck(int is_tft, unsigned long req_pck, -+ struct dsi_clock_info *cinfo); -+int dsi_pll_program(struct dsi_clock_info *cinfo); -+int dsi_pll_init(int enable_hsclk, int enable_hsdiv); -+void dsi_pll_uninit(void); -+ssize_t dsi_print_clocks(char *buf, ssize_t size); -+ -+/* DPI */ -+int dpi_init(void); -+void dpi_exit(void); -+void dpi_init_display(struct omap_display *display); -+ -+/* DISPC */ -+int dispc_init(void); -+void dispc_exit(void); -+void dispc_irq_handler(void); -+void dispc_fake_vsync_irq(void); -+ -+void dispc_save_context(void); -+void dispc_restore_context(void); -+ -+void dispc_lcd_enable_signal_polarity(int act_high); -+void dispc_lcd_enable_signal(int enable); -+void dispc_pck_free_enable(int enable); -+void dispc_enable_fifohandcheck(int enable); -+ -+void dispc_set_lcd_size(int width, int height); -+void dispc_set_digit_size(int width, int height); -+void dispc_setup_plane_fifo(enum omap_plane plane, int ext_mode); -+ -+void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr); -+void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr); -+void dispc_set_plane_pos(enum omap_plane plane, int x, int y); -+void dispc_set_plane_size(enum omap_plane plane, int width, int height); -+void dispc_set_row_inc(enum omap_plane plane, int inc); -+ -+int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, -+ u32 paddr, int screen_width, -+ int pos_x, int pos_y, -+ int width, int height, -+ int out_width, int out_height, -+ enum omap_color_mode color_mode, -+ int ilace); -+ -+void dispc_go(enum omap_channel channel); -+void dispc_enable_lcd_out(int enable); -+void dispc_enable_digit_out(int enable); -+int dispc_enable_plane(enum omap_plane plane, int enable); -+ -+void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode); -+void dispc_set_tft_data_lines(int data_lines); -+void dispc_set_lcd_display_type(enum omap_lcd_display_type type); -+void dispc_set_loadmode(enum omap_dss_load_mode mode); -+ -+void dispc_set_default_color(enum omap_channel channel, u32 color); -+void dispc_set_trans_key(enum omap_channel ch, -+ enum omap_dss_color_key_type type, -+ u32 trans_key); -+void dispc_enable_trans_key(enum omap_channel ch, int enable); -+ -+void dispc_set_lcd_timings(struct omap_video_timings *timings); -+unsigned long dispc_fclk_rate(void); -+unsigned long dispc_pclk_rate(void); -+void dispc_set_pol_freq(struct omap_panel *panel); -+void find_lck_pck_divs(int is_tft, unsigned long req_pck, unsigned long fck, -+ int *lck_div, int *pck_div); -+int dispc_calc_clock_div(int is_tft, unsigned long req_pck, -+ struct dispc_clock_info *cinfo); -+int dispc_set_clock_div(struct dispc_clock_info *cinfo); -+void dispc_set_lcd_divisor(int lck_div, int pck_div); -+ -+void dispc_setup_partial_planes(struct omap_display *display, -+ int *x, int *y, int *w, int *h); -+void dispc_draw_partial_planes(struct omap_display *display); -+ -+ -+ssize_t dispc_print_clocks(char *buf, ssize_t size); -+ -+/* VENC */ -+int venc_init(void); -+void venc_exit(void); -+void venc_init_display(struct omap_display *display); -+ -+/* RFBI */ -+int rfbi_init(void); -+void rfbi_exit(void); -+ -+int rfbi_configure(int rfbi_module, int bpp, int lines); -+void rfbi_enable_rfbi(int enable); -+void rfbi_transfer_area(int width, int height, -+ void (callback)(void *data), void *data); -+void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); -+unsigned long rfbi_get_max_tx_rate(void); -+void rfbi_init_display(struct omap_display *display); -+ -+#endif -diff --git a/arch/arm/plat-omap/dss/rfbi.c b/arch/arm/plat-omap/dss/rfbi.c -new file mode 100644 -index 0000000..eaf6e2c ---- /dev/null -+++ b/arch/arm/plat-omap/dss/rfbi.c -@@ -0,0 +1,1225 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/rfbi.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#define DSS_SUBSYS_NAME "RFBI" -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "dss.h" -+ -+/*#define MEASURE_PERF*/ -+ -+#define RFBI_BASE 0x48050800 -+ -+struct rfbi_reg { u16 idx; }; -+ -+#define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) -+ -+#define RFBI_REVISION RFBI_REG(0x0000) -+#define RFBI_SYSCONFIG RFBI_REG(0x0010) -+#define RFBI_SYSSTATUS RFBI_REG(0x0014) -+#define RFBI_CONTROL RFBI_REG(0x0040) -+#define RFBI_PIXEL_CNT RFBI_REG(0x0044) -+#define RFBI_LINE_NUMBER RFBI_REG(0x0048) -+#define RFBI_CMD RFBI_REG(0x004c) -+#define RFBI_PARAM RFBI_REG(0x0050) -+#define RFBI_DATA RFBI_REG(0x0054) -+#define RFBI_READ RFBI_REG(0x0058) -+#define RFBI_STATUS RFBI_REG(0x005c) -+ -+#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) -+#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) -+#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) -+#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) -+#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) -+#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) -+ -+#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) -+#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) -+ -+#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param)) -+ -+#define REG_FLD_MOD(idx, val, start, end) \ -+ rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) -+ -+/* To work around an RFBI transfer rate limitation */ -+#define OMAP_RFBI_RATE_LIMIT 1 -+ -+enum omap_rfbi_cycleformat { -+ OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, -+ OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, -+ OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, -+ OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, -+}; -+ -+enum omap_rfbi_datatype { -+ OMAP_DSS_RFBI_DATATYPE_12 = 0, -+ OMAP_DSS_RFBI_DATATYPE_16 = 1, -+ OMAP_DSS_RFBI_DATATYPE_18 = 2, -+ OMAP_DSS_RFBI_DATATYPE_24 = 3, -+}; -+ -+enum omap_rfbi_parallelmode { -+ OMAP_DSS_RFBI_PARALLELMODE_8 = 0, -+ OMAP_DSS_RFBI_PARALLELMODE_9 = 1, -+ OMAP_DSS_RFBI_PARALLELMODE_12 = 2, -+ OMAP_DSS_RFBI_PARALLELMODE_16 = 3, -+}; -+ -+enum update_cmd { -+ RFBI_CMD_UPDATE = 0, -+ RFBI_CMD_SYNC = 1, -+}; -+ -+static int rfbi_convert_timings(struct rfbi_timings *t); -+static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); -+static void process_cmd_fifo(void); -+ -+static struct { -+ void __iomem *base; -+ -+ unsigned long l4_khz; -+ -+ enum omap_rfbi_datatype datatype; -+ enum omap_rfbi_parallelmode parallelmode; -+ -+ enum omap_rfbi_te_mode te_mode; -+ int te_enabled; -+ -+ void (*framedone_callback)(void *data); -+ void *framedone_callback_data; -+ -+ struct omap_display *display[2]; -+ -+ struct kfifo *cmd_fifo; -+ spinlock_t cmd_lock; -+ struct completion cmd_done; -+ atomic_t cmd_fifo_full; -+ atomic_t cmd_pending; -+#ifdef MEASURE_PERF -+ ktime_t perf_time; -+#endif -+} rfbi; -+ -+struct update_region { -+ u16 x; -+ u16 y; -+ u16 w; -+ u16 h; -+}; -+ -+struct update_param { -+ u8 rfbi_module; -+ u8 cmd; -+ -+ union { -+ struct update_region r; -+ struct completion *sync; -+ } par; -+}; -+ -+static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) -+{ -+ __raw_writel(val, rfbi.base + idx.idx); -+} -+ -+static inline u32 rfbi_read_reg(const struct rfbi_reg idx) -+{ -+ return __raw_readl(rfbi.base + idx.idx); -+} -+ -+static void rfbi_enable_clocks(int enable) -+{ -+ if (enable) -+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ else -+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); -+} -+ -+void omap_rfbi_write_command(const void *buf, u32 len) -+{ -+ rfbi_enable_clocks(1); -+ switch (rfbi.parallelmode) { -+ case OMAP_DSS_RFBI_PARALLELMODE_8: -+ { -+ const u8 *b = buf; -+ for (; len; len--) -+ rfbi_write_reg(RFBI_CMD, *b++); -+ break; -+ } -+ -+ case OMAP_DSS_RFBI_PARALLELMODE_16: -+ { -+ const u16 *w = buf; -+ BUG_ON(len & 1); -+ for (; len; len -= 2) -+ rfbi_write_reg(RFBI_CMD, *w++); -+ break; -+ } -+ -+ case OMAP_DSS_RFBI_PARALLELMODE_9: -+ case OMAP_DSS_RFBI_PARALLELMODE_12: -+ default: -+ BUG(); -+ } -+ rfbi_enable_clocks(0); -+} -+EXPORT_SYMBOL(omap_rfbi_write_command); -+ -+void omap_rfbi_read_data(void *buf, u32 len) -+{ -+ rfbi_enable_clocks(1); -+ switch (rfbi.parallelmode) { -+ case OMAP_DSS_RFBI_PARALLELMODE_8: -+ { -+ u8 *b = buf; -+ for (; len; len--) { -+ rfbi_write_reg(RFBI_READ, 0); -+ *b++ = rfbi_read_reg(RFBI_READ); -+ } -+ break; -+ } -+ -+ case OMAP_DSS_RFBI_PARALLELMODE_16: -+ { -+ u16 *w = buf; -+ BUG_ON(len & ~1); -+ for (; len; len -= 2) { -+ rfbi_write_reg(RFBI_READ, 0); -+ *w++ = rfbi_read_reg(RFBI_READ); -+ } -+ break; -+ } -+ -+ case OMAP_DSS_RFBI_PARALLELMODE_9: -+ case OMAP_DSS_RFBI_PARALLELMODE_12: -+ default: -+ BUG(); -+ } -+ rfbi_enable_clocks(0); -+} -+EXPORT_SYMBOL(omap_rfbi_read_data); -+ -+void omap_rfbi_write_data(const void *buf, u32 len) -+{ -+ rfbi_enable_clocks(1); -+ switch (rfbi.parallelmode) { -+ case OMAP_DSS_RFBI_PARALLELMODE_8: -+ { -+ const u8 *b = buf; -+ for (; len; len--) -+ rfbi_write_reg(RFBI_PARAM, *b++); -+ break; -+ } -+ -+ case OMAP_DSS_RFBI_PARALLELMODE_16: -+ { -+ const u16 *w = buf; -+ BUG_ON(len & 1); -+ for (; len; len -= 2) -+ rfbi_write_reg(RFBI_PARAM, *w++); -+ break; -+ } -+ -+ case OMAP_DSS_RFBI_PARALLELMODE_9: -+ case OMAP_DSS_RFBI_PARALLELMODE_12: -+ default: -+ BUG(); -+ -+ } -+ rfbi_enable_clocks(0); -+} -+EXPORT_SYMBOL(omap_rfbi_write_data); -+ -+void omap_rfbi_write_pixels(const void *buf, int scr_width, int x, int y, -+ int w, int h) -+{ -+ int start_offset = scr_width * y + x; -+ int horiz_offset = scr_width - w; -+ int i; -+ -+ rfbi_enable_clocks(1); -+ -+ if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && -+ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { -+ const u16 *pd = buf; -+ pd += start_offset; -+ -+ for (; h; --h) { -+ for (i = 0; i < w; ++i) { -+ const u8 *b = (const u8 *)pd; -+ rfbi_write_reg(RFBI_PARAM, *(b+1)); -+ rfbi_write_reg(RFBI_PARAM, *(b+0)); -+ ++pd; -+ } -+ pd += horiz_offset; -+ } -+ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && -+ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { -+ const u32 *pd = buf; -+ pd += start_offset; -+ -+ for (; h; --h) { -+ for (i = 0; i < w; ++i) { -+ const u8 *b = (const u8 *)pd; -+ rfbi_write_reg(RFBI_PARAM, *(b+2)); -+ rfbi_write_reg(RFBI_PARAM, *(b+1)); -+ rfbi_write_reg(RFBI_PARAM, *(b+0)); -+ ++pd; -+ } -+ pd += horiz_offset; -+ } -+ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && -+ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { -+ const u16 *pd = buf; -+ pd += start_offset; -+ -+ for (; h; --h) { -+ for (i = 0; i < w; ++i) { -+ rfbi_write_reg(RFBI_PARAM, *pd); -+ ++pd; -+ } -+ pd += horiz_offset; -+ } -+ } else { -+ BUG(); -+ } -+ -+ rfbi_enable_clocks(0); -+} -+EXPORT_SYMBOL(omap_rfbi_write_pixels); -+ -+void rfbi_transfer_area(int width, int height, -+ void (callback)(void *data), void *data) -+{ -+ u32 l; -+ -+ /*BUG_ON(callback == 0);*/ -+ BUG_ON(rfbi.framedone_callback != NULL); -+ -+ DSSDBG("rfbi_transfer_area %dx%d\n", width, height); -+ -+ dispc_set_lcd_size(width, height); -+ -+ dispc_enable_lcd_out(1); -+ -+ rfbi.framedone_callback = callback; -+ rfbi.framedone_callback_data = data; -+ -+ rfbi_enable_clocks(1); -+ -+#ifdef MEASURE_PERF -+ rfbi.perf_time = ktime_get(); -+#endif -+ rfbi_write_reg(RFBI_PIXEL_CNT, width * height); -+ -+ l = rfbi_read_reg(RFBI_CONTROL); -+ l = FLD_MOD(l, 1, 0, 0); /* enable */ -+ if (!rfbi.te_enabled) -+ l = FLD_MOD(l, 1, 4, 4); /* ITE */ -+ -+ rfbi_write_reg(RFBI_CONTROL, l); -+} -+ -+static void framedone_callback(void *data, u32 mask) -+{ -+ void (*callback)(void *data); -+ -+#ifdef MEASURE_PERF -+ { -+ ktime_t t = ktime_get(); -+ t = ktime_sub(t, rfbi.perf_time); -+ DSSDBG("FRAMEDONE in %lld ns\n", ktime_to_ns(t)); -+ } -+#else -+ DSSDBG("FRAMEDONE\n"); -+#endif -+ -+ REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); -+ -+ rfbi_enable_clocks(0); -+ -+ callback = rfbi.framedone_callback; -+ rfbi.framedone_callback = NULL; -+ -+ /*callback(rfbi.framedone_callback_data);*/ -+ -+ atomic_set(&rfbi.cmd_pending, 0); -+ -+ process_cmd_fifo(); -+} -+ -+#if 1 /* VERBOSE */ -+static void rfbi_print_timings(void) -+{ -+ u32 l; -+ u32 time; -+ -+ l = rfbi_read_reg(RFBI_CONFIG(0)); -+ time = 1000000000 / rfbi.l4_khz; -+ if (l & (1 << 4)) -+ time *= 2; -+ -+ DSSDBG("Tick time %u ps\n", time); -+ l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); -+ DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " -+ "REONTIME %d, REOFFTIME %d\n", -+ l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, -+ (l >> 20) & 0x0f, (l >> 24) & 0x3f); -+ -+ l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); -+ DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " -+ "ACCESSTIME %d\n", -+ (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, -+ (l >> 22) & 0x3f); -+} -+#else -+static void rfbi_print_timings(void) {} -+#endif -+ -+ -+ -+ -+static u32 extif_clk_period; -+ -+static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) -+{ -+ int bus_tick = extif_clk_period * div; -+ return (ps + bus_tick - 1) / bus_tick * bus_tick; -+} -+ -+static int calc_reg_timing(struct rfbi_timings *t, int div) -+{ -+ t->clk_div = div; -+ -+ t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); -+ -+ t->we_on_time = round_to_extif_ticks(t->we_on_time, div); -+ t->we_off_time = round_to_extif_ticks(t->we_off_time, div); -+ t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); -+ -+ t->re_on_time = round_to_extif_ticks(t->re_on_time, div); -+ t->re_off_time = round_to_extif_ticks(t->re_off_time, div); -+ t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); -+ -+ t->access_time = round_to_extif_ticks(t->access_time, div); -+ t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); -+ t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); -+ -+ DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", -+ t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); -+ DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", -+ t->we_on_time, t->we_off_time, t->re_cycle_time, -+ t->we_cycle_time); -+ DSSDBG("[reg]rdaccess %d cspulse %d\n", -+ t->access_time, t->cs_pulse_width); -+ -+ return rfbi_convert_timings(t); -+} -+ -+static int calc_extif_timings(struct rfbi_timings *t) -+{ -+ u32 max_clk_div; -+ int div; -+ -+ rfbi_get_clk_info(&extif_clk_period, &max_clk_div); -+ for (div = 1; div <= max_clk_div; div++) { -+ if (calc_reg_timing(t, div) == 0) -+ break; -+ } -+ -+ if (div <= max_clk_div) -+ return 0; -+ -+ DSSERR("can't setup timings\n"); -+ return -1; -+} -+ -+ -+void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) -+{ -+ int r; -+ -+ if (!t->converted) { -+ r = calc_extif_timings(t); -+ if (r < 0) -+ DSSERR("Failed to calc timings\n"); -+ } -+ -+ BUG_ON(!t->converted); -+ -+ rfbi_enable_clocks(1); -+ rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); -+ rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); -+ -+ /* TIMEGRANULARITY */ -+ REG_FLD_MOD(RFBI_CONFIG(rfbi_module), -+ (t->tim[2] ? 1 : 0), 4, 4); -+ -+ rfbi_print_timings(); -+ rfbi_enable_clocks(0); -+} -+ -+static int ps_to_rfbi_ticks(int time, int div) -+{ -+ unsigned long tick_ps; -+ int ret; -+ -+ /* Calculate in picosecs to yield more exact results */ -+ tick_ps = 1000000000 / (rfbi.l4_khz) * div; -+ -+ ret = (time + tick_ps - 1) / tick_ps; -+ -+ return ret; -+} -+ -+#ifdef OMAP_RFBI_RATE_LIMIT -+unsigned long rfbi_get_max_tx_rate(void) -+{ -+ unsigned long l4_rate, dss1_rate; -+ int min_l4_ticks = 0; -+ int i; -+ -+ /* According to TI this can't be calculated so make the -+ * adjustments for a couple of known frequencies and warn for -+ * others. -+ */ -+ static const struct { -+ unsigned long l4_clk; /* HZ */ -+ unsigned long dss1_clk; /* HZ */ -+ unsigned long min_l4_ticks; -+ } ftab[] = { -+ { 55, 132, 7, }, /* 7.86 MPix/s */ -+ { 110, 110, 12, }, /* 9.16 MPix/s */ -+ { 110, 132, 10, }, /* 11 Mpix/s */ -+ { 120, 120, 10, }, /* 12 Mpix/s */ -+ { 133, 133, 10, }, /* 13.3 Mpix/s */ -+ }; -+ -+ l4_rate = rfbi.l4_khz / 1000; -+ dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000; -+ -+ for (i = 0; i < ARRAY_SIZE(ftab); i++) { -+ /* Use a window instead of an exact match, to account -+ * for different DPLL multiplier / divider pairs. -+ */ -+ if (abs(ftab[i].l4_clk - l4_rate) < 3 && -+ abs(ftab[i].dss1_clk - dss1_rate) < 3) { -+ min_l4_ticks = ftab[i].min_l4_ticks; -+ break; -+ } -+ } -+ if (i == ARRAY_SIZE(ftab)) { -+ /* Can't be sure, return anyway the maximum not -+ * rate-limited. This might cause a problem only for the -+ * tearing synchronisation. -+ */ -+ DSSERR("can't determine maximum RFBI transfer rate\n"); -+ return rfbi.l4_khz * 1000; -+ } -+ return rfbi.l4_khz * 1000 / min_l4_ticks; -+} -+#else -+int rfbi_get_max_tx_rate(void) -+{ -+ return rfbi.l4_khz * 1000; -+} -+#endif -+ -+static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) -+{ -+ *clk_period = 1000000000 / rfbi.l4_khz; -+ *max_clk_div = 2; -+} -+ -+static int rfbi_convert_timings(struct rfbi_timings *t) -+{ -+ u32 l; -+ int reon, reoff, weon, weoff, cson, csoff, cs_pulse; -+ int actim, recyc, wecyc; -+ int div = t->clk_div; -+ -+ if (div <= 0 || div > 2) -+ return -1; -+ -+ /* Make sure that after conversion it still holds that: -+ * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, -+ * csoff > cson, csoff >= max(weoff, reoff), actim > reon -+ */ -+ weon = ps_to_rfbi_ticks(t->we_on_time, div); -+ weoff = ps_to_rfbi_ticks(t->we_off_time, div); -+ if (weoff <= weon) -+ weoff = weon + 1; -+ if (weon > 0x0f) -+ return -1; -+ if (weoff > 0x3f) -+ return -1; -+ -+ reon = ps_to_rfbi_ticks(t->re_on_time, div); -+ reoff = ps_to_rfbi_ticks(t->re_off_time, div); -+ if (reoff <= reon) -+ reoff = reon + 1; -+ if (reon > 0x0f) -+ return -1; -+ if (reoff > 0x3f) -+ return -1; -+ -+ cson = ps_to_rfbi_ticks(t->cs_on_time, div); -+ csoff = ps_to_rfbi_ticks(t->cs_off_time, div); -+ if (csoff <= cson) -+ csoff = cson + 1; -+ if (csoff < max(weoff, reoff)) -+ csoff = max(weoff, reoff); -+ if (cson > 0x0f) -+ return -1; -+ if (csoff > 0x3f) -+ return -1; -+ -+ l = cson; -+ l |= csoff << 4; -+ l |= weon << 10; -+ l |= weoff << 14; -+ l |= reon << 20; -+ l |= reoff << 24; -+ -+ t->tim[0] = l; -+ -+ actim = ps_to_rfbi_ticks(t->access_time, div); -+ if (actim <= reon) -+ actim = reon + 1; -+ if (actim > 0x3f) -+ return -1; -+ -+ wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); -+ if (wecyc < weoff) -+ wecyc = weoff; -+ if (wecyc > 0x3f) -+ return -1; -+ -+ recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); -+ if (recyc < reoff) -+ recyc = reoff; -+ if (recyc > 0x3f) -+ return -1; -+ -+ cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); -+ if (cs_pulse > 0x3f) -+ return -1; -+ -+ l = wecyc; -+ l |= recyc << 6; -+ l |= cs_pulse << 12; -+ l |= actim << 22; -+ -+ t->tim[1] = l; -+ -+ t->tim[2] = div - 1; -+ -+ t->converted = 1; -+ -+ return 0; -+} -+ -+/* xxx FIX module selection missing */ -+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, -+ unsigned hs_pulse_time, unsigned vs_pulse_time, -+ int hs_pol_inv, int vs_pol_inv, int extif_div) -+{ -+ int hs, vs; -+ int min; -+ u32 l; -+ -+ hs = ps_to_rfbi_ticks(hs_pulse_time, 1); -+ vs = ps_to_rfbi_ticks(vs_pulse_time, 1); -+ if (hs < 2) -+ return -EDOM; -+ if (mode == OMAP_DSS_RFBI_TE_MODE_2) -+ min = 2; -+ else /* OMAP_DSS_RFBI_TE_MODE_1 */ -+ min = 4; -+ if (vs < min) -+ return -EDOM; -+ if (vs == hs) -+ return -EINVAL; -+ rfbi.te_mode = mode; -+ DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", -+ mode, hs, vs, hs_pol_inv, vs_pol_inv); -+ -+ rfbi_enable_clocks(1); -+ rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); -+ rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); -+ -+ l = rfbi_read_reg(RFBI_CONFIG(0)); -+ if (hs_pol_inv) -+ l &= ~(1 << 21); -+ else -+ l |= 1 << 21; -+ if (vs_pol_inv) -+ l &= ~(1 << 20); -+ else -+ l |= 1 << 20; -+ rfbi_enable_clocks(0); -+ -+ return 0; -+} -+EXPORT_SYMBOL(omap_rfbi_setup_te); -+ -+/* xxx FIX module selection missing */ -+int omap_rfbi_enable_te(int enable, unsigned line) -+{ -+ u32 l; -+ -+ DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); -+ if (line > (1 << 11) - 1) -+ return -EINVAL; -+ -+ rfbi_enable_clocks(1); -+ l = rfbi_read_reg(RFBI_CONFIG(0)); -+ l &= ~(0x3 << 2); -+ if (enable) { -+ rfbi.te_enabled = 1; -+ l |= rfbi.te_mode << 2; -+ } else -+ rfbi.te_enabled = 0; -+ rfbi_write_reg(RFBI_CONFIG(0), l); -+ rfbi_write_reg(RFBI_LINE_NUMBER, line); -+ rfbi_enable_clocks(0); -+ -+ return 0; -+} -+EXPORT_SYMBOL(omap_rfbi_enable_te); -+ -+#if 0 -+static void rfbi_enable_config(int enable1, int enable2) -+{ -+ u32 l; -+ int cs = 0; -+ -+ if (enable1) -+ cs |= 1<<0; -+ if (enable2) -+ cs |= 1<<1; -+ -+ rfbi_enable_clocks(1); -+ -+ l = rfbi_read_reg(RFBI_CONTROL); -+ -+ l = FLD_MOD(l, cs, 3, 2); -+ l = FLD_MOD(l, 0, 1, 1); -+ -+ rfbi_write_reg(RFBI_CONTROL, l); -+ -+ -+ l = rfbi_read_reg(RFBI_CONFIG(0)); -+ l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ -+ /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ -+ /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ -+ -+ l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ -+ l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ -+ l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ -+ -+ l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); -+ rfbi_write_reg(RFBI_CONFIG(0), l); -+ -+ rfbi_enable_clocks(0); -+} -+#endif -+ -+int rfbi_configure(int rfbi_module, int bpp, int lines) -+{ -+ u32 l; -+ int cycle1 = 0, cycle2 = 0, cycle3 = 0; -+ enum omap_rfbi_cycleformat cycleformat; -+ enum omap_rfbi_datatype datatype; -+ enum omap_rfbi_parallelmode parallelmode; -+ -+ switch (bpp) { -+ case 12: -+ datatype = OMAP_DSS_RFBI_DATATYPE_12; -+ break; -+ case 16: -+ datatype = OMAP_DSS_RFBI_DATATYPE_16; -+ break; -+ case 18: -+ datatype = OMAP_DSS_RFBI_DATATYPE_18; -+ break; -+ case 24: -+ datatype = OMAP_DSS_RFBI_DATATYPE_24; -+ break; -+ default: -+ BUG(); -+ return 1; -+ } -+ rfbi.datatype = datatype; -+ -+ switch (lines) { -+ case 8: -+ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; -+ break; -+ case 9: -+ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; -+ break; -+ case 12: -+ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; -+ break; -+ case 16: -+ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; -+ break; -+ default: -+ BUG(); -+ return 1; -+ } -+ rfbi.parallelmode = parallelmode; -+ -+ if ((bpp % lines) == 0) { -+ switch (bpp / lines) { -+ case 1: -+ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; -+ break; -+ case 2: -+ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; -+ break; -+ case 3: -+ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; -+ break; -+ default: -+ BUG(); -+ return 1; -+ } -+ } else if ((2 * bpp % lines) == 0) { -+ if ((2 * bpp / lines) == 3) -+ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; -+ else { -+ BUG(); -+ return 1; -+ } -+ } else { -+ BUG(); -+ return 1; -+ } -+ -+ switch (cycleformat) { -+ case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: -+ cycle1 = lines; -+ break; -+ -+ case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: -+ cycle1 = lines; -+ cycle2 = lines; -+ break; -+ -+ case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: -+ cycle1 = lines; -+ cycle2 = lines; -+ cycle3 = lines; -+ break; -+ -+ case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: -+ cycle1 = lines; -+ cycle2 = (lines / 2) | ((lines / 2) << 16); -+ cycle3 = (lines << 16); -+ break; -+ } -+ -+ rfbi_enable_clocks(1); -+ -+ REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ -+ -+ l = 0; -+ l |= FLD_VAL(parallelmode, 1, 0); -+ l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ -+ l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ -+ l |= FLD_VAL(datatype, 6, 5); -+ /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ -+ l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ -+ l |= FLD_VAL(cycleformat, 10, 9); -+ l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ -+ l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ -+ l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ -+ l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ -+ l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ -+ l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ -+ l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ -+ rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); -+ -+ rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); -+ rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); -+ rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); -+ -+ -+ l = rfbi_read_reg(RFBI_CONTROL); -+ l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ -+ l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ -+ rfbi_write_reg(RFBI_CONTROL, l); -+ -+ -+ DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", -+ bpp, lines, cycle1, cycle2, cycle3); -+ -+ rfbi_enable_clocks(0); -+ -+ return 0; -+} -+ -+static int rfbi_find_display(struct omap_display *disp) -+{ -+ if (disp == rfbi.display[0]) -+ return 0; -+ -+ if (disp == rfbi.display[1]) -+ return 1; -+ -+ BUG(); -+ return -1; -+} -+ -+ -+static void signal_fifo_waiters(void) -+{ -+ if (atomic_read(&rfbi.cmd_fifo_full) > 0) { -+ /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */ -+ complete(&rfbi.cmd_done); -+ atomic_dec(&rfbi.cmd_fifo_full); -+ } -+} -+ -+/* returns 1 for async op, and 0 for sync op */ -+static int do_update(struct omap_display *display, struct update_region *upd) -+{ -+ int x = upd->x; -+ int y = upd->y; -+ int w = upd->w; -+ int h = upd->h; -+ -+ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { -+ /*display->ctrl->enable_te(display, 1); */ -+ -+ dispc_setup_partial_planes(display, &x, &y, &w, &h); -+ -+ display->ctrl->setup_update(display, x, y, w, h); -+ -+ rfbi_transfer_area(w, h, NULL, NULL); -+ -+ return 1; -+ } else { -+ struct omap_overlay *ovl; -+ void *addr; -+ int scr_width; -+#ifdef MEASURE_PERF -+ ktime_t t1, t2; -+#endif -+ ovl = &display->manager->overlays[0]; -+ scr_width = ovl->info.screen_width; -+ addr = ovl->info.vaddr; -+ -+ display->ctrl->setup_update(display, x, y, w, h); -+ -+#ifdef MEASURE_PERF -+ t1 = ktime_get(); -+#endif -+ omap_rfbi_write_pixels(addr, scr_width, -+ x, y, w, h); -+#ifdef MEASURE_PERF -+ t2 = ktime_get(); -+ t1 = ktime_sub(t2, t1); -+ DSSDBG("L4 FRAMEDONE in %lld ns\n", -+ ktime_to_ns(t1)); -+#endif -+ return 0; -+ } -+} -+ -+static void process_cmd_fifo(void) -+{ -+ int len; -+ struct update_param p; -+ struct omap_display *display; -+ unsigned long flags; -+ -+ if (atomic_inc_return(&rfbi.cmd_pending) != 1) -+ return; -+ -+ while (true) { -+ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); -+ -+ len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, -+ sizeof(struct update_param)); -+ if (len == 0) { -+ DSSDBG("nothing more in fifo\n"); -+ atomic_set(&rfbi.cmd_pending, 0); -+ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); -+ break; -+ } -+ -+ /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ -+ -+ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); -+ -+ BUG_ON(len != sizeof(struct update_param)); -+ BUG_ON(p.rfbi_module > 1); -+ -+ display = rfbi.display[p.rfbi_module]; -+ -+ if (p.cmd == RFBI_CMD_UPDATE) { -+ if (do_update(display, &p.par.r)) -+ break; /* async op */ -+ } else if (p.cmd == RFBI_CMD_SYNC) { -+ DSSDBG("Signaling SYNC done!\n"); -+ complete(p.par.sync); -+ } else -+ BUG(); -+ } -+ -+ signal_fifo_waiters(); -+} -+ -+static void rfbi_push_cmd(struct update_param *p) -+{ -+ int ret; -+ -+ while (1) { -+ unsigned long flags; -+ int available; -+ -+ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); -+ available = RFBI_CMD_FIFO_LEN_BYTES - -+ __kfifo_len(rfbi.cmd_fifo); -+ -+/* DSSDBG("%d bytes left in fifo\n", available); */ -+ if (available < sizeof(struct update_param)) { -+ DSSDBG("Going to wait because FIFO FULL..\n"); -+ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); -+ atomic_inc(&rfbi.cmd_fifo_full); -+ wait_for_completion(&rfbi.cmd_done); -+ /*DSSDBG("Woke up because fifo not full anymore\n");*/ -+ continue; -+ } -+ -+ ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, -+ sizeof(struct update_param)); -+/* DSSDBG("pushed %d bytes\n", ret);*/ -+ -+ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); -+ -+ BUG_ON(ret != sizeof(struct update_param)); -+ -+ break; -+ } -+} -+ -+static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h) -+{ -+ struct update_param p; -+ -+ p.rfbi_module = rfbi_module; -+ p.cmd = RFBI_CMD_UPDATE; -+ -+ p.par.r.x = x; -+ p.par.r.y = y; -+ p.par.r.w = w; -+ p.par.r.h = h; -+ -+ DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h); -+ -+ rfbi_push_cmd(&p); -+ -+ process_cmd_fifo(); -+} -+ -+static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp) -+{ -+ struct update_param p; -+ -+ p.rfbi_module = rfbi_module; -+ p.cmd = RFBI_CMD_SYNC; -+ p.par.sync = sync_comp; -+ -+ rfbi_push_cmd(&p); -+ -+ DSSDBG("RFBI sync pushed to cmd fifo\n"); -+ -+ process_cmd_fifo(); -+} -+ -+int rfbi_init(void) -+{ -+ u32 rev; -+ u32 l; -+ -+ spin_lock_init(&rfbi.cmd_lock); -+ rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, -+ &rfbi.cmd_lock); -+ if (IS_ERR(rfbi.cmd_fifo)) -+ return -ENOMEM; -+ -+ init_completion(&rfbi.cmd_done); -+ atomic_set(&rfbi.cmd_fifo_full, 0); -+ atomic_set(&rfbi.cmd_pending, 0); -+ -+ rfbi.base = ioremap(RFBI_BASE, SZ_256); -+ if (!rfbi.base) { -+ DSSERR("can't ioremap RFBI\n"); -+ return -ENOMEM; -+ } -+ -+ rfbi_enable_clocks(1); -+ -+ msleep(10); -+ -+ rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000; -+ -+ /* Enable autoidle and smart-idle */ -+ l = rfbi_read_reg(RFBI_SYSCONFIG); -+ l |= (1 << 0) | (2 << 3); -+ rfbi_write_reg(RFBI_SYSCONFIG, l); -+ -+ rev = rfbi_read_reg(RFBI_REVISION); -+ printk(KERN_INFO "OMAP RFBI rev %d.%d\n", -+ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); -+ -+ rfbi_enable_clocks(0); -+ -+ return 0; -+} -+ -+void rfbi_exit(void) -+{ -+ DSSDBG("rfbi_exit\n"); -+ -+ kfifo_free(rfbi.cmd_fifo); -+ -+ iounmap(rfbi.base); -+} -+ -+/* struct omap_display support */ -+static void rfbi_display_set_mode(struct omap_display *display, -+ int x_res, int y_res, int bpp) -+{ -+ display->bpp = bpp; -+ -+ dispc_set_tft_data_lines(display->bpp); -+ -+ if (rfbi_configure(display->hw_config.u.rfbi.channel, -+ display->bpp, -+ display->hw_config.u.rfbi.data_lines) != 0) { -+ DSSERR("can't configure rfbi\n"); -+ } -+ -+ display->ctrl->set_mode(display, x_res, y_res, bpp); -+} -+ -+ -+static int rfbi_display_update(struct omap_display *display, -+ int x, int y, int w, int h) -+{ -+ int rfbi_module; -+ -+ if (w == 0 || h == 0) -+ return 0; -+ -+ rfbi_module = rfbi_find_display(display); -+ -+ rfbi_push_update(rfbi_module, x, y, w, h); -+ -+ return 0; -+} -+ -+static int rfbi_display_sync(struct omap_display *display) -+{ -+ struct completion sync_comp; -+ int rfbi_module; -+ -+ rfbi_module = rfbi_find_display(display); -+ -+ init_completion(&sync_comp); -+ rfbi_push_sync(rfbi_module, &sync_comp); -+ DSSDBG("Waiting for SYNC to happen...\n"); -+ wait_for_completion(&sync_comp); -+ DSSDBG("Released from SYNC\n"); -+ return 0; -+} -+ -+static int rfbi_display_enable_te(struct omap_display *display, int enable) -+{ -+ display->ctrl->enable_te(display, enable); -+ return 0; -+} -+ -+static int rfbi_display_enable(struct omap_display *display) -+{ -+ int r; -+ -+ BUG_ON(display->panel == NULL || display->ctrl == NULL); -+ -+ r = omap_dispc_register_isr(framedone_callback, NULL, -+ DISPC_IRQ_FRAMEDONE); -+ if (r) { -+ DSSERR("can't get FRAMEDONE irq\n"); -+ return r; -+ } -+ -+ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); -+ -+ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); -+ -+ /* FIX select 16bpp as default */ -+ rfbi_configure(display->hw_config.u.rfbi.channel, -+ 16, -+ display->hw_config.u.rfbi.data_lines); -+ -+ rfbi_set_timings(display->hw_config.u.rfbi.channel, -+ &display->ctrl->timings); -+ -+ display->ctrl->enable(display); -+ -+ return 0; -+} -+ -+static void rfbi_display_disable(struct omap_display *display) -+{ -+ display->ctrl->disable(display); -+ omap_dispc_unregister_isr(framedone_callback); -+} -+ -+void rfbi_init_display(struct omap_display *display) -+{ -+ display->enable = rfbi_display_enable; -+ display->disable = rfbi_display_disable; -+ display->set_mode = rfbi_display_set_mode; -+ display->update = rfbi_display_update; -+ display->sync = rfbi_display_sync; -+ display->enable_te = rfbi_display_enable_te; -+ -+ rfbi.display[display->hw_config.u.rfbi.channel] = display; -+ -+ display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; -+} -diff --git a/arch/arm/plat-omap/dss/sdi.c b/arch/arm/plat-omap/dss/sdi.c -new file mode 100644 -index 0000000..8d5b16d ---- /dev/null -+++ b/arch/arm/plat-omap/dss/sdi.c -@@ -0,0 +1,150 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/sdi.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#define DSS_SUBSYS_NAME "SDI" -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "dss.h" -+ -+ -+static struct { -+ int update_enabled; -+} sdi; -+ -+static int sdi_display_enable(struct omap_display *display) -+{ -+ struct dispc_clock_info cinfo; -+ int lck_div, pck_div; -+ unsigned long fck; -+ -+ struct omap_panel *panel = display->panel; -+ -+ -+ panel->enable(display); -+ -+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); -+ -+ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); -+ dispc_set_lcd_size(display->x_res, display->y_res); -+ -+ /* 15.5.9.1.2 */ -+ panel->config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; -+ -+ dispc_set_lcd_timings(&panel->timings); -+ dispc_set_pol_freq(panel); -+ -+ dispc_calc_clock_div(1, panel->timings.pixel_clock * 1000, -+ &cinfo); -+ -+ if (dispc_set_clock_div(&cinfo)) { -+ DSSERR("Failed to set DSS clocks\n"); -+ return -EINVAL; -+ } -+ -+ fck = cinfo.fck; -+ lck_div = cinfo.lck_div; -+ pck_div = cinfo.pck_div; -+ -+ panel->timings.pixel_clock = fck / lck_div / pck_div / 1000; -+ -+ DSSDBG("fck %lu, lck_div %d, pck_div %d\n", fck, lck_div, pck_div); -+ DSSDBG("pixel clock changed to %d\n", panel->timings.pixel_clock); -+ -+ -+ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); -+ dispc_set_tft_data_lines(24); -+ dispc_lcd_enable_signal_polarity(1); -+ dispc_pck_free_enable(1); -+ -+ dss_sdi_init(display->hw_config.u.sdi.datapairs); -+ -+ mdelay(2); -+ -+ dispc_enable_lcd_out(1); -+ -+ return 0; -+} -+ -+static void sdi_display_disable(struct omap_display *display) -+{ -+ display->panel->disable(display); -+ dispc_enable_lcd_out(0); -+ -+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); -+} -+ -+static void sdi_display_set_mode(struct omap_display *display, -+ int x_res, int y_res, int bpp) -+{ -+ if (display->ctrl && display->ctrl->set_mode) -+ display->ctrl->set_mode(display, x_res, y_res, bpp); -+ if (display->panel && display->panel->set_mode) -+ display->panel->set_mode(display, x_res, y_res, bpp); -+} -+ -+static int sdi_display_set_update_mode(struct omap_display *display, -+ enum omap_dss_update_mode mode) -+{ -+ if (mode == OMAP_DSS_UPDATE_MANUAL) -+ return -EINVAL; -+ -+ if (mode == OMAP_DSS_UPDATE_DISABLED) { -+ dispc_enable_lcd_out(0); -+ sdi.update_enabled = 0; -+ } else { -+ dispc_enable_lcd_out(1); -+ sdi.update_enabled = 1; -+ } -+ -+ return 0; -+} -+ -+static enum omap_dss_update_mode sdi_display_get_update_mode( -+ struct omap_display *display) -+{ -+ return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO : -+ OMAP_DSS_UPDATE_DISABLED; -+} -+ -+ -+void sdi_init_display(struct omap_display *display) -+{ -+ DSSDBG("SDI init\n"); -+ -+ display->enable = sdi_display_enable; -+ display->disable = sdi_display_disable; -+ display->set_mode = sdi_display_set_mode; -+ display->set_update_mode = sdi_display_set_update_mode; -+ display->get_update_mode = sdi_display_get_update_mode; -+} -+ -+int sdi_init(void) -+{ -+ return 0; -+} -+ -+void sdi_exit(void) -+{ -+} -diff --git a/arch/arm/plat-omap/dss/venc.c b/arch/arm/plat-omap/dss/venc.c -new file mode 100644 -index 0000000..7afb2c5 ---- /dev/null -+++ b/arch/arm/plat-omap/dss/venc.c -@@ -0,0 +1,501 @@ -+/* -+ * linux/arch/arm/plat-omap/dss/venc.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * VENC settings from TI's DSS driver -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#define DSS_SUBSYS_NAME "VENC" -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "dss.h" -+ -+#define VENC_BASE 0x48050C00 -+ -+/* Venc registers */ -+#define VENC_REV_ID 0x00 -+#define VENC_STATUS 0x04 -+#define VENC_F_CONTROL 0x08 -+#define VENC_VIDOUT_CTRL 0x10 -+#define VENC_SYNC_CTRL 0x14 -+#define VENC_LLEN 0x1C -+#define VENC_FLENS 0x20 -+#define VENC_HFLTR_CTRL 0x24 -+#define VENC_CC_CARR_WSS_CARR 0x28 -+#define VENC_C_PHASE 0x2C -+#define VENC_GAIN_U 0x30 -+#define VENC_GAIN_V 0x34 -+#define VENC_GAIN_Y 0x38 -+#define VENC_BLACK_LEVEL 0x3C -+#define VENC_BLANK_LEVEL 0x40 -+#define VENC_X_COLOR 0x44 -+#define VENC_M_CONTROL 0x48 -+#define VENC_BSTAMP_WSS_DATA 0x4C -+#define VENC_S_CARR 0x50 -+#define VENC_LINE21 0x54 -+#define VENC_LN_SEL 0x58 -+#define VENC_L21__WC_CTL 0x5C -+#define VENC_HTRIGGER_VTRIGGER 0x60 -+#define VENC_SAVID__EAVID 0x64 -+#define VENC_FLEN__FAL 0x68 -+#define VENC_LAL__PHASE_RESET 0x6C -+#define VENC_HS_INT_START_STOP_X 0x70 -+#define VENC_HS_EXT_START_STOP_X 0x74 -+#define VENC_VS_INT_START_X 0x78 -+#define VENC_VS_INT_STOP_X__VS_INT_START_Y 0x7C -+#define VENC_VS_INT_STOP_Y__VS_EXT_START_X 0x80 -+#define VENC_VS_EXT_STOP_X__VS_EXT_START_Y 0x84 -+#define VENC_VS_EXT_STOP_Y 0x88 -+#define VENC_AVID_START_STOP_X 0x90 -+#define VENC_AVID_START_STOP_Y 0x94 -+#define VENC_FID_INT_START_X__FID_INT_START_Y 0xA0 -+#define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X 0xA4 -+#define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y 0xA8 -+#define VENC_TVDETGP_INT_START_STOP_X 0xB0 -+#define VENC_TVDETGP_INT_START_STOP_Y 0xB4 -+#define VENC_GEN_CTRL 0xB8 -+#define VENC_OUTPUT_CONTROL 0xC4 -+#define VENC_DAC_B__DAC_C 0xC8 -+ -+struct venc_config { -+ u32 f_control; -+ u32 vidout_ctrl; -+ u32 sync_ctrl; -+ u32 llen; -+ u32 flens; -+ u32 hfltr_ctrl; -+ u32 cc_carr_wss_carr; -+ u32 c_phase; -+ u32 gain_u; -+ u32 gain_v; -+ u32 gain_y; -+ u32 black_level; -+ u32 blank_level; -+ u32 x_color; -+ u32 m_control; -+ u32 bstamp_wss_data; -+ u32 s_carr; -+ u32 line21; -+ u32 ln_sel; -+ u32 l21__wc_ctl; -+ u32 htrigger_vtrigger; -+ u32 savid__eavid; -+ u32 flen__fal; -+ u32 lal__phase_reset; -+ u32 hs_int_start_stop_x; -+ u32 hs_ext_start_stop_x; -+ u32 vs_int_start_x; -+ u32 vs_int_stop_x__vs_int_start_y; -+ u32 vs_int_stop_y__vs_ext_start_x; -+ u32 vs_ext_stop_x__vs_ext_start_y; -+ u32 vs_ext_stop_y; -+ u32 avid_start_stop_x; -+ u32 avid_start_stop_y; -+ u32 fid_int_start_x__fid_int_start_y; -+ u32 fid_int_offset_y__fid_ext_start_x; -+ u32 fid_ext_start_y__fid_ext_offset_y; -+ u32 tvdetgp_int_start_stop_x; -+ u32 tvdetgp_int_start_stop_y; -+ u32 gen_ctrl; -+ -+ int width; -+ int height; -+}; -+ -+/* from TRM */ -+static const struct venc_config venc_config_pal_trm = { -+ .f_control = 0, -+ .vidout_ctrl = 1, -+ .sync_ctrl = 0x40, -+ .llen = 0x35F, /* 863 */ -+ .flens = 0x270, /* 624 */ -+ .hfltr_ctrl = 0, -+ .cc_carr_wss_carr = 0x2F7225ED, -+ .c_phase = 0, -+ .gain_u = 0x111, -+ .gain_v = 0x181, -+ .gain_y = 0x140, -+ .black_level = 0x3B, -+ .blank_level = 0x3B, -+ .x_color = 0x7, -+ .m_control = 0x2, -+ .bstamp_wss_data = 0x3F, -+ .s_carr = 0x2A098ACB, -+ .line21 = 0, -+ .ln_sel = 0x01290015, -+ .l21__wc_ctl = 0x0000F603, -+ .htrigger_vtrigger = 0, -+ -+ .savid__eavid = 0x06A70108, -+ .flen__fal = 0x00180270, -+ .lal__phase_reset = 0x00180270, -+ .hs_int_start_stop_x = 0x00880358, -+ .hs_ext_start_stop_x = 0x000F035F, -+ .vs_int_start_x = 0x01A70000, -+ .vs_int_stop_x__vs_int_start_y = 0x000001A7, -+ .vs_int_stop_y__vs_ext_start_x = 0x01AF0000, -+ .vs_ext_stop_x__vs_ext_start_y = 0x000101AF, -+ .vs_ext_stop_y = 0x00000025, -+ .avid_start_stop_x = 0x03530083, -+ .avid_start_stop_y = 0x026C002E, -+ .fid_int_start_x__fid_int_start_y = 0x0001008A, -+ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, -+ .fid_ext_start_y__fid_ext_offset_y = 0x01380001, -+ -+ .tvdetgp_int_start_stop_x = 0x00140001, -+ .tvdetgp_int_start_stop_y = 0x00010001, -+ .gen_ctrl = 0x00FF0000, -+ -+ .width = 720, -+ .height = 574, /* for some reason, this isn't 576 */ -+}; -+ -+/* from TRM */ -+static const struct venc_config venc_config_ntsc_trm = { -+ .f_control = 0, -+ .vidout_ctrl = 1, -+ .sync_ctrl = 0x8040, -+ .llen = 0x359, -+ .flens = 0x20C, -+ .hfltr_ctrl = 0, -+ .cc_carr_wss_carr = 0x043F2631, -+ .c_phase = 0, -+ .gain_u = 0x102, -+ .gain_v = 0x16C, -+ .gain_y = 0x12F, -+ .black_level = 0x43, -+ .blank_level = 0x38, -+ .x_color = 0x7, -+ .m_control = 0x1, -+ .bstamp_wss_data = 0x38, -+ .s_carr = 0x21F07C1F, -+ .line21 = 0, -+ .ln_sel = 0x01310011, -+ .l21__wc_ctl = 0x0000F003, -+ .htrigger_vtrigger = 0, -+ -+ .savid__eavid = 0x069300F4, -+ .flen__fal = 0x0016020C, -+ .lal__phase_reset = 0x00060107, -+ .hs_int_start_stop_x = 0x008E0350, -+ .hs_ext_start_stop_x = 0x000F0359, -+ .vs_int_start_x = 0x01A00000, -+ .vs_int_stop_x__vs_int_start_y = 0x020701A0, -+ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, -+ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, -+ .vs_ext_stop_y = 0x00000006, -+ .avid_start_stop_x = 0x03480078, -+ .avid_start_stop_y = 0x02060024, -+ .fid_int_start_x__fid_int_start_y = 0x0001008A, -+ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, -+ .fid_ext_start_y__fid_ext_offset_y = 0x01060006, -+ -+ .tvdetgp_int_start_stop_x = 0x00140001, -+ .tvdetgp_int_start_stop_y = 0x00010001, -+ .gen_ctrl = 0x00F90000, -+ -+ .width = 720, -+ .height = 482, -+}; -+ -+static const struct venc_config venc_config_pal_bdghi = { -+ .f_control = 0, -+ .vidout_ctrl = 0, -+ .sync_ctrl = 0, -+ .hfltr_ctrl = 0, -+ .x_color = 0, -+ .line21 = 0, -+ .ln_sel = 21, -+ .htrigger_vtrigger = 0, -+ .tvdetgp_int_start_stop_x = 0x00140001, -+ .tvdetgp_int_start_stop_y = 0x00010001, -+ .gen_ctrl = 0x00FB0000, -+ -+ .llen = 864-1, -+ .flens = 625-1, -+ .cc_carr_wss_carr = 0x2F7625ED, -+ .c_phase = 0xDF, -+ .gain_u = 0x111, -+ .gain_v = 0x181, -+ .gain_y = 0x140, -+ .black_level = 0x3e, -+ .blank_level = 0x3e, -+ .m_control = 0<<2 | 1<<1, -+ .bstamp_wss_data = 0x42, -+ .s_carr = 0x2a098acb, -+ .l21__wc_ctl = 0<<13 | 0x16<<8 | 0<<0, -+ .savid__eavid = 0x06A70108, -+ .flen__fal = 23<<16 | 624<<0, -+ .lal__phase_reset = 2<<17 | 310<<0, -+ .hs_int_start_stop_x = 0x00920358, -+ .hs_ext_start_stop_x = 0x000F035F, -+ .vs_int_start_x = 0x1a7<<16, -+ .vs_int_stop_x__vs_int_start_y = 0x000601A7, -+ .vs_int_stop_y__vs_ext_start_x = 0x01AF0036, -+ .vs_ext_stop_x__vs_ext_start_y = 0x27101af, -+ .vs_ext_stop_y = 0x05, -+ .avid_start_stop_x = 0x03530082, -+ .avid_start_stop_y = 0x0270002E, -+ .fid_int_start_x__fid_int_start_y = 0x0005008A, -+ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, -+ .fid_ext_start_y__fid_ext_offset_y = 0x01380005, -+ -+ .width = 720, -+ .height = 576, -+}; -+ -+static struct { -+ void __iomem *base; -+ const struct venc_config *config; -+ struct mutex venc_lock; -+} venc; -+ -+static struct omap_panel venc_panel = { -+ .name = "tv-out", -+ .x_res = 0, -+ .y_res = 0, -+ .bpp = 24, -+}; -+ -+static inline void venc_write_reg(int idx, u32 val) -+{ -+ __raw_writel(val, venc.base + idx); -+} -+ -+static inline u32 venc_read_reg(int idx) -+{ -+ u32 l = __raw_readl(venc.base + idx); -+ return l; -+} -+ -+static void venc_write_config(const struct venc_config *config) -+{ -+ DSSDBG("write venc conf\n"); -+ -+ venc_write_reg(VENC_LLEN, config->llen); -+ venc_write_reg(VENC_FLENS, config->flens); -+ venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr); -+ venc_write_reg(VENC_C_PHASE, config->c_phase); -+ venc_write_reg(VENC_GAIN_U, config->gain_u); -+ venc_write_reg(VENC_GAIN_V, config->gain_v); -+ venc_write_reg(VENC_GAIN_Y, config->gain_y); -+ venc_write_reg(VENC_BLACK_LEVEL, config->black_level); -+ venc_write_reg(VENC_BLANK_LEVEL, config->blank_level); -+ venc_write_reg(VENC_M_CONTROL, config->m_control); -+ venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data); -+ venc_write_reg(VENC_S_CARR, config->s_carr); -+ venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl); -+ venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid); -+ venc_write_reg(VENC_FLEN__FAL, config->flen__fal); -+ venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset); -+ venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x); -+ venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x); -+ venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x); -+ venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y, -+ config->vs_int_stop_x__vs_int_start_y); -+ venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X, -+ config->vs_int_stop_y__vs_ext_start_x); -+ venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y, -+ config->vs_ext_stop_x__vs_ext_start_y); -+ venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y); -+ venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x); -+ venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y); -+ venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y, -+ config->fid_int_start_x__fid_int_start_y); -+ venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X, -+ config->fid_int_offset_y__fid_ext_start_x); -+ venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y, -+ config->fid_ext_start_y__fid_ext_offset_y); -+ -+ venc_write_reg(VENC_DAC_B__DAC_C, venc_read_reg(VENC_DAC_B__DAC_C)); -+ venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl); -+ venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl); -+ venc_write_reg(VENC_X_COLOR, config->x_color); -+ venc_write_reg(VENC_LINE21, config->line21); -+ venc_write_reg(VENC_LN_SEL, config->ln_sel); -+ venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger); -+ venc_write_reg(VENC_TVDETGP_INT_START_STOP_X, -+ config->tvdetgp_int_start_stop_x); -+ venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y, -+ config->tvdetgp_int_start_stop_y); -+ venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl); -+ venc_write_reg(VENC_F_CONTROL, config->f_control); -+ venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl); -+} -+ -+static void venc_reset(void) -+{ -+ int t = 1000; -+ -+ venc_write_reg(VENC_F_CONTROL, venc_read_reg(VENC_F_CONTROL) | (1<<8)); -+ while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) { -+ if (--t == 0) { -+ DSSERR("Failed to reset venc\n"); -+ return; -+ } -+ } -+} -+ -+static void venc_enable_clocks(int enable) -+{ -+ if (enable) -+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | -+ DSS_CLK_96M); -+ else -+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | -+ DSS_CLK_96M); -+} -+ -+int venc_init(void) -+{ -+ u8 rev_id; -+ int use_pal = 1; /* XXX */ -+ -+ mutex_init(&venc.venc_lock); -+ -+ if (use_pal) -+ venc.config = &venc_config_pal_trm; -+ else -+ venc.config = &venc_config_ntsc_trm; -+ -+ venc_panel.x_res = venc.config->width; -+ venc_panel.y_res = venc.config->height; -+ -+ venc.base = ioremap(VENC_BASE, SZ_1K); -+ if (!venc.base) { -+ DSSERR("can't ioremap VENC\n"); -+ return -ENOMEM; -+ } -+ -+ /* enable clocks */ -+ venc_enable_clocks(1); -+ -+ /* configure venc */ -+ venc_reset(); -+ venc_write_config(venc.config); -+ -+ rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff); -+ printk(KERN_INFO "OMAP VENC rev %d\n", rev_id); -+ -+ venc_enable_clocks(0); -+ -+ return 0; -+} -+ -+void venc_exit(void) -+{ -+ iounmap(venc.base); -+} -+ -+static void venc_sync_lost_handler(void *arg, u32 mask) -+{ -+ /* we just catch SYNC_LOST_DIGIT here so that -+ * dispc doesn't take it as an error */ -+} -+ -+static int venc_enable_display(struct omap_display *display) -+{ -+ DSSDBG("venc_enable_display\n"); -+ -+ mutex_lock(&venc.venc_lock); -+ -+ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { -+ mutex_unlock(&venc.venc_lock); -+ return -EINVAL; -+ } -+ -+ venc_enable_clocks(1); -+ -+ dss_set_venc_output(display->hw_config.u.venc.type); -+ dss_set_dac_pwrdn_bgz(1); -+ -+ if (display->hw_config.u.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE) { -+ if (cpu_is_omap24xx()) -+ venc_write_reg(VENC_OUTPUT_CONTROL, 0x2); -+ else -+ venc_write_reg(VENC_OUTPUT_CONTROL, 0xa); -+ } else { /* S-Video */ -+ venc_write_reg(VENC_OUTPUT_CONTROL, 0xd); -+ } -+ -+ venc_write_config(venc.config); -+ -+ dispc_set_digit_size(venc.config->width, venc.config->height/2); -+ -+ if (display->hw_config.panel_enable) -+ display->hw_config.panel_enable(display); -+ -+ dispc_go(OMAP_DSS_CHANNEL_DIGIT); -+ -+ omap_dispc_register_isr(venc_sync_lost_handler, 0, -+ DISPC_IRQ_SYNC_LOST_DIGIT); -+ -+ dispc_enable_digit_out(1); -+ -+ mdelay(20); -+ -+ omap_dispc_unregister_isr(venc_sync_lost_handler); -+ -+ display->state = OMAP_DSS_DISPLAY_ACTIVE; -+ -+ mutex_unlock(&venc.venc_lock); -+ -+ return 0; -+} -+ -+static void venc_disable_display(struct omap_display *display) -+{ -+ DSSDBG("venc_disable_display\n"); -+ -+ mutex_lock(&venc.venc_lock); -+ -+ if (display->state == OMAP_DSS_DISPLAY_DISABLED) { -+ mutex_unlock(&venc.venc_lock); -+ return; -+ } -+ -+ venc_write_reg(VENC_OUTPUT_CONTROL, 0); -+ dss_set_dac_pwrdn_bgz(0); -+ -+ dispc_enable_digit_out(0); -+ -+ if (display->hw_config.panel_disable) -+ display->hw_config.panel_disable(display); -+ -+ venc_enable_clocks(0); -+ -+ display->state = OMAP_DSS_DISPLAY_DISABLED; -+ -+ mutex_unlock(&venc.venc_lock); -+} -+ -+void venc_init_display(struct omap_display *display) -+{ -+ display->panel = &venc_panel; -+ display->enable = venc_enable_display; -+ display->disable = venc_disable_display; -+} -diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h -new file mode 100644 -index 0000000..95f5b3a ---- /dev/null -+++ b/arch/arm/plat-omap/include/mach/display.h -@@ -0,0 +1,463 @@ -+/* -+ * linux/include/asm-arm/arch-omap/display.h -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#ifndef __ASM_ARCH_OMAP_DISPLAY_H -+#define __ASM_ARCH_OMAP_DISPLAY_H -+ -+#include -+ -+#define DISPC_IRQ_FRAMEDONE (1 << 0) -+#define DISPC_IRQ_VSYNC (1 << 1) -+#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) -+#define DISPC_IRQ_EVSYNC_ODD (1 << 3) -+#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) -+#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) -+#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) -+#define DISPC_IRQ_GFX_END_WIN (1 << 7) -+#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) -+#define DISPC_IRQ_OCP_ERR (1 << 9) -+#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) -+#define DISPC_IRQ_VID1_END_WIN (1 << 11) -+#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) -+#define DISPC_IRQ_VID2_END_WIN (1 << 13) -+#define DISPC_IRQ_SYNC_LOST (1 << 14) -+#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) -+ -+enum omap_display_type { -+ OMAP_DISPLAY_TYPE_NONE = 0, -+ OMAP_DISPLAY_TYPE_DPI = 1 << 0, -+ OMAP_DISPLAY_TYPE_DBI = 1 << 1, -+ OMAP_DISPLAY_TYPE_SDI = 1 << 2, -+ OMAP_DISPLAY_TYPE_DSI = 1 << 3, -+ OMAP_DISPLAY_TYPE_VENC = 1 << 4, -+}; -+ -+enum omap_plane { -+ OMAP_DSS_GFX = 0, -+ OMAP_DSS_VIDEO1 = 1, -+ OMAP_DSS_VIDEO2 = 2 -+}; -+ -+enum omap_channel { -+ OMAP_DSS_CHANNEL_LCD = 0, -+ OMAP_DSS_CHANNEL_DIGIT = 1, -+}; -+ -+enum omap_color_mode { -+ OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ -+ OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ -+ OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ -+ OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ -+ OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ -+ OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ -+ OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ -+ OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ -+ OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ -+ OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ -+ OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ -+ OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ -+ OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ -+ OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ -+ -+ OMAP_DSS_COLOR_GFX_OMAP3 = -+ OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | -+ OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | -+ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | -+ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | -+ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | -+ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, -+ -+ OMAP_DSS_COLOR_VID_OMAP3 = -+ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | -+ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | -+ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | -+ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 | -+ OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, -+}; -+ -+enum omap_lcd_display_type { -+ OMAP_DSS_LCD_DISPLAY_STN, -+ OMAP_DSS_LCD_DISPLAY_TFT, -+}; -+ -+enum omap_dss_load_mode { -+ OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, -+ OMAP_DSS_LOAD_CLUT_ONLY = 1, -+ OMAP_DSS_LOAD_FRAME_ONLY = 2, -+ OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, -+}; -+ -+enum omap_dss_color_key_type { -+ OMAP_DSS_COLOR_KEY_GFX_DST = 0, -+ OMAP_DSS_COLOR_KEY_VID_SRC = 1, -+}; -+ -+enum omap_rfbi_te_mode { -+ OMAP_DSS_RFBI_TE_MODE_1 = 1, -+ OMAP_DSS_RFBI_TE_MODE_2 = 2, -+}; -+ -+enum omap_panel_config { -+ OMAP_DSS_LCD_IVS = 1<<0, -+ OMAP_DSS_LCD_IHS = 1<<1, -+ OMAP_DSS_LCD_IPC = 1<<2, -+ OMAP_DSS_LCD_IEO = 1<<3, -+ OMAP_DSS_LCD_RF = 1<<4, -+ OMAP_DSS_LCD_ONOFF = 1<<5, -+ -+ OMAP_DSS_LCD_TFT = 1<<20, -+}; -+ -+enum omap_dss_venc_type { -+ OMAP_DSS_VENC_TYPE_COMPOSITE, -+ OMAP_DSS_VENC_TYPE_SVIDEO, -+}; -+ -+struct omap_display; -+struct omap_panel; -+struct omap_ctrl; -+ -+/* RFBI */ -+ -+struct rfbi_timings { -+ int cs_on_time; -+ int cs_off_time; -+ int we_on_time; -+ int we_off_time; -+ int re_on_time; -+ int re_off_time; -+ int we_cycle_time; -+ int re_cycle_time; -+ int cs_pulse_width; -+ int access_time; -+ -+ int clk_div; -+ -+ u32 tim[5]; /* set by rfbi_convert_timings() */ -+ -+ int converted; -+}; -+ -+void omap_rfbi_write_command(const void *buf, u32 len); -+void omap_rfbi_read_data(void *buf, u32 len); -+void omap_rfbi_write_data(const void *buf, u32 len); -+void omap_rfbi_write_pixels(const void *buf, int scr_width, int x, int y, -+ int w, int h); -+int omap_rfbi_enable_te(int enable, unsigned line); -+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, -+ unsigned hs_pulse_time, unsigned vs_pulse_time, -+ int hs_pol_inv, int vs_pol_inv, int extif_div); -+ -+/* DSI */ -+int dsi_vc_dcs_write(int channel, u8 *data, int len); -+int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); -+int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); -+int dsi_vc_set_max_rx_packet_size(int channel, u16 len); -+int dsi_vc_send_null(int channel); -+ -+/* Board specific data */ -+struct omap_display_data { -+ enum omap_display_type type; -+ -+ union { -+ struct { -+ int data_lines; -+ } dpi; -+ -+ struct { -+ int channel; -+ int data_lines; -+ } rfbi; -+ -+ struct { -+ int datapairs; -+ } sdi; -+ -+ struct { -+ int clk_lane; -+ int clk_pol; -+ int data1_lane; -+ int data1_pol; -+ int data2_lane; -+ int data2_pol; -+ } dsi; -+ -+ struct { -+ enum omap_dss_venc_type type; -+ } venc; -+ } u; -+ -+ int panel_reset_gpio; -+ int ctrl_reset_gpio; -+ -+ const char *name; /* for debug */ -+ const char *ctrl_name; -+ const char *panel_name; -+ -+ void *priv; -+ -+ /* platform specific enable/disable */ -+ int (*panel_enable)(struct omap_display *display); -+ void (*panel_disable)(struct omap_display *display); -+ int (*ctrl_enable)(struct omap_display *display); -+ void (*ctrl_disable)(struct omap_display *display); -+ int (*set_backlight)(struct omap_display *display, -+ int level); -+}; -+ -+/* Board specific data */ -+struct omap_dss_platform_data { -+ int num_displays; -+ struct omap_display_data *displays[]; -+}; -+ -+struct omap_ctrl { -+ struct module *owner; -+ -+ const char *name; -+ -+ int (*init)(struct omap_display *display); -+ void (*cleanup)(struct omap_display *display); -+ int (*enable)(struct omap_display *display); -+ void (*disable)(struct omap_display *display); -+ int (*suspend)(struct omap_display *display); -+ int (*resume)(struct omap_display *display); -+ void (*setup_update)(struct omap_display *display, -+ int x, int y, int w, int h); -+ void (*set_mode)(struct omap_display *display, -+ int x_res, int y_res, int bpp); -+ -+ int (*enable_te)(struct omap_display *display, int enable); -+ -+ int (*rotate)(struct omap_display *display, int rotate); -+ int (*mirror)(struct omap_display *display, int enable); -+ -+ int (*run_test)(struct omap_display *display, int test); -+ -+ int bpp; -+ -+ struct rfbi_timings timings; -+ -+ void *priv; -+}; -+ -+struct omap_video_timings { -+ /* Unit: KHz */ -+ u32 pixel_clock; -+ /* Unit: pixel clocks */ -+ u16 hsw; /* Horizontal synchronization pulse width */ -+ /* Unit: pixel clocks */ -+ u16 hfp; /* Horizontal front porch */ -+ /* Unit: pixel clocks */ -+ u16 hbp; /* Horizontal back porch */ -+ /* Unit: line clocks */ -+ u16 vsw; /* Vertical synchronization pulse width */ -+ /* Unit: line clocks */ -+ u16 vfp; /* Vertical front porch */ -+ /* Unit: line clocks */ -+ u16 vbp; /* Vertical back porch */ -+}; -+ -+struct omap_panel { -+ struct module *owner; -+ -+ const char *name; -+ -+ int (*init)(struct omap_display *display); -+ void (*cleanup)(struct omap_display *display); -+ int (*remove)(struct omap_display *display); -+ int (*enable)(struct omap_display *display); -+ void (*disable)(struct omap_display *display); -+ int (*suspend)(struct omap_display *display); -+ int (*resume)(struct omap_display *display); -+ void (*set_mode)(struct omap_display *display, -+ int x_res, int y_res, int bpp); -+ int (*run_test)(struct omap_display *display, int test); -+ -+ struct omap_video_timings timings; -+ -+ int acbi; /* ac-bias pin transitions per interrupt */ -+ /* Unit: line clocks */ -+ int acb; /* ac-bias pin frequency */ -+ -+ enum omap_panel_config config; -+ -+ int x_res, y_res; -+ int bpp; -+ -+ void *priv; -+}; -+ -+/* XXX perhaps this should be removed */ -+enum omap_dss_overlay_managers { -+ OMAP_DSS_OVL_MGR_LCD, -+ OMAP_DSS_OVL_MGR_TV, -+}; -+ -+struct omap_overlay_manager; -+ -+struct omap_overlay_info { -+ int enabled; -+ u32 paddr; -+ void *vaddr; -+ int screen_width; -+ int pos_x; -+ int pos_y; -+ int width; -+ int height; -+ int out_width; /* if 0, out_width == width */ -+ int out_height; /* if 0, out_height == height */ -+ enum omap_color_mode color_mode; -+}; -+ -+enum omap_overlay_caps { -+ OMAP_DSS_OVL_CAP_SCALE = 1 << 0, -+}; -+ -+struct omap_overlay { -+ -+ const char *name; -+ int id; -+ struct omap_overlay_manager *manager; -+ enum omap_color_mode supported_modes; -+ struct omap_overlay_info info; -+ enum omap_overlay_caps caps; -+ -+ int (*set_manager)(struct omap_overlay *ovl, -+ struct omap_overlay_manager *mgr); -+ int (*unset_manager)(struct omap_overlay *ovl); -+ -+ int (*setup_input)(struct omap_overlay *ovl, -+ u32 paddr, void *vaddr, -+ int screen_width, -+ int width, int height, -+ enum omap_color_mode color_mode); -+ int (*setup_output)(struct omap_overlay *ovl, -+ int pos_x, int pos_y, -+ int out_width, int out_height); -+ int (*enable)(struct omap_overlay *ovl, int enable); -+}; -+ -+enum omap_overlay_manager_caps { -+ OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, -+}; -+ -+struct omap_overlay_manager { -+ -+ const char *name; -+ int id; -+ enum omap_overlay_manager_caps caps; -+ struct omap_display *display; -+ int num_overlays; -+ struct omap_overlay *overlays; -+ enum omap_display_type supported_displays; -+ -+ int (*set_display)(struct omap_overlay_manager *mgr, -+ struct omap_display *display); -+ int (*unset_display)(struct omap_overlay_manager *mgr); -+ -+ int (*apply)(struct omap_overlay_manager *mgr); -+}; -+ -+enum omap_display_caps { -+ OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, -+}; -+ -+enum omap_dss_update_mode { -+ OMAP_DSS_UPDATE_DISABLED = 0, -+ OMAP_DSS_UPDATE_AUTO, -+ OMAP_DSS_UPDATE_MANUAL, -+}; -+ -+enum omap_dss_display_state { -+ OMAP_DSS_DISPLAY_DISABLED = 0, -+ OMAP_DSS_DISPLAY_ACTIVE, -+ OMAP_DSS_DISPLAY_SUSPENDED, -+}; -+ -+struct omap_display { -+ /*atomic_t ref_count;*/ -+ int ref_count; -+ -+ enum omap_display_type type; -+ const char *name; -+ -+ enum omap_display_caps caps; -+ -+ struct omap_overlay_manager *manager; -+ -+ int x_res, y_res; -+ int bpp; -+ -+ enum omap_dss_display_state state; -+ -+ struct omap_display_data hw_config; /* board specific data */ -+ struct omap_ctrl *ctrl; /* static common data */ -+ struct omap_panel *panel; /* static common data */ -+ -+ int (*enable)(struct omap_display *display); -+ void (*disable)(struct omap_display *display); -+ -+ int (*suspend)(struct omap_display *display); -+ int (*resume)(struct omap_display *display); -+ -+ void (*set_mode)(struct omap_display *display, -+ int x_res, int y_res, int bpp); -+ int (*check_timings)(struct omap_display *display, -+ struct omap_video_timings *timings); -+ void (*set_timings)(struct omap_display *display, -+ struct omap_video_timings *timings); -+ void (*get_timings)(struct omap_display *display, -+ struct omap_video_timings *timings); -+ int (*update)(struct omap_display *display, -+ int x, int y, int w, int h); -+ int (*sync)(struct omap_display *display); -+ -+ int (*set_update_mode)(struct omap_display *display, -+ enum omap_dss_update_mode); -+ enum omap_dss_update_mode (*get_update_mode) -+ (struct omap_display *display); -+ -+ int (*enable_te)(struct omap_display *display, int enable); -+ int (*get_te)(struct omap_display *display); -+ -+ int (*run_test)(struct omap_display *display, int test); -+}; -+ -+int omap_dss_get_num_displays(void); -+struct omap_display *omap_dss_get_display(int no); -+void omap_dss_put_display(struct omap_display *display); -+ -+void omap_dss_register_ctrl(struct omap_ctrl *ctrl); -+void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl); -+ -+void omap_dss_register_panel(struct omap_panel *panel); -+void omap_dss_unregister_panel(struct omap_panel *panel); -+ -+int omap_dss_get_num_overlay_managers(void); -+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); -+ -+int omap_dss_get_num_overlays(void); -+struct omap_overlay *omap_dss_get_overlay(int num); -+ -+typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); -+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); -+int omap_dispc_unregister_isr(omap_dispc_isr_t isr); -+ -+#endif --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0004-DSS-support-for-Beagle-Board.patch b/packages/linux/linux-omap/0004-DSS-support-for-Beagle-Board.patch new file mode 100644 index 0000000000..e9fe999baf --- /dev/null +++ b/packages/linux/linux-omap/0004-DSS-support-for-Beagle-Board.patch @@ -0,0 +1,1605 @@ +From 76e1700add1c77b614ed11c3e29e8a39bd4e6b8c Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Mon, 29 Sep 2008 17:03:36 +0300 +Subject: [PATCH] DSS: support for Beagle Board + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/configs/dss_omap3_beagle_defconfig | 1437 +++++++++++++++++++++++++++ + arch/arm/mach-omap2/board-omap3beagle.c | 101 ++- + 2 files changed, 1524 insertions(+), 14 deletions(-) + create mode 100644 arch/arm/configs/dss_omap3_beagle_defconfig + +diff --git a/arch/arm/configs/dss_omap3_beagle_defconfig b/arch/arm/configs/dss_omap3_beagle_defconfig +new file mode 100644 +index 0000000..f39167f +--- /dev/null ++++ b/arch/arm/configs/dss_omap3_beagle_defconfig +@@ -0,0 +1,1437 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-omap1 ++# Wed Jan 7 15:22:00 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y ++CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=14 ++# CONFIG_CGROUPS is not set ++CONFIG_GROUP_SCHED=y ++CONFIG_FAIR_GROUP_SCHED=y ++# CONFIG_RT_GROUP_SCHED is not set ++CONFIG_USER_SCHED=y ++# CONFIG_CGROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++# CONFIG_NAMESPACES is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++CONFIG_CLASSIC_RCU=y ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++CONFIG_ARCH_OMAP=y ++# CONFIG_ARCH_MSM is not set ++ ++# ++# TI OMAP Implementations ++# ++CONFIG_ARCH_OMAP_OTG=y ++# CONFIG_ARCH_OMAP1 is not set ++# CONFIG_ARCH_OMAP2 is not set ++CONFIG_ARCH_OMAP3=y ++ ++# ++# OMAP Feature Selections ++# ++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set ++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set ++# CONFIG_OMAP_SMARTREFLEX is not set ++# CONFIG_OMAP_RESET_CLOCKS is not set ++CONFIG_OMAP_BOOT_TAG=y ++CONFIG_OMAP_BOOT_REASON=y ++# CONFIG_OMAP_COMPONENT_VERSION is not set ++# CONFIG_OMAP_GPIO_SWITCH is not set ++# CONFIG_OMAP_MUX is not set ++# CONFIG_OMAP_MCBSP is not set ++# CONFIG_OMAP_MMU_FWK is not set ++# CONFIG_OMAP_MBOX_FWK is not set ++# CONFIG_OMAP_MPU_TIMER is not set ++CONFIG_OMAP_32K_TIMER=y ++CONFIG_OMAP_32K_TIMER_HZ=128 ++CONFIG_OMAP_DM_TIMER=y ++# CONFIG_OMAP_LL_DEBUG_UART1 is not set ++# CONFIG_OMAP_LL_DEBUG_UART2 is not set ++CONFIG_OMAP_LL_DEBUG_UART3=y ++CONFIG_OMAP2_DSS=m ++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y ++# CONFIG_OMAP2_DSS_RFBI is not set ++CONFIG_OMAP2_DSS_VENC=y ++# CONFIG_OMAP2_DSS_SDI is not set ++# CONFIG_OMAP2_DSS_DSI is not set ++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set ++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 ++CONFIG_ARCH_OMAP34XX=y ++CONFIG_ARCH_OMAP3430=y ++ ++# ++# OMAP Board Type ++# ++# CONFIG_MACH_OMAP_LDP is not set ++# CONFIG_MACH_OMAP_3430SDP is not set ++# CONFIG_MACH_OMAP3EVM is not set ++CONFIG_MACH_OMAP3_BEAGLE=y ++# CONFIG_MACH_OVERO is not set ++# CONFIG_MACH_OMAP3_PANDORA is not set ++CONFIG_OMAP_TICK_GPTIMER=12 ++ ++# ++# Boot options ++# ++ ++# ++# Power management ++# ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=128 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++CONFIG_BINFMT_MISC=y ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++# CONFIG_PM_DEBUG is not set ++# CONFIG_SUSPEND is not set ++# CONFIG_APM_EMULATION is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++CONFIG_IP_PNP_RARP=y ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++CONFIG_WIRELESS=y ++# CONFIG_CFG80211 is not set ++CONFIG_WIRELESS_OLD_REGULATORY=y ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_IEEE80211 is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++# CONFIG_MTD_CMDLINE_PARTS is not set ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_OMAP2=y ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ALAUDA is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++# CONFIG_MISC_DEVICES is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_NET_ETHERNET is not set ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++# CONFIG_INPUT_MOUSEDEV is not set ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_NR_UARTS=32 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_MANY_PORTS=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_DETECT_IRQ=y ++CONFIG_SERIAL_8250_RSA=y ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_OMAP=y ++# CONFIG_I2C2_OMAP_BEAGLE is not set ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_TINY_USB is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_AT24 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_TWL4030_MADC is not set ++# CONFIG_TWL4030_PWRBUTTON is not set ++# CONFIG_TWL4030_POWEROFF is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_LP5521 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++CONFIG_GPIO_TWL4030=y ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++# CONFIG_WATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++CONFIG_TWL4030_CORE=y ++# CONFIG_TWL4030_POWER is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++CONFIG_DAB=y ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=m ++CONFIG_FB_CFB_COPYAREA=m ++CONFIG_FB_CFB_IMAGEBLIT=m ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4 ++CONFIG_FB_OMAP2=m ++# CONFIG_FB_OMAP2_DEBUG is not set ++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set ++CONFIG_FB_OMAP2_NUM_FBS=3 ++ ++# ++# OMAP2/3 Display Device Drivers ++# ++CONFIG_PANEL_GENERIC=m ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE is not set ++# CONFIG_LOGO is not set ++# CONFIG_SOUND is not set ++# CONFIG_HID_SUPPORT is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++CONFIG_USB_SUSPEND=y ++CONFIG_USB_OTG=y ++# CONFIG_USB_OTG_WHITELIST is not set ++# CONFIG_USB_OTG_BLACKLIST_HUB is not set ++CONFIG_USB_MON=y ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++# CONFIG_USB_EHCI_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++# CONFIG_USB_OHCI_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++CONFIG_USB_MUSB_HDRC=y ++CONFIG_USB_MUSB_SOC=y ++ ++# ++# OMAP 343x high speed USB support ++# ++# CONFIG_USB_MUSB_HOST is not set ++# CONFIG_USB_MUSB_PERIPHERAL is not set ++CONFIG_USB_MUSB_OTG=y ++CONFIG_USB_GADGET_MUSB_HDRC=y ++CONFIG_USB_MUSB_HDRC_HCD=y ++# CONFIG_MUSB_PIO_ONLY is not set ++CONFIG_USB_INVENTRA_DMA=y ++# CONFIG_USB_TI_CPPI_DMA is not set ++# CONFIG_USB_MUSB_DEBUG is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++# CONFIG_USB_STORAGE is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++# CONFIG_USB_GADGET_DEBUG_FS is not set ++CONFIG_USB_GADGET_VBUS_DRAW=2 ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++# CONFIG_USB_ZERO is not set ++CONFIG_USB_ETH=y ++CONFIG_USB_ETH_RNDIS=y ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++ ++# ++# OTG and related infrastructure ++# ++CONFIG_USB_OTG_UTILS=y ++# CONFIG_USB_GPIO_VBUS is not set ++# CONFIG_ISP1301_OMAP is not set ++CONFIG_TWL4030_USB=y ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++# CONFIG_MMC_SDHCI is not set ++CONFIG_MMC_OMAP_HS=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++CONFIG_RTC_DRV_TWL4030=y ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# CBUS support ++# ++# CONFIG_CBUS is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++CONFIG_QUOTA=y ++# CONFIG_QUOTA_NETLINK_INTERFACE is not set ++CONFIG_PRINT_QUOTA_WARNING=y ++# CONFIG_QFMT_V1 is not set ++CONFIG_QFMT_V2=y ++CONFIG_QUOTACTL=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++# CONFIG_JFFS2_LZO is not set ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++CONFIG_NFS_V4=y ++CONFIG_ROOT_NFS=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++CONFIG_SUNRPC_GSS=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++CONFIG_RPCSEC_GSS_KRB5=y ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_FS=y ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++# CONFIG_DEBUG_MEMORY_INIT is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_IRQSOFF_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++# CONFIG_DEBUG_LL is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_ALGAPI2=y ++CONFIG_CRYPTO_AEAD2=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_BLKCIPHER2=y ++CONFIG_CRYPTO_HASH2=y ++CONFIG_CRYPTO_RNG2=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_MANAGER2=y ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++CONFIG_CRYPTO_CBC=y ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++CONFIG_CRYPTO_ECB=m ++# CONFIG_CRYPTO_LRW is not set ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index fe97bab..61f0fc9 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -43,6 +43,8 @@ + #include + #include + #include ++#include ++#include + + #include "twl4030-generic-scripts.h" + #include "mmc-twl4030.h" +@@ -238,15 +240,6 @@ static void __init omap3_beagle_init_irq(void) + omap_gpio_init(); + } + +-static struct platform_device omap3_beagle_lcd_device = { +- .name = "omap3beagle_lcd", +- .id = -1, +-}; +- +-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { +- .ctrl_name = "internal", +-}; +- + static struct gpio_led gpio_leds[] = { + { + .name = "beagleboard::usr0", +@@ -300,13 +293,94 @@ static struct platform_device keys_gpio = { + }, + }; + ++/* DSS */ ++ ++static int beagle_enable_dvi(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 1); ++ ++ return 0; ++} ++ ++static void beagle_disable_dvi(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 0); ++} ++ ++static struct omap_display_data beagle_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-generic", ++ .u.dpi.data_lines = 24, ++ .panel_reset_gpio = 170, ++ .panel_enable = beagle_enable_dvi, ++ .panel_disable = beagle_disable_dvi, ++}; ++ ++ ++static int beagle_panel_enable_tv(struct omap_display *display) ++{ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ ++ return 0; ++} ++ ++static void beagle_panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_display_data beagle_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = beagle_panel_enable_tv, ++ .panel_disable = beagle_panel_disable_tv, ++}; ++ ++static struct omap_dss_platform_data beagle_dss_data = { ++ .num_displays = 2, ++ .displays = { ++ &beagle_display_data_dvi, ++ &beagle_display_data_tv, ++ } ++}; ++ ++static struct platform_device beagle_dss_device = { ++ .name = "omap-dss", ++ .id = -1, ++ .dev = { ++ .platform_data = &beagle_dss_data, ++ }, ++}; ++ ++static void __init beagle_display_init(void) ++{ ++ int r; ++ ++ r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset"); ++ if (r < 0) ++ printk(KERN_ERR "Unable to get DVI reset GPIO\n"); ++} ++ + static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { + { OMAP_TAG_UART, &omap3_beagle_uart_config }, +- { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, + }; + + static struct platform_device *omap3_beagle_devices[] __initdata = { +- &omap3_beagle_lcd_device, ++ &beagle_dss_device, + &leds_gpio, + &keys_gpio, + }; +@@ -359,18 +433,17 @@ static void __init omap3_beagle_init(void) + omap_serial_init(); + + omap_cfg_reg(J25_34XX_GPIO170); +- gpio_request(170, "DVI_nPD"); +- /* REVISIT leave DVI powered down until it's needed ... */ +- gpio_direction_output(170, true); + + usb_musb_init(); + usb_ehci_init(); + omap3beagle_flash_init(); ++ beagle_display_init(); + } + + static void __init omap3_beagle_map_io(void) + { + omap2_set_globals_343x(); ++ omap2_set_sdram_vram(1280 * 1024 * 4 * 3, 0); + omap2_map_common_io(); + } + +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0005-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch b/packages/linux/linux-omap/0005-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch deleted file mode 100644 index b0f66fbf8c..0000000000 --- a/packages/linux/linux-omap/0005-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch +++ /dev/null @@ -1,3590 +0,0 @@ -From a2bd3b5934be26656ba88ac1083cb76c9665822e Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Tue, 4 Nov 2008 15:12:21 +0200 -Subject: [PATCH] DSS: OMAPFB: fb driver for new display subsystem - -Signed-off-by: Tomi Valkeinen ---- - arch/arm/plat-omap/Makefile | 2 +- - arch/arm/plat-omap/fb-vram.c | 498 +++++++++++ - arch/arm/plat-omap/fb.c | 33 +- - arch/arm/plat-omap/include/mach/omapfb.h | 14 + - drivers/video/Kconfig | 1 + - drivers/video/Makefile | 1 + - drivers/video/omap/Kconfig | 5 +- - drivers/video/omap2/Kconfig | 38 + - drivers/video/omap2/Makefile | 2 + - drivers/video/omap2/omapfb-ioctl.c | 462 ++++++++++ - drivers/video/omap2/omapfb-main.c | 1382 ++++++++++++++++++++++++++++++ - drivers/video/omap2/omapfb-sysfs.c | 838 ++++++++++++++++++ - drivers/video/omap2/omapfb.h | 109 +++ - 13 files changed, 3377 insertions(+), 8 deletions(-) - create mode 100644 arch/arm/plat-omap/fb-vram.c - create mode 100644 drivers/video/omap2/Kconfig - create mode 100644 drivers/video/omap2/Makefile - create mode 100644 drivers/video/omap2/omapfb-ioctl.c - create mode 100644 drivers/video/omap2/omapfb-main.c - create mode 100644 drivers/video/omap2/omapfb-sysfs.c - create mode 100644 drivers/video/omap2/omapfb.h - -diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile -index 2740497..7d602a6 100644 ---- a/arch/arm/plat-omap/Makefile -+++ b/arch/arm/plat-omap/Makefile -@@ -4,7 +4,7 @@ - - # Common support - obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ -- usb.o fb.o io.o -+ usb.o fb.o fb-vram.o io.o - obj-m := - obj-n := - obj- := -diff --git a/arch/arm/plat-omap/fb-vram.c b/arch/arm/plat-omap/fb-vram.c -new file mode 100644 -index 0000000..de24503 ---- /dev/null -+++ b/arch/arm/plat-omap/fb-vram.c -@@ -0,0 +1,498 @@ -+/* -+ * linux/arch/arm/plat-omap/fb-vram.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+//#define DEBUG -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#ifdef DEBUG -+#define DBG(format, ...) printk(KERN_DEBUG "VRAM: " format, ## __VA_ARGS__) -+#else -+#define DBG(format, ...) -+#endif -+ -+#define OMAP2_SRAM_START 0x40200000 -+/* Maximum size, in reality this is smaller if SRAM is partially locked. */ -+#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */ -+ -+#define REG_MAP_SIZE(_page_cnt) \ -+ ((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8) -+#define REG_MAP_PTR(_rg, _page_nr) \ -+ (((_rg)->map) + (_page_nr) / (sizeof(unsigned long) * 8)) -+#define REG_MAP_MASK(_page_nr) \ -+ (1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1))) -+ -+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) \ -+ || defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) -+ -+/* postponed regions are used to temporarily store region information at boot -+ * time when we cannot yet allocate the region list */ -+#define MAX_POSTPONED_REGIONS 10 -+ -+static int postponed_cnt __initdata; -+static struct { -+ unsigned long paddr; -+ size_t size; -+} postponed_regions[MAX_POSTPONED_REGIONS] __initdata; -+ -+struct vram_alloc { -+ struct list_head list; -+ unsigned long paddr; -+ unsigned pages; -+}; -+ -+struct vram_region { -+ struct list_head list; -+ struct list_head alloc_list; -+ unsigned long paddr; -+ void *vaddr; -+ unsigned pages; -+ unsigned dma_alloced:1; -+}; -+ -+static DEFINE_MUTEX(region_mutex); -+static LIST_HEAD(region_list); -+ -+static inline int region_mem_type(unsigned long paddr) -+{ -+ if (paddr >= OMAP2_SRAM_START && -+ paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE) -+ return OMAPFB_MEMTYPE_SRAM; -+ else -+ return OMAPFB_MEMTYPE_SDRAM; -+} -+ -+static struct vram_region *omap_vram_create_region(unsigned long paddr, -+ void *vaddr, unsigned pages) -+{ -+ struct vram_region *rm; -+ -+ rm = kzalloc(sizeof(*rm), GFP_KERNEL); -+ -+ if (rm) { -+ INIT_LIST_HEAD(&rm->alloc_list); -+ rm->paddr = paddr; -+ rm->vaddr = vaddr; -+ rm->pages = pages; -+ } -+ -+ return rm; -+} -+ -+static void omap_vram_free_region(struct vram_region *vr) -+{ -+ list_del(&vr->list); -+ kfree(vr); -+} -+ -+static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr, -+ unsigned long paddr, unsigned pages) -+{ -+ struct vram_alloc *va; -+ struct vram_alloc *new; -+ -+ new = kzalloc(sizeof(*va), GFP_KERNEL); -+ -+ if (!new) -+ return NULL; -+ -+ new->paddr = paddr; -+ new->pages = pages; -+ -+ list_for_each_entry(va, &vr->alloc_list, list) { -+ if (va->paddr > new->paddr) -+ break; -+ } -+ -+ list_add_tail(&new->list, &va->list); -+ -+ return new; -+} -+ -+static void omap_vram_free_allocation(struct vram_alloc *va) -+{ -+ list_del(&va->list); -+ kfree(va); -+} -+ -+__init int omap_vram_add_region_postponed(unsigned long paddr, size_t size) -+{ -+ if (postponed_cnt == MAX_POSTPONED_REGIONS) -+ return -ENOMEM; -+ -+ postponed_regions[postponed_cnt].paddr = paddr; -+ postponed_regions[postponed_cnt].size = size; -+ -+ ++postponed_cnt; -+ -+ return 0; -+} -+ -+/* add/remove_region can be exported if there's need to add/remove regions -+ * runtime */ -+static int omap_vram_add_region(unsigned long paddr, size_t size) -+{ -+ struct vram_region *rm; -+ void *vaddr; -+ unsigned pages; -+ -+ DBG("adding region paddr %08lx size %d\n", -+ paddr, size); -+ -+ size &= PAGE_MASK; -+ pages = size >> PAGE_SHIFT; -+ -+ vaddr = ioremap_wc(paddr, size); -+ if (vaddr == NULL) -+ return -ENOMEM; -+ -+ rm = omap_vram_create_region(paddr, vaddr, pages); -+ if (rm == NULL) { -+ iounmap(vaddr); -+ return -ENOMEM; -+ } -+ -+ list_add(&rm->list, ®ion_list); -+ -+ return 0; -+} -+ -+#if 0 -+int omap_vram_remove_region(unsigned long paddr) -+{ -+ struct region *rm; -+ unsigned i; -+ -+ DBG("remove region paddr %08lx\n", paddr); -+ list_for_each_entry(rm, ®ion_list, list) -+ if (rm->paddr != paddr) -+ continue; -+ -+ if (rm->paddr != paddr) -+ return -EINVAL; -+ -+ for (i = 0; i < rm->page_cnt; i++) -+ if (region_page_reserved(rm, i)) -+ return -EBUSY; -+ -+ iounmap(rm->vaddr); -+ -+ list_del(&rm->list); -+ -+ kfree(rm); -+ -+ return 0; -+} -+#endif -+ -+int omap_vram_free(unsigned long paddr, void *vaddr, size_t size) -+{ -+ struct vram_region *rm; -+ struct vram_alloc *alloc; -+ unsigned start, end; -+ -+ DBG("free mem paddr %08lx vaddr %p size %d\n", -+ paddr, vaddr, size); -+ -+ size = PAGE_ALIGN(size); -+ -+ mutex_lock(®ion_mutex); -+ -+ list_for_each_entry(rm, ®ion_list, list) { -+ list_for_each_entry(alloc, &rm->alloc_list, list) { -+ start = alloc->paddr; -+ end = alloc->paddr + (alloc->pages >> PAGE_SHIFT); -+ -+ if (start >= paddr && end < paddr + size) -+ goto found; -+ } -+ } -+ -+ mutex_unlock(®ion_mutex); -+ return -EINVAL; -+ -+found: -+ if (rm->dma_alloced) { -+ DBG("freeing dma-alloced\n"); -+ dma_free_writecombine(NULL, size, vaddr, paddr); -+ omap_vram_free_allocation(alloc); -+ omap_vram_free_region(rm); -+ } else { -+ omap_vram_free_allocation(alloc); -+ } -+ -+ mutex_unlock(®ion_mutex); -+ return 0; -+} -+EXPORT_SYMBOL(omap_vram_free); -+ -+#if 0 -+void *omap_vram_reserve(unsigned long paddr, size_t size) -+{ -+ -+ struct region *rm; -+ unsigned start_page; -+ unsigned end_page; -+ unsigned i; -+ void *vaddr; -+ -+ size = PAGE_ALIGN(size); -+ -+ rm = region_find_region(paddr, size); -+ -+ DBG("reserve mem paddr %08lx size %d\n", -+ paddr, size); -+ -+ BUG_ON(rm == NULL); -+ -+ start_page = (paddr - rm->paddr) >> PAGE_SHIFT; -+ end_page = start_page + (size >> PAGE_SHIFT); -+ for (i = start_page; i < end_page; i++) -+ region_reserve_page(rm, i); -+ -+ vaddr = rm->vaddr + (start_page << PAGE_SHIFT); -+ -+ return vaddr; -+} -+EXPORT_SYMBOL(omap_vram_reserve); -+#endif -+static void *_omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr) -+{ -+ struct vram_region *rm; -+ struct vram_alloc *alloc; -+ void *vaddr; -+ -+ list_for_each_entry(rm, ®ion_list, list) { -+ unsigned long start, end; -+ -+ DBG("checking region %lx %d\n", rm->paddr, rm->pages); -+ -+ if (region_mem_type(rm->paddr) != mtype) -+ continue; -+ -+ start = rm->paddr; -+ -+ list_for_each_entry(alloc, &rm->alloc_list, list) { -+ end = alloc->paddr; -+ -+ if (end - start >= pages << PAGE_SHIFT) -+ goto found; -+ -+ start = alloc->paddr + (alloc->pages << PAGE_SHIFT); -+ } -+ -+ end = rm->paddr + (rm->pages << PAGE_SHIFT); -+found: -+ if (end - start < pages << PAGE_SHIFT) -+ continue; -+ -+ DBG("FOUND %lx, end %lx\n", start, end); -+ -+ if (omap_vram_create_allocation(rm, start, pages) == NULL) -+ return NULL; -+ -+ *paddr = start; -+ vaddr = rm->vaddr + (start - rm->paddr); -+ -+ return vaddr; -+ } -+ -+ return NULL; -+} -+ -+static void *_omap_vram_alloc_dma(unsigned pages, unsigned long *paddr) -+{ -+ struct vram_region *rm; -+ void *vaddr; -+ -+ vaddr = dma_alloc_writecombine(NULL, pages << PAGE_SHIFT, -+ (dma_addr_t *)paddr, GFP_KERNEL); -+ -+ if (vaddr == NULL) -+ return NULL; -+ -+ rm = omap_vram_create_region(*paddr, vaddr, pages); -+ if (rm == NULL) { -+ dma_free_writecombine(NULL, pages << PAGE_SHIFT, vaddr, -+ (dma_addr_t)*paddr); -+ return NULL; -+ } -+ -+ rm->dma_alloced = 1; -+ -+ if (omap_vram_create_allocation(rm, *paddr, pages) == NULL) { -+ dma_free_writecombine(NULL, pages << PAGE_SHIFT, vaddr, -+ (dma_addr_t)*paddr); -+ kfree(rm); -+ return NULL; -+ } -+ -+ list_add(&rm->list, ®ion_list); -+ -+ return vaddr; -+} -+ -+void *omap_vram_alloc(int mtype, size_t size, unsigned long *paddr) -+{ -+ void *vaddr; -+ unsigned pages; -+ -+ BUG_ON(mtype > OMAPFB_MEMTYPE_MAX || !size); -+ -+ DBG("alloc mem type %d size %d\n", mtype, size); -+ -+ size = PAGE_ALIGN(size); -+ pages = size >> PAGE_SHIFT; -+ -+ mutex_lock(®ion_mutex); -+ -+ vaddr = _omap_vram_alloc(mtype, pages, paddr); -+ -+ if (vaddr == NULL && mtype == OMAPFB_MEMTYPE_SDRAM) { -+ DBG("fallback to dma_alloc\n"); -+ -+ vaddr = _omap_vram_alloc_dma(pages, paddr); -+ } -+ -+ mutex_unlock(®ion_mutex); -+ -+ return vaddr; -+} -+EXPORT_SYMBOL(omap_vram_alloc); -+ -+#ifdef CONFIG_PROC_FS -+static void *r_next(struct seq_file *m, void *v, loff_t *pos) -+{ -+ struct list_head *l = v; -+ -+ (*pos)++; -+ -+ if (list_is_last(l, ®ion_list)) -+ return 0; -+ -+ return l->next; -+} -+ -+static void *r_start(struct seq_file *m, loff_t *pos) -+{ -+ loff_t p = *pos; -+ struct list_head *l = ®ion_list; -+ -+ mutex_lock(®ion_mutex); -+ -+ do { -+ l = l->next; -+ if (l == ®ion_list) -+ return NULL; -+ } while (p--); -+ -+ return l; -+} -+ -+static void r_stop(struct seq_file *m, void *v) -+{ -+ mutex_unlock(®ion_mutex); -+} -+ -+static int r_show(struct seq_file *m, void *v) -+{ -+ struct vram_region *vr; -+ struct vram_alloc *va; -+ unsigned size; -+ -+ vr = list_entry(v, struct vram_region, list); -+ -+ size = vr->pages << PAGE_SHIFT; -+ seq_printf(m, "%08lx-%08lx v:%p-%p (%d bytes) %s\n", -+ vr->paddr, vr->paddr + size, -+ vr->vaddr, vr->vaddr + size, -+ size, -+ vr->dma_alloced ? "dma_alloc" : ""); -+ -+ list_for_each_entry(va, &vr->alloc_list, list) { -+ size = va->pages << PAGE_SHIFT; -+ seq_printf(m, " %08lx-%08lx (%d bytes)\n", -+ va->paddr, va->paddr + size, -+ size); -+ } -+ -+ -+ -+ return 0; -+} -+ -+static const struct seq_operations resource_op = { -+ .start = r_start, -+ .next = r_next, -+ .stop = r_stop, -+ .show = r_show, -+}; -+ -+static int vram_open(struct inode *inode, struct file *file) -+{ -+ return seq_open(file, &resource_op); -+} -+ -+static const struct file_operations proc_vram_operations = { -+ .open = vram_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = seq_release, -+}; -+ -+static int __init omap_vram_create_proc(void) -+{ -+ proc_create("omap-vram", 0, NULL, &proc_vram_operations); -+ -+ return 0; -+} -+#endif -+ -+static __init int omap_vram_init(void) -+{ -+ int i, r; -+ -+ for (i = 0; i < postponed_cnt; i++) -+ omap_vram_add_region(postponed_regions[i].paddr, -+ postponed_regions[i].size); -+ -+#ifdef CONFIG_PROC_FS -+ r = omap_vram_create_proc(); -+ if (r) -+ return -ENOMEM; -+#endif -+ -+ return 0; -+} -+ -+arch_initcall(omap_vram_init); -+ -+#endif -+ -diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c -index 3746222..da528d0 100644 ---- a/arch/arm/plat-omap/fb.c -+++ b/arch/arm/plat-omap/fb.c -@@ -36,7 +36,11 @@ - #include - #include - --#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) -+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) \ -+ || defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) -+ -+static int omapfb_vram_count; -+static struct omap_fbmem_config *omapfb_vram_config; - - static struct omapfb_platform_data omapfb_config; - static int config_invalid; -@@ -95,11 +99,11 @@ static int get_fbmem_region(int region_idx, struct omapfb_mem_region *rg) - const struct omap_fbmem_config *conf; - u32 paddr; - -- conf = omap_get_nr_config(OMAP_TAG_FBMEM, -- struct omap_fbmem_config, region_idx); -- if (conf == NULL) -+ if (region_idx >= omapfb_vram_count) - return -ENOENT; - -+ conf = &omapfb_vram_config[region_idx]; -+ - paddr = conf->start; - /* - * Low bits encode the page allocation mode, if high bits -@@ -209,6 +213,13 @@ void __init omapfb_reserve_sdram(void) - if (rg.paddr) { - reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT); - reserved += rg.size; -+ omap_vram_add_region_postponed(rg.paddr, rg.size); -+ } else { -+ void *vaddr; -+ vaddr = alloc_bootmem(rg.size); -+ rg.paddr = virt_to_phys(vaddr); -+ reserved += rg.size; -+ omap_vram_add_region_postponed(rg.paddr, rg.size); - } - omapfb_config.mem_desc.region[i] = rg; - configured_regions++; -@@ -229,7 +240,7 @@ void __init omapfb_reserve_sdram(void) - * this point, since the driver built as a module would have problem with - * freeing / reallocating the regions. - */ --unsigned long omapfb_reserve_sram(unsigned long sram_pstart, -+unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, -@@ -298,14 +309,24 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart, - return reserved; - } - -+void __init omapfb_set_vram_config(struct omap_fbmem_config *config, int count) -+{ -+ omapfb_vram_count = count; -+ omapfb_vram_config = config; -+} -+ -+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) - void omapfb_set_ctrl_platform_data(void *data) - { - omapfb_config.ctrl_platform_data = data; - } -+#endif - - static inline int omap_init_fb(void) - { -+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) - const struct omap_lcd_config *conf; -+#endif - - if (config_invalid) - return 0; -@@ -313,6 +334,7 @@ static inline int omap_init_fb(void) - printk(KERN_ERR "Invalid FB mem configuration entries\n"); - return 0; - } -+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf == NULL) { - if (configured_regions) -@@ -321,6 +343,7 @@ static inline int omap_init_fb(void) - return 0; - } - omapfb_config.lcd = *conf; -+#endif - - return platform_device_register(&omap_fb_device); - } -diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h -index 90d63c5..277e3cf 100644 ---- a/arch/arm/plat-omap/include/mach/omapfb.h -+++ b/arch/arm/plat-omap/include/mach/omapfb.h -@@ -90,6 +90,13 @@ enum omapfb_color_format { - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, -+ -+ OMAPFB_COLOR_ARGB16, -+ OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ -+ OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ -+ OMAPFB_COLOR_ARGB32, -+ OMAPFB_COLOR_RGBA32, -+ OMAPFB_COLOR_RGBX32, - }; - - struct omapfb_update_window { -@@ -392,6 +399,13 @@ extern int omapfb_update_window_async(struct fb_info *fbi, - - /* in arch/arm/plat-omap/fb.c */ - extern void omapfb_set_ctrl_platform_data(void *pdata); -+extern void omapfb_set_vram_config(struct omap_fbmem_config *config, int count); -+ -+/* in arch/arm/plat-omap/fb-vram */ -+__init int omap_vram_add_region_postponed(unsigned long paddr, size_t size); -+int omap_vram_free(unsigned long paddr, void *vaddr, size_t size); -+void *omap_vram_reserve(unsigned long paddr, size_t size); -+void *omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); - - #endif /* __KERNEL__ */ - -diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig -index 3f3ce13..689a3b1 100644 ---- a/drivers/video/Kconfig -+++ b/drivers/video/Kconfig -@@ -2116,6 +2116,7 @@ config FB_PRE_INIT_FB - the bootloader. - - source "drivers/video/omap/Kconfig" -+source "drivers/video/omap2/Kconfig" - - source "drivers/video/backlight/Kconfig" - source "drivers/video/display/Kconfig" -diff --git a/drivers/video/Makefile b/drivers/video/Makefile -index e39e33e..3d9d50e 100644 ---- a/drivers/video/Makefile -+++ b/drivers/video/Makefile -@@ -120,6 +120,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o - obj-$(CONFIG_FB_XILINX) += xilinxfb.o - obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o - obj-$(CONFIG_FB_OMAP) += omap/ -+obj-$(CONFIG_OMAP2_DSS) += omap2/ - obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o - obj-$(CONFIG_FB_CARMINE) += carminefb.o - obj-$(CONFIG_FB_MB862XX) += mb862xx/ -diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig -index c355b59..541fab3 100644 ---- a/drivers/video/omap/Kconfig -+++ b/drivers/video/omap/Kconfig -@@ -1,6 +1,7 @@ - config FB_OMAP - tristate "OMAP frame buffer support (EXPERIMENTAL)" -- depends on FB && ARCH_OMAP -+ depends on FB && ARCH_OMAP && (OMAP2_DSS = "n") -+ - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT -@@ -80,7 +81,7 @@ config FB_OMAP_BOOTLOADER_INIT - - config FB_OMAP_CONSISTENT_DMA_SIZE - int "Consistent DMA memory size (MB)" -- depends on FB_OMAP -+ depends on FB && ARCH_OMAP - range 1 14 - default 2 - help -diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig -new file mode 100644 -index 0000000..bfa1617 ---- /dev/null -+++ b/drivers/video/omap2/Kconfig -@@ -0,0 +1,38 @@ -+config FB_OMAP2 -+ tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" -+ depends on FB && OMAP2_DSS -+ -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ help -+ Frame buffer driver for OMAP2/3 based boards. -+ -+config FB_OMAP2_DEBUG -+ bool "Debug output for OMAP2/3 FB" -+ depends on FB_OMAP2 -+ -+config FB_OMAP2_FORCE_AUTO_UPDATE -+ bool "Force main display to automatic update mode" -+ depends on FB_OMAP2 -+ help -+ Forces main display to automatic update mode (if possible), -+ and also enables tearsync (if possible). By default -+ displays that support manual update are started in manual -+ update mode. -+ -+config FB_OMAP2_NUM_FBS -+ int "Number of framebuffers" -+ range 1 10 -+ default 3 -+ depends on FB_OMAP2 -+ help -+ Select the number of framebuffers created. OMAP2/3 has 3 overlays -+ so normally this would be 3. -+ -+menu "OMAP2/3 Display Device Drivers" -+ depends on OMAP2_DSS -+ -+ -+endmenu -+ -diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile -new file mode 100644 -index 0000000..51c2e00 ---- /dev/null -+++ b/drivers/video/omap2/Makefile -@@ -0,0 +1,2 @@ -+obj-$(CONFIG_FB_OMAP2) += omapfb.o -+omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o -diff --git a/drivers/video/omap2/omapfb-ioctl.c b/drivers/video/omap2/omapfb-ioctl.c -new file mode 100644 -index 0000000..6bf750f ---- /dev/null -+++ b/drivers/video/omap2/omapfb-ioctl.c -@@ -0,0 +1,462 @@ -+/* -+ * linux/drivers/video/omap2/omapfb-ioctl.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "omapfb.h" -+ -+static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omap_display *display = fb2display(fbi); -+ struct omap_overlay *ovl; -+ int r = 0; -+ -+ DBG("omapfb_setup_plane\n"); -+ -+ omapfb_lock(fbdev); -+ -+ if (ofbi->num_overlays != 1) { -+ r = -EINVAL; -+ goto out; -+ } -+ -+ /* XXX uses only the first overlay */ -+ ovl = ofbi->overlays[0]; -+ -+ if (pi->enabled && !ofbi->region.size) { -+ /* -+ * This plane's memory was freed, can't enable it -+ * until it's reallocated. -+ */ -+ r = -EINVAL; -+ goto out; -+ } -+ -+ if (pi->enabled) { -+ r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y, -+ pi->out_width, pi->out_height); -+ if (r) -+ goto out; -+ } -+ -+ r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y, -+ pi->out_width, pi->out_height); -+ if (r) -+ goto out; -+ -+ ovl->enable(ovl, pi->enabled); -+ -+ if (ovl->manager) -+ ovl->manager->apply(ovl->manager); -+ -+ if (display) { -+ if (display->sync) -+ display->sync(display); -+ -+ if (display->update) -+ display->update(display, 0, 0, -+ display->x_res, display->y_res); -+ } -+ -+out: -+ omapfb_unlock(fbdev); -+ if (r) -+ dev_err(fbdev->dev, "setup_plane failed\n"); -+ return r; -+} -+ -+static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ -+ omapfb_lock(fbdev); -+ -+ if (ofbi->num_overlays != 1) { -+ memset(pi, 0, sizeof(*pi)); -+ } else { -+ struct omap_overlay_info *ovli; -+ struct omap_overlay *ovl; -+ -+ ovl = ofbi->overlays[0]; -+ ovli = &ovl->info; -+ -+ pi->pos_x = ovli->pos_x; -+ pi->pos_y = ovli->pos_y; -+ pi->enabled = ovli->enabled; -+ pi->channel_out = 0; /* xxx */ -+ pi->mirror = 0; -+ pi->out_width = ovli->out_width; -+ pi->out_height = ovli->out_height; -+ } -+ -+ omapfb_unlock(fbdev); -+ -+ return 0; -+} -+ -+static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omapfb_mem_region *rg; -+ struct omap_display *display = fb2display(fbi); -+ int r, i; -+ size_t size; -+ -+ if (mi->type > OMAPFB_MEMTYPE_MAX) -+ return -EINVAL; -+ -+ size = PAGE_ALIGN(mi->size); -+ -+ rg = &ofbi->region; -+ -+ omapfb_lock(fbdev); -+ -+ for (i = 0; i < ofbi->num_overlays; i++) { -+ if (ofbi->overlays[i]->info.enabled) { -+ r = -EBUSY; -+ goto out; -+ } -+ } -+ -+ if (rg->size != size || rg->type != mi->type) { -+ struct fb_var_screeninfo new_var; -+ unsigned long old_size = rg->size; -+ -+ if (display->sync) -+ display->sync(display); -+ -+ r = omapfb_realloc_fbmem(fbdev, ofbi->id, size); -+ if (r) -+ goto out; -+ -+ if (old_size != size) { -+ if (size) { -+ memcpy(&new_var, &fbi->var, sizeof(new_var)); -+ r = check_fb_var(fbi, &new_var); -+ if (r < 0) -+ goto out; -+ memcpy(&fbi->var, &new_var, sizeof(fbi->var)); -+ set_fb_fix(fbi); -+ } else { -+ /* -+ * Set these explicitly to indicate that the -+ * plane memory is dealloce'd, the other -+ * screen parameters in var / fix are invalid. -+ */ -+ fbi->fix.smem_start = 0; -+ fbi->fix.smem_len = 0; -+ } -+ } -+ } -+ -+ r = 0; -+out: -+ omapfb_unlock(fbdev); -+ -+ return r; -+} -+ -+static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omapfb_mem_region *rg; -+ -+ rg = &ofbi->region; -+ memset(mi, 0, sizeof(*mi)); -+ -+ omapfb_lock(fbdev); -+ mi->size = rg->size; -+ mi->type = rg->type; -+ omapfb_unlock(fbdev); -+ -+ return 0; -+} -+ -+static int omapfb_update_window(struct fb_info *fbi, -+ u32 x, u32 y, u32 w, u32 h) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omap_display *display = fb2display(fbi); -+ -+ if (!display) -+ return 0; -+ -+ if (w == 0 || h == 0) -+ return 0; -+ -+ if (x + w > display->x_res || y + h > display->y_res) -+ return -EINVAL; -+ -+ omapfb_lock(fbdev); -+ display->update(display, x, y, w, h); -+ omapfb_unlock(fbdev); -+ -+ return 0; -+} -+ -+static int omapfb_set_update_mode(struct fb_info *fbi, -+ enum omapfb_update_mode mode) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omap_display *display = fb2display(fbi); -+ enum omap_dss_update_mode um; -+ int r; -+ -+ if (!display || !display->set_update_mode) -+ return -EINVAL; -+ -+ switch (mode) { -+ case OMAPFB_UPDATE_DISABLED: -+ um = OMAP_DSS_UPDATE_DISABLED; -+ break; -+ -+ case OMAPFB_AUTO_UPDATE: -+ um = OMAP_DSS_UPDATE_AUTO; -+ break; -+ -+ case OMAPFB_MANUAL_UPDATE: -+ um = OMAP_DSS_UPDATE_MANUAL; -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ -+ omapfb_lock(fbdev); -+ r = display->set_update_mode(display, um); -+ omapfb_unlock(fbdev); -+ -+ return r; -+} -+ -+static int omapfb_get_update_mode(struct fb_info *fbi, -+ enum omapfb_update_mode *mode) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omap_display *display = fb2display(fbi); -+ enum omap_dss_update_mode m; -+ -+ if (!display || !display->get_update_mode) -+ return -EINVAL; -+ -+ omapfb_lock(fbdev); -+ m = display->get_update_mode(display); -+ omapfb_unlock(fbdev); -+ -+ switch (m) { -+ case OMAP_DSS_UPDATE_DISABLED: -+ *mode = OMAPFB_UPDATE_DISABLED; -+ break; -+ case OMAP_DSS_UPDATE_AUTO: -+ *mode = OMAPFB_AUTO_UPDATE; -+ break; -+ case OMAP_DSS_UPDATE_MANUAL: -+ *mode = OMAPFB_MANUAL_UPDATE; -+ break; -+ default: -+ BUG(); -+ } -+ -+ return 0; -+} -+ -+int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omap_display *display = fb2display(fbi); -+ -+ union { -+ struct omapfb_update_window_old uwnd_o; -+ struct omapfb_update_window uwnd; -+ struct omapfb_plane_info plane_info; -+ struct omapfb_caps caps; -+ struct omapfb_mem_info mem_info; -+ enum omapfb_update_mode update_mode; -+ int test_num; -+ } p; -+ -+ int r = 0; -+ -+ DBG("ioctl %x (%d)\n", cmd, cmd & 0xff); -+ -+ switch (cmd) { -+ case OMAPFB_SYNC_GFX: -+ if (!display || !display->sync) { -+ r = -EINVAL; -+ break; -+ } -+ -+ omapfb_lock(fbdev); -+ r = display->sync(display); -+ omapfb_unlock(fbdev); -+ break; -+ -+ case OMAPFB_UPDATE_WINDOW_OLD: -+ if (!display || !display->update) { -+ r = -EINVAL; -+ break; -+ } -+ -+ if (copy_from_user(&p.uwnd_o, -+ (void __user *)arg, -+ sizeof(p.uwnd_o))) { -+ r = -EFAULT; -+ break; -+ } -+ -+ r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y, -+ p.uwnd_o.width, p.uwnd_o.height); -+ break; -+ -+ case OMAPFB_UPDATE_WINDOW: -+ if (!display || !display->update) { -+ r = -EINVAL; -+ break; -+ } -+ -+ if (copy_from_user(&p.uwnd, (void __user *)arg, -+ sizeof(p.uwnd))) { -+ r = -EFAULT; -+ break; -+ } -+ -+ r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y, -+ p.uwnd.width, p.uwnd.height); -+ break; -+ -+ case OMAPFB_SETUP_PLANE: -+ if (copy_from_user(&p.plane_info, (void __user *)arg, -+ sizeof(p.plane_info))) -+ r = -EFAULT; -+ else -+ r = omapfb_setup_plane(fbi, &p.plane_info); -+ break; -+ -+ case OMAPFB_QUERY_PLANE: -+ r = omapfb_query_plane(fbi, &p.plane_info); -+ if (r < 0) -+ break; -+ if (copy_to_user((void __user *)arg, &p.plane_info, -+ sizeof(p.plane_info))) -+ r = -EFAULT; -+ break; -+ -+ case OMAPFB_SETUP_MEM: -+ if (copy_from_user(&p.mem_info, (void __user *)arg, -+ sizeof(p.mem_info))) -+ r = -EFAULT; -+ else -+ r = omapfb_setup_mem(fbi, &p.mem_info); -+ break; -+ -+ case OMAPFB_QUERY_MEM: -+ r = omapfb_query_mem(fbi, &p.mem_info); -+ if (r < 0) -+ break; -+ if (copy_to_user((void __user *)arg, &p.mem_info, -+ sizeof(p.mem_info))) -+ r = -EFAULT; -+ break; -+ -+ case OMAPFB_GET_CAPS: -+ if (!display) { -+ r = -EINVAL; -+ break; -+ } -+ -+ p.caps.ctrl = display->caps; -+ -+ if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps))) -+ r = -EFAULT; -+ break; -+ -+ case OMAPFB_SET_UPDATE_MODE: -+ if (get_user(p.update_mode, (int __user *)arg)) -+ r = -EFAULT; -+ else -+ r = omapfb_set_update_mode(fbi, p.update_mode); -+ break; -+ -+ case OMAPFB_GET_UPDATE_MODE: -+ r = omapfb_get_update_mode(fbi, &p.update_mode); -+ if (r) -+ break; -+ if (put_user(p.update_mode, -+ (enum omapfb_update_mode __user *)arg)) -+ r = -EFAULT; -+ break; -+ -+ /* LCD and CTRL tests do the same thing for backward -+ * compatibility */ -+ case OMAPFB_LCD_TEST: -+ if (get_user(p.test_num, (int __user *)arg)) { -+ r = -EFAULT; -+ break; -+ } -+ if (!display || !display->run_test) { -+ r = -EINVAL; -+ break; -+ } -+ -+ r = display->run_test(display, p.test_num); -+ -+ break; -+ -+ case OMAPFB_CTRL_TEST: -+ if (get_user(p.test_num, (int __user *)arg)) { -+ r = -EFAULT; -+ break; -+ } -+ if (!display || !display->run_test) { -+ r = -EINVAL; -+ break; -+ } -+ -+ r = display->run_test(display, p.test_num); -+ -+ break; -+ -+ default: -+ DBG("ioctl unhandled\n"); -+ r = -EINVAL; -+ } -+ -+ return r; -+} -+ -+ -diff --git a/drivers/video/omap2/omapfb-main.c b/drivers/video/omap2/omapfb-main.c -new file mode 100644 -index 0000000..89ad631 ---- /dev/null -+++ b/drivers/video/omap2/omapfb-main.c -@@ -0,0 +1,1382 @@ -+/* -+ * linux/drivers/video/omap2/omapfb-main.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "omapfb.h" -+ -+#define MODULE_NAME "omapfb" -+ -+#ifdef DEBUG -+static void fill_fb(void *addr, struct fb_info *fbi) -+{ -+ struct fb_var_screeninfo *var = &fbi->var; -+ -+ const short w = var->xres_virtual; -+ const short h = var->yres_virtual; -+ -+ int y, x; -+ u8 *p = addr; -+ -+ for (y = 0; y < h; y++) { -+ for (x = 0; x < w; x++) { -+ if (var->bits_per_pixel == 16) { -+ u16 *pw = (u16 *)p; -+ -+ if (x < 20 && y < 20) -+ *pw = 0xffff; -+ else if (x == 20 || x == w - 20 || -+ y == 20 || y == h - 20) -+ *pw = 0xffff; -+ else if (x == y || w - x == h - y) -+ *pw = ((1<<5)-1)<<11; -+ else if (w - x == y || x == h - y) -+ *pw = ((1<<6)-1)<<5; -+ else { -+ int t = x / (w/3); -+ if (t == 0) -+ *pw = y % 32; -+ else if (t == 1) -+ *pw = (y % 64) << 5; -+ else if (t == 2) -+ *pw = (y % 32) << 11; -+ } -+ } else if (var->bits_per_pixel == 24) { -+ u8 *pb = (u8 *)p; -+ -+ int r = 0, g = 0, b = 0; -+ -+ if (x < 20 && y < 20) -+ r = g = b = 0xff; -+ else if (x == 20 || x == w - 20 || -+ y == 20 || y == h - 20) -+ r = g = b = 0xff; -+ else if (x == y || w - x == h - y) -+ r = 0xff; -+ else if (w - x == y || x == h - y) -+ g = 0xff; -+ else { -+ int q = x / (w / 3); -+ u8 base = 255 - (y % 256); -+ if (q == 0) -+ r = base; -+ else if (q == 1) -+ g = base; -+ else if (q == 2) -+ b = base; -+ } -+ -+ pb[0] = b; -+ pb[1] = g; -+ pb[2] = r; -+ -+ } else if (var->bits_per_pixel == 32) { -+ u32 *pd = (u32 *)p; -+ -+ if (x == 20 || x == w - 20 || -+ y == 20 || y == h - 20) -+ *pd = 0xffffff; -+ else if (x == y || w - x == h - y) -+ *pd = 0xff0000; -+ else if (w - x == y || x == h - y) -+ *pd = 0x00ff00; -+ else { -+ u8 base = 255 - (y % 256); -+ *pd = base << ((x / (w/3)) << 3); -+ } -+ } -+ -+ p += var->bits_per_pixel >> 3; -+ } -+ } -+} -+#endif -+ -+static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var) -+{ -+ switch (var->nonstd) { -+ case 0: -+ break; -+ case OMAPFB_COLOR_YUV422: -+ return OMAP_DSS_COLOR_UYVY; -+ -+ case OMAPFB_COLOR_YUY422: -+ return OMAP_DSS_COLOR_YUV2; -+ -+ case OMAPFB_COLOR_ARGB16: -+ return OMAP_DSS_COLOR_ARGB16; -+ -+ case OMAPFB_COLOR_ARGB32: -+ return OMAP_DSS_COLOR_ARGB32; -+ -+ case OMAPFB_COLOR_RGBA32: -+ return OMAP_DSS_COLOR_RGBA32; -+ -+ case OMAPFB_COLOR_RGBX32: -+ return OMAP_DSS_COLOR_RGBX32; -+ -+ default: -+ return -EINVAL; -+ } -+ -+ switch (var->bits_per_pixel) { -+ case 1: -+ return OMAP_DSS_COLOR_CLUT1; -+ case 2: -+ return OMAP_DSS_COLOR_CLUT2; -+ case 4: -+ return OMAP_DSS_COLOR_CLUT4; -+ case 8: -+ return OMAP_DSS_COLOR_CLUT8; -+ case 12: -+ return OMAP_DSS_COLOR_RGB12U; -+ case 16: -+ return OMAP_DSS_COLOR_RGB16; -+ case 24: -+ return OMAP_DSS_COLOR_RGB24P; -+ case 32: -+ return OMAP_DSS_COLOR_RGB24U; -+ default: -+ return -EINVAL; -+ } -+ -+ return -EINVAL; -+} -+ -+void set_fb_fix(struct fb_info *fbi) -+{ -+ struct fb_fix_screeninfo *fix = &fbi->fix; -+ struct fb_var_screeninfo *var = &fbi->var; -+ struct omapfb_mem_region *rg = &FB2OFB(fbi)->region; -+ -+ DBG("set_fb_fix\n"); -+ -+ /* used by open/write in fbmem.c */ -+ fbi->screen_base = (char __iomem *)rg->vaddr; -+ -+ /* used by mmap in fbmem.c */ -+ fix->smem_start = rg->paddr; -+ fix->smem_len = rg->size; -+ -+ fix->type = FB_TYPE_PACKED_PIXELS; -+ -+ if (var->nonstd) -+ fix->visual = FB_VISUAL_PSEUDOCOLOR; -+ else { -+ switch (var->bits_per_pixel) { -+ case 32: -+ case 24: -+ case 16: -+ case 12: -+ fix->visual = FB_VISUAL_TRUECOLOR; -+ /* 12bpp is stored in 16 bits */ -+ break; -+ case 1: -+ case 2: -+ case 4: -+ case 8: -+ fix->visual = FB_VISUAL_PSEUDOCOLOR; -+ break; -+ } -+ } -+ -+ fix->accel = FB_ACCEL_NONE; -+ fix->line_length = (var->xres_virtual * var->bits_per_pixel) >> 3; -+ -+ fix->xpanstep = 1; -+ fix->ypanstep = 1; -+} -+ -+/* check new var and possibly modify it to be ok */ -+int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omap_display *display = fb2display(fbi); -+ unsigned long max_frame_size; -+ unsigned long line_size; -+ int xres_min, xres_max; -+ int yres_min, yres_max; -+ enum omap_color_mode mode = 0; -+ struct omap_overlay *ovl; -+ -+ DBG("check_fb_var %d\n", ofbi->id); -+ -+ if (ofbi->region.size == 0) { -+ memset(var, 0, sizeof(*var)); -+ return 0; -+ } -+ -+ if (ofbi->num_overlays == 0) { -+ dev_err(ofbi->fbdev->dev, "no overlays, aborting\n"); -+ return -EINVAL; -+ } -+ -+ /* XXX: uses the first overlay */ -+ ovl = ofbi->overlays[0]; -+ -+ /* if we are using non standard mode, fix the bpp first */ -+ switch (var->nonstd) { -+ case 0: -+ break; -+ case OMAPFB_COLOR_YUV422: -+ case OMAPFB_COLOR_YUY422: -+ case OMAPFB_COLOR_ARGB16: -+ var->bits_per_pixel = 16; -+ break; -+ case OMAPFB_COLOR_ARGB32: -+ case OMAPFB_COLOR_RGBA32: -+ case OMAPFB_COLOR_RGBX32: -+ var->bits_per_pixel = 32; -+ break; -+ default: -+ DBG("invalid nonstd mode\n"); -+ return -EINVAL; -+ } -+ -+ mode = fb_mode_to_dss_mode(var); -+ if (mode < 0) { -+ DBG("cannot convert var to omap dss mode\n"); -+ return -EINVAL; -+ } -+ -+ if ((ovl->supported_modes & mode) == 0) { -+ DBG("invalid mode\n"); -+ return -EINVAL; -+ } -+ -+ xres_min = OMAPFB_PLANE_XRES_MIN; -+ xres_max = (display ? display->x_res : 2048) - ovl->info.pos_x; -+ yres_min = OMAPFB_PLANE_YRES_MIN; -+ yres_max = (display ? display->y_res : 2048) - ovl->info.pos_y; -+ -+ if (var->xres < xres_min) -+ var->xres = xres_min; -+ if (var->yres < yres_min) -+ var->yres = yres_min; -+ if (var->xres_virtual < var->xres) -+ var->xres_virtual = var->xres; -+ if (var->yres_virtual < var->yres) -+ var->yres_virtual = var->yres; -+ max_frame_size = ofbi->region.size; -+ line_size = (var->xres_virtual * var->bits_per_pixel) >> 3; -+ -+ if (line_size * var->yres_virtual > max_frame_size) { -+ /* Try to keep yres_virtual first */ -+ line_size = max_frame_size / var->yres_virtual; -+ var->xres_virtual = line_size * 8 / var->bits_per_pixel; -+ if (var->xres_virtual < var->xres) { -+ /* Still doesn't fit. Shrink yres_virtual too */ -+ var->xres_virtual = var->xres; -+ line_size = var->xres * var->bits_per_pixel / 8; -+ var->yres_virtual = max_frame_size / line_size; -+ } -+ /* Recheck this, as the virtual size changed. */ -+ if (var->xres_virtual < var->xres) -+ var->xres = var->xres_virtual; -+ if (var->yres_virtual < var->yres) -+ var->yres = var->yres_virtual; -+ if (var->xres < xres_min || var->yres < yres_min) { -+ DBG("Cannot fit FB to memory\n"); -+ return -EINVAL; -+ } -+ } -+ if (var->xres + var->xoffset > var->xres_virtual) -+ var->xoffset = var->xres_virtual - var->xres; -+ if (var->yres + var->yoffset > var->yres_virtual) -+ var->yoffset = var->yres_virtual - var->yres; -+ -+ if (var->bits_per_pixel == 16) { -+ var->red.offset = 11; var->red.length = 5; -+ var->red.msb_right = 0; -+ var->green.offset = 5; var->green.length = 6; -+ var->green.msb_right = 0; -+ var->blue.offset = 0; var->blue.length = 5; -+ var->blue.msb_right = 0; -+ } else if (var->bits_per_pixel == 24) { -+ var->red.offset = 16; var->red.length = 8; -+ var->red.msb_right = 0; -+ var->green.offset = 8; var->green.length = 8; -+ var->green.msb_right = 0; -+ var->blue.offset = 0; var->blue.length = 8; -+ var->blue.msb_right = 0; -+ var->transp.offset = 0; var->transp.length = 0; -+ } else if (var->bits_per_pixel == 32) { -+ var->red.offset = 16; var->red.length = 8; -+ var->red.msb_right = 0; -+ var->green.offset = 8; var->green.length = 8; -+ var->green.msb_right = 0; -+ var->blue.offset = 0; var->blue.length = 8; -+ var->blue.msb_right = 0; -+ var->transp.offset = 0; var->transp.length = 0; -+ } else { -+ DBG("failed to setup fb color mask\n"); -+ return -EINVAL; -+ } -+ -+ DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n", -+ var->xres, var->yres, -+ var->xres_virtual, var->yres_virtual); -+ -+ var->height = -1; -+ var->width = -1; -+ var->grayscale = 0; -+ -+ if (display && display->check_timings) { -+ struct omap_video_timings timings; -+ -+ if (var->pixclock == 0) { -+ DBG("Pixclock can't be zero.\n"); -+ return -EINVAL; -+ } -+ -+ timings.pixel_clock = PICOS2KHZ(var->pixclock); -+ timings.hfp = var->left_margin; -+ timings.hbp = var->right_margin; -+ timings.vfp = var->upper_margin; -+ timings.vbp = var->lower_margin; -+ timings.hsw = var->hsync_len; -+ timings.vsw = var->vsync_len; -+ -+ if (display->check_timings(display, &timings)) { -+ DBG("illegal video timings\n"); -+ return -EINVAL; -+ } -+ -+ /* pixclock in ps, the rest in pixclock */ -+ var->pixclock = KHZ2PICOS(timings.pixel_clock); -+ var->left_margin = timings.hfp; -+ var->right_margin = timings.hbp; -+ var->upper_margin = timings.vfp; -+ var->lower_margin = timings.vbp; -+ var->hsync_len = timings.hsw; -+ var->vsync_len = timings.vsw; -+ } -+ -+ /* TODO: get these from panel->config */ -+ var->vmode = FB_VMODE_NONINTERLACED; -+ var->sync = 0; -+ -+ return 0; -+} -+ -+/* -+ * --------------------------------------------------------------------------- -+ * fbdev framework callbacks -+ * --------------------------------------------------------------------------- -+ */ -+static int omapfb_open(struct fb_info *fbi, int user) -+{ -+ return 0; -+} -+ -+static int omapfb_release(struct fb_info *fbi, int user) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omap_display *display = fb2display(fbi); -+ -+ DBG("Closing fb with plane index %d\n", ofbi->id); -+ -+ omapfb_lock(fbdev); -+#if 1 -+ if (display) { -+ /* XXX Is this really needed ? */ -+ if (display->sync) -+ display->sync(display); -+ -+ if (display->update) -+ display->update(display, -+ 0, 0, -+ display->x_res, display->y_res); -+ } -+#endif -+ -+ if (display && display->sync) -+ display->sync(display); -+ -+ omapfb_unlock(fbdev); -+ -+ return 0; -+} -+ -+/* setup overlay according to the fb */ -+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, -+ int posx, int posy, int outw, int outh) -+{ -+ int r = 0; -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct fb_var_screeninfo *var = &fbi->var; -+ enum omap_color_mode mode = 0; -+ int offset; -+ u32 data_start_p; -+ void *data_start_v; -+ -+ DBG("setup_overlay %d\n", ofbi->id); -+ -+ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 && -+ (outw != var->xres || outh != var->yres)) { -+ r = -EINVAL; -+ goto err; -+ } -+ -+ offset = ((var->yoffset * var->xres_virtual + -+ var->xoffset) * var->bits_per_pixel) >> 3; -+ -+ data_start_p = ofbi->region.paddr + offset; -+ data_start_v = ofbi->region.vaddr + offset; -+ -+ mode = fb_mode_to_dss_mode(var); -+ -+ if (mode == -EINVAL) { -+ r = -EINVAL; -+ goto err; -+ } -+ -+ r = ovl->setup_input(ovl, -+ data_start_p, data_start_v, -+ var->xres_virtual, -+ var->xres, var->yres, -+ mode); -+ -+ if (r) -+ goto err; -+ -+ r = ovl->setup_output(ovl, -+ posx, posy, -+ outw, outh); -+ -+ if (r) -+ goto err; -+ -+ return 0; -+ -+err: -+ DBG("setup_overlay failed\n"); -+ return r; -+} -+ -+/* apply var to the overlay */ -+int omapfb_apply_changes(struct fb_info *fbi, int init) -+{ -+ int r = 0; -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct fb_var_screeninfo *var = &fbi->var; -+ /*struct omap_display *display = fb2display(fbi);*/ -+ struct omap_overlay *ovl; -+ int posx, posy; -+ int outw, outh; -+ int i; -+ -+ for (i = 0; i < ofbi->num_overlays; i++) { -+ ovl = ofbi->overlays[i]; -+ -+ DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); -+ -+ if (ofbi->region.size == 0) { -+ /* the fb is not available. disable the overlay */ -+ ovl->enable(ovl, 0); -+ if (!init && ovl->manager) -+ ovl->manager->apply(ovl->manager); -+ continue; -+ } -+ -+ if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { -+ outw = var->xres; -+ outh = var->yres; -+ } else { -+ outw = ovl->info.out_width; -+ outh = ovl->info.out_height; -+ } -+ -+ if (init) { -+ posx = 0; -+ posy = 0; -+ } else { -+ posx = ovl->info.pos_x; -+ posy = ovl->info.pos_y; -+ } -+ -+ r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh); -+ if (r) -+ goto err; -+ -+ /* disabled for now. if the display has changed, var -+ * still contains the old timings. */ -+#if 0 -+ if (display && display->set_timings) { -+ struct omap_video_timings timings; -+ timings.pixel_clock = PICOS2KHZ(var->pixclock); -+ timings.hfp = var->left_margin; -+ timings.hbp = var->right_margin; -+ timings.vfp = var->upper_margin; -+ timings.vbp = var->lower_margin; -+ timings.hsw = var->hsync_len; -+ timings.vsw = var->vsync_len; -+ -+ display->set_timings(display, &timings); -+ } -+#endif -+ if (!init && ovl->manager) -+ ovl->manager->apply(ovl->manager); -+ } -+ return 0; -+err: -+ DBG("apply_changes failed\n"); -+ return r; -+} -+ -+/* checks var and eventually tweaks it to something supported, -+ * DO NOT MODIFY PAR */ -+static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) -+{ -+ int r; -+ -+ DBG("check_var(%d)\n", FB2OFB(fbi)->id); -+ -+ r = check_fb_var(fbi, var); -+ -+ return r; -+} -+ -+/* set the video mode according to info->var */ -+static int omapfb_set_par(struct fb_info *fbi) -+{ -+ int r; -+ -+ DBG("set_par(%d)\n", FB2OFB(fbi)->id); -+ -+ set_fb_fix(fbi); -+ r = omapfb_apply_changes(fbi, 0); -+ -+ return r; -+} -+ -+static void omapfb_rotate(struct fb_info *fbi, int rotate) -+{ -+ DBG("rotate(%d)\n", FB2OFB(fbi)->id); -+ return; -+} -+ -+static int omapfb_pan_display(struct fb_var_screeninfo *var, -+ struct fb_info *fbi) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ int r = 0; -+ -+ DBG("pan_display(%d)\n", ofbi->id); -+ -+ omapfb_lock(fbdev); -+ -+ if (var->xoffset != fbi->var.xoffset || -+ var->yoffset != fbi->var.yoffset) { -+ struct fb_var_screeninfo new_var; -+ -+ new_var = fbi->var; -+ new_var.xoffset = var->xoffset; -+ new_var.yoffset = var->yoffset; -+ -+ r = check_fb_var(fbi, &new_var); -+ -+ if (r == 0) { -+ fbi->var = new_var; -+ set_fb_fix(fbi); -+ r = omapfb_apply_changes(fbi, 0); -+ } -+ } -+ -+ omapfb_unlock(fbdev); -+ -+ return r; -+} -+ -+static void mmap_user_open(struct vm_area_struct *vma) -+{ -+ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; -+ -+ atomic_inc(&ofbi->map_count); -+} -+ -+static void mmap_user_close(struct vm_area_struct *vma) -+{ -+ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; -+ -+ atomic_dec(&ofbi->map_count); -+} -+ -+static struct vm_operations_struct mmap_user_ops = { -+ .open = mmap_user_open, -+ .close = mmap_user_close, -+}; -+ -+static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb_mem_region *rg = &ofbi->region; -+ unsigned long off; -+ unsigned long start; -+ u32 len; -+ -+ if (vma->vm_end - vma->vm_start == 0) -+ return 0; -+ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) -+ return -EINVAL; -+ off = vma->vm_pgoff << PAGE_SHIFT; -+ -+ start = rg->paddr; -+ len = rg->size; -+ if (off >= len) -+ return -EINVAL; -+ if ((vma->vm_end - vma->vm_start + off) > len) -+ return -EINVAL; -+ off += start; -+ vma->vm_pgoff = off >> PAGE_SHIFT; -+ vma->vm_flags |= VM_IO | VM_RESERVED; -+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -+ vma->vm_ops = &mmap_user_ops; -+ vma->vm_private_data = ofbi; -+ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, -+ vma->vm_end - vma->vm_start, vma->vm_page_prot)) -+ return -EAGAIN; -+ /* vm_ops.open won't be called for mmap itself. */ -+ atomic_inc(&ofbi->map_count); -+ return 0; -+} -+ -+/* Store a single color palette entry into a pseudo palette or the hardware -+ * palette if one is available. For now we support only 16bpp and thus store -+ * the entry only to the pseudo palette. -+ */ -+static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, -+ u_int blue, u_int transp, int update_hw_pal) -+{ -+ /*struct omapfb_info *ofbi = FB2OFB(fbi);*/ -+ /*struct omapfb2_device *fbdev = ofbi->fbdev;*/ -+ struct fb_var_screeninfo *var = &fbi->var; -+ int r = 0; -+ -+ enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */ -+ -+ /*switch (plane->color_mode) {*/ -+ switch (mode) { -+ case OMAPFB_COLOR_YUV422: -+ case OMAPFB_COLOR_YUV420: -+ case OMAPFB_COLOR_YUY422: -+ r = -EINVAL; -+ break; -+ case OMAPFB_COLOR_CLUT_8BPP: -+ case OMAPFB_COLOR_CLUT_4BPP: -+ case OMAPFB_COLOR_CLUT_2BPP: -+ case OMAPFB_COLOR_CLUT_1BPP: -+ /* -+ if (fbdev->ctrl->setcolreg) -+ r = fbdev->ctrl->setcolreg(regno, red, green, blue, -+ transp, update_hw_pal); -+ */ -+ /* Fallthrough */ -+ r = -EINVAL; -+ break; -+ case OMAPFB_COLOR_RGB565: -+ case OMAPFB_COLOR_RGB444: -+ case OMAPFB_COLOR_RGB24P: -+ case OMAPFB_COLOR_RGB24U: -+ if (r != 0) -+ break; -+ -+ if (regno < 0) { -+ r = -EINVAL; -+ break; -+ } -+ -+ if (regno < 16) { -+ u16 pal; -+ pal = ((red >> (16 - var->red.length)) << -+ var->red.offset) | -+ ((green >> (16 - var->green.length)) << -+ var->green.offset) | -+ (blue >> (16 - var->blue.length)); -+ ((u32 *)(fbi->pseudo_palette))[regno] = pal; -+ } -+ break; -+ default: -+ BUG(); -+ } -+ return r; -+} -+ -+static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, -+ u_int transp, struct fb_info *info) -+{ -+ DBG("setcolreg\n"); -+ -+ return _setcolreg(info, regno, red, green, blue, transp, 1); -+} -+ -+static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) -+{ -+ int count, index, r; -+ u16 *red, *green, *blue, *transp; -+ u16 trans = 0xffff; -+ -+ DBG("setcmap\n"); -+ -+ red = cmap->red; -+ green = cmap->green; -+ blue = cmap->blue; -+ transp = cmap->transp; -+ index = cmap->start; -+ -+ for (count = 0; count < cmap->len; count++) { -+ if (transp) -+ trans = *transp++; -+ r = _setcolreg(info, index++, *red++, *green++, *blue++, trans, -+ count == cmap->len - 1); -+ if (r != 0) -+ return r; -+ } -+ -+ return 0; -+} -+ -+static int omapfb_blank(int blank, struct fb_info *fbi) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ struct omap_display *display = fb2display(fbi); -+ int do_update = 0; -+ int r = 0; -+ -+ omapfb_lock(fbdev); -+ -+ switch (blank) { -+ case FB_BLANK_UNBLANK: -+ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) { -+ r = -EINVAL; -+ goto exit; -+ } -+ -+ if (display->resume) -+ r = display->resume(display); -+ -+ if (r == 0 && display->get_update_mode && -+ display->get_update_mode(display) == -+ OMAP_DSS_UPDATE_MANUAL) -+ do_update = 1; -+ -+ break; -+ -+ case FB_BLANK_POWERDOWN: -+ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) { -+ r = -EINVAL; -+ goto exit; -+ } -+ -+ if (display->suspend) -+ r = display->suspend(display); -+ -+ break; -+ -+ default: -+ r = -EINVAL; -+ } -+ -+exit: -+ omapfb_unlock(fbdev); -+ -+ if (r == 0 && do_update && display->update) -+ r = display->update(display, -+ 0, 0, -+ display->x_res, display->y_res); -+ -+ return r; -+} -+ -+static struct fb_ops omapfb_ops = { -+ .owner = THIS_MODULE, -+ .fb_open = omapfb_open, -+ .fb_release = omapfb_release, -+ .fb_fillrect = cfb_fillrect, -+ .fb_copyarea = cfb_copyarea, -+ .fb_imageblit = cfb_imageblit, -+ .fb_blank = omapfb_blank, -+ .fb_ioctl = omapfb_ioctl, -+ .fb_check_var = omapfb_check_var, -+ .fb_set_par = omapfb_set_par, -+ .fb_rotate = omapfb_rotate, -+ .fb_pan_display = omapfb_pan_display, -+ .fb_mmap = omapfb_mmap, -+ .fb_setcolreg = omapfb_setcolreg, -+ .fb_setcmap = omapfb_setcmap, -+}; -+ -+static void omapfb_free_fbmem(struct omapfb2_device *fbdev, int fbnum) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[fbnum]); -+ struct omapfb_mem_region *rg; -+ -+ rg = &ofbi->region; -+ -+ if (rg->paddr) -+ if (omap_vram_free(rg->paddr, rg->vaddr, rg->size)) -+ printk("VRAM FREE failed\n"); -+ -+ rg->vaddr = NULL; -+ rg->paddr = 0; -+ rg->alloc = 0; -+ rg->size = 0; -+} -+ -+static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev) -+{ -+ int i; -+ -+ DBG("free all fbmem\n"); -+ -+ for (i = 0; i < fbdev->num_fbs; i++) -+ omapfb_free_fbmem(fbdev, i); -+ -+ return 0; -+} -+ -+static int omapfb_alloc_fbmem(struct omapfb2_device *fbdev, int fbnum, -+ unsigned long size) -+{ -+ struct omapfb_info *ofbi; -+ struct omapfb_mem_region *rg; -+ unsigned long paddr; -+ void *vaddr; -+ -+ ofbi = FB2OFB(fbdev->fbs[fbnum]); -+ rg = &ofbi->region; -+ memset(rg, 0, sizeof(*rg)); -+ -+ DBG("allocating %lu bytes for fb %d\n", -+ size, ofbi->id); -+ -+ vaddr = omap_vram_alloc(OMAPFB_MEMTYPE_SDRAM, size, &paddr); -+ DBG("VRAM ALLOCCI paddr %lx, vaddr %p\n", paddr, vaddr); -+ -+ if (vaddr == NULL) { -+ dev_err(fbdev->dev, -+ "failed to allocate framebuffer\n"); -+ return -ENOMEM; -+ } -+ -+ rg->paddr = paddr; -+ rg->vaddr = vaddr; -+ rg->size = size; -+ rg->alloc = 1; -+ -+ return 0; -+} -+ -+int omapfb_realloc_fbmem(struct omapfb2_device *fbdev, int fbnum, -+ unsigned long size) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[fbnum]); -+ struct omapfb_mem_region *rg = &ofbi->region; -+ unsigned old_size = rg->size; -+ int r; -+ -+ omapfb_free_fbmem(fbdev, fbnum); -+ -+ if (size == 0) -+ return 0; -+ -+ r = omapfb_alloc_fbmem(fbdev, fbnum, size); -+ -+ if (r) -+ omapfb_alloc_fbmem(fbdev, fbnum, old_size); -+ -+ return r; -+} -+ -+/* allocate fbmem using display resolution as reference */ -+static int omapfb_alloc_fbmem_display(struct omapfb2_device *fbdev, int fbnum) -+{ -+ struct omapfb_info *ofbi; -+ struct omap_display *display; -+ int bytespp; -+ unsigned long size; -+ -+ ofbi = FB2OFB(fbdev->fbs[fbnum]); -+ display = fb2display(fbdev->fbs[fbnum]); -+ -+ if (!display) -+ return 0; -+ -+ switch (display->bpp) { -+ case 16: -+ bytespp = 2; -+ break; -+ case 24: -+ case 32: -+ bytespp = 4; -+ break; -+ default: -+ bytespp = 4; -+ break; -+ } -+ -+ size = display->x_res * display->y_res * bytespp; -+ -+ return omapfb_alloc_fbmem(fbdev, fbnum, size); -+} -+ -+static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) -+{ -+ int i, r; -+ -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ r = omapfb_alloc_fbmem_display(fbdev, i); -+ -+ if (r) -+ return r; -+ } -+ -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); -+ struct omapfb_mem_region *rg; -+ rg = &ofbi->region; -+ -+ DBG("region%d phys %08x virt %p size=%lu\n", -+ i, -+ rg->paddr, -+ rg->vaddr, -+ rg->size); -+ } -+ -+ return 0; -+} -+ -+/* initialize fb_info, var, fix to something sane based on the display */ -+static int fbinfo_init(struct omapfb2_device *fbdev, struct fb_info *fbi) -+{ -+ struct fb_var_screeninfo *var = &fbi->var; -+ struct fb_fix_screeninfo *fix = &fbi->fix; -+ struct omap_display *display = fb2display(fbi); -+ int r = 0; -+ -+ fbi->fbops = &omapfb_ops; -+ fbi->flags = FBINFO_FLAG_DEFAULT; -+ fbi->pseudo_palette = fbdev->pseudo_palette; -+ -+ strncpy(fix->id, MODULE_NAME, sizeof(fix->id)); -+ -+ var->nonstd = 0; -+ -+ if (display) { -+ var->xres = display->x_res; -+ var->yres = display->y_res; -+ var->xres_virtual = var->xres; -+ var->yres_virtual = var->yres; -+ /* var->rotate = def_rotate; */ -+ -+ switch (display->bpp) { -+ case 16: -+ var->bits_per_pixel = 16; -+ break; -+ case 18: -+ var->bits_per_pixel = 16; -+ break; -+ case 24: -+ var->bits_per_pixel = 32; -+ break; -+ default: -+ dev_err(fbdev->dev, "illegal display bpp\n"); -+ return -EINVAL; -+ } -+ -+ if (display->get_timings) { -+ struct omap_video_timings timings; -+ display->get_timings(display, &timings); -+ -+ /* pixclock in ps, the rest in pixclock */ -+ var->pixclock = KHZ2PICOS(timings.pixel_clock); -+ var->left_margin = timings.hfp; -+ var->right_margin = timings.hbp; -+ var->upper_margin = timings.vfp; -+ var->lower_margin = timings.vbp; -+ var->hsync_len = timings.hsw; -+ var->vsync_len = timings.vsw; -+ } else { -+ var->pixclock = 0; -+ var->left_margin = 0; -+ var->right_margin = 0; -+ var->upper_margin = 0; -+ var->lower_margin = 0; -+ var->hsync_len = 0; -+ var->vsync_len = 0; -+ } -+ } -+ -+ r = check_fb_var(fbi, var); -+ if (r) -+ goto err; -+ -+ set_fb_fix(fbi); -+ -+#ifdef DEBUG -+ fill_fb(FB2OFB(fbi)->region.vaddr, fbi); -+#endif -+err: -+ return r; -+} -+ -+static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi) -+{ -+ fb_dealloc_cmap(&fbi->cmap); -+} -+ -+ -+static void omapfb_free_resources(struct omapfb2_device *fbdev) -+{ -+ int i; -+ -+ DBG("free_resources\n"); -+ -+ if (fbdev == NULL) -+ return; -+ -+ for (i = 0; i < fbdev->num_fbs; i++) -+ unregister_framebuffer(fbdev->fbs[i]); -+ -+ /* free the reserved fbmem */ -+ omapfb_free_all_fbmem(fbdev); -+ -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ fbinfo_cleanup(fbdev, fbdev->fbs[i]); -+ framebuffer_release(fbdev->fbs[i]); -+ } -+ -+ for (i = 0; i < fbdev->num_displays; i++) { -+ if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED) -+ fbdev->displays[i]->disable(fbdev->displays[i]); -+ -+ omap_dss_put_display(fbdev->displays[i]); -+ } -+ -+ dev_set_drvdata(fbdev->dev, NULL); -+ kfree(fbdev); -+} -+ -+static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) -+{ -+ int r, i; -+ -+ fbdev->num_fbs = 0; -+ -+ DBG("create %d framebuffers\n", CONFIG_FB_OMAP2_NUM_FBS); -+ -+ /* allocate fb_infos */ -+ for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) { -+ struct fb_info *fbi; -+ struct omapfb_info *ofbi; -+ -+ fbi = framebuffer_alloc(sizeof(struct omapfb_info), -+ fbdev->dev); -+ -+ if (fbi == NULL) { -+ dev_err(fbdev->dev, -+ "unable to allocate memory for plane info\n"); -+ return -ENOMEM; -+ } -+ -+ fbdev->fbs[i] = fbi; -+ -+ ofbi = FB2OFB(fbi); -+ ofbi->fbdev = fbdev; -+ ofbi->id = i; -+ fbdev->num_fbs++; -+ } -+ -+ DBG("fb_infos allocated\n"); -+ -+ /* assign overlays for the fbs */ -+ for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) { -+ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); -+ -+ ofbi->overlays[0] = fbdev->overlays[i]; -+ ofbi->num_overlays = 1; -+ } -+ -+ /* allocate fb memories */ -+ r = omapfb_allocate_all_fbs(fbdev); -+ if (r) { -+ dev_err(fbdev->dev, "failed to allocate fbmem\n"); -+ return r; -+ } -+ -+ DBG("fbmems allocated\n"); -+ -+ /* setup fb_infos */ -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ r = fbinfo_init(fbdev, fbdev->fbs[i]); -+ if (r) { -+ dev_err(fbdev->dev, "failed to setup fb_info\n"); -+ return r; -+ } -+ } -+ -+ DBG("fb_infos initialized\n"); -+ -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ r = register_framebuffer(fbdev->fbs[i]); -+ if (r != 0) { -+ dev_err(fbdev->dev, -+ "registering framebuffer %d failed\n", i); -+ return r; -+ } -+ } -+ -+ DBG("framebuffers registered\n"); -+ -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ r = omapfb_apply_changes(fbdev->fbs[i], 1); -+ if (r) -+ dev_err(fbdev->dev, "failed to change mode\n"); -+ } -+ -+ /* Enable the first framebuffer that has overlay that is connected -+ * to display. Usually this would be the GFX plane. */ -+ r = 0; -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); -+ int t; -+ -+ for (t = 0; t < ofbi->num_overlays; t++) { -+ struct omap_overlay *ovl = ofbi->overlays[t]; -+ if (ovl->manager && ovl->manager->display) { -+ ovl->enable(ovl, 1); -+ r = 1; -+ break; -+ } -+ } -+ -+ if (r) -+ break; -+ } -+ -+ DBG("create_framebuffers done\n"); -+ -+ return 0; -+} -+ -+static int omapfb_probe(struct platform_device *pdev) -+{ -+ struct omapfb2_device *fbdev = NULL; -+ int r = 0; -+ int i, t; -+ struct omap_overlay *ovl; -+ struct omap_display *def_display; -+ -+ DBG("omapfb_probe\n"); -+ -+ if (pdev->num_resources != 0) { -+ dev_err(&pdev->dev, "probed for an unknown device\n"); -+ r = -ENODEV; -+ goto err0; -+ } -+ -+ if (pdev->dev.platform_data == NULL) { -+ dev_err(&pdev->dev, "missing platform data\n"); -+ r = -ENOENT; -+ goto err0; -+ } -+ -+ fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL); -+ if (fbdev == NULL) { -+ r = -ENOMEM; -+ goto err0; -+ } -+ -+ mutex_init(&fbdev->mtx); -+ -+ fbdev->dev = &pdev->dev; -+ platform_set_drvdata(pdev, fbdev); -+ -+ fbdev->num_displays = 0; -+ t = omap_dss_get_num_displays(); -+ for (i = 0; i < t; i++) { -+ struct omap_display *display; -+ display = omap_dss_get_display(i); -+ if (!display) { -+ dev_err(&pdev->dev, "can't get display %d\n", i); -+ r = -EINVAL; -+ goto cleanup; -+ } -+ -+ fbdev->displays[fbdev->num_displays++] = display; -+ } -+ -+ if (fbdev->num_displays == 0) { -+ dev_err(&pdev->dev, "no displays\n"); -+ r = -EINVAL; -+ goto cleanup; -+ } -+ -+ fbdev->num_overlays = omap_dss_get_num_overlays(); -+ for (i = 0; i < fbdev->num_overlays; i++) -+ fbdev->overlays[i] = omap_dss_get_overlay(i); -+ -+ fbdev->num_managers = omap_dss_get_num_overlay_managers(); -+ for (i = 0; i < fbdev->num_managers; i++) -+ fbdev->managers[i] = omap_dss_get_overlay_manager(i); -+ -+ -+ /* gfx overlay should be the default one. find a display -+ * connected to that, and use it as default display */ -+ ovl = omap_dss_get_overlay(0); -+ if (ovl->manager && ovl->manager->display) { -+ def_display = ovl->manager->display; -+ } else { -+ dev_err(&pdev->dev, "cannot find default display\n"); -+ r = -EINVAL; -+ goto cleanup; -+ } -+ -+ r = omapfb_create_framebuffers(fbdev); -+ if (r) -+ goto cleanup; -+ -+ for (i = 0; i < fbdev->num_managers; i++) { -+ struct omap_overlay_manager *mgr; -+ mgr = fbdev->managers[i]; -+ r = mgr->apply(mgr); -+ if (r) { -+ dev_err(fbdev->dev, "failed to apply dispc config\n"); -+ goto cleanup; -+ } -+ } -+ -+ DBG("mgr->apply'ed\n"); -+ -+ r = def_display->enable(def_display); -+ if (r) { -+ dev_err(fbdev->dev, "Failed to enable display '%s'\n", -+ def_display->name); -+ goto cleanup; -+ } -+ -+ /* set the update mode */ -+ if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { -+#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE -+ if (def_display->set_update_mode) -+ def_display->set_update_mode(def_display, -+ OMAP_DSS_UPDATE_AUTO); -+ if (def_display->enable_te) -+ def_display->enable_te(def_display, 1); -+#else -+ if (def_display->set_update_mode) -+ def_display->set_update_mode(def_display, -+ OMAP_DSS_UPDATE_MANUAL); -+ if (def_display->enable_te) -+ def_display->enable_te(def_display, 0); -+#endif -+ } else { -+ if (def_display->set_update_mode) -+ def_display->set_update_mode(def_display, -+ OMAP_DSS_UPDATE_AUTO); -+ } -+ -+ for (i = 0; i < fbdev->num_displays; i++) { -+ struct omap_display *display = fbdev->displays[i]; -+ -+ if (display->update) -+ display->update(display, -+ 0, 0, -+ display->x_res, display->y_res); -+ } -+ -+ DBG("display->updated\n"); -+ -+ omapfb_create_sysfs(fbdev); -+ DBG("sysfs created\n"); -+ -+ return 0; -+ -+cleanup: -+ omapfb_free_resources(fbdev); -+err0: -+ dev_err(&pdev->dev, "failed to setup omapfb\n"); -+ return r; -+} -+ -+static int omapfb_remove(struct platform_device *pdev) -+{ -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ -+ /* FIXME: wait till completion of pending events */ -+ -+ omapfb_remove_sysfs(fbdev); -+ -+ omapfb_free_resources(fbdev); -+ -+ return 0; -+} -+ -+static struct platform_driver omapfb_driver = { -+ .probe = omapfb_probe, -+ .remove = omapfb_remove, -+ .driver = { -+ .name = "omapfb", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init omapfb_init(void) -+{ -+ DBG("omapfb_init\n"); -+ -+ if (platform_driver_register(&omapfb_driver)) { -+ printk(KERN_ERR "failed to register omapfb driver\n"); -+ return -ENODEV; -+ } -+ -+ return 0; -+} -+ -+static void __exit omapfb_exit(void) -+{ -+ DBG("omapfb_exit\n"); -+ platform_driver_unregister(&omapfb_driver); -+} -+ -+/* late_initcall to let panel/ctrl drivers loaded first. -+ * I guess better option would be a more dynamic approach, -+ * so that omapfb reacts to new panels when they are loaded */ -+late_initcall(omapfb_init); -+/*module_init(omapfb_init);*/ -+module_exit(omapfb_exit); -+ -+MODULE_AUTHOR("Tomi Valkeinen "); -+MODULE_DESCRIPTION("OMAP2/3 Framebuffer"); -+MODULE_LICENSE("GPL v2"); -diff --git a/drivers/video/omap2/omapfb-sysfs.c b/drivers/video/omap2/omapfb-sysfs.c -new file mode 100644 -index 0000000..59b48ac ---- /dev/null -+++ b/drivers/video/omap2/omapfb-sysfs.c -@@ -0,0 +1,838 @@ -+/* -+ * linux/drivers/video/omap2/omapfb-sysfs.c -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "omapfb.h" -+ -+static int omapfb_attach_framebuffer(struct fb_info *fbi, -+ struct omap_overlay *ovl) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ int i, t; -+ int r; -+ -+ if (ofbi->num_overlays >= OMAPFB_MAX_OVL_PER_FB) { -+ dev_err(fbdev->dev, "fb has max number of overlays already\n"); -+ return -EINVAL; -+ } -+ -+ for (i = 0; i < ofbi->num_overlays; i++) { -+ if (ofbi->overlays[i] == ovl) { -+ dev_err(fbdev->dev, "fb already attached to overlay\n"); -+ return -EINVAL; -+ } -+ } -+ -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]); -+ for (t = 0; t < ofbi2->num_overlays; t++) { -+ if (ofbi2->overlays[t] == ovl) { -+ dev_err(fbdev->dev, "overlay already in use\n"); -+ return -EINVAL; -+ } -+ } -+ } -+ -+ ofbi->overlays[ofbi->num_overlays++] = ovl; -+ -+/* -+ if (ovl->manager && ovl->manager->display) -+ omapfb_adjust_fb(fbi, ovl, 0, 0); -+*/ -+ r = omapfb_apply_changes(fbi, 1); -+ if (r) -+ return r; -+ -+ if (ovl->manager) -+ ovl->manager->apply(ovl->manager); -+ -+ return 0; -+} -+ -+static int omapfb_detach_framebuffer(struct fb_info *fbi, -+ struct omap_overlay *ovl) -+{ -+ int i; -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ struct omapfb2_device *fbdev = ofbi->fbdev; -+ -+ for (i = 0; i < ofbi->num_overlays; i++) { -+ if (ofbi->overlays[i] == ovl) -+ break; -+ } -+ -+ if (i == ofbi->num_overlays) { -+ dev_err(fbdev->dev, "cannot detach fb, overlay not attached\n"); -+ return -EINVAL; -+ } -+ -+ ovl->enable(ovl, 0); -+ -+ if (ovl->manager) -+ ovl->manager->apply(ovl->manager); -+ -+ for (i = i + 1; i < ofbi->num_overlays; i++) -+ ofbi->overlays[i-1] = ofbi->overlays[i]; -+ -+ ofbi->num_overlays--; -+ -+ return 0; -+} -+ -+ -+static ssize_t show_framebuffers(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ ssize_t l = 0, size = PAGE_SIZE; -+ int i, t; -+ -+ omapfb_lock(fbdev); -+ -+ for (i = 0; i < fbdev->num_fbs; i++) { -+ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); -+ struct omapfb_mem_region *rg; -+ -+ rg = &ofbi->region; -+ -+ l += snprintf(buf + l, size - l, "%d p:%08x v:%p size:%lu t:", -+ ofbi->id, -+ rg->paddr, rg->vaddr, rg->size); -+ -+ if (ofbi->num_overlays == 0) -+ l += snprintf(buf + l, size - l, "none"); -+ -+ for (t = 0; t < ofbi->num_overlays; t++) { -+ struct omap_overlay *ovl; -+ ovl = ofbi->overlays[t]; -+ -+ l += snprintf(buf + l, size - l, "%s%s", -+ t == 0 ? "" : ",", -+ ovl->name); -+ } -+ -+ l += snprintf(buf + l, size - l, "\n"); -+ } -+ -+ omapfb_unlock(fbdev); -+ -+ return l; -+} -+ -+static struct omap_overlay *find_overlay_by_name(struct omapfb2_device *fbdev, -+ char *name) -+{ -+ int i; -+ -+ for (i = 0; i < fbdev->num_overlays; i++) -+ if (strcmp(name, fbdev->overlays[i]->name) == 0) -+ return fbdev->overlays[i]; -+ -+ return NULL; -+} -+ -+static struct omap_display *find_display_by_name(struct omapfb2_device *fbdev, -+ char *name) -+{ -+ int i; -+ -+ for (i = 0; i < fbdev->num_displays; i++) -+ if (strcmp(name, fbdev->displays[i]->name) == 0) -+ return fbdev->displays[i]; -+ -+ return NULL; -+} -+ -+static struct omap_overlay_manager *find_manager_by_name( -+ struct omapfb2_device *fbdev, -+ char *name) -+{ -+ int i; -+ -+ for (i = 0; i < fbdev->num_managers; i++) -+ if (strcmp(name, fbdev->managers[i]->name) == 0) -+ return fbdev->managers[i]; -+ -+ return NULL; -+} -+ -+static int parse_overlays(struct omapfb2_device *fbdev, char *str, -+ struct omap_overlay *ovls[]) -+{ -+ int num_ovls = 0; -+ int s, e = 0; -+ char ovlname[10]; -+ -+ while (1) { -+ struct omap_overlay *ovl; -+ -+ s = e; -+ -+ while (e < strlen(str) && str[e] != ',') -+ e++; -+ -+ strncpy(ovlname, str + s, e - s); -+ ovlname[e-s] = 0; -+ -+ DBG("searching for '%s'\n", ovlname); -+ ovl = find_overlay_by_name(fbdev, ovlname); -+ -+ if (ovl) { -+ DBG("found an overlay\n"); -+ ovls[num_ovls] = ovl; -+ num_ovls++; -+ } else { -+ DBG("unknown overlay %s\n", str); -+ return 0; -+ } -+ -+ if (e == strlen(str)) -+ break; -+ -+ e++; -+ } -+ -+ return num_ovls; -+} -+ -+static ssize_t store_framebuffers(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ int idx; -+ char fbname[3]; -+ unsigned long fbnum; -+ char ovlnames[40]; -+ int num_ovls = 0; -+ struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB]; -+ struct fb_info *fbi; -+ struct omapfb_info *ofbi; -+ int r, i; -+ -+ idx = 0; -+ while (idx < count && buf[idx] != ' ') -+ ++idx; -+ -+ if (idx == count) -+ return -EINVAL; -+ -+ if (idx >= sizeof(fbname)) -+ return -EINVAL; -+ -+ strncpy(fbname, buf, idx); -+ fbname[idx] = 0; -+ idx++; -+ -+ if (strict_strtoul(fbname, 10, &fbnum)) -+ return -EINVAL; -+ -+ r = sscanf(buf + idx, "t:%39s", ovlnames); -+ -+ if (r != 1) { -+ r = -EINVAL; -+ goto err; -+ } -+ -+ omapfb_lock(fbdev); -+ -+ if (fbnum >= fbdev->num_fbs) { -+ dev_err(dev, "fb not found\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ -+ fbi = fbdev->fbs[fbnum]; -+ ofbi = FB2OFB(fbi); -+ -+ if (strcmp(ovlnames, "none") == 0) { -+ num_ovls = 0; -+ } else { -+ num_ovls = parse_overlays(fbdev, ovlnames, ovls); -+ -+ if (num_ovls == 0) { -+ dev_err(dev, "overlays not found\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ } -+ -+ for (i = 0; i < ofbi->num_overlays; i++) { -+ r = omapfb_detach_framebuffer(fbi, ofbi->overlays[i]); -+ if (r) { -+ dev_err(dev, "detach failed\n"); -+ goto err; -+ } -+ } -+ -+ if (num_ovls > 0) { -+ for (i = 0; i < num_ovls; i++) { -+ r = omapfb_attach_framebuffer(fbi, ovls[i]); -+ if (r) { -+ dev_err(dev, "attach failed\n"); -+ goto err; -+ } -+ } -+ } -+ -+ omapfb_unlock(fbdev); -+ return count; -+ -+err: -+ omapfb_unlock(fbdev); -+ return r; -+} -+ -+static ssize_t show_overlays(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ ssize_t l = 0, size = PAGE_SIZE; -+ int i, mgr_num; -+ -+ omapfb_lock(fbdev); -+ -+ for (i = 0; i < fbdev->num_overlays; i++) { -+ struct omap_overlay *ovl; -+ struct omap_overlay_manager *mgr; -+ -+ ovl = fbdev->overlays[i]; -+ mgr = ovl->manager; -+ -+ for (mgr_num = 0; mgr_num < fbdev->num_managers; mgr_num++) -+ if (fbdev->managers[mgr_num] == mgr) -+ break; -+ -+ l += snprintf(buf + l, size - l, -+ "%s t:%s x:%d y:%d iw:%d ih:%d w: %d h: %d e:%d\n", -+ ovl->name, -+ mgr ? mgr->name : "none", -+ ovl->info.pos_x, -+ ovl->info.pos_y, -+ ovl->info.width, -+ ovl->info.height, -+ ovl->info.out_width, -+ ovl->info.out_height, -+ ovl->info.enabled); -+ } -+ -+ omapfb_unlock(fbdev); -+ -+ return l; -+} -+ -+static ssize_t store_overlays(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ int idx; -+ struct omap_overlay *ovl = NULL; -+ struct omap_overlay_manager *mgr; -+ int r; -+ char ovlname[10]; -+ int posx, posy, outw, outh; -+ int enabled; -+ -+ idx = 0; -+ while (idx < count && buf[idx] != ' ') -+ ++idx; -+ -+ if (idx == count) -+ return -EINVAL; -+ -+ if (idx >= sizeof(ovlname)) -+ return -EINVAL; -+ -+ strncpy(ovlname, buf, idx); -+ ovlname[idx] = 0; -+ idx++; -+ -+ omapfb_lock(fbdev); -+ -+ ovl = find_overlay_by_name(fbdev, ovlname); -+ -+ if (!ovl) { -+ dev_err(dev, "ovl not found\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ -+ DBG("ovl %s found\n", ovl->name); -+ -+ mgr = ovl->manager; -+ -+ posx = ovl->info.pos_x; -+ posy = ovl->info.pos_y; -+ outw = ovl->info.out_width; -+ outh = ovl->info.out_height; -+ enabled = ovl->info.enabled; -+ -+ while (idx < count) { -+ char c; -+ int val; -+ int len; -+ char sval[10]; -+ -+ r = sscanf(buf + idx, "%c:%d%n", &c, &val, &len); -+ -+ if (r != 2) { -+ val = 0; -+ -+ r = sscanf(buf + idx, "%c:%9s%n", &c, sval, &len); -+ -+ if (r != 2) { -+ dev_err(dev, "sscanf failed, aborting\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ } else { -+ sval[0] = 0; -+ } -+ -+ switch (c) { -+ case 't': -+ if (strcmp(sval, "none") == 0) { -+ mgr = NULL; -+ } else { -+ mgr = find_manager_by_name(fbdev, sval); -+ -+ if (mgr == NULL) { -+ dev_err(dev, "no such manager\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ -+ DBG("manager %s found\n", mgr->name); -+ } -+ -+ break; -+ -+ case 'x': -+ posx = val; -+ break; -+ -+ case 'y': -+ posy = val; -+ break; -+ -+ case 'w': -+ if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) -+ outw = val; -+ break; -+ -+ case 'h': -+ if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) -+ outh = val; -+ break; -+ -+ case 'e': -+ enabled = val; -+ break; -+ -+ default: -+ dev_err(dev, "unknown option %c\n", c); -+ r = -EINVAL; -+ goto err; -+ } -+ -+ idx += len + 1; -+ } -+ -+ r = ovl->setup_output(ovl, posx, posy, outw, outh); -+ -+ if (r) { -+ dev_err(dev, "setup overlay failed\n"); -+ goto err; -+ } -+ -+ if (mgr != ovl->manager) { -+ /* detach old manager */ -+ if (ovl->manager) { -+ r = ovl->unset_manager(ovl); -+ if (r) { -+ dev_err(dev, "detach failed\n"); -+ goto err; -+ } -+ } -+ -+ if (mgr) { -+ r = ovl->set_manager(ovl, mgr); -+ if (r) { -+ dev_err(dev, "Failed to attach overlay\n"); -+ goto err; -+ } -+ } -+ } -+ -+ r = ovl->enable(ovl, enabled); -+ -+ if (r) { -+ dev_err(dev, "enable overlay failed\n"); -+ goto err; -+ } -+ -+ if (mgr) { -+ r = mgr->apply(mgr); -+ if (r) { -+ dev_err(dev, "failed to apply dispc config\n"); -+ goto err; -+ } -+ } else { -+ ovl->enable(ovl, 0); -+ } -+ -+ if (mgr && mgr->display && mgr->display->update) -+ mgr->display->update(mgr->display, -+ 0, 0, -+ mgr->display->x_res, mgr->display->y_res); -+ -+ omapfb_unlock(fbdev); -+ return count; -+ -+err: -+ omapfb_unlock(fbdev); -+ return r; -+} -+ -+static ssize_t show_managers(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ ssize_t l = 0, size = PAGE_SIZE; -+ int i; -+ -+ omapfb_lock(fbdev); -+ -+ for (i = 0; i < fbdev->num_managers; i++) { -+ struct omap_display *display; -+ struct omap_overlay_manager *mgr; -+ -+ mgr = fbdev->managers[i]; -+ display = mgr->display; -+ -+ l += snprintf(buf + l, size - l, "%s t:%s\n", -+ mgr->name, display ? display->name : "none"); -+ } -+ -+ omapfb_unlock(fbdev); -+ -+ return l; -+} -+ -+static ssize_t store_managers(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ int idx; -+ struct omap_overlay_manager *mgr; -+ struct omap_display *display; -+ char mgrname[10]; -+ char displayname[10]; -+ int r; -+ -+ idx = 0; -+ while (idx < count && buf[idx] != ' ') -+ ++idx; -+ -+ if (idx == count) -+ return -EINVAL; -+ -+ if (idx >= sizeof(mgrname)) -+ return -EINVAL; -+ -+ strncpy(mgrname, buf, idx); -+ mgrname[idx] = 0; -+ idx++; -+ -+ omapfb_lock(fbdev); -+ -+ mgr = find_manager_by_name(fbdev, mgrname); -+ -+ if (!mgr) { -+ dev_err(dev, "manager not found\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ -+ r = sscanf(buf + idx, "t:%9s", displayname); -+ -+ if (r != 1) { -+ r = -EINVAL; -+ goto err; -+ } -+ -+ if (strcmp(displayname, "none") == 0) { -+ display = NULL; -+ } else { -+ display = find_display_by_name(fbdev, displayname); -+ -+ if (!display) { -+ dev_err(dev, "display not found\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ } -+ -+ if (mgr->display) { -+ r = mgr->unset_display(mgr); -+ if (r) { -+ dev_err(dev, "failed to unset display\n"); -+ goto err; -+ } -+ } -+ -+ if (display) { -+ r = mgr->set_display(mgr, display); -+ if (r) { -+ dev_err(dev, "failed to set manager\n"); -+ goto err; -+ } -+ -+ r = mgr->apply(mgr); -+ if (r) { -+ dev_err(dev, "failed to apply dispc config\n"); -+ goto err; -+ } -+ } -+ -+ omapfb_unlock(fbdev); -+ return count; -+ -+err: -+ omapfb_unlock(fbdev); -+ return r; -+} -+ -+static ssize_t show_displays(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ ssize_t l = 0, size = PAGE_SIZE; -+ int i; -+ -+ omapfb_lock(fbdev); -+ -+ for (i = 0; i < fbdev->num_displays; i++) { -+ struct omap_display *display; -+ enum omap_dss_update_mode mode = -1; -+ int te = 0; -+ -+ display = fbdev->displays[i]; -+ -+ if (display->get_update_mode) -+ mode = display->get_update_mode(display); -+ -+ if (display->get_te) -+ te = display->get_te(display); -+ -+ l += snprintf(buf + l, size - l, -+ "%s w:%d h:%d e:%d u:%d t:%d\n", -+ display->name, -+ display->x_res, -+ display->y_res, -+ display->state != OMAP_DSS_DISPLAY_DISABLED, -+ mode, te); -+ } -+ -+ omapfb_unlock(fbdev); -+ -+ return l; -+} -+ -+static ssize_t store_displays(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); -+ int idx; -+ int enable, width, height; -+ enum omap_dss_update_mode mode; -+ struct omap_display *display = NULL; -+ int r; -+ char displayname[10]; -+ int te; -+ -+ idx = 0; -+ while (idx < count && buf[idx] != ' ') -+ ++idx; -+ -+ if (idx == count) -+ return -EINVAL; -+ -+ if (idx >= sizeof(displayname)) -+ return -EINVAL; -+ -+ strncpy(displayname, buf, idx); -+ displayname[idx] = 0; -+ idx++; -+ -+ omapfb_lock(fbdev); -+ -+ display = find_display_by_name(fbdev, displayname); -+ -+ if (!display) { -+ dev_err(dev, "display not found\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ -+ width = display->x_res; -+ height = display->y_res; -+ enable = display->state != OMAP_DSS_DISPLAY_DISABLED; -+ if (display->get_update_mode) -+ mode = display->get_update_mode(display); -+ else -+ mode = 0; -+ -+ if (display->get_te) -+ te = display->get_te(display); -+ else -+ te = 0; -+ -+ while (idx < count) { -+ char c; -+ int val; -+ int len; -+ -+ r = sscanf(buf + idx, "%c:%d%n", &c, &val, &len); -+ -+ if (r != 2) { -+ dev_err(dev, "sscanf failed, aborting\n"); -+ r = -EINVAL; -+ goto err; -+ } -+ -+ switch (c) { -+ case 'w': -+ width = val; -+ break; -+ -+ case 'h': -+ height = val; -+ break; -+ -+ case 'e': -+ enable = val; -+ break; -+ -+ case 'u': -+ mode = val; -+ break; -+ -+ case 't': -+ te = val; -+ break; -+ -+ default: -+ dev_err(dev, "unknown option %c\n", c); -+ r = -EINVAL; -+ goto err; -+ } -+ -+ idx += len + 1; -+ } -+ -+ /* XXX: setmode */ -+ if (enable != (display->state != OMAP_DSS_DISPLAY_DISABLED)) { -+ if (enable) { -+ r = display->enable(display); -+ if (r) -+ dev_err(dev, "failed to enable display\n"); -+ } else { -+ display->disable(display); -+ } -+ } -+ -+ if (display->set_update_mode && display->get_update_mode) { -+ if (mode != display->get_update_mode(display)) -+ display->set_update_mode(display, mode); -+ } -+ -+ if (display->enable_te && display->get_te) { -+ if (te != display->get_te(display)) -+ display->enable_te(display, te); -+ } -+ -+ omapfb_unlock(fbdev); -+ return count; -+ -+err: -+ omapfb_unlock(fbdev); -+ return r; -+} -+ -+ -+static DEVICE_ATTR(framebuffers, S_IRUGO | S_IWUSR, -+ show_framebuffers, store_framebuffers); -+static DEVICE_ATTR(overlays, S_IRUGO | S_IWUSR, -+ show_overlays, store_overlays); -+static DEVICE_ATTR(managers, S_IRUGO | S_IWUSR, -+ show_managers, store_managers); -+static DEVICE_ATTR(displays, S_IRUGO | S_IWUSR, -+ show_displays, store_displays); -+ -+static struct attribute *omapfb_attrs[] = { -+ &dev_attr_framebuffers.attr, -+ &dev_attr_overlays.attr, -+ &dev_attr_managers.attr, -+ &dev_attr_displays.attr, -+ NULL, -+}; -+ -+static struct attribute_group omapfb_attr_group = { -+ .attrs = omapfb_attrs, -+}; -+ -+void omapfb_create_sysfs(struct omapfb2_device *fbdev) -+{ -+ int r; -+ -+ r = sysfs_create_group(&fbdev->dev->kobj, &omapfb_attr_group); -+ if (r) -+ dev_err(fbdev->dev, "failed to create sysfs clk file\n"); -+} -+ -+void omapfb_remove_sysfs(struct omapfb2_device *fbdev) -+{ -+ sysfs_remove_group(&fbdev->dev->kobj, &omapfb_attr_group); -+} -+ -diff --git a/drivers/video/omap2/omapfb.h b/drivers/video/omap2/omapfb.h -new file mode 100644 -index 0000000..60352da ---- /dev/null -+++ b/drivers/video/omap2/omapfb.h -@@ -0,0 +1,109 @@ -+/* -+ * linux/drivers/video/omap2/omapfb.h -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * Some code and ideas taken from drivers/video/omap/ driver -+ * by Imre Deak. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ -+#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ -+ -+#ifdef CONFIG_FB_OMAP2_DEBUG -+#define DEBUG -+#endif -+ -+#ifdef DEBUG -+#define DBG(format, ...) printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__) -+#else -+#define DBG(format, ...) -+#endif -+ -+#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par)) -+ -+/* max number of overlays to which a framebuffer data can be direct */ -+#define OMAPFB_MAX_OVL_PER_FB 3 -+ -+/* appended to fb_info */ -+struct omapfb_info { -+ int id; -+ struct omapfb_mem_region region; -+ atomic_t map_count; -+ int num_overlays; -+ struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; -+ struct omapfb2_device *fbdev; -+}; -+ -+struct omapfb2_device { -+ struct device *dev; -+ struct mutex mtx; -+ -+ u32 pseudo_palette[17]; -+ -+ int state; -+ -+ int num_fbs; -+ struct fb_info *fbs[10]; -+ -+ int num_displays; -+ struct omap_display *displays[10]; -+ int num_overlays; -+ struct omap_overlay *overlays[10]; -+ int num_managers; -+ struct omap_overlay_manager *managers[10]; -+}; -+ -+void set_fb_fix(struct fb_info *fbi); -+int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var); -+int omapfb_realloc_fbmem(struct omapfb2_device *fbdev, int fbnum, -+ unsigned long size); -+int omapfb_apply_changes(struct fb_info *fbi, int init); -+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, -+ int posx, int posy, int outw, int outh); -+ -+void omapfb_create_sysfs(struct omapfb2_device *fbdev); -+void omapfb_remove_sysfs(struct omapfb2_device *fbdev); -+ -+int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg); -+ -+/* find the display connected to this fb, if any */ -+static inline struct omap_display *fb2display(struct fb_info *fbi) -+{ -+ struct omapfb_info *ofbi = FB2OFB(fbi); -+ int i; -+ -+ /* XXX: returns the display connected to first attached overlay */ -+ for (i = 0; i < ofbi->num_overlays; i++) { -+ if (ofbi->overlays[i]->manager) -+ return ofbi->overlays[i]->manager->display; -+ } -+ -+ return NULL; -+} -+ -+static inline void omapfb_lock(struct omapfb2_device *fbdev) -+{ -+ mutex_lock(&fbdev->mtx); -+} -+ -+static inline void omapfb_unlock(struct omapfb2_device *fbdev) -+{ -+ mutex_unlock(&fbdev->mtx); -+} -+ -+ -+#endif --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0005-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch b/packages/linux/linux-omap/0005-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch new file mode 100644 index 0000000000..57cec272fb --- /dev/null +++ b/packages/linux/linux-omap/0005-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch @@ -0,0 +1,156 @@ +From b0d997fcd65c4389e3d4a5e375774e51ebe6186a Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Fri, 14 Nov 2008 15:47:19 +0200 +Subject: [PATCH] DSS: Sharp LS037V7DW01 LCD Panel driver + +Signed-off-by: Tomi Valkeinen +--- + drivers/video/omap2/Kconfig | 7 ++- + drivers/video/omap2/Makefile | 1 + + drivers/video/omap2/panel-sharp-ls037v7dw01.c | 109 +++++++++++++++++++++++++ + 3 files changed, 116 insertions(+), 1 deletions(-) + create mode 100644 drivers/video/omap2/panel-sharp-ls037v7dw01.c + +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +index be00882..b54c955 100644 +--- a/drivers/video/omap2/Kconfig ++++ b/drivers/video/omap2/Kconfig +@@ -43,5 +43,10 @@ config PANEL_GENERIC + Generic panel driver. + Used for DVI output for Beagle and OMAP3 SDP. + +-endmenu ++config PANEL_SHARP_LS037V7DW01 ++ tristate "Sharp LS037V7DW01 LCD Panel" ++ depends on OMAP2_DSS ++ help ++ LCD Panel used in TI's SDP3430 and EVM boards + ++endmenu +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +index f471a2b..fe6858e 100644 +--- a/drivers/video/omap2/Makefile ++++ b/drivers/video/omap2/Makefile +@@ -2,3 +2,4 @@ obj-$(CONFIG_FB_OMAP2) += omapfb.o + omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o + + obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o ++obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o +diff --git a/drivers/video/omap2/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/panel-sharp-ls037v7dw01.c +new file mode 100644 +index 0000000..7d67b6d +--- /dev/null ++++ b/drivers/video/omap2/panel-sharp-ls037v7dw01.c +@@ -0,0 +1,109 @@ ++/* ++ * LCD panel driver for Sharp LS037V7DW01 ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++ ++#include ++ ++static int sharp_ls_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static void sharp_ls_panel_cleanup(struct omap_display *display) ++{ ++} ++ ++static int sharp_ls_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void sharp_ls_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++} ++ ++static int sharp_ls_panel_suspend(struct omap_display *display) ++{ ++ sharp_ls_panel_disable(display); ++ return 0; ++} ++ ++static int sharp_ls_panel_resume(struct omap_display *display) ++{ ++ return sharp_ls_panel_enable(display); ++} ++ ++static struct omap_panel sharp_ls_panel = { ++ .owner = THIS_MODULE, ++ .name = "sharp-ls037v7dw01", ++ .init = sharp_ls_panel_init, ++ .cleanup = sharp_ls_panel_cleanup, ++ .enable = sharp_ls_panel_enable, ++ .disable = sharp_ls_panel_disable, ++ .suspend = sharp_ls_panel_suspend, ++ .resume = sharp_ls_panel_resume, ++ /*.set_mode = sharp_ls_set_mode, */ ++ ++ .timings = { ++ .x_res = 480, ++ .y_res = 640, ++ ++ .pixel_clock = 19200, ++ ++ .hsw = 2, ++ .hfp = 1, ++ .hbp = 28, ++ ++ .vsw = 1, ++ .vfp = 1, ++ .vbp = 1, ++ }, ++ ++ .acb = 0x28, ++ ++ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC, ++ ++ .bpp = 16, ++}; ++ ++ ++static int __init sharp_ls_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&sharp_ls_panel); ++ return 0; ++} ++ ++static void __exit sharp_ls_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&sharp_ls_panel); ++} ++ ++module_init(sharp_ls_panel_drv_init); ++module_exit(sharp_ls_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0006-DSS-Add-generic-DVI-panel.patch b/packages/linux/linux-omap/0006-DSS-Add-generic-DVI-panel.patch deleted file mode 100644 index 4a393401bd..0000000000 --- a/packages/linux/linux-omap/0006-DSS-Add-generic-DVI-panel.patch +++ /dev/null @@ -1,217 +0,0 @@ -From 80146c830e0b14f92db3b7d02a05be315cab12b6 Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Tue, 11 Nov 2008 13:52:56 +0200 -Subject: [PATCH] DSS: Add generic DVI panel - -You also need DSI PLL to generate pix clock for 1280x1024. - -Signed-off-by: Tomi Valkeinen ---- - drivers/video/omap2/Kconfig | 23 ++++++ - drivers/video/omap2/Makefile | 2 + - drivers/video/omap2/panel-dvi.c | 150 +++++++++++++++++++++++++++++++++++++++ - 3 files changed, 175 insertions(+), 0 deletions(-) - create mode 100644 drivers/video/omap2/panel-dvi.c - -diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig -index bfa1617..ab6a5fc 100644 ---- a/drivers/video/omap2/Kconfig -+++ b/drivers/video/omap2/Kconfig -@@ -33,6 +33,29 @@ config FB_OMAP2_NUM_FBS - menu "OMAP2/3 Display Device Drivers" - depends on OMAP2_DSS - -+config PANEL_DVI -+ tristate "DVI Panel" -+ help -+ DVI output, for Beagle and OMAP3 SDP -+ -+choice -+ prompt "Default DVI Mode" -+ depends on PANEL_DVI -+ default PANEL_DVI_1024X768 -+ -+config PANEL_DVI_640X480 -+ bool "640 x 480 @ 60" -+ -+config PANEL_DVI_800X600 -+ bool "800 x 600 @ 60" -+ -+config PANEL_DVI_1024X768 -+ bool "1024 x 768 @ 60" -+ -+config PANEL_DVI_1280X1024 -+ bool "1280 x 1024 @ 57" -+ -+endchoice - - endmenu - -diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile -index 51c2e00..7c75340 100644 ---- a/drivers/video/omap2/Makefile -+++ b/drivers/video/omap2/Makefile -@@ -1,2 +1,4 @@ - obj-$(CONFIG_FB_OMAP2) += omapfb.o - omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o -+ -+obj-$(CONFIG_PANEL_DVI) += panel-dvi.o -diff --git a/drivers/video/omap2/panel-dvi.c b/drivers/video/omap2/panel-dvi.c -new file mode 100644 -index 0000000..7a90773 ---- /dev/null -+++ b/drivers/video/omap2/panel-dvi.c -@@ -0,0 +1,150 @@ -+/* -+ * DVI panel support -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#include -+#include -+ -+#include -+ -+static int dvi_panel_init(struct omap_display *display) -+{ -+ return 0; -+} -+ -+static int dvi_panel_enable(struct omap_display *display) -+{ -+ int r = 0; -+ -+ if (display->hw_config.panel_enable) -+ r = display->hw_config.panel_enable(display); -+ -+ return r; -+} -+ -+static void dvi_panel_disable(struct omap_display *display) -+{ -+ if (display->hw_config.panel_disable) -+ display->hw_config.panel_disable(display); -+} -+ -+static int dvi_panel_suspend(struct omap_display *display) -+{ -+ dvi_panel_disable(display); -+ return 0; -+} -+ -+static int dvi_panel_resume(struct omap_display *display) -+{ -+ return dvi_panel_enable(display); -+} -+ -+static struct omap_panel dvi_panel = { -+ .owner = THIS_MODULE, -+ .name = "panel-dvi", -+ .init = dvi_panel_init, -+ /*.remove = dvi_cleanup, */ -+ .enable = dvi_panel_enable, -+ .disable = dvi_panel_disable, -+ .suspend = dvi_panel_suspend, -+ .resume = dvi_panel_resume, -+ /*.set_mode = dvi_set_mode, */ -+ -+#if defined(CONFIG_PANEL_DVI_640X480) -+ .timings = { -+ /* 640 x 480 @ 60 hz reduced blanking vesa -+ * (dunno if these are correct) */ -+ .pixel_clock = 23500, -+ .hfp = 48, -+ .hsw = 32, -+ .hbp = 80, -+ .vfp = 3, -+ .vsw = 4, -+ .vbp = 11, -+ }, -+ -+ .x_res = 640, -+ .y_res = 480, -+ .bpp = 24, -+#elif defined(CONFIG_PANEL_DVI_800X600) -+ .timings = { -+ /* 800 x 600 @ 60 hz reduced blanking vesa cvt 0.48m3-r */ -+ .pixel_clock = 35500, -+ .hfp = 48, -+ .hsw = 32, -+ .hbp = 80, -+ .vfp = 3, -+ .vsw = 4, -+ .vbp = 11, -+ }, -+ -+ .x_res = 800, -+ .y_res = 600, -+ .bpp = 24, -+#elif defined(CONFIG_PANEL_DVI_1024X768) -+ .timings = { -+ /* 1024 x 768 @ 60 Hz Reduced blanking */ -+ .pixel_clock = 56000, -+ .hfp = 48, -+ .hsw = 32, -+ .hbp = 80, -+ .vfp = 3, -+ .vsw = 4, -+ .vbp = 15, -+ }, -+ -+ .x_res = 1024, -+ .y_res = 768, -+ .bpp = 24, -+#elif defined(CONFIG_PANEL_DVI_1280X1024) -+ .timings = { -+ /* 1280 x 1024 @ 57 Hz Reduced blanking */ -+ .pixel_clock = 86500, -+ .hfp = 48, -+ .hsw = 32, -+ .hbp = 80, -+ .vfp = 3, -+ .vsw = 4, -+ .vbp = 15, -+ }, -+ -+ .x_res = 1280, -+ .y_res = 1024, -+ .bpp = 24, -+#else -+#error Undefined default mode -+#endif -+ -+ .config = OMAP_DSS_LCD_TFT, -+}; -+ -+ -+static int __init dvi_panel_drv_init(void) -+{ -+ omap_dss_register_panel(&dvi_panel); -+ return 0; -+} -+ -+static void __exit dvi_panel_drv_exit(void) -+{ -+ omap_dss_unregister_panel(&dvi_panel); -+} -+ -+module_init(dvi_panel_drv_init); -+module_exit(dvi_panel_drv_exit); -+MODULE_LICENSE("GPL"); --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0006-DSS-Support-for-OMAP3-SDP-board.patch b/packages/linux/linux-omap/0006-DSS-Support-for-OMAP3-SDP-board.patch new file mode 100644 index 0000000000..e73264ebb6 --- /dev/null +++ b/packages/linux/linux-omap/0006-DSS-Support-for-OMAP3-SDP-board.patch @@ -0,0 +1,1877 @@ +From 7806a298a80d260473dc488c7cea2a72fe96866f Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Fri, 14 Nov 2008 15:47:55 +0200 +Subject: [PATCH] DSS: Support for OMAP3 SDP board + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/configs/dss_omap_3430sdp_defconfig | 1603 +++++++++++++++++++++++++++ + arch/arm/mach-omap2/board-3430sdp.c | 215 ++++- + 2 files changed, 1809 insertions(+), 9 deletions(-) + create mode 100644 arch/arm/configs/dss_omap_3430sdp_defconfig + +diff --git a/arch/arm/configs/dss_omap_3430sdp_defconfig b/arch/arm/configs/dss_omap_3430sdp_defconfig +new file mode 100644 +index 0000000..42d7f5e +--- /dev/null ++++ b/arch/arm/configs/dss_omap_3430sdp_defconfig +@@ -0,0 +1,1603 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.28-omap1 ++# Wed Jan 7 15:22:34 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y ++CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=14 ++# CONFIG_CGROUPS is not set ++CONFIG_GROUP_SCHED=y ++CONFIG_FAIR_GROUP_SCHED=y ++# CONFIG_RT_GROUP_SCHED is not set ++CONFIG_USER_SCHED=y ++# CONFIG_CGROUP_SCHED is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++# CONFIG_NAMESPACES is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_COMPAT_BRK=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++# CONFIG_MARKERS is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++CONFIG_CLASSIC_RCU=y ++CONFIG_FREEZER=y ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++CONFIG_ARCH_OMAP=y ++# CONFIG_ARCH_MSM is not set ++ ++# ++# TI OMAP Implementations ++# ++CONFIG_ARCH_OMAP_OTG=y ++# CONFIG_ARCH_OMAP1 is not set ++# CONFIG_ARCH_OMAP2 is not set ++CONFIG_ARCH_OMAP3=y ++ ++# ++# OMAP Feature Selections ++# ++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set ++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set ++CONFIG_OMAP_SMARTREFLEX=y ++# CONFIG_OMAP_SMARTREFLEX_TESTING is not set ++CONFIG_OMAP_RESET_CLOCKS=y ++CONFIG_OMAP_BOOT_TAG=y ++CONFIG_OMAP_BOOT_REASON=y ++# CONFIG_OMAP_COMPONENT_VERSION is not set ++# CONFIG_OMAP_GPIO_SWITCH is not set ++CONFIG_OMAP_MUX=y ++CONFIG_OMAP_MUX_DEBUG=y ++CONFIG_OMAP_MUX_WARNINGS=y ++# CONFIG_OMAP_MCBSP is not set ++# CONFIG_OMAP_MMU_FWK is not set ++# CONFIG_OMAP_MBOX_FWK is not set ++# CONFIG_OMAP_MPU_TIMER is not set ++CONFIG_OMAP_32K_TIMER=y ++CONFIG_OMAP_32K_TIMER_HZ=128 ++CONFIG_OMAP_DM_TIMER=y ++CONFIG_OMAP_LL_DEBUG_UART1=y ++# CONFIG_OMAP_LL_DEBUG_UART2 is not set ++# CONFIG_OMAP_LL_DEBUG_UART3 is not set ++CONFIG_OMAP_SERIAL_WAKE=y ++CONFIG_OMAP2_DSS=m ++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y ++# CONFIG_OMAP2_DSS_RFBI is not set ++CONFIG_OMAP2_DSS_VENC=y ++# CONFIG_OMAP2_DSS_SDI is not set ++# CONFIG_OMAP2_DSS_DSI is not set ++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set ++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 ++CONFIG_ARCH_OMAP34XX=y ++CONFIG_ARCH_OMAP3430=y ++ ++# ++# OMAP Board Type ++# ++# CONFIG_MACH_OMAP_LDP is not set ++CONFIG_MACH_OMAP_3430SDP=y ++# CONFIG_MACH_OMAP3EVM is not set ++# CONFIG_MACH_OMAP3_BEAGLE is not set ++# CONFIG_MACH_OVERO is not set ++# CONFIG_MACH_OMAP3_PANDORA is not set ++CONFIG_OMAP_TICK_GPTIMER=1 ++ ++# ++# Boot options ++# ++ ++# ++# Power management ++# ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=128 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++CONFIG_BINFMT_MISC=y ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++# CONFIG_PM_DEBUG is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND=y ++CONFIG_SUSPEND_FREEZER=y ++# CONFIG_APM_EMULATION is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++CONFIG_IP_PNP_RARP=y ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++CONFIG_WIRELESS=y ++# CONFIG_CFG80211 is not set ++CONFIG_WIRELESS_OLD_REGULATORY=y ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_IEEE80211 is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++# CONFIG_MTD_CFI_ADV_OPTIONS is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++CONFIG_MTD_CFI_INTELEXT=y ++# CONFIG_MTD_CFI_AMDSTD is not set ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PHYSMAP is not set ++# CONFIG_MTD_ARM_INTEGRATOR is not set ++CONFIG_MTD_OMAP_NOR=y ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++CONFIG_MTD_NAND_ECC_SMC=y ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_OMAP2=y ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ALAUDA is not set ++CONFIG_MTD_ONENAND=y ++CONFIG_MTD_ONENAND_VERIFY_WRITE=y ++# CONFIG_MTD_ONENAND_GENERIC is not set ++CONFIG_MTD_ONENAND_OMAP2=y ++# CONFIG_MTD_ONENAND_OTP is not set ++# CONFIG_MTD_ONENAND_2X_PROGRAM is not set ++# CONFIG_MTD_ONENAND_SIM is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_ICS932S401 is not set ++# CONFIG_OMAP_STI is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_AX88796 is not set ++CONFIG_SMC91X=y ++# CONFIG_DM9000 is not set ++# CONFIG_ENC28J60 is not set ++# CONFIG_SMC911X is not set ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set ++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set ++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set ++# CONFIG_B44 is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++# CONFIG_INPUT_MOUSEDEV is not set ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++CONFIG_KEYBOARD_TWL4030=y ++# CONFIG_KEYBOARD_LM8323 is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_TSC2005 is not set ++# CONFIG_TOUCHSCREEN_TSC210X is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_NR_UARTS=32 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_MANY_PORTS=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_DETECT_IRQ=y ++CONFIG_SERIAL_8250_RSA=y ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_OMAP=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_TINY_USB is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_AT24 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TPS65010 is not set ++# CONFIG_TWL4030_MADC is not set ++# CONFIG_TWL4030_PWRBUTTON is not set ++# CONFIG_TWL4030_POWEROFF is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_LP5521 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++CONFIG_SPI_OMAP24XX=y ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_TSC210X is not set ++# CONFIG_SPI_TSC2301 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++CONFIG_GPIO_TWL4030=y ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MAX7301 is not set ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++CONFIG_WATCHDOG_NOWAYOUT=y ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_OMAP_WATCHDOG=y ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++CONFIG_TWL4030_CORE=y ++# CONFIG_TWL4030_POWER is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++CONFIG_DAB=y ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++CONFIG_VIDEO_OUTPUT_CONTROL=m ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=m ++CONFIG_FB_CFB_COPYAREA=m ++CONFIG_FB_CFB_IMAGEBLIT=m ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_FB_OMAP_LCD_VGA is not set ++CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 ++CONFIG_FB_OMAP2=m ++CONFIG_FB_OMAP2_DEBUG=y ++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set ++CONFIG_FB_OMAP2_NUM_FBS=3 ++ ++# ++# OMAP2/3 Display Device Drivers ++# ++CONFIG_PANEL_GENERIC=m ++CONFIG_PANEL_SHARP_LS037V7DW01=m ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE is not set ++# CONFIG_LOGO is not set ++# CONFIG_SOUND is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++# CONFIG_HIDRAW is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_HID_PID is not set ++# CONFIG_USB_HIDDEV is not set ++ ++# ++# Special HID drivers ++# ++CONFIG_HID_COMPAT=y ++CONFIG_HID_A4TECH=y ++CONFIG_HID_APPLE=y ++CONFIG_HID_BELKIN=y ++CONFIG_HID_BRIGHT=y ++CONFIG_HID_CHERRY=y ++CONFIG_HID_CHICONY=y ++CONFIG_HID_CYPRESS=y ++CONFIG_HID_DELL=y ++CONFIG_HID_EZKEY=y ++CONFIG_HID_GYRATION=y ++CONFIG_HID_LOGITECH=y ++# CONFIG_LOGITECH_FF is not set ++# CONFIG_LOGIRUMBLEPAD2_FF is not set ++CONFIG_HID_MICROSOFT=y ++CONFIG_HID_MONTEREY=y ++CONFIG_HID_PANTHERLORD=y ++# CONFIG_PANTHERLORD_FF is not set ++CONFIG_HID_PETALYNX=y ++CONFIG_HID_SAMSUNG=y ++CONFIG_HID_SONY=y ++CONFIG_HID_SUNPLUS=y ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++CONFIG_USB=y ++CONFIG_USB_DEBUG=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_DEVICE_CLASS is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++CONFIG_USB_SUSPEND=y ++CONFIG_USB_OTG=y ++# CONFIG_USB_OTG_WHITELIST is not set ++# CONFIG_USB_OTG_BLACKLIST_HUB is not set ++CONFIG_USB_MON=y ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++CONFIG_USB_EHCI_HCD=m ++CONFIG_OMAP_EHCI_PHY_MODE=y ++# CONFIG_OMAP_EHCI_TLL_MODE is not set ++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set ++# CONFIG_USB_EHCI_TT_NEWSCHED is not set ++# CONFIG_USB_ISP116X_HCD is not set ++# CONFIG_USB_OHCI_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++CONFIG_USB_MUSB_HDRC=y ++CONFIG_USB_MUSB_SOC=y ++ ++# ++# OMAP 343x high speed USB support ++# ++# CONFIG_USB_MUSB_HOST is not set ++# CONFIG_USB_MUSB_PERIPHERAL is not set ++CONFIG_USB_MUSB_OTG=y ++CONFIG_USB_GADGET_MUSB_HDRC=y ++CONFIG_USB_MUSB_HDRC_HCD=y ++# CONFIG_MUSB_PIO_ONLY is not set ++CONFIG_USB_INVENTRA_DMA=y ++# CONFIG_USB_TI_CPPI_DMA is not set ++# CONFIG_USB_MUSB_DEBUG is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_DEBUG=y ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_SISUSBVGA is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++CONFIG_USB_TEST=y ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_DEBUG=y ++CONFIG_USB_GADGET_DEBUG_FILES=y ++# CONFIG_USB_GADGET_DEBUG_FS is not set ++CONFIG_USB_GADGET_VBUS_DRAW=2 ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++CONFIG_USB_ZERO=m ++# CONFIG_USB_ZERO_HNPTEST is not set ++# CONFIG_USB_ETH is not set ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++ ++# ++# OTG and related infrastructure ++# ++CONFIG_USB_OTG_UTILS=y ++# CONFIG_USB_GPIO_VBUS is not set ++# CONFIG_ISP1301_OMAP is not set ++CONFIG_TWL4030_USB=y ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++# CONFIG_MMC_SDHCI is not set ++CONFIG_MMC_OMAP_HS=m ++# CONFIG_MMC_SPI is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++CONFIG_RTC_DRV_TWL4030=y ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_M41T94 is not set ++# CONFIG_RTC_DRV_DS1305 is not set ++# CONFIG_RTC_DRV_DS1390 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_DS3234 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++# CONFIG_DMADEVICES is not set ++# CONFIG_REGULATOR is not set ++# CONFIG_UIO is not set ++ ++# ++# CBUS support ++# ++# CONFIG_CBUS is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_OCFS2_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++CONFIG_QUOTA=y ++# CONFIG_QUOTA_NETLINK_INTERFACE is not set ++CONFIG_PRINT_QUOTA_WARNING=y ++# CONFIG_QFMT_V1 is not set ++CONFIG_QFMT_V2=y ++CONFIG_QUOTACTL=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++CONFIG_JFFS2_COMPRESSION_OPTIONS=y ++CONFIG_JFFS2_ZLIB=y ++# CONFIG_JFFS2_LZO is not set ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_JFFS2_CMODE_NONE is not set ++CONFIG_JFFS2_CMODE_PRIORITY=y ++# CONFIG_JFFS2_CMODE_SIZE is not set ++# CONFIG_JFFS2_CMODE_FAVOURLZO is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++CONFIG_NFS_V4=y ++CONFIG_ROOT_NFS=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++CONFIG_SUNRPC_GSS=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++CONFIG_RPCSEC_GSS_KRB5=y ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_FS=y ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++# CONFIG_DEBUG_MEMORY_INIT is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_IRQSOFF_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++# CONFIG_DEBUG_LL is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_ALGAPI2=y ++CONFIG_CRYPTO_AEAD2=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_BLKCIPHER2=y ++CONFIG_CRYPTO_HASH2=y ++CONFIG_CRYPTO_RNG2=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_MANAGER2=y ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++CONFIG_CRYPTO_CBC=y ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++CONFIG_CRYPTO_ECB=m ++# CONFIG_CRYPTO_LRW is not set ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c +index ade186b..529322f 100644 +--- a/arch/arm/mach-omap2/board-3430sdp.c ++++ b/arch/arm/mach-omap2/board-3430sdp.c +@@ -39,6 +39,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -238,14 +239,214 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { + }, + }; + +-static struct platform_device sdp3430_lcd_device = { +- .name = "sdp2430_lcd", +- .id = -1, ++ ++#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 ++#define SDP2430_LCD_PANEL_ENABLE_GPIO 154 ++#if 0 ++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24 ++#define SDP3430_LCD_PANEL_ENABLE_GPIO 28 ++#else ++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 ++#define SDP3430_LCD_PANEL_ENABLE_GPIO 5 ++#endif ++ ++#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER ++#define ENABLE_VAUX2_DEDICATED 0x09 ++#define ENABLE_VAUX2_DEV_GRP 0x20 ++#define ENABLE_VAUX3_DEDICATED 0x03 ++#define ENABLE_VAUX3_DEV_GRP 0x20 ++ ++#define ENABLE_VPLL2_DEDICATED 0x05 ++#define ENABLE_VPLL2_DEV_GRP 0xE0 ++#define TWL4030_VPLL2_DEV_GRP 0x33 ++#define TWL4030_VPLL2_DEDICATED 0x36 ++ ++#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) ++ ++static unsigned backlight_gpio; ++static unsigned enable_gpio; ++static int lcd_enabled; ++static int dvi_enabled; ++ ++static void __init sdp3430_display_init(void) ++{ ++ int r; ++ ++ enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; ++ backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; ++ ++ r = gpio_request(enable_gpio, "LCD reset"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD reset GPIO\n"); ++ goto err0; ++ } ++ ++ r = gpio_request(backlight_gpio, "LCD Backlight"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD backlight GPIO\n"); ++ goto err1; ++ } ++ ++ gpio_direction_output(enable_gpio, 0); ++ gpio_direction_output(backlight_gpio, 0); ++ ++ return; ++err1: ++ gpio_free(enable_gpio); ++err0: ++ return; ++} ++ ++ ++static int sdp3430_panel_enable_lcd(struct omap_display *display) ++{ ++ u8 ded_val, ded_reg; ++ u8 grp_val, grp_reg; ++ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED, ++ TWL4030_VPLL2_DEDICATED); ++ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ ++ ded_reg = TWL4030_VAUX3_DEDICATED; ++ ded_val = ENABLE_VAUX3_DEDICATED; ++ grp_reg = TWL4030_VAUX3_DEV_GRP; ++ grp_val = ENABLE_VAUX3_DEV_GRP; ++ ++ gpio_direction_output(enable_gpio, 1); ++ gpio_direction_output(backlight_gpio, 1); ++ ++ if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg)) ++ return -EIO; ++ if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg)) ++ return -EIO; ++ ++ lcd_enabled = 1; ++ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_lcd(struct omap_display *display) ++{ ++ lcd_enabled = 0; ++ ++ gpio_direction_output(enable_gpio, 0); ++ gpio_direction_output(backlight_gpio, 0); ++ ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED); ++ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP); ++ mdelay(4); ++ } ++} ++ ++static struct omap_display_data sdp3430_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd", ++ .panel_name = "sharp-ls037v7dw01", ++ .u.dpi.data_lines = 16, ++ .panel_enable = sdp3430_panel_enable_lcd, ++ .panel_disable = sdp3430_panel_disable_lcd, ++}; ++ ++static int sdp3430_panel_enable_dvi(struct omap_display *display) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED, ++ TWL4030_VPLL2_DEDICATED); ++ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_dvi(struct omap_display *display) ++{ ++ dvi_enabled = 0; ++ ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED); ++ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP); ++ mdelay(4); ++ } ++} ++ ++ ++static struct omap_display_data sdp3430_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-generic", ++ .u.dpi.data_lines = 24, ++ .panel_enable = sdp3430_panel_enable_dvi, ++ .panel_disable = sdp3430_panel_disable_dvi, + }; + ++static int sdp3430_panel_enable_tv(struct omap_display *display) ++{ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_display_data sdp3430_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = sdp3430_panel_enable_tv, ++ .panel_disable = sdp3430_panel_disable_tv, ++}; ++ ++static struct omap_dss_platform_data sdp3430_dss_data = { ++ .num_displays = 3, ++ .displays = { ++ &sdp3430_display_data, ++ &sdp3430_display_data_dvi, ++ &sdp3430_display_data_tv, ++ } ++}; ++ ++static struct platform_device sdp3430_dss_device = { ++ .name = "omap-dss", ++ .id = -1, ++ .dev = { ++ .platform_data = &sdp3430_dss_data, ++ }, ++}; ++ ++ + static struct platform_device *sdp3430_devices[] __initdata = { + &sdp3430_smc91x_device, +- &sdp3430_lcd_device, ++ &sdp3430_dss_device, + }; + + static inline void __init sdp3430_init_smc91x(void) +@@ -292,13 +493,8 @@ static struct omap_uart_config sdp3430_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), + }; + +-static struct omap_lcd_config sdp3430_lcd_config __initdata = { +- .ctrl_name = "internal", +-}; +- + static struct omap_board_config_kernel sdp3430_config[] __initdata = { + { OMAP_TAG_UART, &sdp3430_uart_config }, +- { OMAP_TAG_LCD, &sdp3430_lcd_config }, + }; + + static int sdp3430_batt_table[] = { +@@ -481,6 +677,7 @@ static void __init omap_3430sdp_init(void) + usb_musb_init(); + usb_ehci_init(); + twl4030_mmc_init(mmc); ++ sdp3430_display_init(); + } + + static void __init omap_3430sdp_map_io(void) +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0007-DSS-Support-for-OMAP3-EVM-board.patch b/packages/linux/linux-omap/0007-DSS-Support-for-OMAP3-EVM-board.patch new file mode 100644 index 0000000000..fb12ea4c03 --- /dev/null +++ b/packages/linux/linux-omap/0007-DSS-Support-for-OMAP3-EVM-board.patch @@ -0,0 +1,255 @@ +From 98b4c02ad7229074414bc51bae1452fe93ab5111 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Mon, 5 Jan 2009 14:57:32 +0200 +Subject: [PATCH] DSS: Support for OMAP3 EVM board + +Coded by Vaibhav Hiremath + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/mach-omap2/board-omap3evm.c | 203 ++++++++++++++++++++++++++++++++- + 1 files changed, 196 insertions(+), 7 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index e4e60e2..e7ec9e6 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -36,6 +36,7 @@ + #include + #include + #include ++#include + + #include "sdram-micron-mt46h32m32lf-6.h" + #include "twl4030-generic-scripts.h" +@@ -160,13 +161,201 @@ static int __init omap3_evm_i2c_init(void) + return 0; + } + +-static struct platform_device omap3_evm_lcd_device = { +- .name = "omap3evm_lcd", +- .id = -1, ++#define LCD_PANEL_LR 2 ++#define LCD_PANEL_UD 3 ++#define LCD_PANEL_INI 152 ++#define LCD_PANEL_ENABLE_GPIO 153 ++#define LCD_PANEL_QVGA 154 ++#define LCD_PANEL_RESB 155 ++ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++#define ENABLE_VPLL2_DEDICATED 0x05 ++#define ENABLE_VPLL2_DEV_GRP 0xE0 ++ ++#define TWL4030_GPIODATA_IN3 0x03 ++#define TWL4030_GPIODATA_DIR3 0x06 ++#define TWL4030_VPLL2_DEV_GRP 0x33 ++#define TWL4030_VPLL2_DEDICATED 0x36 ++ ++static int lcd_enabled; ++static int dvi_enabled; ++ ++static void __init omap3_evm_display_init(void) ++{ ++ int r; ++ r = gpio_request(LCD_PANEL_LR, "lcd_panel_lr"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_LR\n"); ++ return; ++ } ++ r = gpio_request(LCD_PANEL_UD, "lcd_panel_ud"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_UD\n"); ++ goto err_1; ++ } ++ ++ r = gpio_request(LCD_PANEL_INI, "lcd_panel_ini"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_INI\n"); ++ goto err_2; ++ } ++ r = gpio_request(LCD_PANEL_RESB, "lcd_panel_resb"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_RESB\n"); ++ goto err_3; ++ } ++ r = gpio_request(LCD_PANEL_QVGA, "lcd_panel_qvga"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_QVGA\n"); ++ goto err_4; ++ } ++ ++ gpio_direction_output(LCD_PANEL_LR, 0); ++ gpio_direction_output(LCD_PANEL_UD, 0); ++ gpio_direction_output(LCD_PANEL_INI, 0); ++ gpio_direction_output(LCD_PANEL_RESB, 0); ++ gpio_direction_output(LCD_PANEL_QVGA, 0); ++ ++#define TWL_LED_LEDEN 0x00 ++#define TWL_PWMA_PWMAON 0x00 ++#define TWL_PWMA_PWMAOFF 0x01 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); ++ ++ gpio_direction_output(LCD_PANEL_RESB, 1); ++ gpio_direction_output(LCD_PANEL_INI, 1); ++ gpio_direction_output(LCD_PANEL_QVGA, 0); ++ gpio_direction_output(LCD_PANEL_LR, 1); ++ gpio_direction_output(LCD_PANEL_UD, 1); ++ ++ return; ++ ++err_4: ++ gpio_free(LCD_PANEL_RESB); ++err_3: ++ gpio_free(LCD_PANEL_INI); ++err_2: ++ gpio_free(LCD_PANEL_UD); ++err_1: ++ gpio_free(LCD_PANEL_LR); ++ ++} ++ ++static int omap3_evm_panel_enable_lcd(struct omap_display *display) ++{ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); ++ } ++ gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); ++ lcd_enabled = 1; ++ return 0; ++} ++ ++static void omap3_evm_panel_disable_lcd(struct omap_display *display) ++{ ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); ++ lcd_enabled = 0; ++} ++ ++static struct omap_display_data omap3_evm_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd", ++ .panel_name = "sharp-ls037v7dw01", ++ .u.dpi.data_lines = 18, ++ .panel_enable = omap3_evm_panel_enable_lcd, ++ .panel_disable = omap3_evm_panel_disable_lcd, + }; + +-static struct omap_lcd_config omap3_evm_lcd_config __initdata = { +- .ctrl_name = "internal", ++static int omap3_evm_panel_enable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ return 0; ++} ++ ++static void omap3_evm_panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_display_data omap3_evm_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = omap3_evm_panel_enable_tv, ++ .panel_disable = omap3_evm_panel_disable_tv, ++}; ++ ++ ++static int omap3_evm_panel_enable_dvi(struct omap_display *display) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, ++ TWL4030_GPIODATA_IN3); ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, ++ TWL4030_GPIODATA_DIR3); ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void omap3_evm_panel_disable_dvi(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, ++ TWL4030_GPIODATA_IN3); ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, ++ TWL4030_GPIODATA_DIR3); ++ dvi_enabled = 0; ++} ++ ++ ++static struct omap_display_data omap3_evm_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-generic", ++ .u.dpi.data_lines = 24, ++ .panel_enable = omap3_evm_panel_enable_dvi, ++ .panel_disable = omap3_evm_panel_disable_dvi, ++}; ++ ++static struct omap_dss_platform_data omap3_evm_dss_data = { ++ .num_displays = 3, ++ .displays = { ++ &omap3_evm_display_data, ++ &omap3_evm_display_data_dvi, ++ &omap3_evm_display_data_tv, ++ } ++}; ++static struct platform_device omap3_evm_dss_device = { ++ .name = "omap-dss", ++ .id = -1, ++ .dev = { ++ .platform_data = &omap3_evm_dss_data, ++ }, + }; + + static void ads7846_dev_init(void) +@@ -225,11 +414,10 @@ static void __init omap3_evm_init_irq(void) + + static struct omap_board_config_kernel omap3_evm_config[] __initdata = { + { OMAP_TAG_UART, &omap3_evm_uart_config }, +- { OMAP_TAG_LCD, &omap3_evm_lcd_config }, + }; + + static struct platform_device *omap3_evm_devices[] __initdata = { +- &omap3_evm_lcd_device, ++ &omap3_evm_dss_device, + &omap3evm_smc911x_device, + }; + +@@ -260,6 +448,7 @@ static void __init omap3_evm_init(void) + usb_ehci_init(); + omap3evm_flash_init(); + ads7846_dev_init(); ++ omap3_evm_display_init(); + } + + static void __init omap3_evm_map_io(void) +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0007-DSS-support-for-Beagle-Board.patch b/packages/linux/linux-omap/0007-DSS-support-for-Beagle-Board.patch deleted file mode 100644 index d5d1c5fb1a..0000000000 --- a/packages/linux/linux-omap/0007-DSS-support-for-Beagle-Board.patch +++ /dev/null @@ -1,168 +0,0 @@ -From f0685afb06fbe2e00d75beb2c997f0367a0fe6ad Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Mon, 29 Sep 2008 17:03:36 +0300 -Subject: [PATCH] DSS: support for Beagle Board - -Signed-off-by: Tomi Valkeinen ---- - arch/arm/mach-omap2/board-omap3beagle.c | 109 +++++++++++++++++++++++++++---- - 1 files changed, 95 insertions(+), 14 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c -index fe97bab..f3ef73e 100644 ---- a/arch/arm/mach-omap2/board-omap3beagle.c -+++ b/arch/arm/mach-omap2/board-omap3beagle.c -@@ -43,6 +43,8 @@ - #include - #include - #include -+#include -+#include - - #include "twl4030-generic-scripts.h" - #include "mmc-twl4030.h" -@@ -238,15 +240,6 @@ static void __init omap3_beagle_init_irq(void) - omap_gpio_init(); - } - --static struct platform_device omap3_beagle_lcd_device = { -- .name = "omap3beagle_lcd", -- .id = -1, --}; -- --static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { -- .ctrl_name = "internal", --}; -- - static struct gpio_led gpio_leds[] = { - { - .name = "beagleboard::usr0", -@@ -300,13 +293,94 @@ static struct platform_device keys_gpio = { - }, - }; - -+/* DSS */ -+ -+static int beagle_enable_dvi(struct omap_display *display) -+{ -+ if (display->hw_config.panel_reset_gpio != -1) -+ gpio_direction_output(display->hw_config.panel_reset_gpio, 1); -+ -+ return 0; -+} -+ -+static void beagle_disable_dvi(struct omap_display *display) -+{ -+ if (display->hw_config.panel_reset_gpio != -1) -+ gpio_direction_output(display->hw_config.panel_reset_gpio, 0); -+} -+ -+static struct omap_display_data beagle_display_data_dvi = { -+ .type = OMAP_DISPLAY_TYPE_DPI, -+ .name = "dvi", -+ .panel_name = "panel-dvi", -+ .u.dpi.data_lines = 24, -+ .panel_reset_gpio = 170, -+ .panel_enable = beagle_enable_dvi, -+ .panel_disable = beagle_disable_dvi, -+}; -+ -+ -+static int beagle_panel_enable_tv(struct omap_display *display) -+{ -+#define ENABLE_VDAC_DEDICATED 0x03 -+#define ENABLE_VDAC_DEV_GRP 0x20 -+ -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, -+ ENABLE_VDAC_DEDICATED, -+ TWL4030_VDAC_DEDICATED); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, -+ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); -+ -+ return 0; -+} -+ -+static void beagle_panel_disable_tv(struct omap_display *display) -+{ -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, -+ TWL4030_VDAC_DEDICATED); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, -+ TWL4030_VDAC_DEV_GRP); -+} -+ -+static struct omap_display_data beagle_display_data_tv = { -+ .type = OMAP_DISPLAY_TYPE_VENC, -+ .name = "tv", -+ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, -+ .panel_enable = beagle_panel_enable_tv, -+ .panel_disable = beagle_panel_disable_tv, -+}; -+ -+static struct omap_dss_platform_data beagle_dss_data = { -+ .num_displays = 2, -+ .displays = { -+ &beagle_display_data_dvi, -+ &beagle_display_data_tv, -+ } -+}; -+ -+static struct platform_device beagle_dss_device = { -+ .name = "omap-dss", -+ .id = -1, -+ .dev = { -+ .platform_data = &beagle_dss_data, -+ }, -+}; -+ -+static void __init beagle_display_init(void) -+{ -+ int r; -+ -+ r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset"); -+ if (r < 0) -+ printk(KERN_ERR "Unable to get DVI reset GPIO\n"); -+} -+ - static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { - { OMAP_TAG_UART, &omap3_beagle_uart_config }, -- { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, - }; - - static struct platform_device *omap3_beagle_devices[] __initdata = { -- &omap3_beagle_lcd_device, -+ &beagle_dss_device, - &leds_gpio, - &keys_gpio, - }; -@@ -359,18 +433,25 @@ static void __init omap3_beagle_init(void) - omap_serial_init(); - - omap_cfg_reg(J25_34XX_GPIO170); -- gpio_request(170, "DVI_nPD"); -- /* REVISIT leave DVI powered down until it's needed ... */ -- gpio_direction_output(170, true); - - usb_musb_init(); - usb_ehci_init(); - omap3beagle_flash_init(); -+ beagle_display_init(); - } - -+static struct omap_fbmem_config omap3_beagle_vram_config[] = { -+ { -+ .size = 1280 * 1024 * 4 * 3, -+ .start = OMAPFB_MEMTYPE_SDRAM, -+ }, -+}; -+ - static void __init omap3_beagle_map_io(void) - { - omap2_set_globals_343x(); -+ omapfb_set_vram_config(omap3_beagle_vram_config, -+ ARRAY_SIZE(omap3_beagle_vram_config)); - omap2_map_common_io(); - } - --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0008-DSS-BEAGLE-Enable-DSS-in-beagle-defconfig.patch b/packages/linux/linux-omap/0008-DSS-BEAGLE-Enable-DSS-in-beagle-defconfig.patch deleted file mode 100644 index cc7ad9d0f2..0000000000 --- a/packages/linux/linux-omap/0008-DSS-BEAGLE-Enable-DSS-in-beagle-defconfig.patch +++ /dev/null @@ -1,463 +0,0 @@ -From 285a7d392dcbc9b60c7523eb6f5c2b064cf52cc6 Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Fri, 7 Nov 2008 16:54:01 +0200 -Subject: [PATCH] DSS: BEAGLE: Enable DSS in beagle defconfig - -Signed-off-by: Tomi Valkeinen ---- - arch/arm/configs/omap3_beagle_defconfig | 149 +++++++++++++++++++++---------- - 1 files changed, 102 insertions(+), 47 deletions(-) - -diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig -index df67296..aa3ee12 100644 ---- a/arch/arm/configs/omap3_beagle_defconfig -+++ b/arch/arm/configs/omap3_beagle_defconfig -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.27-omap1 --# Fri Oct 17 14:05:39 2008 -+# Linux kernel version: 2.6.28-rc4-omap1 -+# Thu Nov 13 15:51:03 2008 - # - CONFIG_ARM=y - CONFIG_SYS_SUPPORTS_APM_EMULATION=y -@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y - # CONFIG_ARCH_HAS_ILOG2_U64 is not set - CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y --CONFIG_ARCH_SUPPORTS_AOUT=y --CONFIG_ZONE_DMA=y - CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y - CONFIG_VECTORS_BASE=0xffff0000 - CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -@@ -79,6 +77,7 @@ CONFIG_SIGNALFD=y - CONFIG_TIMERFD=y - CONFIG_EVENTFD=y - CONFIG_SHMEM=y -+CONFIG_AIO=y - CONFIG_VM_EVENT_COUNTERS=y - CONFIG_SLAB=y - # CONFIG_SLUB is not set -@@ -87,15 +86,9 @@ CONFIG_SLAB=y - # CONFIG_MARKERS is not set - CONFIG_HAVE_OPROFILE=y - # CONFIG_KPROBES is not set --# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set --# CONFIG_HAVE_IOREMAP_PROT is not set - CONFIG_HAVE_KPROBES=y - CONFIG_HAVE_KRETPROBES=y --# CONFIG_HAVE_ARCH_TRACEHOOK is not set --# CONFIG_HAVE_DMA_ATTRS is not set --# CONFIG_USE_GENERIC_SMP_HELPERS is not set - CONFIG_HAVE_CLK=y --CONFIG_PROC_PAGE_MONITOR=y - CONFIG_HAVE_GENERIC_DMA_COHERENT=y - CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y -@@ -128,6 +121,7 @@ CONFIG_DEFAULT_AS=y - # CONFIG_DEFAULT_NOOP is not set - CONFIG_DEFAULT_IOSCHED="anticipatory" - CONFIG_CLASSIC_RCU=y -+# CONFIG_FREEZER is not set - - # - # System Type -@@ -168,7 +162,7 @@ CONFIG_CLASSIC_RCU=y - # CONFIG_ARCH_LH7A40X is not set - # CONFIG_ARCH_DAVINCI is not set - CONFIG_ARCH_OMAP=y --# CONFIG_ARCH_MSM7X00A is not set -+# CONFIG_ARCH_MSM is not set - - # - # TI OMAP Implementations -@@ -200,6 +194,14 @@ CONFIG_OMAP_DM_TIMER=y - # CONFIG_OMAP_LL_DEBUG_UART1 is not set - # CONFIG_OMAP_LL_DEBUG_UART2 is not set - CONFIG_OMAP_LL_DEBUG_UART3=y -+CONFIG_OMAP2_DSS=y -+# CONFIG_OMAP2_DSS_DEBUG is not set -+# CONFIG_OMAP2_DSS_RFBI is not set -+CONFIG_OMAP2_DSS_VENC=y -+# CONFIG_OMAP2_DSS_SDI is not set -+# CONFIG_OMAP2_DSS_DSI is not set -+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set -+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 - CONFIG_ARCH_OMAP34XX=y - CONFIG_ARCH_OMAP3430=y - -@@ -211,6 +213,7 @@ CONFIG_ARCH_OMAP3430=y - # CONFIG_MACH_OMAP3EVM is not set - CONFIG_MACH_OMAP3_BEAGLE=y - # CONFIG_MACH_OVERO is not set -+# CONFIG_MACH_OMAP3_PANDORA is not set - CONFIG_OMAP_TICK_GPTIMER=12 - - # -@@ -263,26 +266,30 @@ CONFIG_TICK_ONESHOT=y - CONFIG_NO_HZ=y - CONFIG_HIGH_RES_TIMERS=y - CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -+CONFIG_VMSPLIT_3G=y -+# CONFIG_VMSPLIT_2G is not set -+# CONFIG_VMSPLIT_1G is not set -+CONFIG_PAGE_OFFSET=0xC0000000 - # CONFIG_PREEMPT is not set - CONFIG_HZ=128 - CONFIG_AEABI=y - CONFIG_OABI_COMPAT=y - CONFIG_ARCH_FLATMEM_HAS_HOLES=y --# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set - CONFIG_SELECT_MEMORY_MODEL=y - CONFIG_FLATMEM_MANUAL=y - # CONFIG_DISCONTIGMEM_MANUAL is not set - # CONFIG_SPARSEMEM_MANUAL is not set - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y --# CONFIG_SPARSEMEM_STATIC is not set --# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_PAGEFLAGS_EXTENDED=y - CONFIG_SPLIT_PTLOCK_CPUS=4 - # CONFIG_RESOURCES_64BIT is not set --CONFIG_ZONE_DMA_FLAG=1 --CONFIG_BOUNCE=y -+# CONFIG_PHYS_ADDR_T_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 - CONFIG_VIRT_TO_BUS=y -+CONFIG_UNEVICTABLE_LRU=y - # CONFIG_LEDS is not set - CONFIG_ALIGNMENT_TRAP=y - -@@ -296,9 +303,10 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16 - # CONFIG_KEXEC is not set - - # --# CPU Frequency scaling -+# CPU Power Management - # - # CONFIG_CPU_FREQ is not set -+# CONFIG_CPU_IDLE is not set - - # - # Floating point emulation -@@ -318,6 +326,8 @@ CONFIG_VFPv3=y - # Userspace binary formats - # - CONFIG_BINFMT_ELF=y -+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -+CONFIG_HAVE_AOUT=y - # CONFIG_BINFMT_AOUT is not set - CONFIG_BINFMT_MISC=y - -@@ -379,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_TIPC is not set - # CONFIG_ATM is not set - # CONFIG_BRIDGE is not set -+# CONFIG_NET_DSA is not set - # CONFIG_VLAN_8021Q is not set - # CONFIG_DECNET is not set - # CONFIG_LLC2 is not set -@@ -399,11 +410,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_IRDA is not set - # CONFIG_BT is not set - # CONFIG_AF_RXRPC is not set -- --# --# Wireless --# -+# CONFIG_PHONET is not set -+CONFIG_WIRELESS=y - # CONFIG_CFG80211 is not set -+CONFIG_WIRELESS_OLD_REGULATORY=y - # CONFIG_WIRELESS_EXT is not set - # CONFIG_MAC80211 is not set - # CONFIG_IEEE80211 is not set -@@ -490,6 +500,7 @@ CONFIG_MTD_NAND=y - # CONFIG_MTD_NAND_VERIFY_WRITE is not set - # CONFIG_MTD_NAND_ECC_SMC is not set - # CONFIG_MTD_NAND_MUSEUM_IDS is not set -+# CONFIG_MTD_NAND_GPIO is not set - CONFIG_MTD_NAND_OMAP2=y - CONFIG_MTD_NAND_IDS=y - # CONFIG_MTD_NAND_DISKONCHIP is not set -@@ -743,6 +754,8 @@ CONFIG_GPIO_TWL4030=y - # CONFIG_W1 is not set - # CONFIG_POWER_SUPPLY is not set - # CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set - # CONFIG_WATCHDOG is not set - - # -@@ -760,10 +773,14 @@ CONFIG_SSB_POSSIBLE=y - # CONFIG_HTC_EGPIO is not set - # CONFIG_HTC_PASIC3 is not set - CONFIG_TWL4030_CORE=y -+# CONFIG_TWL4030_POWER is not set - # CONFIG_MFD_TMIO is not set - # CONFIG_MFD_T7L66XB is not set - # CONFIG_MFD_TC6387XB is not set - # CONFIG_MFD_TC6393XB is not set -+# CONFIG_PMIC_DA903X is not set -+# CONFIG_MFD_WM8400 is not set -+# CONFIG_MFD_WM8350_I2C is not set - - # - # Multimedia devices -@@ -790,6 +807,7 @@ CONFIG_DAB=y - CONFIG_FB=y - # CONFIG_FIRMWARE_EDID is not set - # CONFIG_FB_DDC is not set -+# CONFIG_FB_BOOT_VESA_SUPPORT is not set - CONFIG_FB_CFB_FILLRECT=y - CONFIG_FB_CFB_COPYAREA=y - CONFIG_FB_CFB_IMAGEBLIT=y -@@ -810,10 +828,22 @@ CONFIG_FB_CFB_IMAGEBLIT=y - # - # CONFIG_FB_S1D13XXX is not set - # CONFIG_FB_VIRTUAL is not set --CONFIG_FB_OMAP=y --# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set --# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set --CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4 -+# CONFIG_FB_METRONOME is not set -+# CONFIG_FB_MB862XX is not set -+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14 -+CONFIG_FB_OMAP2=y -+# CONFIG_FB_OMAP2_DEBUG is not set -+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set -+ -+# -+# OMAP2/3 Display Device Drivers -+# -+CONFIG_PANEL_DVI=y -+# CONFIG_PANEL_DVI_LOWLOWRES is not set -+# CONFIG_PANEL_DVI_LOWRES is not set -+CONFIG_PANEL_DVI_HIGHRES=y -+# CONFIG_PANEL_DVI_VERYHIGHRES is not set -+# CONFIG_PANEL_SDP3430 is not set - # CONFIG_BACKLIGHT_LCD_SUPPORT is not set - - # -@@ -862,6 +892,8 @@ CONFIG_USB_OTG=y - # CONFIG_USB_OTG_WHITELIST is not set - # CONFIG_USB_OTG_BLACKLIST_HUB is not set - CONFIG_USB_MON=y -+# CONFIG_USB_WUSB is not set -+# CONFIG_USB_WUSB_CBAF is not set - - # - # USB Host Controller Drivers -@@ -873,6 +905,7 @@ CONFIG_USB_MON=y - # CONFIG_USB_OHCI_HCD is not set - # CONFIG_USB_SL811_HCD is not set - # CONFIG_USB_R8A66597_HCD is not set -+# CONFIG_USB_HWA_HCD is not set - CONFIG_USB_MUSB_HDRC=y - CONFIG_USB_MUSB_SOC=y - -@@ -895,6 +928,7 @@ CONFIG_USB_INVENTRA_DMA=y - # CONFIG_USB_ACM is not set - # CONFIG_USB_PRINTER is not set - # CONFIG_USB_WDM is not set -+# CONFIG_USB_TMC is not set - - # - # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -@@ -923,6 +957,7 @@ CONFIG_USB_INVENTRA_DMA=y - # CONFIG_USB_EMI62 is not set - # CONFIG_USB_EMI26 is not set - # CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_SEVSEG is not set - # CONFIG_USB_RIO500 is not set - # CONFIG_USB_LEGOTOWER is not set - # CONFIG_USB_LCD is not set -@@ -939,22 +974,25 @@ CONFIG_USB_INVENTRA_DMA=y - # CONFIG_USB_IOWARRIOR is not set - # CONFIG_USB_TEST is not set - # CONFIG_USB_ISIGHTFW is not set -+# CONFIG_USB_VST is not set - CONFIG_USB_GADGET=y - # CONFIG_USB_GADGET_DEBUG is not set - # CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_VBUS_DRAW=2 - CONFIG_USB_GADGET_SELECTED=y --# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_AT91 is not set - # CONFIG_USB_GADGET_ATMEL_USBA is not set - # CONFIG_USB_GADGET_FSL_USB2 is not set --# CONFIG_USB_GADGET_NET2280 is not set --# CONFIG_USB_GADGET_PXA25X is not set --# CONFIG_USB_GADGET_M66592 is not set --# CONFIG_USB_GADGET_PXA27X is not set --# CONFIG_USB_GADGET_GOKU is not set - # CONFIG_USB_GADGET_LH7A40X is not set - # CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_PXA25X is not set -+# CONFIG_USB_GADGET_PXA27X is not set - # CONFIG_USB_GADGET_S3C2410 is not set --# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_FSL_QE is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_GOKU is not set - # CONFIG_USB_GADGET_DUMMY_HCD is not set - CONFIG_USB_GADGET_DUALSPEED=y - # CONFIG_USB_ZERO is not set -@@ -971,7 +1009,7 @@ CONFIG_MMC=y - # CONFIG_MMC_UNSAFE_RESUME is not set - - # --# MMC/SD Card Drivers -+# MMC/SD/SDIO Card Drivers - # - CONFIG_MMC_BLOCK=y - CONFIG_MMC_BLOCK_BOUNCE=y -@@ -979,10 +1017,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y - # CONFIG_MMC_TEST is not set - - # --# MMC/SD Host Controller Drivers -+# MMC/SD/SDIO Host Controller Drivers - # - # CONFIG_MMC_SDHCI is not set - CONFIG_MMC_OMAP_HS=y -+# CONFIG_MEMSTICK is not set -+# CONFIG_ACCESSIBILITY is not set - # CONFIG_NEW_LEDS is not set - CONFIG_RTC_LIB=y - CONFIG_RTC_CLASS=y -@@ -1024,26 +1064,22 @@ CONFIG_RTC_DRV_TWL4030=y - # Platform RTC drivers - # - # CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1286 is not set - # CONFIG_RTC_DRV_DS1511 is not set - # CONFIG_RTC_DRV_DS1553 is not set - # CONFIG_RTC_DRV_DS1742 is not set - # CONFIG_RTC_DRV_STK17TA8 is not set - # CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T35 is not set - # CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_BQ4802 is not set - # CONFIG_RTC_DRV_V3020 is not set - - # - # on-CPU RTC drivers - # - # CONFIG_DMADEVICES is not set -- --# --# Voltage and Current regulators --# - # CONFIG_REGULATOR is not set --# CONFIG_REGULATOR_FIXED_VOLTAGE is not set --# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set --# CONFIG_REGULATOR_BQ24022 is not set - # CONFIG_UIO is not set - - # -@@ -1059,11 +1095,12 @@ CONFIG_EXT2_FS=y - # CONFIG_EXT2_FS_XIP is not set - CONFIG_EXT3_FS=y - # CONFIG_EXT3_FS_XATTR is not set --# CONFIG_EXT4DEV_FS is not set -+# CONFIG_EXT4_FS is not set - CONFIG_JBD=y - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set - # CONFIG_FS_POSIX_ACL is not set -+CONFIG_FILE_LOCKING=y - # CONFIG_XFS_FS is not set - # CONFIG_OCFS2_FS is not set - CONFIG_DNOTIFY=y -@@ -1100,6 +1137,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" - # - CONFIG_PROC_FS=y - CONFIG_PROC_SYSCTL=y -+CONFIG_PROC_PAGE_MONITOR=y - CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set -@@ -1148,6 +1186,7 @@ CONFIG_LOCKD_V4=y - CONFIG_NFS_COMMON=y - CONFIG_SUNRPC=y - CONFIG_SUNRPC_GSS=y -+# CONFIG_SUNRPC_REGISTER_V4 is not set - CONFIG_RPCSEC_GSS_KRB5=y - # CONFIG_RPCSEC_GSS_SPKM3 is not set - # CONFIG_SMB_FS is not set -@@ -1260,15 +1299,23 @@ CONFIG_DEBUG_INFO=y - CONFIG_FRAME_POINTER=y - # CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_RCU_CPU_STALL_DETECTOR is not set - # CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set - # CONFIG_FAULT_INJECTION is not set - # CONFIG_LATENCYTOP is not set --CONFIG_HAVE_FTRACE=y --CONFIG_HAVE_DYNAMIC_FTRACE=y --# CONFIG_FTRACE is not set -+CONFIG_HAVE_FUNCTION_TRACER=y -+ -+# -+# Tracers -+# -+# CONFIG_FUNCTION_TRACER is not set - # CONFIG_IRQSOFF_TRACER is not set - # CONFIG_SCHED_TRACER is not set - # CONFIG_CONTEXT_SWITCH_TRACER is not set -+# CONFIG_BOOT_TRACER is not set -+# CONFIG_STACK_TRACER is not set -+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set - # CONFIG_SAMPLES is not set - CONFIG_HAVE_ARCH_KGDB=y - # CONFIG_KGDB is not set -@@ -1282,14 +1329,19 @@ CONFIG_HAVE_ARCH_KGDB=y - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -+# CONFIG_SECURITYFS is not set - # CONFIG_SECURITY_FILE_CAPABILITIES is not set - CONFIG_CRYPTO=y - - # - # Crypto core or helper - # -+# CONFIG_CRYPTO_FIPS is not set - CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y - CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_RNG=y - CONFIG_CRYPTO_MANAGER=y - # CONFIG_CRYPTO_GF128MUL is not set - # CONFIG_CRYPTO_NULL is not set -@@ -1362,14 +1414,17 @@ CONFIG_CRYPTO_DES=y - # - # CONFIG_CRYPTO_DEFLATE is not set - # CONFIG_CRYPTO_LZO is not set -+ -+# -+# Random Number Generation -+# -+# CONFIG_CRYPTO_ANSI_CPRNG is not set - CONFIG_CRYPTO_HW=y - - # - # Library routines - # - CONFIG_BITREVERSE=y --# CONFIG_GENERIC_FIND_FIRST_BIT is not set --# CONFIG_GENERIC_FIND_NEXT_BIT is not set - CONFIG_CRC_CCITT=y - # CONFIG_CRC16 is not set - # CONFIG_CRC_T10DIF is not set --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0008-DSS-Hacked-N810-support.patch b/packages/linux/linux-omap/0008-DSS-Hacked-N810-support.patch new file mode 100644 index 0000000000..e2f21699b9 --- /dev/null +++ b/packages/linux/linux-omap/0008-DSS-Hacked-N810-support.patch @@ -0,0 +1,1076 @@ +From a36dfe9ce6faa6a13bb82b3039856d8aa1528dc2 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 18 Dec 2008 15:37:42 +0200 +Subject: [PATCH] DSS: Hacked N810 support + +--- + arch/arm/mach-omap2/board-n800.c | 214 ++++++++++++++--- + drivers/video/omap2/Kconfig | 10 + + drivers/video/omap2/Makefile | 3 + + drivers/video/omap2/ctrl-blizzard.c | 279 ++++++++++++++++++++++ + drivers/video/omap2/panel-n800.c | 437 +++++++++++++++++++++++++++++++++++ + 5 files changed, 905 insertions(+), 38 deletions(-) + create mode 100644 drivers/video/omap2/ctrl-blizzard.c + create mode 100644 drivers/video/omap2/panel-n800.c + +diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c +index b38b295..ffa5aad 100644 +--- a/arch/arm/mach-omap2/board-n800.c ++++ b/arch/arm/mach-omap2/board-n800.c +@@ -40,6 +40,7 @@ + #include + #include + #include ++#include + + #include <../drivers/cbus/tahvo.h> + #include <../drivers/media/video/tcm825x.h> +@@ -156,23 +157,175 @@ static struct omap_uart_config n800_uart_config __initdata = { + + #include "../../../drivers/cbus/retu.h" + +-static struct omap_fbmem_config n800_fbmem0_config __initdata = { +- .size = 752 * 1024, ++static struct omap_tmp105_config n800_tmp105_config __initdata = { ++ .tmp105_irq_pin = 125, ++ .set_power = n800_tmp105_set_power, + }; + +-static struct omap_fbmem_config n800_fbmem1_config __initdata = { +- .size = 752 * 1024, +-}; + +-static struct omap_fbmem_config n800_fbmem2_config __initdata = { +- .size = 752 * 1024, ++ ++ ++/* DISPLAY */ ++static struct { ++ struct clk *sys_ck; ++} blizzard; ++ ++static int blizzard_get_clocks(void) ++{ ++ blizzard.sys_ck = clk_get(0, "osc_ck"); ++ if (IS_ERR(blizzard.sys_ck)) { ++ printk(KERN_ERR "can't get Blizzard clock\n"); ++ return PTR_ERR(blizzard.sys_ck); ++ } ++ return 0; ++} ++ ++static unsigned long blizzard_get_clock_rate(void) ++{ ++ return clk_get_rate(blizzard.sys_ck); ++} ++ ++static int n800_pn800_enable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) { ++ printk("enabling panel gpio\n"); ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 1); ++ } ++ ++ return 0; ++} ++ ++static void n800_pn800_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) { ++ printk("disabling panel gpio\n"); ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 0); ++ msleep(120); ++ } ++} ++ ++static int n800_blizzard_enable(struct omap_display *display) ++{ ++ printk("enabling bliz powers\n"); ++ ++ /* Vcore to 1.475V */ ++ tahvo_set_clear_reg_bits(0x07, 0, 0xf); ++ msleep(10); ++ ++ clk_enable(blizzard.sys_ck); ++ ++ if (display->hw_config.ctrl_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.ctrl_reset_gpio, 1); ++ ++ printk("osc_ck %lu\n", blizzard_get_clock_rate()); ++ ++ return 0; ++} ++ ++static void n800_blizzard_disable(struct omap_display *display) ++{ ++ printk("disabling bliz powers\n"); ++ ++ if (display->hw_config.ctrl_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.ctrl_reset_gpio, 0); ++ ++ clk_disable(blizzard.sys_ck); ++ ++ /* Vcore to 1.005V */ ++ tahvo_set_clear_reg_bits(0x07, 0xf, 0); ++} ++ ++static int n800_set_backlight_level(struct omap_display *display, int level) ++{ ++ return 0; ++} ++ ++static struct omap_display_data n800_dsi_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DBI, ++ .name = "lcd", ++ .ctrl_name = "ctrl-blizzard", ++ .panel_name = "panel-pn800", ++ .panel_reset_gpio = -1, ++ .ctrl_reset_gpio = N800_BLIZZARD_POWERDOWN_GPIO, ++ .panel_enable = n800_pn800_enable, ++ .panel_disable = n800_pn800_disable, ++ .ctrl_enable = n800_blizzard_enable, ++ .ctrl_disable = n800_blizzard_disable, ++ .set_backlight = n800_set_backlight_level, ++ .u.rfbi = { ++ .channel = 0, ++ /* 8 for cmd mode, 16 for pixel data. ctrl-blizzard handles switching */ ++ .data_lines = 8, ++ }, ++ .priv = 0, // XXX used for panel datalines ++}; ++static struct omap_dss_platform_data n800_dss_data = { ++ .num_displays = 1, ++ .displays = { ++ &n800_dsi_display_data, ++ }, + }; + +-static struct omap_tmp105_config n800_tmp105_config __initdata = { +- .tmp105_irq_pin = 125, +- .set_power = n800_tmp105_set_power, ++static struct platform_device n800_dss_device = { ++ .name = "omap-dss", ++ .id = -1, ++ .dev = { ++ .platform_data = &n800_dss_data, ++ }, + }; + ++static void __init n800_display_init(void) ++{ ++ int r; ++ const struct omap_lcd_config *conf; ++ ++ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); ++ if (conf != NULL) { ++ n800_dsi_display_data.panel_reset_gpio = conf->nreset_gpio; ++ n800_dsi_display_data.priv = (void*)(u32)conf->data_lines; // XXX ++ //printk("\n\nTULI %d\n\n", conf->data_lines); ++ } else { ++ printk("\n\nEI TULLU MIOTÄÄÄ\n\n"); ++ } ++ ++ blizzard_get_clocks(); ++ clk_enable(blizzard.sys_ck); // XXX always enable ++ ++ //omapfb_set_ctrl_platform_data(&n800_blizzard_data); ++ // ++ if (n800_dsi_display_data.ctrl_reset_gpio != -1) { ++ r = gpio_request(n800_dsi_display_data.ctrl_reset_gpio, ++ "Blizzard pd"); ++ if (r < 0) { ++ n800_dsi_display_data.ctrl_reset_gpio = -1; ++ printk(KERN_ERR "Unable to get Blizzard GPIO\n"); ++ } else { ++ gpio_direction_output(n800_dsi_display_data.ctrl_reset_gpio, ++ 1); ++ // XXX always enable ++ } ++ } ++ ++ if (n800_dsi_display_data.panel_reset_gpio != -1) { ++ r = gpio_request(n800_dsi_display_data.panel_reset_gpio, ++ "panel reset"); ++ if (r < 0) { ++ n800_dsi_display_data.panel_reset_gpio = -1; ++ printk(KERN_ERR "Unable to get pn800 GPIO\n"); ++ } else { ++ gpio_direction_output(n800_dsi_display_data.panel_reset_gpio, ++ 1); ++ // XXX always enable ++ } ++ } ++} ++ ++/* DISPLAY END */ ++ ++ ++ ++ ++ + static void mipid_shutdown(struct mipid_platform_data *pdata) + { + if (pdata->nreset_gpio != -1) { +@@ -186,6 +339,7 @@ static struct mipid_platform_data n800_mipid_platform_data = { + .shutdown = mipid_shutdown, + }; + ++#if 0 + static void __init mipid_dev_init(void) + { + const struct omap_lcd_config *conf; +@@ -196,26 +350,9 @@ static void __init mipid_dev_init(void) + n800_mipid_platform_data.data_lines = conf->data_lines; + } + } ++#endif + +-static struct { +- struct clk *sys_ck; +-} blizzard; +- +-static int blizzard_get_clocks(void) +-{ +- blizzard.sys_ck = clk_get(0, "osc_ck"); +- if (IS_ERR(blizzard.sys_ck)) { +- printk(KERN_ERR "can't get Blizzard clock\n"); +- return PTR_ERR(blizzard.sys_ck); +- } +- return 0; +-} +- +-static unsigned long blizzard_get_clock_rate(struct device *dev) +-{ +- return clk_get_rate(blizzard.sys_ck); +-} +- ++#if 0 + static void blizzard_enable_clocks(int enable) + { + if (enable) +@@ -260,14 +397,12 @@ static void __init blizzard_dev_init(void) + gpio_direction_output(N800_BLIZZARD_POWERDOWN_GPIO, 1); + + blizzard_get_clocks(); +- omapfb_set_ctrl_platform_data(&n800_blizzard_data); ++ //omapfb_set_ctrl_platform_data(&n800_blizzard_data); + } ++#endif + + static struct omap_board_config_kernel n800_config[] __initdata = { + { OMAP_TAG_UART, &n800_uart_config }, +- { OMAP_TAG_FBMEM, &n800_fbmem0_config }, +- { OMAP_TAG_FBMEM, &n800_fbmem1_config }, +- { OMAP_TAG_FBMEM, &n800_fbmem2_config }, + { OMAP_TAG_TMP105, &n800_tmp105_config }, + }; + +@@ -374,7 +509,7 @@ static struct omap2_mcspi_device_config tsc2005_mcspi_config = { + + static struct spi_board_info n800_spi_board_info[] __initdata = { + { +- .modalias = "lcd_mipid", ++ .modalias = "panel-n800", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 4000000, +@@ -399,7 +534,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = { + + static struct spi_board_info n810_spi_board_info[] __initdata = { + { +- .modalias = "lcd_mipid", ++ .modalias = "panel-n800", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 4000000, +@@ -567,6 +702,7 @@ static struct platform_device *n800_devices[] __initdata = { + #if defined(CONFIG_CBUS_RETU) && defined(CONFIG_LEDS_OMAP_PWM) + &n800_keypad_led_device, + #endif ++ &n800_dss_device, + }; + + #ifdef CONFIG_MENELAUS +@@ -689,9 +825,10 @@ void __init nokia_n800_common_init(void) + if (machine_is_nokia_n810()) + i2c_register_board_info(2, n810_i2c_board_info_2, + ARRAY_SIZE(n810_i2c_board_info_2)); +- +- mipid_dev_init(); +- blizzard_dev_init(); ++ ++ //mipid_dev_init(); ++ //blizzard_dev_init(); ++ n800_display_init(); + } + + static void __init nokia_n800_init(void) +@@ -712,6 +849,7 @@ void __init nokia_n800_map_io(void) + omap_board_config_size = ARRAY_SIZE(n800_config); + + omap2_set_globals_242x(); ++ omap2_set_sdram_vram(800 * 480 * 2 * 3, 0); + omap2_map_common_io(); + } + +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +index b54c955..4e9211e 100644 +--- a/drivers/video/omap2/Kconfig ++++ b/drivers/video/omap2/Kconfig +@@ -49,4 +49,14 @@ config PANEL_SHARP_LS037V7DW01 + help + LCD Panel used in TI's SDP3430 and EVM boards + ++config PANEL_N800 ++ tristate "panel n800" ++ help ++ N800 LCD ++ ++config CTRL_BLIZZARD ++ tristate "blizzard ctrl" ++ help ++ Blizzard Ctrl ++ + endmenu +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +index fe6858e..7727f9c 100644 +--- a/drivers/video/omap2/Makefile ++++ b/drivers/video/omap2/Makefile +@@ -3,3 +3,6 @@ omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o + + obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o + obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o ++ ++obj-$(CONFIG_CTRL_BLIZZARD) += ctrl-blizzard.o ++obj-$(CONFIG_PANEL_N800) += panel-n800.o +diff --git a/drivers/video/omap2/ctrl-blizzard.c b/drivers/video/omap2/ctrl-blizzard.c +new file mode 100644 +index 0000000..e1e5569 +--- /dev/null ++++ b/drivers/video/omap2/ctrl-blizzard.c +@@ -0,0 +1,279 @@ ++ ++//#define DEBUG ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#ifdef DEBUG ++#define DBG(format, ...) printk(KERN_DEBUG "Blizzard: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define BLIZZARD_REV_CODE 0x00 ++#define BLIZZARD_CONFIG 0x02 ++#define BLIZZARD_PLL_DIV 0x04 ++#define BLIZZARD_PLL_LOCK_RANGE 0x06 ++#define BLIZZARD_PLL_CLOCK_SYNTH_0 0x08 ++#define BLIZZARD_PLL_CLOCK_SYNTH_1 0x0a ++#define BLIZZARD_PLL_MODE 0x0c ++#define BLIZZARD_CLK_SRC 0x0e ++#define BLIZZARD_MEM_BANK0_ACTIVATE 0x10 ++#define BLIZZARD_MEM_BANK0_STATUS 0x14 ++#define BLIZZARD_PANEL_CONFIGURATION 0x28 ++#define BLIZZARD_HDISP 0x2a ++#define BLIZZARD_HNDP 0x2c ++#define BLIZZARD_VDISP0 0x2e ++#define BLIZZARD_VDISP1 0x30 ++#define BLIZZARD_VNDP 0x32 ++#define BLIZZARD_HSW 0x34 ++#define BLIZZARD_VSW 0x38 ++#define BLIZZARD_DISPLAY_MODE 0x68 ++#define BLIZZARD_INPUT_WIN_X_START_0 0x6c ++#define BLIZZARD_DATA_SOURCE_SELECT 0x8e ++#define BLIZZARD_DISP_MEM_DATA_PORT 0x90 ++#define BLIZZARD_DISP_MEM_READ_ADDR0 0x92 ++#define BLIZZARD_POWER_SAVE 0xE6 ++#define BLIZZARD_NDISP_CTRL_STATUS 0xE8 ++ ++/* Data source select */ ++/* For S1D13745 */ ++#define BLIZZARD_SRC_WRITE_LCD_BACKGROUND 0x00 ++#define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE 0x01 ++#define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE 0x04 ++#define BLIZZARD_SRC_DISABLE_OVERLAY 0x05 ++/* For S1D13744 */ ++#define BLIZZARD_SRC_WRITE_LCD 0x00 ++#define BLIZZARD_SRC_BLT_LCD 0x06 ++ ++#define BLIZZARD_COLOR_RGB565 0x01 ++#define BLIZZARD_COLOR_YUV420 0x09 ++ ++#define BLIZZARD_VERSION_S1D13745 0x01 /* Hailstorm */ ++#define BLIZZARD_VERSION_S1D13744 0x02 /* Blizzard */ ++ ++#define BLIZZARD_AUTO_UPDATE_TIME (HZ / 20) ++ ++ ++ ++static struct { ++ int version; ++} blizzard; ++ ++ ++static inline void blizzard_cmd(u8 cmd) ++{ ++ omap_rfbi_write_command(&cmd, 1); ++} ++ ++static inline void blizzard_write(u8 cmd, const u8 *buf, int len) ++{ ++ omap_rfbi_write_command(&cmd, 1); ++ omap_rfbi_write_data(buf, len); ++} ++ ++static inline void blizzard_read(u8 cmd, u8 *buf, int len) ++{ ++ omap_rfbi_write_command(&cmd, 1); ++ omap_rfbi_read_data(buf, len); ++} ++ ++static u8 blizzard_read_reg(u8 cmd) ++{ ++ u8 data; ++ blizzard_read(cmd, &data, 1); ++ return data; ++} ++ ++static int blizzard_ctrl_init(struct omap_display *display) ++{ ++ DBG("blizzard_ctrl_init\n"); ++ ++ return 0; ++} ++ ++ ++static int blizzard_ctrl_enable(struct omap_display *display) ++{ ++ int r = 0; ++ u8 rev, conf; ++ ++ DBG("blizzard_ctrl_enable\n"); ++ ++ if (display->hw_config.ctrl_enable) { ++ r = display->hw_config.ctrl_enable(display); ++ if (r) ++ return r; ++ } ++ ++ msleep(100); ++ ++ rev = blizzard_read_reg(BLIZZARD_CLK_SRC); ++ printk("CLK_SRC %x\n", rev); ++ ++ rev = blizzard_read_reg(BLIZZARD_PLL_DIV); ++ printk("PLLDIV %x\n", rev); ++ ++ rev = blizzard_read_reg(BLIZZARD_REV_CODE); ++ conf = blizzard_read_reg(BLIZZARD_CONFIG); ++ ++ printk("rev %x, conf %x\n", rev, conf); ++ ++ switch (rev & 0xfc) { ++ case 0x9c: ++ blizzard.version = BLIZZARD_VERSION_S1D13744; ++ pr_info("omapfb: s1d13744 LCD controller rev %d " ++ "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07); ++ break; ++ case 0xa4: ++ blizzard.version = BLIZZARD_VERSION_S1D13745; ++ pr_info("omapfb: s1d13745 LCD controller rev %d " ++ "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07); ++ break; ++ default: ++ printk("invalid s1d1374x revision %02x\n", ++ rev); ++ r = -ENODEV; ++ } ++ ++ return r; ++} ++ ++static void blizzard_ctrl_disable(struct omap_display *display) ++{ ++ DBG("blizzard_ctrl_disable\n"); ++ ++ if (display->hw_config.ctrl_disable) ++ display->hw_config.ctrl_disable(display); ++} ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines); ++ ++static void blizzard_ctrl_setup_update(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ u8 tmp[18]; ++ int x_end, y_end; ++ ++ DBG("blizzard_ctrl_setup_update\n"); ++ ++ x_end = x + w - 1; ++ y_end = y + h - 1; ++ ++ tmp[0] = x; ++ tmp[1] = x >> 8; ++ tmp[2] = y; ++ tmp[3] = y >> 8; ++ tmp[4] = x_end; ++ tmp[5] = x_end >> 8; ++ tmp[6] = y_end; ++ tmp[7] = y_end >> 8; ++ ++ /* scaling? */ ++ tmp[8] = x; ++ tmp[9] = x >> 8; ++ tmp[10] = y; ++ tmp[11] = y >> 8; ++ tmp[12] = x_end; ++ tmp[13] = x_end >> 8; ++ tmp[14] = y_end; ++ tmp[15] = y_end >> 8; ++ ++ tmp[16] = BLIZZARD_COLOR_RGB565; //color_mode; ++ ++ if (blizzard.version == BLIZZARD_VERSION_S1D13745) ++ tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND; ++ else ++ tmp[17] = blizzard.version == BLIZZARD_VERSION_S1D13744 ? ++ BLIZZARD_SRC_WRITE_LCD : ++ BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE; ++ ++ rfbi_configure(display->hw_config.u.rfbi.channel, ++ 16, ++ 8); ++ ++ blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18); ++ ++ rfbi_configure(display->hw_config.u.rfbi.channel, ++ 16, ++ 16); ++} ++ ++static int blizzard_ctrl_enable_te(struct omap_display *display, int enable) ++{ ++ return 0; ++} ++ ++static int blizzard_ctrl_rotate(struct omap_display *display, int rotate) ++{ ++ return 0; ++} ++ ++static int blizzard_ctrl_mirror(struct omap_display *display, int enable) ++{ ++ return 0; ++} ++ ++static int blizzard_run_test(struct omap_display *display, int test_num) ++{ ++ return 0; ++} ++ ++static struct omap_ctrl blizzard_ctrl = { ++ .owner = THIS_MODULE, ++ .name = "ctrl-blizzard", ++ .init = blizzard_ctrl_init, ++ .enable = blizzard_ctrl_enable, ++ .disable = blizzard_ctrl_disable, ++ .setup_update = blizzard_ctrl_setup_update, ++ .enable_te = blizzard_ctrl_enable_te, ++ .rotate = blizzard_ctrl_rotate, ++ .mirror = blizzard_ctrl_mirror, ++ .run_test = blizzard_run_test, ++ .pixel_size = 16, ++ ++ .timings = { ++ .cs_on_time = 0, ++ ++ .we_on_time = 9000, ++ .we_off_time = 18000, ++ .we_cycle_time = 36000, ++ ++ .re_on_time = 9000, ++ .re_off_time = 27000, ++ .re_cycle_time = 36000, ++ ++ .access_time = 27000, ++ .cs_off_time = 36000, ++ ++ .cs_pulse_width = 0, ++ }, ++}; ++ ++ ++static int __init blizzard_init(void) ++{ ++ DBG("blizzard_init\n"); ++ omap_dss_register_ctrl(&blizzard_ctrl); ++ return 0; ++} ++ ++static void __exit blizzard_exit(void) ++{ ++ DBG("blizzard_exit\n"); ++ ++ omap_dss_unregister_ctrl(&blizzard_ctrl); ++} ++ ++module_init(blizzard_init); ++module_exit(blizzard_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("Blizzard Driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/panel-n800.c b/drivers/video/omap2/panel-n800.c +new file mode 100644 +index 0000000..3ae0a16 +--- /dev/null ++++ b/drivers/video/omap2/panel-n800.c +@@ -0,0 +1,437 @@ ++ ++/*#define DEBUG*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define MIPID_CMD_READ_DISP_ID 0x04 ++#define MIPID_CMD_READ_RED 0x06 ++#define MIPID_CMD_READ_GREEN 0x07 ++#define MIPID_CMD_READ_BLUE 0x08 ++#define MIPID_CMD_READ_DISP_STATUS 0x09 ++#define MIPID_CMD_RDDSDR 0x0F ++#define MIPID_CMD_SLEEP_IN 0x10 ++#define MIPID_CMD_SLEEP_OUT 0x11 ++#define MIPID_CMD_DISP_OFF 0x28 ++#define MIPID_CMD_DISP_ON 0x29 ++ ++#define MIPID_VER_LPH8923 3 ++#define MIPID_VER_LS041Y3 4 ++ ++#define MIPID_ESD_CHECK_PERIOD msecs_to_jiffies(5000) ++ ++#ifdef DEBUG ++#define DBG(format, ...) printk(KERN_DEBUG "PN800: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++struct pn800_device { ++ struct backlight_device *bl_dev; ++ int enabled; ++ int model; ++ int revision; ++ u8 display_id[3]; ++ unsigned int saved_bklight_level; ++ unsigned long hw_guard_end; /* next value of jiffies ++ when we can issue the ++ next sleep in/out command */ ++ unsigned long hw_guard_wait; /* max guard time in jiffies */ ++ ++ struct spi_device *spi; ++ struct mutex mutex; ++ struct omap_panel panel; ++ struct omap_display *display; ++}; ++ ++ ++static void pn800_transfer(struct pn800_device *md, int cmd, ++ const u8 *wbuf, int wlen, u8 *rbuf, int rlen) ++{ ++ struct spi_message m; ++ struct spi_transfer *x, xfer[4]; ++ u16 w; ++ int r; ++ ++ BUG_ON(md->spi == NULL); ++ ++ spi_message_init(&m); ++ ++ memset(xfer, 0, sizeof(xfer)); ++ x = &xfer[0]; ++ ++ cmd &= 0xff; ++ x->tx_buf = &cmd; ++ x->bits_per_word = 9; ++ x->len = 2; ++ spi_message_add_tail(x, &m); ++ ++ if (wlen) { ++ x++; ++ x->tx_buf = wbuf; ++ x->len = wlen; ++ x->bits_per_word = 9; ++ spi_message_add_tail(x, &m); ++ } ++ ++ if (rlen) { ++ x++; ++ x->rx_buf = &w; ++ x->len = 1; ++ spi_message_add_tail(x, &m); ++ ++ if (rlen > 1) { ++ /* Arrange for the extra clock before the first ++ * data bit. ++ */ ++ x->bits_per_word = 9; ++ x->len = 2; ++ ++ x++; ++ x->rx_buf = &rbuf[1]; ++ x->len = rlen - 1; ++ spi_message_add_tail(x, &m); ++ } ++ } ++ ++ r = spi_sync(md->spi, &m); ++ if (r < 0) ++ dev_dbg(&md->spi->dev, "spi_sync %d\n", r); ++ ++ if (rlen) ++ rbuf[0] = w & 0xff; ++} ++ ++static inline void pn800_cmd(struct pn800_device *md, int cmd) ++{ ++ pn800_transfer(md, cmd, NULL, 0, NULL, 0); ++} ++ ++static inline void pn800_write(struct pn800_device *md, ++ int reg, const u8 *buf, int len) ++{ ++ pn800_transfer(md, reg, buf, len, NULL, 0); ++} ++ ++static inline void pn800_read(struct pn800_device *md, ++ int reg, u8 *buf, int len) ++{ ++ pn800_transfer(md, reg, NULL, 0, buf, len); ++} ++ ++static void set_data_lines(struct pn800_device *md, int data_lines) ++{ ++ u16 par; ++ ++ switch (data_lines) { ++ case 16: ++ par = 0x150; ++ break; ++ case 18: ++ par = 0x160; ++ break; ++ case 24: ++ par = 0x170; ++ break; ++ } ++ pn800_write(md, 0x3a, (u8 *)&par, 2); ++} ++ ++static void send_init_string(struct pn800_device *md) ++{ ++ u16 initpar[] = { 0x0102, 0x0100, 0x0100 }; ++ int data_lines; ++ ++ pn800_write(md, 0xc2, (u8 *)initpar, sizeof(initpar)); ++ ++ data_lines = (int)md->display->hw_config.priv; // XXX ++ ++ set_data_lines(md, data_lines); ++} ++ ++static void hw_guard_start(struct pn800_device *md, int guard_msec) ++{ ++ md->hw_guard_wait = msecs_to_jiffies(guard_msec); ++ md->hw_guard_end = jiffies + md->hw_guard_wait; ++} ++ ++static void hw_guard_wait(struct pn800_device *md) ++{ ++ unsigned long wait = md->hw_guard_end - jiffies; ++ ++ if ((long)wait > 0 && wait <= md->hw_guard_wait) { ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ schedule_timeout(wait); ++ } ++} ++ ++static void set_sleep_mode(struct pn800_device *md, int on) ++{ ++ int cmd, sleep_time = 50; ++ ++ if (on) ++ cmd = MIPID_CMD_SLEEP_IN; ++ else ++ cmd = MIPID_CMD_SLEEP_OUT; ++ hw_guard_wait(md); ++ pn800_cmd(md, cmd); ++ hw_guard_start(md, 120); ++ /* ++ * When we enable the panel, it seems we _have_ to sleep ++ * 120 ms before sending the init string. When disabling the ++ * panel we'll sleep for the duration of 2 frames, so that the ++ * controller can still provide the PCLK,HS,VS signals. */ ++ if (!on) ++ sleep_time = 120; ++ msleep(sleep_time); ++} ++ ++static void set_display_state(struct pn800_device *md, int enabled) ++{ ++ int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF; ++ ++ pn800_cmd(md, cmd); ++} ++ ++static int panel_enabled(struct pn800_device *md) ++{ ++ u32 disp_status; ++ int enabled; ++ ++ pn800_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4); ++ disp_status = __be32_to_cpu(disp_status); ++ enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10)); ++ dev_dbg(&md->spi->dev, ++ "LCD panel %s enabled by bootloader (status 0x%04x)\n", ++ enabled ? "" : "not ", disp_status); ++ DBG("status %#08x\n", disp_status); ++ return enabled; ++} ++ ++static int panel_detect(struct pn800_device *md) ++{ ++ pn800_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3); ++ dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n", ++ md->display_id[0], md->display_id[1], md->display_id[2]); ++ ++ switch (md->display_id[0]) { ++ case 0x45: ++ md->model = MIPID_VER_LPH8923; ++ md->panel.name = "lph8923"; ++ break; ++ case 0x83: ++ md->model = MIPID_VER_LS041Y3; ++ md->panel.name = "ls041y3"; ++ //md->esd_check = ls041y3_esd_check; ++ break; ++ default: ++ md->panel.name = "unknown"; ++ dev_err(&md->spi->dev, "invalid display ID\n"); ++ return -ENODEV; ++ } ++ ++ md->revision = md->display_id[1]; ++ pr_info("omapfb: %s rev %02x LCD detected\n", ++ md->panel.name, md->revision); ++ ++ return 0; ++} ++ ++ ++ ++static int pn800_panel_enable(struct omap_display *display) ++{ ++ int r; ++ struct pn800_device *md = ++ (struct pn800_device *)display->panel->priv; ++ ++ DBG("pn800_panel_enable\n"); ++ ++ mutex_lock(&md->mutex); ++ ++ if (display->hw_config.panel_enable) ++ display->hw_config.panel_enable(display); ++ ++ msleep(50); // wait for power up ++ ++ r = panel_detect(md); ++ if (r) { ++ mutex_unlock(&md->mutex); ++ return r; ++ } ++ ++ md->enabled = panel_enabled(md); ++ ++ if (md->enabled) { ++ DBG("panel already enabled\n"); ++ ; /*pn800_esd_start_check(md);*/ ++ } else { ++ ; /*md->saved_bklight_level = pn800_get_bklight_level(panel);*/ ++ } ++ ++ ++ if (md->enabled) { ++ mutex_unlock(&md->mutex); ++ return 0; ++ } ++ ++ set_sleep_mode(md, 0); ++ md->enabled = 1; ++ send_init_string(md); ++ set_display_state(md, 1); ++ //mipid_set_bklight_level(panel, md->saved_bklight_level); ++ //mipid_esd_start_check(md); ++ ++ mutex_unlock(&md->mutex); ++ return 0; ++} ++ ++static void pn800_panel_disable(struct omap_display *display) ++{ ++ struct pn800_device *md = ++ (struct pn800_device *)display->panel->priv; ++ ++ DBG("pn800_panel_disable\n"); ++ ++ mutex_lock(&md->mutex); ++ ++ if (!md->enabled) { ++ mutex_unlock(&md->mutex); ++ return; ++ } ++ /*md->saved_bklight_level = pn800_get_bklight_level(panel);*/ ++ /*pn800_set_bklight_level(panel, 0);*/ ++ ++ set_display_state(md, 0); ++ set_sleep_mode(md, 1); ++ md->enabled = 0; ++ ++ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ ++ mutex_unlock(&md->mutex); ++} ++ ++static int pn800_panel_init(struct omap_display *display) ++{ ++ struct pn800_device *md = ++ (struct pn800_device *)display->panel->priv; ++ ++ DBG("pn800_panel_init\n"); ++ ++ mutex_init(&md->mutex); ++ md->display = display; ++ ++ return 0; ++} ++ ++static int pn800_run_test(struct omap_display *display, int test_num) ++{ ++ return 0; ++} ++ ++static struct omap_panel pn800_panel = { ++ .owner = THIS_MODULE, ++ .name = "panel-pn800", ++ .init = pn800_panel_init, ++ /*.remove = pn800_cleanup,*/ ++ .enable = pn800_panel_enable, ++ .disable = pn800_panel_disable, ++ //.set_mode = pn800_set_mode, ++ .run_test = pn800_run_test, ++ ++ .timings = { ++ .x_res = 800, ++ .y_res = 480, ++ ++ .pixel_clock = 21940, ++ .hsw = 50, ++ .hfp = 20, ++ .hbp = 15, ++ ++ .vsw = 2, ++ .vfp = 1, ++ .vbp = 3, ++ }, ++ .config = OMAP_DSS_LCD_TFT, ++ ++ .bpp = 16, ++}; ++ ++static int pn800_spi_probe(struct spi_device *spi) ++{ ++ struct pn800_device *md; ++ ++ DBG("pn800_spi_probe\n"); ++ ++ md = kzalloc(sizeof(*md), GFP_KERNEL); ++ if (md == NULL) { ++ dev_err(&spi->dev, "out of memory\n"); ++ return -ENOMEM; ++ } ++ ++ spi->mode = SPI_MODE_0; ++ md->spi = spi; ++ dev_set_drvdata(&spi->dev, md); ++ md->panel = pn800_panel; ++ pn800_panel.priv = md; ++ ++ omap_dss_register_panel(&pn800_panel); ++ ++ return 0; ++} ++ ++static int pn800_spi_remove(struct spi_device *spi) ++{ ++ struct pn800_device *md = dev_get_drvdata(&spi->dev); ++ ++ DBG("pn800_spi_remove\n"); ++ ++ omap_dss_unregister_panel(&pn800_panel); ++ ++ /*pn800_disable(&md->panel);*/ ++ kfree(md); ++ ++ return 0; ++} ++ ++static struct spi_driver pn800_spi_driver = { ++ .driver = { ++ .name = "panel-n800", ++ .bus = &spi_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ .probe = pn800_spi_probe, ++ .remove = __devexit_p(pn800_spi_remove), ++}; ++ ++static int __init pn800_init(void) ++{ ++ DBG("pn800_init\n"); ++ return spi_register_driver(&pn800_spi_driver); ++} ++ ++static void __exit pn800_exit(void) ++{ ++ DBG("pn800_exit\n"); ++ spi_unregister_driver(&pn800_spi_driver); ++} ++ ++module_init(pn800_init); ++module_exit(pn800_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("N800 LCD Driver"); ++MODULE_LICENSE("GPL"); +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0009-DSS-OMAPFB-allocate-fbmem-only-for-fb0-or-if-spes.patch b/packages/linux/linux-omap/0009-DSS-OMAPFB-allocate-fbmem-only-for-fb0-or-if-spes.patch new file mode 100644 index 0000000000..89174909a0 --- /dev/null +++ b/packages/linux/linux-omap/0009-DSS-OMAPFB-allocate-fbmem-only-for-fb0-or-if-spes.patch @@ -0,0 +1,121 @@ +From bd4fd1dd3be7ff31a6cf779f0683d617280ac92e Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 7 Jan 2009 16:44:17 +0200 +Subject: [PATCH] DSS: OMAPFB: allocate fbmem only for fb0, or if spesified in vram arg + +--- + drivers/video/omap2/omapfb-main.c | 65 +++++++++++++++++++----------------- + 1 files changed, 34 insertions(+), 31 deletions(-) + +diff --git a/drivers/video/omap2/omapfb-main.c b/drivers/video/omap2/omapfb-main.c +index 76bd416..9dbff42 100644 +--- a/drivers/video/omap2/omapfb-main.c ++++ b/drivers/video/omap2/omapfb-main.c +@@ -939,11 +939,12 @@ static int omapfb_alloc_fbmem_display(struct omapfb2_device *fbdev, int fbnum, + break; + } + +- size = display->panel->timings.x_res * display->panel->timings.y_res * +- bytespp; +- +- if (def_vram > size) ++ if (def_vram) + size = def_vram; ++ else ++ size = display->panel->timings.x_res * ++ display->panel->timings.y_res * ++ bytespp; + + return omapfb_alloc_fbmem(fbdev, fbnum, size); + } +@@ -956,13 +957,25 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) + memset(vrams, 0, sizeof(vrams)); + + if (def_vram) { +- char *p = def_vram; ++ char str[64]; ++ char *tok, *s; ++ ++ if (strlen(def_vram) > sizeof(str) - 1) { ++ dev_err(fbdev->dev, "Illegal vram parameters\n"); ++ return -EINVAL; ++ } ++ ++ strcpy(str, def_vram); ++ ++ s = str; + i = 0; + +- while (true) { ++ while ((tok = strsep(&s, ","))) { + unsigned long size; + +- size = memparse(p, &p); ++ printk("param '%s'\n", tok); ++ ++ size = memparse(tok, NULL); + + if (size == 0) { + dev_err(fbdev->dev, "illegal vram size\n"); +@@ -970,19 +983,18 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) + } + + vrams[i++] = size; +- +- if (*p != ',') +- break; +- +- p++; + } + } + + for (i = 0; i < fbdev->num_fbs; i++) { +- r = omapfb_alloc_fbmem_display(fbdev, i, vrams[i]); ++ /* allocate memory automatically only for fb0, or if ++ * excplicitly defined with vram option */ ++ if (i == 0 || vrams[i] != 0) { ++ r = omapfb_alloc_fbmem_display(fbdev, i, vrams[i]); + +- if (r) +- return r; ++ if (r) ++ return r; ++ } + } + + for (i = 0; i < fbdev->num_fbs; i++) { +@@ -1167,24 +1179,15 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) + dev_err(fbdev->dev, "failed to change mode\n"); + } + +- /* Enable the first framebuffer that has overlay that is connected +- * to display. Usually this would be the GFX plane. */ +- r = 0; +- for (i = 0; i < fbdev->num_fbs; i++) { +- struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); +- int t; ++ /* Enable fb0 */ ++ if (fbdev->num_fbs > 0) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]); + +- for (t = 0; t < ofbi->num_overlays; t++) { +- struct omap_overlay *ovl = ofbi->overlays[t]; +- if (ovl->manager && ovl->manager->display) { +- ovl->enable(ovl, 1); +- r = 1; +- break; +- } +- } ++ if (ofbi->num_overlays > 0 ) { ++ struct omap_overlay *ovl = ofbi->overlays[0]; + +- if (r) +- break; ++ ovl->enable(ovl, 1); ++ } + } + + DBG("create_framebuffers done\n"); +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0009-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch b/packages/linux/linux-omap/0009-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch deleted file mode 100644 index aeba95e1f5..0000000000 --- a/packages/linux/linux-omap/0009-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch +++ /dev/null @@ -1,155 +0,0 @@ -From b4718ad31fb4ba43e7f3058b42f3c7c01ee1596a Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Fri, 14 Nov 2008 15:47:19 +0200 -Subject: [PATCH] DSS: Sharp LS037V7DW01 LCD Panel driver - -Signed-off-by: Tomi Valkeinen ---- - drivers/video/omap2/Kconfig | 7 ++- - drivers/video/omap2/Makefile | 1 + - drivers/video/omap2/panel-sharp-ls037v7dw01.c | 108 +++++++++++++++++++++++++ - 3 files changed, 115 insertions(+), 1 deletions(-) - create mode 100644 drivers/video/omap2/panel-sharp-ls037v7dw01.c - -diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig -index ab6a5fc..392f251 100644 ---- a/drivers/video/omap2/Kconfig -+++ b/drivers/video/omap2/Kconfig -@@ -57,5 +57,10 @@ config PANEL_DVI_1280X1024 - - endchoice - --endmenu -+config PANEL_SHARP_LS037V7DW01 -+ tristate "Sharp LS037V7DW01 LCD Panel" -+ depends on OMAP2_DSS -+ help -+ LCD Panel used in TI's SDP3430 and EVM boards - -+endmenu -diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile -index 7c75340..b86dd0b 100644 ---- a/drivers/video/omap2/Makefile -+++ b/drivers/video/omap2/Makefile -@@ -2,3 +2,4 @@ obj-$(CONFIG_FB_OMAP2) += omapfb.o - omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o - - obj-$(CONFIG_PANEL_DVI) += panel-dvi.o -+obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o -diff --git a/drivers/video/omap2/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/panel-sharp-ls037v7dw01.c -new file mode 100644 -index 0000000..b4270df ---- /dev/null -+++ b/drivers/video/omap2/panel-sharp-ls037v7dw01.c -@@ -0,0 +1,108 @@ -+/* -+ * LCD panel driver for Sharp LS037V7DW01 -+ * -+ * Copyright (C) 2008 Nokia Corporation -+ * Author: Tomi Valkeinen -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#include -+#include -+ -+#include -+ -+static int sharp_ls_panel_init(struct omap_display *display) -+{ -+ return 0; -+} -+ -+static void sharp_ls_panel_cleanup(struct omap_display *display) -+{ -+} -+ -+static int sharp_ls_panel_enable(struct omap_display *display) -+{ -+ int r = 0; -+ -+ if (display->hw_config.panel_enable) -+ r = display->hw_config.panel_enable(display); -+ -+ return r; -+} -+ -+static void sharp_ls_panel_disable(struct omap_display *display) -+{ -+ if (display->hw_config.panel_disable) -+ display->hw_config.panel_disable(display); -+} -+ -+static int sharp_ls_panel_suspend(struct omap_display *display) -+{ -+ sharp_ls_panel_disable(display); -+ return 0; -+} -+ -+static int sharp_ls_panel_resume(struct omap_display *display) -+{ -+ return sharp_ls_panel_enable(display); -+} -+ -+static struct omap_panel sharp_ls_panel = { -+ .owner = THIS_MODULE, -+ .name = "sharp-ls037v7dw01", -+ .init = sharp_ls_panel_init, -+ .cleanup = sharp_ls_panel_cleanup, -+ .enable = sharp_ls_panel_enable, -+ .disable = sharp_ls_panel_disable, -+ .suspend = sharp_ls_panel_suspend, -+ .resume = sharp_ls_panel_resume, -+ /*.set_mode = sharp_ls_set_mode, */ -+ -+ .timings = { -+ .pixel_clock = 19200, -+ -+ .hsw = 2, -+ .hfp = 1, -+ .hbp = 28, -+ -+ .vsw = 1, -+ .vfp = 1, -+ .vbp = 1, -+ }, -+ -+ .acb = 0x28, -+ -+ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | -+ OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC, -+ -+ .x_res = 480, -+ .y_res = 640, -+ .bpp = 16, -+}; -+ -+ -+static int __init sharp_ls_panel_drv_init(void) -+{ -+ omap_dss_register_panel(&sharp_ls_panel); -+ return 0; -+} -+ -+static void __exit sharp_ls_panel_drv_exit(void) -+{ -+ omap_dss_unregister_panel(&sharp_ls_panel); -+} -+ -+module_init(sharp_ls_panel_drv_init); -+module_exit(sharp_ls_panel_drv_exit); -+MODULE_LICENSE("GPL"); --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0009-DSS-support-for-OMAP3-SDP-board.patch b/packages/linux/linux-omap/0009-DSS-support-for-OMAP3-SDP-board.patch deleted file mode 100644 index b632a46a49..0000000000 --- a/packages/linux/linux-omap/0009-DSS-support-for-OMAP3-SDP-board.patch +++ /dev/null @@ -1,261 +0,0 @@ -From 782177389d60fd3e5444d0a8ecf4f73343ca7e1d Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Fri, 14 Nov 2008 15:47:55 +0200 -Subject: [PATCH] DSS: Support for OMAP3 SDP board - -Signed-off-by: Tomi Valkeinen ---- - arch/arm/mach-omap2/board-3430sdp.c | 210 +++++++++++++++++++++++++++++++++-- - 1 files changed, 201 insertions(+), 9 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c -index ade186b..725b2d9 100644 ---- a/arch/arm/mach-omap2/board-3430sdp.c -+++ b/arch/arm/mach-omap2/board-3430sdp.c -@@ -39,6 +39,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -238,14 +239,209 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { - }, - }; - --static struct platform_device sdp3430_lcd_device = { -- .name = "sdp2430_lcd", -- .id = -1, -+ -+#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 -+#define SDP2430_LCD_PANEL_ENABLE_GPIO 154 -+#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24 -+#define SDP3430_LCD_PANEL_ENABLE_GPIO 28 -+ -+#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER -+#define ENABLE_VAUX2_DEDICATED 0x09 -+#define ENABLE_VAUX2_DEV_GRP 0x20 -+#define ENABLE_VAUX3_DEDICATED 0x03 -+#define ENABLE_VAUX3_DEV_GRP 0x20 -+ -+#define ENABLE_VPLL2_DEDICATED 0x05 -+#define ENABLE_VPLL2_DEV_GRP 0xE0 -+#define TWL4030_VPLL2_DEV_GRP 0x33 -+#define TWL4030_VPLL2_DEDICATED 0x36 -+ -+#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) -+ -+static unsigned backlight_gpio; -+static unsigned enable_gpio; -+static int lcd_enabled; -+static int dvi_enabled; -+ -+static void __init sdp3430_display_init(void) -+{ -+ int r; -+ -+ enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; -+ backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; -+ -+ r = gpio_request(enable_gpio, "LCD reset"); -+ if (r) { -+ printk(KERN_ERR "failed to get LCD reset GPIO\n"); -+ goto err0; -+ } -+ -+ r = gpio_request(backlight_gpio, "LCD Backlight"); -+ if (r) { -+ printk(KERN_ERR "failed to get LCD backlight GPIO\n"); -+ goto err1; -+ } -+ -+ gpio_direction_output(enable_gpio, 0); -+ gpio_direction_output(backlight_gpio, 0); -+ -+ return; -+err1: -+ gpio_free(enable_gpio); -+err0: -+ return; -+} -+ -+ -+static int sdp3430_panel_enable_lcd(struct omap_display *display) -+{ -+ u8 ded_val, ded_reg; -+ u8 grp_val, grp_reg; -+ -+ if (dvi_enabled) { -+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); -+ return -EINVAL; -+ } -+ -+ if (omap_rev() > OMAP3430_REV_ES1_0) { -+ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED, -+ TWL4030_VPLL2_DEDICATED); -+ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP, -+ TWL4030_VPLL2_DEV_GRP); -+ } -+ -+ ded_reg = TWL4030_VAUX3_DEDICATED; -+ ded_val = ENABLE_VAUX3_DEDICATED; -+ grp_reg = TWL4030_VAUX3_DEV_GRP; -+ grp_val = ENABLE_VAUX3_DEV_GRP; -+ -+ gpio_direction_output(enable_gpio, 1); -+ gpio_direction_output(backlight_gpio, 1); -+ -+ if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg)) -+ return -EIO; -+ if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg)) -+ return -EIO; -+ -+ lcd_enabled = 1; -+ -+ return 0; -+} -+ -+static void sdp3430_panel_disable_lcd(struct omap_display *display) -+{ -+ lcd_enabled = 0; -+ -+ gpio_direction_output(enable_gpio, 0); -+ gpio_direction_output(backlight_gpio, 0); -+ -+ if (omap_rev() > OMAP3430_REV_ES1_0) { -+ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED); -+ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP); -+ mdelay(4); -+ } -+} -+ -+static struct omap_display_data sdp3430_display_data = { -+ .type = OMAP_DISPLAY_TYPE_DPI, -+ .name = "lcd", -+ .panel_name = "sharp-ls037v7dw01", -+ .u.dpi.data_lines = 16, -+ .panel_enable = sdp3430_panel_enable_lcd, -+ .panel_disable = sdp3430_panel_disable_lcd, -+}; -+ -+static int sdp3430_panel_enable_dvi(struct omap_display *display) -+{ -+ if (lcd_enabled) { -+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); -+ return -EINVAL; -+ } -+ -+ if (omap_rev() > OMAP3430_REV_ES1_0) { -+ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED, -+ TWL4030_VPLL2_DEDICATED); -+ t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP, -+ TWL4030_VPLL2_DEV_GRP); -+ } -+ -+ dvi_enabled = 1; -+ -+ return 0; -+} -+ -+static void sdp3430_panel_disable_dvi(struct omap_display *display) -+{ -+ dvi_enabled = 0; -+ -+ if (omap_rev() > OMAP3430_REV_ES1_0) { -+ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED); -+ t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP); -+ mdelay(4); -+ } -+} -+ -+ -+static struct omap_display_data sdp3430_display_data_dvi = { -+ .type = OMAP_DISPLAY_TYPE_DPI, -+ .name = "dvi", -+ .panel_name = "panel-dvi", -+ .u.dpi.data_lines = 24, -+ .panel_enable = sdp3430_panel_enable_dvi, -+ .panel_disable = sdp3430_panel_disable_dvi, -+}; -+ -+static int sdp3430_panel_enable_tv(struct omap_display *display) -+{ -+#define ENABLE_VDAC_DEDICATED 0x03 -+#define ENABLE_VDAC_DEV_GRP 0x20 -+ -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, -+ ENABLE_VDAC_DEDICATED, -+ TWL4030_VDAC_DEDICATED); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, -+ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); -+ -+ return 0; -+} -+ -+static void sdp3430_panel_disable_tv(struct omap_display *display) -+{ -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, -+ TWL4030_VDAC_DEDICATED); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, -+ TWL4030_VDAC_DEV_GRP); -+} -+ -+static struct omap_display_data sdp3430_display_data_tv = { -+ .type = OMAP_DISPLAY_TYPE_VENC, -+ .name = "tv", -+ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, -+ .panel_enable = sdp3430_panel_enable_tv, -+ .panel_disable = sdp3430_panel_disable_tv, - }; - -+static struct omap_dss_platform_data sdp3430_dss_data = { -+ .num_displays = 3, -+ .displays = { -+ &sdp3430_display_data, -+ &sdp3430_display_data_dvi, -+ &sdp3430_display_data_tv, -+ } -+}; -+ -+static struct platform_device sdp3430_dss_device = { -+ .name = "omap-dss", -+ .id = -1, -+ .dev = { -+ .platform_data = &sdp3430_dss_data, -+ }, -+}; -+ -+ - static struct platform_device *sdp3430_devices[] __initdata = { - &sdp3430_smc91x_device, -- &sdp3430_lcd_device, -+ &sdp3430_dss_device, - }; - - static inline void __init sdp3430_init_smc91x(void) -@@ -292,13 +488,8 @@ static struct omap_uart_config sdp3430_uart_config __initdata = { - .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), - }; - --static struct omap_lcd_config sdp3430_lcd_config __initdata = { -- .ctrl_name = "internal", --}; -- - static struct omap_board_config_kernel sdp3430_config[] __initdata = { - { OMAP_TAG_UART, &sdp3430_uart_config }, -- { OMAP_TAG_LCD, &sdp3430_lcd_config }, - }; - - static int sdp3430_batt_table[] = { -@@ -481,6 +672,7 @@ static void __init omap_3430sdp_init(void) - usb_musb_init(); - usb_ehci_init(); - twl4030_mmc_init(mmc); -+ sdp3430_display_init(); - } - - static void __init omap_3430sdp_map_io(void) --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0010-DSS-OMAPFB-remove-extra-omapfb_setup_overlay-call.patch b/packages/linux/linux-omap/0010-DSS-OMAPFB-remove-extra-omapfb_setup_overlay-call.patch new file mode 100644 index 0000000000..c5ce980772 --- /dev/null +++ b/packages/linux/linux-omap/0010-DSS-OMAPFB-remove-extra-omapfb_setup_overlay-call.patch @@ -0,0 +1,29 @@ +From 70c3edb223f7bfbc6c5b095826c779b7dd853f10 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 7 Jan 2009 17:00:46 +0200 +Subject: [PATCH] OMAPFB: remove extra omapfb_setup_overlay call + +It kinda messed things up... +--- + drivers/video/omap2/omapfb-ioctl.c | 5 ----- + 1 files changed, 0 insertions(+), 5 deletions(-) + +diff --git a/drivers/video/omap2/omapfb-ioctl.c b/drivers/video/omap2/omapfb-ioctl.c +index 1f0f044..bb5f791 100644 +--- a/drivers/video/omap2/omapfb-ioctl.c ++++ b/drivers/video/omap2/omapfb-ioctl.c +@@ -67,11 +67,6 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) + goto out; + } + +- r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y, +- pi->out_width, pi->out_height); +- if (r) +- goto out; +- + ovl->enable(ovl, pi->enabled); + + if (ovl->manager) +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0011-DSS-OMAPFB-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch b/packages/linux/linux-omap/0011-DSS-OMAPFB-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch new file mode 100644 index 0000000000..8d4165ac7a --- /dev/null +++ b/packages/linux/linux-omap/0011-DSS-OMAPFB-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch @@ -0,0 +1,27 @@ +From 36d6e7edd70d16ad57ed745a1c48694805035dc7 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 7 Jan 2009 17:17:08 +0200 +Subject: [PATCH] OMAPFB: fix GFX_SYNC to be compatible with DSS1 + +DSS1 never returned an error from GFX_SYNC ioctl. So we neither. +--- + drivers/video/omap2/omapfb-ioctl.c | 3 ++- + 1 files changed, 2 insertions(+), 1 deletions(-) + +diff --git a/drivers/video/omap2/omapfb-ioctl.c b/drivers/video/omap2/omapfb-ioctl.c +index bb5f791..0cb0370 100644 +--- a/drivers/video/omap2/omapfb-ioctl.c ++++ b/drivers/video/omap2/omapfb-ioctl.c +@@ -314,7 +314,8 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) + switch (cmd) { + case OMAPFB_SYNC_GFX: + if (!display || !display->sync) { +- r = -EINVAL; ++ /* DSS1 never returns an error here, so we neither */ ++ /*r = -EINVAL;*/ + break; + } + +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0011-DSS-Support-for-OMAP3-EVM-board.patch b/packages/linux/linux-omap/0011-DSS-Support-for-OMAP3-EVM-board.patch deleted file mode 100644 index 6fa9a7fbf7..0000000000 --- a/packages/linux/linux-omap/0011-DSS-Support-for-OMAP3-EVM-board.patch +++ /dev/null @@ -1,288 +0,0 @@ -From 722267d4a82e6f502f08e252d12563f5ce07a744 Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Fri, 14 Nov 2008 16:03:34 +0200 -Subject: [PATCH] DSS: Support for OMAP3 EVM board - -Coded by Vaibhav Hiremath - -Signed-off-by: Tomi Valkeinen ---- - arch/arm/mach-omap2/board-omap3evm.c | 224 ++++++++++++++++++++++++++++++++-- - 1 files changed, 215 insertions(+), 9 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c -index e4e60e2..7756dd8 100644 ---- a/arch/arm/mach-omap2/board-omap3evm.c -+++ b/arch/arm/mach-omap2/board-omap3evm.c -@@ -36,6 +36,8 @@ - #include - #include - #include -+#include -+#include - - #include "sdram-micron-mt46h32m32lf-6.h" - #include "twl4030-generic-scripts.h" -@@ -159,14 +161,215 @@ static int __init omap3_evm_i2c_init(void) - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; - } -+static struct omap_fbmem_config evm_fbmem0_config = { -+ .size = 480*720*4, -+ .start = OMAPFB_MEMTYPE_SDRAM, -+}; - --static struct platform_device omap3_evm_lcd_device = { -- .name = "omap3evm_lcd", -- .id = -1, -+static struct omap_fbmem_config evm_fbmem1_config = { -+ .size = 480*720*4, -+ .start = OMAPFB_MEMTYPE_SDRAM, - }; - --static struct omap_lcd_config omap3_evm_lcd_config __initdata = { -- .ctrl_name = "internal", -+static struct omap_fbmem_config evm_fbmem2_config = { -+ .size = 480*720*4, -+ .start = OMAPFB_MEMTYPE_SDRAM, -+}; -+#define LCD_PANEL_LR 2 -+#define LCD_PANEL_UD 3 -+#define LCD_PANEL_INI 152 -+#define LCD_PANEL_ENABLE_GPIO 153 -+#define LCD_PANEL_QVGA 154 -+#define LCD_PANEL_RESB 155 -+ -+#define ENABLE_VDAC_DEDICATED 0x03 -+#define ENABLE_VDAC_DEV_GRP 0x20 -+#define ENABLE_VPLL2_DEDICATED 0x05 -+#define ENABLE_VPLL2_DEV_GRP 0xE0 -+ -+#define TWL4030_GPIODATA_IN3 0x03 -+#define TWL4030_GPIODATA_DIR3 0x06 -+#define TWL4030_VPLL2_DEV_GRP 0x33 -+#define TWL4030_VPLL2_DEDICATED 0x36 -+ -+static int lcd_enabled; -+static int dvi_enabled; -+ -+static void __init evm_display_init(void) -+{ -+ int r; -+ r = gpio_request(LCD_PANEL_LR, "lcd_panel_lr"); -+ if (r) { -+ printk(KERN_ERR "failed to get LCD_PANEL_LR\n"); -+ return; -+ } -+ r = gpio_request(LCD_PANEL_UD, "lcd_panel_ud"); -+ if (r) { -+ printk(KERN_ERR "failed to get LCD_PANEL_UD\n"); -+ goto err_1; -+ } -+ -+ r = gpio_request(LCD_PANEL_INI, "lcd_panel_ini"); -+ if (r) { -+ printk(KERN_ERR "failed to get LCD_PANEL_INI\n"); -+ goto err_2; -+ } -+ r = gpio_request(LCD_PANEL_RESB, "lcd_panel_resb"); -+ if (r) { -+ printk(KERN_ERR "failed to get LCD_PANEL_RESB\n"); -+ goto err_3; -+ } -+ r = gpio_request(LCD_PANEL_QVGA, "lcd_panel_qvga"); -+ if (r) { -+ printk(KERN_ERR "failed to get LCD_PANEL_QVGA\n"); -+ goto err_4; -+ } -+ -+ gpio_direction_output(LCD_PANEL_LR, 0); -+ gpio_direction_output(LCD_PANEL_UD, 0); -+ gpio_direction_output(LCD_PANEL_INI, 0); -+ gpio_direction_output(LCD_PANEL_RESB, 0); -+ gpio_direction_output(LCD_PANEL_QVGA, 0); -+ -+#define TWL_LED_LEDEN 0x00 -+#define TWL_PWMA_PWMAON 0x00 -+#define TWL_PWMA_PWMAOFF 0x01 -+ -+ twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); -+ -+ gpio_direction_output(LCD_PANEL_RESB, 1); -+ gpio_direction_output(LCD_PANEL_INI, 1); -+ gpio_direction_output(LCD_PANEL_QVGA, 0); -+ gpio_direction_output(LCD_PANEL_LR, 1); -+ gpio_direction_output(LCD_PANEL_UD, 1); -+ -+ return; -+ -+err_4: -+ gpio_free(LCD_PANEL_RESB); -+err_3: -+ gpio_free(LCD_PANEL_INI); -+err_2: -+ gpio_free(LCD_PANEL_UD); -+err_1: -+ gpio_free(LCD_PANEL_LR); -+ -+} -+ -+static int evm_panel_enable_lcd(struct omap_display *display) -+{ -+ if (dvi_enabled) { -+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); -+ return -EINVAL; -+ } -+ if (omap_rev() > OMAP3430_REV_ES1_0) { -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, -+ ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, -+ ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); -+ } -+ gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); -+ lcd_enabled = 1; -+ return 0; -+} -+ -+static void evm_panel_disable_lcd(struct omap_display *display) -+{ -+ if (omap_rev() > OMAP3430_REV_ES1_0) { -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, -+ TWL4030_VPLL2_DEDICATED); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, -+ TWL4030_VPLL2_DEV_GRP); -+ } -+ gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); -+ lcd_enabled = 0; -+} -+ -+static struct omap_display_data evm_display_data = { -+ .type = OMAP_DISPLAY_TYPE_DPI, -+ .name = "lcd", -+ .panel_name = "sharp-ls037v7dw01", -+ .u.dpi.data_lines = 18, -+ .panel_enable = evm_panel_enable_lcd, -+ .panel_disable = evm_panel_disable_lcd, -+}; -+ -+static int evm_panel_enable_tv(struct omap_display *display) -+{ -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, -+ ENABLE_VDAC_DEDICATED, TWL4030_VDAC_DEDICATED); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, -+ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); -+ return 0; -+} -+ -+static void evm_panel_disable_tv(struct omap_display *display) -+{ -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, -+ TWL4030_VDAC_DEDICATED); -+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, -+ TWL4030_VDAC_DEV_GRP); -+} -+ -+static struct omap_display_data evm_display_data_tv = { -+ .type = OMAP_DISPLAY_TYPE_VENC, -+ .name = "tv", -+ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, -+ .panel_enable = evm_panel_enable_tv, -+ .panel_disable = evm_panel_disable_tv, -+}; -+ -+ -+static int evm_panel_enable_dvi(struct omap_display *display) -+{ -+ if (lcd_enabled) { -+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); -+ return -EINVAL; -+ } -+ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, -+ TWL4030_GPIODATA_IN3); -+ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, -+ TWL4030_GPIODATA_DIR3); -+ dvi_enabled = 1; -+ -+ return 0; -+} -+ -+static void evm_panel_disable_dvi(struct omap_display *display) -+{ -+ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, -+ TWL4030_GPIODATA_IN3); -+ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, -+ TWL4030_GPIODATA_DIR3); -+ dvi_enabled = 0; -+} -+ -+ -+static struct omap_display_data evm_display_data_dvi = { -+ .type = OMAP_DISPLAY_TYPE_DPI, -+ .name = "dvi", -+ .panel_name = "panel-dvi", -+ .u.dpi.data_lines = 24, -+ .panel_enable = evm_panel_enable_dvi, -+ .panel_disable = evm_panel_disable_dvi, -+}; -+ -+static struct omap_dss_platform_data evm_dss_data = { -+ .num_displays = 3, -+ .displays = { -+ &evm_display_data, -+ &evm_display_data_dvi, -+ &evm_display_data_tv, -+ } -+}; -+static struct platform_device evm_dss_device = { -+ .name = "omap-dss", -+ .id = -1, -+ .dev = { -+ .platform_data = &evm_dss_data, -+ }, - }; - - static void ads7846_dev_init(void) -@@ -225,11 +428,13 @@ static void __init omap3_evm_init_irq(void) - - static struct omap_board_config_kernel omap3_evm_config[] __initdata = { - { OMAP_TAG_UART, &omap3_evm_uart_config }, -- { OMAP_TAG_LCD, &omap3_evm_lcd_config }, -+ { OMAP_TAG_FBMEM, &evm_fbmem0_config }, -+ { OMAP_TAG_FBMEM, &evm_fbmem1_config }, -+ { OMAP_TAG_FBMEM, &evm_fbmem2_config }, - }; - - static struct platform_device *omap3_evm_devices[] __initdata = { -- &omap3_evm_lcd_device, -+ &evm_dss_device, - &omap3evm_smc911x_device, - }; - -@@ -248,8 +453,6 @@ static void __init omap3_evm_init(void) - omap3_evm_i2c_init(); - - platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); -- omap_board_config = omap3_evm_config; -- omap_board_config_size = ARRAY_SIZE(omap3_evm_config); - - spi_register_board_info(omap3evm_spi_board_info, - ARRAY_SIZE(omap3evm_spi_board_info)); -@@ -260,10 +463,13 @@ static void __init omap3_evm_init(void) - usb_ehci_init(); - omap3evm_flash_init(); - ads7846_dev_init(); -+ evm_display_init(); - } - - static void __init omap3_evm_map_io(void) - { -+ omap_board_config = omap3_evm_config; -+ omap_board_config_size = ARRAY_SIZE(omap3_evm_config); - omap2_set_globals_343x(); - omap2_map_common_io(); - } --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0012-DSS-Add-comments-to-FAKE_VSYNC-to-make-things-more.patch b/packages/linux/linux-omap/0012-DSS-Add-comments-to-FAKE_VSYNC-to-make-things-more.patch new file mode 100644 index 0000000000..85e7952c8d --- /dev/null +++ b/packages/linux/linux-omap/0012-DSS-Add-comments-to-FAKE_VSYNC-to-make-things-more.patch @@ -0,0 +1,27 @@ +From 942267b679b7f60b33e034ee29e313925cfbcae0 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 7 Jan 2009 17:20:24 +0200 +Subject: [PATCH] DSS: Add comments to FAKE_VSYNC to make things more clear + +--- + arch/arm/plat-omap/dss/Kconfig | 4 +++- + 1 files changed, 3 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/plat-omap/dss/Kconfig b/arch/arm/plat-omap/dss/Kconfig +index 6b342df..f0b1f1c 100644 +--- a/arch/arm/plat-omap/dss/Kconfig ++++ b/arch/arm/plat-omap/dss/Kconfig +@@ -46,7 +46,9 @@ config OMAP2_DSS_FAKE_VSYNC + default n + help + If this is selected, DSI will fake a DISPC VSYNC interrupt +- when DSI has sent a frame. ++ when DSI has sent a frame. This is only needed with DSI or ++ RFBI displays using manual mode, and you want VSYNC to time, ++ for example, animation. + + config OMAP2_DSS_MIN_FCK_PER_PCK + int "Minimum FCK/PCK ratio (for scaling)" +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0012-DSS-OMAPFB-PAGE_ALIGN-sizes-in-mem-alloc.patch b/packages/linux/linux-omap/0012-DSS-OMAPFB-PAGE_ALIGN-sizes-in-mem-alloc.patch deleted file mode 100644 index 47976563cd..0000000000 --- a/packages/linux/linux-omap/0012-DSS-OMAPFB-PAGE_ALIGN-sizes-in-mem-alloc.patch +++ /dev/null @@ -1,36 +0,0 @@ -From aebae68fd82a47e5d7c83176cf14720559300e2b Mon Sep 17 00:00:00 2001 -From: Tomi Valkeinen -Date: Mon, 15 Dec 2008 14:33:11 +0200 -Subject: [PATCH] DSS: OMAPFB: PAGE_ALIGN sizes in mem alloc - -Sizes in omapfb region struct were not page aligned, and that caused -mmap to fail. ---- - drivers/video/omap2/omapfb-main.c | 4 ++++ - 1 files changed, 4 insertions(+), 0 deletions(-) - -diff --git a/drivers/video/omap2/omapfb-main.c b/drivers/video/omap2/omapfb-main.c -index 89ad631..bca0e28 100644 ---- a/drivers/video/omap2/omapfb-main.c -+++ b/drivers/video/omap2/omapfb-main.c -@@ -874,6 +874,8 @@ static int omapfb_alloc_fbmem(struct omapfb2_device *fbdev, int fbnum, - unsigned long paddr; - void *vaddr; - -+ size = PAGE_ALIGN(size); -+ - ofbi = FB2OFB(fbdev->fbs[fbnum]); - rg = &ofbi->region; - memset(rg, 0, sizeof(*rg)); -@@ -906,6 +908,8 @@ int omapfb_realloc_fbmem(struct omapfb2_device *fbdev, int fbnum, - unsigned old_size = rg->size; - int r; - -+ size = PAGE_ALIGN(size); -+ - omapfb_free_fbmem(fbdev, fbnum); - - if (size == 0) --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0013-DSS-OMAPFB-remove-extra-spaces.patch b/packages/linux/linux-omap/0013-DSS-OMAPFB-remove-extra-spaces.patch new file mode 100644 index 0000000000..fac269a319 --- /dev/null +++ b/packages/linux/linux-omap/0013-DSS-OMAPFB-remove-extra-spaces.patch @@ -0,0 +1,25 @@ +From 17f3d30a218efba9bf947a667c9c1fa2f4286794 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 7 Jan 2009 17:40:59 +0200 +Subject: [PATCH] OMAPFB: remove extra spaces + +--- + drivers/video/omap2/omapfb-sysfs.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/video/omap2/omapfb-sysfs.c b/drivers/video/omap2/omapfb-sysfs.c +index 4383e44..0e153b9 100644 +--- a/drivers/video/omap2/omapfb-sysfs.c ++++ b/drivers/video/omap2/omapfb-sysfs.c +@@ -337,7 +337,7 @@ static ssize_t show_overlays(struct device *dev, struct device_attribute *attr, + break; + + l += snprintf(buf + l, size - l, +- "%s t:%s x:%d y:%d iw:%d ih:%d w: %d h: %d e:%d\n", ++ "%s t:%s x:%d y:%d iw:%d ih:%d w:%d h:%d e:%d\n", + ovl->name, + mgr ? mgr->name : "none", + ovl->info.pos_x, +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap/0013-Refreshed-and-Cleaned-up-as-per-the-latest-Tomi-s-DS.patch b/packages/linux/linux-omap/0013-Refreshed-and-Cleaned-up-as-per-the-latest-Tomi-s-DS.patch deleted file mode 100644 index 68b5dce723..0000000000 --- a/packages/linux/linux-omap/0013-Refreshed-and-Cleaned-up-as-per-the-latest-Tomi-s-DS.patch +++ /dev/null @@ -1,222 +0,0 @@ -From 0eb1facf382b7654f28222a2a41c3d029bcd7965 Mon Sep 17 00:00:00 2001 -From: Vaibhav Hiremath -Date: Mon, 15 Dec 2008 14:52:08 +0200 -Subject: [PATCH] Refreshed and Cleaned up as per the latest Tomi's DSS2 - code-base - - -http://www.bat.org/~tomba/git/linux-omap-dss.git - -Tomi, - -Can you please merge this patch to your repository, so -that it will be available as part of your HEAD? - -Signed-off-by: Brijesh Jadav -Signed-off-by: Hardik Shah -Signed-off-by: Manjunath Hadli -Signed-off-by: R Sivaraj -Signed-off-by: Vaibhav Hiremath ---- - arch/arm/mach-omap2/board-omap3evm.c | 69 +++++++++++++--------------------- - 1 files changed, 26 insertions(+), 43 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c -index 0a722d7..cf0a6b3 100644 ---- a/arch/arm/mach-omap2/board-omap3evm.c -+++ b/arch/arm/mach-omap2/board-omap3evm.c -@@ -36,7 +36,6 @@ - #include - #include - #include --#include - #include - - #include "sdram-micron-mt46h32m32lf-6.h" -@@ -161,20 +160,7 @@ static int __init omap3_evm_i2c_init(void) - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; - } --static struct omap_fbmem_config evm_fbmem0_config = { -- .size = 480*720*4, -- .start = OMAPFB_MEMTYPE_SDRAM, --}; -- --static struct omap_fbmem_config evm_fbmem1_config = { -- .size = 480*720*4, -- .start = OMAPFB_MEMTYPE_SDRAM, --}; - --static struct omap_fbmem_config evm_fbmem2_config = { -- .size = 480*720*4, -- .start = OMAPFB_MEMTYPE_SDRAM, --}; - #define LCD_PANEL_LR 2 - #define LCD_PANEL_UD 3 - #define LCD_PANEL_INI 152 -@@ -195,7 +181,7 @@ static struct omap_fbmem_config evm_fbmem2_config = { - static int lcd_enabled; - static int dvi_enabled; - --static void __init evm_display_init(void) -+static void __init omap3_evm_display_init(void) - { - int r; - r = gpio_request(LCD_PANEL_LR, "lcd_panel_lr"); -@@ -258,7 +244,7 @@ err_1: - - } - --static int evm_panel_enable_lcd(struct omap_display *display) -+static int omap3_evm_panel_enable_lcd(struct omap_display *display) - { - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); -@@ -275,7 +261,7 @@ static int evm_panel_enable_lcd(struct omap_display *display) - return 0; - } - --static void evm_panel_disable_lcd(struct omap_display *display) -+static void omap3_evm_panel_disable_lcd(struct omap_display *display) - { - if (omap_rev() > OMAP3430_REV_ES1_0) { - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, -@@ -287,16 +273,16 @@ static void evm_panel_disable_lcd(struct omap_display *display) - lcd_enabled = 0; - } - --static struct omap_display_data evm_display_data = { -+static struct omap_display_data omap3_evm_display_data = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "lcd", - .panel_name = "sharp-ls037v7dw01", - .u.dpi.data_lines = 18, -- .panel_enable = evm_panel_enable_lcd, -- .panel_disable = evm_panel_disable_lcd, -+ .panel_enable = omap3_evm_panel_enable_lcd, -+ .panel_disable = omap3_evm_panel_disable_lcd, - }; - --static int evm_panel_enable_tv(struct omap_display *display) -+static int omap3_evm_panel_enable_tv(struct omap_display *display) - { - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - ENABLE_VDAC_DEDICATED, TWL4030_VDAC_DEDICATED); -@@ -305,7 +291,7 @@ static int evm_panel_enable_tv(struct omap_display *display) - return 0; - } - --static void evm_panel_disable_tv(struct omap_display *display) -+static void omap3_evm_panel_disable_tv(struct omap_display *display) - { - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, - TWL4030_VDAC_DEDICATED); -@@ -313,16 +299,16 @@ static void evm_panel_disable_tv(struct omap_display *display) - TWL4030_VDAC_DEV_GRP); - } - --static struct omap_display_data evm_display_data_tv = { -+static struct omap_display_data omap3_evm_display_data_tv = { - .type = OMAP_DISPLAY_TYPE_VENC, - .name = "tv", - .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, -- .panel_enable = evm_panel_enable_tv, -- .panel_disable = evm_panel_disable_tv, -+ .panel_enable = omap3_evm_panel_enable_tv, -+ .panel_disable = omap3_evm_panel_disable_tv, - }; - - --static int evm_panel_enable_dvi(struct omap_display *display) -+static int omap3_evm_panel_enable_dvi(struct omap_display *display) - { - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); -@@ -337,7 +323,7 @@ static int evm_panel_enable_dvi(struct omap_display *display) - return 0; - } - --static void evm_panel_disable_dvi(struct omap_display *display) -+static void omap3_evm_panel_disable_dvi(struct omap_display *display) - { - twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, - TWL4030_GPIODATA_IN3); -@@ -347,28 +333,28 @@ static void evm_panel_disable_dvi(struct omap_display *display) - } - - --static struct omap_display_data evm_display_data_dvi = { -+static struct omap_display_data omap3_evm_display_data_dvi = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .panel_name = "panel-dvi", - .u.dpi.data_lines = 24, -- .panel_enable = evm_panel_enable_dvi, -- .panel_disable = evm_panel_disable_dvi, -+ .panel_enable = omap3_evm_panel_enable_dvi, -+ .panel_disable = omap3_evm_panel_disable_dvi, - }; - --static struct omap_dss_platform_data evm_dss_data = { -+static struct omap_dss_platform_data omap3_evm_dss_data = { - .num_displays = 3, - .displays = { -- &evm_display_data, -- &evm_display_data_dvi, -- &evm_display_data_tv, -+ &omap3_evm_display_data, -+ &omap3_evm_display_data_dvi, -+ &omap3_evm_display_data_tv, - } - }; --static struct platform_device evm_dss_device = { -+static struct platform_device omap3_evm_dss_device = { - .name = "omap-dss", - .id = -1, - .dev = { -- .platform_data = &evm_dss_data, -+ .platform_data = &omap3_evm_dss_data, - }, - }; - -@@ -428,13 +414,10 @@ static void __init omap3_evm_init_irq(void) - - static struct omap_board_config_kernel omap3_evm_config[] __initdata = { - { OMAP_TAG_UART, &omap3_evm_uart_config }, -- { OMAP_TAG_FBMEM, &evm_fbmem0_config }, -- { OMAP_TAG_FBMEM, &evm_fbmem1_config }, -- { OMAP_TAG_FBMEM, &evm_fbmem2_config }, - }; - - static struct platform_device *omap3_evm_devices[] __initdata = { -- &evm_dss_device, -+ &omap3_evm_dss_device, - &omap3evm_smc911x_device, - }; - -@@ -453,6 +436,8 @@ static void __init omap3_evm_init(void) - omap3_evm_i2c_init(); - - platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); -+ omap_board_config = omap3_evm_config; -+ omap_board_config_size = ARRAY_SIZE(omap3_evm_config); - - spi_register_board_info(omap3evm_spi_board_info, - ARRAY_SIZE(omap3evm_spi_board_info)); -@@ -463,13 +448,11 @@ static void __init omap3_evm_init(void) - usb_ehci_init(); - omap3evm_flash_init(); - ads7846_dev_init(); -- evm_display_init(); -+ omap3_evm_display_init(); - } - - static void __init omap3_evm_map_io(void) - { -- omap_board_config = omap3_evm_config; -- omap_board_config_size = ARRAY_SIZE(omap3_evm_config); - omap2_set_globals_343x(); - omap2_map_common_io(); - } --- -1.5.6.3 - diff --git a/packages/linux/linux-omap/0014-DSS-fix-clk_get_usecount.patch b/packages/linux/linux-omap/0014-DSS-fix-clk_get_usecount.patch new file mode 100644 index 0000000000..a935709a9e --- /dev/null +++ b/packages/linux/linux-omap/0014-DSS-fix-clk_get_usecount.patch @@ -0,0 +1,67 @@ +From ba234fff55f8a1ef96b57ce2e18ab90df76f2c82 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 8 Jan 2009 12:01:39 +0200 +Subject: [PATCH] DSS: fix clk_get_usecount + +--- + arch/arm/plat-omap/dss/dss.c | 12 ++++++------ + 1 files changed, 6 insertions(+), 6 deletions(-) + +diff --git a/arch/arm/plat-omap/dss/dss.c b/arch/arm/plat-omap/dss/dss.c +index 4a403c1..b9f35d8 100644 +--- a/arch/arm/plat-omap/dss/dss.c ++++ b/arch/arm/plat-omap/dss/dss.c +@@ -236,7 +236,7 @@ ssize_t dss_print_clocks(char *buf, ssize_t size) + l += snprintf(buf + l, size - l, "%-15s\t%lu\t%d\n", + clocks[i]->name, + clk_get_rate(clocks[i]), +- clk_get_usecount(clocks[i])); ++ clocks[i]->usecount); + } + + return l; +@@ -590,28 +590,28 @@ void dss_exit(void) + free_irq(INT_24XX_DSS_IRQ, NULL); + + /* these should be removed at some point */ +- c = clk_get_usecount(dss.dss_ick); ++ c = dss.dss_ick->usecount; + if (c > 0) { + DSSERR("warning: dss_ick usecount %d, disabling\n", c); + while (c-- > 0) + clk_disable(dss.dss_ick); + } + +- c = clk_get_usecount(dss.dss1_fck); ++ c = dss.dss1_fck->usecount; + if (c > 0) { + DSSERR("warning: dss1_fck usecount %d, disabling\n", c); + while (c-- > 0) + clk_disable(dss.dss1_fck); + } + +- c = clk_get_usecount(dss.dss2_fck); ++ c = dss.dss2_fck->usecount; + if (c > 0) { + DSSERR("warning: dss2_fck usecount %d, disabling\n", c); + while (c-- > 0) + clk_disable(dss.dss2_fck); + } + +- c = clk_get_usecount(dss.dss_54m_fck); ++ c = dss.dss_54m_fck->usecount; + if (c > 0) { + DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c); + while (c-- > 0) +@@ -619,7 +619,7 @@ void dss_exit(void) + } + + if (dss.dss_96m_fck) { +- c = clk_get_usecount(dss.dss_96m_fck); ++ c = dss.dss_96m_fck->usecount; + if (c > 0) { + DSSERR("warning: dss_96m_fck usecount %d, disabling\n", + c); +-- +1.5.6.3 + diff --git a/packages/linux/linux-omap_git.bb b/packages/linux/linux-omap_git.bb index c1f164a1db..f18829d6d3 100644 --- a/packages/linux/linux-omap_git.bb +++ b/packages/linux/linux-omap_git.bb @@ -10,11 +10,11 @@ DEFAULT_PREFERENCE_omap3evm = "1" DEFAULT_PREFERENCE_omap3-pandora = "1" -SRCREV = "401b285465488f515290e0f9111872b94e1cf922" +SRCREV = "e8b22165f8af8cf9827d6c3e1279c17a457efb08" #PV = "2.6.27+2.6.28-rc8+${PR}+gitr${SRCREV}" -PV = "2.6.28" -PR = "r1" +PV = "2.6.28+gitr${SRCREV}" +PR = "r3" SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \ file://defconfig" @@ -33,18 +33,22 @@ SRC_URI_append = " \ file://dvb-fix-dma.diff;patch=1 \ file://0001-Removed-resolution-check-that-prevents-scaling-when.patch;patch=1 \ file://0001-Implement-downsampling-with-debugs.patch;patch=1 \ - file://0003-DSS-Documentation-for-OMAP2-3-display-subsystem.patch;patch=1 \ - file://0004-DSS-New-display-subsystem-driver-for-OMAP2-3.patch;patch=1 \ - file://0005-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch;patch=1 \ - file://0006-DSS-Add-generic-DVI-panel.patch;patch=1 \ - file://0007-DSS-support-for-Beagle-Board.patch;patch=1 \ - file://0008-DSS-BEAGLE-Enable-DSS-in-beagle-defconfig.patch;patch=1 \ - file://0009-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch;patch=1 \ - file://0011-DSS-Support-for-OMAP3-EVM-board.patch;patch=1 \ - file://0012-DSS-OMAPFB-PAGE_ALIGN-sizes-in-mem-alloc.patch;patch=1 \ - file://0013-Refreshed-and-Cleaned-up-as-per-the-latest-Tomi-s-DS.patch;patch=1 \ file://twl-asoc-fix-record.diff;patch=1 \ file://tick-schedc-suppress-needless-timer-reprogramming.patch;patch=1 \ + file://0001-DSS-New-display-subsystem-driver-for-OMAP2-3.patch;patch=1 \ + file://0002-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch;patch=1 \ + file://0003-DSS-Add-generic-DVI-panel.patch;patch=1 \ + file://0004-DSS-support-for-Beagle-Board.patch;patch=1 \ + file://0005-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch;patch=1 \ + file://0006-DSS-Support-for-OMAP3-SDP-board.patch;patch=1 \ + file://0007-DSS-Support-for-OMAP3-EVM-board.patch;patch=1 \ + file://0008-DSS-Hacked-N810-support.patch;patch=1 \ + file://0009-DSS-OMAPFB-allocate-fbmem-only-for-fb0-or-if-spes.patch;patch=1 \ + file://0010-DSS-OMAPFB-remove-extra-omapfb_setup_overlay-call.patch;patch=1 \ + file://0011-DSS-OMAPFB-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch;patch=1 \ + file://0012-DSS-Add-comments-to-FAKE_VSYNC-to-make-things-more.patch;patch=1 \ + file://0013-DSS-OMAPFB-remove-extra-spaces.patch;patch=1 \ + file://0014-DSS-fix-clk_get_usecount.patch;patch=1 \ " -- cgit 1.2.3-korg