This patch adds MMC/SD support to the S3C2410 SoC code in u-boot Signed-off-by: Harald Welte Index: u-boot/cpu/arm920t/s3c24x0/Makefile =================================================================== --- u-boot.orig/cpu/arm920t/s3c24x0/Makefile +++ u-boot/cpu/arm920t/s3c24x0/Makefile @@ -26,7 +26,7 @@ LIB = $(obj)lib$(SOC).a COBJS = i2c.o interrupts.o serial.o speed.o \ - usb_ohci.o nand_read.o nand.o cmd_s3c2410.o + usb_ohci.o nand_read.o nand.o mmc.o cmd_s3c2410.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) Index: u-boot/cpu/arm920t/s3c24x0/mmc.c =================================================================== --- /dev/null +++ u-boot/cpu/arm920t/s3c24x0/mmc.c @@ -0,0 +1,531 @@ +/* + * u-boot S3C2410 MMC/SD card driver + * (C) Copyright 2006 by Openmoko, Inc. + * Author: Harald Welte + * + * based on u-boot pxa MMC driver and linux/drivers/mmc/s3c2410mci.c + * (C) 2005-2005 Thomas Kleffel + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MMC + +#define CONFIG_MMC_WIDE + +static S3C2410_SDI *sdi; + +static block_dev_desc_t mmc_dev; + +block_dev_desc_t * mmc_get_dev(int dev) +{ + return ((block_dev_desc_t *)&mmc_dev); +} + +/* + * FIXME needs to read cid and csd info to determine block size + * and other parameters + */ +static uchar mmc_buf[MMC_BLOCK_SIZE]; +static mmc_csd_t mmc_csd; +static int mmc_ready = 0; +static int wide = 0; + + +#define CMD_F_RESP 0x01 +#define CMD_F_RESP_LONG 0x02 + +static u_int32_t *mmc_cmd(ushort cmd, ulong arg, ushort flags) +{ + static u_int32_t resp[5]; + + u_int32_t ccon, csta; + u_int32_t csta_rdy_bit = S3C2410_SDICMDSTAT_CMDSENT; + + memset(resp, 0, sizeof(resp)); + + debug("mmc_cmd CMD%d arg=0x%08x flags=%x\n", cmd, arg, flags); + + sdi->SDICSTA = 0xffffffff; + sdi->SDIDSTA = 0xffffffff; + sdi->SDIFSTA = 0xffffffff; + + sdi->SDICARG = arg; + + ccon = cmd & S3C2410_SDICMDCON_INDEX; + ccon |= S3C2410_SDICMDCON_SENDERHOST|S3C2410_SDICMDCON_CMDSTART; + + if (flags & CMD_F_RESP) { + ccon |= S3C2410_SDICMDCON_WAITRSP; + csta_rdy_bit = S3C2410_SDICMDSTAT_RSPFIN; /* 1 << 9 */ + } + + if (flags & CMD_F_RESP_LONG) + ccon |= S3C2410_SDICMDCON_LONGRSP; + + sdi->SDICCON = ccon; + + while (1) { + csta = sdi->SDICSTA; + if (csta & csta_rdy_bit) + break; + if (csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { + printf("===============> MMC CMD Timeout\n"); + sdi->SDICSTA |= S3C2410_SDICMDSTAT_CMDTIMEOUT; + break; + } + } + + debug("final MMC CMD status 0x%x\n", csta); + + sdi->SDICSTA |= csta_rdy_bit; + + if (flags & CMD_F_RESP) { + resp[0] = sdi->SDIRSP0; + resp[1] = sdi->SDIRSP1; + resp[2] = sdi->SDIRSP2; + resp[3] = sdi->SDIRSP3; + } + + return resp; +} + +#define FIFO_FILL(host) ((host->SDIFSTA & S3C2410_SDIFSTA_COUNTMASK) >> 2) + +static int mmc_block_read(uchar *dst, ulong src, ulong len) +{ + u_int32_t dcon, fifo; + u_int32_t *dst_u32 = (u_int32_t *)dst; + u_int32_t *resp; + + if (len == 0) + return 0; + + debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len); + + /* set block len */ + resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, len, CMD_F_RESP); + sdi->SDIBSIZE = len; + + //sdi->SDIPRE = 0xff; + + /* setup data */ + dcon = (len >> 9) & S3C2410_SDIDCON_BLKNUM; + dcon |= S3C2410_SDIDCON_BLOCKMODE; + dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART; + if (wide) + dcon |= S3C2410_SDIDCON_WIDEBUS; + sdi->SDIDCON = dcon; + + /* send read command */ + resp = mmc_cmd(MMC_CMD_READ_BLOCK, src, CMD_F_RESP); + + while (len > 0) { + u_int32_t sdidsta = sdi->SDIDSTA; + fifo = FIFO_FILL(sdi); + if (sdidsta & (S3C2410_SDIDSTA_FIFOFAIL| + S3C2410_SDIDSTA_CRCFAIL| + S3C2410_SDIDSTA_RXCRCFAIL| + S3C2410_SDIDSTA_DATATIMEOUT)) { + printf("mmc_block_read: err SDIDSTA=0x%08x\n", sdidsta); + return -EIO; + } + + while (fifo--) { + //debug("dst_u32 = 0x%08x\n", dst_u32); + *(dst_u32++) = sdi->SDIDAT; + if (len >= 4) + len -= 4; + else { + len = 0; + break; + } + } + } + + debug("waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); + while (!(sdi->SDIDSTA & (1 << 4))) {} + debug("done waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); + + sdi->SDIDCON = 0; + + if (!(sdi->SDIDSTA & S3C2410_SDIDSTA_XFERFINISH)) + debug("mmc_block_read; transfer not finished!\n"); + + return 0; +} + +static int mmc_block_write(ulong dst, uchar *src, int len) +{ + printf("MMC block write not yet supported on S3C2410!\n"); + return -1; +} + + +int mmc_read(ulong src, uchar *dst, int size) +{ + ulong end, part_start, part_end, part_len, aligned_start, aligned_end; + ulong mmc_block_size, mmc_block_address; + + if (size == 0) + return 0; + + if (!mmc_ready) { + printf("Please initialize the MMC first\n"); + return -1; + } + + mmc_block_size = MMC_BLOCK_SIZE; + mmc_block_address = ~(mmc_block_size - 1); + + src -= CFG_MMC_BASE; + end = src + size; + part_start = ~mmc_block_address & src; + part_end = ~mmc_block_address & end; + aligned_start = mmc_block_address & src; + aligned_end = mmc_block_address & end; + + /* all block aligned accesses */ + debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if (part_start) { + part_len = mmc_block_size - part_start; + debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) + return -1; + + memcpy(dst, mmc_buf+part_start, part_len); + dst += part_len; + src += part_len; + } + debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) { + debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) + return -1; + } + debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if (part_end && src < end) { + debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) + return -1; + + memcpy(dst, mmc_buf, part_end); + } + return 0; +} + +int mmc_write(uchar *src, ulong dst, int size) +{ + ulong end, part_start, part_end, part_len, aligned_start, aligned_end; + ulong mmc_block_size, mmc_block_address; + + if (size == 0) + return 0; + + if (!mmc_ready) { + printf("Please initialize the MMC first\n"); + return -1; + } + + mmc_block_size = MMC_BLOCK_SIZE; + mmc_block_address = ~(mmc_block_size - 1); + + dst -= CFG_MMC_BASE; + end = dst + size; + part_start = ~mmc_block_address & dst; + part_end = ~mmc_block_address & end; + aligned_start = mmc_block_address & dst; + aligned_end = mmc_block_address & end; + + /* all block aligned accesses */ + debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if (part_start) { + part_len = mmc_block_size - part_start; + debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end); + if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) + return -1; + + memcpy(mmc_buf+part_start, src, part_len); + if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) + return -1; + + dst += part_len; + src += part_len; + } + debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) { + debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) + return -1; + + } + debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if (part_end && dst < end) { + debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", + src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); + if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) + return -1; + + memcpy(mmc_buf, src, part_end); + if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) + return -1; + + } + return 0; +} + +ulong mmc_bread(int dev_num, ulong blknr, ulong blkcnt, void *dst) +{ + int mmc_block_size = MMC_BLOCK_SIZE; + ulong src = blknr * mmc_block_size + CFG_MMC_BASE; + + mmc_read(src, dst, blkcnt*mmc_block_size); + return blkcnt; +} + +/* MMC_DEFAULT_RCA should probably be just 1, but this may break other code + that expects it to be shifted. */ +static u_int16_t rca = MMC_DEFAULT_RCA >> 16; + +static u_int32_t mmc_size(const struct mmc_csd *csd) +{ + u_int32_t block_len, mult, blocknr; + + block_len = csd->read_bl_len << 12; + mult = csd->c_size_mult1 << 8; + blocknr = (csd->c_size+1) * mult; + + return blocknr * block_len; +} + +struct sd_cid { + char pnm_0; /* product name */ + char oid_1; /* OEM/application ID */ + char oid_0; + uint8_t mid; /* manufacturer ID */ + char pnm_4; + char pnm_3; + char pnm_2; + char pnm_1; + uint8_t psn_2; /* product serial number */ + uint8_t psn_1; + uint8_t psn_0; /* MSB */ + uint8_t prv; /* product revision */ + uint8_t crc; /* CRC7 checksum, b0 is unused and set to 1 */ + uint8_t mdt_1; /* manufacturing date, LSB, RRRRyyyy yyyymmmm */ + uint8_t mdt_0; /* MSB */ + uint8_t psn_3; /* LSB */ +}; + +static void print_mmc_cid(mmc_cid_t *cid) +{ + printf("MMC found. Card desciption is:\n"); + printf("Manufacturer ID = %02x%02x%02x\n", + cid->id[0], cid->id[1], cid->id[2]); + printf("HW/FW Revision = %x %x\n",cid->hwrev, cid->fwrev); + cid->hwrev = cid->fwrev = 0; /* null terminate string */ + printf("Product Name = %s\n",cid->name); + printf("Serial Number = %02x%02x%02x\n", + cid->sn[0], cid->sn[1], cid->sn[2]); + printf("Month = %d\n",cid->month); + printf("Year = %d\n",1997 + cid->year); +} + +static void print_sd_cid(const struct sd_cid *cid) +{ + printf("Manufacturer: 0x%02x, OEM \"%c%c\"\n", + cid->mid, cid->oid_0, cid->oid_1); + printf("Product name: \"%c%c%c%c%c\", revision %d.%d\n", + cid->pnm_0, cid->pnm_1, cid->pnm_2, cid->pnm_3, cid->pnm_4, + cid->prv >> 4, cid->prv & 15); + printf("Serial number: %u\n", + cid->psn_0 << 24 | cid->psn_1 << 16 | cid->psn_2 << 8 | + cid->psn_3); + printf("Manufacturing date: %d/%d\n", + cid->mdt_1 & 15, + 2000+((cid->mdt_0 & 15) << 4)+((cid->mdt_1 & 0xf0) >> 4)); + printf("CRC: 0x%02x, b0 = %d\n", + cid->crc >> 1, cid->crc & 1); +} + +int mmc_init(int verbose) +{ + int retries, rc = -ENODEV; + int is_sd = 0; + u_int32_t *resp; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + + sdi = S3C2410_GetBase_SDI(); + + debug("mmc_init(PCLK=%u)\n", get_PCLK()); + + clk_power->CLKCON |= (1 << 9); + + /* S3C2410 has some bug that prevents reliable operation at higher speed */ + //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ + sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ + sdi->SDIBSIZE = 512; + sdi->SDIDTIMER = 0xffff; + sdi->SDIIMSK = 0x0; + sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK; + udelay(125000); /* FIXME: 74 SDCLK cycles */ + + mmc_csd.c_size = 0; + + /* reset */ + retries = 10; + resp = mmc_cmd(MMC_CMD_RESET, 0, 0); + + printf("trying to detect SD Card...\n"); + while (retries--) { + udelay(100000); + resp = mmc_cmd(55, 0x00000000, CMD_F_RESP); + resp = mmc_cmd(41, 0x00300000, CMD_F_RESP); + + if (resp[0] & (1 << 31)) { + is_sd = 1; + break; + } + } + + if (retries == 0 && !is_sd) { + retries = 10; + printf("failed to detect SD Card, trying MMC\n"); + resp = mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ffc000, CMD_F_RESP); + while (retries-- && resp && !(resp[4] & 0x80)) { + debug("resp %x %x\n", resp[0], resp[1]); + udelay(50); + resp = mmc_cmd(1, 0x00ffff00, CMD_F_RESP); + } + } + + /* try to get card id */ + resp = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, CMD_F_RESP|CMD_F_RESP_LONG); + if (resp) { + if (!is_sd) { + /* TODO configure mmc driver depending on card + attributes */ + mmc_cid_t *cid = (mmc_cid_t *)resp; + + if (verbose) + print_mmc_cid(cid); + sprintf((char *) mmc_dev.vendor, + "Man %02x%02x%02x Snr %02x%02x%02x", + cid->id[0], cid->id[1], cid->id[2], + cid->sn[0], cid->sn[1], cid->sn[2]); + sprintf((char *) mmc_dev.product,"%s",cid->name); + sprintf((char *) mmc_dev.revision,"%x %x", + cid->hwrev, cid->fwrev); + } + else { + struct sd_cid *cid = (struct sd_cid *) resp; + + if (verbose) + print_sd_cid(cid); + sprintf((char *) mmc_dev.vendor, + "Man %02 OEM %c%c \"%c%c%c%c%c\"", + cid->mid, cid->oid_0, cid->oid_1, + cid->pnm_0, cid->pnm_1, cid->pnm_2, cid->pnm_3, + cid->pnm_4); + sprintf((char *) mmc_dev.product, "%d", + cid->psn_0 << 24 | cid->psn_1 << 16 | + cid->psn_2 << 8 | cid->psn_3); + sprintf((char *) mmc_dev.revision, "%d.%d", + cid->prv >> 4, cid->prv & 15); + } + + /* fill in device description */ + mmc_dev.if_type = IF_TYPE_MMC; + mmc_dev.part_type = PART_TYPE_DOS; + mmc_dev.dev = 0; + mmc_dev.lun = 0; + mmc_dev.type = 0; + /* FIXME fill in the correct size (is set to 32MByte) */ + mmc_dev.blksz = 512; + mmc_dev.lba = 0x10000; + mmc_dev.removable = 0; + mmc_dev.block_read = mmc_bread; + + /* MMC exists, get CSD too */ + resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, CMD_F_RESP); + if (is_sd) + rca = resp[0] >> 16; + + resp = mmc_cmd(MMC_CMD_SEND_CSD, rca<<16, CMD_F_RESP|CMD_F_RESP_LONG); + if (resp) { + mmc_csd_t *csd = (mmc_csd_t *)resp; + memcpy(&mmc_csd, csd, sizeof(csd)); + rc = 0; + mmc_ready = 1; + /* FIXME add verbose printout for csd */ + printf("READ_BL_LEN=%u, C_SIZE_MULT=%u, C_SIZE=%u\n", + csd->read_bl_len, csd->c_size_mult1, csd->c_size); + printf("size = %u\n", mmc_size(csd)); + } + } + + resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca<<16, CMD_F_RESP); + +#ifdef CONFIG_MMC_WIDE + if (is_sd) { + resp = mmc_cmd(55, rca<<16, CMD_F_RESP); + resp = mmc_cmd(6, 0x02, CMD_F_RESP); + wide = 1; + } +#endif + + fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */ + + return rc; +} + +int +mmc_ident(block_dev_desc_t *dev) +{ + return 0; +} + +int +mmc2info(ulong addr) +{ + /* FIXME hard codes to 32 MB device */ + if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) + return 1; + + return 0; +} + +#endif /* CONFIG_MMC */ Index: u-boot/include/asm-arm/arch-s3c24x0/mmc.h =================================================================== --- /dev/null +++ u-boot/include/asm-arm/arch-s3c24x0/mmc.h @@ -0,0 +1,112 @@ +/* + * linux/drivers/mmc/mmc_pxa.h + * + * Author: Vladimir Shebordaev, Igor Oblakov + * Copyright: MontaVista Software Inc. + * + * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MMC_PXA_P_H__ +#define __MMC_PXA_P_H__ + +#include + +#define MMC_DEFAULT_RCA (1<<16) + +#define MMC_BLOCK_SIZE 512 +#define MMC_CMD_RESET 0 +#define MMC_CMD_SEND_OP_COND 1 +#define MMC_CMD_ALL_SEND_CID 2 +#define MMC_CMD_SET_RCA 3 +#define MMC_CMD_SELECT_CARD 7 +#define MMC_CMD_SEND_CSD 9 +#define MMC_CMD_SEND_CID 10 +#define MMC_CMD_SEND_STATUS 13 +#define MMC_CMD_SET_BLOCKLEN 16 +#define MMC_CMD_READ_BLOCK 17 +#define MMC_CMD_RD_BLK_MULTI 18 +#define MMC_CMD_WRITE_BLOCK 24 + +#define MMC_MAX_BLOCK_SIZE 512 + +#define MMC_R1_IDLE_STATE 0x01 +#define MMC_R1_ERASE_STATE 0x02 +#define MMC_R1_ILLEGAL_CMD 0x04 +#define MMC_R1_COM_CRC_ERR 0x08 +#define MMC_R1_ERASE_SEQ_ERR 0x01 +#define MMC_R1_ADDR_ERR 0x02 +#define MMC_R1_PARAM_ERR 0x04 + +#define MMC_R1B_WP_ERASE_SKIP 0x0002 +#define MMC_R1B_ERR 0x0004 +#define MMC_R1B_CC_ERR 0x0008 +#define MMC_R1B_CARD_ECC_ERR 0x0010 +#define MMC_R1B_WP_VIOLATION 0x0020 +#define MMC_R1B_ERASE_PARAM 0x0040 +#define MMC_R1B_OOR 0x0080 +#define MMC_R1B_IDLE_STATE 0x0100 +#define MMC_R1B_ERASE_RESET 0x0200 +#define MMC_R1B_ILLEGAL_CMD 0x0400 +#define MMC_R1B_COM_CRC_ERR 0x0800 +#define MMC_R1B_ERASE_SEQ_ERR 0x1000 +#define MMC_R1B_ADDR_ERR 0x2000 +#define MMC_R1B_PARAM_ERR 0x4000 + +typedef struct mmc_cid +{ + /* FIXME: BYTE_ORDER */ + uchar year:4, + month:4; + uchar sn[3]; + uchar fwrev:4, + hwrev:4; + uchar name[6]; + uchar id[3]; +} mmc_cid_t; + +typedef struct mmc_csd +{ + uchar ecc:2, + file_format:2, + tmp_write_protect:1, + perm_write_protect:1, + copy:1, + file_format_grp:1; + uint64_t content_prot_app:1, + rsvd3:4, + write_bl_partial:1, + write_bl_len:4, + r2w_factor:3, + default_ecc:2, + wp_grp_enable:1, + wp_grp_size:5, + erase_grp_mult:5, + erase_grp_size:5, + c_size_mult1:3, + vdd_w_curr_max:3, + vdd_w_curr_min:3, + vdd_r_curr_max:3, + vdd_r_curr_min:3, + c_size:12, + rsvd2:2, + dsr_imp:1, + read_blk_misalign:1, + write_blk_misalign:1, + read_bl_partial:1; + + ushort read_bl_len:4, + ccc:12; + uchar tran_speed; + uchar nsac; + uchar taac; + uchar rsvd1:2, + spec_vers:4, + csd_structure:2; +} mmc_csd_t; + + +#endif /* __MMC_PXA_P_H__ */ Index: u-boot/include/asm-arm/arch-s3c24x0/regs-sdi.h =================================================================== --- /dev/null +++ u-boot/include/asm-arm/arch-s3c24x0/regs-sdi.h @@ -0,0 +1,110 @@ +/* linux/include/asm/arch-s3c2410/regs-sdi.h + * + * Copyright (c) 2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 MMC/SDIO register definitions + * + * Changelog: + * 18-Aug-2004 Ben Dooks Created initial file + * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates + * 29-Nov-2004 Ben Dooks Updated Koen's patch +*/ + +#ifndef __ASM_ARM_REGS_SDI +#define __ASM_ARM_REGS_SDI "regs-sdi.h" + +#define S3C2440_SDICON_SDRESET (1<<8) +#define S3C2440_SDICON_MMCCLOCK (1<<5) +#define S3C2410_SDICON_BYTEORDER (1<<4) +#define S3C2410_SDICON_SDIOIRQ (1<<3) +#define S3C2410_SDICON_RWAITEN (1<<2) +#define S3C2410_SDICON_FIFORESET (1<<1) +#define S3C2410_SDICON_CLOCKTYPE (1<<0) + +#define S3C2410_SDICMDCON_ABORT (1<<12) +#define S3C2410_SDICMDCON_WITHDATA (1<<11) +#define S3C2410_SDICMDCON_LONGRSP (1<<10) +#define S3C2410_SDICMDCON_WAITRSP (1<<9) +#define S3C2410_SDICMDCON_CMDSTART (1<<8) +#define S3C2410_SDICMDCON_SENDERHOST (1<<6) +#define S3C2410_SDICMDCON_INDEX (0x3f) + +#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) +#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) +#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) +#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) +#define S3C2410_SDICMDSTAT_XFERING (1<<8) +#define S3C2410_SDICMDSTAT_INDEX (0xff) + +#define S3C2440_SDIDCON_DS_BYTE (0<<22) +#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) +#define S3C2440_SDIDCON_DS_WORD (2<<22) +#define S3C2410_SDIDCON_IRQPERIOD (1<<21) +#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) +#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) +#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) +#define S3C2410_SDIDCON_BLOCKMODE (1<<17) +#define S3C2410_SDIDCON_WIDEBUS (1<<16) +#define S3C2410_SDIDCON_DMAEN (1<<15) +#define S3C2410_SDIDCON_STOP (1<<14) +#define S3C2440_SDIDCON_DATSTART (1<<14) +#define S3C2410_SDIDCON_DATMODE (3<<12) +#define S3C2410_SDIDCON_BLKNUM (0x7ff) + +/* constants for S3C2410_SDIDCON_DATMODE */ +#define S3C2410_SDIDCON_XFER_READY (0<<12) +#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) +#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) +#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) + +#define S3C2410_SDIDCNT_BLKNUM_MASK (0xFFF) +#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) + +#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) +#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) +#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ +#define S3C2410_SDIDSTA_CRCFAIL (1<<7) +#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) +#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) +#define S3C2410_SDIDSTA_XFERFINISH (1<<4) +#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) +#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ +#define S3C2410_SDIDSTA_TXDATAON (1<<1) +#define S3C2410_SDIDSTA_RXDATAON (1<<0) + +#define S3C2440_SDIFSTA_FIFORESET (1<<16) +#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ +#define S3C2410_SDIFSTA_TFDET (1<<13) +#define S3C2410_SDIFSTA_RFDET (1<<12) +#define S3C2410_SDIFSTA_TFHALF (1<<11) +#define S3C2410_SDIFSTA_TFEMPTY (1<<10) +#define S3C2410_SDIFSTA_RFLAST (1<<9) +#define S3C2410_SDIFSTA_RFFULL (1<<8) +#define S3C2410_SDIFSTA_RFHALF (1<<7) +#define S3C2410_SDIFSTA_COUNTMASK (0x7f) + +#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) +#define S3C2410_SDIIMSK_CMDSENT (1<<16) +#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) +#define S3C2410_SDIIMSK_RESPONSEND (1<<14) +#define S3C2410_SDIIMSK_READWAIT (1<<13) +#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) +#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) +#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) +#define S3C2410_SDIIMSK_DATACRC (1<<9) +#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) +#define S3C2410_SDIIMSK_DATAFINISH (1<<7) +#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) +#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ +#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) +#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) +#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) +#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) +#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) + +#endif /* __ASM_ARM_REGS_SDI */ Index: u-boot/include/s3c24x0.h =================================================================== --- u-boot.orig/include/s3c24x0.h +++ u-boot/include/s3c24x0.h @@ -637,13 +637,7 @@ S3C24X0_REG32 SDIDCNT; S3C24X0_REG32 SDIDSTA; S3C24X0_REG32 SDIFSTA; -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res[3]; - S3C24X0_REG8 SDIDAT; -#else - S3C24X0_REG8 SDIDAT; - S3C24X0_REG8 res[3]; -#endif + S3C24X0_REG32 SDIDAT; S3C24X0_REG32 SDIIMSK; } /*__attribute__((__packed__))*/ S3C2410_SDI; @@ -1123,11 +1117,7 @@ #define rSDIDatCnt (*(volatile unsigned *)0x5A000030) #define rSDIDatSta (*(volatile unsigned *)0x5A000034) #define rSDIFSTA (*(volatile unsigned *)0x5A000038) -#ifdef __BIG_ENDIAN -#define rSDIDAT (*(volatile unsigned char *)0x5A00003F) -#else -#define rSDIDAT (*(volatile unsigned char *)0x5A00003C) -#endif +#define rSDIDAT (*(volatile unsigned *)0x5A00003C) #define rSDIIntMsk (*(volatile unsigned *)0x5A000040) #endif