Index: linux-2.6.14/arch/arm/tools/mach-types
===================================================================
--- linux-2.6.14.orig/arch/arm/tools/mach-types
+++ linux-2.6.14/arch/arm/tools/mach-types
@@ -869,3 +869,4 @@ davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_
 htcuniversal		MACH_HTCUNIVERSAL	HTCUNIVERSAL		855
 tpad			MACH_TPAD		TPAD			856
 roverp3			MACH_ROVERP3		ROVERP3			857
+n35			MACH_N35		N35			927
Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c
===================================================================
--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c
+++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c
@@ -1,5 +1,14 @@
 /* linux/arch/arm/mach-s3c2410/mach-n30.c
  *
+ * Machine specific code for the following PDAs:
+ *
+ * Acer N30
+ *
+ * Acer N35
+ * Navman PiN 570
+ * Yakumo AlphaX (untested)
+ * Airis NC05 (untested)
+ *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -65,7 +74,8 @@ static struct s3c2410_uartcfg n30_uartcf
 		.ulcon	     = 0x43,
 		.ufcon	     = 0x51,
 	},
-	/* The BlueTooth controller is connected to port 2 */
+	/* On the N30 the bluetooth controller is connected here.
+	 * On the N35 and variants the GPS receiver is connected here. */
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
@@ -136,3 +146,16 @@ MACHINE_START(N30, "Acer-N30")
 	.init_irq	= n30_init_irq,
 	.map_io		= n30_map_io,
 MACHINE_END
+
+MACHINE_START(N35, "Acer-N35")
+	/* Maintainer: Christer Weinigel <christer@weinigel.se>
+	*/
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.timer		= &s3c24xx_timer,
+	.init_machine	= n30_init,
+	.init_irq	= n30_init_irq,
+	.map_io		= n30_map_io,
+MACHINE_END
Index: linux-2.6.14/arch/arm/mach-s3c2410/Kconfig
===================================================================
--- linux-2.6.14.orig/arch/arm/mach-s3c2410/Kconfig
+++ linux-2.6.14/arch/arm/mach-s3c2410/Kconfig
@@ -39,9 +39,18 @@ config MACH_N30
 	bool "Acer N30"
 	select CPU_S3C2410
 	help
-	  Say Y here if you are using the Acer N30
+	  Say Y here if you want support for the Acer N30 PDA.
 
-	  <http://zoo.weinigel.se/n30>.
+	  <http://www.handhelds.org/moin/moin.cgi/AcerN30>.
+
+config MACH_N35
+	bool "Acer N35/Navman PiN 570"
+	select CPU_S3C2410
+	help
+	  Say Y here if you want support for the Acer N35 or
+	  Navman PiN 570 PDAs.
+
+	  <http://www.handhelds.org/moin/moin.cgi/AcerN30>.
 
 config ARCH_SMDK2410
 	bool "SMDK2410/A9M2410"