include Rules.make

COMPONENTS:=$(DMAI_INSTALL_DIR) $(LINK_INSTALL_DIR) $(XDAIS_INSTALL_DIR) $(CMEM_INSTALL_DIR) $(EDMA3_LLD_INSTALL_DIR) $(FC_INSTALL_DIR) $(CE_INSTALL_DIR) $(XDC_INSTALL_DIR) $(BIOSUTILS_INSTALL_DIR) $(BIOS_INSTALL_DIR) $(DVTB_INSTALL_DIR) $(CODEC_INSTALL_DIR)

REPOSITORIES:=$(addsuffix /packages, $(COMPONENTS))

CHECKLIST:=$(REPOSITORIES) $(CODEGEN_INSTALL_DIR)/bin/cl6x $(MVTOOL_PREFIX)gcc $(LINUXKERNEL_INSTALL_DIR)/Documentation $(DEMO_INSTALL_DIR)/$(PLATFORM) $(PSP_INSTALL_DIR)/docs

.PHONY:	all clean everything clobber help cmem cmem_clean dmai dmai_clean dm355mm dm355mm_clean dsplink dsplink_arm dsplink_dsp dsplink_samples dsplink_clean codecs codecs_clean linux linux_clean info check install

#==============================================================================
# Set up platform dependent variables.
#==============================================================================
ifeq ($(PLATFORM),dm6446)
LINUXKERNEL_CONFIG=davinci_all_defconfig
LINUXSAMPLES_PLATFORM=dm644x
DSPLINK_CONFIG=--platform=DAVINCI --nodsp=1 --dspcfg_0=DM6446GEMSHMEM --dspos_0=DSPBIOS5XX --gppos=MVL5G --comps=ponslrm
DSPLINK_MODULE=$(LINK_INSTALL_DIR)/packages/dsplink/gpp/export/BIN/Linux/DAVINCI/RELEASE/dsplinkk.ko
DMAI_PLATFORM=dm6446_al
else
ifeq ($(PLATFORM),dm6467)
LINUXKERNEL_CONFIG=davinci_all_defconfig
LINUXSAMPLES_PLATFORM=dm646x
DSPLINK_CONFIG=--platform=DAVINCIHD --nodsp=1 --dspcfg_0=DM6467GEMSHMEM --dspos_0=DSPBIOS5XX --gppos=MVL5G --comps=ponslrm
DSPLINK_MODULE=$(LINK_INSTALL_DIR)/packages/dsplink/gpp/export/BIN/Linux/DAVINCIHD/RELEASE/dsplinkk.ko
DMAI_PLATFORM=dm6467_al
else
ifeq ($(PLATFORM),dm355)
LINUXKERNEL_CONFIG=davinci_dm355_defconfig
LINUXSAMPLES_PLATFORM=dm355
DMAI_PLATFORM=dm355_al
else
	$(error PLATFORM not set correctly: $(PLATFORM))
endif
endif
endif

#==============================================================================
# The default build target.
#==============================================================================
all:	check cmem dm355mm dmai

#==============================================================================
# Clean up the targets built by 'make all'.
#==============================================================================
clean:	cmem_clean dm355mm_clean dmai_clean

#==============================================================================
# Build everything rebuildable.
#==============================================================================
everything: check codecs linux dsplink all

#==============================================================================
# Clean up all targets.
#==============================================================================
clobber:	clean dsplink_clean linux_clean codecs_clean

#==============================================================================
# A help message target.
#==============================================================================
help:
	@echo
	@echo "Available build targets are:"
	@echo
	@echo "    check		   : Make sure Rules.make is set up properly"
	@echo "    info		   : List versions of DVSDK components"
	@echo
	@echo "    all			   : Build the components below"
	@echo "    clean		   : Remove files generated by the 'all' target"
	@echo
	@echo "    cmem		   : Build the CMEM kernel module for $(PLATFORM)"
	@echo "    cmem_clean		   : Remove generated cmem files."
	@echo
	@echo "    dmai		   : Build DMAI for $(PLATFORM)_al"
	@echo "    dmai_clean		   : Remove generated DMAI files."
	@echo
	@echo "    dm355mm		   : Build the dm355mm kernel module"
	@echo "    dm355mm_clean	   : Remove generated dm355mm files"
	@echo
	@echo "The following targets have to be explicitly built and cleaned:"
	@echo
	@echo "    everything		   : Rebuild everything including below targets"
	@echo "    clobber		   : Remove all generated files"
	@echo
	@echo "    dsplink		   : Configure and build DSP Link for $(PLATFORM) ARM and DSP"
	@echo "    dsplink_arm		   : Configure and build DSP Link for $(PLATFORM) ARM"
	@echo "    dsplink_dsp		   : Configure and build DSP Link for $(PLATFORM) DSP"
	@echo "    dsplink_samples	   : Build DSP Link ARM and DSP sample applications "
	@echo "    dsplink_clean	   : Remove generated DSP Link files"
	@echo
	@echo "    codecs		   : Build codec servers for $(PLATFORM)"
	@echo "    codecs_clean	   : Remove generated codec server files"
	@echo
	@echo "    linux		   : Build Linux kernel uImage for $(PLATFORM)"
	@echo "    linux_clean		   : Remove generated Linux kernel files"
	@echo
	@echo "    install		   : Install binaries to $(EXEC_DIR)"
	@echo

#==============================================================================
# Target for listing information about the DVSDK components.
#==============================================================================
info:	check
	@LINUXKERNEL_INSTALL_DIR="$(LINUXKERNEL_INSTALL_DIR)" CODEGEN_INSTALL_DIR="$(CODEGEN_INSTALL_DIR)" GCC_PREFIX="$(MVTOOL_PREFIX)" XDC_INSTALL_DIR="$(XDC_INSTALL_DIR)" REPOSITORIES="$(REPOSITORIES)" $(DVSDK_INSTALL_DIR)/bin/info.sh 

#==============================================================================
# Target for checking that the Rules.make file is set up properly.
#==============================================================================
check:
	@CHECKLIST="$(CHECKLIST)" $(DVSDK_INSTALL_DIR)/bin/check.sh

#==============================================================================
# Build the Linux kernel. Also, an explicit cleanup target is defined.
#==============================================================================
linux:
	$(MAKE) -C $(LINUXKERNEL_INSTALL_DIR) CROSS_COMPILE=$(MVTOOL_PREFIX) $(LINUXKERNEL_CONFIG)
	$(MAKE) -C $(LINUXKERNEL_INSTALL_DIR) CROSS_COMPILE=$(MVTOOL_PREFIX) uImage
	@echo
	@echo "Your kernel image can be found at $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/uImage"

linux_clean:
	$(MAKE) -C $(LINUXKERNEL_INSTALL_DIR) CROSS_COMPILE=$(MVTOOL_PREFIX) clean

#==============================================================================
# Build the CMEM kernel module for the configured platform, and make sure the
# kernel_binaries directory is kept in sync. Also, an explicit cleanup target
# is defined.
#==============================================================================
cmem:
	$(MAKE) -C $(CMEM_INSTALL_DIR)/packages/ti/sdo/linuxutils/cmem/src/interface ../../lib/cmem.a470MV
	$(MAKE) -C $(CMEM_INSTALL_DIR)/packages/ti/sdo/linuxutils/cmem/src/module
	@mkdir -p $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)
	@cp $(CMEM_INSTALL_DIR)/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.ko $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)/
	@echo
	@echo "cmemk.ko kernel module can be found under $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)"

cmem_clean:
	$(MAKE) -C $(CMEM_INSTALL_DIR)/packages/ti/sdo/linuxutils/cmem/src/module clean
	$(MAKE) -C $(CMEM_INSTALL_DIR)/packages/ti/sdo/linuxutils/cmem/src/interface clean

#==============================================================================
# Build the *evaluation* codec servers for the configured platform. Also, an
# explicit cleanup target is defined.
#==============================================================================
codecs:
ifneq ($(PLATFORM),dm355)
	$(MAKE) -C $(CODEC_INSTALL_DIR) DVSDK_INSTALL_DIR=$(DVSDK_INSTALL_DIR) BIOS_INSTALL_DIR=$(BIOS_INSTALL_DIR) XDC_INSTALL_DIR=$(XDC_INSTALL_DIR) CE_INSTALL_DIR=$(CE_INSTALL_DIR) FC_INSTALL_DIR=$(FC_INSTALL_DIR) CMEM_INSTALL_DIR=$(CMEM_INSTALL_DIR) CODECS_INSTALL_DIR=$(CODEC_INSTALL_DIR) BIOSUTILS_INSTALL_DIR=$(BIOSUTILS_INSTALL_DIR) XDAIS_INSTALL_DIR=$(XDAIS_INSTALL_DIR) LINK_INSTALL_DIR=$(LINK_INSTALL_DIR) XDCARGS=\"eval\"
endif

codecs_clean:
ifneq ($(PLATFORM),dm355)
	$(MAKE) -C $(CODEC_INSTALL_DIR) DVSDK_INSTALL_DIR=$(DVSDK_INSTALL_DIR) BIOS_INSTALL_DIR=$(BIOS_INSTALL_DIR) XDC_INSTALL_DIR=$(XDC_INSTALL_DIR) CE_INSTALL_DIR=$(CE_INSTALL_DIR) FC_INSTALL_DIR=$(FC_INSTALL_DIR) CMEM_INSTALL_DIR=$(CMEM_INSTALL_DIR) CODECS_INSTALL_DIR=$(CODEC_INSTALL_DIR) BIOSUTILS_INSTALL_DIR=$(BIOSUTILS_INSTALL_DIR) XDAIS_INSTALL_DIR=$(XDAIS_INSTALL_DIR) LINK_INSTALL_DIR=$(LINK_INSTALL_DIR) XDCARGS=\"eval\" clean
endif

#==============================================================================
# Build the dm355mm kernel module (if the configured platform is dm355). Also,
# an explicit cleanup target is defined.
#==============================================================================
dm355mm:
ifeq ($(PLATFORM),dm355)
	$(MAKE) -C $(CODEC_INSTALL_DIR)/dm355mm/module KERNEL_DIR=$(LINUXKERNEL_INSTALL_DIR)
	@mkdir -p $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)
	@cp $(CODEC_INSTALL_DIR)/dm355mm/module/dm350mmap.ko $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)/
	@echo
	@echo "dm350mmap.ko kernel module can be found under $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)"
endif

dm355mm_clean:
ifeq ($(PLATFORM),dm355)
	$(MAKE) -C $(CODEC_INSTALL_DIR)/dm355mm/module KERNEL_DIR=$(LINUXKERNEL_INSTALL_DIR) clean
endif

#==============================================================================
# Build the Davinci Multimedia Application Interface for the configured
# platform. Also, an explicit cleanup target is defined.
#==============================================================================
dmai:
	@$(MAKE) -C $(DMAI_INSTALL_DIR) PLATFORM=${DMAI_PLATFORM} \
			CE_INSTALL_DIR_${DMAI_PLATFORM}=$(CE_INSTALL_DIR) \
			CODEC_INSTALL_DIR_${DMAI_PLATFORM}=$(CODEC_INSTALL_DIR) \
			LINK_INSTALL_DIR_${DMAI_PLATFORM}=$(LINK_INSTALL_DIR) \
			CMEM_INSTALL_DIR_${DMAI_PLATFORM}=$(CMEM_INSTALL_DIR) \
			FC_INSTALL_DIR_${DMAI_PLATFORM}=$(FC_INSTALL_DIR) \
			LPM_INSTALL_DIR_${DMAI_PLATFORM}=$(LPM_INSTALL_DIR) \
			XDAIS_INSTALL_DIR_${DMAI_PLATFORM}=$(XDAIS_INSTALL_DIR) \
			BIOS_INSTALL_DIR_${DMAI_PLATFORM}=$(BIOS_INSTALL_DIR) \
			LINUXLIBS_INSTALL_DIR_${DMAI_PLATFORM}=$(LINUXLIBS_INSTALL_DIR)\
			LINUXKERNEL_INSTALL_DIR_${DMAI_PLATFORM}=$(LINUXKERNEL_INSTALL_DIR) \
			CROSS_COMPILE_${DMAI_PLATFORM}=$(CSTOOL_PREFIX) \
			XDC_INSTALL_DIR_${DMAI_PLATFORM}=$(XDC_INSTALL_DIR) \
			EXEC_DIR_${DMAI_PLATFORM}=$(EXEC_DIR) all

	@echo
	@echo "DMAI applications can be found under $(DMAI_INSTALL_DIR)/packages/ti/sdo/dmai/apps"
	@echo "To install them to $(EXEC_DIR) enter $(DMAI_INSTALL_DIR) and execute 'make install'"

dmai_clean:
	$(MAKE) -C $(DMAI_INSTALL_DIR) PLATFORM=${DMAI_PLATFORM} clean

#==============================================================================
# Build DSP Link for the configured platform. Also, an explicit cleanup target
# is defined.
#==============================================================================
dsplink:	dsplink_arm dsplink_dsp dsplink_samples

dsplink_cfg:
ifneq ($(PLATFORM),dm355)
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink perl $(LINK_INSTALL_DIR)/packages/dsplink/config/bin/dsplinkcfg.pl $(DSPLINK_CONFIG)
else
	$(error DSP Link build is not supported for $(PLATFORM))
endif

dsplink_arm:	dsplink_cfg
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink $(XDC_INSTALL_DIR)/gmake -C $(LINK_INSTALL_DIR)/packages/dsplink/gpp/src BASE_TOOLCHAIN=$(MVTOOL_DIR) BASE_BUILDOS=$(LINUXKERNEL_INSTALL_DIR)
	@mkdir -p $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)
	@cp $(DSPLINK_MODULE) $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)/
	@echo
	@echo "dsplinkk.ko kernel module can be found under $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)"

dsplink_dsp:	dsplink_cfg
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink $(XDC_INSTALL_DIR)/gmake -C $(LINK_INSTALL_DIR)/packages/dsplink/dsp/src BASE_SABIOS=$(BIOS_INSTALL_DIR) XDCTOOLS_DIR=$(XDC_INSTALL_DIR) BASE_CGTOOLS=$(CODEGEN_INSTALL_DIR)

dsplink_samples:
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink $(XDC_INSTALL_DIR)/gmake -C $(LINK_INSTALL_DIR)/packages/dsplink/gpp/src/samples BASE_TOOLCHAIN=$(MVTOOL_DIR) BASE_BUILDOS=$(LINUXKERNEL_INSTALL_DIR)
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink $(XDC_INSTALL_DIR)/gmake -C $(LINK_INSTALL_DIR)/packages/dsplink/dsp/src/samples BASE_SABIOS=$(BIOS_INSTALL_DIR) XDCTOOLS_DIR=$(XDC_INSTALL_DIR) BASE_CGTOOLS=$(CODEGEN_INSTALL_DIR)

dsplink_clean:
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink $(XDC_INSTALL_DIR)/gmake -C $(LINK_INSTALL_DIR)/packages/dsplink/gpp/src BASE_TOOLCHAIN=$(MVTOOL_DIR) BASE_BUILDOS=$(LINUXKERNEL_INSTALL_DIR) clean
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink $(XDC_INSTALL_DIR)/gmake -C $(LINK_INSTALL_DIR)/packages/dsplink/dsp/src BASE_SABIOS=$(BIOS_INSTALL_DIR) XDCTOOLS_DIR=$(XDC_INSTALL_DIR) BASE_CGTOOLS=$(CODEGEN_INSTALL_DIR) clean
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink $(XDC_INSTALL_DIR)/gmake -C $(LINK_INSTALL_DIR)/packages/dsplink/gpp/src/samples BASE_TOOLCHAIN=$(MVTOOL_DIR) BASE_BUILDOS=$(LINUXKERNEL_INSTALL_DIR) clean
	DSPLINK=$(LINK_INSTALL_DIR)/packages/dsplink $(XDC_INSTALL_DIR)/gmake -C $(LINK_INSTALL_DIR)/packages/dsplink/dsp/src/samples BASE_SABIOS=$(BIOS_INSTALL_DIR) XDCTOOLS_DIR=$(XDC_INSTALL_DIR) BASE_CGTOOLS=$(CODEGEN_INSTALL_DIR) clean

#==============================================================================
# Install the built binaries to the target file system.
#==============================================================================
install:
	@echo
	@echo Creating $(EXEC_DIR)
	@mkdir -p $(EXEC_DIR)

	@echo Copying kernel modules to target file system: $(EXEC_DIR)/
	@install -m 666 $(DVSDK_INSTALL_DIR)/kernel_binaries/$(PLATFORM)/* $(EXEC_DIR)/

	@echo Installing DVSDK demos..
	$(MAKE) -C $(DEMO_INSTALL_DIR)/$(PLATFORM) install

	@echo Copying examples..
	@cp -rp examples/$(PLATFORM)/web $(EXEC_DIR)/
	@cp -p examples/$(PLATFORM)/dvevmdemo $(EXEC_DIR)/

	@echo Installing clips..
	$(MAKE) -C clips install

ifeq ($(PLATFORM),dm6446)
	@echo Copying codec servers..
	@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/encode/encodeCombo.x64P $(EXEC_DIR)/
	-@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/encode/encodeCombo_e.x64P $(EXEC_DIR)/
	@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/decode/decodeCombo.x64P $(EXEC_DIR)/
	-@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/decode/decodeCombo_e.x64P $(EXEC_DIR)/
	@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/loopback/loopbackCombo.x64P $(EXEC_DIR)/
	-@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/loopback/loopbackCombo_e.x64P $(EXEC_DIR)/
	@echo Copying dsplinkk.ko
	@install -m 666 $(LINK_INSTALL_DIR)/packages/dsplink/gpp/export/BIN/Linux/DAVINCI/RELEASE/dsplinkk.ko $(EXEC_DIR)/
endif

ifeq ($(PLATFORM),dm6467)
	@echo Copying codec servers..
	@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/encode/encodeCombo.x64P $(EXEC_DIR)/
	-@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/encode/encodeCombo_e.x64P $(EXEC_DIR)/
	@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/decode/decodeCombo.x64P $(EXEC_DIR)/
	-@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/decode/decodeCombo_e.x64P $(EXEC_DIR)/
	@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/loopback/loopbackCombo.x64P $(EXEC_DIR)/
	-@install -m 666 $(CODEC_INSTALL_DIR)/packages/ti/sdo/servers/loopback/loopbackCombo_e.x64P $(EXEC_DIR)/
	@echo Copying dsplinkk.ko
	@install -m 666 $(LINK_INSTALL_DIR)/packages/dsplink/gpp/export/BIN/Linux/DAVINCIHD/RELEASE/dsplinkk.ko $(EXEC_DIR)/
	@echo Copying mapdmaqhd..
	@install -m 777 $(DVSDK_INSTALL_DIR)/mapdmaq-hd/mapdmaq-hd $(EXEC_DIR)/
endif

ifeq ($(PLATFORM),dm355)
	@echo Copying mapdmaq..
	@install -m 777 $(DVSDK_INSTALL_DIR)/mapdmaq/mapdmaq $(EXEC_DIR)/
endif