fe298a1bbd7b9526ca1139da8977e1a076c4e176
diff --git a/Makefile b/Makefile
index d2534ab..d172411 100644
--- a/Makefile
+++ b/Makefile
@@ -1621,6 +1621,30 @@ MPC8360EMDS_SLAVE_config:	unconfig
 MPC8349ITX_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
 
+MPC832XEMDS_config \
+MPC832XEMDS_HOST_33_config \
+MPC832XEMDS_HOST_66_config \
+MPC832XEMDS_SLAVE_config:	unconfig
+	@echo "" >include/config.h ; \
+	if [ "$(findstring _HOST_,$@)" ] ; then \
+		echo -n "... PCI HOST " ; \
+		echo "#define CONFIG_PCI" >>include/config.h ; \
+	fi ; \
+	if [ "$(findstring _SLAVE_,$@)" ] ; then \
+		echo "...PCI SLAVE 66M"  ; \
+		echo "#define CONFIG_PCI" >>include/config.h ; \
+		echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+	fi ; \
+	if [ "$(findstring _33_,$@)" ] ; then \
+		echo -n "...33M ..." ; \
+		echo "#define PCI_33M" >>include/config.h ; \
+	fi ; \
+	if [ "$(findstring _66_,$@)" ] ; then \
+		echo -n "...66M..." ; \
+		echo "#define PCI_66M" >>include/config.h ; \
+	fi ;
+	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile
new file mode 100644
index 0000000..5ec7a87
--- /dev/null
+++ b/board/mpc832xemds/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o pci.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mpc832xemds/config.mk b/board/mpc832xemds/config.mk
new file mode 100644
index 0000000..6c3eca7
--- /dev/null
+++ b/board/mpc832xemds/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC832XEMDS
+#
+
+TEXT_BASE = 0xFE000000
diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c
new file mode 100644
index 0000000..772da67
--- /dev/null
+++ b/board/mpc832xemds/mpc832xemds.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <command.h>
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#else
+#include <asm/mmu.h>
+#endif
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+	/* ETH3 */
+	{1,  0, 1, 0, 1}, /* TxD0 */
+	{1,  1, 1, 0, 1}, /* TxD1 */
+	{1,  2, 1, 0, 1}, /* TxD2 */
+	{1,  3, 1, 0, 1}, /* TxD3 */
+	{1,  9, 1, 0, 1}, /* TxER */
+	{1, 12, 1, 0, 1}, /* TxEN */
+	{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
+
+	{1,  4, 2, 0, 1}, /* RxD0 */
+	{1,  5, 2, 0, 1}, /* RxD1 */
+	{1,  6, 2, 0, 1}, /* RxD2 */
+	{1,  7, 2, 0, 1}, /* RxD3 */
+	{1,  8, 2, 0, 1}, /* RxER */
+	{1, 10, 2, 0, 1}, /* RxDV */
+	{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
+	{1, 11, 2, 0, 1}, /* COL */
+	{1, 13, 2, 0, 1}, /* CRS */
+
+	/* ETH4 */
+	{1, 18, 1, 0, 1}, /* TxD0 */
+	{1, 19, 1, 0, 1}, /* TxD1 */
+	{1, 20, 1, 0, 1}, /* TxD2 */
+	{1, 21, 1, 0, 1}, /* TxD3 */
+	{1, 27, 1, 0, 1}, /* TxER */
+	{1, 30, 1, 0, 1}, /* TxEN */
+	{3,  6, 2, 0, 1}, /* TxCLK->CLK8 */
+
+	{1, 22, 2, 0, 1}, /* RxD0 */
+	{1, 23, 2, 0, 1}, /* RxD1 */
+	{1, 24, 2, 0, 1}, /* RxD2 */
+	{1, 25, 2, 0, 1}, /* RxD3 */
+	{1, 26, 1, 0, 1}, /* RxER */
+	{1, 28, 2, 0, 1}, /* Rx_DV */
+	{3, 31, 2, 0, 1}, /* RxCLK->CLK7 */
+	{1, 29, 2, 0, 1}, /* COL */
+	{1, 31, 2, 0, 1}, /* CRS */
+
+	{3,  4, 3, 0, 2}, /* MDIO */
+	{3,  5, 1, 0, 2}, /* MDC */
+
+	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
+};
+
+int board_early_init_f(void)
+{
+	volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
+
+	/* Enable flash write */
+	bcsr[9] &= ~0x08;
+
+	return 0;
+}
+
+int fixed_sdram(void);
+
+long int initdram(int board_type)
+{
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	u32 msize = 0;
+
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+		return -1;
+
+	/* DDR SDRAM - Main SODIMM */
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+
+	msize = fixed_sdram();
+
+	puts("\n   DDR RAM: ");
+
+	/* return total bus SDRAM size(bytes)  -- DDR */
+	return (msize * 1024 * 1024);
+}
+
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	u32 msize = 0;
+	u32 ddr_size;
+	u32 ddr_size_log2;
+
+	msize = CFG_DDR_SIZE;
+	for (ddr_size = msize << 20, ddr_size_log2 = 0;
+	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
+		if (ddr_size & 1) {
+			return -1;
+		}
+	}
+	im->sysconf.ddrlaw[0].ar =
+	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+#if (CFG_DDR_SIZE != 128)
+#warning Currenly any ddr size other than 128 is not supported
+#endif
+	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CFG_DDR_MODE;
+	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	__asm__ __volatile__ ("sync");
+	udelay(200);
+
+	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+	__asm__ __volatile__ ("sync");
+	return msize;
+}
+
+int checkboard(void)
+{
+	puts("Board: Freescale MPC832XEMDS\n");
+	return 0;
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
+	ft_cpu_setup(blob, bd);
+
+	p = ft_get_prop(blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32(bd->bi_memstart);
+		*p = cpu_to_be32(bd->bi_memsize);
+	}
+}
+#endif
diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c
new file mode 100644
index 0000000..09f3ac3
--- /dev/null
+++ b/board/mpc832xemds/pci.c
@@ -0,0 +1,313 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/*
+ * PCI Configuration space access support for MPC83xx PCI Bridge
+ */
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <pci.h>
+#include <i2c.h>
+
+#include <asm/fsl_i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PCI)
+#define PCI_FUNCTION_CONFIG   0x44
+#define PCI_FUNCTION_CFG_LOCK 0x20
+
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc83xxemds_config_table[] = {
+	{
+		PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+		pci_cfgfunc_config_device,
+		{PCI_ENET0_IOADDR,
+		PCI_ENET0_MEMADDR,
+		PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
+	},
+	{}
+}
+#endif
+static struct pci_controller hose[] = {
+	{
+#ifndef CONFIG_PCI_PNP
+		config_table:pci_mpc83xxemds_config_table,
+#endif
+	},
+};
+
+/**********************************************************************
+ * pci_init_board()
+ *********************************************************************/
+void pci_init_board(void)
+#ifdef CONFIG_PCISLAVE
+{
+	u16 reg16;
+	volatile immap_t *immr;
+	volatile law83xx_t *pci_law;
+	volatile pot83xx_t *pci_pot;
+	volatile pcictrl83xx_t *pci_ctrl;
+	volatile pciconf83xx_t *pci_conf;
+
+	immr = (immap_t *) CFG_IMMR;
+	pci_law = immr->sysconf.pcilaw;
+	pci_pot = immr->ios.pot;
+	pci_ctrl = immr->pci_ctrl;
+	pci_conf = immr->pci_conf;
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+	pci_ctrl[0].pitar0 = 0x0;
+	pci_ctrl[0].pibar0 = 0x0;
+	pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
+	    PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
+
+	pci_ctrl[0].pitar1 = 0x0;
+	pci_ctrl[0].pibar1 = 0x0;
+	pci_ctrl[0].piebar1 = 0x0;
+	pci_ctrl[0].piwar1 &= ~PIWAR_EN;
+
+	pci_ctrl[0].pitar2 = 0x0;
+	pci_ctrl[0].pibar2 = 0x0;
+	pci_ctrl[0].piebar2 = 0x0;
+	pci_ctrl[0].piwar2 &= ~PIWAR_EN;
+
+	hose[0].first_busno = 0;
+	hose[0].last_busno = 0xff;
+	pci_setup_indirect(&hose[0],
+			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+	reg16 = 0xff;
+
+	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				  PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_LATENCY_TIMER, 0x80);
+
+	/*
+	 * Unlock configuration lock in PCI function configuration register.
+	 */
+	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				  PCI_FUNCTION_CONFIG, &reg16);
+	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_FUNCTION_CONFIG, reg16);
+
+	printf("Enabled PCI 32bit Agent Mode\n");
+}
+#else
+{
+	volatile immap_t *immr;
+	volatile clk83xx_t *clk;
+	volatile law83xx_t *pci_law;
+	volatile pot83xx_t *pci_pot;
+	volatile pcictrl83xx_t *pci_ctrl;
+	volatile pciconf83xx_t *pci_conf;
+
+	u8 val8, orig_i2c_bus;
+	u16 reg16;
+	u32 val32;
+	u32 dev;
+
+	immr = (immap_t *) CFG_IMMR;
+	clk = (clk83xx_t *) & immr->clk;
+	pci_law = immr->sysconf.pcilaw;
+	pci_pot = immr->ios.pot;
+	pci_ctrl = immr->pci_ctrl;
+	pci_conf = immr->pci_conf;
+	/*
+	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+	 */
+	val32 = clk->occr;
+	udelay(2000);
+#if defined(PCI_66M)
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+	printf("PCI clock is 66MHz\n");
+#elif defined(PCI_33M)
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
+	    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
+	printf("PCI clock is 33MHz\n");
+#else
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+	printf("PCI clock is 66MHz\n");
+#endif
+	udelay(2000);
+
+	/*
+	 * Configure PCI Local Access Windows
+	 */
+	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
+
+	/*
+	 * Configure PCI Outbound Translation Windows
+	 */
+
+	/* PCI mem space - prefetch */
+	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].pocmr =
+	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/* PCI mmio - non-prefetch mem space */
+	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/* PCI IO space */
+	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+	pci_ctrl[0].piebar1 = 0x0;
+	pci_ctrl[0].piwar1 =
+	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+	    PIWAR_IWS_2G;
+
+	/*
+	 * Assign PIB PMC slot to desired PCI bus
+	 */
+
+	/* Switch temporarily to I2C bus #2 */
+	orig_i2c_bus = i2c_get_bus_num();
+	i2c_set_bus_num(1);
+
+	val8 = 0;
+	i2c_write(0x23, 0x6, 1, &val8, 1);
+	i2c_write(0x23, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x23, 0x2, 1, &val8, 1);
+	i2c_write(0x23, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x26, 0x6, 1, &val8, 1);
+	val8 = 0x34;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+
+	val8 = 0xf9;		/* PMC2, PMC3 slot to PCI bus */
+	i2c_write(0x26, 0x2, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x27, 0x6, 1, &val8, 1);
+	i2c_write(0x27, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x27, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x27, 0x3, 1, &val8, 1);
+	asm("eieio");
+
+	/* Reset to original I2C bus */
+	i2c_set_bus_num(orig_i2c_bus);
+
+	/*
+	 * Release PCI RST Output signal
+	 */
+	udelay(2000);
+	pci_ctrl[0].gcr = 1;
+	udelay(2000);
+
+	hose[0].first_busno = 0;
+	hose[0].last_busno = 0xff;
+
+	/* PCI memory prefetch space */
+	pci_set_region(hose[0].regions + 0,
+		       CFG_PCI_MEM_BASE,
+		       CFG_PCI_MEM_PHYS,
+		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+	/* PCI memory space */
+	pci_set_region(hose[0].regions + 1,
+		       CFG_PCI_MMIO_BASE,
+		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+
+	/* PCI IO space */
+	pci_set_region(hose[0].regions + 2,
+		       CFG_PCI_IO_BASE,
+		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+	/* System memory space */
+	pci_set_region(hose[0].regions + 3,
+		       CFG_PCI_SLV_MEM_LOCAL,
+		       CFG_PCI_SLV_MEM_BUS,
+		       CFG_PCI_SLV_MEM_SIZE,
+		       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	hose[0].region_count = 4;
+
+	pci_setup_indirect(&hose[0],
+			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+
+	pci_register_hose(hose);
+
+	/*
+	 * Write command register
+	 */
+	reg16 = 0xff;
+	dev = PCI_BDF(0, 0, 0);
+	pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
+	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+	printf("PCI 32bit bus on PMC2 & PMC3\n");
+
+	/*
+	 * Hose scan.
+	 */
+	hose->last_busno = pci_hose_scan(hose);
+}
+#endif				/* CONFIG_PCISLAVE */
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+	if (p != NULL) {
+		p[0] = hose[0].first_busno;
+		p[1] = hose[0].last_busno;
+	}
+}
+#endif				/* CONFIG_OF_FLAT_TREE */
+#endif				/* CONFIG_PCI */
diff --git a/board/mpc832xemds/u-boot.lds b/board/mpc832xemds/u-boot.lds
new file mode 100644
index 0000000..937c87a
--- /dev/null
+++ b/board/mpc832xemds/u-boot.lds
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc83xx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 1b51078..bc61219 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -92,6 +92,22 @@ int checkcpu(void)
 	case SPR_8360_REV12:
 		puts("MPC8360, ");
 		break;
+	case SPR_8323E_REV10:
+	case SPR_8323E_REV11:
+		puts("MPC8323E, ");
+		break;
+	case SPR_8323_REV10:
+	case SPR_8323_REV11:
+		puts("MPC8323, ");
+		break;
+	case SPR_8321E_REV10:
+	case SPR_8321E_REV11:
+		puts("MPC8321E, ");
+		break;
+	case SPR_8321_REV10:
+	case SPR_8321_REV11:
+		puts("MPC8321, ");
+		break;
 	default:
 		puts("Rev: Unknown\n");
 		return -1;	/* Not sure what this is */
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 7574fab..eb256e5 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -119,6 +119,11 @@ void cpu_init_f (volatile immap_t * im)
 #ifdef CFG_SICRL
 	im->sysconf.sicrl = CFG_SICRL;
 #endif
+	/* DDR control driver register */
+#ifdef CFG_DDRCDR
+	im->sysconf.ddrcdr = CFG_DDRCDR;
+#endif
+
 #ifdef CONFIG_QE
 	/* Config QE ioports */
 	config_qe_ioports();
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 40ba6b0..9fd1bf1 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -107,15 +107,19 @@ int get_clocks(void)
 #endif
 	u32 core_clk;
 	u32 i2c1_clk;
+#if !defined(CONFIG_MPC832X)
 	u32 i2c2_clk;
+#endif
 	u32 enc_clk;
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 ddr_clk;
-#if defined (CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360)
+	u32 ddr_sec_clk;
+#endif
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
 	u32 qepmf;
 	u32 qepdf;
-	u32 ddr_sec_clk;
 	u32 qe_clk;
 	u32 brg_clk;
 #endif
@@ -227,10 +231,12 @@ int get_clocks(void)
 		return -9;
 	}
 #endif
-#if defined (CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
 	i2c1_clk = csb_clk;
 #endif
+#if !defined(CONFIG_MPC832X)
 	i2c2_clk = csb_clk;	/* i2c-2 clk is equal to csb clk */
+#endif
 
 	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
 	case 0:
@@ -249,12 +255,9 @@ int get_clocks(void)
 		/* unkown SCCR_ENCCM value */
 		return -6;
 	}
-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
+
 	lbiu_clk = csb_clk *
 	           (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
-#else
-#error Unknown MPC83xx chip
-#endif
 	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
 	switch (lcrr) {
 	case 2:
@@ -266,17 +269,14 @@ int get_clocks(void)
 		/* unknown lcrr */
 		return -10;
 	}
-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
+
 	ddr_clk = csb_clk *
 		  (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
 	corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
-#if defined (CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360)
 	ddr_sec_clk = csb_clk * (1 +
 		       ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
 #endif
-#else
-#error Unknown MPC83xx chip
-#endif
 
 	corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
 	if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
@@ -306,7 +306,7 @@ int get_clocks(void)
 		return -12;
 	}
 
-#if defined (CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
 	qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
 	qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
 	qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
@@ -322,13 +322,17 @@ int get_clocks(void)
 #endif
 	gd->core_clk = core_clk;
 	gd->i2c1_clk = i2c1_clk;
+#if !defined(CONFIG_MPC832X)
 	gd->i2c2_clk = i2c2_clk;
+#endif
 	gd->enc_clk = enc_clk;
 	gd->lbiu_clk = lbiu_clk;
 	gd->lclk_clk = lclk_clk;
 	gd->ddr_clk = ddr_clk;
-#if defined (CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360)
 	gd->ddr_sec_clk = ddr_sec_clk;
+#endif
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
 	gd->qe_clk = qe_clk;
 	gd->brg_clk = brg_clk;
 #endif
@@ -352,18 +356,21 @@ int print_clock_conf(void)
 	printf("Clock configuration:\n");
 	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
 	printf("  Core:                %4d MHz\n", gd->core_clk / 1000000);
-#if defined (CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
 	printf("  QE:                  %4d MHz\n", gd->qe_clk / 1000000);
+	printf("  BRG:                 %4d MHz\n", gd->brg_clk / 1000000);
 #endif
 	printf("  Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
 	printf("  Local Bus:           %4d MHz\n", gd->lclk_clk / 1000000);
 	printf("  DDR:                 %4d MHz\n", gd->ddr_clk / 1000000);
-#if defined (CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360)
 	printf("  DDR Secondary:       %4d MHz\n", gd->ddr_sec_clk / 1000000);
 #endif
 	printf("  SEC:                 %4d MHz\n", gd->enc_clk / 1000000);
 	printf("  I2C1:                %4d MHz\n", gd->i2c1_clk / 1000000);
+#if !defined(CONFIG_MPC832X)
 	printf("  I2C2:                %4d MHz\n", gd->i2c2_clk / 1000000);
+#endif
 #if defined(CONFIG_MPC8349)
 	printf("  TSEC1:               %4d MHz\n", gd->tsec1_clk / 1000000);
 	printf("  TSEC2:               %4d MHz\n", gd->tsec2_clk / 1000000);
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index f7f8ed0..0bcd0a9 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -30,7 +30,7 @@
 #define UCC_MAX_NUM	8
 
 #define QE_DATAONLY_BASE	(uint)(128)
-#define QE_DATAONLY_SIZE	((uint)(0xc000) - QE_DATAONLY_BASE)
+#define QE_DATAONLY_SIZE	(QE_MURAM_SIZE - QE_DATAONLY_BASE)
 
 /* QE threads SNUM
 */
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index c44a5be..aea455b 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -432,7 +432,12 @@ static int init_phy(struct eth_device *dev)
 	}
 	memset(mii_info, 0, sizeof(*mii_info));
 
-	mii_info->speed = SPEED_1000;
+	if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
+		mii_info->speed = SPEED_1000;
+	} else {
+		mii_info->speed = SPEED_100;
+	}
+
 	mii_info->duplex = DUPLEX_FULL;
 	mii_info->pause = 0;
 	mii_info->link = 1;
@@ -508,7 +513,8 @@ static void adjust_link(struct eth_device *dev)
 		}
 
 		if (mii_info->speed != uec->oldspeed) {
-			switch (mii_info->speed) {
+			if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
+				switch (mii_info->speed) {
 				case 1000:
 					break;
 				case 100:
@@ -531,6 +537,7 @@ static void adjust_link(struct eth_device *dev)
 					printf("%s: Ack,Speed(%d)is illegal\n",
 						dev->name, mii_info->speed);
 					break;
+				}
 			}
 
 			printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index 79dcae4..ff9512f 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -15,6 +15,11 @@
 #define PVR_8360_REV10 (PVR_83xx | 0x0020)
 #define PVR_8360_REV11 (PVR_83xx | 0x0020)
 
+#if defined(CONFIG_MPC832X)
+#undef PVR_83xx
+#define PVR_83xx 0x80840000
+#endif
+
 /*
  * Hardware Implementation-Dependent Register 0 (HID0)
  */
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 67b035c..77a079f 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -60,7 +60,10 @@ typedef struct sysconf83xx {
 	u32 spcr;		/* System Priority Configuration Register */
 	u32 sicrl;		/* System I/O Configuration Register Low */
 	u32 sicrh;		/* System I/O Configuration Register High */
-	u8 res6[0xE4];
+	u8 res6[0x0C];
+	u32 ddrcdr;		/* DDR Control Driver Register */
+	u32 ddrdsr;		/* DDR Debug Status Register */
+	u8 res7[0xD0];
 } sysconf83xx_t;
 
 /*
@@ -274,25 +277,35 @@ typedef struct ddr83xx {
 	ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */
 	u8 res0[0x60];
 	u32 cs_config[4];	/* Chip Select x Configuration */
-	u8 res1[0x78];
+	u8 res1[0x70];
+	u32 timing_cfg_3;	/* SDRAM Timing Configuration 3 */
+	u32 timing_cfg_0;	/* SDRAM Timing Configuration 0 */
 	u32 timing_cfg_1;	/* SDRAM Timing Configuration 1 */
 	u32 timing_cfg_2;	/* SDRAM Timing Configuration 2 */
 	u32 sdram_cfg;		/* SDRAM Control Configuration */
-	u8 res2[4];
+	u32 sdram_cfg2;		/* SDRAM Control Configuration 2 */
 	u32 sdram_mode;		/* SDRAM Mode Configuration */
-	u8 res3[8];
+	u32 sdram_mode2;	/* SDRAM Mode Configuration 2 */
+	u32 sdram_md_cntl;	/* SDRAM Mode Control */
 	u32 sdram_interval;	/* SDRAM Interval Configuration */
-	u8 res9[8];
-	u32 sdram_clk_cntl;
-	u8 res4[0xCCC];
+	u32 ddr_data_init;	/* SDRAM Data Initialization */
+	u8 res2[4];
+	u32 sdram_clk_cntl;	/* SDRAM Clock Control */
+	u8 res3[0x14];
+	u32 ddr_init_addr;	/* DDR training initialization address */
+	u32 ddr_init_ext_addr;	/* DDR training initialization extended address */
+	u8 res4[0xAA8];
+	u32 ddr_ip_rev1;	/* DDR IP block revision 1 */
+	u32 ddr_ip_rev2;	/* DDR IP block revision 2 */
+	u8 res5[0x200];
 	u32 data_err_inject_hi;	/* Memory Data Path Error Injection Mask High */
 	u32 data_err_inject_lo;	/* Memory Data Path Error Injection Mask Low */
 	u32 ecc_err_inject;	/* Memory Data Path Error Injection Mask ECC */
-	u8 res5[0x14];
+	u8 res6[0x14];
 	u32 capture_data_hi;	/* Memory Data Path Read Capture High */
 	u32 capture_data_lo;	/* Memory Data Path Read Capture Low */
 	u32 capture_ecc;	/* Memory Data Path Read Capture ECC */
-	u8 res6[0x14];
+	u8 res7[0x14];
 	u32 err_detect;		/* Memory Error Detect */
 	u32 err_disable;	/* Memory Error Disable */
 	u32 err_int_en;		/* Memory Error Interrupt Enable */
@@ -300,9 +313,9 @@ typedef struct ddr83xx {
 	u32 capture_address;	/* Memory Error Address Capture */
 	u32 capture_ext_address;/* Memory Error Extended Address Capture */
 	u32 err_sbe;		/* Memory Single-Bit ECC Error Management */
-	u8 res7[0xA4];
+	u8 res8[0xA4];
 	u32 debug_reg;
-	u8 res8[0xFC];
+	u8 res9[0xFC];
 } ddr83xx_t;
 
 /*
@@ -607,6 +620,43 @@ typedef struct immap {
 	u8			res10[0xC0000];
 	u8			qe[0x100000];	/* QE block */
 } immap_t;
+
+#elif defined(CONFIG_MPC832X)
+typedef struct immap {
+	sysconf83xx_t		sysconf;	/* System configuration */
+	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
+	rtclk83xx_t		pit;		/* Periodic Interval Timer */
+	gtm83xx_t		gtm[2];		/* Global Timers Module */
+	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
+	reset83xx_t		reset;		/* Reset Module */
+	clk83xx_t		clk;		/* System Clock Module */
+	pmc83xx_t		pmc;		/* Power Management Control Module */
+	qepi83xx_t		qepi;		/* QE Ports Interrupts Registers */
+	u8			res0[0x300];
+	u8			dll_ddr[0x100];
+	u8			dll_lbc[0x100];
+	u8			res1[0x200];
+	qepio83xx_t		qepio;		/* QE Parallel I/O ports */
+	u8			res2[0x800];
+	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t		i2c[2];		/* I2C Controllers */
+	u8			res3[0x1300];
+	duart83xx_t		duart[2];	/* DUART */
+	u8			res4[0x900];
+	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	u8			res5[0x2000];
+	dma83xx_t		dma;		/* DMA */
+	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
+	u8			res6[128];
+	ios83xx_t		ios;		/* Sequencer (IOS) */
+	pcictrl83xx_t		pci_ctrl[1];	/* PCI Controller Control and Status Registers */
+	u8			res7[0x27A00];
+	security83xx_t		security;
+	u8			res8[0xC0000];
+	u8			qe[0x100000];	/* QE block */
+} immap_t;
 #endif
 
 #endif				/* __IMMAP_83xx__ */
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
index f385032..950b949 100644
--- a/include/asm-ppc/immap_qe.h
+++ b/include/asm-ppc/immap_qe.h
@@ -547,4 +547,10 @@ typedef struct qe_immap {
 
 extern qe_map_t *qe_immr;
 
+#if defined(CONFIG_MPC8360)
+#define QE_MURAM_SIZE		0xc000UL
+#elif defined(CONFIG_MPC832X)
+#define QE_MURAM_SIZE		0x4000UL
+#endif
+
 #endif				/* __IMMAP_QE_H__ */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
new file mode 100644
index 0000000..b8bf00f
--- /dev/null
+++ b/include/configs/MPC832XEMDS.h
@@ -0,0 +1,629 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1	/* E300 family */
+#define CONFIG_QE		1	/* Has QE */
+#define CONFIG_MPC83XX		1	/* MPC83xx family */
+#define CONFIG_MPC832X		1	/* MPC832x CPU specific */
+#define CONFIG_MPC832XEMDS	1	/* MPC832XEMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK	66000000	/* in HZ */
+#else
+#define CONFIG_83XX_CLKIN	66000000	/* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_2X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CSB_TO_CLKIN_2X1 |\
+	HRCWL_CORE_TO_CSB_2X1 |\
+	HRCWL_CE_PLL_VCO_DIV_2 |\
+	HRCWL_CE_PLL_DIV_1X1 |\
+	HRCWL_CE_TO_PLL_1X3)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LALE_NORMAL)
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LALE_NORMAL)
+#endif
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRL		0x00000000
+
+#define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000	/* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#define CFG_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
+
+#undef CONFIG_SPD_EEPROM
+#if defined(CONFIG_SPD_EEPROM)
+/* Determine DDR configuration from I2C interface
+ */
+#define SPD_EEPROM_ADDRESS	0x51	/* DDR SODIMM */
+#else
+/* Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE		128	/* MB */
+#define CFG_DDR_CS0_CONFIG	0x80840102
+#define CFG_DDR_TIMING_0	0x00220802
+#define CFG_DDR_TIMING_1	0x3935d322
+#define CFG_DDR_TIMING_2	0x0f9048ca
+#define CFG_DDR_TIMING_3	0x00000000
+#define CFG_DDR_CLK_CNTL	0x02000000
+#define CFG_DDR_MODE		0x44400232
+#define CFG_DDR_MODE2		0x8000c000
+#define CFG_DDR_INTERVAL	0x03200064
+#define CFG_DDR_CS0_BNDS	0x00000007
+#define CFG_DDR_SDRAM_CFG	0x43080000
+#define CFG_DDR_SDRAM_CFG2	0x00401000
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00000000	/* memtest region */
+#define CFG_MEMTEST_END		0x00100000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
+#define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
+
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE |	/* Flash Base address */ \
+			(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
+			BR_V)			/* valid */
+#define CFG_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR		0xF8000000
+#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR	/* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* Access window size 32K */
+
+#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801)	/* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE9f7	/* length 32K */
+
+/*
+ * SDRAM on the Local Bus
+ */
+#undef CFG_LB_SDRAM		/* The board has not SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM	0x80000019	/* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *                 XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM	0xfc006901
+
+#define CFG_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON	0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
+
+/*
+ * CS2 on Local Bus, to PIB
+ */
+#define CFG_BR2_PRELIM	0xf8008801	/* CS2 base address at 0xf8008000 */
+#define CFG_OR2_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */
+
+/*
+ * CS3 on Local Bus, to PIB
+ */
+#define CFG_BR3_PRELIM	0xf8010801	/* CS3 base address at 0xf8010000 */
+#define CFG_OR3_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8323@0"
+#define OF_SOC			"soc8323@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE	0x7F
+#define CFG_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET	0x3000
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI_MMIO_BASE	0x90000000
+#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_PHYS		0xE0300000
+#define CFG_PCI_IO_SIZE		0x100000	/* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS	0x00000000
+#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
+
+#endif	/* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME		"Freescale GETH"
+
+#define CONFIG_UEC_ETH1		/* ETH3 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM	2	/* UCC3 */
+#define CFG_UEC1_RX_CLK		QE_CLK9
+#define CFG_UEC1_TX_CLK		QE_CLK10
+#define CFG_UEC1_ETH_TYPE	FAST_ETH
+#define CFG_UEC1_PHY_ADDR	3
+#define CFG_UEC1_INTERFACE_MODE	ENET_100_MII
+#endif
+
+#define CONFIG_UEC_ETH2		/* ETH4 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM	3	/* UCC4 */
+#define CFG_UEC2_RX_CLK		QE_CLK7
+#define CFG_UEC2_TX_CLK		QE_CLK8
+#define CFG_UEC2_ETH_TYPE	FAST_ETH
+#define CFG_UEC2_PHY_ADDR	4
+#define CFG_UEC2_INTERFACE_MODE	ENET_100_MII
+#endif
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_PCI \
+				| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#else
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PCI \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C)
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C  )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000	/* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE		16384
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	CFG_IBAT3U
+
+#define CFG_IBAT4L	(0)
+#define CFG_IBAT4U	(0)
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_ETHADDR	00:04:9f:ef:03:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
+#endif
+
+#define CONFIG_BAUDRATE	115200
+
+#define CONFIG_LOADADDR	200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+   "netdev=eth0\0"							\
+   "consoledev=ttyS0\0"							\
+   "ramdiskaddr=1000000\0"						\
+   "ramdiskfile=ramfs.83xx\0"						\
+   "fdtaddr=400000\0"							\
+   "fdtfile=mpc832xemds.dtb\0"						\
+   ""
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 504b6a9..52e4369 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -75,6 +75,15 @@
 #define SPR_8360E_REV12			0x80480012
 #define SPR_8360_REV12			0x80490012
 
+#define SPR_8323E_REV10			0x80620010
+#define SPR_8323_REV10			0x80630010
+#define SPR_8321E_REV10			0x80660010
+#define SPR_8321_REV10			0x80670010
+#define SPR_8323E_REV11			0x80620011
+#define SPR_8323_REV11			0x80630011
+#define SPR_8321E_REV11			0x80660011
+#define SPR_8321_REV11			0x80670011
+
 /* SPCR - System Priority Configuration Register
  */
 #define SPCR_PCIHPE			0x10000000	/* PCI Highest Priority Enable */
@@ -167,6 +176,14 @@
 #define SICRH_UC1EOBI			0x00000004
 #define SICRH_UC2E1OBI			0x00000002
 #define SICRH_UC2E2OBI			0x00000001
+
+#elif defined(CONFIG_MPC832X)
+/* SICRL bits - MPC832X specific */
+#define SICRL_LDP_LCS_A			0x80000000
+#define SICRL_IRQ_CKS			0x20000000
+#define SICRL_PCI_MSRC			0x10000000
+#define SICRL_URT_CTPR			0x06000000
+#define SICRL_IRQ_CTPR			0x00C00000
 #endif
 
 /* SWCRR - System Watchdog Control Register
@@ -270,7 +287,7 @@
 #define HRCWL_CORE_TO_CSB_2_5X1		0x00050000
 #define HRCWL_CORE_TO_CSB_3X1		0x00060000
 
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
 #define HRCWL_CEVCOD			0x000000C0
 #define HRCWL_CEVCOD_SHIFT		6
 #define HRCWL_CE_PLL_VCO_DIV_4		0x00000000
@@ -718,7 +735,7 @@
 #define BR_MS_UPMA			0x00000080	/* UPMA */
 #define BR_MS_UPMB			0x000000A0	/* UPMB */
 #define BR_MS_UPMC			0x000000C0	/* UPMC */
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
 #define BR_ATOM				0x0000000C
 #define BR_ATOM_SHIFT			2
 #endif