path: root/packages/linux/linux/simpad/linux-2.6.24-SIMpad-ucb1x00-switches.patch

diff -Nur linux-2.6.24.vanilla/drivers/mfd/Kconfig linux-2.6.24/drivers/mfd/Kconfig
--- linux-2.6.24.vanilla/drivers/mfd/Kconfig	2008-01-24 23:58:37.000000000 +0100
+++ linux-2.6.24/drivers/mfd/Kconfig	2008-02-20 21:17:07.000000000 +0100
@@ -38,4 +38,7 @@
 	tristate "Touchscreen interface support"
 	depends on MCP_UCB1200 && INPUT
 
+config MCP_UCB1200_SWITCHES
+        tristate "SIMpad Switches support"
+        depends on MCP_UCB1200 && INPUT
 endmenu
diff -Nur linux-2.6.24.vanilla/drivers/mfd/Makefile linux-2.6.24/drivers/mfd/Makefile
--- linux-2.6.24.vanilla/drivers/mfd/Makefile	2008-01-24 23:58:37.000000000 +0100
+++ linux-2.6.24/drivers/mfd/Makefile	2008-02-20 21:17:07.000000000 +0100
@@ -8,7 +8,7 @@
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
 obj-$(CONFIG_MCP_UCB1200_TS)	+= ucb1x00-ts.o
-
+obj-$(CONFIG_MCP_UCB1200_SWITCHES) += ucb1x00-switches.o
 ifeq ($(CONFIG_SA1100_ASSABET),y)
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
 endif
diff -Nur linux-2.6.24.vanilla/drivers/mfd/ucb1x00-switches.c linux-2.6.24/drivers/mfd/ucb1x00-switches.c
--- linux-2.6.24.vanilla/drivers/mfd/ucb1x00-switches.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.24/drivers/mfd/ucb1x00-switches.c	2008-02-20 21:17:07.000000000 +0100
@@ -0,0 +1,332 @@
+/*
+ *  linux/drivers/mfd/ucb1x00-switches.c
+ *
+ *  Copyright (C) 2007 Bernhard Guillon.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ *  This driver is for the Switches of Siemens SIMpad (CL4,SL4,SLC), T-Sinus-Pad and
+ *  Swisscom WP50 devices.
+ *
+ *  Six switches are routed to GPIO pins on the UCB1300: S3 -- S8.
+ *
+ *  This driver is based on the 2.4 ucb1x00-switches, the 2.6 ucb1x00-assabet
+ *  and the ucb1x00-ts driver.
+ *
+ *  2007/06/21 mrdata:
+ *             - create new thread kswd() to handle irq_events for ucb1300-gpio's
+ *             - found out, that not every key-press or key-release
+ *               generate a irq_event
+ *               -> establish key_state handling 
+ *                  key_state, key_state_last <-> KEY_PRESS, KEY_RELEASE
+ *               -> after irq_event polling the ucb1300-gpio's till all keys
+ *                  in key_state = KEY_RELEASE 
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/sched.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
+
+#include <asm/dma.h>
+
+#include "ucb1x00.h"
+
+#define KEY_PRESS 1
+#define KEY_RELEASE 0
+
+static int key [6] = { KEY_PROG1,KEY_PROG2,KEY_UP,KEY_DOWN,KEY_LEFT,KEY_RIGHT };
+
+static unsigned short int key_state [6] = { 0, 0, 0, 0, 0, 0};
+static unsigned short int key_state_last [6] = { 1, 1, 1, 1, 1, 1};
+
+struct ucb1x00_switches {
+	struct input_dev	*idev;
+	struct ucb1x00		*ucb;
+	
+	wait_queue_head_t	irq_wait;
+	struct task_struct	*rtask;
+	
+	int 			idx;
+		
+	unsigned int		valid:1;
+};
+
+static int ucb1x00_thread(void *_switches_id)
+{
+	unsigned short int this;
+	int idx_tmp;
+	int i;
+	struct ucb1x00_switches *switches = _switches_id;
+	struct input_dev *idev = switches->idev;
+	struct task_struct *tsk = current;
+	DECLARE_WAITQUEUE(wait, tsk);
+	
+	add_wait_queue(&switches->irq_wait, &wait);
+	
+	while (!kthread_should_stop())
+	{
+		signed long timeout;
+
+		if ((switches->idx >= 0) && (switches->idx <= 5) && (switches->valid == 1))
+		{
+			switches->valid = 0;
+						
+			idx_tmp = switches->idx;
+			
+			ucb1x00_enable(switches->ucb);
+	
+			this = ~ucb1x00_io_read(switches->ucb);
+
+			ucb1x00_disable(switches->ucb);
+					
+			if (key_state[idx_tmp] == KEY_RELEASE)
+			{
+				key_state_last[idx_tmp] = KEY_RELEASE;
+				key_state[idx_tmp] = KEY_PRESS;
+	
+				input_report_key(idev, key[idx_tmp], KEY_PRESS);
+				input_sync(idev);							
+			}
+			
+			for (i = 0; i < 6; i++)
+			{
+				if ((key_state[i] == KEY_RELEASE) && (((this & (1 << i)) ? 1 : 0) == KEY_PRESS))
+				{
+					key_state_last[i] = KEY_RELEASE;
+					key_state[i] = KEY_PRESS;
+							
+					input_report_key(idev, key[i], KEY_PRESS);
+					input_sync(idev);
+				}
+			}
+										
+			for(;;)
+			{			    
+				ucb1x00_enable(switches->ucb);
+				this = ~ucb1x00_io_read(switches->ucb);
+				ucb1x00_disable(switches->ucb);
+															
+				for (i = 0; i < 6; i++)
+				{						
+					if ((key_state[i] == KEY_PRESS) && (((this & (1 << i)) ? 1 : 0) == KEY_RELEASE))
+					{
+						key_state_last[i] = KEY_PRESS;
+						key_state[i] = KEY_RELEASE;
+							
+						input_report_key(idev, key[i], KEY_RELEASE);
+						input_sync(idev);
+					}
+						
+					if ((key_state[i] == KEY_RELEASE) && (((this & (1 << i)) ? 1 : 0) == KEY_PRESS))
+					{
+						key_state_last[i] = KEY_RELEASE;
+						key_state[i] = KEY_PRESS;
+							
+						input_report_key(idev, key[i], KEY_PRESS);
+						input_sync(idev);
+					}
+						
+				}
+				
+				// left loop, if no key press detect	
+				if ((this | 0xff80) == 0xff80)
+				{
+					break;
+				}
+											
+				set_task_state(tsk, TASK_INTERRUPTIBLE);
+					
+				try_to_freeze();
+					
+				timeout = HZ / 100;
+					
+				schedule_timeout(timeout);
+			}					
+		}
+				
+		set_task_state(tsk, TASK_INTERRUPTIBLE);
+		
+		try_to_freeze();
+		
+		timeout = MAX_SCHEDULE_TIMEOUT;
+		
+		schedule_timeout(timeout);
+	}
+	
+	remove_wait_queue(&switches->irq_wait, &wait);
+	
+	switches->rtask = NULL;
+	
+	return 0;
+}
+
+
+static void ucb1x00_dev_irq(int idx, void *id)
+{
+	struct ucb1x00_switches *switches = id;
+
+	switches->idx = idx;
+	switches->valid = 1;	
+	
+	wake_up(&switches->irq_wait);
+}
+
+static int ucb1x00_switches_add(struct ucb1x00_dev *dev)
+{
+	struct ucb1x00_switches *switches;
+	struct input_dev *idev;
+	int err,i;
+	
+	switches = kzalloc(sizeof(struct ucb1x00_switches), GFP_KERNEL);
+	idev = input_allocate_device();
+
+	if (!switches || !idev) {
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	switches->ucb = dev->ucb;
+	
+	idev->private    = switches;
+	idev->name       = "SIMpad Switches";
+	idev->id.product = switches->ucb->id;
+	
+	__set_bit(EV_KEY,    idev->evbit);
+	__set_bit(EV_REP,    idev->evbit);
+	__set_bit(KEY_PROG1,    idev->keybit);
+	__set_bit(KEY_PROG2,    idev->keybit);
+	__set_bit(KEY_UP,    idev->keybit);
+	__set_bit(KEY_DOWN,    idev->keybit);
+	__set_bit(KEY_LEFT,    idev->keybit);
+	__set_bit(KEY_RIGHT,    idev->keybit);
+	
+	err = input_register_device(idev);
+	if (err)
+		goto fail;
+	switches->idev = idev;
+	dev->priv = switches;
+	
+	BUG_ON(switches->rtask);
+	
+	init_waitqueue_head(&switches->irq_wait);
+	
+	ucb1x00_enable(switches->ucb);
+
+	ucb1x00_io_set_dir(switches->ucb,
+			   UCB_IO_0 | UCB_IO_1 | UCB_IO_2 |
+			   UCB_IO_3 | UCB_IO_4 | UCB_IO_5, 
+			   UCB_IO_8 | UCB_IO_9);
+
+	ucb1x00_disable(switches->ucb);
+	
+	for (i = 0; i < 6; ++i) {
+		ucb1x00_enable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
+
+		if (ucb1x00_hook_irq(switches->ucb, i, ucb1x00_dev_irq, switches) < 0) {
+			printk(KERN_ERR "unable to hook IRQ for "
+			       "UCB1300 SWITCH_%d\n", i);
+			return -EBUSY;
+		}
+	}
+	
+	switches->rtask = kthread_run(ucb1x00_thread, switches, "kswd");
+	if (!IS_ERR(switches->rtask))
+	{
+	    return 0;
+	}
+	else
+	{
+		input_unregister_device(switches->idev);
+		
+		for (i = 5; i >= 0; --i) {
+			ucb1x00_disable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
+
+			/* Only error conditions are ENOENT and EINVAL; silently
+			 * ignore:
+			 */
+			ucb1x00_free_irq(switches->ucb, i, NULL);
+		}
+		switches->rtask = NULL;
+		ucb1x00_disable(switches->ucb);
+		kfree(switches);
+		
+		return -EFAULT;
+	}
+
+fail:
+	input_free_device(idev);
+	kfree(switches);
+	return err;
+
+}
+
+static void ucb1x00_switches_remove(struct ucb1x00_dev *dev)
+{
+	int i;
+	struct ucb1x00_switches *switches = dev->priv;
+	
+	if (switches->rtask)
+		kthread_stop(switches->rtask);
+		
+	switches->rtask = NULL;
+		
+	input_unregister_device(switches->idev);
+		
+	for (i = 5; i >= 0; --i) {
+		ucb1x00_disable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
+
+		/* Only error conditions are ENOENT and EINVAL; silently
+		 * ignore:
+		 */
+		ucb1x00_free_irq(switches->ucb, i, NULL);
+	}
+	ucb1x00_disable(switches->ucb);
+	kfree(switches);
+}
+
+#ifdef CONFIG_PM
+static int ucb1x00_switches_resume(struct ucb1x00_dev *dev)
+{
+	struct ucb1x00_switches *switches = dev->priv;
+	
+	if (switches->rtask != NULL)
+	{
+		switches->valid = 0;
+		wake_up(&switches->irq_wait);
+		
+		printk(KERN_DEBUG "ucb1x00-switches.c -> _switches_resume() kswd - restart *DONE*\n");
+	}
+	return 0;
+}
+#else
+#define ucb1x00_switches_resume NULL
+#endif
+
+static struct ucb1x00_driver ucb1x00_switches_driver = {
+	.add	= ucb1x00_switches_add,
+	.remove	= ucb1x00_switches_remove,
+	.resume = ucb1x00_switches_resume,
+};
+
+static int __init ucb1x00_switches_init(void)
+{
+	return ucb1x00_register_driver(&ucb1x00_switches_driver);
+}
+
+static void __exit ucb1x00_switches_exit(void)
+{
+	ucb1x00_unregister_driver(&ucb1x00_switches_driver);
+}
+
+module_init(ucb1x00_switches_init);
+module_exit(ucb1x00_switches_exit);
+
+MODULE_AUTHOR("Bernhard Guillon <Bernhard.Guillon@opensimpad.org>");
+MODULE_DESCRIPTION("UCB1x00 Switches driver for Siemens SIMpad");
+MODULE_LICENSE("GPL");