path: root/recipes/linux/linux-2.6.26/boc01/013-081212-lcd.patch

Index: linux-2.6.26/drivers/video/Kconfig
===================================================================
--- linux-2.6.26.orig/drivers/video/Kconfig	2008-07-13 23:51:29.000000000 +0200
+++ linux-2.6.26/drivers/video/Kconfig	2008-12-09 10:01:14.000000000 +0100
@@ -480,6 +480,17 @@
 	  this driver, say Y or M; otherwise say N. You must specify the
 	  GPIO IO address to be used for setting control and data.
 
+config FB_NOVA
+	tristate "Nova 7506 Monochrome LCD board support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  This enables support for the Nova 7506 Monochrome LCD board. The board
+	  is based on the NT7506 lcd controller.
+
 config FB_ATARI
 	bool "Atari native chipset support"
 	depends on (FB = y) && ATARI
Index: linux-2.6.26/drivers/video/Makefile
===================================================================
--- linux-2.6.26.orig/drivers/video/Makefile	2008-07-13 23:51:29.000000000 +0200
+++ linux-2.6.26/drivers/video/Makefile	2008-12-09 10:01:14.000000000 +0100
@@ -13,8 +13,8 @@
 
 obj-$(CONFIG_VT)		  += console/
 obj-$(CONFIG_LOGO)		  += logo/
-obj-y				  += backlight/ display/
-
+obj-y				 			+= backlight/ display/
+obj-$(CONFIG_FB_NOVA)    	   += N7506fb.o
 obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
 obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
 obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
Index: linux-2.6.26/drivers/video/N7506fb.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.26/drivers/video/N7506fb.c	2008-12-09 10:03:34.000000000 +0100
@@ -0,0 +1,631 @@
+/*
+ * linux/drivers/video/N7506fb.c -- FB driver for Nova NT7506 monochrome LCD board
+ *
+ * Copyright (C) 2008, Alexandre Coffignal <alexandre.coffignal@cenosys.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on arcfb.c by Jaya Kumar
+ *
+ * This driver was written to be used with the Nova 7506 LCD board.
+ *
+ *
+ *
+ *
+ * Nova uses a
+ * set of NT7506 chips that control individual 128x128 LCD matrices.
+ * The interface between the board and the host is TTL based GPIO.
+ *
+ * General notes:
+ * - User must set tuhold. It's in microseconds. According to the 108 spec,
+ *   the hold time is supposed to be at least 1 microsecond.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/NT7506.h>
+#include <linux/platform_device.h>
+
+#include <linux/uaccess.h>
+
+#define floor8(a) (a&(~0x07))
+#define floorXres(a,xres) (a&(~(xres - 1)))
+#define iceil8(a) (((int)((a+7)/8))*8)
+#define ceil128(a) (a|0x7F)
+#define ceilXres(a,xres) (a|(xres - 1))
+
+//NT7506 Hardware
+#define LCD_RST			0x08
+#define LCD_RSTN		0x00
+#define LCD_BCKLIGH		0x04
+#define LCD_BCKLIGHN	0x00
+#define LCD_RS			0x02
+#define LCD_RSN			0x00
+#define LCD_ERD			0x01
+#define LCD_ERDN		0x00
+
+//Base address
+#define LCD_BASE 0xf0000000
+#define LCD_SIZE 0x2
+
+#define CONTRASTE 0xF
+#define FRAME_PER_SECOND 5
+
+static struct resource *lcd_mem = NULL;
+static void * _lcd_io = NULL;
+static unsigned long tuhold;
+struct fb_info *info;
+static struct timer_list fb_timer;
+static char _refresh;
+static char _fps =FRAME_PER_SECOND;
+static char _backlight=1;
+
+struct novafb_par {
+	atomic_t ref_count;
+	unsigned char cslut[9];
+	struct fb_info *info;
+	unsigned int irq;
+	spinlock_t lock;
+};
+
+static struct fb_fix_screeninfo novafb_fix __initdata = {
+	.id =		"novafb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_MONO01,
+	.xpanstep =	1,
+	.ypanstep =	1,
+	.ywrapstep =	0,
+	.line_length=16,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo novafb_var __initdata = {
+	.xres		= 128,
+	.yres		= 128,
+	.xres_virtual	= 128,
+	.yres_virtual	= 128,
+	.bits_per_pixel	= 1,
+	.nonstd		= 1,
+};
+
+
+static void NT7506_init_lcd(char ael);
+
+static void NT7506_writeb_ctl(unsigned char value,char backlight)
+{
+	unsigned short svalue;
+	char bl;
+	if(backlight)
+		bl=LCD_BCKLIGH;
+	else
+		bl=LCD_BCKLIGHN;
+
+	svalue=value<<8 | LCD_RSN | LCD_RST | LCD_ERDN | bl;
+	iowrite16(svalue, _lcd_io);
+	udelay(tuhold);
+	//The data on DB0/7 are latched at the falling edge of the E_RD signal
+	svalue=value<<8 | LCD_RSN | LCD_RST | LCD_ERD | bl;
+	iowrite16(svalue, _lcd_io);
+	udelay(tuhold);
+}
+
+static void NT7506_writeb_data(unsigned char value,char backlight)
+{
+	unsigned short svalue;
+	char bl;
+	if(backlight)
+		bl=LCD_BCKLIGH;
+	else
+		bl=LCD_BCKLIGHN;
+	svalue=value<<8|LCD_RS |LCD_RST | LCD_ERD | bl ;
+	iowrite16(svalue, _lcd_io);
+	udelay(tuhold);
+	//The data on DB0/7 are latched at the falling edge of the E_RD signal
+	svalue=value<<8|LCD_RS |LCD_RST | LCD_ERDN | bl;
+	iowrite16(svalue, _lcd_io);
+	udelay(tuhold);
+}
+
+static void NT7506_set_start_line(unsigned char y)
+{
+	NT7506_writeb_ctl(NT_START_LINE,_backlight);
+	NT7506_writeb_ctl(y,_backlight);
+}
+
+static void NT7506_set_yaddr(unsigned char y)
+{
+	NT7506_writeb_ctl(NT_PAGE_ADDR+y,_backlight);
+}
+
+static void NT7506_set_xaddr(unsigned char x)
+{
+	NT7506_writeb_ctl(NT_COL_MSB | (x >> 0x04),_backlight); //Send high nibble
+	NT7506_writeb_ctl(NT_COL_LSB | (x & 0x0F) ,_backlight); //Send low nibble
+}
+
+/* main novafb functions */
+
+static int novafb_open(struct fb_info *info, int user)
+{
+	struct novafb_par *par = info->par;
+	atomic_inc(&par->ref_count);
+	return 0;
+}
+
+static int novafb_release(struct fb_info *info, int user)
+{
+	struct novafb_par *par = info->par;
+	int count = atomic_read(&par->ref_count);
+	if (!count)
+		return -EINVAL;
+	atomic_dec(&par->ref_count);
+	return 0;
+}
+
+static int novafb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	if ((var->vmode & FB_VMODE_YWRAP) && (var->yoffset < 128)
+		&& (info->var.yres <= 128))
+	{
+		NT7506_set_start_line(var->yoffset);
+		info->var.yoffset = var->yoffset;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void novafb_lcd_update(struct novafb_par *par, unsigned int dx,
+			unsigned int dy, unsigned int w, unsigned int h)
+{
+	int bit,x,y,xfb,yfb,width,height,i;
+	char mask=0;
+	char dest[2048];
+	char * src;
+	char value;
+	src = (unsigned char __force *) par->info->screen_base;
+	for(i=0;i<2048;i++)
+	{
+		dest[i]=0;
+	}
+	for(x=0;x<128/*(width)*/;x++)
+	{
+		for(y=0;y<16/*height/8*/;y++)
+		{
+			xfb=x/8;
+			yfb=y*8;
+
+			for(bit=0;bit<8;yfb++,bit++)
+			{
+				mask = (1<<(7-(x%8)));
+				if(((src[yfb*16+xfb]&mask)))
+					value=1;
+				else
+					value=0;
+
+				dest[y*128+x]+= (value<<bit);
+			}
+		}
+	}
+
+	height=16;
+	width=128;
+
+	for (y = 0; y < height; y++)
+	{
+		NT7506_set_yaddr(y);
+		NT7506_set_xaddr(0);
+		for (x = 0; x < width; x++)
+		{
+			NT7506_writeb_data(dest[y*128+x],_backlight);
+			NT7506_writeb_data(0x00,_backlight);
+		}
+		NT7506_writeb_data((unsigned char)0,_backlight);
+	}
+}
+
+static void novafb_fillrect(struct fb_info *info,  const struct fb_fillrect *rect)
+{
+
+//	sys_fillrect(info, rect);
+
+}
+
+
+
+static void novafb_copyarea(struct fb_info *info,
+			   const struct fb_copyarea *area)
+{
+//	sys_copyarea(info, area);
+}
+
+
+static void novafb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct novafb_par *par = info->par;
+
+	int xfb,yfb,i=0;
+	char * src = (unsigned char __force *) par->info->screen_base;
+
+	for(yfb=image->dy;yfb<(image->height+image->dy);yfb++)
+	{
+		for(xfb=(image->dx)/8;xfb<(image->dx+image->width)/8;xfb++)
+		{
+			src[yfb*16+xfb]=image->data[i++];
+		}
+	}
+
+}
+
+/*
+ * this is the access path from userspace. they can seek and write to
+ * the fb. it's inefficient for them to do anything less than 128*8
+ * writes since we update the lcd in each write() anyway.
+ */
+static ssize_t novafb_write(struct fb_info *info, const char __user *buf,
+			   size_t count, loff_t *ppos)
+{
+	unsigned long p;
+	int err=-EINVAL;
+	unsigned int fbmemlength   ;
+	struct novafb_par *par;
+	unsigned int xres;
+	p = *ppos;
+	par = info->par;
+	xres = info->var.xres;
+	fbmemlength = (xres * info->var.yres)/8;
+
+	if (p > fbmemlength)
+	{
+		return -ENOSPC;
+	}
+	err = 0;
+	if ((count + p) > fbmemlength) {
+		count = fbmemlength - p;
+		err = -ENOSPC;
+	}
+
+	if (count) {
+		char *base_addr;
+		base_addr = (char __force *)info->screen_base;
+		count -= copy_from_user(base_addr + p, buf, count);
+		*ppos += count;
+		err = -EFAULT;
+	}
+	if (count)
+	{
+		return count;
+	}
+	return err;
+}
+
+static int novafb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+	unsigned long off;
+	unsigned long start;
+	u32 len;
+
+	if (vma->vm_end - vma->vm_start == 0)
+		return 0;
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	off = vma->vm_pgoff << PAGE_SHIFT;
+	start = info->fix.smem_start;
+	len = info->fix.smem_len;
+	if (off >= len)
+	{
+		return -EINVAL;
+
+	}
+	if ((vma->vm_end - vma->vm_start + off) > len)
+	{
+			return -EINVAL;
+	}
+	off += start;
+	vma->vm_pgoff = off >> PAGE_SHIFT;
+	if (remap_pfn_range(vma, vma->vm_start, virt_to_phys((void *)info->fix.smem_start) >> PAGE_SHIFT,
+			info->fix.smem_len, vma->vm_page_prot))
+
+	{
+		return -EAGAIN;
+	}
+	return 0;
+
+}
+static int novafb_ioctl(struct fb_info *info,
+			  unsigned int cmd, unsigned long arg)
+{
+	unsigned char contrast;
+	unsigned char frame_rate;
+	unsigned char backlight;
+	switch (cmd)
+	{
+		case FBIO_FRAMERATE:
+		{
+
+			if (get_user(frame_rate, (unsigned char *)arg))
+				return -EFAULT;
+			printk(KERN_INFO "fb0: framerate=%d Hz\n",frame_rate);
+			_fps=frame_rate;
+			return 0;
+		}
+		case FBIO_CONTRAST:
+		{
+			_refresh=0;
+			if (get_user(contrast, (unsigned char *)arg))
+				return -EFAULT;
+			printk(KERN_INFO "fb0: contrast=%d\n",contrast);
+			NT7506_writeb_ctl(NT_ELEC_VOL,_backlight);	NT7506_writeb_ctl(contrast,_backlight);
+			_refresh=1;
+			return 0;
+		}
+		case FBIO_BACKLIGHT:
+		{
+			_refresh=0;
+			if (get_user(backlight, (unsigned char *)arg))
+				return -EFAULT;
+			if(backlight)
+			{
+				printk(KERN_INFO "fb0: Backlight ON\n");
+				_backlight=1;
+			}
+			else
+			{
+				printk(KERN_INFO "fb0: Backlight OFF\n");
+				_backlight=0;
+			}
+			_refresh=1;
+			return 0;
+
+		}
+
+
+		default:
+			return -EINVAL;
+	}
+
+}
+
+static struct fb_ops novafb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_open	= novafb_open,
+	.fb_read        = fb_sys_read,
+	.fb_write	= novafb_write,
+	.fb_release	= novafb_release,
+	.fb_pan_display	= novafb_pan_display,
+	.fb_fillrect	= novafb_fillrect,
+	.fb_copyarea	= novafb_copyarea,
+	.fb_imageblit	= novafb_imageblit,
+	.fb_ioctl 		= novafb_ioctl,
+	.fb_mmap		=novafb_mmap,
+};
+
+
+static void
+novafb_refresh(int ignore_me )
+{
+	struct novafb_par *par = info->par;
+	if(_refresh)
+	{
+		novafb_lcd_update(par, 0, 0, 128,128);
+		fb_timer.expires = jiffies + (HZ/_fps);
+		add_timer(&fb_timer);
+	}
+	else
+	{
+		fb_timer.expires = jiffies + (HZ/_fps);
+		add_timer(&fb_timer);
+	}
+}
+
+static int
+__init novafb_probe(struct platform_device *dev)
+{
+
+	int retval = -ENOMEM;
+	char * src;
+	int i;
+
+	struct novafb_par *par;
+	static unsigned char *videomemory;
+	static 	int videomemorysize;
+
+	NT7506_init_lcd(CONTRASTE);
+
+	videomemorysize = (128*128/8)*2;
+
+	if (!(videomemory = kmalloc(videomemorysize,GFP_ATOMIC)))
+		return retval;
+	memset(videomemory, 0, videomemorysize);
+
+	info = framebuffer_alloc(sizeof(struct novafb_par), &dev->dev);
+
+	if (!info)
+		goto err;
+	info->screen_base = (char __iomem *)videomemory;
+	info->fbops = &novafb_ops;
+
+	info->var = novafb_var;
+	info->fix = novafb_fix;
+	info->fix.smem_start=(unsigned long)videomemory;
+	info->fix.smem_len	= videomemorysize;
+
+	par = info->par;
+	par->info = info;
+	par->cslut[0] = 0x00;
+	par->cslut[1] = 0x06;
+	src = (unsigned char __force *) par->info->screen_base;
+	for(i=0;i<videomemorysize;i++)
+	{
+		src[i]=0;
+	}
+	info->flags = FBINFO_FLAG_DEFAULT;
+	spin_lock_init(&par->lock);
+	platform_set_drvdata(dev, info);
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err1;
+
+	init_timer(&fb_timer);
+	fb_timer.function = novafb_refresh;
+	fb_timer.expires = jiffies + (HZ / _fps);
+	add_timer(&fb_timer);
+
+	printk(KERN_INFO
+	       "fb%d: nova frame buffer device, using %dK of video memory\n",
+	       info->node, videomemorysize >> 10);
+	return 0;
+err1:
+	framebuffer_release(info);
+err:
+	vfree(videomemory);
+	return retval;
+}
+
+static int novafb_remove(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	if (info) {
+		unregister_framebuffer(info);
+		vfree((void __force *)info->screen_base);
+		framebuffer_release(info);
+	}
+	return 0;
+}
+
+static struct platform_driver novafb_driver = {
+	.probe	= novafb_probe,
+	.remove = novafb_remove,
+	.driver	= {
+		.name	= "novafb",
+	},
+};
+
+static struct platform_device *novafb_device;
+
+static int __init novafb_init(void)
+{
+	int ret;
+
+
+	if (!(lcd_mem = request_mem_region(LCD_BASE, LCD_SIZE, "mpc8313-lcd")))
+		return -ENOMEM;
+
+	if (!(_lcd_io = ioremap(LCD_BASE, LCD_SIZE)))
+	{
+		release_mem_region(LCD_BASE, LCD_SIZE);
+		lcd_mem = NULL;
+		return -ENOMEM;
+	}
+	ret = platform_driver_register(&novafb_driver);
+
+	if (!ret) {
+		novafb_device = platform_device_alloc("novafb", 0);
+		if (novafb_device)
+		{
+			ret = platform_device_add(novafb_device);
+		}
+		else
+		{
+			ret = -ENOMEM;
+		}
+		if (ret)
+		{
+			platform_device_put(novafb_device);
+			platform_driver_unregister(&novafb_driver);
+		}
+
+	}
+
+
+	return ret;
+
+}
+
+
+static void NT7506_init_lcd(char ael)
+{
+	/* this resets the lcd*/
+	char bl;
+	if(_backlight)
+		bl=LCD_BCKLIGH;
+	else
+		bl=LCD_BCKLIGHN;
+
+	iowrite16(LCD_RSTN | LCD_ERD | bl, _lcd_io);
+	udelay(100);
+	iowrite16(LCD_RST| LCD_ERD | bl, _lcd_io);
+	udelay(200);
+	/* Soft reset*/
+	NT7506_writeb_ctl(NT_RESET,_backlight);
+	/* Disable ICON display*/
+	NT7506_writeb_ctl(NT_ICON|OFF,_backlight);
+	/* Sets the duty ratio 1/128*/
+	NT7506_writeb_ctl(NT_DUTY,_backlight);		NT7506_writeb_ctl(DUTY_1_128,_backlight);
+	/* Sets reverse direction between RAM column address and segment driver*/
+	NT7506_writeb_ctl(NT_ADC_REV,_backlight);
+	NT7506_writeb_ctl(NT_SHL_NOR,_backlight);
+	/* Enales the built in Oscillator circuit.*/
+	NT7506_writeb_ctl(NT_OSC,_backlight);
+	/* Set Initial row to 0*/
+	NT7506_writeb_ctl(NT_COM0,_backlight);		NT7506_writeb_ctl(0,_backlight);
+	/* Sets DC-DC*/
+	NT7506_writeb_ctl(NT_DCDC|TIME6,_backlight);
+	/* Selects resistance ratio of the internal resistor*/
+	NT7506_writeb_ctl(NT_REG_RES|RES_7_2,_backlight);
+	/* set Reference Voltage mode*/
+	NT7506_writeb_ctl(NT_ELEC_VOL,_backlight);	NT7506_writeb_ctl(ael,_backlight);
+	/* Selects LCD bias ratio*/
+	NT7506_writeb_ctl(NT_BIAS|BIAS_1_11,_backlight);
+
+	NT7506_writeb_ctl(NT_DATA_DIR,_backlight);	NT7506_writeb_ctl(0,_backlight);
+	NT7506_writeb_ctl(NT_FRC_PWM|PWM15,_backlight);
+	/* Select power circuit functions */
+	NT7506_writeb_ctl(NT_POWER|VC,_backlight);
+	udelay(5000);
+	NT7506_writeb_ctl(NT_POWER|VC|VR,_backlight);
+	udelay(5000);
+	NT7506_writeb_ctl(NT_POWER|VC|VR|VF,_backlight);
+	udelay(5000);
+	/* Reverses the display status on LCD panel */
+	NT7506_writeb_ctl(NT_REV_DISP|OFF,_backlight);
+	/* Forces the whole LCD points to be turned on regardless of the contents of the display data RAM*/
+	NT7506_writeb_ctl(NT_DISP|ON,_backlight);
+	/* Set Initial Start Line Address */
+	NT7506_writeb_ctl(NT_START_LINE,_backlight);	NT7506_writeb_ctl(0x00,_backlight);
+	_refresh=1;
+}
+
+static void __exit novafb_exit(void)
+{
+	if (lcd_mem)
+		release_mem_region(LCD_BASE, LCD_SIZE);
+	lcd_mem = NULL;
+	platform_device_unregister(novafb_device);
+	platform_driver_unregister(&novafb_driver);
+}
+
+module_param(tuhold, ulong, 0);
+MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Nova board");
+
+module_init(novafb_init);
+module_exit(novafb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for nova NT7506 monochrome LCD board");
+MODULE_AUTHOR("Alexandre Coffignal");
+MODULE_LICENSE("GPL");
+
Index: linux-2.6.26/include/linux/NT7506.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.26/include/linux/NT7506.h	2008-12-09 10:04:16.000000000 +0100
@@ -0,0 +1,73 @@
+
+/*
+ * (C) Copyright 2008
+ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __LINUX_NOVAFB_H__
+#define __LINUX_NOVAFB_H__
+
+
+//NT7506 Instructions
+#define NT_ICON	0xA2
+#define NT_PAGE_ADDR 		0xB0
+#define NT_COL_MSB		0x10
+#define NT_COL_LSB		0x00
+#define NT_DISP			0xAE
+#define NT_START_LINE		0x40
+#define	NT_COM0			0x44
+#define	NT_DUTY			0x48
+#define DUTY_1_128			0x80
+#define NT_REV_DISP		0xA6
+#define NT_POWER		0x28
+#define VC				0x04
+#define VR				0x02
+#define VF				0x01
+#define	NT_DCDC			0x64
+#define	TIME6				0x03
+#define	NT_REG_RES		0x20
+#define	RES_7_2				0x07
+#define	NT_ELEC_VOL		0x81
+#define	NT_BIAS			0x50
+#define BIAS_1_11			0x06
+#define	NT_ADC_NOR		0xA0
+#define	NT_ADC_REV		0xA1
+#define	NT_SHL_NOR		0xC0
+#define	NT_SHL_REV		0xC8
+#define	NT_OSC			0xAB
+#define NT_RESET		0xE2
+#define NT_DATA_DIR		0xe8
+#define NT_FRC_PWM		0x90
+#define PWM15				0x03
+
+#define ON		0x01
+#define OFF		0x00
+
+
+
+#define FBIO_FRAMERATE		_IOR('f', 1, char)
+#define FBIO_CONTRAST		_IOR('f', 2, char)
+#define FBIO_BACKLIGHT		_IOR('f', 3, char)
+
+
+#endif
+