1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
|
This patch adds the configuration needed for the LCD display on the n30.
Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c
===================================================================
--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c
+++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c
@@ -44,7 +44,9 @@
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
#include <asm/arch/iic.h>
+#include <asm/arch/fb.h>
#include <linux/serial_core.h>
@@ -85,6 +87,40 @@ static struct s3c2410_uartcfg n30_uartcf
},
};
+static struct s3c2410fb_mach_info n30_lcdcfg __initdata = {
+ .fixed_syncs= 1,
+ .regs={
+ .lcdcon1= S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x0A),
+
+ .lcdcon2= S3C2410_LCDCON2_VBPD(1) |
+ S3C2410_LCDCON2_LINEVAL(319) |
+ S3C2410_LCDCON2_VFPD(2) |
+ S3C2410_LCDCON2_VSPW(1),
+
+ .lcdcon3= S3C2410_LCDCON3_HBPD(39) |
+ S3C2410_LCDCON3_HOZVAL(239) |
+ S3C2410_LCDCON3_HFPD(2),
+
+ .lcdcon4= S3C2410_LCDCON4_MVAL(13) |
+ S3C2410_LCDCON4_HSPW(39),
+
+ .lcdcon5= S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+ .lpcsel= 0x06,
+
+ .width= 240,
+ .height= 320,
+ .xres= {240,240,240},
+ .yres= {320,320,320},
+ .bpp= {16,16,16},
+};
+
static struct platform_device *n30_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
@@ -123,6 +159,8 @@ static void __init n30_init_irq(void)
static void __init n30_init(void)
{
+ s3c24xx_fb_set_platdata(&n30_lcdcfg);
+
s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
/* Turn off suspend on both USB ports, and switch the
|
