aboutsummaryrefslogtreecommitdiffstats
path: root/meta-networking
AgeCommit message (Collapse)Author
2016-01-26opensaf: 4.6.0 -> 4.7.0Dai Caiyun
1) Upgrade opensaf from 4.6.0 to 4.7.0. 2) Delete two patches,since they are not needed any more. Revert_imma_client_node_replyPending_to_unsigned_char.patch Fix_GCC_5.1.0_compiler_warning.patch Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-26dhcpcd: add recipe for dhcpcdNate Karstens
Adds a new recipe for dhcpcd version 6.10.0. Signed-off-by: Nate Karstens <nate.karstens@garmin.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-26ctdb: Fix rootfs creation errorsMark Asselstine
While building an image I was getting an error during rootfs creation that ctdb was conflicting with base-files as both were creating '/var/run': warning: Removing ctdb-2.5.1-r0@core2_64 due to file /var/run \ conflicting with base-files-3.0.14-r89@genericx86_64 This is normally a volatile directory so we have no need to include this in the ctdb package, so revert the actions of the Makefile by deleting the directory. Although /run and $localstatedir/run are linked to be consistent we update the .service file to use the latter. To ensure the 'ctdb' subdir exists we patch the use of RuntimeDirectory= in to the .service file. This will compensate for our removal of this directory creation from the Makefile. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20geoip: add ptest functionalityJoe Slater
Also make geoip package rdepend on geoip-database and add symbolic link to GeoIPCity.dat. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20openvpn: 2.3.7 -> 2.3.8Dai Caiyun
Upgrade openvpn from 2.3.7 to 2.3.8. Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20recipes-connectivity/samba: Only rmdir directories that existmike.looijmans@topic.nl
Depending on PACKAGECONFIG selection, the /run/samba directory may not have been created. Make the do_install_append handle both situations by checking whether these directories exist before attempting to remove them. This fixes do_install failing with an error like this: rmdir: failed to remove '/.../samba/4.1.12-r0/image/run/samba': No such file or directory Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20xl2tpd: modify recipes to avoid forced internet accessJoe Slater
We should always specify a commit id for git SRCREV or we will try to access the upstream repo when fetching. In addition, if our PV is just "git" we will access upstream when doing archiver functions, so we should specify PV for xyz_git.bb recipes. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20dovecot: 2.2.18 -> 2.2.21Dai Caiyun
Upgrade dovecot from 2.2.18 to 2.2.21. Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20stunnel: 5.21 -> 5.28Dai Caiyun
Upgrade stunnel from 5.21 to 5.28. Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20postfix: 3.0.2 -> 3.0.3Dai Caiyun
Upgrade postfix from 3.0.2 to 3.0.3. Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20rp-pppoe: 3.11 -> 3.12Dai Caiyun
Upgrade rp-pppoe from 3.11 to 3.12. Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20dnsmasq: Listen only on loopback and disable DHCPOvidiu Vancea
Dnsmasq functions as DHCP and DNS servers by default and listens on all interfaces. This conflicts with other DHCP or DNS servers already on the network and corrupts DNS configuration on Windows systems. We noticed that after installing docker, the Linux system became a magnet for DNS requests coming from Windows systems. Dnsmasq is a dependency for lxc which is recommended for docker. Windows periodically broadcasts DHCPInform and DHCP servers reply with DHCPAck. If the DHCPAck from the Linux target reaches the Windows system first, Windows changes its DNS server IP to the Linux system running dnsmasq. Dnsmasq ends up forwarding the DNS requests to the official DNS server and replies back the answer to the original requestor. The Linux system transparently becomes a DNS proxy on the subnet. Signed-off-by: Ovidiu Vancea <ovidiu.vancea@ni.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20samba: backport patches for cross-compilingJackie Huang
* Adds a new mode for samba cross-compiling: When both --cross-answers and --cross-execute are set, this means: - Use cross-answers - If answer is unknown, then instead of adding UNKNOWN to the cross-answers file and failing configure, the new mode runs cross-execute to determine the answer and adds that to the cross-answers file. * And some fixes and improvements for cross-compiling. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20samba: fix the incorrect tmpfiles installed directoryJackie Huang
- The tmpfiles are always installed in /usr/lib even for multilib. - It makes no sense to have two tmpfiles in both /usr/lib/tmpfiles.d and /etc/tmpfiles.d, install it as one in /etc/tmpfiles.d. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20libtalloc: upgrade to 2.1.3Jackie Huang
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20libtevent: upgrade to 0.9.25Jackie Huang
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20libldb: upgrade to 1.1.21Jackie Huang
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20libtdb: upgrade to 1.3.7Jackie Huang
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-20tcpdump: add PACKAGECONFIG for libcap-ngRoy Li
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-14cifs-utils: add PACKAGECONFIG for cifsidmapMartin Jansa
* cifs.idmap links with keyutils as log.do_package shows: DEBUG: cifs-utils: Dependency libkeyutils.so.1 requires package keyutils (used by files: /home2/mjansa/build/build-starfish-jethro/BUILD/work/h15-starfish-linux-gnueabi/cifs-utils/6.4-r0/packages-split/cifs-utils/usr/sbin/cifs.idmap) * that causes following QA issue when keyutils are autodetected from sysroot: WARNING: QA Issue: cifs-utils rdepends on keyutils, but it isn't a build dependency? [build-deps] Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-01-14cifs-utils: add PACKAGECONFIG for pamMartin Jansa
* otherwise there are unpackaged files: ERROR: QA Issue: cifs-utils: Files/directories were installed but not shipped in any package: /usr/lib/security /usr/lib/security/pam_cifscreds.so /usr/lib/security/.debug /usr/lib/security/.debug/pam_cifscreds.so Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install. cifs-utils: 4 installed and not shipped files. [installed-vs-shipped] Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-01-14netmap-modules: fix build with kernel < 3.17Martin Jansa
* define NETMAP_LINUX_ALLOC_NETDEV_4ARGS only when MACHINE is using kernel 3.17 or newer Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-01-05postfix.inc: fix start postfix failed while hostname is numericHongxu Jia
While hostname is numeric, start postfix failed ... root@qemux86-64:~# hostname 1.2.3.4 root@qemux86-64:~# systemctl restart postfix |Job for postfix.service failed because the control process exited with error code. See "systemctl status postfix.service" and "journalctl -xe" for details. root@qemux86-64:~# systemctl status postfix -l Dec 02 08:05:40 1.2.3.4 aliasesdb[535]: /usr/sbin/postconf: fatal: unable to use my own hostname Dec 02 08:05:41 1.2.3.4 aliasesdb[535]: newaliases: warning: valid_hostname: numeric hostname: 1.2.3.4 Dec 02 08:05:41 1.2.3.4 postfix/sendmail[537]: warning: valid_hostname: numeric hostname: 1.2.3.4 Dec 02 08:05:41 1.2.3.4 aliasesdb[535]: newaliases: fatal: unable to use my own hostname Dec 02 08:05:42 1.2.3.4 postfix[540]: warning: valid_hostname: numeric hostname: 1.2.3.4 Dec 02 08:05:42 1.2.3.4 postfix[540]: fatal: unable to use my own hostname ... Refer meta/recipes-core/initscripts/initscripts-1.0/hostname.sh in oe-core, add check_hostname.sh and invoke it before postfix start, if the hostname is invalid, set "localhost" to main.cf. Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05samba: move RDEPENDS of perl from samba to samba-pidlJens Rehsack
samba-pidl is the package containing the perl-extension, so RDEPENDS must include perl for samba-pidl, not for samba. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05samba: split packages similar to samba3Jens Rehsack
Since entire samba4 package is around 25MB, trying to save some space by splitting the package into several ones logically grouped as they were at samba3 in fido. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05net-snmp: fix the replacement in net-snmp-configRoy Li
when net-snmp-config is used to configure by other package, and fail since /libnl3 is not found, in fact, it should be -I/usr/include/libnl3, and is modified as /libnl3 incorrectly. instead of modify the net-snmp-config for target, the one under ${bindir_crossscripts} should be replaced with ${TAGING_INCDIR} Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05wireshark: package update to 2.0.1Armin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05iscsitarget: resolve build error if CONFIG_IPV6 config is not enabledJagadeesh Krishnanjanappa
The element skc_v6_daddr (in struct sock_common) is defined in kernel source only when CONFIG_IPV6 is enabled. Hence, access sk_v6_daddr element (i.e __sk_common.skc_v6_daddr) only when CONFIG_IPV6 is defined; to fix below error in world build: -- snip -- /home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/qemux86/kernel-source/include/net/sock.h:330:33: error: 'struct sock_common' has no member named 'skc_v6_daddr' -- CUT -- Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05libtalloc: fix SRC_URIKai Kang
It fails to fetch source of libtalloc: | ERROR: Fetcher failure: Fetch command failed with exit code 8, output: | https://www.samba.org/ftp/libtalloc/talloc-2.1.3.tar.gz: | 2015-12-21 10:22:09 ERROR 404: Not Found. Fix it by replace ${BPN} with original package name talloc. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05strongswan: install strongswan-swanctl systemd service by default.Chris Patterson
Matches start-on-boot behaviour of current strongswan.service. Signed-off-by: Chris Patterson <pattersonc@ainfosec.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05strongswan: add configure patch fix for systemdChris Patterson
Fixes strongswan configure script for systemd >= 209, where it merged libsystemd-journal and libsystemd-daemon into libsystemd. Signed-off-by: Chris Patterson <pattersonc@ainfosec.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05strongswan: add additional PACKAGECONFIG flagsChris Patterson
- Add aesni, charon, gmp, openssl, scep, stroke, swanctl, and systemd-charon. - Organize the packageconfig list alphabetically. - Update the default PACKAGECONFIG to match current defaults. - If swanctl is enabled, use strongswan-swanctl.service instead of strongswan.service. Signed-off-by: Chris Patterson <pattersonc@ainfosec.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05samba: add PACKAGECONFIG for valgrindWenzong Fan
* Add configure options '--without-valgrind' * Disable valgrind by default since it doesn't build for all targets This fixes build errors: ../source3/include/includes.h:156:31: fatal error: \ valgrind/memcheck.h: No such file or directory compilation terminated. Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05ctdb: add dependency on libldbMartin Jansa
* libldb is autodetected from sysroot: WARN: ctdb: ctdb rdepends on libtdb, but it isn't a build dependency? Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-05xl2tpd: fix warnings with gcc 5Kai Kang
When compile with gcc 5.x, xl2tpd complains warnings: | misc.h:68:20: warning: inline function 'swaps' declared but never defined | extern inline void swaps (void *, int); | ^ Backport patch to fix it. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04quagga: fix segment fault when stopping ospf6dQi.Chen@windriver.com
In ospf6_clean, the variable ospf6 might be NULL causing segment fault when stopping ospf6d. Check the variable before referencing it. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04net-snmp: apply patch for cross-compilationRafaël Carré
7fb5479 added the patch but did not apply it Rename patch to explicit it differentiate it from other patches Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04net-snmp: apply patch for cross-compilationRafaël Carré
7fb5479 added the patch but did not apply it Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04samba: make cyrus-sasl optionalJens Rehsack
Since waf doesn't allow override check results via environment, a patch is needed to remove the bad check when an optional feature is unwanted. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04libtevent: rework dependencies for deterministic buildJens Rehsack
Since waf configure infrastructure is a body blow compared to reasonable autoconf script from packager point of view, samba support libs need feature-disable-patches. This one is for libtevent removing libcap (introduced by libldap_r) and attr. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04libldb: allow chosing ldap dependency instead of hard requiring itJens Rehsack
Add a patch to remove the check for openldap but mark prove result negative unless ldap dependency is enabled explicitely. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04samba: fix typo distinguishing between plain sysv init and lsb initJens Rehsack
During fix for distinguishing between lsb flavoured sysv init and pure, on the rocks version, author introduced a typo. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04talloc: rename to libtalloc and cleanup dependency messJens Rehsack
To avoid errors when building dev-images (talloc-dev is missing), and to avoid insane empty packages for that, rename talloc -> libtalloc as libtevent shows. With that, remove dependencies to attr/xattr - unless explicitely enabled via PACKAGECONFIG. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2016-01-04mime-construct: move from meta-networking to meta-perlKai Kang
mime-construct only provides a perl script and depends on many perl modules that cause layer meta-networking depends on meta-perl. Move mime-construct from meta-networking to meta-perl to avoid the layer dependency. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2016-01-04mime-construct: update runtime dependenciesKai Kang
Update runtime dependencies of mime-construct: * drop WaitStat.pm and Signal.pm which are from libproc-waitstat-perl and its dependency libipc-signal-perl * add patch to return 0 for option '--help' * replace postfix with msmtp which is more lightweight * add perl modules which are required for mime-construct to run Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2015-11-30wireshark: update to version 2.0.0Armin Kuster
restore PE updated comments: QT is the new default GUI for the binary 'wireshark'. This mode is currently disabled in the build. We build with GTK as the default gui so the resulting binary is now wireshark-gtk. Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-11-30ufw: improve RRECOMMENDSRoy Li
ufw needs lots of netfilter module to run Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-11-30netmap-modules: Modules may not have the same arch as userspaceJackie Huang
Kernel modules may not have the same architecture as user space. So we tell INSANE_SKIP to skip checking the arch for the modules. This is consistent with other kernel modules and the kernel recipe. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-11-30netmap-modules: make deterministic builds for driversJackie Huang
The driver builds are optional, but for deterministic builds, we should should be able to explicitly enable/disable the builds for them in a proper place (maybe in BSP). But we can't use PACKAGECONFIG since there is no option for each driver, and the options are: --no-drivers do not compile any driver --no-drivers= do not compile the given drivers (comma sep.) --drivers= only compile the given drivers (comma sep.) So use NETMAP_DRIVERS to list the needed drivers and add proper configs to EXTRA_OECONF, the default is no drivers, and all supported drivers are listed in NETMAP_ALL_DRIVERS. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
2015-11-30ctdb: rdep on bashChristopher Larson
onnode is a shell script with bashisms and bash #!. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-14 09:26:14 +0000