diff options
Diffstat (limited to 'meta/classes/testimage.bbclass')
| -rw-r--r-- | meta/classes/testimage.bbclass | 70 |
1 files changed, 45 insertions, 25 deletions
diff --git a/meta/classes/testimage.bbclass b/meta/classes/testimage.bbclass index 00f0c29836..898248992c 100644 --- a/meta/classes/testimage.bbclass +++ b/meta/classes/testimage.bbclass @@ -3,6 +3,8 @@ # Released under the MIT license (see COPYING.MIT) inherit metadata_scm +inherit image-artifact-names + # testimage.bbclass enables testing of qemu images using python unittests. # Most of the tests are commands run on target image over ssh. # To use it add testimage to global inherit and call your target image with -c testimage @@ -34,6 +36,7 @@ TESTIMAGE_AUTO ??= "0" # TEST_OVERALL_TIMEOUT can be used to set the maximum time in seconds the tests will be allowed to run (defaults to no limit). # TEST_QEMUPARAMS can be used to pass extra parameters to qemu, e.g. "-m 1024" for setting the amount of ram to 1 GB. # TEST_RUNQEMUPARAMS can be used to pass extra parameters to runqemu, e.g. "gl" to enable OpenGL acceleration. +# QEMU_USE_KVM can be set to "" to disable the use of kvm (by default it is enabled if target_arch == build_arch or both of them are x86 archs) # TESTIMAGE_BOOT_PATTERNS can be used to override certain patterns used to communicate with the target when booting, # if a pattern is not specifically present on this variable a default will be used when booting the target. @@ -58,23 +61,22 @@ BASICTESTSUITE = "\ ping date df ssh scp python perl gi ptest parselogs \ logrotate connman systemd oe_syslog pam stap ldd xorg \ kernelmodule gcc buildcpio buildlzip buildgalculator \ - dnf rpm opkg apt weston" + dnf rpm opkg apt weston go rust" DEFAULT_TEST_SUITES = "${BASICTESTSUITE}" -# aarch64 has no graphics -DEFAULT_TEST_SUITES_remove_aarch64 = "xorg" # musl doesn't support systemtap -DEFAULT_TEST_SUITES_remove_libc-musl = "stap" +DEFAULT_TEST_SUITES:remove:libc-musl = "stap" # qemumips is quite slow and has reached the timeout limit several times on the YP build cluster, # mitigate this by removing build tests for qemumips machines. MIPSREMOVE ??= "buildcpio buildlzip buildgalculator" -DEFAULT_TEST_SUITES_remove_qemumips = "${MIPSREMOVE}" -DEFAULT_TEST_SUITES_remove_qemumips64 = "${MIPSREMOVE}" +DEFAULT_TEST_SUITES:remove:qemumips = "${MIPSREMOVE}" +DEFAULT_TEST_SUITES:remove:qemumips64 = "${MIPSREMOVE}" TEST_SUITES ?= "${DEFAULT_TEST_SUITES}" +QEMU_USE_KVM ?= "1" TEST_QEMUBOOT_TIMEOUT ?= "1000" TEST_OVERALL_TIMEOUT ?= "" TEST_TARGET ?= "qemu" @@ -84,7 +86,7 @@ TEST_RUNQEMUPARAMS ?= "" TESTIMAGE_BOOT_PATTERNS ?= "" TESTIMAGEDEPENDS = "" -TESTIMAGEDEPENDS_append_qemuall = " qemu-native:do_populate_sysroot qemu-helper-native:do_populate_sysroot qemu-helper-native:do_addto_recipe_sysroot" +TESTIMAGEDEPENDS:append:qemuall = " qemu-native:do_populate_sysroot qemu-helper-native:do_populate_sysroot qemu-helper-native:do_addto_recipe_sysroot" TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'cpio-native:do_populate_sysroot', '', d)}" TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'dnf-native:do_populate_sysroot', '', d)}" TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'createrepo-c-native:do_populate_sysroot', '', d)}" @@ -92,7 +94,7 @@ TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'ipk', 'opkg-utils-na TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'deb', 'apt-native:do_populate_sysroot package-index:do_package_index', '', d)}" TESTIMAGELOCK = "${TMPDIR}/testimage.lock" -TESTIMAGELOCK_qemuall = "" +TESTIMAGELOCK:qemuall = "" TESTIMAGE_DUMP_DIR ?= "${LOG_DIR}/runtime-hostdump/" @@ -125,12 +127,19 @@ testimage_dump_host () { netstat -an } +testimage_dump_monitor () { + query-status + query-block + dump-guest-memory {"paging":false,"protocol":"file:%s.img"} +} + python do_testimage() { testimage_main(d) } addtask testimage do_testimage[nostamp] = "1" +do_testimage[network] = "1" do_testimage[depends] += "${TESTIMAGEDEPENDS}" do_testimage[lockfiles] += "${TESTIMAGELOCK}" @@ -193,6 +202,7 @@ def testimage_main(d): import json import signal import logging + import shutil from bb.utils import export_proxies from oeqa.core.utils.misc import updateTestData @@ -228,9 +238,10 @@ def testimage_main(d): tdname = "%s.testdata.json" % image_name try: - td = json.load(open(tdname, "r")) - except (FileNotFoundError) as err: - bb.fatal('File %s Not Found. Have you built the image with INHERIT+="testimage" in the conf/local.conf?' % tdname) + with open(tdname, "r") as f: + td = json.load(f) + except FileNotFoundError as err: + bb.fatal('File %s not found (%s).\nHave you built the image with INHERIT += "testimage" in the conf/local.conf?' % (tdname, err)) # Some variables need to be updates (mostly paths) with the # ones of the current environment because some tests require them. @@ -303,20 +314,19 @@ def testimage_main(d): 'dump_dir' : d.getVar("TESTIMAGE_DUMP_DIR"), 'serial_ports': len(d.getVar("SERIAL_CONSOLES").split()), 'ovmf' : ovmf, + 'tmpfsdir' : d.getVar("RUNQEMU_TMPFS_DIR"), } if d.getVar("TESTIMAGE_BOOT_PATTERNS"): target_kwargs['boot_patterns'] = get_testimage_boot_patterns(d) - # TODO: Currently BBPATH is needed for custom loading of targets. - # It would be better to find these modules using instrospection. - target_kwargs['target_modules_path'] = d.getVar('BBPATH') - # hardware controlled targets might need further access target_kwargs['powercontrol_cmd'] = d.getVar("TEST_POWERCONTROL_CMD") or None target_kwargs['powercontrol_extra_args'] = d.getVar("TEST_POWERCONTROL_EXTRA_ARGS") or "" target_kwargs['serialcontrol_cmd'] = d.getVar("TEST_SERIALCONTROL_CMD") or None target_kwargs['serialcontrol_extra_args'] = d.getVar("TEST_SERIALCONTROL_EXTRA_ARGS") or "" + target_kwargs['testimage_dump_monitor'] = d.getVar("testimage_dump_monitor") or "" + target_kwargs['testimage_dump_target'] = d.getVar("testimage_dump_target") or "" def export_ssh_agent(d): import os @@ -364,6 +374,7 @@ def testimage_main(d): package_extraction(d, tc.suites) results = None + complete = False orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception) try: # We need to check if runqemu ends unexpectedly @@ -375,6 +386,7 @@ def testimage_main(d): except ValueError: pass results = tc.runTests() + complete = True except (KeyboardInterrupt, BlockingIOError) as err: if isinstance(err, KeyboardInterrupt): bb.error('testimage interrupted, shutting down...') @@ -382,22 +394,30 @@ def testimage_main(d): bb.error('runqemu failed, shutting down...') if results: results.stop() - results = None + results = tc.results finally: signal.signal(signal.SIGTERM, orig_sigterm_handler) tc.target.stop() # Show results (if we have them) - if not results: - bb.fatal('%s - FAILED - tests were interrupted during execution' % pn, forcelog=True) - configuration = get_testimage_configuration(d, 'runtime', machine) - results.logDetails(get_testimage_json_result_dir(d), - configuration, - get_testimage_result_id(configuration), - dump_streams=d.getVar('TESTREPORT_FULLLOGS')) - results.logSummary(pn) + if results: + configuration = get_testimage_configuration(d, 'runtime', machine) + results.logDetails(get_testimage_json_result_dir(d), + configuration, + get_testimage_result_id(configuration), + dump_streams=d.getVar('TESTREPORT_FULLLOGS')) + results.logSummary(pn) + + # Copy additional logs to tmp/log/oeqa so it's easier to find them + targetdir = os.path.join(get_testimage_json_result_dir(d), d.getVar("PN")) + os.makedirs(targetdir, exist_ok=True) + os.symlink(bootlog, os.path.join(targetdir, os.path.basename(bootlog))) + os.symlink(d.getVar("BB_LOGFILE"), os.path.join(targetdir, os.path.basename(d.getVar("BB_LOGFILE") + "." + d.getVar('DATETIME')))) + + if not results or not complete: + bb.fatal('%s - FAILED - tests were interrupted during execution, check the logs in %s' % (pn, d.getVar("LOG_DIR")), forcelog=True) if not results.wasSuccessful(): - bb.fatal('%s - FAILED - check the task log and the ssh log' % pn, forcelog=True) + bb.fatal('%s - FAILED - also check the logs in %s' % (pn, d.getVar("LOG_DIR")), forcelog=True) def get_runtime_paths(d): """ |