path: root/meta/recipes-multimedia/pulseaudio/pulseaudio/0003-card-move-profile-selection-after-pa_card_new.patch

From 0b98309fdbcd36fa92ab53e33c51b485b905e294 Mon Sep 17 00:00:00 2001
From: Tanu Kaskinen <tanuk@iki.fi>
Date: Fri, 23 Oct 2015 12:59:53 +0300
Subject: [PATCH 3/5] card: move profile selection after pa_card_new()

I want module-alsa-card to set the availability of unavailable
profiles before the initial card profile gets selected, so that the
selection logic can use correct availability information.
module-alsa-card initializes the jack state after calling
pa_card_new(), however, and the profile selection happens in
pa_card_new(). This patch solves that by moving parts of pa_card_new()
to pa_card_choose_initial_profile() and pa_card_put().

pa_card_choose_initial_profile() applies the profile selection policy,
so module-alsa-card can first call pa_card_new(), then initialize the
jack state, and then call pa_card_choose_initial_profile(). After that
module-alsa-card can still override the profile selection policy, in
case module-alsa-card was loaded with the "profile" argument. Finally,
pa_card_put() finalizes the card creation.

An alternative solution would have been to move the jack
initialization to happen before pa_card_new() and use pa_card_new_data
instead of pa_card in the jack initialization code, but I disliked
that idea (I want to get rid of the "new data" pattern eventually).

The order in which the initial profile policy is applied is reversed
in this patch. Previously the first one to set it won, now the last
one to set it wins. I think this is better, because if you have N
parties that want to set the profile, we avoid checking N times
whether someone else has already set the profile.

Upstream-Status: Accepted [expected in 10.0]

Signed-off-by: Tanu Kaskinen <tanuk@iki.fi>
---
 src/modules/alsa/module-alsa-card.c          | 32 +++++----
 src/modules/bluetooth/module-bluez4-device.c | 31 +++++----
 src/modules/bluetooth/module-bluez5-device.c |  2 +
 src/modules/macosx/module-coreaudio-device.c |  2 +
 src/modules/module-card-restore.c            | 36 +++++++---
 src/pulsecore/card.c                         | 99 +++++++++++++++++-----------
 src/pulsecore/card.h                         |  9 +++
 src/pulsecore/core.h                         |  1 +
 8 files changed, 143 insertions(+), 69 deletions(-)

diff --git a/src/modules/alsa/module-alsa-card.c b/src/modules/alsa/module-alsa-card.c
index d761683..1976230 100644
--- a/src/modules/alsa/module-alsa-card.c
+++ b/src/modules/alsa/module-alsa-card.c
@@ -671,7 +671,7 @@ int pa__init(pa_module *m) {
     struct userdata *u;
     pa_reserve_wrapper *reserve = NULL;
     const char *description;
-    const char *profile = NULL;
+    const char *profile_str = NULL;
     char *fn = NULL;
     bool namereg_fail = false;
 
@@ -799,16 +799,6 @@ int pa__init(pa_module *m) {
         goto fail;
     }
 
-    if ((profile = pa_modargs_get_value(u->modargs, "profile", NULL))) {
-        if (pa_hashmap_get(data.profiles, profile))
-            pa_card_new_data_set_profile(&data, profile);
-        else {
-            pa_log("No such profile: %s", profile);
-            pa_card_new_data_done(&data);
-            goto fail;
-        }
-    }
-
     u->card = pa_card_new(m->core, &data);
     pa_card_new_data_done(&data);
 
@@ -822,6 +812,26 @@ int pa__init(pa_module *m) {
             (pa_hook_cb_t) card_suspend_changed, u);
 
     init_jacks(u);
+
+    pa_card_choose_initial_profile(u->card);
+
+    /* If the "profile" modarg is given, we have to override whatever the usual
+     * policy chose in pa_card_choose_initial_profile(). */
+    profile_str = pa_modargs_get_value(u->modargs, "profile", NULL);
+    if (profile_str) {
+        pa_card_profile *profile;
+
+        profile = pa_hashmap_get(u->card->profiles, profile_str);
+        if (!profile) {
+            pa_log("No such profile: %s", profile_str);
+            goto fail;
+        }
+
+        pa_card_set_profile(u->card, profile, false);
+    }
+
+    pa_card_put(u->card);
+
     init_profile(u);
     init_eld_ctls(u);
 
diff --git a/src/modules/bluetooth/module-bluez4-device.c b/src/modules/bluetooth/module-bluez4-device.c
index a2de525..13fb7ab 100644
--- a/src/modules/bluetooth/module-bluez4-device.c
+++ b/src/modules/bluetooth/module-bluez4-device.c
@@ -2238,7 +2238,7 @@ static int add_card(struct userdata *u) {
     pa_bluez4_profile_t *d;
     pa_bluez4_form_factor_t ff;
     char *n;
-    const char *default_profile;
+    const char *profile_str;
     const pa_bluez4_device *device;
     const pa_bluez4_uuid *uuid;
 
@@ -2298,16 +2298,6 @@ static int add_card(struct userdata *u) {
     *d = PA_BLUEZ4_PROFILE_OFF;
     pa_hashmap_put(data.profiles, p->name, p);
 
-    if ((default_profile = pa_modargs_get_value(u->modargs, "profile", NULL))) {
-        if (pa_hashmap_get(data.profiles, default_profile))
-            pa_card_new_data_set_profile(&data, default_profile);
-        else {
-            pa_log("Profile '%s' not valid or not supported by device.", default_profile);
-            pa_card_new_data_done(&data);
-            return -1;
-        }
-    }
-
     u->card = pa_card_new(u->core, &data);
     pa_card_new_data_done(&data);
 
@@ -2319,6 +2309,25 @@ static int add_card(struct userdata *u) {
     u->card->userdata = u;
     u->card->set_profile = card_set_profile;
 
+    pa_card_choose_initial_profile(u->card);
+
+    /* If the "profile" modarg is given, we have to override whatever the usual
+     * policy chose in pa_card_choose_initial_profile(). */
+    profile_str = pa_modargs_get_value(u->modargs, "profile", NULL);
+    if (profile_str) {
+        pa_card_profile *profile;
+
+        profile = pa_hashmap_get(u->card->profiles, profile_str);
+        if (!profile) {
+            pa_log("No such profile: %s", profile_str);
+            return -1;
+        }
+
+        pa_card_set_profile(u->card, profile, false);
+    }
+
+    pa_card_put(u->card);
+
     d = PA_CARD_PROFILE_DATA(u->card->active_profile);
 
     if (*d != PA_BLUEZ4_PROFILE_OFF && (!device->transports[*d] ||
diff --git a/src/modules/bluetooth/module-bluez5-device.c b/src/modules/bluetooth/module-bluez5-device.c
index 84e6d55..498d0e1 100644
--- a/src/modules/bluetooth/module-bluez5-device.c
+++ b/src/modules/bluetooth/module-bluez5-device.c
@@ -1953,6 +1953,8 @@ static int add_card(struct userdata *u) {
 
     u->card->userdata = u;
     u->card->set_profile = set_profile_cb;
+    pa_card_choose_initial_profile(u->card);
+    pa_card_put(u->card);
 
     p = PA_CARD_PROFILE_DATA(u->card->active_profile);
     u->profile = *p;
diff --git a/src/modules/macosx/module-coreaudio-device.c b/src/modules/macosx/module-coreaudio-device.c
index 6c9e55d..d91c656 100644
--- a/src/modules/macosx/module-coreaudio-device.c
+++ b/src/modules/macosx/module-coreaudio-device.c
@@ -821,6 +821,8 @@ int pa__init(pa_module *m) {
     pa_card_new_data_done(&card_new_data);
     u->card->userdata = u;
     u->card->set_profile = card_set_profile;
+    pa_card_choose_initial_profile(u->card);
+    pa_card_put(u->card);
 
     u->rtpoll = pa_rtpoll_new();
     pa_thread_mq_init(&u->thread_mq, m->core->mainloop, u->rtpoll);
diff --git a/src/modules/module-card-restore.c b/src/modules/module-card-restore.c
index 7545aa5..718a0dd 100644
--- a/src/modules/module-card-restore.c
+++ b/src/modules/module-card-restore.c
@@ -551,16 +551,6 @@ static pa_hook_result_t card_new_hook_callback(pa_core *c, pa_card_new_data *new
     if (!(e = entry_read(u, new_data->name)))
         return PA_HOOK_OK;
 
-    if (e->profile[0]) {
-        if (!new_data->active_profile) {
-            pa_card_new_data_set_profile(new_data, e->profile);
-            pa_log_info("Restored profile '%s' for card %s.", new_data->active_profile, new_data->name);
-            new_data->save_profile = true;
-
-        } else
-            pa_log_debug("Not restoring profile for card %s, because already set.", new_data->name);
-    }
-
     /* Always restore the latency offsets because their
      * initial value is always 0 */
 
@@ -590,6 +580,30 @@ static pa_hook_result_t card_new_hook_callback(pa_core *c, pa_card_new_data *new
     return PA_HOOK_OK;
 }
 
+static pa_hook_result_t card_choose_initial_profile_callback(pa_core *core, pa_card *card, struct userdata *u) {
+    struct entry *e;
+
+    if (!(e = entry_read(u, card->name)))
+        return PA_HOOK_OK;
+
+    if (e->profile[0]) {
+        pa_card_profile *profile;
+
+        profile = pa_hashmap_get(card->profiles, e->profile);
+        if (profile) {
+            pa_log_info("Restoring profile '%s' for card %s.", card->active_profile->name, card->name);
+            pa_card_set_profile(card, profile, true);
+        } else {
+            pa_log_debug("Tried to restore profile %s for card %s, but the card doesn't have such profile.",
+                         e->profile, card->name);
+        }
+    }
+
+    entry_free(e);
+
+    return PA_HOOK_OK;
+}
+
 static pa_hook_result_t card_preferred_port_changed_callback(pa_core *core, pa_card_preferred_port_changed_hook_data *data,
                                                              struct userdata *u) {
     struct entry *e;
@@ -634,6 +648,8 @@ int pa__init(pa_module*m) {
     u->module = m;
 
     pa_module_hook_connect(m, &m->core->hooks[PA_CORE_HOOK_CARD_NEW], PA_HOOK_EARLY, (pa_hook_cb_t) card_new_hook_callback, u);
+    pa_module_hook_connect(m, &m->core->hooks[PA_CORE_HOOK_CARD_CHOOSE_INITIAL_PROFILE], PA_HOOK_NORMAL,
+                           (pa_hook_cb_t) card_choose_initial_profile_callback, u);
     pa_module_hook_connect(m, &m->core->hooks[PA_CORE_HOOK_CARD_PUT], PA_HOOK_NORMAL, (pa_hook_cb_t) card_put_hook_callback, u);
     pa_module_hook_connect(m, &m->core->hooks[PA_CORE_HOOK_CARD_PREFERRED_PORT_CHANGED], PA_HOOK_NORMAL, (pa_hook_cb_t) card_preferred_port_changed_callback, u);
     pa_module_hook_connect(m, &m->core->hooks[PA_CORE_HOOK_CARD_PROFILE_CHANGED], PA_HOOK_NORMAL, (pa_hook_cb_t) card_profile_changed_callback, u);
diff --git a/src/pulsecore/card.c b/src/pulsecore/card.c
index 0ac70b9..a0c3d93 100644
--- a/src/pulsecore/card.c
+++ b/src/pulsecore/card.c
@@ -176,38 +176,56 @@ pa_card *pa_card_new(pa_core *core, pa_card_new_data *data) {
     c->preferred_input_port = data->preferred_input_port;
     c->preferred_output_port = data->preferred_output_port;
 
-    if (data->active_profile)
-        if ((c->active_profile = pa_hashmap_get(c->profiles, data->active_profile)))
-            c->save_profile = data->save_profile;
+    pa_device_init_description(c->proplist, c);
+    pa_device_init_icon(c->proplist, true);
+    pa_device_init_intended_roles(c->proplist);
 
-    if (!c->active_profile) {
-        PA_HASHMAP_FOREACH(profile, c->profiles, state) {
-            if (profile->available == PA_AVAILABLE_NO)
-                continue;
+    return c;
+}
 
-            if (!c->active_profile || profile->priority > c->active_profile->priority)
-                c->active_profile = profile;
-        }
-        /* If all profiles are not available, then we still need to pick one */
-        if (!c->active_profile) {
-            PA_HASHMAP_FOREACH(profile, c->profiles, state)
-                if (!c->active_profile || profile->priority > c->active_profile->priority)
-                    c->active_profile = profile;
+void pa_card_choose_initial_profile(pa_card *card) {
+    pa_card_profile *profile;
+    void *state;
+    pa_card_profile *best = NULL;
+
+    pa_assert(card);
+
+    /* By default, pick the highest priority profile that is not unavailable,
+     * or if all profiles are unavailable, pick the profile with the highest
+     * priority regardless of its availability. */
+
+    PA_HASHMAP_FOREACH(profile, card->profiles, state) {
+        if (profile->available == PA_AVAILABLE_NO)
+            continue;
+
+        if (!best || profile->priority > best->priority)
+            best = profile;
+    }
+
+    if (!best) {
+        PA_HASHMAP_FOREACH(profile, card->profiles, state) {
+            if (!best || profile->priority > best->priority)
+                best = profile;
         }
-        pa_assert(c->active_profile);
     }
+    pa_assert(best);
 
-    pa_device_init_description(c->proplist, c);
-    pa_device_init_icon(c->proplist, true);
-    pa_device_init_intended_roles(c->proplist);
+    card->active_profile = best;
+    card->save_profile = false;
 
-    pa_assert_se(pa_idxset_put(core->cards, c, &c->index) >= 0);
+    /* Let policy modules override the default. */
+    pa_hook_fire(&card->core->hooks[PA_CORE_HOOK_CARD_CHOOSE_INITIAL_PROFILE], card);
+}
 
-    pa_log_info("Created %u \"%s\"", c->index, c->name);
-    pa_subscription_post(core, PA_SUBSCRIPTION_EVENT_CARD|PA_SUBSCRIPTION_EVENT_NEW, c->index);
+void pa_card_put(pa_card *card) {
+    pa_assert(card);
 
-    pa_hook_fire(&core->hooks[PA_CORE_HOOK_CARD_PUT], c);
-    return c;
+    pa_assert_se(pa_idxset_put(card->core->cards, card, &card->index) >= 0);
+    card->linked = true;
+
+    pa_log_info("Created %u \"%s\"", card->index, card->name);
+    pa_hook_fire(&card->core->hooks[PA_CORE_HOOK_CARD_PUT], card);
+    pa_subscription_post(card->core, PA_SUBSCRIPTION_EVENT_CARD|PA_SUBSCRIPTION_EVENT_NEW, card->index);
 }
 
 void pa_card_free(pa_card *c) {
@@ -218,15 +236,15 @@ void pa_card_free(pa_card *c) {
 
     core = c->core;
 
-    pa_hook_fire(&core->hooks[PA_CORE_HOOK_CARD_UNLINK], c);
-
-    pa_namereg_unregister(core, c->name);
-
-    pa_idxset_remove_by_data(c->core->cards, c, NULL);
+    if (c->linked) {
+        pa_hook_fire(&core->hooks[PA_CORE_HOOK_CARD_UNLINK], c);
 
-    pa_log_info("Freed %u \"%s\"", c->index, c->name);
+        pa_idxset_remove_by_data(c->core->cards, c, NULL);
+        pa_log_info("Freed %u \"%s\"", c->index, c->name);
+        pa_subscription_post(c->core, PA_SUBSCRIPTION_EVENT_CARD|PA_SUBSCRIPTION_EVENT_REMOVE, c->index);
+    }
 
-    pa_subscription_post(c->core, PA_SUBSCRIPTION_EVENT_CARD|PA_SUBSCRIPTION_EVENT_REMOVE, c->index);
+    pa_namereg_unregister(core, c->name);
 
     pa_assert(pa_idxset_isempty(c->sinks));
     pa_idxset_free(c->sinks, NULL);
@@ -298,20 +316,27 @@ int pa_card_set_profile(pa_card *c, pa_card_profile *profile, bool save) {
         return 0;
     }
 
-    if ((r = c->set_profile(c, profile)) < 0)
+    /* If we're setting the initial profile, we shouldn't call set_profile(),
+     * because the implementations don't expect that (for historical reasons).
+     * We should just set c->active_profile, and the implementations will
+     * properly set up that profile after pa_card_put() has returned. It would
+     * be probably good to change this so that also the initial profile can be
+     * set up in set_profile(), but if set_profile() fails, that would need
+     * some better handling than what we do here currently. */
+    if (c->linked && (r = c->set_profile(c, profile)) < 0)
         return r;
 
-    pa_subscription_post(c->core, PA_SUBSCRIPTION_EVENT_CARD|PA_SUBSCRIPTION_EVENT_CHANGE, c->index);
-
-    pa_log_info("Changed profile of card %u \"%s\" to %s", c->index, c->name, profile->name);
-
     c->active_profile = profile;
     c->save_profile = save;
 
     if (save)
         update_port_preferred_profile(c);
 
-    pa_hook_fire(&c->core->hooks[PA_CORE_HOOK_CARD_PROFILE_CHANGED], c);
+    if (c->linked) {
+        pa_log_info("Changed profile of card %u \"%s\" to %s", c->index, c->name, profile->name);
+        pa_hook_fire(&c->core->hooks[PA_CORE_HOOK_CARD_PROFILE_CHANGED], c);
+        pa_subscription_post(c->core, PA_SUBSCRIPTION_EVENT_CARD|PA_SUBSCRIPTION_EVENT_CHANGE, c->index);
+    }
 
     return 0;
 }
diff --git a/src/pulsecore/card.h b/src/pulsecore/card.h
index d4970e3..fd1fe0a 100644
--- a/src/pulsecore/card.h
+++ b/src/pulsecore/card.h
@@ -86,6 +86,8 @@ struct pa_card {
 
     pa_suspend_cause_t suspend_cause;
 
+    bool linked;
+
     void *userdata;
 
     int (*set_profile)(pa_card *c, pa_card_profile *profile);
@@ -128,6 +130,13 @@ void pa_card_new_data_set_preferred_port(pa_card_new_data *data, pa_direction_t
 void pa_card_new_data_done(pa_card_new_data *data);
 
 pa_card *pa_card_new(pa_core *c, pa_card_new_data *data);
+
+/* Select the initial card profile according to the configured policies. This
+ * must be called between pa_card_new() and pa_card_put(), after the port and
+ * profile availablities have been initialized. */
+void pa_card_choose_initial_profile(pa_card *card);
+
+void pa_card_put(pa_card *c);
 void pa_card_free(pa_card *c);
 
 void pa_card_add_profile(pa_card *c, pa_card_profile *profile);
diff --git a/src/pulsecore/core.h b/src/pulsecore/core.h
index 00d7f2f..802111b 100644
--- a/src/pulsecore/core.h
+++ b/src/pulsecore/core.h
@@ -118,6 +118,7 @@ typedef enum pa_core_hook {
     PA_CORE_HOOK_CLIENT_PROPLIST_CHANGED,
     PA_CORE_HOOK_CLIENT_SEND_EVENT,
     PA_CORE_HOOK_CARD_NEW,
+    PA_CORE_HOOK_CARD_CHOOSE_INITIAL_PROFILE,
     PA_CORE_HOOK_CARD_PUT,
     PA_CORE_HOOK_CARD_UNLINK,
     PA_CORE_HOOK_CARD_PREFERRED_PORT_CHANGED,
-- 
2.8.1