1 files changed, 0 insertions, 78 deletions
diff --git a/meta-emenlow/README b/meta-emenlow/README
deleted file mode 100644
index 862af5481b..0000000000
--- a/meta-emenlow/README
+++ /dev/null
@@ -1,78 +0,0 @@
-This README file contains information on building the meta-emenlow
-BSP layer using any of the supported machine configurations, and
-booting the images contained in the /binary directory.
-
-If you're only interested in booting the images in the /binary
-directory of a BSP tarball you've downloaded, there's nothing special
-to do - the appropriate images are already in the /binary directory
-depending on which BSP tarball you downloaded.
-
-Please see the corresponding sections below for details.
-
-
-Table of Contents
-=================
-
- I. Building the meta-emenlow BSP layer
-II. Booting the images in /binary
-
-
-I. Building the meta-emenlow BSP layer
-=======================================
-
-In order to build an image with BSP support for emenlow, you just need
-to check out the poky master branch.
-
-Having done that, you can build an emenlow image by adding the
-location of the meta-emenlow layer to bblayers.conf e.g.:
-
-  yocto/meta-emenlow \
-
-To enable the emenlow layer, add the emenlow MACHINE to local.conf:
-
-  MACHINE ?= "emenlow"
-
-You should then be able to build an emenlow image as such:
-
-  $ source poky-init-build-env
-  $ bitbake poky-image-sato-live
-
-At the end of a successful build, you should have a live image that
-you can boot from a USB flash drive (see instructions on how to do
-that below, in the section 'Booting the images from /binary').
-
-
-II. Booting the images in /binary
-=================================
-
-This BSP contains bootable live images, which can be used to directly
-boot Yocto off of a USB flash drive.
-
-Under Linux, insert a USB flash drive.  Assuming the USB flash drive
-takes device /dev/sdf, use dd to copy the live image to it.  For
-example:
-
-# dd if=poky-image-sato-live-emenlow-20101207053738.hddimg of=/dev/sdf
-# sync
-# eject /dev/sdf
-
-This should give you a bootable USB flash device.  Insert the device
-into a bootable USB socket on the target, and power on.  This should
-result in a system booted to the Sato graphical desktop.
-
-If you want a terminal, use the arrows at the top of the UI to move to
-different pages of available applications, one of which is named
-'Terminal'.  Clicking that should give you a root terminal.
-
-If you want to ssh into the system, you can use the root terminal to
-ifconfig the IP address and use that to ssh in.  The root password is
-empty, so to log in type 'root' for the user name and hit 'Enter' at
-the Password prompt: and you should be in.
-
-----
-
-If you find you're getting corrupt images on the USB (it doesn't show
-the syslinux boot: prompt, or the boot: prompt contains strange
-characters), try doing this first:
-
-# dd if=/dev/zero of=/dev/sdf bs=1M count=512